|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$3.59 Shipping Condition: New Location: China 1 x Adapter Breakout Board. The output port is P17 port. The output port is P1 port. Connectors: USB(Female)+25PIN(Male). 1 x USB Cable.
Buy It Now
Free Shipping Condition: New Location: China 1 x FMD2740C Stepper Motor Driver. FMD2740C stepper motor driver. The FMD2740C driver can drive all current 4A 4-wire, 6-wire or 8-wire 2-phase / 4-phase ... moremotors, are detailed below 4-wire, 6-wire, 8 wire stepper motor connection.
Buy It Now
Free Shipping Condition: New Location: 宝安区, China LeadShine DM2282 2/4 Phase Digital Stepper Motor Driver 80-220VAC 0.5-8.2A Feature: The DM2282 is a high voltage. Fully digital stepper drive developed ... morewith advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives. DM2282 can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM2282 an ideal choice for high requirement applications. The DM2282 is Suitable for a wide range of stepper motors. From NEMA size 34 to 51. It can be used in various applications such as laser cutters. Laser markers, high precision X-Y tables, labeling machines, CNC router, etc. Its unique features make the DM2282 an ideal choice for applications that require both low-speed smoothness and high speed performances. Anti-Resonance. Provides optimum torque and nulls mid-range instability• Motor self-test and parameter auto-configuration technology.Offers optimum responses with different motors• Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance• Microstep resolutions programmable. From 200 steps/rev to 102,400 steps/rev• Soft-start with no“jump” when powered on• Supply voltage up to +220 VAC• Output current programmable. From 0.5A to 8.2A• Pulse input frequency up to 200 KHz• TTL compatible and optically isolated input• Automatic idle-current reduction• Suitable for 2-phase and 4-phase motors• Support PUL/DIR and CW/CCW modes• Over-voltage. Under-voltage, over-current, phase-error protections Specification: Model No.DM2282 Motor Phase:2. 4 Matched Motor:NEMA 34- 51 Supply Voltage:0- 220 VAC. 115-305 VDC Output Current:0.5– 8.2 A Logic Signal Current:7- 20 mA Pulse Input Frequency:0- 200 kHz Microstep Resolu
Buy It Now
Free Shipping Condition: New Location: China 8- The value of the inversion in place delay (i.e., the value of [P7]) in seconds. Feature: 1. This module has no programmable function, but built in ... morea variety of fixed operation mode, the user can quickly choose the appropriate trajectory.
Buy It Now
$110.00 Shipping Condition: New Location: China 4 pcs Nema 23 stepper motor 425 oz.in bipolar 23HS9430 Single shaft. Nema 23 stepper motor Hording torque when DM542A run under high speed is also significantly ... morehigher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: Hainesport, United States 8825 Driver. Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender;Support System: Windows XP/7/8/10. --the chip internal resistance ... moreis smaller, lower heat, better heat dissipation.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 2 x TB6600 Stepper Driver. In the user expects low cost, high current operation. Stepper Motor. Can drive 4, 6 and 8 Lead two-phase, four-phase stepper ... moremotor. VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$8.99 Shipping Condition: New Location: Sacramento, United States DIRECTS AND DIVERTS STEP AND DIRECTION SIGNALS TO THE PINS YOU NEED THEM SENT TO, BOTH ON MULTI AXIS STEPPER MOTOR DRIVER BOARDS WITH DB25 INPUT, AND/OR ... moreFOR UP TO EIGHT SINGLE AXIS STEPPER MOTOR DRIVER BOARDS.
Buy It Now
Free Shipping Condition: New Location: United States Support for connecting electronic handwheel. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;. 4 general-purpose ... moreinputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
Buy It Now
Free Shipping Condition: Used Location: Carpinteria, United States Knowledge and experience are in this case highly valuable nevertheless reading simDrive™ manual carefully even less experienced users will be able to ... moreset the simDrive™ device properly. The simDrive™ AC servo Driver.
