|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: Used Location: Muskegon, United States SCC MACHINERY. INC. 1869 LINDBERG DR- MUSKEGON. MI 49441 Putnam Tool End Mill Holder Weldon Shank Reducer 2.5" 2 1/2" to.750" 3/4" ... moreUp for sale we have a good used Putnam tool holder shank reducer. These holders are surplus and no longer needed. Please see below for measurements and dimensions. I am here to answer any questions you may have and please feel free to check out my eBay store for more great machinery and robotics. Putnam Tool 2.50" Shank to.750 Weldon Shank. Dimensions- See Picture Above A- 1.87 B- 3.08. All of our tool holders show normal wear but are in good used condition and ready to put to work. LOC# 038-4. Payment Information We accept PayPal. All major Credit Cards, as well as Business and Personal Checks. VERY IMPORTANT: Please note. We only accept PayPal and Credit Cards on invoices less then $3,000. An invoice over $3,000 will need to be paid by Check or Bank Wire. All items are held until payment clears. All Payments must be recieved within one week of auction close. General Shipping Information For packaging 1-149 pounds shipping will be via UPS Ground. Buyers to pay a calulated shipping fee. OUR MISSION STATEMENT AT SCC MACHINERY. INC. WE DO OUR BEST TO BUY AND SELL QUALITY NEW AND PREOWNED EQUIPMENT OF MANY TYPES. WE DO OUR BEST TO DESCRIBE OUR PRODUCTS WITH ALL GOOD AND BAD OF THE ITEMS. WE WILL DESCRIBE TO YOU ANY FLAWS OR DEFECTS TO THE ITEM TO MAKE THE SALE A SUCCESS AND EASE OF PURCHASE TO YOU, OUR CUSTOMER. PLEASE CHECK OUT OUR FEEDBACK LIST, WE EXPRESS TO OUR CUSTOMERS TOTAL SATISFACTION AND IT WILL BE MADE RIGHT TO YOU. Terms and Conditions OUR WARRANTY POLICY FOR ITEMS IS 30 DAYS FROM PURCHASE. BUYER PAYS RETURN SHIPPING OR FRIEGHT. IF YOU HAVE A PROBLEM PLEASE FEEL FREE TO CONTACT US FOR ANY HELP WE CAN EXTEND TO YOU. ON ELECTRICAL ITEMS WE WILL WARRANTY THEM FOR NOT BEING DEAD ON ARRIVAL(DOA) AFTER THE WARRANTY PERIOD, IF SOMETHING SHOULD GO WRONG PLEASE CALL. WE WILL TRY TO HELP YOU WITH A REPLACEMENT PART IF IT IS IN STOCK. Final Closing Statement ITE
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States Manufacturer: WELDON, PUTNAM, & OTHERS. WELDON, PUTNAM, & OTHERS. SOLD BY M & J TOOLING LLC. Condition: Used. SHANK HAS BEEN MODIFED SEE PICTURE. MPN: ... moreMB6549AB2.
Buy It Now
Free Shipping Condition: New Location: Millington, United States
Buy It Now
$6.47 Shipping Condition: Used Location: Putnam, United States
Buy It Now
$8.70 Shipping Condition: Used Location: Lorain, United States Up for sale is a 4 Piece Lot of 1/2" Shank 4-Flute End Mills: 13/32", 7/16", 15/32", 1/2", Weldon, Putnam.Made in the USA. Used in good condition.
Buy It Now
$15.95 Shipping Condition: Used Location: Clinton Township, United States (11) Larger End Mills, Mill, 1-1/4" Shank, Morse, Regal Beloit, Others, Reground. Normal use will show. 1.268" 1-1/4" 3-3/4" Weldon Light use. 1.089" ... more1-1/4" 5" Weldon - Sharp. 1.079" 1-1/4" 3-1/2" Lightly dull.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States SIZES RANGE FROM 1/2 TO 1 5/8. TOOLING LOT. LOCATION: WB16-2-4-4. Condition: Used. TOOLING IS USED BUT NOT USED UP. MPN: AB0504FKB.
Buy It Now
$8.95 Shipping Condition: Used Location: Newburgh, United States Condition varies. See photos for more details.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States SIZES RANGE FROM 7/32 TO 1 1/2 -- INCLUDES 3/4, 7/8, 1", 1 1/4. TOOLING LOT. LOCATION: WB6-1-2-1. Condition: Used. TOOLING IS USED BUT NOT USED UP. MPN: ... moreAB0613LVR.
Buy It Now
Free Shipping Condition: New – Open box Location: Spencer, United States Length of Cut: 1.6250" / 41.27mm. Material: High Speed Steel. Decimal Equivalent: 0.7500" / 19.05mm. Overall Length: 3.8750" / 98.42mm. Surface Condition: ... moreBright. Center Cutting: No. Hand of Spiral Cut: RHS / RHC.
Buy It Now
$14.95 Shipping Condition: Used Location: Clinton Township, United States We sorted these out from a larger lot and removed all the obvious junk. Most are reground. Normal use will show. One is still wax coated from sharpening. ... moreThe list shows the size we checked with a caliper.
Buy It Now
Free Shipping Condition: Used Location: Philadelphia, United States PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT ... moreUNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1 On May-21-14 at 19:35:41 PDT. Seller added the following information: PLEASE DISREGARD THE STATEMENT ABOUT THE WOOD STAND. IT DOES NOT APPLY TO THIS AUCTION. IT IS A MISTAKE. THANK YOU*
Buy It Now
Free Shipping Condition: New – Open box Location: Spencer, United States PUTNAM END MILL 94251. Shank: Straight w/ Weldon Flats. Construction: General Purpose Finisher. Material: High Speed Steel. Surface Condition: Bright. ... moreDouble Ended: No. Center Cutting: No. Hand of Spiral Cut: RHS / RHC.
Buy It Now
$9.25 Shipping Condition: Used Location: Wilmington, United States The Putnam end mill is new and the other end mill i slightly used. You are buying two end mills. We will do our best to describe each item to the best ... moreof our ability.
Buy It Now
$6.26 Shipping Condition: Used Location: Bellingham, United States Onsrud 10-06 1/4. Onsrud 18-00 1/4. Onsrud - I cant read the rest of it. Onsrud 48-005 1/4. Putnam 1/4 ( there are 2 of these). Putnam 1/8. Putnam 3/8. ... moreWe try and get it to you as quickly as we can for a good price!
Buy It Now
Free Shipping Condition: New Location: Kingman, United States LENGTH OF CUT:2.0" LONG LOC. CENTER CUTTING: NO. FACTORY SQUARE CORNER. MANUFACTURER:USA PUTNAM TOOL.
Buy It Now
$19.20 Shipping Condition: Used Location: Aurora, United States All appear to be in good shape. Various shaft sizes and types. You get it all.
Buy It Now
$5.40 Shipping Condition: New Location: Lancaster, United States Antique Slot Machine/ Mills/ Assorted Reel Strips Antique Slot Machine Parts/ Reel Strips Up for auction is this Lot of Mills Reel Strips. Some old ... moreand original. Some new. These sets of Antique Slot Parts are for Mills Slot Machines. Thanks and Good luck Bidding. Condition: Fine; Payment Options: PayPal Shipping Options: Fixed Shipping Charges. USPS Parcel Shipping Rate: $5.25(Domestic) I will ship to: USA and Internationally,
Buy It Now
Free Shipping Condition: Used Location: New Bedford, United States MIXED LOT OF VARIOUS END MILLS. SIZES RANGE BETWEEN 3/4 DIA UP TO 1 1/4”. BOTH NEW AND USED. BEING SOLD AS IS AND AS SHOWN IN PHOTOS. YELLOW AKRO BIN ... moreIS NOT INCLUDED IN THE SALE. GREAT VALUE AND A NICE WHOLESALE LOT.
