|
Ingersoll Rand Hi-Lok Nutrunner- Aircraft,Aviation Tools
Hi-Lok runner in size 7/16" hex to accept hi-lok sockets. No sockets are included with this runner. Based on the very reliable Ingersoll Rand 5 series motor.Good surplus condition. Free Ship! We also ship APO and combine shipping.Check out my other items! Sign up for my email newsletters by adding my eBay Store to your Favorites
|
|
|
Grip Scale & Pin Gauge for Hi-Lok/Hi-Lite,Aircraft Tool
Grip Scale and Pin Protrusion Gauge Set for Hi-Lok. Hi-Lite and other Aircraft Fasteners This is a used set that contains one each of the following: Standard Grip Scale for Hi-Lok. Hi-Lite and other Aircraft Fasteners, Part# ST8706AF Hi-Lite Pin Protrusion Gauge Set. Hi-Shear Part# 2-1522HST Hi-Lok/Hi-Tigue Pin Protrusion Gauge Set. Hi-Shear Part# 2-1522 They are all in good condition. I have many sets and the one you receive will be of the same type and quality as the one in the photo. Please send me an email with any questions. Please look at my other Tool Auctions/Listings. My Ebay Store: http:stores.ebay.com/wjc-tools Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Hi-Lok Socket or Collar Remover, Aircraft Tools
Hi-Lok Socket or Collar Remover This is a used Hi-Lok Socket or Hi-Lok Collar Remover. It is in good shape. You have a choice of one of the following sockets: ST2604A-8-14-4. Hi-Lok Socket, ST2604A-8-14-7. Hi-Lok Socket(1st, 2nd and 3rd Photo) ST2604A-10-14-4. Hi-Lok Socket, ST2604A-10-14-5. Hi-Lok Socket, ST2604A-10-14-7. Hi-Lok Socket, ST2604A-11-11-7. Hi-Lok Socket*Sold Out* ST2604A-11-14-3. Hi-Lok Socket, ST2604A-11-14-5. Hi-Lok Socket, ST2604A-11-14-7. Hi-Lok Socket, ST2604A-12-14-4. Hi-Lok Socket, ST2604A-12-14-7. Hi-Lok Socket, ST2604A-14-14-2. Hi-Lok Socket, ST2604A-14-14-5. Hi-Lok Socket, ST2604A-14-14-7. Hi-Lok Socket, ST2604A-16-14-3. Hi-Lok Socket*Sold Out* ST2604A-16-14-5. Hi-Lok Socket, ST2604A-16-14-7. Hi-Lok Socket*Sold Out* ST2604AC-7-14-4. Hi-Lok Socket*Sold Out* ST2604AC-7-14-7. Hi-Lok Socket, ST2604AA-10. Socket(Used for ... morenuts with limited access. 12 point, 5/16”4th, 5th and 6th Photo) Sold Out* ST1013FC-8-5-14. Hi-Lok Collar Remover*Sold Out* ST1013FC-8-6-11. Hi-Lok Collar Remover*Sold Out* ST1013FC-8-6-14. Hi-Lok Collar Remover(7th, 8th and 9th Photo) ST1013FC-8-8-14. Hi-Lok Collar Remover, For the HiLok Sockets. X– X– X, the first dash number is the Hex Opening in 1/32” increments. The 2 nd dash number is the drive hex in 1/32” increments. The last dash number is length of socket in ¼” increments. For the Hi-Lok Collar Removers. X– X– X, the first dash number is the length of socket in ¼” increments. The 2 nd number is the dash number of the Hi-Lok collar to be removed. The last dash number is the drive hex in 1/32” increments. The socket you receive will be of the same type and quality as the one in the photo. Please indicate the socket you would like when purchasing it. If you would like to purchase multiple sockets please make an offer with the quantity and size details. Please send me an email with any questions. Please look at my other Tool Auctions/Listings. My Ebay Store: http:stores.ebay.com/wjc-tools Powered by The
|
|
|
Aircraft tools hi lok collar sockets
Up for auction is an assortment of hi lok collar sockets. These are 7/16 drive size and you get, from left to right: a removal, 2 7/16" 3 11/32' 3 5/16" 3 1/4" and the botom long 1 is a 3/8" socket. Good luck! I accept payment on pick up. Paypal or I can take your credit card payment over the telephone, it's simple and you get the receipt sent to you smartphone or email, you choice! You will need to email me at end of auction so we can complete the details for the transaction. Usually takes a short phone call to do the transaction. I will combine shipping on multiple items. Please check out my other items! I DO NOT SHIP INTERNATIONAL so please do not ask! I ship using USPS flat rate. Payment is due within 3 days end of auction.
|
|
|
Hi lok Superior tool kit
The tools are brand new. Never used! But the case is worn a little. My loss your gain. Retails for $100 new. So the tool is a 1/4in. roller ratchet, plus pieces to build a handle how you see fit. Posted with
|
|
|
Hi lok intallation kit ITS5-8HK
This kit is made by Inovative Tooling Services. Was a great tool in open areas as well as tight spaces. Fits hi loks 5-8(1/4. 9/32, 5/16, 11/32, 3/8 and a 1/4in. Ratchet as well as set screwed sockets and an assortment of allens/and handle. Posted with
|
|
|
9 PIECE HI LOK TOOL SET SCREW PULLERS SA280-35002-1 SA280-350002-2 / 4
USED 9 PIECE HI LOK TOOL SET/ SCREW PULLERS What you see on the picture is what you will get. You will receive quantity of 9(nine) tools: 2(two) SA280-35002-4 2(two) SA280-35002-2 1(one) SA280-35002-1 1(one) TS/4021/0024 3(three) Unknown Shipping We ship the item within 1 business day after payment is received. We ship Worldwide. We will only ship to the confirmed address on the account. Payment We accept payment via PayPal. Sales tax applies in Wisconsin; taxes will be calculated at checkout. Return Policy We offer a 14 day return policy. Items are only returnable if they have original packaging. Buyer pays return shipping. On free shipping items. You will still be responsible for the outbound shipping charges incurred by Home and Living. There is 20% restocking fee from the purchase price if item is not defective upon our inspection. Or ... morewrong item ordered. Shipping fees are not refundable. Products may be returned without restocking fees if they have been damaged during shipping and are no longer in flawless condition or if they contain blemishes or defects caused by the manufacturer. All damaged products must be reported to us no longer than 14 days after delivery has been completed. To report a damaged item please email us through your eBay account. We usually respond to all damage-related issues within 1 business day. Ars.5-D-4-3 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Aircraft tools Jiffy Air Tools hi lok collar runner 11/32
Up for auction is Jiffy Air Tools collar runner. Drive size is 11/32. Used but works well! Not sure of the model# or RPM as I can't make it out. Good luck! I accept payment on pick up. Paypal or I can take your credit card payment over the telephone, it's simple and you get the receipt sent to you smartphone or email, you choice! You will need to email me at end of auction so we can complete the details for the transaction. Usually takes a short phone call to do the transaction. I will combine shipping on multiple items. Please check out my other items! I DO NOT SHIP INTERNATIONAL so please do not ask! I ship using USPS flat rate. Payment is due within 3 days end of auction.
