Nose Assy Air Hydraulic Rivet Gun Nose Assembly Pneumatic Alligator Rivet Pulling Head Air Hydraulic Rivet Huck 353 Air Hydraulic Riveter Rivet Gun Rivet Cherrymax Bucking Bar Aircraft Piece Rivet Rivet Squeeze Emhart Pneumatic Rivet Puller Pneumatic Pop Rivet Gun 4X Rivet Gun Offset Rivet Air Pop Rivet Chicago Pneumatic Rivet Gun Ati Snap 1 8 Rivet Hydraulic Rivet Gun Blind Rivet Rivet Set 401 Shank Fsi D-100 Pneumatic Rivet Squeezer Textron Cherrymax Rivet Gun Nose Chicago Pneumatic Alligator Offset Rivet Set Compression Rivet Jiffy Uat Pneumatic Pop Rivet Emhart Pop Huck 352 3X Rivet Gun Rivet Gun Model Industrial Rivet Pneumatic Squeezer Huck 99 Rivet Fastener Rivet Gun Set Cherry Textron Avdel Cherry Max Squeezer Aircraft 8 Rivet Set Flush Rivet Set Ati Snap-On Rivet Set 1 Rivet Hammer Cherry Pneumatic Hydraulic Rivet Ati Snap On Tools Bucking Bar 3 16 Rivet 1 4 Rivet Aircraft Tools Snap 3 16 Rivet Set Pneumatic Compression Rivet Pneumatic Hydraulic Rivet Alligator Rivet Cherry Rivet Rivet Gun Air Hammer 401 Shank 5 32 Rivet Set Yoke Rivet Blind Rivet Gun Cherry Riveter Rivet Machine Sheet Metal Rivet Rivet Gun Aircraft Tools Pneumatic Rivet Hammer Riveter Machine Rivet Gun Kit Huck Rivet Gun Aircraft Tools Chicago Pneumatic Aircraft Rivet Sets Aircraft Tools Cleco Pop Rivet Gun Huck Nose Piece Rivet Set Lockbolt Nose Assy Cherrymax Pneumatic Aircraft Tools 2 Hand Rivet Chicago Pneumatic Rivet Aircraft Tools Ingersoll Rand Pulling Head Gage Bilt Pneumatic Blind Heavy Duty Rivet Aircraft Tools 5 16 Nose Rivet Model Cherry Rivet Gun Cherrylock Blind Fastener Tungsten Bucking Bar Cherrymax Huck Pneumatic Aircraft Rivet Huck 200 Aircraft Tools 7 2X Rivet Gun Olympic Allfast Aircraft Tools Atlas Copco Dayton Pneumatic Aircraft Tools Aro Aircraft Tools Jiffy Rivet Nut Rivnut Tool Chicago Pneumatic 4X Rivet Gun Pneumatic Air Rivet Gun Rivet Squeezer Aircraft Tools Apt Pop Rivetool Aircraft Tools Dotco Pop Rivet Pneumatic Hydraulic Rivet Gun Tools Ingersoll Rand Avc Tools Bucking Bar Huck Rivet Rivet Puller Gun Aircraft Tools 10 Huck Gun Roller Ratchet Aircraft Aviation Tools Aircraft Tools 8 Aircraft Sheet Metal Tools Riveting Machine Pneumatic Air Rivet Cp-214 Rivet Pneumatic Rivet Puller Cp 351 Rivet Set 498 Shank 1 4 Nose Huck 2025 Roller Ratchet Aircraft Tools Aircraft Tools Sioux Rivet Pulling Head Nose Cherry Max Rivet Cleco Runner Chicago Pneumatic Cp Hi Shear Nose Piece Aircraft Hydraulic Blind Rivet 3 16 Air Head Aircraft Pneudraulic Rivet Cherry G784 Aircraft Tools 4 Offset Rivet Pulling Head Nose Piece Aircraft Tools 3 Fsi Chicago Pneumatic Cp214 Rivet Shaver Alligator Squeezer American Pneumatic Jiffy Uat 5 Tools Huck Countersink Cages Cupped Rivet Set Aircraft Tools Rockwell Pneumatic Lockbolt Fastener Installation Textron Aerospace Aircraft Rivet Gun Straight Pulling Head 9 32 Nut Runner Collar Runner Prg 510 Fsi Pt-100 Hydraulic Pop Rivet Aircraft Tools 4 Pc Rivet Bucking Bar Aircraft Tools 1 Ati Snap On Tools 3 United Air Tools Air Rivet Gun Prg 510 Pneumatic Right Angle Pulling Head Electric Rivet Gp Lockbolt Rivet Gun Aircraft Rivit Gun Cherrylock Rivet Rivet Set Air Riveter Huck 200 Rivet Tools 5 32 Jiffy Air Tools Emhart Teknologies Angle Rivet Hi Lok Collar Bucking Bar Set Avc 13 Hi Lok 1X Rivet Cherry Textron Aerospace
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
395
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Crestview,FL,USA
$
55
Buy It Now
$14.05 Shipping
Condition: Used
Location: Wells,ME,USA
For sale in this listing is a U.S. Aerospace Tools 3X Pneumatic Aircraft Rivet Gun Air Riveter Tool. Made in the USA. Tested and fully functional. No ... morepersonal engravings. Shows normal wear from use not abuse. Does not include retail packaging or owners manual. Items pictured are exact items winning bidder will receive. We usually ship items within 1 business days after auction has been paid for. This Auction ships to lower 48 U.S. residents only. We will pay return shipping if the reason for the return was from an error in the listing that was the seller's mistake or if we ship the wrong item. If the return is for a reason other than a mistake by the seller. Then the buyer will be refunded the price of the item but not the original shipping charges and not the return shipping costs. If an item has free shipping either as a'Buy it Now' or'Auction' listing and it is returned buyer will be refunded original amount less our original shipping costs. If the error is our fault we will gladly cover all costs. Original and return. We over pack all items with packing material to ensure safe shipping. We sell hundreds of items and do our very best to describe items as accurately as possible. Please feel free to contact us with any questions.