Buy It Now
$18.40 Shipping Condition: Used Location: Hamburg, United States Pictured lot of HSS End Mills from quality makers including Weldon, Putnam, Regal, BTC, & Hanita. All appear to have been freshly sharpened and includes ... moresquare end cut, corner chamfer, Tapered, and Corner Radius.
Buy It Now
$12.00 Shipping Condition: New – Open box Location: Venice, United States Putnam Tools 97839 1/4" x 3/8" x 5/8” 4 Flute Tin Single Roughing End Mill QTY 2 ---Product Specifications Tool diameter 1/4″ Coating TiN Shank Size 3/8″ ... moreEnd Shape Square Cutting Length 5/8″ Flute Type Coarse O.A.Length 2–7/16″ Helix angle CW Shank Type Weldon No. of flutes 4 Cutting Edge Material HSSCoPM MSRP: $70 Surplus item in factory packaging. You are purchasing 2 end mills. Dina/021714/Cab Fishsticks / Bin 88 / 1297 NB/9-18-15 Modified by Joebell 10-27-16.
Buy It Now
Free Shipping Condition: New – Open box Location: Spencer, United States PUTNAM ROUGHER END MILL. Construction: Rougher - Flat Profile. Shank: Straight w/ Weldon Flats. Surface Condition: Bright. Double Ended: No. Hand of Spiral ... moreCut: RHS / RHC. Length of Cut: 2.0000" / 50.80mm.
Buy It Now
Free Shipping Condition: New – Open box Location: Spencer, United States PUTNAM END MILL EDP 93959. Shank: Straight w/ Weldon Flats. Material: High Speed Steel. Surface Condition: Bright. Double Ended: No. Center Cutting: Yes. ... moreHand of Spiral Cut: RHS / RHC. Length of Cut: 1.8750" / 47.63mm.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States TOOLING LOT. LOCATION: FR-10-1-D-11. Condition: Used. / LABELING MPN: AR8136AM2.
Buy It Now
$10.86 Shipping Condition: New – Open box Location: Venice, United States Putnam Tool #CBLL-71 3/16" X 3/8" 2FL Bright Coating Cobalt End Mill QTY 3 Construction:General Purpose Finisher Material:Cobalt Shank:Straight w/ Weldon ... moreFlats Hand of Spiral Cut:RHS / RHC Center Cutting:Yes Double Ended:No End Style:Square Number of Flutes:2 Surface Condition:Bright Diameter Fractional:3/16" Decimal Equivalent:0.1875" / 4.76mm Shank Diameter:0.3750" / 9.52mm Length of Cut:0.5000" / 12.70mm Overall Length:2.6875" / 68.26mm Msrp:$90.00 Model:# CBLL-71 You are buying 3 END MILLS as described and pictured. SAM 9-4-13 CAB MOBEY SHELF 3 BIN4 REAR 6473 Tommy.9.2.15 Modified By Kimmy 09-15-2016.
Buy It Now
$11.17 Shipping Condition: New Location: Venice, United States Double End Mill. Material: Cobalt. Item QTY 4. Date april 27 21. 155 Center Ct, Venice, FL 34285. Weldon Flat.
Buy It Now
$9.65 Shipping Condition: Used Location: Hamburg, United States Two 1½" High Speed Steel End Mills Quality Made in the U.S.A. with Weldon Shank and 7¼" Overall Length. 4-Flute with corner radius. 13033 EM Lot 3/12 ... moreB2.
Buy It Now
Free Shipping Condition: New Location: Glendale Heights, United States Either with wax or box. Putnam 1/2" double end mill ball end in box in box. Putnam 3/8" end mill 4 flute 3" long in wax. Here are the NEW End mills FIRST. ... moreUSED END MILLS. the final end mill is free and is not counted in the 18 mills.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States SIZES RANGE FROM 1/2 TO 1 1/4. TOOLING LOT. LOCATION: WB6-1-2-1. Condition: Used. TOOLING IS USED BUT NOT USED UP. MPN: AB0615LVR.
Buy It Now
$16.40 Shipping Condition: New Location: Derby, United States Lot 3/8" Shank End Mills 1/16" to 5/16", New in Original Tubes. one Putnam 7/32" 2 flute double end. Lot includes;. one Putnam 5/16" 2 flute single end. ... moreone Cleveland 1/4" double ball end 2 flute. one Brubaker 1/4" 4 flute single end.
Buy It Now
$18.59 Shipping Condition: Used Location: Derby, United States (FC208-4 T1140). Mixed lot of 14 end mills, lightly used, 3/32" to 1/2". Various manufacturers; Standard, Putnam, Cleveland, Brubaker, Weldon, A-Trax, ... moreNational, all are High Speed Steel. Lot includes;.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States TOOLING LOT. Condition: Used. ITEM TITLE. MPN: AR5906AR1. PRODUCT SPECIFICATIONS AND / OR LABELING.
Buy It Now
$22.00 Shipping Condition: Used Location: Hollis, United States 6 NEW 1/4" SHANK CARBIDE END MILLS. 4 FLUTE. DOUBLE END. BALL CUTTING LENGTHS AND CUTTING DIAMETERS MAY VARY. PLEASE TAKE A LOOK AT MY PICTURE. CENTER ... moreCUT. MFG 100% MADE IN USA. S/C. SE CC. PLEASE ASK ANY QUESTIONS BEFORE BUYING. PACKAGING MAY BE DIFFERENT. Be sure to add me to your! WHAT IS SHOWN IN MY PICTURE. IS THE ITEM YOU ARE BUYING. SCALE NOT INCLUDED We are a family owned business and we operate on the honor system. For any reason you have a problem with any of our tooling. Please email us, contact us through eBay, or call us anytime 1-440-897-7919. We take care of our customers to the best of our abilities. We describe our tooling as it is, we do not hide anything. Please don't hesitate to ask us any questions before purchasing. Thanks M&M Tools Corp. WE SHIP OUR ITEMS USING 1ST CLASS MAIL IF UNDER 13OZ. AND/OR PRIORITY MAIL FOR HEAVIER ITEMS. PLEASE CONTACT US IF YOU WANT THE ITEM TO GO PRIORITY EXPRESS OR TO USE YOUR FED/EX# OR UPS# WILL BE AN UP-CHARGE FOR EXPRESS DELIVERY. PLEASE NOTE 1 DAY SHIPPING IS DIFFERENT THAN 1 DAY DELIVERY. WE GET OUR PACKAGES AT THE POST OFFICE WITHIN 24 HOURS OF PAYMENT RECEIVED. EXCLUDING WEEKENDS AND HOLIDAYS.
Buy It Now
Free Shipping Condition: New – Open box Location: Centerburg, United States Size: 1"x1"x1-7/8"x6-3/8" 4 flute single EndMill. Shank: Straight w/ Weldon Flats. Material: High Speed Steel. Hand of Spiral Cut: RHS/RHC. End Style: ... moreSquare.
Buy It Now
$3.95 Shipping Condition: New – Open box Location: Cleveland, United States Construction: General Purpose Finisher. Material: High Speed Steel. Surface Condition: Bright. End Style: Square. Center Cutting: Yes. Hand of Spiral ... moreCut: STR / RHC. Length of Cut: 0.3750" / 9.52mm. Number of Flutes: 2.
Buy It Now
Free Shipping Condition: New – Open box Location: Spencer, United States PUTNAM END MILL. Shank: Straight w/ Weldon Flats. Construction: General Purpose Finisher. Material: High Speed Steel. Surface Condition: Bright. Double ... moreEnded: No. Center Cutting: No. Hand of Spiral Cut: RHS / RHC.
