|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Los Angeles, United States Donaldson Torit, MODEL 75 1 HP DUST COLLECTOR 115/220V. USED WORKING CONDITION. SINGLE PHASE 115V WIRED.
Buy It Now
Condition: Used Location: Oxford, United States
Buy It Now
Condition: Used Location: Minneapolis, United States Make: Donaldson Torit. Model: WSO 10. Year: 2017. Nominal Airflow: 450 cfm (764 m/h). This unit includes both a round and square inlet and a pressure ... moregauge. Motor: 0.75 HP. Fitler Area (oil): 43 cu ft.
Buy It Now
Condition: Used Location: New Berlin, United States I can side load this on the 4x4 cribbing I set it up on or it could be slid into a dry van. The filter is 12' High 5' wide plus the lower duct connectors ... more3" each side and 26" thick. I have cardboard on the forks so the back of the filter isn't all scratched up.
Buy It Now
$15.46 Shipping Condition: New Location: Centuria, United States Donaldson Torit® Products Product Attributes. Filter Area (sq ft): 25.08. Temperature Limit (F): 275. Filter Area (sq m): 2.33. Temperature Limit (C): ... more135. Bottom Construction: Open.
Buy It Now
Condition: Used Location: Woodruff, United States MANUFACTURE: DONALDSON TORIT. PHASE: 3PH. MODEL: EDM COLLECTOR. VOLTS: 208V.
Buy It Now
Condition: Used Location: Cleveland, United States DonaldsonTorit Mist Collector Model MHP-1 460 Volt: 3 Phase 3 HP. Ft. Filtering Area. Currently no filters in unit. The Torit MHP-1 Mist Collector is ... moredesigned to collect, filter and reclaim mist generated from machines using oil-base, synthetic or water-soluble coolants.
Buy It Now
Condition: Used Location: Coffeyville, United States DONALDSON TORIT TDDB 3000. MODEL: TDDB 3000. DOWNDRAFT BENCH 460V, 3 PHASE. TYPE: DOWNDRAFT BENCH. TM/1445/WM/(1)AA.
Buy It Now
Condition: Used Location: Cedarburg, United States Contaminant: pharma dust. 3x Motors: 30 Hp, 230-440/460V, 3 ph, 60 Hz @ 3525 RPM. Total Combined Motor Hp: 90. Total Number of Filters: 36. SPEC'S SUBJECT ... moreTO FINAL INSPECTION. WE'LL DO OUR VERY BEST TO MAKE IT SO!
Buy It Now
$14.50 Shipping Condition: New Location: Harlan, United States This listing is for a 10 pack of Donaldson Torit dust collector filters. The model number is P199369-016-140. Filters measure 24" x 24" x 36" ... moreand include loops that fit various dust collectors. Made of 95% ASHRAE. Our business. Psmsolutions2, is a sister company of psmsolutions and pleasantstmachinery. Both accounts have been in use for years with excellent seller ratings. Please refer to those accounts for a more accurate representation of our dedicated commitment to customer satisfaction. We welcome any questions that you may have prior to bidding. Feel free to send us a message or contact Steve Nelson via phone at 815-758-6534 during normal business hours. We will respond to your phone calls as soon as possible. PLEASE READ THE FOLLOWING VERY CAREFULLY: Fees: An 8.5% State of Illinois sales tax is charged for all winning bidders that are Illinois residents except for those that have a state tax ID. A $35.00 palletizing fee is required for each pallet used on LTL truck shipments The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction. If 30 days have passed since the item was paid for. The item will be considered abandoned and the winning bidder is deemed to have forfeited all monies paid to the seller. The item will then be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Items Requiring Freight Shipment: All items are shipped F.O.B. from Dekalb. IL 60115. Many of our customers have used the following trucking/freight companies for their shipping needs: Small Business Transportation at 888-368-6022 x218. Contact: Gil
Buy It Now
Condition: Used Location: Woodruff, United States MANUFACTURE: DONALDSON. MODEL: EDM COLLECTOR.
Buy It Now
Condition: Used Location: Millersburg, United States 3Hp 3Ph Motor 230/460V Wired for 480V. Model Model 80 CAB. Lift Tables. This is the 84 type dust collector with the bigger motor. Our mission is to empower ... moreindustries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
Condition: Used Location: Middlebury, United States Unit only no extraction arms. Size: Length: 92 in. Width: 44 in. Height: 19 in. Prefer to pick it up yourself?. To get a freight quote we will need to ... moreknow the following Weight (lbs, oz): 597. BULLSEYE INDUSTRIAL SALES, LLC.
Buy It Now
Condition: Used Location: La Grange, United States
Buy It Now
Condition: Used Location: Apollo, United States Model #: 90 CAB.
Buy It Now
Condition: Used Location: Tijeras, United States Donaldson Torit Model 64 Dust Collector - 115V or 230V single phase (this one is wired for 115V), 3/4HP, has a 3" inlet. The foot pedal allows the user ... moreto 'shake' the filter as it fills, debris falls into the bottom tray for easy clean out.
Buy It Now
Condition: Used Location: Hiram, United States Donaldson / Torit Fume Extractor Torit Porta-Trunk PT-1000 Model: PT-1000 Serial No.: IG066706 Electrical Specs: 115/200V, 1.5hp, Single-Phase, 60Hz, ... more20amp Seller Note: Unit is USED with visible surface wear, some scratches, and rust, none affecting the functionality or the intended use of the unit. Unit has been run and tested by us as seen in the video. The “bell” on the end of the extractor tube is missing. What you see in the pictures is what is included in sale (Skidding/Palletizing/Crating IS NOT included with the sale, but can be purchased at an extra cost). There are no extra supplies included with the unit. Unit is being sold AS IS, WHERE IS, AS SHOWN. Pictures and video are of the actual unit being purchased. If the buyer has any questions, please feel free to ask.
Buy It Now
Condition: For parts or not working Location: Coffeyville, United States Liberty Machinery Company You are looking at: Used- Donaldson Torit Trunk 2000 Model T-2000 Fume Collector* Serial No. IG559388-001 New- 1999 LMC#35867 ... moreSPECIFICATIONS: Normal Airflow 890 CFM(1512 m3/h) Cartridge Filters(4) Ultra-Web FR Filters Approximate Sound Level 71 dB(A) Motor Power 5 HP. 3600 RPM Electrics 208-230/460V/ 3 Phase/ 60Hz Actual Dimensions 98"L X 50"W X 25"H without Trunk Actual Weight 790 Lbs. EQUIPPED WITH: Designed to Handle One or Two Arms Automatic Pulse Filter Cleaning System Ceiling-Mount Configuration*Preliminary Specifications Subject to Verification. Buyer is required to set up shipping All sales are"As-Is" F.O.B. Lincolnshire, IL. You are welcome to inspect any machine with arranged appointment. We will email additional photos as requested. Buyer is responsible for all freight and shipping costs. We are happy to assist in trucking and shipping arrangements. Please call(847) 276-2761 with any questions. Payment requirements If we do not receive payment for this item within 7 days of auction end. We reserve the right to relist the item without further notice. An automatic"Non-Payment Item Dispute" will be opened after 7 days. All purchased items must be picked up from our selling location within 21 days of"award of sale" Items remaining on our premises after 21 days will be subject to a warehousing charge of $25.00 per day. Hours of Operation Liberty Machinery Company's normal business hours are 8am- 4pm CST Monday thru Friday. Bids/Offer received during Off-Hours. Weekends, and/or Holidays will be reviewed the following business day. You may also check us out on our website at LibertyMachinery.com Also please check out our eBay store for other similar items. Click Pictures To Enlarge-
Buy It Now
Condition: New Location: Long Beach, United States
Buy It Now
Condition: Used Location: Coffeyville, United States DONALDSON TORIT. MODEL: DFO 2-2. DUST COLLECTOR. 200-1600 CFM. PATENT NUMBER: 6,387,162. FILTER PART NUMBER: P191920.
