|
Order by:
Available to:
This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: China 1 x Electric Desktop Conveyor Belt. Belt width: 80MM. Belt speed: 1.8-7.6CM/S. Support material: High-Density 3D Printing. The manufacturer does not necessarily ... moreendorse use of these products.
Buy It Now
$150.00 Shipping Condition: Used Location: Hayward, United States The model number is 75132851 and it falls under the categories of Belt Conveyors, Conveyor Systems. The actual length of the conveyer is 8" wide x 29-3/4" ... morelong. Conveyors & Conveyor Parts, and Material Handling.
Buy It Now
Free Shipping Condition: New Location: China Material stainless steel,PVC. Product application Food, daily necessities, chemicals, machinery&hardware. Machinery Capacity 20m/min. supprt weight range ... more50kg.
Buy It Now
Condition: Used Location: Millersburg, United States Motor: 3Hp 230/460V 3PH 45 RPM Output. Bed Length: 78' (conveyor consists of 12' sections + 4' drive and 2' tail pulley sections. Conveyor in good used ... morecondition. Tested in working condition. Drive Type: Center drive underside pulley take-up tensioner unit, RH direct drive type 43"BW. ).
Buy It Now
Condition: Used Location: Millersburg, United States Part Number F201.5. Model F201.5. Superior F201.5 Inkjet Coding Conveyor 14"x54"L Variable Speed 115V Cleated Belt Superior Case Coding. Motor & Gearbox: ... more115V Gearmotor. Drive Type: Chain drive, Variable speed drive.
Buy It Now
Condition: Used Location: Wolcottville, United States This is a used feed Hopper that was used to feed caps for aerosol cans into a large vibratory feeder bowl, and could be reused in a similar application. ... moreThis unit is 11'6" long overall 48" wide and 54" high. The hopper has a 28x35" opening at each end for loading. Conveyor speed is 5 feet per minute. Motor is 230/460 volt 3 phase. Unit weights 810 pounds .
Buy It Now
Condition: Used Location: Millersburg, United States 20 Legs total. Sections: 10 sections, 10' each. Roller Axle Size: 7/16" hex. Bed Height (Roller Height from Floor): 26" minimum. Lift Tables. Overall ... moreLength: 120'. We are dedicated to understanding the unique challenges and opportunities that each industry faces.
Buy It Now
Condition: New – Open box Location: Louisville, United States 2-1/2" PITCH HINGED STEEL BELT CONVEYOR. NEVER INSTALLED. LOW PROFILE. IRONMAN GEAR BOX.
Buy It Now
Free Shipping Condition: New Location: China 1 x Photoelectric Counter. Conveyor width: 80MM. Conveyor belt length: 490MM. 1 x Desktop Conveyor Belt. causing the item not fitting your need. Support ... morematerial: PP. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Buy It Now
Free Shipping Condition: New – Open box Location: New Market, United States
Buy It Now
$239.99 Shipping Condition: Used Location: Millersburg, United States Portec model 32A25-19. Motor & Gearbox: 1Hp 230/460V 3PH 10:1 Gearbox. Belt Speed: 185 FPM. Lift Tables. Bed Width (Inside): 15". Bed Length: 64". Bed ... moreHeight (From Floor): 8-3/4". Belt Width: 16".
Buy It Now
Condition: Used Location: Woodruff, United States TOTAL LENGTH: 7FT. TOTAL WIDTH: 6FT. MODEL: N/A.
Buy It Now
$700.00 Shipping Condition: Used Location: Bristol, United States Machine Turbo Chip Conveyors Used Motor Model-C4T17N219A Volts- 280-230 460.84/92.42/46 RPM- 1725/1425 HP- 1/4 HZ-60/50 3-Not 8" in. Wide Chip Track ... moreDimensions L113"xH62"xW42" weight 1040 lbs. As is Question please call 517-294-8737 Check out my! Shipping Item is located in Howell Michigan. Great pick up item. For a freight quote please send me your zip code and state if its a business address with a way to unload a semi trailer or residential address and you need a lift gate. Buyer pays all shipping expenses. Thank you Return Policy Within 14 days after recieving this item and if you believe that I misrepresented it. Please email me to set up a return. All return postage or freight will be payed by the buyer and it must be returned in the same condition that it was shipped. Thank You Liability Seller makes no claims as to the equipments compliance to Starlight Supply Inc. Or any other safety standard, and is held harmless regarding any cost resulting from non-compliance. The seller and its agents are to be held harmless for any personal injury or property damage resulting from the handling or use of this equipment or items. It is the buyer's responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer's responsibility as to the safe handling and operation of this equipment or items Be sure to add me to your!
Buy It Now
Condition: Used Location: Warren, United States We will accept wire transfer, check, cash. PICK UP OR FREIGHT.
Buy It Now
Condition: New – Open box Location: Elk Grove Village, United States Model: 13D475. New out of box Expandable conveyor on casters. Portable and shapeable to fit your needs. Conveyor Width: 30 ". Length Expanded: 24 ft. ... moreCapacity: 200 lbs per foot. Any sale outside of our 50 mile radius is to be sold AS-IS.
Buy It Now
$5.90 Shipping Condition: New Location: Miami, United States The bracket is designed to securely fasten and support conveyor systems, ensuring that they operate smoothly and efficiently.
Buy It Now
Condition: Used Location: Millersburg, United States ConveyX model FX14T30403A5G. Used Conveyor in working condition. Tested and running. 115V input power. 26" min to 36" max roller height. On locking casters. ... moreLift Tables. Expands to 33' retracts to 18' 6" length.
Buy It Now
Condition: Used Location: El Paso, United States Steel Construction. Height adjustable 28"-40". Very good condition. Stands U-Line model# H-5017.
Buy It Now
Condition: Used Location: Millersburg, United States Belt speed: 10-110 FPM. Set up with 90VDC gearmotor & 115V Variable speed Penta-Drive. Conveyor was set up with a pneumatic pusher unloader at the end. ... more2-3/4" max product height. Lift Tables. We are dedicated to understanding the unique challenges and opportunities that each industry faces.
Buy It Now
$130.95 Shipping Condition: Used Location: Millersburg, United States Ermanco XenoROL 24"x 24" Steel Gravity Roller Conveyor Add-On Section 22" BF Ermanco XenoROL. Conveyor Section In Good Clean Condition. 21.5" Roller Length. ... moreLift Tables. 7/16" Hex Shaft. (1) 24" Width x 24" Length Section.
Buy It Now
$950.00 Shipping Condition: Used Location: Plattsburgh, United States Inventory # CON-639. MPN conveyor. Copy this link into your browser Manufacturer's Warranty and Support DO NOT apply. Video will open in a new window.
Buy It Now
$950.00 Shipping Condition: Used Location: Plattsburgh, United States Krups belt conveyor model KF30 2400 – 150mm, 54in long with 5in wide belt, serial # 15053-6001, year 2004. aluminum anodize base structure, adjustable ... morein height currently setup at 34.5in high. Side guides. Motor with variable frequency drive installed inside electrical panel. Inventory # CON-622.
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Model # : IS125. QC Conveyors. QC Conveyors Heavy Duty Low Profile Conveyor. Belt Length: 72". Full size truck access and forklift is acceptable. Belt ... moreWidth: 12". Office Hours 9472 Hemlock Lane N.
Buy It Now
Condition: Used Location: Middlebury, United States Conveyor chain and conveyor base are wash down, motor is standard TEFC and is not wash down duty but is inverter duty. Belt Surface: Conveyor Chain Rexroth ... moreMat Top Style. It is labeled as a weigh scale infeed conveyor.
Buy It Now
Condition: Used Location: Middlebury, United States Gear Box Model: Hytrol. Tested and works as it should 115V 1Ph. Bed Length: 11'. Height of Legs From Floor to top of Bed: 36"adjustable. Belt Surface: ... moreSmooth. Belt Width: 30". Speed (Feet Per Minute): 0-33 FPM.
Buy It Now
Free Shipping Condition: New – Open box Location: New Market, United States NEW NO BOX SURPLUS.
Buy It Now
$15.00 Shipping Condition: New Location: Loxahatchee, United States This conveyor is equipped with the latest technology and features to ensure safe and efficient operation.
Buy It Now
Free Shipping Condition: New Location: Vista, United States Big Horn T1732 Adjustable Expandable Gravity Wheel 9 Roller Conveyor Flexible Table. Model: T1732. TOOL TABLES, STANDS & CONVEYOR. Big Horn's Adjustable ... moreRoller Table is versatile and can work with planers, jointers, saws and various other tools as an outfeed stand with a length adjustability ranging from 19.5" to 54".
Buy It Now
$15.00 Shipping Condition: New – Open box Location: Chagrin Falls, United States This is for the control box only. Brand new. No original packaging. Has very little wear from being moved around.
Buy It Now
$15.89 Shipping Condition: New Location: China 1 x Photoelectric Counter. Conveyor width: 80MM. Conveyor belt length: 490MM. 1 x Desktop Conveyor Belt. Support material: PP. Get the item you ordered ... moreor get your money back. Weight: about 2KG. or Negative.
Buy It Now
Free Shipping Condition: New – Open box Location: Delta, United States Category:Conveyor Chains. Length:6.65 FT. Disconnect Switches. Butterfly Valves. Model:SERIES 800 170068. Ball Valves. Gate Valves. Knife Gate Valves.
Buy It Now
Free Shipping Condition: New – Open box Location: Delta, United States Category:Conveyor Chains. Length:10 FT. Shock Absorbers. Width:14 IN. Line Reactors. Safety and Security. Rotary Lobe Blowers. Roller Chains.
Buy It Now
$250.00 Shipping Condition: New – Open box Location: Duncan, United States New and never used Conveyor tables pulled from canceled engineering project. Conveyor motors included. Send us your list of surplus for a price! Ask us ... morefor any electronic repairs you may need, or google us for a repair quote.
Condition: Used Location: Leander, United States (1) Sealed Air A27A L-Bar Sealer. Model A27A Heat sealer. (1) Sealed Air T7H Shrink Tunnel. Model T7H Shrink tunnel. (1) Selvage Winder. All the conveyors ... moreshow evidence of prior use; nothing looks bad, just normal-used.
Buy It Now
Condition: Used Location: Millersburg, United States Belt Speed: 57 FPM. Bed Length: 54' (conveyor consists of (4) 12' sections + 4' drive and 2' tail pulley sections. Conveyor in good used condition. Lift ... moreTables. Drive Type: Center drive underside pulley take-up, RH direct drive type 37"BW. ).
Buy It Now
Condition: Used Location: United States (1) Dorner 220P-013 Open-Center Pallet/PCB Conveyor. Manufacturer: Dorner. The plastic wire holding part on the bottom has several broken/missing side ... more"teeth". Notes:This conveyor appears to be new, and everything should work 100% once you get it all wired together.
Buy It Now
Free Shipping Condition: New Location: Costa Mesa, United States Automatic feeder, automatic stop;. spiral and flexible connection between the barrel and the hopper, remove easily; barrel lower end of valve and reversing ... moreswitch, easy to clean;. feeding the motor, vibration motor vibration amplitude of the respective adjustable switch, the whole spiral can be easily disassembled to clean.
Buy It Now
Condition: Used Location: Millersburg, United States Automotion Belt Conveyor Bed Sections only. Lot of 7 Sections. Sections: 12' Length. Lift Tables. Our mission is to empower industries with the tools ... moreand solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
$99.95 Shipping Condition: New Location: League City, United States Chain, Conveyor, Replaces Fisher #RC 9177! Conveyor Chain. Replaces OEM Part Number #RC 9177 For Fisher 1 Year Limited Warranty. Compatible Part/Model ... moreNumber #RC 9177. Product Grouping Conveyor Chain.
Buy It Now
Free Shipping Condition: New Location: Vista, United States Oasis Machinery T1732S Flexible Gravity Skatewheel Conveyor. Model: T1732S. It is capable of turning 45 degrees, or attaching 2 flexible conveyors make ... morea 90 degree angle. HAND TOOLS. Max Holding Weight: 300 Lbs.
Buy It Now
$28.49 Shipping Condition: Used Location: Valley View, United States Dorner 2200 Series Conveyor 221M020400A0108 4FT x 2" x 2", does not have a motor. Appears to be in good condition. Model no: 221M020400A0108.
Buy It Now
$120.98 Shipping Condition: Used Location: Millersburg, United States Dump Hoppers. Lift Tables. Max Leg Height: 46". Min Leg Height: 34". Mounting bracket: 1"W x 8". x Width 31 in. x Height 8 in. Information and Support.
