4 Flute Square Center Cutting 2 Flute Center Cutting Square 4 2 Flute Center Cutting 2 4 Flute Square Roughing End Mill Machinist 1 1 4 Flute Lenght 8 Flute Lenght Loc Cobalt Solid Carbide Endmills 1 Hss Double End Mill Fastcut Speed Steel End Mill 4 Flute Lenght Hss Endmills 1 Hss Endmills 3 Solid Carbide Ball Endmills 1 8 Flute Center Cutting Square Hss Corner Rounding Loc 4 Flute Flute Lenght With 1 2 Shank Flute Center Cutting Square End Mill Flute Roughing End Mill Cobalt End Mills 8 Solid Carbide End Mill Flute Square Center Cutting Cobalt Square Center Cutting Cobalt End Mill Single End Mill 1 2 Tialn Coated Solid Carbide Endmills 3 8 Shank Hss End Mill Hanita 1 3/8 Carbide End Mill Radius Corner Rounding Square End Mill 3 Hssco 1 Hssco 1-1 16 Carbide End Mill Tialn 4 Flute Square 2 Flute Center Cutting Carbide Ball End Mill Tin Coated End Mill Solid Carbide End Mill 1 2 2 Flute 3 8 Shank Hss Roughing Cobalt Roughing End Mill Corner Rounding End Mill 1 Cobalt Roughing Endmills Fastcut Tool 4 Flute Double End Mill Roughing Endmills Hss Single End Mill Quinco 1 Solid Carbide End Mill 3 Hss Ball Solid Carbide Endmill Corner Rounding End Mill 4-Flute Solid Carbide End Mill Solid Carbide 4 Flute End Mill Shank 6 Flute Solid Carbide End Mills 1 1 3 4 Loc Roughing End Mill 3 Carbide End Mills 1 2 3 8 Carbide End Mill Tin 4 Flute Ball End Mills 1/2 Ball End Mill Flute End Mill Machinist Weldon Putnam Solid Carbide Endmills 3 Corner Rounding End Mill 3 M42 Cobalt Roughing End Mill Machinist Tools Flute Lenght Inch Single End Style End Mill Corner Radius End Mill Single End Style End Mill Hss Radius 1 1 4 Resharpened Corner Radius Hs Cobalt Endmills 5 Endmills 3 16 Putnam 1 2 Cnc Resharpened End Mill 2 Loc Cobalt Single End Mill 3 7/16 End Mill Mill 7 16 Mill Regrind Carbide End Mills 4 Flute Weldon End Mills Hss Cobalt End Mill Osg 1 Mills Cutter Resharpened Usa Coated Solid Carbide Hanita 1/4 Carbide End Mills Mill Double End 2 Flute 10 Solid Carbide 8 Resharpened Loc Cobalt Roughing End Mill Machinist Cleveland End Mill 2 Flute Single Single End 2 Flute 3 8 Solid Carbide Ball Nose End Mill Hss Endmill Solid Carbide Tialn Hss End Mill 5 32 2 Flute 2 Flt Mills 3 16 4 Flute Endmills Carbide Ball Hss Endmills 5 8 Flute Lenght Endmills W 3 4 Shank 1 2 Resharpened Flute Endmills 8 2 Flute Center Cutting Square 4 Flute Carbide End Mill Flute Corner Niagara Cutter Carbide Ball End Mills Endmills 3 4 4 Flute Double Double Ended 4 Flute Mill 3 32 Mill Counter Coated End Mill Cobalt Hss Radius End Mill Double End Mill 1 3 Resharpened Flute Center Cutting Single End Mill 1 3 4 Loc Endmills 1 4 Mills Bits 8 Loc Putnam End Mill Double End Mill 3 Radius Endmills Indexable Carbide Face Mill Assortment End Mill Corner Rounding 2 Resharpened Rougher End Mill Carbide End Mills 3 Hss Double Hss Co Shank End Mills Mill 1 Resharpened 4 Flt Shank Single Endmills 3 3 16 Carbide Dia Double 6 Flt 64 2 Flute 6 Flute End Mill Flute Single Endmills W 1 Shank 3 8 Shank Hss Data Flute Mill Cutters 3 Center Cutting End Mill Ball Nose Endmills 1 2 1/32 End Mill Flute Length Square End Mills Flute Square Ball Nose End Mills Iscar Mill Carbide Tin Coated Mill 15 16 4 Resharpened Hss Roughing End Mill Regrind 5 16 End Mill 5 Loc Flute Roughing Corner Rounding Endmills Carbide Endmills 4 Flute Cobalt Carbide End Mill 5 Mills 5 8 Cobalt Roughing 6 Flute Center Cutting Niagara Hss Roughing End Mill 1 16 2 Flute Mm Carbide Carbide 3 4 End Mill
 In 
 
Categories
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
5 PCS 3/16" 4 FLUTE CARBIDE END MILL
$
31.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
| | | | | | | High precision solid carbide end mill(s) made from the largest end mill manufacturer in the world! 4 Flutes. Single End 30° RH Spiral, ... morePrecision ground using the highest quality grinding wheels, 7/16" cutting diameter x 7/16" shank diameter x 1" length of cut x 2-3/4" overall length, Cutting Diameter Tolerance: +.0000/ 0012" Shank Diameter Tolerance: +.0000/ 0005" Premium 10% Micrograin Carbide- perfect for your general purpose or difficult application! Need a custom quote on end mills and/or milling holders? Email us for for low pricing! We combine shipping! Complete the buy it now and we'll send you a combined shipping invoice to pay from, Additional quantities. Sizes, coatings, end mill holders, collet chucks, and more great deals on cutting tools available at the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(sa
1/2" 6 FLUTE CARBIDE END MILL -SQUARE END - AlCrN COATED
$
38.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
AlCrN COATED. SQUARE END. High performance endmills at manufacturer direct pricing. 1" LENGTH OF CUT. mills are as good or better at much.
9/32" 4 FLUTE CARBIDE END MILL
$
12.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
2 NEW TITAN 9/32" DIAMETER CARBIDE END MILL. 4 FLUTE. BALL. 5/16" SHANK TITAN# TC 11518 CENTER CUT. MFG 100% MADE IN USA. MICROGRAIN. SE PLEASE ... moreASK ANY QUESTIONS BEFORE BUYING. PLEASE CALL 1-800-999-8952 M&M TOOLS CORP. WHAT IS SHOWN IN MY PICTURE. IS THE ITEM YOU ARE BUYING. SCALE NOT INCLUDED
5 PCS 5/32" 4 FLUTE STUB CARBIDE END MILL
$
33.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
Lot of 5 PCS 5/32" 4 Flute SE Stub. Manufacturer direct pricing. Center Cutting: Yes. Finish: Bright.
1/4" Carbide Endmill 4 Flute SQ TiAlN coated
$
9.85
Buy It Now
Free Shipping
Condition: New
Location: Fort Gratiot, United States
Greetings and thanks for checking out my item! Available here is a single MA Ford endmill. This is a brand new. 4 flute, 1/4" diameter, square end, ... moreTIALN coated, solid carbide, USA Made stub endmill. This retails at MSC Direct for $36.25. I have it available here for 65% off retail. Price is just $12.68 BIN OBO. I will ship these endmills for $2.50. That is a flat rate for endmills below 1/4" I will ship as many endmills as you purchase for that cost. 1 or 20 or more. If you need tracking. Please let me know before I send invoice- it is available by request for an extra dollar. I have pasted details from the MSC Website below. I also have listed a similar MA Ford endmill in 3/16" I DO combine shipping and have MANY other automotive and machining items available. Please check them out! Thanks for looking! MSC Part# 02299725, Big Book Page# Mfr Part# 16325000A, In Stock: 44, Price: $36.25 ea. Quantity: Quantity: TOTAL: $36.25. ADD TO CART Square End Mills | Mill Diameter(Inch) 1/4 | Mill Diameter(Decimal Inch) 0.2500 | Number of Flutes: 4 | Material: Solid Carbide | Length of Cut(Inch) 1/2 | Finish/Coating: TiAlN. Mill Diameter(Inch) 1/4, Mill Diameter(Decimal Inch) 0.2500, Number of Flutes, 4, Material, Solid Carbide, Length of Cut(Inch) 1/2, Finish/Coating, TiAlN, Overall Length(Inch) 2, Single or Double End, Single, Shank Diameter(Inch) 1/4, Flute Type, Spiral, Helix Angle( 30.00, Flute Direction, Right Hand, Centercutting(Yes/No) Yes, Cutting Direction, Right Hand, Extended Reach(Yes/No) No, Chipbreaker(Yes/No) No, Material Grade, Micrograin, Length Type, Stub, Mill Diameter Tolerance(Decimal Inch) +0.000/0.002,
5 PCS 4 FLUTE 1/4 END MILL SOLID CARBIDE TiAlN COATED X 3/4 X 2-1/2 CNC BIT
$
39.99
Buy It Now
Free Shipping
Condition: New
Location: Fremont, United States
| | | | | | | High precision solid carbide end mill(s) made from the largest end mill manufacturer in the world! 4 Flutes. Single End 30° RH Spiral, ... moreTiAlN coated for improved performance and tool life in harder materials or high temperature applications, Precision ground using the highest quality grinding wheels, 3/4" cutting diameter x 3/4" shank diameter x 1-1/2" length of cut x 4" overall length, Cutting Diameter Tolerance: +.0000/ 0012" Shank Diameter Tolerance: +.0000/ 0005" Premium 10% Micrograin Carbide- perfect for your general purpose or difficult application! Need a custom quote on end mills and/or milling holders? Email us for for low pricing! We combine shipping! Complete the buy it now and we'll send you a combined shipping invoice to pay from, Additional quantities. Sizes, coatings, end mill holders, collet chucks, and more great deals on cutting tools available at the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless o
5 PCS 4 FLUTE 1/8 END MILL SOLID CARBIDE TIALN COATED X 1/2 X 1-1/2 CNC BIT
$
22.99
Buy It Now
Free Shipping
Condition: New
Location: Fremont, United States
4 Flutes, Single End 30° RH Spiral, TiAlN coated for improved performance and tool life in harder materials or high temperature applications. We are dedicated ... moreto making your buying experience as smooth and satisfactory as possible.
3/8" Carbide Endmill 4 Flute SQ TiAlN
$
14.90
Buy It Now
Free Shipping
Condition: New
Location: Fort Gratiot, United States
UP FOR AUCTION IS A*BRAND NEW GARR 1/8"x2"x5/8" EXTRA LENGTH 4 FLUTE TIALN COATED SQ. CARBIDE ENDMILL. PLEASE ASK ANY AND ALL QUESTIONS ... moreBEFORE BIDDING AND I WILL ANSWER THEM TO THE BEST OF MY ABILITY. I AM STARTING THIS AUCTION OUT AT $4.00 SO YOU KNOW YOU ARE GETTING THE VERY BEST DEAL POSSIBLE. I WILL BE LISTING MANY OTHER ITEMS SO PLEASE TAKE A MINUTE AND CHECK OUT MY OTHER AUCTIONS. I WILL COMBINE SHIPPING ON MULTIPLE PURCHASES. IF YOU LIVE OUTSIDE OF THE U.S. PLEASE CONTACT ME BEFORE YOU BID BECAUSE THE SHIPPING COST COULD BE HIGHER. I AM SORRY FOR THE INCONVIENCE. BUT I ONLY ACCEPT PAYPAL. THANK YOU FOR LOOKING, GOOD LUCK, AND HAVE A GREAT DAY. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-144869cd289-0xf3-
4 Flute 1/4" x 1-1/2" x 4" Long Solid Carbide End Mill - AlTiN Coated
$
16.99
Buy It Now
Free Shipping
Condition: New
Location: San Diego, United States
Brand New MADE IN THE USA HTC Tool 1/2" x 2" x 4" Solid Carbide 4 Flute ALTIN Coated Fine Pitch Long Roughing End Mill Checkout My Other ... moreSave BIG with Combined Shipping Discounts! TX Residents must pay 8.25% Sales Tax.
