|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$2.65 Shipping Condition: New Location: United States 4000W 220V AC SCR Voltage Regulator Dimmer Electric Motor Speed Controller NEW Description Specification: Advanced circuit design. Adopt driving resistive ... moreload,0-220V precise adjustable without hysteresis Working voltage: AC 220V Maximum power: 4000W(connected resistive load) Voltage regulation range: 0V-220V Protection: anti-spike. Surge, rc absorption(eoc) Applicable for electric furnace. Water heater, lamps, small motor, electric iron etc Dimensions: 91 X 59(Not Including Knob) How to use: Connect this product with AC 220V power.Connect output with lamp or home appliance or electric circuit, then rotate the knob for dimming, speed, voltage, temperature control. Note: the load can not exceed the specified maximum power. Otherwise it will burn the module and appliances; make use of resistive load; inductive, capacitive load power is greatly reduced(it is better to leave more than half of the amount) Package Includes: 1 x Voltage regulator dimmer Payment(1) We accept PayPal only. 2) We only ship the item to your Paypal address for fast and accurate shipment. If you want to change the address. Please add a note when you make the payment. after you have paid. 3) If you are paying through Paypal using eCheck. Note that your item can be shipped only after eCheck has cleared. 4) All payments are expected within 7 days after the last winning auction is closed. A non-payment dispute will be opened if full payment is not received. 5) After you have won the auction. An email will be sent to your eBay registered email address. Delivery details Under normal circumstances. United States Buyers'package is expected to be delivered within 9 to 15 business days with tracking. other countries are 18 to 21 business days without tracking(If you need a tracking. Please pay additional $3.00 USD and send us ebay/paypal message. All the items will be dispatched within 1 business day after the payment cleared. Items will arrive in 8-25 business days. The arrival time depends on some factors and different areas. Pleas
Buy It Now
Free Shipping Condition: New Location: Chino, United States Anti-vortex Baffle: It Can Prevent Vortex, Thus Improving Propeller Effectiveness As Well As Propulsion. The Outboard Boat Engine Motor Is Made of High-quality ... moreAluminum and Pp. This Motor Has Sufficient Power and Can Drive the Boat at a Fast Speed.
Buy It Now
Free Shipping Condition: New Location: Las Vegas, United States The maximum current of 20A gives the motor stronger power output. The rotation direction of the motor can be changed quickly by pressing the button. High ... moreefficiency, which effectively improves the utilization rate of energy and the efficiency of use.
Buy It Now
$76.12 Shipping Condition: For parts or not working Location: Gilroy, United States "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 1.Features Model:48V 4.0JET PUMP Rated power:1000W Starting system:Accelerated start Motor type:Brush-less motor Rated Voltage:48V rated current:21A Control ... moresystem:Tiller control Max speed:15km/h Overall L*W*H:365*220*920mm N.W/G.W:10/11kgs Packing size:95*42*29cm Transom plate height:420mm Battery model recommendation:30~120A safe storage battery,maximum power sustainable 2~8hours (1) Strong power, Low energy consumption and Long service life because of the pure copper core brushless motor (2) A muffler works for the motor to decrease the noise. (3) Omni-directional rotary joystick (4) Anti-winding function when Increase the thickening of the propeller (5) Aluminum alloy suspension bracket: 90° rotatable bracket, more stable and durable. (6) Easy to install, the motor can be mounted on.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description An outboard motor with high safety, durability, and ease of operation is an ideal assistant for water work or travel. This anti-impact and ... morewaterproof outboard motor fully protects your navigation safety. It has an outstanding capacity of 0.34 gallons and can provide sufficient power for the outboard engine to support long-distance voyages. Key Features Sturdy and Durable: Made of high-quality aluminum and aluminum alloy with a painting process, it can resist wear, shock, water, and deformation while keeping a smoother and more beautiful exterior. Friendly Design: The high-quality carburetor allows gasoline to burn fully while driving, saving energy and your costs. In addition, the machine adopts a cordless design, mainly driven by gasoline, providing more convenience for o.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States With super-low power consumption, the Genuine gets the most out of your 48V battery. Suitable for small water crafts such as inflatable boats, canoes ... moreand aluminum fishing boats, Your Genuine employs a CAD-designed triple-blade propeller, giving you performance far superior to other blade designs whilst also keeping the weeds away.
Buy It Now
Free Shipping Condition: New Location: China Used: An item that has been used previously. The item may have some signs of cosmetic wear. But is fully operational and functions as intended. This item ... moremay be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. OUR SURPLUS Item will be ship via economy shipping. Delivery take about 2 to 5 working days to most countries or urgent shipment via FEDEX, UPS,OR DHL +++Please read the Terms& Condition before purchase+++ ACCESSORIES Any accessories. Manuals, cable and etc that are not in the picture listing or mention, it is NOT INCLUDED. INTERNATIONAL BUYER Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying WARRANTY Our warranty is valid for 14 days after initial receipt of item. PAYMENT TERMS PAYPAL. WIRE TRANSFER TT or Contact Us RETURN POLICY-For item condition not as described. Defective. Please report to us for replacement or refund within 14 days of receipt. Returns must be in their original condition and include all shipped accessories. Shipping fees will NOT be credited for returns and ALL RETURN SHIPPING COSTS ARE THE RESPONSIBILITY OF BUYER. All items will ship with our warranty label. If any stickers have been removed or tampered. Your refund will be canceled.
Buy It Now
Free Shipping Condition: New Location: United States Maximum power: 4000W (load power 2000W). Wide range of application scenarios, suitable for all types of industrial DIY occasions. Otherwise deal is final.
Buy It Now
$2.76 Shipping Condition: New Location: China The maximum output power: 2000W. It can be very convenient adjust the current up to 25A, and solve the over current problem of the heating wire resistance ... moreis too small in the case of cooling causing good.
Buy It Now
Free Shipping Condition: New Location: China Working current: 2A. Modified Sine Wave Inverter 300W 12V to 220V 50Hz Inverter Circuit Board. 2 IN1 DC 12V/24V 12 Channel DIO Ethernet/RS485 Relay Switch ... moreModule Modbus. New N438C15 DC 12V DC 24V 15 Channel RS485 RS232 Modbus RTU Relay Board.
Buy It Now
Free Shipping Condition: New Location: Suffern, United States CW CCW: support. support for Motor: brushless motor. Output current:
Buy It Now
Free Shipping Condition: New Location: United States Maximum power: 2000W. Health&Beauty. Grease Gun Coupler 1/8" NPT Double Handle High Pressure Grease Oil Pump Nozzle. Waterproof Leather Sponge Cushion ... moreFace Cover Eye Mask Pad For Oculus Quest 2 VR. Applicable appliance.
Buy It Now
Free Shipping Condition: New Location: United States Maximum power: 2000W. RC Helicopter Airplane Car Training USB Simulator Cable Kit For FlySky FS-SM100. Phone RF Signal Blocker Anti-Radiation/Degaussing/Signal ... moreShield Case Bag Pouch. 2.5" SATA USB 3.0 2.0 Hard Drive Disk HDD SSD Enclosure External Laptop Case.
Buy It Now
Free Shipping Condition: Used Location: Tyngsboro, United States This is a small and powerful servo solution. The motor length is 2.09”. The overall length is 2.41”. There are 6 coded wires from the rear.
Buy It Now
Free Shipping Condition: New Location: United States CW CCW: support. support for Motor: brushless motor. Output current:
Buy It Now
$2.99 Shipping Condition: New Location: China
Buy It Now
$3.00 Shipping Condition: New Location: China Night Light Ceiling Light Sensor Light E14 LED Bulb E27 LED Bulb GU10 LED Light Desk Lamp Book Light Color Clock Clock 10000W AC 220V SCR Voltage Regulator ... moreSpeed Controller Dimmer Thermostat Features: 100% brand new. Voltage: AC 220V. Maximum Power: 10000W(connected resistive load) Voltage Regulation: AC 0V to Input-voltage. Rotating Rod Diameter: 6mm. High temperature fire FR4 circuit board. For electric furnace. Water heater, lamps, small motor, electric iron etc. Dimensions: 85 x 90 x 50mm. Note: NO Retail Box. Packed Safely in Bubble Bag. Note: The load cannot exceed the specified maximum power. Please pay attention to the temperature at first use. if the temperature too hot exceed 80 °c, please enhance heatsink, or would burn out module and load. If connect to inductive load or Capacitive load. The power must leave Two-thirds(2/3) margin. How to Use: Connect this device with lamp or home appliance or electric circuit. Then rotate the knob for dimming, speed, voltage, temperature control. Package list: 1* Voltage Regulator Shipping Policy Payment Method Returning Policy Contact Us We Ship to Worldwide. We ship to PayPal's confirmed address ONLY. Please make sure your address in PayPal is matched with your shipping address before you pay. Item will be sent out by Air mail within 24-48 business hours after cleared payment(excluding weekend& holiday) Arrival time(estimated) United States/United Kingdom/Australia/Canada:14-21 working days(18-29 days) Germany/France/Spain/Eastern Europe:18-25 working days(24-35 days) Other countries:25-35 working days(35-49 days) Shipping time is only estimated and not guaranteed. If not get item after 60 days. Please contact us for solving. For bulk purchases weight over 2kg. We may offer EXPRESS way. We accept PayPal only. All major credit cards are accepted through secure payment processor PayPal. Payment must be received within 7 business days of auction closing. If you have bought multiple items from me. You can send me one payment for all the items instea
Buy It Now
$20.00 Shipping Condition: New Location: Chino, United States Items Description 1.Features (1) Strong power, Low energy consumption and Long service life because of the pure copper core brushless motor (2) A muffler ... moreworks for the motor to decrease the noise. (3) Omni-directional rotary joystick (4) Anti-winding function when Increase the thickening of the propeller (5) Aluminum alloy suspension bracket: 90° rotatable bracket, more stable and durable. (6) Easy to install, the motor can be mounted on board without any tools Customer Note: This product does not include batteries and chargers Recommended battery model: one 48v battery/4 12v battery , you can buy it at a local store that sells batteries.
Buy It Now
$3.75 Shipping Condition: New Location: China PWM duty cycle: 1%-100%. PWM frequency: 20khz. We afford all cost if it's our fault. Weight: 13g. We maintain the excellent service standards.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States (1) Strong power, Low energy consumption and Long service life because of the pure copper core brushless motor (2) Omni-directional rotary joystick (3) ... moreAnti-winding function when Increase the thickening of the propeller (4) Aluminum alloy suspension bracket: 90° rotatable bracket, more stable and durable. (5) Easy to install, the motor can be mounted on board without any tools Brand: HANGKAI Model: 48V Rated power (W): 1800 Starting system: Switch knob added Motor type: Brushless motor Rated voltage (V): 48 Rated speed (r/min): 3000 Rated current (A): 35 Control system: Tiller control Manipulation mode Rod length (cm): 91 G.W./N.W.(kgs): 16/12 Total height (cm): 132 Transom plate height (mm): 381 ~ 508.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States AC-WWHZBY-3115 Features: 48V-72V 1800W Electric Motorcy Brushless Motor Controller Perfect replacement for the old or damaged one. The product according ... moreto market demand to do without Hall zero start, brushless dual-mode smart measure battery voltage, motor phase. Powerful start, climbing power large and small motor noise. Waterproof, durable to use. Fits for 8 wires (3 phase-cables & 5 hall-cables) DC brushless motors. Specifications: Voltage: 48-72v Power: 1800 w Phase Angle: 60/120 ° universal Function: cruise function, shift function, anti - theft function, reverse function, anti - flight function Package Included: 1 x Motor Speed Controller Our Gauranteen: 1.We Pro.
Buy It Now
Free Shipping Condition: New Location: China The use of high-power MOS tube drive, PWM pulse width speed regulation, stable speed regulation, not thyristor. The speed is linear smooth and uniform, ... morefrom the stop of 0V to the highest speed of 220V can be gradually adjusted.
Buy It Now
Free Shipping Condition: Brand New Location: China Efficiency (η): 95%. 3: Stable, durable and long service life. Zero hysteresis, zero latency, superior heat dissipation. Top End Kit. Rated current: 9A. ... moreLimiting current: 18A. Color: As shown. 4: Easy to use, convenient to connect to the electrical appliances and do not need soldering.
Buy It Now
Free Shipping Condition: New Location: United States Item model number CCMFC. Part Number CCMFC. Suitable for the DC fan within 1A, Peak current 2A. Style Modern. 1 x button switch (a gift free). Add to ... moreFavorite. Color Green,White. We do not accept P.O. Boxes.
