|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: Used Location: Emmett, United States After we receive the item back at our facility, we will confirm that the item is indeed ours and defective. After we make our confirmations then we will ... morereplace the defective item with an equivalent item.
Buy It Now
Condition: Used Location: Kawkawlin, United States Morse 25GGDV, 200:1 Gear Reducer. Attached US Motor #F591. Motor has been powered up. Item is missing 2 plugs. Will need to be checked for proper fluid ... morelevel. NO VERBAL CONFIRMATION WILL BE GIVEN, THIS MUST BE IN WRITING.
Buy It Now
Free Shipping Condition: Used Location: Emmett, United States After we receive the item back at our facility, we will confirm that the item is indeed ours and defective. After we make our confirmations then we will ... morereplace the defective item with an equivalent item.
Buy It Now
Free Shipping Condition: New Location: China CW Decoder Morse Code Reader Morse code Translator Ham Radio Accessory Essential Module Include LCD1602 DC5V -12V/500mA. LCD1602 display, large screen ... moredisplay. The decoder works well as a practice Morse code and checks your own decoding ability when listening to CW input sources.
Buy It Now
$25.00 Shipping Condition: New Location: Beaver, United States
Buy It Now
Free Shipping Condition: New Location: Wellington, United States Bore Gage setting Rings ( 10mm - over 300mm 1/4" - 13"). Tool holders (CAT50, CAT40, BT50, BT45, BT40, HSK, VDI, Morse Taper) . Height Stands, All types ... moreof Gages . Gear Hobs, Lathe Chucks.
Buy It Now
Free Shipping Condition: New Location: Wellington, United States Price is for 5pc as shown. Height Stands, All types of Gages . Bore Gage setting Rings ( 10mm - over 300mm 1/4" - 13"). Tool holders (CAT50, CAT40, BT50, ... moreBT45, BT40, HSK, VDI, Morse Taper) . Gear Hobs, Lathe Chucks.
Buy It Now
$16.50 Shipping Condition: Used Location: Wellington, United States Height Stands, All types of Gages . Bore Gage setting Rings ( 10mm - over 300mm 1/4" - 13"). Tool holders (CAT50, CAT40, BT50, BT45, BT40, HSK, VDI, Morse ... moreTaper) . Gear Hobs, Lathe Chucks.
Buy It Now
Free Shipping Condition: New Location: Wellington, United States EMT, IMC, Flexible, Rigid. 3/4" Pipe OD. NEW T&B (10). Bore Gage setting Rings ( 10mm - over 300mm 1/4" - 13").
Buy It Now
Free Shipping Condition: New Location: Wellington, United States Strong, durable, and UV and corrosion resistant, this liquid-tight fitting creates a positive bond between the conduit and a box or enclosure. The zinc ... morechromate plating extends fitting life and enhances its appearance.
Buy It Now
$12.50 Shipping Condition: Used Location: Wellington, United States Height Stands, All types of Gages . Bore Gage setting Rings ( 10mm - over 300mm 1/4" - 13"). Tool holders (CAT50, CAT40, BT50, BT45, BT40, HSK, VDI, Morse ... moreTaper) . Gear Hobs, Lathe Chucks.
Buy It Now
Free Shipping Condition: New Location: China Module with ceramic edge antenna, strong signal. Antenna size 25x25mm. Module size 25mmx35mm. There are LED signal indicators. 3100 RPM High Torque Micro ... moreBrushless Motor For mini MUSCLE Massage Gun 6V-12V.
Buy It Now
$2.19 Shipping Condition: New Location: China We designed a 4-channel MOSFET switch. MOSFET is an electronic devices with good switching characteristics. Relay is another kind of module with switching ... morecharacteristics. DC 5V-10V PCM5102 DAC Decoder I2S Player Assembled Board For Arduino 2.1V RMS.
Buy It Now
Free Shipping Condition: New Location: China Lastest ESP32 Version: REV1. Transmit current: 120mA@+20dBm. Transmit power: +20dBm. 3D Antenna. LORA antenna connector is RG316. Destined module with ... moreceramic antenna, signal super. There are LED signal indicator.
Buy It Now
$2.29 Shipping Condition: New Location: China It is very suitable for Raspberry Pi. Easy to assemble. Observe GPIO status. Legible miniscule printing of the labels of each of the GPIO pin's function. ... moreDoes not occupy other space, very convenient when doing DIY circuits.
Buy It Now
$2.19 Shipping Condition: New Location: China (Output=input): DC6~70V. Uses: As the input end of various DC power supplies, as well as the air cooling heat dissipation of power supplies. Power battery ... moreinterface. PD interface. ProtectiveCover Doorbell Silicone Protective Cover For Google Nest hellodoorbell.
