4 Flute Square Center Cutting 2 Flute Center Cutting Square 4 2 Flute Center Cutting 2 4 Flute Square Roughing End Mill Machinist 1 1 4 Flute Lenght 8 Flute Lenght Loc Cobalt Solid Carbide Endmills 1 Hss Double End Mill Fastcut Speed Steel End Mill 4 Flute Lenght Hss Endmills 1 Hss Endmills 3 Solid Carbide Ball Endmills 1 8 Flute Center Cutting Square Hss Corner Rounding Loc 4 Flute Flute Lenght With 1 2 Shank Flute Center Cutting Square End Mill Flute Roughing End Mill Cobalt End Mills 8 Solid Carbide End Mill Flute Square Center Cutting Cobalt Square Center Cutting Cobalt End Mill Single End Mill 1 2 Tialn Coated Solid Carbide Endmills 3 8 Shank Hss End Mill Hanita 1 3/8 Carbide End Mill Radius Corner Rounding Square End Mill 3 Hssco 1 Hssco 1-1 16 Carbide End Mill Tialn 4 Flute Square 2 Flute Center Cutting Carbide Ball End Mill Tin Coated End Mill Solid Carbide End Mill 1 2 2 Flute 3 8 Shank Hss Roughing Cobalt Roughing End Mill Corner Rounding End Mill 1 Cobalt Roughing Endmills Fastcut Tool 4 Flute Double End Mill Roughing Endmills Hss Single End Mill Quinco 1 Solid Carbide End Mill 3 Hss Ball Solid Carbide Endmill Corner Rounding End Mill 4-Flute Solid Carbide End Mill Solid Carbide 4 Flute End Mill Shank 6 Flute Solid Carbide End Mills 1 1 3 4 Loc Roughing End Mill 3 Carbide End Mills 1 2 3 8 Carbide End Mill Tin 4 Flute Ball End Mills 1/2 Ball End Mill Flute End Mill Machinist Weldon Putnam Solid Carbide Endmills 3 Corner Rounding End Mill 3 M42 Cobalt Roughing End Mill Machinist Tools Flute Lenght Inch Single End Style End Mill Corner Radius End Mill Single End Style End Mill Hss Radius 1 1 4 Resharpened Corner Radius Hs Cobalt Endmills 5 Endmills 3 16 Putnam 1 2 Cnc Resharpened End Mill 2 Loc Cobalt Single End Mill 3 7/16 End Mill Mill 7 16 Mill Regrind Carbide End Mills 4 Flute Weldon End Mills Hss Cobalt End Mill Osg 1 Mills Cutter Resharpened Usa Coated Solid Carbide Hanita 1/4 Carbide End Mills Mill Double End 2 Flute 10 Solid Carbide 8 Resharpened Loc Cobalt Roughing End Mill Machinist Cleveland End Mill 2 Flute Single Single End 2 Flute 3 8 Solid Carbide Ball Nose End Mill Hss Endmill Solid Carbide Tialn Hss End Mill 5 32 2 Flute 2 Flt Mills 3 16 4 Flute Endmills Carbide Ball Hss Endmills 5 8 Flute Lenght Endmills W 3 4 Shank 1 2 Resharpened Flute Endmills 8 2 Flute Center Cutting Square 4 Flute Carbide End Mill Flute Corner Niagara Cutter Carbide Ball End Mills Endmills 3 4 4 Flute Double Double Ended 4 Flute Mill 3 32 Mill Counter Coated End Mill Cobalt Hss Radius End Mill Double End Mill 1 3 Resharpened Flute Center Cutting Single End Mill 1 3 4 Loc Endmills 1 4 Mills Bits 8 Loc Putnam End Mill Double End Mill 3 Radius Endmills Indexable Carbide Face Mill Assortment End Mill Corner Rounding 2 Resharpened Rougher End Mill Carbide End Mills 3 Hss Double Hss Co Shank End Mills Mill 1 Resharpened 4 Flt Shank Single Endmills 3 3 16 Carbide Dia Double 6 Flt 64 2 Flute 6 Flute End Mill Flute Single Endmills W 1 Shank 3 8 Shank Hss Data Flute Mill Cutters 3 Center Cutting End Mill Ball Nose Endmills 1 2 1/32 End Mill Flute Length Square End Mills Flute Square Ball Nose End Mills Iscar Mill Carbide Tin Coated Mill 15 16 4 Resharpened Hss Roughing End Mill Regrind 5 16 End Mill 5 Loc Flute Roughing Corner Rounding Endmills Carbide Endmills 4 Flute Cobalt Carbide End Mill 5 Mills 5 8 Cobalt Roughing 6 Flute Center Cutting Niagara Hss Roughing End Mill 1 16 2 Flute Mm Carbide Carbide 3 4 End Mill
 In 
 
Categories
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
5/8" 4 FLUTE VARIABLE HELIX CARBIDE END MILL - 2" LOC -SQUARE END -TiALN COATED
$
69.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
TiALN COATED. VARIABLE HELIX. IRREGULAR FLUTE SPACING. SQUARE END. High performance endmills at manufacturer direct pricing. 2" LENGTH OF CUT.
1/2" 4 FLUTE VARIABLE CARBIDE END MILL SQUARE END - 2" LOC - TiALN COATED
$
50.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
TiALN COATED. IRREGULAR FLUTE SPACING. VARIABLE HELIX. SQUARE END. High performance endmills at manufacturer direct pricing.
1/2" 4 FLUTE CARBIDE END MILL - REGULAR LENGTH - 5/8" LOC - TiALN COATED
$
36.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
Finish: TiALN. 1/2" 4 Flute SE Regular. Manufacturer direct pricing.
1/2" 4 FLUTE CARBIDE END MILL - REGULAR LENGTH - 1-1/4 LOC - TiALN COATED
$
34.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
Finish: TiALN. 1/2" 4 Flute SE Regular. Manufacturer direct pricing.
1PCS 1/2" 4 Flute 1" LOC Carbide End Mill 3" Overall Length-TiALN COATED New
$
26.49
Buy It Now
Free Shipping
Condition: New
Location: United States
Finish: TiALN. 1/2" 4 Flute SE Regular. Overall Length: 3". Length of Cut: 1". Center Cutting: Yes.
5PCS 1/2" 4 Flute 1" LOC Carbide End Mill 3" Overall Length-TiALN COATED New
$
105.99
Buy It Now
Free Shipping
Condition: New
Location: United States
Finish: TiALN. 1/2" 4 Flute SE Regular. Overall Length: 3". Length of Cut: 1". Center Cutting: Yes.
3/8" 4 Flute 1" LOC 2-1/2" OAL Variable Helix Carbide End Mill - TiALN COATED US
$
15.02
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Feature： 3/8" 4 Flute 0.020 Corner Radius Tialn Coated 1" Length Of Cut 2-1/2" Overall Length 3/8" Shank Diameter Description： This product has undergone ... morerigorous quality testing Durable and easy to install and replace The most cost-effective and best after-sales service Quality assurance that gives you peace of mind Package List: 1 PC 3/8" 4 Flute Carbide End Mill Notes: If you are uncertain about the item,please feel free to contact us for confirm..
Hertel 3/4" Diam, Fine Pitch, 3/4" LOC, 4 Flute Cobalt Roughing Square End Mi...
$
58.66
Buy It Now
Free Shipping
Condition: New
Location: Melville, United States
Hertel 3/4" Diam, Fine Pitch, 3/4" LOC, 4 Flute Cobalt Roughing Square End Mill TiCN Finish, 2-7/8" OAL, 3/4" Shank Diam, Single End, Centercutting, 30� ... moreHelix
Widia 5/8" 4 Flute Cobalt Roughing Endmill Center Cut TC624616016 (LOC1992A)
$
39.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
MPN: TC624616016. Length of Cut: 3/4". Condition: New.
HERTEL Square End Mill: 1/2″ Dia, 1″ LOC, 4 Flute, Solid Carbide 88246160
$
18.00
Buy It Now
$4.02 Shipping
Condition: New
Location: Rockford, United States
End Type: Single.
3/8" 4 Flute 1" LOC Variable Helix Carbide End Mill - .020 Radius - TiALN COATED
$
14.99
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Specification： 3/8" 4 Flute Variable Geometry Solid Carbide End Mill Tialn Coated Variable Helix Irregular Flute Spacing .020 Corner Radius 1" Length ... moreOf Cut 2-1/2" Overall Length 3/8" Shank Diameter Package Include： 1 x Carbide End Mill (As The Picture Shows) Notice: If you are uncertain about the item,please feel free to contact us for confirm. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard. .
HERTEL Square End Mill: 1/2″ Dia, 2″ LOC, 4 Flute, Solid Carbide
$
35.00
Buy It Now
$4.43 Shipping
Condition: New
Location: Rockford, United States
Flutes: 4 flute design ensures smooth and efficient cutting performance.
HERTEL Square End Mill: 1/2″ Dia, 1-1/4″ LOC, 4 Flute, Cobalt
$
17.00
Buy It Now
Free Shipping
Condition: New
Location: Rockford, United States
End Mill Material: Cobalt. End Type: Single.
