Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Warm Tips: the Air Source of the Air Compressor Used by the Customer Needs to Be Installed with an Oil-water Separator Before Use, Otherwise a Lot of ... moreMoisture in the Air Will Run into the Motor, Resulting in the Machine Stuck 1.Description It Is Usd for Paint Mix in Paint Factory. It Is Also Used for Mixing Many Kinds of Dope. It Is Also Used for Homogeneity,Dispersing in Domestic Industry,Food Industry,Medicine Industry. It Is Safe to Use Without Spark and Anti-explosive. Specifications Working Air Pressure: 3.0~4.0bar Blade: 4" * 2 Shaft Size: 16 * 950 Mm Motor: Pneumatic Mixing Capacity: 50 Gallon /200l Tank Power: 1/2 Hp Blade Mterial: Stainless Steel Axial Diameter:15mm Blade Diameter:160mm Interface Caliber:g1/4 Total Height: 118cm Weight:8.5kg Dimension:118.00*20.00*20.00cm 2.W.
Buy It Now
Condition: Used Location: Lake Zurich, United States This is used machinery sold "as is". There are no warranties of any kind. 21" High Walls, 1.5" Cleat.
Buy It Now
Condition: Used Location: United States The Proxio Group Ltd. makes reasonable efforts to ensure accuracy of the information we provide.
Buy It Now
Condition: Used Location: Bradenton, United States Model: BOWMAN DM3-42. Die Handlers/Flippers. equipped with Spec Sheet.
1d 21h 40m 43s 0 bids
$2550.00 Now
Condition: Used Location: Dayton, United States (one) Kluge die cutter embosser with updated 2hp 3 phase motor 230/460 vac, Orion vacuum pump, pendant freestanding on/off switch. Removed from a working ... moreoperation. We will load on your truck for free.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Application It is widely used in aerospace manufacturing, shipbuilding, home appliances, coating, the food industry, medical treatment, paint, ink, printing ... moreand dyeing, cosmetics, synthetic leather, leather, tires, ceramics, ball manufacturing, and other industries. It is suitable for paint stirring in the spraying process, and also for stirring various coatings. Specification Color: Silver Blade Material: Stainless Steel Working Pressure: 1-3kg/ 2.20-6.61lb Power: 1/2HP Speed: 50-2000 rpm Stirring Capacity: 190L/50gal Blade Diameter: 15cm/ 5.
Buy It Now
Condition: Used Location: Millwood, United States Wall mount fiberglass ventilator with flange, screen guard and louvers. Fan propeller (1914 pattern) is a six blade 36"Ø with internal shroud. Requires ... more200-230/460 volt, 60Hz, 3 phase AC power. Required opening for housing: approx.
Buy It Now
Free Shipping Condition: New Location: Chino, United States It Is Also Used for Mixing Many Kinds of Dope. 1x Stainless Steel Pneumatic Paint Bracket Mixer. Mixing Capacity:50 Gallon /200l Tank. Motor: Pneumatic. ... moreEquipped with Pneumatic Motor Saving. Safe and Explosion-proof, No Sparks.
Buy It Now
Condition: Used Location: Millwood, United States
Buy It Now
$80.49 Shipping Condition: Seller refurbished Location: Galion, United States But when available in multiple quantity, the photo shown is representative of the item. We're Not Perfect!
Buy It Now
Free Shipping Condition: New Location: Chino, United States It is also used for mixing many kinds of dope. Safe and explosion-proof, no sparks. It is the best choice for open liquid drums. The mixer is easily clamped ... moreto the side of the bucket and the chucking angle can be adjusted.
Buy It Now
Free Shipping Condition: New Location: Chino, United States It Is Suitable for Paint Stirring in the Spraying Process, and Also for Stirring Various Coatings. Who Says You Can't Have Your Cake and Eat It?. Our ... morePneumatic Putty Powder Mixer Can Provide You with Efficient and Uniform Mixing!
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. Pneumatic Paint Mixer 20L 5 Gallon Tank Coating Barrel Mixing ... moreBlender With Stand. 1 Pneumatic Mixer Machine.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Suction machine is also known as plastic suction machine, feeding machine, filler, etc., suitable for short material, if the material is too long, wet ... morematerial and granulum, crushing material can not be used, easy to wind shaft, burning motor, blocking screen.