Buy It Now
Free Shipping Condition: New Location: Wellington, United States Price is for 5pc as shown. Height Stands, All types of Gages . Bore Gage setting Rings ( 10mm - over 300mm 1/4" - 13"). Tool holders (CAT50, CAT40, BT50, ... moreBT45, BT40, HSK, VDI, Morse Taper) . Gear Hobs, Lathe Chucks.
|
|
|
|
MORSE GEAR BOX
FOR SALE A GEAR BOX. WEIGHTS 11POUNDS. 3/4" DIA SHAFTS. IF YOU HAVE ANY QUESTIONS PLEASE ASK. PLEASE PAY WITHIN 5 DAYS AFTER AUCTION ENDS. PAYPAL OR YOUR OPTION. THANKS FOR LOOKING. Check out my!
|
|
|
MORSE 3750180LR20 GEAR REDUCER 20:1 RATIO 5.23HP@ 1750RPM USED
USED APPROX SHIP WEIGHT:128LBS INTERNATIONAL BUYERS-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COST WILL BE PRIOR TO BIDDING or BUYING. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. PLEASE CONTACT US FOR OTHER SHIPPING QUOTES. KS Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Emerson Power Transmission Corp. Morse Gear Box Model: 192699
Emerson Power Transmisson Corp. Morse gear box I do not know the exact gear ratio. But for approx. every 2.8 turnsof the shaft hole, the U joint adapter turns 1 revolution. Unit is in good condition. Will work no problems. I have one more I will be listing soon. THANKS for LOOKING! And Ya'll come back Ya Hear? Unless stated otherwise above. Item comes with a 10 Day Guarantee against Defect Only, Or if description has wrong information or is Grossly misrepresented. Guarantee does Not Include the following: Misuse in customer handling or installation. Lightning damage, or customer making a mistake in what they bought. I reserve the right to inspect equipment/ item(s) Prior to refund. Buyer will be reimbursed for total amount of item. Plus shipping, and any shipping cost incurred if item is sent back. I expect item to be sent back packed ... morein At least as good condition as arrived. And must include insurance and delivery confirmation/Tracking. item must be returned within 10 days of arrival. Serial numbers are kept on file. And tamper proof stickers applied. Item will be Well packed. And insured with delivery confirmation. Any sensitive electronic items will be wrapped in Anti-Static bags. If item does not include out of U.S. bidders. Then International bidders should ask Before bidding. Alaska.Hawaii, and Puerto Rico may be higher shipping cost, so Please inquire Before buying. If more information is need Please contact us. If no answer. Leave name,number and Ebay item you are inquiring about, and an E.C.S. Rep. will return your call. 865)206-2052. 865)446-2112. All Auctions sold as-is. As per the description above, with No Guarantees or Warranties implied unless otherwise stated or if I list wrong information, so ASK before buying.
|
|
|
EMERSON MORSE 15:1 RATIO GEAR BOX #FI32 15 184TC L - USED
USED. FI32 15 184TC L. 15:1 RATIO. INPUT HP 4.71. OUTPUT TORQUE(IN-LB) 2273. INPUT SHAFT 1" x 1" OUTPUT SHAFT 3 1/2" x 1 1/2" SEE PICS. APPROX. SHIP WEIGHT: 96 LBS. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO THE SHIPPING PRICE. THESE FEES WILL VARY ACCORDING TO PALLET SIZE. PLEASE CONTACT SELLER FOR PALLET PRICE& SHIP QUOTE. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES, OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL CHARGES WILL BE PRIOR TO BIDDING OR BUYING. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. CL Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f14e648b8-0x103-
|
|
|
MORSE ED SERIES 25GED GEAR REDUCER RATIO 30:1 W/ ½ HP MOTOR
MORSE GEAR REDUCER WITH MOTOR. USED Search MORSE GEAR REDUCER WITH MOTOR. USED Gear Reducer: Manufacturer: Morse Series: ED Part number: 25GED Ratio: 30:1 Motor: Manufacturer: Delco Model number: 2J7624C2 Frame: 56C ½ Hp 1745 RPM 208-230/440 VAC | 230/460 VAC 2-2/1 | 2.1/1.05 Amp Please see the attached PDF for additional information. Thank you. Guaranteed not D.O.A. CCE158. NT 80 lbs 060613 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there ... moreis a significant increase in shipping your order will be held and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the
|
|
|
MORSE BORG WARNER GEAR REDUCER 30RW, RATIO 40, 1.82 HP, 1750RPM, J-79MM0007