1/2" 5 FLUTE CARBIDE END MILL - 2" LOC - SQUARE END - AlCrN COATED
$
55.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
AlCrN COATED. SQUARE END. High performance endmills at manufacturer direct pricing. 2" LENGTH OF CUT. mills are as good or better at much. lower prices.
3/8" 5 FLUTE LONG 1-1/4" LOC CARBIDE END MILL - SQUARE END - AlCrN COATED
$
35.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
AlCrN COATED. SQUARE END. High performance endmills at manufacturer direct pricing. 1-1/4" LENGTH OF CUT. mills are as good or better at much.
3/4" 3 FLUTE LONG 2-1/4" LOC CARBIDE END MILL ALUMINUM - SQUARE END - ZRN
$
124.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
ZRN COATED. 3/4" 3 FLUTE 37° HELIX. using premium 10% cobalt micrograin. SQUARE END. High performance endmills at manufacturer direct pricing. 2-1/4" ... moreLENGTH OF CUT.
SOLID CARBIDE END MILL 1/8" DIAMETER 1/2" LOC 4 FLUTE RHS RHC 30 DEG HELIX USA
$
4.99
Buy It Now
Free Shipping
Condition: New
Location: Huntington Beach, United States
Proprietary Flute Design makes this UNIQUE! What makes our End Mill different?.
10 PCS 1/8" Diameter 4 Flute 1/2" LOC 1-1/2" OAL Carbide Square End Mill
$
30.75
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Specification?? 10 Pack Solid Carbide End Mill - Square End Diameter: 1/8" Flute Length: 1/2" O.A.L.: 1-1/2" Shank: 1/8" 4 Flute Uncoated 1/8 dia carbide ... moreend mill, single square end. 100% Satisfaction Guaranteed Package including??.
5 PCS 5/32" 4 Flute Carbide End Mill 2" Overall Length 9/16" LOC New
$
24.37
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Feature： 5/32" 4 Flute Se Regular Solid Carbide End Mill 9/16" Length Of Cut 2" Overall Length 3/16" Shank Diameter Polished Shank Description： The product ... morehas passed strict quality testing Durable and easy to install and replace Cost-effective, good after-sales service Quality assurance for your peace of mind Package List: Mills 5 Pieces 5/32" 4 Flutes 9/16" Length for Cutting 2" Overall Length 3/16" Shank Diameter Notes: Pls check your old picture or model when you order it. If you are uncertain about the item,please feel free to contact us for confirm..
5 Pcs 1/4" 4 Flute 3/4" LOC 2-1/2" Overall Length Carbide End Mill New
$
33.72
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specifications: 1/4" 4 Flute Se Regular. Solid Carbide End Mill. 3/4" Length Of Cut. 2-1/2" Overall Length. 1/4" Shank Diameter. Polished Shank. Package ... moreList: 5× 1/4" 4 Flute Carbide End Mill UPC Does not apply Brand Handdo Item Type END MILL MPN 1198143 Flutes 4-Flute Material Carbide Helix Angle 30° Helix Overall Length 2-1/2in. End Type Single End Coating None Cutting Diameter 1/4in. Shank Diameter 1/4in. Length Of Cut 3/4in. Quantity 5 Condition New Custom Bundle No Bundle Description No.
GWS 5/8" 4 Flute Carbide CR Endmill 5/8" Shank .03" R AT4-625-030 (LOC1080A)
$
44.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
5/8 4FL 1.25 LC 3.5 OL R.03 Zombie Coated End Mill. MPN: AT4-625-030.
4MM Dia. LOC 10MM OAL 50 MM CARBIDE END MILL TiAIN COATED 4 FLUTE OHIO SELLER
$
5.95
Buy It Now
$5.40 Shipping
Condition: New
Location: Solon, United States
ISCAR ECI-4 500-2.0 , 1/2" x 2" LOC 4 FLUTE ENDMILL
$
34.99
Buy It Now
$7.99 Shipping
Condition: New
Location: Plainville, United States
ISCAR ECI-4 500-2.0 , 1/2" x 2" LOC 4 FLUTE ENDMILL. Condition is New. Shipped with USPS Ground Advantage.
GWS 3/4" 4 Flute Carbide SQ Endmill 3/4" Shank 1034069 (LOC843A)
$
59.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
MPN: 1034069. Condition: New.
HERTEL Square End Mill: 3/8″ Dia, 3/4″ LOC, 4 Flute, Cobalt 41114190
$
10.00
Buy It Now
$4.02 Shipping
Condition: New
Location: Rockford, United States
End Mill Material: Cobalt. End Type: Single.
HERTEL Square End Mill: 1/2″ Dia, 1″ LOC, 4 Flute, Solid Carbide
$
18.00
Buy It Now
$4.02 Shipping
Condition: New
Location: Rockford, United States
Here's what you need to know Type : Square End Mill. Why Choose This End Mill?. Shank Type : Straight shank for secure and stable mounting.
Interstate Square End Mill: 3/4″ Dia, 3″ LOC, 4 Flute, High Speed Steel
$
8.00
Buy It Now
$5.15 Shipping
Condition: Used
Location: Rockford, United States
Upgrade your machining capabilities with this high-quality Interstate Square End Mill. Whether you're a professional machinist or a hobbyist, this Interstate ... moreSquare End Mill is a valuable addition to your tool collection.
3MM DIA 100MM LOC 4FLUTE CARBIDE END MILL FOR ALL STEEL USA SELL
$
16.99
Buy It Now
$6.00 Shipping
Condition: New
Location: Irvine, United States
HELIX ANGLE 45 OVER LENGTH 100MM. SHAPE FLAT SIDE MILL SHANK TYPE ROUND. Send Check to 192 technology dr. Site P Irvine CA92618. If both quality and cost ... moreare your first concern. NUMBER OF FLUTE3 4 FLUTE LENGTH 15MM.
1/2" 3 FLUTE LONG 2" LOC CARBIDE END MILL FOR ALUMINUM - SQ END - ZRN COATED
$
57.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Batesburg, United States
ZRN COATED. 1/2" 3 FLUTE 37° HELIX. 2" LENGTH OF CUT. LONG LENGTH. lower prices.
1/2" Tip x 4" LOC - (4°) Per Side HSS Tapered End Mill - USA
$
172.34
Buy It Now
Free Shipping
Condition: New
Location: South Hackensack, United States
A tapered end mill is designed for side milling, contouring and machining angled slots. They are generally used in die-casts and molds. It is a center-cutting ... moretool that can be used for plunging. Degree: 4°.
3/8" PCD Square End Mill - 1/4" LOC Diamond Tool
$
209.95
Buy It Now
$4.95 Shipping
Condition: New
Location: Bensenville, United States
3/8" 2 Flute PCD Square End Mill. Use this tool on aluminum, copper, brass, bronze, plastics, graphite, and several other materials. Finish: Bright. Length ... moreof Cut: 1/4". Center Cutting: Yes.
1/2" Tip x 4" LOC - (4°) Per Side HSS Tapered Ball End Mill - USA
$
204.93
Buy It Now
Free Shipping
Condition: New
Location: South Hackensack, United States
A tapered end mill is designed for side milling, contouring and machining angled slots. They are generally used in die-casts and molds. It is a center-cutting ... moretool that can be used for plunging. Degree: 4°.
1/4" 4 FLUTE CARBIDE END MILL - TiALN COATED - 3/4” LOC - .250 x .750 x 2.5
$
12.00
Buy It Now
Free Shipping
Condition: New
Location: Marietta, United States
High precision solid carbide end mills from East Coast Carbide, Atlanta, GA.4 Flutes, Single End 35° RH Spiral, TiAlN coated for improved performance ... moreand tool life in harder materials or high temperature applications.Precision ground using the highest quality grinding wheels.1/4" cutting diameter x 1/4" shank diameter x 3/4" length of cut x 2-1/2" overall length.Cutting Diameter Tolerance: +.0000/ -.0012"Shank Diameter Tolerance: +.0000/ -.0005"Premium 10% Micrograin Carbide- perfect for your general purpose or difficult application!
CARBIDE END MILL 5/32" DIAMETER STUB 3/8" LOC 4 FLUTE 2" OAL 3/16" SHANK RHS RHC
$
8.66
Buy It Now
Free Shipping
Condition: New
Location: Huntington Beach, United States
Ideal for cutting material thinner than 3/8. Strong, more rigid and sturdy, which results in a better finish and most importantly FASTER MACHINE CYCLES. ... moreMilling can be used on plastic, aluminum.
CARBIDE END MILL 7/64" DIAMETER 3/8" LOC 4 FLUTE RHS RHC 30 DEG STANDARD HELIX
$
9.44
Buy It Now
Free Shipping
Condition: New
Location: Huntington Beach, United States
HERTEL 88245766 Solid Carbide Square End Mill 9/64″ Dia 9/16″ LOC 4 Flute 750036
$
8.50
Buy It Now
$5.35 Shipping
Condition: New
Location: Saint Louis, United States
HERTEL 88245766 Solid Carbide Square End Mill 9/64″ Dia 9/16″ LOC 4 Flute #750036 2″ OAL, 3/16″ Shank Dia, 30 deg Helix, Bright/Uncoated, Single End NOS, ... moreAs Shown
CARBIDE END MILL 1/4" DIA 3/4" LOC 4 FLUTE 2.5" OAL 35 DEGREE HELIX CENTER CUTG
$
13.64
Buy It Now
Free Shipping
Condition: New
Location: Huntington Beach, United States
Milling can be used on plastic, aluminum.