Buy It Now
Condition: Seller refurbished Location: Glencoe, United States For Sale is a Stewart Glapat Adjustoveyor Model 2580T24FBREV. The date of manufacture is 10/06. It has 24" wide belt & is reversible belt travel capability. ... moreBelt speed is 120 feet per minute. The Conveyor is 480 volt 3 phase.
Buy It Now
Condition: Used Location: United States (1) Motorized Belt Conveyor 98-1/2" L x 45" W w/ Nord 63L/4 CUS 0.25HP Motor. Model:63L/4 CUS. Notes:We connected this conveyor motor to power and turned ... moreit on to observe the conveyor run smoothly. The side that needs to be adjusted has a round-headed Allen bolt rather than a side adjustable screw head.
Buy It Now
Condition: New – Open box Location: Rochester, United States Make: Dorner. Electric: 230V, 3 Phase. Type: Belt Conveyor. Series: 2200. Belt Length: 102". Mounted on legs as pictured. Motor: Allen Bradley MPL-A320H-SJ72AA ... more1.3 HP / 1 kW. Belt Width: 6.25".
Buy It Now
Condition: Used Location: Millersburg, United States 50 FPM Roller Speed. Chain Drive Conveyor In Good Used Condition. Conveyor Consists of 3 Sections. Tested @ 220V 3-Phase. 2.25" Rollers. Accumulation ... moreType Rollers, Bearing Mounted Sprocket Drives.
Buy It Now
Condition: Used Location: Millersburg, United States Motor & Gearbox: 1Hp 230/460V 3PH Hytrol 4A 20:1 Gearbox. 8" belt width. 4.5" dia x 15.5"L tail pulleys. Drive Type: Center drive, Belt-Over Roller. Roller ... moreAxle Size: 7/16" Hex. Lift Tables. Roller Speed (Feet per Minute): 136 FPM.
Buy It Now
Condition: Used Location: Millersburg, United States Motor: 3Hp 230/460V 3PH 65 RPM Output 12.28 Ratio Gearbox. Bed Length: 78' (conveyor consists of six 12' sections + 4' drive and 2' tail pulley sections. ... moreConveyor in good used condition. Lift Tables. ).
Buy It Now
Condition: For parts or not working Location: New Berlin, United States Width for the pallet is adjustable, looks like its at 48" right now. This machine looks like it has had little use.
Buy It Now
$449.00 Shipping Condition: New Location: Horn Lake, United States Boston Gear Motor Specs. ARM 90 VOLTS. TYPE - 3336P. R.P.M. - 1750.
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States End Drive Conveyor. Model # : 2200 Series. Length: 56". Gear Ratio: 20:1. Max Speed: approx 50 feet/min. your account number during checkout. If you do ... morenot have an account No Worries! Output Power: 1/12 HP.
Buy It Now
Condition: Used Location: Millersburg, United States Conveyor In Good Used Condition. 11' Overall Length. Conveyor is 2 Sections. 2.25" Rollers. Accumulation Type Rollers, Bearing Mounted Sprocket Drives. ... moreTested @ 220V 3-Phase. Lift Tables. 50 FPM Roller Speed.
Buy It Now
$28.49 Shipping Condition: Used Location: Valley View, United States Dorner 2200 Series Conveyor 221M020400A0108 4FT x 2" x 2", does not have a motor. Appears to be in good condition. Model no: 221M020400A0108.
Buy It Now
Condition: Used Location: Millersburg, United States 50 FPM Roller Speed. Chain Drive Conveyor In Good Used Condition. Conveyor Consists of 2 Sections. Tested @ 220V 3-Phase. 2.25" Rollers. Accumulation ... moreType Rollers, Bearing Mounted Sprocket Drives.
Buy It Now
Condition: Used Location: Millersburg, United States Belt Drive. Conveyor Drive: 1/2Hp 208-230/460V 3PH Washdown Motor. Model 7200. Conveyor Size: 12" width. 37" Length. With Gast Regenair Vac/Blower R5325A-2. ... moreSet up as vacuum with perforated belt.
Buy It Now
Free Shipping Condition: New Location: United States Package Included 1* Filling Machine 1* Convey Belt 1* Electric Eye 1* Power Cable 1* Collecting Tray All Accessories for Installation.
Buy It Now
Condition: Used Location: Middlebury, United States 6"x12" Intake. Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly. We choose the carrier. ... moreWeight (lbs, oz): 915. BULLSEYE INDUSTRIAL SALES, LLC.
Buy It Now
$30.06 Shipping Condition: Used Location: Leander, United States (1) 18" Quickdraw MR Open-Center Slip-Roller Conveyor System. Manufacturer: Quickdraw. The T-slot mounting rail and black plastic rail have been machined ... moreon the inside (see photo #5); this may cause small parts to catch on the corners, we are not sure.
Buy It Now
$59.95 Shipping Condition: New Location: League City, United States BH15M49B08 CONSTRUCTION. The Hstand is floor mounted for permanent installations as opposed to tripods which are portable. Upper and lower legs are constructed ... moreof 12 ga steel. Single legs are available for applications such as curves.
Buy It Now
$59.95 Shipping Condition: New Location: League City, United States BH15M37B08 CONSTRUCTION. The Hstand is floor mounted for permanent installations as opposed to tripods which are portable. Upper and lower legs are constructed ... moreof 12 ga steel. Single legs are available for applications such as curves.
|
|
Titan Model 304 Parts Conveyor
Titan Industries Inc. Model 304 Parts Conveyor with a Leeson Direct current Permanent Magnet Motor. It looks and runs great. We used it short term to move Coffee beans. All specs are listed in pictures. Buyer pays for shipping in addition to sale price.
|
|
Conveyor, Dorner 2200 Series, Model # 240M060600D0102 (202M06-0600400D010102) 6
Conveyor Specifications: 2200Series end drive conveyor V-guide belt tracking 6" 152mm) wide beltx 6' 1829mm) long Drive shaft in position D Type 02 standard general purpose belt with fused finger splice Configuration includes standard drive and idler tail. Motor Specifications: Pacesetter Inverter Duty Gearmotor 230V. 3Phase, 60HZ 6:1 Ratio. RPM 283 1/6 HP List Price New- $1400
|
|
70427 Used-Unused- KWS Screw Conveyor, Model 9x3-3, 304 Stainless Steel, Horizon
Used-Unused- KWS Screw Conveyor. Model 9x3-3, 304 Stainless Steel, Horizontal. 9" diameter x 36" long x approximate 4" pitch screw. 10" diameter tubular bolt together trough. 10" diameter end outlet. Driven by a 3 hp, 3/60/230/460 volt, 1755 rpm motor thru a Dodge torque arm reducer, ratio 24.38 to 1, approximate 23 output rpm. ref# 70427 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
41002041 Used- Aseeco Corp Vibratory Conveyor, Model VHF-8, Stainless Steel. Pan
Used- Aseeco Corp Vibratory Conveyor. Model VHF-8, Stainless Steel. Pan 8' wide x 39-1/2' long x 4' tall sides. End discharge. Driven by a 1/3 hp, 3/60/208-230/460 volt, 1725 rpm motor. Mounted on a stainless steel base with stainless steel legs. ref# 41002041 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
41020006 Used- Conair Takeaway Conveyor, Model STC-1628, carbon steel. Approxim
Used- Conair Takeaway Conveyor. Model STC-1628, carbon steel. Approximately 16" wide x 36" long rubber belt. Driven by a 3/4 hp, 3/60/230/460 volt, 1725 rpm motor with a reducer, ratio 10 to 1. Mounted on casters. ref# 41020006 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 2fiuqm.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bifc%3E2fiuqm-13e6d4f363c-0xf1-
|
|
40800107 Used- Heat & Control 2 Directional Belt Conveyor, Model DSFC. 24" Wide
Used- Heat& Control 2 Directional Belt Conveyor. Model DSFC. 24" Wide x 80" long plastic belt. Includes(2) 1 hp, 3/60/575 volt, 1725 rpm gear motors, each mounted on the same side. Mounted on a 304 stainless steel frame. ref# 40800107 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
44611003 Used- LaRos Equipment Finger Separator Conveyor, Model EF-400-B-18. App
Used- LaRos Equipment Finger Separator Conveyor. Model EF-400-B-18. Approximately 18" wide belt with fingers, 24" inclined length x 18" long horizontal top section, approximately 55" discharge height. 1/60/115 volt. Mounted on a frame with casters. ref# 44611003 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
GARVEY CORPORATION MODEL 9600 CONVEYOR 60 INCH WITH PENTA DRIVE AND BALDOR MOTOR
YOU ARE BIDDING ON ONE GARVEY CORPORATION MODEL 9600 CONVEYOR 60 INCH WITH PENTA DRIVE MODEL KBPL-240D 115-230 VOLT 50/60 Hz AND BALDOR MOTOR C0345Q SPEC 34-6172-1909.5 HP 1750 RPM 56C FRAME ARM 91 VOLTS 5.2 AMPS FIELD 100/90 VOLT.9/1 AMP. THIS IS USED SURPLUS REMOVED FROM A SHUTDOWN FACILITY AND IS GUARANTEED WORKING. THERE IS NO CONVEYOR CHAIN ON THIS UNIT PLEASE INSPECT PICTURES. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MW) ESTIMATED RETAIL PRICE $3832.00 SHIPPING IS FOB OUR DOCK IN MESA. AZ 85205 AND WILL SHIP WORLDWIDE. PLEASE CALL OR EMAIL FOR SHIPPING QUOTE. LOCAL PICKUPS ARE ALWAYS WELCOME. International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's ... morecustoms office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your!
|
|
Eriez Model 20A 115V HI-VI Vibratory Conveyor / Feeder
This auction is for a used Eriez magnetic vibratory conveyor. The conveyor works well and is in good condition. The tray is stainless steel and is about 20" long. 5" wide at the back and about 2-1/2" deep. It has a removable rod that runs from the front to the back. There is also a small tube that is welded to the tray near the discharge end. Maybe this is to be used for de-watering? There is a small dent on the edge of the tray as shown in the photos. If you have questions, or would like to see other photos, please ask. Shipping will be at actual cost.
|
|
Rapistan - Dematic Model #1265 Accumulation Conveyor 30" Wide Year: 2006 493 ft.
Rapistan-Dematic Model#1265 Zero Pressure Accumulation 30" Wide x 493 Feet. Model: 1265 Width: 30" Operation: One-Way. Horizontal, Accumulation Bed: 10 Guage. 6- 7/16" Deep Side Channels With Bolted Construction Length: 493' Total- Mostly 12' and 10' Lengths Accumultion Zone Length: 92' of 24" Zones w/ Dual Sensors/ Remaining 401' Are 36" Zone Length w/ Single Sensor Drive: 350 Lb. Pull Charge End Drive w/ 44" of Belt Takeup- Pneumatic Takeup Drive Pulley: Solid Steel in Diameters From 5 9/32" to 6 9/16" Depending Upon Feet Per Minute Speed End Pulley: 5 1/2" Diameter At Charge End and Discharge End Rollers: 1.9" Diameter 16 Guage Galvanized Steel with 7/16" Hex Axle- Mostly High Speed But Some Beds Have Low Speed Rollers. Axles: 7/16: Hex Steel Belt: Flat 45 mm. 1.77' ... moreWide Belt, With Polyurethane Body and Armid Fiber Reinforcement With Anti-Static Nylon Back. Speeds: 60- 200 Feet Per Minute. Motors and Reducers: 3/4 H.P. 3 H.P. 230-460 3 Phase"C" Face Electric Motor and Dodge Tigear Right Angle Reducer Capacity: 100 lbs. per Foot Minimum Product Weight: With 3" Roller Centers 1 lb Product On A Single Sensor To Depress The Sensor. With Products At Least 9" Long. 2 lb Product On A Dual Sensor To Depress The Sensor. Sensor Assembly: 7/8" Diameter Counter Weighted Sensor Roller Supported By Plastic Arms That Pivot On Axle Of Carrier Roller. System Includes 493 Feet Of 30" Wide Zero Pressure Accumulation Conveyor And 4- Charge End Drive Units. 92' Run Has 1 3/16" Formed Guard Rail. Guard Rail Built Into Bed Frame) 401' Remainder Has 4" Formed Guard Rail. Guard Rail Built Into Bed Frame) Location: F.O.B. Glencoe Mn 55336 Questions: Call or Email Tim Petersen- 763-218-5953.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13ea3d9780a-0x106-
|
|
Rapistan Model 960 Tapered Live Roller Curve Conveyor
Rapistan Model#960 Tapered Live Roller Curve 180 Degrees Model 960 Curves are 180 Degree. Disc operated curves with a small radius. This allows for use with two parallel conveyors that area a short distance apart. A 230-460 Volt 3 Phase motor drives an 8" or 10" diameter wheel that transmits power to a disc by friction. The turning disc drives the tapered rollers by contact with the bottom. Inside portion of each roller. The rollers are 14 ga. Tapered zinc- plated stell tubing. They are 1 5/8" outside diameter at the small end and 2 1/2" outside diameter at the large end. The curve bed is 10 gage painted channel. Load capacity is the same or greater than that of ajoining Rapistan Conveyors. Continuous channel guard rail is supplied on the inside and outside of each curve. Model 960 curves can be either floor supported ... moreor ceiling supported. Far left ouside guard rail to far right outside guard rail = 5' 5/8" 2- Curves available Auction is for one. Questions call or email: Tim Petersen 763-218-5953.