Buy It Now
Condition: Used Location: Sparta, United States New Donaldson Torit E-500 Centrifugal Mist Collector Serial# 1896484-009 Electric Requirement: 308-460/60/3 H.P. 1/3. Photo is stock. Actual item is boxed ... moreand ready to be shipped. Item was purchased via surplus auction, appears to be in excellent, brand new condition, and is covered by a thirty day returns policy(buyer pays return shipping) Please email us with any and all questions, we will try to answer them best we can. SKU: EQUIP110810001-PA10A-FS Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Condition: Used Location: Millersburg, United States 1 Hp motor 230/460V. This unit is wired for 460V. Foot pedal bag shaker. Lift Tables. Part Number 75. Our mission is to empower industries with the tools ... moreand solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
Condition: Used Location: Pico Rivera, United States Donaldson Torit Downflo Dust Collector. Model DF 2-4. Fan Motor 5 HP. SPECIFICATIONS SUBJECT TO VERIFICATION . We Buy Machinery.
Buy It Now
Condition: Used Location: Coffeyville, United States Approximate weight: 588lbs. KLS/#14836/SURPLUS/(1)EDONALDSON TORIT. MODEL 84 & MODEL 106. DUST COLLECTOR. Approximate weight:588 lbs.
Buy It Now
Condition: Used Location: Millersburg, United States Model MCU8. Pulse air cleaning of the filters. Lift Tables. 20" tall barrel. This has a clamp to lock the pail in place. This type is for steel dust and ... moresmall partials. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
Condition: Used Location: Cincinnati, United States Blower Motor, Horsepower/RPM 5 HP/3600 RPM. Clean Airflow 2000 CFM. Electrical System 208-230-460/3/60. Optional Unit Legs. Number Of Filters 2.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. 1,000s of industrial machine tools bought and sold every year. FILTER TYPE. . Performs as expected. May inspect under power. MOTOR, ... moreHORSEPOWER. 3.
Buy It Now
Condition: Used Location: Cincinnati, United States DONALDSON/TORIT DRYFLO DUST COLLECTOR - 28008. PRICE: F.O.B. Electrical System 115/1/60. Motor Speed 3450 RPM.
Buy It Now
$59.07 Shipping Condition: New – Open box Location: Fleetwood, United States Manufacturer: Donaldson Torit. Model: Specifically designed for use in Donaldson Torit systems. Product: Ultra-Web SB Nanofiber Filters. Key Features ... moreCash on Pickup. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY.
Buy It Now
Condition: New Location: Cleveland, United States
Buy It Now
Condition: Used Location: Middlebury, United States Model: Model 84. Prefer to pick it up yourself?. To get a freight quote we will need to know the following Warehouse Location: NA8101. Weight (lbs, oz): ... more390. BULLSEYE INDUSTRIAL SALES, LLC. LOCAL PICK-UP.
Buy It Now
$50.13 Shipping Condition: New – Open box Location: Millersburg, United States Part Number P124370. Model P124370. Donaldson Torit P124370 Dust Collector Air Filter 15" Long 14"dia Donaldson Torit. Lift Tables. Our mission is to ... moreempower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
Condition: Used Location: Rochester, United States Make: Donaldson Torit. Electric: 208-230/460V, 60 Hz, 3 Phase. Model: 90-5 CAB. Type: Dust Collector.
Buy It Now
Condition: Used Location: Cleveland, United States Used Torit dust collector, model VS1200, carbon steel construction, 135 sf ft filter area, up to 1243 cfm with blower, 200/230/460 volt with blower, serial# ... moreIG43815.
Buy It Now
Condition: Used Location: Coffeyville, United States MODEL: VS550. DONALDSON TORIT DIVISION. DUST COLLECTOR. OVERALL LENGTH: 28-3/4". APPROXIMATE WEIGHT: 460 LBS. WHAT YOU SEE IS WHAT YOU GET NOTHING MORE ... moreNOTHING LESS. SEE PICTURES . HEIGHT: 26-1/2".
Buy It Now
Condition: Used Location: Cincinnati, United States Nominal Airflow 3000 CFM. NOTE: This Dust Collector Is Out Of An Aerospace Facility And. Serial No 10031908-L1-1, Model VS3000. EQUIPPED WITH Electrical ... moreSystem 208/3/60. Blower Motor, Horsepower/RPM 7.5 HP/3450 RPM.
Buy It Now
Condition: Used Location: Le Roy, United States The main blower motor has been tested and is in working condition. Sold AS-IS . This item weighs ~3,000 lbs. (1,400 kg) and will need a forklift to lift ... morefrom warehouse loading dock to truck.
Buy It Now
Condition: Used Location: Millersburg, United States This unit is wired for 230V 3Ph. Motor is 230/460V. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic ... moreand ever-evolving marketplace. We are dedicated to understanding the unique challenges and opportunities that each industry faces.
Buy It Now
$179.00 Shipping Condition: Used Location: West Unity, United States Including your zip code. Send your phone number in case they need to call you. But we will help you. Give it about 6-8 hrs. We always leave refrigeration ... moreunits in the upright position. An example would be a natural gas fryer.
Buy It Now
Condition: Used Location: Dayton, United States Number of Dust Drawers. IF ITEM DOESN'T POWER ON WE STATE THAT FACT.IF WE SEE THAT AN ITEM IS BROKEN.WE STATE THAT FACT. Nominal Air Flow WE HAVE A HUGE ... moreINVENTORY COMING IN FROM A CLOSED GOV. OFFICE / LAB AND GARAGE.
Buy It Now
Condition: Used Location: Cincinnati, United States OUR WAREHOUSE. Overall Height 87". Electrical System 230-460/3/60. Motor Horsepower/RPM 7.5 HP/3450 RPM.
Buy It Now
Condition: Used Location: Cincinnati, United States PRICE: F.O.B. OUR WAREHOUSE.
Buy It Now
Condition: Used Location: Warminster, United States Specifications on this unit: Torit Donaldson Serial# IG062220 Complete with functioning Blower/Fan- Greencheck Model# 30-B1SW-21-9R-CCW-UB Serial# 96EI6699 ... moreMark EF. Motor- Teco Westinghouse 40 H.P. Frame 324T. 230/460 Volts, Amps 92.6/46.3, 3 Phase, RPM 1770, S.F. 1.15, Serial# BVP7101032001, 638lbs. Remote mounted timer- 120 VAC 50-60 HZ. Takes 24 filters. Has good Ultra Web filters included, with minimal use on them. Filter Dimensions- 13.84 DIA X 26.00 LG Actual Filter Area- 6096 SQ FT Magnehelic Differential Pressure Gauge by Dwyer Instruments Inc. Seismic Rating- zone 3 Wind Load Rating- 100 MPH NO. of Valves- 12 Compressed Air Required- 90-100 PSIG Air Consumption(10 SEC. PLS. INTVL. 12 SCFM Approx Housing Rating- + 20" H2O Standard Finish- Federal Blue Shipping Weight 3890 LBS Approx Estimated dimensions of unit- 116.21 L X 127.88 H X 95.00 W. Note: Top half does break down off stand for easier shipping and set up. Includes all original wiring diagrams. Prints and literature. Installed in 1996
Buy It Now
Condition: Used Location: Cincinnati, United States 84 DONALDSON/TORIT DRY FILTER TYPE DUST COLLECTOR. Serial No 177474, Model 84. Overall Height 78". Main Motor, Horsepower 3 HP.
Buy It Now
Condition: Used Location: Cincinnati, United States Electrical System 230-460/3/60. EQUIPPED WITH Motor Horsepower 5 HP/3450 RPM.
Buy It Now
Condition: Used Location: Cincinnati, United States Serial No 216941, Model 54. Quick Access Dust Drawers. Motor Horsepower 1/2 HP/3600 RPM. Inlet Size 3". Nominal Airflow 171 CFM 290 M3/H.
Buy It Now
Condition: Used Location: Cincinnati, United States Serial No 172672, Model 84. Cloth Filter.. 150 SQ FT. Main Motor, Horsepower.. 3 HP.
Buy It Now
Condition: Used Location: Stone Mountain, United States (3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. Cause of Action?). We also reserve ... morethe right to correct any stenographic errors. Machine Tool Dealer.
Buy It Now
$300.00 Shipping Condition: Used Location: Sparta, United States Used- Hoffman Blower Centrifugal Exhauster Model 74106A101. Serial#M118420. 100HP, pneumatic transfer unit with Pulse dust separator, S/N C-7238. AS IS ... moreWHERE IS. REMOVAL COST EXTRA. ref# 70726041 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
Buy It Now
$101.84 Shipping Condition: New – Open box Location: Archbold, United States Manufacturer: Donaldson Torit. Item Type: Filter. Filter Area 212.00 ft² (19.70 m²). Shape Round. Serial Numbers must be verified. We have over 10 years ... morecombined experience in Industrial Surplus. We love to hear from you.