Buy It Now
$14.00 Shipping Condition: New Location: Chino, United States Specification Model: DD-48V-1200W Power: 1200W Rated Voltage: 48V Rated Current: 25A Rated Speed: 3000rpm No-load Speed: 4000 rpm Process: Spray Painting ... moreGear Ratio: 2.08(27:13) Control System: Tiller Control Max. Speed: 15km/h/9.3mph Motor Type: Pure Copper Brushless Motor Reverse Gear: Yes Max. Load-bearing Capacity: 500kg/1102lbs Recommended Battery: 1*48V/4*12V (Not Included ) Propeller Model(in): 7-1/4x5-A(The size of the propeller is 7.25 inches/18.4cm, and the propelling distance of the propeller is 5 inches/12.7cm after one revolution) Length of Suitable Ships: Less than 5m/16.4ft Package Size: 95*42*29cm/37.4*16.53*11.41in Product Size: 92*36.5*22cm/36.22*14.37*8.66in Gross Weight: 14kg/30.86lbs Net Weight: 12kg/26.45lbs Tail Plate Height: 42cm/16.53in(Sho.
Buy It Now
$10.00 Shipping Condition: New Location: Chino, United States (1) Strong Power, Low Energy Consumption and Long Service Life Because of the Pure Copper Core Brushless Motor. Motor Type：brushless Motor. 2.2kw Outboard ... moreMotor Electric Boat Engine Boat Kayaks Propeller Boat Parts.
Buy It Now
Free Shipping Condition: New Location: Chino, United States AC-WWHZBY-3114 Features: 48V-72V 2000W Electric Bicycle Brushless Motor Controller for Scooter E-Bike. Perfect replacement for the old or damaged one. ... moreThe product according to market demand to do without Hall zero start, brushless dual-mode smart measure battery voltage, motor phase. Powerful start, climbing power large and small motor noise. Waterproof, durable to use. Suitable for electric bicycle & scooter,Mechanical or electric forklift etc. Fits for 8 wires (3 phase-cables & 5 hall-cables) DC brushless motors. Specifications: Voltage: 48-72v Power: 2000W Phase Angle: 60/120 ° universal Specification: 23x10x6cm Function: cruise function, shift function, anti - theft function, reverse function, anti - flight function Package Included: 1 x Motor Speed Controller.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Cast Iron Wok Rack Gas Stove Cooker Bracket Gas Ring Reducer Wok Support Rack. Are you in search of a sturdy, trustworthy tool that can do multiple jobs ... moreat once?. If yes, look no further! It is one of the best choices for you.
Buy It Now
Free Shipping Condition: New Location: Las Vegas, United States This governor is used for DC brushed motors. not suitable for DC brushless motor speed; can not be used as a regulator or regulator! The motor can be ... moredivided into positive and negative. When the running direction is inconsistent with the expectation, the direction can be changed by adjusting the line sequence.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fits for 8 wires (3 phase-cables & 5 hall-cables) DC brushless motors. Function: cruise function, shift function, anti - theft function, reverse function, ... moreanti - flight function. Phase Angle: 60/120 ° universal.
Buy It Now
$3.50 Shipping Condition: New Location: China This driver board can drive micro 3-wire or 4-wire Hall free brushless motors such as hard drive brushless motors and optical drive brushless motors. ... moreAfter the short circuit overcurrent protection of the brushless driver board, the power indicator light turns off.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Quick Start Device, Which Can Be Quickly Started With One Easy Pull. - Maximum Speed: 3600rpm. - Power: 3.9kw. Flat Output Shaft, Stable And Durable, ... moreStrong Torque Power Output. FeaturesCompact Design, Unique Appearance, High quality.
Buy It Now
Free Shipping Condition: New Location: China Features: The upgraded version of TB6600 is a driver suitable for 57/42 type two-phase hybrid-stepping motor with phase current under 4.0A. Model: TB6600. ... moreApplication: for 42/57 stepper motor. Set 7 kinds of subdivisions (1/2A/2B/4/8/16/32) through 3-bit DIP switches, and 8 gear output current (0.5A/1.0A/1.5A/2.0A/2.5A/2.8A/3.0A/3.5A).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Brand：hangkai Model：60v Rated Power (W)：2200 Starting System：switch Knob Added Motor Type：brushless Motor Rated Voltage (V)：60 Rated Speed ... more(R/Min)：3000 Rated Current (a)：38 Control System：tiller Control Manipulation Mode Rod Length (Cm)：91 G.w./N.w.(Kgs)：17/14 Total Height (Cm)：132 Transom Plate Height (Mm)：381 ~ 508 Battery Model Recommendation： Choose Batteries with a Capacity of over 120ahnote:the Product Does Not Contain the Battery. Warranty:1year Warranty Application Area Used in Fishing, Aquaculture, Outdoor Adventure, Etc. Customer Note: This Product Does Not Include Batteries and Chargers.
Buy It Now
Free Shipping Condition: New Location: China Ashley Automation. 100% Money Back.
Buy It Now
Free Shipping Condition: New – Open box Location: West Harrison, United States The instrustion manual is included. There are 2 small pieces I have not been able to put my hands on. The clutch disc and pressure plate is a separate ... morekit (02-1306) but is being sold with this assembly.
Buy It Now
Free Shipping Condition: Brand New Location: China Maximum power: 2000W.
Buy It Now
Free Shipping Condition: New Location: Florence, United States Have you encountered any difficulties in venturing into long-distance deep water?. An outboard motor that can handle various complex water conditions ... morecan provide you with assistance! 3.5 HP New Outboard Engine 2 Stroke Fishing Boat Motor With Water Cooling System.
Buy It Now
$33.07 Shipping Condition: Used Location: Fraser, United States Hello. You are purchasing the pictured Yaskawa Servopack. The item is New old stock. If you have any questions please email me. Thank you
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification Color: Black Style: Modern Condition: New Material: 600D Oxford Cloth Vehicle Service Type: Boat Applicable Outboard Motor: 15-20HP Cover ... moreCircumference: 1.5m/ 4.92ft Cover Height: 1.25m/ 4.1ft Package Size: 20*20*5cm/ 7.87*7.87*1.97in Net Weight: 0.35kg/ 0.772lbs Gross Weight: 0.4kg/ 0.882lbs Package Included 1* Outboard Motor Cover 1* Storage Bag Notes 1.Please carefully check the size of the motor cover before purchasing. 2.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Buy It Now
$25.00 Shipping Condition: For parts or not working Location: Broomfield, United States The FANUC A06B-6096-H104 Servo Amplifier Module Model SVM1-40L is a single axis alpha servo amplifier that is fitted for 12/2000(40L) servo motors. If ... moreAlarm Codes 368 or 369 are triggered by your CNC machines, you may need to update your FANUC A06B-6096-H104 Servo Amplifier Module to the latest software.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Model: DD-48V-1000W Shaft length: 508mm(Suitable for ships with stern plate 45-55 cm) Use voltage: 48V Current: 18A No-load speed: 3000 rpm Recommended ... morebattery: 48V100A Product weight: 10.5KG Power: 1000W Speed: 15 KM /H Gross weight / net weight: 10.5KG/13KG Start key: NO Reverse gear: NO.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification Color: Black Style: Modern Condition: New Material: 600d Oxford Cloth Vehicle Service Type: Boat Applicable Outboard Motor: 15-20hp Cover ... moreCircumference: 1.5m/ 4.92ft Cover Height: 1.25m/ 4.1ft Package Size: 20*20*5cm/ 7.87*7.87*1.97in Net Weight: 0.35kg/ 0.772lbs Gross Weight: 0.4kg/ 0.882lbs Package Included 1* Outboard Motor Cover 1* Storage Bag.
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Pfankuch Maschinen Machinery. Model # : SM75 004330. From Pfankuch ES-450 Hole Punch. Servo Motor. If you do not have an account No Worries! Maple Grove, ... moreMN 55369. 9472 Hemlock Lane N. The Original Manufacturer's warranty does not apply.
Buy It Now
Free Shipping Condition: New Location: China Maximum power: 2000W.
Buy It Now
Free Shipping Condition: New – Open box Location: Framingham, United States HB Stepper Motor Catalog 2 Phase Hybrid Stepper Motor 16HY series-Size 3 9mm(1.8 degree) Wiring Diagram: UNI-P OLAR(6 LEADS) BI-POLAR(4LEADS) Electr ical ... moreSpecifications: Series Model Ste p Motor Rated Phase Phase Holding A ngle Length Current Resistance Inductan ce Torque (deg) (mm) (A) (ohm) (mH) (N.cm Min) 16HY.
Buy It Now
Free Shipping Condition: New Location: China The gear reducing speed control motors can be installed either in horizontal or vertical way. They have high strength alloy die-casting molding shell ... moreof motor and reducer; more bearable precising auto NC machine. The fittings of the motors-digital) speed reducer. Bracket-are also provided. Product Name: Single-phase AC Speed Control Sear Motor; Rated Voltage: 110VAC; Power rate: 60W velocity ratio: 120; speed range: 2-10r/min. Shaft Dia: 15mm/h7; Total Size(exclude shaft) 90x90x195mm(W*L*H) item number£º80551290007+51220005+51230005@AX280@612 Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: 48V-72V 2000W Electric Bicycle Brushless Motor Controller for Scooter E-Bike. Suitable for electric bicycle & scooter,Mechanical or electric ... moreforklift etc. Fits for 8 wires (3 phase-cables & 5 hall-cables) DC brushless motors. Specifications: Voltage: 48-72v Power: 2000W Phase Angle: 60/120 ° universal Specification: 23x10x6cm Function: cruise function, shift function, anti - theft function, reverse function, anti - flight function Package Included: 1 x Motor Speed Controller Note:This item is designed as a soft start mode, and it does take 1-2 seconds to start, otherwise it will be easily damaged.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Items Description 1.Features (1) Strong power, Low energy consumption and Long service life because of the pure copper core brushless motor (2) Omni-directional ... morerotary joystick (3) Anti-winding function when Increase the thickening of the propeller (4) Aluminum alloy suspension bracket: 90° rotatable bracket, more stable and durable. (5) Easy to install, the motor can be mounted on board without any tools Be as one with the silent world with this Genuine outboard motor. With huge thrust, a super-strong shaft and speed control, it will put the bait just where it needs to be without the fish ever knowing you're there. With super-low power consumption, the Genuine gets the most out of your 48V battery. Suitable for smal.
Buy It Now
Free Shipping Condition: New Location: Chino, United States APPLICATION This motor is suitable for all kinds of small boats, rubber boats, Submarines, aluminum alloy boats, and motorboats. This motor can also be ... moreused in fishing, aquaculture, outdoor adventure, etc. It can produce high horsepower and thrust for your boats. SPECIFICATIONS Brand: HANGKAI Rated Power: 2200A Starting System: Switch knob Motor Type: Brushless motor Rated Voltage: 60A Rated Speed: 3000r/min Rated Current: 38A Control System: Tiller control Rod Length: 91cm/35.82in Gross Weight: 17kg/34lbs Net Weight:14kg/31lbs Total Height: 132cm/51.96in Transom Plate Height: 38.1-50.8cm/15-20in.
Buy It Now
Free Shipping Condition: New Location: United States Maximum power: 2000W.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States This governor is used for DC brushed motors. not suitable for DC brushless motor speed; can not be used as a regulator or regulator! The motor can be ... moredivided into positive and negative. When the running direction is inconsistent with the expectation, the direction can be changed by adjusting the line sequence.
Buy It Now
$2.78 Shipping Condition: Neu Location: China Model: ZS-X4D. OLED LED&RGB. Nano Sheild. PWM duty cycle: 1%-100%. PWM frequency: 12khz. DC brush motor governor X1. Am 01.06.2022 hat der Verkäufer die ... morefolgenden Angaben hinzugefügt Applicable LED dimming.
Buy It Now
$8.23 Shipping Condition: Used Location: Fitchburg, United States Yokogawa DD Servo actuator. Suffix -005-6869/CE. NO SE OFRECE NINGUNA GARANTÍA para los artículos consumibles y las piezas de desgaste que forman parte ... morede los artículos más grandes; p.ej. NO SE OFRECE GARANTÍA en caso de transbordos.
