Rockwell 5000 RPM Pneumatic Drill Quick Change Chuck Aircraft Tools Air Drill
Rockwell 5000 RPM Drill Motor With 1 Year Warranty 5000 rpm Includes Magnavon Quick Change Chuck Use with Aerospace Industry Quick Change Drill Bits Can also be used with any standard 3/8"24 jaw type threaded chuck 1 year warranty against defects Rated at 90 PSI Tested for proper operation These motors are still good for years of excellent service Surplussed from a working environment in a major aircraft manufacturer. Drills may have markings. Condition of paint if any will vary. Rockwell Model 31D101 5000 RPM drill motor has been thoroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. See my for drill bits for these motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before ... morepaying. Quick Reference Guide to Store Categories. Click Title to go to Category
|
|
Rockwell 725 RPM Pneumatic Drill 1/2" Chuck Aircraft Tools Air Drill
Rockwell 725 RPM Drill Motor With 1 Year Warranty 725 rpm Includes 1/2" Key Chuck Can also be used with any standard 1/2"20 jaw type threaded chuck 1 year warranty against defects Rated at 90 PSI Tested for proper operation Chuck Key Included These motors are still good for years of excellent service Surplussed from a working environment in a major aircraft manufacturer. Drills may have markings. Condition of paint if any will vary. Rockwell Model 41D106 725 RPM drill motor has been thoroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. See my for drill bits for these motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. Quick Reference Guide to Store Categories. ... moreClick Title to go to Category
|
|
AIRCRAFT TOOLS INGERSOLL RAND PALM DRILL 3AL1 1/4 CHUCK KEY & FITTING
THIS IS A NICE USED INGERSOLL RAND TRUE PALM DRILL IT HAS A 1/4 JACOBS CHUCK W/KEY AND AIR FITTING IT HAS 2600 RPMS AND RUNS STRAIGHT AND TRUE THE DRILL HAS FULL POWER AND RUNS GREAT IT HAS HAD AN ID# REMOVED AS SEEN SHIPPING WILL BE FREE ANYWHERE IN THE USA AND APOS Posted with
|
|
Dotco 600 RPM Pneumatic Drill W/QC Chuck Aircraft Tools
Reconditioned Dotco 600 RPM Air Drill Motor Model 15C1489A Very nice Palm Drill*Includes Magnavon Quick Change Chuck* Use with Aerospace Industry Quick Change Drill Bits* Can also be used with any standard 3/8"24 chucks* See my for drill bits for these motors. These motors are still good for years of excellent service* Reconditioned Dotco Model 15C1489A 600 RPM drill motor has been thouroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. Quick Reference Guide to Store Categories. Click Title to go to Category
|
|
MINI Boeing QC or QUICK CHANGE CHUCK for ANGLE DRILL Aircraft / Aviation Tools
These are VERY near New Surplus tools. Magnavon Quick Change MINI Chuck made for use in Angle Drills and Pancake drill attachments that accept the standard 1/4-28 Threaded accessories. The drill bit shown is for display purposes only and is a representation of the Boeing style drill accessory or drill bit. Retail on these is over $35ea so $12.95 is a steal. VERY CHEAP SHIPPING. WORLDWIDE FREE SHIPPING on(3) or more Chucks. Dont forget to check out our other aviation related auctions including aircraft tools. I will be listing more every day. Thanks Check out my!
