BONDING BRUSH 1/4" SHAFT 9/16" X 1-7/8" LONG MACHINIST AVIATION AIRCRAFT TOOLS
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! You are buying 1 1/4" Shaft Bonding Brush. Measurements are approximately 9/16" x 1-7/8 The writing on the side reads: EYE PROT. REQ. MADE IN USA MSFS 20.000 RPM" These high quality aviation tools and parts that are being sold in the following days and weeks were used by an aviation machinist/ mechanic that was transfered from our area. Please look at the pictures as some of them might have tiny rust spots but are fully functional and will work as intended. We will do our best to describe them as accurately as we can as well as take the best pictures possible. Please see our other items as we will be listing them all. The square in the picture is used for reference only and is not included. Feel free to ask any questions before purchasing. We try to check our email ... moreseveral times throughout the day and will get back to you as soon as possible and try our best to answer any questions. We are presently only shipping to the Continental US. Hawaii, Alaska and Puerto Rico Thank you for looking. We hope you found what you're looking for! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
CLECO 5RSATP-25BQ PNEUMATIC PISTOL GRIP 1/4" REV SCREWDRIVER AIRCRAFT TOOLS
CLECO 5RSATP-25BQ PNEUMATIC PISTOL GRIP 1/4" REVERSIBLE SCREWDRIVER-THIS CLECO AIR SCREWDRIVER IS USED IN GOOD CONDITION! SEE PICS! JUST HAS THE PAINT FADED BUT THE TOOL WORKS GOOD! CLECO MODEL 5RSATP-25BQ-SIZE: 1/4" HEX-RPM: 2800-REVERSIBLE-COMES EXACTLY AS PICTURED! THESE RETAIL NEW FOR OVER $1.000.00! GREAT FIND!
|
|
AT540 SCREW KNOCKER / REMOVER WITH APEX 1/4" BIT AIRCRAFT TOOLS
AT540 SCREW KNOCKER/ REMOVER WITH APEX 1/4" BIT-AT540 SCREW KNOCKER-0.401 SHANK-INCLUDES A 1/4" APEX BIT-PIN ON DRIVE IS PUSHED IN-HAS SANDED MARKS WHERE MILITARY ETCHED NUMBERS WERE REMOVED( cosmetic) COMES EXACTLY AS PICTURED! GREAT FIND! 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13e68b67b8b-0xf1-
|
|
1 Cleco Pneumatic 35 in. lb. Reversable Screw Gun Model 8RSAPT10 Aircraft Tools
One Cleco Model#8RSAPT10 Reversable Screw Gun Has( 35 in" lb-D- engraved on tool Made in USA This tool is used. But has been tested and is in great working condition. Tool pictured is the one you will receive. JUST HAS THE PAINT FADED BUT THE TOOL WORKS GOOD! I combine shipping when possible Thanks for looking. Posted with
|
|
Aircraft Bucking Bar "Unique Bar" 1 lbs 9.3 ozs Aircraft Aviation Tools
14.00 Normal 0 false false false EN-US X-NONE X-NONE Aircraft Bucking Bar! Best Quality: Cold Rolled and Machined(Est. 4140 STEEL" 239.000 lbs psi ultimate tensile strength) All Sheet-Metal Technicians need one of these! Length: 4” Width: 2" 1" Thick• Surplus: The Best Industrial Bars on the Market! Working ends have been"Re-Polished" Stock Photos. Approximately 1 lbs 9.3 ozs. World-Wide Shipping! SATISFACTION GUARANTEED! Check out my! Statement of Policy's& Procedures: On-Line Sales Only! Buyers pay calculated shipping costs as shown in the“ Shipping and payments” section. To save you money on shipping cost we combine multiple items into USPS Flat Rate Boxes when shipping. Acceptable payment methods include: PayPal, Pay on PayPal's web-site with e-check. Credit or debit cards} If you prefer any payment ... moremethod other than PayPal. You will have to contact us. We use the United States Postal Service for all shipments unless otherwise stated. If you need a certain shipper you will have to contact us. We comply with all foreign customs policies. We do not falsify customs declaration values of purchased items for international shipments.
