Heavy Duty set of 4 Casters NON-SWIVEL rubber wheels 2 1/2" marked Japan
I am selling from a storage box lot 4 casters marked on the wheels Japan. I have 2 sets of 4 available. The wheels measure close to 2 1/2" in diameter. The casters do NOT swivel. The mounting plate needs 4 screws and it measures 2 3/4" x 1 3/4" One wheel may of been used a few times for something as it is dirty and the other appears unused. Thank you and I will combine shipping, if the Regional A box is cheaper shipping I will adjust invoice
|
|
Lot of 5 BASSICK 2 1/2 Inch Swivel Casters Wheels Industrial Parts Marked 945
LOT OF 5 BASSICK 2 1/2 INCH SWIVEL CASTER WHEELS This is a lot of 5 casters/wheels as shown in the pics.They are made by BASSICK in the USA and are all in good used condition with very little wear but do SHOW DIRT on the hard rubber wheels.All of them swivel freely and they are marked 945 on the metal sides of the frames of the wheels.The wheels are 2 1/2 inches in diameter and 1 3/4 inches wide.The metal base plate is marked 594 and measures 3 3/4 inches X 2 3/4 inches. The holes are 1 3/4 inches apart center to center on the short side and 3 inches apart center to center on the long side.They are being sold AS IS and AS SEEN in the pics and AS DESCRIBED so PLEASE look at the pics to verify the conditions described. IMPORTANT*PLEASE continue to read below.Thanks I always try to describe the item with accurate measurements.PLEASE LOOK AT ... moreTHE PICTURES THAT ARE POSTED WITH EACH ITEM.THEY ARE PICTURES OF THE ACTUAL ITEM THAT YOU ARE BIDDING ON. If you have any questions about the item please e-mail me before bidding and I will do my best to answer you as honestly and as quickly as possible.I AM NOT an expert on any item that I sell.If you can tell me something about the item by looking at the pics.I always appreciate your input.I will never KNOWINGLY sell anything that is not truthfully and honestly described and pictured.If you get the item and it is not as described or pictured,let me know WITHIN FOURTEEN(14) DAYS and I will refund your money as soon as I receive the returned item, INCLUDING SHIPPING CHARGES.You MUST e-mail me to let me know that you intend to return the item and I will mail you a RETURN SHIPPING LABEL. FEEDBACK is important to everyone on E-BAY whether you are a seller or a buyer.I will always give you positive feedback within 5 days of receiving your payment and would hope that you leave me POSITIVE feedback after receiving your item.If there is an issue that would keep you from leaving me positive feedback.Please CONTACT ME FIRST so that we can resolve the issue.Every issue can be reso
|
|
2" Darnell-Rose Brand Double Wheel Casters 160 LB Capacity Part No: 40-13-PDN
Specially designed 2" neoprene wheels reduce expensive damage by absorbing shock on both carpeted and non-carpeted surfaces. Slightly used and ready to do your bidding. Weight capacity per unit: 160 Pounds. So put 4 together and the weight limit is 640 lbs. FOUR-SIDED. DOUBLE BALL RACEWAY. Hardened steel ball bearings touch upper and lower swivel raceway“on all four sides. This protects the pin from shock loading for frees wiveling under heavy loads. HEAT-TREATED MOVING PARTS. All moving parts are hardened to a precise molecular depth and Rockwell hardness. This extends caster life under rugged conditions and shock loads. RACEWAY DUST CAP. Dust cap protects the raceway from contamination by dust. Dirt, moisture, andother environmental debris. These are usually not available on most competitive brands. LOW OVERALL HEIGHT. Heavy pianos ... moreare supported by two wheels that roll independently to assure easy maneuverability on any floor surface. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-145835c626d-0x10e-
|
|
Lot of (4) Bassick SW J 5 2 Swivel 2 Fixed Top Plate Casters, 4.5" Poly Wheels
Used in Good Condition W/ Grease Ports Lot of(4) Bassick SW J 5 2 Swivel Top Plate Casters. 4.5" Poly Wheels 2 Fixed Email with questions
|
|
3000 LB Rigid Casters, quantity 2
Rigid Casters. Blue, 3000 lb capacity, RWM, 6" x 3" Cast Iron Wheel, Qty: 2 75 Series. Kingpinless. Includes Hardware.
|
|
Brass Hooded Ball Stem Casters 2" lot of 4
new/old stock.they have been sitting in a warehouse there dirty one has very small rust pits.
|
|
Lot 2 Vintage 4" Bassick 1 W/ Brake Locking Stem Heavy duty Casters
Up for Auction Today. Up for your bidding consideration on a no reserve auction is this, Lot 2 Vintage 4" Bassick& 1 with Brake Locking Stem Heavy duty Casters Locking caster stem is Approx 3 1/2" Long x 6/8" Wide-Wheel is approx 4" Wheel without brake Locking caster stem is Approx 2" Long x 6/8" Wide- Wheel is approx 4" EXCELLENT VINTAGE CONDITION Condition: GREAT Vintage Condition. No Damage,No Tears,No Rips,No Stains,No Breaks,No Foul odors,Rips ect.PLEASE SEE PICS! No White Spots or Fading it is my camera unless otherwise stated*PLEASE READ* I very much want you to be happy With your purchase If for ANY reason you are Not happy with your purchase Please return for a refund BUYER pays return shipping! BUYER MUST RETURN ITEM FOR REFUND* If Item is breakable& Arrives Damaged it may be insured Please ... morecontact Me) When we buy something at ANY Store we must return it For Refund.We cant get our money For gas,Wear& Tear on Car or our Ti me) I do my VERY BEST to list all items EXACTLY As they are Items are DOUBLE Checked by second person and ANY Imperfections Noted And On VIDEO! FIRST: Payment is Due within 7 days of the auction. If you are waiting for another auction to end. Please let me know. If there is some reason why you can't pay within the 7 days, please let me know I am easy and will give you the Time you need and It is NO Problem at all! SECOND: I will leave feedback after transaction has been completed and buyer has left feedback. THIRD: I try to list all items accurately and if I see a flaw in an item or imperfection it will be noted. In many cases. Buyers have stated that the item was better than described! I am human and once in a great while I may miss something. I am an honest seller and have been a buyer and a seller on Ebay for many years.EXAMPLE) If I am 1/2" off on the length of a Blouse I am NOT Going to Pay for Return Shipping or Allow you to keep Item Without paying for it. I do all my own pictures.Listing and Shipping of Items So I KNOW MY
|
|
SET OF 4 NULLING HEAVY DUTY CASTERS 5" WHEELS 2-SWIVEL+2-FIXED
SET OF 4 NULLING HEAVY DUTY CASTERS 5" WHEELS 2-SWIVEL+2-FIXED GUARANTEED TO WORK OR YOUR MONEY BACK! UP FOR SALE IS A SET OF 4 NULLING HEAVY DUTY NULLING CASTERS 5" WHEELS MOUNT PLATE IS 3.75X4.75" PLEASE NOTE UNITS ARE USED AND HAVE WEAR- SEE PICTURES FOR MORE DETAIL. PLEASE VIEW THE PICTURES BELOW TO SEE THE ACTUAL ITEM/S YOU ARE BUYING. ONLY WHAT IS PICTURED IS INCLUDED. IF IT IS NOT PICTURED. IT IS NOT INCLUDED. Please view Our eBay auctions for plenty more equipment. Save on Shipping Local pickups are free and welcome! International Buyers We may allow international purchases for certain items Buying Terms: Do not assume anything. If the description is not clear enough. Please let us know. Please ask any questions you may have BEFORE buying. On rare occasions we reserve the right to substitute an equivalent item(same ... moreexact model) instead of the actual one pictured. Guarantee Terms: This item is guaranteed. If it does not perform as described above. You may qualify for a refund. In such a case, you must contact us within 5 days of delivery. Return shipping is at the buyer's cost and is the buyer's responsibility. Return Policy: Read the description and view the pictures thoroughly. If anything is unclear. Simply email us and ask questions before buying. If you purchase an item in error, you may return it provided you contact us within 5 days of delivery. You will be refunded the purchase amount, less a 10% restocking fee. We cannot refund shipping due to customer error. Payment Terms: Payment is due within 7 days. If paying with PayPal. Your order must ship to the exact address on your payment. Shipping Terms: Shipping quoted is for shipping and handling in the Continental U.S. only(excludes Alaska and Hawaii) Most Orders will ship via FedEx. Some times we use other methods such as USPS. Only orders totaling $250 or more will require signature upon delivery. Most items ship within 2 business days. Local pickups at our Maryland facility are more than welcome. Internation
|
|
Lot of 3 Swivel Casters with Threaded Stem 2 with Side Brake 4" Diameter Wheels
Lot of 3 Swivel Casters with Threaded Stem 2 with Side Brake 4" Diameter Wheels Click Images to Enlarge Lot of 3 Swivel Casters with Threaded Stem 2 with Side Brake 4" Diameter Wheels Size:4" diameter wheels. Approx. 6" from top of thread to bottom of wheel. Condition Notables:Like new! What a Great Find! We are not perfect. We are not experts. So if you receive an item that does not meet your satisfaction. Please contact us. We will do everything we can to make you a happy satisfied customer. The pictures tell the story. Sold as it is in the pictures! What else can I say. Email with any questions. Thanks for looking! We Gladly combine shipping. We DO NOT ship to APO's. We ship most items via USPS and ship within 2-3 days of receiving Payment International Buyers– Please Note: Import duties. Taxes, and charges are ... morenot included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. PLEASE. IF YOU HAVE A PROBLEM OR COMPLAINTS AFTER RECEIVING YOUR ITEM, CONTACT ME AND WE WILL WORK THINGS OUT PRIOR TO JUST GIVING ME NEGATIVE OR NEUTRAL FEEDBACK! THANK YOU! Payment must be received within 7 days of purchase We ship most items USPS and ship within 2-3 days of receiving payment. We gladly combine shipping. inkfrog terapeak. I000000.
