|
ZEPHYR ZT706 SERIES HEAVY DUTY PNEUMATIC RIVET SHAVER AIRCRAFT TOOLS
ZEPHYR ZT706 SERIES HEAVY DUTY PNEUMATIC RIVET SHAVER-RIVET SHAVER MOTOR RUNS GREAT-COMES AS PICTURED WITHOUT CUTTER AND SKIRT-ZEPHYR MODEL ZT706-RPM: 15.000-MADE IN THE USA! THESE SELL FOR $1100 NEW! GREAT BUY!
|
|
|
Rockwell 5000 RPM Pneumatic Drill Quick Change Chuck Aircraft Tools Air Drill
Rockwell 5000 RPM Drill Motor With 1 Year Warranty 5000 rpm Includes Magnavon Quick Change Chuck Use with Aerospace Industry Quick Change Drill Bits Can also be used with any standard 3/8"24 jaw type threaded chuck 1 year warranty against defects Rated at 90 PSI Tested for proper operation These motors are still good for years of excellent service Surplussed from a working environment in a major aircraft manufacturer. Drills may have markings. Condition of paint if any will vary. Rockwell Model 31D101 5000 RPM drill motor has been thoroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. See my for drill bits for these motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before ... morepaying. Quick Reference Guide to Store Categories. Click Title to go to Category
|
|
|
Rockwell 725 RPM Pneumatic Drill 1/2" Chuck Aircraft Tools Air Drill
Rockwell 725 RPM Drill Motor With 1 Year Warranty 725 rpm Includes 1/2" Key Chuck Can also be used with any standard 1/2"20 jaw type threaded chuck 1 year warranty against defects Rated at 90 PSI Tested for proper operation Chuck Key Included These motors are still good for years of excellent service Surplussed from a working environment in a major aircraft manufacturer. Drills may have markings. Condition of paint if any will vary. Rockwell Model 41D106 725 RPM drill motor has been thoroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. See my for drill bits for these motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. Quick Reference Guide to Store Categories. ... moreClick Title to go to Category
|
|
|
DESOUTTER / CHICAGO PNEUMATIC CP4444-RUSAB 3X AIR RIVET GUN KIT AIRCRAFT TOOLS
DESOUTTER/ CHICAGO PNEUMATIC CP4444-RUSAB 3X AIR RIVET GUN KIT-RIVET GUN KIT INCLUDES THE FOLLOWING: DESOUTTER/ CHICAGO PNEUMATIC MODEL CP4444-RUSAB PNEUMATIC RIVET GUN-MADE BY DESOUTTER BUT IT IS THE SAME AS THE CHICAGO PNEUMATIC MODEL-SIZE: 3X-0.401 SHANK SETS-RIVET GUN HAS AN ENGRAVING-INCLUDES A SNAP ON PH200D QUICK DISCONNECT SET HOLDER-COMES WITH PICTURED SETS! COMES EXACTLY AS PICTURED! TESTED AND WORKS GOOD! THESE SELL NEW FOR OVER $700.00! GREAT BUY!
|
|
|
Master Power Cooper Tools Pneumatic Panel Saw. Aircraft Aviation Sheet Metal.
This is a like new saw. It's lightly used. What you see pictured is what's included. Thanks. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13e1085002f-0xfa-
|
|
|
CHICAGO PNEUMATIC CP-717 AIR ZIP GUN 0.498 FOR REPAIR OR PARTS AIRCRAFT TOOLS
CHICAGO PNEUMATIC CP-717 AIR ZIP GUN 0.498 FOR REPAIR-THIS RIVET GUN IS BEING SOLD FOR PARTS AND/ OR REPAIR-THE HANDLE HOUSING IS CRACKED AS IS THE BARRELL ALSO(see pics) MISSING THE BARRELL COVER-AIR FITTING CONNECTIONS ARE ALSO MISSING-WE DO NOT KNOW IF ANYTHING ELSE IS MISSING-UNKNOWN WORKING CONDITION-SELLING FOR REPAIR AND/ OR PARTS! CHICAGO PNEUMATIC CP-717 AIR ZIP GUN-USES 0.498 RIVET SETS-COMES EXACTLY AS PICTURED! SELLING"AS IS" FOR REPAIR OR PARTS! NO RETURNS ON THIS ITEM GREAT BUY! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13e2ca183be-0xfb-
|
|
|
SIMONDS SP-0042 PNEUMATIC SQUEEZE PLIERS AIRCRAFT TOOLS
SIMONDS SP-0042 PNEUMATIC SQUEEZE PLIERS-USED SURPLUS-CLOSES AND OPENS WHEN HOOKED UP TO AIR. NOT TESTED ANY FURTHER-SIMONDS MODEL SP-0042-WEIGHT: 2.80 LBS-HAS AN ENGRAVING AND SOME SMALL GRIND MARKS-GRIND MARKS ARE COSMETIC. ETCHED NUMBERS WERE REMOVED-COMES EXACTLY AS PICTURED! SEE ALL PICS! GREAT FIND!
|
|
|
STANLEY PNEUMATIC 1/4" 2200 RPM SCREW GUN / DRIVER AIRCRAFT TOOLS
STANLEY PNEUMATIC 1/4" 2200 RPM SCREW GUN/ DRIVER-THIS SCREW GUN/ DRIVER IS USED IN GOOD CONDITION AND WORKS GREAT! SIZE: 1/4" HEX-RPM: 2200-NON-REVERSIBLE-WEIGHT: 2.35 LBS-MADE BY STANLEY IN THE USA! COMES EXACTLY AS PICTURED! SEE ALL PICS! GREAT BUY!
|
|
|
STANLEY PNEUMATIC 1/4" 800 RPM REVERSIBLE SCREW GUN / DRIVER AIRCRAFT TOOLS
STANLEY PNEUMATIC 1/4" 800 RPM REVERSIBLE SCREW GUN/ DRIVER-THIS SCREW GUN/ DRIVER IS USED IN GOOD CONDITION AND WORKS GREAT! STANLEY MODEL A32PRCT-8-SIZE: 1/4" HEX-RPM: 800-REVERSIBLE-MADE BY STANLEY IN THE USA! COMES EXACTLY AS PICTURED! SEE ALL PICS! GREAT BUY!
|
|
|
ARO Pneumatic Screw Gun - Aircraft Tools
Used ARO Pneumatic Screw Gun. 900 RPM. Has forward and reverse switch. With an adjustable torque setting. In great working condition.
|
|
|
BOSTON PNEUMATIC SIZE # 4 AIR TOOL AIRCRAFT TOOLS
BOSTON PNEUMATIC SIZE# 4 AIR TOOL-THIS AIR DRILL IS SURPLUS FROM THE US MILITARY! SPINS WHEN TRIGGER IS PRESSED. NOT TESTED ANY FURTHER-MADE BY BOSTON PNEUMATICS-SIZE: 4-WEIGHT: 3.65 LBS-UNSURE AS TO WHAT APPLICATION THIS DRILL IS FOR-HAS SOME GRIND MARKS WHERE MILITERY ENGRAVINGS WERE REMOVED-COMES EXACTLY AS PICTURED! GREAT FIND!