|
|
|
L17-Lot of 4 Ingersoll Rand & Cooper Gardner Denver APT Hi-Lok Pancake Nutrunner
Lot# 17 Lot of 4 Aircraft Air Hi-Lok Pancake Nutrunner 1. Ingersoll Rand size 7LMU1 Rpm 1400 2. Ingersoll Rand 3. Gardner Denver Cooper model H16NR25G12 Speed 350 4. APT We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions Shipping is only in USA $20 This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, ... moreor Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
Omega Hi Lok Roller Ratchet - 1/4" Drive - RR130SP
Omega RR 130SP Roller Ratchet- 1/4" Drive- 130 FT Lb Max- Excellent condition- ID#s on shaft(See pictures) If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13eeef0dcf1-0xef-
|
|
|
Omega Hi Lok Roller Ratchet - 3/8" Spindel Socket
Omega Roller Ratchet- RR40- For use with 3/8" Nuts and Hi Lok's- B" e ngraved on handle. ID# s sanded off. Approximately 7.25" long* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
ATI Stubby Hi Lok Roller Ratchet - 7/16" Spindel Socket
AT I Roller Ratchet- ATSK3539 1T- For use with 7/16" Nuts and Hi Lok's- Excellent condition- Approximately 3.6" long- Some sanding marks(See pictures) If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Omega Hi Lok Roller Ratchet - 7/16" Spindel Socket - RR130
Omega RR 130 Roller Ratchet- For use with 7/16" Nuts and Hi Lok's- Excellent condition- Approximately 7.3" long- B" engraved on the side(See pictures) If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund. e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13eeef0da4c-0xf6-
|
|
|
Omega Hi Lok Roller Ratchet - 1/4" Spindel Socket - RR40
Omega RR40 Roller Ratchet- For use with 1/4" Nuts and Hi Lok's- 1/4" Spindle Socket- Excellent condition- ID#s on the side(See pictures) If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Fairchild Hi Lok Roller Ratchet - 1/4" Spindel Socket - RWB40A-25
Fairchild Roller Ratchet- For use with 1/4" Nuts and Hi Lok's- RWB40A- 25- 1/4" Spindle Socket- ID#s have been sanded off(See pics) If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
VS Aerospace Hi Lok Roller Ratchet - 5/16 Spindel Socket - RWB40A-31
VS Aerospace Roller Ratchet- For use with 5/16 N uts and Hi Lok's- RWB40A-31- 5/1 6 Spindle Socket- Has engravings(See pics) If you p urchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Hi-Shear Corp -6 Pistol Grip Hi-Lok Collar Driver/Runner Aviation Aircraft Tools
Hi-Shear Corp. 6 Hi-Lok Collar Driver! Solid Aviation Precision) Mfg. Hi-Shear Corp. Model: HLA1085-6• Serial No: AEC27 004{Actual Photo's of first to go} Excellent for confined spaces and hard to reach areas! The installation is fast and quiet without conventional riveting noise. Makes Skin replacements. Repairs and Patches a whole lot quicker! Includes: 11/32" 6 point socket. 2" long and 5/64" Allen wrench pin! The pin can be easily replaced simply by cutting an allen wrench to length. Sliding it into place and tightening the small allen set screw. For 6/32. 6 Hi-Lok's! Excellent working condition! 3 lbs 15.3 ozs. Greased up and ready to ship! World-wide Shipping! SATISFACTION GUARANTEED! Check out my! Statement of Policy's& Procedures: On-Line Sales Only! Payment must be made within fourteen days of auction ... moreclose. If you need more time to pay you will need to contact us. Buyers pay calculated shipping costs as shown in the“ Shipping and payments” section. To save you money on shipping cost we combine multiple items into USPS Flat Rate Boxes when shipping. We can also combine eBay auction items with items on our website for additional savings. We do not charge handling fees. Acceptable payment methods include: PayPal, Pay on PayPal's web-site with e-check. Credit or debit cards} We use the United States Postal Service for all shipments unless otherwise stated. If you need a certain shipper you will have to contact us. We comply with all foreign customs policies. We do not falsify customs declaration values of purchased items for international shipments.
|
|
|
Omega Hi Lok Roller Ratchet - Double Ended - RR2E40SP
Omega Roller Ratchet- RR2E40SP- Double e nded- No owner markings* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Zephyr Hi-lok Pliers ZHP-100 Aircraft Tools
Great Zephyr Hi-Lok pliers. ZHP 100. 14-day return policy. Buyer must pay return shipping. Check out our other tools. Posted with 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13f28935264-0x108-
|
|
|
Hole Finders Strap Duplicators Hi-lok Zephyr Pliers Aircraft Tools
5 Piece Hole Finders Strap Duplicators#40#30#21#10 1/4" Pilots May Be Inverted Zephyr Hi-lok Pliers Some Wear Prior Use Work As Designed Good Condition 100% GUARANTEED All Tools are in good working condition. Tools may have normal wear. Chemical stains, paint, etchings, Tool marks etc. Check out our other Hi-lok tools and ratchets http:stores.ebay.com/justplanetools We carry a large selection of Aircraft Tools and accessories for all budgets. We ship worldwide $25.00. Canada $20.00. All items must be paid for within 7 days of auction close. We combine shipping costs on mutiple items. Overseas Buyers Note. New Shipping Rates Now Apply. We Ship USPS As Iowest Possible Cost $25.00. We Combine Shipping On Multiple Purchases. BUY IT NOW ALL ITEMS THEN REQUEST TOTAL FROM SELLER. You will receive combined shipping Discount. If your overseas ... morebuyer contact us first if you have any questions about shipping costs. Customs forms and payment, etc. E-mail us with any questions. Thanks for shopping.