Buy It Now
$2.99 Shipping Condition: New Location: China Maybe you also interested it: CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A driver board From Hong Kong. Stepper Motor Drive Controller ... moreBoard Module L298N Dual H Bridge DC For Arduino From Hong Kong. Stepper Motor Drive Module L298N Dual H Bridge DC +28BYJ-48 5V Stepper Motor DC From Hong Kong. Stepper Motor Drive Controller Board Module L298N Dual H Bridge DC For Arduino From Hong Kong. ULN2003AN ULN2003 Stepper Motor Driver Board Module for Arduino AVR ARM SMD L9110S H-bridge Stepper Motor Dual DC motor Driver Controller Board for Arduino From Hong Kong. 28BYJ-48 Valve Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction For Arduino From Hong Kong. 5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase From Hong Kong. Motor Drive Shield Expansion Board L293D For Arduino Duemilanove Mega2560 UNO From Hong Kong. StepStick Stepper motor driver A4988 A4983 3D Printer driver module Reprap Prus From Hong Kong. Item Description: 1. Fully support of MACH3 and other computer software support for parallel port control. 2. USB power supply and peripherals powered phase separation to protect computer security. 3. Peripheral wide voltage input,12-24V, and anti-reverse function. 4. All of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security. 5. All the way to the relay output port, control spindle switch. Output port P17 mouth. 6. All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port. 7. Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled. 8. P1 as PWM outputs can be controlled with optocoupler input spindle governor. 9. Can be accessed by a common cathode or common anode input level to 5V drive. Downlo ad We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is ve
Buy It Now
Free Shipping Condition: New Location: China 3 axis Nema 17 stepper motor 40 oz.in& driver DM420A CNC kit This item includes: 3 pcs Nema 17 stepper motor with 40 oz. in. 4 leads, 0.4A, 3 pcs ... moreStepper motor driver DM420A. Peak 2.83A, 128 micsteps, DETAILED INFORAMTION: 1. Nema 17 stepper motor: Model Step angel(°) Motor Length L(mm) Rate Voltage(V) Rate Current(A) Phase Resistance(Ω) Phase Inductance(mH) Holding Torque(oz.in) Lead Wire(NO. Rotor Inertia(g.cm2) Detent Torque(kg.cm) Motor Weight(kg) 17HS3404 1.8 34 12 0.4 30 37 40 4 34 0.20 0.24 2. Stepper motor driver DM420A: http:www.longs-motor.com/ProductsView.asp?id=278 Detailed pic: Introduction: DM420A is a type of two-phase hybrid stepping motor driver. The drive voltage of which is from 12VDC to 36VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 20mm to 42mm outside diameter and less than 2.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM420A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on. Features: L High performance. Low price. L Average current control. 2-phase sinusoidal output current drive. L Supply voltage from 12VDC to 36VDC. L Opto-isolated signal I/O. L Overvoltage. Under voltage, overcorrect, phase short circuit protection. L 8 channels subdivision and automatic idle-current reduction. L 8 channels output phase current setting. L Offline command input terminal. L Motor torque is related with speed. But not related with step/revolution. L High start speed. L High hording torque under high speed. What’s more. We are looking for distributors in the world, if you are interested in our programme, please contact us! Let's grow together! You can add my Msn: lily1990
Buy It Now
Free Shipping Condition: New Location: China Input: 1-5A Current, Select Drive Stepper Motor. ERR: Red Light, Power, Indicator Light, Power Indicator. Feature: 1. The half- function is a 200ms step ... morepulse, and the driver output current is automatically reduced to 50% of the rated output current to prevent motor heating.
Buy It Now
$6.75 Shipping Condition: New – Open box Location: Broomfield, United States It accepts commands from a trajectory planner (i.e. Mach3) and produces a very high quality pulse train to stepper and servo motors. Initial wiring in ... moremost existing systems will be as simple as unplugging the printer port cables from the back of the computer and plugging them into the two 26 pin headers on the Smooth Stepper using an adapter.
Buy It Now
Free Shipping Condition: New Location: Hainesport, United States GRBL 32-bit, stable performance, faster speed and higher accuracy. GRBL 32-bit chip technology Integrated 3 A4988/8825 drivers, directly connect to four ... morewire stepper motor. Support the xyz limit switch, probe interface.