Buy It Now
Free Shipping Condition: New Location: Glasgow, United States Listing is for a lot of 9 end mills. 5 HSS end mills. 2 Carbide end mills, 2 Cobalt end mills All mills are used in excellent condition. The following ... moreare the descriptions: 1- 875" dia. 3 1/2" length of cut, 7/8" shank 4 flute HSS(Made in China) 1- 495" dia. 2 1/8" length of cut, 1/2" shank 2 flute Carbide(Made in USA) 1- 500" dia. 3/4" length of cut, 1/2" shank 2 flute HSS(Made in Korea) 1- 3125" dia. 3/4" length of cut, 3/8" shank 4 flute Cobalt(Ruffer) Hanita(Made in Isreal) 1- 250" dia. 3/4" length of cut, 3/8" shank 2 flute Double Ball End Cobalt(Made in USA) 1- 250" dia. 5/8" length of cut. 3/8" shank 4 flute for Double End HSS Putnam(Made in USA) 1- 1875" dia. 5/8" length of cut. 3/8" shank 4 flute for Double End HSS Putnam(Made in USA) 1- 125" dia. 1/2" length of cut. 3/8" shank 4 flute for Double End Carbide(Made in? 1- 125" dia. 1/2" length of cut. 1/4" shank 4 flute for Double End HSS(Made in USA) Please see the pictures as they depict the condition Any question please email me. Thanks
Buy It Now
$3.95 Shipping Condition: New Location: Cleveland, United States Putnam Tool End mill. Construction: General Purpose Finisher. Material: High Speed Steel. Surface Condition: Bright. End Style: Square. Center Cutting: ... moreYes. Hand of Spiral Cut: STR / RHC. Length of Cut: 0.3750" / 9.52mm.
Buy It Now
$18.43 Shipping Condition: New – Open box Location: Venice, United States Model 94874. Putnam Tools. Straight with Weldon Flat. Bright Finish. Open box unused inspected item as described, shown and pictured. 434 List Style.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States SIZES RANGE FROM 5/8 TO 1 1/2 -- MOST PIECES ARE 3/4. TOOLING LOT. LOCATION: WB6-1-2-1. Condition: Used. TOOLING IS USED BUT NOT USED UP. MPN: AB0614LVR.
Buy It Now
$10.86 Shipping Condition: New – Open box Location: Venice, United States $Putnam Tools #97823 5/8" x 5/8" x 5/8" x 2-3/4" 4F TiN FTR Cobalt End Mill Size: 5/8" Shank Diameter: 5/8" Length of Cut: 5/8" Overall Length: 2-3/4" ... more# of Flutes: 4 Material/Coating: Cobalt/TiN Shank: Straight w/ Weldon Flat MSRP: $85 Shipping dimensions: Small Flat Rate Dina-5-1-15/Cab XD/Bin#9/96285 Phil 8.27.15 DAR 2/5/16 Modified By Kimmy 08-17-2016 Modified By Kimmy 01-09-2017.
Buy It Now
$3.95 Shipping Condition: New – Open box Location: Cleveland, United States Construction: General Purpose Finisher. Material: High Speed Steel. Surface Condition: Bright. End Style: Square. Center Cutting: Yes. Hand of Spiral ... moreCut: STR / RHC. Length of Cut: 0.3750" / 9.52mm. Number of Flutes: 2.
Buy It Now
Free Shipping Condition: New Location: Rochester, United States
Buy It Now
$38.55 Shipping Condition: Used Location: Marysville, United States Morse, Goddard & Goddard, Brubaker, Weldon, Union, Putnam. Putnam A-42, HS 11/16, 1/2". Here is a Lot of 21 various End Mil Bits. I do my best to describe ... moreeach item but may make a human error.
Buy It Now
Free Shipping Condition: Used Location: Brick, United States PUTNAM TRW & Others. TOP QUALITY HSS RIGID CUTTING . 2 & 4 Flute End Mills. HSS DOUBLE END MILLS 1/32" TO 5/8" LOT OF 24 WELDON DIA NIAGARA DOALL. HSS ... moreDOUBLE END MILLS 1/32" TO 5/8" LOT OF 23 WELDON DIA NIAGARA DOALL.
Buy It Now
Free Shipping Condition: New – Open box Location: Spencer, United States PUTNAM CORNER ROUNDING END MILL. Construction: General Purpose Finisher - Corner Rounding. Hand of Spiral Cut: RHS / RHC. Center Cutting: No. Material: ... moreHigh Speed Steel. Surface Condition: Bright. Length of Cut: 0.3750" / 9.52mm.
Buy It Now
Free Shipping Condition: New – Open box Location: Spencer, United States PUTNAM END MILL. Shank: Straight w/ Weldon Flats. Construction: General Purpose Finisher. Material: High Speed Steel. Surface Condition: Bright. Double ... moreEnded: Yes. Center Cutting: Yes. Hand of Spiral Cut: RHS / RHC.
Buy It Now
$11.00 Shipping Condition: New – Open box Location: Schwenksville, United States Lead: 6.746. You are getting everything shown in the pictures. If it is not in the pictures it is not included. ϕ1" Weldon Shank.
Buy It Now
$10.40 Shipping Condition: Used Location: Roanoke, United States Welcome to Select Machine Tool Item Description: PUTNAM END MILL Specifications: List Style: 212, Construction: General Purpose Finisher, Material: Cobalt, ... moreShank: Straight w/ Weldon Flats, Hand of Spiral Cut: RHS/ RHC, Center Cutting: Yes, Double Ended: No, End Style: Square, Number of Flutes: 2, Surface Condition: Bright, Diameter Fractional: 3/4" Decimal Equivalent: 0.7500" 19.05mm, Shank Diameter: 0.7500" 19.05mm, Length of Cut: 2.2500" 57.15mm, Overall Length: 4.5000" 114.30mm, Stock No. KMWH- KEP- a) History: When you buy from Select Machine you are not only buying from a reputable dealer but also a sales and service staff with well over two hundred years of combined experience. We want you to be happy and we also want to help you in any way possible. So if you have a question or are looking for something special please call or e-mail us so that we may earn your business. We want to build relationships with our customers and the best way to do that is by providing quality products. Honest representations, value, and service. Again. We want to thank you for your time and interest and we look forward to earning your business in the near future. Shipping& Payment: In order for this to be an enjoyable experience. Please ask all questions before purchasing. All items will be shipped using UPS. Which includes free insurance up to $100. Large items will be shipped using freight carrier. Shipping will be calculated based on weight and your zip, you can obtain an approximation at UPS.com. Yes, we do combine shipping whenever possible. If you have any questions please e-mail us, and we will try to reply within 24 hours. Thank You for stopping by and please view our other items. If you are a Virginia resident 5% state sales tax will be added. FOR ALL OF YOUR AIR. TOOLING, AND MACHINING NEEDS PLEASE VISIT(PLEASE CLICK LINK ABOVE TO VISIT) Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$9.50 Shipping Condition: Used Location: Cleveland, United States WALTER BALL NOSE INDEXABLE END MILL. 2" WELDON / PUTNAM SHANK. Very good used condition, as pictured. Several available.
Buy It Now
$8.00 Shipping Condition: New – Open box Location: Schwenksville, United States (3) NIB Putnam Tools 92979 ϕ1/4 End Mills. Material: HSS. Shank: ϕ3/8" Weldon. Center Cutting. Cut Dia: 1/4".
Buy It Now
$11.17 Shipping Condition: New Location: Venice, United States Shank Type Weldon End Shape Ball Nose. Shank Size 3/8″ Flute Type Spiral Flute. Item QTY 2. Center Cut|Single-End Cutting Edge Material HSSCoPM. Date ... moreapril 13 21. 155 Center Ct, Venice, FL 34285. Loc cab N 11.
Buy It Now
Free Shipping Condition: Used Location: Muncie, United States
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States SIZES RANGE FROM 3/4 TO 2" -- INCLUDES 1", 1 1/2. TOOLING LOT. LOCATION: WB6-1-3-3. Condition: Used. / LABELING TOOLING IS USED BUT NOT USED UP. MPN: ... moreAB0610LVR.
Buy It Now
Free Shipping Condition: New – Open box Location: Noblesville, United States Item Number 94066. Mill Construction General Purpose Finisher. Mill Application General Application. Mill End Style Square. Center Cutting Yes. Surface ... moreCondition Bright. Hand of Cut Right. Overall Length 3.2500".
