|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Condition: Used Location: Fleetwood, United States 12” WIDE CONVEYOR BELT. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. different condition than stated in the ad. If your item is. received in a different ... morecondition than stated (DOA, not. When we receive the product we will confirm item is. ).
Buy It Now
Condition: Used Location: Fleetwood, United States 12” WIDE CONVEYOR BELT. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. different condition than stated in the ad. If your item is. received in a different ... morecondition than stated (DOA, not. When we receive the product we will confirm item is. ).
Buy It Now
Condition: Used Location: Millersburg, United States This is just the hopper. Lift Tables. Country of Manufacture USA. Double wall. Stainless on the inside. Looks better on the inside than the outside. Part ... moreNumber N/A. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
Condition: Used Location: Millersburg, United States Dump Hoppers. Lift Tables. Outlet is 3" ID. 5" hole centers. Has a lid. Inside of tank is 21.5". We are dedicated to understanding the unique challenges ... moreand opportunities that each industry faces.
Buy It Now
Condition: Used Location: Wolcottville, United States This hopper is made of nonmagnetic stainless steel. The base is made of steel. The hopper part is 36x36" inside at the top. The straight sided section ... moreat the top is 14-1/4" deep, the overall depth is 26-3/4" inside. The hole at the bottom is 7x7". The slide gate at the bottom does not close the bottom off completely and will need some modifications if a gate is to be used. The lid hinge has a couple loose spot welds at the one end that should be redone, or you could drill a hole and put a small ss bolt in it. The lid also has some other dings and dents from use, but could be made to work fine with a little bit of TLC. The gas shocks do not hold the lid unless it is opened completely. .
Buy It Now
Condition: Used Location: El Paso, United States Hopper dims 16x16x12 In. Steel construction. Unit in picture is a sample and you will receive a equivalent unit. Overall dims 16x21x29 In. 28.0000 x26.0000 ... morex34.0000. Tested good.
Buy It Now
$795.00 Shipping Condition: Used Location: South El Monte, United States STAINLESS STEEL RIBBON BLENDER MIXER IN GREAT CONDITION APPROXIMATELY 6.5 CU FT TUB DIMENSIONS ARE 27” X 21” X 23”H 220V 1PH GEAR MOTOR WEG MOTOR 1.5 ... moreKW 2HP TESTED AND WORKING BEING SOLD AS IS TESTED AND WORKING NO RETURNS ACCEPTED ASK QUESTIONS PRIOR TO BIDDING $795 STANDARD SHIPPING FEES APPLY TO LOWER 48 STATES ONLY ADDITIONAL FEES APPLY TO A RESIDENCE OR LIMITED ACCESS OR LIFT GATE NEEDED ON DELIVERY
Buy It Now
Condition: Used Location: Millwood, United States Bin is 36" square with 5" straight side, 60° hopper with sight glass and level ports (1 1/2"NPTF). 34" floor to top of bin. Outlet: 12" × 12" flanged.
Buy It Now
Condition: Used Location: Antioch, United States Office 4193158999.
Buy It Now
Condition: Used Location: Millwood, United States 45° hopper with sight glass and low level port. Hopper is dented. The bin is 71.5" square with a 76" vertical side constructed from 11ga. Height at outlet: ... more12.5".
Buy It Now
Condition: Used Location: Willoughby, United States 15 CU FT WORKING CAPACITY. SANITARY STAINLESS STEEL TROUGH AND RIBBON. 30" WIDE X 36" LONG X 36" DEEP. HAS A TWIN ALSO FOR SALE. TEST RUNS GOOD. 3 PHASE ... more230 /460 VOLT.
Buy It Now
Condition: Used Location: Millwood, United States Bin is 30" square with a 60° hopper, vibrator mount, and 1 1/2"NPT HI/LO level ports. Outlet: 12" × 12" flanged. Flooded Capacity: 14.6 cu/ft.
Buy It Now
Condition: Used Location: Millwood, United States All carbon steel continuous mixer. Serial number: 42306-1883. Capacity: 11 cu ft working / 21.2 cu ft total / 159 gallons / 600 liters. Mixing chamber ... moreis 24"ø x 6'-6" long, with a total length of 10'-4".
Buy It Now
Condition: Used Location: Millersburg, United States Lift Tables. Country of Manufacture N/A. Single wall stainless. Available on select orders within USA lower 48 states. Bottom unload size is 1-1/2". Our ... moremission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
Condition: Used Location: Millersburg, United States Has magnet drawer. Part Number N/A. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving ... moremarketplace. LET'S STAY IN TOUCH. We are dedicated to understanding the unique challenges and opportunities that each industry faces.
Buy It Now
Condition: Used Location: Millwood, United States Bin is 30" square with a 60° hopper and 1 1/2"NPT HI/LO level ports. Top cover has a hinged access panel with sight glass & 4" O.D. sleeve inlet. Outlet: ... more12" × 12" flanged.
Buy It Now
Condition: Used Location: El Paso, United States Internal Tub Depth 20 In. Video Available.
Buy It Now
Condition: Used Location: Millwood, United States Bin is 36" square with 5" straight side a 60° hopper with sight glass and level ports (1 1/2"NPTF). 35" floor to top of bin.
Buy It Now
Condition: Used Location: Morgan Hill, United States Ft. maximum product density. PK V Blender 5705 - YouTube. Inspections available at Morgan Hill, CA 95037. Doubles may require the driver to unhook 1 trailer. ... morePaste link into a browser window:[isdntekvideo].
Buy It Now
Condition: Used Location: Millwood, United States Blender Wall Thickness: 0.103". Product Inlet Cone: Ø20" with locking hatch & gasket. Swing Radius: 32" max. (from shaft center). 10 cubic foot working ... morecapacity (190 LB/CF max. product density). 3HP V-belt and gear reduction drive with pneumatic disc brake.
Buy It Now
Condition: Used Location: Millwood, United States 45° hopper (for pellets) with sight glass and hi/ low level port. Open top 60" square bin constructed from 11ga. Inlet: 56" × 56". Flooded capacity is ... more115 cu/ft.
Buy It Now
Condition: Used Location: Willoughby, United States 4619& 4620- 75 CU.FT. STAINLESS STEEL DOUBLE RIBBON BLENDER- 42’ X 96’ X 45’ DEEP- 90’ OVERALL HEIGHT- 4’ SHAFT DIAMETER- 2.5’ OUTER RIBBON. 3’ INNER ... moreRIBBON- 8’ CENTER DISCHARGE C/W MANUAL BUTTERFLY VALVE- 10’ OVERALL LENGTH- 30HP. 575 VOLT DRIVE- APPROX. 50 RPM- CHAIN AND GUARD ARE MISSING- DIRVES FOR THE BLENDERS ARE MOUNTED ON A COMMON BASE All items are F.O.B. Location and are sold AS IS. We Ship Worldwide. Contact us today for a free shipping quote! All descriptions are a reflection of the item to the best of our knowledge and are subject to change. To buyers wishing to pay by credit card. A 3% processing fee will be added to the total amount of the final invoice. Please contact Christopher Barten at or call 1-800-465-3055 for more information.
Buy It Now
Condition: Used Location: Millwood, United States Used Imperial Industries Silo 12' Dia. X 60' High 5,930 Cu/Ft. Sherwin Williams high solids catalyzed white epoxy finish for the interior. Built in 2004. ... moreDesigned for Bulk density: 35 PCF. ITEM #: 19264.