$
350
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
335
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
144
Buy It Now
$19 Shipping
Condition: Used
Location: Burlington,WA,USA
$
370
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
895
Buy It Now
$0 Shipping
Condition: Used
Location: Crestview,FL,USA
$
335
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
1,488
Buy It Now
$11 Shipping
Condition: Used
Location: Germantown,TN,USA
$
335
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
390
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
300
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
370
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
380
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
899.95
Buy It Now
Free Shipping
Condition: New – Open box
Location: Las Vegas,NV,USA
$
20.99
Buy It Now
$0 Shipping
Condition: New other (see details)
Location: Denver,CO,USA
$
335
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
399
Buy It Now
$11.88 Shipping
Condition: Used
Location: San Antonio,TX,USA
$
39
Buy It Now
$13.95 Shipping
Condition: For parts or not working
Location: Fort Worth,TX,USA
$
335
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
335
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
335
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
3,000
Buy It Now
Free Shipping
Condition: Used
Location: Farmingdale,NY,USA
Chicago Pneumatic Riveter Model CP450/ 24" throat x 8" High Heavy Frame Call Jim for more info 7146121480
$
279.99
Buy It Now
$0 Shipping
Condition: Used
Location: San Antonio,TX,USA
$
205
Buy It Now
$0 Shipping
Condition: Used
Location: Gordonville,TX,USA
$
380
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
20.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Denver,CO,USA
$
179.99
Buy It Now
$15 Shipping
Condition: Used
Location: Las Vegas,NV,USA
This is a Huck 175 used pneumatic riveter. This is a used riveter that NOT working. It is used and does show some use wear signs. Now it is not working. ... moreTHIS TOOLS IS FOR PARTS OR REPAIR. Please see the photos for further details. Paypal payments accepted. Payment due within 4 days of auction ending. Unless othwise requested! Ebays Unpaid item Assist will automatically open a case after 14 days. To avoid this. Pay or cancel your purchase before UPI closes the case. Ships out Fast. Usaully within 1 business day- I insure all Items over $100- We do combine shipping upon request. Must request before payment! If requested after payment only partial refund ddo to ebay charging on shipping fees! ALL SALES ARE FINAL. UNLESS THERE WAS A PROBLEM WITH THE WAY THE ITEM WAS LISTED OR DESCRIBED. 14 day money back return policy. If your happy with your purchase please leave a 5-star feedback or Contact us to Resolve any Issues. WE HAVE BEEN SELLING ON EBAY FOR MANY YEARS. THIS IS A NEW ACCOUNT FOR US! WE STRIVE TO DESCRIBE EVERYTHING AS ACCURATE AS POSSIBLE. MOST ITEMS ARE USED, UNLESS OTHER WISE STATED. IF THERE IS A PROBLEM PLEASE CONTACT US FIRST BEFORE LEAVING FEEDBACK! WE WOULD LOVE TO RESOLVE THE PROBLEM FIRST! THANK YOU! LONG TIME eBAY SELLER. WITH KNOWLEDGE OF CUSTOMER SACTISFACTION! STARTING A NEW VENTURE WITH A NEW ACCOUNT! DOING THE BEST WE CAN TO PROVIDE QUILITY USED TOOLS, AND ANYTHING ELSE WE CAN FIND, TO NEW OWNERS! The Best way to contact us is through eBay Messages with any questions or concerns. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-148d913e55a-0x115-
$
325
Buy It Now
$0 Shipping
Condition: New
Location: Locust Grove,GA,USA
SIOUX TOOLS SRS10P21-8 Signature Series Pistol Grip Aviation Aircraft Tools Rivet Shaver Grab a Great Deal on a pre-owned! NO RESERVE! Condition: This ... moreSioux Tools Rivet Shaver is in good used condition. It has been tested and is fully functional and works just as it should. It does show signs of use and wear so please see all the photos and judge for yourself. There are scuffs. Scratches along with some identifiers such as numbers& Letters painted and engraved on it but, the unit still works great! See Photos for details. All Photos are of the actual item/s that you are buying. What you see is what you get! Item Description: This model SRS10P21-8 from Sioux Tools features a full 1 horse power motor and operates at 21.000 rpm to make shaving rivets a breeze! The Signature Series ergonomic housing features a molded grip and is designed for maximum operator comfort. Features: 8-5/8" long Weighs just 2.7 lbs! Uses industry standard 1/4-28 threaded rivet shaver bits(sold separately) Shaving" depth is adjustable in increments of.001" for very precise shaving of the rivet head without damaging the surrounding aircraft skin. MADE IN THE USA by Sioux Tools(a division of Snap-On! Contact me if you have any Questions! Good Luck& Happy Bidding! W
$
330
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
335
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
149.99
Buy It Now
$15 Shipping
Condition: Used
Location: Las Vegas,NV,USA
$
75
Buy It Now
$0 Shipping
Condition: For parts or not working
Location: Yorktown,VA,USA
$
249
Buy It Now
$14 Shipping
Condition: Used
Location: Canyon Lake,TX,USA
$
244.99
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
123
Buy It Now
$16 Shipping
Condition: Seller refurbished
Location: Signal Hill,CA,USA
$
9.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Denver,CO,USA
$
335
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
199.95
Buy It Now
$14.95 Shipping
Condition: Used
Location: Nappanee,IN,USA
$
20.99
Buy It Now
$0 Shipping
Condition: New other (see details)
Location: Denver,CO,USA
$
199
Buy It Now
Free Shipping
Condition: Used
Location: Clermont,GA,USA
$
9.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Denver,CO,USA
$
149.99
Buy It Now
$9.88 Shipping
Condition: Used
Location: San Antonio,TX,USA
DOTCO 15CFS60-95 PNEUMATIC 29.000 RPM RIVET SHAVER-DOTCO MODEL 15CFS60-95 PNEUMATIC RIVET SHAVER-RPM: 29.000-WEIGHT: 2.50 LBS-MOTOR RUNS SMOOTH-HAS A ... moreTHREADED HEAD THAT ACCEPTS INDUSTRY STANDARD 1/4 X 28 SHAVER BITS-HAS A SMALL SANDED MARK WHERE A MILITARY ETCHED NUMBER WAS REMOVED(cosmetic) COMES WITH FOOT WHICH ALSO HAS A SMALL SANDED MARK-IN VERY GOOD CONDITION! COMES EXACTLY AS PICTURED GREAT FIND!
$
299.99
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
87.99
Buy It Now
$0 Shipping
Condition: Used
Location: Ventura,CA,USA
Chicago Pneumatic CP214 Rivet Squeezer CP-214 Riveter Aircraft Air Tool. Works good.
$
249.95
Buy It Now
$14.95 Shipping
Condition: Used
Location: Nappanee,IN,USA
$
4.95
Buy It Now
$9 Shipping
Condition: New – Open box
Location: Signal Hill,CA,USA
$
22
Buy It Now
$12 Shipping
Condition: Used
Location: Riverdale,GA,USA
$
22.89
Buy It Now
$0 Shipping
Condition: Used
Location: San Tan Valley,AZ,USA
$
31.95
Buy It Now
$3.95 Shipping
Condition: Used
Location: San Antonio,TX,USA
$
9.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Denver,CO,USA
$
250
Buy It Now
$0 Shipping
Condition: Used
Location: Chicopee,MA,USA
$
9.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Chino Hills,CA,USA
$
425
Buy It Now
Free Shipping
Condition: Used
Location: Los Angeles,CA,USA
$
185
Buy It Now
$0 Shipping
Condition: Used
Location: Naperville,IL,USA
$
182.93
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
35
Buy It Now
$4.5 Shipping
Condition: Used
Location: Lynnwood,WA,USA
$
76.95
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
9.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Denver,CO,USA
$
133
Buy It Now
$15 Shipping
Condition: Used
Location: Signal Hill,CA,USA
1 2 3
 In 

Past Items  
 
UP for sale. Used Cherry G-743 is a heavy duty hydro-pneumatic rivet tool designed to place up to 1/4" steel/stainless steel breakstem rivets including Monobolt and Interlock. Posted with
This is a very nice Chicago Pneumatic 351A rivet squeezer. It has a very smooth action and throttle. It uses standard 3/16" 187) shank rivet squeezer sets. It comes with a 9" deep heavy duty jaws. The end of the jaws has some sanding but it in no way effects the operation or strength of the tool. It is pictured. This is the best large squeezer you can buy and the one all the others copied. It sells for over $3000 new. This tool has been lightly used and well taken care of. It will last you for years. It have a couple of light engravings.
D-K PRODUCTS 4X PNEUMATIC RIVET HAMMER/ GUN DV-1148-THIS RIVET GUN DOES NOT WORK! WHEN THE TRIGGER IS SQUEEZED NOTHING HAPPENS-UNSURE AS TO WHAT THE PROBLEM IS-NUT FITTING BY THE AIR FITTING CONNECTION IS STRIPPED SOME ON PART OF THE EDGES-MADE BY D-K PRODUCTS INC. PNEUMATIC PORTABLE RIVETING HAMMER/ GUN MODEL DV-1148-401 SHANK-SIZE: 4X-COMES AS PICTURED-HAS SOME GRIND MARKS WHERE MILITARY ETCHED#S WERE REMOVED-COSMETIC NOT AFFECTING THE TOOL-COMES EXACTLY AS PICTURED-AGAIN WE DO NOT KNOW WHAT THE ISSUE IS WITH THIS RIVET GUN-WE HAVE EXPLAINED THE ISSUES WITH THIS TOOL TO THE BEST OF OUR KNOWLEDGE-MADE IN THE USA! SELLING"AS IS" FOR REPAIR! NO RETURNS! GREAT FIND!