|
|
|
Omega Hi-lok Roller Ratchet Zephyr Pliers Grip Gauge Allen Hex Aircraft Tools
Reversable Omega Hi-lok Roller Ratchet Prior Owner Engravings On Handle 1/4" Drive 11/32" Socket Allen Key Hex T Handle's 3/32" 5/64" Hi-lok Grip Gauge Hi-lite Go-No-Go Gauge Zephyr Hi-lok Pliers Some Wear Prior Use Work As Designed 90 Degree Phillips#2 Offset Screw Driver Good Condition 100% GUARANTEED All Tools are in good working condition. Tools may have normal wear. Chemical stains, paint, etchings, Tool marks etc. Check out our other Hi-lok tools and ratchets http:stores.ebay.com/justplanetools We carry a large selection of Aircraft Tools and accessories for all budgets. We ship worldwide $25.00. Canada $20.00. All items must be paid for within 7 days of auction close. We combine shipping costs on mutiple items. Overseas Buyers Note. New Shipping Rates Now Apply. We Ship USPS As Iowest Possible Cost $25.00. We ... moreCombine Shipping On Multiple Purchases. BUY IT NOW ALL ITEMS THEN REQUEST TOTAL FROM SELLER. You will receive combined shipping Discount. If your overseas buyer contact us first if you have any questions about shipping costs. Customs forms and payment, etc. E-mail us with any questions. Thanks for shopping. Posted with
|
|
|
Snap-On 12 Point 5/16" - 11/32" Hi-lok Box Ratchet
Used Snap-On 12 Point 5/16" 11/32" Hi-lok Box Ratchet Good Condition Prior Owner Engravings As Shown USA made. 100% GUARANTEED All Tools are in good working condition. Tools may have normal wear. Chemical stains, paint, etchings, Tool marks etc. Check out our other Hi-lok tools and ratchets including Omega. Hi-Shear, Blue Point, General, Continental, Zephyr and more. http:stores.ebay.com/justplanetools We carry a large selection of Aircraft Tools and accessories for all budgets. We ship worldwide $15.00. Canada $10.00. All items must be paid for within 7 days of auction close. We combine shipping costs on mutiple items. Overseas Buyers Note. New Shipping Rates Now Apply. We Ship USPS As Iowest Possible Cost $15.00. We Combine Shipping On Multiple Purchases. BUY IT NOW ALL ITEMS THEN REQUEST TOTAL FROM SELLER. You will receive combined ... moreshipping Discount. If your overseas buyer contact us first if you have any questions about shipping costs. Customs forms and payment, etc. E-mail us with any questions. E-mail: justplanetools@yahoo.com Thanks for shopping.
|
|
|
Omega Hi-lok Ratchet Kit 18 Piece Aircraft Tools
Omega Hi-lok Tool Kit 18 Piece Set 1/4" Omega Hi-lok Ratchet 5/16" Socket 11/32" Socket 1/4" Socket 1/4" Ratchet Hi-lok Box Ratchet 1/4" 5/16" Hi-lok Box Ratchet 5/16" and 11/32" Hi-lok Box Ratchet 7/16" and 1/2" Zephyr Hi-lok Pliers Screw Puller Skin Spoon Allen Key Handle 1/8" Allen Key Handle 5/64" Allen Key Handle 3/32" Hi-lok Grip Gauge Hi-lite Go-No-Go Gauge 90' Off Set Screw Driver#2 90' Off Set Screw Driver#3 100% Guaranteed Book Mark Our Store: http:stores.ebay.com/Just-Plane-Tools?rdc=1 More Hi-lok Tools Look Here: http:stores.shop.ebay.com/Just-Plane-Tools_Hi-Lok- Tools_W0QQ_fsubZ246695014QQ_sidZ15697994QQ_trksidZp4634Q2ec0Q2em322 Tools are in good working condition. Tools may have normal wear. Chemical stains, paint, etchings, tool marks etc. Check out ... moreour other Hi-lok tools and ratchets: http:stores.ebay.com/justplanetools We carry a large selection of Aircraft Tools and accessories for all budgets. We ship worldwide $25.00. Canada $20.00. All items must be paid for within 7 days of auction close. We combine shipping costs on mutiple items. Overseas Buyers Note. New Shipping Rates Now Apply. We Ship USPS As Iowest Possible Cost $25.00. We Combine Shipping On Multiple Purchases. BUY IT NOW ALL ITEMS THEN REQUEST TOTAL FROM SELLER. You will receive combined shipping Discount. If your overseas buyer contact us first if you have any questions about shipping costs. Customs forms and payment, etc. E-mail us with any questions. E-mail: justplanetools@yahoo.com Thanks for shopping.
|
|
|
COOPER AIR TOOLS//GARDNER DENVER 1/4" 20° Hi-Lok Nutrunner
Your looking at a Cooper Air Tools/ Gardner Denver 1/4" 20° Hi-Lok Nutrunner. Its a Model# H15NR25G12. Tool speed is 330 RPM. Runs great with zero problems when tested. This tool is in great used condition with only very minor cosmetic wear and one initial marking. Please take a good look at all the pictures as this is the exact item you will be receiving. If you have any questions please feel free to ask. Good Luck and Happy Bidding!
|
|
|
Hi Lok Pliers - 2 Piece - Zephyr & Sandvik Bahco
Hi Lok Pliers- Yellow(Zephyr Model ZPH100) Blue(Sandvik Bahco Model 2979D- 180) Tee th are in good shape* If you p urchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Hi-Shear Hi-lok Ratchet Kit Cleco Roller Ratchet Aircraft Tools
19 Piece Hi-lok Ratchet Tool Kit. Hi-lok Insertion Tool Hi-Shear 1/4" Ratchet Grip Gauge. Hi-lite Go-no-Go Gauges. Box Ratchet 1/4" 5/16" Box Ratchet 7/16" 1/2" Hi-lok Pliers. Cogsdill Burraway Debur Tool.187" Zephyr Microstop 5/16 QC Shaft. Cylindrical Cleco Roller Ratchet. 90 Degree Offset Screw Driver. Hi-lok Screw Puller Pry Bar. Omega 11/32" Hi-lok Socket. 5/16 Basic Socket. Allen Key T-Handles: 3/32" 7/64" 3/16" 5/32" 1/8" Good Used Condition 100% Guaranteed. Book Mark Our Store: http:stores.ebay.com/Just-Plane-Tools?rdc=1 Check out our other Aircraft Tools http:stores.ebay.com/justplanetools Tools are in great working condition. Tools may have normal wear. Chemical stains, paint, etchings. Tool marks etc. Check out our other Aircraft Tools http:stores.ebay.com/justplanetools ... moreWe carry a large selection of Aircraft Tools and accessories for all budgets. We ship worldwide $25.00. Canada $20.00. All items must be paid for within 7 days of auction close. We combine shipping costs on multiple items. We use US Postal Service. International will be approximately $25.00. Contact us if you have any special needs. Posted with
|
|
|
ATI Stubby Hi Lok Roller Ratchet - 7/16" Spindel Socket (qty of 10)
Qty 10 7/16 roller ratchets for hi lok installations
|
|
|
Omega Hi-lok Roller Ratchet 11/32 Socket Reversable Aircraft Tools
Omega Hi-lok Roller Ratchet 11/32" Socket New Condition USA made. 100% GUARANTEED All Tools are in good working condition. Tools may have normal wear. Chemical stains, paint, etchings, Tool marks etc. Check out our other Hi-lok tools and ratchets including Omega. Hi-Shear, Blue Point, General, Continental, Zephyr and more. http:stores.ebay.com/justplanetools We carry a large selection of Hi-lok tool kits and accessories for all budgets. We ship worldwide. We accept Pay Pal and Credit Cards. All items must be paid for within 7 days of auction close. We combine shipping costs on multiple items. Quoted shipping price is for USA. We use US Postal Service. International will be approximately $24.00. If your overseas buyer contact us first if you have any questions about shipping costs. Customs forms and payment, etc. E-mail us with any questions. ... moreThanks for shopping.