|
|
Rapistan Model #1102 Live Roller Conveyor 24" Wide-Nice
Rapistan- Dematic Model#1102 Belt Driven Live Roller Conveyor 24" Wide. 288' With 4 Center Drives. A Smooth. Quiet Running Belt Driven Conveyor Used Widely for Side Loading& Off Loading. Ideal for Totes. Drums, Cans, Cartons, Bagged or Bundled Items. Model#1102 Conveyor Features Adjustable Drive Pressure From Cam Adjustable Pressure Rollers Below the Belt. Width: 24 1/4" Length: 288 Feet Total Rollers: 1.9" Diameter on 3" Centers Drive: Qty. 4 Rapistan Center Drives of Various H.P. 230-460 3 Phase Bed Lengths: 23 qty. 12' beds& 2 qty. 6' beds Belt: 8" Wide Smooth PVC-120 Belting End Pulleys: 4" Diameter Pulley with a 1 7/16" Diameter Shaft Speed; Will Adjust to Customers Requirements- Not less than 20 F.P.M. Supports: R-1400 Rapistan Supports 24" Wide/ 24" 36" Adjustable ... moreHeight Weight: 9.400 lbs. Questions: Call or Email Tim Petersen 763-218-5953 Location: Glencoe. Mn. 55336 Condition: These Conveyor Units Have Been Checked Out. Cleaned& Roller Bearings Have Been Oiled.
|
|
Rapistan Model #1256 Urethane Belt Transfer, Conveyor.
RECONDITIONED- Rapistan Model#1256 Lineshaft Driven Urethane Belt Transfer- Slave Driven. Dimensions: 18 1/4" Wide x 36" Long. Roller: 1.9" Diameter Rollers Lineshaft Driven Transfer: 5 Strands Urethane Belt. Controls: 115 Volt Solenoid Valve Included. Slave Driven: From#1256 Lineshaft- See My Other Auctions. Questions: Call or Email Tim Petersen- 763-218-5953. Item Location: Glencoe. MN. 55336. Item has been reconditioned with new roller bands and new Urethane Belts. Item has also been cleaned and checked out completely.
|
|
45012001 Used- Meyer Machine Vibra-Flex Vibratory Conveyor, Model YF II 24 6, 30
Used- Meyer Machine Vibra-Flex Vibratory Conveyor. Model YF II 24 6, 304 Stainless Steel. Pan 24” wide x 168” long x 6” tall sides. 12” X 24” Top end feed, 6” x 24” end bottom discharge, top cover. Requires vibratory motor. Mounted on a stainless steel frame. ref# 45012001 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
Hytrol Conveyor Model TA
Hytrol Conveyors Model TA. All were working when removed from business. One conveyor will need a belt soon. However is funcrional as is. Forklift and dock service available. Size 8.6 feet longX 32 inches wide Belt size 25 1/2 inches. Serial numbers 253697. 289318, 289321
|
|
Hytrol Conveyor Model TA 1 section Belt 21" wide 8' long speed 37.5' per minute
Hytrol Conveyor Model TA 1 section Belt 21" wide 8' long speed 37.5' per minute Hytrol Model TA 1 sections Belt 12" inch wide 8' feet long adjustable height 47 1/2" inch and lower Hytrol Conveyor Model TA 1 sections Belt: 12" inches wide 8' feet long Maximum height 47 1/2" inch including 6 1/2" inch wheels Speed: 37 1/2' feet per minute Motor: Relience Electric Catalog no. P56H5069U-RX Frame: EC56C Type: P HP: 1/2 RPM: 1725 208-230/ 460-480 Volt 2.4/2.4 Amp 3 phase 60 Hz SF 1.15 Rating-Continuous Ins Cl-F Has start/stop button Used taken from working plant Email or call 920-684-9999 w/questions PLEASE READ PRIOR TO BIDDING You are buying the above as is(If you are not sure what that means. Look it up AS IS) This means don't assume anything. If you have a question, ask. If it is not listed ... moreas NEW, then don't assume that it is.It is sold as seen, as is. Unless an item specifically states that it has been tested, it has not been tested. If you would like an item to be tested and can tell us how to do so, please call/ email us and we will make every attempt to do so. However, please understand that our business is rigging and we are not electrical engineers. Most items were removed from working machines but are still sold AS IS.Feedback will only be left if you leave positive feedback. EBAY has removed the sellers right to post anything other than positive feedback and we feel that positive feedback should be mutually reciprocated. Lastly, if you try to threaten use of negative feedback to get something that was not listed or a service that was not listed, we will forward the request to EBAY without notice. Shipping Buyer is responsible for all shipping/insurance costs. Shipping size and weight for the unit are as follows: 788 pounds with the pallet. Dimensions are 96"x16"x41" high. We will load for you at no additional charge from a commercial building with a loading dock and the driver does not need to come inside. We will provide your shipper
|
|
Hytrol Conveyor Model TA 2 section Belt 20" wide 21' long speed 60' per minute
Hytrol Conveyor Model TA 2 section Belt 20" wide 21' long speed 60' per minute Hytrol Model TA 2 sections Belt 20" inches wide 21' feet long adjustable height 37" inches and down Hytrol Conveyor Model TA 2 section Belt: 20" inches wide 21' feet long Current 35" inches includes 6 1/2" wheels could be raised another 2" inches Speed: 60' feet per minute Motor: Relience Electric Catalog no. CS6S1S90 Frame: FF56C Type: CS HP: 1/2 RPM: 1725 115-208/230 Volt 8.6-4.3/4.3 Amp Single phase 60 Hz SF 1.5 Rating-Continuous Amb 40 Ins Cl-F 200 Volt minimum 230 volt plugin Reducer 4 AC 30-1 RH Starter Square D Start stop button 1HP max 115-230 Volt Used taken from working plant Email or call 920-684-9999 w/questions SHIPPING PLEASE READ PRIOR TO BIDDING You are buying the above as is(If you are not ... moresure what that means. Look it up AS IS) This means don't assume anything. If you have a question, ask. If it is not listed as NEW, then don't assume that it is.It is sold as seen, as is. Unless an item specifically states that it has been tested, it has not been tested. If you would like an item to be tested and can tell us how to do so, please call/ email us and we will make every attempt to do so. However, please understand that our business is rigging and we are not electrical engineers. Most items were removed from working machines but are still sold AS IS.Feedback will only be left if you leave positive feedback. EBAY has removed the sellers right to post anything other than positive feedback and we feel that positive feedback should be mutually reciprocated. Lastly, if you try to threaten use of negative feedback to get something that was not listed or a service that was not listed, we will forward the request to EBAY without notice. Buyer is responsible for all shipping/insurance costs. Shipping size and weight for the unit are as follows: 788 pounds with the pallet. Dimensions are 120"x48"x42" high. We will load for you at no additional charge from
|
|
Hytrol Model 190-RB Power Belt Conveyor, 200' LONG x 42" Wide, 1997 23901
in titles& description Name: Hytrol Model 190-RB Power Belt Conveyor. 200' LONG x 42" Wide, 1997, Ticket# 23901, Model: 190-RB, Size: 42" WIDE X APPROX 200' Manufacturer: Hytrol, Item located at: Greeneville. TN, Condition: Used, Terms& Condition: As is where is, Description: Hytrol Model 190-RB Power Belt Conveyor Size: 200 ft. LONG x 42 in. Wide Variable Speed Drive Ticket: 23060 | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
1997 Hytrol Model 190-RB Power Belt Conveyor, 200' LONG x 42" Wide 23902
in titles& description Name: 1997 Hytrol Model 190-RB Power Belt Conveyor. 200' LONG x 42" Wide, Ticket# 23902, Model: 190-RB, Size: 42" WIDE X APPROX 200' Manufacturer: Hytrol, Item located at: Greeneville. TN, Condition: Used, Terms& Condition: As is where is, Description: Hytrol Model 190-RB Power Belt Conveyor Size: 200 ft. LONG x 42 in. Wide Variable Speed Drive Ticket: 23902 | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
Direct Line Products Conveyor Model DL-12
Up for auction is a direct line products conveyor model number DL-12. Unit has been tested and is fully operational. 115 Volts. 33" long x 11" wide x 17" Tall. Serial Number: DL1870.
|
|
#SLS1H79 Machine Turbo Chip Conveyor Model-6475-86ZZ 15209LR
Machine Turbo Chip Conveyors Used Motor Model-C4T17N219A Volts- 280-230 460.84/92.42/46 RPM- 1725/1425 HP- 1/4 HZ-60/50 3-Not 8" in. Wide Chip Track Dimensions L113"xH62"xW42" weight 1040 lbs. As is Question please call 517-294-8737 Check out my! Shipping Item is located in Howell Michigan. Great pick up item. For a freight quote please send me your zip code and state if its a business address with a way to unload a semi trailer or residential address and you need a lift gate. Buyer pays all shipping expenses. Thank you Return Policy Within 14 days after recieving this item and if you believe that I misrepresented it. Please email me to set up a return. All return postage or freight will be payed by the buyer and it must be returned in the same condition that it was shipped. Thank You Liability Seller makes no claims as ... moreto the equipments compliance to Starlight Supply Inc. Or any other safety standard, and is held harmless regarding any cost resulting from non-compliance. The seller and its agents are to be held harmless for any personal injury or property damage resulting from the handling or use of this equipment or items. It is the buyer's responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer's responsibility as to the safe handling and operation of this equipment or items Be sure to add me to your!
|
|
43429004 Used- Key Technology 5 Lane ISO-FLO Vibratory Conveyor, Model 432553-1,
Used- Key Technology 5 Lane ISO-FLO Vibratory Conveyor. Model 432553-1, 304 Stainless Steel. Maximum stroke approximately 7” Overall conveyor pan 64” wide x 251” long x 5” deep. 5) Lanes, 1) 10” wide, 2) 12” wide x(2) 15” wide. 3) Middle lanes have staggered end bottom outlets. Driven by(2) 1.80kw, 60hz, 460 volt, 855 rpm motors. Mounted on a stainless steel frame. Built 2004. ref# 43429004 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
Dorner Conveyor (12' x 3.5") Model #220M041200A0959 Great Condition~4 Available
Dorner Conveyor(12' x 3.5" Model#220M041200A0959 Great Condition~4 Available*WE CONSIDER FAIR OFFERS* MONEY BACK GUARANTEE ON EVERYTHING* FEATURED ITEM(S) 1) Used Dorner Conveyor Model#220M041200A0959. Measures 12' x 3.5" This item is used but in great condition. It was only used for a short time and has been in storage for several years. At the time of this listing we have(4) in stock. We no longer have the motors for these convenors. Please contact for additional information or pictures. To make an offer on more than one or all of these conveyors, for information on COD if you are located close to Denver CO or If you would like to speak to us on the phone. If you are within Driving Range of Denver we may be able to work out a deal on the shipping cost. We may be able to delivery one or more conveyors to you. This item ... morewill be shipped within 48 hours of payment confirmation with tracking. Signature confirmation and Insurance. Insurance will be paid by seller. You can make a'one time payment' with out a paypal account with you credit card through paypal. Please contact if you need assistance. Please contact us with form of payment within 48 hours of the auction end or risk item being relisted. Payment are due within 48 hours after auction end or a non-payment dispute may be filed with ebay. If you cannot pay within 48 hours of auction end please contact us to resolve. We reserve the right to cancel bids at anytime and for any reason. Bidders with zero feedback may be deleted unless you contact us FIRST before bidding. All sales are final. Colorado Sales Tax is 4% for Colorado Residents. If the invoice is not correct please do not pay until you have contacted us first to resolve the matter. BOOK PURCHASES* All books are shipped in poly-bags or postal-paper and with tracking and delivery confirmation(domestic) Most orders are shipped within 24 hours of payment confirmation. Shipping can be combined but costs may vary so please contact for details. Purchases over $100 will be shipped with i
|
|
Dorner Model 0503 Slug-O-Matic Conveyor - 36" Long - 5" Wide
C9468 Dorner Model 0503 Slug-O-Matic Conveyor- 36" Long- 5" Wide- 115VAC- Single Phase- 1/20 Hp- Runs- Cog belt between gearbox and conveyor shaft is worn as shown in last picture. But still functions well- Wires 5 and 8 are start winding wires- Wires 1 and 4 are run winding wires. Please review all the pictures. They are a part of the description. We will combine shipping whenever possible. Not responsible for customs charges.