|
|
|
ARO STRAIGHT PNEUMATIC 3" PANCAKE DRILL (PANCAKE IS DAMAGED) AIRCRAFT TOOLS
ARO STRAIGHT PNEUMATIC 3" PANCAKE DRILL(PANCAKE IS DAMAGED) PANCAKE PORTION OF DRILL IS DAMAGED! SEE PICS! MOTOR RUNS GOOD! MADE BY ARO TOOLS IN THE USA! 3" PANCAKE-WEIGHT: 2.95 LBS-COMES EXACTLY AS PICTURED! SELLING"AS IS" GREAT FIND!
|
|
|
INGERSOLL RAND 7AN4 PNEUMATIC 7/16" HEX SCREW GUN / DRIVER AIRCRAFT TOOLS
INGERSOLL RAND 7AN4 PNEUMATIC 7/16" HEX SCREW GUN/ DRIVER-THIS SCREW GUN/ DRIVER IS USED IN GOOD CONDITION AND WORKS GREAT! INGERSOLL RAND MODEL 7AN4-SIZE: 7/16" HEX-RPM: 900-DRIVE AREA IS IN VERY GOOD CONDITION! MADE BY INGERSOLL RAND IN THE USA! HAS AN ENGRAVING-COMES EXACTLY AS PICTURED! SEE ALL PICS! GREAT BUY! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e6c002c67-0x101-
|
|
|
CLECO 35RSATP-10Q PNEUMATIC PISTOL GRIP 1/4" REV SCREWDRIVER AIRCRAFT TOOLS
CLECO 35RSATP-10Q PNEUMATIC PISTOL GRIP 1/4" REV SCREWDRIVER-THIS CLECO AIR SCREWDRIVER IS USED IN GOOD CONDITION! SEE PICS! CLECO MODEL 35RSATP-10Q-SIZE: 1/4" HEX-RPM: 750-REVERSIBLE-WEIGHT: 3.35 LBS-COMES EXACTLY AS PICTURED! THESE RETAIL NEW FOR OVER $1.200.00! GREAT FIND!
|
|
|
AIRCRAFT TOOLS, INC SHAVER RIVET HEAD PNEUMATIC PORTABLE AT429CR w/ BITS & CASE
Up for auction is a AIRCRAFT TOOLS. INC SHAVER RIVET HEAD PNEUMATIC PORTABLE AT429CR w/ BITS& CASE. I connected this to my air compressor and it works fine. There are 10 bits included and the 3/8" is currently on the unit. The others are 5/16; 7/16; 1/2; 9/16; 5/8; 3/4; 7/8; 1; 1 1/8. There is another piece in the case but I'm not sure what it is so please view photos. It does show signs of use and there are some numbers that have been engraved on it. The case is pretty beat up but functions as it should; latch is solid. Please ask any questions before bidding and good luck!
|
|
|
APT 5" OFFSET REVERSIBLE PNEUMATIC THREADED PANCAKE DRILL AIRCRAFT TOOLS
APT 5" OFFSET REVERSIBLE PNEUMATIC THREADED PANCAKE DRILL-PANCAKE PORTION OF THIS DRILL IS MISSING! MOTOR RUNS GREAT IN FOWARD AND REVERSE-MISSING FOWARD/ REVERSE PLASTIC KNOB-MADE BY APT- AMERICAN PNEUMATIC TOOL-MODEL SRD1-RPM: 1000-ACCEPTS INDUSTRY STANDARD 1/4 X 28 THREADED DRILL BITS WITH A REPAIRED PANCAKE-PANCAKE HEAD IS 5" LONG-WEIGHT: 3 LBS-HAS AN ENGRAVING-MADE IN THE USA! COMES EXACTLY AS PICTURED! SEE ALL PICS! GREAT BUY! 36`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*70%60%3E36%60-13e81a65f98-0xf4-
|
|
|
aircraft air tools APT Hammer drill rivet aviation pneumatic - No Reserve
APT Air Hammer We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant Service ... moreMillwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
aircraft air tools ROCKWELL 6500 rpm 90 degree drill aviation pneumatic
Rockwell 6500 rpm 90 degree air Drill We hooked up up to this drill everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs ... moreIndustrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
ATLAS COPCO 2300 RPM REV 1/4" HEX DRIVE PNEUMATIC SCREW GUN AIRCRAFT TOOLS
ATLAS COPCO 2300 RPM REV 1/4" HEX DRIVE PNEUMATIC SCREW GUN-THIS PNEUMATIC SCREW GUN/ DRIVER IS USED IN GOOD CONDITION AND WORKS GREAT! ATLAS COPCO MODEL# LUM 21HR 23-U-REVERSIBLE-RPM: 2300-SIZE: 1/4" HEX-0.5-2.5 NM-TOP OF THE LINE AIR TOOL MADE IN SWEDEN! COMES EXACTLY AS PICTURED! GREAT BUY!
|
|
|
STANLEY PNEUMATIC ITALY 1/4" REVERSIBLE SCREW GUN / DRIVER AIRCRAFT TOOLS
STANLEY PNEUMATIC ITALY 1/4" REVERSIBLE SCREW GUN/ DRIVER-STANLEY PNEUMATIC SCREW GUN/ DRIVER-TOP OF THE LINE MADE IN ITALY-MODEL A3PRT15-5-SIZE: 1/4" HEX-REVERSIBLE-RPM: 1500-WEIGHT: WEIGHS ONLY 2.70 LBS-MOTOR RUNS GOOD-COMES EXACTLY AS PICTURED GREAT FIND!
|
|
|
ARO PNEUMATIC 1/4" REVERSIBLE 1500 RPM AIR SCREW GUN / DRIVER AIRCRAFT TOOLS
ARO PNEUMATIC 1/4" REVERSIBLE 1500 RPM AIR SCREW GUN/ DRIVER AIRCRAFT TOOLS AG028A-15 41457L 90 1500RPM
|
|
|
SMALL STANLEY PNEUMATIC 1/4" REV SCREW GUN / DRIVER RPM 2100 AIRCRAFT TOOLS
SMALL STANLEY PNEUMATIC 1/4" REV SCREW GUN/ DRIVER RPM 2100-STANLEY PNEUMATIC SCREW GUN/ DRIVER-SIZE: 1/4" HEX-REVERSIBLE-RPM: 2100-LENGTH: ONLY 6" WEIGHT: WEIGHS ONLY 2.35 LBS-ENGRAVED-MOTOR RUNS GOOD-COMES EXACTLY AS PICTURED GREAT FIND!
|
|
|
ATLAS COPCO LIGHTWEIGHT LUM12 SR11-U PNEUMATIC 5" PANCAKE DRILL AIRCRAFT TOOLS
ATLAS COPCO LUM12 SR11-U AIR PANCAKE DRILL W/ OUT PANCAKE HEAD-THIS PANCAKE DRILL NEEDS REPAIR. DOES NOT WORK! IT IS MISSING THE PANCAKE HEAD AND IT DOES NOT SPIN WHEN CONNECTED TO AIR-UNSURE AS TO WHY IT DOES NOT SPIN. IT MAYBE A SIMPLE FIX OR NOT-ATLAS COPCO MODEL LUM12 SR11-U-REVERSIBLE-LIGHTWEIGHT AT ONLY 1 POUND! ATLAS COPCO ARE TOP OF THE LINE AIR TOOLS FOR THE AIRCRAFT/ AVIATION INDUSTRY-COMES EXACTLY AS PICTURED! SELLING"AS IS" NO RETURNS GREAT FIND!
