Nose Assy Air Hydraulic Rivet Gun Nose Assembly Pneumatic Alligator Rivet Pulling Head Air Hydraulic Rivet Huck 353 Air Hydraulic Riveter Rivet Gun Rivet Cherrymax Bucking Bar Aircraft Piece Rivet Rivet Squeeze Emhart Pneumatic Rivet Puller Pneumatic Pop Rivet Gun 4X Rivet Gun Offset Rivet Air Pop Rivet Chicago Pneumatic Rivet Gun Ati Snap 1 8 Rivet Hydraulic Rivet Gun Blind Rivet Rivet Set 401 Shank Fsi D-100 Pneumatic Rivet Squeezer Textron Cherrymax Rivet Gun Nose Chicago Pneumatic Alligator Offset Rivet Set Compression Rivet Jiffy Uat Pneumatic Pop Rivet Emhart Pop Huck 352 3X Rivet Gun Rivet Gun Model Industrial Rivet Pneumatic Squeezer Huck 99 Rivet Fastener Rivet Gun Set Cherry Textron Avdel Cherry Max Squeezer Aircraft 8 Rivet Set Flush Rivet Set Ati Snap-On Rivet Set 1 Rivet Hammer Cherry Pneumatic Hydraulic Rivet Ati Snap On Tools Bucking Bar 3 16 Rivet 1 4 Rivet Aircraft Tools Snap 3 16 Rivet Set Pneumatic Compression Rivet Pneumatic Hydraulic Rivet Alligator Rivet Cherry Rivet Rivet Gun Air Hammer 401 Shank 5 32 Rivet Set Yoke Rivet Blind Rivet Gun Cherry Riveter Rivet Machine Sheet Metal Rivet Rivet Gun Aircraft Tools Pneumatic Rivet Hammer Riveter Machine Rivet Gun Kit Huck Rivet Gun Aircraft Tools Chicago Pneumatic Aircraft Rivet Sets Aircraft Tools Cleco Pop Rivet Gun Huck Nose Piece Rivet Set Lockbolt Nose Assy Cherrymax Pneumatic Aircraft Tools 2 Hand Rivet Chicago Pneumatic Rivet Aircraft Tools Ingersoll Rand Pulling Head Gage Bilt Pneumatic Blind Heavy Duty Rivet Aircraft Tools 5 16 Nose Rivet Model Cherry Rivet Gun Cherrylock Blind Fastener Tungsten Bucking Bar Cherrymax Huck Pneumatic Aircraft Rivet Huck 200 Aircraft Tools 7 2X Rivet Gun Olympic Allfast Aircraft Tools Atlas Copco Dayton Pneumatic Aircraft Tools Aro Aircraft Tools Jiffy Rivet Nut Rivnut Tool Chicago Pneumatic 4X Rivet Gun Pneumatic Air Rivet Gun Rivet Squeezer Aircraft Tools Apt Pop Rivetool Aircraft Tools Dotco Pop Rivet Pneumatic Hydraulic Rivet Gun Tools Ingersoll Rand Avc Tools Bucking Bar Huck Rivet Rivet Puller Gun Aircraft Tools 10 Huck Gun Roller Ratchet Aircraft Aviation Tools Aircraft Tools 8 Aircraft Sheet Metal Tools Riveting Machine Pneumatic Air Rivet Cp-214 Rivet Pneumatic Rivet Puller Cp 351 Rivet Set 498 Shank 1 4 Nose Huck 2025 Roller Ratchet Aircraft Tools Aircraft Tools Sioux Rivet Pulling Head Nose Cherry Max Rivet Cleco Runner Chicago Pneumatic Cp Hi Shear Nose Piece Aircraft Hydraulic Blind Rivet 3 16 Air Head Aircraft Pneudraulic Rivet Cherry G784 Aircraft Tools 4 Offset Rivet Pulling Head Nose Piece Aircraft Tools 3 Fsi Chicago Pneumatic Cp214 Rivet Shaver Alligator Squeezer American Pneumatic Jiffy Uat 5 Tools Huck Countersink Cages Cupped Rivet Set Aircraft Tools Rockwell Pneumatic Lockbolt Fastener Installation Textron Aerospace Aircraft Rivet Gun Straight Pulling Head 9 32 Nut Runner Collar Runner Prg 510 Fsi Pt-100 Hydraulic Pop Rivet Aircraft Tools 4 Pc Rivet Bucking Bar Aircraft Tools 1 Ati Snap On Tools 3 United Air Tools Air Rivet Gun Prg 510 Pneumatic Right Angle Pulling Head Electric Rivet Gp Lockbolt Rivet Gun Aircraft Rivit Gun Cherrylock Rivet Rivet Set Air Riveter Huck 200 Rivet Tools 5 32 Jiffy Air Tools Emhart Teknologies Angle Rivet Hi Lok Collar Bucking Bar Set Avc 13 Hi Lok 1X Rivet Cherry Textron Aerospace
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
545
Buy It Now
$0 Shipping
Condition: Used
Location: Crestview,FL,USA
$
395
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Crestview,FL,USA
$
550
Buy It Now
$12.5 Shipping
Condition: New
Location: Ardmore,TN,USA
$
299.99
Buy It Now
Free Shipping
Condition: Used
Location: Valencia,CA,USA
$
119.99
Buy It Now
$0 Shipping
Condition: New
Location: Romulus,MI,USA
$
95
Buy It Now
$9.25 Shipping
Condition: Used
Location: San Antonio,TX,USA
$
52
Buy It Now
$0 Shipping
Condition: New
Location: Crestview,FL,USA
$
699.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Houston,TX,USA
$
199.99
Buy It Now
$0 Shipping
Condition: Used
Location: Rockledge,FL,USA
$
239.99
Buy It Now
$0 Shipping
Condition: Used
Location: Rockledge,FL,USA
$
450
Buy It Now
$15 Shipping
Condition: Used
Location: San Antonio,TX,USA
$
865
Buy It Now
$0 Shipping
Condition: New
Location: Romulus,MI,USA
$
750
Buy It Now
$35 Shipping
Condition: Used
Location: Canyon Lake,TX,USA
$
785
Buy It Now
$18 Shipping
Condition: Used
Location: Georgetown,TX,USA
$
325
Buy It Now
Free Shipping
Condition: Used
Location: Acworth,GA,USA
$
225
Buy It Now
$50 Shipping
Condition: Used
Location: Haysville,KS,USA
$
375
Buy It Now
Free Shipping
Condition: Used
Location: Acworth,GA,USA
$
500
Buy It Now
$0 Shipping
Condition: Used
Location: Muscle Shoals,AL,USA
In great working shape painted for protection ready to use Best riveter I have ever owned shutting down business
$
1,695
Buy It Now
$0 Shipping
Condition: New
Location: Romulus,MI,USA
$
350
Buy It Now
Free Shipping
Condition: Used
Location: Farmington,MI,USA
$
450
Buy It Now
$30 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
350
Buy It Now
Free Shipping
Condition: Used
Location: DeLand,FL,USA
CHICAGO PNEUMATIC CP 251 RIVET SQUEEZER AEROSPACE COMPRESSION RIVETER TOOL USED CHICAGO PNEUMATIC CP-251 C COMPRESSION RIVETER RIVET SQUEEZER TOOL USED ... moreTHIS AUCTION IS FOR A USED CHICAGO PNEUMATIC AEROSPACE SQUEEZE RIVETING TOOL. THE TOOL IS USED AND HAS SOME WEAR BUT IN PERFECT WORKING CONDITION. PERFECT FOR AEROSPACE APPLICATION OR ANY SHEET METAL APPLICATION OR JOB YOU WANT TO THROW AT IT. THE TOOL DOES NOT INCLUDE.187 RIVET SETS THE AUCTION IS FOR THE SQUEEZE RIVET TOOL ONLY. Model: CP-251-C USED, Manufactured by: Chicago Pneumatic, Specifications CP- 251- C Part Code: CP 251, Weight lbs. 8 1/2 lbs. RIVET SET SIZE Length Inches 30" Capacity ALUM. in/mm 5/32" STEEL in/mm 1/8" Duralumin 1/8" Reach 2 1/8" Gap 7/8" Description:Used Chicago Pneumatic CP- 251- C Compression Riveter"Rivet Squeezer" Great used unit great savings over a new unit. Features: one man operation increases productivity. squeeze action permits easy control. Exceptional accuracy and uniformity. high joint integrity independent of operator skill level. quiet operation. force applied to rivet is adjustable by operator plunger speed can be controlled by throttle. See our store for more island themed products and more at http:stores.shop.ebay.com/savingsinthesun Pay Pal only accepted for payment. Shipping is free in the United States item ships within 24 hours of confirmation of payment from Paypal. If any questions or concerns you can contact us thru E b a y.