|
|
1/4" Slim Body Boeing FT Rivet Sets for Std Rivet Guns Aircraft Aviation Tools
14.00 Narrow Clearance Boeing FT Rivet Sets! 8. 1/4" AN470 BAC FT Modified Universal Sets. For the small button head"FT" style rivets) Best Quality"STEEL" All Sheet-Metal Technicians need a few of these! Size: 1/4" 8 These FT Style rivet sets list price $ 54.45 each! Made in U.S.A. These sets are for the reduced head. Boeing BACR15FT" FT Style rivets! Works with all standard.401 rivet guns. FT rivets are the standard replacement rivets for the standard BB universal style rivets on all Boeing aircraft) Smaller heads = Lighter Aircraft. Surplus: The best industrial grade! Individually cleaned. Polished, packaged and ready to ship! World-Wide Shipping! 14.00 Normal 0 false false false EN-US X-NONE X-NONE SATISFACTION GUARANTEED! Check out my other items! Statement of Policy's& Procedures: On-Line Sales ... moreOnly! Buyers pay calculated shipping costs as shown in the“ Shipping and payments” section. To save you money on shipping cost we combine multiple items into USPS Flat Rate Boxes when shipping. Acceptable payment methods include: PayPal, Pay on PayPal's web-site with e-check. Credit or debit cards} If you prefer any payment method other than PayPal. You will have to contact us. We use the United States Postal Service for all shipments unless otherwise stated. If you need a certain shipper you will have to contact us. We comply with all foreign customs policies. We do not falsify customs declaration values of purchased items for international shipments.
|
|
Aircraft tools 14 peices for rivet squeezers 3/32 1/8 5/32 used
Aircraft tools 14 peices for rivet squeezers 3/32 1/8 5/32 used No Returns Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
US Industrial Tools 90 degree right angle drill Aerospace Aircraft 1/4 28 EUC
US INDUSTRIAL TOOLS 90 degree drill This drill is in like new condition. It is a US1704DA5 model. It still has the plug in the air port and no tool ID markings of any kind. What you see pictured is what you get. Thanks for your interest. Check out my! Be sure to add me to your! Posted with
|
|
Aircraft tools APT 1/2" hex size collar/nut runner
Up for auction is an APT 1/2" hex size collar/nut runner. Works well! Turns at around 500RPM. Item does have some previous owners engravings on it. I do combine shipping. I ship via USPS flate rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-143452604b2-0xf3-
|
|
Aircraft tools United Air Tool (Jiffy) 1/4" offset nut runner/collar runner
Up for auction is a United Air Tool(Jiffy) 1/4" offset nut runner/collar runner. The hex size is 1/4" Turns at 450 RPM. Works well! NICE tool! Happy bidding! I do combine shipping. I ship via USPS flate rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools Ingersoll Rand pneumatic 1/4" hex driver model # 100PQ1
Up for auction is a Ingersoll Rand pneumatic 1/4" hex driver model# 100PQ1. Accepts 1/4" hex bits. Reverse is at the thumb level. Small and light weight! In good used condition! I do combine shipping. I ship via USPS flate rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-143452604bc-0xf8-
|
|
Aircraft tools United Ait Tool 1/4" nut setter
Up for auction is a United Ait Tool 1/4" nut setter. Unsure of the RPM, model# D2-250, maybe 250RPM? Has previous owners engravings on it. I do combine shipping. I ship via USPS flate rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14346599d5a-0x106-
|
|
Aircraft tools 2 pc Snap On 1/4" extensions TMXK4 and TMXK60
Up for auction is 2 pc Snap On 1/4" extensions. You get a TMXK4 with no markings and a TMXK60 with a stencil of"PSDHBX0921" and a small"B" and"12" engraved on it. These are in goos working condition. Happy bidding! I do combine shipping. I ship via USPS flate rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale!