Buy It Now
$10.95 Shipping Condition: New Location: Candler, United States MANUFACTURER - PUTNAM / GREENFIELD INDUSTRIES. MATERIAL - HSS. TYPE - DOUBLE END MILL. WELDON SHANK - YES. COATING - TiN. LENGTH OF CUT - 2". OF FLUTES ... more- 4 EACH END.
Buy It Now
Free Shipping Condition: New – Open box Location: Cleveland, United States 1-1/2" CARBOLOY BALL NOSE MILLING CUTTER. Actual item pictured.
Buy It Now
$7.85 Shipping Condition: Used Location: Laguna Niguel, United States All have sharp cutting edges. There are a few that have rust but mostly if any rust it's on the shank. However the rust appears to be superficial which ... moreis difficult to evaluate in the photos. See sample photos.
Buy It Now
Condition: Used Location: Lewisburg, United States 17-NIAGRA 4508 1/4 HSS F66. 19-POLAND 5/8X3/16 HSS. This mixed lot is a little all over the place. As you can see in the photos the bits are in good condition. ... moreVery little rust and look lightly used.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States TOOLING LOT. SOLD BY M & J TOOLING LLC. Condition: Used. / LABELING MPN: AR5905AR1. PRODUCT SPECIFICATIONS AND / OR LABELING.
|
|
|
|
20 END MILLS PUTNAM PRO CUT CLEVELAND WELDON POHL BUTTERFIELD *6
20 END MILLS PUTNAM PRO CUT CLEVELAND WELDON POHL BUTTERFIELD Condition/I n fo: Qty- Size: 4- 1/2" 1- 7/16, 2- 5/16, 1- 7/32, 1- 1/32, 1- 15/32, 3- 1/4, 1- 9/32, 2-1/8, 2- 3/16, 1- 9/64. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Click here to get notifications of future ... moreauctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
23 END MILLS MORSE UNION BUTTERFELD PUTNAM WELDON POHL *2
23 END MILLS MORSE UNION BUTTERFELD PUTNAM WELDON POHL Condition/I n fo: Sizes Size Qty Size Qty 1 1 7/16 1 7/32 1 3/8 4 5/32 1 1/8 2 5/8 1 5/16 3 1/2 4 1/16 1 13/32 1 7/8 1 1/4 1 7/64 1 The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Click here to get notifications of future auctions ... morefavorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
|
NICE LOT OF 8 HSS END MILLS NIAGARA, WELDON & PUTNAM US & METRIC
Nice Lot of 8 HSS US& Metric End Mills Brands Include: Niagara. Weldon& Putnam Sizes Include: 4) 3/4" 3) 5/8" 1) 620 Shank Lengths: 3" 4" Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
LOT OF 2 WELDON 1/2 Double-End HS Steel 4FL End Mill PUTNAM 2FL HSS END MILL
Description YOU ARE BIDDING ON: 1- LOT OF 2 WELDON 1/2" Double-End HS Steel 4FL End Mill PUTNAM 2FL HSS END MILL 1/2" OUR LOSS IS YOUR GAIN! DON'T LET THIS DEAL GET AWAY! FEEL FREE TO MAKE OFFER. NO REASONABLE OFFER REFUSED PLEASE FEEL FREE TO ASK QUESTIONS! International buyers. We will ship worldwide, contact us before you make your purchase for an international shipping quote. If not listed as new PLEASE make sure you understand the following: They are from a working environment. They are untested and sold as-is. IF A WARRANTY IS NEEDED DO NOT PURCHASE THIS ITEM. ALL ITEMS MAY HAVE LIGHT SCRATCHES. MAY HAVE SOME SMALL DENTS OR WARE. WE TRY TO PICTURE THEM TO REPRESENT THE CONDITION THE BEST WE CAN. IF YOU NEED MORE DETAILED PICS DO NOT HESITATE TO CALL OR CONTACT US. Monday-Friday 8a.m-5p.m Eastern 1-855-869-6191* WE WILL ... moreENTERTAIN ANY OFFERS* PLEASE CONSIDER THE FOLLOWING WHEN BUYING ITEMS. WE ARE A RESALE WAREHOUSE. WE DO OUR BEST TO DESCRIBE EACH ITEM IN ITS TRUE CONDITION! If you have any question please call JAY Cell 1-574-312-4837 Office 1-855-869-6191 Thanks Again RC Resale WarehouseLocation: B-13/SKU:1990 Listed By: JMC Payment We gladly accept PayPal. Certified Funds, Credit Cards or Cash for local pickups. Payments must be received within 4 days, of RC RECYCLING providing shipping details. Shipping*Shipping price shown is for shipping in the US to lower 48 states only. International buyers. We will ship worldwide, contact us before you make your purchase for an international shipping quote. WE DO NOT USE OTHER CUSTOMER'S SHIPPING ACCOUNTS! Please ask us for shipping quotes on any item you want shipped anywhere else. We usually ship items on the day payment is received. Our shipping hours hours are from 8am-4pm Eastern time. FREIGHT SHIPMENTS: Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually
|
|
|
Lot of (12) End Mills Putnam-Weldon-England-Niagara...
For auction is a lot of 12 end mills" Niagara 1/4 45081 HSS G2 Niagara 1/4 tin tip 22080 HSS J7LD=1.321 USA Putman 5/8 M usa HS 1/2 M-speed 5/16 Weldon 13/32 AA13-3 L-80 HS(looks new) Putman 1/4 1/4" M42 ENGLAND Weldon 5/16" 162 HS Putnam 3/8" Putman 1/2" Melin ships to lower 48 USA states only payment with paypal within 3 days of the winning bid please. ships priority mail for 2.00 below cost. ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-14079f8fd83-0xfb-
|
|
|
Machinists 72 Piece End Mill Lot Weldon Putnam Merlin and More Check It Out
Up for bid is a lot of 72 machinists tools. I do not have the time to list every tool so please look at the pics you will get everything you see. This is a lot of end mills drill bits slitting saws and more. Some of the cutters are single some are double. Some of the double end mills may or may not be broken at one end. Some of the cutters have been ground for certain jobs I have preformed. Please look at the pics this is a 72 piece lot. You will get end an assortment of end mills of various sizes. Most were used in plastic and aluminum. All are in good working order and ready to go to work. I just do not need them anymore thanks for looking.
|
|
|
NICE ASSORTED LOT OF HEAVY DUTY END MILLS PUTNAM, DOALL, WELDON, CLEVELAND
Nice Lot of 13 Heavy Duty End Mills Lot Includes: Single. Double, Roughing& Bull Nose End Mills Sizes Include: 7/8" 15/16" 1" Brands Include: DoAll. Weldon, Putnam, Cleveland& Others Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
Machinists Tools End Mill Lot Putnam Weldon Merlin High Speed Steel 9 Pieces
For Bid Is A Lot Of HSS Endmills* You will get the following items as seen in the pics One Merlin 9/16 double end ball end mill One Merlin 1/2 double end Weldon end mill 2 flute One Putnam 9/16 2 flute double end mill One 1/2 2 flute double ball end mill One single end 5/8 F& D 2 flute end mill One double end 2 flute 13/32 Putnam end mill One single end 1/2 inch cutter with 1 degree taper One end mill 1/2 inch modified to a drill bit Any and All questions are welcome I do not use stock pics what you see is what you get Fast shipping
|
|
|
7 HSS DOUBLE END MILLS 3/4",13/16",(4) 7/8",1" putnam, weldon,ALL USA - GUNSMITH
7 HSS DOUBLE END MILL LOT IN GOOD USED CONDITION. THERE IS NO DAMAGE TO EDGES BUT I DO NOT KNOW HOW SHARP THEY ARE BUT THEY APPEAR TO BE SHARP. THERE IS ONE 3/4" ONE 13/16" FOUR 7/8" ONE 1" FOR A TOTAL OF 7 END MILLS. PLEASE LOOK OVER PICTURES& USE THE ZOOM FEATURE FOR A GOOD CLOSE UP LOOK. IF YOU HAVE ANY QUESTIONS FEEL FREE TO CONTACT ME WITH THEM. I WILL BE LISTING A LOT OF OTHER METAL WORKING& MACHINIST TOOLS OVER THE NEXT FEW WEEKS. THERE IS A LOT OF THEM SO SAVE ME AS A SELLER& CHECK DAILY FOR NEW ITEMS LISTED. $5.95 SHIPPING TO THE LOWER 48 U.S. STATES. THANK YOU FOR LOOKING!