|
|
Hytrol Conveyor Model TH
From Hytrol Website. The Model TH is designed to handle empty cardboard boxes and paper trash. Bed- 14 ga. formed steel slider bed bolted between two 7-1/2" deep x 12 ga. formed steel side channels with 6" high guards. Belt Widths: 11-1/2" 17-1/2" 23-1/2" 29-1/2" 35-1/2" 41-1/2" 47-1/2" 53-1/2" Center Drive(standard) Motor- 1 HP standard. 2 HP max. Adjustable Floor Supports Available, Capacity- Maximum load per linear ft. of conveyor 10 lbs. Not to exceed rated capacities,
|
|
VERY NICE DORNER 10' X 3-1/2" WIDE POWERED BELT CONVEYOR MODEL 2150U0410A01/03
VERY NICE DORNER 10' X 3-1/2" WIDE POWERED BELT CONVEYOR MODEL 2150U0410A01/03 Prev Stop Play Next You are bidding on a Dorner Powered Belt Conveyor. Model: 2150U0410A01/03. This is a very nice conveyor in excellent condition and it is fully guaranteed. 10' Long 3-1/2" Wide Belt 2-1/2" X 4" Frame Equipped with Electric Motor and Speed Control We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery.
|
|
Model 996 ROUND BELT LIVE ROLLER CURVES Slave Driven CONVEYOR System
SHOP CATEGORIES. SHOP NEWSLETTER. Add my Shop to your Favourites and receive my email newsletters about new items and special promotions! HELPFUL LINKS. Visit our Store Model 996 ROUND BELT LIVE ROLLER CURVES Slave Driven CONVEYOR System Click The Pictures To Enlarge. Our customer support hours for emails are from 10am-5pm EST Monday- Friday. PLEASE READ ENTIRE DESCRIPTION BEFORE PLACING ANY BIDS OR PURCHASING THIS ITEM! THIS UNIT IS LISTED FOR LOCAL PICK UP ONLY- BUYER IS RESPONSIBLE FOR ARRANGING OWN PICK UP AND/OR TRANSPORT. WE WILL DISSEMBLE AND PALLETIZE ALL SECTIONS AND PARTS AND PREPARE ALL FOR TRANSPORT- FREIGHT CHARGES PAID BY BUYER- EMAIL OR CALL US WITH QUESTIONS. This is for a Model 996 ROUND BELT LIVE ROLLER CURVES Slave Driven CONVEYOR System(power rollers. Non-belted) This system has been used at our warehouse for about a year ... morefor light duty products handling. It is fully operational. It has very low use and comes in overall great condition. Please review all pictures and ask questions if needed. INCLUDED: Model 996 Round Belt Live Roller Curves- Slave Driven 22BF/ 24.25OAW/ 6.25FD/ 1.9-TRD/ 3 RC(1) Slave Drive[410/996] from Main Belt Unit(2) 90-degree Curves w/ Tapered Rollers(1) 24 lg END Tangent Bed(4) Twin leg system(2) Single legs- Inside Radius- 26-9/16" Outside clearance- 10' Inside clearance: 6' PICTURES SHOW THE ACTUAL UNIT YOU'RE BIDDING ON- PLEASE CONTACT US WITH ALL QUESTIONS YOU MAY HAVE! THIS LISTING IS FOR ONE SYSTEM- WE HAVE 2 IDENTICAL SYSTEMS AVAILABLE. WE ALSO HAVE OTHER CONVEYOR SYSTEMS AND PARTS AVAILABLE- PLEASE SEE OUR OTHER ITEMS! About Us, Payment, Shipping, Returns, Contact Us, About Us At Guzu. Our intent and mission is to develop innovative ways to salvage and recycle electronics while diminishing the US Carbon footprint. There are over 3 billion consumer electronics in homes all across America and over 500 million consumer electronics sold annually. Many of these goods are disposed of, stashed away and some are sold on resale sites. We pro
|
|
ECM Motor Co. Model: 3316-67B Conveyor Motor w/TAC
ECM Motor Co. Model: 3316-67B Conveyor Motor w/TAC 90 Volts PM Type DC 125HP 1.5 AMP Cont. Don't forget to Check Out other Conveyor Belts we posted in various sizes CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, ... moreMasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free li
|
|
Hytrol Model ABEZ; Live Roller Accumulation Conveyor; 30” wide x 27'-6" lg
ebay template Hytrol Model ABEZ; Live Roller Accumulation Conveyor; 30” wide x 27'6" lg Item will only include what is explicitly stated in the detail description below. Please do not assume accessories listed in the manufacturer description will be included if they are not stated as being apart of this specific auction. If you have any question please contact us. ORIGINAL UNIT. PALLETIZED DETAILS: This listing is for a Hytrol Model ABEZ; Live Roller Accumulation Conveyor; 30” wide x 27'6" lg. This was recently liquidated from a local distribution facility. It is in good overall condition with normal signs of use. It has been tested and is in good operational condition. Hytrol Model ABEZ; Live Roller Accumulation Conveyor; 30” wide x 27’6" lg Belt Driven Live Roller(Zero Pressure Type) EZLogic® Accumulation System ... moreUSES: One way accumulation of products without a build-up of line pressure. Product may be released in singulation or slug fashion SPECS: Nominal width: 30" Length: 27'6" Long 6" wide belt/ 27” BF/ 30"OAW/ 6.5" deep frame. Capacity: Maximum load per linear foot of conveyor = 150 lbs. Frame: 6 ½ in. x 12 ga. powder painted formed steel channel frame bolted together with butt coupling; color = med. Blue Belt: 6" wide; flat- Black Ultimate 140 SD. End Pulleys: 4 in. dia. with 1 7/16 in. dia. shaft at bearings. Machine crowned. Snub Idler: Adjustable 2 1/8 in. dia. pre-lubricated ball bearings. Return Idler: Adjustable 1.9 in. dia. pre-lubricated ball bearings. Bed Sections: 1) 10' Lg Interm. Bed w/ End Pulley Assembly(1) 7'6" Lg Interm. Bed w/ End Pulley Assembly(1) 10' Lg Interm. 1) Center Drive: To be placed in any section of conveyor 7’6” or longer. Center drive is 18 in.OAW on all widths. Drive Pulley: 8 in. dia. with 1-7/16 in. dia. shaft at bearings. Take-Up: Take-ups in center drive. Provides 16 in. of belt take-up. Motor: 1 HP; 208/230/460/575V–3 Ph. 60 Hz. Totally Enclosed C-Face; Sealed worm gear C-Face speed redu
|
|
16' Hytrol Elevating Conveyor with 30" lift Model TA
16' Hytrol Elevating Conveyor with 30" lift Model TA 16' Hytrol Elevating Conveyor System with 30" lift between two conveyors Model TA 16' conveyor length 18" conveyor belt 30" variable lift this unit can power drive the feed conveyor air operated all regulators. Controls and switches included 3/4 hp. 230/460 volt motor serial# 244639 In excellent condition Manufactured by Hytrol Conveyor Co. Shipping size and weight are as follows: Unit weighs 2.195 pounds. Cannot be shipped on a pallet but can be moved with one forklift and a skilled forklift driver. Dimensions for shipping are 17' long x 42" wide x 8'4" tall. Buyer is responsible for all shipping/insurance costs. We will load for you at no additional charge from a commercial building with a loading dock and the driver does not need to come ... moreinside. We will provide your shipper with a bill of lading and any other paperwork you require to ship the unit; please fax additional paperwork to us after payment has been made. Please note that Wisconsin residents will be required to pay 5% sales tax if you aren't exempt. We require payment within 3 days of purchase. Please call 920-684-9999 or email us via ebay with any questions. PLEASE READ PRIOR TO BIDDING You are buying the above as is(If you are not sure what that means. Look it up AS IS) This means don't assume anything. If you have a question, ask. If it is not listed as NEW, then don't assume that it is.It is sold as seen, as is. Unless an item specifically states that it has been tested, it has not been tested. If you would like an item to be tested and can tell us how to do so, please call/ email us and we will make every attempt to do so. However, please understand that out business is rigging and we are not electrical engineers. Most items were removed from working machines but are still sold AS IS.Feedback will only be left if you leave positive feedback. EBAY has removed the sellers right to post anything other than positive feedback and we feel
|
|
#SLS1H79 A.R.M.S. Transfer Conveyor model# TC2217 #12044LR
A.R.M.S. TRANSFER CONVEYOR used has scoops on belt roller is magnetized model# TC3034 Ser# 921808 BELT DIMENSIONS: width: 22" length: 18 Scoop size: 2" x 1/4" MOTOR INFO: Unimount 125 U.S. Motor HP: 1 3 Ph 60 Hz 230/460 CONVEYOR: 460/3Ph/60Hz weight: 1000 lbs. Dimensions: 44"W x 20 ft.L x 40"H As Is Question please call 517-294-8737 Check out my! Shipping Item is located in Howell Michigan. Great pick up item. For a freight quote please send me your zip code and state if its a business address with a way to unload a semi trailer or residential address and you need a lift gate. Buyer pays all shipping expenses. Thank you. Return Policy Within 14 days after recieving this item and if you believe that I misrepresented it. Please email me to set up a return. All return postage or freight will be payed by the buyer and ... moreit must be returned in the same condition that it was shipped. Thank You Liability Seller makes no claims as to the equipments compliance to Starlight Supply Inc. Or any other safety standard, and is held harmless regarding any cost resulting from non-compliance. The seller and its agents are to be held harmless for any personal injury or property damage resulting from the handling or use of this equipment or items. It is the buyer's responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer's responsibility as to the safe handling and operation of this equipment or items. Be sure to add me to your!
|
|
#SLS1H79 A.R.M.S. Sorting Conveyor model# TC3034 #12043LR
A.R.M.S. SORTING CONVEYOR used Long size has smooth belt model# TC3034 Ser# 921811 BELT DIMENSIONS: width: 30" length: 36' MOTOR INFO: Unimount 125 U.S. Motor HP: 3 3 Ph 60 Hz 230/460 CONVEYOR: 460/3Ph/60Hz weight: 2660 lbs. Dimensions: 48"W x 37 ft.L x 44"H As Is Question please call 517-294-8737 Check out my! Shipping Item is located in Howell Michigan. Great pick up item. For a freight quote please send me your zip code and state if its a business address with a way to unload a semi trailer or residential address and you need a lift gate. Buyer pays all shipping expenses. Thank you. Return Policy Within 14 days after recieving this item and if you believe that I misrepresented it. Please email me to set up a return. All return postage or freight will be payed by the buyer and it must be returned in the same condition ... morethat it was shipped. Thank You Liability Seller makes no claims as to the equipments compliance to Starlight Supply Inc. Or any other safety standard, and is held harmless regarding any cost resulting from non-compliance. The seller and its agents are to be held harmless for any personal injury or property damage resulting from the handling or use of this equipment or items. It is the buyer's responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer's responsibility as to the safe handling and operation of this equipment or items. Be sure to add me to your!