CHERRY 702 LIGHTWEIGHT PNEUMATIC RIVET GUN W H702 PULLING HEAD-THIS RIVET GUN DOES NOT WORK! WHEN CONNECTED TO AIR. AIR JUST COMES OUT THE HOLE ON THE FRAME(see last pic) WE DO NOT REPAIR AIR TOOLS SO WE ARE UNAWARE AS TO WHAT NEEDS REPAIR! CHERRY MODEL 702 LIGHTWEIGHT AIR RIVET GUN-COMES WITH H702 PULLING HEAD-WEIGHT: 3.60 LBS-COMES EXACTLY AS PICTURED-NO RETURNS ON THIS ITEM-SELLING FOR REPAIR GREAT BUY!
This auction is for a Vintage Cleveland Pneumatic Tool CO Compression Riveter. It is used and shows lots of wear, it is marked on top: STYLE 13 B" it measures 37 cm long, I tested it on a small air compressor and it is working, it closes with a lot of pressure but it still may need to be serviced because it is old. You will receive the actual items shown in the pictures. Buyer is responsible for all shipping fees. Shipping will be $24.00 to anywhere in the continental USA, delivery confirmation is included with the shipping.
THIS IS A REALLY NICE POWERFUL CP-214 CHICAGO PNEUMATIC ALLIGATOR RIVER SQUEEZE THE SQUEEZER LOOKS AND WORKS GREAT IT HAS FULL POWER AND COMES WITH 14 VARIOUS SQUEEZE SETS. 40, 30, 21& FLUSH) SHIPPING WILL BE FREE ANYWHERE IN THE USA Posted with
i have flat faced. Dished, and misc.stuff on far right
S10 Atlas Copco Model: RRH06P 7 Bar 100Psi We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 ... morelbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
Up for bid is a 7X rivet gun. Ingersall Rand. This gun is not for'sissy's' If you are shooting 1/4" rivets, this gun will do it without breaking a sweat. Very nice trigger pull also. Works great but I am no longer doing heavy checks or repair station work. 498 shank and the spring is included. You will need the spring. No international shipping Any questions or concerns please contact me.
AN470 set with.187 shank. Comes only with pieces shown. Missing many pieces. In fitted case. Buyer pays 7.70 USPS shipping. I accept returns. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ee0c715cf-0x104-
AN470 set in very good used condition with.187 diameter shanks. Cupped and flush. In fitted case. One flush piece is missing. Buyer pays 8.80 USPS shipping. I accept returns.
Complete AN470 set with.187 diameter shanks in excellent used condition in fitted case. Cupped and flush. Buyer pays 8.80 USPS shipping. I accept returns.
Works Great. Rivet squeezer.
This auction is for an Chicago Pneumatic 4X rivet gun. Model# CP4444 RUTAB. This item is used, but in excellent working condition. CP Rivet Guns set the standard for all others to follow. These excellent tools offer the power and control needed to uniformly drive aircraft rivets. Features one of the best"teasing" trigger/throttle in the industry for precise control. Uses standard.401 rivet sets. This item is offered with a money back guarantee. If within 5 days of receiving this item. You find that it is not in the condition described, return it for a full refund, less shipping.
Listing is for Pneumatic Rivet gun Aircraft Aviation Tool(Listing#2) Unit does not have retainer ring. Or the shaft bucker that the retainer ring holds, unit shows signs of wear such as rubs, scuffs, scratches, grinding on unit. photos help with your visual questions. Unsure exactly what brand or model it is, it does look like the pneumatic rivet gun i have on listing#1, which i also provided the#1 rivet gun photo on this listing as well for reference purposes of the Ingersoll-rand AVC12, Once again usure exactly what brand or model it is, although it is the same approximate dimensions stated on the#1 photo, 1 listing. Please use your own discretion from photos provided. Tested with compressor in two segments of four seconds each time, motions very good and strong, with this method of testing as i do not have the retainer ring or a shaft ... morebucker, It is the only way i could test it, seems to be working as should. I do my best to describe all my items best to my knowledge, Ask questions and i will do my best to answer them for you. Buy with confidence, I offer 14 day return policy as i could not test the unit with the retainer spring and the shaft bucker. Unsure what?X power it is, my assumption is that it is a 2X power, just my assumption, please look at dimensions giving on photo as to maybe help figure out what?X it could be. Units were purchased at an estate sale, Ask questions and i will do my best to answer them for you. Look into my other aerospace tools listings. Please have a verified and confirmed paypal account and a rating of 10 or higher prior to purchasing.
Listing is for a USATCO Pneumatic Rivet gun Aircraft Aviation Tool(Listing#6) Unit does not have retainer ring. Or the shaft bucker that the retainer ring holds, unit shows signs of wear such as rubs, scuffs, scratches, grinding on unit. photos help with your visual questions. Unsure exactly what brand or model it is, It does show as shown on photo it has a 17 and a 5X by handle area, the 5X i would assume is the power of the riveter and on label as shown on photo shows USATCO Tools Air World. Once again usure exactly what brand or model it is, Please use your own discretion from photos provided. Tested with compressor in two segments of four seconds each time, motions very good and strong, with this method of testing as i do not have the retainer ring or a shaft bucker, It is the only way i could test it, seems to be working as should. I ... moredo my best to describe all my items best to my knowledge, Ask questions and i will do my best to answer them for you. Buy with confidence, I offer 14 day return policy as i could not test the unit with the retainer spring and the shaft bucker. Unsure exactly what?X power it is, my assumption is that it is a 5X power, as shown on photo, just my assumption, please look at dimensions giving on photo as to maybe help figure out what?X it could be. Units were purchased at an estate sale, Ask questions and i will do my best to answer them for you. Look into my other aerospace tools listings. Please have a verified and confirmed paypal account and a rating of 10 or higher prior to purchasing.
Lightly used CP 214 style tandem cylinder rivet squeeze in perfect working condition. CP riveters are the best on the market for serious daily use and this model sells for over $2000. These are found in most large aircraft production facilities. There is some markings from previous owner. This riveter has no problem squeezing 3/16" AD rivets and 5/32 titanium. It may do even larger rivets depending on material type. Tandem cylinder squeezers have twice the compression force than a single.
Used APT Rivet squeezer compression riveter alligator/ A type in good working condition. Tandem cylinders give twice the squeeze force of single cylinders. 2 1/4" throat depth. This squeeze has custom(machine shop made) inserts installed to accept 3/16" standard rivet dies or simply drive out the inserts to install 1/4" rivet dies.
See Pics. Squeezers perform good(no leaks) with 5/32 rivets AD. I only had 6/32 DD rivets and machine started to but did not crush it. This will handle a 5/32 AD rivets and smaller just fine. Dies not included.
Excellent used condition Chicago Pneumatic micro rivet shaver. No Model# and RPM info on the body. Approximetely 20.000 RPM. It comes with one 1/2" shaver bit. Tested and works great. What you see are the actual pictures. Shipping is just $9.50 within USA. Canada $28.00. All other international buyers pay for actual shipping cost. I will combine shipping if you buy more than one item from me. please check out my other ebay items. On Mar-04-06 at 12:37:54 PST. Seller added the following information: On Jul-02-08 at 17:56:32 PDT. Seller added the following information: Powered by The free listing tool. List your items fast and easy and manage your active items.