Buy It Now
Condition: Used Location: Millwood, United States Used 115 cu. All prices are FOB Millwood WV unless otherwise noted. Demonstration video on file. Weight = 6,600 lbs.
Buy It Now
Condition: Used Location: Millwood, United States Bin is 47" square with 15" straight side, 45° hopper with sight glass and level ports (1 1/2"NPTF). 41" floor to top of bin. Flooded Capacity: 33 cu/ft. ... moreOutlet: 12" × 12" flanged.
Buy It Now
Condition: New Location: Ontario, United States 4786& 4787- BLENDER. RIBBON, 60 CU. FT. DOUBLE RIBBON, STAINLESS STEEL, SANITARY-CUBIC FEET WORKING CAPACITY: 60-MANUFACTURER: WALTER EQUIP. MODEL: ... moreR60-STAINLESS STEEL. SANITARY CONSTRUCTION-BOWL 96" LONG X 37" WIDE X 42" DEEP-3" X 3/8" INNER RIBBON-2" X 3/8" OUTER RIBBON-OUT BOARD BEARINGS-AIR OPERATED SLIDE GATE DISCHARGE-DRIVE: GEARMOTOR: 20 H.P. 575 VOLT-APPROXIMATELY 38 RPM-LAST USED FOR BLENDING CAKE MIXES All items are F.O.B. Location and are sold AS IS. We Ship Worldwide. Contact us today for a free shipping quote! All descriptions are a reflection of the item to the best of our knowledge and are subject to change. To buyers wishing to pay by credit card. A 3% processing fee will be added to the total amount of the final invoice. Please contact Christopher Barten at or call 1-800-465-3055 for more information.
Buy It Now
Condition: Used Location: Morgan Hill, United States Ft. capacity, serial number 181090, maximum density 65 lbs. Inspections available at Morgan Hill, CA 95037. Doubles may require the driver to unhook 1 ... moretrailer. AS-IS, WHERE-IS?. This item may be missing necessary hardware / manuals / inserts/ power cords/ box covers/ accessories/ remotes/ wrenches/ chucks/ keys/ warranty cards/ bar codes/etc.
Buy It Now
Condition: Used Location: Millwood, United States Stainless steel mixing chamber with welded-on carbon steel flanges. The straight section is 14"Ø X 5" long. The assembled length of the chamber is 15". ... moreThe three sections and end covers are clamped.
Buy It Now
Condition: New Location: Temecula, United States STAINLESS STEEL CONSTRUCTION. OTHER SIZES AVAILABLE! FROM 2.5 CU FT - 450 CU FT. SOLID STAINLESS STEEL SHAFT. FREIGHT NOT INCLUDED IN PRICE. ONE YEAR ... moreWARRANTY. 1 YEAR PARTS WARRANTY AGAINST MANUFACTURE DEFECTS.
Buy It Now
Condition: Used Location: Canada Enviro Solutions | | | 210 696 6300 Durco Brand Filter Press Durco Quadrapress Volume: 15 cubic feet Plates: 800mm NCGR Cake: 2 inches(50mm) FOB San Antonio. ... moreTX Price: $16.000.00 USD
Buy It Now
Condition: Used Location: Aiken, United States Gemco Double Cone Blenders Stainless Steel 125 lbs/cu. Model Gemcomatic Blender. Manufactured in 2018. Unit was Removed from a on going production line ... moreMore Pictures Upon Request. 15 HP, (see pictures).
Buy It Now
Condition: Used Location: Broomfield, United States 7 cubic foot Roto Finish self unload bowl with hydraulic lift gate.
Buy It Now
Condition: Used Location: Millwood, United States ITEM #: 16873.
Buy It Now
Condition: Used Location: Pedricktown, United States Used Marion 30 cu.Ft. Paddle Blender, Stainless Steel Sanitary construction. Driven by a 10 HP, 208/360 volt, 60 cyc, 1770 rpm motor into gear reducer. ... moreTrough is 36" wide x 48" lgth. Overall is 8'2" L, 4'3" W, 4'4" H. 8" Outlet.
Buy It Now
Condition: Used Location: Millwood, United States Blender Cylinder is 77"Ø X 19" in length. 15HP helical gearmotor & bull gear drive. Demonstration video on file.
Buy It Now
Condition: Used Location: Canada Description Manufacturer Patterson Kelly 20 CU.FT. Twin Shell"V" Blender. Shell is constructed of 316 Stainless Steel with the inside polished ... moreto a mirror finish"Sanitary grade" Rated at 60 lbs. per cubic ft. It has cotterless hitch pins on the covers for easy opening. Electric: 2 hp. 1765 rpm. The unit is mounted to a standard A-frame constructed of carbon steel and painted. S/N 205148 If you have any questions. Please contact Frank at cell 856-491-0637 or email ecrecon@fjb.com You may be interested in other Industrial Equipment we have listed on Ebay. Click the link below to go into our Ebay store and view items. When in the Store. Be sure and sign up for our Newletter that sends you our new listings automatically. lt Ecrecon Ebay Store MACHINE SAFETY: It is the users responsibility to provide proper saftety devices. Procedures and equipment to safegaurd the machine, or machines, to conform to Federal, State and Local Government Saftey Standards and all Industry Safety Standards. Indemnification: High Bidder/Buyer Agrees to Idemnify and hold harmless Seller of and from any and all claims or liabilities, warnings, or recommendations available from the original manufacturer, or by failure of the user to comply with Federal, State, and Local Laws applicable to such equipment including the Occupatioal Safety and Health Act of 1970. The high bidder agrees to there terms and conditions! Thank You! Price and Availbility are subject to change without notice! The BUYER PAYS ALL SHIPPING COSTS. Everything is offered'As is Where is" in Pedricktown. NJ 08067, unless otherwise noted. Contact us for a shipping quote! We accept PayPal. Cashier Checks and Money orders for all items. Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*211fbc%3E-13ee7e13cab-0xf6-
Buy It Now
Condition: Used Location: Millwood, United States ITEM #: 15362.
Buy It Now
Condition: Used Location: Pedricktown, United States See Pictures Below: 2 cu.ft. Patterson Kelley Stainless Steel Twin Shell V Blender 300 lbs perCu.Ft. If you have any questions. Please contact Frank at ... morecell 856-491-0637 or email ecrecon@fjb.com You may be interested in other Industrial Equipment we have listed on Ebay. Click the link below to go into our Ebay store and view items. When in the Store. Be sure and sign up for our Newletter that sends you our new listings automatically. lt Ecrecon Ebay Store MACHINE SAFETY: It is the users responsibility to provide proper saftety devices. Procedures and equipment to safegaurd the machine, or machines, to conform to Federal, State and Local Government Saftey Standards and all Industry Safety Standards. Indemnification: High Bidder/Buyer Agrees to Idemnify and hold harmless Seller of and from any and all claims or liabilities, warnings, or recommendations available from the original manufacturer, or by failure of the user to comply with Federal, State, and Local Laws applicable to such equipment including the Occupatioal Safety and Health Act of 1970. The high bidder agrees to there terms and conditions! Thank You! Price and Availbility are subject to change without notice! The BUYER PAYS ALL SHIPPING COSTS. Everything is offered'As is Where is" in Pedricktown. NJ 08067, unless otherwise noted. Contact us for a shipping quote! We accept PayPal. Cashier Checks and Money orders for all items. Powered by
Buy It Now
Condition: Used Location: Cedarburg, United States Coyote Shot Blaster - Centrifugal Wheel - Finishing Machine with Continuous Rubber Belt for Tumble Blast Operation. - THE 5 HP MOTOR WHICH DRIVES THE ... moreCENTRIFUGAL SHOT BLAST WHEEL IS MISSING & THEREFORE IS NOT INCLUDED WITH THE UNIT!