Buy It Now
Condition: Used Location: Holly, United States Related Ideal Reference Numbers: 91723. This piece is located at Ideal Machinery, Inc. on our showroom floor. It does not include manuals or printed materials. ... moreRemoving or tampering with our security seals will automatically void the warranty.
Buy It Now
Condition: Used Location: Painesville, United States Acrison Auger Feeder. » One (1) used Acrison Feeder, variable speed. » Auger is 40" long. » Model: 105-/2 Feeder. » 12" feeder bowl. » Equipped with a ... morelive bottom stainless steel feed hopper. » Hopper is flex connected to the feed chamber.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specifications: Power type: Pneumatic Mixing capacity: 5Gallon Mixing propeller rod: φ15mm stainless steel Mixing propeller:φ100mm Mixing propeller vane: ... moreStainless steel Horsepower: 1/2HP Include: 1* Pneumatic Mixer Machine Feature： This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. It come with stand and shafts with the mixing propellers shown. The height of the stand can be adjusted. It need to work with an air compressor. It is used for paint mix in paint factory. It is also used for mixing many kinds of coating material. It is also used for homogeneity, dispersing in domestic industry, food industry, etc. It is safe to use without spark and anti-explosive. The air valve switch can be used to adjust the height automatically.
Buy It Now
Condition: Used Location: Oxford, United States
Buy It Now
Free Shipping Condition: New Location: Jasper, United States Chemineer 1.5 HP agitator, stainless, model 2QED-D-1.5 clockwise rotation. OUTPUT RPM 84 MTR RPM 1800Free shipping
Buy It Now
Condition: New Location: Halls, United States SERFILCO P-62-0171-K. SERFILCO MODEL# - P-62-0171-K. W/ 3 hp MOTOR & 2 " SS PUMP. 3 hp / 2.2 kW. 2" STAINLESS STEEL CENTRIFICAL PUMP. FILTER TECHNOLOGY ... moreMODEL # 8-30-2P- -150-4S-ES-PB-DP. WEG MOTOR OVERALL BASKET LENGTH - 27 ".
Buy It Now
Condition: Used Location: Holly, United States Related Ideal Reference Numbers: 134726. with Sumitomo Cyclo Drive. 385 Ton Sumitomo Injection Molding Machine. This piece is located at Ideal Machinery, ... moreInc. on our showroom floor. It does not include manuals or printed materials.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: ... more1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in.
Buy It Now
Condition: For parts or not working Location: Johnson City, United States Reference Number : #92740. Manufacturer: CHEMINEER. Lot of 4 Chemineer mixers. Model No : GTN. (2) Model: 1GTN-1, 1 HP (2) Model: 2GTN-2, 2 HP. Ratio ... more: 26.66.
Buy It Now
Condition: Used Location: Millwood, United States BURNER INFO: Ovenpak 400 Gas Burner (Size 432M) 2,250,000BTUH. Natural Gas Train Assembly (1 1/2" pipe size).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: ... more1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specifications Motor: Pneumatic Mixing capacity: 50 Gallon /200L Tank Power: 1/2 HP Blade mterial: stainless steel Weight: 20lbs Size: 50*8*7 inch Feature ... more304 Stainless Steel Blade, Shaft and Coupler Easy Cleanup Augers High Solids Reduces Mix Time by 50%-80% Decreases Air & Electric Consumption by 50% Unique cut design creates superior dispersing and greater breakdown of agglomerates Item Included: 1 x 50gallonTank Barrel Mixer.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. Pneumatic Paint Mixer 20L 5 Gallon Tank Coating Barrel Mixing ... moreBlender With Stand. 1 Pneumatic Mixer Machine.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing results. ... moreAre you still struggling to stir the raw material manually?.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: ... more1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in.
Buy It Now
Condition: Seller refurbished Location: Worcester, United States Parts Details ~ No. 10921. 16" x 24" chute size. Cost is for pick-up only.
Buy It Now
Condition: New – Open box Location: Chandler, United States
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Power type: Pneumatic Mixing capacity: 5Gallon Mixing propeller rod: φ15mm stainless steel Mixing propeller:φ100mm Mixing propeller vane: ... moreStainless steel Horsepower: 1/2HP Include: 1* Pneumatic Mixer Machine Feature： This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. It come with stand and shafts with the mixing propellers shown. The height of the stand can be adjusted. It need to work with an air compressor. It is used for paint mix in paint factory. It is also used for mixing many kinds of coating material. It is also used for homogeneity, dispersing in domestic industry, food industry, etc. It is safe to use without spark and anti-explosive.
