|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: 宝安区, China Welcome To Fibica Follow Daily Mart on: New Leadshine MA860H 2.4 Phase Stepper Motor Drive Up to 80VAC/110VDC 7.2A Product Description, The MA860H is ... morea high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology(self-adjust current control parameters) according to different motors. The driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors. Availability: Customize Usually Ships within 2-4days Any Questions: Feel free to contact our specialist for any compatibiltiy problems. Quantity: 1, If you have any questions. Please inform us by eBay message. Product Detail, Why Daily Mart? Payment Method, International Shipping, Return& Warranty, High performance. Cost-effective, Supply voltage up to 80VAC or +110VDC, Output current up to 7.2A, Self-adjustment technology, Pure-sinusoidal current control technology, Pulse input frequency up to 300 KHz, TTL compatible and optically isolated input, Automatic idle-current reduction, 16 selectable resolutions in decimal and binary. Up to 51,200 steps/rev, Suitable for 2-phase and 4-phase motors, Support PUL/DIR and CW/CCW modes, Short-voltage. Over-voltage, over-current and short-cicuit protection, Model: MA860H. Phase: 2. Control Mode: Step& Dir. Or CW/CCW. Max Input Frequency: 300Khz. Input Voltage Range: 36- 80 VAC/ 50- 100 VDC. Suggested Power Supply Voltage Range: 36-90 VDC/24-60 VAC. Output Current: 1.80- 7.20 A. of DIP Switch Resolution Configurations: 16. DIP Switch Resolution Setings: 400. 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000. of DIP Switch Current Configurations: 8. DIP Switch Current Configurations: 2.40A. 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A. Logic Current Range: 7-16mA(10mA typical) Logic Voltage Range: 4
Buy It Now
Free Shipping Condition: New Location: 金东区, China
Buy It Now
$2.99 Shipping Condition: New Location: China This module is based on the original imported Toshiba stepper motor drive chip THB6128 design, can drive 57 and the following two-phase four-wire stepper ... moremotor. chip using double full-bridge MOSFET driver, low on-resistance Ron = 0.55Ω.
Buy It Now
$25.78 Shipping Condition: Used Location: Plano, United States Appears in good condition. Powers up just fine but no other testing was done.
Buy It Now
Free Shipping Condition: New Location: United States Feature: 1. Features: Ultra quiet, high current, 256 microstep subdivision, good heat dissipation effect, UART mode support, use with MKS SGEN-L, without ... morejumper. TMC2209 has all the functions of TMC2208.
Buy It Now
Free Shipping Condition: New Location: 金东区, China Supports connection of electronic handwheel. The maximum step pulse frequency is 100KHz, suitable or stepper motors;. Supports 4 -axis linkage and can ... moreconnect 4 stepper motor drivers or drivers;. 1 status LED, indicating the connection status on the board.
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Applied Motion Products. Microstepping Motor Drive. If you do not have an account No Worries! Office Hours The Original Manufacturer's warranty does not ... moreapply. This is a surplus item. SKU# SB-168628.
Buy It Now
Free Shipping Condition: New Location: Hainesport, United States Install GRBL 1.1 firmware. support XYZ axis, double Yaxis. --4 layer PCB board, better heat dissipation performance. --the chip internal resistance is ... moresmaller, lower heat, better heat dissipation. --Integrated 3pcs A4988 drivers, directly connect to four wire stepper motor.
Buy It Now
Free Shipping Condition: New Location: China Stepper Motor Driver is a board for DRV8825 microstepping bipolar stepper motor driver. - DRV8825 driver board is widely used in 3D printers and small ... moreCNC machines. 5 UEETEK DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink for 3D Printer.
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. Internal Design: Internal support jog mode, while the built in smooth filtering function ensures stable operation without external acceleration ... moreand deceleration. Item Type: Stepper Motor Driver.
Buy It Now
Free Shipping Condition: New Location: China It is suitable for two-phase within 42,57 stepping 3A /four-phase /line/six-wire stepper motor, and is not suitable for more than 3A stepper motor. - ... moreSuitable for two-phase within 42,57 stepping 3A /four-phase /of line four /six-wire stepper motor, and is not suitable for more than 3A stepper motor.
Buy It Now
Free Shipping Condition: New Location: China Angle mode: any angle from 1 to 47 (minimum 0.01 degree). Equal portion mode: 1~2500 equal portions. Motor speed: 1500 revolutions per minute (up to 2000 ... morerevolutions per minute).