|
|
#SLS1H79 A.R.M.S. Sorting Conveyor model# TC2212 #12042LR
A.R.M.S. SORTING CONVEYOR used small size has smooth belt model# TC2212 Ser# 921809 BELT DIMENSIONS: width: 20" length: 13' MOTOR INFO: Unimount U.S. Motor HP: 1 3 Ph 60 Hz 230/460 CONVEYOR: 460/3Ph/60Hz weight: 780 lbs. Dimensions: 44"W x 15 ft.L x 40"H As Is Question please call 517-294-8737 Check out my! Shipping Item is located in Howell Michigan. Great pick up item. For a freight quote please send me your zip code and state if its a business address with a way to unload a semi trailer or residential address and you need a lift gate. Buyer pays all shipping expenses. Thank you. Return Policy Within 14 days after recieving this item and if you believe that I misrepresented it. Please email me to set up a return. All return postage or freight will be payed by the buyer and it must be returned in the same condition that ... moreit was shipped. Thank You Liability Seller makes no claims as to the equipments compliance to Starlight Supply Inc. Or any other safety standard, and is held harmless regarding any cost resulting from non-compliance. The seller and its agents are to be held harmless for any personal injury or property damage resulting from the handling or use of this equipment or items. It is the buyer's responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer's responsibility as to the safe handling and operation of this equipment or items. Be sure to add me to your!
|
|
Clamco heat tunnel with conveyor model 850MB
Clamco heat tunnel with conveyor model 850MB. Serial# 4375, painted steel construction, variable controls for conveyor speed and tunnel temperature, overall dimensions of conveyor 14ft long x 22in wide x 36in high, inside dimensions of heat tunnel 27' long x 15in wide x 8in high, on casters. 220V, 1ph, 60hz, 27A Domestic and shipping prices may vary upon confirmation of buyer shipping address. VISIT US AT FOR OUR COMPLETE MACHINERY INVENTORY PAYMENT P AYMENT: We accept pay pal. Wire transfers, visa, master card( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped. SHIPPING All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage up to 30 days max. These charges are non refundable if you decide to cancel the purchase of the item after this ... moretime. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. Skidding fees range from a minimum of 100.00$US or more. Shipping cost of 100$US is applicable only to Montreal island for a skid of 4 feet x 4 feet x 4 feet with 500lbs as the weight. Any damages or missing items must be noted to the freight driver at the time of delivery AND WRITTEN ON THE BILL. OR NO CLAIM CAN BE MADE AFTER! TERMS OF SALE Some items are offered“Used-As-Is” UNLESS IT’S NOTICED. This does not mean that the item does not work; it just means that we have not run this item in production ourselves and we don’t have the expertise to thoroughly test it. Inspection: Anyone is welcome to come and inspect an item in person during regular business hours Monday thru Friday 8:00 am to 5:00 pm EST. If you can’t come see the item yourself. Then let us know what additional information or photos you need in order to make your decision and we will do our best to get it to you. CONTACT US IF YOU HAVE ANY QUESTIONS PLEASE CALL MARTIN LESPERANCE(514) 582-5852 OR email us.
|
|
Hytrol conveyor, Powered curve,tapered live rollers, model 138-LRC
Hytrol Model 138-LRC powered curve conveyor 12 inch wide powered rollers 1/2 horsepower 3 phase drive. Easily converted to single phase if needed Reversible direction of travel excellent working condition. Ready to run, needs nothing adjustable legs and adjustable guide rails We will secure to pallet and load at no charge for more info or pictures call John 785-764-9771
|
|
Auto tie Horizontal American Baler/Bailer with conveyor and shredder Model 10447
AMBACO Model 10447 Auto-Tie Horizontal Baler Application: Conveyor Fed/Air Conveyed. Shredded Secondary Fibers, Waste Paper, Paper Trim, Cuttings, SBS, Chipboard, Release Paper and OCC Normal wear for used baler. Item was used baling newsprint and corrugated until September 2013. Factory stopped baling paper while unit was working great. Video of unit in operation is available. Bale Size 26” x 36” x 0” to 80” 72” bale length = 40 cu. ft. 66 x 91 x 0 to 203 cm– 182 cm bale length = 1.13 cu.meters) Bale Weight 1000# 40 cu. ft. on shredded corrugated. 453 kg– 1.13 cu.meters) 1200# to 1500# bale on paper trim. 544kg to 680 kg) Operating Rate 4 compression cycles per min. under load@ 25 cu. ft. 7 cu.meters) per cycle. 6000 cu. ft. 170 cu.meters) per hr. note that shredded corrugated has a feed density of 2 to 3#cu.ft. 32 kg to 48 kg/cu.meter) ... moreConstruction Bolted from heavy plate and structurals to allow for eventual replacement of wearing parts. Density Control Automatic hydraulic 4-way tension on extrusion chamber with bale density maximizer. Retainer dogs in bale chamber to prevent“springback” and insure maximum volumetric capacity. Bale Tying Fully automatic on signal from bale length measurer. Five wires on each bale automatically fed and tied simultaneously. Wire feed system for 12-gage(2.68 mm) coil wire. Feed Control Photocell actuates full cycle when blocked off by material deposit in feed hopper. Hydraulic System High/Low pumping system with differential circuit for optimum efficiency. AMBACO cushion shift valves. Pilot-operated and internally mounted in manifold block for ease of maintenance, eliminating 70% of pipe connections. Tell-tale filters in suction lines accessible without opening tank. Electrical System 20HP. 230/460/3 phase, 60 Hertz Flange-type motor, O.D.P. with integral pump mounting to assure accurate alignment. Motor starter and transformer. AMBACO Solid State Electrical Control Circuit(UL approved) with L.E.D. conditions display. Hand-Auto Selector Switch so that all
|
|
Ramsey Thermo Conveyor Belt Speed Sensor Model# 61-12C
Ramsey Thermo Conveyor Belt Speed Sensor Model# 61-12C This is used and untested by us. Came from a box of spare parts from a mine. will ship international.
|
|
Hytrol Chain Driven Live Roller Pallet Conveyor MODEL 25 CRR
Hytrol Chain Driven Live Roller Pallet Conveyor MODEL 25 CRR 3/4 HP 3 PH 208/230/460 VOLT ROLLER WIDTH 103x52 EXCELLENT CONDITION Check out my other items! Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. ALL ITEMS ARE SOLD"AS- IS. WHERE- IS" AND WITH ALL FAULTS. ITEMS ARE DESCRIBED TO THE BEST OF OUR KNOWLEDGE, HOWEVER, WE THE SELLER MAKE NO GUARANTEES REGARDING ACCURACY, ERRORS OR OMISSIONS IN ITEM DECRIPTIONS AND MAKE NO WARRANTY, EXPRESS OR IMPLIED AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ITEM.
|
|
HYTRO Model TR Belt Conveyor 10” X 70” Motor ½ hp 120/208/240 Volt 1 phase
This is a chain drive conveyor. It came from a closed factory. It measures 11 inches between sides and the belt is 10 inches wide. Overall length is about 70 inches. I guarantee it to be in good operating condition. We can arrange freight shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Turbo-Conveyor Model 6297-8003 Steel Belt Chip Conveyor
Liberty Machinery Company You are looking at: Used- Turbo-Conveyor Model 6297-8003 Steel Belt Chip Conveyor* Serial No. 368802 New- N/A LMC# 34832 SPECIFICATIONS: Conveyor Run 30" Conveyor Rise 48" Top of Conveyor- Discharge 56" Conveyor Flights 1-1/2" Belt Width 5" Track Width Opening 22" X 10-1/2" Ratio 176:88 Conveyor Speed 9.7 RPM Motor Speed 1720 RPM Motor Power.25 HP Electrics 208-230V/460V/ 3 Phase/ 60Hz Approximate Dimensions 120"L X 20"W X 58"H Approximate Weight 600 Lbs. EQUIPPED WITH: Steel Conveyor Steel Rollers for Conveyor Adjustable Roller Bearings*Preliminary Specifications Subject to Verification. Buyer is required to set up shipping All sales are"As-Is" F.O.B. Lincolnshire, IL. You are welcome to inspect any machine with arranged appointment. We will email additional ... morephotos as requested. Buyer is responsible for all freight and shipping costs. We are happy to assist in trucking and shipping arrangements. Please call(847) 276-2761 with any questions. Payment requirements If we do not receive payment for this item within 7 days of auction end. We reserve the right to relist the item without further notice. An automatic"Non-Payment Item Dispute" will be opened after 7 days. All purchased items must be picked up from our selling location within 21 days of"award of sale" Items remaining on our premises after 21 days will be subject to a warehousing charge of $25.00 per day. Hours of Operation Liberty Machinery Company's normal business hours are 8am- 4pm CST Monday thru Friday. Bids/Offer received during Off-Hours. Weekends, and/or Holidays will be reviewed the following business day. You may also check us out on our website at LibertyMachinery.com Also please check out our eBay store for other similar items. Click Pictures To Enlarge-
|
|
Rapistan Demag Automatic Conveyor System model 0063-26aac 150'
Rapistan Demag automatic conveyor system. 30" wide by an estimated 150 foot long forms a U shape. Model k0063-26aac. Comes apart in 12' sections with removable rollers for eas of transport. Includes power panel showen. NOW DISASEMBLED and ready for pickup. In South Kansas City Kansas area. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1440c737917-0xdb-
|
|
*Used Portable Conveyor Belt Assembly*Material Handling Tool*Model 89*Working*NR
Used Portable Conveyor Belt Assembly*Material Handling Tool*Model 89*Working*NR click to Enlarge click to Enlarge click to Enlarge Description: This is for PICKUP ONLY at R&R Industries Inc. 195 Rocus St, Springfield, MA 01104! This is for the pictured Portable Conveyor Belt Unit, which was retired by the USPS. It's a fixed incline type, with the working surface measuring 15'9" long to the clearance type bar, then goes another 13" and it's 29" wide. A nice addition for the right application. THANKS FOR TAKING A LOOK! For questions/negotiations, call Bruce at 413-733-2118. What you see in the Pictures, is what is Included, so please don't'Assume' that there is a box, instructions, or other parts/pieces unless you see them! Payments other then Paypal must be approved PRIOR to bidding! Shipping: This ... moreis for PICKUP ONLY at R&R Industries Inc. 195 Rocus St, Springfield, MA 01104! NO SHIPPING unless pre-arranged with Bruce at 413-733-2118, PRIOR to the End Of Auction! Payment: ATTN: Many of my Auctions contain items that I have no history on. Therefore Smoke/Odor Free cannot be guaranteed! Re: FEEDBACK-Feedback will be returned after the winner is satisfied& has already left it-Sorry, but this is how it must be! I am not able to accept Credit/Debit Cards directly! ALSO-Questions asked within the last 12 hours of an Auction may not be answered(Only have computer access Mondays, Tuesdays, Fridays) OFFERS ALWAYS CONSIDERED! inkfrog terapeak. I000000.
|
|
DORNER FLAT BELT CONVEYOR 4100 SERIES MODEL# 669683
PLEASE READ& LOOK BEFORE BID- DORNER FLAT BELT CONVEYOR MODEL: 669683 ORDER# 122671 USED IN GREAT CONDITIONS WITH MINOR SCRATCHES RUN GREAT MEASURE: 18 x 4 x 3 inches WEIGHT: 15 lb NO MORE PARTS OR ACCESSORIES ONLY SOLD AS IS PRESENTED
|
|
Eriez Magnetic Vibrating Conveyor Shaker Model 70B
Vibrating Conveyor Shaker from Eriez Magnetics*Picture shows all three of our shakers. But this auction is for one shaker only. It is used, but it is in good working condition guaranteed. Please see our return policy. Eriez still makes this exact shaker, and in the words of the represenatative they last forever and a day. They are very well made. Shipping quotes can be determined prior to sale. Customer is also welcome to come inspect items at our location. We get at least a 69% discount with our carrier. But customer is welcome to send in own carrier if preferred. We palletize and load for free. We offer several methods of payment. Please contact us for details: 219) 397-7476 ~Model No. 70B ~Serial No. BB06907(Will vary from unit to unit) ~460 Volt. 60 Hz. 7.0 Amps ~Vibrating rate: 3600 cycles/ min. with a max amplitude of 60.000 Dimensions: ... more~Overall Length: 6' 10" ~Width Out to Out: 26" ~Chute Length: 4 feet ~Chute Inside dimensions: 22" width x 3' 8" length Rate of material movement estimated at 90 lbs. per cubic feet: ~20 Tons per hour with depth on hopper of 1.4 inches ~30 Tons per hour with depth on hopper of 2.08 inches ~40 Tons per hour with depth on hopper of 3.25 inches ~50 Tons per hour with depth on hopper of 4 inches
|
|
HTC Model 1200 Hydraulic Truck Conveyor
Used HTC Model 1200 hydraulic truck conveyor. This conveyor weights about 1000 pounds and has a 12" wide belt. There are no major tears in the belt. It has a rear reversing valve to switch the direction of the belt to unload on either side. I would prefer local pickup unless the buyer sets up the shipping. Thanks.