Buy It Now
Condition: Used Location: Millwood, United States
Buy It Now
Condition: Used Location: Holly, United States Related Ideal Reference Numbers: 115702. This piece is located at Ideal Machinery, Inc. on our showroom floor. with Baldor Motor. 8.1-7.6/3.8 Amp. It ... moredoes not include manuals or printed materials. Removing or tampering with our security seals will automatically void the warranty.
Buy It Now
Condition: Used Location: Middlebury, United States Prefer to pick it up yourself?. Weight (lbs, oz): 197. Warehouse Location: NA20152. Model: MPH5-PG5. BULLSEYE INDUSTRIAL SALES, LLC. LOCAL PICK-UP. Lister: ... moreLS. Will there be a dock or forklift.
Buy It Now
Condition: Used Location: Holly, United States Related Ideal Reference Numbers: 131903. FREIGHT POLICY. It does not include manuals or printed materials. Removing or tampering with our security seals ... morewill automatically void the warranty. Located at: 10230 N. Holly Rd, Holly MI 48442.
Buy It Now
Condition: Used Location: Trenton, United States Click To Enlarge- Used- Farrel Banbury Mixer. Model F80. Approximate 80 liter, 21 gallon, 116 pound working capacity. Chrome plated chamber, carbon steel ... morejacketed, drop door design. Wing style cored rotors, approximately 30-105 RPM. 10-1/2" x 24" feed opening with ram feeder. Driven by a 400 HP, 500 Volt, 1150/2300 RPM DC motor thru a Farrel gearbox, drive ratio 11.652:1. Includes a Farrel 2 HP hydraulic power pack, 2) Viking pumps, 1) modular force feed lubricator, Lubriquip Sentinel lube system, 440 Kva transformer, control panel and a Reliance Maxpak Plus VS drive panel. ref# 89079 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Buy It Now
$91.36 Shipping Condition: Used Location: Del Rio, United States Model : FA2HDSS. Our assets have certified seals on them. NOT HAPPY: Call us! Give us an opportunity to help. We are good people and willing to help. ... moreYELLOW TESTED > CONNECTED TO POWER OR ATTEMPT TO START: When possible we attempt to PLUG IN or POWER UP the asset in liquidation.
Buy It Now
Condition: Used Location: Washington, United States Moore Jig Borer Model# 3 with Newall 2-Axis DRO Model DP7 Moore Jig Borer Model# 3 with Newall 2-Axis DRO Model DP7 Excellent Condition! MOORE TOOLS Jig ... moreBorer Serial# B1103 2HP 1725 RPM 220V 6.4/4.6 A Features: Newall 2-Axis DRO Model DP7 T-Slot Work Table Work Light Protective Rubber Drape Covering TABLE SIZE: 11" X 24" TABLE. LONGITUDINAL TABLE TRAVEL: 18" CROSS TABLE TRAVEL: 11" SPINDLE HOUSING TRAVEL: 12" SPINDLE QUILL TRAVEL:5" TABLE TOP TO SPINDLE. MIN: 3- 7/8" MAX: 20- 13/16" SPINDLE TO COLUMN WAYS: 10" SPINDLE TO COLUMN BELOW WAYS: 13- 3/4" BORING CAPACITY:5/32" TO 5" INFINITELY VARIABLE SPINDLE SPEEDS: 60 TO 2.250 RPM. FEEDS PER REV. 3) 0.000075" 0015" 003" This item is a Genuine Moore Jig Borer. From Moore Tools of Bridgeport, CT. It has some Outstanding Features, such as a Newall 2-Axis DRO Model DP7. T-Slot Work Table, Work Light, and More. This would be a Tremendous Asset to any Toolroom, Workshop, Fabrication, or Manufacturing Setting. This unit is in Excellent Condition, and was removed from a working environment. Insurance is included in the handling fee. When purchasing an item requiring freight shipping contact us for the freight cost before paying for the item. If the buyer requests to have a transaction canceled a 15% restocking fee will be charged. Once the item is purchased the buyer is responsible for the item cost and all shipping charges. Visit my Ebay Store at. Www.davesindustrialsurplus.com All items are for sale locally so we reserve the right to end any item. Shipping Items shipped within 3 business days after cleared payment has been received. We reserve the right to ship by the carrier of our choice. Items shipped UPS will be covered if under $100. Larger items will be shipped via freight. Contact us for a quote. A $20.00 pallet fee will be included with your quote. INTERNATIONAL OVERSIZED- For oversized international shipments. Contact us for a quote prior to bidding. Customer Service Items have been tested
Buy It Now
Condition: Used Location: Pawtucket, United States Milling cutter. Gold Machinery Group. Drilling capacity: 32mm(11/4"). Swing: 405mm (15-7/8"). We’re conveniently located on the East Coast between Boston ... moreand New York. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design.