Buy It Now
$11.00 Shipping Condition: New Location: China 1 x TB6560 4 Axis Stepper Motor Driver board H Type. CNC stepper motor driver board TB6560 the new chip TB6560AHQ of TOSHIBA, the max ouput peak current ... morecan reach to 3.5A, this driver board can drive the 2-phase or 4-phase stepper motor whose current is less than 3A.
Buy It Now
Free Shipping Condition: New Location: China The mode needs to be set in [F5-F8] function. Feature: 1. This module has no programmable function, but built in a variety of fixed operation mode, the ... moreuser can quickly choose the appropriate trajectory.
Buy It Now
Free Shipping Condition: New Location: China Stepper Motor Driver is a board for DRV8825 microstepping stepper motor driver. - DRV8825 driver board is widely used in 3D printers and small CNC machines. ... more5 UEETEK DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink for 3D Printer.
Buy It Now
$20.74 Shipping Condition: New – Open box Location: San Jose, United States
Buy It Now
$18.59 Shipping Condition: New – Open box Location: San Jose, United States
Buy It Now
$2.98 Shipping Condition: New Location: China It can be used to test servo motor. Support servo motor: Pulse Width 0.5~2.5s. Step 2: Connect servo motor at 2 3Pin black male pins;. Request your understanding! ... moreVCC: It connects to positive pole at servo motor;.
Buy It Now
$3.20 Shipping Condition: New Location: China Description This module is blue PCB now.Please know it. The DRV8825 stepper motor driver carrier is a breakout board for TI's DRV8825 microstepping ... morebipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board. So it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting. Overcurrent and overtemperature protection, and six microstep resolutions(down to 1/32-step) It operates from 8.2– 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow(rated for up to 2.2 A per coil with sufficient additional cooling) 1）Simple step and direction control interface 2）Six different step resolutions: full-step. Half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step 3）Adjustable current control lets you set the maximum current output with a potentiometer. Which lets you use voltages above your stepper motor's rated voltage to achieve higher step rates 4）45 V maximum supply voltage 5）Built-in regulator(no external logic voltage supply needed) 6）Can interface directly with 3.3 V and 5 V systems 7）Over-temperature thermal shutdown. Over-current shutdown, and under-voltage lockout 8）Short-to-ground and shorted-load protection 9）4-layer. 2 oz copper PCB for improved heat dissipation 10）Exposed solderable ground pad below the driver IC on the bottom of the PCB 11）Module size. Pinout, and interface match those of our A4988 stepper motor driver carriers in most respects(see the bottom of this page for more information) This product is a carrier board or breakout board for TI’s DRV8825 stepper motor driver; we therefore recommend careful reading of the DRV8825 datasheet(1MB pdf) before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil(see the Power Dissipation Considerations section below for more information) Here are some of the driver’s key
Buy It Now
$2.00 Shipping Condition: New Location: China The drive board of DC brushless motor adopts DRV8313 chip. Maximum output current of each circuit: 2.5A. 1x Motor Driver Board. On board 3.3V LDO output, ... moremaximum current 10mA. Due to the light and screen difference, the item's color may be slightly different from the pictures.
Buy It Now
$1.63 Shipping Condition: New Location: China Applicable stepper motor: 42.57, 86 Phase type phase (4 wire 6 wire 8 wire line). the maximum output current of 4.0A eight optional;. standard common ... moreanode single pulse interface;. Color: See pictures.
Buy It Now
$5.00 Shipping Condition: New Location: China Shenzhen Getech Co. Geeetech has been one of the most prominent rising star in the area of 3D printing in Shenzhen ,China, even the world, since founded ... morein 2011. Geeetech advocates making 3D printing easy and economical and we are hoping to help more enthusiasts get easy access to the wonderful world of 3D printing.
Buy It Now
$44.90 Shipping Condition: For parts or not working Location: Fremont, United States Actual Picture of Unit. WAREHOUSE LOCATION. Local Pick-up is Available.
Buy It Now
Free Shipping Condition: New Location: China Answer: The upgraded TB6600 does not need to add series resistance. The best application object is 57 stepper motors and 42 stepper motors with a torque ... moreof 1.8N.m and below. Max Drive Current: 4A. Set 7 kinds of subdivisions (1/2A/2B/4/8/16/32) through 6-bit DIP switch.