|
|
|
Hi Lok Tool Set - 11 Piece
11 Piece Hi Lok Tool Set 2 Hi Lok Pliers- Bacho 2979 U- Zephyr ZPH-100 1 Hi-Shear Hi Lok grip gauge set- 5/32. 3/16, 1/4, 5/16, 3/8 1 Voi Shan Hi Lok Removal Wrench- See pics 2 Hi Lok Sockets- Hi Shear(HLH 102-5) ATI(ATSK 3596-31) 3 Hex Key with holders- See pics 1 Hi Lok Ratchet- 1/4" Drive(Reversible) 1 GBP Grip Gage- For Cherrymax and Cherry Lock Rivets* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Jiffy air tool hi lok installation reversible 7/16 pancake aircraft tool
This reversible pancake installation tool made by the Jiffy Air Tool Co. is a great addition to your tool box. model number 250rd1. easy change forward and reverse knob. set screw on shaft to adjust degree of head. head rotates 360 degrees. also compatible with 7/16 hi lok socket for size changing. works best for installation of hi lok collars on 1/4inch hi loks(BACC30M8 or HL79-8) tested and works wells. please ask all questions before bidding. paypal only.I only ship to the USA and Canada.
|
|
|
Gardner Denver Pneumatic 20° 3/8" Hi-Lok Nutrunner
Gardner Denver Pneumatic 20° 3/8" Hi-Lok Nutrunner Description- Size: C3- Manufacturer: Gardner Denver(now Cooper Tools) Hex Size: 3/8" Non-reversible- Motor Free Speed: 1200 RPM- Length: 16.5" Weight: 6 lbs- This nutrunner has been tested and is in good condition. 6061( JK)7/18/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact ... moreus and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. Internatio
|
|
|
Gardner Denver 1/4" Drive 20° Hi-Lok Nutrunner
Gardner Denver 1/4" Drive 20° Hi-Lok Nutrunner Description- Model: 54857AB6- Manufacturer: Gardner Denver(now Cooper Tools) Drive Size: 1/4" Non-reversible- Motor Free Speed: 200 RPM- Length: 14" Weight: 3 lbs- This nutrunner has been tested and is in good condition. 6054-A( JK)7/17/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact ... moreus and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. Intern
|
|
|
Gardner Denver 1/4" Flat Hi-Lok Nutrunner
Gardner Denver 1/4" Flat Hi-Lok Nutrunner Description- Model: 54833AB6- Manufacturer: Gardner Denver(now Cooper Tools) Hex Size: 1/4" Non-reversible- Motor Free Speed: 200 RPM- Length: 14.5" Weight: 3 lbs- This nutrunner has been tested and is in good condition. 6059( JK)7/17/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and ... morelet us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International
|
|
|
Gardner Denver 5/16" 20° Hi-Lok Nutrunner
Gardner Denver 5/16" 20° Hi-Lok Nutrunner Description- Model: 25NR12P16- Manufacturer: Gardner Denver(now Cooper Tools) Hex Size: 5/16" Non-reversible- Motor Free Speed: 160 RPM- Length: 15" Weight: 4 lbs- This nutrunner has been tested and is in good condition. 6058( JK)7/17/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us ... moreand let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International
|
|
|
Gardner Denver 5/16" Flat Hi-Lok Nutrunner
Gardner Denver 5/16" Flat Hi-Lok Nutrunner Description- Model: 54833AB6- Manufacturer: Gardner Denver(now Cooper Tools) Hex Size: 5/16" Non-reversible- Motor Free Speed: 200 RPM- Length: 14" Weight: 4 lbs- This nutrunner has been tested and is in good condition. 6060( JK)7/17/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and ... morelet us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International
|
|
|
APT 20° 1/4"-28 Threaded Pneumatic Pancake Hi-Lok Nutrunner SRD2
APT 20° 1/4"28 Threaded Pneumatic Pancake Hi-Lok Nutrunner SRD2 Description- Model: SD2- Manufacturer: APT- Free Speed: 650 RPM- Thread Size: 1/4"28- Non-reversible- Overall Length: 13.5" Weight: 5lbs- This nutrunner has been tested and is in good working condition. 6149( JK)8/1/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact ... moreus and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. Internation
|
|
|
APT 20° 5/16" Pneumatic Pancake Hi-Lok Nutrunner SRD1
APT 20° 5/16" Pneumatic Pancake Hi-Lok Nutrunner SRD1 Description- Model: 150 SRD1- Manufacturer: APT- Hex Size: 5/16" Reversible- Motor Free Speed: 150 RPM- Length: 17.5" Weight: 6 lbs- This nutrunner has been tested and is in good condition. 6148( JK)8/1/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your ... morefeelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight and size restr
|
|
|
Gardner-Denver 20 Degree Anglehead 5/16" Hi-Lok Nutrunner
Gardner-Denver 20 ° Anglehead 5/16” Hi-Lok Nutrunner Up for auction is a used Gardner-Denver Hi-Lok Nutrunner. Older model. Size: B2- 20 ° Anglehead- 5/16” hex 1” deep head- 2.000 RPM motor speed- Motor#29762-31- Motor head#31258-23- Anglehead#A-19099-31- Required air pressure 90 psi Condition: Gun has been tested and is in good operating condition. Retaining spring has the tip broken off(see photo) No owner’s marking. Manufacturer’s part numbers. Serial number, and RPM are intact. Light surface rust. Price- Please…consider the Free Shipping in the price of the item! Payment- PayPal Only Please! Payment is expected within 3 days of auction purchase. Shipping- Only ship to 48 states US. Free USPS Shipping! Returns- Returns accepted within 14 days if item was not as described or defective.