|
|
Casters Lot app 2 In size
Casters Lot app 2 In size COLLECTIBLE Caster Lot app: 2 In size as pictured
|
|
Lot of COLSON 8 x 2 & 6 x 2 Hi-Tech Performa Heavy Duty Casters
Lot of COLSON 8 x 2& 6 x 2 Hi-Tech Performa Heavy Duty Casters Up for sale is this mixed bin of Colson Hi-Performa Caster wheels. They are as pictured. Seller does not know the quantity and selling these as a lot only. Some are 8 x 2s and some are 6 x 2s. Condition: used. Mixed lot Delivery: Delivery is by Freight International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" ... moreUS and International government regulations prohibit such behavior. Payment: Paypal or credit card payment is required within 3 days of purchase. Unpaid items are relisted at buyers expense if we are not notified. Florida shipments or local pickup requires that we collect 7% Florida sales tax. Returns: 14 day return policy. Please contact us if there is a problem before leaving feedback. We want to encourage good communications and the best possible Ebay transaction. For used merchandise- while we offer refunds for items sold we encourage the buyer to inspect the condition via the photographs. Please request additional photos after purchase if not sure of condition. Please supply email address to seller. The buyer is fully responsible for the cost of return shipping for purchase refund. No exceptions for UPS. USPS, FedEX or Freight.
|
|
3 1-1/2" Black Rubber Swivel Stem Wheels / Casters 5/16" Metal Grip-Ring Stem
3 1-1/2" Black Rubber Swivel Stem Wheels/ Casters 5/16" Metal Grip-Ring Stem Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge THIS LISTING IS FOR A LOT OF 3 RUBBER BLACK CASTER WHEELS IN GENTLY USED CONDITION. SWIVEL TYPE WITH BEARINGS. HOUSING IS STEEL. APPROX MEASUREMENTS: WHEEL: 1-1/2" DIAMETER STEM LENGTH: 1-1/2" STEM DIAMETER: 5/16" Part of Stem HOLDER Outside Diameter measures is 3/8" TOTAL LENGTH OF STEM& WHEELTOGETHER: 3-1/2" click on images for a larger picture#3530 We offer shipping discounts for multiple purchases that can be combined in the same package. To be eligible for the discount. Do not pay first, but PLEASE wait for our invoice which includes the discounted shipping rate. We accept Paypal as our form of payment and payment must ... morebe received within 4 days of purchase. Ebay automatically files a Non-Paying bidder claim if payment is not received within the stated time frame. Please note that"e-check" payments have a waiting period to clear. This is typically about 4 business days for domestic payments and anywhere from 6-10 business days for international payments. We do not ship until the payment has cleared thru Paypal. Keep this in mind if you are wondering why your package did not ship immediately. For International shipments our shipping costs only cover the transportation to your country. It DOES NOT cover fees collected by your country for customs/ duty tax. This is YOUR responsibility and has nothing to do with the cost you paid to ship the item to you. We DO NOT forge the customs documents to alleviate that tax, so PLEASE DO NOT ASK. Items usually ship within 1 day of receiving payment. Your items will be carefully wrapped and shipped promptly to your door. We have a very small handling fee to cover packaging. Bubble wrap, tape, shipping labels, etc. We normally ship via USPS Priority Mail, Parcel Post and First Class for US shipments. USPS Priority Airmail for International shipments. I
|
|
Set of 2 Ball Casters With Chrome Hooded Finish
WELCOME HERE ARE TWO BALL CHROME HOODED CASTERS WITH THE WOOD LEG ATTACHED THEY ROLL AND SWIVEL WITH EASE AND WORK AS THEY SHOULD THE WOOD SHOWS WEAR NOT SURE ON THE AGE THIS HARDWARE CAME FROM AN ANTIQUE STORE ALONG WITH OTHER ITEMS i WILL BE LISTING. THEY MEASURE APPROX. 6 1/2" FROM THE END OF THE THREADED BOLT TO THE BOTTOM OF THE BALL HAVE ANY QUESTIONS PLEASE ASK BEFORE PURCHASING. THANK YOU FOR YOUR INTEREST AND PLEASE FEEL FREE TO BROWSE THROUGH OUR OTHER LISTED ITEMS.
|
|
(2) - 2" Faultess Stem Casters
This listing is for(2) Faultless 2" wheel casters with a 5/16" x 1.5" stem. But come with plastic slip overs to provide a stem of 1/2" in diameter. Unsure if these casters have ever been used but the package has been opened so I am listing these as used. All are in good working order and will work on beds, furniture ect.
|
|
set of 4 Hamilton Extreme Heavy Duty Casters 2 swivel, 2 fixed Steam Punk?
This listing is for the set of 4 Hamilton Extreme Heavy Duty Casters as shown in photos. 2 casters swivel and the other 2 are fixed. They all have lube/grease ports on them. No model number visible anywhere. These Measure. In inches; 7.75 High with base 3" Wide fixed wheels 2.5" Wide swivel wheels All 4 wheels are just under 6" Diameter Bolt holes center to center is 3 X 5 inches Could Possibly be used by a Steam Punk Artist? These casters work fine. Well greased. Very Heavy I have a second set of 4 exactly the same. Shipping is via Fedex Ground to a business address. Ask any questions. Thank You. Kevin Gildea Gildea Company 781-243-9699 dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-145b98426b2-0x10a-
|
|
Lot of 20 of 2“ BALL BEARING CASTERS, SHINY CHROME HOOD
20 of 2 inch ball bearing casters Shiny chrome hood 7/8 inch grip ring stem that is 7/16 inches in diameter 80 lb. load All in perfect working order.
|
|
Vintage Antique 9 Wheel Casters 2 1/2" and 1"
You are bidding on Vintage Antique 9 Wheel Casters 2 1/2" and 1" Here are 2 sets of 4 2 1/2" casters and 1 cast iron 1" 9 total. Please check our other tools listed, we will gladly combine shipping. Good luck bidding. Thanks for looking.