|
|
|
ATLAS COPCO 1-1/2" PNEUMATIC HEX SQUARE DRIVE PANCAKE AIR DRILL AIRCRAFT TOOLS
ATLAS COPCO 1-1/2" PNEUMATIC HEX SQUARE DRIVE PANCAKE AIR DRILL-THIS PANCAKE DRILL'S MOTOR RUNS GREAT BUT THE PANCAKE HEAD COMES LOOSE IN PIECES! WE HAVE NO KNOWLEDGE ON HOW TO PUT IT BACK TOGETHER OR IF ALL THE PARTS ARE THERE IN WORKING CONDITION! THE ATLAS COPCO PISTOL GRIP MOTOR CAN ALSO BE USED AS A SCREWDRIVER WITH THE RIGHT HEAD APPLICATION-ATLAS COPCO MODEL LUD 22 HR12-RPM: 750-REVERSIBLE-TOP OF THE LINE AIR TOOLS MADE IN SWEDEN-PANCAKE HEAD IS 1-1/2" SMALL AND LIGHT WEIGHT PISTOL GRIP AIR TOOL THAT WEIGHS UNDER 2 POUNDS! COMES EXACTLY AS PICTURED! SEE ALL PICS! SELLING"AS IS" NO RETURNS ON THIS ITEM PLEASE GREAT BUY!
|
|
|
CHICAGO PNEUMATIC 3/4" DRIVE PNEUMATIC NUTRUNNER FOR REPAIR AIRCRAFT TOOLS
CHICAGO PNEUMATIC 3/4" DRIVE PNEUMATIC NUTRUNNER FOR REPAIR-THIS NUTRUNNERS MOTOR WORKS AND RUNS GOOD BUT THE HEAD NEEDS REPAIR! THE HEAD IS LOOSE AND COMES OFF(see pics) UNSURE IF THE HEAD IS MISSING ANY PARTS(comes exactly as pictured) MADE BY CHICAGO PNEUMATIC IN THE USA! DRIVE: 3/4" WEIGHT: 2.35 LBS-SELLING"AS IS" FOR REPAIR AND/ OR PARTS! COMES EXACTLY AS PICTURED! SEE ALL PICTURES! NO RETURNS ON THIS ITEM PLEASE GREAT FIND!
|
|
|
CHERRY G87D PNEUMATIC LOCKBOLT POWER RIVETER AIRCRAFT TOOLS
CHERRY G87D PNEUMATIC LOCKBOLT POWER RIVETER- CHERRY MODEL G87D LOCKBOLT POWER RIVETER-THIS RIVETER WAS TESTED WITH AIR AND SEEMS TO BE FUNCTIONING CORRECTLY-ALTHOUGH WE DO NOT HAVE ANY ACCESS TO TEST THIS RIVETER WITH ANY LOCKBOLTS. BLIND BOLTS OR RIVETS-NSN: 5130-00-760-1360-HERE IS A LINK TO THE MANUFACTURERS WEBSITE FOR TECHNICAL DETAILS AND SPECIFICATIONS: http:www.cherryaerospace.com/files/pdf/catalog/CA-1001.pdf-RIVETER HAS A COUPLE OF ENGRAVINGS ON IT-THESE RIVETERS COST NEW OVER $3.000! 14 DAY RETURN POLICY ON THIS ITEM IF NOT SATISFIED WITH ITS PERFORMANCE-COMES EXACTLY AS PICTURED GREAT BUY!
|
|
|
Dotco 600 RPM Pneumatic Drill W/QC Chuck Aircraft Tools
Reconditioned Dotco 600 RPM Air Drill Motor Model 15C1489A Very nice Palm Drill*Includes Magnavon Quick Change Chuck* Use with Aerospace Industry Quick Change Drill Bits* Can also be used with any standard 3/8"24 chucks* See my for drill bits for these motors. These motors are still good for years of excellent service* Reconditioned Dotco Model 15C1489A 600 RPM drill motor has been thouroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. Quick Reference Guide to Store Categories. Click Title to go to Category
|
|
|
HI-SHEAR HLAI062-6 PNEUMATIC STRAIGHT DRIVER ASSEMBLY AIRCRAFT TOOLS
HI-SHEAR HLAI062-6 PNEUMATIC STRAIGHT DRIVER ASSEMBLY-THIS PNEUMATIC DRIVER'S MOTOR RUNS GREAT BUT THE TIP IS LOOSE AND WOBBLES WHEN IN USE-HI-SHEAR MODEL HLAI062-6 STRAIGHT DRIVER ASSEMBLY-WEIGHT: 4 LBS-TOOL IS ENGRAVED-COMES EXACTLY AS PICTURED! GREAT FIND!
|
|
|
BOEING PNEUMATIC AIR DRILL GUN, ROCKWELL 5000 RPM AIRCRAFT TOOLS, INDUSTRIAL
BOEING PNEUMATIC AIR DRILL GUN. ROCKWELL 5000 RPM AIRCRAFT TOOLS, INDUSTRIAL Rockwell 5000 RPM PNEUMATIC Drill MARKINGS on top of drill Rockwell Model 31D101 5000 RP M. TP25, markings at the tip of drill: JACOBS CHUCK THD 3/8- 27 BA0-1/4in0- 6.5 mm This is a typical picture. Your drill may look slightly different. These tools are used but in good working condition. THE ITEM YOU WILL RECEIVE IS THE EXACT ONE ON THE PICTURES Tools may have normal wear. Chemical stains, paint, etchings, tool marks etc. I carry a large selection of Aircraft Tools and accessories. I ship worldwide. INTERNATIONAL ORDERS WELCOME PAYMENT IN U.S. FUNDS ONLY! ATTENTION INTERNATIONAL BUYERS: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING CHARGES. THESE CHARGES ARE THE BUYERS RESPONSIBILITY THEY ARE OUT OF MY CONTROL AND DICTATED BY YOUR ... moreCOUNTRY. PLEASE CHECK WITH YOUR COUNTRY CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING/ BUYING. I DO COMBINE SHIPPING TO SAVE COST ON POSTING. I live in Canada. If you live in the USA, your item must go through Security at the border, sometimes there is a backlog, Unfortunately I have no control over this event. Please take this information into consideration when bidding on my auctions. Thank you! Any questions re: shipping and handling or about the item please feel free to email me. I do my best to accurately describe each piece I put up for auction. I've done a bit of research. But I am by no means an expert. If there is something I may have missed or you would like to see more pictures please e-mail me. I will be happy to answer any questions you have about this piece. If there are any problems after item is received, I will do my best to work with you to resolve! Check out my! Be sure to add me to your!
