|
Order by:
Available to:
eBay Affiliate Links
|
Buy It Now
$150.00 Shipping Condition: Used Location: China
Buy It Now
$160.00 Shipping Condition: New – Open box Location: Ukraine Attenuator D3-28. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D3-28: Frequency range- 3.94 GHz– 4.64GHz; Initial attenuation- 0.3 dB; D3-28 attenuation measurement range– 0 dB– 60 dB; Accuracy(0.01 + 0.004 A) dB– up to 50 dB, 0.2+ 0.04(A-50) dB- 50dB- 60dB; Maximum acceptable power– 2 Watt; KCBH- 1.15(1.25 with a coaxial- waveguide transition) High frequency path– 48x24mm; Dimensions– 709x295x205mm; Weight- 14kg Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D328. D3 28, D3-28. Д 328, д 3-28. Д3 28. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I
Buy It Now
$20.00 Shipping Condition: Used Location: China
Buy It Now
$20.00 Shipping Condition: New – Open box Location: China Your request will be replied within 12 hours.
Buy It Now
$100.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$30.00 Shipping Condition: Used Location: China ※All faulty due to improper installation or improper use will NOT be covered by the warranty.
Buy It Now
Free Shipping Condition: New Location: China Your request will be replied within 12 hours.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$140.00 Shipping Condition: Used Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$140.00 Shipping Condition: Used Location: China
Buy It Now
$30.00 Shipping Condition: Used Location: China
Buy It Now
$120.00 Shipping Condition: Used Location: China
Buy It Now
Free Shipping Condition: Used Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$20.00 Shipping Condition: Used Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$43.00 Shipping Condition: Used Location: China
Buy It Now
$30.00 Shipping Condition: Used Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$25.00 Shipping Condition: Used Location: 罗湖区, China We take our reputation seriously. Can we get a wholesale price ?.
Buy It Now
$20.00 Shipping Condition: Used Location: China
Buy It Now
Free Shipping Condition: New Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$140.00 Shipping Condition: Used Location: 罗湖区, China We take our reputation seriously.
Buy It Now
Free Shipping Condition: Used Location: China We will do our best and help you provide the solution.
Buy It Now
Free Shipping Condition: New Location: 罗湖区, China Can we get a wholesale price ?. We take our reputation seriously.
Buy It Now
$50.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$120.00 Shipping Condition: New – Open box Location: Ukraine Attenuator D3-33A. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D3-33A: Frequency range- 8.24 GHz– 12.05 GHz; Initial attenuation- 0.5 dB; D3-33A attenuation measurement range- 0dB- 70dB; Maximum acceptable power- 0.5 Watt; KCBH- 1.2( up to 8.8 GHz) 1.15(8.8 GHz– 12.05GHz) High frequency path– 23 x 10 mm; Dimensions– 478x270x210mm; Weight- 6kg. Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D333A. D3 33A, D3-3 3A. Д 333a, д 3-33a. Д3 33a. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I will look through the technical documentation for the device and
Buy It Now
$20.00 Shipping Condition: Used Location: China We send the products randomly. We will do our best and help you provide the solution.
Buy It Now
$120.00 Shipping Condition: Used Location: 罗湖区, China We take our reputation seriously.
Buy It Now
Free Shipping Condition: Used Location: China We will do our best and help you provide the solution.
Buy It Now
$15.00 Shipping Condition: New Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$25.00 Shipping Condition: New – Open box Location: 罗湖区, China We take our reputation seriously. Tariff policy.
Buy It Now
$110.00 Shipping Condition: New – Open box Location: Ukraine Attenuator D3-34A. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D3-34A: Frequency range- 12.05 GHz– 17.44GHz; Accuracy-0.3dB(up to 50) 0.66dB(up to 60) 1.06(up to 70) Initial attenuation- 0.5 dB; D3-33A attenuation measurement range- 0dB- 70dB; Maximum acceptable power- 0.5 Watt; KCBH- 1.2( up to 12.05 GHz) 1.15( 12.3 GHz– 17.44GHz) High frequency path– 17 x 8 mm; Dimensions– 350x270x210mm; Weight- 5kg. Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D334A. D3 34A, D3-3 4A. Д 334a, д 3-34a. Д3 34a. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I
Buy It Now
$110.00 Shipping Condition: New – Open box Location: Ukraine Attenuator D3-35. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D3-35: Frequency range- 17.44-25.86 GHz; Initial attenuation- 0.3 dB; D3-35 attenuation measurement range– 0-70 dB; Maximum acceptable power– 0.3 Watt; KCBH- 1.2; High frequency path– 11.5x5.5mm; Dimensions– 315x270x210 mm; Weight- 5.5 kg Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D335. D3 35, D3-35. Д 335, д 3-35. Д3 35. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I will look through the technical documentation for the device and I will be happy to consult you. Also I may speak directly with
Buy It Now
Free Shipping Condition: Used Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$20.00 Shipping Condition: New Location: 罗湖区, China We take our reputation seriously. Tariff policy.