$
899.95
Buy It Now
Free Shipping
Condition: New – Open box
Location: Las Vegas,NV,USA
$
1,488
Buy It Now
$11 Shipping
Condition: Used
Location: Germantown,TN,USA
$
650
Buy It Now
$25 Shipping
Condition: Seller refurbished
Location: Tacoma,WA,USA
$
1,150
Buy It Now
$0 Shipping
Condition: Used
Location: Papillion,NE,USA
$
795
Buy It Now
Free Shipping
Condition: Used
Location: Gardena,CA,USA
$
20.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
57.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
74.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
39.99
Buy It Now
$0 Shipping
Condition: New
Location: Romulus,MI,USA
$
33
Buy It Now
$0 Shipping
Condition: New
Location: Crestview,FL,USA
$
34.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
179.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
19.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Denver,CO,USA
$
18.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
35
Buy It Now
$4.5 Shipping
Condition: Used
Location: Lynnwood,WA,USA
$
79.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
29.99
Buy It Now
$0 Shipping
Condition: New
Location: Romulus,MI,USA
$
34.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
24.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Dimple Die Rivet Sets 1/8" AN426 100 degree- New Highest quality dimple die sets rivet squeezer sets on the market. Only high alloy steels are used ... morein the manufacturing of these squeezer sets. All shanks are precision ground. Flush surface is polished to a high lustre. Heat treated to exacting standards in order to ensure long wear and tool life. 187 shank size Designed for AN426 Rivet 1/8" Rivet Size We carry many different types and sizes of rivet squeezer sets in stock. We also carry pneumatic and hand riveting tools for all of your riveting requirements. Please email with any questions. The Tools the Pro’s use… All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e0b1dfd4a-0xff-
$
65
Buy It Now
Free Shipping
Condition: New
Location: Glenside,PA,USA
$
34.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
20.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
9.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
9.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Round Head AN442 Rivet Squeezer Set- New Highest quality squeezer sets on the market. Only high alloy steels are used in the manufacturing of these squeezer ... moresets. All shanks are precision ground. Cuppings are polished to a high lustre. Heat treated to exacting standards in order to ensure long wear and tool life. 0.187 shank size fits pneumatic or hand rivet squeezers For 1/4" Flat Head Rivet Diameter Flat Head AN4442 head cupping 1/4" Body length SM200-4428 Made in USA We carry many different types and sizes of rivet and squeezer sets in stock. We also carry pneumatic and hand riveting tools for all of your riveting requirements. Please email with any questions. The Tools the Pro’s use… All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide
$
19.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
10.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Round Head AN442 Rivet Squeezer Set- New Highest quality squeezer sets on the market. Only high alloy steels are used in the manufacturing of these squeezer ... moresets. All shanks are precision ground. Cuppings are polished to a high lustre. Heat treated to exacting standards in order to ensure long wear and tool life. 0.187 shank size fits pneumatic or hand rivet squeezers For 1/8" Flat Head Rivet Diameter Flat Head AN4442 head cupping 1/4" Body length SM200-4424 Made in USA We carry many different types and sizes of rivet and squeezer sets in stock. We also carry pneumatic and hand riveting tools for all of your riveting requirements. Please email with any questions. The Tools the Pro’s use… All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide
$
10.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Round Head AN442 Rivet Squeezer Set- New Highest quality squeezer sets on the market. Only high alloy steels are used in the manufacturing of these squeezer ... moresets. All shanks are precision ground. Cuppings are polished to a high lustre. Heat treated to exacting standards in order to ensure long wear and tool life. 0.187 shank size fits pneumatic or hand rivet squeezers For 5/32" Flat Head Rivet Diameter Flat Head AN4442 head cupping 1/4" Body length SM200-4425 Made in USA We carry many different types and sizes of rivet and squeezer sets in stock. We also carry pneumatic and hand riveting tools for all of your riveting requirements. Please email with any questions. The Tools the Pro’s use… All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide
$
5.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Denver,CO,USA
$
10.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Round Head AN442 Rivet Squeezer Set- New Highest quality squeezer sets on the market. Only high alloy steels are used in the manufacturing of these squeezer ... moresets. All shanks are precision ground. Cuppings are polished to a high lustre. Heat treated to exacting standards in order to ensure long wear and tool life. 0.187 shank size fits pneumatic or hand rivet squeezers For 3/16" Flat Head Rivet Diameter Flat Head AN4442 head cupping 1/4" Body length SM200-4426 Made in USA We carry many different types and sizes of rivet and squeezer sets in stock. We also carry pneumatic and hand riveting tools for all of your riveting requirements. Please email with any questions. The Tools the Pro’s use… All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide
$
12.99
Buy It Now
$0 Shipping
Condition: New
Location: Romulus,MI,USA
Universal Head AN470 Rivet Squeezer Set- New Highest quality squeezer sets on the market. Only high alloy steels are used in the manufacturing of these ... moresqueezer sets. All shanks are precision ground. Cuppings are polished to a high lustre. Heat treated to exacting standards in order to ensure long wear and tool life. 0.187 shank size fits pneumatic or hand rivet squeezers 1/4" Rivet Diameter Universal AN470 head cupping 1/4" Body length SM200-4708 Made in USA We carry many different types and sizes of rivet and squeezer sets in stock. We also carry pneumatic and hand riveting tools for all of your riveting requirements. Please email with any questions. The Tools the Pro’s use… All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide
$
9.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
9.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Round Head AN30 Rivet Squeezer Set- New Highest quality squeezer sets on the market. Only high alloy steels are used in the manufacturing of these squeezer ... moresets. All shanks are precision ground. Cuppings are polished to a high lustre. Heat treated to exacting standards in order to ensure long wear and tool life. 0.187 shank size fits pneumatic or hand rivet squeezers For 3/16" Round Head Rivet Diameter Round Head AN430 head cupping 1/4" Body length SM200-4306 Made in USA We carry many different types and sizes of rivet and squeezer sets in stock. We also carry pneumatic and hand riveting tools for all of your riveting requirements. Please email with any questions. The Tools the Pro’s use… All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide
$