MORSE BORG WARNER GEAR REDUCER MODEL 30RW RATIO 40 SERIAL J-79MM0007 1.82 HP 1750 RPM APPROX 1 3/8" OUTPUT SHAFT DIAMETER APPROX 1" INPUT SHAFT DIAMETER TESTED AND WORKS*PLEASE VIEW PICTURES CAREFULLY- SOLD AS IS* OLD STOCK* PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please note this item is"AS IS" with NO WARRANTY OR GUARANTEE STATED NOR IMPLIED. Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING. All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charge to shipping. Approximate weight: 71 lbs. PLEASE ... moreCONTACT US FOR A FREIGHT QUOTE. Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities RAB/ 811/ SKID#291/ 1) BN
|
|
|
MORSE GEAR REDUCER 50W- 60-1
MORSE GEAR REDUCER 50W- 60-1 $2800.00 SALE(AS IS) NON-REFUNDABLE FREIGHT COLLECT WE CAN LOAD MERCHANDISE AT NO CHARGE WITH CARRIER OF YOUR CHOICE
|
|
|
Morse Emerson ED Series Gear Reducer
New Page 5 New Page 3 Untitled Document Morse Emerson ED Series Gear Reducer Click image to enlarge. Specifications: Manufacturer: Morse-Emerson Manufacturer p/n: 18GEDFC MECI p/n: 700-3214 Condition: used Applications: Chemical. Petroleum, Wastewater Treatment, Mining, Food and Beverage, Pharmaceuticals, Textiles Shaft Inlet Diameter: Two are 1" and one is 5/8" Ratio: 30, Dimensions: Height: 7" Width: 6" Length: 7" Weight: 13 lbs, Retails for over $720 This is seen here at a fraction of the original cost. Deals like this won't last long- Hurry and bid now before it's too late! Welcome to our eBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. After winning an item in auction or completing a Buy It Now purchase, you have two check-out options: ... moreCheck-Out Now! Click the at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after confirming your eBay purchase. Check-Out Later If you do not choose to Check-Out now. You will be notified by eBay via e-mail that you are the winning bidder. You may also continue purchasing additional items from our auctions or eBay store. You have 3 days from the end of the first purchase to add additional items to your order. All of your purchases will be consolidated into one checkout with one payment! Payment We accept the following forms of payment: PayPal- We will ship to the address provided on your PayPal payment only. Credit Cards(Visa. MasterCard, American Express& Discover) Please call MECI to make your Credit Card Payment 800-422-3525 ext. 5 830am to 500pm EST Mon-Fri SALES TAX- For shipments to Ohio. We are required by State law to collect 7% Sales Tax. Shipping Cost and Policy USA USPS Priority Mail or UPS services are used. INTERNATIONAL Shipped USPS International Priority Mail. We will not mark as a gift in any circumstance. Shipping cost does not include import taxes. Duties or brokerag
|
|
|
Morse Gear Box Reducer Ratio 291.33 HP .129 RPM 1750
You are looking at a Morse Gear Box Reducer. This box is used but still in good working condition. It has a 1/2" shaft with a flat for the drive. Comes with a Lovejoy Coupling L-075.500. The reduced side is a 3/4" keyed shaft and comes with a Martin Sprocket#50BS15 3/4. The name tag reads Serial No. A90HD5039 Ratio 291.33 HP.129 RPM 1750. The mounting base measures 6-1/2" by 4-3/4" And has 4 3/8" holes. Look pictures over carefully and e-mail any questions you may have. This box came from a retired farm estate. Payment for an item is due within 7 days of the close of the auction or purchase date. Please wait for an invoice for the total amount due. We will combine purchases and that affects the shipping amount. Also. We can save the buyer some shipping cost because we are only guessing at a weight, but once the item ... moreends, we package it and figure shipping. It does not always come out the same as what we quote in our listing and we want to be fair to the buyer. We look for items that we feel the customer is looking for and we try to deal in older. Collectibles or antiques, but sometimes we will sell new or everyday, usable items. We list our items at an amount that we feel comfortable with and that we feel is a fair market value. We do not pad our shipping charges and we would hope that the bidder takes this into account. Since most of our items have been previously used, we try to describe them as accurately as we can. We have a vast inventory of items for sale but cannot possibly list them all. So if you are looking for something special. Please email us. We may have it. If you have a problem with something you have purchased, please contact us immediately so we can try to solve the problem in an amicable way.
|
|
|
MORSE FI13 30 56C GEAR REDUCER 0.28HP 30 TO 1 RATIO
