1/16 carbide ball end mill 4 flutes tialn coated
1/16 carbide ball end mill 4 flutes tialn coated usa made 4 flute single end diameter-0625 shank diameter-125 lenght of cut-250 lenght-1.5 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13e5433b2c8-0xf8-
|
|
5/64 carbide end mill 4 flutes tialn coated
Brand, SGS, Mill Diameter(Inch) 5/64, Number of Flutes, 4, Material, Solid Carbide, Length of Cut(mm) 4.76, Length of Cut(Inch) 3/16, Length of Cut(Decimal Inch) 0.1875, Finish/Coating, AlTiN, Overall Length(Inch) 1-1/2, Overall Length(Decimal Inch) 1.5000, Single or Double End, Single, Shank Diameter(mm) 3.18, Shank Diameter(Inch) 1/8, Shank Diameter(Decimal Inch) 0.1250, Flute Type, Spiral, Helix Angle( 30.00, Flute Direction, Right Hand, Centercutting(Yes/No) Yes, Cutting Direction, Right Hand, Extended Reach(Yes/No) No, Chipbreaker(Yes/No) No, Material Grade, Micrograin, Length Type, Regular,
|
|
1/8" carbide ball end mill tin coated -3 flutes
1/8" carbide end mill tin coated usa made 3 flute single end diameter-1/8 shank diameter-1/8 lenght of cut-300 lenght-1.5
|
|
6 mm (.236) carbide ball end mill 4 flutes coated
6 mm(236) carbide ball end mill 4 flutes coated usa made 4 flute single end diameter-6 mm shank diameter-6 mm lenght of cut.19 mm lenght-65 mm Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
3/8 carbide chamfer Mill 4 flutes tialn coated
Cutter Head Diameter(Inch) 3/8, Included Angle A 90, Overall Length(Inch) 2-1/2, Number of Flutes 2, Chamfer Mill Material Solid Carbide, Chamfer Mill Finish/Coating TiAlN, Shank Diameter(Inch) 3/8, Length of Cut(Inch) 5/16,
|
|
Niagara 2" x 12" Roughing End Mill, Tin-Coated
Offered here is a Niagara 2" x 12" Roughing type End Mill. This is Tin Coated. And has an overall length of 12" with approximately 8" of cutting surface.
|
|
1/2" Weldon USED Ski Carb Solid Carbide End Mill 3 Flute ZrN Coated
1/2" Weldon USED Ski Carb Solid Carbide End Mill 3 Flute ZrN Coated Up for auction used- 1/2" Weldon Ski Carb carbide high helix End Mill 3 flute. 1-1/4” LOC, 3-1/4” OAL Micro Carbide 1/2" Carbide Center Cutting End Mill 3 flute Carbide End Mill Mill Diameter: 1/2" Number of Flutes: 3 Material: Solid Carbide Finish: ZrN Coated Shank Diameter: 1/2" Length of Cut: 1-1/4" Overall Length: 3-1/4" Type: Center Cutting Made in USA This item is USED in TUBE. Should still have plenty of use. I have other items listed and will gladly combine shipping the best I can.
|
|
3/64" carbide ball END MILL 2 flutes tialn coated
3/64" carbide ball END MILL 2 flutes tialn coated usa made 2 flute single end diameter-1/8 shank diameter-1/8 lenght of cut-125 lenght-1.5
|
|
SGS 1/2" Solid Carbide - 4 Flute End mill 1-1/2" Ti-NAMITE Coated 39063 SGS
Used but In very good condition. Any question please feel free. Thank you Posted with Posted with
|
|
Niagara 1 1/4 72404 HSCO LD=7.245 E2 1" Deep Tin Coated End Mill 6 Flute Rougher
Niagara 1 1/4 72404 HSCO LD=7.245 E2 1" Deep Tin Coated End Mill 6 Flute Rougher- 3 1/4 Long From Tip To End Of Shank Used- Good Condition- No Box- See Photos For Details- Will Be Shipped Safe& Fast- All Photos/ Scans Are Taken Of Actual Item I Am Selling& You Will Recive So Buy With Confidence- Customer Service Is Our#1 Goal
|
|
Niagara 1 1/4" 72404 HSCO 3/4" Deep Tin Coated End Mill 6 Flute Rougher
Niagara 1 1/4" 72404 HSCO 3/4" Deep Tin Coated End Mill 6 Flute Rougher Used- Good Condition- Name Engraved On Tool- No Box- See Photos For Details- Will Be Shipped Safe& Fast- All Photos/ Scans Are Taken Of Actual Item I Am Selling& You Will Recive So Buy With Confidence- Customer Service Is Our#1 Goal
|
|
Niagara 7/8" 87282 HSS LD=5.003 CO Tin Coated End Mill
Niagara 7/8" 87282 HSS LD=5.003 CO Tin Coated End Mill Used- Good Condition- No Box- See Photos For Details- Will Be Shipped Safe& Fast- All Photos/ Scans Are Taken Of Actual Item I Am Selling& You Will Recive So Buy With Confidence- Customer Service Is Our#1 Goal
|
|
SOLID CARBIDE END MILL 3/16" 4 FLUTES ALTIN COATED MA FORD
Used 1 time. like NEW SOLID CARBIDE END MILLS = MA FORD END MILL DIAMETER = 3/16" 1875" FLUTE LENGTH = 7/16" 4375" OVERALL LENGTH = 2" SHANK DIAMETER = 3/16" CENTER CUTTING FLUTES = 4 COATING = ALTIN Be sure to add me to your! Check out my!