6.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Universal Head AN470 Rivet Squeezer Set- New Highest quality squeezer sets on the market. Only high alloy steels are used in the manufacturing of these ... moresqueezer sets. All shanks are precision ground. Cuppings are polished to a high lustre. Heat treated to exacting standards in order to ensure long wear and tool life. 0.187 shank size fits pneumatic or hand rivet squeezers 3/16" Rivet Diameter Universal AN470 head cupping 1/4" Body length SM200-4706 Made in USA We carry many different types and sizes of rivet and squeezer sets in stock. We also carry pneumatic and hand riveting tools for all of your riveting requirements. Please email with any questions. The Tools the Pro’s use… All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide
$
10.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
10.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Round Head AN442 Rivet Squeezer Set- New Highest quality squeezer sets on the market. Only high alloy steels are used in the manufacturing of these squeezer ... moresets. All shanks are precision ground. Cuppings are polished to a high lustre. Heat treated to exacting standards in order to ensure long wear and tool life. 0.187 shank size fits pneumatic or hand rivet squeezers For 3/32" Flat Head Rivet Diameter Flat Head AN4442 head cupping 1/4" Body length SM200-4423 Made in USA We carry many different types and sizes of rivet and squeezer sets in stock. We also carry pneumatic and hand riveting tools for all of your riveting requirements. Please email with any questions. The Tools the Pro’s use… All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide
$
6.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Universal Head AN470 Rivet Squeezer Set- NEW Highest quality squeezer sets on the market. Ony high alloy steels are used in manufacturing of these squeezer ... moresets. All shanks are precision gound. Cupping are polished to a high lustre. Heat treated to exacting standards in order to ensure long wear and tool life. 0.187" shank size fits pneumatic and hand rivet squeezers. 1/8" Rivet Diameter(measure rivet body) Universial AN470 head cupping 1/4" body length(contact for other sizes) SM200-4704 Made in USA We carry many different types and sizes of rivet squeezer sets in stock. We also carry pneumatic and hand riveting tools for all of your riveting requirements. Please email any questions. The Tool's the Pro's use. All tools inspected and operated before you receive them. Money back*Guaranteed* We Ship Worldwide
$
9.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Round Head AN30 Rivet Squeezer Set- New Highest quality squeezer sets on the market. Only high alloy steels are used in the manufacturing of these squeezer ... moresets. All shanks are precision ground. Cuppings are polished to a high lustre. Heat treated to exacting standards in order to ensure long wear and tool life. 0.187 shank size fits pneumatic or hand rivet squeezers For 1/4" Round Head Rivet Diameter Round Head AN430 head cupping 1/4" Body length SM200-4308 Made in USA We carry many different types and sizes of rivet and squeezer sets in stock. We also carry pneumatic and hand riveting tools for all of your riveting requirements. Please email with any questions. The Tools the Pro’s use… All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide
$
20.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
1 2
 In 

Past Items  
 
Payment from Confirmed Paypal Address only please. As pictured Chicago Pneumatic Alligator Squeezer Compression Riveter Looks like the model number rubbed off. Guaranteed to work My Motto: Most items will ship within one business day I always aim to have the lowest price. If you find a lower price item of the same type and quality, please let me know and I will work with you on price Please ask any questions Guaranteed to work as stated. Or your money back I do my best to listing items as accurately as I can. If you have any problem with the item you purchased please contact me and I will resolve the issues Any returns must be in the same condition as purchased else there will be a 20% charge Please Examine Photographs Closely As They Are An Important Part Of The Listing And Are A Part Of The Description Of The Listed Item Please do not assume ... morethat anything else comes besides what is pictured. Thank you 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13e045d9ca4-0x100-
This is a very nice Chicago Pneumatic 351A rivet squeezer. It has a very smooth action and throttle. It uses standard 3/16" 187) shank rivet squeezer sets. It comes with a 9" deep heavy duty jaws. The end of the jaws has some sanding but it in no way effects the operation or strength of the tool. It is pictured. This is the best large squeezer you can buy and the one all the others copied. It sells for over $3000 new. This tool has been lightly used and well taken care of. It will last you for years. It have a couple of light engravings.
◊◊◊◊◊ U.S. AIR TOOL CO ◊◊◊◊◊ 34-720C C-Yoke Type Pneumatic Portable Rivet Squeezer with 64-C1 C Yoke 5/32" Steel Rivet Capacity 3/16" Aluminum Rivet Capacity 1-7/16" Reach 1-1/4" Gap Tandem Cylinder Style 90 PSI Pressure 14" Overall Length For cold squeezing and setting of solid rivets I really don't think this squeezer has been used much if at all. But I have no factory packaging or documentation RETAILS OVER $1411.00! FREE PRIORITY MAIL SHIPPING! THIS LISTING INCLUDES ONLY THE ITEMS SHOWN IN THE PICTURES Local pick up is always welcomed. Our goal is satisfied customers! If there is anything we can do. Please just ask. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e089901b4-0x103-
Chicago Pneumatic Alligator Squeezer Compression Riveter CP-214 Description- Model: CP-214- Manufacturer: Chicago- Aluminum Capacity: 1/ 8" Steel Capacity: 3/ 32" Compression Capacity: 3000 lbs- Throat Depth: 1.5" Open Height: 1.5" Closed Height: 7/8" These riveters have been tested and are guaranteed to be in good working condition. You will randomly receive one of the 2 pictured. 6679( JK)11/9/12 Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received ... more5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with
Here is a great working US Tool 114TC Tandem Cylinder Rivet Squeeze Model US114TC Yoke YK1-3-3 3 Inch Reach 3 Inch Gap Check out US Tool website for more specs Thanks for bidding and good luck! Free US Shipping. Feel free to ask questions!
Chicago Pneumatic Pneumatic Compression Riveter 351C– Rebuilt Professional pneumatic Rivet Squeezer“C” yoke. Designed to squeeze the rivet rather than hammering. This is a much quiter method, but more importantly, it allows each rivet to be identical to each other. These tools are very simple to operate. A single squeeze to the throttle lever will deliver the tools full force of squeezing pressure. There are many uses for rivet squeezers, including aviation, automotive, marine, computer industries, etc… We carry an extensive supply of repair parts. Yokes and rivet sets for riveting equipment. Specifications: High Quality Aluminum rivet capacity– 3/16” Steel rivet capacity– 5/32” Yoke reach– 2 1/8” Closed height– 25/32” Rivet set shank diameter- 187 Max Force– 6.000lbs Max rivet set travel- 9/16” Overall length– 17 ½” Weight– 12.5 lbs ... moreWarranty– 1 year Free UPS Domestic Shipping(US Only) Please email any questions… All tools tested by our expert tool mechanics… Over 75 years experience in supplying high quality tools. The Tools the Pro’s use” We Ship Worldwide One Year Warranty Parts. Labor, and/or Replacement This warranty covers any parts that are found defective as to material or workmanship.