YOU ARE BUYING ONE MORSE FI13 30 56C GEAR REDUCER 0.28HP 30 TO 1 RATIO. THIS IS USED SURPLUS REMOVED FROM A SHUT DOWN FACILITY AND IS GUARANTEED WORKING. IF YOU HAVE ANY QUESTIONS PLEASE CALL(480)200-0156 OR HIT ASK THE SELLER A QUESTION. MWUPWSD) CF) ESTIMATED RETAIL PRICE: $424.24 International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my!Be sure to add me to your! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1404b73429a-0xfc-
|
|
|
MORSE 4M 1-LR 3/4 IN 3/4 IN 7.22HP 1:1 BEVEL GEAR REDUCER D265269
Brand: MORSE Condition: Refurbished Model: 4M 1-LR Input Diameter: 3/4 IN Output Diameter: 3/4 IN HP: 7.22 HP Ratio: 1:1 Weight: 12.10 lbs Dimensions: 10.50 X 9.50 X 6.50 SKU: D265269 Category: Power Transmission· Gear Reducers Additional Notes: BEVEL
|
|
|
Morse C-Face Quilled Input Left Hand 10:1 Gear Reducer 206Q140L10
ebay template eBay Listing Morse C-Face Quilled Input Left Hand 10:1 Gear Reducer 206Q140L10. Morse C-Face Quilled Input Left Hand 10:1 Gear Reducer 206Q140L10, We will not remove items from eBay to sell directly. Free shipping service is only available in the Lower 48 States and only on qualified items. Condition Acronym Description NIB- New In Box NNB- New No Box USG- Used Surplus Guaranteed MRG- MFG. Refurbished Guaranteed NOS- New Old Stock PNW- Parts Not Working Manufacturer: EPT Morse Item Title: C-Face Quilled Input Left Hand Reducer Model Number: 206Q140L10 Specifications: Input(Shaft or Bore) Size: 7/8 in· Output(Shaft or Bore) Size: 1 in· Ratio: 10:1· Input Configuration: C-Face Quilled· Output Configuration: Left Output· Center Distance: 2 1/16 in· Frame Size: 140TC· Output RPM: 175 rpm@1750 rpm· ... moreInput HP: 1.54 hp@1150 rpm/1.92 hp@1750 rpm· Thermal Input Horsepower: 1.430 hp@1150 rpm/1.740 hp@1750 rpm· Thermal Output Torque: 568.000 in lb@1750 rpm/693.000 in lb@1150 rpm· Output Torque: 636.000 in lb@1750 rpm/746.000 in lb@1150 rpm· Max. Overhung Load: 1078.000 lbf@1750 rpm· Max. Thrust Load: 1580.000 lbf@1750 rpm 1740.000 lbf@1150 rpm· Box Height: 6.38 in· Box Length: 5 1/2 in· Box Width: 3 3/4 in· Washdown Duty: No List Price: $493.51 Condition: Used- In Good Condition Quantity: 1 Guaranteed No DOA Please use the shipping calculator tab at the top of the page to determine your shipping costs. Please review the"Shipping and Payments" tab above the auction before purchasing. Some notes on Shipping: Free Shipping is for domestic orders only and will be shipped via FedEx SmartPost. FedEx Ground, FedEx Home Delivery, USPS Parcel Post, USPS Priority Mail or USPS First Class Mail depending on the weight and destination. Excluding Puerto Rico, Alaska, Hawaii, and Siapan MP Islands. Items weighing over 120lbs will be palletized and shipped via freight carrier. We get very good rates on freight shipments. Please use t
|
|
|
MORSE GEAR REDUCER 375Q180LR15-1 SURPLUS
MORSE GEAR REDUCER 375Q180LR15-1 SURPLUS $1250.00 SALE(AS IS) NON-REFUNDABLE FREIGHT COLLECT. WE CAN LOAD MERCHANDISE AT NO CHARGE WITH CARRIER OF YOUR CHOICE.
|
|
|
Morse Borge Warner Transmission style 24.92 to 1 gear reducer model 115D25
Morse Borge Warner gear reducer model 115D25 5.72HP@ 2118 RPM max oil capacity 1.5 pints
|
|
|
MORSE GEAR REDUCER H96MY5016 USED
MORSE GEAR REDUCER MN: H96MY5016 RATIO: 1 TO 1 HP: 53.53 DPM: 1750 SEE PICS FOR INFO WEIGHT: 90 LBS USED Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Morse Gear reduction Box Speed Reducer 41:1 Eberhardt Denver Borg Warner
Morse Speed reducer great condition. Turns smooth no play at all. Maked Ratio 41 which I assume is 41:1 HP 1.32 RPM 43 Has two 3/4" keyed input shaftsand two 1-1/4" keyed output shafts. one with a sprocket as seen in photo.
|
|
|
MORSE GEAR BOX 30GCT 1.81 HP 1750RPM 30 RATIO
MORSE GEAR BOX 30GCT RATIO- 30 HP- 1.81 RPM-1750 USED- IN GOOD CONDITION REMOVED FROM WORKING ENVIRONMENT
|
|
|
MORSE Gear Reduction Box 18ED Series 50:1 ratio
In perfect working order. This 50 to 1 Morse gear reduction box with 5/8 keyed shaft input and 3/4 keyed shaft output was bought for a wood lathe project that was never started. The original belt pulley and other drive coupler are secured with allen screws, so they can be removed if you have something else you want to use for driving. This box also comes with a pre-drilled mounting base plate attached. Will be shipped Fedex ground with tracking and insurance. International bidders please keep in mind this item weighs about 15 pounds and any import fees are your responsibility. Please ask all questions before placing bids and have fun Ebaying!