For sale is this Atlantic Air Pneumatic rivet squeeze. This is a Model 444 and is designed for a stationary mounted position. It comes with the adjustable mounting hardware as show in the photo. All you need is a post or bench to mount it to. The supplied mounting hardware allows this squeeze to be rotated to any position which makes it a very versatile setup and indispensable for any serious production/fabrication shop. This unit comes with the foot controller(shown) that is air actuated so there are no hassles with adjusting cables like many other models. The jaws accept 3/16" sets and has a 9" reach and is 3 1/4" deep. The overall length of this unit is 28" This unit is nearly new and in excellent condition and ready for use. You will not find one like this for less money anywhere else! Compare this to a new unit! This ... morerivet squeeze and accompanying hardware has been tested and is in perfect working condition. FREE expedited shipping within continental US Please read before agreeing to purchase from off_trac We do not ship to A.P.O. F.P.O. addresses, please make sure you have an accessible residence or business address. In addition. We do not ship to Alaska, Hawaii, Guam, or Puerto Rico residents. eBay Feedback Feedback will be given in return for your feedback. Your satisfaction is important to us. If you do not feel comfortable giving us a 5-star positive feedback rating, please contact us before leaving any feedback so that we can make things right. Payment All payments are expected within 3 days of auction closing. If payment cannot be made within that time period you must contact me and make arrangements before bidding. Shipping Shipping to US ONLY NO INTERNATIONAL SHIPPING, THIS INCLUDES MEXICO AND CANADA We do not ship to A.P.O. F.P.O. addresses, please make sure you have an accessible residence or business address. In addition. We do not ship to Alaska, Hawaii, Guam, or Puerto Rico residents. All orders will ship out within 2 business days(usually 24 hours) from date payment is rece
This is a FSI model PT-100 pneumatic riveter. It will pull anything from Cherrymax to rivnuts with the proper heads. It does not extend and release when the trigger is pressed or retract after it cycles. It is made by FSI. Sold AS-IS. A rebuilt kit is about $60 from FSI.
Chicago Pneumatic 2X Rivet Gun Jiffy Dotco Cleco Aircraft Automotive Air Tools Chicago Pneumatic 2X rivet gun In excellent working condition. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14157193773-0xfe-
This is a Olympic RV51GA riveter. It pulls MS style Cherry rivets. It works great with no leaks.
This rivet gun works like new. It is made by Chicago Pneumatic. The model number is CP4444RUTAB. It has the best feathering trigger you can get on a rivet gun. It uses regular.401 shank sets. This tool is made in the USA. Built to last for years unlike the import junk being sold. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1419db2160b-0xff-
This is a Chicago Pneumatic CP0214 ENFEL tandem cylinder rivet squeezer. It works like new. No grinding or sanding on the tool. It is surplus from Boeing. It has 2-1/4" jaws and uses standard 3/16" sets. This is the best quality rivet squeezer made bar none and the one all others copied. Sells new for over $2500.
For sale in this listing is a Chicago Pneumatic CP-4444 RUSAB Pneumatic Aircraft Rivet Gun Air Hammer Tool. Made in the USA. Tested and fully functional. No personal engravings. Shows signs of use that can be seen in pictures. Does not include retail packaging or owners manual. Items pictured are exact items winning bidder will receive. We usually ship items within 1 business days after auction has been paid for. This Auction ships to lower 48 U.S. residents only. We will pay return shipping if the reason for the return was from an error in the listing that was the seller's mistake or if we ship the wrong item. If the return is for a reason other than a mistake by the seller. Then the buyer will be refunded the price of the item but not the original shipping charges and not the return shipping costs. If an item has free shipping either ... moreas a'Buy it Now' or'Auction' listing and it is returned buyer will be refunded original amount less our original shipping costs. If the error is our fault we will gladly cover all costs. Original and return. We over pack all items with packing material to ensure safe shipping. We sell hundreds of items and do our very best to describe items as accurately as possible. Please feel free to contact us with any questions.
For sale in this listing is a U.S. Aerospace Tools 3X Pneumatic Aircraft Rivet Gun Air Riveter Tool. Made in the USA. Tested and fully functional. No personal engravings. Shows normal wear from use not abuse. Does not include retail packaging or owners manual. Items pictured are exact items winning bidder will receive. We usually ship items within 1 business days after auction has been paid for. This Auction ships to lower 48 U.S. residents only. We will pay return shipping if the reason for the return was from an error in the listing that was the seller's mistake or if we ship the wrong item. If the return is for a reason other than a mistake by the seller. Then the buyer will be refunded the price of the item but not the original shipping charges and not the return shipping costs. If an item has free shipping either as a'Buy it ... moreNow' or'Auction' listing and it is returned buyer will be refunded original amount less our original shipping costs. If the error is our fault we will gladly cover all costs. Original and return. We over pack all items with packing material to ensure safe shipping. We sell hundreds of items and do our very best to describe items as accurately as possible. Please feel free to contact us with any questions.
USATCO 17-200B STUBBY PNEUMATIC RIVET GUN W SETS-USATCO MODEL 17-200B JIFFY TYPE/ STUBBY PNEUMATIC RIVET GUN-BPM: 2700-COMES WITH PICTURED STUBBY SETS& SPRING-IN EXCELLENT CONDITION-TESTED AND THIS RIVET GUN WORKS GREAT-RIVET GUN. SPRING AND SETS COME EXACTLY AS PICTURED GREAT FIND!
Up for auction is a Chicago Pneumatic recoiless rivet gun# RUTAKR. Accepts.401 sets. This is a 3X rivet gun. Works well! Does have previous owners engravings. I do combine shipping. I ship via USPS flate rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale!
For sale is this American made Chicago Pneumatic Aligator Squeeze Riveter. This Compression rivet squeeze has 3” deep"Aligator" jaws that open to 1.75" without sets) and accepts standard squeezer rivet sets with.187 shank. This rivet squeezer is in great working condition and shows some wear but over all is in good condition! FREE expedited shipping within continental US. Please read before agreeing to purchase from off_trac We do not ship to A.P.O. F.P.O. addresses, please make sure you have an accessible residence or business address. In addition. We do not ship to Alaska, Hawaii, Guam, or Puerto Rico residents. eBay Feedback Feedback will be given in return for your feedback. Your satisfaction is important to us. If you do not feel comfortable giving us a 5-star positive feedback rating, please contact us before leaving ... moreany feedback so that we can make things right. Payment All payments are expected within 3 days of auction closing. If payment cannot be made within that time period you must contact me and make arrangements before bidding. Shipping Shipping to US ONLY NO INTERNATIONAL SHIPPING, THIS INCLUDES MEXICO AND CANADA We do not ship to A.P.O. F.P.O. addresses, please make sure you have an accessible residence or business address. In addition. We do not ship to Alaska, Hawaii, Guam, or Puerto Rico residents. All orders will ship out within 2 business days(usually 24 hours) from date payment is received. I will gladly combine shipping. E-mail and let me know you’re still bidding and then again when you are finished(3 day’s max. I will then send an adjusted invoice. All auctions that are closed on a Friday. Weekends or any Post Office holidays will not be processed until the next working day. This means if you make a payment on Friday and the following Monday is a holiday observed by the USPS. Your parcel will ship on Tuesday. Terms of Sale Please ask any questions BEFORE BIDDING. I will try to answer all emails in a timely manner but if you wait until the last day it’s possible I may not ha
INGERSOLL RAND AVC-13 PNEUMATIC RIVET GUN W SETS-INGERSOLL RAND AVC-13 PNEUMATIC RIVET GUN-COMES WITH PICTURED 0.401 SETS-TESTED AND THIS RIVET GUN WORKS GREAT-RIVET GUN AND SETS COME EXACTLY AS PICTURED GREAT FIND!
APT 4X PNEUMATIC RIVET GUN W SETS MODEL 400-APT 4X PNEUMATIC RIVET GUN-COMES WITH PICTURED 0.401 SETS-TESTED AND THIS RIVET GUN WORKS GREAT-JUST HAS PAINT CHIPPING AND SOME SANDED MARKS WHERE MILITARY ETCHED NUMBERS WERE REMOVED(cosmetic) RIVET GUN AND SETS COME EXACTLY AS PICTURED GREAT FIND!