|
|
Hytrol Model CRB Slider Bed Trash Powered Conveyor
This auction is for a 30' of Hytrol Model CRB Slider Bed Trash Powered Conveyor. It is designed for moving trash from packing operations. Specifications: 24" Overall Width. 6" sides slanted at 45 degrees. The system includes: 3-10' beds. 1 detached motor unit. This system is 6 years old and in very good condition. It has been professionally uninstalled and is packed on pallets for shipment. There are no stands with this system. FOB: Kansas City. MO. We will be happy to assist you with freight services and costs. Allow 3-4 days for shipment. We will collect sales tax for Kansas and Missouri. Long term e-Bay seller with over 1500 transactions and 100% feedback score.
|
|
Hytrol Model TH Slider Bed Trash Powered Conveyor
This auction is for a 74' if Hytrol Model TH Slider Bed Trash Powered Conveyor. It is designed for moving trash from packing operations. Specifications: 33" Overall Width. 31" Inside dimension, 12" sides, underside bed covers for safety. The system includes: 1-10' beds with motor. 4-10' beds, 1-10' bed with end rollers, 1-8' bed, 1- 6' bed with end roller This system is 6 years old and in very good condition. It has been professionally uninstalled and is packed on pallets for shipment. There are no stands with this system. FOB: Kansas City. MO. We will be happy to assist you with freight services and costs. Allow 3-4 days for shipment. We will collect sales tax for Missouri and Kansas. Long term e-Bay seller with over 1500 transactions and 100% feedback score.
|
|
Hytrol Model 138ACC Adjusting Pressure Roller Powered Conveyor
This auction is for 174' Hytrol Model 138ACC Adjustable Pressure Powered Conveyor. It is designed for accumulation and packing operations. Specifications: 24" Overall Width. 1.9" rollers on 3" centers. Fingertip snub roller adjustment, 2% min back pressure. The system includes: 2-10' beds with motors. 12-10' beds, 1-10' bed with end rollers, 1-9' beds, 1-8' bed, 1 6' bed with end roller This system is 6 years old and in very good condition. It has been professionally uninstalled and is packed on pallets for shipment. There are no stands with this system. FOB: Kansas City. MO. We will be happy to assist you with freight services and costs. Allow 3-4 days for shipment. We will collect sales tax for Kansas and Missouri. Long term e-Bay seller with over 1500 transactions and 100% feedback score.
|
|
Hytrol Model ABEZ-EZ Logic Powered Conveyor
This auction is for 168' Hytrol Model ABEZ-EZ Logic Live Roller Powered Conveyor. It is designed for accumulation without a build up of pressure. Ideal for packing operations. Specifications" 28" Overall Width. 1.9" rollers on 3" centers, 8" belt, 6 1/2" frame, 30" zones with photo eyes. The package includes: 4-10' beds with motors. 2-10' beds with motor unit and end rollers, 6-10' beds with end rollers, 2-10' beds, 1-5'6" bed with end roller(6 motor units and 9 end rollers. This system is 6 years old and in very good condition. It has been professionally uninstalled and is packed on a pallets for shipment. There are no stands with this system. FOB: Kansas City. MO. We will be happy to assist you with freight services and costs. Allow 3-4 days for shipment. We will collect sales ... moretax for Kansas And Missouri. Long term e-Bay seller with over 1500 transactions and 100% feedback score.
|
|
Hytrol Model RB, Belt Over Roller Powered Conveyor
This auction is for a 114' 6" Hytrol Model RB Belt Over Roller Powered Conveyor. It is designed to move loads. Maximum 225 lbs. for assembly, inspection and packaging operations. The conveyor is 28" over all width(OAW) 1.9" rollers on 6" centers. The system includes: 3-10' beds with motor units. 5-10' beds, 1- 13' bed with end roller, 1-3' nose over unit, 1-5'6" feeder bed with motor, 1- 4' bed with end roller and 1-9' slider bed with sprocket slaves on each end and 1 motor unit. This conveyor is 6 years old and in very good condition. It has been professionally uninstalled and is packed on a pallet for shipment. There are no stands with this system. FOB: Kansas City. MO. We will be happy to assist you with freight services and costs. Allow 3-4 days for shipment. We will collect sales ... moretax for Missouri and Kansas. Long term e-Bay seller with over 1500 transactions and 100% feedback score.
|
|
100' Hytrol Powered Accumulating Conveyor, V-Belt Model 190-ACC
This conveyor is in good condition. Recently removed from service. FOB seller location. Fernley, NV. 89408 Roller Beds and Adjustable floor stands will be strapped on pallets for shipment.
|
|
Hytrol Belt Conveyor Approx L=27' X W=24" Model TA
Hytrol Belt Conveyor Approx L=27' X W=24" Model TA Manufacturer: Hytrol Model: Belt Conveyor Approx L=27' X W=24" Part Number: Model TA Cosmetic Condition: Good. See Pictures) Functional Condition: From working environment Missing: No cables. Software or manuals Additional Information: This unit has three sections with the following approximate lengths: 5' 6"10' 6"11' Overall about 27' v Please Feel free to contact us through Ebay messaging. WARRANTY INFORMATION We offer a 14-day Dead-on-Arrival(DOA) guarantee for all items listed as USED. Any items that are specifically listed for parts or not working are sold as is. And are not subject to this warranty. There is NO WARRANTY and therefore no return on items listed As-Is. For parts or not working, Untested, Not working, or Non-functional. It is ... morethe buyers responsibility to be aware of what they are purchasing. Please read the entire listing carefully. If you have any questions concerning the item. Please ask BEFORE making purchase. We will be happy to take additional pictures or give more specifics on items in question. The DOA warranty covers only physical hardware as well as electronic parts. Any registration. Software, license, firmware, drivers, security code, update, patch, initialization routine or anything not directly related to hardware will be up to the buyer to configure, update or install. Buyers should make sure purchased item will be compatible with their equipment. If the product arrives damaged or fails to perform as indicated in the contract details. Contact us within fourteen(14) days from date of purchase for instructions on returning item. If you have any questions concerning the item. Please ask BEFORE making purchase. We will be happy to take additional pictures or give more specifics on items in question. We will offer replacement if we have one available. Or refund if no replacement is available. RETURN POLICY If any product needs to be returned to us. Please contact us within 14 days of purchas
|
|
Tuffman "Mini" Model 3-Man (IM) Sorting System w/ Infeed Conveyor w/ Magnetic
Tuffman"Mini" Model 3-Man(IM) Sorting System with Infeed Conveyor with Magnetic Pulley Tuffman"Mini" Model 3-Man(IM) Sorting System with Infeed Conveyor with Magnetic Pulley- 20' long x 32" wide picking table with 3- 16" x 60" chutes with 52" clearance for gaylords or dumpsters. Powered by a 2 hp 3-phase electric motor. Comes equipped with 20' x 32" infeed conveyor with magnetic head pulley separator with a ferrous separator chute. Excellent for plastics. Paper and other light recyclables. Listing Number: WWEWSS04NB. Industrial information about our Tuffman"Mini" Model 3-Man(IM) Sorting System with Infeed Conveyor with Magnetic Pulley: Materials that can be processed: mixed paper. Cardboard, municipal solid waste, mixed plastics(ground) construction, demolition, electronic scrap(e-waste) ... moreProcess: sorting materials or picking materials. Industrial use: Sorting stations are primarily used in material recovery facilities(MRFs) to sort municipal solid waste. These systems help recyclers to maximize the value of recovered materials such as plastic. Paper and aluminum. Sorting stations are also excellent for recovering construction and demolition waste, electronic(e-waste) and industrial waste.
|
|
USED STACKER TABLE CONVEYOR MODEL 22 WITH COUNTERS AND CONTROLS
This item up for auction is a used Stacker conveyor table with 2 pieces that connect together to make one long conveyor. This item came from an auction of a closed down business. This item was used to convey small parts from one table to another and then stack them. Thats all I know about the use of it. It is a model 22. I am not sure of the brand. I plugged the items in and both of the conveyors work. The control panel also works and controls the conveyor speed and flutter. The counters came on and the digital readouts lit up. That is a far as I tested the item. The units plug into a standard 110 outlet. The 2 pieces can connect together to make 1 long conveyor or be used as two smaller conveyors. Measurements are on conveyor 1 55"L x 19.5" W Conveyor 2 54" L x 14.5"W. Normal 0 My Prices are not set in stone. If you do ... morenot like my price just make me an offer. You never know I might just accept it. Ships to US. Canada and Mexico via freight. This can also be picked up locally. I will allow a 14 day return policy with a full refund for the item. Shipping cost will not be refunded and return costs are the buyers responsibility. As you can see from my feedback I go out of my way to make my customers happy and pride myself on that. If you have any questions at all please don't hesitate to ask. If you would like a freight quote please email me your zip code. Let me know if it will be a commercial or residential delivery, and if you need a truck with a lift gate. I will prepare your item for shipping including palletizing. Strapping it down, shrink-wrapping, and loading it on the carriers trailer for no additional charge. You might find them lower priced than mine but they are not going to give you the customer service that i do. I care that my customers are happy. I will make your transaction as easy as it can get from the time you buy it until the time you get it and decide you are happy with it. Just check my feedback. you will not be sorry. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fu
|
|
Chantland Swivel Conveyor Model 3900-016
For your consideration. Chantland Swivel Conveyor Model 3900-016 s/n 33787 Order D16087. Job# N-16870 Units sell for more than $25.000 each new. These units were used for a six week test to determine if a client would use the Chantland units to stack bags on pallets or go with a fully automated pallet/Gaylord Box stacking system. They opted for the automated system. The result, two, like new units available for your facility! All items are for sale locally and are subject to prior sale. We will assist in loading one or both of these units on truck. Please contact us with questions!
|
|
Automated Conveyor Cat No. 110458-00 Model No. C6T1TFC10E 1725 RPM CG1624
Automated Conveyor Cat No. 110458-00 Model No. C6T1TFC10E 1725 RPM Untested By Us Encl. TEFc Date Code K01B 60 Hz 208/230-460 Volts 1/2 Hp Duty Cont. FLA-2 FR C56C Ser Fact 1.15 SFA 2.2 40C Max Amb Code K Phase 3 Nema Nom EFF 74 Not thermally Protected Customer pick ups are welcomed. No handling fee charged if picked up by buyer. And we will load your item for you. Items are located at the bright red building located three miles north of Adams-Friendship, Wisconsin, just north of the Hwy 21 and Hwy 13 intersection. For other shipping options or any questions, call Dave Gibson at: 1 608 403 1133 or email Dave your question(s) with Ask a question under Seller info. Store Information: CG1624
|
|
HYTROL MODEL 190-ABEZ CONVEYOR INSTALLATION AND MAINTENANCE MANUAL
HYTROL MODEL190-ABEZ CONVEYOR INSTALLATION AND MAINTENANCE MANUAL STOCK#36052
|
|
HYTROL MODEL TA CONVEYOR INSTALLATION AND MAINTENANCE MANUAL
HYTROL MODEL TA CONVEYOR INSTALLATION AND MAINTENANCE MANUAL STOCK#36051
|
|
CONVEYOR COMPONENT CO. MODEL TA-1 GENERAL PURPOSE 1SP/DT SWITCH USED
CONVEYOR COMPONENT CO. MODEL TA-1 GENERAL PURPOSE 1SP/DT SWITCH*USED* RED ROLLER ASSEMBLY(AS SEEN IN PHOTO) WILL BE DETACHED FOR SHIPPING PURPOSES ANY QUESTIONS PLEASE CALL MAURIE AT 609 265 1818 SHELF 16 The Model TA is a belt mis-alignment control that provides an indication when a conveyor belt has drifted off to a dangerous misalignment condition. The output contacts of the Model TA can control up to two separate circuits. One for machinery shutdown and one for an alarm. The housing is cast aluminum. With optional epoxy or polyester powder coatings available. These coatings will provide protection against corrosion that is equal or greater than cast iron. The roller is a highly visible red epoxy coated roller of 1-1/4" diameter with nylon bushings. The unit is mounted on the conveyor by drilling(3) 13/32" diameter holes. General ... morepurpose(weatherproof) and explosion proof units have(1) 3/4" NPT conduit opening. The standard units have dry. Unpowered SP/DT microswitch(es) rated for 20A@ 120 VAC, 240VAC, and 480 VAC; 1/2 amp at 125 VDC and 1/4 amp at 250 VDC. The roller arm can move up to 90 degrees in either direction. Roller is spring loaded to automatically reset itself. Manual reset available as an option. The operating temperature range is-40ºF(40ºC) to 150ºF(65ºC) The general purpose units are rated NEMA 4/4X weatherproof and corrosion-resistant. And NEMA 5 dust-tight. Explosionproof units are rated NEMA 7/9 for dust ignitionproof and vapor explosion proof. The dual-rated"D" units are rated NEMA 4 weatherproof and NEMA 9 dust ignition proof. The general purpose controls are IP65 compliant. Most models are UL listed and CSA certified.