Buy It Now
$1.34 Shipping Condition: New Location: 金东区, China New CNC MACH3 USB 6 Axis Interface Breakout Board Adapter For Stepper Motor Driver#A145A. Click To Enlarge MACH3. CNC software for mainframe computers ... moreand peripheral power control signal transfer and processing. Feature 1, all output and input models by Philips dedicated high-speed chip processing. The signal is an integer, amplification, eliminating unnecessary interference signal. The operation of the machine more stable. 2. USB and external power supply. The power supply isolation. Computer and data processing machines more secure 3, all of the input signal by the optical coupling isolation all of which P11. P12 port for high-speed optical coupling can be used to connect the spindle encoder, or hand- wheel A. B equal to demanding signal. 4, there is a special off the total electric power supply of the relay, the computer shuts down automatically when carving machine with other equipment, turn off all power. 5, there is a special relay switch coolant supply, support MACH3. G code programming( parallel port P3. G code to open M8. M9 off) the relay switch on the lights. Easy to determine the power off. 6, there is a spindle-powered ad hoc relay support MACH3. G code programming( parallel port P2 I. G to open the code M3. M2 off) the relay switch on the lights. Easy to determine the power-off 7. On the spindle speed control: special high-speed optical coupling isolation, can output PWM signal output for the parallel port P1. 8, the interface board have a PWM to 0-10V digital-analog conversion circuit. Can output 0-10V level to control the market and control the speed of only analog converter. To control the spindle speed. Output for the parallel port P1. 9. The interface board can be connected common cathode or common anode output to the stepper drive or servo drive. Output for the 5V level. 10. Wide voltage power supply, 12V or 16-35V can choose a set of two power supply. Reversed with anti- power input design. 5 input port： Port description P10 X limit P11 on the knife P
Buy It Now
$3.00 Shipping Condition: New Location: China CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A driver board, Photo: Description: Features: Working voltage DC 10V-35V. Recommended ... moreto use a switching power supply DC24V power supply. 6N137 high-speed optical coupling. Guarantee high speed without losing step. using the Toshiba TB6560AHQ new original chip with low voltage shutdown. Overheating stop and overcurrent protection circuit to ensure optimal performance. Rated maximum output: ± 3A. Peak 3.5A. for two-phase within 42.57 stepping 3A/ four-phase/ of line four/ six-wire stepper motor, and is not suitable for more than 3A stepper motor. automatic half current function. subdivision: whole step. Half-step, step 1/8, 1/16 step, a maximum of 16 subdivisions. Dimensions: width 50* 75* long high-35(MM) Features similar products: 1. Current grade-by-adjustable to meet your demand for a variety of applications. 2. Semi-automatic flow adjustable. 3 6N137 high-speed optical coupling. Guarantee high speed without losing step. 4. Plate printed setup instructions operation without manual also. 5. Thick teeth radiator, good heat dissipation. Absolutely use Toshiba TB6560AHQ. New original chip, a penalty at ten! Package Contents 100% Brand New 1x TB6560 3A driver board, Shipping: We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback. So that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them! Ship by Post Air-mail within 1 working days after full payment is received. The shipment usually takes 12-35 business days to Worldwide. We also provide international Expressed delivery such as EMS. DHL and UPS,extra shipping fees is needed. The shipping time may vary. Depends on receiver's location. Country Delivery Time Working Days(not including holiday) 5-7 8-10 11-14 15-19 20-22 25 Working Days + Saturday + Sunday 5-9 10-14 15-20 21
Buy It Now
$3.50 Shipping Condition: New Location: China Motor noise optimisation function. Output peak current 4.0A. 5.H-bridge bipolar constant current driver. Automatic half-current to reduce heat. Raspberry ... morePi. Product features Product Introduction. Arduino Module.
Buy It Now
Free Shipping Condition: New Location: United States Support for connecting electronic handwheel. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;. 4 general-purpose ... moreinputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
Buy It Now
$3.00 Shipping Condition: New Location: China Maximum 2000KHZ pulse output for each axis, supporting stepper motors and servo motors. - 4-channel differential signal output: pulse + direction. Usually ... moreit cost about 35USD-50USD.
