|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: Used Location: Phoenix, United States
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description： -Includes A 3-Pin Triangular Plug, Charges For EZGo TXT / RXV Golf Cart Battery. -Input Low Voltage And Overvoltage Protection * Charger ... moreOverheat Protection * Output No-Load Protection * Output Short Circuit / Reverse Connection Protection * Output Overcurrent / Overvoltage Protection * Automatic Shutdown When Fully Charged. -The Shell Is Made Of Aluminum Casting,Waterproof And Dustproof Rating Of IP67, Comfortable Carrying Handle. -Led Olid Green:The Charger Is Ready To Charge, Or Charging Is Complete; Led Green Blinking:The Charger Is Charging. Please Check And Then Match The Output Voltage And Charging Gun Model Of Your Original Charger. Package Includes：.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Type I 0.75KW VFD/ 1HP. And your motor power should not be more than TWICE the power of this VFD. Type II1.5KW VFD/ 2HP. Type III 2.2KW VFD/ 3HP. DC Cooling ... moreFan: The variable frequency drive is equipped with a fan to improve the stability of the inverter.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States MACROMATIC PMPU. Unlike similar three-phase monitor relays, the PMP Series will continue to function even with a lost phase. Phase Monitor Relay,190-500VAC,Plug,SPDT. ... moreDiversion contrary to U.S. law is prohibited.
Buy It Now
$8.00 Shipping Condition: New – Open box Location: Santa Monica, United States Exact item shown, DC to DC converter module made by SCI, ASTEC was a second source, the photocopy data sheet (included with the item) is from Astec, 5VDC ... moreout, 9-36VDC in.
Buy It Now
$13.60 Shipping Condition: New Location: Santa Fe Springs, United States They are specifically designed for fractional horsepower permanent magnet (PM) DC motors. The KBWM-120 is designed for 115 VAC input and is rated 1/100 ... more- 1/3Hp at 90 VDC. For motors rated 1/50 - 3/4 Hp at 180 VDC use Model.
Buy It Now
Free Shipping Condition: New – Open box Location: Burlington, United States HP 406362-002; AC-059 A AC POWER MODULE 3PH NOS. Surplus Inventory. Item pictured is the exact item you will receive. Condition Notes: No Box.
Buy It Now
Free Shipping Condition: New – Open box Location: Athens, United States I try to match CURRENT cheaper price (I don’t match past prices).
Buy It Now
Free Shipping Condition: New Location: Saint Paul, United States Manufacturer Yaskawa. VFD Torque Variable Torque. VFD Application Fan.
Buy It Now
$6.71 Shipping Condition: New Location: Lafayette, United States L510,230V,1IN/3OUT-PHASE,2HP,CHASSIS.
Buy It Now
Free Shipping Condition: New Location: Sanborn, United States 5 Hp Phase Converter Control Panel RP05 Brand new phase converter control panel. To be used in conjunction with a 5 hp three phase motor. With this setup ... moreyou will have a 5 hp rotary phase converter, your 5 hp motor should be rated at 230volt or 230/460volt and a rpm of 17XX or 34XX. Please compare and checkout the features of this control panel. Builtin push button start and stop With this setup your phase converter can not self start itself. If there was a power loss and the power came back on. You would need to press the start button to restart up the phase converter, if you had a on-off switch setup your phase converter and your load would try to power up at the same time.which could lead to problems with the phase converter or load or both. Built in starter contactor for single phase input Power Indicator light Heavy duty run capacitors rated at 370vac Balance the generated phase from L1 and L2 with dual run capacitor circuit Heavy duty start capacitors with discharge resistor rated at 250vac 50 amp rated voltage sensing relay that controls the starting circuit of the phase converter. Oversizes terminal block rated at 63amps to connect to your idler motor and three phase load. Ground lug Instructions 2 year warranty If you have any other questions on sizing up or need a different size unit.please call 716-304-1929 Thank you Please Visit WNY-Supply Ebay Store for more. Static Phase Converters Solid State Phase Converters Phase Converter Kits Rotary Phase Converters Rotary Phase Converter Panels Phase Converter Parts Check out my other items! Powered by
Buy It Now
$4.45 Shipping Condition: New Location: Clearwater, United States DUAL CHANNEL OPTOCOUPLER. HP PART # HCPL-2730. Depending on weather, your location, or other unforeseen circumstances, your item may take longer to reach ... moreyou. We will try and send a revised invoice asap, although there will be a delay on the weekend.
$15.75 Shipping Condition: Used Location: Great Falls, United States CAN RUN ON 120VAC OR 220VAC INPUT POWER, 50 OR 60 HERTZ., MASSIVE LOGIC POWERING, ETC. BUILT TO TYPICAL HP HIGH QUALITY STANDARDS. DESIGNED FOR DESKTOP ... moreUSE BUT CAN BE RACK MOUNTED.
Buy It Now
$61.35 Shipping Condition: New – Open box Location: Cave City, United States OUTPUT TORQUE 754 LB INCH ----- NEW SURPLUS NOT IN FACTORY PACKAGE/BOX ----- 02/17/PNB.