NEW 5/16" 4 FLUTE VARIABLE HELIX CARBIDE END MILL - TiAlN COATED USA
$
17.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
TiALN COATED. 5/ 16" 4 FLUTE SE REGULAR. 13/16" LENGTH OF CUT.
1PCS 1/2" 4 Flute 1" LOC Carbide End Mill 3" Overall Length-TiALN COATED New
$
26.49
Buy It Now
Free Shipping
Condition: New
Location: United States
Finish: TiALN. 1/2" 4 Flute SE Regular. Overall Length: 3". Length of Cut: 1". Center Cutting: Yes.
5 Pcs 4 Flute 3/8" Carbide End Mill - Regular Length - Tialn Coated Replace
$
56.89
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
4 Flutes, Single End 30° RH Spiral, TiAlN coated for improved performance and tool life in harder materials or high temperature applications.
2.00mm (.0787") micro two flute endmills, Kyocera Tycom 1600.0787.340
$
4.10
Buy It Now
$4.50 Shipping
Condition: New
Location: Georgetown, United States
These endmills are made by Kyocera Tycom. These tools are normally sold into the printed circuit board market. You'll not find a better endmill at this ... moreprice. The price of the sale is for each individual endmill.
5/8" 6 FLUTE CARBIDE END MILL -SQUARE END - AlCrN COATED
$
64.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
AlCrN COATED. SQUARE END. High performance endmills at manufacturer direct pricing. 1-5/8" LENGTH OF CUT. mills are as good or better at much.
5/8" 4 FLUTE VARIABLE HELIX CARBIDE END MILL - SQUARE END -TiALN COATED
$
55.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
TiALN COATED. VARIABLE HELIX. IRREGULAR FLUTE SPACING. SQUARE END. High performance endmills at manufacturer direct pricing. 1-1/2" LENGTH OF CUT.
5/8" 5 FLUTE CARBIDE END MILL - SQUARE END - AlCrN COATED
$
63.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
AlCrN COATED. SQUARE END. High performance endmills at manufacturer direct pricing. 1-5/8" LENGTH OF CUT.
6pc HSS CNC 4 Flute Spiral Bit End Mill Cutter 1/8 3/16 1/4 5/16 5/8 1/2" in US
$
18.99
Buy It Now
$0.49 Shipping
Condition: New
Location: Rowland Heights, United States
Material: HSS. 4 Flute End Mill Cutter. 6Pcs 4 Flutes End Mill Cutter each size 1pcs. Usage: CNC milling machine. 002 1/4" 20mm 1/4". 001 1/2" 40mm 1/2".
5 PCS 1/8" 4 Flute 1-1/2" Overall Length Ball Nose Carbide End Mill
$
16.42
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Feature: 1/8" 4 FLUTE SE REGULAR BALL NOSE SOLID CARBIDE END MILL TiALN COATED 1/2" LENGTH OF CUT 1-1/2" OVERALL LENGTH 1/8" SHANK DIAMETER Specifications: ... moreMaterial: Solid Carbide Length Of Cut: 1/2 in Cutting Diameter: 1/8 in Shank Diameter: 1/8 in Overall Length: 1-1/2 in Number Of Flutes: 4 Tool Coating: None Condition: New Package List: 5× 1/8" 4 Flute Ball Nose Carbide End Mill.
10 pcs Tin M2 HSS Titanium Coated End Mill Set 4 Flutes Cutting Tools End mill
$
42.99
Buy It Now
Free Shipping
Condition: New
Location: Long Beach, United States
Made of M2 Titanium nitiride-coated high speed steel. These general purpose Four-Flute single end mill are designed for slot, pocket, keyway and profile ... morecutting. Center cutting design allows mills To be used as drills.
4 Flute 1/2" x 2" x 4" Long Solid Carbide End Mill - TiALN Coated
$
29.99
Buy It Now
Free Shipping
Condition: New
Location: United States
| | | | | | | High precision solid carbide end mill(s) made from the largest end mill manufacturer in the world! 4 Flutes. Single End 30° RH Spiral, ... moreTiAlN coated for improved performance and tool life in harder materials or high temperature applications, Precision ground using the highest quality grinding wheels, 1/8" cutting diameter x 1/8" shank diameter x 1/2" length of cut x 1-1/2" overall length, Cutting Diameter Tolerance: +.0000/ 0012" Shank Diameter Tolerance: +.0000/ 0005" Premium 10% Micrograin Carbide- perfect for your general purpose or difficult application! Need a custom quote on end mills and/or milling holders? Email us for for low pricing! We combine shipping! Complete the buy it now and we'll send you a combined shipping invoice to pay from, Additional quantities. Sizes, coatings, end mill holders, collet chucks, and more great deals on cutting tools available at the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless
5 PCS 3/8" 4 FLUTE CARBIDE END MILL - REGULAR LENGTH - TiALN COATED USA
$
60.99
Buy It Now
Free Shipping
Condition: New
Location: United States
3/8" 4 Flute SE Regular. Lot of 5 PCS. Length of Cut: 1". Finish: Bright. Center Cutting: Yes. Overall Length: 2-1/2".
5 Set 3/16" 4 Flute 2" Overall Length Regular Carbide End Mill - TiALN COATED US
$
19.13
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Package Including： Mills 5 Pieces 3/16" Standard Solid Carbide End Mills (As Picture Show, Contact Us If Receive With Missing Parts.) Specification： Item ... moreType:END MILL Flutes:4-Flute Coated:Tialn Coated Cutting Diameter:3/16in. Material:Carbide Helix Angle:30° Helix Shank Diameter:3/16in. Overall Length:2in. End Type:Single End Description： Item location: US fast shipping This product has undergone rigorous quality testing Durable and easy to install and replace The most cost-effective and best after-sales service.
4 Flute 1/2" x 1-1/4" x 3" Solid Carbide Roughing End Mills - TiALN Coated
$
32.45
Buy It Now
Free Shipping
Condition: New
Location: United States
TiALN Coated for improved performance and tool life in harder materials or high temperature applications. 5Pcs 4 Flute 1/ 2 " x 1-1 /4" x 3 " End Mills. ... more1Pcs 4 Flute 1/ 2 " x 1-1 /4" x 3 " End Mills.
1/4", VARIABLE PITCH & HELIX, SQUARE,4 FLUTE CARBIDE END MILL, TiAlN COATED
$
16.00
Buy It Now
Free Shipping
Condition: New
Location: Lagrange, United States
TiAlN COATED. 38º/39º VARIABLE HELIX & PITCH. SQUARE END MILL.
Group of 5-3mm Carbide Endmill 4 Flute Flat Bottom Regular TiAlN
$
19.25
Buy It Now
Free Shipping
Condition: New
Location: Fort Gratiot, United States
TiAlN coated. TiAlN Coated. Flat Bottom. 8mm Length of Cut.
1/2" 4 FLUTE NEW "CGS" 233-1011-164ALTiN CARBINE SQUARE END MILL ALTiN COATED
$
14.50
Buy It Now
Free Shipping
Condition: New
Location: Penitas, United States
1/2" 4 FLUTE NEW "CGS" 233-1011-164ALTiN CARBINE SQUARE END MILL ALTiN COATEDMPN : 233-1011-164Primary Applications: Face Milling,Finish Profiling, Keyway ... moreProduction,Specialty CuttingEnd Type: Square End, Single EndHelix Angle: 30” HelixOverall Length: 3”Material: CarbideCoating: ALTiN/TiAINFlutes: 4-FluteShank Diameter: 1/2”Cutting Diameter: 1/2”
5/16" 3 Flute 37° Helix Carbide End Mill For Aluminum - Square End - ZRN Coated
$
16.99
Buy It Now
Free Shipping
Condition: New
Location: San Diego, United States
ZRN Coated for improved performance and tool life in harder materials or high temperature applications. High Quality ETL/CSA/CE/NSF/FCC - We passed every ... moreevaluation of pool products, even ASTM which for pool alarm in USA laboratory.
5Pcs 4 Flute 1/2" x 1-1/4" x 3" Solid Carbide End Mills AlTiN Coated CNC Bit
$
105.99
Buy It Now
Free Shipping
Condition: New
Location: San Diego, United States
4 Flutes, Single End, Helix Angle: 30°, AlTiN Coated. AlTiN Coated for improved performance and tool life in harder materials or high temperature applications. ... more5Pcs 4 Flute 1/2" x 1-1/4" x 3" End Mills.
5 PCS 5/16" 4 FLUTE CARBIDE END MILL - REGULAR LENGTH - TiALN COATED
$
79.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
Finish: TiALN. Lot of 5 PCS 5/16" 4 Flute SE Regular. Manufacturer direct pricing.
5 PCS 5/64" 4 FLUTE CARBIDE END MILL - TiALN COATED
$
33.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
Finish: TiALN. Lot of 5 PCS 5/64" 4 Flute SE Regular. Manufacturer direct pricing. Length of Cut: 1/4".
5/16" 4 FLUTE LONG CARBIDE END MILL
$
16.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
5/16" 4 FLUTE EXTRA LONG LENGTH CARBIDE END MILL 4" Overall Length 1-5/8" Flute Length Made in USA 170-4312 We will combine items to reduce ... moreyour shipping charges. We will use USPS Flat Rate containers when they will get your goods to you safely and economically. Remember to request a combined invoice at eBay checkout when you have finished selecting your items. Buy 3 or more tools from our eBay Store and your order ships free!
5/16" 3 FLUTE STUB CARBIDE END MILL FOR ALUMINUM - SQUARE END - ZRN COATED
$
22.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
ZRN COATED. STUB LENGTH. 5/16" 3 FLUTE 37° HELIX. using premium 10% cobalt micrograin. SQUARE END. High performance endmills at manufacturer direct pricing.
3/4" Carbide Endmill 4 Flute Variable SQ NuCra Coated
$
58.54
Buy It Now
Free Shipping
Condition: New
Location: Fort Gratiot, United States
TECHMILL 3/4" ENDMILL 4 FLUTE WITH NuCra. NuCra coating. In addition, with our NuCra coating for milling in harder tool and alloy steels. Variable pitched ... morecutting edges. 1-1/2’’ length of cut. Unequal index.
Group of 5 -5mm Carbide Endmill 4 Flute Flat Bottom Regular TiAlN
$
29.68
Buy It Now
Free Shipping
Condition: New
Location: Fort Gratiot, United States
TiAlN coated. Flat Bottom. 13mm Length of Cut. Center Cutting.
1/2" 5 FLUTE VARIABLE HELIX CARBIDE END MILL .015 RADIUS nACo COATED CNC TOOL
$
35.00
Buy It Now
Free Shipping
Condition: New
Location: Fond Du Lac, United States
Coating : nACo. Radius(R) :0.015. Number Of Flutes : 5. HARDENED STEEL.