Buy It Now
Condition: Used Location: Pedricktown, United States TORIT Model VS-3000 Vibra-Shake Dust Collector. Rated 1,800-3,300 CFM. 354 Sq.Ft. Has 7.5 HP motor, 208-460 volt. Price and availability are subject to ... morechange without notice. All machines are listed "as is".
Buy It Now
$39.90 Shipping Condition: New Location: Rochester, United States Donaldson Torit. ONE filter. Item specifications .
Buy It Now
Condition: Used Location: Millwood, United States Self-powered with a 3HP cast aluminum pressure blower (3450RPM). Process Air Outlet: Ø 6" (into an exhaust deflector). 34" X 36" bottom dust drawer, front ... moreslide-out.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. 1,000s of industrial machine tools bought and sold every year. Performs as expected. May inspect under power.
Buy It Now
Condition: Used Location: Cleveland, United States
Buy It Now
Condition: Used Location: Tickfaw, United States The Unimaster dust collector from Donaldson® Torit® is designed to maximize dust collection and the life of collector components for years of extended ... moreservice. In production for over 40 years, the Unimaster collector’s compact design and quiet operation is an industry success.
Buy It Now
Free Shipping Condition: New Location: Madison, United States 12.74" OD X 26.00" L.
Buy It Now
Condition: Used Location: Portland, United States Donaldson Torit mist collector, Inv 46956. Model WSO 25-1. Not What You Were Looking For?.
Buy It Now
Condition: Used Location: Portland, United States Donaldson Torit mist collector, Inv 46472. Model WSO 25-1. Not What You Were Looking For?.
Buy It Now
Condition: Used Location: Portland, United States Donaldson Torit mist collector, Inv 46473. Model WSO 25-1. Not What You Were Looking For?.
|
|
|
|
“USED” Donaldson Torit Model 80 Cabinet Dust Collector/Filter
USED” Donaldson Torit Model 80 Cabinet Dust Collector/Filter Serial# 2243210 Cabinet Model 80 Filter 5692301 208 Volt 3/ph 60hZ This machine is in excellent condition and was removed from a corporate shop environment. It was de-installed fully operational at the first of February 2013. This machine is being sold"AS IS WHERE IS" just like every other item I have ever sold on eBay. Note my 100% feedback. I will load this equipment on your truck for NO charge. This equipment may be inspected in my warehouse in San Jose. Ca by appointment. Feel free to call or email with questions and I will attempt to find the answer. Contact: Jeff Bowden 408-594-3308
|
|
|
Donaldson Torit Dust Collector Model VS1200 20196
in titles& description Name: Donaldson Torit Dust Collector Model VS1200, Ticket# 20196, Manufacturer: DONALDSON TORIT, Item located at: Owings Mills. MD, Serial# IG692941, Condition: Used, Terms& Condition: As is where i, Selling Price: $2500.00 Description: Donaldson Torit Dust Collector System. Model VS1200, S/N IG692941(Located on Dock) | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
Donaldson Torit Dust Collector Model WSO-25-2 (Inv.26045)
Donaldson Torit Dust Collector Model WSO-25-2 S/N 2624241 208/460 volts Filter PO31596/PO31775 no filters included Motor HP 7.5 61 in. x 29 in. x 118 in. H(rough est. Inv.26045) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: a handling/loading charge of $50; and the actual shipping cost(to be determined based on your location) Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our ... moreZip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
|
|
|
TORIT / DONALDSON DUST COLLECTOR model 84 3 HP 230 / 460 Volts 3 phase USA
Good Used Dust Collector Torit/ Donaldson Minnesota. USA Model 84 60 Cycle 3450 RPM 3 HP 230/460 VOLTS 3 Phase if shipping there will be a $50 charge to pallet. Band and shrink wrap as needed for a shipping quote call Jack Becker at 1-800-323-5441 ext 1951 or JBECKER at freightquote. com. tell him approx. 460 lbs on a pallet 4' x 4' x 5' high from R and T Tooling or pickup in Milroy Indiana zipcode 46156 and i will load for free Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Torit "Dry-Flo" Mist Collector, Model- DMC-B. Donaldson Torit Dry Flo 800CFM
Specification Description Manufacture, Torit-Donaldson, Model, DMC-B, Serial# IG482350, Inlet Diameter, 6" CFM, 800 CFM, Motor, 1.5 HP, Motor RPM, 3.450 RPM, Electrics, 230/460V by 3 Phase, Approximate Dimensions, 30" x 30" x 80" H, Approximate Weight, 650 Lbs. NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. Need help with Questions on shipping or assistance with this machines specifications? Feel Free to call us direct at 847-338-7139… ask for Erik J. Myers.
|
|
|
Donaldson Torit Dust Collectors, Model- 84. Torit dust collector
Specification Description Manufacture, Donaldson Torit, Model, 84, Serial# 179629-2, Electrics, 208/230/460V, Phase, 3 Phase, RPM, 3.600 RPM, Approximate Dimensions, 30" x 35" x 65"H, Approximate Weight, 500 Lbs. NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. Need help with Questions on shipping or assistance with this machines specifications? Feel Free to call us direct at 847-338-7139… ask for Erik J. Myers.
|
|
|
DONALDSON TORIT MODEL 90 CABINET DUST COLLECTOR
DONALDSON TORIT MODEL 90 CABINET DUST COLLECTOR Efficient. Compact design handles a wide range of dust applications from 1200 to 2000 cfm. High collection efficiency of 99.9%+ by weight allows recirculation of heated or air-conditioned plant air. Quick access to dust drawers and dust pails provides easy and safe maintenance. Manually-operated filter shaker makes filter cleaning easy. Four filter media and three construction choices provide a variety of options to customize the unit for your specific application. Inlet locations on top and three sides create installation flexibility. All 60 Hz motors are compliant with the Energy Independence and Security Act of 2007(ESIA) Grinding, Buffing and polishing, Machining, Metalworking, Packaging, Abrasive blasting, Dental labs, Textiles, SHIPPING DIMENSIONS(INCLUDES PALLET WRAPPING AND LOADING) ... more48 X 40 X 79 654 LBS for more information visit: and 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f5ef18c07-0x103-
|
|
|
DONALDSON TORIT MODEL 81 BAG TYPE DUST COLLECTOR
DONALDSON TORIT MODEL 81 BAG TYPE DUST COLLECTOR Click Images to Enlarge IMG_1409 IMG_1410 IMG_1411 IMG_1393 DONALDSON TORIT BAG TYPE DUST COLLECTOR MODEL 81 SERIAL NO: 256010-2 VOLTAGE: 200/ 230/460 1.5 HP RPM: 3600 PORT DIAMETER: 4" COMES AS SHOWN IN PHOTOS WEIGHT: 325 LBS LOADING FEE: $20 WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING andale andalesell. Payment Options: PayPal Shipping Options: Freight(See item description for Shipping Charges) I will ship to: USA and Internationally[Sales Tax] 9.75% for in-state buyers Payment Policy: PayPal: Yes we do accept paypal payments for all items being shipped out. IF you are picking up the item or having a friend pick up the item it must be paid in ... moreperson at time of pick up. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. Other: PLEASE CALL FOR OTHER PAYMENT TYPES Seller is to receive payment within 5 days of end of auction. High bidder must pick up or schedule loading out within 7 days of auction end. Storage fees will apply after 2 weeks. Our business hours are Monday thru Friday 8:00 AM to 3:30 PM PST. Our address is 14911 Don Julian RD. Industry.CA 91746. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. NOTE: We reserve the right to reenlist any item. Immediately if buyer cannot adhere to the conditions and time frame previously mentioned. For additional inquiries email 1MachinerySales.com ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located
|
|
|
DONALDSON TORIT DUST COLLECTOR Model 64
Donaldson-Torit Ltd. Dust Collector. Mobile unit. Model 64. Runds on 220-380-415V 60 cy, 3 phase. 3420 RPM 3/4 hp. Nice and clean. Link to pdf from manufacture with additional specs: We'll skid for free. And can arrange shipping on your behalf. Be sure to add me to your! Check out my! WE ARE U.S. CUSTOMS BONDED. PLEASE INQUIRE ABOUT A DOOR TO DOOR FREIGHT RATE. INCLUDING BORDER SERVICES TO YOUR LOCATION. CANADIAN BIDDERS PLEASE NOTE THAT ALL APPLICABLE SALES TAXES ARE EXTRA! Nationwide: 5% GST. Quebec Bidders: 8.5% sales tax, HST Where applicable. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f8a57220e-0xfd-
|
|
|
Torit Donaldson Dust Collector, Model 80 CAB
For Sale: Torit Donaldson Dust Collector. Model 80 CAB Condition: Used- Sold As Is Other Feature: Manually-operated filter shaker makes filter cleaning easy. Quick access to dust drawers and dust pails provides easy and safe maintenance Filter changes have never been easier with the EZ Filter Pack™. A one-piece, lightweight filter bag that installs without tools and provides a positive pressure seal. Weight: 200 lbs. Dimensions: 83"T x 33"WL x 29 1/2"69"D There is no warranty with this item. And no refunds. Shipping/ Freight: Location- Fort Worth. Tx 76119 Price does not include shipping/freight charges Buyer responsible for all shipping charges. We will strap to pallet for shipping.