Buy It Now
$5.80 Shipping Condition: Used Location: Colorado City, United States pulled from working testset
Buy It Now
$17.40 Shipping Condition: Used Location: Bedford, United States Applied Kilovolts Power Supply for Mass Spectrometer, HP005NZZ447, Input: 24V 1A. Taken off of TruTOF HT GCMS Mass Spetrometer 614-300-100. Check out ... moreour Ebay store (kenyonandsons) where we have a huge selection of industrial, electrical, lab equipment, and supplies available. We also sell forklifts! Thanks. MB
Buy It Now
Free Shipping Condition: Used Location: West Berlin, United States Coaxial Detector. Positive Polarity, 3.5 mm (M) to SMC (M). HP / Agilent 08672-60129 (33330B-003). 0.01 to 18 GHz, 200 mW Max Input.
Buy It Now
$9.00 Shipping Condition: Used Location: Riverside, United States HPDL 2416 REAL HP units. 2 chip enables. 7 bit ascii input.
Buy It Now
$10.00 Shipping Condition: New Location: Star, United States New TCI Trans-Coil KDRULA9L Input Line Drive Reactor 480V 3A 1.5HP PLC GA. Never used. Any questions please send me a message.
Buy It Now
Free Shipping Condition: New Location: Sanborn, United States It will provide power for a 220v - 3phase motor rated between 3 HP and max of 5 HP. Model number is SCM05. This is a new static phase converter unit that ... moreI can be used to power a milling machine, drill press, lathe or any easy to normal starting load.
Buy It Now
$6.00 Shipping Condition: New – Open box Location: Osceola, United States This Pass & Seymour PowerPack features a Through-Hole mounting style and has a Nominal Current Rating of 20 A with a Nominal Voltage Rating (AC) of 120 ... moreV. The color of this Enclosed construction type is Beige. With an Inrush Current Rating of 20 A, this PowerPack is ideal for Indoor Installation Area and can be used for various applications such as Ballast, Incandescent, and 1HP.
Buy It Now
Free Shipping Condition: New Location: Alhambra, United States This is a NEW SL32-2R025 Circuit Protection Thermistor by Ametherm/ AS32-2R025 This part is a direct replacement for the AS32-2R025 ~ it is just a bit ... moresmaller in size ~ ATTENTION POOL OWNERS ~ If you own a HAYWARD Aqua-Rite Goldline- Salt Chlorinator and you have NO POWER LIGHT on ~ this is probably the problem! Before you invest BIG BUCKS in replacing the wall mounted control panel ~ try this! It has save many buyers many hundreds of dollars. This device is a"thermal protector" and over the years they get warm and crack Frequently a"nearby lightning strike will"fry them" Its a CHEAP FIX that Hayward and most pool repair guys WILL NOT tell you about ~ they want to sell you a NEW unit Double click to see photo#2 showing what the damaged part will look like Its very simple to change with a soldering gun Product Information THERMISTOR Thermistor Type: NTC Resistance: 2ohm Thermistor Tolerance: 15% to +15% Thermistor Case Style: Radial Leaded No. of Pins: 2 Dissipation Constant: 45.4mW/°C Leaded Process Compatible: Yes Mounting Type: Through Hole RoHS Compliant: Yes SHIPPING IS FREE
Buy It Now
Free Shipping Condition: New Location: Mentor, United States MAGNECRAFT Struthers and Dunn - A283XBXC1-120A Relay, power. Coil Resistance: 2250 Ohm.
Buy It Now
Free Shipping Condition: New Location: Sanborn, United States 1- 3 Hp Heavy Duty Static Phase Converter MILL SAW DRILL LATHE Made in USA SCX03 single to three phase WNYSUPPLY PHASE CONVERTERS Converter Type Static ... moreModel# SCX03 Voltage 208-240 Cycles 50/60 Minimum/Maximum Motor HP 1- 3 Maximum 1 Phase Amps 10.8 3 Phase Load Type Motor( 2/3 capacity) Warranty 2 Years* Manufactured in United States of America About WNY Phase Converters WNY Supply has been manufacturing and selling phase converters for almost 4 decades. We know that technical support is important for your power conversion success. Our technical support team is dedicated to assist you with every aspect of your converting needs. From choosing the right style of converter and to give any help you may need in the proper installation and operation of the converter on your machine. Tech support is a call away 24/7, just give us a call at 716-304-1929. In 2008. We designed the SC series static phase converter. A low cost, compact unit that is easy to setup and use. This style of converter has becoming one of the top selling converters on Ebay with a volume over 1300 units per year. During that time period we listened to our customers input on manufacturing a better unit. We have now simplified input, output and ground terminals, indicator lights on front face of the converter, knockouts on each side of the converter, heavy duty starting circuit that gives you up to 50 starts per hour* and a lightweight custom designed enclosure made from AL alloy. Some of our competitors give less than 10 starts per hour! 5 Key things to look for in a static phase converter Heavy duty parts: Every part used in making the SCX series is U/L. CSA approved. Standard with our SCX model are full voltage rated capacitors and a heavy duty sensing control circuit, indicator lights to verify operational status, enclosured constructed from aircraft AL alloy making it light weight and resistant to corrosion, all non-insulated crimp terminals are crimped and solder assuring the best electrical connection you can have. Repairablity: The SCX
Buy It Now
$5.07 Shipping Condition: New Location: Bogalusa, United States HP CG141A HP Input Air Filter C Retail Photo Shop New in Box
Buy It Now
Free Shipping Condition: Used Location: West Berlin, United States HP / Agilent 6214C. 0 to 10 VDC, 0 to 1 A, 3-Turn Pots.