|
|
Aircraft tools 2 pc Snap On 1/4" drive extensions # TMXK4
Up for auction is a 2 pc Snap On 1/4" drive extensions# TMXK4. 1 is clean and the other has some engraving I cannot make out, only about an inch long and some paint, in good used condition! Happy bidding! I do combine shipping. I ship via USPS flate rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools APT/United Air Tool 1/2" hex size collar/nut runner
Up for auction is an APT/United Air Tool 1/2" hex size collar/nut runner. Works well! Turns at around 500RPM. Item does have some previous owners engravings on it. I do combine shipping. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale!
|
|
Aircraft tools Jiffy 1/4 28 threaded pancake drill
Up for auction is a Jiffy. 1/4" 28 threaded pancake drill, turns great at 2000 RPM's. This is a reversible drill and the head is omni- directional(turns 360 degree's) Happy bidding! I do combine shipping. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale!
|
|
Aircraft tools 1/4" hex drive size roller ratchet
Up for auction is a 1/4" hex drive size roller ratchet. Item is in nice used condition! Happy bidding! I do combine shipping. I ship via USPS flate rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools Omega Technologies 1/4" drive double ended roller ratchet
Up for auction is Omega Technologies 1/4" drive double ended roller ratchet. Item is in EXCELLENT used condition! Happy bidding! I do combine shipping. I ship via USPS flate rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools United Air Tool 1/4" hex size pancake nut/collar runner
Up for auction is a United Air tool 1/4" hex size pancake collar/ nut runner. Model# D2-450, turns at 450 rpm. Happy bidding! I do combine shipping. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text!
|
|
Aircraft tools United Air Tool 1/4 28 threaded pancake drill
Up for auction is a United Air Tool. 1/4" 28 threaded pancake drill, turns great at 2000 RPM's. This is a reversible drill and the head is omni- directional(turns 360 degree's) Happy bidding! I do combine shipping. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale!
|
|
Aircraft tools 1 counter sink cage by Magnavon
Up for auction is a counter sink cage by Magnavon. Accepts 1/4" 28 bits, in good used condition! Happy bidding! I do combine shipping. Buyers using the International Shipping program are not eligible for combined shipping I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 1 Aro and 1 Rockwell drill
Up for auction is 1 Aro and 1 Rockwell drills. The Aro turns true at 2000 RPM and the Rockwell turns true at 1850 RPM. Both have Jacobs 0-3/8" capacity chucks. Happy bidding! I do combine shipping. Buyers using the International Shipping program are not eligible for combined shipping I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools Jiffy 1/4 28 threaded pancake drill 2600RPM
Up for auction is a Jiffy pancake drill. Accepts 1/4 28 threaded bits, turns great at 2600 RPM! NICE find! The head rotates 360 degrees. Happy bidding! I do combine shipping. Buyers using the International Shipping program are not eligible for combined shipping I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 15 bonding brush's, threaded 1/4 28
Up for auction is 15. 1/4 28 threaded bonding brush's, variety of sizes! In good used condition! Happy bidding! I do combine shipping. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text!
|
|
Aircraft tools 7- 1/4, 28 threaded to 1/4" dia. collets
Up for auction is 7 threaded 1/4 28 to 1/4" dia. colletts. In good used condition! Happy bidding! I do combine shipping. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text!
|
|
Aircraft tools Snap On 1/4" drive breaker bar # TM10G
Up for auction is a Snap On 1/4" breaker bar#TM10G. The retaining ball is missing. Has no engravings. Happy bidding! I do combine shipping. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text!
|
|
Aircraft tools 1 1/2-12 L/H H4 machinist tap
Up for auction is a 1 1/2-12 L/H H4 tap. Looks like it was not used much at all! Happy bidding! I do combine shipping. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale!
|
|
Aircraft tools 1 Rockwell pneumatic drill 1850 RPM
Up for auction is 1 Rockwell drill. Turns true at 1850 RPM and have Jacobs 0-1/4" capacity. Happy bidding! I do combine shipping. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale!
|
|
Aircraft tools 6 Snap On 1/4" drive extensions # GTMX60
Up for auction is 6 Snap On 1/4" drive extensions# GTMX60. All have a small"B" engraving OR a stencil on them, please see pic's, 1 is missing the retaining ball. Happy bidding! I do combine shipping. Buyers using the International Shipping program are not eligible for combined shipping I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools Dotco straight die grinder 20000RPM 1/8" collett
Up for auction is a Dotco straight die grinder# 10L2081C. Turns great at 20,000RPM. Has 1/8" collett. Item does have some previous owners engravings on it. I do combine shipping. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale!