|
|
|
ASSORTED LOT OF 12 DOUBLE-END END MILLS REGAL WELDON PUTNAM
Assorted Lot of 12 Metric& English Double End Mills Lot Includes: Pair of Regal Beloit Metric 10.5 x 1/2" Shank Cleveland 3/8" x 3/8" Shank Unknown 1/2" x 1/2" Shank Putnam 1/2" x 1/2" UK 1/2" x 1/2" Unknown.322 x 3/8" Shank(2) Spain 1" x 1" Putnam 1/2" x 1/2" Weldon 1/4" x 3/8" Shank 7/16" x 1/2" Shank No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same ... morecalendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
8 END MILLS by PUTNAM WELDON NIAGARA 3/8, 1/4, 3/16, 9/64, 1/16, 1/32, 3/16 *3
8 END MILLS by PUTNAM WELDON NIAGARA 3/8. 1/4, 3/16, 9/64, 1/16, 1/32, 3/16 info/sizes: Various conditions. See last photos for a more info I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send ... moreyou a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144d8d5b189-0x11f-
|
|
|
LOT OF 9 HSS END MILLS 1" SHANKS WELDON PUTNAM MELIN CLEVELAND
Lot of 9 HSS End Mills 1" Shanks Weldon Putnam Cleveland Lot Includes: 3) Weldon 1" Cut Diameter x 3-1\4" Cut Length x 5-1/2" Overall Length Weldon 1-1/4" Cut Diameter x 4" Cut Length x 6-1\2" Overall lengh Putnam 7/8" Cut Diameter x 3-7/8" Cut Length x 6-1\4" Overall Length Cleveland 1-3/8" Dia x 3" Cut x 5-1/2" OAL Melin 1" Dia x 4" Cut x 6-1/2" OAL Unknown 1-1/8" Dia x 2" Cut x 4-1/4" OAL Unknown 1" Dia x 2" Cut x 4-1/2" OAL No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on ... morePick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
Lot Weldon Putnam End Mills Endmills 40 Pieces
Some new and some used. Various sizes. 40 pieces. CONDITION- No owners name. Initials or marks etched into tool. Items shows wear consistent with age. I do my best to photograph the item from all angles to show any existing damage. SHIPPING- All items are shipped the day after payment via USPS Priority Mail. Unless otherwise specified. Priority mail takes 1-3 days depending on location. If you are based in NJ, NY, or PA the shipment may be sent first class which takes the same time to arrive. Shipping cost may not be the same as the amount of postage required to mail item. Shipping is discounted if you win more than one item. Typically the shipping cost will be the higher shipping fee plus $1 per item additional. PACKING- Fragile items may be disassembled for shipment to protect them in transit. Only items that can be easily reassembled will ... morebe disassembled. PICKUP- Local pickup in Bridgewater NJ(central NJ) is available for all items. FEEDBACK- I leave positive feedback for all buyers who make a payment. If payment is not made within 5 days. Ebay will automatically file an unpaid item claim. Posted with
|
|
|
1/2" ENDMILLS 21 LOT end MILLS MORSE WELDON USA HSS HS BRUBAKER PUTNAM CLEVLAND
This is for a 21pc lot of end mills made by various munufacterers.Most appear to be lightly used and are HSS.No missing teeth or damage like that.Have other cutters listed seperately. shipped in a box 6x6x5 with a weight of 4 pds from zip 14213. I try my best to ship the same day. I do combine shipping and you pay only actual shipping.If you buy more than 1 item please wait to receive a combined invoice.Since most of my auctions end at night it will usually be sent the next morning. Customer satisfaction is very important to me.Any questions please ALWAYS feel free to email me or call 716-390-5365 anytime between 8am and 9pm eastern standard time.I consider myself an honest person and easy to deal with.Very laid back.I would never try to talk someone into buying something. Powered by The free listing tool. List your items fast and easy and ... moremanage your active items.
|
|
|
ASSORTED LOT OF 13 SINGLE END MILLS 5/8", 3/4" & 1" SHANKS WELDON PUTNAM MELIN
Assorted Lot of 13 End Mills Lot Includes: Putnam 3/4" Dia x 1-3/4" Cut x 3-1/2" OAL w/5/8" Shank Putnam 3/4" Dia x 3-1/8" Cut x 5-1/4" OAL w/3/4"Shank(2) Weldon& SKF 3/4" Dia x 2"Cut x 3-7/8" OAL w/3/4"Shanks Chicago-Latrobe 11/16" Dia x 2" Cut x 3-1/2" w/ 3/4" Shank Putnam 7/8" Dia x 2" Cut x 4" OAL w/ 3/4" Shanks Unknown 1" Dia x 2" Cut x 4-1/8" OAL w/ 1"Shank Unknown 1" Dia x 3" Cut x 5" OAL w/ 1" Shank Unknown 7/8" x 3-1/2" x 5-1/2" w/ 7/8"Shank Melin 1-1/8" x 2" x 4" w/ 1" Shank(2) Putnam 1" x 1-1/2" x 3-7/8" w/ 1"Shank Unknown 7/8" x 1-1/8" x 3-5/8" OAL w/ 1"Shank No Reserve! Check my other auctions for more quality ... moretools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
LOT OF 7 SINGLE END MILLS 1" & 3/4" SHANKS MORSE QUINCO DOALL WELDON PUTNAM
Lot of 7 End Mills 1" 3/4" Shanks Lot Includes: 3) Weldon. Doall, Putnam(Roughing) 1" Dia x 4-1/2" Cut x 6-1/2" OAL W/ 1" Shanks Morse 1" Dia x 4-1/4" Cut x 6-3/8" OAL W/ 1" Shanks(3) Weldon 3/4" Dia x 1-3/4"Cut x 5-1/4" OAL W/ 3/4" Shanks No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been ... moremade! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
DOUBLE & SINGLE END MILLS 15/32" TO 3/4" MORSE WELDON PUTNAM TRW
Double& Single Spiral End Mills Lot Includes: Unknown 3/4" Dia x 1-3/4" Cut x 4" OAL Morse Double End 5/8" Dia x 5/8" CUT Putnam Double End 1/2" Dia x 1" Cut(2) Putnam 15/32" Dia x 1-1/8" Cut Weldon 5/8" Dia x 2-1/2" Cut x 4-1/2" OAL Doall 7/8" Dia x 1-1/2" Cut x 3-1/2" OAL Niagara 3/4" Dia x 1-1/2" Cut 3-3/8" OAL No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within ... morethe same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
ASSORTED LOT OF DOUBLE END MILLS 1/2" TO 3/32" WELDON CLEVELAND PUTNAM TRW
Assorted Lot of Double End Mills 1/2" To 3/32" Brands Include: Putnam. TRW, Cleveland, Weldon Size Range: 3) 1/2" Dia x 1-1/8" Cut(3) 7/16" Dia x 1-1/8" Cut(6) 1/8" Dia x 5/8" Cut(3) 3/8" Dia x 7/8" Cut(2) 1/4" Dia x 1/2" Cut 3/32" Dia x 3/8" Cut Many Other Sizes Included: No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping ... morerefunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
LOT OF 9 END MILLS 1" TO S 5/8" SHANKS PUTNAM WELDON CLEVELAND QUINCO
Lot of 9 End Mills Shank Sizes Range: 5/8" To 1" Cleveland Ball Nose 3/4" Dia x 1-3/4" Cut x 3-7/8" Overall Quinco 1" Dia x 2" Cut x 4" OAL Putnam 1" Dia x 1-1/2" Cut x 3-7/8" OAL Putnam 1" Dia x 2" Cut x 4-7/8" OAL Weldon 1" Dia x 2" Cut x 4-1/2" OAL Putnam 7/8" Dia x 1-1/2" Cut x 3-7/8" OAL Unknown 11/16" Dia x 1-1/8" Cut x 3-1/4" OAL Unknown 7/8" Dia x 1-1/2" Cut x 3-1/2" OAL Unknown 1" Dia x 2" Cut x 4-1/2" OAL No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept ... morePayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
HUGE LOT SINGLE & DOUBLE END MILLS 5/32" TO 3/8" SHANKS WELDON PUTNAM NIAGARA
Huge Lot of Single& Double End Mills Double End Mills Sizes Range: 5/32" To 3/8" Shanks Single End Mills Sizes Range: 3/16" To 3/8" Shanks Brands Include: Weldon. Putnam& Niagara No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction ... moreend notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14597ca80cb-0x10e-
|
|
|
HUGE LOT SINGLE & DOUBLE END MILLS PUTNAM WELDON 95 TOTAL
UP FOR AUCTION IS HUGE LOT SINGLE& DOUBLE END MILLS PUTNAM WELDON 95 TOTAL. MOSTLY SINGLE END. THE MAJORITY ARE PUTNAM HI-SPEED THEN WELDON AND SOME MISCELAIOUS. THE LARGEST ARE 1" AND WORK THEY'RE WAY DOWN. THERE ARE SEVERAL DOUBLE END. SOME HAVE BEEN RE-SHARPENED AND SOME NEED TO BE BUT THE MAJORITY IS IN GOOD CONDITION. NO RESERVE HAPPY BIDDING!