Buy It Now
Free Shipping Condition: New Location: China 1 PC Wantai Stepper Motor Driver DQ2522MA, 110-220VAC, 5.0A, 200 Microstep. Stepper Motor Driver Our Stepper Motors are used on small to mid-sized CNC ... moremills or milling machines, CNC lathes, Pick-n-place machines,Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fits for 8 Wires (3 Phase-cables & 5 Hall-cables) Dc Brushless Motors. Function: Cruise Function, Shift Function, Anti - Theft Function, Reverse Function, ... moreAnti - Flight Function. Phase Angle: 60/120 ° Universal.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Model: DD-48V-1000W Shaft length: 508mm(Suitable for ships with stern plate 45-55 cm) Use voltage: 48V Current: 18A No-load speed: 3000 rpm Recommended ... morebattery: 48V100A/3-4H Product weight: 10.5KG Power: 1000W Speed: 15 KM /H Gross weight / net weight: 10.5KG/13KG Start key: NO Reverse gear: NO.
Buy It Now
$25.00 Shipping Condition: New Location: Chino, United States It can be widely used in water sports, water tourism, fishery production, and other fields. This is a stable and powerful four-stroke outboard engine. ... moreThis outboard engine features a high-precision intake and exhaust system that significantly improves the fuel transfer rate.
Buy It Now
$10.00 Shipping Condition: New Location: Chino, United States Description This electric outboard motor is made of high-quality aluminum alloy material, which is the best choice for you to enjoy your cruise. All you ... moreneed to do is install it in the stern of your boat, and you can enjoy a fast and easy-to-operate water journey! Specification Color: Black & Silver Material: Aluminum Alloy Voltage: 48V Power: 1000W HP: 5HP Rotating Speed: 4800rpm Driving Speed: 12km/h Gear Ratio: 3:2 Starting System: Switch On Tilt System: Manual Tilt Operating System: Steering Handle Power Display: Not Include Gear Position: Infinitely Variable Speed (Reverse Gear, Forward Gear) Cruise Control: Yes Adjustable Height Range: 20-50cm/ 7.87-19.69in Recommended Gear Oil: Hypoid Gear Oil SAE # 90 (Not Included) Recommendation for Battery Models: 48V Battery.
|
|
|
|
~~Cushman Husky Engine~~ Vintage Scooter Motor w/Spark and Compression~~
This auction is for a Cushman Husky engine with the Model# 200M8-5 1. On the tag is written Bore 2 7/8 and Stroke 2 3/4. This engine has spark and compression. But I don't know if it is missing any parts. Please look closely at the photos to determine if it is complete. I only sell to the US and paypal only. THANKS FOR LOOKING~
|
|
|
Cushman motor works brass engine tag, hit and miss
Nice old Cushman brass engine tag. It measures 3 x 1 1/2 inches and is for the model C. 4hp and the serial number stamped is 44415. Shipping is free in the states.
|
|
|
Siemens 3PH Elevator Motor Starter 72KV34AFA
Siemens 3PH Elevator Motor Starter 72KV34AFA Quantity Available: 2 Shipping Weight: 16 lb. AEB 203 1.1.C L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional ... morecharge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(
|
|
|
Antique Vintage Maytag Hit & Miss Engine Washer Motor Farm Motor Wisconsin
I have a antique Maytag engine that when I pulled it out of dads shed had it running but now I cant get it going and seems to have no spark. I will leave it up to the experts to repair. It does have good compression. Looks like compared to my other one that it is missing the ground shut off. carb or intake round cover. I will let you be the judge by looking at the photos as I am no expert in this area. Must have had it painted at one time as it is very clean. I don't know the model number so please ask questions you may have before bidding. Cool piece from the past. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14133174f71-0xf7-
|
|
|
LAUSON ENGINE SHROUD WITH TAG RSH - 746 523895 HIT MISS MOTOR PART
LAUSON ENGINE SHROUD AS SEEN IN PICTURES
|
|
|
STARITE 3 Phase Pump Motor P48J2EB7 3/4 HP 3450 RPM
This is a used fully operational A O Smith Sta-Rite motor It has about 3 feet of wire attached. All items are described as completely and accurately as possible but are sold'as is' and'as described' Please ask questions before bidding especially about parts you may be aware of but that are not listed or pictured. FREE SHIPPING WHEN OFFERED IS FOR USA ADDRESSES ONLY I will ship with in 1- 2 Business Days after your payment is received. We use USPS and UPS for shipments. You will receive an e-mail with shipping and tracking number details when your item is ready to ship. We do our best to keep our packaging and shipping costs as low as we can but please remember that making sure your purchase arrives safely is important to both of us. Combined shipping is available on all items. E-mail me for a price before bidding please. INTERNATIONAL ... moreBUYERS We are pleased to ship internationally but please note the following conditions- E-mail for postage costs before bidding. Items that sell for over US$25 will ship Express Mail Insured- Any import duties or taxes are buyers responsibility Please check out. CHECK MY FEEDBACK- BUY WITH CONFIDENCE! Follow me on Facebook SOMERSET HOUSE or Twitter nick_ebay Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
**Landscapers** Toro Dingo 322 with Brand New Motor 2.5 HRS**
Landscapers* Toro Dingo with Soil Cultivator& Bucket Attachment New Moto 2.5 HRS* You are bidding on a Toro Dingo 322 track over wheel model. The unit includes a soil cultivator with leveler and bucket attachment(not pictured) I used this piece of equipment for 2-seasons prepping areas for new sod installations. Brand New Kohler 23 HP Motor with 2.5 HRS, New Toro Ignition, Two new tires, 2 New Needle Valve Assembly's, 1 New Hydraulic Hose, Unit is in great working condition. It has normal wear and tear. But is mechanically sound. If you are near, you are welcome to come see it in person. Please email for more pictures or video of the equipment working. Thank you for your time!
|
|
|
C103821 Levitronix Semitool BSM-4.1 Pump Motor (Input: 325V/900W, Output: 750W)
C103821 Levitronix Semitool BSM-4.1 Pump Motor(Input: 325V/900W. Output: 750W) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C103821 This Levitronix Semitool BSM-4.1 Pump Motor looks to be in very good cosmetic condition. And appears to be unused. It comes in its original Levitronix box. However, I have no way of testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 14"L x 11"W x 13"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $53.00(for DOMESTIC shipments only- 48 contiguous ... morestates excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 34.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County. The current basic state
|
|
|
C103820 Levitronix Semitool BSM-4.3 Teflon Pump & Motor
C103820 Levitronix Semitool BSM-4.3 Teflon Pump& Motor(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C103820 This Levitronix Semitool BSM-4.3 Teflon Pump& Motor looks to be in very good cosmetic condition. Possibly unused. However, I have no way of testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 10"L x 10"W x 9"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $50.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international ... moreshipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 33.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County. The current basic state tax rate applies. Orders will be placed on hold for non-pa
|
|
|
HP 5100 LaserJet Printer Motor RH7-1427 01 C20310
Item Description: Included in the Sale: Motor RH7-1427 01 C20310*All our products are cleaned inside and out(if applicable) Tested(if applicable) inspected and packed professionally* Positive Feedback: We appreciate your positive feedback. In case you have any problem with our products please contact us. Customer satisfaction is our goal. We leave positive feedback to our buyer right after their purchase is complete. Shipping: We ship within 4 business days after clear payment. We ship ONLY to the lower 48 states of the United States. We do not ship to Hawaii. Alaska. For products over 150 lbs. Buyer arrange and pay for the freight charges. Return&Warranty Policy: We accept returns within 7 days. As long as the item is in its original shipping condition, including all parts, and in its original packaging. Money back guarantee is upon ... moreinspecting the product for its original condition. And its original packaging. We charge 15% restocking fee. Buyer pays all shipping& handling charges. Laser Printers have 30 days replacement warranty if available in stock. Or refund if we do not have a replacement. Usage Safety: We are not responsible for the misuse of the product(s) that may cause damage to the product or injury to any person. Buyer is responsible for checking the product(s) website. For usage and safety instruction. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MAYTAG ENGINE MODEL 92 M SHORT BASE RUNNING HIT MISS SINGLE CYLINDER MOTOR
FLEA MARKET FIND- MEAN GREENED IT AND RINSED IT OFF- W-D 40 DED IT TO STOP RUSTING WIRE WAS MISSING- PUT ONE ON AND GOT FIRE- PLUG WAS BROKE AND PUT NEW ONE ON IT OLD PLUG HAS" MAYTAG" ON IT- BOTH PLUGS AND WIRE WILL BE INCLUDED RINSED OUT TANK AND PUT FUEL IN IT AND SPUN THE FLYWHEEL WHILE THUMB CHOKING IT- KICKED BACK ONCE- MOUNTED IT ON A BENCH AND PUSHED THE PEDAL DOWN- IT STARTED RIGHT UP- SOUNDS LIKE A GOOD RUNNING ENGINE AS SEEN HERE http:youtu.be/CkkZezoxtu0 KICK LEVER BRAKE SCREW AND SPRING MISSING. NO KILL SWITCH WAS HAPPY TO FIND THIS ENGINE IN SUCH GOOD CONDITION- NOW WILLING TO PART WITH IT WOULD LIKE TO KEEP BUT HAVE TO MANY PROJECTS GOING AND PLENTY OF 92 ENGINES AS IS A GOOD PROJECT FOR SOMEONE WHO WANTS TO PRESERVE OUR PAST- WHICH IS WHATS ITS ALL ABOUT AND THE FUN OF LISTENING AND WATCHING THEM RUN- ESPECIALLY ... moreWHEN YOU REDO IT YOURSELF ALREADY RUNNING- JUST DISSASEMBLE- CLEAN. PAINT TO YOUR HEARTS CONTENT, GASKETS AND REASSEMBLE- OR LEAVE AS IS AND PASS IT ON TO FUTURE GENERATIONS
|
|
|
briggs & stratton WMG generator motor vintage gas engine hit n miss antique old
Vintage briggs& stratton model WMG gas engine. serial 7536 model 20501 built in march of 1938. starts easy and runs good. sold asis Please read\ before bidding 1) This item is used not new. Unless otherwise stated. Please look at pictures and read description. This Item will be shipped with insurance, unless otherwise stated. E-mail me with any questions before bidding. I do not need bad feed back or complaints from bidders that bid on used and expect new. Also don’t bid for someone else I don’t need bad feed back for something they did not see. All sales are final. No returns, and sold as is! 2) I must get communication on method of payment within 24 hours and payment must be received within 5 day or item will be relisted. 3) feed back is an important part of the ebay system but if you don't wish to give me feedback I won't give ... moreyou feedback. 4) I can give a close estimate of shipping cost. Please ask. I do not need complaints after you have won the item. All I need is your zip code. I do not ship to P.O. boxes! I ONLY SHIP TO CONTINENTAL US! Due to my work schedule I ship paid for items on the fallowing weekends. 5) There are absolutely no refunds on the engines I sell. This one included. Also there is no guarantee that the engine will run when you receive it. This engine have been run and tested, and ran when it left here. I don't have any control over what you put in the gas tank or in the crank case. This engine needs to be filled with fresh gas engine a good grade of oil. SOLD ASIS ALL SALES ARE FINAL!
|
|
|
Maytag 72 Multi Motor Hit & Miss Engine Washing Machine Wico Mag Magneto
Here is a nice original Maytag 72 twin cylinder engine. It is loose and has compression. I have not tried to run it nor have I checked it for spark. Please ask questions prior to bidding. Payment by PayPal only within 3 days of auction end. If you would like to discuss anything about the engine feel free to call me at(309) 275-6941 before 9pm Central time. Thanks and happy bidding! Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14133e28415-0xff-
|
|
|
GRACO GH200 HYDRAULIC AIRLESS W ELECTRIC MOTOR.... Reduced!