|
|
|
Morse 2 HP Cap. Worm Gear Reducer 5:1 Ratio, # 18GSF 56C 100, Used, WARRANTY
Title: Moldavsky 40:1 Ratio Gearbox Description: Our Internal Stock# 3-E6-7(02-17-14 RN) You are about to purchase the following item: Catalog# 18GSF 56C 100 Serial# H97MJ0310 Ratio- 5 HP- 2.17 1750 RPM Made in USA This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible ... morefor ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same
|
|
|
MORSE EMERSON REDUCTION GEAR SI1515
MORSE EMERSON REDUCTION GEAR USED IN ORIGINAL BOX OUR PRICE: $190.00 UNIT SHOWS VERY LITTLE WEAR. MODEL: INVADER SI1515 It is very important that the seller provide us with accurate shipping info. On freight shipments. We must know if we will be shipping to a business, the business name, address, contact info. Local Pick up is always free We want our customers to be completely satisfied with their purchase. If anything about your transaction is not to your satisfaction. Please contact us BEFORE leaving feedback. We will do our best to resolve the problem to your satisfaction. Good communication ensures a successful transaction. We want to provide you with a positive trading experience on eBay. SHIPPING IS ACTUAL COST VIA UPS OR WILL CALL ITEM 95 SHELF F
|
|
|
EATON M3-403507-9023 MORSE 1-1/2HP 575V-AC 1750RPM 3PH BRAKE GEAR MOTOR B347650
Product Specifications. Brand: Eaton, Condition: Used, Model: M3-403507-9023, Model Line: DYNAMATIC, Type: Gear, Power: 1-1/2 HP, Voltage: 575 V-AC, RPM: 1750 RPM, Phase: 3 PH, Shipping Weight: 225 lbs, Shipping Dimensions: 32 x 18 x 15 in, SKU: B347650(CTO) Category: Electrical· Electric Motors, Additional Notes: WITH BRAKE/CLUTCH MORSE REDUCER BRAKE, Product Photos. $1000 USD- We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship items within 1 Business Day of receiving cleared payments. We can ship through express or overnight ... moreUPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. We only offer Collect Shipping via UPS. If the item is to be shipped via Freight. Please contact us for a shipping quote. You may also choose to have your shipment picked up by your carrier. We will palletize, strap and shrink-wrap your shipment. We offer a 7 day courtesy holding period for our clients, but shipments are subject to storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence as we put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer an amazing buying experience to all our customers. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to p
|
|
|
Morse 35 SA 200 A96MN0920 60:1 1.67HP 1750RPM Gear Box
07 3006 0928 T131 This item is surplus stock in good condition. 2" bore Shaft 2-5/8"L X 1"OD Please email any questions or requests for additional pictures before purchasing. International buyers– please note: import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such practices.
|
|
|
MORSE Motor Gear Reducer 12K
MORSE Motor Gear Reducer 12K Up for auction is a Morse motor. It has wear and tear from previous use. It is fully functional and it is ready for every day use. NO INTERNATIONAL SHIPPING. WE ONLY SHIP TO U.S. ADDRESSES! RETURNS ACCEPTED ON ITEMS. THAT ARE DEFECTIVE OR DESCRIBED INCORRECTLY! FEEL FREE TO MESSAGE ME IF YOU HAVE ANY QUESTIONS MON-FRI! PLEASE REVIEW PICTURES FOR MORE ON PHYSICAL CONDITION AND INCLUDED ACCESSORIES. 03/10/2014. OS) O2) G.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144d25d702e-0x102-
|
|
|
MORSE COBRA 10:1 RATIO GEAR TORQUE 5/8" BORE MODEL C13Q56H10
THIS IS A MORSE COBRA TORQUE IN 214LBS. HP@1750. RATIO 10 DESC# C13Q56H10. I.D# MA2010-NO1K
|
|
|
MORSE 75:1 RATIO 9.8HP GEAR REDUCER 70DYX
Concepts Industrial MORSE 75:1 RATIO 9.8HP GEAR REDUCER 70DYX. GUARANTEED NOT DOA. THIS ITEM WILL SHIP FREIGHT ONLY. 860lbs) PLEASE WAIT TO BE INVOICED FOR SHIPPING COST. BUYER PAYS ALL SHIPPING COSTS) Due to our large volume of freight we NO LONGER allow customers to arrange their shipments unless approved prior to end of auction. Please contact Linda at 812-623-6100 for approval. Thank you. CE573. SW/860 RB 4/4/14. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule. Please contact us before bidding/purchasing ... morethe item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. Customer Service Available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours! On Apr-04-14 at 13:14:25 PDT. Seller added the following information:
|
|
|
Morse 175Q56R15 Raider Plus Gear Reducer Ratio 15
CONDITION: Used. No box. Removed from a functioning system; may show signs of use or shelf ware. Please view pictures closely. We do not use stock photos. What you see in the photos is what the buyer will receive. Manufacturer: Morse Type: Raider Plus Gear Reducer Model# 175Q56R15 Ratio: 15 HP@ 1750 RPM: 1.14 Output Torque: 531 Customer Service We deal primarily in new and used industrial equipment and electronic controls; however. We also buy and sell many other types of products. We do not always identify all specifications within the product descriptions. To ensure accuracy of what you are purchasing we do not use stock photos and we include close ups of the label whenever possible. Please do not hesitate to contact us if you have any questions or if you need additional photos PRIOR to purchasing an item. We can be reached at goldenservices3@yahoo.com ... moreor you can contact customer service at(740) 506-4630. We are open 8:00 AM to 5:00 PM Eastern Standard Time. We will do our best to answer your questions. However, if your question is of a technical nature or if you are wondering if the item listed will work with equipment you already own, please contact the manufacturer. They will be able to give you the most complete information about the item in question. Our store policies including the terms of sale. Shipping and returns are located at the top of the home page of our store http:stores.ebay.com/golden-services-3. We try to maintain a high feedback score and we are always willing to work with you on any problem. Please contact us before you resort to leaving negative feedback. Thank you for shopping with Golden Services 3! Powered by