|
|
3/4 cobalt rough end mill 4 flutes -tialn coated
3/4 cobalt rough end mill 4 flutes-tialn coated usa made 4 flute single end diameter-750 shank diameter-750 lenght of cut-1.5 lenght-4.0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f6f1b1b29-0x103-
|
|
3/4" X 3", 1" Loc, Solid Carbide End Mill , 4 Flutes, Full Size. Coated. Used
Solid Carbide End Mills This auction is for a single 3/4" solid carbide end mill. This end mill has 4 flutes. With an overall length of 3" and a 1" length of cut. This tool is used but still cuts and can be re-sharpened. This is a full sized end mill and has one flute with a nick. Still cuts fairly good. You know what new carbide cutters of this size cost. Buy used and regrind. We buy in bulk so not all end mills will come with sleeves. Each end mill will be individually. Wrapped so they won't touch should you buy more than one. If you have any. Questions please ask early so we have time to respond. Please bid with confidence and visit our other auctions. Whenever possible we will combine to save on shipping.
|
|
1 NIAGARA 1/8 3 flute TiALN COATED SOLID CARBIDE END MILL MACHINIST TOOLS *A
1 NIAGARA 1/8 3 flute TiALN COATED SOLID CARBIDE END MILL MACHINIST TOOLS*A Many of the solid carbide end mills I am selling this week have FREE SHIPPING(USA) On my lots of end mills if you find any that are dull or not usable you can return them and I will prorate your refund. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance ... morefor overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
4 pcs. Destiny Tool Raptor 1/2" Solid Carbide Coated End Mill
4 pcs. Destiny Tool Raptor 1/2" Solid Carbide Coated End Mill 3- R63216RC.025 radius. 1"LOC, 3" OAL(retails for $61.00 each) 1- R63216C 1"LOC. 3" OAL(retails for $57.00 each) Used but still cut good. 1.11 lbs of solid carbide
|
|
1 NIAGARA 1/4 3 flute TiALN COATED SOLID CARBIDE END MILL MACHINIST TOOLS *A
1 NIAGARA 1/4 3 flute TiALN COATED SOLID CARBIDE END MILL MACHINIST TOOLS*A Many of the solid carbide end mills I am selling this week have FREE SHIPPING(USA) On my lots of end mills if you find any that are dull or not usable you can return them and I will prorate your refund. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance ... morefor overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
|
|
1 NIAGARA 7/32 TiALN COATED SOLID CARBIDE END MILL MACHINIST TOOLS *A
1 NIAGARA 7/32 TiALN COATED SOLID CARBIDE END MILL MACHINIST TOOLS*A Many of the solid carbide end mills I am selling this week have FREE SHIPPING(USA) On my lots of end mills if you find any that are dull or not usable you can return them and I will prorate your refund. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas ... moreshipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee! lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13f849538a9-0xfe-
|
|
2 NIAGARA 1/4 TiALN COATED SOLID CARBIDE END MILL MACHINIST TOOLS *A
2 NIAGARA 1/4 TiALN COATED SOLID CARBIDE END MILL MACHINIST TOOLS*A Many of the solid carbide end mills I am selling this week have FREE SHIPPING(USA) On my lots of end mills if you find any that are dull or not usable you can return them and I will prorate your refund. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas ... moreshipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee! f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f849538fa-0x103-
|
|
3/16 carbide ball end mill 4 flutes tianl coated