|
|
ARO 950 RPM Pneumatic Drill 3/8 Chuck Aircraft Tools Air Drill
ARO 950 RPM Drill Motor With 1 Year Warranty 950 rpm Includes 3/8" Key Chuck Can also be used with any standard 3/8"24 jaw type threaded chuck 1 year warranty against defects Rated at 90 PSI Tested for proper operation These motors are still good for years of excellent service Surplussed from a working environment in a major aircraft manufacturer. Drills may have markings. Condition of paint if any will vary. ARO Model 8428-6 950 RPM drill motor has been thoroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. See my for drill bits for these motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. Quick Reference Guide to Store Categories. Click Title to go ... moreto Category di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13f06fa4744-0xf2-
|
|
Rockwell 500 RPM Pneumatic Drill 1/2" Chuck Aircraft Tools Air Drill
Rockwell 500 RPM Drill Motor With 1 Year Warranty 500 rpm Includes 1/2" Key Chuck Can also be used with any standard 1/2"20 jaw type threaded chuck 1 year warranty against defects Rated at 90 PSI Tested for proper operation Chuck Key Included These motors are still good for years of excellent service Surplussed from a working environment in a major aircraft manufacturer. Drills may have markings. Condition of paint if any will vary. Rockwell Model 41D107 500 RPM drill motor has been thoroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. See my for drill bits for these motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. Quick Reference Guide to Store Categories. ... moreClick Title to go to Category.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f06fa47b4-0x107-
|
|
Rockwell 750 RPM Pneumatic Drill 3/8 Chuck Aircraft Tools Air Drill
Rockwell 750 RPM Drill Motor With 1 Year Warranty 750 rpm Includes 3/8" Key Chuck Can also be used with any standard 3/8"24 jaw type threaded chuck 1 year warranty against defects Rated at 90 PSI Tested for proper operation Chuck Key Included These motors are still good for years of excellent service Surplussed from a working environment in a major aircraft manufacturer. Drills may have markings. Condition of paint if any will vary. Rockwell Model 31D106 750 RPM drill motor has been thoroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. See my for drill bits for these motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. Quick Reference Guide to Store Categories. ... moreClick Title to go to Category
|
|
Sioux 1453 Pneumatic Drill, 1/4" Chuck, 5,000 RPM. Aircraft Tools
Used Sioux Pneumatic Drill. 1/4" Chuck, 5,000 RPM. These drills are in great working condition, they turns straight. These are very nice small drills. Made in USA. Some of the paint has worn off. No chuck key is included. Shipping to the USA only. Thank you for looking at this auction. Posted with
|
|
Zephyr Microstop Countersink Cage QC Chuck Aircraft Tools
2 Full Face Zephyr Microstop Countersink Cages 1 QC Chuck 3/8-24 Standard Air DrillThread. 4 Assorted Cutter Bits. Size Will Vary From#40 to.312" Zephyr Microstop Has 5/16" Shank Works With The QC Boeing Style Chuck Included Or 5/16 Or Larger Jacobs Chuck Book Mark Our Store HomePage: All Tools are in good working condition. Tools may have normal wear. Chemical stains, paint, etchings, Tool marks etc. Check out our other Hi-lok tools: http:stores.ebay.com/justplanetools We carry a large selection of Aircraft Tools and accessories for all budgets. We ship worldwide $25.00. Canada $20.00. All items must be paid for within 7 days of auction close. We combine shipping costs on mutiple items. Overseas Buyers Note. New Shipping Rates Now Apply. We Ship USPS As Iowest Possible Cost $25.00. We Combine Shipping On Multiple Purchases. BUY ... moreIT NOW ALL ITEMS THEN REQUEST TOTAL FROM SELLER. You will receive combined shipping Discount. If your overseas buyer contact us first if you have any questions about shipping costs. Customs forms and payment, etc. E-mail us with any questions. Thanks for shopping.
|
|
IR HD 90 Degree Angle Drill 2000 rpm 3/8" ROHM Chuck Aircraft Aviation Tools
14.00 Normal 0 false false false EN-US X-NONE X-NONE 14.00 Normal 0 false false false EN-US X-NONE X-NONE 14.00 Normal 0 false false false EN-US X-NONE X-NONE 14.00 Normal 0 false false false EN-US X-NONE X-NONE Ingersoll-Rand HD 90 ° Angle Drill! All Sheet-Metal Technicians need one of these! MFG: Ingersoll-Rand/ Model: 00B2L/ Rohm 3/8" Chuck• Over-All-Length: 10-1/2" RPM: 2000 Features: Heavy Duty Head/ Strong Motor Very light use. Greased, Oiled and Ready to Ship! Stock Photo's: Excellent working condition! Absolutely no wobble. Drills Straight and True. Made in USA. Approximately 3 lbs 2.9 ozs. World-Wide Shipping. Includes: Chuck Key not in photos! 14.00 Normal 0 false false false EN-US X-NONE X-NONE SATISFACTION GUARANTEED! 14.00 Normal 0 false false false EN-US X-NONE X-NONE. Check out my! 14.00 Normal 0 false false ... morefalse EN-US X-NONE X-NONE Statement of Policy's& Procedures: On-Line Sales Only! Buyers pay calculated shipping costs as shown in the“ Shipping and payments” section. To save you money on shipping cost we combine multiple items into USPS Flat Rate Boxes when shipping. We do not charge handling fees. Acceptable payment methods include: PayPal, Pay on PayPal's web-site with e-check. Credit or debit cards} We use the United States Postal Service for all shipments unless otherwise stated. If you need a certain shipper you will have to contact us. We comply with all foreign customs policies. We do not falsify customs declaration values of purchased items for international shipments.