Buy It Now
Condition: Used Location: Millersburg, United States This unit has a Shini Venturi loader. The glass tube is broken. Hopper is around 3.5 Cubic Feet. Country of Manufacture N/A. Part Number N/A. x 28.00 ... morein. x 109.00 in. Used, in Good Working Condition.
Buy It Now
Condition: Used Location: Ford City, United States Quench system.
Buy It Now
Condition: Used Location: Boyers, United States We have for sale a used Impec - MPE 2748 s/n 094-0062 Paddle mixer/agitator dryer. It is jacketed. Has a 10 HP drive motor. 304LSS Comes as you see it ... morein the photos. We don't have any history with it or know it's history. You get all you see in the phots. Look at all of the photos. Had National board tag also. We will load on your truck. You are welcome to come in and inspect the system. Thank you for looking. Mike Tenney - Tenney Equipment Company
Buy It Now
Condition: Used Location: Millwood, United States 60"Ø with 7' long straight side. Sloped top cover with 17"Ø flanged inlet port. High and low level indication ports. 60° bottom cone with removable access ... morepanel and 4"Ø sleeve port. Overall height of unit: 16'-8".
Buy It Now
Condition: New Location: Ontario, United States NEW 2.5 cu. ft. Double Ribbon Blender. • Sanitary T-304 Stainless Steel Construction. Motor：SEW/NORD Drive Material：304 Standard or 316 Stainless Steel ... moreFinish：High-Polished Sanitary Finish Legs：Adjustable stainless steel legs.
Buy It Now
Condition: Used Location: Cincinnati, United States ROSEMONT VIBRATORY FINISHING BOWL. Capacity: 5 Cu. Batch Type. 5 HP Motor. MODEL: RB-10-5. Chamber Width: 10". Chamber Depth: 10". SERIAL NUMBER: 2598.
Buy It Now
Condition: Used Location: Millwood, United States Bin is 30" square with a 60° hopper, vibrator mount, and 1 1/2"NPT HI/LO level ports. Top cover has a hinged access panel with sight glass & two- 6" O.D. ... moresleeve inlet. Outlet: 12" × 12" flanged.
Buy It Now
Condition: Used Location: Millwood, United States TOP HAS A 24" SQUARE FLANGED INLET, THREE LEVEL PROBES, 4" INLET PNEUMATIC VENT LINE.
Buy It Now
Condition: Used Location: Lake Zurich, United States Used 94 CU. FT. Stainless Steel Vertical Blender - Approx. Approximate Capacity At 35 LBS/CU FT - 3,300 LBS. Chain Driven Through Right Angle Gearbox. ... moreCarbon Steel Legs. This is used machinery sold "as is".
Buy It Now
Condition: Used Location: Millwood, United States Stainless steel single wall cone shell with two-zone dimple-plated jacketing (non-rated). Ø14" stainless steel orbiting, mixing auger with pintle bearing. ... moreBolted top cover supports the auger & orbiting drives and a 12" X 24" flanged product inlet.
Buy It Now
Condition: Used Location: Millwood, United States (Wall thickness). 3HP helical geared mixer drive (230/460V, 60Hz, 3ph AC). Single, cone-shaped outer ribbon with slanted plywood paddles (29RPM). Pre-wired ... morethrough a NEMA motor starter. Weight = 1,097 LBS.
Buy It Now
Condition: Used Location: Willoughby, United States GRACE MACHINERY SIZE 50 INSULATED PADDLE BLENDER MIXER. Type: PADDLE BLENDER. DRAIN, S/S LIFT COVER, HEAVY DUTY S/S BLADE MIXERS CONSISTING OF (4) 4" ... morex 3" S/S BARS ON A HORIZONTAL S/S SHAFT, MOTOR & GEAR DRIVE NEED REPLACED.
Buy It Now
Condition: Used Location: Millwood, United States Bin wall is constructed from 12GA stainless steel sheet. The size of the bin is 41" X 48". Weight = 698 LBS. One skid, 58" L x 52" W x 70" H.
Buy It Now
Condition: Used Location: Millwood, United States Bin is 30" square with a 60° hopper and 1 1/2"NPT HI/LO level ports. Top cover has a hinged access panel with sight glass & 4" O.D. sleeve inlet. Outlet: ... more12" × 12" flanged.
Buy It Now
Condition: Used Location: Millwood, United States 15HP v-belt & torque-arm gear reducer drive. U-trough paddle mixer with welded mild steel construction. Horizontal shaft, 4- center pitched paddles with ... morecurved edge. Bolted, stainless steel top cover with 19.5" X 42" hinged panel, 16" product inlet sleeve & 4" vent port.
Buy It Now
Condition: Used Location: Painesville, United States Littleford Lodige FKM-2000-E 43 cu. » One (1) used Littleford Lodige Plow Mixer. » Working capacity: 43 cu. » Total capacity: 75 cu. » 75 HP gear reduced ... moredrive. » Two hinged front access doors: 20" x 20".
Buy It Now
Condition: New Location: Ontario, United States 4786& 4787- BLENDER. RIBBON, 60 CU. FT. DOUBLE RIBBON, STAINLESS STEEL, SANITARY-CUBIC FEET WORKING CAPACITY: 60-MANUFACTURER: WALTER EQUIP. MODEL: ... moreR60-STAINLESS STEEL. SANITARY CONSTRUCTION-BOWL 96" LONG X 37" WIDE X 42" DEEP-3" X 3/8" INNER RIBBON-2" X 3/8" OUTER RIBBON-OUT BOARD BEARINGS-AIR OPERATED SLIDE GATE DISCHARGE-DRIVE: GEARMOTOR: 20 H.P. 575 VOLT-APPROXIMATELY 38 RPM-LAST USED FOR BLENDING CAKE MIXES All items are F.O.B. Location and are sold AS IS. We Ship Worldwide. Contact us today for a free shipping quote! All descriptions are a reflection of the item to the best of our knowledge and are subject to change. To buyers wishing to pay by credit card. A 3% processing fee will be added to the total amount of the final invoice. Please contact Christopher Barten at or call 1-800-465-3055 for more information.
Buy It Now
Condition: Used Location: Millwood, United States 5 cubic foot capacity hopper with hinged clean-out panel. Conveying air exits the top of the hopper through a washable filter. Vertical Height of hopper: ... more77". Pick-up line size: 2"Ø.
Buy It Now
Condition: Used Location: Pedricktown, United States 23.5" x 4' wide x 2' straight side depth. (2) Approx. outlets with slide gate valves. Hinged lid. Price and availability are subject to change without ... morenotice. All machines are listed "as is". ITEM# TAN-819.