HONSA HTO-13 PNEUMATIC RIVET GUN W SETS-HONSA MODEL HTO 13 PNEUMATIC RIVET GUN-ACCEPTS 0.401 SHANK SETS-BLOWS PER MINUTE: 1725-HAS A LIGHT SANDED MARK WHERE A MILITARY ETCHED NUMBER WAS REMOVED(cosmetic) COMES EXACTLY AS PICTURED W SETS SHOWN-TOP OF THE LINE MADE IN THE USA! SELLS NEW FOR $873.00! IN VERY GOOD CONDITION GREAT FIND! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-143afc17337-0xe9-
She hits hard and smooth. Very controllable. Good used gun. Bid with confidence. I strive for a 100 percent rating.
Neat old tools. At least 50 pieces. D-K Products Air Riveter no spring holder and Black& Decker air drill. Lots of rivet tools and bucking bars plus others. Both hammer and drill do work when I hooked up to my small air compressor. Don't know much about these so look at photos and ask questions. In good to fair used condition. Good one to add to a collection or use. Items I sell are from local sales and just wiped off and not used by me. Hard item to find for a collection. See photos for condition. Sold as is so please ask questions before bidding. Please ask questions before bidding. I combine shipping to save you money when I can but not always can if box will not allow it. Shipping in USA is $18.00. No International bids on this auction. Payment must be received within 4 days of auction ending or item will be re-listed. Payment ... moreby Paypal. All items located in Wichita Falls. Texas On Aug-18-03 at 01:56:33 PDT. Seller added the following information: After purchasing. Pay instantly with your credit card through PayPal!
CHICAGO PNEUMATIC CP4447 RUSAB 5X BIG BORE AIR RIVET GUN SET-THIS SALE INCLUDES THE RIVET GUN. SETS PICTURED AND SPRING! CHICAGO PNEUMATIC MODEL CP4447 RUSAB PNEUMATIC RIVET GUN-SIZE: 5X BIG BORE STYLE-0.498 SHANK SETS-SET COMES EXACTLY AS PICTURED! TESTED AND WORKS GREAT! THESE SELL NEW FOR WELL OVER $1.000.00! GREAT BUY!
Slightly used like new rivet gun. Nice durable tool.
HI YOU ARE BIDDING ON A USED CHERRY TEXTRON CHERRYMAX G784 RIVET PULLER GUN. EVERYTHING WORKS GREAT WITH NO PROBLEMS PULLING& IS IN GOOD OVERALL CONDITION(SEE PICS) ALSO HAS AN ADJUSTER ON THE BACK FOR STEM BREAK POSITION. AUCTION INCLUDES WHAT YOU SEE IN THE PICTURES. THIS MILITARY SURPLUS AVIATION POP RIVET GUN RETAILS FOR $3000+(NEW) I'M STARTING THE BID OUT@ ONLY $.01 W/ NO RESERVE! THANK YOU FOR LOOKING AND GOD BLESS! CHECK OUT MY OTHER AUCTIONS! I REQUIRE PAYMENT WITHIN 3 DAYS OF END OF AUCTION. BUYER IS RESPONSIBLE FOR ALL S&H CHARGES. SORRY I DO NOT SHIP TO P.O. BOXES. I HAVE LISTED THIS AUCTION TO THE BEST OF MY ABILITY. IF YOU HAVE ANY QUESTIONS FEEL FREE TO ASK AND I WILL ANSWER THEM THE BEST I CAN. THANKS KEYWORDS: SIOUX. SNAP-ON, SNAPON, STARRETT, ATLAS COPCO, CHCAGO, INGERSOLL RAND, MILWAUKEE, MAKITA, AVIATION, AEROSPACE, ... moreAIRCRAFT, AUTO, VEHICLE, MECHANIC, DESOUTTER, RIVET, CLECO, CHERRYMAX, STRUCTURES, SHEETMETAL, COMPOSITE, ATS, DRILL, PNEUMATIC, AIR TOOL, DOTCO, HI-LOK, CRAFTSMAN, MACHINIST, MACHINING, METAL, TOOLING, TOOL, INSPECTION, MANUFACTURING, PRECISION, RATCHET, WRENCH,
Up for auction is a American Pneumatic Tool rivet squeezer. Model# 72* I cannot see the last didget. I put shop air on this and it cycled just fine, I have no fasteners to test with. Happy bidding! I do combine shipping. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! Posted with
Up for auction is an Ingersoll Rand pneumatic rivet gun. It is AVC 13(4X) Variable speeds, cold rivet cap. dia. 1/4" piston stroke 4" blows per min. 1725, bore 9/16" and it takes.401 shank rivet sets. I had an A&P Mechanic oil and test the gun.It works great. As far as looks go. It shows normal wear. This riveter belonged to a person that worked for Boeing& McDonnell-Douglas.
These pneumatic impact hammer guns are in great condition. Cleco gun is really close to new! ATI bits or attachments are in guns and 4 additional. I can provide ATI numbers if desired. These guns run very well!
Up for auction is a Chicago Pneumatic 4X rivet gun model# CP4444 RUTAB. Accepts.401 sets, works well! Item does have some previous owners engravings on it. I do combine shipping. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale!
HERE WE HAVE BIG LOT OR PNEUMATIC RIVET SHANKS INSERTS- SQUEEZER DIMPLE DIES- AIRCRAFT TOOL. PLE ASE SEE THE PICTURE TO SEE THE CONDITION TO THE ITEM. THE ITEM YOU SEE N THE PICTURE IS THE ITEM YOU WILL BE RECEIVING. ONLY WHAT IS PICTURE IS WHAT IS INCLUDED IN THE AUCTION. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACCURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNESDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY ... moreNO INTERNATIONAL TRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES.
PNEUMATIC POP RIVETER PRG 510 U.SM. COPR. AIRCRAFT AEROSPACE POP RIVET GUN THE MANUAL CAN BE SEEN AND PRINTED ON-LINE JUST GOOGLE pgr510 pneumatic pop riveter THIS TOOL HAS BEEN CHECK WITH AIR. THE TOOL CYCLES WHEN THE TRIGGER IS ACTIVATED, BUT HAVE NO RIVETS TO FULLY TEST THE RUBBER BOOT IS TORN. AS CAN BE SEEN IN THE PICTURES PRG-510-52A IS THE RIVET HEAD THAT IS IN THE TOOL
Up for auction is a Sioux rivet squeezer. Model# SZEA 7030, works well but I have no fastener to test with. 3/16" hole size for sets. Happy bidding! I do combine shipping for US buyers ONLY. Buyers using the International Shipping program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! Posted with
This is Huck 175A used pneumatic riveter. This is a complete riveter that is in working condition. It is used and does show some use wear signs. It has 1 nose piece with it. We are not sure what size it is. This riveter is in working condition, and has been tested. The release sticks once in while, a quick push to the side of the trigger and it works. Please see the photos for further details. Paypal payments accepted. Payment due within 4 days of auction ending. Unless othwise requested! Ebays Unpaid item Assist will automatically open a case after 14 days. To avoid this. Pay or cancel your purchase before UPI closes the case. Ships out Fast. Usaully within 1 business day- I insure all Items over $100- We do combine shipping upon request. Must request before payment! If requested after payment only partial refund ddo to ebay charging on ... moreshipping fees! ALL SALES ARE FINAL. UNLESS THERE WAS A PROBLEM WITH THE WAY THE ITEM WAS LISTED OR DESCRIBED. 14 day money back return policy. If your happy with your purchase please leave a 5-star feedback or Contact us to Resolve any Issues. WE HAVE BEEN SELLING ON EBAY FOR MANY YEARS. THIS IS A NEW ACCOUNT FOR US! WE STRIVE TO DESCRIBE EVERYTHING AS ACCURATE AS POSSIBLE. MOST ITEMS ARE USED, UNLESS OTHER WISE STATED. IF THERE IS A PROBLEM PLEASE CONTACT US FIRST BEFORE LEAVING FEEDBACK! WE WOULD LOVE TO RESOLVE THE PROBLEM FIRST! THANK YOU! LONG TIME eBAY SELLER. WITH KNOWLEDGE OF CUSTOMER SACTISFACTION! STARTING A NEW VENTURE WITH A NEW ACCOUNT! DOING THE BEST WE CAN TO PROVIDE QUILITY USED TOOLS, AND ANYTHING ELSE WE CAN FIND, TO NEW OWNERS! The Best way to contact us is through eBay Messages with any questions or concerns.