|
|
|
BOEING, PNEUMATIC DEUTSCH OFF SET NUTRUNNER DRILL AIRCRAFT TOOLS, INDUSTRIAL
BOEING. PNEUMATIC DEUTSCH OFF SET NUTRUNNER DRILL AIRCRAFT TOOLS, INDUSTRIAL APT Deutsch Offset Nutrunner Drill RD1 Description- Model: RD1- Manufacture: APT Deutsch- Free Speed: 1000 RPM- Overall Length: 11.5" SERIAL# 7277- These have been tested and are in good working condition. This is a typical picture. These tools are used but in good working condition. Tools may have normal wear. Chemical stains, paint, etchings, tool marks etc. I carry a large selection of Aircraft Tools and accessories. I ship worldwide. AT THE MOMENT I AM SELLING ALL MY HUSBAN DS TOOLS DU E TO ILLNESS. THEY ARE ALL TESTED AND IN WO RKING CONDITION. INTERNATIONAL ORDERS WELCOME PAYMENT IN U.S. FUNDS ONLY! ATTENTION INTERNATIONAL BUYERS: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING CHARGES. THESE CHARGES ARE THE BUYERS RESPONSIBILITY ... moreTHEY ARE OUT OF MY CONTROL AND DICTATED BY YOUR COUNTRY. PLEASE CHECK WITH YOUR COUNTRY CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING/ BUYING. I DO COMBINE SHIPPING TO SAVE COST ON POSTING. I live in Canada. If you live in the USA, your item must go through Security at the border, sometimes there is a backlog, Unfortunately I have no control over this event. Please take this information into consideration when bidding on my auctions. Thank you! Any questions re: shipping and handling or about the item please feel free to email me. I do my best to accurately describe each piece I put up for auction. I've done a bit of research. But I am by no means an expert. If there is something I may have missed or you would like to see more pictures please e-mail me. I will be happy to answer any questions you have about this piece. If there are any problems after item is received, I will do my best to work with you to resolve! Check out my! Be sure to add me to your!
|
|
|
S38 DEUTSCH aircraft air tools Hammer drill rivet aviation pneumatic
S38 DEUTSCH We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant Service Millwrights- ... moreRiggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
Dotco Magnavon Aircraft Tools 600 RPM Pneumatic Drill
Mini" Dotco High Torque Pneumatic Drill Model: 15C1489X38 Serial: 581280 600 RPM Magnavon 1365A Quick Chuck Top of the line Dotco equipped with the Boeing-style chuck. External exhaust deflector/silencer and polycarbonate vanes, which have a much longer life and won't crack like the original carbon fiber vanes. It has been disassembled, cleaned and reassembled with serviceable parts. I thoroughly test all the tools I sell in an aviation maintenance environment so you can be sure they're ready for the job. I will combine shipping charges for multiple sales of any tools I have listed on eBay. You only pay for the heaviest item and I'll pay for the rest. I will refund the sale price if the item is retuned within 30 days. I will include 10ea. 20 jobber length bits with each drill sold. Contact me if you have any questions and ... morethanks for checking them out!
|
|
|
Dotco Magnavon Aircraft Tools 6200 RPM Pneumatic Drill
Dotco High Speed Pneumatic Drill Model: 15C2987 6200 RPM Magnavon 1365A Quick Chuck I have 5 of these drills available. All are equipped with the Boeing-style chuck and adjustable triggers. They have been disassembled. Cleaned and reassembled with serviceable parts. I thoroughly test all the tools I sell in an aviation maintenance environment so you can be sure they're ready for the job. I will combine shipping charges for multiple sales of any tools I have listed on eBay. You only pay for the heaviest item and I'll pay for the rest. I will refund the sale price if the item is retuned within 30 days. I will include 10ea. 20 jobber length bits with each drill sold. Contact me if you have any questions and thanks for checking them out!
|
|
|
ARO 950 RPM Pneumatic Drill 3/8 Chuck Aircraft Tools Air Drill
ARO 950 RPM Drill Motor With 1 Year Warranty 950 rpm Includes 3/8" Key Chuck Can also be used with any standard 3/8"24 jaw type threaded chuck 1 year warranty against defects Rated at 90 PSI Tested for proper operation These motors are still good for years of excellent service Surplussed from a working environment in a major aircraft manufacturer. Drills may have markings. Condition of paint if any will vary. ARO Model 8428-6 950 RPM drill motor has been thoroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. See my for drill bits for these motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. Quick Reference Guide to Store Categories. Click Title to go ... moreto Category di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13f06fa4744-0xf2-
|
|
|
Rockwell 500 RPM Pneumatic Drill 1/2" Chuck Aircraft Tools Air Drill
Rockwell 500 RPM Drill Motor With 1 Year Warranty 500 rpm Includes 1/2" Key Chuck Can also be used with any standard 1/2"20 jaw type threaded chuck 1 year warranty against defects Rated at 90 PSI Tested for proper operation Chuck Key Included These motors are still good for years of excellent service Surplussed from a working environment in a major aircraft manufacturer. Drills may have markings. Condition of paint if any will vary. Rockwell Model 41D107 500 RPM drill motor has been thoroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. See my for drill bits for these motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. Quick Reference Guide to Store Categories. ... moreClick Title to go to Category.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f06fa47b4-0x107-
|
|
|
Rockwell 750 RPM Pneumatic Drill 3/8 Chuck Aircraft Tools Air Drill
Rockwell 750 RPM Drill Motor With 1 Year Warranty 750 rpm Includes 3/8" Key Chuck Can also be used with any standard 3/8"24 jaw type threaded chuck 1 year warranty against defects Rated at 90 PSI Tested for proper operation Chuck Key Included These motors are still good for years of excellent service Surplussed from a working environment in a major aircraft manufacturer. Drills may have markings. Condition of paint if any will vary. Rockwell Model 31D106 750 RPM drill motor has been thoroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. See my for drill bits for these motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. Quick Reference Guide to Store Categories. ... moreClick Title to go to Category
|
|
|
STANLEY PNEUMATIC A30LA-20F2 NUTRUNNER 3/8" RPM 1200 AIRCRAFT TOOLS
STANLEY PNEUMATIC A30LA-20F2 NUTRUNNER 3/8" RPM 1200-STANLEY PNEUMATIC MODEL A30LA-20F2-DRIVE: 3/8" COMES WITH A A-3033 HEAD-RPM: 1200-WEIGHT: 2.75 LBS-MOTOR RUNS GOOD-COMES EXACTLY AS PICTURED GREAT FIND!
|
|
|
Chicago Pneumatic Rivet Gun - CP4444-RUSAB - With Rivet sets - Aircraft Tools
Chicago Pneumatic Rivet Gun- CP4444-RUSAB- Trigger is AMAZING- Superb speed control- Comes with rivet sets shown- Some are new. Some are unused surplus, some are used. If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
|
STANLEY PNEUMATIC A30LATA-16P1 NUTRUNNER 3/8" RPM 1375 AIRCRAFT TOOLS
STANLEY PNEUMATIC A30LATA-16P1 NUTRUNNER 3/8" RPM 1375-STANLEY PNEUMATIC MODEL A30LATA-16P1-DRIVE: 3/8" COMES WITH A A-3053 HEAD-RPM: 1375-WEIGHT: 2.10 LBS-MOTOR RUNS GOOD-COMES EXACTLY AS PICTURED GREAT FIND!