Buy It Now
Free Shipping Condition: Used Location: Sacramento, United States It is also subject to change during peak periods. We work hard to include a lot of pictures of each item. Most of our photos are of the actual item you ... moreare purchasing.
Buy It Now
$11.35 Shipping Condition: Used Location: Burnsville, United States Output: 12 VDC, 38 A Max // 5 VDC, 42 A Max // 5 VDC, 2.7 A Max. Input: 100-240 VAC, 7.6-3.0 A, 50/60 HZ, 584 W. The pictures provided are of the item ... moreunless otherwise stated. Our hours of operation are.
Buy It Now
$45.00 Shipping Condition: New – Open box Location: Jordan Type: DOL starter. Manufacturer: Eaton. USD 585,00 Sofort Kauf. HYDAC HDA 4744-A-250-000 PRESSURE TRANSMITTER. USD 95,00 Sofort Kauf. HAHN-GASFEDERN 100726.1 ... more1150 N GAS SPRING ACTUATOR. USD 79,99 Sofort Kauf.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Type I 0.75KW VFD/ 1HP. And your motor power should not be more than TWICE the power of this VFD. Type II1.5KW VFD/ 2HP. Type III 2.2KW VFD/ 3HP. DC Cooling ... moreFan: The variable frequency drive is equipped with a fan to improve the stability of the inverter.
Buy It Now
Free Shipping Condition: New – Open box Location: Montgomeryville, United States SURPLUS NEVER USED - Reliance DCS 803611-SE POWER MODULE 30/40HP 65 AMP 3 PHASE INPUT STOCK 1661C
Buy It Now
Free Shipping Condition: New Location: Chino, United States Type I 0.75KW VFD/ 1HP. And your motor power should not be more than TWICE the power of this VFD. Type II1.5KW VFD/ 2HP. DC Cooling Fan: The variable ... morefrequency drive is equipped with a fan to improve the stability of the inverter.
Buy It Now
$10.00 Shipping Condition: Used Location: Coffeyville, United States MICRO SWITCH FE-MLS-8B MODULATED PHOTOELECTRIC CONTROL PHOTO EYE-HEAD-CONTROL JUST AS YOU SEE IT DON'T KNOW MUCH MORE THEN THAT. RELAY WORKS WHEN ... morePLUGGED IN NOT SURE WHAT ELSE IT IS SUPPOSED TO DO I purchased this from a local Estate Auction CHECK OUT MY FEEDBACK! I take Pride in my customer Satisfaction! I will be listing more Auction items so check back soon You may be interested in on eBay. I combine purchases to reduce shipping costs and I sell Worldwide Satisfaction Guaranteed! Please Feel free to ask Questions THANKS FOR LOOKING My Policies: Payment Instructions: I accept PayPal for payment. I prefer PayPal. I require that payment be made within 3 days of the end of auction. Please Email me if you have any questions before you bid. Happy bidding! See PHOTO above to check EXACTLY what youre bidding on Feedback: I take pride in my feedback and strive for 5 Star Service. If you have a problem. Please email me before leaving bad feedback so that we can work something out. Shipping Instructions: US Buyers: I use USPS Mail for most shipping needs- Purchases over $250 Will be sent with Signature Conformation International Buyers: International buyers If you need you can contact me prior to bidding to obtain a shipping quote. International buyers can choose how fast they wish delivery by USPS meaning Global Priority. Air Letter Post or Economy Letter Post. All of my shipping charges vary depending on the weight of the item. I will gladly combne Shipping with any of my other auction. drop me an email before bidding and I will try to respond within 24 hours. Important Notice to International Buyers Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are assessed and collected by your nation's government and are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs. If any, will be prior to bidding or buying. Please be aware that items may be delayed by customs. SOMETIMES MORE THAN A MONTH. P
Buy It Now
$6.16 Shipping Condition: New Location: Burnsville, United States AC Power Adapter. Our hours of operation are The pictures provided are of the item unless otherwise stated. We are located in Burnsville, MN.
Buy It Now
$20.00 Shipping Condition: New Location: Heath Springs, United States SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, AND READ THE IMPORTANT INFORMATION ABOUT DESCRIPTION(BELOW) PLEASE CHECK OUT OUR SALE ITEMS ... moreIN OUR STORE! KB PENTA POWER PENTA-DRIVE DC MOTOR SPEED CONTROL MODEL: KBPC-240D(9338) 115/230 VAC 50/60 HZ NEW IN BOX. OLD STORAGE JP IF YOU HAVE ANY QUESTIONS PLEASE CALL US AT 731-635-3167 Please understand that our items are surplus. They come here from factories that have been closed or from other similar situations. Therefore. We do not have first hand knowledge of their history. We do not have the equipment to test many of these items, therefore, we do not know if they are in perfect working condition. We try to be as accurate as possible with our listings. But we are not experts and many of our items are things we know nothing about. There is no eBay condition description for surplus items, so please do not rely solely on the standardized condition description from eBay. We use our best judgment on the condition, and include lots of pictures. Please look closely at the pictures. And contact us with any questions or to ask for more detailed pictures if needed before making your decision to purchase. We have no desire to misrepresent. We do honor our 7 day return policy. If you should get an item that does not work. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WE APPRECIATE YOUR BUSINESS. AND WISH TO MEET YOUR NEEDS. ALL PAYMENTS ARE TO BE MADE WITHIN 5 DAYS. IF YOU PURCHASED AN ITEM THAT REQUIRES FREIGHT SHIPPING. SHIPPING ARRANGEMENTS ARE TO ALSO BE MADE WITHIN 5 DAYS. COMBINED SHIPPING IS ALWAYS AVAILABLE. AND THANK YOU FOR SHOPPING WITH US! Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: Used Location: North Hollywood, United States Good condition used.