|
|
|
TORIT DONALDSON MODEL 84 FILTER CARTRIDGE DUST COLLECTOR-1200 CFM
One used Torit model 84 dust collector. Runs fine. Filters are dirty. Need cleaning or replacement. Click on the model link for Owners manual. Two available. Price is for one unit. Manufacturer: Torit Donaldson· Model: 84· RPMs: 3600· Capacity: 1200 CFM· Inlet Connections: 6” Motor: 3hp· Dimensions: 28” x 28” x 48” Voltage: 208-460/ 3 phase· Weight: 350 Lbs. approximate) Price is F.O.B. Anderson. SC Buyer pays all shipping costs. Can help arrange shipping. This item is for sale locally and is subject to prior sale. Item is sold“As-is where is” All information provided is deemed accurate. However i tem is sold“As-is. Where is” Photos are of actual item. Personal inspection is welcomed and encouraged. For more information or additional photos. Contact Don at 864.933.4352 don@gorillacontracting.com PayPal is accepted ... morewith 3% surcharge added to total. Visa/ MasterCard accepted with 3.5% surcharge added to total. Wire Transfer or Electronic Check is accepted for immediate release. Certified. Bank, Personal and Business Checks must clear before item is released. Call Send SMS Add to Skype You'll need Skype CreditFree via Skype
|
|
|
Donaldson Torit Fume Collector Model T-2000
Donaldson torit fume Collector A SELF CONTAINED SOURCE COLLECTOR DESIGNED TO CAPTURE FUME GENERATED FROM MODERATE TO HEAVY WELDING APPLICATIONS. Dust Collector Information Lot Number Dust-2141 Manufacturer Donaldson Torit Model T-2000 Serial IG083907-2 Sound Level 71(dBA) Air Flow 890(cfm) Number of Filters 4(Ultra Web FR) Filter Area 636 sq ft Number of Valves 2(3/4” Motor 5 hp Motor Speed 3600 rpm Housing Construction 16 Gauge Electric requirements 208-230/460/ 3ph/ 60Hz Dimensions Length 98” x Width 50” x Height 20” Weight 500 lb Last used Tool company Condition USED. IN WORKING CONDITION Location Miami. FL USA Unit is removed and ready to ship. $100 charge for Crate(Outside of Shipping& Handling Cost) REFUND We will refund any item returned within 14 days of our shipment. Provided it is returned in the same condition it was shipped. ... moreBuyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. PAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage on day all, 30-day max. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. Skidding fees range from a minimum of $50.00 +. Freight shipments must be thoroughly inspected prior to accepting delivery. We are not responsible for any damages or shortages once a freight shipment has been signed for. Any damages or missing item
|
|
|
DONALDSON TORIT MODEL TD-3-54
This Torit was removed from a working environment and has been powered on and is in great working condition. The small drawer behind the removable panel/door does have some broken welds as shown but could easily be repaired. This Torit will ship as shown on a pallet and will include a 14 day warranty against failure. DUE TO THE SIZE AND WEIGHT O F THIS ITEM. IT WILL BE SHIPPED ON A PAL LET VIA FEDEX FRIGHT. A $ 1 5.00 PALLET/HANDLING FEE WILL BE ADDED TO THE TOTAL SHIPPING FEE. FOR A SHIPPING QUOTE PLEASE MESSAGE ME ALL THE FOLLOWING INFORMA TION: COMPLETE MAILING ADDRESS IF THIS IS GOING TO A BUSINESS OR RESIDENCE IF YOU NEED A LIFT GATE- TRUCK. OR IF YOU HAVE A LOADING DOCK w/FORKLIFT LOCAL PICK UP IS ALSO AVAILABLE Weights and Measurements on palette 40"W X 40"L X 64"H 500 lb s. Your purchase will be professionally packed ... moreby our shipping department and shipped via UPS or FedEx. Please email with any questions and review auction terms below prior to bidding. ST F1-RJ Good luck and thanks for looking! Auction Terms: Please note: All returns are subject to a 15% restock fee. Shipping Policy: We only ship to the United States. We ship through either UPS or FedEx. Combined shipping discounts are available. These items must be paid for within the same transaction. Email your seller. Before payment, to verify combined shipping costs. Customer Pickup: Purchases can be picked up between the hours of 8:00am to 3:30pm CST Monday through Friday. Buyers must email in advance to plan a pick up time and date. Payments: Payments are due within 10 days of auction close. We prefer Paypal. We do not accept checks. And are not responsible for late or missing payments. Office Hours: Our office hours are 7:30am to 4:00pm Monday through Friday. We are not available for email outside business hours. Or over major holidays. Warranty Information: Warranties. If available, are listed per item. If you do not agree with these terms, do not place a bid. All of our items fall under three categories described below. Guaranteed
|
|
|
DONALDSON TORIT CYCLONE DUST COLLECTOR Model 30 w/ Optional 8-bag Filter NR
Normal 0 false false false EN-US X-NONE X-NONE DONALDSON TORIT DUST COLLECTOR NO RESERVE! Up for auction is a DONALDSON TORIT Cyclone Dust Collector. This is a Model 30 and includes the Optional 8-bag Filter Assembly. The cyclone removes the majority of the particles and drops them into a 55 gallon drum(not included) The eight-bag filter removes any remaining dust from the return air(it's hard to see all eight bags in the photo- four are directly behind the front four) Includes electrical control box. The dust collector was installed inside at Lucent Technologies to remove dust from their baler room until they closed the Columbus. OH location. It is guaranteed to be fully operational and has been palletized for shipping. Original inventory cost showed to be $30.652! Here is a link for complete specifications: This is also advertised locally. ... moreSo the auction may end early if it sells. For questions. Please call John at(817) 846-2824. Please contact us for shipping estimates! Payment is due within 3 days of auction end. Payment can be made by credit card or cash in person. Email us for other payment options. We prefer not to accept Paypal for this item. Due to the fees. GOOD LUCK BIDDING!