Buy It Now
$36.00 Shipping Condition: New Location: China 2 phase Closed loop Step servo driver for NEMA34 motor 60V-80VAC 6A JMC 2HSS86H. Speed loop bandwidth: 500Hz (typical value). Current loop bandwidth: ... more(-3dB) 2KHz (typical value). Position loop bandwidth: 200Hz (typical value).
Buy It Now
Free Shipping Condition: New Location: United States DIY CNC Kit 3 Axis With CNC Breakout Board + Cables + TB6600HG Stepper Drivers + 3 Pieces TB6600HG Stepper Driver Board Controller The latest upgraded ... moresalable 5 axis breakout board is specially designed for the CNC single axis stepper driver controller. Such as TB6600HG, M542, M542H, MA560, MA860H, 2M542, 2M982 etc single axis stepper driver controller. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc. The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover. The brand new design with BiCD0.13(45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps. All the 2 Phase or 4 Phase of Nema17. Nema23, Nema24 and Small-sized Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver. Click here for In short. With this CNC Kit, you will get more benefits from the Kit on CNC work. Please purchase this kit with confidence. High performance. Cost-effective. Maximum support 5-axis stepper motor driver controller. Two types of ways to get power. 5V DC power supply or USB port to directly get power from PC. Two-stage signal processing. Smooth signal transmission, powerful anti-jamming. 5-input interface to define the Limit. Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc. Relay output control interface. Accessed by the spindle motor or the air pump, water pump, etc. 5-axis work LED display. Visually display the working condition of the stepper driver controller. High performance. Cost-effective. Automatic idle-current reduction. Supply voltage up to 45V DC. Output current up to 5.0A. Suitable for 2-phase and 4-phase motors. High speed optoelectronic iso
Buy It Now
Free Shipping Condition: New Location: China For 42, 57 3A stepper within two-phase / four-phase / four-wire / six-wire stepper motor is not suitable for more than 3A stepper motor. The maximum rated ... moreoutput: ± 3A, peak 3.5A. Using a fine-toothed thick radiator, good heat dissipation.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 1.3PCS Nema34HST9805-02B2 stepper motor 878oz. in=7.0N.m 2A 98mm ,dual shaft. 1.Nema34HST9805-02B2 stepper motor 878oz. 2.3PCS Stepper motor driver High ... morePerfermance Stepper Driver DM860A Up to7.8A, 24-80VDC.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Leadshine DM422C 2 Phase Digital Stepper Drive 2.2A 20-40VDC PUL/DIR CW/CCW. 1pc DM422C stepper drive. Stepper Motor Drive System. 4-5V when DIR-HIGH, ... more0-0.5V when DIR-LOW. Exchanging the connection of two wires for a coil to the driver will reverse motion direction.
Buy It Now
$1.99 Shipping Condition: New Location: China Module power consumption: 0.6W(excluding load motor)/static 0.1W. 1Set 13.5V 12F Single Row Farad Capacitor Super Capacitor 2.7V 60F Automotive. Response ... morespeed: K1, K2, 20ms, SW1, SW2, 50ms. 16V 1F/2F Farad Capacitor Module 6.92A 2.7V 10F Super Capacitors 0.5-20F Board.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States It can run independently as a module, or it can be used in conjunction with other systems. Adapted motor: stepper motor. We will not take any such responsibilities. ... moreMotor signal: common cathode. Input reverse connection protection: Yes.
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Model # : D225. Berger Lahr Schneider. 5-Phase Stepper Drive. NOT an authorized distributor for. w/ Card Holder/Breakout. your account number during checkout. ... moreIf you do not have an account No Worries!
Buy It Now
$2.99 Shipping Condition: New Location: China Electrical input signal is TTL compatible. Max Drive Current : 4A. Bipolar constant current chopper. Stationary current is automatically reduced by half.
Buy It Now
Free Shipping Condition: New Location: China The mode needs to be set in [F5-F8] function. Feature: 1. This module has no programmable function, but built in a variety of fixed operation mode, the ... moreuser can quickly choose the appropriate trajectory.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification Material: Aluminum, Steel Pipe, Plastic Speed: 8-15 Km/H Fuel Tank Capacity: 1.8l/0.47gal Displacement: 196cc Rotational Speed: 3600r/Min ... moreMotor: Four-stroke Power: 7.5hp Product Size: 118*38cm/46.45*14.96in Handle Length: 84cm/33.07in Operating Rod Length: 80cm/31.51in Package Size: 128*54*40.5cm/50.39*21.25*15.94in Applicable Boat Length: 2.7-8m/8.85-26.24ft Net Weight: 33kg/72.75lbs Gross Weight: 34kg/74.95lbs Package Included 1*Outboard Engine 1*Funnel All Accessories for Installation .