|
|
|
APT 7/16" Hi-Lok Offset Nutrunner Drill 35RSAPT-2Q
APT 7/16" Hi-Lok Offset Nutrunner Drill 35RSAPT-2Q Description- Drill Model: 35RSAPT-2Q- Sliding Knob Reverse- Offset Center to to end Length: 4.25" Free Speed: Apprx 350-400 RPM- Offset Thickness: 3/8" Hex Size: 5/16" Overall Length: 12" Weight: 5lbs- Air Consumption: 19 SCFM- These have been tested and are ready for use! 6356( JK)9/6/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. ... moreIf you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has
|
|
|
Jiffy / APT 1/4" Pneumatic Hi-lok Nutrunner Drill
Jiffy/ APT 1/4" Pneumatic Hi-lok Nutrunner Drill Description- Motor Manufacturer: Jiffy/ Ingersoll Rand- Nutrunner Driver: APT- Motor Model: 450 RD1- Hex Size: 1/4" Overall Length: 14" Tested and is in good working condition#6349( JK)9/5/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix ... moreit if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight and size restrictions vary. We wil
|
|
|
Hi-Shear 7/32" Pneumatic Hi-lok Nutrunner Drill
Hi-Shear 7/32" Pneumatic Hi-lok Nutrunner Drill Description- Drill Manufacturer: Ingersoll Rand- Hi-Lok Manufacturer: Hi-Shear- Rated for 20 lbs torque- Hex Size: 7/32" Overall Length: 15" Tested and is in good working condition#6348( JK)9/5/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t ... morefix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight and size restrictions vary. We wi
|
|
|
Hi-Shear 5/16" 150in/lb Pneumatic Hi-lok Nutrunner Drill
Hi-Shear 5/16" Pneumatic Hi-lok Nutrunner Drill Description- Drill Manufacturer: Ingersoll Rand- Hi-Lok Manufacturer: Hi-Shear- Part Number: HLG115-P4- Rated for 150 in/lb- Hex Size: 5/16" Overall Length: 13.5" Tested and is in good working condition#6357-B( JK)9/5/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know ... moreyour feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight and siz
|
|
|
Zephyr hi lok pliers + 1/4 hi lok ratchet.Aircraft tools.
Hi lok pliers in very good condition( no damage on jaws) 1/4 hi lok ratchet + 5/16 mac socket and 1 allen wrench.
|
|
|
Hi-SHEAR Hi-Lok & Hi-Tigue HLK10 Hlkio Collar Removal Tool Kit Aircraft Complete
Item Description: This auction is for a Genuine Hi-SHEAR Hi-Lok& Hi-Tigue HLK10 Hlkio Kit Federal Stock#R5180-143-6196 Aircraft Tool Kit with its original Manual and case that appears to be in Excellent Condition. New this kit sells for $550 to $660. I took lots of pictures so that you can see that these parts have been gently used and are in excellent condition- Please see these pictures as these are part of the description. This will be double boxed to ensure safe delivery. I will gladly combine purchases to save on shipping costs and the purchaser lets me know they are bidding on multiple items. Please wait for me to invoice you for multiple purchases. Canadian Customers- please email me for an accurate shipping quote. Returns are accepted within 14 days as long as they are packaged carefully and returned promptly. All items come from ... morea smoke free home. Please email me if you have any questions. Payment: Buyers are expected to pay within 3 days unless prior arrangements have been made. I do follow the eBay rules and report all non-payers if I am not contacted within 5 days. Sales tax of 7.75% is automatically added for items purchased and shipped to a California address. While PayPal is preferred. Other forms of payments are accepted– please contact me for details Insurance, Shipping. Packaging and Handling I ship within 24 hours and in order to cover the eBay shipping fee. Packaging materials and insurance I charge a nomimal $1 to $2 per shipment which is included in the shipping quote. I also will package these very carefully to ensure safe delivery. For Combined shipping. Please wait for me to invoice you. Flat& Regional Priority Boxes will be used whenever possible and refunds given on the shipping savings. International shipping when offered must be USPS Express Mail International and Insured in order to track the item. THANK YOU FOR LOOKING!
|
|
|
ATI 3/16" Hi-Lok Collar Removal Socket Aircraft Aviation Tools
This auction is for the ATI model ATSK3581. 1/4" drive, size 3/16. This item is used, but in excellent to like new condition. This will make an excellent addition to any toolbox. This item is offered with a money back guarantee. If within 5 days of receiving this item, you find that it is not in the condition described, return it for a full refund, less shipping.
|
|
|
United Air Tool UAT 1000 RPM Hi Lok Runner Ratchet
UAT 5/16 Hi Lok air ratchet. Good condition. Normal usage wear. Posted with
|
|
|
NICE!! APT Deutsch pnuematic hi lok nut runner aircraft auto aviation air tools
You are bidding on a American pneumatic Deutsch Hi-Lok nut runner. This tool has been tested and runs great and performs well. It has wear marks from being in the tool box(see pictures) Model RD1. RPM 450. This tool makes installing Hi-Loks super easy. Good luck and enjoy. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1430e1d91eb-0x107-
|
|
|
Ingersoll Rand Pancake Hi Lok Runner
Ingersoll Rand Pancake Hi Lok Runner- I personally tested this tool and it runs great- 5/16 socket- I do not know the model or RPM because the data plate is missing from the handle. If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
hi lok collar runner heads
2) hi lok collar or nut runner head attachments. One is a United Air Tool 1/4 socket and the other came off of a Jiffy Air Tool 11/32 socket.
|
|
|
Hi-lok Pliers BAHCO 2979 U , aircraft Tools
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 HI-LOK PLIERS BAHCO 2979 U These are used and pliers show signs of use. But are in good working condition. Vinyl handles are in good shape. Jaws show moderate wear.