|
|
|
Donaldson Torit Dust Collector Filter - Model 84 - 1200 CFM - FREE SHIPPING
Donaldson Torit Dust Collector. Model 84. 1200 CFM. Used Donaldson dust collector/ filter with manual. Machine is clean and in good working condition. My price of $999 includes Free Shipping to your door. I can be reached by phone at 417-299-2476 with any questions you have about this item. Description Manufacturer, Donaldson Torit, Model, 84, Serial# 238927, Electrics, 208/230/460V, Phase, 3 Phase, RPM, 3.600 RPM, Approximate Dimensions, 30" x 35" x 65"H, Approximate Weight, 400 Lbs. I realize it can be hard to buy things on the internet from someone you do not know. I do my best to be honest and describe my items fairly and accurately. I have a 100% feedback rating and I strive to keep it that way. When dealing with me you will be treated fairly and I will do my best to make sure you are happy with your purchase. My reputation ... moreand my customer’s satisfaction is very important. If you ever have a question about an item please feel free to call me at 417-299-2476. This is my cell phone number and I can be reached at that number anytime Payment for the item must be received within 5 business days of the auctions end. Item will not ship until the payment is received. All items are available for local pick up if the buyer prefers. There will be no charge for this. I have described this item to the best of my ability. I have done my best to be accurate and honest. All pictures are of the actual item you will be receiving. If you are unhappy with an item you must contact me within 48 hours of receiving the item. Items are shipped as described. I use only professional reliable shipping companies. But very rarely accidents occur. If your item is damaged in shipping it is up to the buyer to note the damage at the time of delivery. Damage should be noted on the bill of lading and signed by the customer and the delivery driver. It is then the buyer’s responsibility to file a claim with the shipping company. I will be happy to assist the buyer with the claim in any way that I can. I keep pictures of all items
|
|
|
Donaldson Torit Model 64 Dust Collector 3/4 HP 500 Cfm 208-230-460V 3 Ph. Used
Donaldson Torit Model 64 Dust Collector 3/4 HP 500 Cfm 208-230-460V 3 Ph. Used Make: Donaldson Torit Model: 64 S/N: IG-12718 HP: 3/4 Hp Motor; TEFC Cfm: 500 Input Voltage: 208-230-460 Volts. 3 Phase, 60 Hz. Presently Wired for 460 Volts. Inlet Size: 4" Round Condition: Used. Excellent. Just Taken Out Of Service: 10-05-13 Dimensions: Over All Width with Elect. Boxes: 29" x 28-1/2" Deep x 43" High. NOTE: Unit comes with a 30 Amp. Sq. D Fused Disconnect& Sq. D. Start-Stop Safety Button as shown. Selling FOB Buffalo. NY, We will palletize and load any truck free of charge, Local P/U upon request. Any questions; Call Tim on 716-876-9600 For more information. Concerning this item you may contact Timothy by e-mailing or calling 716-876-9600 if you are within the USA. No calls from out of the country please. But email us with ... moreany questions. TERMS& CONDITIONS PAYMENT- Full payment by buyer is to be made in 4 days from purchase. No items will be shipped until payment clears. An additional applicable N.Y. 8.75% sales taxes may apply depending upon delivery/location. All prices are in U.S. funds. SHIPPING& HANDLING- F.O.B. Buffalo. NY(14212) Buyer is responsible for setting up the shipping with preferred carrier. We cannot accept Freight Quote bill-of-laden per company terms. We can quote freight charges with proper COMPLETE ship to address and telephone number. We will supply any trucking company with our properly filled out bill-of-laden. Removal of item must take place in 10 days after payment is received, otherwise additional storage charges will apply. All shipping liabilities revert to the carrier once product is shipped. We will palletize and load on any truck free of charge. Local pickup is available with an appointment. RETURN POLICY- All items sold have a no return policy. MACHINE USE- Buyer acknowledges that the goods covered by this quotation or invoice are used goods which were neither designed nor manufactured by seller. As seller does not know of the specific application of the
|
|
|
DONALDSON TORIT CYCLONE DUST COLLECTOR Model 24
Up for auction is a DONALDSON TORIT Cyclone Dust Collector. This is a Model 24 and includes the Filter Assembly. The cyclone removes the majority of particles and drops them into a 55 gallon drum(not included) The filter removes any remaining dust from the return air. Will ship via freight at buyers expense. Or can be picked up in the Baltimore area. Here is a link for complete specifications:
|
|
|
Donaldson Torit Model # DFO 3-6 Downflo Oval Dust Collector
Donaldson Torit Model# DFO 3-6 Downflo Oval Dust Collector Installation& Operation Manuals Included This Downflo Oval is a continuous-duty dust collector with oval. Cartridge-style filters. The downward airflow design delivers high filtration efficiency, up to 25 percent more than other same-sized cartridge collectors. Filters are pulse-cleaned in sequence, one set at a time, without turning the unit off. The Model DFO 3-6 is two filters wide by three filters high by one filter deep. Dimensions: 60"x 66" x 73"H Typical applications: Abrasive blasting Sand handling Grinding Powder Paint Applications Welding Sawdust We purchased this unit new in 2008 for our carpentry shop. Shop is being remodeled, making this unit for sale. It is in excellent working condition! Great source for information about this unit can be found on ... morethe Donaldson Torit website We accept Paypal and cashier's check for this item By bidding on this item you agree to complete the transaction within 14 days Item will be made available to the winning bidder after we receive funds. Bidder will be contacted via email soon after auction ends with payment instructions. You May Control Shipping Cost and Schedule Delivery The wining bidder/buyer can sellect their own freight carrier. Arrange and pay for shipping and handling charges. The following basic rules apply. Must give us notification one business day before pick-up and pick-up be arranged during our platform business hours(8:00 am to 4:15 pm) FOB is the seller's dock(Buyer takes responsibility for item once it leaves seller's dock. Many freight companies require items be crated for shipment. Please see" You Can Have Your Item Crated for Shipment" heading below. You May Get Help Most shipping and freight companies are happy to assist you with an estimate and are ready to step you through the process. Quotes are available from the following websites: freightquote.com. Uship.com, yellowfreight.com, gitrucking.com(You may choose another company) A freight calc
|
|
|
Dust Collector, Donaldson Torit Model 84, Brand NEW FILTERS, 3-Phase
This is a really nice Donaldson Torit Dust Collector we purchased for our business and rebuilt-repainted intending to install it in our business but found we really did not do enough woodwork(vs metalwork) so we never installed it. We invested $750 in just the NEW FILTERS alone for this unit. The NEW filters have already been installed but have never been used. Local Pickup only. This is in Goleta. CA(10 min north of Santa Barbara) Power requirement is 230V OR 460V(voltage manually switched at the motor) 3 Phase. Motor is 3HP.
|
|
|
Donaldson Torit Model TD652 TD Series Dust Collector w/ Hepa Filter 3HP
DESCRIPTION Donaldson Torit TD Series Dust Collector Model: TD652 Product Condition: USED- Great working condition. Unit was used as a secondary dust collection system for a sand blasting cabinet. Specifications: up to 1300 cfm 3 hp Ulta Hepa Filter system Hopper Discharge: 5 Gallon pale pack Overall height: 120" Visit link below for additional manufacture specs: http:www2.donaldson.com/torit/en-us/pages/products/tddustcollectors.aspx- Local Pickups Local pickup is available for all items Monday thru Friday 8:30am- 4:30pm Domestic Shipments Domestic shipments are sent via UPS or USPS Priority Service. We choose the fastest most economic shipping method based on a items size. Weight, and value ratio. Items sent to Alaska& Hawaii are subject to additional charges. International Shipments We ship to all international countries. International ... moreshipments are sent USPS International Priority unless otherwise requested. Contact us for international shipping quotes. Freight Shipments Items requiring freight will be securely strapped to a pallet and loaded at no additional charge. Carriers assess an extra charge if delivery is made to residential area and/or if the service of a lift gate are required. Rigging charges may apply to items requiring special loading/shipping requirements. Your satisfaction is our highest priority! To the best of our knowledge the item is in perfect working condition. We do our very best to describe items as accurately as possible and in no way would misrepresent or knowingly sell an item that was not working. But since this item is used and at times. We do not know the history of an item, all items are sold"AS-IS" No refunds, returns, or exchanges will be given. Please contact us with any and all questions as your satisfaction is our highest priority. Ballard International is a leading asset solutions company. We specialize in providing services that solve the needs for the industrial. Scientific and financial industries. From capital equipment to c
|
|
|
DONALDSON TORIT MODEL VS1200 DUST COLLECTOR 3 HP 460 VOLT WITH MOTOR STARTER
DONALDSON TORIT MODEL VS1200 DUST COLLECTOR MOTOR: 3 HP 460 VOLT WITH MANUAL MOTOR STARTER FILTER PART# 2474000 DIMENSIONS: 24" W X 29" W X 63" TALL SERIAL# 2285131 SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS BLUE AISLE ROW-2 VINCE
|
|
|
Donaldson Torit Trunk 2000 Model T-2000 Fume Collector
Liberty Machinery Company You are looking at: Used- Donaldson Torit Trunk 2000 Model T-2000 Fume Collector* Serial No. IG559388-001 New- 1999 LMC#35867 SPECIFICATIONS: Normal Airflow 890 CFM(1512 m3/h) Cartridge Filters(4) Ultra-Web FR Filters Approximate Sound Level 71 dB(A) Motor Power 5 HP. 3600 RPM Electrics 208-230/460V/ 3 Phase/ 60Hz Actual Dimensions 98"L X 50"W X 25"H without Trunk Actual Weight 790 Lbs. EQUIPPED WITH: Designed to Handle One or Two Arms Automatic Pulse Filter Cleaning System Ceiling-Mount Configuration*Preliminary Specifications Subject to Verification. Buyer is required to set up shipping All sales are"As-Is" F.O.B. Lincolnshire, IL. You are welcome to inspect any machine with arranged appointment. We will email additional photos as requested. Buyer is responsible for all freight and shipping ... morecosts. We are happy to assist in trucking and shipping arrangements. Please call(847) 276-2761 with any questions. Payment requirements If we do not receive payment for this item within 7 days of auction end. We reserve the right to relist the item without further notice. An automatic"Non-Payment Item Dispute" will be opened after 7 days. All purchased items must be picked up from our selling location within 21 days of"award of sale" Items remaining on our premises after 21 days will be subject to a warehousing charge of $25.00 per day. Hours of Operation Liberty Machinery Company's normal business hours are 8am- 4pm CST Monday thru Friday. Bids/Offer received during Off-Hours. Weekends, and/or Holidays will be reviewed the following business day. You may also check us out on our website at LibertyMachinery.com Also please check out our eBay store for other similar items. Click Pictures To Enlarge-
|
|
|
Donaldson Torit, Centrifugal Mist Collector, Model E-200
Donaldson Torit Centrifugal Mist Collector. Model E-200 Features: 0.5 HP. 208/230/460V Three Phase 200 to 400 CFM 4" Inlet Drain Plug Filters(NEW. Shipped directly from Donaldson Torit) Installation Manual Parts Manual Good Condition. Motor Starter is Not Included. Freight to your facilty included in price.