|
|
|
MORSE RAIDER 237Q140H20 GEAR REDUCER, 20:1 RATIO, 7/8" & 1-7/16" BORE SIZ
Inventory Number: 03141480305 Manufacturer: Description: MORSE RAIDER 237Q140H20 GEAR REDUCER. 20:1 RATIO, 7/8" 1-7/16" BORE SIZ Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1 BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT ... moreoffer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice& prepaid with paypal. Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partia
|
|
|
MORSE GEAR SA 1/2 241.74" ID, 3.7" OD
MFG: Morse Category: Drive Parts Part/Model# GEAR SA 1/2 241.74" ID. 3.7" OD Description: 1-MORSE GEAR SA 1/2 241.74" ID. 3.7" OD USED SS43 11313 C-5-1-3-B 5# Payment Policy Payment through PayPal or Call 877-859-3015 for Credit Card approval. Return Policy Returns accepted within 14 days. Items sold as is cannot be returned. Unless description is in error. Buyer pays return freight. Shipping Policy NORTH AMERICAN BUYERS ONLY
|
|
|
Morse Emerson Gear Drive Speed Reducer 20:1 1.25" Shaft 25GED 1HP TEFC DC Motor
Morse Emerson Gear Drive Speed Reducer 20:1 1.25" Shaft 25GED w/DC Motor 1HP THIS ITEM IS USED AND APPEARS TO BE IN FAIR CONDITION. THERE IS SOME COSMETIC WEAR AND IS GUARANTEED TO NOT BE DOA. THE SHAFT IS SEIZED. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 25GED APPROX. PRODUCT DIMENSIONS: LENGTH: 28" WIDTH: 14" HEIGHT: 11" SHIPPING WEIGHT: 90 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE ... moreWEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WAR
|
|
|
Morse Gear Reducer 1.1 Ratio, # 6M 1-0, Used, WARRANTY
Title: Morse 1:1 Ratio Reducer Description: Our Internal Stock# H25-22(6/17/14 JV) You are about to purchase the following item: Catalog# 6M 1-0 Serial# C93MX0012 Ratio- 1.1 HP- 22.03 1750 RPM Made in USA This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping ... morefees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day paymen
|
|
|
MORSE XD3014 175Q56R302 G08K WASHDOWN GEAR BOX, RATIO 30:1 (USED)
SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, AND READ THE IMPORTANT INFORMATION ABOUT DESCRIPTION(BELOW) PLEASE CHECK OUT OUR SALE ITEMS IN OUR STORE! MORSE WASHDOWN GEAR BOX XD3014 175Q56R30W G08K RATIO: 30:1 SHAFT: 1-1/2" X 7/8" USED APPROXIMATE SHIPPING WEIGHT 30 LBS JP/JH IF YOU HAVE ANY QUESTIONS PLEASE CALL US AT 731-635-3167 Please understand that our items are surplus. They come here from factories that have been closed or from other similar situations. Therefore. We do not have first hand knowledge of their history. We do not have the equipment to test many of these items, therefore, we do not know if they are in perfect working condition. We try to be as accurate as possible with our listings. But we are not experts and many of our items are things we know nothing about. There is no eBay condition description ... morefor surplus items, so please do not rely solely on the standardized condition description from eBay. We use our best judgment on the condition, and include lots of pictures. Please look closely at the pictures. And contact us with any questions or to ask for more detailed pictures if needed before making your decision to purchase. We have no desire to misrepresent. We do honor our 7 day return policy. If you should get an item that does not work. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WE APPRECIATE YOUR BUSINESS. AND WISH TO MEET YOUR NEEDS. ALL PAYMENTS ARE TO BE MADE WITHIN 5 DAYS. IF YOU PURCHASED AN ITEM THAT REQUIRES FREIGHT SHIPPING. SHIPPING ARRANGEMENTS ARE TO ALSO BE MADE WITHIN 5 DAYS. COMBINED SHIPPING IS ALWAYS AVAILABLE. AND THANK YOU FOR SHOPPING WITH US! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Morse 10:1 Speed Reducer Gear Box 1750 RPM 1.54 HP
We have a Morse 10:1 Gear Reducer in good working. It includes the wheels and key ways. Please look at the pictures for close ups. It has a 1.54 hp, 1750 R.P.M. Welcome to our auctions. Here we try to provide the best description and products for you to purchase. Please read our policies before placing your bid. Our Electric tools and electronics our tested here in our store as long as we have the cords to test them. Before listing them on ebay. Bidding: We ask if you have less than a 5 for your feedback rating to contact us before placing a bid on an item. We reserve the right to cancel any bidder with 5 or less feedback. If you have any questions about the item in this auction. Please ask before placing a bid. Payment: We accept Paypal. Payment must be received 4 days after the end of the auction. If payment isn’t received a non payment ... morealert will be sent to Ebay. If for any reason you can’t make payment in that time period email and let us know. Shipping: We use USPS and UPS. After payment is received the item will be shipped. Depending on the volume of items going out. It could take up to 3 days before your item gets shipped. But we do our best to get item shipped as soon as possible. Local pick-up is ok. Insurance is included. Because of problems in the past, all item are insured. Handling: Our handling charge covers our supplies and fuel costs to ship. Michigan Sales Tax 6% Applies to Michigan buyers only. We do not ship any electrical tools or electronics Internationally. Returns: We do not accept returns. Warranties: We offer no warranties on any of our item. These items are sold as is. So please, again read the description. We take no responsibility for injuries caused by any item we sell.