Buy It Now
Free Shipping Condition: New Location: 金东区, China Dual Y-ax is interface, can drive 2A 4-phase 2-wire stepper motor. Support stepper motor: 2-phase 4-wire motor within 2A. 1 x USB 2 -axis stepper motor ... moredriver board. Suitable for DIY desktop la ser engraving machine, dispensing machine printer, plotter.
Buy It Now
Free Shipping Condition: New Location: United States TBR_DOMAIN_NAME} eBay Item CNC 4 Axis TB6560 Stepper Driver Board Controller +CD SAVEBASE is a customer satisfaction oriented online business company ... moresupplying you with the best valued and affordable accessories and parallel devices for your personal digital equipments. Enjoy peace of mind shopping experience with us. © SAVEBASE.com All Rights Reserved, Only USD 77.69 +P&P USD* Product Info, Jump to: NEW* 4 Axis TB6560AHQ Stepper Motor Driver Controller Product Features: Toshiba TB6560AHQ chip- High power. Maximum 3.5A drive current chipset. 1-1/16 microstep setting- Higher accuracy and smoother operation than standard 1. 1/2 step. Adjustable 1.5A-3A drive current settings for each axis- 25%50%75%100% of full current can be set for different stepper motors. Attention: This driver is the 1.5A-3A version. It's specially designed for stepper motors with rated current from 1.5A to 3A. It's NOT compatible with stepper motors with rated current below 1.5A or above 3A. If the rated current your stepper motors is below 1.5A. You can choose the 0.5A-2.5A version. Please let us know which version(1.5A-3A version is default) you need immediately after placing an order. Overload. Over-current and over-temperature safety- Full protection for your computer and peripheral equipment. On board current switching- Power output can be set according to specific user requirement. Full closed-type optical isolation to protect the user's computer and equipment. Relay spindle interface- Outputs Max. 36V 7.5A for spindle motors or coolant pump(only one device can be powered by this output! 4 channel inputs interface- Can be used for XYZ limit and emergency stop. Professional design- Two stage signal processing with super anti-jamming. Bipolar constant current chopper drive with non-resonant region- Controls motors smoothly through range without creep effect. Four-input Control; Allow setting the Limit. Emergence-Stop, Midpoint-Alignment, Cutter-Alignment. Universal architecture- Supports most parallel
Buy It Now
$50.00 Shipping Condition: New Location: China Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. Stepper motor driver DM860A:(Nema34 stpper motor use this driver).
Buy It Now
Free Shipping Condition: New Location: China It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Hybrid Stepper Motor. Stepper Motor Driver. ... moreLinear Stepper Motor. Geared Stepper Motor. Closed Loop Stepper Motors.
Buy It Now
$3.20 Shipping Condition: New Location: China The SimpleFOCMini DC brushless motor driver board uses the DRV8313 chip. Turn on the serial monitor of the IDE and input T6.28, the brushless motor can ... morebe rotated. DC brushless motor driver module 1.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Support connection with electronic handwheel. The maximum step pulse frequency is 100KHz, suitable for servo or stepper motors;. Unplug the USB cable! ... moreAs long as you unplug the USB cable, the machine will automatically stop.
Buy It Now
$2.99 Shipping Condition: New Location: China Applicable stepper motor: 42.57, 86 Phase type phase (4 wire 6 wire 8 wire line). the maximum output current of 4.0A eight optional;. Extend Automation. ... morestandard common anode single pulse interface;. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Buy It Now
Free Shipping Condition: New Location: China 5PCS A4988 StepStick Stepper Motor Driver Module for 3D Printer Reprap Heat sink Description Features: A4988 is a complete microstepping motor driver ... morewith built-in translator for easy operation. The product can be full. Half, 1/4, 1/8 and 1/16 step mode to operate bipolar stepper motor output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator. The regulator can slow or mixed decay mode. The converter is the key to the easy implementation of the A4988. In inputting one pulse on the STEP input drives the motor one microstep. No phase sequence tables, high frequency control lines, or complex interfaces to programming. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened. Micro-step operation. The chopping control in the A4988 automatically selects the current decay mode(Slow or Mixed) In the mixed decay mode, the device is initially set to fast decay in the part of the fixed off-time, then a slow decay in the rest of the downtime. Mixed-decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry to improve the pulse-width modulation(PWM) power consumption when operating. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout(UVLO) and crossover current protection. Special power-Sort. A4988 surface mount QFN package(ES) The size of 5 mm × 5 mm nominal overall package height of 0.90 mm . And with exposed pad for enhanced thermal dissipation. The package is Pb(suffixes-T) with 100% matte tin leadframe plating. Specifications: Low RDS(ON) outputs· Automatic current decay mode detection/ selection· Internal UVLO· Mixed with slow current decay m odes· Synchronous rectification for low power dissipation· Crossover-current protection· Thermal shutdown circuitry· 3.3 and 5 V compatible logic supply· Thermal shutdown circuitry· Ground Fau
Buy It Now
$3.00 Shipping Condition: New Location: China The SimpleFOCMini DC brushless motor driver board uses the DRV8313 chip. Turn on the serial monitor of the IDE and input T6.28, the brushless motor can ... morebe rotated. DC brushless motor driver module 1.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States It can run independently as a module, or it can be used in conjunction with other systems. Adapted motor: stepper motor. We will not take any such responsibilities. ... moreInput reverse connection protection: Yes.