|
|
|
Aercology / Donaldson Torit, Centrifugal Mist Collector, Model E-100
Donaldson Torit/ Aercology. Model E-100 Centrifugal Mist Collector Features: 0.5 HP. 208/230/460V Three Phase 100 to 250 CFM 4" Inlet Drain Plug Filters(NEW. Shipped directly from Donaldson Torit) Installation Manual Parts Manual Satisfactory Condition. Motor Starter is Not Included. Freight to your facilty included in price. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-146cb66adcc-0x114-
|
|
|
Donaldson Torit DMC Dryflo Dust Collector w/HEPA Filter 2,000 CFM - Model DMC-D1
DESCRIPTION Donaldson Torit Dryflo Dust Collector w/ HEPA Filter Model# DMC-D1 Product Condition: USED- Good working condition. The 4 legs are included but not pictured. External HEPA filters will need to be replaced. Specifications: Airflow(cfm) 2.000# of Filters: 1 Filter Area: 220 Ft^3 Motor: 7.5HP Voltage: 220/480 3 phase Est weight: 700lbs HEPA Filter option is a premium add on feature. For specifications please click the link below. Local Pickups Local pickup is available for all items Monday thru Friday 8:30am- 4:30pm Domestic Shipments Domestic shipments are sent via UPS or USPS Priority Service. We choose the fastest most economic shipping method based on a items size. Weight, and value ratio. Items sent to Alaska& Hawaii are subject to additional charges. International Shipments We ship to all international countries. International ... moreshipments are sent USPS International Priority unless otherwise requested. Contact us for international shipping quotes. Freight Shipments Items requiring freight will be securely strapped to a pallet and loaded at no additional charge. Carriers assess an extra charge if delivery is made to residential area and/or if the service of a lift gate are required. Rigging charges may apply to items requiring special loading/shipping requirements. Your satisfaction is our highest priority! To the best of our knowledge the item is in perfect working condition. We do our very best to describe items as accurately as possible and in no way would misrepresent or knowingly sell an item that was not working. But since this item is used and at times. We do not know the history of an item, all items are sold"AS-IS" No refunds, returns, or exchanges will be given. Please contact us with any and all questions as your satisfaction is our highest priority.
|
|
|
Donaldson Torit Porta-Trunk Model PT-1000 Fume Collector Shipping Freight
Donaldson Torit Porta-Trunk Model PT-1000 Fume Collector Used- Donaldson Torit Porta-Trunk Model PT-1000 Fume Collector* Serial No. IG468358-2 SPECIFICATIONS: Normal Airflow 780 CFM(1325 m3/h) Cartridge Filters(1) Ultra-Web FR Filter Approximate Sound Level 75 dB(A) Motor Power 1.5 HP. 3450 RPM Electrics 115/230/280 v/ Single Phase/ 60Hz Actual Dimensions 28"L X 40"W X 55"H without Trunk Actual Weight 350 Lbs. Unit was refurbished 1 year ago and is in excellent working condition with no issues. EQUIPPED WITH: Extraction Arm extends to 8' Static(Non- Pulse) Filter System Retractable Arm On/Off switch Operation Buyer is required to set up shipping Free pick up is welcome. Shipping is from Willis Mi. 48191. Shipping on a pallet will be Approximately 375 lbs. Buyer is responsible for setting up shipping with shipper of your ... morechoice and pay all shipping costs. I will strap to pallet and fork lift onto truck at no addition charge. I am told that shipping charges would be around $200. Please call(734) 672-0622 with any questions.
|
|
|
5,000 CFM Torit / Donaldson Model 2DF4 Downflow Dust Collector
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec# 3454(1) Used Downflow Torit/Donaldson Model 2DF4 Dust Collector; S/N 231803 Specifications: Capacity.5.000 cfm Number of Cartridges.4. Media Area.904 sq. ft. Motor Output.10 HP Motor Speed.3600 RPM Electrical Characteristics.230/460 VAC/ 3 Phase/ 60 Cycle Equipped With: Reverse pulse filter cleaning System Overall Dimensions.115" H x 40" D x 56" W. Weight.2.000 lbs. est. FOB.Casa Grande. AZ. Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 ... moreAbout Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers) CMM's, parts washers, radial arm drills, drill presses, dust collectors, generators, transformers, grinders(tool& cutter, universal, surface, drill) lathes(vertical, horizontal, wheel) ovens, furnaces, process equipment, hydraulic pumps, turret punches, ironworkers, plate rolls, power hack saws,
|
|
|
Donaldson Torit Unimaster DCE Unimaster Dust Collector Model No UMA72G1AD
FOR SALE IS A Donaldson Torit Unimaster DCE Unimaster Dust Collector Model No UMA72G1AD USED No Manual See Picture for Actual Description Call 423-505-5748 Pick Up Location is Santa Clarita 91350 You can Arrange your Our Shipping
|
|
|
DONALDSON TORIT MODEL B1 1-1/2 HORSE POWER DUST COLLECTOR VACUUM
DONALDSON TORIT MODEL B1 1-1/2 HORSE POWER DUST COLLECTOR VACUUM Model B1 208 volt 3 ph SER J 3804 1-1/2 HP MANUAL'KICKER' BAG SHAKER CLEANOUT TRAY IN BOTTOM UNIT SEALS TIGHT AND WORKS LIKE A CHAMP! THIS IS A VERY EFFECTIVE UNIT. INSPECTION: This machine is under power and we are available by appointment so you can see this machine. Operate it if you wish and determine for yourself the condition and appropriateness for your application. PAYMENT& REMOVAL(PLEASE READ) WE RESERVE THE RIGHT TO PUT THE LOT UP FOR SALE AGAIN IF PAYMENT IS NOT RECEIVED WITHIN 48 HOURS OF THE AUCTION'S CLOSE. REMOVAL MUST TAKE PLACE BEFORE SEPT 16TH 2014. OTHERWISE THIS MACHINE WILL BE TREATED AS ABANDONED PROPERTY REMOVAL IS BY APPOINTMENT. WE ARE AVAILABLE MONDAY THRU FRIDAY, 8AM TO 4:30PM. IF YOU NEED A DIFFERENT PICKUP TIME PLEASE ASK, WE WILL ... moreDO OUR BEST TO ACCOMMODATE YOU. FOR LOCAL PICK UP WE WILL LOAD THE UNSKIDDED MACHINE ONTO YOUR TRUCK AT NO ADDITIONAL CHARGE. FOR LTL FREIGHT THAT YOU ARRANGE AND PAY FOR. ADD $25 TO: PREP MACHINE MECHANICALLY SECURE AND BOX LOOSE PARTS STRAP TO PALLET STRETCH WRAP DETAILS FOR YOUR LONG HAUL QUOTE: PALLET WEIGHT: 275# PALLET SIZE: 48" x 48" x 52"h ORIGIN: EAST STROUDSBURG. PA 18301 COMMERCIAL BLDG W LOADING DOCK DRIVER DOES NOT ENTER BLDG IF YOU NEED HELP WITH RIGGING QUOTES WE CAN REFER YOU. JUST ASK.