|
|
5 BALL CHAIR CASTERS, 2 INCHES DIAMETER
5 BALL CHAIR CASTERS. 2 INCHES DIAMETER
|
|
Set Of 2 Extra Tall/Heavy-Duty 4" Inch Swivel Wheel Casters 1 Has Brake (Plate)
Set Of 2 Extra Tall Swivel Wheel Casters. The wheels are 4" inch and are made of hard plastic. 1 caster has a brake. The tops are a flat plate with 4 screw holes. Total height from the bottom of the wheel to the top plate is about 9" inches. see photos) Both are in good working condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-145cd70909e-0x110-
|
|
4 BLACK 2.0" SWIVEL HEAVY DUTY CASTERS WITH FASTENING PLATES
4 BLACK 2.0" SWIVEL HEAVY DUTY CASTERS WITH FASTENING PLATES 16 FREE SCREWS ARE ATTACHED AS A GIFT! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-145e12ab21e-0x119-
|
|
5" x 2" Heavy Duty Polyurethane Casters - Rigid & swivel. set of 4
WHEEL SIZE 5" X 2" STEEL COVERED WITH POLYURETHANE NON MARRING POLY TIRE HEAVY DUTY about 800 lbs each wheel FRAME STEEL SET OF 4 2- RIGID 2- SWIVEL like new Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Please ask all questions before you bid Some pitchers may not match parts exactly To the best of my knowledge all parts are in good shape and or working order unless noted Original shipping is not refunded on returned items Used parts are sold as is Parts that are sold AS IS are not guaranteed or eligible for any type of credit or refund It is the buyer’s responsibility to make sure parts are correct fit Items are for sale locally so I reserve the right to remove this ad at any time I will only ship to the 48 US states Thanks for looking Good luck bidding
|
|
(2) Large Non - Swiveling Casters (8"x2")
2) Used 8" x 2" Non- Swiveling Casters. Each Caster has A Zirc Fitting for Greasing. Please ask any Questions before Purchasing. Thanks
|
|
9G24 CASTERS FROM MECHANICS CREEPER, 3 PCS, 2-1/2" WHEELS, 3-1/8" LIFT, GC
THANK YOU FOR VISITING OUR STORE* ITEM DESCRIPTION CASTERS FROM MECHANICS CREEPER. 3 PCS, 2-1/2" WHEELS, 3-1/8" LIFT, GOOD CONDITION INVENTORY CODING INFORMATION. 111324 9G 24 3-May CURB 3858-9G24 WHEELS CASTERS FROM MECHANICS CREEPER. 3 PCS, 2-1/2" WHEELS, 3-1/8" LIFT GC P24913 13Z NET $18.00 FREE F/R A RESTOCKING FEE OF UP TO 25% MAY BE CHARGED ON RETURNED ITEMS. IF THE SALE OFFERS FREE SHIPPING. IT APPLIES TO THE 48 CONTIGUOUS STATES ONLY! EXTRA CHARGES MAY APPLY FOR APO/FPO, AK, HI, GU, VI, ETC. ANY AND ALL CUSTOMS AND DUTIES ARE THE RESPONSIBILITY OF THE PURCHASER! IF THE ITEM IS MAILED INTERNATIONAL FIRST CLASS. THERE IS NO INSURANCE, AND THE BUYER IS RESPONSIBLE FOR LOSS/DAMAGE. IF THE BUYER WISHES TO UPGRADE TO PRIORITY MAIL WITH INSURANCE, PLEASE CONTACT US BEFORE BUYING! Powered by The free listing tool. List ... moreyour items fast and easy and manage your active items.
|
|
*4* VINTAGE SHEPHERD 2" FURNITURE BRASS CASTERS WHEELS-SATURN SWIVEL BALLS
Vintage Shepherd Saturn Furniture Casters Set of Four Solid. Quality construction. Bright golden brass. 2" diameter. Very little wear- please see photos for details.
|
|
VINTAGE FAIRBANKS CO., 5MR, CAST IRON SWIVEL CASTERS, 21-5 USA 2 PCS
VINTAGE FAIRBANKS CO. 5MR CAST IRON SWIVEL CASTERS. 2 CASTERS, OFF OF A VINTAGE FLAT INDUSTRIAL CART. WHEELS ARE APPROX 4 3/4" THEY ARE STAMPED FAIRBANKS 5MR THE CASING IS STAMPED FAIRBANKS 21-5 USA GOOD USED CONDITION. SEE PICTURES FOR FULL CONDITION DETAILS EMAIL ANY QUESTIONS. THANKS! 4095 SHIPPING PRICE FOR LOWER 48 STATES 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1466f7c33ee-0x11b-
|
|
Set of 4 HD Industrial Locking Scaffold Casters with 8" x 2" Caster Wheels
Condition: Used. In good condition. You are looking at a set of 4 large scaffolding caster wheels. These casters measure 13 1/2" Long. The stems are 3 3/4" L. The wheels are 8" in diameter x 2" thick. All wheels spin freely and all brakes work.
|
|
Lot of 2 Swivel Wheel Casters 7/16" x 1" Grip Ring Stm 2-3/8" wheels
Up For Sale: Lot of 2 Swivel Wheel Casters 7/16" x 1" Grip Ring Stem The pictures shown are of the actual items up for auction. These items are used. Please read the full condition description before bidding on these items. Please contact me if you have any questions. Thanks for looking at my listing.
|
|
4 Faultless Steel & Nylon Casters 2 Swivel 2 Fixed 4"dia. Bolt Pattern 3"-2 3/4"
4 Faultless Steel& Nylon Casters 2 Swivel 2 Fixed 4"dia. Bolt Pattern 3"2 3/4" Excellent used condition Made in the USA Please look at the pictures as our photos are a large portion of our description and what you see is what you get. If you don't see it in the photo's it is not included. If you have any questions please ask before you purchase this item and i will answer them promptly(usually within an hour) Shipping Information Ships from Chicago same day as payment with insurance and tracking. International buyers please ask to see if this item is available for international shipping. Also please be aware that we are not responsible for customs fees added by other countries. Important Your satisfaction is our number one goal. If you feel we don't deserve positive 5 star feedback in all categories for any ... morereason please contact us before you open a case or leave your feedback so we can( and we will) resolve any issues you might have. Check out or great feedback and buy with confidence. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-146a5d47422-0x109-
|
|
Vintage Fairbanks 4" Cast Iron Industrial Swivel Casters - Set of 2
Nice old pair of heavy. Cast-iron swivel casters. Functioning properly.
|
|
Faultless Medium Industrial Casters 4" x 2" Wheels 2 Swivel Brakes 2 Rigid Zinc
Faultless Medium Industrial Casters 4" x 2" Wheels 2 Swivel Brakes 2 Rigid Zinc Description: Normal 0 false false false MicrosoftInternetExplorer4 For sale is a set of four used Faultless Medium Duty Casters with 4" x 2" wheels. Two casters are rigid; two are swivel with brakes. Not sure of the wheel material. The rigid wheels have an"A" on one edge and the number"15" on the other edge. The swivel wheels have an"A" on one edge and the number"24" on the other edge. Casters mount with a top mounting plate and are finished in zinc. These casters most closely resemble the 1400 series on the faultlesscasters.com website. Made in the good ol' USA! Dimensions are as follows: Mount Plate: 3 7/8" x 4 1/2" Caster Height: 5 5/8" Bolt Hole: 2-5/8" to 3" x 3" ... moreto 3-5/8" The mounting plates and supports are in excellent condition. The wheels show signs of wear from normal use. Please look at the photos. We have tried to capture any minor imperfections as best as we could. Note: These casters are heavy and weigh over 18 pounds packed. The most economical and fastest shipping is USPS Priority Mail Medium Flat Rate Box at $11.30. This is the exact discounted online price from the post office. Thanks for looking! Payment: Normal 0 false false false MicrosoftInternetExplorer4 We require immediate payment for Buy It Now sales and payment within 3 days of an auction's close. All nonpayers will be reported to eBay for appropriate action after 7 days. We accept PayPal only and we ship within one to two business days after payment. We will ship only to a confirmed address in PayPal. So please make sure that your address is correct and confirmed in PayPal before you bid. International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are your responsibility. Please check with your customs office to determine what these additional costs will be prior to bidding/buyin
|
|
Set of 4 Swivel Casters 3-1/2" Wheel Side Locking More available!
Set of four casters. 3-1/2" x 1-1/4" non marking polyurethane ball bearing wheel. 2-1/2" x 3-1/2" mounting plate, 4-5/8" overall height. Very good lightly used condition. Purchased for temporary in-shop use and no longer need so many casters taking up space. These are exellent quality casters in great shape. Just a little dusty and with a little"stuff" on the wheels from rolling on a shop floor(woodworking shop, nothing too nasty) I have a total of 24(six sets of 4) of these casters and I also have 20(five sets of 4) of the same casters but without the side locks. If you need more than one set. Or want to mix locking and non locking casters, please write me a note and I will try and make that work for you. Check my other items for the non locking casters. Shipping will be flat rate postal service. If the ... morepurchased quantity ends up on the large side. I may do it FedEx to keep the shipping as low as possible.
|
|
Set of 4 Payson Casters (2 Swivel, 2 Ridged, Only 3 with Locks)
Description: Set of 4 Payson Casters(2 Swivel. 2 Ridged, Only 3 with Locks) Used, fair condition. Shipping: FREE SHIPPING! Item will be shipped via USPS within 1 business day of purchase. Return Policy& Customer Care: Please refer to my feedback to insure you are buying from a%100 positive eBayer. The item will be described and arrive as accurately as possible. Please contact me before leaving feedback. As I will offer a 14 day return period for any unsatisfied customers. Thank you for your business!