Buy It Now
Free Shipping Condition: New Location: China Support connection of electronic handwheel. The maximum step pulse frequency is 100KHz, suitable for servo or stepper motors;. 1 status LED to indicate ... morethe connection status on the board. 1 x USB cable.
Buy It Now
Free Shipping Condition: New Location: China Acceleration and deceleration: Yes. Suitable motor: stepper motor (single axis). The module has built-in multiple fixed operation modes, and the user ... morecan quickly select the appropriate motion trajectory.
Buy It Now
$3.00 Shipping Condition: New Location: China TB6600 4.5A CNC Engraving Machine Stepper 42.57,86 Motor Driver Board 12v- 36V, Description: Features: one Axis 4.5A Stepper Motor Driver Borad Controller ... moreTB6600 Chip. Support most parallet softwares KCAM4, MACH3 etc. 1 Axis TB6600 CNC Stepper Motor Driver Borad Controller DC: 12- 36V Motor: 42.57,86 1. New type of dual polarity constant current chopping technology; 2. With automatic half flow function; 3. Input pulse peak frequency up to 15 KHZ; 4. Support 5 kinds of segmentation choice: 1, 1/2, 1/4, 1/8, 1/16; 5. Has the current 0.7 A 4.5 A stepless adjustable function; M1 M2 M3 MOD OFF OFF OFF idle.Not locked OFF OFF ON 1 micro OFF ON OFF A model 1/2 micro OFF ON ON B model 1/2 micro ON OFF OFF 1/4 micro ON OFF ON 1/8 micro ON ON OFF 1/16 micro ON ON ON idle.Not locked Package 100% Brand New TB6600 Single-axis 4.5A CNC Engraving Machine Stepper Motor Driver Board x 1 payment: We only accept PayPal. Please make sure your shipping address is correct. We will only follow your address listed in the Paypal payment for the shipment. We have no responsibility for shipping address provided. Due to the secure reasons. We are not allowed the address change through email. Payment must be received 7 days after the auction ended. We reserve the right for selling the article to others if no payment is made after 7 days. Please do not bid if you are not intend to buy. Unpaid dispute& the negative feedback will be filed to eBay for the non payable bidders Shipping: We Ship to Worldwide. Except Italy, Nigeria,Pakistan,India,Saudi Arabia and we do not ship to APO/FPO. Items will be shipped within 1 business day on payment received. Items are shipped from Hong Kong using Airmail. Reach most of the countries within 10 to 22 business days. Delivery time depends on destination and other factors. It may takes up to 22 business days. If you aren't in above countries. Please DO NOT purchase, because we cannot ensure delivery. Here is the estimated time for your reference only: Country Delivery Time Working Days(not includ
Buy It Now
Free Shipping Condition: New Location: Matthews, United States SHIP FROM USA Features: Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. 6N137 high-speed optical coupling, ... moreguarantee high speed without losing step. Using the TB6560AHQ chip with low voltage shutdown, overheating stop and overcurrent protection circuit to ensure optimal performance. Rated maximum output: ± 3A, peak 3.5A. For two-phase within 42,57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable for more than 3A stepper motor. Automatic half current function. Subdivision: whole step, half-step, step 1/8, 1/16 step, a maximum of 16 subdivisions..