1/2" 4 Flute Long Carbide End Mill 2" LOC 4" Overall Length New
$
23.10
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Feature: 1/2" 4 FLUTE SE REGULAR SOLID CARBIDE END MILL 2" LENGTH OF CUT 4" OVERALL LENGTH 1/2" SHANK DIAMETER POLISHED SHANK Specifications: Material: ... moreSolid Carbide Length Of Cut: 2 in Cutting Diameter: 1/2 in Shank Diameter: 4/2 in Overall Length: 4 in Number Of Flutes: 4 Tool Coating: None Condition: New Package List: 1× 1/2" 4 Flute Carbide End Mill.
3/16" Tip x 4" LOC - (4°) Per Side Carbide Tapered End Mill - USA
$
226.69
Buy It Now
Free Shipping
Condition: New
Location: South Hackensack, United States
End Type: Square End A tapered end mill is designed for side milling, contouring and machining angled slots. They are generally used in die-casts and ... moremolds. It is a center-cutting tool that can be used for plunging.
3/8" Tip x 4" LOC - (4°) Per Side HSS Tapered End Mill - USA
$
143.77
Buy It Now
Free Shipping
Condition: New
Location: South Hackensack, United States
A tapered end mill is designed for side milling, contouring and machining angled slots. They are generally used in die-casts and molds. It is a center-cutting ... moretool that can be used for plunging. Degree: 4°.
5 PCS 5/32" 4 Flute Carbide End Mill 2" Overall Length 9/16" LOC New
$
24.37
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Feature: 5/32" 4 FLUTE SE REGULAR SOLID CARBIDE END MILL 9/16" LENGTH OF CUT 2" OVERALL LENGTH 3/16" SHANK DIAMETER POLISHED SHANK Specifications: Material: ... moreSolid Carbide Length Of Cut: 9/16 in Cutting Diameter: 5/32 in Shank Diameter: 3/16 in Overall Length: 2 in Number Of Flutes: 4 Tool Coating: None Condition: New Package List: 5× 5/32" 4 Flute Carbide End Mill.
1-1/2" Dia 1-1/4 Shank 8.369 Lead 8" LOC 4 Flute Square End Mill 10-5/8" OAL
$
27.74
Buy It Now
$13.99 Shipping
Condition: Used
Location: Middlebury, United States
Prefer to pick it up yourself?. Will there be a dock or forklift. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get ... morea freight quote we will need to know the following.
Colton Carbide End Mill 4 Flute Square Stub Coated 3/16" DIA x 3/8" LOC x 2" OAL
$
9.59
Buy It Now
$4.00 Shipping
Condition: New
Location: Huntington Beach, United States
30° Helix, 4 Flutes, Square End, Stub Length. h6 Shank tolerance for use with shrink-fit and other high performance tool holders. Engineered for high ... moreperformance in steel, stainless steel, titanium, and most other difficult to machine materials.
CARBIDE END MILL 7/64" DIAMETER 3/16" STUBBY LOC 4 FLUTE RHS/RHC STANDARD HELIX
$
9.44
Buy It Now
Free Shipping
Condition: New
Location: Huntington Beach, United States
Guhring 4 Flute Solid Carbide 1/2", 1-1/4" LOC, 1/2" Shank Diam, 4-1/2" OAL
$
62.10
Buy It Now
Free Shipping
Condition: New
Location: United States
Series/List 4260. Extended Reach Yes. Material Grade Ultra Fine Grain. Variable Helix Yes. Helix Angle 36.00/38.00. Center Cutting Center Cutting.
1 Pcs 1/2" 4 Flute 1-1/4" LOC Carbide End Mill 3" Overall Length-TiALN COATED
$
23.50
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Feature: 1/2" 4 FLUTE SE REGULAR SOLID CARBIDE END MILL TiALN COATED VARIABLE HELIX IRREGULAR FLUTE SPACING 1-1/4" LENGTH OF CUT 3" OVERALL LENGTH 1/2" ... moreSHANK DIAMETER POLISHED SHANK Specifications: Material: Solid Carbide Length Of Cut: 1-1/4 in Cutting Diameter: 1/2 in Shank Diameter: 1/2 in Overall Length: 3 in Number Of Flutes: 4 Condition: New Package List: 1× 1/2" 4 Flute Carbide End Mill.
CARBIDE END MILL 1/4" DIAMETER 3/4" LOC 4 FLUTE 4" OAL 35 DEGREE HELIX RHS RHC
$
18.89
Buy It Now
Free Shipping
Condition: New
Location: Huntington Beach, United States
Milling can be used on plastic, aluminum.
🇺🇸NIAGARA 0.659", 4 FLUTE END MILL, LOC 4, OAL 6 1/4.
$
39.99
Buy It Now
Free Shipping
Condition: Used
Location: Alvin, United States
NIAGARA 0.659", 4 FLUTE END MILL, LOC 4, OAL 6 1/4. Flutes are in good condition . See all my other great deals in my store. Thank you.
5× 1/4" 4 Flute Ball Nose Carbide End Mill 3/4" LOC 2-1/2" Overall Length
$
36.03
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Specification： 1/4" 4 FLUTE SE REGULAR BALL NOSE SOLID CARBIDE END MILL 3/4" LENGTH OF CUT 2-1/2" OVERALL LENGTH 1/4" SHANK DIAMETER TiALN COATED Package ... moreList: 5× 1/4" 4 Flute Ball Nose Carbide End Mill UPC Does not apply Brand yibei-tech Item Type End Mill MPN YI204470T Material Solid Carbide End Type Single End Cutting Diameter 1/4 in Overall Length 2-1/2 in Shank Diameter 1/4 in Length Of Cut 3/4 in Number Of Flutes 4 Tool Coating None Quantity 5 Custom Bundle No Modified Item No Quantity 5 Custom Bundle No Modified Item No Condition New.
Colton Carbide End Mill 4 Flute Square Stub Coated 1/4" DIA x 1/2" LOC x 2" OAL
$
11.99
Buy It Now
$4.00 Shipping
Condition: New
Location: Huntington Beach, United States
30° Helix, 4 Flutes, Square End, Stub Length. h6 Shank tolerance for use with shrink-fit and other high performance tool holders. Engineered for high ... moreperformance in steel, stainless steel, titanium, and most other difficult to machine materials.
CARBIDE END MILL 1/16" DIAMETER 1/4" LOC 4 RHS/RHC FLUTE SQ. END 30 DEG HELIX
$
6.99
Buy It Now
Free Shipping
Condition: New
Location: Huntington Beach, United States
4-FLUTE, RHS/RHS, STANDARD HELIX. MINI END MILL.
5pcs 1/8" double end 1/4(loc) Carbide End Mills Tialn Coated 4 flute 1006-TDE-18
$
44.00
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights, United States
10% cobalt, micro-grain.
5 PCS 3/32" 4 Flute 3/8" LOC 1-1/2" Overall Length Carbide End Mill US
$
14.40
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Feature: 3/32" 4 FLUTE SE REGULAR SOLID CARBIDE END MILL 3/8" LENGTH OF CUT 1-1/2" OVERALL LENGTH 1/8" SHANK DIAMETER POLISHED SHANK Specifications: Material: ... moreSolid Carbide Length Of Cut: 3/8 in Cutting Diameter: 3/32 in Shank Diameter: 1/8 in Overall Length: 1-1/2 in Number Of Flutes: 4 Tool Coating: None Condition: New Package List: 5× 3/32" 4 Flute Carbide End Mill.
5 Pcs 1/4" 4 Flute 2-1/2" Overall Length 3/4" LOC Carbide End Mill- TiALN COATED
$
32.50
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Specification 1/4" 4 FLUTE SE REGULAR SOLID CARBIDE END MILL 3/4" LENGTH OF CUT 2-1/2" OVERALL LENGTH 1/4" SHANK DIAMETER POLISHED SHANK Package including ... more5 PCS 1/4" 4 FLUTE CARBIDE END MILL Brand munirater MPN Does Not Apply Warranty 1 year End Type Single End Item Type End Mill Number Of Flutes 4 Helix Angle 30?? Helix Overall Length 2-1/2 in Cutting Diameter 1/4 in Shank Diameter 1/4 in Length Of Cut 3/4 in Material Carbide Quantity 5 UPC Does not apply Custom Bundle No Bundle Description No Modified Item No Modification Description No Feature ESCP.
Harvey Tool Carbide End Mills(3) 0.156" Dia. X 1/8 x .250 LOC 4 Flute Weldon
$
28.00
Buy It Now
Free Shipping
Condition: New
Location: North Chelmsford, United States
New Harvey Tool. 0.156" Dia. X. 250 LOC.