3/16 carbide ball end mill 4 flutes tianl coated usa made 4 flute single end diameter-3/16 shank diameter-3/16 lenght of cut-600 lenght-2.0
|
|
1/8" carbide Ball END MILL 4 flutes tialn coated
1/8" carbide Ball END MILL 4 flutes tialn coated usa made 4 flute single end diameter-1/8 shank diameter-1/8 lenght of cut-500 lenght-1.500 g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13f8974a829-0xfb-
|
|
3/16 carbide end mill 4 flutes tialn coated .015 r
3/16 carbide end mill 4 flutes tialn coated.015 r usa made 4 flute single end diameter-3/16 shank diameter-3/16 lenght of cut-625 lenght-2. Radius-015
|
|
SECO CARBOLOY 3" DIAMETER FACE MILL - COMES WITH 6 GOLD COATED CARBIDE INSERTS
SECO CARBOLOY FACE MILL R220.29- 03.00- 06.6M 101 3" DIAMETER. 1" ARBOR, 3/8" KEY WAY SLOT HOLDS& COMES WITH 6"GOLD" TiN COATED CARBIDE INSERTS IN PLACE AS SHOWN USED. WITH PLENTY OF LIFE LEFT DISTRIBUTOR'S OVERSTOCK 2 LBS ITEM A* ONLY ONE*
|
|
3/8" carbide END MILL 4 flutes (.375) with .020 radius coated
Series VRX EDP# 27660 3/8x2x1/2" VRX.020" C/R XCEED For stainless steel. Inconel, PH materials, cold rolled steel, titanium, cast iron and tool steels Reduces vibration for more aggressive machining flute dia. +.000-002 shank dia. 0001-0004 corner radius +.001-001 radius tolerance on ball end +.000-001 Edp# Flutes Flute Dia. Flute Length Shank Dia. Neck Dia. 27660 4 0.375 0.5 0.375 0.0 Overall Length Reach Length(l.b.s. Neck Length Behind Flutes Corner Radius End Type Flat? 2.0 0.0 0.0 0.02 RAD N
|
|
new 1/2 carbide end mill 4 flutes tialn coated with .030 corner radius
Mill Diameter(Inch) 1/2, Mill Diameter(Decimal Inch) 0.490, Number of Flutes 4, Material Solid Carbide, Length of Cut(Inch) 1- Length of Cut(Decimal Inch) 1. Finish/Coating AlTiN, Overall Length(Inch) 3. Overall Length(Decimal Inch) 3. Single or Double End Single, Shank Diameter(Inch) 1/2, Shank Diameter(Decimal Inch) 0.5000, Flute Type Spiral, Helix Angle( 40.00, Flute Direction Right Hand, Centercutting(Yes/No) Yes, Cutting Direction Right Hand, Extended Reach(Yes/No) No, Chipbreaker(Yes/No) No, Material Grade Micrograin, Helix Style High, Mill Diameter Tolerance(Decimal Inch) +0.000/0.002, Shank Diameter Tolerance(Decimal Inch) 0.0001/0.0004,
|
|
1/2 carbide end mill 4 flutes with .020 radius coated
1/2 carbide end mill 4 flutes with.020 radius coated usa made 4 flute single end diameter-500 shank diameter-500 lenght of cut-1.250 lenght-3.0
|
|
3/16" 4 FLUTE CARBIDE END MILL ALTIN COATED MA FORD
Used. but in good shape! SOLID CARBIDE END MILLS = MA FORD END MILL DIAMETER = 3/16" 1875" FLUTE LENGTH = 5/16" 312" OVERALL LENGTH = 1.4" SHANK DIAMETER = 3/16" CENTER CUTTING FLUTES = 4 COATING = ALTIN Be sure to add me to your! Check out my! F04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13fe58ff734-0xfd-
|
|
1/4 carbide end mill 2 flutes .015 radius tialn coated
1/4 carbide end mill 2 flutes.015 radius tialn coated lenght of end mill-2.5 lenght of flute-750 diameter-250 radius-015
|
|
New 1/2 carbide end mill 4 flutes tialn coated - with.020 radius
Tool lengh-3. Flute lenght 1.250 Diameter-480 Corner radius-020
|
|
Lot of 2 3/8" & 1/2" Niagara Cutter Carbide 4 Flute TiALN Coated End Mill
1/2" Niagara Cutter Carbide 4 Flute TiALN Coated End Mill& 3/8" Carbide 4flute Both are Niagara I listed as used but they appear new out of container. Do not look as if clamped but please view the photos to judge for yourself. Thank You!