Buy It Now
Free Shipping Condition: New Location: Camden, United States 100-240 VAC INPUT. IT DOES NOT INCLUDE HAWAII, ALASKA, PUERTO RICO, GUAM, OR ANY OTHER US ISLAND TERRITORIES.
Buy It Now
$8.50 Shipping Condition: Used Location: Phoenix, United States HP 10514A Option H58 Double Balanced Mixer 0.2-500 MHz 5mW/+7dBm Working HP 10514A Mixer Specs: Frequency Range: 0.2 to 500 MHz Maximum Input Level: 40 ... moremA Maximum Input Power: 5 mW or +7 dBm Connectors: SMB Payment: Paypal accepted. We DO NOT accept Personal Checks. Note: due to eBay's new policy. Sellers can no longer ask for Cashier's Checks/Money Orders via listings or emails. Contact should be made within 3 days and payment must be received within 10 days of winning. Payment must clear before shipping. Unpaid auction wins will be forfeited after 10 days and a Non-Payer report will be filed with eBay to recover the closing fees of the auction. Cheaper Shipping Now Available For Small Items! Read Below For Details! Shipping On This Auction: This is a'Small' item. Small' items use the following terms: USA shipping is $5.25 for USPS Priority Mail. Shipping for each additional'Small' item is $1.50. Shipping worldwide using USPS. See calculator for available options. The rate for each additional'Small' item is $2.50. We'll ship your order within 2 business days after confirmation of your order and verification of your payment information. Shipping address must match"bill to" address. Return Policy: This item may be returned within 7 days from the date you receive your order for refund of auction sale price. Shipping& Handling fees are non-refundable. Feedback Policy: When the customer is satisfied with a purchase and leaves positive feedback then we are more than happy to leave feedback in kind. We do not leave positive feedback until the customer lets us know everything is ok by leaving us positive feedback.
Buy It Now
Free Shipping Condition: Used Location: Seymour, United States This item is a new Renu Prizm Operator Interface Prizm-280 Part No. ESV222N04TFC Click here for Data Sheet If you have any questions. Please feel free ... moreto ask. Please check my other items.I will reduce shipping on multiple items whenever possible. PLEASE CHECK OUR EBAY STORE FOR MORE AUTOMATION PRODUCTS. Payment by Paypal is preferred. Payment is expected within five days of auction end. If item is being shipped to a residential address. Please add $5.00 to your shipping total. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New Location: South Korea We will respond to you within 24 hours and do our best to help you out!
Buy It Now
$16.00 Shipping Condition: New Location: Buffalo, United States P/N: H1330B VXI. Factory Date Test: 19 March 1999, Certificate of Verification Enclosed. Buffalo, New York.
Buy It Now
$12.99 Shipping Condition: New – Open box Location: Little Suamico, United States UNIVERSAL LIGHTING TECHNOLOGIESS150MLTLC30 - 500K SODIUM MAGNETIC BALLAST HX-HPF. UNIVERSAL LIGHTING TECHNOLOGIESS100MLTLC3M - 500K SODIUM MAGNETIC BALLAST ... moreS-54. Advance RS-32-40-TP-W Rapid Start Ballast 120V 60H.
Buy It Now
Free Shipping Condition: Used Location: West Berlin, United States 1450 to 1590 nm Input, 130 MHz to 20 GHz RF Output. Electrical Converter. HP / Agilent 5086-7820. -45 dBm to -3 dBm Dynamic Range, 3.5 mm (F).
Buy It Now
Free Shipping Condition: New Location: Sanborn, United States 3- 5 Hp Heavy Duty Static Phase Converter MILL SAW DRILL LATHE Made in USA SCX05 WNYSUPPLY PHASE CONVERTERS Converter Type Static Model# SCX05 Voltage ... more208-240 Cycles 50/60 Minimum/Maximum Motor HP 3- 5 Maximum 1 Phase Amps 17.8 3 Phase Load Type Motor( 2/3 capacity) Warranty 2 Years* Manufactured in United States of America About WNY Phase Converters WNY Supply has been manufacturing and selling phase converters for almost 4 decades. We know that technical support is important for your power conversion success. Our technical support team is dedicated to assist you with every aspect of your converting needs. From choosing the right style of converter and to give any help you may need in the proper installation and operation of the converter on your machine. Tech support is a call away 24/7, just give us a call at 716-304-1929. In 2008. We designed the SC series static phase converter. A low cost, compact unit that is easy to setup and use. This style of converter has becoming one of the top selling converters on Ebay with a volume over 1300 units per year. During that time period we listened to our customers input on manufacturing a better unit. We have now simplified input, output and ground terminals, indicator lights on front face of the converter, knockouts on each side of the converter, heavy duty starting circuit that gives you up to 50 starts per hour* and a lightweight custom designed enclosure made from AL alloy. Some of our competitors give less than 10 starts per hour! 5 Key things to look for in a static phase converter Heavy duty parts: Every part used in making the SCX series is U/L. CSA approved. Standard with our SCX model are full voltage rated capacitors and a heavy duty sensing control circuit, indicator lights to verify operational status, enclosured constructed from aircraft AL alloy making it light weight and resistant to corrosion, all non-insulated crimp terminals are crimped and solder assuring the best electrical connection you can have. Repairablity: The SCX was engineered and des
Buy It Now
$8.50 Shipping Condition: Used Location: Phoenix, United States Gold Plated Limiter. Photo gallery. FIRST if there is a problem or concern. See calculator for available options.