Buy It Now
Free Shipping Condition: New Location: United States Adaptable models Practical, can be adapted to Nema17 Nema23 Nema34 Nema42 Nema57 stepper motor. Subdivision The maximum drive subdivision is 128, more ... moreaccurate. We take our reputation seriously.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States 3 Nema 23 600 oz in motors with 3.9 inductance, and 8mm dual shafts with machined flats for maximum strength. These are engineered in house for the best ... moreperformance when combined with the G540. These motors also include the wiring diagram on them for simple hookup, and go operation.
Buy It Now
Free Shipping Condition: New Location: 金东区, China New CNC MACH3 USB 6 Axis Interface Breakout Board Adapter For Stepper Motor Driver#A145A. Click To Enlarge MACH3. CNC software for mainframe computers ... moreand peripheral power control signal transfer and processing. Feature 1, all output and input models by Philips dedicated high-speed chip processing. The signal is an integer, amplification, eliminating unnecessary interference signal. The operation of the machine more stable. 2. USB and external power supply. The power supply isolation. Computer and data processing machines more secure 3, all of the input signal by the optical coupling isolation all of which P11. P12 port for high-speed optical coupling can be used to connect the spindle encoder, or hand- wheel A. B equal to demanding signal. 4, there is a special off the total electric power supply of the relay, the computer shuts down automatically when carving machine with other equipment, turn off all power. 5, there is a special relay switch coolant supply, support MACH3. G code programming( parallel port P3. G code to open M8. M9 off) the relay switch on the lights. Easy to determine the power off. 6, there is a spindle-powered ad hoc relay support MACH3. G code programming( parallel port P2 I. G to open the code M3. M2 off) the relay switch on the lights. Easy to determine the power-off 7. On the spindle speed control: special high-speed optical coupling isolation, can output PWM signal output for the parallel port P1. 8, the interface board have a PWM to 0-10V digital-analog conversion circuit. Can output 0-10V level to control the market and control the speed of only analog converter. To control the spindle speed. Output for the parallel port P1. 9. The interface board can be connected common cathode or common anode output to the stepper drive or servo drive. Output for the 5V level. 10. Wide voltage power supply, 12V or 16-35V can choose a set of two power supply. Reversed with anti- power input design. 5 input port： Port description P10 X limit P11 on the knife P
Buy It Now
Free Shipping Condition: New Location: China QUALITY-GADGETS eBay Item! Upgrade Usb 5 Axis Cnc Breakout Board Interface Adapter For Stepper Motor Driver 5 Axis USB Breakout Board For CNC Single Stepper ... moreMotor Driver Controller Descriptions: The latest upgraded salable 5 axis breakout board is speacilly designed for the CNC single axis stepper driver controller. Such as M542, M542H, MA560, MA860H, 2M542, 2M982, DM542(A) DM860(A) etc single axis stepper driver controller series. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc. Key Features: Upgraded circuit. Work more peacefully and steady than the previous version Maximum support 5-axis stepper motor driver controllers Two ways to get power. 5V DC power supply or USB port to get power from PC directly Two-stage signal processing. Smooth signal transmission, powerful anti-jamming 5-input interface to define the Limit. Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc. Relay output control interface. Accessed by the spindle motor or the air pump, water pump, etc. 5-axis work LED display. Visually display the working condition of the stepper driver controller Wiring Diagram: Electrical properties(ambient temperature Tj = 25 ℃ pm) Input Power 5V DC power supply or USB port to directly get power from PC Compatible Stepper Motor Driver Max 5 single axis stepper motor driver controller Drive type Pulse + Direction + Enable Signal Control Net/Total Weight Approx 80g/300g Dimensions 90* 82* 15mm(L*W*H) 1 x 5 Axis Breakout Board 1 x DB25 Parallel Cable 1 x USB Power Cable 1 x CD Click here for the Mach3 software USD 201.79(Free P&P* USD 184.11(Free P&P* USD 271.19(Free P&P* USD 56.64(Free P&P* USD 60.19(Free P&P* USD 83.80(Free P&P* USD 86.99(Free P&P* USD 66.89(Free P&P* GBP 260.29(Free P&P* GBP 233.19(Free P&P* USD 58.58(Free P&P* USD 77.69(Free P&P* GBP 89.29(Free P&P* USD 63.79(Free P&P* USD 35.88(Free P&P* USD 31.59(Free P&P* USD 69.99(Free P&a
Buy It Now
$8.00 Shipping Condition: Used Location: Tooele, United States Key Features CNC Engraving Machines.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Resistors for these motors are also included for the G540. Gecko G540 20AWG 13ft. Pro Shielded Motor Cables (Made With Signal Cable) - YouTube. MythBusted ... moreStepper Motor Accuracy Less Than. 001in! Gecko G540 - YouTube.