|
|
Aircraft tools 8 1/4" drive extensions
Up for auction is 8 1/4" extensions. Maker are Allen and Gear Wrench, in good used condition! Happy bidding! I do combine shipping. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! Posted with
|
|
Aircraft tools 8 pc QC adaptors and 1/4 28 threaded collets
Up for auction is an 8 pc 1/4 28 threaded collets and QC adapters. You get 2 QC to 1/4" dia. adapters and 6 1/4 28 threaded collets, 4 are 1/4 dia, 1 is 5/16 and 1 is.156 dia. I do combine shipping. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools Ingersoll Rand-Hi Shear head 1/2" collar / nut runner
Up for auction is a Ingersoll Rand with a Hi Shear head 1/2" nut runner/collar runner. The hex size is 1/2" Turns around 450 RPM. Works well! Happy bidding! I do combine shipping. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 1/4 28 threaded collets 11 pcs
Up for auction is 9 1/4 28 to 1/4" adaptors and 2 1/4 28 to 5/16" adaptors. In good used condition. I do combine shipping. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144af5ea2f1-0x10f-
|
|
Aircraft tools United Air Tool 1/4 28 threaded pancake drill reversible!!!!
Up for auction is a United Air Tool 1/4 28 threaded pancake drill. Reversible! Turns at 2000 RPM's. Happy bidding! I do combine shipping. Buyers using the International Shipping program are not eligible for combined shipping I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 10 1" sanding arbors by 3M
Up for auction is 10 1" sanding arbors by 3M. These are 5/16" shafts for quick chuck, you do not need a quick chuck, just 5/16" capacity tooling. These are the"Female" type. Happy bidding! I do combine shipping. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-144f367c2c4-0x111-
|
|
Aircraft tools 10 1/2" barrel sanding arbors
Up for auction is 10 1/2" barrel sanding arbors. In good used condition! The shafts are 5/16" diameter, quick chuck type. Happy bidding! I do combine shipping for US buyers. Buyers using the International Shipping program are not eligible for combined shipping Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale!
|
|
Aircraft tools 8 1" sanding arbors
Up for auction is 8 1" sanding arbors. These are the"Female" type. 5 of them have quick chuck shafts and 3 have 1/4" shafts. Happy bidding! I do combine shipping for US buyers. Buyers using the International Shipping program are not eligible for combined shipping Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale!
|
|
ATI (Snap On Tools) 1/4 Rivet Set AT100A-2-1/4 USA Made Aircraft Sheet Metal
ATI Rivet Set- 401 Shank- AN470- For 1/4 rivets- 2.5" overall length- Model: AT100A-2-1/4- Good condition* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
Aircraft tools Ingersoll Rand 45 degree drill 1/4 28 threaded FOR PARTS
Up for auction is Ingersoll Rand 45 degree drill FOR PARTS. Motor turns just not the head, model# 5LK181, 3000 Rpm. Accepts 1/4 28 threaded bits. Happy bidding! I do combine shipping for US buyers. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale! Payment is due within 72 hours end of auction.
|
|
HI LOK OMEGA 1/4 SQUARE DRIVE ROLLER RATCHET AIRCRAFT TOOLS
Used Omega roller ratchet in good condition. 1/4" square drive 6 1/4" long 150 inch pounds. U.S. bidders and buyers only. Please look at all pictures closely. The items pictured are the items you will receive. Most of the items that I sell are used aerospace surplus. Some items may have engravings. Paint, sealant, grind marks, etc. If the item does have any defects then I have shown it in the pictures. Payment is due within 3 days after auction ends. Unless I am contacted. Visit my other items for more tools. I offer combined shipping discounts but please wait until your last item ends. And request an invoice, before paying. I ship small lightweight items by 1st class mail. For larger items, and combined shipping, I use USPS Priority flat rate boxes. Currently the cost for shipping USPS flat rate is $5.80. $12.35 and $17.45 depending ... moreon box size. Thank you and good luck.