GRACO GH200 HYDRAULIC ELECTRIC AIRLESS PAINT SPRAYER I HATE TO PART WITH THIS FANTASTIC MACHINE BUT BUSINESS IS SLOW IT WAS REPACKED AND HAS SPRAYED ABOUT 200 GALLONS SINCE IT WORKS PERFECTLY AND IS GREAT FOR HIGH PRODUCTION 1.1 GPM- MAX TIP.031(1 GUN) 017(2 GUNS) GREAT FOR TWO GUN SETUPS- YOU WONT BE DISAPPOINTED. WILL INCLUDE NEW 50' HOSE AND A GRACO GUN- HOUSING- TIP LIST PRICE IS $7200 SALE PRICE IS $4500-$4700 HAVE MINE FOR $2100 BIN AND FREE FREIGHT SHIPPING 227 bar. 4.75 l. 128 bar. 5.5. 9.8 lpm.
|
|
|
SPRAGUE & HENWOOD HYDRAULIC TOWABLE CORE CORING DRILL w 30 hP WISCONSIN MOTOR
SPRAGUE& HENWOOD HYDRAULIC TOWABLE CORE DRILL w 30 hP WISCONSIN MODEL-B2 SERIAL-286 THIS IS A TOW BEHIND CORING DRILL. IT IS POWERED BY A 30 HP WISCONSIN AND HAS A LOW 959 HOURS ON A WORKING COUNTER. THIS WAS A CITY UNIT AND IT HAD TROUBLE STAYING RUNNING. WE REPLACED THE NEEDLE AND SEAT IN THE CARBURATOR AND IT RUNS LIKE A DREAM. THE CITY'S LOSS IS YOUR GAIN. THIS UNIT RUNS LIKE IT HAS UNDER A THOUSAND HOURS. EMAIL ME FOR A VIDEO OF IT RUNNING. THERE IS A SLOW LEAK ON THE FRONT TIRE THAT I AM HAVING FIXED. THE MAIN TIRES ARE AT 80% OR MORE. IT HAS HYDRAULIC RAMS THAT LIFT THE ENTIRE MACHINE OFF THE GROUND. SIDE SHIFT, THE DRILL GOES IN EITHER DIRECTION AND HAS 4 SPEEDS. WE GET GREAT RATES ON FLATBED SHIPPING.EMAIL ME FOR A QUOTE! WE SHIP ANYWHERE IN THE WORLD! ALL emails received after 5pm MST will be answered the next business day. ... moreTherefore after 5pm on friday will be answered monday morning. No auctions will close on the weekends, but if you would like an answer about an auction please email us ahead of time.Thanks! Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. Most of the items sold on this page are surplus items from government auctions or bankruptcy sales. If the description does not say"New" then you are to assume it is a preowned item. We try to power up every item. But much of the time do not have the means to test items, therefore unless otherwise stated items are sold"as-is" You are welcome to email any questions and if we have the capability to answer we will. We are an ebay business and are committed to excellence in service and fairness, if we are aware of something wrong it will be stated. PAYMENT& SHIPPING Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. 1. Unless arrangements prior to auction close are made. All items will be shipped FED EX Ground Insured Delivery in
|
|
|
Original Maytag Gas Engine Motor Model 92 31 11-111 Single Hit Miss Flywheel
Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being spent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Zach Part: Model 92 31 Flywheel. Condition: original. Description: Original Flywheel for the Maytag model 92 or 31 single cylinder engine. You will get what ever serial number ... moreis next in the stack. Need a certain serial number range? Contact us! Questions? Call(712) 490-5596 Warrantee: I dont warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want todo. I dont offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every one is the same. What works on one might not work on another. So with that in mind we will do what it takes to fix your engine and make you happy! No one else on Ebay with Maytag parts says that. BUT That is what I will do! You have my word!
|
|
|
Ford tractor remanufactured water pump DIFZ 8501 A 70hm8505r01 engine motor part
This is the water pump for a Ford tractor. It is a remanufactured original Ford pump. the casting number on the pump is 70hm8505r01. The number on the box is DIFZ 8501A. Any questions feel free to email. Thanks. BUYER'S NOTE All the items we list the exact year and model the part was removed from. We make mistakes and sometimes the parts may have been changed over the years and could have come from a different year or model. We try to list the years and models as best we can with the information we have for interchange between models. But for your own sake if the part does not look correct to your application research before bidding. Please do not wait till you receive the part and come to the conclusion it is the wrong part and expect to be reinbursed for return shipping costs. We also offer for added fees your part can be blasted or ... morepowder coated and ready to install once you receive it. Email for a price quote. CHECK OUT OUR EBAY STORE FOR MORE GREAT DEALS ON CLASSIC USED PARTS! SHIPPING INSTRUCTIONS: FOR A ACCURATE QUOTE THE BUYER'S ZIP CODE MUST BE ENTERED IN THE SHIPPING DETAILS. WARRANTY INFORMATION: NO WARRANTY IS WRITTEN OR IMPLIED ON ANY USED PARTS WE SELL. ALL PARTS ARE SOLD AS IS WITH NO GUARANTEES WRITTEN OR IMPLIED. PLEASE NOTE THAT SOME ITEMS WE HAVE IN STOCK MAY NOT BE THE SAME AS THE ONES PICTURED DUE TO HAVING DUPLICATES. WE TRY AND POST A PICTURE OF THE WORST ONE WE HAVE IN STOCK SO THE ONE YOU RECEIVE IS IN BETTER SHAPE MOST OF THE TIME IF IT IS A DUPLICATE. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1979 DO-ALL C-1216A, Horizontal Band Saw w/ 2 HP Hydraulic Motor - ID#100930
1979 Do-All C1216A Horizontal Band Saw ID# 100930 INSPECT UNDER POWER AT OUR DUNDEE. FL FACILITY SPECIFICATIONS Maximum Rectangular Part(90º) 12" x 16" Diameter of Band Wheels- 16" Flat Material Capacity- 15" Work Height- 30" Blade Size(W x L x H) 1.5" x 16'2" x 0.35" Band Speed(Infinitely Variable) 40 to 450 RPM Motor Horsepower- 5 HP Hydraulic Motor- 2 HP Machine Dimensions(L x W x H) 90" x 108" x 72" Machine Weight(Approx. 2.500 Lbs EQUIPPED WITH Roller In Feed Table Roller Out Feed Table Hydraulic Band Tensioner Hydraulic Head Elevation Dual Hydraulic Vises Auto Cycle Operation Chip Auger PAYMENTS ACCEPTED Paypal. For other payment options please contact Christina Ferguson at(863) 353 2693 or Toll Free at(855) 827 1387. We have the right to resell the item if it is not paid ... morein full within(10) days. SHIPPING This machine is sold FOB"Buyer's Truck" All machines MUST ship on an Air-Ride Equipped Trailer(completely covered with tarps) We are more than happy to assist you in making arrangements to pick up your item. Please contact us for shipping& rigging quotes at(863) 353 2693 or Toll Free at(855) 827 1387. Shipping Dimensions Machine- 108" x 90" x 72" Pallet- 42" x 20" x 32" Item will ship from Dundee. FL 33838 WARRANTY This machine is sold with a"START-UP GUARANTEE" In order to qualify it must be shipped on an Air-Ride Equipped Trailer and covered 100% with tarps. It MUST be put to power by a"qualified technician" within(5) Days of delivery. If these stipulations are not met then warranty is null and void. All costs involved to return the item is the"Buyer's" responsibility. If you have any questions or concerns regarding this listing please contact us at(863) 353 2693 or Toll Free at(855) 827 1387. STANDARD TERMS& CONDITIONS OF SALE 1. Unless otherwise stated in this agreement. The equipment is sold"AS IS, WHERE IS" with all faults and defects, known a
|
|
|
EUC Robbins Myers Type R 1/10 HP Electric Motor 2 Torin Cassville Blowers HVAC
Up for sale is a Robbins Meyers and Torin-Cassville Combo Set. The Robbins Meyers Electric Motor is marked as follows; T. P. Type R B-1 INS 115V 1PH 60HZ 1625RPM 1.45A 1/10HP Cont 8-10MFD Cap IBM P/N 1295866 EC 775885U KP-K330-Aots 1833141006 The two Torin Cassville Blowers are marked as follows; SC306-W6428-2 1295852 EC775877J CF87. The frame that these items are on is marked 1297809 EC 774309 S33000 7/87. This item is in Like New Condition. The only thing that looks second hand is the vent attachment on the one blower. The gasket between the blower and the vent has gotten soft and sticky. It is untested. Very nice and clean. Looks great! Place your highest bid now so you don't forget and miss out! Buy with confidence. We are Top Rated! Please check out our other electric motors and components in our store. Now and more to come over ... morethe next several weeks. Make sure to save us to your favorites. I ship within 1 business day of payment. Please take a look at my other items up for sale. I discount shipping on multiple purchases! Thanks for looking and please feel free to ask questions! I do ship internationally. Customs fees are not included. No returns on international orders.
|
|
|
Vintage Antique Lauson RSC-664 Engine Motor & Barnes Water Transfer Pump
A good old engine and water pump that needs a new home. It came straight from a old farm estate sale. It turns over and is not stuck. No spark when turning it by hand.The tank is clean on the inside. Maybe you can get this one running! It weighs 60lbs without packing! Look at the pictures good and email with any questions before bidding. Sold as is. Will combine on shipping. Thanks for looking! Shipping by fed ex. No PO boxes! I sell mostly used or vintage items. Returns will be only accepted if item is grossly misrepresented.
|
|
|
antique Reo small gas engine motor with unusual pulley attachment
Used Reo brand antique small gas engine/ motor. Found it in the back of my Dad's shed when cleaning up an old junk pile. Seems to be complete except for the gas cap and the nut that holds the ropestart pulley on. I believe the gas tank bracket is homemade. It seems to have been repainted at some point as well. Motor turns over with pretty good compression. I have not tried to start it. The interesting part of this unit it that the power side of the motor has a housing attached that changes the pulley from vertical to horizontal. And it looks like the ID tag has had additional info stamped on it(maybe to indicate a factory addition of the pulley housing, but that is just my suspicion) Dad does not recall ever seeing the unit or using it on the farm. No idea where this came from or how old it is, but I would guess 50s or early 60s. I believe ... morethe ID info on the tag says: REO 660 HR27 H102897X The HR27 appears to have been hand-stamped after the main data was already there. This is a no-reserve auction with a $1 start fee. This motor WILL sell to the highest bidder of this auction! My plan for shipping is to encourage pickup if possible. But if that does not work, I can build a plywood crate and ship it out via UPS ground. I am throwing out a wild guess on the freight cost so I am sorry if that seems high. Obviously, if you can pick it up, I will cancel the shipping costs. I will ship to lower 48 US States only. Other locations make this sale impossible due to unknowns in shipping. Please pay via Paypal within 3 days of the end of the auction. I will ship within 48 hours of receiving payment.
|
|
|
Maytag Multi motor model 31 washer 1920's hit miss engine
Antique 1920's model 31 Hit Miss Multi Motor Maytag Washer. Engine compression good motor turns. Will sell as a whole or parts out. Local Pick up or shipping agreed to as parts are shipped
|
|
|
15 Amps Breaker Cutler Hammer with Westinghouse Motor Controls
15 Amps Breaker Cutler Hammer with Westinghouse Motor Controls. This is used and in good condition. Free shipping in the continental US. Posted with
|
|
|
CALPEDA 3PH MOTOR PUMP 220/380Y 3480RPM 7.8/4.5A NM25/160A NM 25/160A
CALPEDA MOTOR PUMP TYPE: NM25/160A V: 220/380 3480RPM A: 7.8/4.5 Condition: NEW. In box NEW. No box NEW. Old inventory USED. But in good working condition. X USED. But in good working condition. Nicks& Scratches. AS-IS. No warrantys no refunds. DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE ... moreAND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast. Easy, and secure way to pay online
|
|
|
Goulds SS Centrifugal Pump Emerson Motor 3Ph 1HP P63FYH
These pumps were removed from a dialis center. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14134dd3ff9-0x104-
|
|
|
STA-RITE Signature 2000 1/2 hp 10gpm submersible well pump and motor
Up for bid is a Sta-Rite Signature 2000 Stainless steel 1/2hp 10gpm submersible water well pump and motor. Pump has a Pentair 230volt 1 phase motor. Pump came from a decommsion water well and was set at 110 feet. Pump was tested in my well pit and met all specs. Any further questions just contact me. Good luck on bidding.