Buy It Now
$2.99 Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States CNC Router Single 1 Axis Controller Stepper Motor Drivers TB6560 3A driver board, Photo: Description: Features: Working voltage DC 10V-35V. Recommended ... moreto use a switching power supply DC24V power supply. 6N137 high-speed optical coupling. Guarantee high speed without losing step. using the Toshiba TB6560AHQ new original chip with low voltage shutdown. Overheating stop and overcurrent protection circuit to ensure optimal performance. Rated maximum output: ± 3A. Peak 3.5A. for two-phase within 42.57 stepping 3A/ four-phase/ of line four/ six-wire stepper motor, and is not suitable for more than 3A stepper motor. automatic half current function. subdivision: whole step. Half-step, step 1/8, 1/16 step, a maximum of 16 subdivisions. Dimensions: width 50* 75* long high-35(MM) Features similar products: 1. Current grade-by-adjustable to meet your demand for a variety of applications. 2. Semi-automatic flow adjustable. 3 6N137 high-speed optical coupling. Guarantee high speed without losing step. 4. Plate printed setup instructions operation without manual also. 5. Thick teeth radiator, good heat dissipation. Absolutely use Toshiba TB6560AHQ. New original chip, a penalty at ten! Package Contents 100% Brand New 1x TB6560 3A driver board, Shipping: We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback. So that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them! Ship by Post Air-mail within 1 working days after full payment is received. The shipment usually takes 12-35 business days to Worldwide. We also provide international Expressed delivery such as EMS. DHL and UPS,extra shipping fees is needed. The shipping time may vary. Depends on receiver's location. Country Delivery Time Working Days(not including holiday) 5-7 8-10 11-14 15-19 20-22 25 Working Days + Saturday + Sunday 5-9 10-14 15-20 21
Buy It Now
Free Shipping Condition: New Location: China
![]()
Buy It Now
Free Shipping Condition: New Location: United States 4 Axis CNC 3.5A TB6560 Stepper Motor Driver Board Controller F Engraving Machine. Click To Enlarge CNC stepper motor driver board 96560A V1 adopts the ... morenew chip TB6560AHQ of TOSHIBA. The max ouput current can reach to 3.5A, this driver board can drive the 2-phase or 4-phase stepper motor whose current is less than 3A. The advantages of the TB6560AHQ chip: The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed. Flush type low heat: The area of the chip can support itself to cool when the current is low Supports a lot of stepper motors The advantages in the high-speed running condition board might be made partly out of recycled parts. Because of the environmental protection Features: 4-wire 0-3.5A(normally 3A. The 3.5A is the peak current)can be regulated rate current output, bipolar stepper motor driver Standard parallel port. Supports Mach 2, KCAM 4 etc. Optical isolated(IO) and DCDC power isolated to protect the PC parallel port and other equipments Limit and emergency stop port( standard DB9 port) 4 working modes: mixed mode. Fast mode, slow mode, standard mode 4-resolution: 1 1/2 1/4 1/16 12-36V single power input uses the switch power chip as the 5V power supply. Stable and low heat Adopts RC + 7414 auto semi-flow The relay output can control the main axis 5th axis extension control port Packing list: 1* 4 Axis CNC TB6560 Stepper Motor Driver Board 1* DB25 Parallel Male- F emale Cable 4* Connect Terminal A997A NOTE We try our best to make every transaction perfectly, just for winning your F ive-Star rating. If you have any dissatisfaction. Please contact us. We will give you the most satisfactory results. PLEASE don't leave a neutral or negative easily. Shipping Item will be shipped within 24 hours on payment received from Hong Kong using Airmail. Only shipped to buyer's PayPal address. Please confirm with your PayPal address before you bid. Delivery time depends on destination and other factors. It may takes up to 30 business days. O
Buy It Now
Free Shipping Condition: Brand New Location: China Auto Start Stop Eliminator Cable For Chevrolet Malibu Before&Including 2018. 1 x Adapter Breakout Board. The output port is P17 port. The output port ... moreis P1 port. Loaded Boat Style Guitar Pickup Output Input Jack Plug Socket For FD Strat.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Stepper Motor Driver is a board for DRV8825 microstepping stepper motor driver. 5 UEETEK DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink ... morefor 3D Printer. - DRV8825 driver board is widely used in 3D printers and small CNC machines.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States [Suit for]: The stepper motor driver TB6600 is suitable for driving 57 and 42 type two-phase and four-phase hybrid stepping motors, which can achieve ... morelow vibration, low noise and high speed driving effect.