|
|
|
LOT OF 6 HSS STRAIGHT SHANK SINGLE END MILLS 1" SHANKS WELDON DOALL PUTNAM OSG
Nice Lot of 6 HSS Straight 1" Shanks Single End Mills Brands Include: Weldon.Doall, Putnam, OSG Lot Includes: Doall 1" Dia x 1-5/8" Cut Doall 1" Dia x 1-7/8" Cut OSG 1" Dia x 4" Cut Doall 1" Dia x 2-7/8" Cut(2) Weldon. Putnam 1" Dia x 2-5/8" Cut No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! ... moreTo receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
NICE LOT OF 7 HSS SINGLE END ROUGHING MILLS 3/4" TO 1" PUTNAM WELDON OSG
Nice Lot of 7 HSS Single End Roughing Mills 3/4" 1" Straight Shanks Brands Include: Putnam. Weldon& OSG Lot Includes: 1) 3/4" Dia x 1-3/4" Cut(1) 7/8" Dia x 3-1/4" Cut(1) 7/8" Dia x 4" Cut(2) 1" Dia x 4-1/8" Cut(2) 1" Dia x 6" Cut No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive ... morethe combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
LOT OF 18 HSS STRAIGHT SHANK END MILLS 3/32" TO 5/8" PUTNAM WELDON CLEVELAND
Lot of 18 HSS Straight Shank End Mills Brands Include: Cleveland. Weldon& Putnam Some Sizes Includes: 1) 3/32" Dia x 3/8" Cut(2) 1/8" Dia x 1/2" Cut(2) 3/16" Dia x 1/2" Cut(2) 1/4" Dia x 1-3/8" Cut(1) 1/4" Dia x 3/4" Cut(1) 5/16" Dia x 1" Cut(1) 1" Dia x 1-3/4" Cut(1) 5/8" Dia x 1-1/4" Cut No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru ... moreSaturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
3/4" (3) End Mills 4FL Milling Machine Machinist Tool Weldon Cleveland Putnam
Lightly used 3 end mills 3/4" See pics of actual items. Check out my other items for more great tooling.
|
|
|
LOT OF 51 SINGLE & DOUBLE END MILLS 1/8" to 1" PUTNAM WELDON MORSE B&S POHL MORE
LOT OF 51 SINGLE& DOUBLE END MILLS 1/8" to 1" PUTNAM WELDON MORSE B&S POHL& MORE ☞ ☞ ☞ Please carefully read item description and view all of the photos bellow prior to bidding. Description: Mixed lot of 51 End Mills. single and double ends. 2, 3 and 4 flutes. Sizes varies from 1/8" to 1" About 20 of them are PUTNAM with other brands included. Some of the other brands included are: Weldon. Morse, BND, TSC, POHL, BTFLD, B&S, and others. Most of them are vintage. Or just purchased a long time ago. Some have a package/sleeve just to protect it. But its the wrong package for the item. Tape measure is not included. Condition& Notes: They are in very good used condition. some look like new/never used. May Have Insignificant Scuffs. Scratches, Associated With Regular Use. Additional Information: This item ... moreis sold as pictured*Anything else not mentioned is not included* ★ USA ONLY! ★ Shipping Items will be shipped within 1 business day of receipt of payment. Shipping generally takes 2-10 business days once item is delivered to the carrier. We do not make any guarantees on the shipping time frame from the USPS. All time frames listed on eBay are only estimates. All Packages will receive tracking number. Terms Of Sale Please Do not tarnish our feedback record; this is not a one-time deal. We work hard to have every customer satisfied. Please contact us thru EBAY, We answer your questions very quickly. Thank you for your understanding! Refunds Buyer is responsible to pay for return shipping and we will refund your payment less the original shipping and handling cost. unless it was our fault. In that case we refund everything plus return charges) Combined Shipping We will combine shipping | We will credit your paypal account for any over payment. Risk free bidding* 100% SATISFACTION or your money back guarantee! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOT OF 14 HSS BALL NOSE DOUBLE & SINGLE END MILLS 1/8" TO 1/2" WELDON PUTNAM
Lot of 14 HSS Ball Nose Double& Single End Mills Manufactured By: Weldon. Putnam, Union. Cleveland& Butterfield Lot Ranges: 1/8" Dia x 1/2" Cut To 1/2" Dia x 1" Cut No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. ... moreI f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
28 End Mills 3/4" Counterbores Cutters Weldon Putnam Niagara TRW Garr Melin HSS
28 End Mills 3/4" Counterbores Cutters Weldon Putnam Niagara TRW Garr Melin HSS 28 used tools. End mills. Double end mills, counterbores, cutters. HSS. Weldon. Garr, Niagara, TRW, Weldon, Putnam, LK, Melin Tool. Largest end mill is 3/4" x 7" I think one is broken. A few look altered. Look at the pics and please ask questions before you bid. Thanks! Free shipping in the USA! I would really appreciate a note if you aren't able to pay right away. Thanks! International bidders please be aware that you're responsible for knowing your country's Custom's Rules and Fees. I ship the day after I receive your payment.sometimes even the same day. I cannot guarantee delivery times. the Post Office is in charge of that. On International purchases and any items without free shipping I will try to save you money and combine ... moreshipping when you buy more than one item. International buyers please be aware that even though I ship right away. I cannot guarantee delivery times. Your item may be held up in your country's Custom's Office. I will accept returns if notified within 14 days. I work very hard to earn Positive Feedback and 5-Star DSR ratings. So before leaving anything less, please get in touch with me. I'm sure we can come to a satisfactory conclusion! Thank you for visiting! Please let me know if you would like more info. Measurements or photos. I will be happy to oblige!