(5) 0.50mm (.0197") 2 FLUTE MICRO CARBIDE ENDMILLS Kyocera 1600.0197.079
$
21.25
Buy It Now
$4.50 Shipping
Condition: New
Location: Georgetown, United States
These endmills are made by Kyocera Tycom. These tools are normally sold into the printed circuit board market and are made in the USA. The price of the ... moresale is for 5 endmills. You'll not find a better endmill at this price.
(2) KENNAMETAL 1/2 INCH 6 FLUTE ENDMILL CARBIDE USED
$
32.50
Buy It Now
$5.90 Shipping
Condition: Used
Location: Oklahoma City, United States
This listing is for a set of (2) KENNAMETAL solid carbide endmills with a shank diameter of 1/2 inch and a mill diameter of 1/2 inch. These endmills are ... moreperfect for finishing work and are in used condition. The number of flutes on each endmill is 6, ensuring a smooth and efficient milling process. These endmills are ideal for those in the CNC, metalworking, and manufacturing industries, as well as for those in need of metalworking supplies. They are made of high-quality solid carbide material, ensuring durability and longevity. Please note that these endmills are in used condition and may show signs of wear, but they are still fully functional and ready for use.
Kennametal 5/8" Carbide Endmill Coolant Thru 5 Flute ACDD0625N5CCC (LOC2840A)
$
80.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
MPN: ACDD0625N5CCC. Coolant Through: Yes. Grade: K600.
5 PCS 1/16" 4 FLUTE CARBIDE END MILL
$
26.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
| | | | | | | High precision solid carbide end mill(s) made from the largest end mill manufacturer in the world! 4 Flutes. Single End 30° RH Spiral, ... moreTiAlN coated for improved performance and tool life in harder materials or high temperature applications, Precision ground using the highest quality grinding wheels, 5/16" cutting diameter x 5/16" shank diameter x 13/16" length of cut x 2-1/2" overall length, Cutting Diameter Tolerance: +.0000/ 0012" Shank Diameter Tolerance: +.0000/ 0005" Premium 10% Micrograin Carbide- perfect for your general purpose or difficult application! Need a custom quote on end mills and/or milling holders? Email us for for low pricing! We combine shipping! Complete the buy it now and we'll send you a combined shipping invoice to pay from, Additional quantities. Sizes, coatings, end mill holders, collet chucks, and more great deals on cutting tools available at the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Un
5 PCS 1/16" 2 FLUTE CARBIDE END MILL
$
24.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
| | | | | | | High precision solid carbide end mill(s) made from the largest end mill manufacturer in the world! 4 Flutes. Single End 30° RH Spiral, ... moreTiAlN coated for improved performance and tool life in harder materials or high temperature applications, Precision ground using the highest quality grinding wheels, 5/16" cutting diameter x 5/16" shank diameter x 13/16" length of cut x 2-1/2" overall length, Cutting Diameter Tolerance: +.0000/ 0012" Shank Diameter Tolerance: +.0000/ 0005" Premium 10% Micrograin Carbide- perfect for your general purpose or difficult application! Need a custom quote on end mills and/or milling holders? Email us for for low pricing! We combine shipping! Complete the buy it now and we'll send you a combined shipping invoice to pay from, Additional quantities. Sizes, coatings, end mill holders, collet chucks, and more great deals on cutting tools available at the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Un
1/2" Extra Long Carbide Endmills 4 Flute USA Made
$
40.00
Buy It Now
$5.00 Shipping
Condition: Seller refurbished
Location: Troy, United States
R.C.T. LLC. USA CARBIDE*BRAND NEW* TOOLS YG1 GENERIC EXTRA LONG-SAME TOOLS AS IN PICTURE- SHANK DIA. 1/2 or.500 CUTTING DIA. 1/2 or.500 LENGHT OF CUT- ... more1 1/4 or 1.250 OVER ALL LENGHT- 3 1/2" NUMBER OF FLUTES- 4- ECCENTRIC GROUND OD END CUT STYLE- CENTER CUTTING FLAT WITH DISH COATING- TIALN NUMBER OF TOOLS= 5 SHIPPING $5.10 FLAT RATE SHIPPING U.S. BUYERS ONLY
1 PCS 4 FLUTE 3/16 END MILL SOLID CARBIDE TIALN COATED X 5/8 X 2 CNC BIT
$
12.99
Buy It Now
Free Shipping
Condition: New
Location: Fremont, United States
4 Flutes, Single End 30° RH Spiral, TiAlN coated for improved performance and tool life in harder materials or high temperature applications. We are dedicated ... moreto making your buying experience as smooth and satisfactory as possible.
5 Pcs 1/4" 4 Flute 2-1/2" Overall Length Regular Carbide End Mill - TiALN COATED
$
36.46
Buy It Now
Free Shipping
Condition: New
Location: United States
Finish: TiALN. 1/4" 4 Flute SE Regular. Lot of 5 PCS. Overall Length: 2-1/2". Length of Cut: 3/4". Center Cutting: Yes.
3/8" End Mill Solid Carbide 4 Flute Chip Breakers
$
18.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Madison Heights, United States
New, overstock. 3/8" cutting diameter 3/8" shank diameter 4 flute, center cutting Coated 2-1/2" Overall Length 1" Length of Cut Chip breakers, finishing ... moreendmil. Corner chamfer approx .010" Solid Carbide.
NEW Widia/ Hantia 1/2” 6 Flute Endmills
$
45.00
Buy It Now
$10.00 Shipping
Condition: New
Location: Troy, United States
HIGH Quality ENDMILLS. You won’t be able to find these or similar for my price. PRICE IS PER.
12mm Carbide Endmill 4 Flute Flat Bottom Regular TiAlN Classic Series
$
16.50
Buy It Now
Free Shipping
Condition: New
Location: Fort Gratiot, United States
TiAlN coated. TiAlN Coated. Flat Bottom. Center Cutting.
(10) - #73 (.0240") 2 FLUTE MICRO CARBIDE ENDMILLS - LONG FLUTE 1600.0240.120B1
$
42.00
Buy It Now
$4.50 Shipping
Condition: New
Location: Georgetown, United States
These endmills are made by Kyocera Tycom.This tool was designed to have alonger flute (.120")for deep reach applications in wood and plastic. The price ... moreof the sale is 10 endmills. part number: 1600.0240.120B1.
1/16" (.0625") CARBIDE END MILL 2 FLUTE LONG .500" FLUTE 1600.0625.500 (PACK 5)
$
22.75
Buy It Now
$4.50 Shipping
Condition: New
Location: Georgetown, United States
This is a new too, with a really long flute for this size. Use them for depth reach or long flute type milling. You'll not find a better endmill at this ... moreprice. length of cut. part number: 1600.0625.500A1.
(5) 1/16" (.0625") CARBIDE 2 FLUTE ENDMILLS, DOWNCUT PLASTIC WOOD 1650.0625.250
$
24.00
Buy It Now
$4.50 Shipping
Condition: New
Location: Georgetown, United States
They are right hand turn, left hand helix, downcut design. These endmills are made by Kyocera.Each endmill has a plastic ring for quick tool change and ... moretool identification. These endmills are ideal for milling soft plastics to prevent the burr at the top of the cut.
3/8" Carbide Endmill 4 Flute Flat Bottom Long TiAlN Classic Series
$
22.80
Buy It Now
Free Shipping
Condition: New
Location: Fort Gratiot, United States
3/8'’ SQ ENDMILL 4 FLUTE WITH TiAlN COATING. 2’’ length of cut.
1/2" x 1/2" 4 FOUR FLUTE M2AL ROUGHING END MILL M2-AL MILLING NEW !}
$
8.00
Buy It Now
$6.70 Shipping
Condition: New
Location: Saint Charles, United States
Specially formulated M2 steel with aluminum alloy. FLUTE LENGTH 1-1/4. END MILL CATEGORY Roughers. You may ask for freight cost before buying tools. FINISH ... moreCOATINGUncoated. END SHAPESquare End. at Fixed Prices.
5PCS 1/2" 4 Flute 1" LOC Carbide End Mill 3" Overall Length-TiALN COATED New
$
105.99
Buy It Now
Free Shipping
Condition: New
Location: United States
Finish: TiALN. 1/2" 4 Flute SE Regular. Overall Length: 3". Length of Cut: 1". Center Cutting: Yes.
8 Set End Mill 4 Flute Milling Cutter HSS Straight Shank Drill Bit 1/16"-1/2''
$
17.99
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Specifcaition: Type:4 Flute End Mill Meterial: High Speed Steel Note: Please allow 1-3mm errors due to manual measurement. Due to the difference between ... moredifferent monitors, the picture may not reflect the actual color of the item. Package Including: 1set HSS End Mill.
1/2" 3 FLUTE 37° HELIX CARBIDE END MILL FOR ALUMINUM SQUARE END ZRN COATED
$
21.69
Buy It Now
Free Shipping
Condition: New
Location: Austell, United States
ZRN Coated. 1/2" 3 Flute 37° Helix. Helix Angle: 37° HELIX. End Mill Type: Single Mill. We are professional and responsible, and we are always available ... moreto assist you when you encounter problems. Length Of Cut: 1-1/4"(Due to the production batch factor, the product is engraved with 1-1/8, and the LOC is actually 1-1/4).
5PCS 1/4'' HSS Straight Shank Spiral 4 Flute End Mill Cutter CNC Drill Bit Tool
$
11.59
Buy It Now
Free Shipping
Condition: New
Location: El Monte, United States
Material: HSS. Helix angle: 30 Helix. 5Pc 4 Flutes End Mill Cutter. Inner Arc Design - long lasting,excellent wear resistance, increased lubricity and ... morefaster rate. Usage: CNC milling machine. Excellent work piece ,Dubbed Corners, high efficency.
3 Flute Carbide 3/8"x1-1/2"x3-1/2" End Mill 45° Helix For Aluminum - ZRN Coated
$
23.99
Buy It Now
Free Shipping
Condition: New
Location: San Diego, United States
ZRN Coated for improved performance and tool life in harder materials or high temperature applications. 3 flute and 45-degree helix allow harmonic balance ... moreat high speed condition and smooth cutting.
Solid Carbide End Mill 2 Flute EM2-0500 1/2" New Fast Free Shipping MADE IN USA
$
30.95
Buy It Now
Free Shipping
Condition: New
Location: Morrow, United States
Length of Flute: 1″. Micrograin single end right hand spiral.
Quantity 5 - 5/16" 4 Flute Carbide End Mill - Regular Length - Tialn Coated USA
$
49.95
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
TiALN COATED. 5/16" 4 FLUTE SE REGULAR. Warm reminder 13/16" LENGTH OF CUT.
5 PCS 3/8" 4 FLUTE CARBIDE END MILL - REGULAR LENGTH - TiALN COATED
$
129.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
Finish: TiALN. Lot of 5 PCS 3/8" 4 Flute SE Regular. Manufacturer direct pricing.