Buy It Now
$90.00 Shipping Condition: New – Open box Location: Ukraine Attenuator D3-32A. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D3-32A: Frequency range- 6.85 GHz– 9.93 GHz; Initial attenuation- 0.5 dB; D3-32A attenuation measurement range- 0dB- 70dB; Maximum acceptable power- 0.5 Watt; KCBH- 1.2( up to 7.4 GHz) 1.15(7.4 GHz– 9.93GHz) High frequency path– 28.5 x 12.6 mm; Dimensions– 596x270x210mm; Weight- 6kg. Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D332A. D3 32A, D3-3 2A. Д 332a, д 3-32a. Д3 32a. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I will look through the technical documentation for the device an
Buy It Now
$80.00 Shipping Condition: Used Location: China We will do our best and help you provide the solution. ※All faulty due to improper installation or improper use will NOT be covered by the warranty.
Buy It Now
$20.00 Shipping Condition: Used Location: China ※All faulty due to improper installation or improper use will NOT be covered by the warranty. We will do our best and help you provide the solution.
Buy It Now
$50.00 Shipping Condition: Used Location: China Tektronix TCA-292MM TekConnect Adapter Description The high-speed 2.92 mm-type adapter allows a more direct connection to the signal under test requiring ... morea 2.92 mm connection without losing performance by adding other external conversion adapters. The locking screw must be used to ensure full bandwidth performance. The 2.92 mm connector is more robust and performs at higher frequencies than an SMA connector. The 2.92 mm connector is compatible with SMA connectors. But the electrical performance will be limited to the bandwidth of the SMA connector. Features DC to ≥25 GHz(Instrument Dependent) 50 Ω Input(Only) SMA Compatible, Applications: Signal Integrity. Jitter, and Timing Analysis, Verification. Characterization, and Debug of Sophisticated Designs, High-speed Digital Devices and Circuits, Power Supplies/Inverters, Semiconductor Devices, Electronic Ballasts, Industrial/Consumer Electronics, Mobile Communications, Motor Drives, Transportation Systems, Disk Drive Analysis, Investigation of Transient Phenomena, Spectral Analysis, Video Design and Development HDTV and Streaming Digital Video, Specifications Characteristics, Model Specification, TCA- 292MM, Attenuation Accuracy at DC, Refer to host instrument specification, Input Resistance at DC, 50 Ω, Typical, Bandwidth(3 dB) DC to ≥25 GHz(maximum frequency) Limited by host instrument, Propagation Delay(Input-to-Output) RMS Noise, Refer to host instrument specification, VSWR(Return Loss) Refer to host instrument specification, RF Insertion Loss, 0.04×SQRT(F) GHz) adapter only) Rise Time, ≤16 ps(minimum rise time) Limited by host instrument, Maximum Input Voltage(Derated with frequency) Refer to host instrument specification, Nominal, Inputs, 1(2.92 mm 50Ω) Adapter Model Compatibility, Refer to TekConnect amplifier. Adapters, and probes compatibility table, Warranty, 1 year PAYMENT& SHIPPING INFORMATION Payment Buyer must contact us within 3 days of winning the bid. Accepts Paypal. I will not ship the item until payment has been completed o
Buy It Now
Free Shipping Condition: New Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$145.00 Shipping Condition: New – Open box Location: Ukraine Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons. Technical characteristics of device attenuator ... moreD3 -27 Accuracy - (0.01 +0.004 A), dB – up to50 dB, ( 0.2+0.04 (A -50)) dB- 50dB - 60dB;.
Buy It Now
$100.00 Shipping Condition: Used Location: China
Buy It Now
$50.00 Shipping Condition: Used Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$85.00 Shipping Condition: New – Open box Location: Ukraine Attenuator D3-36A. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Attenuators D3- 36A are designed to reduce calibrated high-frequency signal in waveguides. Reference optical system can increase measurement reliability from devices scale. Accuracy attenuation provided by metrological means is guaranteed for all frequency and attenuation ranges. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D3-36A: Attenuators D3- 36A are designed to reduce calibrated high-frequency signal in waveguides. Reference optical system can increase measurement reliability from devices scale. Accuracy attenuation provided by metrological means is guaranteed for all frequency and attenuation ranges. Frequency range. GHz Initial attenuation. DB Measurement attenuation limits. DB Accuracy. DB 25. 86-37. 5 1 0-70 dB 0.41(up to 50) 0.9(up to 60) 1.41(up to 70) Maximum acceptable power. Watt KCBH High frequency- tract. Mm Dimensions. Mm; weight. Kg 0. 3 1. 2 7. 2 x 3. 4 257 x 270 x 210; 5. 5 Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your paym
Buy It Now
$35.00 Shipping Condition: New – Open box Location: Ukraine Attenuator D5-22. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D5-22: Frequency range- 7.15 GHz- 10. 2 GHz; Initial attenuation- 1 dB; D5-20 Attenuation measurement limits- 1 dB- 30 dB; Accuracy- 1.5 dB(up to 15dB) 10% up to 30 dB) Maximum acceptable power- 0.5 Watt; KCBH- 1.08; High frequency tract– 28.5x12.5mm; Dimensions– 158x98x101mm; Weight- 0.95 kg. Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D522. D 522. D-5 22. Д 522, д- 522. Д5 22. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I will look through the technical documentation for the device
Buy It Now
$130.00 Shipping Condition: Used Location: 罗湖区, China We take our reputation seriously.