Niagara N37320 1" HSS, 5.441 Lead Square End Mill 4-Flute 6-1/2 OAL, 4" LOC
$
31.71
Buy It Now
$9.99 Shipping
Condition: New – Open box
Location: Middlebury, United States
MPN: N37320. Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we ... morewill need to know the following Weight (lbs, oz): 1,5.
4 Flute Solid Carbide 5/16" Diameter End Mill X 13/16" LOC X 2-1/2" OAL Bit
$
16.43
Buy It Now
$4.00 Shipping
Condition: New
Location: Huntington Beach, United States
4 Flutes, Single End 30-degree RH Spiral. Our part YG1-E5021020.
CARBIDE END MILL 3/8 DIA 1/4" LOC STUB 3.5" LONG HIGH HELIX ALUMI MILL 3 FLUTE
$
25.19
Buy It Now
Free Shipping
Condition: New
Location: Huntington Beach, United States
35 DEGREE HIGH-HELIX. GOOD FOR HIGH SPEED MILLING AND ANYTHING ALUMINUM. LONG WITH VARIOUS MILLING MACHINES.
5PCS 1/2" 4 Flute 1-1/4" LOC Carbide End Mill 3" Overall Length-TiALN COATED New
$
113.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specifications: Material: Solid Carbide Length Of Cut: 1-1/4 in Cutting Diameter: 1/2 in Shank Diameter: 1/2 in Overall Length: 3 in Number Of Flutes: ... more4 Condition: New Feature: 1/2" 4 FLUTE SE REGULAR SOLID CARBIDE END MILL TiALN COATED VARIABLE HELIX IRREGULAR FLUTE SPACING 1-1/4" LENGTH OF CUT 3" OVERALL LENGTH 1/2" SHANK DIAMETER POLISHED SHANK Package List: 5× 1/2" 4 Flute Carbide End Mill .
Hanita End Mill 3/4 x 4in LOC 4 Flute Cobalt, Hanita Wavcut2 roughing end mill
$
50.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: El Cajon, United States
3/4 x 4in LOC 4 Flute Cobalt End mill Wavcut2 roughing end mill. 4in Length of cut, 6.25 Over all Length.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
7/8 HSS 4 Flute Single End, End Mill 5" Loc by Cleveland Twist Drill
7/8 HSS 4 Flute Single End. End Mill 5" Loc by Cleveland Twist Drill This item is in good used condition and fully functional. This item will ship Flat Rate Priority Mail. If buying more than one item. Wait for invoice for combined shipping.
USED PUTNAM END MILL 1-1/4" X 6-1/2" X 4" LOC 4 FLUTE HSS USA 1237
YOU ARE BIDDING ON ONE USED PUTNAM END MILL 1-1/4" X 6-1/2" X 4" LOC 4 FLUTE HSS USA DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
Crest Cut Roughing End Mill .190 Radius 3 Flute 1" Shank 2 3/4" LOC HSS
Crest Cut Roughing End Mill.190 Radius 3 Flute 1" Shank 2 3/4" LOC HSS This item is in good used condition and fully functional. This cutter is under sized. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS Priority Mail Small Flat Rate Box and cost $5.80. Powered by SixBit's eCommerce Solution
4 Pc. Set of HSS 3/8”LOC 4 Flute Carbide Double End Mill Cutters
4 Pc. Set of HSS 3/8”LOC 4 Flute Carbide Double End Mill Cutters Sizes: 3/8" 1/4" 3/16" 1/8" Used. The 5/16 looks like it needs some help, all the rest look like they have at least one sharp end. Local Pickup welcome and free. For orders of more than one item I will give a shipping discount of up to 2.00 per additional item. I accept returns with-in 14 days of end of auction. Sorry there is no refund on shipping or handling. Buyer pays return shipping. I Thank You For Looking! HSS 110
End Mill - 6 Flute - 1 1/2" dia. - 1 1/4" Shank - 2 5/8" LOC - 5" OAL - Set of 2
End Mills- 6 Flute Set of 2 End Mills are used but in fair condition. 1 1/2" diameter 1 1/4" Shank 2 5/8" LOC 5" OAL Cutting diameter range 1.33- 1.39 HHS Any questions please e-mail before bidding See my other listings for more End Mills
End Mill - 4 Flute - 1/2" dia. - 1 1/4"LOC - 3 1/4" OAL - M42 Steel - Set of 3
End Mills- 4 Flute Set of 3 End Mills are used but in good condition. Cutting diameter ranges from.484- 490 1/2" diameter 1 1/4" LOC 3 1/4" OAL M43 Steel Any questions please e-mail before bidding See my other listings for more End Mills
USED WELDON CRESTKUT END MILL 2" X 4-1/2" OAL X 2" LOC 8 FLUTE COBALT 1235
YOU ARE BIDDING ON ONE USED WELDON CRESTKUT END MILL 2" X 4-1/2" OAL X 2" LOC 8 FLUTE COBALT 1-1/4" SHANK NON CENTER CUT DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13fc98058b3-0x103-
End Mill - 3 Flute - 1/2" dia. - 1 1/4"LOC - 3 1/4" OAL - HHS - Set of 3
End Mills- 3 Flute Set of 3 End Mills are used but in very good condition. 1/2" diameter 1 1/4" LOC 3 1/4" OAL HHS Any questions please e-mail before bidding See my other listings for more End Mills
REGRIND WELDON CRESTKUT 1" 4" OAL X 1-5/8" LOC 4 FLUTE HSS USA 265
YOU ARE BIDDING ON ONE REGRIND WELDON CRESTKUT 1" 4" OAL X 1-5/8" LOC 4 FLUTE HSS USA DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
3/4" Data Flute Endmill 3-1/4" Loc, 6" Oal, Used
Used carbide data flute endmill as titled. Still useable i believe just will not work for our application any longer with the wear on the tool. Slight chipping on flutes. Posted with
Garr Tool 84967 4" Carbide End Mill 5 Flute 1" Diameter 1" Shank 1 3/4" LOC
Garr Tool 84967 4" Carbide End Mill 5 Flute 1" Diameter 1" Shank 1 3/4" LOC Left Side: Right Side, Manufacturer: Garr Tool Model: 84967 Description: 4" Carbide End Mill 5 Flute 1" Diameter 1" Shank 1 3/4" LOC Condition: Used Packaging Condition Details: Not in Original Manufacturer Packaging Total Length: 4" Length of Cut: 1 3/4" Shank Diameter: 1" Cutting Diameter: 1" Type of Metal: Carbide Number of Flutes: 5 Notes: Item has not been tested. End Mill Tip shows signs of previous use. See photos for further review. Includes: 1 End Mill Packaging Condition: Not in Original Manufacturer Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover ... moreand American Express. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an additional $2 to ship. Heaviest item + $2 pe
3 USED LONG SERIES END MILLS 1" X 6-1/2" X 4" LOC 2 FLUTE HSS USA NO JUNK 553
YOU ARE BIDDING ON 3 USED LONG SERIES END MILLS 1" X 6-1/2" X 4" LOC 2 FLUTE HSS USA NO JUNK DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
3 Two Flute 1 1/4" HSS end mills. OAL 4" LOC 1 5/8" Very good condition. USA.
3 Two Flute 1 1/4" HSS end mills. OAL 4" LOC 1 5/8" Very good condition. USA. Here are three 1 1/4" 2 flute HSS end mills. These items are used. They are in very good condition, And will work fine. Made in the USA. 1" shank. Thank you for your interest in my auctions. Please email any questions before bidding. Thanks. Good Luck and Happy Bidding.