Buy It Now
Condition: Used Location: Holly, United States Related Ideal Reference Numbers: 132127. This piece is located at Ideal Machinery, Inc. on our showroom floor. 230/460 Volt. It does not include manuals ... moreor printed materials. Removing or tampering with our security seals will automatically void the warranty.
Buy It Now
Condition: Used Location: Canada #6187 - MIXER, TOP ENTRY, 2 HP SCRAPE AGITATOR, STAINLESS STEEL. -MOTOR: 2 HP, 330/575 VOLT, 1740 RPM. -TWO SETS OF 16 SCRAPERS.
Buy It Now
Condition: Used Location: Holly, United States Related Ideal Reference Numbers: 44579. This piece is located at Ideal Machinery, Inc. on our showroom floor. Located at: 10230 N. Holly Rd, Holly MI ... more48442. It does not include manuals or printed materials.
Buy It Now
Condition: Used Location: Holly, United States Related Ideal Reference Numbers: 68121. Located at: 10230 N. Holly Rd, Holly MI 48442. FREIGHT POLICY. It does not include manuals or printed materials. ... moreRemoving or tampering with our security seals will automatically void the warranty.
Buy It Now
Condition: Used Location: Antioch, United States ee Dee Volumetic Cup Filler, Model BE-264, S/SUsed Spee Dee rotary volumetic cup filler, model BE-264-1/2- B-343, stainless steel product contract surfaces, ... morewith (4) cup head, with servo driven filling head with 3.5 hp motor, agitated hopper with 1 hp dc motor on stand with controls, serial# 4427.Customer Pickup EXW Seller's **Message or call..4193158999, FOB LOcation..Any crating costs needed and shipping paid for by customer.Items sold as is subject to inspection with written Order As items are offered on our site as well as EBay, please message or call to confirm
Buy It Now
Condition: Used Location: Holly, United States Related Ideal Reference Numbers: 12050. This piece is located at Ideal Machinery, Inc. on our showroom floor. It does not include manuals or printed materials. ... moreRemoving or tampering with our security seals will automatically void the warranty.
Buy It Now
Condition: Used Location: Millersburg, United States Lift Tables. Motor is wired for 480V. Information and Support. Our mission is to empower industries with the tools and solutions they need to thrive in ... morea dynamic and ever-evolving marketplace. Our Mission.
Buy It Now
$15.55 Shipping Condition: New Location: Rochester, United States Motor Type Capacitor Start/Capacitor Run. FOR USE WITH GPM of Water @ 60 Ft. of Head 54.3. GPM of Water @ 50 Ft. of Head 85.3. GPM of Water @ 40 Ft. of ... moreHead 107.8. GPM of Water @ 30 Ft. of Head 127.7.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Power type: Pneumatic Mixing capacity: 5Gallon Mixing propeller rod: φ15mm stainless steel Mixing propeller:φ100mm Mixing propeller vane: ... moreStainless steel Horsepower: 1/2HP Include: 1* Pneumatic Mixer Machine Feature： This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. It come with stand and shafts with the mixing propellers shown. The height of the stand can be adjusted. It need to work with an air compressor. It is used for paint mix in paint factory. It is also used for mixing many kinds of coating material. It is also used for homogeneity, dispersing in domestic industry, food industry, etc. It is safe to use without spark and anti-explosive. The air valve switch can be used to adjust the height automatically.