|
|
HEAVY DUTY CASTERS LOT OF 4 =2 SWIVEL AND 2 STATIONARY, 4" WHEEL INCLDS HARDWARE
This is a listing for a lot of 4 Casters and the hardware you will need. There are 2 that are swivel. And 2 that are stationary/rigid. The wheel is about 4" in diameter and about 2" in width. The bag of hardware has the nuts, bolts, washers, and lock washers you will need. All 4 casters have an oiler for lubricating the wheels bearings. The 2 swivel casters have grease fittings for the bearings. Each swivel caster weighs almost 4 lbs. Each stationary/rigid caster weighs about just over 3 lbs. I am listing these as used. But I do not see any true signs they were ever used. These were given to me, but I never used them. Check out the pictures. Please view the pictures as these are pictures of the actual item you are bidding on and will receive as winner. Don’t forget to zoom! Pictures are part of the description of the item. I have ... moreattempted to clearly describe by both word and picture the item with as much detail as possible. CONTACT ME if you have ANY QUESTIONS BEFORE YOU BID OR BUY- including how measurements. If any, were taken. NO RETURNS ACCEPTED PLEASE. PayPal only please. If you purchase an item on a Buy-It-Now listing please pay immediately. Or contact the seller. Please pay within two days of your winning bid at the end of an auction style listing. If you are having difficulties please contact the seller. If you pay by PayPal’s echeck I will ship your item within one business day of the cleared check payment. Please understand this could be several days after you actually make your payment. I will message you once your payment has cleared and the item ships. No international shipping. THANK YOU for your time to look at this listing. b380
|
|
Set Of 4 8" X 2" Heavy Duty GREASABLE Rubber Casters
Set of 4 solid rubber with cast centers. Set includes two swivel and two stationary with a 4"x4.5" mounting pad. These casters are greasable with grease fittings. The stationary has grease fittings for the wheel bearings and the swivel casters have them for the wheel bearings and another for the swivel bearings as well. These are used so they will have bolt marks and some of the rubber may have some dents/small pieces in the rubber but all still look very good. I have many sets so you may not get the actual set in the pictures but all of them are exactly the same in looks and condition. IF YOU WANT MORE THAN ONE SET THERE CAN NOT BE ANY COMBINED SHIPPING. THESE ARE HEAVY AND THE AMOUNT THAT IS CALCULATED IS WHAT IT COSTS TO SHIP THE SET. Each set will be sent in its own box. Please ask any questions before buying. Calculated shipping ... moreis for the lower 48 states all others please send zip code for quote SORRY NO FOREIGN SHIPPING
|
|
Lot of 16 Black Plastic 2 inch Twin Wheel Swivel Casters 1 inch Stem
NEW AND USED LOT OF PLASTIC CASTERS WITH 2 INCH TWIN WHEELS AND 1 INCH METAL STEMS ALL ARE IN EXCELLENT CONDITION EXCEPT FOR A FEW MINOR SCRATCHES
|
|
LOT OF 4 SWIVEL CASTERS HEAVY DUTY 8" X 2" WHEELS ALUMINUM CENTER RUBBER
Four swivel aluminum center. Heavy duty, casters. Rubber on outside of caster. Measure 8" x 2" Nice set. Lots of use left in them. Thank you for viewing 614-12777-63
|
|
Set of 4 Noelting Faultless Antique Casters Wheels Swivel No. 2
Antique Noelting Faultless Casters(No.2) Set of 4 Used set of 4. Has rust and normal wear and tear. Good for that vintage antique look. If you have any questions. Please feel free to ask. Thanks for viewing and good luck bidding.
|
|
Set of 4 Vintage Bassick Swivel Casters Grip Neck Stem 2" Plastic Wheels
Set of 4 Vintage Bassick Swivel Casters Grip Neck Stem 2" Plastic Wheels Set of 4 swivel casters. Bassick. Copper color metal. Sturdy plastic(polypropylene) wheels are 2" x 3/4" Gripneck sockets for use on wood. Stems have 1-1/2" tubular grip ring sockets for a snug fit. One of them has tarnish on the neck and gunk in the ball bearings. Pics 7, 8.but it still swivels. The other 3 are in great condition! Free shipping in the USA! I would really appreciate a note if you aren't able to pay right away. Thanks! International bidders please be aware that you're responsible for knowing your country's Custom's Rules and Fees. I ship the day after I receive your payment.sometimes even the same day. I cannot guarantee delivery times. the Post Office is in charge of that. On International purchases and any items without ... morefree shipping I will try to save you money and combine shipping when you buy more than one item. International buyers please be aware that even though I ship right away. I cannot guarantee delivery times. Your item may be held up in your country's Custom's Office. I will accept returns if notified within 14 days. I work very hard to earn Positive Feedback and 5-Star DSR ratings. So before leaving anything less, please get in touch with me. I'm sure we can come to a satisfactory conclusion! Thank you for visiting! Please let me know if you would like more info. Measurements or photos. I will be happy to oblige!
|
|
SET OF 2 VINTAGE BASSICK MOVER CASTERS
THIS IS A SET OF 2 VINTAGE MOVER CASTERS. THEY ARE USED. I WILL COMBINE SHIPPING ON ALL OF MY LISTINGS. IF YOU HAVE ANY QUESTIONS PLEASE ASK. I'LL BE GLAD TO HELP IN ANY WAY I CAN. SHIPPING WILL TAKE PLACE THE DAY AFTER YOU PAY FOR THE ITEM UNLESS IT IS NOT A WORKING DAY OR YOU PAY AFTER 9PM. THEN IT WILL BE SHIPPED THE FOLLOWING DAY. ALL OF MY LISTINGS COME FROM A SMOKE FREE CLEAN HOME. Check out my! Be sure to add me to your!
|
|
2 VINTAGE DARNELL CASTERS HEAVY DUTY 5" 175 TK
Part of a collection from an estate. You are getting both pictured. The wheels are 5" in diameter and 1 3/8" wide. The mounting plate is approx. 3 1/2" x 4 1/2" Please email us with any questions and check out our other items listed on ebay. We do combine shipping if we can pack safely together and if items sell the same day.
|
|
5 Super Heavy Duty Colson Casters 5" by 2"
5 Super Heavy Duty Colson Casters 5" by 2" Click Photos to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description About 6 1/2" tall. Will be packed"tightly" in a large flat rate box. Please ask all questions before bidding. Thanks and good luck! Payment and Shipping PAYMENT TERMS: PAYPAL ONLY. SHIPPING TERMS: Items usually ship within two business days of cleared payment. inkfrog terapeak. I000000.
|
|
2 Colson Rigid Casters 6" by 2" Polyurethane
2 Colson Rigid Casters 6" by 2" Polyurethane Click Photos to Enlarge Click to Enlarge Description Used. But minimal wear. 7 1/2" tall. Please ask all questions before buying. Payment and Shipping PAYMENT TERMS: PAYPAL ONLY. SHIPPING TERMS: Items usually ship within two business days of cleared payment. inkfrog terapeak. I000000.
|
|
4 COLSON Swivel Casters 6 x 2 Polyurethane Tread Hi-Tech Polyolefin Core Brakes
4 COLSON Swivel Casters 6 x 2 Polyurethane Tread Hi-Tech Polyolefin Core Brakes Click Photos to Enlarge Click to Enlarge Description Set of 4. Image shown is a stock image. They have been used. But hard to tell when looking at them. Very minimal wear. Significantly lower than the retail price. Please ask all questions before buying. Payment and Shipping PAYMENT TERMS: PAYPAL ONLY. SHIPPING TERMS: Items usually ship within two business days of cleared payment. inkfrog terapeak. I000000.
|
|
Colson Encore 4 Series Large Casters 2" tread up to 1250 lbs - lot of 4
Colson Encore 4 Series Casters- lot of 4- Capacity up to 1250 lbs. 2" tread- Swivel plate
|
|
6-CASTERS 6 X 2, 4 SWIVEL, 2-STRAIGHT LOCKING
6-CASTERS 6 X 2. 4 SWIVEL, 2-STRAIGHT LOCKING TOTAL WEIGHT 30 LB BUYER IS RESPONSIBLE FOR ALL SHIPPING/HANDLING CHARGES
|
|
4 double wheel steel casters 2 1/2" diameter
3 wheels are the same with 4" tall 1 3/8 btween wheels The fourth is a hamilton caster same measurements as other 3 but only 3" tall and 4 bolt mount
|
|
Set Of 2 Antique Cast Iron Industrial Casters Rollers Independent Cleveland
Set Of 2 Antique Cast Iron Industrial Casters Rollers Independent Cleveland Nice original casters with three wheels each. In good used working order. Need some clean up if desire. Measures 6 1/2 long with 1 1/2" wheels. Marked Independent Cleveland on the bottom.