5 PCS 1/2" 4 FLUTE CARBIDE END MILL - REGULAR LENGTH - TiALN COATED
$
149.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
Finish: TiALN. Lot of 5 PCS 1/2" 4 Flute SE Regular. Manufacturer direct pricing.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
2 NIAGARA SOLID CARBIDE ENDMILLS 4 FLUTE 1/2" TIALN Coated SR420 ROUGH 76186 USA
Greetings and thanks for checking out my auction! Available here is a lot of 2 Niagara Cutter ½” carbide endmills including a rough endmill. Model#76186 and a finish endmill- 85688. Together these 2 endmills would cost $147.67 at MSC Direct’s WEB SALE price. I am listing these as used. But I will say they look brand new and unused to me. The finish endmill has a flat ground on it(see photo) that is not factory. The tubes weren’t sealed, so I can’t promise they are new, so to be safe I am listing them as used. I pasted all of the details from the MSC Direct website below– between the pics and this info. ALL of your questions should be answered… Due to the fact that I can’t guarantee these as NEW, I will make this an auction so the bidders can set the price. Bidding begins at just 99 cents. These will ship together in a small flat rate ... morepriority mailer for the actual cost- $5.80. MSC# 65085375 Product Details Mill Diameter 1/2 Material Solid Carbide Pitch Fine Length of Cut 5/8 Finish/Coating TiAlN Overall Length 2-1/2 End Type Corner Chamfer Number of Flutes 4 Centercutting(Yes/No) Yes Shank Diameter 1/2 Helix Angle( 20.00 Extended Reach(Yes/No) No Chamfer Width(Decimal Inch) 0.0250 Single or Double End Single Cutting Direction Right Hand Flute Direction Right Hand Mill Diameter Tolerance(Decimal Inch) +0.000/0.003 Shank Diameter Tolerance(Decimal Inch) 0.0001/0.0004 Overall Length Tolerance(Decimal Inch) +0.060/0.060 Brand: Niagara Cutter Mfr Part# 76186 Big Book: 657 Order Qty of 1 =(1) Piece Exact What is this? Min Qty: 1 Web Price: $100.78 ea. Price: $118.57 ea. Top of Form Quantity: ADD TO CART Bottom of Form Add to My List In Stock: 152 MSC# 36703700 Product Details Mill Diameter 1/2 Mill Diameter 0.5000 Number of Flutes 4 Material Solid Carbide Length of Cut 5/8 Length of Cut 0.6250 Finish/Coating TiAlN Overall Length 2-1/2 Overall Length 2.5000 Single or Double End Single Shank Diameter 1/2 Shank Diameter 0.5000 Flute Type Spiral Helix Angle( 30.00 Flute Direction Right Hand
GARR tool 3/4" 4 flute carbide endmills
http:www.garrtool.com/product.1 Posted with
2 NEW! GARR SOLID CARBIDE TIALN COATED 4-FLUTE ENDMILLS - 1/2" - #230MA (13317)
aims 2 NEW! GARR SOLID CARBIDE TIALN COATED 4-FLUTE ENDMILLS- 1/2" 230MA(13317) read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Garr Tool. These are 2 NEW Solid Carbide TIALN Coated Endmills. Model# 230MA(13317) Features: Gives maximum production rates in a wide range of materials. Allows faster speeds and feeds than uncoated. Offers the optimum in heat and abrasion resistance. An excellent solution for dry machining. High transverse rupture strength. Made from premium submicron grain carbide. Center Cutting. Specifications: Diameters: 1/2" Shanks: 1/2" Flutes: 4. Lengths of Cut: 1" Overall Lengths: 3" Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. ... moreReliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 2 NEW! GARR SOLID CARBIDE TIALN COATED 4-FLUTE ENDMILLS- 1/2" 230MA(13317) Reliable Tool Inc. c 2011 | Powered by
64 1/2 inch 5 flute helical carbide endmills
64 1/2 inch 5 flute helical carbide endmills data flute no reserve Posted with
5 DATA FLUTE SOLID CARBIDE 2 & 3-FLUTE ENDMILLS - 7/16" & 1/2"
aims 5 DATA FLUTE SOLID CARBIDE 2& 3-FLUTE ENDMILLS- 7/16" 1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Data Flute. These are 5 Solid Carbide Endmills in good condition. Part#s: 4) SSLSM30437C11& HSML20500 Specifications: Cutting Diameters: 4) 7/16" 1/2" Flutes: 2& 4) 3. Shank Diameters: 4) 7/16" 1/2" Lengths of Cut: 4) 9/16" 5/8" Overall Lengths: 6" Comes as shown in pictures. ... moreTo go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 5 DATA FLUTE SOLID CARBIDE 2& 3-FLUTE ENDMILLS- 7/16" 1/2" Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ea12810c8-0x102-
10 solid carbide 1/2" resharpened endmills.4 flute.3 extras with buy it now.
1/2" 4 flute. will combine shipping. 3 extras with buy it now only.
(2) 2 1/2"x 12" square end 6 flute HSS endmills used, 2 1/2" dia. shanks 16"OAL
2) 2 1/2"x 12" square end 6 flute endmills used. 2 1/2" dia. shanks 16"OAL(1) has chip at end of cutter.4b]
SOLID CARBIDE ENDMILLS LOT 3&4 Flute 2 pcs.mixed sizes Newly resharpened
We deal mainly in pre-owned items. As a result and for that reason. They are USED(except if otherwise noted) Since the nature of pre-owned items is that there is always some normal aging and wear. You should assume that to be the case in our auctions. We are not experts in every field and it is the Buyers responsibility to ascertain the value of the item. So if additional information is required. Please contact us well in advance of the auction's conclusion with any questions prior to bidding by using eBay's messaging system.clicking on the"Ask seller a question" above. We will answer your questions promptly. We do not deliberately misrepresent our items and always attempt to thoroughly and accurately describe each item to the best of our capability. Still. We are human and subject to error. Consequently, something may slip ... morepast us. To prevent misconceptions about our items. We provide large photos for viewing in case we missed something. Picture: DESCRIPTION: Up for auction are 2 SOLID Carbide Endmills one is a 3 Flute Data Flute 3/8" Endmill and the other one is a 1/2" 4 Flute Endmill. These both have been professionally resharpened and are ready to work for you. Take a look at pics and then bid! Good Luck bidding! We are not expert appraisers and the grading method is not intended to be authoritative or all-inclusive. But only a subjective guide. Our opinion of"Mint. Near-Mint, Excellent, Very Good, Good, Fair, Poor" may vastly differ from yours. CONDITION: EXCELLENT Newly resharpened Once you are notified by email that you are the winner of the auction. You can arrange payment via PayPal. We accept e-check and credit card payments through PayPal. All payments must be made in US dollars. Full payment must be received within three(3) days of the auction's ending. Non-Payment/ Non-Contact A winning bid is a binding contract. All transactions not completed within five(5) days of the auction’s closing date will be cancelled and an unpaid item dispute report will be issued
SIX SGS & GARR 2 FLUTE 5/8" L.O.C. SOLID CARBIDE ENDMILLS
Search Titles and Descriptions Categories Policies Gallery SIX SGS& GARR 2 FLUTE 5/8" L.O.C. SOLID CARBIDE ENDMILLS SIX SGS& GARR 2 FLUTE 5/8" L.O.C. SOLID CARBIDE ENDMILLS SIX SGS& GARR 2 FLUTE 5/8" L.O.C. SOLID CARBIDE ENDMILLS Specifications Size: 1/2" Shank: 1/2" Length of Cut: 1-1/4" Flutes: 2. Overall Lengths: 3" Lot comes as shown. Copyright c 2012 Bid On Industrial. Powered by
MICRO-CARBIDE - .098" TWO FLUTE ENDMILLS - LOT OF 10 W/.125" SHAFTS AND COLLARS
This is a lot of ten cutters 2.5MM/ 098" These bits have a.125" shaft and depth index collars set to provide easy tool change while insuring consistant tool depth. These bits are all inspected under power to insure flutes and points are not damaged. Bits are packaged in 10 count carriers. Please let me know if other sizes are desired. We probably have stock for those as well. See my other items as well.
NICE! 6 SOLID CARBIDE 4-FLUTE SINGLE END ENDMILLS 1/2"
aims NICE! 6 SOLID CARBIDE 4-FLUTE SINGLE END ENDMILLS 1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 6 Solid Carbide 4-Flute Single End Endmills NEW! Specifications: Diameters: 1/2" Length of cuts: 1" Overall lengths: 3" Lot has 4 flute geometry. Comes as shown in pictures. Check out the photos and if you can't find what your looking for or have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! 6 SOLID CARBIDE 4-FLUTE SINGLE END ENDMILLS 1/2" Reliable Tool Inc. c 2011 | Powered by
9 solid carbide 5 @ 1/2" & 4 @ 7/16 resharpened endmills.2 flute.
will combine shipping.
USED 6 ATRAX A9404536 1/2X1/2" 4 FLUTE S/CAR X-LONG SEM ENDMILLS
USED ATRAX A9404536 1/2X1/2" 4 FLUTE S/CAR X-LONG SEM END MILL SHIPPING INFORMATION: Shipping Weight: 3 LB. Shipping from San Bernardino. Ca 92407 Handling Fee: $2.00 per package SIGNATURE AT DELIVERY IS REQUIRED FOR ALL PACKAGES! SHIPPING ADDRESS NEEDS TO BE PAYPAL VERIFIED We only ship within the United States. We ONLY use UPS& US POSTAL for all our shipping needs. Please call us to get a shipping + packaging charges before bidding/finalizing your transaction. BID w/ CONFIDENCE& GOOD LUCK! Questions:Use"Ask Seller a Question" Link PAYMENT INSTRUCTIONS: All payments must be received within 5 business days of auction end. If there has been no contact/payment from the buyer within 7 days after the auction ends. NPB will be filed and the item will be re-listed. Buyers are responsible for paying Sales Tax if in California ... moreCUSTOMER SERVICE: We do our best to present accurate information about every item we sell. If you have any questions. Use the"Ask Seller a Question" Link before placing your bid. RETURNS: We offer a 14 day return policy for this item from the time of delivery. After 14 days no refunds and returns will be accepted. Buyers will pay for return shipping to our location. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f5b181e03-0xfa-
USED! 4 DATA FLUTE & OTHER SOLID CARBIDE BALL ENDMILLS - 1/2"
aims USED! 4 DATA FLUTE& OTHER SOLID CARBIDE BALL ENDMILLS- 1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Data Flute& other manufacturers. These are 4 Solid Carbide Ball Endmills in AS-IS condition. Endmills need to be resharpened. Specifications: Sizes: 1/2" Shank Sizes: 1/2" Lengths of Cut: 1" Overall Lengths: 3" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. USED! 4 DATA FLUTE& OTHER SOLID CARBIDE BALL ENDMILLS- 1/2" Reliable Tool Inc. c 2011 | Powered ... moreby
(10) 1/2" Solid Carbide Endmills Variety Ball 4 flute Resharpened AS IS L2075
I have for auction(10) pieces 1/2" Solid Carbide Endmills Have been resharpened. And may have some chips. Sold AS IS(1) 4" overall length, 2" flute, 4 flute Ball Nosed(3) 3 1/2" overall length, 1 1/2" flute, 4 flute center cut(1) 4" overall length, 2" flute, 2 flute, not sure it is carbide, heavy but a different color(1) 4" overall length, 2" flute, 4 flute center cut, chamfered edges(1) 3" overall length, 1 1/2" flute, 4 flute center cut(3) 3 1/2" overall length, 2" flute, 4 flute center cut $8.75 flat rate shipping, to 48 states.