|
|
|
Miscellaneous Pneumatic Aircraft Tools From Cessna Aircraft
This is a large lot of miscellaneous pneumatic aircraft tools from The Cessna Aircraft Company. I do not know the actual weight of these tools but if I had to guess it would be 500+. These tools are UNTESTED! From what I see there a lot of complete tools but also some incomplete tools that are missing pieces parts.
|
|
|
Sioux 1453 Pneumatic Drill, 1/4" Chuck, 5,000 RPM. Aircraft Tools
Used Sioux Pneumatic Drill. 1/4" Chuck, 5,000 RPM. These drills are in great working condition, they turns straight. These are very nice small drills. Made in USA. Some of the paint has worn off. No chuck key is included. Shipping to the USA only. Thank you for looking at this auction. Posted with
|
|
|
Tool Development Mfg TD-300 B Pneumatic Rivet Shaver Aircraft Aviation Tools
This auction is for a Tool Development Mfg. model TD-300 B pneumatic rivet shaver. This item is used. But in excellent working condition. Description- Model: TD-300 B- Free Speed: Estimated 20.000 RPM- Skirt Accepts up to 7/16" Shaver- Air Inlet: 1/4" This item is offered with a money back guarantee. If within 5 days of receiving this item. You find that it is not in the condition described, return it for a full refund, less shipping. e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13f5cec7161-0xe1-
|
|
|
Aircraft Assortment Pneumatic tools
PNEUMATIC AIRCRAFT TOOL ASSORTMENT ALL SHOWN INCLUDED IN ASSORTMENT Items are used Any Questions. Please call Steve at 316-761-2382
|
|
|
Zephyr ZT 507C Heavy Duty Dual Rotation Pneumatic Rivet Shaver-Aircraft Tools
Used Zephyr ZT 507C Heavy duty Dual Rotation Pneumatic Rivet Shaver. These tools are in very nice condition. They work great. Shipping to the US only. Thank you for looking at this auction. Posted with
|
|
|
CLECO 14TTA04Q PNEUMATIC PISTOL GRIP 1/4" REV SCREWDRIVER AIRCRAFT TOOLS
CLECO 14TTA04Q PNEUMATIC PISTOL GRIP 1/4" REV SCREWDRIVER-THIS CLECO AIR SCREWDRIVER IS USED IN GOOD CONDITION! SEE PICS! CLECO MODEL 14TTA04Q-SIZE: 1/4" HEX-RPM: 1100-WEIGHT: 1.85 LBS-REVERSIBLE- 3- 40 IN LBS 0.3- 4.5 NM-HAS AN ENGRAVING-COMES EXACTLY AS PICTURED! THESE RETAIL NEW FOR $1.000.00! GREAT FIND!
|
|
|
CHICAGO PNEUMATIC 3/4" DRIVE AIR RATCHET NUTRUNNER FOR REPAIR AIRCRAFT TOOLS
CHICAGO PNEUMATIC 3/4" DRIVE AIR RATCHET NUTRUNNER FOR REPAIR-THIS NUTRUNNERS MOTOR WORKS AND RUNS GOOD BUT THE HEAD NEEDS REPAIR! THE HEAD IS LOOSE AND COMES OFF(see pics) UNSURE IF THE HEAD IS MISSING ANY PARTS(comes exactly as pictured) MADE BY CHICAGO PNEUMATIC IN THE USA! DRIVE: 3/4" WEIGHT: 2.35 LBS-SELLING"AS IS" FOR REPAIR AND/ OR PARTS! COMES EXACTLY AS PICTURED! SEE ALL PICTURES! NO RETURNS ON THIS ITEM PLEASE GREAT FIND!
|
|
|
STANLEY PNEUMATIC A30LATA-30F2 NUTRUNNER 3/8" RPM 2800 AIRCRAFT TOOLS
STANLEY PNEUMATIC A30LATA-30F2 NUTRUNNER 3/8" RPM 2800-STANLEY PNEUMATIC MODEL A30LATA-30F2-DRIVE: 3/8" COMES WITH A A-3053 HEAD-RPM: 2800-WEIGHT: 2.80 LBS-RUNS GREAT! COMES EXACTLY AS PICTURED GREAT FIND!
|
|
|
SIOUX PNEUMATIC PISTOL GRIP 1/4" HEX SCREW GUN DRIVER AIRCRAFT TOOLS
SIOUX PNEUMATIC PISTOL GRIP 1/4" HEX SCREW GUN DRIVER-THIS AIR SCREW GUN DRIVER IS USED IN GOOD CONDITION AND WORKS GOOD! TOP OF THE LINE AIR TOOLS MADE BY SIOUX-RPM: 5200-WEIGHT: 2 LBS-SIZE: 1/4 HEX-HAS THE NOISE FILTER CONNECTION MISSING LOCATED NEXT TO THE AIR FITTING CONNECTION(see pics) TOOL IS STILL NOT LOUD WITHOUT IT-COMES EXACTLY AS PICTURED! GREAT FIND!
|
|
|
Large Air Tool Lot 27 Ingersoll Rand & Sioux Pneumatic Drills Aircraft Tools
You get all 27 tools pictured. The lot includes Ingersoll Rand and Sioux 3/8" and 1/2" Drills. These are excellent for aircraft work as well as furniture construction and upholstery work. These came out of a working furniture factory. All tools work. At this price these are a steal.
|
|
|
Aro Pneumatic Drill, 1/64"-5/16" Rohm Chuck, 5,000 RPM. Aircraft Tools
Used Aro Pneumatic Drill. 1/64"5/16" quick change Rohm Chuck, 5,000 RPM. These drills are in great working condition, they turns straight. These are very nice small drills. Made in USA. No chuck key is included. Shipping to the USA only. Thank you for looking at this auction. Posted with
|
|
|
Cleco 4RSA10 Pneumatic Screwdriver, 1/4" Hex- Aircraft Tools
Used Cleco 4RSA10 Pneumatic Screwdriver. 1/4" Hex Good working condition. Shipping to the USA only- Thank you for looking at this auction. Posted with
|
|
|
Chicago Pneumatic 1/4" 24000 RPM Air Die Grinder Aircraft Auto Marine Tools
Chicago Pneumatic 1/4" 24000 RPM Air Die Grinder Aircraft Auto Marine Tools Chicago Pneumatic 1/4" 24000 RPM Air Die Grinder Runs smooth. Straight and strong.