Buy It Now
$25.00 Shipping Condition: New Location: Heath Springs, United States
Buy It Now
$17.05 Shipping Condition: New Location: Rapid City, United States With this setup you will have a 7.5 hp rotary phase converter, your 7.5 hp motor should be rated at 230volt or 230/460volt and a rpm of 17XX or 34XX. ... more-Heavy duty run capacitors rated at 370vac to balance the generated leg from L1 and L2.
Buy It Now
$10.00 Shipping Condition: Used Location: Lebanon, United States Hertz: 50/60. Hertz: 0-400Hz. Notes: Allen Bradley AC variable speed drive is used for parts only. Manufacturer : Allen-Bradley Allen Bradley. Type: AC ... moreVariable Speed Drive. Availability subject to prior sale.
Buy It Now
$4.95 Shipping Condition: Used Location: Houston, United States Output: DC19.5V 2.31A 45W. HP Model HSTNN-DA40. AC Power Cord Input:AC 100-240V 50-60Hz 1.4A. Condition: (Subject to Inventory). NEMA 5-15P. Delta ADP-45FE ... moreB. Spare 744893-001.
Buy It Now
Free Shipping Condition: New Location: Logan, United States NPP1 DEFP SA. 120-277VAC, 50/60Hz, 16A Ballast. BLU - Load. BLK - 120 VAC. 120VAC, 50/60Hz, 1/2HP, Motor. RED - Line. 120-277VAC, 50/60Hz, 16A, Tungsten. ... moreWHT - Neutral.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Type I 0.75KW VFD/ 1HP. And your motor power should not be more than TWICE the power of this VFD. Type II1.5KW VFD/ 2HP. Type III 2.2KW VFD/ 3HP. DC Cooling ... moreFan: The variable frequency drive is equipped with a fan to improve the stability of the inverter.
Buy It Now
Free Shipping Condition: Used Location: Baltimore, United States As PLC Hardware is not an Authorized Distributor of the products,manufacturers' warranties and support do not apply. All listed logos, trademarks or service ... moremarks are property of their respective owners.
Buy It Now
$17.05 Shipping Condition: New Location: Rapid City, United States Phase Converter AR10- 10 HP Pro Series. This 10 HP Pro Series Phase Converter manufactured in the USA by American Rotary is built using longstanding. ... moreReliable electromechanical controls designed for Phase Converter use, and used continuously by American Rotary for over 12 years. The AR series provides utility grade power can power virtually any 3-phase equipment. Phase Converter AR10- 10 HP Pro Series. This 10 HP Pro Series Phase Converter manufactured in the USA by American Rotary is built using longstanding. Reliable electromechanical controls designed for Phase Converter use, and used continuously by American Rotary for over 12 years. The AR series provides utility grade power can power virtually any 3-phase equipment. Best for: 5HP General Purpose. CNC, motor loads, combination loads, light to heavy loads. For a 10HP load, see our Single motor start. Total motor run. CNC. Resistive. Cost to run. 5HP 15HP 5HP/3.7kW 14 amps $.15/hr American Rotary Phase Converter Simple Installation Video. In this video. We show the basic installation techniques of the American Rotary Phase Converter Panel. The idea is to show how easy it is to install, and also to provide a video reference for our customers. Power an entire shop with 3-phase. Quiet. Continuous operation. Reliable& convenient alternative to utility 3-Phase. Affordable. Safe, Professional. American Rotary engineers the entire phase converter system to provide optimum performance. Our variable impedance generator(VIT) TM and MicroSmart TM controller combine to make the most powerful and precise rotary phase converter on the market. The following sizing method has been used by American Rotary Engineers to sucessfully size tens of thousands of phase converters. For additional sizing assistance call 1-888-743-6832. American Rotary AR10 General Specification kW of Generator(based on FLA) Idler/Generator FLA Frequency(Hz) Generator Type Magnetic Starter Panel Enclosure Tem
Buy It Now
$5.45 Shipping Condition: New Location: Adamstown, United States The HPDL-1414 has a character height of 2.85 mm (0.112"). 2 PCS HPDL-1414. ESD Protection @ 1.5 kΩ, 100 pF. . VZ = 2 kV (each Pin). below Seating Plane, ... moret
Buy It Now
Free Shipping Condition: Used Location: Baltimore, United States Rockwell Automation > Sensing, Safety & Connectivity > Safety Components > Safety Relays > 440R-M23147/B. Manufacturer: Rockwell Automation. Notes: The ... moreunit is Series B. The Serial Number in the pictures has been altered for privacy purposes.