|
|
|
Donaldson Torit Model TD-3-54 Dust Collector 2 HP 3 Phase 230/460 V American Fan
Up for your consideration is a Donaldson Torit Model TD-3-54 portable dust collector. Serial#IG032267. It has an American Fan Co. AF-12 blower, B-51553-2, and it is run by a 2 hp, 3450 rpm, 230/460 volt, 3 phase Baldor motor. It has a 12 foot flex hose, and it is mounted on a steel, rolling cart with fork slots. This unit is in good working condition and has two filters. There are various scratches and some residue on the various pieces. Please ask any questions you might have. Make sure to look at the other tools and equipment that I currently have listed. I prefer this to be picked up and I will load on your truck for free. If you want to ship please make your own arrangements. But if you need help in this area, just ask. If it is going to be shipped I charge $40.00 for palletizing. If you have any questions you can reach me at 618-559-6011 ... moreand ask for Andrew or leave a message and I will get right back to you.
|
|
|
DONALDSON TORIT VIBRA SHAKE DUST COLLECTOR MODEL VS2400
Donaldson Torit VIBRA SHAKE Dust Collector Model VS2400 Dust Collector Information Lot Number Dust-2245 Manufacturer Donaldson Torit Model VS 2400 Serial IG 417276 Sound Level 81 dB(A) Air Flow Range 2400(cfm) Number of Filters 2 Intake Dia. 8 in Motor 5 hp Motor Speed 3450 rpm Filter Area 270 sq.ft Dust Storage Area 3.6 cu.ft Housing Construction 12 Gauge Compressed Air Require 60 psi Electric requirements 208-460/ 3ph/ 60Hz Dimensions Depth 32” x Width 54” x Height 81” Weight 960 lb Last used pharmaceutical Other Specifications· Shaker motor 1/8 HP· Two Stage Filtration· Dust Drawer Base Condition USED. IN GOOD WORKING CONDITION Location Miami. FL USA Unit is removed and ready to ship. $1 50 charge for Crate(Outside of Shipping& Handling Cost) REFUND We will refund any item returned within 14 days of our shipment. Provided ... moreit is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. PAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment(CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: The shipping fee we offer it’s only to a commercial address with unloading capabilities; any additional services will incur in extra charges. Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage on day all, 30-day max. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. Skidding fees range from a minimum of $50.00 +. Fre
|
|
|
DONALDSON TORIT 1HP CABINET DUST COLLECTOR MODEL 75-AS / 550 CFM
Donaldson Torit 1Hp CABINET Dust Collector Model 75-AS/ 550 cfm Dust Collector Information Lot Number Dust-2251 Manufacturer Donaldson Torit Model 75-AS Serial 207670-1 Sound Level 60 dB(A) Air Flow Range 550(cfm) Number of Filters 1 Intake Dia. 4 in Motor 1 hp Motor Speed 3450 rpm Filter Area 120 sq.ft Dust Storage Area 0.38 cu.ft Housing Construction 12 Gauge Compressed Air Require 60 psi Electric requirements 208/230/460/ 3ph/ 60Hz Dimensions 33”L x 26”W x 76”H Weight 350 lb Last used pharmaceutical Other Specifications· MANUAL SHAKER Condition USED. IN WORKING CONDITION Location Miami. FL USA Unit is removed and ready to ship. $150 charge for Crate(Outside of Shipping& Handling Cost) REFUND We will refund any item returned within 14 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible ... morefor all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. PAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: The shipping fee we offer it’s only to a commercial address with unloading capabilities; any additional services will incur in extra charges. Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage on day all, 30-day max. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. Skidding fees range from a minimum of $50.00 +. Freight shipments must be thoroughly inspected prior to accepting deliv
|
|
|
DONALDSON TORIT VIBRA SHAKE 3HP DUST COLLECTOR. MODEL VS1200 / 1200 CFM
Donaldson Torit VIBRA SHAKE 3HP Dust Collector. Model VS1200/ 1200 cfm Dust Collector Information Lot Number Dust-2252 Manufacturer Donaldson Torit Model VS 1200 Serial 233354 Sound Level 74 dB(A) Air Flow Range 1200(cfm) Number of Filters 1 Intake Dia. 6 in Motor 3 hp Motor Speed 3600 rpm Filter Area 135 sq.ft Dust Storage Area 1.8 cu.ft Housing Construction 12 Gauge Compressed Air Require 60 psi Electric requirements 208-230-460/ 3ph/ 60Hz Dimensions 32”L x 27”W x 67”H Weight 370 lb Last used pharmaceutical Other Specifications· Dust Drawer Base Condition USED. IN GOOD WORKING CONDITION Location Miami. FL USA Unit is removed and ready to ship. $150 charge for Crate(Outside of Shipping& Handling Cost) REFUND We will refund any item returned within 14 days of our shipment. Provided it is returned in the same condition it was shipped. ... moreBuyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. PAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment(CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: The shipping fee we offer it’s only to a commercial address with unloading capabilities; any additional services will incur in extra charges. Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage on day all, 30-day max. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. Skidding fees range from a minimum of $50.00 +. Freight shipments must be thoroughly inspected prior to a
|
|
|
Donaldson Torit Dust Collector Model DFO3-3 5HP with 3 Oval filters
I have for sale a very nice Donaldson Torit DFO3-3 5hp Dust collector. This machine was put into a facility and they used it for 2 weeks and they needed a 7.5hp unit instead of a 5hp unit so we traded it back out. Has very few hours. Original filters. Machine is ready to be hooked up and ran immediately. It is 230/460V/3phase. Has a very nice heavy guage steel catch bucket below the unit that catches the heavy items. Very easy to dump and put back into the machine. The machine has automatic cleaning on the filters and that is timed. Please call 417-781-1222 if you have any further questions. Here is some more info for it: You can also go to donaldson. com and get more information on this dust collector. The Donaldson Torit Downflo ® Oval cartridge dust and fume collector now sets the standard for industrial dust collection– by providing ... morea 25% increase in airflow capacity. Improved airflow path, and a 29% increase in pulse cleaning pressure. These compact, high-efficiency units use high efficiency oval-shaped cartridge filters, especially well-suited for filtering the sub-micron dust. There are 26 Downflo Oval cartridge dust collectors models including 3 self-contained, plug and play” units: DFO 1-1, DFO 2-2, and DFO 3-3.