|
|
Aro Pneumatic Drill, 1/64"-5/16" Rohm Chuck, 5,000 RPM. Aircraft Tools
Used Aro Pneumatic Drill. 1/64"5/16" quick change Rohm Chuck, 5,000 RPM. These drills are in great working condition, they turns straight. These are very nice small drills. Made in USA. No chuck key is included. Shipping to the USA only. Thank you for looking at this auction. Posted with
|
|
ARO 600 RPM Pneumatic Drill 3/8 Chuck Aircraft Tools Air Drill
I HAVE A LARGE 3/8 CHUCK ARO DRILL MOTOR. MADE MY ARO CORP, BRYAN, OHIO, 600 RPM, CAN'T FIND THE CHUCK KEY, THANKS FOR LOOKING.
|
|
Rockwell 90 Degree Drill Motor with Chuck - Aircraft Tools
Used Rockwell 90 Degree Angle Drill Motor. Great working condition. RPM 2100. Chuck Capacity 0-1/4
|
|
Dotco 6000 RPM Pneumatic Palm Drill w/ 1/4" Chuck Aircraft Tools
Dotco 6000 RPM Air Drill Motor Model 15CNS98 Very nice Palm Drill*Includes 1/4" Chuck* Surplussed by a major aircraft manuafacturer Tested and lubricated Very good working condition*These motors are still good for years of excellent service* See my for more drill motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying.
|
|
Dotco 3200 RPM Pneumatic Palm Drill with 1/4" Chuck Aircraft Tools
Dotco 3200 RPM Air Drill Motor Model 15CSS92 Very nice Palm Drill*Includes 1/4" Chuck* Surplussed by a major aircraft manuafacturer Tested and lubricated Very good working condition*These motors are still good for years of excellent service* See my for more drill motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying.
|
|
Dotco 6000 rpm Air drill w new ROHM Chuck & Quick Chuck Aircraft Aviation Tools
Dotco 6000 rpm drill with quick chuck and new ROHM chuck and key. I have added a couple of double margins and quick chuck bits to sweeten the deal. Thanks for your interest. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1439495ced3-0x107-
|
|
Rockwell 5000 RPM Pneumatic Drill New ROHM Chuck Aircraft Tools Air Drill
Rockwell 5000 rpm drill with new ROHM chuck and key Posted with
|
|
Rockwell 3000 RPM Pneumatic 1/4" Air Drill, Jacobs Chuck, Aircraft Tools Air
This Rockwell Model F air drill is in good condition. I tested it and it runs fine. It comes with a Makita holster and a Milton Blo-Gun. Sorry, there is no chuck key with this drill.
|
|
ROCKWELL 1000 RPM,Avionic-Aircraft Tools Air Drill W/JACOBS Chuck 32B, USA. made
Great find Excellent working condition 1000 RPM nice looking powerful tool with wood handle ready for heavy work with JACOBS CHUCK# 32B thanks for looking please see my other tools!
|
|
Rockwell 3300 RPM Pneumatic Drill 1/4" Chuck Aircraft Tools Air Drill
This Rockwell drill is almost new as evidenced by the photos. Do not miss out on this bargin. There is no reserve on this auction.
|
|
DOTCO 1/2 CHUCK DRILL AIRCRAFT TOOLS AVIATION
THIS IS A VERY NICE DOTCO DRILL IT HAS 1900 RPMS AND A 1/2 CHUCK W/KEY IT ALSO COMES WITH AN ADJUSTABLE HANDLE THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT SHIPPING WILL BE FREE ANYWHERE IN THE USA.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-1491505d0bd-0x10b-
|
|
DOTCO SLOW MOTOR 1/2 CHUCK DRILL AIRCRAFT TOOLS AVIATION
THIS IS A VERY NICE DOTCO SLOW MOTOR DRILL IT HAS 640 RPMS AND A 1/2 CHUCK W/KEY IT ALSO COMES WITH AN ADJUSTABLE HANDLE THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
CHICAGO PNEUMATIC MINI PALM DRILL 1/4 CHUCK AIRCRAFT TOOLS AVIATION
THIS IS A VERY NICE CHICAGO PNEUMATIC MINI PALM DRILL IT HAS 5000 RPMS AND A 1/4 CHUCK W/KEY THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
INGERSOLL RAND 1/2 CHUCK DRILL SLOW MOTOR AIRCRAFT TOOLS AVIATION
THIS IS A VERY NICE INGERSOLL RAND 1/2 CHUCK DRILL IT HAS 900 RPMS AND GREAT TORQUE THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
ATLAS COPCO PALM DRILL 1/4 CHUCK AIRCRAFT TOOLS AVIATION
THIS IS A VERY NICE ATLAS COPCO PALM DRILL IT HAS 6000 RPMS AND A 1/4 CHUCK IT ALSO COMES WITH A BOEING QUICK CHANGE CHUCK THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
BUCKEYE MINI PALM COOPER TOOLS DOTCO 1/4 CHUCK AIRCRAFT TOOLS AVIATION
THIS IS A VERY NICE BUCKEYE MINI PALM DRILL IT HAS 3200 RPMS AND A 1/4 CHUCK W/KEY THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
Aero Equipment Corp. Pneumatic Drill 1/4" Chuck Aircraft Tools Air Drill
This Aero Equipment drill is used but in excellent working condition. Brand new 1/4" chuck Key included. Shipping will by buy USPS Priority Mail( 1 to 4 business days) and is the buyers responsibility. There is no reserve on this auction.