USED! 5 DATA FLUTE CNC SOLID CARBIDE ENDMILLS - 1/4"
aims USED! 5 DATA FLUTE CNC SOLID CARBIDE ENDMILLS- 1/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Data Flute CNC. These are 5 Solid Carbide Endmills in AS-IS condition. Endmills need to be resharpened. Specifications: Sizes: 1/4" Shank Sizes: 1/4" Lengths of Cut: 3/8" Flutes: 2. Overall Lengths: 4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. USED! 5 DATA FLUTE CNC SOLID CARBIDE ENDMILLS- 1/4" Reliable Tool Inc. c 2011 | Powered by
USED! 7 DATA FLUTE CNC & OTHER SOLID CARBIDE ENDMILLS - .467" to .687"
aims USED! 7 DATA FLUTE CNC& OTHER SOLID CARBIDE ENDMILLS- 467" to.687" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Data Flute CNC& other manufacturers. These are 7 Solid Carbide Endmills in AS-IS condition. Endmills need to be resharpened. Specifications: Sizes Range: 467" to.687" Shank Sizes: 500" to.687" Overall Lengths Range: 3" to 4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. USED! 7 DATA FLUTE CNC& OTHER SOLID CARBIDE ENDMILLS- 467" ... moreto.687" Reliable Tool Inc. c 2011 | Powered by
USED! 3 DATA FLUTE CNC SOLID CARBIDE ENDMILLS - 7/16"
aims USED! 3 DATA FLUTE CNC SOLID CARBIDE ENDMILLS- 7/16" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Data Flute CNC. These are 3 Solid Carbide Endmills in AS-IS condition. Endmills need to be resharpened. Specifications: Sizes: 7/16" Shank Sizes: 7/16" Lengths of Cut: 9/16" Flutes: 3. Overall Lengths: 6" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. USED! 3 DATA FLUTE CNC SOLID CARBIDE ENDMILLS- 7/16" Reliable Tool Inc. c 2011 | Powered by
2 1.0 2 FLUTE ENDMILLS
These endmills are from my fathers machine shop which closed about 30 yrs ago.Thanks for looking The flute length is 3.0 with.187 radius ALL HAVE BEEN RESHARPENED AND ARE U/S
NEW! LOT OF 7 NATIONAL 3/4" HELEX BALL ENDMILLS 4-FLUTE
aims NEW! LOT OF 7 NATIONAL 3/4" HELEX BALL ENDMILLS 4-FLUTE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by National Twist Drill. This is a Lot of 7 Precision Helex Ball Endmills in Good condition. Specifications: Cutting Diameters: 3/4" Length of Cut: 1-3/4" Overall Length: 4" Endmills have 4-flute geometry. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NEW! LOT OF 7 NATIONAL 3/4" HELEX BALL ENDMILLS 4-FLUTE Reliable Tool Inc. c 2011 | Powered by
2 OSG 1" Diameter 4 Flute HSS-Co Endmills with 3/4" shank, FREE SHIPPING!!!
Clearing Out Surplus Tooling! Up for auction is this lot of 2 used OSG end mills. Specs are as follows: Cutter type: M42 high speed steel(8% Cobalt) Cutter diameter: 1" Cutter height: 1.85" Flutes: 4 Shank diameter: 3/4" 0.75" Overall length: 4.15" Made of high speed steel. Their combination of 4 flutes, large cutter diameter, and smaller collet-ready shank make them an ideal choice for your milling applications. These endmills are used, but in good condition with no major chips or broken flutes. Still plenty sharp and ready for use! I bought them as part of a large auction lot and am selling off the extras(I wish I could keep them all, but there's only so much room in the drawers) Save big, shipping is free! Good luck and happy bidding! Additional information: Payment is due within 3 business days of close of ... moreauction; Paypal only. Please. Item will ship within 3 business days of receipt of payment. There is no return policy; all items are sold as-is, as shown in the pictures.
1/2 4 FLUTE END MILL ALL CENTER CUTTING ENDMILLS LOT x 10 REGROUND
Shipped with protective coating still in place as seen in the picture are these( 10) resharpened 1/2 diameter 4 flute solid carbide end mills. NOTE: THESE ARE RESHARPENED 1/2 ENDMILLS AND ACTUAL CUTTING DIAMETER IS NOT KNOW for all of them SINCE PROTECTIVE COATING IS STILL IN PLACE. I removed coating on five end mills and they checked around.488. 489, 490, 491 and.493, the coating has been put back on for shipping* These end mills measure about 3 inch overall with.920 to.950 inch of cutting flute. Re Sharpened condition with no chips or usage. Shipped by US Postal service as soon as payment is received. Be sure to check out my other toolng items listed*
NICE!! PAIR OF PRECISION 2" HSS 8-FLUTE ENDMILLS
aims NICE! PAIR OF PRECISION 2" HSS 8-FLUTE ENDMILLS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a pair of 8-Flute HSS Endmills in Good condition. Specifications: Diameter: 2" Flute Length: 4" OAL: 6-1/2" Lot has 8 flute geometry. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! PAIR OF PRECISION 2" HSS 8-FLUTE ENDMILLS Reliable Tool Inc. c 2011 | Powered by
TWO REGAL / MG 2-FLUTE HSS ENDMILLS - 1-1/4" & 1-1/2"
aims TWO REGAL/ MG 2-FLUTE HSS ENDMILLS- 1-1/4" 1-1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Regal& MG. These are 2 Endmills HSS in good condition. Specifications: Cutting Diameter: 1-1/4" 1-1/2" Shank Size: 1-1/4" L.O.C. 6-1/4" 8-1/4" O.A.L. 8-3/4" 10-1/2" Flute Geometry: 2. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. TWO REGAL/ MG 2-FLUTE HSS ENDMILLS- 1-1/4" 1-1/2" Reliable Tool Inc. c 2011 | Powered by
USED! 7 DATA FLUTE SOLID CARBIDE 3 FLUTE ENDMILLS - 19/64" TO 21/64"
aims USED! 7 DATA FLUTE SOLID CARBIDE 3 FLUTE ENDMILLS- 19/64" TO 21/64" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Data Flute. These are 7 Solid Carbide Endmills in good condition. Specifications: Sizes Range: 19/64" to 21/64" Shank Sizes: 3/8" Lengths of Cut: 5/8" Overall Lengths Range: 4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. USED! 7 DATA FLUTE SOLID CARBIDE 3 FLUTE ENDMILLS- 19/64" TO 21/64" Reliable Tool Inc. c 2011 | Powered by
3 Data Flute 1/2" endmills - TiAlN coated
This auction is for 3 Data flute 1/2" 4 flute carbide endmills with TiAlN coating. They have been factory resharpened once and still have cutting diameter of.490"+ They also have a factory supplied endmill flat on the shank. Data Flute#SS40500 Thanks for looking and good luck!
6 CLEVELAND HSS DOUBLE SIDED 2 FLUTE 1/2" ENDMILLS
aims 6 CLEVELAND HSS DOUBLE SIDED 2 FLUTE 1/2" ENDMILLS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Cleveland. These are 6 HSS Endmills in GREAT condition. Specifications: Size Range: 1/2" Shanks Range: 1/2" Flutes: 2. Overall Lengths Range: 4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 6 CLEVELAND HSS DOUBLE SIDED 2 FLUTE 1/2" ENDMILLS Reliable Tool Inc. c 2011 | Powered by
7 .350 & .274" SOLID CARBIDE TiN COATED 4-FLUTE ENDMILLS
aims 7.350& 274" SOLID CARBIDE TiN COATED 4-FLUTE ENDMILLS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are Solid Carbide Tin Coated 4-Flute Endmills in GREAT condition. Specifications: Cutting Diameters: 350& 274" Shank Diameters: 5/16& 3/8" Lengths of Cut: 2-1/2" Flutes: 4. Overall Lengths: 4-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 7.350& 274" SOLID CARBIDE TiN COATED 4-FLUTE ENDMILLS Reliable Tool Inc. c 2011 | Powered by
NICE!! 10 PRECISION SOLID CARBIDE 4 FLUTE ENDMILLS W/ RADIUS 5/16" DIAMETERS
aims NICE! 10 PRECISION SOLID CARBIDE 4 FLUTE ENDMILLS W/ RADIUS 5/16" DIAMETERS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 10 Solid Carbide Endmills in Great Condition. Specifications: Diameter: 5/16" Shanks: Straight. Length of Cut: 7/8" Overall Length: 2-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! 10 PRECISION SOLID CARBIDE 4 FLUTE ENDMILLS W/ RADIUS 5/16" DIAMETERS Reliable Tool Inc. c 2011 | Powered by
(3) 3/8" SOLID CARBIDE 4-FLUTE BALL NOSE ENDMILLS
aims(3) 3/8" SOLID CARBIDE 4-FLUTE BALL NOSE ENDMILLS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 3 Solid Carbide 4-Flute Endmills. Specifications: Cutting Diameters: 3/8" Shanks: 3/8" Lengths of Cut: 3/4" Flutes: 4 Overall Lengths: 3" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 3) 3/8" SOLID CARBIDE 4-FLUTE BALL NOSE ENDMILLS Reliable Tool Inc. c 2011 | Powered by
Accupro Square Endmill 1x1x2x4-1/2 4 Flute Machinist Endmills Cutting Tools
Accupro Square Endmill 1x1x2x4-1/2 4 Flute Machinist Endmills Cutting Tools This Endmill appears to be in Like New condition- apparently the supplier's overstock. It was acquired in"as is" condition and are being sold the same"as is" see pictures for details. You are buying this item exactly as shown in the pictures. You will receive One Accupro Endmill for the price shown. Below are the product details as shown on the supplier's website for this particular model number. They are here for informational purposes only to show the specifications of this item in Brand New condition. Again. The item you are buying is being sold AS SHOWN IN PICTURES. Supplier's list price New $142.00 Product Specifications: Mill Diameter(Inch) 1 Number of Flutes 4 Material Powdered Metal Length of Cut(Inch) 2 Finish/Coating Uncoated ... moreOverall Length(Inch) 4-1/2 Shank Diameter(Inch) 1 Centercutting(Yes/No) Yes Chipbreaker(Yes/No) No* Please ask questions prior to making a bid Local Pickup is always an option- If you would like to pickup your item locally- send a request at the end of the auction and ask to be invoiced for local pickup. Seller will ship item within 1 days of Auction Close and provide Buyer with a confirmation of shipping. FEEDBACK: If you are unhappy for any reason. Please contact us prior to leaving any neutral or negative feedback. We strive for 100% customer satisfaction and hope you will give us the opportunity to correct any potential problems. We leave positive feedback for all customers who have completed a successful transaction with us. Returns are accepted for refund within 14 days. Buyer is responsible for return shipping costs and must contact seller prior to returning item. Returned items must be received by Seller in same condition as they were shipped in prior to refund being issued. NOTE: All item(s) being sold are in"as is" condition and exactly as shown in the pictures. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listi
Putnam Ball Endmill Cobalt 1" X1" 2" Cutting 4 Flute Machinist Tools Endmills
Putnam Ball Endmill Cobalt 1" X1" 2" Cutting 4 Flute Machinist Tools Endmills This Putnam Ball Endmill appears to be in Like New condition- apparently the supplier's overstock. It was acquired in"as is" condition and are being sold the same"as is" see pictures for details. You are buying this item exactly as shown in the pictures. You will receive One Putnam Ball Endmill for the price shown. Below are the product details as shown on the supplier's website for this particular model number. They are here for informational purposes only to show the specifications of this item in Brand New condition. Again. The item you are buying is being sold AS SHOWN IN PICTURES. Supplier's List price: $163.28 Number of Flutes 4 Overall Length 4 1/2" Shank Length 1" Mill Diameter 1" Length of Cut ... more2" Material Grade Material Finish Coating M42 Cobalt Uncoated* Please ask questions prior to making a bid* Free Shipping Local Pickup is always an option- If you would like to pickup your item locally- send a request at the end of the auction and ask to be invoiced for local pickup. Seller will ship item within 1 days of Auction Close and provide Buyer with a confirmation of shipping. FEEDBACK: If you are unhappy for any reason. Please contact us prior to leaving any neutral or negative feedback. We strive for 100% customer satisfaction and hope you will give us the opportunity to correct any potential problems. We leave positive feedback for all customers who have completed a successful transaction with us. Returns are accepted for refund within 14 days. Buyer is responsible for return shipping costs and must contact seller prior to returning item. Returned items must be received by Seller in same condition as they were shipped in prior to refund being issued. NOTE: All item(s) being sold are in"as is" condition and exactly as shown in the pictures. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps,
2 RESHARPENED NIAGARA ROUGHING ENDMILLS. 3/4" SHANK. 4 FLUTE. HS COBALT. C643
2 RESHARPENED NIAGARA ROUGHING ENDMILLS. 3/4" SHANK. 4 FLUTE. HS COBALT. LENGTH OF CUT: 2" CATALOG NUMBER: 45437 CHECK OUT MY GREAT FEEDBACK ON ALL MY TOOLING. Be sure to add me to your! WHAT IS SHOWN IN MY PICTURE IS THE ITEM YOU ARE BUYING. Check out my! ANY QUESTIONS PLEASE ASK BEFORE BUYING. EMAIL OR CALL 1-800-999-8952 M&M TOOLS CORP. We are a family owned business and we operate on the honor system. For any reason you have a problem with any of our tooling. Please email us, contact us through eBay, or call us anytime 1-440-897-7919. We take care of our customers to the best of our abilities. We describe our tooling as it is, we do not hide anything. Please don't hesitate to ask us any questions before purchasing. Thanks M&M Tools Corp.