Buy It Now
$30.00 Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$130.00 Shipping Condition: Used Location: China
Buy It Now
$50.00 Shipping Condition: Used Location: 罗湖区, China Tektronix TCA-292MM TekConnect Adapter Description The high-speed 2.92 mm-type adapter allows a more direct connection to the signal under test requiring ... morea 2.92 mm connection without losing performance by adding other external conversion adapters. The locking screw must be used to ensure full bandwidth performance. The 2.92 mm connector is more robust and performs at higher frequencies than an SMA connector. The 2.92 mm connector is compatible with SMA connectors. But the electrical performance will be limited to the bandwidth of the SMA connector. Features DC to ≥25 GHz(Instrument Dependent) 50 Ω Input(Only) SMA Compatible, Applications: Signal Integrity. Jitter, and Timing Analysis, Verification. Characterization, and Debug of Sophisticated Designs, High-speed Digital Devices and Circuits, Power Supplies/Inverters, Semiconductor Devices, Electronic Ballasts, Industrial/Consumer Electronics, Mobile Communications, Motor Drives, Transportation Systems, Disk Drive Analysis, Investigation of Transient Phenomena, Spectral Analysis, Video Design and Development HDTV and Streaming Digital Video, Specifications Characteristics, Model Specification, TCA- 292MM, Attenuation Accuracy at DC, Refer to host instrument specification, Input Resistance at DC, 50 Ω, Typical, Bandwidth(3 dB) DC to ≥25 GHz(maximum frequency) Limited by host instrument, Propagation Delay(Input-to-Output) RMS Noise, Refer to host instrument specification, VSWR(Return Loss) Refer to host instrument specification, RF Insertion Loss, 0.04×SQRT(F) GHz) adapter only) Rise Time, ≤16 ps(minimum rise time) Limited by host instrument, Maximum Input Voltage(Derated with frequency) Refer to host instrument specification, Nominal, Inputs, 1(2.92 mm 50Ω) Adapter Model Compatibility, Refer to TekConnect amplifier. Adapters, and probes compatibility table, Warranty, 1 year PAYMENT& SHIPPING INFORMATION Payment Buyer must contact us within 3 days of winning the bid. Accepts Paypal. I will not ship the item until payment has been completed o
Buy It Now
$35.00 Shipping Condition: New – Open box Location: Ukraine Attenuator D5-21. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D5-21: Frequency range– 8.3 GHz- 11. 55 GHz; Initial attenuation- 1 dB; D5-20 Attenuation measurement limits- 1 dB- 30 dB; Accuracy- 1.5 dB(up to 15dB) 10% up to 30 dB) Maximum acceptable power- 0.5 Watt; KCBH- 1.08; High frequency tract– 28.5x12.5mm; Dimensions– 158x98x101mm; Weight- 0.93 kg. Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D521. D 521. D-5 21. Д 521, д- 521. Д5 21. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I will look through the technical documentation for the device
Buy It Now
Free Shipping Condition: New Location: China Your request will be replied within 12 hours.
Buy It Now
$80.00 Shipping Condition: Used Location: China
Buy It Now
$30.00 Shipping Condition: New – Open box Location: China
Buy It Now
$20.00 Shipping Condition: New – Open box Location: China
Buy It Now
$35.00 Shipping Condition: New – Open box Location: Ukraine Attenuator D5-20. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D5-20: Frequency range- 11.55 GHz- 17. 15 GHz; Initial attenuation- 1 dB; D5-20 Attenuation measurement limits- 1 dB- 30 dB; Accuracy- 1.5 dB(up to 15dB) 10% up to 30 dB) Maximum acceptable power- 0.5 Watt; KCBH- 1.08; High frequency tract– 17x8mm; Dimensions– 158x98x101mm; Weight- 0.78 kg. Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D520. D 520. D-5 20. Д 520, д- 520. Д5 20. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I will look through the technical documentation for the device and
Buy It Now
$30.00 Shipping Condition: New – Open box Location: 罗湖区, China We take our reputation seriously.
Buy It Now
Free Shipping Condition: New Location: China Your request will be replied within 12 hours.
Buy It Now
$105.00 Shipping Condition: New – Open box Location: Ukraine Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons. Primary current nominal value 0.5 A, 1A, 2.5 ... moreA, 5A, 10A, 25A, 50A. Secondary load nominal value, V·A and power coefficient.
Buy It Now
$30.00 Shipping Condition: Used Location: China
Buy It Now
$20.00 Shipping Condition: New – Open box Location: China
Buy It Now
$100.00 Shipping Condition: Used Location: 罗湖区, China Tariff policy.
Buy It Now
$80.00 Shipping Condition: Used Location: 罗湖区, China We take our reputation seriously.
|
|
|