Buy It Now
$25.00 Shipping Condition: New Location: United States Holding torque when DQ420MA driver runs at high speed is also significantly higher than other two-phase drivers, what’s more, the positioning accuracy ... moreis also higher. 2 PCS Nema 17 Stepper Motors with 4800g.
Buy It Now
Free Shipping Condition: New Location: Lincoln, United States Assembled CNC Shield with 4 A4988 (2A) Driver Modules. 4 - A4988 (2A) Driver Modules. 4 - Heat Sinks for A4988 Driver Modules. 1 - Assembeled CNC UNO ... moreShield. Our goal is to resolve any issue as quickly as possible.
Buy It Now
$2.88 Shipping Condition: New Location: China Bring you great deals everyday! Description 1 current grade-by-adjustable to meet your demand for a variety of applications. 2 semi-automatic flow adjustable. ... more3 6N137 high-speed optical coupling. Guarantee high speed without losing step. 4 plate printed setup instructions operation without manual also. 5 thick teeth radiator. Good heat dissipation. 100% brand new and high quality Size:75*50*35(mm)LxWxH) 2.95'x1.96'x1.37' approx) Rated maximum output: ± 3A. Peak 3.5A. Working voltage DC 10V-35V. Recommended to use a switching power supply DC24V power supply. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown. Overheating stop and over current protection circuit to ensure optimal performance. For two-phase within 42.57 stepping 3A/ four-phase/ of line four/ six-wire stepper motor, and is not suitable for more than 3A stepper motor. Automatic half current function. 6N137 high-speed optical coupling. Guarantee high speed without losing step. Subdivision: whole step. Half-step, step 1/8, 1/16 step, a maximum of 16 Subdivisions. Quantity: 1pc Package: 2PC x TB6560 3A Driver Board CNC Router. Return Policy 1. We will re-send a new item to you if we make mistake to offer a wrong product. 2. We are not responsible for people or shipping damage. 3. If you are willing return item back to us. Please keep it in original package. Thanks. Shipping Shipping to US: USPS with tracking number. 11-23 working days) To UK.Australia,Canada without tracking number(20-25 working days) To other country: without tracking number by China Post(35-45 working days) Note: To other country. The package value over 50USD will add tracking number free. Payment 1.We only received the payment from paypal 2.We expect your fast payment. 3.Pls pay for your order within 4days. Or ebay will open unpaid case for it Feedback 1. We take care of each customer's feedback. 2. Any disatisfied with item. Kindly contact with us, we will offer our best service for you. 3. We believe all the question can be solved through fr
Buy It Now
Free Shipping Condition: New Location: Raleigh, United States For 42, 57 3A stepper within two-phase / four-phase / four-wire / six-wire stepper motor is not suitable for more than 3A stepper motor. The maximum rated ... moreoutput: ± 3A, peak 3.5A. 5, using a fine-toothed thick radiator, good heat dissipation.