|
|
|
Lot of 7 End Mills WELDON HSS PUTNAM BTFLD, OAL 8-1/2",7-1/4",7", 6-1/2", 3-1/2"
Lot Of 7 Machinist End Mills Lot 1"x 8.5"1.25" x 7.25"1" x 7"1" x 6.5" MORE NOTE: UPGRADE TO PRIORITY MAIL FOR JUST AN EXTRA $2.00. FEATURED ITEM: Lot of(7) Large End Mills. Here is a list with length. Shank width, fluke number and maker. These end mills are used with some wear but are in Good Condition as shown. OVER ALL LENGTH.SHANK WIDTH.FLUKE.MAKER. 1) 8.5" x 1" x 4 Fluke(BTFLD) 2) 7.25" x 1.25" x 4 Fluke(HSS) 3) 7" x 1" x 4 Fluke(NO MARKINGS) 4) 6.5" x 1" x 4 Fluke(Weldon 1 AC32-7A K67-HS) 5) 6.5" x 1" x 4 Fluke(Weldon 1 AC32-7A K67-HS) 6) 6.5" x 1" x 3 Fluke(HSS XL-32L) 7) 3.5" x 7/8" x 2 Fluke(Putnam Hi-Speed 7/8) SHIPS WITHIN 24 HOURS OF PAYMENT WITH TRACKING AND DELIVERY CONFIRMATION.PLEASE CONTACT FOR ADDITIONAL INFORMATION ... moreOR PICTURES. YOU DO NOT HAVE TO HAVE A PAYPAL ACCOUNT TO SHOP WITH US* You can make a'one time' payment with paypal. If this listing states that you need to have a paypal account please contact us and will revise the listing so that you can make the purchase. We will soon accept credit cards without using paypal. Please contact us for information on payment methods. Trades are accepted. If you want to trade an item please contact us to work out the details before buying or bidding. Please contact me with form of payment within 48 hours of the auction end or risk item being re-listed. Payment are due within 48 hours after auction end or a non-payment dispute will be filed with ebay. I reserve the right to cancel bids at anytime and for any reason. Bidders with zero feedback may be deleted unless you contact me FIRST before bidding. All sales are final. Colorado Sales Tax is 4% for Colorado Residents. If the invoice is not correct please do not pay until you have contacted me first to resolve the matter. BOOK PURCHASES* All books are shipped in poly-bags or postal-paper and with tracking and delivery confirmation(domestic) Most orders are shipped within 24 hours of paym
|
|
|
LOT 8 END MILLS, WELDON, PUTNAM, HSS, OAL 6",5-3/4",5",4-1/4",4",3-1/2",2-7/8"
Lot of 8 LARGE END MILLS Lot- Length 6" 5-3/4"5"4-1/4"4"3-1/2"2-7/8" NOTE: UPGRADE TO PRIORITY MAIL FOR JUST AN EXTRA $2.00. FEATURED ITEM: Lot of(8) Large Size Machinist End Mills. Used in good condition. The measurements should be right on or'VERY' close as these are all used. A list follows with the Shank Size. Cutting Width, Total Length and Fluke Number. Please contact if you need additional info or pics. SHANK WIDTH- CUTTING WIDTH- OVERALL LENGTH- FLUKE NUMBER* 1) 1" x 1-1/4" x 6" x 6 Fluke(Weldon 1-1/2 AL48-7 868-HS) 2) 1" x 1-1/4" x 5 3/4" x 6 Fluke(Putnam HS M2) 3) 1" x 1-7/8" x 5" x 8 Fluke(no markings) 4) 1" x 1-7/8" x 5" x 8 Fluke(no markings) 5) 3/4" x 1-3/4" x 4-1/4" x 6 Fluke(Weldon but most of the markings ... moreare gone and it looks like the shank has been modified) I will add an image of the shank) 6) 3/4" x 1-1/8" x 4" x 6 Fluke(no markings but I think it's HSS) 7) 3/4" x 7/8" x 3-1/2" x 4 Fluke(HSS T.C. 8) 5/8" x 13/16" x 2-7/8" x 6 Fluke(Sharprite SR-561) SHIPS WITHIN 24 HOURS OF PAYMENT WITH TRACKING AND DELIVERY CONFIRMATION.PLEASE CONTACT FOR ADDITIONAL INFORMATION OR PICTURES. YOU DO NOT HAVE TO HAVE A PAYPAL ACCOUNT TO SHOP WITH US* You can make a'one time' payment with paypal. If this listing states that you need to have a paypal account please contact us and will revise the listing so that you can make the purchase. We will soon accept credit cards without using paypal. Please contact us for information on payment methods. Trades are accepted. If you want to trade an item please contact us to work out the details before buying or bidding. Please contact me with form of payment within 48 hours of the auction end or risk item being re-listed. Payment are due within 48 hours after auction end or a non-payment dispute will be filed with ebay. I reserve the right to cancel bids at anytime and for any reason. Bidders with zer
|
|
|
NICE LOT OF 10 HSS COUNTER BORES 9/64" TO 1/4" WELDON PUTNAM
Nice Lot of 10 HSS Counter Bores Manufactured By: Weldon& Putnam Lot Ranges: 1/4" x 7/16" To 9/64" Dia x 17/64" Cut No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your ... moreitem will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
LOT OF 6 HSS REDUCED AND STRAIGHT SHANK END MILLS 5/8" TO 1" PUTNAM WELDON TIW
Lot of 6 HSS Reduced and Straight Shank End Mills Manufactured By: Putnam Weldon TIW and Others Lot Ranges: 5/8" Dia x 4-3/8" Cut To 1" Dia x 3-1/2" Cut No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
BOX LOT 35 END MILLS, Melin, Putnam, Cleveland, Weldon, More, NO RESERVE!
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! BOX LOT 35 END MILLS. Melin, Putnam, Cleveland, Weldon, More, NO RESERVE! This is a NO RESERVE auction for a box lot of approximately 35 assorted HSS end mills. Some unused, some used. Sizes range from approximately 9/64 up to 1” There are single and double end. Two and four flute. Note some smaller ones may have a broken end. Please study the photos. Not all of them have a legible brand name. But looking through a few of them I spotted Melin, Putnam, Cleveland, Weldon and there are more. Looks like mostly USA made, but there will be some imports as well. They will be packed in a single box. But not individually wrapped. Get a deal on a nice box lot! Condition: Used See listing. andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: ... moreFixed Shipping Charges. Shipping Carrier Domestic Usps Priority Mail Small Flat Rate Box $5.95 I will ship to: United States Customer Service Policy: Will combine with other items when possible. Items generally shipped immediately after payment. Occasionally if I'm out of town or if there is a storm, there may be a delay. For overseas shipments: contact seller. a pretty image. templates with Vendio Sales Manager. Vendio provides powerful selling automation for sellers of all sizes. On Jan-28-15 at 20:24:58 PST. Seller added the following information:
|
|
|
LOT OF 24 HSS SINGLE AND DOUBLE END MILLS 3/32" TO 3/8" WELDON BTC PUTNAM
Lot of 24 HSS Single and Double End Mills Manufactured By: Weldon BTC Putnam Union Melin FastCut and Others Lot Ranges: 3/32" Dia x 5/16" Cut with 3/16" Shank To 3/8" Dia x 9/16" Cut with 3/8" Shank About us] Powered by SixBit's eCommerce Solution
|
|
|
23 END MILL CUTTERS WELDON MORSE PUTNAM AND OTHERS
23 END MILL CUTTERS WELDON MORSE PUTNAM AND OTHERS. 2- WELDON 1-3/4" A56-8 I79-NS 1-1/2 HSS 1-1/2" E.C. 1-1/4"H.S. 1-1/8HS 1-1/4" M-3 1" FALCON 1-1/2HSS CO. WELDON 1" C9 HSS 1"H.S. USA 1-1/4X1-1/4X2X4-1/2" Y/E ISRAEL MORSE 1"HS USA 1"XXM WELDON 1-1/2" J2M2 PUTNAM 2" 1-1/2HSS MORSE 1-1/4HS 2X1/2 HSS USA AA4 AND 4 OTHERS GOOD LUCK SHIPPING& HANDLING FREE
|
|
|
Lot 3 Various 3/4" Double End Mills, 2-4FL & 1-2FL, Putnam, Weldon & DoAll Used