|
|
EMI Plastics Conveyor 58" Long x 24" Wide Model: RM-24-5-20
EMI Plastics Conveyor Model: RM-24-5-20 Serial: M-9388 Variable Speed Voltage- 115. Amps 6.0 Conveyor- 58" Long x 24" Wide Must have cleared funds prior to shipping. The picture is of the actual item. No manuals or accessories are included unless it is in the picture or stated in the description. If you have any questions please feel free to ask and we will get back to you as soon as possible. Emails will be answered as promptly as possible. We are Open 7-3:30pm EST. Give us a call at 812-752-9094 and ask for Bryan Shipping is local pickup. I can get you approx. weight and dimensions if you would like to get shipping quotes. Check us out on the web at
|
|
Milacron Flat Belt Conveyor Model: ADF-36-10-20 10' Flat belt conveyor
Milacron Flat Belt Conveyor 10' Long. 37" Wide 460 Volt 3 PH 34" height to the top of belt Must have cleared funds prior to shipping. The picture is of the actual item. No manuals or accessories are included unless it is in the picture or stated in the description. If you have any questions please feel free to ask and we will get back to you as soon as possible. Emails will be answered as promptly as possible. We are Open 7-3:30pm EST. Give us a call at 812-752-9094 and ask for Bryan Shipping is local pickup. I can get you approx. weight and dimenstions if you would like to get shipping quotes. Check us out on the web at
|
|
Belt Conveyor 36" Wide x 35' long Hytrol model TL white mar resistant belt
Used Hytrol belt conveyor Model TL 36" wide belt x 35' long with white polymate mar free belt. 1 HP. 230-460-3-60 motor with gear box and belt drive rated for 5 FPM. belt speed. Floor supports with 6" dia. caster wheels included. We have 2 available. Listing is for one unit. We can assist in shipping.
|
|
Hytrol Model 138ACC Powered Conveyor, 5'L X 18"W, Used
YOU ARE BIDDING ON ONE: Hytrol Model 138ACC Powered Conveyor. 5'L X 18"W, Used. ANY QUESTIONS. CALLL LIZ@ 770-536-0220 DIXIELAND EQUIPMENT SALES. 3887 Athens Hwy. Talmo, Ga. 30575 BUYER IS RESPONSIBLE FOR SHIPPING, BUYER MUST ARRANGE FOR PICK-UP/SHIPPING WITH CARRIER OF THEIR CHOICE. CARRIER PICK UP MONDAY-THURSDAY 8-12NOON& 1-4PM. ONLY. Be sure to add me to your favorites list! Happy Bidding!
|
|
CAP-L Stainless Incline Conveyor Model 96
CAP-L Incline Conveyor Model# 96 Hopper 38" X 25" X 27" Cone Bottom Conveyor Length 10" Belt 6" Paddle 2-3/4" Daton Gear Motor Model 6K329B HP 1/6 RPM 40 Ratio 42.7:1 Torque 225 in/lb Volts 115 Hertz 60 Phase 1 Surplus Used Small Items Will Ship Fedex. UPS, Or USPS. Shipments Outside The U.S. Must Be Arranged By Buyer. SKU MHW6111001324 Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-146b9789077-0x10c-
|
|
Rapistan Belt Conveyor - Model AP378-1162L - 30" x 108" Belt - 115 volt
RAPISTAN- Model AP378-1162L- 30" x 108" Belt Conveyor- I have up for auction a nice clean Rapistan 115 volt single phase belt conveyor with a custom built adjustable leg system. This conveyor was set up for adjustable incline use on rubber tires for towing at low speeds(under 25 mph) around my property for loading my firewood into pallet storage boxes. It has almost new tires on it that I put on one year ago. And it is always stored inside when not in use. I only used this conveyor once a year for about 8 to 10 days when processing my annual firewood supply. It has a standard 2" square receiver type hitch on it so a variety of inserts can be used to tow it with. I built and installed a custom"flip up" style aluminum chute at the discharge end to aid in loading containers and it can be flipped up to get it out of the ... moreway when setting pallet boxes in place. The conveyor can be adjusted in three height increments from 52" in the low position to 58" in the highest position. top of belt) In the highest position there is 48" clear on the underside of the belt. You can add more height settings by simply drilling new holes in the support legs to meet your needs. The support legs can be raised to lower the overall height of the conveyor for more stable towing while transporting on rougher ground. The belt tracks very well and has not needed adjustment since I first set it up about five years ago. All bearings are smooth and quiet and everything operates as it should. The belt does have some minor nicks in it from chunks of wood being tossed onto it, but nothing structural or that would cause the belt to fail in any way. The conveyor is powered by a 3/4 H.P. 115 volt single phase 1725 rpm totally enclosed motor which can be wired 115/ 230 volt and there is a on/ off switch located right at the motor. If I can answer any other questions please ask through ebay and I will get back to you as soon as I can. PICK UP or SHIPPING will be the responsibility of the purchaser. I Will Not get i
|
|
Hytrol Conveyor Company Model TA
You are bidding on a Hytrol Conveyor Company Model TA conveyor. This item is used and for pick up only and payment is due at pick up. We will not ship.
|
|
Lahr Model SHL 8 chip conveyor 115/230 V 1Phase
419-445-1111 SKU: DIS2286 Lahr Model SHL 8 chip conveyor 115/230 V 1Phase. In Stock: 1 Brand: Lahr Condition: Used Model: SHL 8 Country of Manufacture: United States Manufacturer Part Number: SHL 8 Amperage Rating: 8.6/4.3 Voltage Rating: 115/230 V Manufacturer: Lahr Horsepower(HP) 1/2 Lahr Model SHL 8 Chip conveyor Motor: 115/230 V 1 Phase 1/2 HP 1725 RPM Conveyor Overall dimensions:aprox) 71" x 13" x 65" Conveyor Belt is 8-1/2" wide Has forward and reverse travel Tested and working At Dave's Industrial Surplus we strive to make every transaction as smooth as possible. This begins before items are listed. We go through every item with a fine tooth comb to make sure all items are both clean. And complete. We have over 10 years combined experience in Industrial Surplus. We know what we sell so feel assured that you ... moreare going to be dealt with in a professional manor from the beginning to the end of your transaction with us. Don't hesitate to contact us with any questions you may have. We love to hear from you. Payment must be received within 4 days of items end. If more time is required please contact us PRIOR to your purchase of any of our items. We prefer Paypal. Please contact us for other payment types accepted. We will not ship any items paid for with a echeck until the check clears our bank. This could take as many as 10 days. We ship via LTL. USPS, or UPS Ground. If you require a quicker shipping method please contact us for a price quote. When an item is marked Freight please contact us for a shipping quote. We will need your zip code and whether the shipment is delivering to a Residential or Commercial address. We will do everything possible to aid in arranging for delivery or LTL shipping. If you need a liftgate or not, a telephone number, and what day and time the delivery can be made. Please contact us for all International Shipments. For International Freight Shipments we can ship to the US Borders as long as you can provide Transportation from there to your location and hav
|
|
RAPISTAN Power Conveyor with 186' of Conveyor Sections, Model 601-15-5-2418-3/4
RAPISTAN Power Conveyor with 186’ of Conveyor Sections-Reduced by $1.000! Fantastic price! 18” wide belt 24” overall conveyor unit width Mobile on heavy duty castors. MFG date 1-72 SR# 2-217455 Belt Length 34 feet 9 inches(417” MODEL 601-15-5-2418-3/4 Conveyor sections: All straight sections Skate-wheel 18” overall width, 16” roller width 18– 10’ sections 1– 6’ section 3– Adjustable leg assembly units. Functional height approximately 26” to 41” Dayton Motor– 110v system
|
|
conveyor system--Roach model
full working system with stands has extra rollers.
|
|
Porter Belt Conveyor Model 800-C
36" x 11' belt 79-543, Adjustable Legs, Sorry we do not accept PayPal- Checks Only Check us out at classicmachineworks.com
|
|
Doucet Belt Conveyor Model# CC-52-8 SN# 92-02-270
52" x 90" Belt w/ Drive Power Up/Down, 33" 42" Height, 1/2hp, 1740rpm, 208/240/480vt, 3ph, 5' x 9' L,
|
|
#O19 Dorner 2200 Series model 202M03-0250200A010102 Conveyor Band
WE BUY OBSOLETE AND EXCESS INVENTORY! This is a used Dorner 2200 Conveyor Band Series model. 202M06-0250200A010102. WDH) 30"x9"x2" this product may have some cosmetic wear. Item has been taken off of a working environment, but is in great condition. Need to contact us? We are open 8-4:30 PST Mon-Fri. Our phone number is 858-658-9207. Buyer to pay shipping and handling. unless listed above as local pick up only) We DO consolidate shipping on multiple item purchases! Please see shipping calculator below to calculate your shipping costs. CA. buyers. Please remember to include 8% tax with payment! The only way we will ship Internationally is through eBay's global shipping method. Where eBay gives us a U.S. address to send it to and they take care of the rest of the shipping internationally. If that option is available, you ... moreshould be able to see it on the shipping calculator. We would not be able to consolidate shipping when using the global shipping method. Please Note: UPS does not ship to APO or PO Box addresses. So we will need a physical shipping address. Items are to be paid for within 5 days of winning bid. If sold for local pick up. Must be picked up also within the 5 days of winning bid. We can ship 3rd party billing to your UPS account number also! Just let us know your UPS account number after winning the bid! Email us for s&h quote if there is no shipping calculator. Please make sure to view our page before bidding. We accept paypal payments. See our terms of sale page for additional payment options. TERMS OF SALE 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-149789610e5-0x10d-
|
|
USED UNI SLAT TOP TRAVEL 6FT CONVEYOR BELT MODEL LF 882 & 7 1/2 WIDTH
Here for your consideration is a USED UNI SLAT TOP TRAVEL 6FT CONVEYOR BELT MODEL LF 882& 7 1/2 WIDTH. Check out the pictures for yourself.I ship my orders fast within 1 business day and I've sold other types of conveyer belts recently so bid with confidence. Please ask any questions prior to purchase and I'll be more then happy to help. Thanks for stopping by. My shipping cost are calculated from East to West Coast so anyone closure will receive shipping refund to help save you money. E-6
|
|
USED SLAT TOP 7FT CONVEYOR BELT MODEL PRR-7 1/2" WIDTH NICE CONDITION
Here for your consideration is a USED SLAT TOP 7FT CONVEYOR BELT MODEL PRR-7 1/2" NICE CONDITION. Check out the pictures for yourself.I ship my orders fast within 1 business day and I've sold other types of conveyer belts recently so bid with confidence. Please ask any questions prior to purchase and I'll be more then happy to help. Thanks for stopping by. My shipping cost are calculated from East to West Coast so anyone closure will receive shipping refund to help save you money. E-6
|
|
Hytrol Conveyor Model FJ 22' with 18" wide belt on a 24"
I have a used 20' long model FJ Hytrol Electric 18" wide Belt Conveyor was sloped to 2nd floor previously. 2 gear(forward and backwards remote) electric motor. Please contact me for questions. As-Is. This has been stored outside for a month or two, Motor and electronics are wrapped to avoid water damage. Worked fine last time used Delivery could be arranged for extra fee Located in Fort Myers. FL
|
|
Chain Driven Live Roller Conveyor by ROACH, Model 192CDLR, Mfr. 2005, Used
YOU ARE BIDDING ON ONE: Chain Driven Live Roller Conveyor by ROACH. Model 192CDLR, Mfr. 2005, Used. Heavy duty for product flow weighing up to 200 lbs. each per product weight. Specifications: TREAD ROLLERS: 1.9” dia. x 12 ga. steel. Model 192S with sprockets. CHAIN DRIVE: Roll-to-roll no. 40 roller chain. CENTER DRIVE: Reversible drive either side mounted or underside mounted(specify) Main drive roller is supported by precision. Heavy duty, lubricated, ball bearing units. CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor. ROLLER CENTERS: 4” 6” 8” or 12” centers available. SPEED: 45 FPM. Constant. BEARINGS: Removable type. Zinc-plated, grease packed, labyrinth sealed. BED: 5-1/2” x 1-1/2” x 10 ga. and 3-1/2” x 1-1/2” x 10 ga. Formed steel channel frame. MOTOR DRIVE: 1/3 HP. 230/460/3, 60 cycle, ODP ... moreright angle gear motor. ELECTRICAL CONTROLS: Optional. THIS IS TAKEN DIRECTLY FROM THE MFR'S. SALES INVOICE: SERIAL#357359-1. Mo del 192CDLR 8'Long/34"BF/6"RC. 31" Conveying Surface, CD-192CDLR-3/4 hp-34" 60 FPM/ Underneath/ Right Hand, Right Hand Underneath Drive, Speed: 60 fpm, MC- TEFC Brake- 3/4 hp- 230V/460V/3- 60 FPM- Right Hand, 2 SM-4-34" Medium Duty Supports, Infeed TOR is 24" Discharge TOR is 24" THRU THE SIDE OPPOSITE THE DRIVE AT TIME OF SHIPMENT THE PRODUCT LOAD ON THIS UNIT WILL BE 22" TO 26" WIDE X 57" OR 72" LONG AND UP TO 200# EACH MAXIMUM. MARK UNIT M8. DIXIELAND EQUIPMENT SALES. 3887 Athens Hwy. Talmo, Ga. 30575 BUYER IS RESPONSIBLE FOR SHIPPING AND FOR ANY ITEMS HELD BY CUSTOMS. BUYER MUST ARRANGE FOR PICK-UP/SHIPPING WITH CARRIER OF THEIR CHOICE. CARRIER PICK UP MONDAY-FRIDAY 8-12NOON& 1-4PM. Be sure to add me to your favorites list! Happy Bidding! YOUR INVOICE WILL SHOW AS $0.00 FOR SHIPPING DUE TO EBAY FUNCTIONALITY- IT IS NOT‘FREE SHIPPING’ SHIPPING SPECS. I.e. Weight and Dimensions WILL BE PROVIDED TO YOU TO OBTAIN YOUR CARRIER TO PICK-UP ITEM. IF YOU NEED HELP. PLEASE CONTACT US FOR ASS
|
|
Used Rapistan model# A6602-28034 Conveyor motor
This is a used Rapistan 3/4 H.P. conveyor motor. Model# A6602-28034. It is 13 1/2" wide, 57 1/4" long, 14" tall. No returns. Buyer pays for shipping and insurance. Delivery can be arranged for Illinois and surrounding states. We accept all forms of payment except for PayPal and American Express. Please contact seller for payment instructions. Or if you would like to make an offer on our entire Rapistan listings as a package. For quotes please call John McCarthy at Freight Quote. His number is 1-800-323-5441 ext. 6121. This item will be on a pallet and will weigh approximately 115 pounds. With measurements of 65x22x22. For all appliances and oversized items there will be an additional fee for packing and handling to prepare for the freight shipment.