Buy It Now
$18.59 Shipping Condition: For parts or not working Location: Farmingdale, United States The Keysight 478A provides high efficiency and good radio frequency (RF) match. Model: 478A. SOLD AS-IS, UNIT DOESN'T WORK. Available Options: 478A-H75 ... moreand 478A-H76 for the frequency range 1 MHz to 1 GHz (Max. ).
Buy It Now
Free Shipping Condition: New Location: South Korea We will respond to you within 24 hours and do our best to help you out!
Buy It Now
Free Shipping Condition: New Location: Caledonia, United States They have a cast aluminum shell that functions as a heat-sink and are quite thoroughly potted and sealed. Input wires are heavier gauge than the output ... more(which makes sense as they will have the higher current load).
Buy It Now
Free Shipping Condition: Used Location: Houston, United States used but in good condition, comes only as shown, no other kind of accessories included apart from what is pictured, pulled from a working item .
Buy It Now
Free Shipping Condition: New – Open box Location: Bhavnagar Wadva S.O, India Spare number: 406867-501. output: 775w max. [not included in price]. ref no: 35490. weight: 2.300 kg. product of china. ct: 5a74b0d4duc08z.
|
|
|
|
BOSTON GEAR REDUCER # FWA738900B56 - RATIO 900:1 - .37 HP INPUT - 1750 RPM
BUYING 1 BOSTON GEAR REDUCER. CAT. FWA738900B56, RATIO 900:1, INPUT HP.37, OUTPUT TORQUE 5900 IN. LB. 1.0 SF, 1750 RPM INPUT,ITEM IS USED,IT TURNS FREELY, 56C QUILL INPUT, 1 5/8" X 3 1/2" OUTPUT SHAFT, HAS DOUBLE REDUCTION. 6065 C-3-4-2-A Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
DAYTON 10:1 MODEL 4Z306B GEAR BOX INPUT HP MAX 2.0 OUTPUT TORQUE 648 IN. LBS.
Gently used! Shaft dia. is 1" and length is 2" Shaft hole is for a 5/8" shaft. Flange holes are roughly 5 7/8" across and 4 1/8" apart. This gear box weights almost 24 lbs. If you have any questions and need a quick response feel free to call 573-888-7303. Check sellers other items for more industrial supplies! Thanks for looking and or purchasing!
|
|
|
58:1 RATIO Gear Reduction Speed Reducer Box MARKET FORGE .465 hp, 1800 rpm input
VINTAGE 1974 MARKET FORGE SINGLE REDUCTION WORM GEAR BOX 0.58:1 Ratio 90 Degree(Right Angle) Speed Reducer. TO ENSURE THE SHIPPING COST IS ACCEPTABLE TO YOU. PLEASE CHECK THE SHIPPING CALCULATOR BEFORE YOU BID ON MY AUCTIONS. Thanks. Detailed info on how my multiple item shipping discount is calculated is provided below under"Shipping Notes" ITEM DESCRIPTION: I found this piece many years ago while helping someone clean out the cellar of an old commercial building. At the time. I figured I may have a use for it some day. As the years pass that's looking more and more unlikely so better it should be passed on to someone else! It's a nice. Old worm gear reduction box. Not including the shafts, it measures about 6" long, 4 3/4" wide and 6 1/4" tall. The keyed shaft diameters and lengths are: input 5/8" by ... more1 15/16" output 7/8" by 1 5/8" The label states: Market Forge. Everett, Massachusetts, 02149; Model 3CT; Ratio 58; Serial A33-305C; Input R.P.M. 1800; Service Factor 1; Date 4/74; Input H.P. 465& Output Torque(inch lb) 451. The input shaft does have a small amount of backlash(less than 1/4 turn) There are 3 notations, in"magic marker" on the case as if it had been rebuilt and/or tested. I'm not sure what the marks on the input and output sides say but the top mark says"OK" Both shafts have their share of nicks and scrapes but are still quite serviceable. Don't let the small size fool you. it's a heavy little devil! SHIPPING NOTES: See Calculator for S&H. Delivery confirmation is required& included in the calculator price. NO INTERNATIONAL SHIPPING! Please don't ask. I've simply gotten screwed too many times! Ebay now forbids the insurance option for some bizarre reason! I reduce the shipping on second items by about 50% and 75% on additional items. Do NOT rely on the calculator to get the combined shipping correct. I will send an invoice with the correct total when the auctions end. The shipping discount only ap
|
|
|
STERLING 4FQ87S030 RIGHT ANGLE SPEED REDUCER - 30:1 GEAR RATIO, 1.68 INPUT HP
This item is being listed as used but shows little. If any, wear from use. It is in working condition. Please see pictures to determine cosmetic condition. Accepted payment: PayPal Payment must be made within 5 days of auction's close. Items generally ship within 1 business day of clearance of payment. Buyer will be notified if there is any unforeseen delay. Please see our returns policy at the top of this listing. We participate in eBays returns program. Buyer is responsible for all customs duties. Fees, and taxes incurred during international shipment. An item stated as a"parts/repair item cannot be returned for replacement or refund. If you are purchasing multiple items. Email us to get the best shipping price possible. Powered by
|
|
|