|
|
Set of 4 Colson Swivel Casters with 2-1/2" x 1-1/4" Polyurethane Wheels
Set of 4 Colson Swivel Casters with 2-1/2" x 1-1/4" Polyurethane Wheels Wheel dia: 2 1/2" x 1 1/4" wide top of Plate measures: 3 9/16" by 2 1/2" holes on plate: 1 3/4" center to center by 2 7/8" center to center Overall height: 4" This is for a set of 4 used good condition. Please consult pics. each caster weighs 1 lb 12 oz unboxed
|
|
Set of 4 Vintage Darnell Swivel 3.5" Casters Wheels Model 1663 1/2 - Heavy Duty
Set of 4 Darnell Casters Model 1663 1/2 D 3.5" heavy-duty rubber wheels#16 top plate measuring 3 5/8" x 1 1/2" caster is 4 7/8" tall each weighs about 2 lb. 4 oz. FYI 1st picture in series is best representation of color- the rest turned out bluer than the actual color- paint is a darker blue and wheels are black these are worn and a little dirty but wheels turn and swivel just fine. no structural damage at all. Bid with confidence ~ 100% feedback ~ Shipment almost always within 24 hours and morning orders usually same day many of our items end up shipping quickly via priority USPS Please feel free to contact us with questions re shipping.
|
|
3 Bond 2070 Malleable Iron Swivel Casters 2" Wheels 23-V-2
Up For Sale Today are 3 Vintage~ Bond 2070~ 23-V-2~ 2" Swivel~ Bolt on Casters in Very Good Working Condition with No Damage.
|
|
Set of 4 Industrial 3 1/2" Casters #3568 Heavy Duty Shop Work Tool Cart
This is a nice set of 4 heavy duty Offset Swivel Ball Bearing Casters. Solid bearings that swivel and move as they should! 4 7/8" X 3 3/4" 11680 mounting base plate. 3 1/2" X 1 1/2" rubber wheels. 4 1/2" total height. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-146ee5f0217-0x10a-
|
|
SET OF 4 DARNELL STEEL CASTERS 2 X 6 , OVERALL HEIGHT 7 5/8
SET OF 4. DARNELL STEEL CASTER 2 X 6. OVERALL HEIGHT 7 5/8. MOUNTING PLATE: 6 1/4 X 3 3/4. EACH CASTER WEIGHT 11LB. in working condition. please view all the pictures closely! for details. shipping within 3 days as the payment received. shipping within U S only. thank you.
|
|
SET OF 4 AERO ALUMINUM CASTERS 1 1/2 X 6 , OVERALL HEIGHT 8 5/8
SET OF 4 AERO CASTERS 1 1/2 X 6. OVERALL HEIGHT 8 5/8. MOUNTING PLATE 6 1/4 X 5 1/4. EACH CASTER WEIGHT 11LB. NOTE: ONE CASTER LOST THE FOOT BRAKE[ see the pictures] in working condition. please view all the pictures closely! for details. shipping within 3 days as the payment received. shipping within U S only. thank you.
|
|
SET OF 4 PLASTIC 2.5 INCH TWIN WHEEL PLASTIC WHEEL CASTERS
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! I sell lots of different stuff ~ check out my store I accept the following form of payment. PayPal, 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-146f64225a9-0x10a-
|
|
Vintage Industrial Factory Cast Iron Swivel Casters Bassick #477 Huge 3-1/2"
Four cast iron industrial Bassick casters acquired at an industrial salvage auction. The Bassick Caster Company manufactured casters in Bridgeport. CT and is no longer in existence. These casters are huge and from what I have learned, I believe they probably came from an industrial factory cart. The iron wheels measure 3-1/2" in diameter and each caster weighs well over 6 pounds. They all roll and swivel as they should. Each has a grease fitting and the ball bearings can be seen under the edge of their enclosures. They are marked in more than one place with the manufacturer's name; and the part#477 is prominently stamped on one end of the bases. There are other numbers in various places which are likely part numbers for other components. There is heavy patina/rust and minor visible wear to the wheels. They are also extremely dirty. ... moreI haven't done anything to them as I didn't know where to begin and didn't want to disturb the patina if that was going to be the desired finished product. These are auction pieces being sold as found as is. I cannot guarantee that they have not been exposed to odors: smoking. Fragrance, cooking, mustiness, mothballs, other types of storage odors or pets. To avoid the expense of shipping. Pick up may be arranged in SE CT. If this is a convenient option, please email me prior to making payment so that I may adjust your invoice. I want you to be happy with your purchase so please contact me with any questions. Please read the following terms: Payment is expected by way of PayPal within 3 days of auction's end. If you need more time please contact us. Or. If you wish to purchase other items from us and would like to combine shipping we will be happy to wait for 7 days so you can take advantage of the shipping discount. Email us with your intentions. Please. IMPORTANT: SHIPPING COSTS Shipping costs by way of the US Postal Service are expensive! Normally they are even more so by private carrier(UPS. FED EX, etc. I have weighe
|
|
3 1/2 x 1 1/4 Golson High Tech Perfroma rubber Casters set of 4 swivel
3 1/2 x 1 1/4 Golson High Tech Perfroma rubber Casters set of 4 swivel bases are 3 1/2x 2 1/2 with 4 holes for attaching. swivel and move freely. I do combine shipping on multiple items won. I do not try to make money off shipping. I DO NOT SHIP OUTSIDE THE USA. payment is expected within 3 business days. Please read fully I make all accommodations to make this a good smooth purchase. Your feedback is important to me and I always leave feedback for buyers. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-1470e55c0ab-0x110-
|
|
PALLET CASTERS, (2) 5 INCH AND (3) 4 INCH AS SHOWN USED
THIS IS FOR(2) 5 INCH AND(3) 4 INCH PALLET CASTERS SOLID AND HEAVY AS SHOWN.
|
|
PALLET CASTERS, 2 SETS OF (4) USED
THIS IS FOR TWO SETS OF USED PALLET CASTERS SOLID AND HEAVY AS SHOWN.
|
|
(2) Large Hardened Plastic Swiveling Casters (8"x2")
2) Used 8" x 2" Swiveling Caster. Each Caster has TWO Zirc Fittings for Greasing. Some Simply Have a Little More Grease on Them Than Others or Than the One Pictured. Please ask any Questions before Purchasing. Thanks
|
|
Darnell Casters set of 4- 2 fixed/2 pivoting-2 inch stem with 3 bolt mount
the tires are 4 inch hard rubber. 2 are stationary and 2 pivot 360 degrees. The 4th may or may not function. Depending on your use. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14726841383-0x101-
|
|
SET OF 4 8" X 2" HEAVY DUTY SOLID RUBBER CASTERS W/ GREASE FITTINGS 2 SWIVEL
Set of 4 very heavy duty steel roller casters. 2 wheels have swivel mounts and 2 wheels are fixed. wheels are 8" diameter x 2" solid tires. No chance of flats. These casters are in great condition but have a little bit of surface rust on the rims which you can see in the pictures. They were used on a cart in my woodworking shop to move around a heavy router table. The wheels should be able to hold at least 1500 lbs as a set of four. My router was in the 800lb range and rolled smooth as glass Please see pictures for exact condition and dimensions. thank you for looking. Please see my other items for sale.
|
|
Vtg ALBION BRAND Extra Heavy duty casters 2 Swivel 2 Rigid + 1 Floor Lock Brake
Vintage ALBION BRAND Extra Heavy duty casters 2 Swivel 2 Rigid + 1 Floor Lock Brake 2 Swivel& 2 Rigid 5" x 2" Wheel and 1 Floor Lock Brake EXTRA Heavy duty casters with separate brake Top Plate: 4” x 4-1/2" Bolt Holes: 3” x 3” slotted to 2-5/8” x 3-5/8” THE SWIVEL RIG ON THIS CASTER IS KINGPINLESS SOLID TYPE FOR EXTRA HEAVY DUTY LOADS WITH THE HEAVY DUTY BEARING IN THE WHEEL. Pre-owned good working condition(missing 4 nuts and 4 bolts) need to be cleaned. see pictures for better description.