|
|
|
Georater Model 33-002 Motor Generator, 3.5KVA 220/440Vac/3Ph/60Hz, 115Vac/ 400Hz
General Description This is a used item These larger Brushless Permanent Magnet Generator(Alternator) provide a clean. Reliable source of nominal 400 Hz power. Inherent regulation provides excellent voltage and frequency stability. Exceptional MTBF with minimal maintenance. Quiet operation. Georater Model 33-002 Motor Generator 3.5KVA(2.8KW) 220/440Vac/3Ph/60Hz Input 115Vac/400Hz Output Manufacturer Specs FREQUENCY CONVERTER SPECIFICATION GEORATOR CORPORATION MANASSAS. VIRGINIA 20110 Revision Letter Date Revision Description ENGINEER M.T.E. APPROVED BY April 20. 1998 Model No. 33-002 Type 22-A Vertical Frequency Converter 1.0 INPUT: 1.1 Motor. Rotor& Stator: Reliance, Frame 254-T, Georator P/N 18-309: 5 H.P. 3 Phase, 60Hz, 220/440V(+/10% 1760 RPM F.L. 1.2 Input Current: 15.2/7.6 Amperes 1.3 Insulation: Class B 1.4 Max. Ambient Temperature: ... more50 Degrees C 1.5 Duty: Continuous 2.0 OUTPUT: 2.1 Rating: 3.5 KVA. 100% PF, 1 Phase, 400 Hz(Nom. 115V(Nom. 2.2 Output Voltage: No Load: 1224 +/1V 2.3 Output Frequency Tolerances: 420 Hz N.L. to 410 Hz Min. F.L. 2.4 Voltage Regulation: 10% Max. 100% P.F. 2.5 Output Current Rating: 30.4 Amperes 2.6 Insulation: Class B 2.7 Max. Ambient Temperature: 50 Degrees C 2.8 Dielectric Strength. Winding to Frame: 1500V for 1 min. 3.0 VIBRATION: Within 0.0015 4.0 BEARINGS: Shielded Life Time Lubricated Motor Bearings 5.0 FINISH: 5.1 Primer: Alkyd. Red Iron Oxide Per Fed. Std. TT-P-664D 5.2 Paint: Silver-Blue Enamel APPROX. WEIGHT: Shipping: 500 Lbs. Local pick up allowed. I will help you arrange shipping. Can deliver for a fee. But you MUST have a forklift or some way to remove it from the truck/trailer. Generator is strapped to a 40 x 48 pallet for shipping. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
State And A.O Smith Water Heater Motor Assembly 184955-002 Universal JB1R117NSW
Description For sale is a State water heater inducer powervent assembly. It is in good condition and has been tested. It was removed from a water heater that was replaced because it was leaking. We will ship it ASAP after the payment clears. Thanks We gladly accept Paypal and Paypal echecks. We can also run your credit card over the phone with the Paypal Here Service. If you do not have a Paypal account. Payments are due within four days of the auction close. Unpaid items will be handled through Ebays unpaid items system. Orders will be processed ASAP. Normally the same day of cleared payment. Orders will be shipped through USPS or UPS and tracking information will be available immediately. Overnight delivery is available at an additional charge and should be arranged before purchase. Items can also be picked up in Cincinnati, Ohio 45251. ... morePlease contact us to make these arrangements. Free shipping is only for customers located within the United States. We do our best to ensure the accuracy of every listing. If you receive an item that is not as described in our listing. Please contact us directly via the Ebay message system and we work to correct the issue. We offer a(14) day money back guarantee on all items. Returned items must be shipped back at the buyers expense and received in the same condition. UnitedHvacParts has been conducting business on Ebay for several years and we have many satisfied customers. We do our best to take care of our customers and answer any questions in a timely manner. You may contact us via Ebay message system Posted with
|
|
|
THERMAL HEAVY DUTY TWO STAGE DEEP VACUUM PUMP 1/3 HP MOTOR MODEL 1825Z
THERMAL HEAVY DUTY TWO STAGE DEEP VACUUM PUMP 1/3 HP MOTOR MODEL 1825Z Click Images to Enlarge THERMAL HEAVY DUTY TWO STAGE DEEP VACUUM PUMP 1/3 HP MOTOR MODEL 1825Z 3.2 cfm 1.725 RPM MOTOR 60 HZ 115 VOLTS MEASURES: 17" x 8" x 17" weight: 30 lbs NO PAYPAL FOR WILL CALL ITEMS ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 32 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items ... morebetween 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt
|
|
|
FABY, Cab Slushy, Granita Machine Gear Motor
One FABY. Cab Slushy, Granita Machine Gear Motor. Works great. Came out if working machine. Posted with
|
|
|
Carrier Bryant 326023-401Inducer Blower Motor Kit
Used and removed from a working furnace this item is in great working order Posted with Posted with
|
|
|
(2) Quatro Automation Servo Motor 210-2019-001
2) Quatro Automation Servo Motor 210-2019-001 Excellent cosmetic condition. Guaranteed to be working perfectly. NO 3rd party shipping on buyer accounts California residents must pay 8.5% Sales Tax. Businesses purchasing for resale must provide CA state tax ID information. Payment is due within 7 days of auction's end. Buyer pays for shipping SEE BELOW. When possible. Multiple items will be shipped together to reduce shipping costs. Insurance for the amount of the auction is included in the shipping price. Flat fee shipping amounts apply to lower 48 states ONLY! OVERSEAS BUYER PLEASE CONTACT ME REGARDING ACCEPTED PAYMENT METHODS BEFORE MAKING A PAYMENT. If you need additional information or have any questions. Please contact me BEFORE placing your bid. International Buyers- Please Note: Import duties. Taxes, and charges are not included ... morein the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Listing created with from Black Magik Software.
|
|
|
Getech RAMPS1.4, Iduino Mega 2560,5×A4988 Motor Driver,3D Printer,Reprap,Arduino
ebay Items Description Are you still annoyed without a kit for your excellent experiment idea? Here's the chance! We offer a full set of experiment equipments for you. 1.Iduino Mega 2560. Iduino Mega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I/ O input/ output terminal(14 groups do PWM outputs) 16 sets of simulation than the input side, group 4 UARTs(hardware serial ports) using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works. ... more2.RAMPS 1.4 extend Shield It is a Mega Pololu Shield. Or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. This board is mostly based on Adrian's Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik's work with EasyDrivers. circuit design based mostly on Adrian's Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community. 3.A4988 driver. This product is a carrier board or breakout board for Allegro's A4988 DMOS Microstepping Driver with Translator and Overcurrent Prote
|
|
|
3M GVP-100 PAPR Motor Blower For Respirators Welding Sandblasting Painting
Up for auction is a 3M GVP 100 Motor Blower I picked this up from a local estate. So I'm unsure the history of this item. Item has been tested and works perfect. Item is dirty and shows normal wear from over the years. I'll be listing other 3M Products. So be sure to check out my other listings. Message me with any questions or concerns. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14135f3a6ab-0xfd-
|
|
|
CARRIER VARIABLE SPEED BLOWER MOTOR #HD 44AE 116
ONE USED. GOOD WORKING CONDITION CARRIER/ HD 44AE 116 VARIABLE SPEED BLOWER MOTOR. SOLD AS IS. FREE SHIPPING TO LOWER 48 USA ONLY.
|
|
|
BUNN G9-2 HD, G9-2T HD, G9-2 HD-S Motor, 115V (Compatible w/ 11029.1005)
Franklin Replacement Motor for: BUNN G9-2 HD. G9-2T HD, G9-2 HD-S Coffee Grinders Compatible w/ Marathon 11029.1005 This motor is currently wired for 115 Volts. MFG Franklin Electric Model 1091270700 V 115/208-230 HP ¾ RPM 1725 FLA 10.0/5.0 HZ 60 PH 1 This motor was removed from a machine that sustained cabinet damage. It was tested before& after removal and worked perfectly. Shipping and Payment Terms We Accept PAYPAL only. Payment is due within 3 days of auction end. Items will be shipped 1 to 2 business days following a cleared payment. Shipping excludes: Alaska/Hawaii. US Protectorates, APO/FPO, PO Box Customer Service Manufactures warranty’s vary in terms and conditions. Please familiarize yourself with specific manufacture for their warranty. Seller assumes no warranty/guarantee beyond that stated in eBay auction. If the item ... moreshipped is not as described. Message thru ebay and your purchase will be refunded less shipping when item is returned. All items must be returned as originally received and in a re-sellable condition. Please use care in packaging so that damage is not incurred in transit. We should be able to correct any issues.
|
|
|
MAZAK V-7.5 CNC INDUCTION MOTOR LUBE CORP N-02 MMX-II MMXII AUTOMATIC LUBRICATOR
ARPI MACHINE SALES. OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 OFFICE: 818 890-7625 VERY IMPORTANT! PLEASE READ. AFTER PURCHASING THIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDULENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE AND ACTION WILL BE TAKEN AGAINST THESE BUYERS ... moreTHRU EBAY POLICIES BY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION WE WILL SEPARATE IF YOU SEE SOMETHING YOU WOULD LIKE TO BUY WE JUST STRIPPED A MAZAK V-7.5 CNC VERTICAL MILL POWER CENTER MACHINE WITH MAZATROL M-1 CONTROLS. TO SEE ALL PARTS FROM THIS MACHINE PLEASE PLEASE CALL IF YOU NEED OTHER PARTS FOR IT. INTERNATIONAL SHIPPING WILL BE $100 MAZAK V-7.5 POWER CENTER PALLET 2 9/18 BK~. CALIFORNIA BUYERS TO PAY 8.75% SALES TAX SHIPPING& HANDLING: FREE SHIPPING BY UPS IN THE 48 CONTINENTAL STATES. PAYMENT INSTRUCTION: Payment can be made with paypal. Business or personal check or wire transfer. All payments must be received by Arpi Machine Sales within 7 days. Payments must be sent to ARPI MACHINE SALES at 12165 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contac
|
|
|
HILL-ROM Hospital Bed Electric Gear Motor K37XYC23607 & drive mechanism
View my Other Auctions EMAILS answered M-F 8-5 MST SHIPPING TERMS: We use UPS ground service for delivery in the lower 48 states. International customers We use USPS Priority for international delivery. International customers click here for shipping guidelines Shipping fees listed on all auctions via cost calculator for international and domestic. All packaged items include 2" of bubblewrap and/or foam if applicable. Freight Delivery: In Most cases. We will pelletize for free. Any crating would be subcontracted. We have forklift loading. We also have local pick up. For larger, heavier items customer is required to make arrangements. We can also get a freight quote for you. And/or ship on your account. If you have any questions about our freight shipment guidelines. Or to get a quote don't hesitate to contact us. Returns Policy: ... moreitems sold"as is" have no return. No warranty& no guarantee. AS IS items are not covered by return policy. These sales are final. Southwest Liquidators does not warranty the item in AS-IS auction/store in any way. No refunds. These statements maybe used as an evidence for PayPal dispute or chargeback. DOA means dead on arrival For items with a guarantee. no guarantee unless stated otherwise) items must be returned within 15 days Item must be in original shipped condition(not modified. Not missing parts) Contact us before returning any items Items that are returned more than 15 days after delivery will receive No refund. Buyer is responsible for return shipping charges if applicable. Shipping charges are directly quoted from the shipping company. Please consider these costs when intending to purchase an item. We sell mostly USED Industrial Equipment. Please email us with any questions or if the description is unclear to you. HILL-ROM Hospital Bed Electric Gear Motor K37XYC23607 This is a pre-owned HILL-ROM Hospital Bed Electric Gear Motor K37XYC23607 for advance series hospital bed. Universal Knee motor new style Hill-Rom Model Number 35000. Motor Type: Geared. Volta
|
|
|
CAT CATERPILLAR 140 G MOTOR ROAD GRADER MAINTAINER BLADE LOW HOURS MOTOR PROBLEM
CAT CATERPILLAR 140 G MOTOR ROAD GRADER MAINTAINER BLADE LOW HOURS MOTOR PROBLEM 140G MOTORGRADER PRIOR RAILROAD UNIT 140G 12 FOOT BLADE 4800 HOURS GOOD GLASS 3306 MOTOR-08Z10747 AIR DRYER ALL TIRES GOOD BUT ONE IS WORN. NEW MUFFLER 1981 MODEL S#72V05555 THE RR SHOP REPLACED THE RADIATOR RECENTLY HOWEVER THEY FORGOT TO PUT WATER BACK INTO THE SYSTEM BEFORE IT WENT OUT ON THE JOB. THE MOTOR TURNS OVER AND AN INFRAME REBUILD IS NEEDED- CAB HEAT NO AC. THIS IS A CLEAN MACHINE CALL ME WITH ANY QUESTIONS. MUST SELL MORE EQUIPMENT COMING IN. LOCATED IN SIDNEY NE 69162 NEED THEM SHIPPED? CALL FOR A QUOTE CALL TROY AT 970-466-2886 WITH QUESTIONS. call me. Troy at 970-466-2886 if you have any questions or comments. thanks for looking and good luck! we take paypal visa mc amex and discover, as well as checks or wire transfers. bid with confidence. ... morePayment is due within 3 days of end of auction unless other arrangements have been made or if payment is due upon you picking the item up. Please contact us if you have any questions. Please use checkout to pay for this item online unless you have made other arrangements with us prior to the end of the auction. FREIGHT. All sales are final unless otherwise stated in auction. All sales of large or freight items is final at all times. We cannot and do not refund any shipping fees on any auction item. All shipping costs are the responsibility of the buyer. TROYS AUTO SALES is a high volume internet dealer in Northeast Colorado. WE ARE A FAMILY OWNED BUSINESS THAT PRIDES OURSELVES ON OUR REPUTATION. We are very experienced in internet sales. And customer satisfaction is our highest priority. We have been in business for 22 years with 18 years at our Sterling, Colorado location. We have sold over 17000 vehicles in the last 18 years from our lots. Our staff is very helpful if you have any questions or concerns about our auctions. If you have any questions you are welcome to call during business hours, call me, Troy at 970-466-2886. If no answer you can call our main lot at 970-52
|
|
|
Dowmax hydraulic drive motor Sumitomo Eaton, Model: ME600AKE
DowMax Sumitomo Eaton Hydraulic Motor 12.00 Normal 0 false false false EN-US X-NONE X-NONE Dowmax hydraulic drive motor· manufactured by: Sumitomo Eaton· Model: ME600AKE· Serial: 0890437· 600 cm3 displacement. 27.5 MPa rated pres. 2620 Nm torque, 0-600 RPM· Condition: Very Good; working take-out from lumber plant closure· High torque Direct drive(no gear-reducer needed) Hydraulic ports capped. Condition: Used in good condition: Hydraulic connections sealed for protection. Removed from service due to plant closure(working take-out) Please call or email for details and for shipping quotes. 541) 942-1277 Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Char lynn Core Drill Motor Hydraulic Hilti Husqvarna Flush Face
Lightly used good condition. Posted with Posted with
|
|
|
Cutler Hammer 150AMP 3-POLE Series C Motor Circuit Protector, HMCP150U4C
Cutler Hammer 150AMP 3-POLE Series C Motor Circuit Protector. HMCP150U4C Used. But in clean condition as shown in the pictures. These were pulled from a clean, sealed industrial unit. Guaranteed not DOA Features: Convenient dial adjustment allows the user to select from 8 different current levels for precise motor circuit protection. High short-circuit current ratings can be achieved without the need for fuses or additional limiters. Reducing both space and spare parts requirements. Motor inrush trip suppressor allows the starting of high efficiency motors without sacrificing sensitive levels of short-circuit protection. Clears low-level faults(the most common type of fault in a motor circuit) more effectively than fuses. Preventing faults from cascading and damaging equipment. Easily test without having to replace the device(unlike fusible ... moredevices) by depressing a push to trip mechanism on the cover. Specs: 150AMPS 600VAC- 250VDC 3-POLES 8 Instantaneous Trip Settings- 750-2500 AMPS. All pictures contained in this auction are of the actual item up for auction. Click on the pictures to enlarge them to full size. 02* Contact information: Our contact information will be provided to the high bidder upon auction completion including our address and phone number. If you are having email problems. It is possible that our email is being stopped by your spam filter. Make sure you check your ebay registered email. Our software, Ebay's Blackthorne Pro uses your ebay registered email address for communication not Ebay messaging. If you cannot locate the email from us, use ebays"Find Contact Information" on the Advanced Search page to get our phone number so you can call us to let us know you are having a problem receiving email. We are available Monday, Wednesday and Friday for phone calls. This is an internet based business, so the majority of our communication will be done through email and ebay messaging. Payment: We accept payment through PayPal from US and Canadian account holders with a confirmed PayPal a
|
|
|
3 phase 1/2 horsepower lathe motor
This is a heavy duty. Industrial lathe motor from a Clausing 12x36 lathe. It is 3 phase, 1/2 horsepower and 1140 or 1725 rpm. The shaft is 3/4x 2 5/8 and has a keyway. It's made by Master in the USA. Add a VFD and there's no better option for powering your lathe or other machine. Tested good and ready to work. It's big and weighs about 40 lbs. If you have another shipping preference, let me know before you pay and we can work something out, or personally pick it up.