Reliance Electric Master XL Speed Reducer ID# 2533361003PT Max input HP 1.21
Search Description Reliance Electric Master XL Speed Reducer ID# 2533361003PT 07916522WL Max Input HP 1.21 Input RPM 1750 Torque cap. in lbs. 990 Ratio 30.0. 4/17/12 KM 52. We accept payment through paypal. But we are also open to other forms of payment. We can accept credit cards through our physicak business, Cash on Pickup and will accepts your checks if you would like( item held from shipment until payment clears) Please contact use if you would like to pay by another way and we will do our best to work with you. We ship as quickly as we can. We often reuse old boxes that are still in good shape to help save trees. Please be considerate of this if you get a box that is old. The faster you pay the quicker we can ship. We use caculated shipping using a stadardized shipping for. We do send items the quickest way that is payable by your shipping ... morefees, we often upgrade to priority service on orders because the price is close to slower services. If there is a difference in cost we will pick this up for you. Be sure to read all terms in the listing. Surplus Equipment Supply. Hartsville(MAIN) Office: 122 Rogers St. Suite 3. Hartsville.Tn.37074 Hartsville Office:615) 374-9738 BUYERS& SELLERS OF GOOD USED EQUIPMENT $$$$ ACTIVELY BUYING YOUR SURPLUS/BONE YARD EQUIPMENT $$$$. I try to be as accurate as possible. But I am not familiar with every piece of equipment that I sell. I also have several people listing items that do not know anything about the items, so, please take time to look at all the photos, because what you see is what you get. We buy Truckloads of equipment at a time and sometimes do not have time to check all the machines out to see if they work or not. You are buying just like I am. And you must remember that you are buying a lot cheaper than the other guys are selling. If I have checked the machine out, I will list it as Working or Not Working. The majority of our items are as is and untested. We plug most machines in and if they come on we will let you know. Please be sure to read all the listing
|
|
|
UNILINE 2000 B2238-MC56 RIGHT ANGLE GEAR DRIVE 1,750 INPUT HP OUTPUT TORQUE 1082
USED OHIO GEAR UNILINE 2000 B2238-MC56 RIGHT ANGLE GEAR DRIVE 1.750 INPUT HP OUTPUT TORQUE 1082 IN WORKING CONDITION CLASS 1 RATING RATIO 20-C MAKE US OFFERS WE ARE CLEARING OUT INVENTORY DISCOUNTS FOR LARGE QUANTITY PURCHASES New items posted daily* If you need more of this item contact us. We may have others in stock. We ship by US Prioirty Mail or UPS. UPS can not deliver to PO Boxes. If you need another way of shipping besides what we have listed let us know. We combine shipping on multi-lot purchases to save you money. Orders typically ship within 24-hours after payment is received. We accept payment by PayPal. Item comes with a 14 day money back guarantee. It is otherwise sold by Component Traders with no other warrantee given. Expressed or implied. Please check out our for great deals. Thank you for looking at our products Componenttradersllc ... more2729 Riverside Drive Lexington NC 27292 About us: 1- We buy excess inventory. 2- Out Facility has the ability to test parts on Location. 3- We are a complete service company for the electronic industery. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Ohio Gear DPL425-MC56 100:1 Speed Reducer Gear Box 1750 RPM 2.85 Input HP
Bullseye Catalog# 32421 Ohio Gear DPL425-MC56 100:1 Speed Reducer Gear Box 1750 RPM 2.85 Input HP SPECIFICATIONS Ratio: 100:1 Input HP: 2.85 Input RPM: 1750 Output RPM: 17.5 Input shaft diameter: 3/4" Output shaft diameter: 1-3/4" Vent included Output torque: 7984 in/lb Approximate dimensions of main body not including bell shaped motor adaptor(If Included) Length: 18" Width: 10" Height: 18" All gear reducers must have a breather vent. This allows for expansion and contraction of the air within the casing as a result of temperature changes. If a gearbox is used without a breather. Oil leakage and seal failure may result. Gear boxes may or may not have oil or breather. Buyer is responsible to insure gear box is properly vented and has proper oil and oil level prior to use. Weight: 211 lb 0 oz, CONTACT INFO Contact ... moreus Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We ch
|
|
|
Dodge 11-3660 Size 11 5.61:1 Torque Arm Speed Reducer Gear Box 4.3 Input HP
Bullseye Catalog# 32413 Dodge 11-3660 Size 11 5.61:1 Torque Arm Speed Reducer Gear Box 4.3 Input HP SPECIFICATIONS Ratio: 5.61:1 Input HP: 4.3 Input RPM: 2248 Output RPM: 400 Input shaft diameter: 1.125" Output shaft diameter: 1.4375" Female Vent Not included Approximate dimensions of main body not including bell shaped motor adaptor(If Included) Length: 10" Width: 6" Height: 8" All gear reducers must have a breather vent. This allows for expansion and contraction of the air within the casing as a result of temperature changes. If a gearbox is used without a breather. Oil leakage and seal failure may result. Gear boxes may or may not have oil or breather. Buyer is responsible to insure gear box is properly vented and has proper oil and oil level prior to use. Weight: 35 lb 0 oz, CONTACT INFO Contact us Monday- Friday ... more6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carri