|
|
Single End Mill 4 Flute Center Cutting TiN Coated - ReGrind - Size .616"
You are bidding on( 1) Single End Mill 4 Flute Center Cutting TiN Coated- ReGrind- Size.616" P/N 106499518. Size- 616" Shank Dia. 5/8" Flute Length- 3 3/8" OAL- 6" No. of Flutes- 4 Center Cuting. Right Hand Cutting Direction. Material- Solid Carbide. Finish/ Coating- TiN. Made in USA FREE SHIPPING in the USA only. We use Ebay Shipping Calculator to figure our shipping. We ship USPS Priority Mail unless item is listed with different shipping details. We Combine Shipping for Multiple Items. 15-R-29. Powered by
|
|
1/4 carbide ball end mill 4 flutes dark coated
1/4 carbide ball end mill 4 flutes dark coated lenght of end mill-2.5 lenght of flute-750 diameter-250 it is on great shape.no nicks Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
.5 MM carbide ball end mill 4 flutes ticn coated
5 MM carbide ball end mill 4 flutes ticn coated usa made 4 flute single end diameter-020 shank diameter-1/8 lenght of cut-100 lenght-1.500
|
|
1/32" carbide Ball END MILL 4 flutes tialn coated
1/32" carbide Ball END MILL 4 flutes tialn coated usa made 4 flute single end diameter-1/32 shank diameter-1/8 lenght of cut-125 lenght-1.5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14037b177ea-0xf9-
|
|
HSS Tin Coated End Mill Set 20 PC 3/16-3/4.2FL/4FL Titaniaum End Mill
HSS Tin Coated End Mill Set 20 PC 3/16-3/4.2FL/4FL Titaniaum End Mill Nice Box! Please see pictures with your magnifier as a more thorough description! Thank you for looking at Bob Post Antiques! Questions are welcome!
|
|
Weldon #A80-8 End Mill 2-1/2" X 3" 8 Head Cutter Tin Coated VGC!! Free Shipping
Weldon#A80-8 G69-HS. 2-1/2" eight head cutter end mill tin coated with 3" of cutting depth and is 5-1/2" O.A.L. in Very Good Condition! used only once with Free shipping. 12F5
|
|
5/8 Diameter Roughing End Mill Cobalt M42 2 1/2 Cut TiN Coated 5/8 Shank 4 Flute
This end mill is 4 5/8" long. It is non-centercutting. It is used. But in perfect cutting condition. I try to give as accurate of a description as I can and point out any flaws that I notice in an item. If I overlook something, please bring it to my attention so I can address the issue. I want you to be happy with your purchase! I offer a generous shipping discount for multiple items.
|
|
Hanita Comol M-42 1/2"x1/2"x1/2"x2 1/2" Tin Coated Roughing End Mill
Hanita Comol M-42 Tin coated roughing end mill. 1/2"x1/2"x1/2"x2 1/2" Used very little. Very nice condition. Ready to put to work. Look at the pictures.
|
|
1/64 carbide ball end mill 4 flutes tialn coated
1/64 carbide ball end mill 4 flutes tialn coated usa made 4 flute single end diameter-1/64 shank diameter-1/8 lenght of cut-03125 lenght-1.5
|
|
3/16 carbide ball end mill 4 flutes tialn coated
3/16" carbide END MILL 4 flutes(1875) usa made 4 flute single end diameter-3/16 shank diameter-3/16 lenght of cut-625 lenght-2.0
|
|
5/64 (.0781) carbide ball end mill 4 flutes coated
5/64(0781) carbide ball end mill 4 flutes coated usa made 4 flute single end diameter-0781 shank diameter-125 lenght of cut-156 lenght-1.50.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1441056f041-0x106-
|
|
END MILL-- 11/16 HSS TIN COATED SINGLE END -2 FLUTES
11/16 END MILL 2 FLUTES SINGLE END- END MILL AS PICTURED TIN COATED USED SLIGHT WEAR SHIPPING IS 1.99 in the u.s. IF ORDERING MORE THAN ONE MILL ADD.50 EACH.
|
|
2 mm (.0787) carbide ball end mill 4 flutes coated
2 mm(0787) carbide ball end mill 4 flutes coated usa made 4 flute single end diameter-2 mm shank diameter-3 mm lenght of cut-4 mm lenght-50 mm
|
|
.5 mm (.020) carbide end mill 4 flutes tialn coated
Mill Diameter(Decimal Inch) 0.020, Number of Flutes 4, Material Solid Carbide, Length of Cut(Decimal Inch) 0.0600, Finish/Coating AlTiN, Overall Length(Inch) 1-1/2, Single or Double End Single, Shank Diameter(Inch) 1/8, Flute Type Spiral, Helix Angle( 30.00, Flute Direction Right Hand, Cutting Direction Right Hand, Material Grade Micrograin,
|
|
1/16 carbide end mill 4 flutes tin coated
usa made 4 flute single end diameter-1/16 shank diameter-1/8 lenght of cut-150 lenght-1.5
|
|
Hertel 1/4" 4 Flute SE AlTiN coated solid carbide end mill
Lot of 5! Hertel 1/4" solid carbide AlTiN coated end mills. Re sharp ready not scrap! Points have some wear but side cutting edges are like new(see pictures) Ships only within the United States. PayPal payment, usually ships within 2 business days of cleared payment.