|
|
|
Morse Raider Plus 175Q56R20 gear reducer
Morse Raider Plus 175Q56R20 gear reducer SKU:parts1427fb026-1540-fs-host2 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Good used Morse ED Series Gear Reduction Box 20GEDC 40:1 Input 5/8" Output 1"
LOWER 48 US BIDDERS ONLY BECAUSE OF WEIGHT. NO INTERNATIONAL OR USPS SHIPPING-SORRY. We have several different good gear reduction boxes listed so check out all of our listings. You are bidding on this Morse ED Series 40:1 ratio with 5/8" input and 1' output shafts as pictured. Unit turn smoothly and there is no gear slop. Model# is 20GEDC. We do not ship UPS or USPS for Lower 48 US-only Fedex Ground. So if we have listed this with Ebay’s Shipping Calculator please note that it will Fedex Ground. Welcome to Warenhandler’s sales. Please read all of our policies before bidding. Policies: ~ please read all before bidding. All items are used and sold strictly AS IS with no warranties expressed or implied unless stated in description. There are no returns unless we send you the wrong item or have put a warranty on it. We are not the original ... moreowners of items so have little knowledge of previous history. We have only run very basic testing.If any at all, so refer to description for details of what we have checked. We are not experts concerning anything we sell. But will gladly try to run further tests with your expert instructions if possible. Please know what you are bidding on. Look over pictures. And ask questions. Most items are for sale at our warehouse so we reserve the right to cancel auctions at anytime to sell locally. We will not cancel once a bid has been placed though. Payment: Payment is expected within 4 days of invoice unless you are doing local pick-up or discuss with us otherwise. We accept Paypal. Or Cash(if you are doing local pickup)or other forms of payment in the certain categories that ebay will allow them. Sorry but Ebay rules do not allow us to list alternative payment methods for all categories. Communication: We try to answer all emails and send invoices within 24 hours. If you do not receive a reply-check your spam filter first and then email us again if needed. Tracking numbers for Fedex or international shipments will be posted in your MY EBAY. Because we ship directly from the co
|
|
|
RX-38, MORSE RAIDER 175Q56R30 GEAR REDUCER. 30 RATIO. 0.63 HP. 542 LB-IN TORQUE.
MORSE RAIDER 175Q56R30 GEAR REDUCER. Specifications Brand: MORSE, Condition: USED. AS-IS" Model: 175Q56R30, Serial: XD1107 L05K, Type: RAIDER, Power Rating: 30 RATIO. 0.63 HP@ 1750 RPM, 542 LB-IN OUTPUT TORUQE, Weight: 22 LBS. Category: MOTORS/ GEAR DRIVES, ERC# RX-38, Location: Y-9 MIDDLE, Additional Notes: SHAFT SIZE: 2-1/6" LONG AND 7/8" WIDE, Payment. Shipping. All items are shipped out United Parcel Service(UPS) Price is based upon weight and location. We can ship to a PO Box. With US Postal Rates applying. To determine shipping charges there is a UPS Ground Shipping Calculator attached to our auctions. ERC can ship UPS to Canada and any other International location with the buyer being responsible for all customs and International fees applying. Items over UPS weight and size restrictions will be sent via common carrier. ... moreThe customer is responsible for the freight charge. Unloading of the freight and/or picking up freight at terminal if possible. ERC will work with customer in trying to find the most cost effective way of shipping. ERC does not setup shipping via common carrier Internationally. However, we will load your item via common carrier international with you, as a buyer, setting up shipping. The buyer is responsible for any damages to the item once the item leaves our warehouse. All of our items are packaged in new boxes and are prepared for any conditions the shipping company offers. If you would like a special request for our packaging department. Please let us know so we can fulfill your request. If you need a shipping quote. Please send us a message asking for a shipping quote with the item it pertains to. We will need your destination zip code. If you would like to setup your own shipping or receive your own quote, our zip code is 44094. Customer Service. We pride ourselves on being a leader in customer service. For a better understanding of the product. Please use pictures for best assurance of your buy. We are not responsible for technical specifications or fitment of an item.
|
|
|
morse gear reducer 15:1 ratio 1750 rpm 1.15 hp
works great
|
|
|
Morse 37L-B 1-LR Gear Reducer
Item sold as pictured.