|
|
ARO SLOW MOTOR 1/2 CHUCK DRILL AIRCRAFT TOOLS AVIATION
THIS IS A VERY NICE ARO SLOW MOTOR DRILL IT HAS 600 RPMS AND A 1/2 CHUCK THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
DOTCO SLOW MOTOR PALM DRILL BOEING CHUCK AIRCRAFT TOOLS AVIATION
THIS IS A VERY NICE DOTCO SLOW MOTOR PALM DRILL IT HAS 600 RPMS AND A BOEING CHUCK THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
PAN AMERICAN PALM DRILL 1/4 CHUCK CAGES AIRCRAFT TOOLS AVIATION
THIS IS A VERY NICE PAN AMERICAN PALM DRILL IT HAS 3000 RPMS AND A 1/4 CHUCK W/KEY IT COMES WITH A 1/4-28 THREADED DRILL EXTENSION AND 2 COUNTERSINK CAGES THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
ARO PALM DRILL TOOLS BOEING QUICK CHANGE CHUCK AIRCRAFT SMOOTH DRILL
THIS IS A VERY NICE ARO PALM DRILL IT HAS 5200 RPMS A BOEING QUICK CHANGE OR 3/8 KEYLESS(YOU CHOOSE) THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
2EA ATLAS COPCO PALM DRILL 1/4 BOEING CHUCK AIRCRAFT TOOLS 6000 & 2600 RPMS
THESE ARE 2 NICE ATLAS COPCO PALM DRILLS ONE HAS 6000 RPMS AND THE OTHER 2600 BOTH HAVING 1/4 BOEING QUICK CHANGE CHUCKS THE DRILLS RUN STRAIGHT AND TRUE. SOUNDS GREAT THE DRILLS COME WITH 40 NEW QUICK CHANGE DRILL BITS; 10EA#21-10 STEP DRILLS. 5EA#30, 5EA#21, 5EA#40, 5EA.198- 248 STEP DRILLS, 5EA.248- 310 STEP DRILLS AND 5EA.187 BITS SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
CLECO PALM DRILL 1/4 BOEING CHUCK AIRCRAFT TOOLS AVIATION
THIS IS A VERY NICE CLECO PALM DRILL IT HAS 7000 RPMS AND A 1/4 BOEING CHUCK THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
ATLAS COPCO PALM DRILL 1/4 BOEING CHUCK AIRCRAFT TOOLS AVIATION NICE
THIS IS A NICE ATLAS COPCO PALM DRILL IT HAS 6000 RPMS AND A 1/4 BOEING QUICK CHANGE CHUCK THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT SHIPPING WILL BE FREE ANYWHERE IN THE USA 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14aec97bfd0-0x117-
|
|
SIOUX PALM DRILL KEYLESS CHUCK AIRCRAFT TOOLS AVIATION 3/8 SNAP
THIS IS A VERY NICE SIOUX PALM DRILL IT HAS 4000 RPMS AND A 3/8 KEYLESS CHUCK IT HAS AN AIR SWIVEL THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
ROCKWELL PALM DRILL 1/4 BOEING CHUCK AIRCRAFT TOOLS AVIATION
THIS IS A USED ROCKWELL PALM DRILL IT HAS 5000 RPMS AND A 1/4 BOEING QUICK CHANGE CHUCK THE DRILL RUNS STRAIGHT AND TRUE. SOUNDS GREAT IT HAS A 2 STAGE TRIGGER SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|