Call Brett At 309-261-5695 for questions. n5 Chicago Pneumatic CP-214 Compression Rivet Squeezer Setter. My only test was to hook up air a nd make trigger worked and compressed. Not e photos 5 and 6 showing anvil side insert has crack. One 1/4" insert shown and included View all photos carefully. Check out my! Payment due within 7 days of auctions end.
Used aviation rivet squeezer.
AN470 set with.187 shank. Comes only with pieces shown. Missing many pieces. In fitted case. Buyer pays 7.70 USPS shipping. I accept returns. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ee0c715cf-0x104-
Complete AN470 set with.187 diameter shanks in excellent used condition in fitted case. Cupped and flush. Buyer pays 8.80 USPS shipping. I accept returns.
APT Pneumatic"C" Rivet Squeezer Riveter Specifications- Model: 740- Aluminum Capacity: 3/16" Steel Capacity: 5/32" Throat Depth: 2.125" Closed Height: 25/32" Maximum Force at 90 PSI: 6.000 lbs- Max Travel: 9/16" Final Part of Stroke at Max Force: 0.125- Length: 17-1/2" Weight w/ Yoke: 12.5 lbs- Tested and is working great! 5974( JK)7/5/12 Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your ... morefeedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS ha
The Model 6000C Hand Held Tool features a lightweight twin tandem cylinder for added power. Developing 6000 lbs. total compressive force. It provides maximum power at minimum weight. Compact and easy to handle, this tool is first choice where additional power is required. The 6000C utilizes interchangeable"C" yokes. Maximum Rivet Diameter 3/16" Aluminum 5/32" Steel Buyer from the US lower 48 states pays $17.00 for shipping and handling. Feel free to email with any questions. Thank you for looking. Please check my other auctions for more Items.
Atlantic Pneumatic Alligator Squeezer Compression Riveter 60A Description- Model: 60A- Manufacturer: Atlantic- Cylinder Style: Tandem- Aluminum Cap acity: 1/8" Steel Cap acity: 3/32" Compression Capacity: 3.400 lbs- Throat Depth: 3" Open Height: 1.75" Closed Height: 3/4" These riveters have been tested and are guaranteed to be in good working condition. You will randomly receive one of the 6 pictured. 6672( JK)11/8/12 Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If ... moreyou feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a
Works Great. Rivet squeezer.
aims AATC COMMERCIAL PNEUMATIC RIVET SQUEEZER#0314TC + ARO FOOT PEDAL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by AATC Commercial& Aro. This is a Pneumatic Rivet Squeezer + Foot Pedal in good condition. Model# 0134TC(Squeezer) E212FS-G(Pedal) Specifications: Head Dimensions: 10" x 13" x 1-1/2" thick. Throat: 8-3/4" deep. Air inlet: 1/4 NPT. Overall length: 18-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. AATC COMMERCIAL PNEUMATIC RIVET SQUEEZER#0314TC + ARO FOOT PEDAL ... moreAATC COMMERCIAL PNEUMATIC RIVET SQUEEZER#0314TC + ARO FOOT PEDAL AATC COMMERCIAL PNEUMATIC RIVET SQUEEZER#0314TC + ARO FOOT PEDAL Reliable Tool Inc. c 2011 | Powered by
aims AMERICAN PNEUMATIC TOOL- PNEUMATIC RIVET SQUEEZER#725 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by American Pneumatic Tool. This is a Pneumatic Rivet Squeezer in good condition. Model# 725 Specifications: Head Dimensions: 5" x 4" x 1/2" thick. Throat: 2-1/2" deep. Air inlet: 1/4 NPT. Overall length: 15" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. AMERICAN PNEUMATIC TOOL- PNEUMATIC RIVET SQUEEZER#725 Reliable Tool Inc. c 2011 | Powered by
AMERICAN PNEUMATIC TOOL- PNEUMATIC RIVET SQUEEZER#725 You get both tools and both are model 725 the one on the right is in tact and works fine the one on the left is missing the lever that works the trigger not sure about it both came from estate sale. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13fea12bfbd-0xf0-
Lightly used CP 214 style tandem cylinder rivet squeeze in perfect working condition. CP riveters are the best on the market for serious daily use and this model sells for over $2000. These are found in most large aircraft production facilities. There is some markings from previous owner. This riveter has no problem squeezing 3/16" AD rivets and 5/32 titanium. It may do even larger rivets depending on material type. Tandem cylinder squeezers have twice the compression force than a single.
Used APT Rivet squeezer compression riveter alligator/ A type in good working condition. Tandem cylinders give twice the squeeze force of single cylinders. 2 1/4" throat depth. This squeeze has custom(machine shop made) inserts installed to accept 3/16" standard rivet dies or simply drive out the inserts to install 1/4" rivet dies.
See Pics. Squeezers perform good(no leaks) with 5/32 rivets AD. I only had 6/32 DD rivets and machine started to but did not crush it. This will handle a 5/32 AD rivets and smaller just fine. Dies not included.
See Pictures. One Jaw was reduced in its prior life. I'm guessing to fit in some tight spot-see pictures) Squeezers works great. It crushed all the types of 5/32 rivets I had in my tool box. No leaks. Regulator and gap jaw adjuster works. Dies not included. Bid/buy with confidence I strive for your satisfaction and my 100% rating. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-14052d7b633-0xfd-
See Pictures. Squeezers works great! Crushes rivets! No hesitation. Everything works. Bid/ buy with confidence I strive for a 100% rating. Dies not included.
214 style single cylinder hand squeeze. Yoke measures 2.6" from the back-to the center of set post. Atlantic air tool company inc. Model 30c. 1/8 rivet capacity. Used. Feather trigger works. Posted with
This is a vintage Thor rivet squeezer in good working condition.
Rivet Squeezer for riveting together metal. These are used in the aircraft industry. This is a 151-TC U.S. Industrial 151-TC C-Yoke Riveter Riveting Tool(Tandem Cylinder) If you have any questions feel free to ask thanks for looking.
This is a Chicago Pneumatic CP0214 ENFEL tandem cylinder rivet squeezer. It works like new. No grinding or sanding on the tool. It is surplus from Boeing. It has 2-1/4" jaws and uses standard 3/16" sets. This is the best quality rivet squeezer made bar none and the one all others copied. Sells new for over $2500.
Single cylinder Chicago pneumatic rivet squeezer. Yolk is 1.5" deep and 3" high. Works very well. Normal usage wear. Piston shaft uses 3/16 sets. Upper yolk set is screwed in. Looks to be for flaring or rolling a button or snap. Posted with eBay Mobile
This large"a" rivet squeezer is the real deal. It even has foot control. This will reach in a get to those that otherwise would have to use a gun. It has a full 9" reach. The squeezer hooked up to the cable in the picture is not the one you will receive. You will receive the bare tool pictured. I will ship in 2 boxes. Check out my other auctions for some other drills and huck guns. I am listing new tools everyday. If you have any questions or would like to combine let me know. Thanks for looking. I will ship international but the cost is up to the buyer. Posted with
Tested her with AD-6 Rivets and she crushed them! note* this tool used the larger 1/4" inserts. Bid with confidence. Money back guarantee. 10 percent will go to Operation Smile.