|
|
|
HI SHEAR HLK22 "HI-LOK" INSTALL KIT W/ COOPER PNEUMATIC DRIVER AND ACCESSORIES
FOR SALE IS A USED HI SHEAR HLK 22 INSTALLATION KIT WITH VARIOUS ACCESSORIES. THIS WAS USED IN AN AVIATION COMPONENT REPAIR SHOP FOR INSTALLATION OF INSERTS AND"HI-LOK" COLLARS IN CFM56 ENGINE CASINGS. IT COMES AS IT IS SHOWN. IT HAD NOT BEEN USED SINCE THE SHOP CLOSED IN 2007. I PUT AIR TO IT AND IT ACTAUTED FINE. THESE ARE VERY EXPENSIVE FROM NEW. HERE IS ONE FOR A DEAL.THERE ARE ALOT OF EXTRA PARTS FOR INSERT INSTALLATION AS YOU CAN SEE IN THE PHOTOS. THE LAST PHOTO SHOWS HOW A"HI-LOK" IS USED. THESE WERE AVALBLE FROM HI SHEAR. BUT NOW FROM LSI THE PNEUMATIC DRIVER FOR THIS IS AN ENHANCED COOPER RATCHET DRIVER. THIS CAN BE USED TO DRIVE MANY THINGS/ADAPTERS. IT HAS A NICE CASE WITH REMOVEABLE TRAY. I HAVE A SIMILAR ONE I HAVE HAD OVER 25 YEARS. I HAVE 3/8 AND 1/2 SOCKET DRIVE ADAPTERS FOR MINE. I LIKE IT WITH THE LONGER ... moreHANDLE INSTEAD OF MY SNAP-ON AIR RATCHET. THANK YOU
|
|
|
Hi-Lok Pliers ZEPHYR ZPH-100 , Aircraft Tool
HI-LOK PLIERS ZEPHYR ZPH-100 These are used and pliers show signs of use. But are in good working condition. Vinyl handles are in good shape. Jaws are in great condition.
|
|
|
Hi-Lok Pliers ZEPHYR ZPH-100 , Aircraft Tool, 2-PAIRS
2-PAIRS HI-LOK PLIERS ZEPHYR ZPH-100 These are used and pliers show signs of use. But are in good working condition. Vinyl handles are in good shape. Jaws are in great condition.
|
|
|
Zephyr hi lok installation and removal kit QCK-4010
One full zephyr lok fast hi lok fastener installation and removal kit. Comes with everything pictured. Works great and is ready to use with an air fitting that comes with it
|
|
|
VOI-SHAN RT100-56S HI-LOK COLLAR REMOVAL WRENCH AIRCRAFT TOOL
VOI-SHAN RT100-56S HI-LOK COLLAR REMOVAL WRENCH AIRCRAFT TOOL VOI-SHAN RT100-56S HI-LOK COLLAR REMOVAL WRENCH. THIS IS A USED TOOL THAT IS IN WORKING CONDITION. THIS IS THE STRAIGHT HANDLE TYPE WRENCHE WITH TEETH FOR REMOVING HI-LOK COLLARS. IT IS USED AND DO SHOW USE WEAR SIGNS. PLEASE LOOK AT THE PICTURES THOROUGHLY BEFORE PLACING A BID. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat rate shipping and have notified us.California residents are subjuct to state tax. We gladly combine shipping.We use usps flat rate mail for the majority of our ... moreshipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page
|
|
|
Omega Hi-Lok Collar Removal Tool REM100-56S AIRCRAFT TOOL
Omega Hi-Lok Collar Removal Tool- Model: REM100-56S- Straight handle This patented Hi-Lok® collar removal tools from Omega Technologies. Can slip easily over any threaded collar(Hi-Lok®. Hi-Lite®, and Eddie-Bolt®) and quickly unscrew without cutting or prying. Made with the highest quality materials. Omega brand collar removal tools are used extensively throughout the aviation industry and are particularly useful for round or damaged collars. The REM Series collar removal tool prevents metal shavings. Broken pieces, and damage to skins or to the adjacent structure. REM 100 Series Hi-Lok® Collar Removal Tool Technical Specifications: Dash Size: 5. 6 Diameter Range: 0.283- 0.335 Width: 0.560 Head Height: 0.350 Handle Length: 5.6' Visit My eBay Store: RedDotTool
|
|
|
HI Lok Collar Buster 3/8" (.375" - .31") - AIRCRAFT TOOL
Hi Lok Collar Buster- Good condition- 401 shank- Opening is 3/8" Reads(A: 375- B: 31) If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-144e65cc59c-0x10a-
|
|
|
Voi-Shan Hi-Lok Removal Tool AR100-8
Voi-Shan Hi-Lok Removal Tool- Model AR100-8- Good used condition* If you p urchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Hi Shear Corporation Hi-lok 1/4" Drive Hlh101-250 Aircraft tool Ratchet
Without mayor scratches or rust. The item has a sand off on the shank. Probably sanding owner's marks as shown in pictures. COMBINE SHIPPING. If you want to buy more of our store items please do so and request an invoice before paying as we combine shipping. QUALITY GUARANTEE: We inspect and test all items that come into our shop. However. We deal with a large variety of items and our knowledge of some items is quite limited. Because of this we offer a 48 hour inspection period on all items that we sell. If you happen to find a problem with your item that we missed, please let us know within 48 hours of delivery. We will repair the item or refund your money if there is a problem that we cannot fix. Good customer service is our only goal. Please let us know immediately if there is a problem with your item. International Buyers– Please ... moreNote: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Please note that we are not related with any of the companies that manufacture the products that we sale therefore if you have any questions regarding our products you can contact us directly. Mycyberoffice.com eBay Store Visit My eBay Store: MyCyberOffice The place for all your tools. Military surplus and much more needs Visit my eBay Store: MyCyberOffice
|
|
|
Hi-Shear Hi Lok Collar Removal Tool HLC1-12
Hi-Shear Hi-Lok Removal Tool- Model HLC1-12- 3/8" Drive- Remover is best suited for aluminum collars. Removes similar collar types- Good used condition* If you p urchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
Omega Hi-Lok Roller Ratcher 1/4" Socket AIRCRAFT TOOL
Omega Hi-Lok Roller Ratchet- 1/4" Spindle socket- Nice condition
|
|
|
Heavy Duty Omega Hi-Lok Roller Ratcher 11/32 AIRCRAFT TOOL
Omega Hi-Lok Roller Ratchet- Model: RR130SP- 11/32 Spindle socket- Nice condition
|
|
|
Voi-Shan Earospace Tools Hi-Lok Removal Tool AR100-8
This listing is for a used Voi-Shan Aerospace Tools Hi-Lok Removal Tool AR100-8 Bost-Broze 1114 6
|
|
|
Zephyr Lok Fast Hi Lok Kit QCK-4000
Zephyr QCK-4000 hi Lok installation removal kit. As shown in photos the retainer spring for Allen key is broken. Easy fix with piano hinge pin. Great condition. There are 2 each sizes of Allen keys as shown in photo. One is broken. I believe it is one of the 5/32. More information can be found by searching zephyr qck-4000. There are a few digital owners manuals out there. If this doesn't sell I am going to keep it and put it in my tool box. Great tool. All removal sockets are there according to the inventory on FSIRIVET.com. Ignore the empty space.