|
|
|
MORSE XF1195-JO2K MAX INPUT HP 1.73 1750 RPM RATIO 20 GEAR REDUCER USED
We do honor our 14 day return policy. If you should get an item that does not work, unless otherwise stated in that items description. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WHAT YOU SEE IN THE PICTURES. IS WHAT WE SEND TO YOU! CHECK OUT OUR SALE ITEMS IN OUR STORE! MORSE GEAR REDUCER XF1195-JO2K MAX INPUT HP 1.73 OUTPUT TORQUE 1058 1750 RPM RATIO 20 APPROXIMATE SHIPPING WEIGHT 60 LBS SKID-1-11 USED WE APPRECIATE YOUR BUSINESS. AND WISH TO MEET YOUR NEEDS. PLEASE CALL 731-635-3167 WITH ANY QUESTIONS. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS ... moreWILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, AND READ THE IMPORTANT INFORMATION ABOUT DESCRIPTION BELOW! Please understand that our items are surplus. They come here from factories that have been closed or from other similar situations. Therefore. We do not have first hand knowledge of their history. We do not have the equipment to test many of these items, therefore, we do not know if they are in perfect working condition. We try to be as accurate as possible with our listings. But we are not experts and many of our items are things we know nothing about. There is no eBay condition description for surplus items, so please do not rely solely on the standardized condition description from eBay. We use our best judgement on the condition, and include lots of pictures. Please look closely at the pictures. And contact us with any questions or to ask for more detailed pictures if needed before making your decision to purchase. We have no desire to mispresent. ALL OF OUR SALE/CLEARANCED ITEMS ARE SOLD AS IS. NO RETURNS* ALL PAYMENTS AND FREIGHT SHIPMENTS ARE TO BE MADE WITHIN 5 DAYS. COMBINED SHIPPING IS ALWAYS AVAILABLE. AND
|
|
|
MORSE RAIDER 237Q56H40 GEAR REDUCER 40:1 RATIO ***XLNT***
Up for auction we have a gear reducer that was rebuilt by manufacturer in 2008. This was a surplus item from a closed plant. If you found this item. You know what you are looking for. Posted below are the item spec's. If you have any questions feel free to ask or call me at(615) 767-1856 Thanks. Steve Specifications, Ratio, 40:1 Ratio, Nominal Output RPM@1750, 43.7, Construction, Cast Iron, Center Distance, 2.37" Center Distance, Input Type, C-Face Quilled Input, Output, H) Hollow Output, Input Bore(C Face) 0.625, Max OHL(Output Shaft) 843, Mechanical Input HP Rating@ 1750, 0.99, Mechanical Output Torque Rating@ 1750 Input, 1057, Output Shaft(U) 1.4375, Thermal Input HP Rating@ 1750 Input, 0.83, Thermal Output Torque Rating@ 1750 Input, 891, Weight, 37.56
|
|
|
BALDOR DC MOTOR W/ MORSE GEAR, .75 HP, RPM 1750, RATIO 10.1, CDPWD3436, USED
BALDOR DC MOTOR DIRECT CURRENT MOTOR CAT# CDPWD3436.75 HP RPM 1750 FR 56C VOLTS 180 WITH MORSE GEAR RATIO 10.1 SHAFT: 1 3/4" X 1" USED APPROX. SHIPPING WEIGHT 62 LBS(20 X 11 X 9) SKID TK INTERNATIONAL BUYER-PLEASE NOTE: BUYER IS RESPONSIBLE FOR ARRANGING ALL INTERNATIONAL FREIGHT. INCLUDING ALL PAPERWORK AND INSURANCE FOR ITEMS PURCHASED. IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Morse Raider Gear Reducer - 133ULR20
Morse Raider Gear Reducer- 133ULR20 HP@1750 =.40. Ratio 20:1 Output Torque = 235 in-lbs Excellent Condition. About 20Hrs. of use Buyer Pays Shipping.
|
|
|
Used Morse 18GSA 40:1 Speed Reducer Gear Box Lot# 34-15 Used
Used Morse 18GSA 40:1 Speed Reducer Gear Box Lot# 34-15. Input shaft 5/8" w/ 3/16" key. Output thru shaft 3/4" w/ 3/16" key. HP 0.35@ 1750RPM. Paint chips and some scuffs but overall great condition.
|
|
|
MORSE 237Q56R10 RAIDER 2.90HP 10:1 56C WORM GEAR REDUCER D278233
Product Specifications. Brand: MORSE, Condition: Used, Model: 237Q56R10, Input Diameter: 5/8 IN, Output Diameter: 1-1/8 IN, HP: 2.90 HP, Ratio: 10:1 Frame: 56C Type: Worm Gear Shipping Weight: 33.40 lbs, Shipping Dimensions: 8.75 x 8.50 x 8.25 in, SKU: D278233(KFP) Category: Power Transmission· Gear Reducers, Additional Notes: SOME SURFACE RUST RAIDER, Product Photos. $179 USD- We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship items within 1 Business Day of receiving cleared payments. We can ship through express or overnight ... moreUPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. We only offer Collect Shipping via UPS. If the item is to be shipped via Freight. Please contact us for a shipping quote. You may also choose to have your shipment picked up by your carrier. We will palletize, strap and shrink-wrap your shipment. We offer a 7 day courtesy holding period for our clients, but shipments are subject to storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence as we put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer an amazing buying experience to all our customers. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pi
|
|
 |