Buy It Now
Free Shipping Condition: New Location: 金东区, China New CNC MACH3 USB 6 Axis Interface Breakout Board Adapter For Stepper Motor Driver#A145A. Click To Enlarge MACH3. CNC software for mainframe computers ... moreand peripheral power control signal transfer and processing. Feature 1, all output and input models by Philips dedicated high-speed chip processing. The signal is an integer, amplification, eliminating unnecessary interference signal. The operation of the machine more stable. 2. USB and external power supply. The power supply isolation. Computer and data processing machines more secure 3, all of the input signal by the optical coupling isolation all of which P11. P12 port for high-speed optical coupling can be used to connect the spindle encoder, or hand- wheel A. B equal to demanding signal. 4, there is a special off the total electric power supply of the relay, the computer shuts down automatically when carving machine with other equipment, turn off all power. 5, there is a special relay switch coolant supply, support MACH3. G code programming( parallel port P3. G code to open M8. M9 off) the relay switch on the lights. Easy to determine the power off. 6, there is a spindle-powered ad hoc relay support MACH3. G code programming( parallel port P2 I. G to open the code M3. M2 off) the relay switch on the lights. Easy to determine the power-off 7. On the spindle speed control: special high-speed optical coupling isolation, can output PWM signal output for the parallel port P1. 8, the interface board have a PWM to 0-10V digital-analog conversion circuit. Can output 0-10V level to control the market and control the speed of only analog converter. To control the spindle speed. Output for the parallel port P1. 9. The interface board can be connected common cathode or common anode output to the stepper drive or servo drive. Output for the 5V level. 10. Wide voltage power supply, 12V or 16-35V can choose a set of two power supply. Reversed with anti- power input design. 5 input port： Port description P10 X limit P11 on the knife P
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Box Professional ... moreDriver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping Condition: New Location: China The mode needs to be set in [F5-F8] function. Feature: 1. This module has no programmable function, but built in a variety of fixed operation mode, the ... moreuser can quickly choose the appropriate trajectory.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 4 pcs Nema 23 stepper motor 435 oz.in bipolar 23HS9442 Single shaft. Nema 23 stepper motor Stepper motor driver DM542A Hording torque when DM542A run ... moreunder high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: China Stepper motor: X/Y1/Y2/Z. Connection: USB cable. 1 x USB cable. After the electrical connection is completed, turn on the power. The real color of the ... moreitem may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Buy It Now
Free Shipping Condition: New Location: United States 4 pc Stepper motor driver High Perfermance Stepper Driver DM860A Up to7.8A, 24-80VDC With Fan. Hording torque when DM860A run under high speed is also ... moresignificantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: Kearny, United States Support XYZ axis, double Yaxis. --the chip internal resistance is smaller, lower heat, better heat dissipation. --4 layer PCB board, better heat dissipation ... moreperformance. --Integrated 3pcs A4988 drivers, directly connect to four wire stepper motor.
Buy It Now
$5.00 Shipping Condition: New Location: China 5 Axis CNC Breakout board interface adapter board. 5 Axis CNC Interface board Breakout Board For Stepper Motor Driver Mach3 for CNC. 5 Axis CNC Interface ... moreAdapter Breakout Board For Stepper Motor Driver Mach3 w/USB.