Buy It Now
$795.00 Shipping Condition: Used Location: South El Monte, United States STAINLESS STEEL RIBBON BLENDER MIXER IN GREAT CONDITION APPROXIMATELY 6.5 CU FT TUB DIMENSIONS ARE 27” X 21” X 23”H 220V 1PH GEAR MOTOR WEG MOTOR 1.5 ... moreKW 2HP TESTED AND WORKING BEING SOLD AS IS TESTED AND WORKING NO RETURNS ACCEPTED ASK QUESTIONS PRIOR TO BIDDING $795 STANDARD SHIPPING FEES APPLY TO LOWER 48 STATES ONLY ADDITIONAL FEES APPLY TO A RESIDENCE OR LIMITED ACCESS OR LIFT GATE NEEDED ON DELIVERY
Buy It Now
Condition: Used Location: Sun Valley, United States ALCATEL 2008A DUAL STAGE ROTARY VANE VACUUM PUMP Franklin 1/2 HP 115V Motor Turned on and pulls vacuum LOC# E-4 2-2014 Powered by The free listing tool. ... moreList your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: This Pneumatic Mixer Is in Good Working Condition. It Is Used for Mixing Paint, Dope, Etc. It Come with Stand and Shafts with the Mixing Propellers ... moreShown. The Height of the Stand Can Be Adjusted. It Need to Work with an Air Compressor. It Is Used for Paint Mix in Paint Factory. It Is Also Used for Mixing Many Kinds of Coating Material. It Is Also Used for Homogeneity, Dispersing in Domestic Industry, Food Industry, Etc. It Is Safe to Use Without Spark and Anti-explosive. The Air Valve Switch Can Be Used to Adjust the Height Automatically. Include: 1* Pneumatic Mixer Machine.
Buy It Now
Condition: Used Location: Millwood, United States Size 4" Manufacturer MOYNO Model S/N Material SS Type Progressive Cavity HP 7.5 Horz/Vert H RPM 1750 Description 4" in/out Moyno driven by 1750 ... morerpm. 7.5 HP, Dodge-TM Gear 5.1:1 Ratio, Output 343.14. We have many sizes of moyno pumps in stock. Contact us if you are looking for something specific. If you have any questions. Please contact Frank at cell 856-491-0637 or email frankb@ecrecon.com You may be interested in other Industrial Equipment we have listed on Ebay. Click the link below to go into our Ebay store and view items. When in the Store. Be sure and sign up for our Newletter that sends you our new listings automatically. lt Ecrecon Ebay Store MACHINE SAFETY: It is the users responsibility to provide proper saftety devices. Procedures and equipment to safegaurd the machine, or machines, to conform to Federal, State and Local Government Saftey Standards and all Industry Safety Standards. Indemnification: High Bidder/Buyer Agrees to Idemnify and hold harmless Seller of and from any and all claims or liabilities, warnings, or recommendations available from the original manufacturer, or by failure of the user to comply with Federal, State, and Local Laws applicable to such equipment including the Occupatioal Safety and Health Act of 1970. The high bidder agrees to there terms and conditions! Thank You! Price and Availbility are subject to change without notice! The BUYER PAYS ALL SHIPPING COSTS. Everything is offered'As is Where is" in Pedricktown. NJ 08067, unless otherwise noted. Contact us for a shipping quote! We accept PayPal. Cashier Checks and Money orders for all items. Powered by
Buy It Now
$1000.00 Shipping Condition: Seller refurbished Location: Apple Valley, United States 35 kW 10kHz, 460 Volt, 3 Phase, 44 KVA. Output 35 kW, 440-volt 10 kHz.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. Pneumatic Paint Mixer 20L 5 Gallon Tank Coating Barrel Mixing ... moreBlender With Stand. 1 Pneumatic Mixer Machine.
Buy It Now
Condition: Used Location: Millwood, United States Used 48" Dia. Top cover with 2"Ø center inlet and 9"Ø vent/inspection ports. All prices are FOB Millwood WV unless otherwise noted. S.O. # 4888C-167.
Buy It Now
Condition: New – Open box Location: Millwood, United States Vacuum: 23.6 in. Serial No.: A 2990686. Drive: 8.85HP (6.6kW), 1150RPM @ 60Hz. Air cooled operation, integrated suction air filter, low power consumption. ... moreLine Connection: 2"NPT.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. Pneumatic Paint Mixer 20L 5 Gallon Tank Coating Barrel Mixing ... moreBlender With Stand. 1 Pneumatic Mixer Machine.
|