|
|
1" x 7" x 5" 4-Flute Ball End Regrinded and Recoated Tin Coated End Mill
You are purchasing a refurbished. Regrinded and recoated 1" x 7" x 5" 4-Flute Ball End Tin Coated Carbide End Mill. Please note that these end mills were regrinded so they may be a tiny bit smaller than 1" Please request an invoice for combined shipping if you're purchasing other items from me.
|
|
END MILL-- 7/16 HSS TIN COATED SINGLE END -2 FLUTES
7/16 END MILL 2 FLUTES SINGLE END- END MILL AS PICTURED TIN COATED USED SLIGHT WEAR SHIPPING IS 1.99 in the u.s. IF ORDERING MORE THAN ONE MILL ADD.50 EACH.
|
|
3/16 carbide end mill 4 flutes 4fl Coated Tialn Not Ball Nose 1/2 5/16 3/8 7/16
3/16 carbide TiAlN coated end mill Posted with
|
|
GUHRING SOLID CARBIDE END MILL 3/8 3/8 1 FIREX COATED *RE-SHARPENED* 5 PACK*
GUHRING END MILL*Professionally sharpened with precision grinding wheel SERIES: FIREX FLUTUES: 4 HELIX ANGLE:35/38 DIAMETER: 3/8 SHANK DIAMETER: 3/8 LENGTH OF CUT 1" OVERALL LENGTH 2- 1/4(5 Pack) FREE SHIPPING 100% AUTHENTIC Payment Method Shipping Methods We ship free to Canada and United States, We will ship your product within 1 bussiness day once payment is cleared. Please allow 3-10 business days for deliveries depending on your location. Buyer is responsible for their countries customs and duties. Some items might be taken out of the package to save on shipping costs, Return Policy Returns are valid for up to 7 days after buyer has received the product. Buyer is responsible for any return shipments and associated fees. Notes We want to ensure your satisfaction. Please contact us if you have any questions. Because we strive to receive ... more5-star feedback. Thank you for shopping at Discount Supply, Posted with
|
|
1" x 5-1/2" x 3-3/4" 5-Flute Regrinded and Recoated TiAln Coated End Mill
You are purchasing a 1" x 5-1/2" x 3-3/4" 5-Flute Regrinded and Recoated TiAln Coated End Mill. Please email me with any questions.
|
|
Hanita 1" 4-Flute Regrinded and Recoated TiAlN Coated End Mill
You are purchasing a regrinded and recoated 1" x 4-1/2" x 2-1/4" TiaLn coated end mill. This end mill was regrinded so it may be a little smaller than 1" Also, there is a minor chip on it.
|
|
Niagara 1-1/4" 52410 HSCO L7, 6 Flute, 6" LOC TiN Coated End Mill Used
End Mill This is a Niagara 1-1/4" 52410 HSCO L7. 6 Flute, 6" LOC TiN Coated End Mill. The mill is used and may show signs of wear, use and/or discoloration from the previous owner. None of these slight imperfections should impact the overall performance of the product. The cutting edges look good and sharp showing no signs of chipping. Overall this mill remains in excellent condition. Rough Measurements: Total Length: 8.5" Cutting Length: 6" Flute Length: 6-5/8" Shaft Length: 2" Shaft Dia: 1.25" Shipping: Charged according to location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and ... moremanage your active items.
|
|
3/4" x 5" x 3" 6-Flute Regrinded and Recoated TiAlN Coated End Mill
You are purchasing a 3/4" x 5" x 3" 6-Flute Regrinded and Recoated TiAlN Coated End Mill. Please request an invoice for combined shipping if you're purchasing other items from me.