|
|
Dorner Conveyor 4100 Series 12" wide belt 72" long Slug-o-Matic Model 1206
Dorner Conveyor 4100 Series 12" wide belt 72" long Slug-o-Matic Model 1206. The conveyor was taken off a working machine and functions great, cosmetically it needs a cleaning but has a lot of life left in it. This is a local pick up only because of the size and weight of the conveyor. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
AUTOMATION DEVICES MODEL 10 VIBRATORY PARTS ELEVATOR CONVEYOR + SORTER
Call Us Today! 626.330.4647| AUTOMATION DEVICES MODEL 10 VIBRATORY PARTS ELEVATOR CONVEYOR + SORTER, AUTOMATION DEVICES VIBRATORY PARTS ELEVATOR MODEL 10 120 VOLTS 60 HZ BOWL DIAMETER: 10-3/4" BOWL DEPTH: 3-3/4" INCLUDES VIBRATRY FEEDER CONTROLLER MODEL 6800.1 BOWL MEASURES: 13" x 13" x 20" SORTER MEASURES: 15" x 9" x 15" WEIGHT: 161 LBS COMES AS SHOWN IN PHOTOS IN GREAT WORKING CONDITION Copyright 2014 1 Machinery Sales.com | All Rights Reserved, DESCRIPTIONS Please read descriptions carefully. We list any features, specifications and details we know and/or research. When possible we test the basic features If you don’t see the information you need or notice any discrepancies; Contact Us! We are here to answer all your questions regarding our eBay Listings and our eBay Store. Don't assume items ... morecome with any accessories not shown in pictures. All items come as shown in pictures. PAYMENTS We accept Visa. MasterCard and Discover via PayPal. Payments are expected within 3 days after the close of the auction. An eBay Non-Paying Bidder Notification will be filed if payment has not been received. After 10 business days of non-payment item will be relisted and no payment from previous transaction will be accepted. Sales Tax is calculated on the final auction cost plus shipping charges and must be paid prior to shipment. STORAGE We offer storage services from small items to full containers. We also offer container loading. Contact us for prices. For buyers bidding on. Or buying multiple items, we will hold them for up to 7 days at no charge, after 7 days fees may apply. Contact us when you are planning to bid on multiple items across multiple days. We offer two kinds of storage fees: Inside: $ 2.50 per sq. foot, Outside: $ 2.00 per sq. foot, FEEDBACK Positive feedback will be left after payment has been received. If after receiving your item. You have concerns, questions or the item is not what you expected please Contact Us! We want to make your transaction a pleasant experie
|
|
NICE! AUTOMATION DEVICES MODEL 10 VIBRATORY PARTS ELEVATOR CONVEYOR + SORTER
Call Us Today! 626.330.4647| NICE! AUTOMATION DEVICES MODEL 10 VIBRATORY PARTS ELEVATOR CONVEYOR + SORTER, AUTOMATION DEVICES VIBRATORY PARTS ELEVATOR MODEL 10 120 VOLTS 60 HZ BOWL DIAMETER: 10-3/4" BOWL DEPTH: 3-3/4" INCLUDES VIBRATRY FEEDER CONTROLLER MODEL 6800.1 BOWL MEASURES: 13" x 13" x 20" SORTER MEASURES: 15" x 9" x 15" WEIGHT: 161 LBS COMES AS SHOWN IN PHOTOS IN GREAT WORKING CONDITION Copyright 2014 1 Machinery Sales.com | All Rights Reserved, DESCRIPTIONS Please read descriptions carefully. We list any features, specifications and details we know and/or research. When possible we test the basic features If you don’t see the information you need or notice any discrepancies; Contact Us! We are here to answer all your questions regarding our eBay Listings and our eBay Store. Don't assume ... moreitems come with any accessories not shown in pictures. All items come as shown in pictures. PAYMENTS We accept Visa. MasterCard and Discover via PayPal. Payments are expected within 3 days after the close of the auction. An eBay Non-Paying Bidder Notification will be filed if payment has not been received. After 10 business days of non-payment item will be relisted and no payment from previous transaction will be accepted. Sales Tax is calculated on the final auction cost plus shipping charges and must be paid prior to shipment. STORAGE We offer storage services from small items to full containers. We also offer container loading. Contact us for prices. For buyers bidding on. Or buying multiple items, we will hold them for up to 7 days at no charge, after 7 days fees may apply. Contact us when you are planning to bid on multiple items across multiple days. We offer two kinds of storage fees: Inside: $ 2.50 per sq. foot, Outside: $ 2.00 per sq. foot, FEEDBACK Positive feedback will be left after payment has been received. If after receiving your item. You have concerns, questions or the item is not what you expected please Contact Us! We want to make your transaction a pleasant e
|
|
EMI Conveyor model 4-MG8R plastic handling
A working conveyor taken out of a working shop. In very good condition. 120 volts 1/3 hp 6amp.motor,20FPM. Belt is 9" wide x 4' long, 16" wide total with attached slave driven finger separator. Heavy 12 g. steel frame. Standard 15' cord. Urethane wheels. In excellent working condition.
|
|
SIEGLING MODEL No. ESM5, CONVEYOR BELT WEDGE SPLICE GRINDING MACHINE
SIEGLING MODEL No. ESM5. FLAT BELT WEDGE SPLICE GRINDER SIEGLING No. ESM5 GRINDER. FOR PREPARING SIEGLING FLAT CONVEYOR BELT FOR WEDGE SHAPED HEAT SPLICE. DRUM GRINDER WITH ADHESIVE BACKED GRINDING BELT. 5/16" DIAMETER DRUM DRIVE PIN WITH FLEX COUPLING. 6-1/4" DRUM LENGTH. GRAY HAMMERTONE FINISH. 1985 DATE ON TAG. AUCTION FOR GRINDER ONLY AS PICTURED. NO EXTRA SANDING BELTS. DRIVE MOTOR, OWNER'S MANUAL OR PACKAGING. BELT SPLICE GRINDER USED IN GOOD WORKING ORDER- GOOD BELT- SCRATCHES. SCRAPES, SMUDGES, WORN FINISH- AGE UNKNOWN- NO INTERNATIONAL SHIPPING, SHIPPING TO THE LOWER 48 STATES ONLY BY UPS GROUND SERVICE- SOLD AS IS
|
|
WHITE INCLINE CONVEYOR MOSIUR MACHINERY MODEL: 49997
WHITE INCLINE CONVEYOR MOSIUR MACHINERY MODEL: 49997 FOCUS 1 VARIABLE SPEED CONTROL 1. GREAT CONVEYOR WITH A VARIABLE SPEED CONTROLLER. 2. BRAND NEW BELT. 3. 110 V 4. ADJUSTABLE HEIGHTS 5. MAX HEIGHT IS ABOUT 10 FEET. 6. MINIMUM HEIGHT IS ABOUT 6 FEET. 7. SOLD AS IS!
|
|
Dorner 4100 Series Conveyor 6" Wide 4 ft. Long Model 4100-0604-01/02 No Drive
Used- Good Condition- Dorner 4100 Series Conveyor 6" Wide 4 ft. Long. Model 4100-0604-01/02. No Drive. I have multiple units. The one in the photo may not be the one you get. They are in the same condition. For more info see: http:www.dornerconveyors.com/Products/4100-Series.aspx My Stock#5347 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Chip conveyor Mayfan Model MT 10
Mayfan Model MT- 10 This dr ag conveyors(also called scraper conveyors) are well suited for applications with dry cast iron or wet cast iron or aluminum applications. The motor is not included. However, the p roduct manual is. This unit is in good shape and will be sold where is. As is.
|
|
Hoppmann Inclined Elevated Feeder Cleated Conveyor w/ Hopper Model EP Series 8
Hoppmann Corp Elevated Prefeeder Feeder Conveyor w/ Hopper Model EP Series 8 THIS CONVEYOR IS USED. BUT IN FAIR CONDITION. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS. EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR FURTHER DESCRIPTION AND OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: APPROX. PRODUCT DIMENSIONS: LENGTH: 105" WIDTH: 42" HEIGHT: 74" SHIPPING WEIGHT: 390 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP VIA FREIGHT GROUND TO ALL UNITED STATES.CANADA, AND MEXICO. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. INTERNATIONAL BUYERS PLEASE CONTACT US FOR A QUOTE. THE BUYER IS RESPONSIBLE ... moreFOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREF
|
|
6" Wide Belt for Dorner 4100 Series Conveyor 4 ft. Long Model 4100-0604-01/02
Used- Good Condition- 6" Wide Flat Belt for Dorner 4100 Series Conveyor 4 ft. Long Model 4100-0604-01/02 Stock#5352 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Eriez vibrator Model 20A for conveyor, gold machine prospectors dry washer
Here is a small heavy duty industrial vibrator unit. Suitable for light vibrating conveyor service. Or for prospectors gear such as gold machines. Vibrating sluces, drywashers, and the like. Model 20A Style 26 115 volts 60 cycles.25 Works as designed when power is applied. These cost several hundred $$ from the factory. Very heavy. Packed weight near 30 pounds so shipping cost will be fairly high. I have several of these available. So I will be listing more as I sell some. Thanks for your interest and please look at my other items!
|
|
|