NIAGARA 35326 REGRIND .920 DIAMETER 2" LOC 4 FLUTE END MILL MACHINIST TOOLS
NIAGARA 35326 REGRIND.920 DIAMETER 2" LOC 4 FLUTE END MILL. EXCELLENT CONDITION I HAVE HUNDREDS OF TAPS. DIES AND, END MILLS 10% TO 25% OF RETAIL PRICE. MOST LISTED TAPS ARE NEW, REGRINDS, OR NEAR NEW CONDITION UNLESS STATED OTHERWISE. TAPS ARE EXPENSIVE BREAKING ONE COSTING YOU $200.00 MAKES NO SENSE IF THE SAME TAP IN MY STORE COST ONLY $20.00. EMAIL ME IF YOU DON'T SEE THE TAP YOU NEED. I PROBABLY HAVE IT JUST NOT LISTED. esblue3@hotmail.com. CHECK OUT ALL MY ITEMS FOR SALE. I AM A MACHINIST OF 35 YEARS I KNOW WHAT TOOLS ARE REQUIRED TO PRODUCE PRECISION PARTS. I TRY TO ONLY LIST ITEMS I WOULD USE OR HAVE USED. NO CHINA JUNK. PLEASE LOOK CLOSELY BEFORE MAKING OFFER OR BUYING. I DO OFFER 14 DAY RETURN. CHANGE OF MIND" WE ALL DO. SOME CASES I UNDERSTAND YOU MAY REALIZE YOU CAN'T AFFORD. OR REALIZED YOU CAN'T USE THE ... moreITEM. I'VE DONE THAT A TIME OR TWO. On Apr-14-13 at 17:32:32 PDT. Seller added the following information: Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
NIAGARA 33881 3/4 DIA, 2" LOC 3 FLUTE CENTER CUT END MILL MACHINIST TOOLS
NIAGARA 33881 3/4 DIA. 2" LOC 3 FLUTE CENTER CUT END MILL. VERY GOOD CONDITION I HAVE HUNDREDS OF TAPS. DIES AND, END MILLS 10% TO 25% OF RETAIL PRICE. MOST LISTED TAPS ARE NEW, REGRINDS, OR NEAR NEW CONDITION UNLESS STATED OTHERWISE. TAPS ARE EXPENSIVE BREAKING ONE COSTING YOU $200.00 MAKES NO SENSE IF THE SAME TAP IN MY STORE COST ONLY $20.00. EMAIL ME IF YOU DON'T SEE THE TAP YOU NEED. I PROBABLY HAVE IT JUST NOT LISTED. esblue3@hotmail.com. CHECK OUT ALL MY ITEMS FOR SALE. I AM A MACHINIST OF 35 YEARS I KNOW WHAT TOOLS ARE REQUIRED TO PRODUCE PRECISION PARTS. I TRY TO ONLY LIST ITEMS I WOULD USE OR HAVE USED. NO CHINA JUNK. PLEASE LOOK CLOSELY BEFORE MAKING OFFER OR BUYING. I DO OFFER 14 DAY RETURN. CHANGE OF MIND" WE ALL DO. SOME CASES I UNDERSTAND YOU MAY REALIZE YOU CAN'T AFFORD. OR REALIZED YOU CAN'T USE THE ... moreITEM. I'VE DONE THAT A TIME OR TWO. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
SPIRA-LOC 1" Indexable Milling Cutter 4 Flute 1" Shank (9062-1616)
SPIRA-LOC Indexable Milling Cutter(9062-1616) Cutting Diameter: 1" Shank Diameter: 1" Flute Length: 1-1/8" Overall Length: 3-5/8" Number of Flutes: 4 This mill is used and comes as shown. No further information is available.
Roughing Chamfered End Mill 3 Flute 1" Shank 1-1/4" LOC HSS
Roughing Chamfered End Mill 3 Flute 1" Shank 1-1/4" LOC HSS Comes as shown in photos. Please look carefully at the photos This item is in good used condition and fully functional. This cutter has been sharpened and/or radius and could be under sized. Powered by SixBit's eCommerce Solution
Roughing Chamfered End Mill 4 Flute 1" Shank 3-1/2" LOC HSS
Roughing Chamfered End Mill 4 Flute 1" Shank 3-1/2" LOC HSS Comes as shown in photos. Please look carefully at the photos This item is in good used condition and fully functional. This cutter has been sharpened and/or radius and could be under sized. Powered by SixBit's eCommerce Solution
Morse 5/8" 4 Flute HS 2.5" LOC Professionally CNC Resharpened End Mill
End Mill This is a Morse 5/8" HS 4 Flute 2.5" LOC Professionally CNC Resharpened End Mill. The mill is used but has been resharpened and kept in protective wax. The cutting edge that can be seen where the wax has torn away appears in excellent overall condition. Some light signs of wear. Use and/or discoloration may appear from the previous owner. Note that the cutting diameter may be slightly reduced from sharpening. Rough Measurements: Total Length: 4-5/8" Cutting Length(LOC) 2.5" Flute Length: 2.75" Shaft Length: 1-7/8" Shaft Dia: 5/8" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe ... moreeach item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
Roughing End Mill 3 Flute 7/8" Shank 1-3/4" LOC HSS
Roughing End Mill 3 Flute 7/8" Shank 1-3/4" LOC HSS Comes as shown in photos. Please look carefully at the photos This item is in good used condition and fully functional. This cutter has been sharpened and/or radius and could be under sized. Powered by SixBit's eCommerce Solution
GARR 82820 3/4" Carbide End Mill 5 Flute 1-5/8" LOC 3/4" Shank
GARR 82820 3/4" Carbide End Mill 5 Flute 1-5/8" LOC 3/4" Shank Left Side: Right Side, Manufacturer: GARR Model: 82820 Description: Carbide End Mill.75" Packaging Condition Details: No Packaging Bit is scuffed and dinged up. Overall Length: 4" Length of Cut: 1-5/8" Shank Diameter: 3/4" Cutting Diameter: 3/4" Type of Metal: Carbide Number of Flutes: 5 Includes: 1x 3/4" Carbide End Mill Item Condition: Packaging Condition: No Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. We do not accept international credit cards. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to ... moreUtah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an additional $2 to ship. Heaviest item + $2 per each additional item(up to 9 addition
Putnam 1/2" HS 94231 SE 4 Flute, 1" LOC A-34 3/8" Shank End Mill NIB
End Mill This is a Putnam 1/2" HS 94231 SE. 4 Flute, 1" LOC, A-34 3/8" Shank End Mill. The mill is new and still in the cardboard tube in excellent condition. The tube may show some light signs of shelf wear and/or discoloration from the previous owner. Rough Measurements: Total Length: 2.75" Cutting Length(LOC) 1" Flute Length: 1.25" Shaft Length: 1-5/8" Shaft Dia: 3/8" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
LIGHTLY USED NIAGARA CARBIDE BALL END MILL 7/16" X 4" X 2" LOC 4 FLUTE 181
YOU ARE BIDDING ON ONE LIGHTLY USED NIAGARA CARBIDE BALL END MILL 7/16" X 4" X 2" LOC 4 FLUTE DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
Niagara 1/2" HSS 45160 K6, 4 Flute, 1.25" LOC Pro CNC Resharp Double End Mill
Double End Mill This is a Niagara Cutter 1/2" HSS 45160 K6. 4 Flute, 1.25" LOC Professionally CNC Resharpened Double End Mill. The mill is used but has been resharpened and kept in its cardboard tube for protection. The cutting ends were originally TiN coated but it has been removed from the cutting edge from sharpening. The cutting edges appear in very good overall condition. The mill and tube may show some signs of use, wear and/or discoloration from the previous owner. Rough Measurements: Total Length: 4-1/8" Cutting Length: 1.25" Flute Length: 1.5" Shaft Length Flute End to Flute End: 1" Shaft Dia: 1/2" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and ... morebusinesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
CARBIDE ENDMILL SGS 1" 4 FLUTE 1 1/2 LOC 4" OAL W/ .015R
YOU ARE BIDDING ON A USED 1" CARBIDE 4 FLUTE ENDMILL 1" DIA 1 1/2 LOC 4" OAL IN EXCELLENT CONDTION. Posted with eBay Mobile dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-144dcb9e394-0x107-
Lot 2 Putnam 3/4" Cobalt Roughly 1.75" LOC, 4 Flute Double End Mill Used
End Mills This is a lot of 2 Putnam 3/4" Cobalt Roughly 1.75" LOC. 4 Flute Double End Mills. The mills are used but remain in good overall condition. Some signs of wear, use, discoloration and/or light surface rust may appear from the previous owner. The cutting edge appear in good sharp condition with little to no signs of chipping. The mill leads will be 4.038, 5.022 and/or 4.081. The mills may or may not have been sharpened by the previous owner and the cutting diameter may be slightly reduced if sharpened. Rough Measurements: Total Length: 5.75" Cutting Length: 1.75" Flute Length: 2-1/8" Shaft Length Between Flutes: 1-3/8" Shaft Dia: 3/4" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged ... moreto New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
Cleveland 3/4" (11/16") 4 Flute, 1-3/8" LOC 5/8" Shank End Mill Used
End Mill This is a Cleveland 3/4" reduced to 11/16" 4 Flute. 1-3/8" LOC, 5/8" Shank End Mill. The mill is used and may show signs of wear, use, scratching and/or discoloration from the previous owner. The mill diameter has been reduced from either use or sharpening to 11/16" The cutting edges appear sharp and show little to no signs of chipping. Overall the mill appears in very good condition overall. Rough Measurements: Total Length: 3.5" Cutting Length: 1-3/8" Flute Lenght: 1.5" Shaft Length: 1-15/16" Shaft Dia: 5/8" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe ... moreeach item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-144fe337bef-0x105-
Cleveland 1" HS Lead 5.088, 4 Flute 723995, 1-7/8" LOC, 3/4" Shank End Mill Used
End Mill This is a Cleveland 1" HS Lead 5.088. 4 Flute 723995, 1-7/8" LOC, 3/4" Shank End Mill. The mill is used and may show some light signs of wear, use and/or discoloration from the previous owner. Overall the mill appears in very good overall condition. The cutting edges appear sharp and show little to no signs of chipping. Rough Measurements: Total Length: 4-1/8" Cutting Length: 1-7/8" Flute Length: 2-3/16" Shaft Length: 2" Shaft Dia: 3/4" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The ... morefree listing tool. List your items fast and easy and manage your active items.