3 RESHARPENED NIAGARA ROUGHING ENDMILLS. 5/8" SHANK. 4 FLUTE. HS COBALT. C642
3 RESHARPENED NIAGARA ROUGHING ENDMILLS. 5/8" SHANK. 4 FLUTE. HS COBALT. LENGTH OF CUT: 1-3/4" CATALOG NUMBER: 71203 CHECK OUT MY GREAT FEEDBACK ON ALL MY TOOLING. Be sure to add me to your! WHAT IS SHOWN IN MY PICTURE IS THE ITEM YOU ARE BUYING. Check out my! ANY QUESTIONS PLEASE ASK BEFORE BUYING. EMAIL OR CALL 1-800-999-8952 M&M TOOLS CORP. We are a family owned business and we operate on the honor system. For any reason you have a problem with any of our tooling. Please email us, contact us through eBay, or call us anytime 1-440-897-7919. We take care of our customers to the best of our abilities. We describe our tooling as it is, we do not hide anything. Please don't hesitate to ask us any questions before purchasing. Thanks M&M Tools Corp. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-141bd2e6466-0xfa-
3 RESHARPENED OSG ROUGHING ENDMILLS. 5/8" SHANK. 4 FLUTE. HS COBALT. {C640}
3 RESHARPENED OSG ROUGHING ENDMILLS. 5/8" SHANK. 4 FLUTE. HS COBALT. LENGTH OF CUT: 1-5/8" CATALOG NUMBER: 47005 CHECK OUT MY GREAT FEEDBACK ON ALL MY TOOLING. Be sure to add me to your! WHAT IS SHOWN IN MY PICTURE IS THE ITEM YOU ARE BUYING. Check out my! ANY QUESTIONS PLEASE ASK BEFORE BUYING. EMAIL OR CALL 1-800-999-8952 M&M TOOLS CORP. We are a family owned business and we operate on the honor system. For any reason you have a problem with any of our tooling. Please email us, contact us through eBay, or call us anytime 1-440-897-7919. We take care of our customers to the best of our abilities. We describe our tooling as it is, we do not hide anything. Please don't hesitate to ask us any questions before purchasing. Thanks M&M Tools Corp.
3 PRECISION HSS 4-FLUTE ENDMILLS - 39/64" DIAMETERS
aims 3 PRECISION HSS 4-FLUTE ENDMILLS- 39/64" DIAMETERS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 3 HSS Endmills in Good Condition. Specifications: Cutting Diameter: 39/64" Shanks: Straight. Length of Cut: 4" Overall Length: 6-5/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 3 PRECISION HSS 4-FLUTE ENDMILLS- 39/64" DIAMETERS Reliable Tool Inc. c 2011 | Powered by
12 ASSORTED SOLID CARBIDE 6 FLUTE ENDMILLS 1/8"
aims 12 ASSORTED SOLID CARBIDE 6 FLUTE ENDMILLS 1/8" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 12 Solid Carbide Endmills in good condition. Specifications: Cutting Diameter Range: 1/8" Shank Diameters: 1/8" Length of Cut Range: 1/4" Flutes: 6. Overall Length Range: 1-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 12 ASSORTED SOLID CARBIDE 6 FLUTE ENDMILLS 1/8" Reliable Tool Inc. c 2011 | Powered by
12 ASSORTED SOLID CARBIDE 4 FLUTE ENDMILLS 7/64" & 1/8"
aims 12 ASSORTED SOLID CARBIDE 4 FLUTE ENDMILLS 7/64" 1/8" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 12 Solid Carbide Endmills in good condition. Specifications: Cutting Diameter Range: 7/64" to 1/8" Shank Diameters: 1/8" Length of Cut Range: 1/8" to 1/4" Flutes: 4. Overall Length Range: 1" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 12 ASSORTED SOLID CARBIDE 4 FLUTE ENDMILLS 7/64" 1/8" Reliable Tool Inc. c 2011 | Powered by
NICE USED! 2 PRECISION 1/2" SOLID CARBIDE 5-FLUTE ENDMILLS
2 usable solid carbide endmills 5 flute made in the USA. 1/2x1/2x2x4.
10 PRECISION 4-FLUTE HSS ENDMILLS - 3/16" & 1/4" DIAMETERS
aims 10 PRECISION 4-FLUTE HSS ENDMILLS- 3/16" 1/4" DIAMETERS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are HSS Endmills in Good Condition. Specifications: Cutting Diameters: 6)3/16" 4)1/4" Length of Cut: 7/8" to 1-3/4" Shanks: 3/8" Overall Length: 2-3/4" to 3-5/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 10 PRECISION 4-FLUTE HSS ENDMILLS- 3/16" 1/4" DIAMETERS Reliable Tool Inc. c 2011 | Powered by
U.S.A.!! 3 PRECISION 4-FLUTE HSS RADIUS ENDMILLS - 5/8" DIAMETERS
aims U.S.A. 3 PRECISION 4-FLUTE HSS RADIUS ENDMILLS- 5/8" DIAMETERS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are HSS Endmills in GREAT Condition. Specifications: Cutting Diameters: 5/8" Length of Cut: 2-1/2" Shanks: Straight. Overall Length: 4-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A. 3 PRECISION 4-FLUTE HSS RADIUS ENDMILLS- 5/8" DIAMETERS Reliable Tool Inc. c 2011 | Powered by
(50) 0.80mm (.0315") 2 FLUTE MICRO CARBIDE ENDMILLS USED
THESE ARE USED BUT STILL VERY SHARP. OFTEN FLEXIBLE PCB FABRICATERS USE THESE FOR LESS THAN 3 LINEAR FEET AND CHANGE TOOLS, THE MATERIALS AND THE PRICE OF THE PRODUCT THAT THEY TOOL DICTATE THIS OVERKILL. THESE ARE STILL INCREADIBLY SHARP. THEY ARE CLEANED IN AN ULTRASONIC BATH WITH SPECIAL FLUID, INSPECTED AND PACKAGED IN QUANTITIES OF 50: 2 FLUTE.0315" DIAMETER. 1/8" SHAFT DIAMETER. 1 1/2" OVERALL LENGTH 2ND KIT IS 1/2 PRICE- THAT IS JUST $60 FOR 100 OF THESE PRECISION MADE TOOLS. NO BETTER VALUE AROUND! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-143d233416e-0xf3-
Hanita Endmill Cobalt 3/4x3/4x3/4x2-7/8 3 Flute Machinist Endmills Cutting Tools
Hanita Endmill Cobalt 3/4x3/4x3/4x2-7/8 3 Flute Machinist Endmills Cutting Tools This Hanita Endmill appears to be in Like New condition- apparently the supplier's overstock. It was acquired in"as is" condition and are being sold the same"as is" see pictures for details. You are buying this item exactly as shown in the pictures. You will receive One Hanita Endmill for the price shown. Below are the product details as shown on the supplier's website for this particular model number. They are here for informational purposes only to show the specifications of this item in Brand New condition. Again. The item you are buying is being sold AS SHOWN IN PICTURES. Supplier's List price: $79.45 Roughing Finishing- Single End Mills Type: Roughing& Finishing Size: 3/4 Shank Diameter: 3/4 Length of Cut: 3/4 Overall ... moreLength: 2-7/8 Number of Flutes: 3 Material: Cobalt- M-42 Number of Flutes 3 Overall Length 2 7/8" Shank Diameter 3/4" Length of Cut 3/4" Length of Cut 2" Material Grade Material M42 Cobalt* Please ask questions prior to making a bid* Free Shipping Local Pickup is always an option- If you would like to pickup your item locally- send a request at the end of the auction and ask to be invoiced for local pickup. Seller will ship item within 1 days of Auction Close and provide Buyer with a confirmation of shipping. FEEDBACK: If you are unhappy for any reason. Please contact us prior to leaving any neutral or negative feedback. We strive for 100% customer satisfaction and hope you will give us the opportunity to correct any potential problems. We leave positive feedback for all customers who have completed a successful transaction with us. Returns are accepted for refund within 14 days. Buyer is responsible for return shipping costs and must contact seller prior to returning item. Returned items must be received by Seller in same condition as they were shipped in prior to refund being issued. NOTE: All item(s) being sold are in"as is" condition and exactly
5/16 Straight Two Flute Endmills Niagara 17 29101 one lot of 4 pcs.
Endmills came out of shop that closed down selling as used but they look unused have been in draw for sometime. Check out other items in my store. Will combine items to save on shipping. Shipping out of the US will cost more.
NICE USED! PRECISION 3/16 thru 1/2 SOLID CARBIDE 2-5 FLUTE ENDMILLS - Lot #2
This is Lot#2 42 usable solid carbide and hardend endmills. You will find a mixed variety here of cutters. Some barely used while others may have good use but still have great cutting ahead of them. I did my best to makes sure all flutes on the cutters were present but there maybe one I missed but I just needed to alert you just incase. I included at least one champher cutter in each lot. see pics for more info. I have another lot up also- Lot#1 see my other listings if interested? I will combine shipping if you are high bidder on both lots. see our feedback and you will notice that everyone who has purchased our used endmills is very pleased. buy with confindence and thanks for looking.