|
|
|
MICRO MILLER AT429 HEAVY DUTY PNEUMATIC RIVET SHAVER AIRCRAFT TOOLS
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! HERE WE HAVE A VERY NICE 12000 RPM RIVET SHAVER SET BY AIRCRAFT TOOLS INC. THIS IS A MICRO MILLER COMPLETE WITH FOOT AND A SET OF 9 GUIDES AND SHAVER BITS PART# AT429 SN# 5130-621-2647 ALL STILL IN ITS METAL CASE FOR FURTHER QUESTIONS PLEASE INBOX US THANKS
|
|
|
Pair of Dotco pneumatic aircraft mechanic's air grinders/drills/tools! Nice~N/R
Very rare vintage Dotco USA aircraft mechanic's pneumatic air grinders/drills/tools! Item Description: You might be able to find more info or specs by researching online Very good cosmetic condition! We found these tools at an estate sale and don't know anything about them. They seem to have be well cared for and the bits on the ends spin freely and aren't frozen up so there shouldn't be any problems but since we weren't able to test them. We are selling them as is! Shipping: International bidders please read international shipping info below before bidding! All the shipping costs listed below include a handling charge and are not negotiable! We ship within 2 to 5 business days of receiving cleared payment. Please allow 2 to 5 business days for delivery(up to 14 business days for- International) Shipping Cost: Lower 48 ... moreStates $24.95- AK. HI, PR and APO/FPO $49.95(USPS Parcel post, up to 30 days for delivery) or $69.95(USPS Priority mail, 3 to 5 days for delivery) Some buyers qualify for Ebay’s Global shipping program! Here is a list of the countries that are included: Australia. Bulgaria, Canada, China, Cyprus, Czech Republic, Denmark, Estonia, Finland, Greece, Hungary, Indonesia, Latvia, Lithuania, Malta, Portugal, Romania, Slovakia, Slovania, South Africa, South Korea, Sweden, Thailand and the United Kingdom! Note: Ebay charges an import fee and even with this fee the shipping is usually less than our International S&H price but we have no way of knowing what those fees are so you may have to contact Ebay for that information! All other International $129.95(USPS Priority mail International) Residents in Africa. Asia and Japan please add $70.00 to the International S&H rate making your total $199.95 We might combine shipping on additional items won for less but please email us first to see if we’re able to do that and we can quote you a price as well Payment: PayPal is our only accepted payment method. If you do not have a PayPal account it is very easy to sign up and is the safest w
|
|
|
ARO 600 RPM Pneumatic Drill 3/8 Chuck Aircraft Tools Air Drill
I HAVE A LARGE 3/8 CHUCK ARO DRILL MOTOR. MADE MY ARO CORP, BRYAN, OHIO, 600 RPM, CAN'T FIND THE CHUCK KEY, THANKS FOR LOOKING.
|
|
|
CLECO 5RSATP-10BQ PNEUMATIC PISTOL GRIP 1/4" REV SCREWDRIVER AIRCRAFT TOOLS
CLECO 5RSATP-10BQ PNEUMATIC PISTOL GRIP 1/4" REV SCREWDRIVER-THIS CLECO AIR SCREWDRIVER IS USED IN GOOD CONDITION! SEE PICS! CLECO MODEL 5RSATP-10BQ-SIZE: 1/4" HEX-RPM: 1100-REVERSIBLE-ENGRAVED-COMES EXACTLY AS PICTURED! THESE RETAIL NEW FOR OVER $1.000.00! GREAT FIND!
|
|
|
Ingersoll Rand Straight Pneumatic Screwdriver - Aircraft Tools
Used Ingersoll Rand Straight. Pneumatic screwdriver. Great working condition. RPM 2800. Overall Length 8"
|
|
|
MICRO MILLER AT 429 HEAVY DUTY PNEUMATIC RIVER SHAVER AIRCRAFT TOOLS
12000 RPM RIVET SHAVER BY AIRCRAFT TOOLS PART N AT 429
|
|
|
DMC Daniels Safe-T-Cable Pneumatic Safety Wire Tool Aircraft Tools
This is a DMC Daniels model SCTP323 pneumatic Safe T Cable pneumatic installation tool. It works great. It is missing the 3" nose. The nose is available from DMC online. This is a current model tool. It is surplus from the US Air Force. Sells online for about $1000.
|
|
|
Quackenbush Pneumatic Air Aviation Aircraft Avionics Tools
Quackenbush Pneumatic Air Aviation Aircraft Avionics Tools Cooper Tools. TX, USA Model: 140QGDARASUMSB Code No: 670701 RPM: 1000 FD.002 Model: 140QDARASUMSB Code No: 670774 RPM: 1400 FD.002 Two of the tools have tags on them as shown in the photos. Other remaining tools do not have tag on them. Quantity: Five(5) Air Tools PAYMENT: Paypal payment is due immediately for“Buy-it-now” listings and within 2 days for auction listings. If payment is not received within the specified time. We reserve the right sell the item to a different buyer. If SHIPPING is offered and price is quoted above: Shipping Address: According to Ebay/Paypal policies. We are required to ship ONLY to the address in either your Ebay(default shipping address) or Paypal account. The request for shipping to a different address cannot be honored as it disallowed according to ... moreEbay/Paypal policies. International Shipping: Import duties. Taxes, and surcharges are already included as quoted when shipped through the Global Shipping Program. If the item is not shipped through the Global Shipping Program. Then duties, taxes, and surcharges are not included in the item price or shipping charges, and they are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be if you are concerned. ABOUT US: We are not affiliated with the brand names being sold. And brands mentioned are for identification purposes only. TERMS OF SALE: The item(s) in the photos are the actual item(s) for sale. And it is exactly what you will receive. Only the item(s) shown in the photos are included. Items in the photo(s) will supersede the written description should there is any discrepancy due to inadvertent description error. Please refer to photos for details and condition. If an item is used. Please note that it will have the expected wear when purchasing used goods. All measurements are approximates. Items are sold in“as is” condition. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Dotco 6000 RPM Pneumatic Palm Drill w/ 1/4" Chuck Aircraft Tools
Dotco 6000 RPM Air Drill Motor Model 15CNS98 Very nice Palm Drill*Includes 1/4" Chuck* Surplussed by a major aircraft manuafacturer Tested and lubricated Very good working condition*These motors are still good for years of excellent service* See my for more drill motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying.
|
|
|
Dotco 3200 RPM Pneumatic Palm Drill with 1/4" Chuck Aircraft Tools
Dotco 3200 RPM Air Drill Motor Model 15CSS92 Very nice Palm Drill*Includes 1/4" Chuck* Surplussed by a major aircraft manuafacturer Tested and lubricated Very good working condition*These motors are still good for years of excellent service* See my for more drill motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying.
|
|
|
Usatco Pneumatic Rivet Shaver Aircraft Aviation Tools
This auction is for an Usatco model TD300B. 20000 RPM pneumatic rivet shaver. This item is used, but in excellent working condition. Description- Model: TD-300 B- Free Speed: Estimated 20.000 RPM- Skirt Accepts up to 7/16" Shaver- Air Inlet: 1/4" This item is offered with a money back guarantee. If within 5 days of receiving this item. You find that it is not in the condition described, return it for a full refund, less shipping.
|
|
|
Nice Pyles Pneumatic Sealant Gun with 2 Tubes & Extra Long Hose Aircraft Tools
This is a very nice clean Pyles sealant gun. Works great. No leaks. It has a extra long 10' air hose and 2 tubes. The tubes have 2.5 OZ and 6 OZ capacities.