|
|
Kennametal .417"x1"x3" 4FL Solid Carbide End Mill - KC610 TiN/TiCN/TiN Coated
This listing is for one refurbished Kennemetal solid carbide end mill Shank Diameter: 1/2" Cutting Diameter: 417" Flute Length: ~ 1" No. of Flute: 4 OAL: ~ 3" This end mill has been re-ground from an original 1/2" and re-coated This undersized end mill is ideal for finish profile of a 1/2" slot or 1/2" inside corner with less chatter. Posted with
|
|
RTW .531" with 5/64" Radius 6 FL Solid Carbide End Mill TiN Coated
This listing is for one refurbished RTW solid carbide end mill Shank Diameter: 9/16" Cutting Diameter: 531" Corner Radius: 5/64" unverified) Flute Length: ~ 1" No. of Flute: 6 OAL: ~ 3-1/2" I cut the protective wax to measure and verify all dimension but unsure about the 5/64" corner radius because I don't have a good way to check it with. Posted with
|
|
Niagara 1" 48320 HSS E7 Lead 5.667 TiN Coated, 4 Flute, 4.25" LOC End Mill Used
Main Description This is. Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
1 mm (.03937) carbide ball end mill 4 flutes tialn coated
1 mm(03937) carbide ball end mill 4 flutes tialn coated usa made 4 flute single end diameter-1 mm shank diameter-3 mm lenght of cut-3 mm lenght-50 mm
|
|
New 12 MM carbide end mill tialn coated with 3 mm corner radius
Series 830RA EDP# 24437 12mm EM 3.0mm C/R 4FL SE*TiALN Solid submicron grain carbide end mill- center cutting Dry or semi-dry machining Up to 40% faster than uncoated For stronger corners and part radius Radius tolerance +.001"001" +.025-025mm) flute dia. +0.000-0.050mm 3mm- 6mm shank dia. +.0000-0003" 0.0000-0.0075mm) 1/4" 1" shank dia. 0001-0004" 0.0025-0.0100mm) Edp# Flutes Flute Dia. Flute Length Shank Dia. Neck Dia. 24437 4 12.0 25.0 12.0 0.0 Overall Length Reach Length(l.b.s. Neck Length Behind Flutes Corner Radius End Type Flat? 75.0 0.0 0.0 3.0 RAD N
|
|
niagra 3/4 x 3/4 bouble end mill tin coated hss
like new very sharp 3/4 diameter double end mill buy niagra tin coated four flute lightly used.CHECK MY OTHER AUCTIONS AS I AM LIQUIDATING MACHINE SHOP TOOLS FROM MY CLOSED SHOP.LOTS TO. SELL AND WILL BE LISTING FOR THE NEXT FEW MONTHS.wILL COMBINE WINNINGS TO SAVE $ OR WILL CRAME AS MUCH AS I CAN IN A FIXED RATE PRIORITY BOX.THANKS AND BID AWAY.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1453b818a42-0x10d-
|
|
END MILL-- 1/4 HSS TIN COATED SINGLE END -2 FLUTES
1/4 END MILL 2 FLUTES SINGLE END- END MILL AS PICTURED TIN COATED USED SLIGHT WEAR SHIPPING IS 1.99 in the u.s. IF ORDERING MORE THAN ONE MILL ADD.50 EACH.
|
|
1/4 .25 4 Fl Flute sgs Solid Carbide End Mill Coated Endmill Not 3/16 1/2 5/16
1/4 carbide end mill sgs coated really good shape I can't tell it was used Posted with
|
|
3/8 carbide END MILL 4 flutes coated (.345)
3/8 carbide END MILL 4 flutes coated usa made 4 flute single end diameter-345 shank diameter-3/8 lenght of cut-840 lenght-2.300
|
|
8 mm carbide end mill with .5 mm radius tailn coated
8 mm carbide end mill with.5 mm radius tailn coated usa made 4 flute single end diameter- 8 mm(315) shank diameter-8 mm lenght of cut-12 mm(4724) lenght-50mm(2.015) radius-5mm(020) Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
3/4 carbide end mill 4 flutes tialn coated with .060 radius-750 diameter
3/4 carbide end mill 4 flutes tialn coated with.060 radius 4 flutes 3.9" long. 1.3" lenght of flute 3/4 shank diameter-750
|
|
GARR 1/2" SOLID CARBIDE TiALN COATED 5 FLUTE STUB END MILL # 255MA
ALL YOUR AUCTION NEEDS START@ THEPLACETOBUY1984! The Item You Are Bidding On Is a End Mill Item Specifications: Model# 255MA Cutting Diameters: 1/2" Shanks: 1/2" Length Of Cut: 1-1/4" Overall Length: 3" ITEMS COME AS SHOWN IN PICTURES. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Just a Few Simple Notes on Shipping and Other Questions Below Before Paying. Please Ask For Shipping DISCOUNTS When Purchasing Multiple Items. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive 30% discount per item. If you have ANY shipping questions, please contact us PRIOR to bidding. We apologize for any inconvenience but unless prior arrangements are discussed. We DO NOT ship ... moreinternationally. Please E-MAIL US at theplacetobuy1984@gmail.com or through eBay Messages if you have QUESTIONS or CONCERNS. Our goal is to be clear about our products and prices so that you are happy with your purchase! How to Request an Invoice so Shipping is Correct and Up To Date: 1. Click COMMIT TO BUY 2. DO NOT CLICK PAY NOW 3. Go to Ebay Summary. Under PURCHASES 4. Select MORE ACTIONS 5. Select REQUEST TOTAL. Thank You For Looking And Good Luck Bidding! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-145bffaabd4-0x106-
|
|
QUINCO 1/4 3 FLUTE HS FINISH CUT END MILL TIN COATED
QUINCO 1/4 3 FLUTE HS END MILL TIN COATED Shows signs of use. But the edges are still sharp with no chips. This item has been in storage and may show signs of dust. Grease, or surface debris. Check out my other auctions- I will combine multiple items to save on postage. Please feel free to ask any questions before bidding. Thanks for looking. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
3/16 carbide end mill 4 flutes with .030 radius tialn coated
3/16 carbide end mill 4 flutes with.030 radius tialn coated usa made 4 flute single end diameter-3/16 shank diameter-3/16 lenght of cut-600 lenght-2.