Description Click to Enlarge Click to Enlarge Buyer receives 1 USED WORKING APTC 710 RIVET COMPRESSION TOOL. AMERICAN PNEUMATIC TOOL CO. PLEASE CLICK ON THE PICTURES TO GET A LARGER MORE DETAILED VIEW OF THE ITEM. We do our best to describe all items to the best of our ability.Please do not assume that accessories or the condition is other than described in the description.Any questions please feel free to ask. Sorry no international customers at this time. Payment Terms Shipping Terms Just one of inkFrog's Creations inkfrog terapeak. I000000.
Air powered compression riveters deliver a squeezing action. Which drives the rivet by“Flowing” the rivet metal with compressed forces. Squeezing action is obtained by coupling an air cylinder and piston to a wedge or cam, thus multiplying the original force by a great deal. Lock off throttle- reduces the risk of accidental operation- rivet set type: CR-1- aluminum capacity: 1/8" steel capacity: 3/32" std. yoke reach: 1.5" std. yoke closed height: 11/16" max force: 3000 lbs. moving plunger max travel: 9/16" final part of stroke at max force: 050" cylinder type: single- noise level 90 dB(A) length: 11 inches- weight: 4.5 lbs. ordering part no. T012344 GREAT WORKING CONDITION ALMOST NEW
Up for sale I have this Riveter. It is in good working condition with regular use wear. Check out the pictures. Thanks. Posted with
Used General Pneumatic riveting tool. $14 shipping to the US
Up for auction is a American Pneumatic Tool rivet squeezer. Model# 72* I cannot see the last didget. I put shop air on this and it cycled just fine, I have no fasteners to test with. Happy bidding! I do combine shipping. Buyers using the International Shipping Program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! Posted with
THIS IS AN AWESOME RIVET SQUEEZER WITH ALOT OF POWER BEHIND IT. I HAVE USED THIS MANUFACTURE AND MODEL SQUEEZER ON PRIOR PROJECTS AND IT IS AWESOME. ALSO OPEN TO TRADES FOR THIS TOOL MESSAGE ME WHAT YOU GOT! I HAVE DISASSEMBLED THE ENTIRE TOOL. CLEANED, INSPECTED, AND APPLIED SYNTHETIC GREASE TO INTERNAL PARTS FOR LONG LASTING OPERATION. REPLACED ALL ORINGS. VALVE BODY OPERATES SMOOTH. A VIDEO OF IT WORKING CAN BE AVAILABLE ON REQUEST. TOOL HAS BEEN REFINISHED WITH PPG POLY URETHANE PAINT. THIS IS A GREAT BUY FOR A SHEET METAL TECH LOOKING TO ADD THIS TO HIS OR HER BOX. NO MORE RUNNING TO THE TOOL ROOM. THIS IS PRICED AFFORDABLE TO THE WORKING MAN WITH GOOD QUALITY OPERATION. I sell for aircraft techs at a low cost and great tools. Not to make a big profit like the others guys. Purchase from some who is an A&P IA who knows what its like ... moreto buy the high dollar tools. I purchase low and share with the community. ANY QUESTIONS PLEASE FEEL FREE TO ASK. Air powered compression riveters deliver a squeezing action. Which drives the rivet by“Flowing” the rivet metal with compressed forces. Squeezing action is obtained by coupling an air cylinder and piston to a wedge or cam, thus multiplying the original force to extreme ratios. High compressive forces are obtained from a relatively compact unit having small diameter cylinders and using very little compressed air. Extensively used in assembly of aircraft. Trucks, buses, boats, appliances, automotive components, metal furniture, toys and electronic chassis. Actuation throttle guard- reduces the risk of accidental operation- Short stroke adjustment- aids positioning of the tool(limits the return travel of the moving set of the tool on the rivet to reduce the starting clearance between rivet and rivet sets) rivet set type: CR-1- aluminum capacity: 5/32" steel capacity: 1/8" std. yoke reach: 2 7/8" std. yoke closed height: 7/8" max force: 5200 lbs. moving plunger max travel: 5/8" final part of stroke at max force: 125" cylinder type: single
Recoules- Cooper Tools Pneumatic Rivet Squeezer- Squeezer operates normaly. Uses 3/16 rivet squeezer sets, squeezer trigger partially broken. Squeezer was ground down on one edge to fit into tight location. Sold as is because of broken trigger. 11 1/2 long X 3 1/2,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-144f275fd1b-0x111-
HERE WE HAVE BIG LOT OR PNEUMATIC RIVET SHANKS INSERTS- SQUEEZER DIMPLE DIES- AIRCRAFT TOOL. PLE ASE SEE THE PICTURE TO SEE THE CONDITION TO THE ITEM. THE ITEM YOU SEE N THE PICTURE IS THE ITEM YOU WILL BE RECEIVING. ONLY WHAT IS PICTURE IS WHAT IS INCLUDED IN THE AUCTION. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACCURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNESDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY ... moreNO INTERNATIONAL TRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES.
Chicago Pneumatic"C" Rivet Squeezer Compression Riveter. CP Heavy Duty Complete with foot pedal and regulators as shown all in good working condition This item was Surplus to a local GE Factory Ready to use if you live local and pick the item up i also have the heavy dury metal cart that it came with i will throw in for free just heavy to ship FREE PRIORITY SHIPPING Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive. I go to the post office at everyday at 1.00pm Monday- Friday. If an item is bought and payed for before then item will be send it the same day. If any later it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please visit and subscribe to my eBay Store and ... moreFacebook Page for more great items and friendly. Reliable customer service. And Great deals. Thank You For Viewing
CHICAGO PNEUMATIC CP 251 RIVET SQUEEZER AEROSPACE COMPRESSION RIVETER TOOL USED CHICAGO PNEUMATIC CP-251 C COMPRESSION RIVETER RIVET SQUEEZER TOOL USED THIS AUCTION IS FOR A USED CHICAGO PNEUMATIC AEROSPACE SQUEEZE RIVETING TOOL. THE TOOL IS USED AND HAS SOME WEAR BUT IN PERFECT WORKING CONDITION. PERFECT FOR AEROSPACE APPLICATION OR ANY SHEET METAL APPLICATION OR JOB YOU WANT TO THROW AT IT. THE TOOL DOES NOT INCLUDE.187 RIVET SETS THE AUCTION IS FOR THE SQUEEZE RIVET TOOL ONLY. Model: CP-251-C USED, Manufactured by: Chicago Pneumatic, Specifications CP- 251- C Part Code: CP 251, Weight lbs. 8 1/2 lbs. RIVET SET SIZE Length Inches 30" Capacity ALUM. in/mm 5/32" STEEL in/mm 1/8" Duralumin 1/8" Reach 2 1/8" Gap 7/8" Description:Used Chicago Pneumatic CP- 251- C Compression Riveter"Rivet Squeezer" Great ... moreused unit great savings over a new unit. Features: one man operation increases productivity. squeeze action permits easy control. Exceptional accuracy and uniformity. high joint integrity independent of operator skill level. quiet operation. force applied to rivet is adjustable by operator plunger speed can be controlled by throttle. See our store for more island themed products and more at http:stores.shop.ebay.com/savingsinthesun Pay Pal only accepted for payment. Shipping is free in the United States item ships within 24 hours of confirmation of payment from Paypal. If any questions or concerns you can contact us thru E b a y.