Buy It Now
Free Shipping Condition: New Location: China new_template Optional: With Handle Remote( NOT INCLUDED) Click on the picture for more details. ↑ DDMDTV1.0 is a CNC system based mach3.It’s version is ... more1.0 now. The stepper driver is TB6600 from TOSHIBA. You do not need to add other Hardware，and you can complete the signal conversion from the G-code to the movement of the stepper motor drive control. This card is compatible with most stepper motor with 0.6-4A and 2-phase. And it is perfect weapon to replace mach3 parallel interface stepper driver board. Requirements of Computer. Basic Configuration： CPU：1GHz； Memory：512MB 500MB Available disk space USB 2.0 Recommended configuration： CPU：2GHz Dual Core； Memory：2GB； 1G Available disk space USB 2.0 Product feature Simultaneously control 4 stepper motors. USB communication interface. And power supply for the board； 11 IO input. Opto-isolated， It Can be configured to limit the emergency stop and other functions， all of them are 15D-3.5 port. 6 IO input with no opto-isolated but with iso-IC. This port is set to 15D-3.5mm and PHB2.0-2*3port. 2 IO output with opto-isolated for spindle can be configured to EN and DIR. up to 5 axes stepper-motor control port. Each port has up to 200KHz plus output； COTEX-M3 of NXP-LPC is main control chip； New feature: New design Aluminum cooling make the system more stable； This system is equipped with RS2332 manual control box. You can use manual control box with this port. Equip control panel. You can give normal order from this panel on box. Spindle control port has PWM Mod（0%100% dutycycle with 12Vpp）and voltage Mod（0-10V） Spindle speed feed back port-INDEX. There is a power autostability system. When USB port overvoltage or undervoltage or within other EMI. This system can make power of system stable. There are High speed interface chips.Which make stepper driver signal more stable. There is a USB protection chip.Which can protect system within high voltage EMI； With TB6600 stepper motor driver(10: 4-channel. 4A,16 subdivision) Electrical parameters A. System input voltage:5
Buy It Now
Free Shipping Condition: New Location: China Side toggle switch EN: for the toggle switch, the white part is up and down, then down for the start; for the toggle switch, the white part is horizontal, ... morethen dial to start. The driver is based on advanced technology and be provided with high speed, high torque, low noise, low vibration, over current protection, overload protection, less phase line.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: 金东区, China Stepper motor: X/Y1/Y2/Z. Connection: USB cable. 1 x USB cable. After the electrical connection is completed, turn on the power. The real color of the ... moreitem may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Buy It Now
$4.00 Shipping Condition: New Location: China 1 x 4-Axis TB6560 Stepper Motor Driver Kit. - Universal architecture: Supports most parallel software MACH3, KCAM4, EMC2 etc! - Adjustable drive current ... moresettings for each axis: 25%,50%,75%,100% of full current can be set for different stepper motors.
Buy It Now
Free Shipping Condition: New Location: 金东区, China
Buy It Now
$18.95 Shipping Condition: New Location: Streamwood, United States NEMA34 110AC Closed Loop Stepper Motor 1699 oz-in, Driver - Hybrid Servo Kit 1: NEMA 34 Closed Loop Motor: KL34-12N-1000: 1699 oz-in, shaft size: 1/2". ... moreHolding Torque: 12 N-m, 1699 oz-in. 2: 110VAC KL-110-80H Driver Specification.
Buy It Now
$13.95 Shipping Condition: New Location: Streamwood, United States KL-5080D4 is a closed loop stepper drive. Powering 2-phase stepper motors of NEMA 8, 11, 14, 17, 23, and 24. The NEMA23 KL23-31N-1000 motor is a 2 phase ... morestepper motor with 3.1 N.m (439 oz-in) holding torque and integrated with a 1,000 line (4,000 counts/revolution) differential ended rotary encoder.
Buy It Now
Free Shipping Condition: New Location: China Suitable for engraving machine, marking machine, cutting machine, phototypesetting, plotter, CNC machine tool, holding device, etc. Item Type: Micro Step ... moreDriver. Feature: 1. If you do not receive our reply within 48 hours, pls.
Buy It Now
$3.00 Shipping Condition: New Location: China Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. - 1 x DM542A stepping motor driver.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China The breakout board using high-performance three-state bus driver 74HC244 and Schmitt inverter 74HC14. The input signal is amplified, rectified, filtered ... moreto make the drive capability of the output signal more stable and stronger.
Buy It Now
$3.49 Shipping Condition: New Location: China 1 x Adapter Breakout Board. The output port is P17 port. The output port is P1 port. Connectors: USB(Female)+25PIN(Male). Color: Blue+Black.
Buy It Now
$30.00 Shipping Condition: New Location: China CNC Machine 400W BL Spindle Motor + 600W DDBLDV1.0 Brushless DC Motor Driver 12000RPMt. DDBLDV1.0 is a High performance BL motor Driver with the chip ... moreSCM1243MF of SANKEN inside. It appropriate to driver little and middle power Brushless DC motor.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Set Standard ... moreDriver Board is equipped with TB6560AHQ chip.
|
|
|
 |