|
|
Tin Coated Mill Set 10 PCS 2F and 4F Drill Bit Cutting Tool 1/4x3/8-3/4x3/4 NR
Up for auction is a Tin Coated Mill Set 10 PCS 2F and 4F Drill Bits Cutting Tools 1/4x3/8-3/4x3/4. I put used but they appear new or used lightly. This is a NO RESERVE auction. Thanks and happy bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-146e57d43dc-0x117-
|
|
Niagra End Mill 71368 TiN coated HSCO Roughing
This end mills is slightly used and shows normal signs of wear. This wear is shown within the pictures and is very minimal. This sells for over $500.00 new and bid now to own this Quality roughing endmill manufactured by Niagara Cutter(P/N 71368) Physical Dimensions: 2" diameter. 9.5" OAL, 6" flute length, 8 flute with right hand rotation, 2" shank diameter. All items sold as is with no return policy. ALL SALES FINAL! I list all my items to the best of my ability with all details given off of the physical item itself that is being listed. I have 100% feedback, BID WITH CONFIDENCE! please feel free to email any questions. Thank you for looking and happy bidding.
|
|
1/8" carbide END MILL tialn coated 4 flutes with .010 radius
1/8" carbide END MILL tialn coated 4 flutes with.010 radius usa made 4 flute single end diameter-1/8 shank diameter-1/8 lenght of cut-5 lenght-1.5 radius-010 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-146e8b93017-0x10f-
|
|
NIAGARA SIX FLUTE SINGLE END TIN COATED END MILL 1-1/4" DIAMETER, 3/4" SHANK HSS
UP FOR SALE IS THIS NIAGARA SIX FLUTE SINGLE END TIN COATED END MILL 1-1/4" DIAMETER. 3/4" SHANK HSS. THIS IS A NIAGARA SIX FLUTE TIN COATED END MILL. 1-1/4" DIAMETER. 3/4" SHANK. HIGH SPEED STEEL TITANIUM NITRIDE. IT LOOKS LIKE THIS END MILL HAS NEVER BEEN USED BEFORE BUT I DO NOT KNOW FOR SURE. APPEARS TO BE IN GREAT CONDITION. COMES IN A BLUE PLASTIC CASE. NEEDS SOME CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK. NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ANY OTHER COUNTRIES! I WILL NOT LEAVE POSITIVE FEEDBACK UNTIL I RECEIVE POSITIVE FEEDBACK. S2162
|
|
1" Garr VHM Solid Carbide TiALN Coated 4 Flute Roughing End Mill (B 1)
Used Good Condition GARR VHM(Lot of 1) 1" x 1- 1/2" LOC x 4" OAL Solid Carbide 4 Flute TiALN Coated End Mill Roughing End Mill SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other! TX Residents must pay 8.25% Sales Tax.
|
|
Niagara Cutter 44320 End Mill Tin Coated 4F Square End 1”x 8” Bit
You Are Bidding On A Niagara Cutter 44320 End Mill Tin Coated 4F Square End 1”x 8” Bit Very Good Condition EDP# 44320 HSS ENDMILL SC406. 4F SE 30* RH Square Tin Size: 1x1x6x8-1/2( 8.5in Length x 1in Diameter) Manufactured By: Niagara Cutter. USA! Please see pictures for more details" Free Shipping" THANK YOU FOR YOUR INTEREST AND IF YOU HAVE ANY QUESTIONS PLEASE E-MAIL ME. GOOD LUCK AND HAPPY BIDDING!