|
|
Industrial 2" Rigid Plate Casters 9396 - Shepherd Hardware. Lot of 50
Lot of 50 Industrial Shepherd Hardware Rigid Plate Casters 2" Wheel Diameter Load Capacity: 125 Pounds 1-7/8" x 2-5/8" Mounting Plate 15/16" x 1-7/8" Hole Spacing 2-1/2" Overall Height
|
|
Vintage Set of 2 1/2" Bassick Steel Wheel Industrial Swivel Cart Casters Antique
Here We have a Vintage Set of 4 Bassick Industrial Swivel Cart Casters Great for many Vintage industrial projects. They are used and may need some lube but they all move freely and look Gorgeous! Description: Brand: Bassick. Model: 261. Material: Metal Dimensions: Wheel Diameter: 2 1/2" Base Plate: 3 3/4" x 2 3/4" Overall Height: 3 1/4" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1472d2025df-0x113-
|
|
4 GOOD USED 8" x 2" ALBION SWIVEL CASTERS 4.5" x 4" MOUNTS HEAVY DUTY PDO820019
4 GOOD USED 8" x 2" ALBION SWIVEL CASTERS 4.5" x 4" MOUNTS HEAVY DUTY PDO820019. CAST WHEELS WITH SOME KIND OF POLY TIRES, THEY HAVE 2 ZERK GREASE FITTINGS, I DON'T KNOW WHAT THEY ARE RATED WEIGHT WISE? EACH CASTER WEIGHS 7 lbs. 11 ozs. WE BOUGHT THESE AT AN ESTATE SALE, THE CONDITION IS VERY GOOD WITH SOME WEAR, THEY SPIN& SWIVEL FREELY, THERE IS NO BAD PLAY IN ANY OF THEM, THE TREADS HAVE SOME TINY BITS OF METAL SHARDS FROM THE FACTORY FLOOR, THEY ARE READY TO BOLT ON AND GET TO WORK! FREE PICK UP IN BUFFALO NY! EVERYONE LOVES SURPRISES? BUT THAT'S ONE THING YOU WILL NEVER GET WHEN YOU BUY ANYTHING FROM US! WE TRY TO POINT OUT ANY FLAWS IN EVERYTHING WE SELL! ASK ANY QUESTIONS BEFORE BIDDING! PAYMENT WITHIN 3 DAYS OF AUCTIONS END. PAYPAL ONLY. PLEASE! WE WILL GLADLY ACCEPT RETURNS ON ANY ITEM THAT IS NOT ... moreAS DESCRIBED AND AS LONG AS IT IS IN THE SAME CONDITION/ IS THE SAME ITEM THAT WE SENT OUT, WITH NOTICE FROM THE BUYER WITHIN 5 DAYS AFTER RECEIPT OF ITEM. THE BUYER PAYS THE RETURN POSTAGE. PLEASE LOOK AT ALL THE PHOTOS AND READ THE DESCRIPTION CAREFULLY. AS YOU CAN SEE BY OUR FEEDBACK, WE ALWAYS AIM TO HAVE A SATISFIED CUSTOMER. THANKS FOR LOOKING AND GOOD LUCK!
|
|
Engine Stand or Hoist Casters - 2
These casters are made of iron I believe. But I could be wrong. They were removed from an old engine stand. They have been powdercoated gloss black and have not been used since being coated. May have marks from being stored in my garage. I am including two insert sleeves for the hubs. The casters are approx. 3-1/4" diameter and approx. 1-1/8" wide. The inserts are approx. 1-1/2" long. The insert sleeve takes a 3/8" bolt. Included is only what is pictured.
|
|
Snap On Faultless Casters 2 x SH3400-6
I am selling a pair(2) of Faultless Rigid 6x2" spring loaded Casters from a Snap On Master series tool box. They will fit Extreme tool boxes and possibly other manufacturers. They are rated for 1200lbs each. These are used but in decent condition.
|
|
#J760 Lot of 8 Colson Tech-Lock Casters 6' X 2" Locking Brake Wheel Mobile
WE BUY OBSOLETE AND EXCESS INVENTORY! This is a lot of 8 used Colson Tech-Lock casters. These casters are swivel 6" X 2" rubber wheels. There are(6) casters with a brake lock and(2) without. This lot of casters is in great condition with minor signs of use. Need to contact us? We are open 8-4:30 PST Mon-Fri. Our phone number is 858-658-9207. Buyer to pay shipping and handling. unless listed above as local pick up only) We DO consolidate shipping on multiple item purchases! Please see shipping calculator below to calculate your shipping costs. CA. buyers. Please remember to include 8% tax with payment! WE ONLY SHIP TO U.S. and CANADA! Shipments are by UPS only. Unless otherwise listed above or if another option is available on the shipping calculator. Sorry, but all Canada shipments are UPS only and for Canada customers there will ... morebe additional duties, brokerage and taxes due upon receiving your package. We do not know what those charges will be. Please Note: UPS does not ship to APO or PO Box addresses. So we will need a physical shipping address. Items are to be paid for within 5 days of winning bid. If sold for local pick up. Must be picked up also within the 5 days of winning bid. We can ship 3rd party billing to your UPS account number also! Just let us know your UPS account number after winning the bid! Email us for s&h quote if there is no shipping calculator. Please make sure to view our page before bidding. We accept paypal payments. See our terms of sale page for additional payment options. TERMS OF SALE
|
|
Solid Black Hard Plastic Swivel Casters 2 1/2 inch diameter Set of 4 (2 locking)
Up for Auction is a set of 4 Super Strong Casters. 2 1/2" hard plastic wheels. All are swivel. 2 are locking. They are used from a heavy bed frame. They work great but have some dirt and paint on them. Please look at pictures or ask questions before bidding. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1475862bbf1-0x10d-
|
|
Faultless 6" casters 2 fixed 2 swivel medium duty solid rubber tire 1400 series
Used casters good condition. Plate is 3-7/8" x 4-1/2" 1/4" thick. 7-1/2" overall height. Swivel casters are ball bearing with grease fitting. Terms& Conditions: California Residents please add sales tax. Items normally will be shipped UPS Ground. All sales final with no warranties unless stated otherwise. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
COLSON POLYURTHANE SWIVEL CASTERS 5"x2" w/ 4"x4-1/2" TOP PLATE(2) PC. & 2 FIXED
YOU ARE BUYING A QUANTITY OF(4) COLSON CASTERS(2) 5" X 2" SWIVEL WITH 4" X 4 1/2" MOUNTING PLATE. 2) 5" X 2" FIXED WITH 4" X 4 1/2" MOUNTING PLATE. 2) ARE 4"SER 4" 2) ARE 4"5"SER 4" GOOD CONDITION. GREAT FOR TOOL BOXES, ETC. PLEASE LOOK AT PICTURES. NO WARRANTY IMPLIED OR EXPRESSED WHAT YOU SEE IS WHAT YOU GET NO INTERNATIONAL BIDS OR SHIPPING SHIP ONLY TO THE LOWER 48 STATES NO POST OFFICE BOXES ACCEPT PAYMENT BY PAYPAL ONLY PAYMENT MUST BE RECEIVED WITHIN 3 DAYS OF AUCTION CLOSING IF PAYMENT IS NOT RECEIVED WITHIN 3 DAYS THE ITEM WILL BE RE-LISTED AND A NON PAID COMPLAINT FILED NO ZERO FEED BACK BIDDERS WILL SHIP BY USPS WITH IN THREE DAYS OF PAYMENT 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-1476015cf03-0x111-
|
|
Set of 4 - 2" Swivel Plate Casters Black Wheels with Plate and Bearing
Plate is 2 5/8" long and 1 7/8" wide. Wheels are 2" in diameter. As shown in photos. C9-3
|
|
CASTERS [4] 4 x 7/8 2-SWIVEL/2-STATIONARY WHEELS PLATES 3 3/4 X 2 3/4 EXC.COND
CASTERS 4" x 7/8" RUBBER WHEELS FOR QUIET ROLL PLATED: 3 3/4" x 2 3/4" SWIVEL: 2 CASTERS STATIONARY: 2 CASTERS LIGHTLY USED PLEASE…ASK ANY QUESTIONS BEFORE BIDDING I WILL ALWAYS DO MY BEST TO ACCURATELY DESCRIBE THE ITEMS I AM SELLING WITH PHOTOS AND WRITTEN DESCRIPTION. FREE SHIPPING! I ACCEPT PAYMENT THROUGH PAYPAL. BE SURE TO CHECK OUT THE OTHER MOONDOGGIE ITEMS* RETURNS: RETURNS ARE ACCEPTED UNDER THESE CIRCUMSTANCES ONLY: Should you discover this/these item[s] in which you have received are: 1. Not as described in the eBay ad; 2. Damaged from a manufacturing defect; or 3. Obviously damaged from the shipping process. Returns are accepted under those three circumstances ONLY. BOOKS. MOVIES, GAMES AND LITERATURE ARE NOT RETURNABLE. RETURNS ARE ACCEPTED WITHIN 7 DAYS OF BUYER RECEIVING ITEM/S ITEMS RETURNED MUST HAVE ... moreORIGINAL TAGS ATTACHED ITEM MUST BE IN IT'S ORIGINAL[UN-USED/UN-WASHED] CONDITION BUYER WILL BE ISSUED REFUND- MINUS ORIGINAL SHIPPING- AND RESTOCKING FEE 20% PAYMENTS FOR PURCHASES MUST BE MADE WITHIN 4 DAYS OF AUCTION END IF CIRCUMSTANCES MAKE THIS DIFFICULT PLEASE CONTACT BLKMOONDOGGIE IMMEDIATELY. eBAY FILES AN“UNPAID ITEM CASE” AGAINST NON-PAYING BUYERS ON THE 5 TH DAY OF NON-PAYMENT. IF ITEM GOES UNPAID. IT IS RE-LISTED, AND AN UNPAID ITEM MARK IS PLACED ON THE BUYERS ACCOUNT. THIS RESTRICTS BUYER'S FUTURE RIGHTS TO BID ON OR PURCHASE ITEMS. PLEASE CONTACT BLKMOONDOGGIE IF FOR ANY REASON PAYMENT MIGHT BE DELAYED. WE WILL DO WHATEVER IT TAKES TO ASSIST BUYERS IN PREVENTING ACCOUNT RESTRICTIONS] Additional return policy details: All shipping costs related to the returns must be paid by the buyer. We offer a return policy on most items. unless stated otherwise in the listing) All returns must be in original condition; must include the original packaging; and all content must be in-tact. Returns should be packed in proper packaging to avoid damage to the item or it original packaging. When making a return request please contact MoonDoggie Customer Support via eBay Messa
|
|
Iron Casters - Powdercoated - 2
Casters are approx. 4 inches in diameter and 1-1/8 inches wide. They are powdercoated semi-flat black. I made the sleeve inserts which use a 3/8" bolt. I am not sure when these were originally used if they even came with a sleeve. Can be used on engine hoists. Stands, etc. I only have 2 this size.