Buy It Now
$60.00 Shipping Condition: New Location: China CW5045 high microstep stepper motor driver. 3 Axis Nema23 Stepper Motor 270oz-in 76mm+CW5045 Driver For CNC Milling Machine. NEMA23 Stepper Motor. 3 xCW5045 ... morestepper motor driver 4.5A DC 50V. It is fit for NEMA17-23 two and four phase stepper motors whose current is small than 4.5A,it also can fit for small length NEMA34 two and four phase stepper motors.
Buy It Now
$3.00 Shipping Condition: New Location: China Collaborate with servo motors, stepper motors, and I/O ports to achieve automatic and manual operation. - Supports serial and parallel tasks. - Support ... morecutting, copying, and pasting processing instructions during program editing.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This4 Axis TB6560 Set Standard ... moreDriver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping Condition: New Location: Lexington, United States
$159.00 Shipping Condition: New Location: Hong Kong SAR China (Cnc Mill 3 axis NEMA34 MOTOR 30kg. 3x NEMA34 2ph 30kg. cm Step Motor. cm) step motor Running at 3000rpm. IDEAL FOR CNC PARALLEL PORT SOFTWARE. 1x PARALLEL ... morePORT CABLE. 1x CNC SOFTWARE BREAKOUT BOARD.
Buy It Now
Free Shipping Condition: New Location: China L9110S Dual DC motor Driver Controller Board. Description 1. Double L9110S chip motor driver chip 2. Power supply voltage: 2.5V- 12V 3. Suitable motor ... morescope: motor working voltage of 2.5 v to 12 v. 0.8 A maximum working current. 4. Can drive two DC motors at the same time. Or 1pcs Phase 4 line 2 type stepping motor. 5. PCB size: 2.8 cm* 2.1 cm super small volume. Suitable assembling. 6 Set fixed mounting holes. Diameter: 3 mm Interface specification: 6 p black bending row needles explain】 VCC— external 2.5 V to 12 V voltage GND— external GND IA1— external microcontroller IO port IB1— external microcontroller IO port IA2— external microcontroller IO port IB2— external microcontroller IO port. 4 p green terminal instructions】 OA1 OB1 connecting DC motor 2 pin. No direction OA2 OB2 connecting DC motor 2 pin. No direction. Directions for use Connecting VCC. GND module power indicator lighting IA1 input high level. IA1 input low level, OA1 OB1】 motor forward; IA1 input low level. IA1 input high level, OA1 OB1】 motor reverse; IA2 input high level. IA2 input low level, OA2 OB2】 motor forward; IA2 input low level. IA2 input high level, OA2 OB2】 motor reverse. Packing List: 2Pcs L9110S Dual DC motor Driver Controller Board Module Payment 1.We accept Paypal only. 2.Please confirm your ebay shipping address is exact after payment. 3.If your purchased is more than £30.00. Please offer your phone number with shipping address. Delivery details 1.All item will be shipped by Airmail post within 1 business days. It takes approximately 15-25 days(USA.CA,AU,UK,DE)other country 15-35 days. 2.Express by EMS.It must add 25 USD shipping fee, it takes 5-10 workdays for delivery.If you need other Epxress(DHL,Fedex.UPS etc.please contact us to talk about shipping fee. 3.Once you purchase. Please DONOT leave negative, neutral feedback or open any case if you have not received item in 30 days, because we have mentioned the shipping time repeatedly. Contact us 新建网页 2 1.We offer retail and wholesale servi
Buy It Now
Free Shipping Condition: New Location: United States 【US】CNC Nema23 2N. m Closed Loop Hybrid Stepper Servo Motor Driver Kit 76mm&HSS57. HSS57 2-Phase Hybrid Stepper Servo Driver. HSS57 is 2 phase nema 23 ... moreseries hybrid stepper servo driver. The torque reducing is much lower than open loop stepper motor when it is at higher speed.
Buy It Now
$18.00 Shipping Condition: Used Location: Fremont, United States MFG Modell: 1461321099334735.
Buy It Now
$1.90 Shipping Condition: New Location: China This module has no programmable function, but built in a variety of fixed operation mode, the user can quickly choose the appropriate trajectory. VARIOUS ... moreWAYS OF USE: Can be independently run as a module, can also cooperate with other systems, as a third party module to make up for the lack of motor output shaft.
Buy It Now
Free Shipping Condition: New Location: United States 4 pcs Stepper motor driver DM542A ,PEAK current 4.2A, replacing DM542A. Holding torque when DM542A run under high speed is also significantly higher than ... morethe other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Standard ... moreDriver Board is equipped with TB6560AHQ chip.
|
|
|
 |