Buy It Now
Free Shipping Condition: New Location: Charlestown, United States Save counter space with this compact, 1.1 cubic foot, 1,000 watt stainless steel microwave oven. Its compact footprint allows you to fit it into tight ... morecorners and onto cramped countertops, making it ideal for dorm rooms, offices, RVs, tiny homes or anywhere you might need to cook food fast. Electronic control panel features six one-touch cook settings: Baked Potato, Beverage, Frozen Dinner, Pizza, Popcorn and Reheat for quick and easy operation. Standard cook by power level and time as well as defrost by weight and time functionality, along with a handy "Add 30-seconds" control round out your options. Removable glass turntable simplifies cleaning tasks.
Buy It Now
Condition: New Location: Corona, United States ALL STAINLESS STEEL CONSTRUCTION. OTHER SIZES AVAILABLE! FROM 1.5 CU FT - 450 CU FT. 2-1/2" SOLID SHAFT. FREIGHT NOT INCLUDED IN PRICE. 1 YEAR PARTS WARRANTY ... moreON MANUFACTURE DEFECTS. CALL FOR CURRENT INVENTORY AND AVAILABILITY.
|
|
|
|
Filter Press 24" SPERRY 5 Cu Ft. 18 chamber Type 31
Filter Press 24" SPERRY 5 Cu Ft. 18 chamber Type 31 with 6" Auger Screw discharge and gear pumps Manufacture: SPERRY Size: 24" 630mm Serial No. 66697 Type 31 Capacity: 5 Cu Ft Chambers: 18 Screw Auger: 6" with 6" x 6" Discharge Auger Drive: 1 Hp 208/230/460 Volt/ 60 Hz/ 3 phase Operating Pressure: 100 psi Product/ Use: Last used in a food operation Closure:Manual Gear Pump# 1: 1 Hp/ 1140 rpm/ 208/230/460 Volt/ 60 Hz/ 3 phase Gear Pump# 2: 1 Hp/ 1450 rpm/ 208/230/460 Volt/ 60 Hz/ 3 phase Platform: Size 110" L x 84" Wide x 40" elevation For More Information EMAIL tesales@used-equipment.com or Call Kevin at(903) 355-1409
|
|
|
ACS 6-10 Cu Ft Expandable Air/Hydraulic Filter Press (FP2140)
Inventory# FP2140 Manufacturer: ACS Cu.Ft. 6 Number Plates: 13 Plate Size(mm) 800 Gasketed/NonGasketed: Gasketed Style: Air Over Hydraulic OAD: 120"L x 45"W x 65"H Max Filtration: 100 Max Hydraulic: 3800 Plate Shifter: No Description: Used Filter Press 6 cubic foot expandable to 10. For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
|
Filter Press 24" SPERRY 5 Cu Ft. with Screw Conveyor & Pumps 18 chamber, Type 31
Filter Press 24" SPERRY 5 Cu Ft. with Screw Conveyor& Pumps 18 chamber. Type 31 Manufacture: SPERRY Size: 24" 630mm Serial No. 66697 Type 31 Capacity: 5 Cu Ft Chambers: 18 Screw Auger: 6" with 6" x 6" Discharge Auger Drive: 1 Hp 208/230/460 Volt/ 60 Hz/ 3 phase Operating Pressure: 100 psi Product/ Use: Last used in a food operation Closure:Manual Gear Pump# 1: 1 Hp/ 1140 rpm/ 208/230/460 Volt/ 60 Hz/ 3 phase Gear Pump# 2: 1 Hp/ 1450 rpm/ 208/230/460 Volt/ 60 Hz/ 3 phase Platform: Size 110" L x 84" Wide x 40" elevation For More Information EMAIL Call Kevin at(903) 355-1409
|
|
|
DeLaval chip wringer 2.5 cu.ft. with timer
Chip Extractor/ Wringer 2.5 cu.ft. 230v 3phase with timer up to 12hrs. also has lifting bail Attached to base for easy moving around Weight 1400lbs.
|
|
|
1.05 cu ft filter press JWI 470 mm Recessed gasketed poly plates ARO 2" pump
J. Little Mercer Co. Inc. Stock no. C-2554 JWI 470mm Filter Press Recessed gasketed 2" center feed poly plates 7 chambers 18 3/4" square plates w/4) 1 1/4" corner outlets Air/hydraulic controls with Stock no. P-2504 ARO 2" poly diaphragm pump air powered. Teflon diaphragms O/a 32" x 57" long x 52" tall with plumbing Tested in operational condition! Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted, Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore ... morewe reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping. this auction is for one filter press. several available. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14206a0fea3-0xf8-
|
|
|
11.8 cu ft filter press Avery 1000 mm Recessed non-gasketed poly plates
J. Little Mercer Co. Inc. AVERY FILTER 1000 MM FILTER PRESS Stock no. C-2436 Avery Filter 1000 mm. 11.8 cu. ft. Recessed non-gasketed poly plates 15 chambers 39" square Kilco plates w/4) 2" in/out Air/hydraulic controls Milwaukee cylinder rated for 5.000 psi O/a 50" x 13' long x 51" tall We will load on a flatbed(bestway to ship) Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted, Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel ... morean auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping. this auction is for one filter press. several available.
|
|
|
7 CU. FT. ENVIROTECH FILTER PRESS - 630 MM - CGR
ARNOLD EQUIPMENT COMPANY INVENTORY#7750: 1) used approx. 7 cu. ft. Envirotech Filter Press. 23) 630 mm caulked. Gasketed& recessed polypropylene plates. 32 mm cake thickness. Center feed with four corner closed delivery. Automatic closure. Press is being offered as-is at price below with reconditioning available for an additional charge(Please inquire) Reconditioning would include cleaning& re-painting, re-cloth, re-gasket(if necessary) check cylinder& hydraulic system. OAD: 121 in. long x 40 in. wide x 65 in. high. F.O.B. CLEVELAND, OH
|
|
|
5.5 CU. FT. JWI FILTER PRESS - POLY PRO - 630 MM - C.G.R.
ARNOLD EQUIPMENT COMPANY INVENTORY#6863: 1) used approx. 5.5 cu. ft. JWI Filter Press. Model 630G32-17-5DN. Serial#3907. With(19) 630 mm gasketed polypropylene plates, 1& 3 button sequence. 32 mm recess. Automatic hydraulic closure. Center feed and four corner return. Maximum filter pressure 100 psi. Maximum closing pressure 4450 psi. Unit was in service until plant shutdown in April 2010. This press is being offered either as-is at the price below.Overall Dimensions: 107 in. L x 35 in. W x 52 in. T. Reconditioning is available for an additional cost. F.O.B. CLEVELAND, OH
|
|
|
5 CU. FT. DIAGENEX FILTER PRESS - 630 mm - AUTOMATIC - C.G.R.
ARNOLD EQUIPMENT COMPANY INVENTORY#6618: 1) used 5 cu. ft. Diaganex filter Press. With(16) 630 mm gasketed polypropylene plates each with(1) 2 in. center feed and(4) 1.5 in. corner returns. Automatic hydraulic closure with spring return. 32 mm cake thickness. PVC schedule 80 manifold. 100 PSI maximum feed pressure. Overall Dimensions 80 in. L x 40 in. W x 7 fg. H. This press is being offered as-is at the price below or reconditioned to include cleaning. New cloths, new gaskets(if necessary) hydraulics tested and a 30 day warranty. Price below is as-is, please inquire for reconditioning cost. F.O.B. CLEVELAND, OH
|
|
|
Sperry 470MM (18"), 3 cu ft, 20 Plate, HCP3 Hydraulic Filter Press, 100 PSI
Sperry 470MM(18" 3 cu ft. 20 Plate, HCP3 Hydraulic Filter Press, 100PSI FOB Boyers. PA. Sold As Is Where Is.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14396d5705f-0xfd-
|
|
|
stainless steel sanitary plate frame filter approx .5 cu ft homebrew wine beer
stainless steel sanitary plate and frame filter approx.5 cu ft J. Little Mercer Co. Inc. C-2466.5 cu ft PRESS. SS FILTER. Manufacturer(NO PLATE) Construction/configuration stainless. Inlets/outlets(3) 1" i/o. General data last used for juice. Motor 13 ss mesh plates. Not recessed. Mounted on cart. Pump not included in price. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted, Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time ... morethat does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping. this auction is for one filter press. several available.