NICE USED! PRECISION 3/16 thru 1/2 SOLID CARBIDE 2-6 FLUTE ENDMILLS - Lot #1
This is Lot#1 46 usable solid carbide and hardend endmills. You will find a mixed variety here of cutters. Some barely used while others may have good use but still have great cutting ahead of them. I did my best to makes sure all flutes on the cutters were present but there maybe one I missed but I just needed to alert you just incase. I included at least one champher cutter in each lot. see pics for more info. I have another lot up also- Lot#2 see my other listings if interested? I will combine shipping if you are high bidder on both lots. see our feedback and you will notice that everyone who has purchased our used endmills is very pleased. buy with confindence and thanks for looking.
3 PCT 2" COBALT 8-FLUTE ENDMILLS w/ 1-1/4" SHANKS
Made by PCT. These are 3 Used Endmills. Specifications: Cutting Diameters: 2" Lengths of Cut: 2" Shanks: 1-1/4" Flutes: 8 Overall Lengths: 4-1/2" Comes exactly as shown in pictures. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-144db1cdbf8-0x10b-
3 COBALT 6-FLUTE ROUGHING ENDMILLS w/ 1-1/4" SHANKS - (2) 1-1/4" & 1-3/8"
These are 3 Used Roughing Endmills. Specifications: Cutting Diameters: 2) 1-1/4" 1-3/8" Lengths of Cut: 2" 2-1/2" 3-1/4" Shanks: 1-1/4" Flutes: 6 Overall Lengths: 4-1/2" 4-7/8" 5-1/2" Comes exactly as shown in pictures.
(4) PRECISION HSS ENDMILLS 1" 2-FLUTE NICE!!
This is a lot of used Endmills in good condition. Specifications: Cutting Sizes Range:1" Shank Sizes Range: 1" Lengths of Cut Range: 2" Overall Lengths Range: 4" Comes as shown in pictures. Check out the photos! If you have any other questions. Give us a email. We currently have a large selection of products listed, please check out our other auctions for more great Deals!
4 Sharpened 1' endmills 4 flute double end
4 sharpened 1" shank endmills sizes from.9 to.99 4 flute double end
(2) 3D TOOL 15/32" SOLID CARBIDE 3-FLUTE BALLNOSE ENDMILLS
Made by 3D Tool. These are 2 used Solid Carbide Ballnose Endmills. SPECIFICATIONS: Cutting Diameters: 15/32" Shank Diameters: 1/2" Lengths of Cut: 1" Overall Lengths: 5-1/2" Comes exactly as shown in pictures.
EXCELLENT LOT of 17 assorted ENDMILLS - Double/Single End, 2 Flute/4 Flute
Lot of 17 assorted ENDMILLS. All in good used condition. Some are in very good condition. Either new or used very little. Some have been resharpened and/or had tips modified and used very little or none. Some will definitely need sharpening. None are rusty. Though a few may have a small spot here and there. Saved by machinists because they were deemed still usable. I will describe below what I can determine as far as size. Manufacture and condition. See pictures. Sold as is. 3 packaged. See pictures: 1) Quincy HS 1/8"x3/16" DE 2 flutes. Looks to have had sharpened/modified tip. Looks otherwise unused/new. 1) Niagra HSS 7/32"x3/8" SE 4 flutes. Looks to have had sharpened/modified tip. Looks otherwise unused/new. 1) Quinco HS 13/32" DE 2 flutes. Looks like one end sharpened/modified tip. Looks otherwise unused/new. ... more1) un-named 3/4" CARBIDE-EDGED SE 2 flutes. Good shape. Needs some sharpening. See picture. Rest of lot. In order of quality: 1) Weldon H61-HS 7/32" DE 4 flutes. Looks new. 1) Melin 1/4" DE 4 flutes. Looks new. 1) Dapra Super Mill Diamond Lapped 3/4" Reads DE but single-ended. 4 flutes. Waxed(sharpened? 1) Weldon HSS 1/4" DE 4 flutes. Looks lightly used. 1) Besly 5/8" DE 2 flutes. Looks lightly used. 1) Standard Tool Co. HS 5/8 SE 2 flutes. Looks sharpened. 1) P&W HS 1/2" SE 2 flutes. Moderately used. 1) Un-named.788 etched in. SE 4 flutes. Looks sharpened/modified. The rest have more wear and have modified tips: 1) Melin HSS 7/16" DE 2 flutes(1) Weldon HSS 1/2" DE 2 flutes(1) Standard Tool Co. HS 1/4" DE 2 flutes(1) un-named HS 1/2" SE 2 flutes(1) un-named HS 1/4" SE 2 flutes New to eBay. Thank you for your consideration. Please see my other listings for more machine tools. Paypal only. Please. Ships to U.S.
5- 3/4" double end endmills 1-1/4" length of cut 2 flute reconditioned tools
5 quility endmills reconditioned 3/4" 2 flute double end 1-1/4" length of cut
3 HERTEL 9/64" SOLID CARBIDE 2-FLUTE BALL NOSE ENDMILLS
Made by Hertel. These are 3 used Solid Carbide Endmills in good condition. SPECIFICATIONS: Cutting Diameters: 9/64" Shank Diameters: 3/16" Lengths of Cut: 9/16" Overall Lengths: 2" Comes exactly as shown in pictures.
7 PCS 1/2"-11/16" CUT HSS ENDMILLS 2-3-4 FLUTE ROUGHERS & FINISHERS BRIDGEPORT
LOT OF 7 PCS HSS END MILLS 1/2" 5/8" SHANKS. 1/2" 11/16" CUT, MOST ARE USA MADE, NIAGARA, MORSE, OTHERS, A FEW ARE IN LIKE NEW CONDITION& VERY SHARP, PLEASE CHECK ALL PICS CHECK MY OTHER ADS FOR MORE TOOLING. I DO HAVE MORE TO LIST YET ALSO, THANKS SALES& SHIPPING TO USA ONLY PAYMENT DUE IN 24 HRS& I WILL SHIP BY NEXT DAY. THANKS I WILL COMBINE SHIPPING WITH OTHER ORDERS SO WAIT FOR AN INVOICE OR USE SHOPPING CART ON MORE THAN ONE ITEM. THANKS
2 FLUTE ENDMILLS 5/16 - 1" (LOT OF 4) #52770
2 FLUTE ENDMILLS 5/16- 1" NEED SHARPENING LOT OF 4 ITEMS ARE USED AND NEED SHARPENING WE DO OFFER COMBINED SHIPPING PLEASE WAIT FOR AN INVOICE ON MULTIPLE PURCHASES
FIVE 1/2" COBALT 4-FLUTE ROUGHING ENDMILLS
These are 5 used Cobalt Roughing Endmills in good condition. SPECIFICATIONS: Cutting Diameters: 1/2" Shank Diameters: 1/2" Lengths of Cut: 1-3/8" Overall Lengths: 3-3/8" Comes exactly as shown in pictures.
12 pc 3/8 Solid Carbide Endmills 2/4 flute center cut 375 used resharpened L2125
12) pcs 3/8" Solid Carbide Endmills. 4 flute center cut, have been resharpened, they are used, may have some chips. 9) 2-1/2" overall length, 1" flute length.1) 3" overall length, 1-1/4" flute length.1) 2-1/2" overall length, 1" flute length, this is only a 2-flute. Most are Garr. Please e-mail me if you have any questions. Flat rate shipping. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-145506253fc-0x10f-
8 1/2" Solid Carbide Endmills 4 flute center cut .500" used resharpened L2123
8) pcs 1/2" Solid Carbide Endmills. 4 flute center cut. Have been resharpened, they are used, may have some chips. 1) is 2-3/4" overall length, 1" flute length. 6) are 3" overall length, 1-1/4" flute length.1) is 2-3/4" overall length, 1-1/4" flute length.Most are Garr. Please e-mail me if you have any questions. Flat rate shipping.
2 ISCAR 5/8" SOLID CARBIDE 4-FLUTE ENDMILLS
Made by Iscar. These are 2 used Solid Carbide Endmills. SPECIFICATIONS: Cutting Diameters: 5/8" Shank Diameters: 5/8" Lengths of Cut: 1-1/4" Overall Lengths: 4" Comes exactly as shown in pictures.
(10) .045" 2 FLUTE MICRO CARBIDE ENDMILLS US Union Tool
These are lightly used. Precision miniature end mills. The application and expense of the work piece that these are used for(mil spec printed circuit board and flexible circuit board milling) require tool changes well before these mills are dull or chipped. Extremely sharp so be careful. Don't worry though they are tough, made from a single piece of solid, Tungsten Carbide. You'll receive 10 of these Used 1.15mm(045" diameter. Two-flute, solid carbide end mills made in the USA by US Union Tool. These end mills have a razor sharp pair of flutes that are flat or"square bottom" Can be used for flat bottom milling as well as intricate profile milling. Flute Diameter- 1.15mm(045" Shaft Diameter- 1/8" Flute Length- 120" Flutes- Two
(10) 1.60mm (.063") 2 FLUTE MICRO CARBIDE ENDMILLS US Union Tool
When taking advantage of the 1/2 off second kit. Buy first kit at full price and then make an offer for one kit at $7.50 within an hour and I'll accept that offer. That is just $22.45 + shipping for 20 precision 2 flute end mills. These are lightly used. Precision miniature end mills. The application and expense of the work piece that these are used for(mil spec printed circuit board and flexible circuit board milling) require tool changes well before these mills are dull or chipped. Extremely sharp so be careful. Don't worry though they are tough, made from a single piece of solid, Tungsten Carbide. You'll receive 10 of these Used 1.60mm(063" diameter. Two-flute, solid carbide end mills made in the USA by US Union Tool. These end mills have a razor sharp pair of flutes that are flat or"square bottom" Can be used ... morefor flat bottom milling as well as intricate profile milling. Flute Diameter- 1.60mm(063" Shaft Diameter- 1/8" Flute Length- 200" Flutes- Two
SIX 1/2" SOLID CARBIDE 2-FLUTE ENDMILLS
These are 6 used Solid Carbide Endmills. SPECIFICATIONS: Cutting Diameters: 1/2" Shank Diameters: 1/2" Lengths of Cut: 1/2" 3/4" 1" Overall Length Range: 2-3/8" to 3" Comes exactly as shown in pictures.
Endmills Over 45 Pieces 1" X 1" X 2" 4-1/2- 2 Flute Excellent-lot- f-1 U.S.A
Lot F1 Used Endmills Over 45 Pieces 1" X 1" X 2"4-1/2 2 Flute Excellent Condition U S A*EXCELLENT CONDITION* Lot of Over 45 Pieces of Used End Mills 1 X 1 X 2. Brands may include Brubaker. Regal Beloit, International, Fastcut, PCT, Niagra, etc. Size Range: 1" 2 Flute Mostly Brubaker and Regal Beloit. High Speed and Cobalt Mostly Cobalt Mostly Full Size American Made Please ask any questions before bidding. We ship immediately after payment has been received. International Bidders Please Contact Me For Shipping Rates We will be listing HUNDREDS of End Mills in the coming weeks, please check back often. Thank you for looking.
NICE USED! 20 PRECISION 5/16 & 1/4" SOLID CARBIDE 4-FLUTE ENDMILLS
20 usable solid carbide endmills 4 flute made in the USA You are going to recieve(10) 5/16 x 1/2 x 2 and(10) 1/4 x1/2 x 2 for a total of 20 cutters. see our feedback and you will notice that everyone who has purchased our used endmills is very pleased. buy with confindence and thanks for looking.