SGS 31768 Carbide 3/4" End Mill 2-1/4" LOC 3/4" Shank 4 Flute Refurbished
SGS 31768 Carbide 3/4" End Mill 2-1/4" LOC 3/4" Shank 4 Flute Refurbished Left Side: Right Side, Manufacturer: SGS Model: 31768 Description: Carbide 3/4" End Mill Packaging Condition Details: No Packaging Specifications Overall Length: 5" Length of Cut: 2-1/4" Shank Diameter: 3/4" Cutting Diameter: 3/4" Type of Metal: Carbide Number of Flutes: 4 Includes: 1x End Mill Item Condition: Packaging Condition: No Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. We do not accept international credit cards. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax ... moreof 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an additional $2 to ship. Heaviest item + $2 per each additional item(up to 9 additional items) Local Pickup
Hanita Varimill L:3.401 Carbide 5/8" End Mill 3-1/2" LOC 4 Flute Refurbished
Hanita Varimill L:3.401 Carbide 5/8" End Mill 3-1/2" LOC 4 Flute Refurbished Left Side: Right Side, Manufacturer: Hanita Varimill Model: L:3.401 Description: Carbide 5/8" End Mill Packaging Condition Details: No Packaging Specifications Overall Length: 6" Length of Cut: 3-1/2" Shank Diameter: 5/8" Cutting Diameter: 5/8" Type of Metal: Carbide Number of Flutes: 4 Includes: 1x End Mill Item Condition: Packaging Condition: No Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. We do not accept international credit cards. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State ... moreSales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an additional $2 to ship. Heaviest item + $2 per each additional item(up to 9 additional items)
SGS 39071 Carbide 3/4" End Mill 1-1/2" LOC 3/4" Shank 4 Flute Refurbished
SGS 39071 Carbide 3/4" End Mill 1-1/2" LOC 3/4" Shank 4 Flute Refurbished Left Side: Right Side, Manufacturer: SGS Model: 39071 Description: Carbide 3/4" End Mill Packaging Condition Details: No Packaging Specifications Overall Length: 4" Length of Cut: 1-1/2" Shank Diameter: 3/4" Cutting Diameter: 3/4" Type of Metal: Carbide Number of Flutes: 4*Stock Image* The picture below is a stock photo. The packaging for the item you will receive may vary slightly but the item is the same model and in the same condition as described. Includes: 1x End Mill Item Condition: Packaging Condition: No Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. ... moreWe do not accept international credit cards. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combi
Hanita Varimill 110039091 4V15S K2 3/4" Carbide End Mill 2-1/4" LOC 4 Flute Used
Hanita Varimill 110039091 4V15S K2 3/4" Carbide End Mill 2-1/4" LOC 4 Flute Used Left Side: Right Side, Manufacturer: Hanita Varimill Model: 110039091 Description: 4V15S K2 3/4" Carbide End Mill Packaging Condition Details: No Packaging Item is dinged up and scratched. Specifications Overall Length: 5" Length of Cut: 2-1/4" Shank Diameter: 3/4" Cutting Diameter: 3/4" Type of Metal: Carbide Number of Flutes: 4 Includes: 1x End Mill Item Condition: Packaging Condition: No Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. We do not accept international credit cards. To make a direct payment via credit card, please contact us directly by phone. ... moreAll Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an additional $2 to ship. Heaviest item + $2 per
Regal-Beloit 9/16 M-7 Lead 3.000 0330L, 4 Flute, 2.25" LOC End Mill Used
End Mill This is a Regal-Beloit 9/16 M-7 Lead 3.000. 0330L, 4 Flute, 2.25" LOC End Mill. The mill is used and may show some signs of wear, use and/or discoloration from the previous owner. The cutting edges appear sharp with little to no signs of chipping. Overall the mill remains in very good overall condition. Rough Measurements: Total Length: 4.5" Cutting Length: 2.25" Flute Length: 2.75" Shaft Length: 1.75" Shaft Dia: 9/16" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your ... moreitems fast and easy and manage your active items.
Weldon 1" A32-5 E81-HS 4 Flute 3/4" Shank 1-5/8" LOC Square End Mill
End Mill This is a Weldon 1" A32-5. E81-HS 4 Flute, 3/4" Shank, 1-5/8" LOC Square End Mill. The mill is used and may show signs of wear, use and/or discoloration from the previous owner. None of the slight imperfections that show should have an impact on the overall performance of the mill. The cutting edges look sharp and show little to no signs of chipping. The mill remains in very good overall condition. Rough Measurements: Total Length: 3-7/8" Cutting Length: 1-5/8" Flute Length: 1-7/8" Shaft Length: 2" Shaft Dia: 3/4" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each ... moreitem we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
Quinco 1-1/4" HS 4 Flute, 2" LOC End Mill Used
End Mill This is a Quinco 1-1/4" HS 4 Flute. 2" LOC End Mill. The mill is used and may show some signs of wear, use and/or discoloration from the previous owner. None of the slight imperfections should impact the performance of the product. The cutting edges are sharp and show no signs of chipping. The mill remains in excellent overall condition. Rough Measurements: Total Length: 4.5" Cutting Length: 2" Flute Length: 2.5" Shaft Length: 1-7/8" Shaft Dia: 1-1/4" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered ... moreby The free listing tool. List your items fast and easy and manage your active items.
GARR 12357 3/4" Carbide End Mill 3/4" Shank 3 Flute 2" LOC 3/4" Shank
GARR 12357 3/4" Carbide End Mill 3/4" Shank 3 Flute 2" LOC 3/4" Shank Left Side: Right Side, Manufacturer: GARR Model: 12357 Description: 3/4" Three Flute End Mill Packaging Condition Details: No Packaging Bit slightly used. Scuffed up side of bit. see pictures) Overall Length: 4" Length of Cut: 2" Shank Diameter: 3/4" Cutting Diameter: 3/4" Type of Metal: Carbide Number of Flutes: 3*Stock Image* The picture below is a stock photo. The packaging for the item you will receive may vary slightly but the item is the same model and in the same condition as described. Includes: 1x 3/4" Three Flute Carbide End Mill Item Condition: Packaging Condition: No Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit ... moreCard Payments: We accept Visa. MasterCard, Discover and American Express. We do not accept international credit cards. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or
Putnam HS 2" Lead 10.883 4 Flute 3" LOC, 1-1/4" Shank End Mill Used
End Mill This is a Putnam 2" HS Lead 10.883. 4 Flute, 3" LOC, 1-1/4" Shank End Mill. The mill is used and may show signs of wear, use and/or discoloration from the previous owner. None of the slight imperfections should impact the overall perfromance of the product. The cutting edge looks sharp and shows no signs of chipping. The mill remains in excellent overall condition. Rough Measurements: Total Length: 5.5" Cutting Length: 3" Flute Length: 3" Shaft Length: 2-3/8" Shaft Dia: 1-1/4" Shipping: Charged according to location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage ... moreyour active items.
Putnam 7/8" Cobalt Lead 4.761 4 Flute 2" LOC End Mill Used
End Mill This is a Putnam 7/8" Cobalt Lead 4.761. 4 Flute, 2" LOC End Mill. The mill is used and may show signs of wear, use and/or discoloration from the previous owner. None of the slight imperfections that show should impact the overall performance of the product. The cutting edge remains in good sharp condition with little to no signs of chipping. The mill remains in very good overall condition. Rough Measurements: Total Length: 4-1/8" Cutting Length: 2" Flute Length: 2-3/8" Shaft Length: 1.75" Shaft Dia: 7/8" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. ... morePlease feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
Putnam 1-1/4" Hi-Speed M-2, 2 Flute 1-1/16" LOC End Mill Used
End Mill This is a Putnam 1-1/4" Hi-Speed M-2. 2 Flute 1-1/16" LOC End Mill. The mill is used and may show signs of wear, use and/or discoloration from the previous owner. The cutting edges remain sharp but one has a very small chip about half way down the cutting edge. Overall the mill remains in good usable condition. Rough Measurements: Total Length: 3-5/8" Cutting Length: 1-1/16" Flute Length: 1-5/16" Shaft Length: 2.25" Shaft Dia: 1" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing ... moretool. List your items fast and easy and manage your active items.
Niagara 1-1/4" 52410 HSCO L7, 6 Flute, 6" LOC TiN Coated End Mill Used
End Mill This is a Niagara 1-1/4" 52410 HSCO L7. 6 Flute, 6" LOC TiN Coated End Mill. The mill is used and may show signs of wear, use and/or discoloration from the previous owner. None of these slight imperfections should impact the overall performance of the product. The cutting edges look good and sharp showing no signs of chipping. Overall this mill remains in excellent condition. Rough Measurements: Total Length: 8.5" Cutting Length: 6" Flute Length: 6-5/8" Shaft Length: 2" Shaft Dia: 1.25" Shipping: Charged according to location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and ... moremanage your active items.