Up for auction is a Sioux rivet squeezer. Model# SZEA 7030, works well but I have no fastener to test with. 3/16" hole size for sets. Happy bidding! I do combine shipping for US buyers ONLY. Buyers using the International Shipping program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! Posted with
Chicago Pneumatic# CP351• Rivet Squeezer When Inspecting this item- It was hooked up to an air supply. With lever depressed the piston does engage and come out. When lever is let go. The piston disengages, and the piston recesses back. Item does show signs of use. Including scuffs/ scratches(see pictures) PLEASE Inspect ALL Pictures. And ask ANY/ALL Questions and/or Concerns Prior to Bidding/Buying. DON'T WORRY ABOUT SHIPPING. WE'VE GOT THAT COVERED! Have a look at our store for more deals! ITEMS are being added to the store and/or auction EVERYDAY! SWAP AND TRADE HAS A LITTLE BIT OF EVERYTHING. BOOKMARK US! SUBSCRIBE! Or Just Keep On CHECKING Back. You Never Know What We'll List NEXT! PAYMENT IS EXPECTED WITHIN 3 DAYS FROM WHEN LISTING ENDS. Any Item over $150.00 will ship with Signature Required* FREE SHIPPING is ONLY for any ... moreitem being shipped within the continental(Lower 48) United States. If shipping to Alaska. Hawaii, or any U.S. Territory- Please contact me through ebay messages to see if there will be any additional charges incurred, prior to bidding/buying. I do not ship international. Thank You. Powered by SixBit's eCommerce Solution,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1453fc83da2-0x10e-
One Chicago Pneumatic Rivet Squeezer Body. Model No. CP-0214- COMP. RIV. TOOL This squeezer is made in the USA. Tool has been tested and it is in good working order. Tool pictured is the one you will receive. I combine shipping when possible. Thanks for looking. Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-145a100c302-0x112-
American Pneumatic Air Riveter Squeezer Alligator Head Model APT 725 This is a working double piston Riveter It has been tested with rivets shown in last picture Comes with two(2) 1 lb. bags of Allfast solid rivets- 3/16" I have more rivets available if needed For questions contact text 562.234.1413
Atlantic Air Tool Co. Pneumatic C- Squeeze 4" jaw Model 60C SR00929 4 Squeeze sets
cp rivet squeezer used it works when you put air to it i have never used this don't have any anvils for it
APT 735 A rivet squeeze. Yolk Pivot bolt sheared. One bolt missing as shown in photo. Good condition still operates. Uses 3/16 shank squeeze sets. Normal usage wear.
This auction lot is for an excellent used condition pneumatic rivet squeezer made by Chicago Pneumatic. Model# CP-0214. 1.4" yoke opening and 3.0" throat. 6000 lbs force. Twin tandem cylinders. Tested and works great. What you see are the actual pictures. Accepts 1/4" shank rivet dies. I don't have any rivet die to come with this tool. You can buy them at the yardstore.com. Excellent for many assembly operations- used in aircraft. Automotive, truck, bus components, boats, metal furniture, toys, electronic chassis and appliance assembly. One-man operation increases productivity* Rolling cam and wedge assembly greatly multiplies compression force of piston* Squeeze" action permits easy control. Exceptional accuracy and uniformity* High joint integrity independent of operator skill level* Force applied to rivet is adjustable ... moreby operator* Speed of squeeze riveter can be controlled by throttle* Swivel air inlet aids maneuverability* Small size and light weight reduce operator fatigue* Safety throttle must be moved axially before being actuated. Reducing accidental actuation RIVET CAPACITY ALUM/ STEEL: 3/16" 1/8" FORCE: 6000 LBS LENGTH: 12" Shipping is just $14.50 within USA. Canada $33.00. I will combine shipping if you buy more than one item from me. This is used equipment. Buyer assumes all responsibility for liability. Inspection and safety check prior to use, the safe use and maintenance of this equipment. It will be assumed that by purchasing this item, the buyer knows and understands what this item is, and how to use it. Seller will not be responsible for any property damage or body injury. Any questions should be asked prior to buying. please check out my other ebay items. On Jul-02-08 at 17:56:32 PDT. Seller added the following information:
Up for auction here are 12(6 cupped and 6 flush) rivet dies for use in standard.187" shank pneumatic rivet squeezers. The longest is about 1" long and they have different style cuppings. Any other questions. Just ask.
Chicago Pneumatic CP-350 Specialty Aircraft Rivet Squeezer Riveter Riveting Tool CHICAGO PNEUMATIC SPECIALTY AUTOMOTIVE AIRCRAFT RIVETER TOOL! GOOD USED WORKING CONDITION! THROTTLE IS A BIT STICKY BUT NOT TOO BAD. COMES WITH THE FOLLOWING: MODEL NO. CP-350 S/N: H8398 JAW THROAT MEASURES 1.875" GAP X 2.125" REACH IN SIZE! THE TOOL MEASURES AROUND 13" IN LENGTH. USES YOUR STANDARD 1/4" NPT AIR FITTING! RUNS ON STANDARD 90 PSI! ACCEPTS 3/16" RIVET SETS! YOU CAN CUSTOMIZE THIS TOOL FOR MANY DIFFERENT JOB APPLICATIONS! THERE ARE DIFFERENT SIZE YOKES YOU CAN BUY AND RIVET SETS! WE MAY HAVE PARTS FOR THESE IN STOCK. EMAIL US WITH YOUR REQUEST! GREAT TOOL TO HAVE IN YOUR COLLECTION! MANY DIFFERENT APPLICATIONS FOR THIS TOOL USED IN THE AIRCRAFT AND AUTOMOTIVE INDUSTRY! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH ... moreUS! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! IF YOU FEEL SHIPPING IS TOO HIGH. JUST EMAIL US AND WE WILL TRY TO GET YOU A BETTER RATE. EBAY'S CALCULATOR DOES NOT ALWAYS SHOW THE BEST RATES! WE WILL GET YOU A PRICE THAT WILL MAKE YOU HAPPY! CHECK OUT OUR STORE FOR MORE GREAT DEALS! WE ARE POSTING NEW ITEMS EVERY WEEK! WE CARRY A LARGE INVENTORY OF ELECTRIC. PNEUMATIC, HYDRAULIC TOOLS& PARTS!