|
|
Faultless Casters Wheels Only 3069-B 1 3" X 2" Set of Four
You are bidding on one set of 4 Faultless Casters Wheels Only 3069-B 1 3" X 2" These are barely used in great condition. Lots of life left if used for replacements. Product Details Faultless Casters(wheels only) 3069-B 1 3" X 2" Unsure if these are polyurethane or glass filled or Phenolic Resin(very durable industrial duty)
|
|
2 Heavy Duty (Used) Casters - Ball Bearing Swivel - 4 1/2" Tall - 3 3/4" Wheels
This is a used set of 2 heavy duty ball-bearing swivel casters. They are 4 1/2" tall with 3 3/4" rubber wheels(1 3/16 wide) The base on each caster is 3 3/4" L) x 2 3/4" W) Included are 8- 2 3/4 carriage bolts. Flat washers and nuts. Shipping to Lower 48 United States only. Feel free to contact me if you have any questions. Thanks for looking! I strive for 100% complete buyer satisfaction. I am offering hassle-free return with 14-day money back(you pay return shipping) Feedback is very important to both seller and buyer. If there is any problem at all. Please contact me first and allow me the opportunity to resolve the issue before leaving feedback. Paypal Accepted
|
|
Set of 4 - Used Casters - 2 1/4" Tall - 1 1/2" Twin Wheels - 2-Swivel & 2-Fixed
This is a used set of 4 small casters- 2 are swivel and 2 are fixed. They are 2 1/4" tall with 1 1/2" plastic twin wheels(1 1/2 wide) The base on each caster is 2" L) x 1 5/8(W) There are no screws included. I believe the rating is about 75 lbs. per wheel. Shipping to Lower 48 United States only. Feel free to contact me if you have any questions. Thanks for looking! I strive for 100% complete buyer satisfaction. I am offering hassle-free return with 14-day money back(you pay return shipping) Feedback is very important to both seller and buyer. If there is any problem at all. Please contact me first and allow me the opportunity to resolve the issue before leaving feedback. Paypal Accepted
|
|
Set of (4) 6 inch HEAVY DUTY CASTERS / WHEELS. 2 Swivel / 6" / Priority Shipping
Up for bid: Set of four 6inch high casters. USPS PRIORITY SHIPPING! 2-3 day) Heavy duty and in good working order. Came off a bass guitar cabinet. Two wheels swivel and lock.other two are straight. Please note my 100% positive feedback rating and bid w/ confidence. USA bidders only please. Best wishes. Ed
|
|
4 Shepherd Hardware No. 9477 2" Rubber Wheel Casters
SquareTrade © AP6.0 Comes as pictured. About us: We offer a large variety of items and do not specialize in any one area. The majority of our items are acquired through estates. Home sales, storage bins, closeouts etc. We describe them to the best of our ability and use multiple photos to help aid you in your bidding decisions. If you have any questions or concerns please email prior to bidding as we are not specialty sellers and something that may seem obvious to you regarding an item may not be obvious to us. All items are as pictured and described to the best of our abilities. Regarding Classes of Mail and Delivery Times: We are a small operation and ship out twice a week. Due to this please expect a minimum of five business days(even though most orders will ship out sooner) We appreciate your business so please respect our posted ... moreprocessing time. Orders placed between 9:01 am on Wednesday and 9:00am on Saturday will ship the following Tuesday(three days after Saturday) Orders placed between 9:01am on Saturday and 9:00am Wednesday will be shipped on Friday of that week. While Media Mail and Parcel Post are cost effective they are also the slowest methods of transport. Within the continental U.S. lower 48) these can take up to two or three weeks to arrive. When choosing these methods for Alaska. Hawaii. Puerto Rico expect delivery time of a month or more. This also applies to APO/FPO addresses. Please keep this in mind when choosing class of mail during checkout. DO NOT EXPECT TO RECEIVE MEDIA MAIL SHIPMENTS ANY SOONER THAN TWO WEEKS. Sometimes it may arrive quicker. Most times this is not the case. In some instances when Parcel Post is chosen we may upgrade the shipment to Fed Ex Ground since they are a more efficient means of transport. Priority Mail is generally 2-3 business days. However there is no guarantee of this. All domestic orders are shipped with some type of tracking information. This information will be emailed to you when your order is processed and in most cases will be available in the
|
|
MASTER TWIN STAR CASTERS 4 2 3/8" DUAL NYLON WHEEL CASTERSTW-23LH BRIGHT CHROME
Master Twin Star Casters set of 4 2 3/8" Dual Nylon Wheel Casters that rotate independently TW-23LH Bright Chrome Selling as Used but I think they are new never used. Box is beat up a little but the wheels are in excellent condition. I oiled one set of wheels as it was not spinning freely. for Metal office chairs 3/8" diameter x 1 1/8" stem length Twinstar Casters Contemporary. Styling with unsurpassed strength and durability. Superior die cast construction makes this the highest quality dual wheel caster on the market today. 2-3/8" diameter dual wheels rotate independently for easy mobility to minimize wear and tear. Provides strength and performance with a look of today! Weight rating: 100 lbs. per caster. Available with hard or soft wheels. Series 4-Set 5-Set HARD SOFT HARD SOFT TW23 $47.52 $53.48 $59.40 $66.85 Many ... morenew chairs are equipped with hard wheel casters for use on carpeted surfaces only. Hard wheels skate and slide on hard floor surfaces. For safe rolling on chairmats. And all hard floor surfaces, soft wheel casters should be used. Soft wheels provide traction and prevent sliding. We encourage you to EXAMINE the photos carefully. If in doubt. Please ask any questions prior to bidding. We will be happy to explain details. SHIPPING- I ship USPS. Shipping is calculated by Ebay using your zip code. I have no control over shipping cost. I am NOT opted in to the Global Shipping Program by Ebay. Sellers are required to ship to the address on the payment in order to maintain their Seller Protection and you as the Buyer are required to make sure that that address is correct. So if your address is incorrect please change it in Ebay and Paypal before you pay. I package your item as soon as the item is paid and ship the next available shipping time/day. Ebay automatically files an Unpaid Item Dispute after 2 days. If you can't or won't pay at the end of the auction. Then please pass me by and don't waste my time. Powered by The free listin
|
|
Set(4) Swivel Casters Twin Wheel(1 1/2") Black Plastic Chair/Office Replacement
Up for sale is a set of 4 swivel dual/twin wheel black plastic casters. Great for replacement needs in office/home. The wheels are 1 1/2" in diameter with a hood. The steel stems are 3/8" by 1 1/2" long. They have a flat matte black finish. They are in good used condition- no cracks. Roll freely. There are some scratches, scuff marks from use. Please look at description. Pictures and ask questions. Shipping is in addition to item price and shipping will be by first class USPS mail. I try to ship within 1-2 business days of payment. Usually within 24 hrs of payment. Payment thru PayPal only and is required within 48 hours of winning bid. THANK YOU FOR YOUR INTEREST and Happy Bidding
|
|
Lot of 12 Casters - 3 Sets of 4 - Metal, Rubber, 1" , 1 1/2" - Free Shipping!