|
|
|
Aircraft tools Assortment Pneumatic rivets
ALL SHOWN INCLUDED IN ASSORTMENT Items are used Any Questions. Please call Steve at 316-761-2382
|
|
|
SIOUX 1457ES-106 PNEUMATIC 20,000 RPM RIVET SHAVER MOTOR AIRCRAFT TOOLS
SIOUX 1457ES-106 PNEUMATIC 20.000 RPM RIVET SHAVER MOTOR-SIOUX MODEL 1457ES-106-STRONG FAST MOTOR-RPM: 20.000-WEIGHT: 2.10 LBS-NSN# 5130006212647-HAS A THREADED HEAD THAT ACCEPT BITS-HAS A SMALL SANDED MARK WHERE A MILITARY ETCHED NUMBER WAS REMOVED(cosmetic) IN VERY GOOD CONDITION! GREAT FIND!
|
|
|
Tiny Vac Mini Pneumatic Vacuum w Hose "Loses Air" Aircraft Tools
Tiny Vac Mini Pneumatic Vacuum w Hose"Loses Air" Vacuum works but loses air through the on/off button-On/Off button does not work-Tiny Vac Mini Air Vacuum-This tool is surplus from the US Military! Comes with 16" hose-Has black marker and sanded area where military numbers were covered(cosmetic) Made in the USA! Comes exactly as pictured!
|
|
|
ARO 3" OFFSET REVERSIBLE PNEUMATIC THREADED PANCAKE DRILL AIRCRAFT TOOLS Foot
This auction is for the aro reversible pancake drill as seen in the pic. It has 9/32-40 Boeing standard threads. See other auction for 1/4-28. This is a great working tight tool. It is of the best quality you can get. I have been a sheetmetal guy for a long time and everyone that drills and fills holes should have one of these. The head of the drill is indexable please see pictures. It does have some engravings but otherwise doesn't hurt the operation. I have many other auctions with aviation related tools and manuals. I you have any questions don't hesitate to shoot me an email or text. My contact info is on my store homepage. Thanks for looking. Posted with eBay Mobile Posted with
|
|
|
Aro Wedgelock Pneumatic Tool-Aircraft Tools
Used Aro Wedgelock Pneumatic Tool-Aircraft Tools This tool is for installing and removing wedgelocks. Works great, some nicks and scratches. 2,300 rpm. Made in USA. Shipping to the US only. Thank you for looking at this auction. Posted with
|
|
|
Ingersoll Rand 3/8" Pneumatic Ratchet - Aircraft Tools
Ingersoll Rand’s Edge Series 170G delivers the power you need to get the job done. At 55 ft-lb of maximum torque and 170 rpm free speed. This tool is the perfect fit for all of your projects. The 170G can be used in a broad range of applications where light disassembly and assembly of products is necessary. Use the 170G to access those hard to reach tight spaces. 3/8" Drive, Powerful motor delivers 55 ft-lbs of torque and 170 rpm of free speed, Heat-treated ratchet head ensures a longer life for the tool. Protecting your investment, Ergonomic grip provides better comfort. Keeping you on the job and finishing tasks quickly, 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1437e762d2d-0xfc-
|
|
|
ATI Mini Vac Pneumatic Vacuum w Hose Aircraft Tools
ATI Mini Vac Pneumatic Vacuum w Hose-ATI Mini Air Vacuum-This tool is surplus from the US Military! The plastic area where the hose connects has some cracks-Comes with hose but needs the inner plastic piece that connects the hose to the vacuum-Has black marker and sanded area where military numbers were covered(cosmetic) Made in the USA! Comes exactly as pictured! Has an on/ off switch-Works good Great Find!
|
|
|
Rockwell 5000 RPM Pneumatic Drill New ROHM Chuck Aircraft Tools Air Drill
Rockwell 5000 rpm drill with new ROHM chuck and key Posted with
|
|
|
DOTCO 14CFS93-38 PNEUMATIC 3200 RPM RIVET SHAVER AIRCRAFT TOOLS
DOTCO 14CFS93-38 PNEUMATIC 3200 RPM RIVET SHAVER-DOTCO MODEL 14CFS93-38 P NEUMATIC RIVET SHAVER-RPM: 32000-WEIGHT: 2.50 LBS-MOTOR RUNS SMOOTH-HAS A THREADED HEAD THAT ACCEPTS INDUSTRY STANDARD 1/4 X 28 SHAVER BITS-HAS SANDED MARKS WHERE MILITARY ETCHED NUMBERS WERE REMOVED(cosmetic) ALSO HAS A SMALL PIECE OF THE BODY BROKEN OFF(see pic 6) cosmetic-COMES EXACTLY AS PICTURED GREAT FIND!
|
|
|
Sioux Pneumatic Screwdriver Gun Aircraft Auto Dotco Jiffy Air Drill Tools
Sioux Pneumatic Screwdriver Nutrunner Gun 2P2107 Aircraft Auto Dotco Jiffy Tools Sioux Reversable Screwgun 700 RPM. Model 2P2107 In excellent working condition. Runs smooth. Straight and strong. Bit and magnetic holder included.
|
|
|
DOTCO 15CFS60-95 PNEUMATIC 29,000 RPM RIVET SHAVER NEEDS REPAIR AIRCRAFT TOOLS
DOTCO 15CFS60-95 PNEUMATIC 29.000 RPM RIVET SHAVER NEEDS REPAIR-THIS RIVET SHAVER DOES NOT RUN WHEN TRIGGER IS PRESSED-AIR JUST COMES OUT AND DOES NOT SPIN-DOTCO MODEL 15CFS60-95 PNEUMATIC RIVET SHAVER-RPM: 29.000-WEIGHT: 2.50 LBS-HAS A THREADED HEAD THAT ACCEPTS INDUSTRY STANDARD 1/4 X 28 SHAVER BITS-HAS A SMALL SANDED MARK WHERE A MILITARY ETCHED NUMBER WAS REMOVED(cosmetic) COMES WITH FOOT-COMES EXACTLY AS PICTURED-WE DO NOT REPAIR AIR TOOLS THEREFORE DO NOT KNOW WHAT IS WRONG WITH THIS RIVET SHAVER-THIS MAY BE AN EASY FIX BUT WE DO NOT KNOW-SELLING"AS IS" FOR REPAIR AND/ OR PARTS GREAT FIND! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144104fe6f9-0x101-
|
|
|
SMALL STANLEY PNEUMATIC 1/4" SCREW GUN / DRIVER RPM 2700 AIRCRAFT TOOLS
SMALL STANLEY PNEUMATIC 1/4" SCREW GUN/ DRIVER RPM 2700-STANLEY PNEUMATIC MODEL F30P46TA-20 SCREW GUN/ DRIVER-SIZE: 1/4" HEX-RPM: 2700-LENGTH: ONLY 6" WEIGHT: 2.25 LBS-MOTOR RUNS GOOD-COMES EXACTLY AS PICTURED GREAT FIND!
|
|
|
STANLEY PNEUMATIC A30LATA-11P2 NUTRUNNER 3/8" DRIVE, RPM 540 AIRCRAFT TOOLS
STANLEY PNEUMATIC A30LATA-11P2 NUTRUNNER 3/8" DRIVE. RPM 540-STANLEY PNEUMATIC MODEL A30LATA-11P2-DRIVE: 3/8" COMES WITH A A-3053 HEAD-RPM: 540-WEIGHT: 3.45 LBS-RUNS GREAT! COMES EXACTLY AS PICTURED GREAT FIND!