|
|
|
Garden Denver 2000 RPM Hi Lok Runner Ratchet
Garden Denver 5/16 Hi Lok air ratchet. Good condition. Normal usage wear.
|
|
|
Zephyr Lok Fast Pneumatic Aviation Hi Lok High Lock Kit QCK-4000
Zephyr QCK-4000 hi Lok installation and removal kit. Great condition. There are 2 each sizes of Allen keys as shown in photo. One of the 5/64 is broken. More information can be found by searching zephyr qck-4000. There are a few digital owners manuals out there. Great tool. All removal sockets are there according to the inventory on FSIRIVET.com. Ignore the empty space.
|
|
|
Aircraft tool hi lok gages, deburring tools, qc adapters.wrenches.
Assorted aircraft tools in working condition.
|
|
|
Cleco 1/4" Hi-Lok Offset Pneumatic 400 RPM Nutrunner Drill
Cleco 1/4" Hi-Lok Offset Nutrunner Drill 88RSAPT-5CQ Description- Drill Model: 88RSAPT-5CQ- Manufacture: Cleco- Sliding Knob Reverse- Offset Center to to end Length: 2.5" Offset Thickness: 9/16" Free Speed: 400 RPM- Hex Size: 1/4" Torque Limiter: 45-in-lbs- Overall Length: 10" Weight: 4lbs- Air Consumption: 19 SCFM- Please note that the protective sheathing over the attachment may or may not still be intact- These have been tested and are ready for use! 5986-B( JK)7/12/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays ... morewhich are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we r
|
|
|
Cleco 7/16" 90in/lbs Hi-Lok Offset Pneumatic Nutrunner Drill
Cleco 7/16" Hi-Lok Offset Nutrunner Drill 35RSAPT-2Q Description- Drill Model: 35RSAPT-2Q- Manufacture: Cleco- Sliding Knob Reverse- Offset Center to to end Length: 2-7/16" Free Speed: Apprx 350-400 RPM- Offset Thickness: 3/8" Hex Size: 7/16" Torque Limiter: 90 in-lbs- Overall Length: 12" Weight: 4lbs- Air Consumption: 19 SCFM- These have been tested and are ready for use! 5986-A( JK)7/12/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received ... more5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a
|
|
|
4 PC LOT HI-LOK COLLAR REMOVAL TOOL VOL- SHAN AND OMEGA AIRCRAFT TOOL
4 PC LOT HI-LOK COLLAR REMOVAL TOOL VOL- SHAN AND OMEGA AIRCRAFT TOOL 4 PC LOT HI-LOK COLLAR REMOVAL TOOL VOL-SHAN AND OMEGA AIRCRAFT TOOL. NICE SOME OF THEM DONT HAVE A NAME ON, VERY NICE FARLY USED. PLEASE LOOK AT ALL THE PHOTOS BEFORE PLACING BIDS. UNFORTUNATELY DUE TO USPS RAISING THEIR PRICES. WE HAVE HAD TO RAISE SHIPPING. WE DO COMBINE SHIPPING. IF IT FITS IT SHIPS! WE STRONGLY SUGGEST COMBINED SHIPPING ON MULTIPLE ITEMS. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat rate shipping and have notified us.California residents are subjuct ... moreto state tax. We gladly combine shipping.We use usps flat rate mail for the majority of our shipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page
|
|
|
Hi-Lok / Huck Collar Cutter Remover(lot of 2)
Lot of two gently used Hi-lok or Huck collar cutters sizes 3/16" and 1/4" Fits.400" diameter rivet gun to remove Hi-lok or Huck type aluminum collars. Please look at photos carefully and ask any questions before bidding.
|
|
|
Voi-Shan Hi-Lok Removal AR100-6 aircraft tool
voi-Shan Hi-Lok Removal Tool- Model AR100-6- Very Good used condition
|
|
|
AIRCRAFT AVIATION TOOLS HI LOK COLLAR REMOVAL TOOLS, NUT PLATE JIGS,ATTACHMENTS
THIS LOT IS FOR MISCELLANEOUS AIRCRAFT AVIATION AEROSPACE TOOLS. 17 PIECES IN ALL 3 HI LOK COLLAR REMOVAL TOOLS VOI-SHAN RT100-56(2) AVIATION ISSUED RT 100-8S 5 NUT PLATE JIG TOOLS ROUNDED HEAD IS AN HSL 250 DW688-30(2) ONE THAT HAS A NUMBER 281 ON THE BOLT AND ONE THAT IS BOLTED TO THE LEFT. HAS MAF ON IT THE SMALL ATTACHMENT BOLTS HAVE ST2603-2 ON THEM(3) ST 2603-L-2 ST 2603-L-3 ST 2603-L-4(3) HI SHEAR CORP. HLH 128-10
|
|
|
Atlas Copco Hi Lok Installation Style Nutrunner
This is an auction for 1 each Atlas Copco tool only. The tool in this auction is used but in great working condition. Tested with shop air. Motor turns smooth. No other testing was done. Item has cosmetic wear. Missing paint, scratches, and previous owner markings are visible. Please read all the details here before placing a bid and please look closely at all the photos as they are of the exact tool you will be receiving. This item is sold"as is" No returns. No warranties implied or otherwise. Atlas Copco Hi lok installation type tool. 9/32" hex gear in head. Head has PN: ETL1109C06D06SPK etched on it. The gear will accept 9/32" hex shanked sockets(as pictured) Bits, or(with socket removed) 9/32" hex fasteners. Removable Socket part number: 463-9011. Specific application unknown. 300 RPM Motor is a non-reversible ... moretype. Torque range unknown. Unit part number: LBB16 EPX003-U-K Other identifying numbers? No. A636181 14P001-005A.00354717(Apologies for no photos of the part number and such. Not enough contrast to pick up with the camera. Made in Sweden*Head position is adjustable 360 degrees(8 different positions) with quick release collar. Head also appears to have provisions for"bolt on" type accessories such as spring retainers/ allen key holders. Priced to move. Low price for a quality tool. Thanks for checking out this auction. Happy bidding and good luck. O"
|
|
|
(2) Gardner Denver Hi-Lok Pneumatic Nutrunner Ratchets Zero Offset CHRYSLER
The large one has the hex insert with a 3/8" square drive. It's#s are: SIZE 17W40BN180D. 40AG, TOOL SPEED 225. Stamped with the Chrysler Penta. The smaller one's#s are: SIZE FBI. I hooked them up and gave them some oil. And they work. Please check out my other listings. Thanks! SP