|
|
|
GENERAL ELECTRIC 5KH33FN85G AC 1/3HP 115V-AC 3450RPM 48 1PH MOTOR D248824
Brand: General Electric Condition: Refurbished Model: 5KH33FN85G Type: AC Power: 1/3 HP Voltage: 115 V-AC RPM: 3450 RPM Frame: 48 Phase: 1 PH Weight: 12.30 lbs Dimensions: 10 X 9 X 6.50 SKU: D248824 Category: Electrical· Electric Motors Additional Notes: 1/2IN SHAFT
|
|
|
US MOTORS E190W11W272R015F R713W12W308R020F 3.33:1 GEAR 2HP MOTOR D248860
Brand: US MOTORS Condition: Refurbished Model: E190W11W272R015F R713W12W308R020F Type: Gear Power: 2 HP Voltage: 230/460 V-AC RPM: 1725 RPM Frame: 5 Phase: 3 PH Weight: 41.60 lbs Dimensions: 18 X 9.50 X 10 SKU: D248860 Category: Electrical· Electric Motors Additional Notes: 7/8IN SHAFT 3.33:1
|
|
|
LEESON C4D18FK2A DC 1HP 48V-DC 1800RPM YS56C ELECTRIC MOTOR D248838
Brand: LEESON Condition: Refurbished Model: C4D18FK2A Type: DC Power: 1 HP Voltage: 48 V-DC RPM: 1800 RPM Frame: YS56C Weight: 33.30 lbs Dimensions: 14 X 6 X 9 SKU: D248838 Category: Electrical· Electric Motors Additional Notes: 5/8IN SHAFT
|
|
|
DAYTON 6Z410A 27.8:1 GEAR 1/4HP 90V-DC 1725RPM ELECTRIC MOTOR D248869
Brand: Dayton Condition: Refurbished Model: 6Z410A Type: Gear Power: 1/4 HP Voltage: 90 V-DC RPM: 1725 RPM Weight: 24.60 lbs Dimensions: 14.50 X 9 X 7 SKU: D248869 Category: Electrical· Electric Motors Additional Notes: 3/4IN SHAFT 27.8:1
|
|
|
MARATHON 1/2 HP ELECTRIC MOTOR FARM DUTY LATHE DRILL PRESS
MARATHON 1/2 HP ELECTRIC MOTOR FARM DUTY SOMEONE HOOKED UP A HOMEMADE REVERSE SWITCH NEEDS HELP TO GET IT UP TO RUN FULL. ONCE ITS SPINNING IT WORKS FINE MAY NEED A NEW CAPACITOR PAYMENT POLICY: Payment is due within 4 business days. If payment is not received, we MUST be contacted regarding your payment intentions, if you DO NOT contact us an unpaid item dispute will be filed and the item will be re-listed. ALL BUY IT NOW ITEM MUST BE PAID FOR IMMEDIATELY! SHIPMENT POLICY: We usually ship within 1 to 5 days after receiving your payment. WE WILL GIVE A SHIPPING DISCOUNT FOR MULTIPLE ITEMS PURCHASED. SHIPPING INSURANCE: We package items as well as we can, making the extra effort to ensure they arrive intact& undamaged. We can not, however, be liable for loss or damage in the mail. RETURN POLICY: We describe the items as accurately as possible. ... moreIF THERE IS ANY DAMAGE WE WILL MENTION IT IN LISTING DESCRIPTION, MANY OF THESE ITEMS ARE USED, SO YOU ARE BIDDING ON THE ITEM AS IS. HOWEVER IF WE DO MISS SOMETHING,we are only human) OR IF THE ITEM IS LISTED INCORRECTLY, WE WILL TAKE IT BACK FOR A FULL REFUND. THE BUYER WILL BE RESPONSIBLE FOR THE RETURN SHIPPING COST, WE WILL ONLY REFUND THE ORIGINAL one way SHIPPING CHARGE.
|
|
|
4 Axis Stepper Motor CNC Router / Mill Kit, Gecko G540 Include PC, spare parts
This is every piece of electronics you need to run a DIY or small CNC router mill. All these parts came off my running 2' x 4' CNC that ran flawlessly for 2 years. I upgrades to a larger machine and im parting this machine out. Please check out my other auctions for other DIY CNC Router parts. This started as this kit. List Price $675 and includes the following: 8V 12.5A switching power supply- the current you need for a 4 motor system, Gecko G540 4 axis stepper motor driver, 4 High-torque Nema 23 1/4" shaft 320 oz-in stepper motors. These are optimized for the G540- don't get caught up in the stall torque game. Since your motors don't run at stall! These motors use all of the 3.5A the G540 has to offer. 4 High-performance flexible motor cables: 2) 12' and(2) 20' cable, Additional items inclused are: Atom PC with ... moreEMC2 CNC control software installed. You can see the pc specs here- List Price $250. Dell 15" monitor- List Price $100. 1 additional High-torque Nema 23 31/4" shaft 320 oz-in stepper motors List Price $53.00. 2) 24' DB9 motor cables- list price $45. 1) 10' parallel cable(PC to Gecko 540) List price 10$. 3) 1/4" to 1/2" zero back lash motor couplers. Tehse are used to hook between a 1/2" leadscrew and the 1/4" motor shaft. List price $35$. 1) 24V 4.5 A power supply. This is a good back up power supply. Or can be used on another CNC router- List Price $65. If purchased new. All this would cost over $1200! The BUY NOW Price will include free FEDEX shipping! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14136f42890-0xf9-
|
|
|
Westinghouse A200M5CAC Nema Size 5 3PH 200/230V 460/575V 75-200HP Motor Control
You are bidding on a Used Westinghouse A200M5CAC Nema Size 5 3PH 200/230V 460/575V 75-200HP Motor Control Starter. The motor starter is a working pull and will come as pictured. Shipping to the lower 48 states will be free.
|
|
|
2909 Siemens IEC60947 VDE0660 Motor Starter
0 0 1 142 813 North Texas Surplus 6 1 954 14.0 Normal 0 false false false EN-US JA X-NONE You are Buying a Siemens IEC60947 VDE0660 Motor Starter Used. Good Condition. Sold As Is. Siemens Motor Starter Mod: IEC60947 VDE0660 Ie AC-1:40 AUI690V 2909 All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work. Only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item The item comes with what you see in the pictures. If you don’t see it you probably won’t gel it. Feel free to email me your postal code. If this would ship to a commercial or residential address, and if there is a forklift/loading dock there, and/or if a lift gate would be necessary for a total shipping and handling quote prior to bidding. The charge ... morefor freight will be determinate by the destination upon the ending of the auction. There will be a packing fee on larger and heavier items. It will be determined by the size and the care that has to go into packing an item. Thanks.
|
|
|
TACSEW CLUTCH MOTOR 121-L INCLUDING ON/OFF CONTROLS. FOR LEATHER INDUSTRIAL MACH
MOTOR CAME FROM LOCAL CHARLOTTE. NC ESTATE.MOTOR TURNS ON AND RUNS SMOOTHLY AND QUIETLY. I AM NOT A TECHNICIAN OR ELECTRICIAN AND AM SELLING THE MOTOR"AS IS" WITH NO WARRANTY OR GUARANTEE. I ALWAYS TRY TO TAKE PICTURES AND DESCRIBE ITEMS AS WELL AS I CAN. I WANT YOU TO BE HAPPY WITH YOUR PURCHASE. MOTOR IS CURRENTLY ATTACHED TO SEWING TABLE BUT WILL BE REMOVED AND SHIPPED WITH CONTROLS TO SUCCESSFUL BIDDER. BID WITH CONFIDENCE AND NOTE I HAVE 100% POSITIVE FEEDBACK FOR OVER 290 TRANSACTIONS. MOTOR AND CONTROLS MAY BE PICKED UP AT CHARLOTTE. NC AT NO CHARGE TO BUYER.
|
|
|
Industrial Sewing Machine Motor/See details/Specs/Good Working Motor
This were in local shop. They shut it down to Re-tool to DC. motor working good, when removed from machine, tested working. I ship U.S. to confirmed address, tracking included. Weight is 47 Lbs. Shipping cost is the responsibility of buying, that according to location. U.S. only. Lower 48 States. I checked Fed-Ex ground about 50.00. I will help you find cost effective shipping.