YOU ARE BUYING FROM A SELLER WHO HAS*ALWAYS* HAD 100% POSITIVE eBAY FEEDBACK SINCE 1999. NOT JUST IN THE PAST 12 MONTHS. BID OR BUY WITH CONFIDENCE! ITEM DESCRIPTION: This is a heavy duty Chicago Pneumatic CP-0214-CELEL C-Yoke Compression Rivet Squeezer Riveter. It is equipped with a C-Yoke with a 1 1/4” gap and a reach of 1 3/4” It is compatible with a wide variety of other yokes and standard rivet 3/16” squeezer dies. Comes with a standard 1/4” air connector on a rotating fitting and a copy of the parts list and operator’s manual. ITEM CONDITION: This tool appears to be in excellent overall condition and is very clean. It has been nicely refinished with a heavy coat of red industrial paint. It has a few minor cosmetic surface scratches. Nicks, and scuffs. I have thoroughly inspected, cleaned, polished and lubricated the tool. I tested the ... moretool on a few rivets with my own squeezer dies and it squeezes strongly and smoothly. It works great! PHOTOS: Here are some detailed photos of the exact item you are buying: SELLER’S TERMS AND CONDITIONS– PLEASE READ CAREFULLY! By purchasing or placing a bid on my item(s) You are agreeing to the following terms and conditions. GENERAL: Unless otherwise specified. The photo(s) shows the actual item I am selling. What you see in the photo(s) is what you get. In some cases, I re-use existing photos for a particular item. These photos ARE NOT the exact item being sold, but I guarantee that they are representative of the item you are buying. I guarantee you will receive an identical item in the same or better condition and appearance than what is shown in the photo(s) I do my best to accurately describe the actual condition of the item to help you make an informed purchase decision. Feel free to contact me with any questions. I recommend that you ask questions BEFORE you make a purchase or place a bid. All items are sold strictly as-is. RETURN POLICY: If you are unhappy with your purchase because I have mistakenly misrepresented an item or it’s not as I have described. I
Great old rivet squeezer/ dimpler for aviation. Works great. If you need more pictures or info please contact me.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-146b0796bd6-0x115-
Chicago Pneumatic Dual Action C Rivet Squeezer Riveter CP214 Description- Model: CP-214- Type: Dual Action- Manufacturer: Chicago Pneumatic- Yoke Throat to Center: 2-5/8" Yoke Height: 1-1/4" Yoke Thickness: 9/16" The ram is threaded. The anvil is solid(not threaded) Tested and works as it should. Last picture shows all that we have available. You will receive one at random. Made in USA#8087( JK)6/3/2014 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have ... morereceived 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. Powered by
Up for sale here we have a used CP251C Pneumatic Rivet Squeezer by Chicago Pneumatic. Yoke has a 4" reach. Takes standard.187" shank squeezer sets. Tested and working. Put in a few sets and squeezed a few rivets with no problem. Will include an extra yoke and some sets with the tool. Any questions on this tool or any other rivet squeezers. Feel free to ask.
Up for sale here we have a used CP251A Pneumatic Rivet Squeezer by Chicago Pneumatic. Takes standard.187 shank squeezer sets. Tested and working. Put in a few sets and squeezed a few rivets with no problem. Will include block of squeezer sets with tool. Any questions on this tool or any other rivet squeezers. Feel free to ask.
Chicago 2-1/2" Pneumatic C Rivet Squeezer Riveter CP214 Description- Model: CP-214- Manufacturer: Chicago Pneumatic- Throat Depth: 2.5" Yoke Open: 1-1/8" Yoke Closed: 1-1/2" Rivet Capacity(Aluminum) 1/8" Rivet Capacity(Steel) 3/32" Max Force: 3.000lb- Tested and works as it should. Made in USA#3354( JK)6/13/2014 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like ... morewe could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. Powered by
Chicago Pneumatic Rivet Squeezer with Offset Head Great tool from a trusted brand. There is a very small air leak near the handle but we were just squeezing it today and it still worked great. There is plenty of life left in this squeezer. Specifications- Model: CP351- Reach: 3" Open Jaw Height: 2" Aluminum Capacity: 1/8" Steel Capacity: 3/32" Max Force: 3.000lbs- Length: 18" Weight: 17 lbs
APT'C' yolk pneumatic rivet squeezers in excellent condition. Works perfectly and very powerful. Takes standard 3/16 squeezer bits. Part number 7050 Serial number 67032 Check out my other aviation tools for sale.
THIS IS A VERY NICE AMERICAN PNEUMATIC TANDEM C SQUEEZE THIS SQUEEZE WORKS GREAT AND IS AS SEEN THE SQUEEZE HAS GREAT POWER AND TAKES 3/16 SETS THE PLUNGER ADJUSTS IN AND OUT TO FIND THE MOST POWERFUL POSITION FOR THE RIGHT APPLICATION. SHIPPING WILL BE FREE ANYWHERE IN THE USA AND APO'S
Atlantic Air Tool Co. Pneumatic"C" Yoke Squeezer Model 60C with Rivets Includes 5 Plano Containers of All Sizes of Rivets. Thousands of Rivets! Great Deal! MODEL RIVET CAPACITY DIAMETER STANDARD YOKE DIMENSIONS MAX FORCE with 90 PSI(6.21 BAR) AIR PRESSURE PSI(kN) SET HOLDER OVERALL LENGTH WEIGHT with YOKES LBS. kg) ALUM STEEL REACH GAP MAX TRAVEL STROKE at MAX POWER 30C15 1/8(3.17) 3/32(2.36) 1 1/2(38.1) 1 1/4(31.75) 3000(13.35) 9/16(14.27) 1/16(1.57) 10 1/4(260.35) 4 1/2(2.04) 60C15 3/16(4.75) 5/32(3.96) 1 1/2(38.1) 1 1/4(31.75) 6000(26.70) 9/16(14.27) 1/16(1.57) 14(355.6) 5 1/2(2.49) 90C15 1/4(6.35) 3/16(4.75) 1 1/2(38.1) 1 1/4(31.75) 9000(40.05) 9/16(14.27) 1/16(1.57) 18 3/4(476.25) 8 1/2(3.86) DIMENSIONS: INCHES(MM) Thank You and Happy Bidding
Chicago Pneumatic rivet squeezer. Model: CP-0214 This squeeze has been in my toolbox for over twenty years. Because I have several others. This one doesn't get used much. It is strong and opens and closes as it should. It does have a small air leak on the rear of the tool. The jaw has been ground on by me along time ago. It is only nine inches long and accepts standard 3/16" shanked sets. U.S. buyers only. Please look at all pictures closely. The items pictured are the items you will receive. Most of the items that I sell are used aerospace surplus. Some items may have engravings. Paint, sealant, grind marks, etc. If the item does have any defects then I have shown it in the pictures. Visit my other items for more tools. I offer combined shipping discounts. You pay the highest shipping price shown plus $1 for each additional item. ... moreall items must be paid for at the same time) Thank you for your business
Gently used pneumatic C-squeeze with two inch yoke. Very smooth operation. Includes bench stand that. When bolted to edge of bench, will hold squeeze by the yoke, allowing for single hand operation. Someone before me ground off the brand name.unsure why. Will ship to U.S. including APO's etc. or Canada only.
Great rivet squeeze used in the aviation industry a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-147a6442a48-0x10d-
This is a Cleco division. Aircraft compression riveter. Comes with"C" yoke that has a 2" reach. Tool cycles great and takes 1/4" rivet sets. I will include one set pictured in this auction. Please look at all pictures and ask questions before bidding. Tool will be sold as is. Tool will be shipped with"C" Yoke off to keep shipping costs down. Thanks for looking
Chicago Pneumatic rivet squeezer CP-0214. It is in nice cosmetic condition it looks to have been repainted or maybe rebuilt I am not sure. The jaws open to around 1 3/4" and close around 7/8" I think something needs adjusted if possible because when you push the lever with your thumb nothing happens until you push up the little black lever up past the brass stop as shown in a picture. I did not have the rivets need to fully test it but it smashed a 1" board down to about 7/8"
CP squeezer in good condition. The paint is chipped in many places. The body has ID marks. The"blackening/bluing" on the frame shows very little wear. Comes with the. 4pcs- flush" sets shown. Tested on the samples shown; are 3/32" set in 2pcs- 3/32" 1/8" set in 2pcs- 1/4"
Up for auction here are 20(10 cupped and 10 flush) rivet dies for use in standard.187" shank pneumatic rivet squeezers. There is an assortment of lengths and cupping styles. Any other questions. Just ask.