|
|
|
Hi-Shear Corp HLA6000-8 Pistol Grip Hi-Lok Collar Driver/Runner Aviation Tool
This Buy It Now offering is for the following: Hi-Shear Corp. 8 Hi-Lok Collar Driver! Mfg. Hi-Shear Corp. Model: HLA6000-8
|
|
|
Cleco kanar Hi-lok gun
Cleco karnar Hi-lok gun 23 in lb
|
|
|
4 PC LOT HI-LOK COLLAR REMOVAL TOOL VOI- SHAN AND OMEGA AIRCRAFT TOOL
4 PC LOT HI-LOK COLLAR REMOVAL TOOL VOI- SHAN AND OMEGA AIRCRAFT TOOL 4 PC LOT HI-LOK COLLAR REMOVAL TOOL VOI-SHAN AND OMEGA AIRCRAFT TOOL. NICE SOME OF THEM DONT HAVE A NAME ON, VERY NICE FARLY USED. PLEASE LOOK AT ALL THE PHOTOS BEFORE PLACING BIDS. UNFORTUNATELY DUE TO USPS RAISING THEIR PRICES. WE HAVE HAD TO RAISE SHIPPING. WE DO COMBINE SHIPPING. IF IT FITS IT SHIPS! WE STRONGLY SUGGEST COMBINED SHIPPING ON MULTIPLE ITEMS. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat rate shipping and have notified us.California residents are subjuct ... moreto state tax. We gladly combine shipping.We use usps flat rate mail for the majority of our shipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-148154569e1-0xf9-
|
|
|
Gardner Denver 9/16" 20° Hi-Lok Nutrunner
up for sale is an a used gardner denver us made 9/16" hi-lok nut runner model# 54527AA7 item has scratches.Marks,etc etc but works what you see in pictures is what you will get thank you for looking and good luck
|
|
|
6 Piece Hi-Lok Collar Cutter Knocker Set ---------- 4-3-1
Hi Lok Collar Knocker Set- 6 piece- 401 shank- Sizes: 1/8. 5/32, 3/16, 1/4, 5/16, 3/8- I have many of these and will assemble your set personally. Most are in barely used to new condition* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund. If purchasing several different items I will combine shipping. 1. Please use the"Add To Cart" feature. 2. When done shopping press the"Request total from seller" button. Located above the first item in your cart. 3. I will then send you an invoice with the appropriate shipping amount.
|
|
|
4 Piece Hi-Lok Collar Cutter Knocker Set 1/8, 5/32, 3/16, 1/4 .......... (1-4-1)
Hi Lok Collar Knocker Set- Good condition- 401 shank- Sizes: 1/8. 5/32, 3/16, 1/4- I have many of these and will assemble your set personally. Most are in barely used to new condition* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund. If purchasing several different items I will combine shipping. 1. Please use the"Add To Cart" feature. 2. When done shopping press the"Request total from seller" button. Located above the first item in your cart. 3. I will then send you an invoice with the appropriate shipping amount.
|
|
|
Gardner Denver 7/16 Hi Lok Runner Nut Runner Aircraft Tool
Gardner Denver Hi Lok Runner- This tool is an industrial quality tool and is in great condition. Model: H16NR25A12- 300 RPM- 7/16" drive- Runs perfectly* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. Combined Shipping- If purchasing several different items I will combine shipping. 1. Please use the"Add To Cart" feature. 2. When done shopping press the"Request total from seller" button. Located above the first item in your cart. 3. I will then send you an invoice with the appropriate shipping amount.
|
|
|
11/32 hi lok high lock driver 45 degree hi shear
Hi Shear 45 degree 11/32 Hi Lok driver. Good condition. Allen key is in decent shape.
|
|
|
HI-LOK COLLAR REMOVAL TOOL VOI SHAN & OTHER AIRCRAFT TOOL 3 PIECE LOT
HI-LOK COLLAR REMOVAL TOOL VOI-SHAN AND OTHER AIRCRAFT TOOL VERY NICE. ONE HAS NO NAME ON IT THAT WERE BARLEY USED MODEL NUMBERS: RT100-56. RT100-8S, RT100-1012{PLEASE SEE PHOTOS FOR BETTER DETAILS} We want Positive feedback* We want our customers 100% satisfied* We are trying to achieve FIVE STARS in all areas of customer satisfaction. We are committed to satisfaction of your purchase. If you are not satisfied with your purchase for any reason. PLEASE give us an opportunity to make it right before leaving feedback. PLEASE READ THE FOLLOWING BEFORE BUYING} DESCRIPTION: WE DO OUR BEST TO DESCRIBE EACH ITEM ACCURATELY: Often we provide additional detailed pictures. Which provide visual detail of our descriptions, showing everything included in the listing(i.e. manual, etc. It is the responsibility of the buyer to thoroughly read the description ... moreand to Look at all the Pictures. If something is not listed and/or not shown in the photos, it is not included. To the best of our ability. We provide in the description the operation, condition and functionality of the listed item. We ask that buyers accept the responsibility of their purchase. We NEVER want to mislead anyone with our descriptions. IF THERE ARE ANY QUESTIONS AT ALL. WE WOULD HOPE YOU WOULD ASK THEM BEFORE BUYING} We Welcome any and all questions and will try to RESPOND CLEARLY AND PROMPTLY. We want our buyers to be educated and HAPPY with their purchase(s) ACCEPTED PAYMENT METHODS: PAYMENT MUST BE MADE WITHIN FIVE(5) DAYS OF END OF SALE. PAYPAL PREFERRED TO CUSTOMERS WITH CONFIRMED ADDRESSES ONLY. PAYMENT BY: Pay Pal ONLY PLEASE LOOK AT THE PICTURES THOROUGHLY BEFORE BUYING!
|
|
|
Jiffy Hi Lok Nutrunner United Air Tool Aviation
Great condition. Runs perfect. 7/16 hex head. Huge time saver when running down hiloks.
|
|
|
APT Pneumatic 9/32" Hi Lok Pancake Nutrunner Aircraft Tool
This tool works great. It will install 9/32" Hi Lok collars. It is made in the USA by APT. It has a 7" long reach and the foot is 3" The allen key is built into the foot piece.
|
|