|
|
Aircraft tools Sioux 90 degree drill # 1AM1551 2800 RPM 1/4 28 threaded
Up for auction is a Sioux 90 degree drill# 1AM1551. Turns nice at 2800 RPM, accepts standard 1/4 28 threaded bits. Item does have some previous owners engravings on it. I do combine shipping for US buyers. Buyers using the International Shipping program are not eligible for combined shipping I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale! Payment is due within 72 hours end of auction.
|
|
Seven Aircraft 1" Shank Rivet Riviter Sets Tools
Seven Aircraft 5/8" Shank Rivet Sets Tools Came from an estate sale. Thanks for looking.
|
|
Five Aircraft 5/8" Shank Rivet Sets Tools 3/16, 1/4, 5/16, 3/8 & 9/16 Flat
Five Aircraft 5/8" Shank Rivet Sets Tools 3/16. 1/4, 5/16, 3/8& 9/16 Flat. Thanks for looking.
|
|
Aircraft tools 10 1/2" side clamps
Up for auction is 10 1/2" side clamps. In good used condition. Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
ATI (Snap On Tools) Short Flush Rivet Set AT113A-1 Aircraft Sheet Metal Tool
ATI Flush Rivet Set- 401 Shank- Model: AT113A-1- American made- ATI is a Snap On company* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
HI LOK OMEGA 1/4 SQUARE DRIVE DOUBLE END ROLLER RATCHET AIRCRAFT TOOLS
Used Omega roller ratchet in great condition. Double ended with 1/4" square drive on each end. 6 3/4" long 150 inch pounds. U.S. buyers only. Please look at all pictures closely. The items pictured are the items you will receive. Most of the items that I sell are used aerospace surplus. Some items may have engravings. Paint, sealant, grind marks, etc. If the item does have any defects then I have shown it in the pictures. Visit my other items for more tools. I offer combined shipping discounts. You pay the highest shipping price shown plus $1 for each additional item. all items must be paid for at the same time) Thank you for your business
|
|
VSI HI LOK 1/4 SOCKET GEARLESS ROLLER RATCHET AIRCRAFT TOOLS
Used roller ratchet in good condition. Works great. 1/4" socket 6 1/4" long U.S. buyers only. Please look at all pictures closely. The items pictured are the items you will receive. Most of the items that I sell are used aerospace surplus. Some items may have engravings. Paint, sealant, grind marks, etc. If the item does have any defects then I have shown it in the pictures. Visit my other items for more tools. I offer combined shipping discounts. You pay the highest shipping price shown plus $1 for each additional item. all items must be paid for at the same time) Thank you for your business
|
|
1/4" Hex Nose Piece for Lockfast Jo-Bolt Runner Aircraft Tools
Theis fits all Lockfast or Vioshan Jo-Bolt tools. The sizes included is a 1/4" Hex. In excellent working condition.
|
|
ATI (Snap On Tools) 1/8, Offset 7.5" Rivet Set USA Made Aircraft Sheet Metal
ATI Rivet Set- 401 Shank- AN470- For 1/8 rivets- 7.5" overall length- Model: AT101A-7-1/8- Good condition- American made- ATI is a Snap On company* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
|
|
Aircraft tools 7 each 1/4" hex drive magnetic extensions
Up for auction is a 7 each 1/4" hex drive magnetic extensions. In good used condition. I do combine shipping for US buyers. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale! Payment is due within 72 hours end of auction.
|
|
Rivet sets .498 Shaft 1/4" & Offset Extension aircraft air tools
There are 2.498 rivet sets. The first one is a 1/4" offset rivet shaft. The second one has a.498 shaft with a offset with a.498 hole in the end. It is for extending the reach of your set around obsticals. Great for geting into those hard to reach areas.
|
|
Aircraft tools 6 Quick chuck to 1/4" tooling adaptors.