Lot of 4 RBC 1/2" M-7 5L638A Lead 2.720, 2 Flute 1" LOC End Mill Used
End Mill This is a Lot of 4 RBC 1/2" M-7 5L638A Lead 2.720. 2 Flute, 1" LOC End Mill. The mill is used and may show signs of wear, use and/or discoloration from the previous owner. None of the slight imperfections should impact the overall performance of the product. The cutting edges appear sharp and show little to no signs of chipping. Overall the mills remain in good condition. Rough Measurements: Total Length: 3-3/8" Cutting Length: 1" Flute Length: 1.5" Shaft Length: 1.5" Shaft Dia: 1/2" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact ... moreus with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
Lot of 2 Putnam 1" Lead 5.488 4 Flute Cobalt 2" LOC End Mill
End Mill This is a Lot of 2 Putnam 1" Lead 5.488. 4 Flute Cobalt 2" LOC End Mill. The mill is used and may show signs of wear, use and/or discoloration from the previous owner. None of these slight imperfections should impact the overall performance of the product. The cutting edges appear sharp but one mill has a chip near the cutting face end of the mill. The other mill remains in very good overall condition. Rough Measurements: Total Length: 4.5" Cutting Length: 2" Flute Length: 2-5/8" Shaft Length: 2" Shaft Dia: 1" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we ... moresell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
Fargo 5/8" HS 4 Flute 4" LOC 6-1/8" Total Length End Mill Used
End Mill This is a Fargo 5/8" HS 4 Flute. 4" LOC, 6-1/8" Total Length End Mill. The mill is used and may show some signs of wear, use and/or discoloration from the previous owner. None of the slight imperfections should impact the overall performance of the product. The cutting edge looks sharp and shows little to no signs of chipping. The mill remains in very good overall condition. Rough Measurements: Total Length: 6-1/8" Cutting Length: 4" Flute Length: 4-5/8" Shaft Length: 1.5" Shaft Dia: 5/8" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel ... morefree to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
Cleveland 3/4" HS 4 Flute Roughly 45° End Lead 3.748, 727660 1-5/8" LOC End Mill
End Mill This is a Cleveland 3/4" HS 4 Flute Roughly 45° End Lead 3.748. 727660, 1-5/8" LOC End Mill. The mill is used and may show some signs of wear, use and/or discoloration from the previous owner. None of these slight imperfections should have an impact on the overall performance of the product. The cutting edges appear sharp and show little to no signs of chipping. The mill remains in very good overall condition. Rough Measurements: Total Length: 3-7/8" Cutting Length: 1-5/8" Flute Length: 2" Shaft Length: 1-3/4" Shaft Dia: 3/4" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe ... moreeach item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
Putnam 1" Lead 5.444 Cobalt 4 Flute, 2" LOC Ball End Mill Used
Ball End Mill This is a Putnam 1" Lead 5.444 Cobalt 4 Flute. 2" LOC Ball End Mill. The mill is used and may show signs of wear, use and/or discoloration from the previous owner. None of the very slight imperfections that can be seen from use should impact the overall performance of the product. The cutting edges look good and sharp showing no signs of chipping. Overall this mill remains in excellent condition. Rough Measurements: Total Length: 4.5" Cutting Length: 2" Flute Length: 2.75" Shaft Length: 1-7/8" Shaft Dia: 1" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we ... moresell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
Niagara 1" 48320 HSS E7 Lead 5.667 TiN Coated, 4 Flute, 4.25" LOC End Mill Used
Main Description This is. Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
CJT Durapoint 5/8" Carbide Tipped End Mill 4 Flute 1/2" Shank 1" LOC EDP32006250
CJT Durapoint 5/8" Carbide Tipped End Mill 4 Flute 1/2" Shank 1" LOC EDP32006250 Left Side: Right Side, Manufacturer: CJT Model: Durapoint Description: 5/8" Carbide Tipped End Mill 4 Flute 1/2" Shank 1" LOC 3-3/8" OAL Packaging Condition Details: Open Packaging Signs of use as seen in pictures End Mill Cutting Diameter: 5/8" Shank Diameter: 1/2" Length of Cut: 1" Overall Length: 3-3/8" Flutes: 4 Material: Carbide Tip Edp# 32006250 Includes: 1 End Mill Item Condition: Packaging Condition: Open Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. We do not accept international credit cards. To make a direct payment via credit ... morecard, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an ad
Garr 3/4" Carbide End Mill 3 Flute 3/4" Shank 1-1/2" LOC 4" OAL
Garr 3/4" Carbide End Mill 3 Flute 3/4" Shank 1-1/2" LOC 4" OAL Left Side: Right Side, Manufacturer: Garr Model: Unknown Description: 3/4" Carbide End Mill Packaging Condition Details: Open Packaging Grinded down spot on shank as shown in the last picture. End Mill Cutting Diameter: 3/4" Shank Diameter: 3/4" Length of Cut: 1-1/2" Overall Length: 4" Flutes: 4 Material: Carbide End EDP# 13354 Includes: 1 End Mill Item Condition: Packaging Condition: Open Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. We do not accept international credit cards. To make a direct payment via credit card, please contact us directly by phone. All ... moreUtah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an additional $2 to ship. Heaviest item + $2 per each ad
5/8" carbide endmill 4 flute center cutting slightly used 1-1/4' LOC
slightly used 5/8' carbide endmill 4 flute 1-1/4" length of cut
PUTNAM , 3/4 DIA , 3 " LOC 4 FLUTE END MILL MACHINIST TAPS TOOLS
PUTNAM. 3/4 DIAMETER, 3" LOC 4 FLUTE END MILL. EXCELLENT CONDITION I HAVE HUNDREDS OF TAPS. DIES AND, END MILLS 10% TO 25% OF RETAIL PRICE. MOST LISTED TAPS ARE NEW, REGRINDS, OR NEAR NEW CONDITION UNLESS STATED OTHERWISE. TAPS ARE EXPENSIVE BREAKING ONE COSTING YOU $200.00 MAKES NO SENSE IF THE SAME TAP IN MY STORE COST ONLY $20.00. EMAIL ME IF YOU DON'T SEE THE TAP YOU NEED. I PROBABLY HAVE IT JUST NOT LISTED. esblue3@hotmail.com. CHECK OUT ALL MY ITEMS FOR SALE. I AM A MACHINIST OF 35 YEARS I KNOW WHAT TOOLS ARE REQUIRED TO PRODUCE PRECISION PARTS. I TRY TO ONLY LIST ITEMS I WOULD USE OR HAVE USED. NO CHINA JUNK. PLEASE LOOK CLOSELY BEFORE MAKING OFFER OR BUYING. I DO OFFER 14 DAY RETURN. CHANGE OF MIND" WE ALL DO. SOME CASES I UNDERSTAND YOU MAY REALIZE YOU CAN'T AFFORD. OR REALIZED YOU CAN'T USE THE ITEM. I'VE ... moreDONE THAT A TIME OR TWO. On Apr-14-13 at 17:32:32 PDT. Seller added the following information: Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
PUTNAM , 7/8 DIA , 3 1/2 " LOC 4 FLUTE END MILL MACHINIST TAPS TOOLS
PUTNAM. 7/8 DIAMETER, 3 1/2" LOC 4 FLUTE END MILL. EXCELLENT CONDITION I HAVE HUNDREDS OF TAPS. DIES AND, END MILLS 10% TO 25% OF RETAIL PRICE. MOST LISTED TAPS ARE NEW, REGRINDS, OR NEAR NEW CONDITION UNLESS STATED OTHERWISE. TAPS ARE EXPENSIVE BREAKING ONE COSTING YOU $200.00 MAKES NO SENSE IF THE SAME TAP IN MY STORE COST ONLY $20.00. EMAIL ME IF YOU DON'T SEE THE TAP YOU NEED. I PROBABLY HAVE IT JUST NOT LISTED. esblue3@hotmail.com. CHECK OUT ALL MY ITEMS FOR SALE. I AM A MACHINIST OF 35 YEARS I KNOW WHAT TOOLS ARE REQUIRED TO PRODUCE PRECISION PARTS. I TRY TO ONLY LIST ITEMS I WOULD USE OR HAVE USED. NO CHINA JUNK. PLEASE LOOK CLOSELY BEFORE MAKING OFFER OR BUYING. I DO OFFER 14 DAY RETURN. CHANGE OF MIND" WE ALL DO. SOME CASES I UNDERSTAND YOU MAY REALIZE YOU CAN'T AFFORD. OR REALIZED YOU CAN'T USE THE ITEM. I'VE ... moreDONE THAT A TIME OR TWO. On Apr-14-13 at 17:32:32 PDT. Seller added the following information: Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
NIAGARA 20269, 13/16 " DIA , 1.1/4 " LOC TiN 2 FLUTE END MILL MACHINIST