Double End Mills This is a lot of 3 Various 3/4" Double End Mills. 2- 4 Flute& 1- 2 Flute, Putnam, Weldon& DoAll. The mills are used and may show signs of wear, use, scratching, marking and/or discoloration from the previous owner. The cutting edges appear sharp with little or no chipping. Overall the mills appear in good overall condition. Rough Measurements: Putnam 3/4" Hi-Speed 4 Flute Total Length: 4-5/8" Cutting Length 1: 7/8" Cutting Length 2: 1-5/8" Flute Length 1: 1-1/8" Flute Length 2: 2" Shaft Length Between Flutes: 1.5" Shaft Dia: 3/4" DoAll N/C HS 3/4" 4 Flute Total Length: 5-3/8" LOC: 1.5" Flute Length: 2" Shaft Length Between Flutes: 1.5" Shaft Dia: 3/4" Weldon 3/4" BB24-5 I80-HS 2 Flute Total length: 5" Cutting length: 1-3/8" Flute ... moreLength: 1-13/16" Shaft Lenght Between Flutes: 1-3/8" Shaft Dia: 3/4" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14b53338f5b-0x110-
|
|
|
Lot of 16 Putnam Tool - Weldon Tool - Forest City Mill Bits Drilling Bores
Lot of 16 Putnam Tool- Weldon Tool- Forest City Mill Bits Drilling Bores This Lot of 16 Putnam Tool- Weldon Tool- Forest City Mill Bits Drilling Bores look to be in good condition A great find for the machinist… Lot of 16 Putnam Tool- Weldon Tool- Forest City Mill Bits Drilling Bores. I really don't know anything about these. They were purchased at an estate sale from a machinist. Some of the bits have the owners initials on them. Here is what you'll receive. Putnam Tools 2- HSS 5/16 x 7/17 2- M2 CS22 11/32 x 15/32 2- CS18 9/32 x 13/32 2- CS26 M2 13/32 x 19/32 CS42 M2 21/32 x 29/32 M2 1/2 x 25/32 HSS 1/2 x 3/8 Forest City Bit& Tool 1/4 Union 5/32 050 Weldon Tool AA20-4 ~ 5/8 Dia. 5/8 shank ~ 4 Flutes ~ Double End End Mill ~ RH Cut ~ RH Spiral and 1 I don't know what it is! Everything looks to be in good condition. Lot of 16 ... morePutnam Tool- Weldon Tool- Forest City Mill Bits Drilling Bores. THANKS FOR LOOKING Most of my items for sale have been purchased from ESTATE SALES in the older. Historic and affluent areas of Metro Detroit. I HAVE BOUGHT AND SOLD A WIDE VARIETY OF UNIQUE ITEMS. ANTIQUE BOOKS AND OTHER COLLECTABLES… TAKE A LOOK AT MY FEEDBACK AND BUY WITH CONFIDENCE! Check out my! ALL THE FINE PRINT· I describe my items to the best of my ability. Therefore all sales are final unless I have misrepresented the item. I will accept returns within 14 days if there has been an error in the listing or the item is not described accurately. We do not accept returns based on buyers remorse. The item must be returned and a refund will be issued upon its arrival. Please read the description and double check the sizes BEFORE bidding. PAYMENT is due within 7 days of the auctions ending. Please contact me immediately for any extenuating circumstances. Otherwise I will assume you no longer want them item and will relist. PAYPAL is the preferred way to pay for your purchase. I will accept your check if you have a good feedback score. Please notify me before the auction ends if you are paying by check.
|
|
|
NICE LOT OF 11 HSS SINGLE END MILLS 3/4" TO 1-1/8" POHL QUINCO WELDON PUTNAM
Nice Lot of 11 HSS Single End Mills Manufactured By: Pohl Quinco Putnam Weldon and Other Lot Ranges: 3/4" Dia x 1-5/8" Cut To 1-1/8" Dia x 3-5/8" Cut No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
NICE LOT OF 17 HSS STRAIGHT SHANK SINGLE END MILLS 1/2" TO 1" WELDON PUTNAM
Nice Lot of 17 HSS Straight Shank Single End Mills Manufactured By: Weldon Putnam Niagara and Others Lot Ranges: 1/2" Dia x 1" Cut To 1" Dia x 1-3/4" Cut No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
NICE LOT OF 12 HSS SINGLE & DOUBLE END MILLS 11/64" TO 3/8" POHL WELDON PUTNAM
Nice Lot of 12 HSS Single and Double End Mills(6) Pohl: 11/64" Dia x 5/16" Cut(2) Melin: 1/4" Dia x 3/4" Cut(3) Weldon: 5/16" Dia x 3/4" Cut Putnam: 3/8" Dia x 1" Cut Hanita: 3/8" Dia x 7/8" Cut No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be ... moreinvoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
LOT OF 12 HSS SINGLE END MILLS 1/2" TO 3/4" QUINCO PUTNAM WELDON
Lot of 12 HSS Single End Mills Manufactured By: Quinco Putnam Weldon and Others Lot Ranges: 1/2" Dia x 2-7/8" Cut To 3/4" Dia x 1-3/16" Cut No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following ... moreauction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
NICE LOT OF 7 HSS SINGLE AND DOUBLE END MILLS 11/64" TO 3/8" POHL PUTNAM WELDON
Nice Lot of 7 HSS Single and Double End Mills Manufactured By: Pohl Putnam Weldon Hanita and Other Lot Ranges: 11/64" Dia x 5/16" Cut To 3/8" Dia x 1" Cut No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
LOT OF 5 HSS HEAVY DUTY SINGLE END MILLS 7/8" TO 1-1/2" PUTNAM WELDON FETTE
Lot of 5 HSS Heavy Duty Single End Mills Manufactured By: Putnam Weldon Fette and Spain Lot Includes: 2) 7/8" Dia x 3-5/8" Cut 1" Dia x 1-7/8" Cut 1" Dia x 1-13/16" Cut 1-1/2" Dia x 3-3/4" Cut No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by ... moreus- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
LOT OF 7 HSS HEAVY DUTY SINGLE END MILLS 1" CLEVELAND PUTNAM WELDON NACHI
Lot of 7 HSS Heavy Duty Single End Mills Manufactured By: Cleveland Weldon Putnam Nachi KDS and Other Lot Ranges: 1" Dia x 2-3/4" Cut To 1" Dia x 4" Cut No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
Lot of 6 Weldon End Mills Drill Bits Machining Tool & Die Nice Shape & 1 Putnam
Lot of 6 Weldon End Mills Drill Bits Machining Tool& Die Nice Shape& 1 Putnam Lot of 6 Weldon End Mills Drill Bits Machining Tool& Die Nice Shape& 1 Putnam HS Bit JJA270. We currently accept PayPal only for payment. We ship almost anywhere. Just ask for a shipping qoute to your address. Larger items that are for sale via Local Pickup Only are Local Pickup Only unless buyer is willing to arrange for freight pickup and packaging charges. Buyer arranges for pickup and accepts all responsibilty for item after it leaves our store. I do not process refunds for"impulse" buys. Be sure that you want what you are bidding on. Refunds are only issued if item has been mis-represented in any way or if a piece was damaged during shipment. Buyer must provide photos of any damage so that we may present those to the consignor who ... moreoffered the piece. Many times. A return will be requested, depending on the item, because we mark(invisibly) every item that goes out for delivery so that we know, if there is a return, that it is the same item that was initially sent. I know this sounds"over the top" but the few people out there making a living from"scamming" people have made it difficult for us honest people. Since we do operate a retail facility. All items are subject to prior sale. We try very hard to remove the sold items from our listings as soon as they are sold, but again, we are human and sometimes do make mistakes. We sell a LOT of glassware and are very careful about the packaging of it. We use a LOT of bubble wrap. There is. Included in shipping charges, a small percentage to help offset the cost of packaging materials. We are an ebay consignment store. We try to do as much research as possible on the items that we are selling. But we are in no way experts. If you have questions, please ask and we will be more that happy to answer to the best of our ability. If we do not know the answer, we will tell you. If there is any problem with an item that you have received. Please contact u
|
|
 |