Lightly used on aircraft for 3 years. VERY good condition(tested and in great working condition) Air regulator installed as well as quick change spring and flush set. Quick change spring and flush set added by me, you won't get that on a new gun! The TAYLOR 3X hits at 2100 blows per minute and has a 3/16" aluminum rivet capacity. 7-5/16" long, weighs 2-1/3 lbs. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1456c084721-0x103-
Vintage Aircraft Corner Hammer CP 459 Chicago Pneumatic rivet gun riveter One owner. My father who was an aircraft sheet metal mechanic at the Miami International Airport for 40+ yrs and is now 90 yrs old. He took care of his tools. Rivet Gun is in Excellent working condition. Let me know if you have any questions. SHIPPING: Shipping and handling will be $10.00 for this auction. All shipping is sent via the United State Postal Service Priority Mail. Orders will be shipped out on the Monday only. Following payment. Payment must be received by 12 noon Sunday in order to be shipped out the next day. Otherwise it will be shipped out the next Monday. One week later. PAYMENT: We accept PAYPAL ONLY with verified/confirmed address. Payment is due 72 hours after auction ends. All sales are final! QUESTIONS: Please contactus through email if you have ... moreany questions. Please checkout our other auctions!
This is a Desoutter Chicago Pneumatic model CP4450-4 recoilless 4X rivet gun. It is very lightly used. It has a great Feathering trigger. New list is about $1000 from Brown Tool.
Desoutter CP 4X Recoiless Rivet Gun This rivet gun retails over $1000 new. It is designed so that vibration and shock are greatly reduced during use- resulting in vastly improved operator comfort versus traditional rivet guns. Model: CP4450-4- 401 shank- Capacity: 1/4" aluminum rivets- 1740 BPM- Excellent. Barely used condition- There are some sanding marks where ID#s have been removed. This tool operates perfectly- Comes with the American made accessories shown: 2 retaining springs- 1 bucking bar- 6 rivet sets(1/4. 3/16, 5/32, 1/8, 3/32, flush) If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
auction is for one pneumatic riveter rivetking zt 6000 3/16 rivet head. i dont know much about this kind of tool. Please visit kingrivet wesbsite for technical informations. engraving number on riveter head. Can be see in picture item is used. Was tested and work perfectly.
SIGN UP FOR OUR NEWS LETTER TO RECEIVE EMAILS ON OUR NO RESERVE AUCTIONS BOLLHOFF PNEUMATIC RIVNUT TOOL WE HAVE TWO OF THESE FOR SALE THIS AUCTION IS ONLY FOR ONE SHIPPING IS ONLY $20 ANYWHERE IN THE USA This can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Machine is being sold as is. The specs on this machine are subject to buyers inspection We have Excellent feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other HEAVY EQUIPMENT. MACHINERY, INDUSTRIAL EQUIP/PARTS PLUS MUCH MORE on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check
Atlas Copco Top-of-the-line Air tool Rivet Hammer Chisel Super powerful P/N RRH12P NPT Recoiless-Air Vibration dampened You can also put chisels in it. Video
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge This item is in good used working condition. You have our guarantee. Auction comes with everything that is pictured. DESCRIPTION The Huck Model 200 Installation Tool is designed to install a wide range of fasteners requiring a double action or single action installation tool. Power. Speed and accuracy are obtained through a pneumatic-hydraulic intensifier system powered by 90- 100 psi air pressure. SPECIFICATIONS FOR MODEL 200 Specifications shown in this document may be subject to change which may be introduced after publication. For the latest information always consult Alcoa Fastening Systems. Weight of 200: 10.5 lbs(4.8 ... morekgs) Air Pressure: 90- 100 psi(620- 690 kPa) Air Consumption: 18 CFM(0.009m3/s) Min. Stroke: 1-3/16" 30 mm) Normal 0 MicrosoftInternetExplorer4 LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES ARE GIVEN OR IMPLIED. ALL ITEMS CAME FROM A WORKING ENVIRONMENT WHAT YOU SEE IN THE PICTURES IS EXACTLY WHAT YOU WILL RECEIVE ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL NON FREIGHT ITEMS WILL BE SHIPPED WITHIN 1 BUSINESS DAY UPON RECEIPT OF PAYMENT. UNLESS OTHERWISE NOTED ALL FREIGHT ITEMS WILL BE SHIPPED WITHIN 3 BUSINESS DAYS RETURNS ARE SUBJECT TO A CASE BY CASE BASIS AND MUST BE WITHIN 7 DAYS OF RECEIVING THE SHIPMENT NEW YORK RESIDENTS ARE SUBJECT TO PAY 8.75% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE DON’T HESITATE TO ASK BEFORE THE END OF THE LISTING* THANKS– BUFFALO VINTAGE inkfrog terapeak. InkFrog Analytics.
Taylor Pneumatic 4X rivet gun with.401 Shank sets and collar remover Aircraft tools. SMHSC401B-4 AT100A-3-3/32 AT140A-5 = 2 AT101A-3-5/32 M120-19-3/16 Pictures show the actual item you are buying. Please only serious bidding. Please contact us if ship outside the US. Feel free to email with any questions. Thank you for looking. Please check my eBay store for more Items:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-146aa702f94-0x111-
Chicago Pneumatic CP-350 Specialty Aircraft Rivet Squeezer Riveter Riveting Tool CHICAGO PNEUMATIC SPECIALTY AUTOMOTIVE AIRCRAFT RIVETER TOOL! GOOD USED WORKING CONDITION! THROTTLE IS A BIT STICKY BUT NOT TOO BAD. COMES WITH THE FOLLOWING: MODEL NO. CP-350 S/N: H8398 JAW THROAT MEASURES 1.875" GAP X 2.125" REACH IN SIZE! THE TOOL MEASURES AROUND 13" IN LENGTH. USES YOUR STANDARD 1/4" NPT AIR FITTING! RUNS ON STANDARD 90 PSI! ACCEPTS 3/16" RIVET SETS! YOU CAN CUSTOMIZE THIS TOOL FOR MANY DIFFERENT JOB APPLICATIONS! THERE ARE DIFFERENT SIZE YOKES YOU CAN BUY AND RIVET SETS! WE MAY HAVE PARTS FOR THESE IN STOCK. EMAIL US WITH YOUR REQUEST! GREAT TOOL TO HAVE IN YOUR COLLECTION! MANY DIFFERENT APPLICATIONS FOR THIS TOOL USED IN THE AIRCRAFT AND AUTOMOTIVE INDUSTRY! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH ... moreUS! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! IF YOU FEEL SHIPPING IS TOO HIGH. JUST EMAIL US AND WE WILL TRY TO GET YOU A BETTER RATE. EBAY'S CALCULATOR DOES NOT ALWAYS SHOW THE BEST RATES! WE WILL GET YOU A PRICE THAT WILL MAKE YOU HAPPY! CHECK OUT OUR STORE FOR MORE GREAT DEALS! WE ARE POSTING NEW ITEMS EVERY WEEK! WE CARRY A LARGE INVENTORY OF ELECTRIC. PNEUMATIC, HYDRAULIC TOOLS& PARTS!