|
|
|
5 Cu. Ft. Met-Chem Air over Hydraulic Style 24.5" X 25" X 2" Plate Filter Press
Met-Chem Air over Hydraulic Clamp Style 24.5" X 25" X 2" Filter Press THIS FILTER PRESS IS USED. BUT IN GOOD CONDITION. IT HAS 17 FILTERS, MEASURING 24.5" X 25" X 2" IT HAS FOUR 1.5" PORTS AND ONE 2" PORT. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS. EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: APPROX. PRODUCT DIMENSIONS: WIDTH: 30" LENGTH: 100" HEIGHT: 85" SHIPPING WEIGHT: 2500 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; ... moreWE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AU
|
|
|
90-100 cu/ft Trailer Mounted, High Pressure Filter Press Rental
We are listing our filter presses for rental purposes. Durco and JWI available! 90-100 cu/ft HIGH PRESSURE FEED- Up to 225 psi Material drops then conveys off rear of trailer. Rate is for a(1) month rental. We offer short. Mid and long term rental rates as well! Contact Tim Stapleton via email or phone Email: tstapleton@pressuretechinc.com 606-834-1545
|
|
|
Ebbco DI Resin vessel 1 Cu.Ft. (IN EXCELLENT CONDITION)
1 Cu.Ft. DI Resin vessel is designed to provide DI water for EDM applications. This system is constructed of Stainless Steel which is passivated for longer life. A distribution header off the inlet of the vessel is designed to evenly distribute the incoming water eliminating channeling and lengthening the life of the resin. A bottom grid in the vessel allows maximum contact time with the resin beads.
|
|
|
Met-Chem, Inc. 2 cubic foot Filter Press ext to 10 cu. ft.
We originally paid $18.000 Item is located in Zip Code 29440
|
|
|
Durco Filter Press, 15 cu ft, 800mm, non-gasketed
Enviro Solutions | | | 210 696 6300 Durco Brand Filter Press Durco Quadrapress Volume: 15 cubic feet Plates: 800mm NCGR Cake: 2 inches(50mm) FOB San Antonio. TX Price: $16.000.00 USD
|
|
|
JWI Filter Press, 8 cu ft, 630mm, gasketed
Enviro Solutions | | | 210 696 6300 JWI Filter Press. 8 cu ft, 630mm, gasketed Model: 630G32-13/27-418DA Max. Filtration Pressure: 100 PSI Max. Hyd. Closing Pressure: 4450 Plates: 28) 630mm CGR(caulked. Gasketed, recessed) 8 cubic feet of filtering area Price: $18.600.00 USD
|
|
|
JWI Filter Press (Lab sized 0.25 Cu Ft)
Up for sale is a good used JWI Lab sized filter press. Small diaphragm pump is included. As pictured. This item was taken out of service working in our PCB manufacturing shop. Filters are in fair shape, and can easily be changed to insure a clean start. Item can be skidded and loaded onto your paid shippers truck at no charge. This item is sold as-is. And we do not accept returns. If you would like to view this item prior to bidding or purchasing, please contact us. Thank you for inquiring.
|
|
|
Shriver Brand Fiter Press, 800mm non-gasketed, 20 cu ft, Model M800FB
Enviro Solutions | | | 210 696 6300 Shriber Brand Filter Press Model M800FB0 RENTAL: $4.500.00 usd per month See it at our website here: 800mm x 800mm x 32mm Plates Non-gaskted(NCGR) 37 Chambers 38 Plates. EMP brand 20 ft Capacity Semi-Automatic Plate Shifter Skid mounted sludge bin included Four Corner Closed Discharge. 18'L x 5'W x 7.5'H 7.700 lbs Located in San Antonio. Texas, USA, Zip: 78225 Sold'as is' Your inspection is invited. Shipping: Send your own truck to Zip 78225 OR We can provide a shipping quote that can be added to your total cost.
|
|
|
3 CU.FT. FILTER PRESS, GASKETED, 600 mm X 600 mm
4673- FILTER PRESS. RECESSED PLATE GASKETED, 600 MM X 600 MM, POLYPROPYLENE, CUBIC FEET: 3-3 CU.FT. FILTER PRESS-11 POLYPROPELENE GASKETED PLATES-EXPANDABLE BY APPROX. 5 PLATES-24.75' X 24.75' PLATES. 2.25' THICK-2.5' CENTER FEED-4 EYE. 1' AIR HYDRAULIC-8 SPARE FILTER CLOTHES INCLUDED-OVERALL DIMENSIONS: 3'2' W X 8'8' L X 6' H-2000 LBS All items are F.O.B. Location and are sold AS IS. We Ship Worldwide. Contact us today for a free shipping quote! All descriptions are a reflection of the item to the best of our knowledge and are subject to change. To buyers wishing to pay by credit card. A 3% processing fee will be added to the total amount of the final invoice. Please contact Christopher Barten at or call 1-800-465-3055 for more information.
|
|
|
Filter Press 3 CU FT Capacity WWE brand
Unit has new membrane cloths. And new box of cloth sets with installation tool. Size is 630mm with 3 CU FT capacity. Plates are in excellent shape as well as unit. Reason for selling unit is process line went to new system so no longer need press which was in operation the day it was pulled off line. Seller will help with shipping.
|
|
|
6 cu ft filter press 30" poly plates and frames with spickets __ NEW PRICE__
J. Little Mercer Co. Inc. Stock no. C-2489 30"PLATE& FRAME FILTER PRESS Approx. 6 cu. ft. cake capacity Manufacturer(NO PLATE) Dimensions 31" wide base x 123" x 81" tall including 29" base Construction/configuration poly plates horizontal PSI:Jkt:in 30" plates& frames. 15 chambers, 16 spicketed plates Inlets/outlets(3) corner in/out. Approx. 1.5" General data O/a 58" wide w/handles. 57" space for plates Drive Manual pump with power pak. Optional ram extension We will load on a flatbed(bestway to ship) Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted, Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business ... moreor residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping. this auction is for one filter press. several available.