|
|
|
DONALDSON TORIT DOWNFLO OVAL 1.5HP DUST COLLECTOR. MODEL DFO1-1 / 800 CFM
Donaldson Torit downflo oval 1.5HP Dust Collector. Model dfo1-1/ 800 cfm Dust Collector Information Lot Number Dust-2259 Manufacturer Donaldson Torit Model DFO1-1 QS Serial 2882291 Sound Level 68 dB(A) Air Flow Range 800(cfm) Number of Filters 1 Inlet duct Dia. 6” Motor 1.5 hp Motor Speed 3450 rpm Filter Area 190 sq.ft Housing Construction 12 Gauge Compressed Air Require 60 psi Electric requirements 115/230 V/ 1ph/ 60Hz Dimensions 63” L x 31” W x Height 71” H Weight 800 lb Last used pharmaceutical Other Specifications· Ultra-Web High Efficiency Nanofiber Filter Condition USED. IN GOOD WORKING CONDITION Location Miami. FL USA Unit is removed and ready to ship. $150 charge for Crate(Outside of Shipping& Handling Cost) REFUND We will refund any item returned within 14 days of our shipment. Provided it is returned in the same condition ... moreit was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. PAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: The shipping fee we offer it’s only to a commercial address with unloading capabilities; any additional services will incur in extra charges. Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage on day all, 30-day max. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. Skidding fees range from a minimum of $50.00 +. Freight shipments must be thoroughly inspe
|
|
|
DONALDSON TORIT 3HP CABINET DUST COLLECTOR MODEL 90. 1535 cfm
Donaldson Torit CABINET Dust Collector Model 90 Dust Collector Information Lot Number Dust-2244 Manufacturer Donaldson Torit Model 90 Serial F 5895 Sound Level 60 dB(A) Air Flow Range 1535(cfm) Number of Filters 1 Intake Dia. 7 in Motor 3 hp Motor Speed 3475 rpm Filter Area 250 sq.ft Dust Storage Area 3 cu.ft Housing Construction 12 Gauge Compressed Air Require 60 psi Electric requirements 230-460/ 3ph/ 60Hz Dimensions Depth 65” x Width 25” x Height 96” Weight 900 lb Last used pharmaceutical Other Specifications· MANUAL SHAKER Condition USED. IN WORKING CONDITION Location Miami. FL USA Unit is removed and ready to ship. $1 50 charge for Crate(Outside of Shipping& Handling Cost) REFUND We will refund any item returned within 14 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible ... morefor all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. PAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: The shipping fee we offer it’s only to a commercial address with unloading capabilities; any additional services will incur in extra charges. Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage on day all, 30-day max. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. Skidding fees range from a minimum of $50.00 +. Freight shipments must be thoroughly inspected prior to accepting delivery. We ar
|
|
|
DONALDSON TORIT VIBRA SHAKE 5HP DUST COLLECTOR MODEL VS2400. 2400cfm
Donaldson Torit VIBRA SHAKE 5HP Dust Collector Model VS2400 Dust Collector Information Lot Number Dust-2245 Manufacturer Donaldson Torit Model VS 2400 Serial IG 417276 Sound Level 81 dB(A) Air Flow Range 2400(cfm) Number of Filters 2 Intake Dia. 8 in Motor 5 hp Motor Speed 3450 rpm Filter Area 270 sq.ft Dust Storage Area 3.6 cu.ft Housing Construction 12 Gauge Compressed Air Require 60 psi Electric requirements 208-460/ 3ph/ 60Hz Dimensions 54” L x 32” W x 81 H” Weight 960 lb Last used pharmaceutical Other Specifications· Shaker motor 1/8 HP· Two Stage Filtration· Dust Drawer Base Condition USED. IN GOOD WORKING CONDITION Location Miami. FL USA Unit is removed and ready to ship. $1 50 charge for Crate(Outside of Shipping& Handling Cost) REFUND We will refund any item returned within 14 days of our shipment. Provided it ... moreis returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. PAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment(CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: The shipping fee we offer it’s only to a commercial address with unloading capabilities; any additional services will incur in extra charges. Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage on day all, 30-day max. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. Skidding fees range from a minimum of $50.00 +. Freight ship
|
|
|
Donaldson Torit Dust Collector Model 75, 1HP - GOOD CONDITION, RARELY USED
DONALDSON TORIT MODEL 75 DUST COLLECTOR- GOOD CONDITION. RARELY USED. SERIAL# L2659, 60 CYCLE, PHASE 3, 1 HP Cabinet Dust Collectors Series 50-80. Reliable and cost-efficient filtration on nuisance dust generated in industrial operations. High collection efficiency of 99.9% allows recirculation of heated and/or air-conditioned plant air. Manually-operated filter shaker makes filter cleaning easy. All 60 Hz motors 1 horsepower and larger are compliant with the Energy Independence and Security Act of 2007(EISA) Quick access to dust drawers and dust pails provides easy and safe maintenance. Filter changes have never been easier with the EZ Filter Pack™. A one-piece, lightweight filter bag that installs without tools and provides a positive pressure seal. Technical Specifications: CFM: 400- 550 External static pressure: 5.50" 4.90" ... moreW.G. Velocity: 4598- 6322 FPM Inlet/Outlet sizes: 4" 3-1/2" x 7-13/32" Motor: 1 HP Filter cloth area: 120 square feet Dust storage capacity: 1.10 cubic feet Overall dimensions: 43-1/2" x 22-3/8" x 25-3/8" high Estimated weight: 245 lbs Equipped With: Foot operated shaker bag system Stack silencer This item is in good condition! LOCAL PICK-UP ONLY We can palletize. Cover and load this item for an additional fee. Please inquire. We will load your truck for free(not crated)
|
|
|
Donaldson Torit Model DFT3-12 Dust Collector with Spark Arrestor
Donaldson/ Torit Model DFT3-12"DownFlo II" Dust Collection System New Approximately 2007 1525-9450 CFM 15 HP Motor Twelve(12) Filters Six(6) Valves 40" x 94.5" x 151.3" Tall 90-100 psi Air Requirement Approx. Weight 2000 Lbs Includes: Silencer. Spark Arrestor(added new 2009) Donaldson Torit"Delta P" Electronic Controls Disconnect Unit includes disassembly and loading on flatbed truck at full purchase price. Contact seller if you need a quotation on flatbed trucking to your destination.
|
|
|
Donaldson Torit Model 81 Floor Standing Dust Collector - 115VAC 1Ph - 1-1/2 Hp
C12276 Donaldson Torit Model 81 Floor Standing Dust Collector- 115VAC 1Ph- 1-1/2 Hp- Test Ran OK- Outside dimensions of the cabinet(Not including handles. Levers, duct fittings, etc. are 28" by 28" by 48"Tall. Please review all the pictures. They are part of the description. We will load at no charge on a truck you send and pay for. If you do not have a freight carrier we can provide a freight quote. If you want a freight quote. Send the full delivery address including zip code, state if delivery address is in a commercial area(Saves the residential delivery charge) and state if there is a dock or forklift available(Saves the lift gate truck charge) We combine shipping whenever possible. Not responsible for customs charges.
|
|
|
Donaldson Torit Model VS 1200 Dust Collection System
Donaldson Torit Model VS 1200 Dust Collection System Built in“Vibra Shake” and 5 Gallon Receiver Nominal Air Flow:1200 CFM Horsepower: 3 HP 208/460 3 Phase Number of Polishing Heads: 4 stations Sound Level dB(A) 510
|
|
|
5 HP DONALDSON TORIT CABINET DUST COLLECTOR MODEL 90. 2000CFM
5 hp Donaldson Torit CABINET Dust Collector Model 90. 2000CFM Dust Collector Information Lot Number Dust-2306 Manufacturer Donaldson Torit Model 90 Serial 203571 Sound Level 60 dB(A) Air Flow Range 2000(cfm) Number of Filters 23 Intake Dia. 8” Motor 5 hp Motor Speed 3450 rpm Filter Area 250 sq.ft Dust Storage Area 3 cu.ft Housing Construction 12 Gauge Compressed Air Require 60 psi Electric requirements 208-230/ 3ph/ 60Hz Dimensions Depth 48” x Width 46” x Height 100” Weight 825 lb Last used pharmaceutical Other Specifications· MANUAL SHAKER Condition USED. IN WORKING CONDITION Location Miami. FL USA Unit is removed and ready to ship. $150 charge for Crate(Outside of Shipping& Handling Cost) The shipping service that we offer is only for the 48 lower states. It does not include Hawaii, Alaska, or any off-shore US Territories) REFUND ... moreWe will refund any item returned within 14 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. PAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: The shipping fee we offer it’s only to a commercial address with unloading capabilities; any additional services will incur in extra charges. Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage on day all, 30-day max. All items requiring a skid will have an additional skidding fee added to the items final purchase price
|
|
|
Donaldson Torit Model VS 1200 Vibra Shake Dust Collection System Pail Discharge
Donaldson Torit Model VS 1200 QS Vibra Shake S/N 3272226 1200 cfm Airflow. 135 sq.ft. Filter Area Electrical Requirements 230/60/3. Nameplate Shows 460 Volt But Unit Was Wired for 230 Volt Motor Horsepower 3 5 Gallon Pail Hopper and Leg Assembly Removed for Shipping Filter P/N P190613-016-340 Extra New Filter Element Unit is in Like New Condition Shipping Dimensions: 44" x 48" x 70" W x L x H, 475 lbs on a Pallet
|
|
|
Donaldson Torit Filter Hopper Dust Collector Model 60 w/ 3/4 HP Baldor Motor
Donaldson Torit Filter Hopper Dust Collector Model 60 w/ 3/4 HP Baldor Motor THIS ITEM IS USED AND APPEARS TO BE IN FAIR CONDITION. THERE IS SOME COSMETIC WEAR AND IS GUARANTEED TO NOT BE DOA. IT DOES NOT COME WITH ANY FILTERS OR BASKETS. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: APPROX. PRODUCT DIMENSIONS: LENGTH: 27" WIDTH: 27" HEIGHT: 47" SHIPPING WEIGHT: 235 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP TO ALL UNITED STATES; WILL SHIP WORLDWIDE. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ... moreITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUP
|
|
 |