NIAGARA 20269. 13/16" DIA, 1.1/4" LOC TiN 2 FLUTE END MILL. SHARP GOOD CONDITION I HAVE HUNDREDS OF TAPS. DIES AND, END MILLS 10% TO 25% OF RETAIL PRICE. MOST LISTED TAPS ARE NEW, REGRINDS, OR NEAR NEW CONDITION UNLESS STATED OTHERWISE. TAPS ARE EXPENSIVE BREAKING ONE COSTING YOU $200.00 MAKES NO SENSE IF THE SAME TAP IN MY STORE COST ONLY $20.00. EMAIL ME IF YOU DON'T SEE THE TAP YOU NEED. I PROBABLY HAVE IT JUST NOT LISTED. esblue3@hotmail.com. CHECK OUT ALL MY ITEMS FOR SALE. I AM A MACHINIST OF 35 YEARS I KNOW WHAT TOOLS ARE REQUIRED TO PRODUCE PRECISION PARTS. I TRY TO ONLY LIST ITEMS I WOULD USE OR HAVE USED. NO CHINA JUNK. PLEASE LOOK CLOSELY BEFORE MAKING OFFER OR BUYING. I DO OFFER 14 DAY RETURN. CHANGE OF MIND" WE ALL DO. SOME CASES I UNDERSTAND YOU MAY REALIZE YOU CAN'T AFFORD. OR REALIZED YOU CAN'T USE ... moreTHE ITEM. I'VE DONE THAT A TIME OR TWO. On Apr-14-13 at 17:32:32 PDT. Seller added the following information: Click Here. Double your traffic. Get Vendio Gallery- Now FREE! 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14554b6d8a1-0x10d-
Hanita 1-1/2" roughing endmill 6 flute 2" LOC M-42 1/4" rad. on end 3/4'sh
1-1/2" hanita 6 flute 1/4" rad. on end 3/4" shank 3/16" roughing pitch 2" length of cut M-42
Weldon KPSC32-7 6 Flute HSS End Mill, 4.55" LOC 2.27" LOC 1" CD 1" SD
Weldon KPSC32-7 6 Flute HSS End Mill. 4.55" LOC 2.27" LOC 1" CD 1" SD Left Side: Right Side, Manufacturer: Weldon Model: KPSC32-7 Description: 6 Flute HSS End Mill. 4.55" LOC 2.27" LOC 1" CD 1" SD Packaging Condition Details: No Packaging Cutting edges are chipped and shank is chipped End mill Flutes: 6 OAL: 4.55" LOC: 2.27" Cutting diameter: 1" Shank diameter: 1" Material: HSS Includes: Weldon KPSC32-7 6 Flute HSS End Mill. 4.55" LOC 2.27" LOC 1" CD 1" SD Packaging Condition: No Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. We do not accept international credit cards. To make a direct payment ... morevia credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title wil
Lot of 10, 1/8” HSS Co. 3/16”LOC 4 Flute Double End Mill Cutter
Lot of 10. 1/8” HSS Co. 3/16”LOC 4 Flute Double End Mill Cutter These are used so they vary in OAL 2.000”2.300” most 2.200” Local Pickup welcome and free. For orders of more than one item I will give a shipping discount of up to 2.00 per additional item. I accept returns with-in 14 days of end of auction. Sorry there is no refund on shipping or handling. Buyer pays return shipping. I Thank You For Looking! HSS 101
1" carbide Roughing End Mill 3 Flute, 1-1/4” LOC, 3” OAL USED FINE PITCH ROUGHER
1" DATA FLUTE carbide Roughing End Mill 3 Flute. 1-1/4” LOC, 3” OAL- used fine pitch rougher Up for auction NEW 1" carbide FINE PITCH Roughing End Mill 3 Flute. 1-1/4” LOC, 3” OAL-USED ROUGHER- With std Weldon Flat Mill Diameter: 1" Number of Flutes: 3 Material: Solid Carbide Finish: Uncoated Shank Diameter: 1" Length of Cut: 1-1/4" Overall Length: 3" Type: Center Cutting Made in USA This item is USED in TUBE.
Brubaker 79463 HSS Sngl End 4 Flute 1x3/4x1-7/8 LOC M7 NCC ACCULead 5.441 Bn 10
Brubaker 79463 HSS Single End Mill 4 Flutes. 1 x 3/4 x 1-7/8, LOC M7 NCC, ACCULead 5.441, Bin 10. 4 Flutes, Single End, 1" Flute Diameter, 3/4" Shank Diameter, 1-7/8" Length of Cut, 4-1/8" Overall Length, ACCU Lead 5.441 EDP# 79463, Lot# 701554, Payment Methods: You may pay instantly with PayPal by clicking the pay now button at the top. And all credit card options are available with Pay Pal. Credit cards: If your trying to purchase via Phone or E-Mail. Visa. Master Card, Discover ONLY. American Express only accepted with PayPal. 509-327-5544 M-F 9-5pm Pacific Time. Ask for Donny. Payments with PayPal and Credit Card orders will ship upon receipt of payment or after being cleared by Pay Pal. Pay Pal Check payments may take up to 4 days to clear Pay Pal and then shipped per Pay Pal Policy. Terms: Buyer assumes all risk ... moreof liability with respect to the purchase and use of the product/item. ALL USED TOOL SALES ARE FINAL and NO RETURNS. If you have a damaged product from shipping or not functional as describe. Then we must be contacted within 72hrs to process your claims. Buyer is responsible for all Return shipping charges and Subject up to a 15% Restocking fee. Unless Specified by Doughboys Tools& Equipment for items Not Damaged and are as listing is described. Photo's: All of our pictures are photos of actual items. Colors or packaging of items delivered may vary. But are the same product. Items are described to the best of our ability to be content accurate. Payment is expected within 14 days of auction close. If you have not made payment in the 14 day time period. We can not guarantee availability of product if you are past 14 days& items is re-listed. Shipping: SAVE on SHIPPING Combined shipping ONLY when multiple items are purchased and in your shopping cart as per E-Bays New Shipping policy’s as summer of 2013. All items in your shipping cart must be paid for at that same time so any combined shipping can be offered from Doughboys Tools. If your combined shipping question needs
MINT FAST CUT ROUGHER END MILL 1" X 4-1/2" X 2" LOC 5 FLUTE HSS USA 566
YOU ARE BIDDING ON ONE MINT FAST CUT ROUGHER END MILL 1" X 4-1/2" X 2" LOC 5 FLUTE HSS USA DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
CNC REGRIND UB ROUGHER END MILL 1" X 4-1/2" X 2" LOC 5 FLUTE COBALT USA 583
YOU ARE BIDDING ON ONE CNC REGRIND UB ROUGHER END MILL 1" X 4-1/2" X 2" LOC 5 FLUTE COBALT USA NON CENTER CUT DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
Brubaker 3/4" HSS 2A Acculead 4.081, 4 Flute 3" LOC End Mill Used
End Mill This is a Brubaker 3/4" HSS 2A Acculead 4.081. 4 Flute 3" LOC End Mill. The mill is used and may show some signs of wear, use and/or discoloration from the previous owner. The cutting edge appears in good sharp condition with little to no signs of chipping and only light wear. Overall the mill remains in good condition. Rough Measurements: Total Length: 5.25" Cutting Lenght: 3" Flute Length: 3.5" Shaft Length: 1.75" Shaft Dia: 3/4" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing ... moretool. List your items fast and easy and manage your active items.
Putnam 5/8" Hi-Speed 4 Flute, 1-7/16" LOC Double End Mill Used
End Mill This is a Putnam 5/8" Hi-Speed 4 Flute. 1-7/16" LOC Double End Mill. The mill may have been lightly used by the previous owner but remains in excellent condition. One of the ends has been kept in protective wax and the other appears sharp and shows little to no chipping. Some light signs of wear, use, scratching and/or discoloration may appear from the previous owner. Total Lenght: 5" LOC: 1-3/8" Flute Length: 1-11/16" Shaft Length Between Flutes: 1-9/16" Shaft Dia: 5/8" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with ... moreany questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
Putnam 3/4" Hi-Speed 4 Flute, 5/8" Shaft, 1.5" LOC End Mill
End Mill This is a Putnam 3/4" Hi-Speed 4 Flute. 5/8" Shaft, 1.5" LOC End Mill. The mill may have been used by the previous owner but is in like new condition if not new. It does not show signs of mounting and the cutting edges remain in very good condition with no signs of chipping. Some light signs of scratching and/or discoloration may appear from the previous owner either from light use or shelf wear. Rough Measurements: Total Length: 3-5/8" Cutting Length LOC: 1.5" Flute Length: 1.75" Shaft Lenght to Flute End: 1-7/8" Shaft Dia: 5/8" Shipping: Represents shipping within the lower 48 States ONLY. Insurance included. All others will be charged according to their location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately ... moredescribe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
3/4" End Mill 2 Straight Flute DE Quinco Tool 1-5/16 LOC
Quinco Tool Products Southfield. Michigan 3/4" diameter, 2 straight flutes, double end, approximately 1-5/16" length of cut, 5" overall length. This end mill is like new other than the packaging. The photos are of the piece you will receive so look closely.
CLEVELAND - END MILL - LH CUT - 6 FLUTE - 1 1/4" X 1/1/4" 4 1/2" OAL, 2" LOC,
CLEVELAND- LH END MILL- 1 1/4" X 1 1/4" 6 FLUTES- EXCELLENT- 4 1/2" OAL, 2" LOC, USA, REFER TO THE PHOTOS, I COMBINE SHIPPING.
TRW Hi-Speed 1-1/4" 6 Flute, 4" LOC, End Mill Used
TRW Hi-Speed 1-1/4" 6 Flute. 4" LOC, End Mill Used
Help