|
|
|
Used Filter Press Duriron 24 cu ft 36" plate and frame press
Duriron used filter press 24 Cubic foot capacity(35) Total 36” non Gasketed plate and frame plate 3” cake thickness Automatic hydraulic closure Corner feed with 3 corner return Steel plumbing Last used on fruit juice Model EPF915-76 Overall Dimensions: 11’ L x 4’ W x 75” H All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications ... moreof these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispose of said goods. Or permit them to be in any way encumbered or taken by operation of law, and will not re
|
|
|
Used Filter Press, 22 cu. ft. exp. 28 cu. ft. 800MM press
Used Waste Water Treatment Filter Press 22 Cubic foot expandable to 28 cubic foot(44x56) 800mm Non gasketed polypropylene plates 32mm Cake thickness Center feed with 4 corner return Automatic hydraulics Includes diaphragm feed pump and sludge dump cart(If not needed consult with sales for discount) Overall Dimensions: 205” L x 40” W x 64” H All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing ... moreand accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispose of said goods. Or permit them to
|
|
|
Used Filter Press, Sperry 19 cu. ft. 36" plate and frame press
Sperry used filter press. 19 cubic foot capacity(35) Total 36” non Gasketed plate and frame plates 2” Cake thickness Automatic hydraulic closure Corner feed with 3 corner return Steel plumbing. Last used on fruit juice. Overall Dimensions: 11.5’ L x 5’ W x 63” H All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these ... moreterms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispose of said goods. Or permit them to be in any way encumbered or taken by operation of law, and will not remove said g
|
|
|
Used Filter Press, Aqua Care 15 cu. ft. 36" plate and frame press
Aqua Care used filter press 15 Cubic foot capacity(29) Total 36” non Gasketed plate and frame plates 2” Cake thickness Automatic hydraulic closure Corner feed with 3 corner return Steel plumbing Last used on fruit juice Model EPF915-76 Overall Dimensions: 11’ L x 4’ W x 75” H All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications ... moreof these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispose of said goods. Or permit them to be in any way encumbered or taken by operation of law, and will not
|
|
|
Filter Press Used, Seimens 75 cu. ft. 1200MM press
Seimens 75 cubic foot used waste water treatment filter press(41) 1200mm Gasketed polypropylene plates Copper stabilized plates 50mm Cake thickness Automatic hydraulic closure Center feed with 4 corner return Semi-automatic plate shifter Bombay doors Overall Dimensions: 233” L x 58” W x 70” H All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. ... moreNo modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispose of said goods. Or permit them to be in any way encumbered or taken by operation of
|
|
|
Used Filter Press Netzsch 7 cu. ft. 630MM Press
Netzsch 7 cu. ft. used filter press(25) 630mm non gasketed filter press plates 32mm Cake thickness Center feed with open side discharge return Model#630lp/24/36 Serial#400-1217 Overall Dimensions: 115” L x 45” W x 70” T Unit has optional catwalk and stairs. Please consult Water& Wastewater Equipment Co. sales for price adder for components both as is and fully reconditioned All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment ... moreCompany. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispo
|
|
|
Used Filter Press Parkson 7.5 cu. ft. exp. 10.5 cu. ft. 800MM press
Parkson 7.5cf x 10.5 cf used filter press(15) x(21) 800mm Gasketed polypropylene filter press plates 32mm Cake thickness Center feed with 4 corner return 1-3-1 button design for air blow down Automatic hydraulic closure. With semi automatic plate shifter Overall dimensions: 141” L x 41” W x 76” H All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment ... moreCompany. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispose of said goods. Or permit them to be in any way encumbered or taken by operatio
|
|
|
Filter Press Used. Filtration Solutions 3 cu ft 630MM press
Filtration Solutions 3 cubic foot used filter press(10) 630mm Gasketed polypropylene plates 32mm Cake thickness Automatic hydraulics 1-3-1 button design for air cake blow down Center feed 4 Corner return. With a sludge dump cart SN: 1075 Overall Dimensions: 93” L x 36” W x 69” H All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications ... moreof these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State taxes, federal taxes, labor taxes, import or embargo fees are to be paid by Buyer. 5. Waivers of any breach of this contract does not constitute waiver of other breaches of the contract. 6. The Purchaser agrees that until full payment is made he will not encumber or dispose of said goods. Or permit them to be in any way encumbered or taken by operation of law, and will
|
|
|
Used Filter Press 2 cu ft exp 3 cu ft 470mm press
Used filter press. 2 cu. ft. capacity expandable to 3 cu ft. 12x16) 470mm Poly pro gasketed plates 32mm Cake thickness Manual hydraulics Center feed with 4 corner return. Overall Dimensions: 86” L x 38” W x 52” H Price Reconditioned: $8.750.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ ... moreOr call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immed
|
|
|
Used Lab Filter Press 1.25 cu ft 12" plate and frame press
USED LAB filter press.1.25 cu. ft. 19) 12” Plate and Frames Manual screw closure Corner feed 3 Corner return Unit includes a drip tray Price Reconditioned: $5.900.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With ... morerespect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment and materials. 4. All local taxes. State t
|
|
|
Sperry Filter Press 160 cu. ft.
Sperry Filter Press 160 cu. ft. 1200mm Plate Size 160 Cubic Feet Center feed Four Corner Return Overall Dimensions: 40' Long x 5' Wide x 5' High Used in good working order Customer Responsible for Freight from Cleveland. Ohio 44102
|
|
|
Used Filter Press Durco 6.5 cu ft 630mm press
Durco. 6.5 cu. ft. used filter press(22) 630mm Non-gasketed polypro plates(1) 2’ center feed and(4) 1.5’ corner return Automatic pneumatic hydraulic closure and release 100 PSI max feed pressure 32 mm Cake thickness. Overall dimensions. Overall Dimensions 110’ L x 36’ W x 54’ H. Price Reconditioned with(22) non-gasketed plates: $13.900.00 Price Reconditioned with(22) gasketed plates: $19.000.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change ... moredue to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure
|
|
|
Used Filter Press Lanco 3.5 cu ft 470mm press
Lanco. 3.5 cu. used filter press 69 sq. ft. filter area(22) 470MM Gasketed polypro plates(1) 2" PVC feed and(4) 1" PVC corner returns Manual hydraulic closure 32 mm cake 100 PSI max feed pressure Overall dimensions: 10'L x 3'W x 4'H. Price Reconditioned: $10.000.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment ... moresee our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments
|
|
|
Used Filter Press JWI 25 cu ft 800mm press
JWI. 25 cubic foot used filter press(50) 800mm Gasketed polypro filter press plates Automatic hydraulics Center feed with 4 corner return Semi automatic plate shifter 1-3-1 button design for air blow down M# 800G32-50-25 233” L x 50” W x 64” H Price Reconditioned: $36.000.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our ... morewebsite http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments an
|
|
|
Used Filter Press Duriron 20 cu ft 900mm press
Duriron 20 cu. ft. used filter press(31) 900mm non gasketed filter press plates Center feed with 4 corner return Automatic hydraulics Overall Dimensions: 183” L x 58” W x 81” H Price Reconditioned: $29.000.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 ... moreand ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immediate possession of said equipment a
|
|
|
Used Filter Press Durco 14 cu ft 915mm press
Durco style. 14 cu. ft. used filter press(19) 36" 915mm) plates. 1-1/2" cake thickness Center feed. Non-gasketed, polypro plates Automatic hydraulic. Unit on risers. Overall dimensions: 16'L x 3'W x 9'T. Price Reconditioned with 19 non-gasketed plates: $20.900.00 Price Reconditioned with 19 gasketed plates: $27.400.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be ... moreconsidered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equip
|
|
|
30 CU. FT. JWI FILTER PRESS - 1000 MM - CGR - AUTOMATIC CLOSURE - PLATE SHIFTER
1- used 30 cu. ft. JWI Filter Press Model 1000G32-25/37-20/30 SYLS. Serial#4746. With(37) 1.000 mm caulked, 1-3-1 button, gasketed& recessed polypropylene plates with 32 mm cake thickness Approx. 3 1/2 in. dia. center feed and(4) approx. 2 1/4 in. dia. corner returns. Automatic hydraulic closure with pump control system and plate shifter. Rated for 100 psi maximum feed pressure and 3,100 psi maximum closing pressure. Approx. OAD: 17 ft. long x 5 ft. wide x 6 ft. tall. Press was only in service for approx. 1 year before being shut down. It has removed and is being stored at our New Jersey facility. F.O.B. LOCATION
|
|
|
3.5 cu ft FILTER PRESS 24 inch poly plate and frame STAR SYSTEMS
J. Little Mercer Co. Inc. Data for equipment C-2248 3.5 cu ft PRESS FILTER Model/serial no. 1197003. MODEL 30 24S/pp/4P/SH/HC Manufacturer STAR SYSTEMS Dimensions 24" x 24" x 1" plates Construction/configuration poly plates. SS frame PSI:Jkt:in SPEC# 30PP-22400-B4 Inlets/outlets(4) 1.5" triclamp i/o General data 14 frames. 15 plates Motor hand operated hydraulic ram. Enerpac p-80 10,000 psi max Drive 4 eyed. Max inside space 40" We will load on a flatbed(bestway to ship) 2 SIMILAR AVAILABLE* PRICE IS FOR ONE* Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted, Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We ... morecan ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping. this auction is for one filter press. several available.