Up for auction is 6 Quick chuck to 1/4" tooling adaptors. Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 1/4 and 3/16 hi lock removal bar
Up for auction is a 1/4 and 3/16 hi lock removal bar. In good used condition. Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 8 1/4" hex magnetic extensions
Up for auction is 8 1/4" hex magnetic extensions. Used but lots of life left! Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 8 1/4" hex to 1/4" square drive adaptors
Up for auction is 8 1/4" hex to 1/4" square drive adaptors. Used but lots of life left! Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 7 Quick chuck to 1/4" tooling adaptors.
Up for auction is 7 Quick chuck to 1/4" tooling adaptors. Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools Bonney 3" crows foot 1/2" drive
Up for auction is a Bonney 3" crows foot 1/2" drive. In good used condition! I do combine shipping for US buyers. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale! Payment is due within 72 hours end of auction.
|
|
ALCOA HI LOK 1/4 SOCKET ROLLER RATCHET AIRCRAFT TOOLS
Used Alcoa roller ratchet in good condition. 6 1/4" long. 1/4" socket no engraving. U.S. buyers only. Please look at all pictures closely. The items pictured are the items you will receive. Most of the items that I sell are used aerospace surplus. Some items may have engravings. Paint, sealant, grind marks, etc. If the item does have any defects then I have shown it in the pictures. Visit my other items for more tools. Payment is due within 3 days. Unless I am contacted. I offer combined shipping discounts. You pay the highest shipping price shown plus $1 for each additional item. all items must be paid for at the same time) Thank you for your business
|
|
Aircraft tools 1 BRILES Microstops countersink cages W/3EA BRILES CUTTERS BOEING
THIS AUCTION IS FOR ONE BRILES COUNTERSINK CAGE AND 3 BRILES CUTTERS THE BOEING BRILES CUTTERS ARE#10. 21and#30 THE BRILES CAGE LOOKS GREAT AND WORKS GREAT ALL THE CUTTERS ARE SHARP AND A COUPLE never used SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
Aircraft tools 1 ZEPHYR Microstops countersink cage W/3EA BRILES CUTTERS BOEING
THIS AUCTION IS FOR ONE ZEPHYR COUNTERSINK CAGE AND 3 BRILES CUTTERS THE BOEING BRILES CUTTERS ARE#10. 21and#30 THE BRILES CAGE LOOKS GREAT AND WORKS GREAT ALL THE CUTTERS ARE SHARP SHIPPING WILL BE FREE ANYWHERE IN THE USA
|
|
Aircraft tools Snap On 1/2" breaker bar # SHBB24
Up for auction is a Snap On 1/2" breaker bar# SHBB24. Item does have previous owners engravings or stencils. Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 1 ball peen hammer and 1 mallet
Up for auction is 1 ball peen hammer and 1 mallet. The ball peen looks new and is 16oz and the mallet I am unsure of. In great condition! Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools Ingersoll Rand 1/4" hex drive size nut runner # 100PQ1
Up for auction is an Ingersoll Rand 1/4" hex drive size nut runner# 100PQ1. Reversible, work well! Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
HI LOK OMEGA 1/4 5/16 SOCKET ROLLER RATCHET AIRCRAFT TOOLS
Used Omega roller ratchet that works great. It has some chrome peeling and additional numbers printed on it. Both 1/4" and 5/16" sockets are included. The clips have been removed from the stems of both sockets. So they can be reversed easily. 6 1/4" long 80 inch pounds U.S. buyers only. Please look at all pictures closely. The items pictured are the items you will receive. Most of the items that I sell are used aerospace surplus. Some items may have engravings. Paint, sealant, grind marks, etc. If the item does have any defects then I have shown it in the pictures. Visit my other items for more tools. I offer combined shipping discounts. You pay the highest shipping price shown plus $1 for each additional item. all items must be paid for at the same time) Thank you for your business
|
|
Aircraft tools Ingersol Rand 1/4" drive nut runner
Up for auction is a Ingersol Rand 1/4" drive nut runner. Tool does reverse, I am unsure of the RPM. Works well! I do combine shipping for US buyers. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale! Payment is due within 72 hours end of auction.