|
|
|
AMERICAN PNEUMATIC TOOL/ APT-650 AIRCRAFT TOOLS / SHEET METAL SHEAR / TRIMMER
This is in good working condition. Blades in good condition. This tool has a lot of power packed into a small unit and cuts metal amazingly. This tool is awesome for sheet metal techs. Great time save for doing quick trims and tab cutter. No trips back to the shear. Any question please ask. I sell for aircraft techs at a low cost and great tools. Not to make a big profit like the others guys. Purchase from some who is an A&P IA who knows what its like to buy the high dollar tools. I purchase low and share with the community. Specifications: Shearing Capacity 1/16" Steel or 3/32"Alum. 90 psi Max. Throat Opening: 1/8" x 3" Shearing Force: ft.lbs. Weight: lbs. Overall Dimensions: 6 3/4" High x 4 3/8" Wide x 8 5/8" long Air Inlet Thread: 1/4" NPT The light weight compact model 650 tab shear features ... morecomplete portability. Trimming and shearing operation can be done on the job site safely. Quickly, cleanly, and efficiently with this precision tool. You, can rapidly shear router tabs from aluminum, steel, titanium, and stainless steel as well as utilize it for other similar trimming and shearing jobs. This powerful tool features finger tip operation. The trigger valve button is insert to prevent accidental actuation. Replaceable Shear Blades Heavy Duty Construction Heat Treated Steel Parts Anodized Aluminum Parts Light Weight Four Cutting edges Precisely balanced for easy handling
|
|
|
Rockwell 3000 RPM Pneumatic 1/4" Air Drill, Jacobs Chuck, Aircraft Tools Air
This Rockwell Model F air drill is in good condition. I tested it and it runs fine. It comes with a Makita holster and a Milton Blo-Gun. Sorry, there is no chuck key with this drill.
|
|
|
ATLAS COPCO LIGHTWEIGHT LUM12 SR11-U PNEUMATIC 5" DRILL MOTOR AIRCRAFT TOOLS
ATLAS COPCO LIGHTWEIGHT LUM12 SR11-U PNEUMATIC 5" DRILL MOTOR-THIS PANCAKE DRILL NEEDS REPAIR. DOES NOT WORK-IT IS MISSING THE PANCAKE HEAD AND IT DOES NOT SPIN WHEN CONNECTED TO AIR-UNSURE AS TO WHY IT DOES NOT SPIN. IT MAYBE A SIMPLE FIX OR NOT-ATLAS COPCO MODEL LUM12 SR11-U-REVERSIBLE-LIGHTWEIGHT AT ONLY 1 POUND! ATLAS COPCO ARE TOP OF THE LINE AIR TOOLS FOR THE AIRCRAFT/ AVIATION INDUSTRY-COMES EXACTLY AS PICTURED! SELLING"AS IS" NO RETURNS GREAT FIND!
|
|
|
Jiffy Model 4500 Air Drill, with extras, aircraft tools, pneumatic tools
Jiffy model 4500 air drill. Item runs good and comes with: 1) drill extension(1) hole duplicator, AT 532-62#30(1) micro-stop with cutter(10) stubby threaded 1/4-28, 3/16" drills What you see is what you'll receive
|
|
|
Lot of Rockwell Deutsch Ingersoll Rand Cleco Pneumatic Tools Air Tool Aircraft
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2431124 A: 0013000000CXCfg O: 0065000000QLbO2 PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Lot of Misc Rockwell Deutsch Ingersoll Rand and Cleco Pneumatic Tools This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Lot includes various tools used by consignor in an aircraft ... moremanufacturing environment. We are not able to itemize or quantify the entire lot of tools offered. Please view the photos to get a sense of what is included. Items Observed: Rockwell Pneumatic Pistol Grip Tool Deutsch Pneumatic Pistol Grip Tool Ingersoll-Rand Pneumatic Pistol Grip Tool Cleco Pneumatic Socket Wrench Please Note: The metal tub shown in the photos is not included& is not available for purchase Also. The plastic containers holding the tools are not included- smaller items will be put into plastic bags This lot will be shipped freight in a gaylord or heavy-duty corrugated cardboard container box on a pallet A combined $100 handling charge for the box. Skid& packaging will apply to this auction Shipping Dimensions: L 48" x W 42" x H 24" Weight: 603 lbs Condition: Good Overall- reported to be working at time of decommission Untested by bidadoo- some units may require repair Normal wear from previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(in
|
|
|
General Pneumatic Rivet Squeezer With ATI Die Set - American Made Aircraft Tools
Normal 0 false false false EN-US X-NONE X-NONE C Squeezer with Die Set- General Pneumatic"C" Squeezer- Model 6000C- Operates perfectly- Takes 3/16" shank squeezer sets- Excellent condition ATI Squeezer Die Set- Model AT108A-33PC- One flush set is broken so I replaced it with a new one so the set would be complete- Most sets have some sort of light sanding on them. Military surplus* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-145ac0c645b-0x103-
|
|
|
APT 1000-SD2 PNEUMATIC 3" PANCAKE OFFSET NUTRUNNER AIRCRAFT TOOLS
APT 1000-SD2 PNEUMATIC 3" PANCAKE OFFSET NUTRUNNER-AMERICAN PNEUMATIC TOOLS APT MODEL 1000-SD2 NUTRUNNER-OFFSET PANCAKE IS 3" HEX OPENING IS 3/8" MOTOR RUNS GREAT-COMES EXACTLY AS PICTURED-MADE IN THE USA GREAT FIND!
|
|
|
Rockwell 90 degree Pneumatic Nutrunner Air rachet 3/8in drive aircraft tools !!
Here is a good 90 degree nutrunner air rachet. 450 rpm with great torque. Its got fwd and rev. Also comes with spline socket attached. Its a 3/8 drive unit so great for breaking down aircraft wheels in my opinion. Any questions ask mike
|
|
|
Pneumatic Rivet Squeezer C-Yoke 2-1/2" Aircraft Tools
Pneumatic Rivet Squeezer C-Yoke 2-1/2" reach with a 1-1/4" gap. Slightly Bent. Used Surplus. It will fit all standard single and tandem cylinder squeezers on the market including Chicago Pneumatic. General Pneumatic, US Industrial, Atlantic Air tool.
|
|
|
ARO EQUIPMENT PNEUMATIC PANEL SAW – AIRCRAFT TOOLS / AVIATION
ARO EQUIPMENT PNEUMATIC PANEL SAW– AIRCRAFT TOOLS/ AVIATION CONDITION: Used/ See Photos Good Working Condition– need to pull trigger forward a bit to engage lock. Will Combine Shipping– Request Invoice All items are shipped USPS economy and same cost to all buyers. So please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. Typically the shipping charge will be less than the actual cost to ship. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used Should there be a shipping difference that money will be immediately refund. Please e-mail with questions
|
|
|
PNEUMATIC NEEDLE SCALER AIR NEEDLE SCALER INLINE - Welding tools Aircraft tools
Here is a good condition pneumatic scaler in great working condition. This thing has some power behind it and an awesome grip in your hands. Great for knocking slag off arc welds. any questions please ask. Mike
|
|