|
|
|
Used Filter Press JWI 75 cu ft 1200mm press
JWI 75 cubic foot used waste water treatment filter press(41) 1200mm Non-Gasketed polypropylene plates Copper stabilized plates. 50mm cake thickness Automatic hydraulic closure. Center feed with 4 corner return Semi-automatic plate shifter Overall Dimensions: 233” L x 58” W x 70” H Price Reconditioned: $78.000.00 each Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more ... moreinformation on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company i
|
|
|
Used Filter Press Chemical Equipment Fabricators 1.5 cu ft 630mm press
1.5 cubic foot Chemical Equipment Fabricators used filter press(5) 630mm Gasketed polypropylene filter press plates Center feed. 4 corner return Manual hydraulic closure Overall dimensions: 52” L x 30” W x 75” H Price Reconditioned: $9.000.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ ... moreOr call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall be entitled to take immedi
|
|
|
Reconditioned Filter Press Perrin 24 cu ft 1000MM press
Fully Reconditioned Perrin automatic electric hydraulic. 24 cu. ft. used filter press(29) 1000mm non-gasketed polypro plates. High center feed, 4-corner return. Outermost dimensions: 48" W x 170" L x 63" T. Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call ... more440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed pa
|
|
|
Reconditioned filter press Star Systems 25 cu ft exp 33 cu ft 1000mm press
Star Systems. 25 cu. ft. Fully Reconditioned filter press expandable to 33 cu. ft. 518 square feet filter area(31) 1000MM non-gasketed polypropylene filter plates. 1) 3’ center feed with(2) 2’ corner returns Automatic hydraulic closure and return. Hydraulic distance piece for future expansion, semi-automatic plate shifter, 32MM cake thickness, 100 PSI maximum feed pressure Model No. RC30-10 OQ/PSEB Serial No. H96034. Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead ... moretime subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership
|
|
|
Reconditioned Filter Press Sperry 30 cu ft 930mm press
Sperry. 30 cu. ft. Fully Reconditioned filter press(30) 930mm non gasketed polypro plates. 32mm cake thickness, center feed with two corner return Overall Dimensions: 160” L x 51” W x 62” T Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. Please ... morenote listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part the
|
|
|
Reconditioned Filter Press 62 cu ft 1200mm press
62 Cu. Ft. Fully Reconditioned filter press(53) Non Gasketed 1200mm Poly Pro Plates. 32mm Cake Thickness, Automatic Closure, Center Feed with 4 Corner Return. Overall Dimensions: 22’ L x 5’ W x 6’ T Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for ... moreSam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any
|
|
|
Reconditioned Filter Press 65 cu ft 1200mm press
65 Cu. Ft. Fully Reconditioned filter press(56) Non Gasketed 1200mm Poly Pro Plates. 32mm Cake Thickness, Automatic Closure, Center Feed with 4 Corner Return. Overall Dimensions: 23’ L x 5’ W x 6’ T Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for ... moreSam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any
|
|
|
Reconditioned Filter Press EIMCO/Shriver 98 cu ft 1200mm press
EIMCO/Shriver. 98 cu. ft. Fully Reconditioned filter press 1200mm. 60 high volume, gasketed, polypro plates, 40mm cake thickness) Center feed. 4-corner return, automatic hydraulic closure, stainless steel center feed pipe. Approximate dimensions: 19' L x 72" W x 66" H. Available with leg risers to raise unit 37" Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! ... moreFor more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s
|
|
|
Reconditioned Filter Press JWI 35 cu ft 1000mm press
JWI fully reconditioned filter press 35 Cubic foot. 44) total 1000MM Gasketed recessed plates, automatic hydraulic closure, Center feed with 4 corner return, PVC plumbing Overall Dimensions: 15-1/2’ L x 51” W x 6’ H Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 ... moreand ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed
|
|
|
Used Filter Press. JWI 20 cu ft exp 35 cu ft 1000mm press
JWI used filter press 20 Cubic foot capacity expandable to 35 cubic foot(26) total 1000MM Gasketed recessed plates. Automatic hydraulic closure, Center feed with 4 corner return, PVC plumbing Overall Dimensions: 15-1/2’ L x 51” W x 6’ H Price Reconditioned: $34.900.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website ... morehttp:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and shall
|
|
|
Reconditioned Filter Press Shriver/Eimco, 12 cu ft filter press
Shriver/Eimco. 12 cu. ft. fully reconditioned filter press(39) non gasketed poly pro plates. 32mm cake thickness, automatic hydraulics, center feed with four corner return. Overall Dimensions: 14’ L x 34” W x 70” H Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 ... moreand ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos.