Central Pneumatic brand air powered rivet puller. In good condition and wasn't used very much. Thanks for looking!
U.S. INDUSTRIAL AVC-13 PNEUMATIC 4X RIVET GUN-U.S. INDUSTRIAL AVC-13 PNEUMATIC 4X RIVET GUN-USES STANDARD 0.401 SETS-NSN# 5130013584395-COMES EXACTLY AS PICTURED WITH SPRING GREAT FIND! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-146b0b1ab5e-0x10e-
Click to View Image Album Click to View Image Album Click to View Image Album You are bidding on a used Huck 350 aircraft riveter. Has seen a good bit of use but cycles good and draws. Typical paint scuffs. Sticker residue and some rust from Florida humidity. We have several of these and we are listing them in separate auctions if you need more than one. A great buy. Winner to pay 15.00 shipping. We will combine if you buy more than one. Thank you. Redbay4B. Florida residents to pay Florida Sales Tax. Please let us know if you are a Florida resident when you request a total. We now take Paypal for payment. We ONLY ship to Paypal confirmned addresses. WE SHIP FEDEX ONLY. NO PO BOXES OR INTERNATIONAL SHIPMENTS. Only FEDEX.NO International bidders. The shipping cost(if listed in the auction) is for Continental US bidders only(not Hawaii or Alaska) ... moreWe ship 3 times a week with FEDEX. On Monday Wednesday and Fridays. If payment has been received by 10am any of those days the items ships in that days run. Winning bidders please include item number and description. We often sell many lots of the same type of material and this helps to speed the shipping of your auction items. Also please include the correct ship to address with payment and whether you want the item insured or not. Thank you for bidding and please email with any questions prior to bidding. Please note: NO INTERNATIONAL SHIPMENTS. Purchaser is responsible for complying with all necessary U.S. Government rules. Licensing and regulations governing export of any material purchased from us. If we find out you are an International bidder we reserve the right to cancel your bids. We require signature on all shipments in excess of 250 dollars. Thank you. Payment I accept the following forms of payment: PayPal Shipping& Handling $14.00 UPS Ground FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
SIOUX 270A-4 PNEUMATIC 4X RIVET GUN-SIOUX 270A-4 PNEUMATIC 4X RIVET GUN-USES STANDARD 0.401 SETS-THIS TOOL IS MILITARY SURPLUS AND HAS SOME LIGHT SANDED MARKS WHERE ETCHED NUMBERS WERE REMOVED(cosmetic) MOTOR RUNS STRONG-COMES EXACTLY AS PICTURED GREAT FIND!
Excellent used condition Allfast RV30GB pneumatic rivet puller. Tested and works good. No pulling head will be included. For USA buyer only. I am offer you 30 day money back guarantee if this tool is defective. Shipping is just $14.50 within USA. Canada $33.00. I will combine shipping if you buy more than one item from me. This is used equipment. Buyer assumes all responsibility for liability. Inspection and safety check prior to use, the safe use and maintenance of this equipment. It will be assumed that by purchasing this item, the buyer knows and understands what this item is, and how to use it. Seller will not be responsible for any property damage or body injury. Any questions should be asked prior to buying. please check out my other ebay items. On Jul-02-08 at 17:56:32 PDT. Seller added the following information:
INGERSOLL RAND AVC-12 PNEUMATIC RIVET GUN W SETS-INGERSOLL RAND AVC-12- 3X PNEUMATIC RIVET GUN-COMES WITH PICTURED 0.401 SETS-TESTED AND THIS RIVET GUN WORKS GREAT-RIVET GUN AND SETS COME EXACTLY AS PICTURED GREAT FIND!
APT'C' yolk pneumatic rivet squeezers in excellent condition. Works perfectly and very powerful. Takes standard 3/16 squeezer bits. Part number 7050 Serial number 67032 Check out my other aviation tools for sale.
VINTAGE WORKING CHICAGO PNEUMATIC'A' SQUEEZE RIVETER MODEL NUMBER CP-214. GREAT VINTAGE PIECE TO DISPLAY OR EVEN USE ON YOUR NEXT PROJECT. SHIPPING IS $14.95 FOR THE U.S. NO INTERNATIONAL BIDDERS. NO REFUNDS SO ASK ALL QUESTIONS BEFFORE BIDDING.
VINTAGE WORKING THOR INLINE- STRAIGHT PNEUMATIC RIVET GUN MODEL 5372. GREAT VINTAGE PIECE TO DISPLAY OR EVEN USE. MOST OF THE ORIGINAL PAINT HAS FLAKED OFF OVER THE YEARS. BUT STILL A GREAT VINTAGE METAL WORKING TOOL. SHIPPING IS $12.95 FOR THE U.S. NO INTERNATIONAL BIDDERS. NO REFUNDS SO ASK ALL QUESTIONS BEFFORE BIDDING.
This auction lot is for an excellent used condition Chicago Pneumatic 9x big bore rivet gun. Model# 600. Works great on any-8 or larger rivets. 0.498 shank. You can usee your standard rivet dies by wrapping aluminum tape on the rivet die shank. Or you can buy an adaptor from browntool.com. Tested and works good. What you see are the actual photos. please check out my other ebay items. On Jul-02-08 at 17:56:32 PDT. Seller added the following information:
Here is a cp4444 4x rivet gun in great shape. Chicago pneumatics makes some of the best rivet guns. It's in good working condition and will come with a retainer spring. Happy bidding no reserve.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14758383596-0x117-
This is a used tool. Has scratches and stains. AS STATED BEFORE, BECAUSE I DON'T KNOW IF IT'S FULLY FUNCTIONAL- SOLD AS-IS, NO RETURNS, REFUNDS OR EXCHANGES! SELLING ONLY WHAT'S PICTURED AND DESCRIBED- NO OTHER ATTACHMENTS OR ACCESSORIES! Ebay no longer offers insurance in the shipping calculator- let me know if you want it added. Insurance is not required. But I will not be held responsible for loss or damage in route. Don't hesitate to ask questions. I will answer them to the best of my ability. I can e-mail more and better pictures. When Paying via PayPal: YOU MUST HAVE A U.S. BASED PAYPAL ACCOUNT TO PAY WITH PAYPAL! NO INTERNATIONAL ACCOUNTS WILL BE ACCEPTED! MUST HAVE CONFIRMED AND VERIFIED SHIPPING ADDRESS. NO EXCEPTIONS! I SHIP ONLY TO CONFIRMED ADDRESS PROVIDED BY PAYPAL ON THE PAYPAL PAYMENT PAGE. PLEASE DON'T ... moreASK TO SHIP TO AN ADDRESS DIFFERENT FROM THE CONFIRMED ADDRESS ON THE PAYMENT PAGE. TRANSACTIONS HAVING UNCONFIRMED ADDRESS WILL BE CANCELED! IF YOU HAVE AN UNCONFIRMED ADDRESS WITH PAYPAL, PLEASE CONTACT FOR PAYMENT OPTIONS. While all items are inspected. THEY ARE USED, ALL SALES ARE FINAL. I personally check and test every item. I do my best to describe the items and note any flaws. I am not. Nor do I claim to be an expert on anything. Flaws or imperfections can be found in almost every product out there if one looks hard enough. Please contact me with any concerns or questions, as all sales are final, all items are SOLD AS-IS. NO RETURNS, REFUNDS OR EXCHANGES. BUYER TAKES FULL AND ALL RESPONSIBILITY FOR PROPER AND SAFE USE OF ALL ITEMS PURCHASED. Please look at my other auctions. Feel free to browse my large inventory on Half.com(e-bays' sister site) Thanks for looking and good luck! 20390-213
This is a Chicago Pneumatic 3X rivet gun with new rivet sets. The model is CP4444 RUSAB. It works like new. It has a beautiful feathering trigger. It uses standard.401 shank rivet sets. Also included are all of the new rivet sets shown which include 3/32" 1/8" 5/32" and 3/16" universal head sets and large and small mushroom flush sets. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14768f7de7d-0x102-
This is a Chicago Pneumatic 4X rivet gun with new rivet sets. The model is CP4444 RUTAB. It works like new. It has a beautiful feathering trigger. It uses standard.401 shank rivet sets. Also included are all of the new rivet sets shown which include 3/32" 1/8" 5/32" and 3/16" universal head sets and large and small mushroom flush sets.