|
|
Aircraft tools Ingersoll Rand 1/4" drive air ratchet # 103A
Up for auction is a Ingersoll Rand 1/4" drive air ratchet# 103A. Works well! I do combine shipping for US buyers. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale! Payment is due within 72 hours end of auction.
|
|
Aircraft tools 1 ATI cannon plug plier # AT508K
Up for auction is 1 ATI cannon plug plier# AT508K. Works well! Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools Ingersoll Rand 90 degree drill 1/4 28 threaded
Up for auction is an Ingersoll Rand 90 degree drill. Accepts 1/4 28 threaded bits, turns well at 2700 RPM, model# QA2759D. Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools Cleco 1/4" drive nut runner # 4RNL7RA-8
Up for auction is a Cleco 1/4" drive nut runner# 4RNL7RA-8. Tool does reverse, I am unsure of the RPM or the torque setting. Works well! I do combine shipping for US buyers. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale! Payment is due within 72 hours end of auction.
|
|
Aircraft tools 3 16oz plumb bobs 1 new
Up for auction is 3 16oz plumb bobs. 1 is new. Happy bidding! I do combine shipping for US buyers. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale! Payment is due within 72 hours end of auction.
|
|
1/8" RIVET KNOCKOUT PUNCH AIRCRAFT TOOLS VERY NICE
1/8" RIVET KNOCKOUT PUNCH AIRCRAFT TOOLS VERY NICE THIS 1/8" RIVET KNOCKOUT PUNCH SET IS UP FOR BIDDING. USED BUT IN GREAT WORKING CONDITION. PLEASE LOOK AT PICTURES BEFORE PLACING A BID. UNFORTUNATELY DUE TO USPS RAISING THEIR PRICES. WE HAVE HAD TO RAISE SHIPPING. WE DO COMBINE SHIPPING. IF IT FITS IT SHIPS! WE STRONGLY SUGGEST COMBINED SHIPPING ON MULTIPLE ITEMS. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat rate shipping and have notified us.California residents are subjuct to state tax. We gladly combine shipping.We use usps ... moreflat rate mail for the majority of our shipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page
|
|
Aro AVK 8518 Threaded Insert Installation Air Tool 1/4"-900RPM- Aircraft Tools
Aro AVK 8518 Threaded Insert Installation Air Tool 1/4" 900 RPM- Aircraft Tools. This tool is in nice condition and works as it should. No other mandrels are included. Shipping to the USA only. Please check my other auctions Thank you for looking Air Rivnut Tool. Clinch Nut Tool.
|
|
1/4" RIVET KNOCKOUT PUNCH AIRCRAFT TOOLS VERY NICE
1/4" RIVET KNOCKOUT PUNCH AIRCRAFT TOOLS VERY NICE THIS 1/4" RIVET KNOCKOUT PUNCH SET IS UP FOR BIDDING. USED BUT IN GREAT WORKING CONDITION. TIP DOES HAVE MEDIUM AMOUNT OF USE. PLEASE LOOK AT PICTURES BEFORE PLACING A BID. UNFORTUNATELY DUE TO USPS RAISING THEIR PRICES. WE HAVE HAD TO RAISE SHIPPING. WE DO COMBINE SHIPPING. IF IT FITS IT SHIPS! WE STRONGLY SUGGEST COMBINED SHIPPING ON MULTIPLE ITEMS. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat rate shipping and have notified us.California residents are subjuct to state tax. We ... moregladly combine shipping.We use usps flat rate mail for the majority of our shipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page
|
|
Aircraft tools 4 mallet's (1 rawhide)
Up for auction is 4 mallet's(1 raw is hide) In good used condition! Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 10 1/8" rotary files
Up for auction is 10 1/8" rotary files. In good used condition(1 is new) Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 10 quick mchuck to 1/4" adaptors
Up for auction is 10 quick chuck to 1/4" adaptor's. In good used condition! Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 4 cutting wheel arbors, 1/4" shaft's
Up for auction is 4 cutting wheel arbors. 1/4" shaft's, in good used condition. Happy bidding! I do combine shipping for US buyers. Buyers using the International Shipping program are not eligible for combined shipping I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! Payment is due within 72 hours end of auction.
|
|