Please take the time to read the entire listing. Lot details, shipping/return policies, etc. This listing is for a lot of 12 casters. All are in good used condition. Please review pictures and ask any questions you may have. Thank you for visiting my store. Badgerland Secondhand. Please keep in mind that all items in my store listed as"used" are being sold second hand. I do my best to carefully inspect, accurately picture, and correctly describe each listing so that you know exactly what you are purchasing and are pleased with your purchase. These are not my personal possessions, so sometimes I may not be aware of all issues regarding the item's functioning or content, but all purchases are final and all items are sold as is. Please ask any questions you may have regarding the listing, or address any concerns before bidding. ... moreReturns are only accepted for items damaged in shipment. Attention International Bidders. as a standard rule my auctions do not offer inte rnational shipping. This includes Canada. I do sometimes make exceptions for this policy and ship to certain countries if the items are not too cumbersome or valuable. If you are still interested in bidding then you must message me before placing your bid. Any shipments sent out will be Priority Mail without exception. Any international bidders who do not make arrangements with me prior to bidding will have the transaction cancelled. International shipping rules apply to APO/FPO/DPO addresses as well) Thanks!
|
|
Lot of 8 Black Plastic 1 1/4" & 1 12" Twin Wheel Swivel Casters 1/2" & 1" Stem
THIS IS A LOT OF 8 PLASTIC CASTER WHEELS. 4 OF THEM ARE NEW- THESE ARE 1 1/2 INCHES WIDE WITH A 1 INCH STEM. THE OTHER 4 ARE USED BUT STILL IN GOOD CONDITION- THESE ARE 1 1/4 INCES WIDE WITH A 1/2 INCH STEM. GREAT LOT!
|
|
Set of 4 Colson Swivel Casters with 2-3/4" x 1-1/4" Hard Wheels
Set of 4 Colson Swivel Casters with 2-3/4" x 1-1/4" Hard Wheels Wheel dia: 2 3/4" x 1 1/4" wide top of Plate measures: 3 3/4" by 2 3/4" holes on plate: 1 3/4" center to center by 2 7/8" center to center Overall height: 3 3/4" This is for a set of 4 used good condition. Please consult pics. each caster weighs 1 lb 8 oz unboxed
|
|
VINTAGE Antique SET OF 2 HEAVY DUTY Industrial STEEL CASTERS -- 1.5" wide
This is for the casters that you see here. Very. Very heavy duty. 5" diameter wheels, 1.5" wide. Surface rust. Some jaggedness to the edges of the wheels(see photos) Awesome industrial look to them. Mounting plate 7" long, 4.25" wide side to side. All mounting bolts intact. Each is very similar in condition. Each weighs approximately 8# CHECK MY OTHER AUCTIONS FOR ANOTHER PAIR OF HEAVY CASTERS. Please LOOK CLOSELY and be sure to ask any questions you may have.
|
|
Set of Vintage 2" Bassick Model 4814 Metal Wheel Swivel Casters Made In USA
This set of four 2" casters are 1" wide. The casters are ready to go. They are used and they all move freely. If you look at the last picture you'll see that's sawdust not rust and they'll be cleaned before I ship. I Ship to Lower 48 USA States Only.
|
|
Set of 4 STEM Casters (4" Swivel) with 4" Rubber Wheels - 1/2"-13 stems
These are 4 Heavy Duty 4" Rubber Swivel Casters. SPECIFICATIONS: Stems: 1/2"13 tpi Wheel Size: 4" diameter Comes exactly as shown in pictures.
|
|
Set of 4- Faultless Brand- 5" Industrial Casters- 2 Swivel- 2 Fixed
Heavy Duty- Faultless Brand- 5" Industrial Casters- 2 swivel. 2 stationary. These are a set of 4 used but absolutely not abused Industrial type casters. The wheels are 5" in diameter and 1" wide. The mounting plate measures 3 5/8" X 2 9/16 X 3/32" thick. The wheels appear to have been used on a smooth concrete or tile surface as there is no holes or chunks missing from the wheels. The two wheels swivel with ball bearings and the other two are stationary. I tried to show any defects with the pictures and I have to comment on one of the bases are discolored but it no way affects the performance of the caster. They are actually pretty bright and shiney. Each caster weighs in at 15.8oz. I do not know the capacity of the casters however, these are the type used on Industrial Dietary food transport carts. This is a free ... moreshipping purchase. I only accept PayPal and ship to the continental U.S. Thanks!
|
|
Swivel Casters Bassick #477 3-3/4" x 1 1/2" wide
Four industrial Bassick casters. The Bassick Caster Company manufactured casters in Bridgeport. CT and is no longer in existence. The poly wheels measure 3-3/4" in diameter and each caster weighs well over 6 pounds. the over all hieght is just over 5 inches. Tread width is 1.5 inches while the wheel is about 3.75" diameter. If you need a better measurement, please ask. auction is for ALL FOUR casters as pictured They all roll and swivel as they should, each has a grease fitting and the ball bearings can be seen under the edge of their enclosures. They are marked in more than one place with the manufacturer's name; and the part#477 is prominently molded on one end of the base.
|
|
PAIR (2) Vintage Bassick Steampunk Cast Industrial BIG Metal Wheels Casters
For Your Consideration Here is a Pair of Vintage Cast Iron Wheel Casters. One is missing the grease fitting; see photos. Measure 5.5" from top to bottom of wheel. Wheel measures about 4" And holes measure 2 3/4" x 3 3/4" apart. Thanks for looking and please message with questions. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-147ad986b77-0x115-
|
|
SET OF 2 VINTAGE BRASS STEM & SOCKET FURNITURE CASTERS WHEELS 1-2/8" IN DIAMETER
BID WITH CONFIDENCE ITEM DESCRIPTION: SET OF 2 VINTAGE STEM STYLE FURNITURE CASTERS/WHEELS. THE WHEELS MEASURE APPROX. 1-2/8" IN DIAMETER AND THE STEM MEASURES APPROX. 1-4/8" LONG AND APPROX. 3/8" THICK CONDITION: VERY GOOD NOTE: PLEASE READ MY ITEMS DESCRIPTION VERY CAREFULLY BEFORE BIDDING AND FEEL FREE TO ASK QUESTIONS REGARDING THE ITEM. I TRY TO DESCRIBE EACH ITEM AS HONESTLY AND ACCURATELY AS POSSIBLE. PAYMENT: PAYPAL ONLY. PAYMENT IS REQUIRED WITHIN 7 DAYS OF THE PURCHASE. SHIPPING: I ONLY SHIP TO YOUR PAYPAL REGISTERED ADDRESS UNLESS I WAS NOTIFIED OTHERWISE. PLEASE MAKE SURE YOUR PAYPAL ADDRESS IS CONFIRMED. REFUNDS: I STRIVE FOR CUSTOMERS SATISFACTION. PLEASE DO NOT POST YOUR FEEDBACK BEFORE YOU REQUEST A REFUND IF YOU WERE NOT SATISFIED YOU THE ITEM.
|
|
Hamilton - QTY 2 - S-WH-6SPB-4SLZB - Standard Casters Mount: Swivel w/Brake
This is for a set of 2 casters exactly as shown. It has been lightly used if at all. Was purchased from a liquidation sale. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-147b4209c70-0x119-
|
|
16 PCS OF 2" DOUBLE WHEELED SWIVEL CASTERS (1-1/2" W x 2-5/16 H W/ PLATE)
16 PCS OF 2" DOUBLE WHEELED SWIVEL CASTERS. NON-LOCKING(1-1/2" W x 2-5/16 H W/ PLATE) Items comes as shown in picture
|
|
LOT OF 4 HEAVY DUTY LAC ITALY 6-1/4" X 2" BALL BEARING WHEEL CASTERS 1-1/4" BORE
Assorted Lot of 5 Heavy Duty Lac Ball Bearing Casters Manufactured in Italy 6-1/4" x 2" 1-1/4" Bore No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- ... moreyour item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-147cd2e64d4-0x10c-
|
|