Chicago Pneumatic rivet squeezer. Model: CP-0214 This squeeze has been in my toolbox for over twenty years. Because I have several others. This one doesn't get used much. It is strong and opens and closes as it should. It does have a small air leak on the rear of the tool. The jaw has been ground on by me along time ago. It is only nine inches long and accepts standard 3/16" shanked sets. U.S. buyers only. Please look at all pictures closely. The items pictured are the items you will receive. Most of the items that I sell are used aerospace surplus. Some items may have engravings. Paint, sealant, grind marks, etc. If the item does have any defects then I have shown it in the pictures. Visit my other items for more tools. I offer combined shipping discounts. You pay the highest shipping price shown plus $1 for each additional item. ... moreall items must be paid for at the same time) Thank you for your business
Sale is for 1 Cleveland tool company hole punch. Tool easily punched through 2 pieces of.040 aluminum. Leaving a countersunk burr free hole. Tool leaks air at handle. But does not affect performance. Jaw depth is 2" I don't know how thick of aluminum this will punch through. It was purchased at an aircraft tool auction, so I assume that it was used for aircraft sheet metal. tool weights 12 pounds. 3 day shipping to all 50 states.
Serial#H685170 working condition
This is a Cleco division. Aircraft compression riveter. Comes with"C" yoke that has a 2" reach. Tool cycles great and takes 1/4" rivet sets. I will include one set pictured in this auction. Please look at all pictures and ask questions before bidding. Tool will be sold as is. Tool will be shipped with"C" Yoke off to keep shipping costs down. Thanks for looking
Chicago Pneumatic rivet squeezer CP-0214. It is in nice cosmetic condition it looks to have been repainted or maybe rebuilt I am not sure. The jaws open to around 1 3/4" and close around 7/8" I think something needs adjusted if possible because when you push the lever with your thumb nothing happens until you push up the little black lever up past the brass stop as shown in a picture. I did not have the rivets need to fully test it but it smashed a 1" board down to about 7/8"
This is a GBP built Huck 353 rivet gun for setting industrial and aircraft lock bolts. This unit will put out 9000lbs of tension to set lockbolts and blind rivets from 3/16" all the way to 3/8" in diameter. This gun will comes with 4 tips.3/16"1/4"5/16" and 3/8" Tips. I also have the instruction manual for this riveter that will go with it. This riveter is in good working order. I pulled a 3/8" lockbolt to test it. These guns built by GBP were made later after huck stopped making them. Please feel free to ask any questions. I have over 1600 feedbacks and 100% positive. Thanks
Up for auction we have here is a use Alligator Yoke Pneumatic Rivet Squeezer by US Industrial Tool. Part number US114A. Specs: These silent compression riveters are excellent for many assembly operations- used in aircraft. Automotive, truck,bus components, boats, metal furniture, toys, electronic chassis and appliance assembly. Rivet capacity Alum: 1/8' Rivet capacity Steel: 3/32" Force in lbs. 3.000 Reach: 1 1/2" Max Travel: 9/16" Accepts 3/16" shank squeezer sets. One-man operation increases productivity. Rolling cam and wedge assembly greatly multiplies compression force of piston. Squeeze" action permits easy control. Exceptional accuracy and uniformity. Speed of squeeze riveter can be controlled by throttle. Swivel air inlet aids maneuverability. Develops full squeezing force with only 90 P.S.I. air pressure
UsedChicago Pneumatic CP4444 RUTAB 4X Air Rivet Gun-Air Riveter- Aircraft Tools This rivet gun works great. Very nice feathering trigger. Has some nicks and scratches and has some markings. Shipping to the USA only. Thank you for looking at this auction. Posted with
Used Chicago Pneumatic CP4444 RUTABR 4X Air Rivet Gun-Air Hammer- Aircraft Tools This rivet gun is in nice condition and works great. Very nice feathering trigger. Has some nicks and scratches. Shipping to the USA only. Thank you for looking at this auction. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-148c199de87-0x10f-
HUCK RIVET GUN M/N 353 WITH CARRYING CASE& ACCESSORIES BELOW IS A LIST OF THE PARTS IN PACKAGE: 79585. 79588, 78974, 79590, 2 PCS 84212, 2 PCS 84213, 87559, 2 PCS 99-86, 99-99, 99-100, 99-335, 99-495, 99-626, 2 PCS 99-2564, 99-2565, 2 PCS 99-2568, 99-2559, 99-2557, AND 99-2571 BELOW IS A LIST OF THE PARTS OUT OF PACKAGE: 99-99. 99-100, 99-591, 99-609, 99-2557, 9585, PLUS ALL THE OTHER LOOSE PARTS SHOW IN PICS SOME DIDN'T HAVE M/N'S ON THEM. ALMOST ALL THE PIECES IN AND OUT OF PACKAGE HAVE SOME SURFACE RUST. AUCTION INCLUDES EVERYTHING SHOWN IN PICS. RIVET GUN WAS REMOVED FROM A WORKING ENVIROMENT. BUT HAS NOT BEEN TESTED SO AS ALL OF OUR AUCTIONS IT IS BEING SOLD AS IS AND ALL SALES ARE FINAL. BE SURE TO CHECK OUT OUR OTHER AUCTIONS FOR SIMILIAR ITEMS. SHIPPING CAN BE COMBINED. Disclaimer- ALL ITEMS NEW OR USED ARE SOLD AS IS ... moreAND ALL SALES ARE FINAL. QUESTIONS? PLEASE CALL 210-566-3300 or text us at 210-273-3394 Check out my! Be sure to add me to your favorites list!
Up for auction is a Chicago Pneumatic 3 X rivet gun model CP-4444. Accepts.401 sets. Barrel is tight. Works well! I do combine shipping for US buyers. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! Payment is due within 72 hours end of auction.
HUCK NUT PLATE RIVETER M/N 302-20 LOOKS TO BE IN GOOD PHYSICAL CONDITION AND WAS REMOVED FROM A WORKING ENVIROMENT. BUT HAS NOT BEEN TESTED SO AS ALL OF OUR AUCTIONS IT IS BEING SOLD AS IS AND ALL SALES ARE FINAL. BE SURE TO CHECK OUT OUR OTHER AUCTIONS FOR SIMILIAR ITEMS. SHIPPING CAN BE COMBINED. Disclaimer- ALL ITEMS NEW OR USED ARE SOLD AS IS AND ALL SALES ARE FINAL. QUESTIONS? PLEASE CALL 210-566-3300 or text us at 210-273-3394 Check out my! Be sure to add me to your favorites list!
Huck Model 200 Pneumatic Aircraft Rivet Gun-although vintage. Works great.comes with original metal case, tools and tips. Everything is there except for 2 tips.no reserve.
Used Chicago Pneumatic CP4444 RUTAB 4X Air Rivet Gun-Air Hammer- Aircraft Tools This rivet gun works great. Very nice feathering trigger. Has some nicks and scratches. Shipping to the USA only. Thank you for looking at this auction. Posted with
Chicago Pneumatic CP214 Rivet Squeezer CP-214 Riveter Aircraft Air Tool. Works good.