|
|
.5 MM carbide ball end mill 4 fl tialn coated
5 MM carbide ball end mill 4 fl tialn coated usa made 4 flute single end diameter-5 mm shank diameter-1/8 lenght of cut-150 lenght-1.50
|
|
End Mill, 1-1/8" 6 Flute TIN Coated NIAGARA H.S.S. 4" Flute Length End Mill
For your Consideration is this Lightly Used 1-1/8" End Mill. 6 Flute. TIN Coated. NIAGARA. H.S.S. 4" Flute Length. This item is in good used working condition. Please see the pictures and email me with any questions. Please take a look at my other Ebay Stores. http:stores.ebay.com/the-toolz-guy/ http:stores.ebay.com/the-toolz-city/ http:stores.shop.ebay.com/kool-toolz/ I have a lot of nice items listed there. MB11.1-5417-8 International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. By purchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself ... moreor other people resulting from the use, abuse or misuse of this item. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-147227fa265-0x10a-
|
|
1/2" X 4 FLt Carbide End Mill Coated, 6" OAL
$45.95 1/2" X 4 Flt Carbide End Mill 6" OAL Slightly Used. TiAIN Coating. With Weldon Flat. Remember buy 4 endmills cutters and shipping is free in Cont US.
|
|
5/32" SOLID CARBIDE 2 FLUTE TiN COATED END MILL W/ 3/16" SHANK
Welcome to ThePlaceToBuy1984! Call Us@ 909-544-8882 The Item You Are Bidding On Is A Solid Carbide End Mill in Good Condition. Item Features& Specifications: Cutting Diameter: 5/32" Shank Diameter: 3/16" Length Of Cut: 9/16" Overall Length: 2" Item Comes Exactly as Shown in Pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive 30% discount per item. This Will be Final on all Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction.
|
|
5/8" Kennametal Solid Carbide TiN Coated 4 Flute End Mill (B 26)
Used Good Condition Kennametal(Lot of 1) 5/8" x 1- 1/4" LOC x 3- 1/2" OAL Solid Carbide 4 Flute TiN Coated End Mill SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other! TX Residents must pay 8.25% Sales Tax.
|
|
New 3/8 carbide END MILL 4 flutes coated (.340)
new 3/8 carbide END MILL 4 flutes coated usa made 4 flute single end diameter-340 shank diameter-3/8 lenght of cut-840 lenght-2.300.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-147cdb2b1ae-0x11a-
|
|
New 1/2 carbide end mill 4 flutes with .060 radius coated
Series VRX EDP# 27761 1/2x3x1-1/4" VRX.020"CR XCEED For stainless steel. Inconel, PH materials, cold rolled steel, titanium, cast iron and tool steels Reduces vibration for more aggressive machining flute dia. +.000-002 shank dia. 0001-0004 corner radius +.001-001 radius tolerance on ball end +.000-001 Edp# Flutes Flute Dia. Flute Length Shank Dia. Neck Dia. 0 4 0.480 1.300 0.5 0.0 Overall Length Reach Length(l.b.s. Neck Length Behind Flutes Corner Radius End Type Flat? 3.0 0.0 0.0 0.06 RAD N
|
|
Tin Coated End Mill Set 10 PCS 4 Flute Drill Bits Cutting Tools 3/16" to 3/4"
This item is a Tin Coated End Mill Set. It includes 10 pieces. 4 flute in size 3/16" to 3/4" and a hinged storage box. The set looks to have had little or no use and is in nice condition.
|
|
NEW DURA MILL 5/8″ TICN COATED SOLID CARBIDE ROUGHING END MILL
here. NEW DURA MILL 5/8″ TICN COATED SOLID CARBIDE ROUGHING END MILL 3 FLUTES 1-5/8″ L.O.C. AC-30625. Overall Length: 3-1/2″ Go to our website: We accept the following payment methods: Visa. Mastercard, American Express& Discover Via Paypal. Please contact us if you have any questions.
|
|
1 LOT(50PCS.) ME 1/2" ROUGHER, PREMIUM COBALT TIALN COATED END MILL (USED)
1 LOT(50PCS. ME 1/2" ROUGHER. PREMIUM COBALT TIALN COATED END MILL. USED)4FLT-1/2X1/2X1-1/4X3-1/4"THESE END MILLS WERE USED IN A CNC MACHINE CUTTING STRESSPROOF. WE REPLACE ONE AFTER 7 PARTS SO THEY HAVE GOOD LIFE TO THEM STILL.NO INTERNATIONAL SALE.PAY BY PAYPAL ONLY WITH IN 72 HOURS OF SALE.WE WILL PACKAGE AND SHIP WITH IN THREE WORKING DAYS AFTER PAYMENT.
|
|