|
|
|
Singer 185J Heavy Duty Green Sewing Machine Industrial RFJ8-8 Motor Wood Cabinet
SINGER 185J Heavy Duty Industrial Strength Sewing Machine in Wood Cabinet + Accessories Just in time for Halloween Costume production as well as Holiday Gift Making! Description: This listing is for an i ndustrial strength Singer Model#185J Sewing Machine in retro Green finish with Gold lettering in the original wood cabinet with the fold out tabletop. The machine produces a straight stitch. Both forward and reverse. The Model 185 Series is one of the best machines produced by Singer as evidenced its durability and consistent buyer demand. Probably intended for household use, but built to industrial quality specifications, from the 1950s. The machine runs well and has no trouble penetrating(4) layers of denim or other heavy textiles- see the(2) stitching samples in the 1st photo. Produced on this machine last month. The Machine has been oiled ... moreper the enclosed Singer Operating Manual. Perfect for standard sewing. Mending with cottons, vinyls, denims, corduroy, etc. as well as upholstery work with heavier textiles. Included in this auction are the following items + accessories: Singer 185J Sewing Machine w/ Presser Foot P edal. Task Light + AC Power Cord, Made in Canada; Motor: RFJ8-8. 110-120 Volt AC, Made in Canada Wood Cabinet Table with hinged top(supported by retractable arm. see 11th photo) and small front drawer for scissors and thread(see 12th photo) Dimensions- Closed Cabinet: 23" wide(opens to 46" wide) x 16.50" deep x 32" high; 2) Thread Bobbins(2) Spools of Thread- White + Navy; 4) Packages of Sewing Needles: Sizes 11. 14, 16 and 18(1) Sew-Rite Precision Machine Oil Kleer-Est w/ Telescopic Spout; and(1) Singer Model 185J Owners Manual in.pdf format on a CD; with illustrations + maintenance instructions with How To information on: threading the needle; filling the bobbin; selecting the right needle and tension; lubricating and maintaining your Singer 185J sewing machine Specifications: Adjustable Stitch Length: 6-30 Stitches per inch in forward; plus Reverse; Steel Class 66 Drop In Bo
|
|
|
Caterpillar 120 Grader Cat Motor Grader Scarifier Cab
Caterpillar 120 Motor Grader S/N 14K8XX Hydraulic With Aux. Hydraulics To Rear Scarifier New Brakes in 2011 Township Owned Tires Mixed% Needs Starter& Batteries $12.500 USD Containerized in Maine, USA Best Regards. Robert Cell: 646)246-4614
|
|
|
020532 Crown 36 volt DC pump motor rebuilt
Rebuilt motor with wearable parts replaced with new
|
|
|
91097 Crown 72 volt DC motor, rebuilt
Motor has been rebuilt with all wearable parts replaced with new
|
|
|
2007 Volvo G60 Motor Grader! Only 900 Hours!
0 0 1 600 3424 Kurtz Trading 28 8 4016 14.0 Normal 0 false false false EN-US JA X-NONE Please read complete disclosure before you bid/buy or make an offer! Description Volvo G60 Motor Grader. This machine came from a contractor about 80 miles from the shop. Machine has good tires. Machine has 900 Hours w/ Factory Scafier and Factory Front Blade. Please check out Volvo for detailed specs on this tractor. No Reserve Auction When we list an item NO RESERVE this item is a trade in or an item that we are going to sell AS IS. AS IS means that we will tell you what we know about the item but we are selling it AS IS. This means we will not stand behind the item at all. Items Listed For Sale or Make Offer We do the best we can to list items to best of our knowledge but we can not guarantee all info we provide is accurate. We include serial number ... morein every listing and it is the buyer’s responsibility to assure specs and years of manufactures are correct. Because of Dead Beat ebayer’s we now require speaking to bidders personally by telephone before any offer will be accepted. We feel that there are less chances of problems and misunderstandings if we speak to the bidders and buyers before they commit to buy. What Your Buying We are selling used equipment. You should expect scratches. Dings, Dents, Faded Paint, ETC. If you are looking for perfect new equipment you need to go see the new dealer. As stated before we sell good used equipment at wholesale prices. We will always try to explain any flaws in the equipment but we recommend everyone call and ask specific questions as everyone’s opinion of used equipment is different. About Us We are a small family business that strives to provide good used equipment at a fair price. As a small business we look forward to meeting you and help you find the equipment that best fits your needs. Also as a small business we also strive to make your purchase as easy and professional as possible. Payment $500.00 Non Refundable deposit is required within 48 hours of end of the auction to
|
|
|
SEW EURODRIVE 877DT100L84BM64HF 35.94:1 GEAR 3HP 230/460V-AC 48RPM MOTOR D249096
Brand: SEW EURODRIVE Condition: Refurbished Model: 877DT100L84BM64HF Type: Gear Power: 3 HP Voltage: 230/460 V-AC RPM: 48 RPM Phase: 3 PH Weight: 171 lbs Dimensions: 28 X 18 X 14 SKU: D249096 Category: Electrical· Electric Motors Additional Notes: 1-3/4IN SHAFT 35.94:1
|
|
|
Allen Bradley 2 HP AC Motor Inverter Duty Motor 1329RS-HA00218FCH [54]
IID:12400/Aaron Your satisfaction and 5-star ratings are our top priority! Please CONTACT US with any concerns. We will work to ensure your purchasing experience is worthy of your 5-star ratings and positive feedback. Condition Used, Removed from a working environment, see below for warranty details Specifications Brand: Allen Bradley Bullentin 1329 Inverter Duty Motor 2 HP 1750 RPM, Volts: 230/ 460, Amps: 5.4/ 2.7, Allen Bradley Catalog No. 1329RS-HA00218FCH, What's included(1) Allen Bradley 2 HP AC Drive/ Inverter Duty Motor What's NOT included Anything else, Difficulties communicating? We will receive messages sent through eBay. But respond directly to your email. Check your spam folders, especially Gmail users. Before you assume we aren't responding to your messages. More information is available below. Special requests- Do ... morenot include shipping instructions. Make special requests, or send any other messages with your payment or while completing your purchase on eBay. Payments are processed automatically, and we will not see it. Send any such requests in a separate email after your purchase. Thank you. Please take a moment to view other items in our. Thanks! Warranty& Returns: If we made a mistake. We'll fix it. Depending on the item, we may exchange it, replace it, offer replacement parts, or issue a refund(after the item is returned, of course) Sometimes we may request pictures or other information in order to help us help you. If you aren't happy with your item. And we didn't make a mistake, you may still return it within 30 days. We will refund payment for the item only, which does not including shipping charges, which are paid to the carrier. We reserve the right to deduct a restocking fee of up to 15% for any non-defective returns. See full terms below. Your satisfaction and 5-star ratings are our top priority! Please with any concerns. We will work to ensure your purchasing experience is worthy of your 5-star ratings and positive feedback. Items excluded from our standard war
|
|
|
DAYTON General Purpose Motor 2 HP 1725 RPM 115/230v 213 Frame
I am offering a DAYTON General Purpose Motor 2 HP 1725 RPM 115/230v 213 Frame. This is being offered as used because the cap acitor on top and on the side is bent in. I will be repacking this for safe shipping. This motor be ing offered f or a fraction of it's retail value. Some of the specs include: General Purpose Motor. Capacitor-Start. 2 HP. Nameplate RPM 1725. Voltage 115/230. 213 Frame. Open Dripproof, Number of Speeds 1. Full Load Amps 24.8/12.4. 60 Hz, Base Mounting. Thermal Protection None, Insulation Class F, Service Factor 1.20, Max. Ambient Temp. 40 Degrees C, Rotation CW/CCW. Overall Length 14-1/2 In. Shaft Dia. 1-1/8 In. Shaft Length 3 In. Your satisfaction is guaranteed. Thanks for visiting.
|
|
|
(nolot) Reuland Hoist Motor .75 HP 0007C-1BAC-0128
ITEM DESCRIPTION Reuland Hoist Motor.75 HP 0007C-1BAC-0128 Used SEE PHOTOS FOR DETAILS all tags are clearly readable! ask me a? if you like) nolot out front bolted to wooden frame) Shipping given here is a guess-timate. Let me weigh it out according to your location for exact pricing! IMPORTANT* We are unable to test any of our electrical equipment within our warehouse. PAYMENT INFO: USA BUYERS: Any form of Paypal. with other forms of payment. Please ask us! INTERNATIONAL BUYERS: Paypal is preferred. Though we also accept I M O s in US $ from a US bank. E-mail any questions. We expect payment within 7 calendar days of the close of the auction. SHIPPING INFO: Items typically sent out 2-3 days after payment has been received. Will ship worldwide(Please ask us first if you do not see an exact price for shipping for your country! I will no longer ... moreuse your account number with Fedex or UPS for any INTERNATIONAL OVERNIGHT SHIPMENTS PLEASE NOTIFY US WITHIN 14 DAYS IF YOU HAVE NOT RECEIVED YOUR ITEM. Full refunds are granted for any D.O.A. product within 7 days of receiving. Shipping costs are based on Shipping Rate. Packaging Material, Gas, and Labor. We DO COMBINE SHIPPING on multiple purchases! Please do not ask us to mark items as"gifts" to avoid tax and/or duty charges. Local Pickup Available QUESTIONS Please feel free to send us any question you may have. We are happy to answer! Special arrangements will be made for bulk orders/ pick-ups. Please ask! BUSINESS HOURS We are normally here between 8:30 A.M. and 3 P.M. Mon-Fri. FEEDBACK Feedback is left for buyers as soon as payment is received. We ask that you leave us 5 star feedback once you get your item(s) in satisfactory condition. If there is any problem. Please notify us before you leave any feedback! We always strive to resolve any issue. Our customers are very important to us! ABOUT US Freightfinders has been in business since 2002. We specialize in Allen Bradley. Cutler Hammer, Square D, Fanuc, Atlas-Copco and other industrial maintenance pa
|
|
|
(R1-1) 1 LEESON 192055.00 MOTOR R1-1
ITEM DESCRIPTION 1 USED LEESON 192055.00 METRIC MOTOR. PART HAS FEW SCRAPES BUT IS IN GOOD CONDITION. SEE PHOTOS! R1-1 PAYMENT INFO: USA BUYERS: Any form of Paypal. with other forms of payment. Please ask us! INTERNATIONAL BUYERS: Paypal is preferred. Though we also accept I M O s in US $ from a US bank. E-mail any questions. We expect payment within 7 calendar days of the close of the auction. SHIPPING INFO: Items typically sent out 2-3 days after payment has been received. Will ship worldwide(Please ask us first if you do not see an exact price for shipping for your country! I will no longer use your account number with Fedex or UPS for any INTERNATIONAL OVERNIGHT SHIPMENTS PLEASE NOTIFY US WITHIN 14 DAYS IF YOU HAVE NOT RECEIVED YOUR ITEM. Full refunds are granted for any D.O.A. product within 7 days of receiving. Shipping costs are based ... moreon Shipping Rate. Packaging Material, Gas, and Labor. We DO COMBINE SHIPPING on multiple purchases! Please do not ask us to mark items as"gifts" to avoid tax and/or duty charges. Local Pickup Available QUESTIONS Please feel free to send us any question you may have. We are happy to answer! Special arrangements will be made for bulk orders/ pick-ups. Please ask! BUSINESS HOURS We are normally here between 8:30 A.M. and 3 P.M. Mon-Fri. FEEDBACK Feedback is left for buyers as soon as payment is received. We ask that you leave us 5 star feedback once you get your item(s) in satisfactory condition. If there is any problem. Please notify us before you leave any feedback! We always strive to resolve any issue. Our customers are very important to us! ABOUT US Freightfinders has been in business since 2002. We specialize in Allen Bradley. Cutler Hammer, Square D, Fanuc, Atlas-Copco and other industrial maintenance parts. We also stock Honeywell. Johnson Controls, Fife and many HVAC replacement parts. We have a great selection of hydraulic valves and pumps. Fittings, bearings, etc. Another specialty is PLC components. If you do not see it listed. ASK US, we can list it for y
|
|
|
Dewalt Radial Arm Saw Frame 236 motor excellent 11amp..FREE SHIPPING!!!