Boston Pneumatic rivet squeezer(BP-7) excellent working condition. weight 13 lb X 18" long
Up for auction we have here is a use Alligator Yoke Pneumatic Rivet Squeezer by US Industrial Tool. Part number US114A. Specs: These silent compression riveters are excellent for many assembly operations- used in aircraft. Automotive, truck,bus components, boats, metal furniture, toys, electronic chassis and appliance assembly. Rivet capacity Alum: 1/8' Rivet capacity Steel: 3/32" Force in lbs. 3.000 Reach: 1 1/2" Max Travel: 9/16" Accepts 3/16" shank squeezer sets. One-man operation increases productivity. Rolling cam and wedge assembly greatly multiplies compression force of piston. Squeeze" action permits easy control. Exceptional accuracy and uniformity. Speed of squeeze riveter can be controlled by throttle. Swivel air inlet aids maneuverability. Develops full squeezing force with only 90 P.S.I. air pressure
Excellent used condition Pneumatic A squeeze. Works great. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14905e3eb8a-0x110-
Gemini Pneumatic Air Operated Hose Clamp Crimper Rivet Squeezer Riveter Tool 327 GEMINI PNEUMATIC HOSE CLAMP CRIMPER RIVETER TOOL! THEY WORK IN REVERSE. THEY OPEN WHEN YOU HIT THE TRIGGER AND CLOSE WHEN YOU RELEASE. GOOD USED WORKING CONDITION! ONE TOOL WORKS AND THE OTHER DOES NOT. THE ONE WITH THE SCREWS IN THE TIPS OF THE JAWS IS NOT WORKING. CAN BE FIXED UP. THEY ARE SIMPLE TOOLS TO FIX! COMES WITH THE FOLLOWING: MODEL NO. 327 THEY BOTH HAVE DIFFERENT SET OF JAWS. THEY ARE BOTH OFFSET AND MEASURES 3" IN LENGTH! THEY HAVE DIFFERENT TIPS ON THEM. ONE MEASURES AROUND 1" IN DIAMETER AND THE OTHER IS AROUND 3/4" CUPPED. THEY BOTH HAVE A CUPPED TIP. THEY HAVE INTERCHANGABLE TIPS ON THE JAWS. HELD IN BY TWO SCREWS! YOU CAN CUSTOMIZE THIS TOOL FOR MANY DIFFERENT JOB APPLICATIONS! USED ALOT IN THE AUTOMOTIVE INDUSTRY. GREAT TOOL ... moreTO HAVE IN YOUR COLLECTION! MAY BE USED AS A HOSE CLAMP CRIMPER OR A RIVET SQUEEZER! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! IF YOU FEEL SHIPPING IS TOO HIGH. JUST EMAIL US AND WE WILL TRY TO GET YOU A BETTER RATE. EBAY'S CALCULATOR DOES NOT ALWAYS SHOW THE BEST RATES! WE WILL GET YOU A PRICE THAT WILL MAKE YOU HAPPY! CHECK OUT OUR STORE FOR MORE GREAT DEALS! WE ARE POSTING NEW ITEMS EVERY WEEK! WE CARRY A LARGE INVENTORY OF ELECTRIC. PNEUMATIC, HYDRAULIC TOOLS& PARTS!
Chicago Pneumatic Alligator Squeezer Riveter CP-0351 ESVEL- Refurbished Specifications- Model: CP-0351 ESVEL- Aluminum Capacity: 3/16" Steel Capacity: 5/32" Yoke Reach: 9-1/8" Yoke Closed Height: 3/4" Max Force: 6.000 lbs. Moving Plunger Max Travel: 1-11/16" Final Part of Stroke at Max Force: 063" Cylinder Type: Tandem- Noise Level: 96 dB(A) Length: 30" Weight: 29 lbs. Description• Remanufactured to near new condition. Comes with a 1 YEAR WARRANTY including parts and labor warranty. If you have any other tooling needing an overhaul. Please contact us for a quote to do so. We can have just about any pneumatic tool rebuilt with a VERY short turnaround. Contact us for any questions#10502( JK)10/15/2014 Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items ... morein our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the in
This is a great deal. You get the Pneumatic"C" Rivet Squeezer with a standard 3" Yoke. I used this squeezer to build my RV-7 Experimental Aircraft shown in the picture above. This will save you a lot of extra work over hand squeezing every rivet. ◾Squeezer develops 3,000 lbs of compressive force and is rated for 1/8" diameter aluminum rivets. ◾Built-in air line swivel included. ◾Uses industry standard.187(3/16" shank squeeze sets/dies. ◾Squeezer body with yoke weighs 6.8 lbs. ◾Yoke is heat treated and features a maintenance free black oxide finish. Industry standard yoke hole pattern- yokes are completely interchangeable with all known brands including Chicago Pneumatic, Atlantic Air Tool, General Pneumatic, US Tool, Avery, Sioux, etc. This is the perfect Rivet Squeezer for any aircraft maintenance shop, sheetmetal ... moretechnician, or home builder.
One Chicago Pneumatic Rivet Squeezer. Model No. CP-0214- COMP. RIV. TOOL This squeezer is made in the USA. Uses.187- 3/16" push in sets and has a safety trigger Tool has been tested and it is in great working order. The action is very quick. Solid and responsive but it is a bit slow to open back up. Rivet Squeezer pictured is the one you will receive. I combine shipping when possible. Thanks for looking. Powered by
US industrial tool model 114C rivet squeezer.Used but functions good.Sold as is.Shipping.Handling with insurance and confirmation to the lower 48 will be fixed at $15.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14951a7178b-0x113-
Used but working Chicago Pneumatic Alligator Rivet Squeezer Model: CP0214 ENGEL(Tandem) Reach = 3" Closed Height = 7/8" Throat Gap = 2 1/8" Total Yoke Gap = 2 1/2"
For sale here are 12 rivet dies for use in standard.187" shank pneumatic rivet squeezers. There are two large(1" dia) round sets and an assortment of regular style sets up to 1-1/4" long. Any questions. Feel free to ask. For these and more products see us at www.jatsupply.com
Chicago Pneumatic CP214 Rivet Squeezer CP-214 Riveter Aircraft Air Tool. Works good.
Chicago Pneumatic CP214. American Pneumatic 720, APT and E.A. Selzer EA7000 Rivet Squeezer CP-214 Riveter Aircraft Air Tool, all have some problems. Not working or missing a small part.
Aircraft river squeeze. Used for 2 months, was oiled and taken very good care of, as i used these tools for my profession 2 day shipping with insurance Thanks for looking
Works good and I'll give you 25 assorted sets
TRS 2-HEAD PNEUMATIC SQUEEZER just pulled from a closing cardboard and paper product manufacturing facility free local pickup freight will range between 125-495 to lower 48 states depending on your distance from 75007