4 M.A. FORD 1/2" SOLID CARBIDE 3-FLUTE ENDMILLS
Made by M.A. Ford. These are 4 used Solid Carbide Endmills. SPECIFICATIONS: Cutting Diameters: 1/2" Shank Diameters: 1/2" Lengths of Cut: 1-1/4" Overall Lengths: 3" Comes exactly as shown in pictures.
2 FULLERTON 5/8" SOLID CARBIDE 4-FLUTE ENDMILLS
Made by Fullerton. These are 2 used Solid Carbide Endmills. SPECIFICATIONS: Cutting Diameters: 5/8" Shank Diameters: 5/8" Lengths of Cut: 3/4" Overall Lengths: 6" Comes exactly as shown in pictures.
8 HELICAL 1/4" SOLID CARBIDE ZrN COATED 3-FLUTE ENDMILLS
Made by Helical. These are 8 used Solid Carbide Endmills. SPECIFICATIONS: Cutting Diameters: 1/4" Shank Diameters: 1/4" Lengths of Cut: 3/4" Overall Lengths: 2-1/2" Comes exactly as shown in pictures.
Putnam Endmill Cobalt 1 1/2" x 1-1/4" Cutting 6 Flute Machinist Tools Endmills
Putnam Endmill Cobalt 1 1/2" x 1-1/4" Cutting 6 Flute Machinist Tools Endmills Below is information as shown on supplier's site- placed here for informational purposes. Square End Mills | Mill Diameter(Inch) 1-1/2 | 96080. Mill Diameter(Decimal Inch) 1.5000 | Number of Flutes: 6 | Material: Cobalt | Length of Cut(Inch) 4 | Length of Cut(Decimal Inch) 4.0000. Supplier list price $225 new This Endmill is in like NEW Condition-apparently the supplier's overstock. You are buying this item exactly as shown in the pictures. You will receive One Putnam Endmill for the price shown- if you would like more than one- please send message to seller prior to paying for purchase. Please ask questions prior to making a bid* Free Shipping- ships by USPS Payment is expected within 48 hours of auction close- Please contact seller if more time ... moreis needed. Local Pickup is always an option- If you would like to pickup your item locally- send a request at the end of the auction and ask to be invoiced for local pickup. Seller will ship item within 1 days of Auction Close and provide Buyer with a confirmation of shipping. FEEDBACK: If you are unhappy for any reason. Please contact us prior to leaving any neutral or negative feedback. We strive for 100% customer satisfaction and hope you will give us the opportunity to correct any potential problems. We leave positive feedback for all customers who have completed a successful transaction with us. Returns are accepted for refund within 14 days. Buyer is responsible for return shipping costs and must contact seller prior to returning item. Returned items must be received by Seller in same condition as they were shipped in prior to refund being issued. NOTE: All item(s) being sold are in"as is" condition and exactly as shown in the pictures.
4 GARR 3/8" SOLID CARBIDE 4-FLUTE ENDMILLS
Made by Garr Tool. These are 4 used Solid Carbide Endmills. SPECIFICATIONS: Cutting Diameters: 3/8" Shank Diameters: 3/8" Lengths of Cut: 1" Overall Lengths: 2-1/2" Comes exactly as shown in pictures.
ISCAR Endmill 5 Flute EC-E5L 10-25C10CF72 Machinist Tools Endmills Machining Met
ISCAR Endmill 5 Flute EC-E5L 10-25C10CF72 Machinist Tools Endmills Machining Metalworking Metals- FREE Shipping! This ISCAR Endmill appears to be in Like New condition- apparently the supplier's overstock. It was acquired in"as is" condition and are being sold the same"as is" see pictures for details. You are buying this item exactly as shown in the pictures. You will receive One ISCAR Endmill for the price shown. Below are the product details as shown on the supplier's website for this particular model number. They are here for informational purposes only to show the specifications of this item in Brand New condition. Again. The item you are buying is being sold AS SHOWN IN PICTURES. 5 flute. 38° helix with variable pitch for roughing and finishing operations. High material removal rates chatter free. Used ... morefor machining alloyed and stainless steel, titanium and exotic materials. Full slot milling- up to 1XD. Designation: EC-E5L 10-25C10CF72* Please ask questions prior to making a bid* Free Shipping Payment is expected within 48 hours of Auction Close- Contact seller if more time is needed! Local Pickup is always an option- If you would like to pickup your item locally- send a request at the end of the auction and ask to be invoiced for local pickup. Seller will ship item within 1 days of Auction Close and provide Buyer with a confirmation of shipping. FEEDBACK: If you are unhappy for any reason. Please contact us prior to leaving any neutral or negative feedback. We strive for 100% customer satisfaction and hope you will give us the opportunity to correct any potential problems. We leave positive feedback for all customers who have completed a successful transaction with us. Returns are accepted for refund within 14 days. Buyer is responsible for return shipping costs and must contact seller prior to returning item. Returned items must be received by Seller in same condition as they were shipped in prior to refund being issued. NOTE: All item(s) being sold are in"as is"
PAIR OF 1/2" DATA FLUTE CNC CARBIDE ROUGHING ENDMILLS
PAIR OF 1/2" DATA FLUTE CNC CARBIDE ROUGHING ENDMILLS Size:1/2" LOC: 1- 1 1/4" Flutes: 3& 4* Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-145932f4727-0x10a-
7/32" DATA FLUTE CNC CARBIDE ENDMILLS 5 FLUTE
7/32" DATA FLUTE CNC CARBIDE ENDMILLS 5 FLUTE Size: 7/32" Shank: 1/4" LOC: 1/2- 1 1/4" Flutes: 5* Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days*
LOTof20 4 Flute Carbide Endmills End mill Cutting Tools Ballnose Hanita Varimill
Check out my! I have up for grabs this LOT of( 20) USED but Re-Sharpened Carbide End mills. I found these in a storage locker. I took then to a local machine shop and they sharpened them and the following is what they have told me about these. 1) 4 flute 1/2" shank.72" cutting length.488" cutting Dia. 2.737" Overall length. 1) 4 flute 1/2" shank.775" Cutting length.486" Cutting Dia. 2.843" overall length. 1) 4 flute 1/2" shank 1.82" cutting length.483" cutting Dia. 4.875" overall. 1) 4 flute 1/2" shank 1.56" cutting length.486" cutting Dia. 4.624" overall. 1) 4 flute 1/2" shank 2" cutting length.473" cutting Dia. 5.094" overall. 1) 4 flute 1/2" shank 1.7" cutting length.442" cutting Dia. 4.14" overall. 1) 4 flute 1/2" ... moreshank.915" cutting length.482" cutting Dia. 2.954" overall. 1) 4 flute 1/2" shank.87" cutting length.474" cutting Dia. 2.938 overall. 1) 4 flute 1/2" shank.915" cutting length.485" cutting Dia. 2.982" overall: 1.18" of shank is 1/2" the rest is undercut to.482" up to the cutting length. 1) 4 flute 1/2" shank 1.86" cutting length.451" cutting Dia. 3.846 overall; 925" of shank is 1/2" the rest is undercut to.468" up to the cutting length. 1) 4 flute 14mm shank 1.18" cutting length.538" cutting Dia. 3.455" overall. 1) 4 flute 1/2" shank.7" cutting length.475" cutting Dia. 2.63" overall; Hanita Varimill. 1) 4 flute 5/8" shank 1.045" cutting length.599" cutting Dia. 3.225" overall; Hanita Varimill; 1.13" of shank is 5/8" the rest is undercut to.598" up to the cutting length. 1) 4 flute 1/2" shank 1.110" cutting length.498" cutting Dia. 5.580" overall; ball only. Flute NOT sharpened, may have small chips on flute. 1) 4 flute 1/2" shank.950" cutting length.498" cutting Dia. 2.85" ov
FIVE 1/2" SOLID CARBIDE 3-FLUTE ENDMILLS
These are 5 used Solid Carbide Endmills. SPECIFICATIONS: Cutting Diameters: 1/2" Shank Diameters: 1/2" Lengths of Cut: 3/8" 1/2" 5/8" Overall Lengths: 2-3/8" 2-1/2" Comes exactly as shown in pictures. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-145b4efc7c1-0x10e-
7 undersized 1" 2 flute sharpened endmills 1-3/4" cutting length
7 decent 1" sharpened endmills 2 flute 1-3/4" cutting length great for roughing prior to using your exact 1" bits sizes vary the smallest 1/16" under.
3 RESHARPENED NIAGARA ROUGHING ENDMILLS. 5/8" SHANK. 4 FLUTE. HS COBALT. {E225}
3 RESHARPENED NIAGARA ROUGHING END MILLS. 5/8" SHANK. 4 FLUTE. HS COBALT. M42. MADE IN USA. CHECK OUT MY GREAT FEEDBACK ON ALL MY TOOLING. Be sure to add me to your! WHAT IS SHOWN IN MY PICTURE IS THE ITEM YOU ARE BUYING. Check out my! ANY QUESTIONS PLEASE ASK BEFORE BUYING. EMAIL OR CALL 1-800-999-8952 M&M TOOLS CORP. We are a family owned business and we operate on the honor system. For any reason you have a problem with any of our tooling. Please email us, contact us through eBay, or call us anytime 1-440-897-7919. We take care of our customers to the best of our abilities. We describe our tooling as it is, we do not hide anything. Please don't hesitate to ask us any questions before purchasing. Thanks M&M Tools Corp.
4 RESHARPENED NIAGARA ROUGHING ENDMILLS. 1/2" SHANK. 4 FLUTE. HS COBALT. {E217}
4 RESHARPENED NIAGARA ROUGHING END MILLS. 1/2" SHANK. 4 FLUTE. HS COBALT. COATED CHECK OUT MY GREAT FEEDBACK ON ALL MY TOOLING. Be sure to add me to your! WHAT IS SHOWN IN MY PICTURE IS THE ITEM YOU ARE BUYING. Check out my! ANY QUESTIONS PLEASE ASK BEFORE BUYING. EMAIL OR CALL 1-800-999-8952 M&M TOOLS CORP. We are a family owned business and we operate on the honor system. For any reason you have a problem with any of our tooling. Please email us, contact us through eBay, or call us anytime 1-440-897-7919. We take care of our customers to the best of our abilities. We describe our tooling as it is, we do not hide anything. Please don't hesitate to ask us any questions before purchasing. Thanks M&M Tools Corp.
2 RESHARPENED NIAGARA ROUGHING ENDMILLS. 3/4" SHANK. 4 FLUTE. HS COBALT. {E234}
2 RESHARPENED NIAGARA ROUGHING END MILLS. 3/4" SHANK. 4 FLUTE. HS COBALT. CHECK OUT MY GREAT FEEDBACK ON ALL MY TOOLING. Be sure to add me to your! WHAT IS SHOWN IN MY PICTURE IS THE ITEM YOU ARE BUYING. Check out my! ANY QUESTIONS PLEASE ASK BEFORE BUYING. EMAIL OR CALL 1-800-999-8952 M&M TOOLS CORP. We are a family owned business and we operate on the honor system. For any reason you have a problem with any of our tooling. Please email us, contact us through eBay, or call us anytime 1-440-897-7919. We take care of our customers to the best of our abilities. We describe our tooling as it is, we do not hide anything. Please don't hesitate to ask us any questions before purchasing. Thanks M&M Tools Corp.
Help