Dewalt Radial Arm Saw Frame 236 motor.considered by many to be the best motor ever on their 10 inch models. Cord is in very good shape and measures approximately 38 inches. Runs quiet and cool and has an automatic brake for additional safety. Currently wired for 120 but can easily be converted to 240.Frankensaw Ready! Frankensaw refers to the process of using this more powerful motor to replace the small amperage motors used in earlier Dewalts. Will swap out directly with some but not all.usually a different yoke is needed to accomodate the wider profile of this fantastic piece of equipment. That is a heck of a deal delivered to your front door. FREE SHIPPING TO YOUR FRONT DOOR!
|
|
|
BALDOR CWDM3611T AC 3HP 230/460V-AC 1750RPM 182TC 3PH ELECTRIC MOTOR D249081
Brand: Baldor Condition: Refurbished Model: CWDM3611T Type: AC Power: 3 HP Voltage: 230/460 V-AC RPM: 1750 RPM Frame: 182TC Phase: 3 PH Weight: 68.50 lbs Dimensions: 18.50 X 12 X 9.50 SKU: D249081 Category: Electrical· Electric Motors Additional Notes: 1-1/8IN SHAFT
|
|
|
AMBITECH SS4G5X312M MOTOR BRAKE, 3 PHASE, 460 V, 5 HP
Inventory Number: 07080460406 Manufacturer: Description: AMBITECH SS4G5X312M MOTOR BRAKE. 3 PHASE, 460 V, 5 HP Capacity: Model Number: Serial Number: Additional Information: NEW. OTHER WITHOUT BOX, QUANTITY 1 BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: ... moreWe ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple qu
|
|
|
RELIANCE P28G373H DUTY MASTER AC 25HP 230/460V 3510RPM 284TS 3PH MOTOR D249296
Brand: Reliance Condition: Refurbished Model: P28G373H Type: AC Power: 25 HP Voltage: 230/460 V-AC RPM: 3510 RPM Frame: 284TS Phase: 3 PH Weight: 331 lbs Dimensions: 27 X 20 X 19 SKU: D249296 Category: Electrical· Electric Motors Additional Notes: 1-5/8IN SHAFT DUTY MASTER
|
|
|
A O SMITH-(0950237) 114 TURBINE MOTOR,1/3 HP,3450 RPM-WHIRLPOOL MOTOR
FOR SALE AN A.O SMITH 114 TURBINE MOTOR-PART#0950237. USED.BUT RUNS LIKE NEW. TAKEN OFF A 60 GALLON FERNO ILLE WHIRLPOOL THAT HAD OTHER PROBLEMS. THIS MOTOR SELLS FOR OVER $1,400 TO REPLACE. SPECIFICATIONS- MOTOR MODEL- C48H2DB118C1 SERIAL# 7493 HP- 1/3 RPM- 3450 VOLTS- 115/230 PHASE- 1 AMPS- 5.0/2.5 HZ- 60 CODE- L FRAME- 56Z MAX LOAD AMB- 7.2/3.6 INSUL CLASS- BI AMB- 40 DEG.c TIME RATING- CONT TYPE- UC
|
|
|
LINCOLN LINEGUARD 50 HP MOTOR 324TC 3490 RPM 230/460V
LOOKS NICE
|
|
|
RELIANCE ELECTRIC A-C MOTOR X00X6421M-NZ 2.0 HP 1730 RPM 230/460 V 5.4/2.7 A PH3
RELIANCE ELECTRIC A-C MOTOR X00X6421M-NZ 2.0 HP 1730 RPM 230/460 VOLT 5.4/2.7 AMP PH3 NOTICE: PLEASE VIEW ALL PICTURES FOR A DETAILED VISUAL. WHAT YOU SEE IS WHAT YOU GET Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in good working condition. REPAIRED. Unused since repairs. USED. SOLD AS IS, No warranty's no refunds. DETAILS: SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase ... moreunless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARGES. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accep
|
|
|
SEW Gear/Motor combo
This SEW Eurodrive has a.5HP motor operating at 230/460V. Drawing 2/1 Amps respectively to turn the output shaft at 1700 rpm. SO# = 850177314.06.06.006. Direct coupled gearbox is SO# = 850177314.06.06.006 and has a 22.32 ratio. Output shaft on gearbox has a Lovejoy coupling mounted on a 1" keyed shaft. Offered in good operating condition, FOB: NW AR. Batchmaster Ref# 52371. Note: Ebay requires the shipping dimensions and weights be given in advance. Since it is impossible to give that in advance, due to the variables of crating/skidding, please consider the listed dimensions and weights as pro forma only. For more accurate estimates please call or write us after you have paid, and thus have been given our contact information.
|
|
|
BONFIGLIOLI RIDUTTORI VFR49 F1 P63B5 GEAR REDUCER W/ T63BN/4 MOTOR
BONFIGLIOLI RIDUTTORI VFR49 F1 P63B5 GEAR REDUCER W/ T63BN/4 MOTOR GUARANTEED NOT DOA MOTOR: 98123147 IP55 INSUL CLASS F 280/480 VOLTS 60 HZ 0.25 HP 0.18 KW 1660 MIN-1 1.3/0,75 AMPS Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
BONFIGLIOLI RIDUTTORI VF44 N P63B14 GEAR REDUCER W/ T63A4 MOTOR
BONFIGLIOLI RIDUTTORI VF44 N P63B14 GEAR REDUCER W/ T63A4 MOTOR GUARANTEED NOT DOA MOTOR: 22075221013 IP55 SEE PICTURE FOR MORE SPECS Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2 BALDOR GPP23311 DC GEAR MOTOR, 30:1 RATIO, 1/18 HP, 57.5 RPM
Inventory Number: 02130750675 Manufacturer: Description: 2 BALDOR GPP23311 DC GEAR MOTOR. 30:1 RATIO, 1/18 HP, 57.5 RPM Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 2, 1/18 HP, 30:1 RATIO, 57.5 RPM, 50 LBS. IN. TORQUE, PSSH-0 FRAME, 1/2" SHAFT LENGTH, 1-1/8" SHAFT LENGTH. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us ... moreat time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and
|
|
|
DANFOSS CYCLETROL-2000 DC MOTOR SPEED CONTROL
Inventory Number: 06131620017 Manufacturer: Description: DANFOSS CYCLETROL-2000 DC MOTOR SPEED CONTROL Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, REMOVED FROM MACHINE BEING SCRAPPED BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. ... moreSHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We oft
|
|
|
ORIENTAL MOTOR 2RK6RGN-C SPEED CONTROL MOTOR 6W 200V 0.15A 0.8uF 4P
BT# 15772 M07D1-060.1Y You are looking for: ORIENTAL MOTOR 2RK6RGN-C SPEED CONTROL MOTOR 6W 200V 0.15A 0.8uF 4P USED AND TESTED ITEM! 10 DAYS WARRANTY! Manufactured by: ORIENTAL MOTOR CO. LTD. Additional info: SPEED CONTROL MOTOR Model: 2RK6RGN-C 6 Watts 200 Volts 50/60 Hz 0.15 Amps 0.8 uF 30 min. 4 Poles Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 1 business days We ship with: Powered by
|
|
|
MOELLER DIL EM-10 CONTACTOR 15A 3-POLE WITH PKZM0-1,6 MOTOR STARTER Ie=1,6A
BT# 13510 C13D-090.1Y You are looking for: MOELLER DIL EM-10 CONTACTOR 15A 3-POLE WITH PKZM0-1.6 MOTOR STARTER Ie=1,6A USED AND TESTED ITEM! 10 DAYS WARRANTY! Manufactured by: MOELLER. Additional info: CONTACTOR WITH MOTOR STARTER. CONTACTOR Model: DIL EM-10 15A 3 POLE MOTOR STARTER Model: PKZM0-1.6 I е= 1.6A. 50-60Hz Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 1 business days We ship with: Powered by
|
|
|
MOELLER DIL EM-10 CONTACTOR 15A 3-POLE WITH PKZM0-6,3 MOTOR STARTER Ie=6,3A
BT# 13513 C13D-100.1Y You are looking for: MOELLER DIL EM-10 CONTACTOR 15A 3-POLE WITH PKZM0-6.3 MOTOR STARTER Ie=6,3A USED AND TESTED ITEM! 10 DAYS WARRANTY! Manufactured by: MOELLER. Additional info: CONTACTOR WITH MOTOR STARTER PROTECTION. CONTACTOR Model: DIL EM-10 15A 3 POLE 230V- 60Hz MOTOR STARTER Model: PKZM0-6 Ie = 6.3A 50-60Hz Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 1 business days We ship with: Powered by
|
|
|
Melec PM Driver MD-5501 Stepper Motor Drive Driver - Great Shape!
Item up for sale is a: Melec PM Driver MD-5501 Stepper Motor Drive Driver- Great Shape! Item is used and is untested other than what is indicated below: Unit is in good cosmetic shape If you have any questions regarding this item please feel free to contact me and I will do my best to answer your questions 1 item as shown in picture. Picture represents the actual item. ~5 Pounds in a box with packaging materials Included is only what is mentioned. No other cables. Parts, power cords, power adapters, software or any other accessories included. ============================================================================ Terms of Sale Payment Options PayPal only or contact us for payment methods to pay on pickup. Bank transfers or payments using a Cashier’s Check may be available. Contact us for additional information and fees. RETURNS Warranty ... morefor Items shipped in the US 14-Day Right to Return- Buyer has 14 days to test item to determine its operational condition unless it was listed as Parts-Only or As-Is. Should the item be received non-operational you may return the item for refund of the purchase price. 14-day period starts the day you receive the item. You cannot return an item because it is not compatible with the system you installed the item into. Please insure that the item you are purchasing is compatible with the application or in the system you intend to use it. Warranty for Items shipped outside the United States All international sales shipped to a destination outside the US are non-refundable. All international sales are final. SHIPPING Shipping within the United States Buyer is responsible for all shipping costs including returns. Please note for domestic shipments(within US) we ship FedEx ground only. But you can use UPS ground shipping rates(calculated automatically by eBay) to estimate the shipping charges. Actual FedEx ground rates may be cheaper then UPS depending on the destination, so for heavy packages you can always contact us to get the exact shipping rate. FedEx does not ship to PO
|
|
|
Allen-Bradley (1 LOT OF 4) 140-MN-01000 Manual Motor Starter
Allen-Bradley(1 LOT OF 4) 0-MN-01000 Manual Motor Starter This item is used.Working. Please see photo. VDE 066 IEC 947 1.0A 690V AC3
|
|
|
Klockner Moeller (1 LOT OF 4) PKZM 1-10-NA Manual Motor Starter
Klockner Moeller(1 LOT OF 4) PKZM 1-10-NA Manual Motor Starter This item is used.Working. Please see photo. 10 A 660 V VDE 0660 IEC 157 IEC 292
|
|
|
Honeywell M9171B1012 Modutrol IV Proportioning Motor
You are bidding on a Honeywell M9171B1012 MOdutrol IV Proportioning Motor This unit is used. Sold with 7 days return option if DOA. Buyer pays for shipping and handling. We ship worldwide. Your payment must be received within 5 days after this auction is closed. Thanks. Honeywell M. 9171B1012. Modutrol IV. Proportioning Motor Policies: Please check out the picture(s) in this auction. We ship all of our items via UPS Ground if they are in the Continental US and USPS Priority if they are international unless otherwise specified. If you want different shipping. Contact us before you pay as the calculated charges are for these methods. If you DO NOT agree to Terms and Conditions. Payment Methods, Shipping and Handling Fees or our Return Policy please DO NOT bid on this auction. All international shipments require a contact phone number before ... moreshipping. Please contact us with this info. We ship immediately upon confirmation of payment. Returns: We want you to be satisfied and this transaction to go smoothly. Please do not hesitate to contact us with questions or concerns. No Credits or Exchanges will be made without communication first between us and the buyer. Please contact us immediately with details and contact info. When applicable we will send a replacement instead of issuing a refund. Shipping charges are NON-REFUNDABLE. Payment Methods: PayPal: We prefer PayPal. Credit Cards: We accept VISA. Mastercard.
|
|
|
Powermatic Model 225 24' Wood Planer - 15HP Motor
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Powermatic Model 225 24' Wood Planer- 15HP Motor Item Description: This is a 24" wood planer made by Powermatic. Currently stored outdoors. Resulting in surface rust. Unable to test this unit in its ... morecurrent location. Model 225. Power requirements: Motor is 15HP 220 volt. This item was not tested at inspection. Its operational status is unknown. NOTES: Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in Lancaster. CA, 93535 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 36087) nbsp, nbsp, Model: 225, nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Condition: This item is used and sold as-is. This item was not tested for operation. It was removed from an operating environment and placed in storage. We can not verify operational status. May need service and/or parts to make fully operational. nbsp
|
|
|
KONICA QX 60 60A X-Ray Film Processor Main Drive Motor Part # 1560- 961030L
Up for bid: Main Drive Motor part# 1560- 961030L from a working Konica QX-60/ QX-60A automatic x-ray film processor. Reference part number 25 on figure 6 of the parts diagram shown in the pictures. Also included is the gear. The motor moves free and should work fine. If not. I offer a return. Where else are you going to get one of these?
|
|
|
Superior Electric M061-LS08 Slo-Syn Stepping Motor 1.25V 3.8A 200 STEPS S8-4-X
in titles& description Make sure you get our updates on discounts and new available products! In titles& description ATTENTION: What is pictured above is what to expect. Unless stated otherwise in the title or description above. All used items are sold un-tested unless stated otherwise. We accept payments of Credit Card. Debit Card, or E-checks through PayPal only. Please pay within 3 days or please contact us to arrange payment or to cancel the transaction. We honor our"No Hassle Warranty" with either a replacement or a refund if the item is DOA. Not as Described, or was damaged during shipping. Shipping costs are non-refundable. The buyer is responsible for return shipping on all returns. Please always contact us with any questions or concerns as we are here to assist you in any way we can to make you feel welcome and ... moreappreciated for being our customer. All items will be packaged and shipped within 1-2 business days. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We are not held responsible for delays in shipping due to customs. Shipping times for international shipments can take up to 30-45 days depending on holidays and/or customs. Powered by
|
|
 |