|
|
|
Reconditioned Filter Press Sperry 17 cu ft 900mm press
Sperry 17 cu. ft. fully reconditioned filter press(32) 900mm non gasketed poly pro plates. 32mm cake thickness, automatic hydraulics, center feed with side discharge. Overall Dimensions: 14’ L x 5’ W x 5” H Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ... moreask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments
|
|
|
Reconditioned Filter Press Duriron 4.5 cu ft 470mm press
Duriron 4.5 cu. ft. fully reconditioned filter press(26) 470mm Gasketed Poly Pro Plates. 32mm cake thickness, manual hydraulics, 1-3-1 button design, center feed, 4 corner return, mounted poly pro diaphragm pump Overall Dimensions: 110” L x 25” W x 58” H Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ ... moreOr call 440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the
|
|
|
Reconditioned Filter Press Durco 6.5 cu ft 630mm press
Durco. 6.5 cu. ft. fully reconditioned filter press(22) 630mm non-gasketed polypro plates. 1) 2’ center feed and(4) 1.5’ corner return, automatic pneumatic hydraulic closure and release, 100 PSI max feed pressure, 32 mm cake thickness Overall dimensions. Overall Dimensions 110’ L x 36’ W x 54’ H. Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or ... moreused equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until O
|
|
|
Reconditioned Filter Press Netzsch 7 cu ft 630mm press
Netzsch 7 cu. ft. fully reconditioned filter press(25) 630mm non gasketed filter press plates. 32mm cake thickness, center feed with open side discharge return. Model#630lp/24/36 Serial#400-1217 Overall Dimensions: 115” L x 45” W x 70” T Unit has optional catwalk and stairs. Please consult Sam for price adder for components both as is and fully reconditioned Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious ... moreoffers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Wa
|
|
|
Reconditioned Filter Press Durco 7 cu ft 630mm press
Durco. Automatic, 7 cu. ft. fully reconditioned filter press 630mm. 22 non-gasketed polypro plates Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference ... morebetween AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and
|
|
|
Reconditioned Filter Press Durco 11 cu ft 630mm press
Durco. 11 cu. ft. fully reconditioned filter press(40) 630mm non-gasketed polypro plates. 1) 2’ center feed and(4) 1.5’ corner discharge, automatic pneumatic hydraulic closure and release, 100 PSI max feed pressure, 32 mm cake thickness Overall Dimensions: 142’ L x 36’ W x 60’ H. Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see ... moreour website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made pay
|
|
|
Reconditioned Filter Press 4 cu ft 630mm press
Fully Reconditioned Water& Wastewater Equipment Compnay style filter press. 4 cubic foot(14) 630mm non Gasketed filter press plates. Automatic hydraulics, corner feed with 3 corner return Dimensions: 85” L x 42” W x 63” H Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call ... more440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make
|
|
|
Reconditioned Filter Press JWI style 5 cu ft 470mm press
JWI style. 5 cu. ft. fully reconditioned filter press(28) 470mm non gasketed filter press plates. Automatic hydraulics, center feed with 2 corner return. 2 spare plates will be included with this unit. Overall dimensions: 112” L x 37” W x 51” H Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ ... moreOr call 440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement
|
|
|
Reconditioned Filter Press Duriorn 20 cu ft 900mm press
Duriron 20 cu. ft. fully reconditioned filter press(31) 900mm Non gasketed filter press plates. Center feed with 4 corner return, automatic hydraulics Overall Dimensions: 183” L x 58” W x 81” H Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. ... morePlease note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part
|
|
|
Reconditioned Filter Press Shriver 46 cu ft 1200mm press
Shriver. 46 cu. ft. fully reconditioned filter press(41) 1200mm non-gasketed polypro plates. 32mm cake thickness, automatic hydraulics, center feed with 4 corner return. Model m-1200fb. Tag#1793, serial#41806-01-ar. Unit currently only has a head plate, brand new plates will be added with reconditioning. Overall Dimensions- 210"L x 56"W x 60"H Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious ... moreoffers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Was
|
|
|
Reconditioned Filter Press Durco 38 cu ft 1000mm press
Durco Model E29565. 38 cu. ft. fully reconditioned filter press(33) 1000mm non-gasketed polypropylene filter plates. 1) 3’ stainless steel center feed and(4) stainless steel 2’ corner returns, automatic hydraulic closure return with electric and pneumatic pumps, semi-automatic plate shifter, 32mm cake thickness, 100 PSI max feed pressure Overall Dimensions 184’ L x 80’ H x 57’ W. Price Reconditioned with(33) 1000mm gasketed polypropylene filter plates: $60.000.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty ... moreon all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contai
|
|
|
Reconditioned Filter Press Duriron 75 cu ft 1200mm press
Duriron. 75 cu. ft. fully reconditioned filter press(61) 1200mm Gasketed filter press plates. 32mm cake thickness, automatic hydraulics, semi-automatic overhead plate shifter, center feed with 4 corner return. Overall dimensions- 250” L x 56” w x 96” H Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ ... moreOr call 440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the a
|
|
|
Reconditioned Filter Press 2.5 cu ft 470mm press
Water& Wastewater Equipment Company Style. 2.5 Cubic foot fully reconditioned filter press(13) 470mm Gasketed polypropylene filter press plates. 32mm cake thickness, manual hydraulics, center feed and 4 corner return Overall dimensions: 57” L x 35” W x 49” H Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ ... moreOr call 440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms o
|
|
|
Reconditioned Filter Press JWI style 3.5 cu ft 470mm press
JWI Style Used Filter Press. 3.5 CF(19) 470mm Gasketed filter press plates. Center feed with 4 corner return, manual hydraulic closure Dimensions: 100” L x 61” W x 61” H Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. Please note listed pictures ... moreare NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wast
|
|
|
Reconditioned Filter Press JWI style 2.5 cu ft 470mm press
Fully Reconditioned JWI style Filter Press. 2.5 cubic foot(14) 470mm non gasketed filter press plates. Manual hydraulics, center feed with 4 corner return Overall Dimensions: 70” L x 30” W x 52” H Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for ... moreSam. Please note listed pictures are NOT the actual filter press! These pictures are to show the difference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any p
|
|
|
Reconditioned Filter Press Hoesch 7 cu ft 630mm press
Hoesch. Automatic, 7 cu. ft. fully reconditioned filter press 630mm. 22 non-gasketed polypro plates Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. Please note listed pictures are NOT the actual filter press! These pictures are to show the ... moredifference between AS IS and RECONDITIONED. Please call Sam for additional photos. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon failure to make agreed payments. Or any part thereof, Water and Wastewater Equipment Company is to retain any and all partial payments and
|
|
|
3 cu ft filter press (19) 470 mm poly plates 18 chambers _ waste water treatment
J. Little Mercer Co. Inc. Model/serial no. h150174 model ri2470QcQDpapc. 09/03 Manufacturer STAR SYSTEMS Dimensions 470 mm plates. 18 chambers Construction/configuration poly plates Inlets/outlets 2" center feed. 4) 1" outlets Drive(19) center feed. Gasket fabric membrane plates. Has sandpiper pump SIMILAR AVAILABLE* PRICE IS FOR ONE* Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted, Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction ... moreat any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping. this auction is for one filter press. several available.
|
|
|
PACIFIC FILTER PRESS 10 cu. ft.
Pacific Press Company. USED year 2000. 10cubic foot Filter Press with Sludge cart. SPECIFICATIONS. DIMENSIONS: 144" long. 34" wide, 55' high 2000 lbs shipping weight. MOTIVATION: Air operated hydraulics 3/8 Inch compressed air fitting with 100 psi. 20 scfm Minimum. PLATE SIZE: 630 mm x 35plates. STYLE: Gasketed 630 mm(24-7/8" x 24-7/8" POLYPROPYLENE PRESSURE: 100 psi feed pressure. 4800 psi hydraulic pressure. CLOTHS: Polyprpylene multi-filament fabric with rope caulking. FRAME: Steel. Polyurethane coating. INLET: 2 Inch NPTF OUTLET: 1 Inch Flange
|
|
 |