|
|
|
Boston Gear Speed Reducer 700 Series F715-50-B5-G 1/4 HP Input Ratio 50:1
~~ Please read the description below the photographs ~~ This listing is for a used Boston Gear speed reducer. Model F715-50-B5-G. Please refer to the pictures for specs. Reducer was in good working condition when removed from service but is being sold as-is. New York State resident buyers: As indicated in the'Shipping and Payments' section. I collect sales tax on items sold to NY residents. Unless you can provide me with a valid NYS sales tax certificate, please be prepared to pay 8% sales tax on your purchase. Welcome to Plattsburgh's Pbay! Located in Plattsburgh. NY, Pbay is a professional eBay selling service. All items listed are on consignment. See my other auctions for a wide variety of items. POLICIES I provide accurate listings. Fair pricing, and fast and safe shipping of new and used items that are consigned to me by ... morelocal clients. Payments Payment in full is required within 3 days of auction end. I reserve the right to relist items that have not been paid for in a timely fashion. Shipping Guidelines HANDLING CHARGES: Some auction and buy-it-now items are subject to a nominal handling charge of.50-$2.00. I purchase NEW boxes for secure shipping. So the small handling charge is designed to help offset the cost of packaging supplies like boxes, bubble wrap and tape. NOTE: Any handling charge is included in the total shipping cost that you see when you view the listing. Also. I do not charge handling(beyond the first item) on combined purchases when shipped together. COMBINED SHIPPING: Yes. I am always happy to combine shipping for multiple items. Please email me for a quote. SIGNATURE CONFIRMATION: At my discretion. I will include signature confirmation on orders valued over $50. Signature confirmation ensures that YOUR package reaches YOU, thus protecting your investment. It also protects the consignor's and seller's earnings from the sale, and minimizes the potential for fraudulent claims. Handling Times I promise to ship all items wit
|
|
|
Browning Gear Reducer 20601-LR60 1750 RPM Model B .53 Input HP
Reducer You are bidding on Browning Gear Reducer. Model 20601-LR60. Item is used, but in good condition. Unit shows signs of cosmetic wear and markings from previous owner, but nothing that will affect the unit's function. Oil may have been drained. Be sure to check oil level before the unit is installed. Part No: 20601-LR60 Input RPM: 1750 Model: B Input HP: 53 Ratio: 60 Output Torque: 605 in lbs Class of Service: 1 Input Shaft: 5/8” Output Shaft: 7/8” Shipping: Charged according to location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
GROVE GEAR GEARBOX B232-2 9.13 INPUT HP 5:1 RATIO
GROVE GEAR GEARBOX B232-2 9.13 INPUT HP 5:1 RATIO USED- IN GOOD CONDITION REMOVED FROM A WORKING ENVIRONMENT
|
|
|
BOSTON GEAR 001 2-9 INPUT HP 175 INPUT RPM
BOSTON GEAR MODEL 001 2-9 INPUT HORSE POWER 175 INPUT RPM 15/16 INCH SHAFT USED- IN GOOD CONDITION REMOVED FROM WORKING ENVIRONMENT
|
|
|
Winsmith Gear Reducer Model 10CTDM 1800 Input 150 Ratio 4.34 HP Unused Surplus
Winsmith gear model 10CTDM 1800 rpm input input HP 4.34 Part no. 010CCTDF3000J9 Unused surplus Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1438b626f46-0xfa-
|
|
|
Grove Gear Flexaline Speed Reducer HMQ232-1 .691 Input HP 100: 1 140TC
Speed Reducer You are bidding on one Grove Gear Flexaline Speed Reducer. Item is used. But in good condition. Unit shows signs of cosmetic wear and markings from previous owner, but nothing that will affect the unit's function. Oil may have been drained. Be sure to check oil level before the unit is installed. Model No. HMQ232-1 Ratings at 1750 RPM 1.0 Service Factor Input HP: 691 Motor Frame: 140TC Ratio: 100 to 1 Input Bore: 875” Output Bore: 1.25” Shipping: Charged according to location. Sales tax of 8% will be charged to New York State residents and businesses We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
OHIO GEAR GEAR REDUCER B325 2.67 INPUT HP 30-1 RATIO 1750 RPM
OHIO GEAR GEAR REDUCER B325 1750 INPUT RPM 2.67 INPUT HP 2367 OUTPUT TORQUE 30-1 RATIO APPROX. 7/8 INCH DRIVE APPROX. 1 3/8 INCH DRIVE USED- IN GOOD CONDITION REMOVED FROM WORKING ENVIRONMENT
|
|
|
OHIO GEAR GEAR REDUCER B2262 RATIO-40 1750 INPUT RPM 1.19 INPUT HP 1309 TORQUE
OHIO GEAR UNILINE 2000 GEAR REDUCER B2262 1750 INPUT RPM 1.19 INPUT HP 1309 OUTPUT TORQUE 40 RATIO APPROX. 3/4 INCH DRIVE APPROX. 1 1/4 INCH DRIVE USED- IN GOOD CONDITION REMOVED FROM WORKING ENVIRONMENT
|
|
|
DODGE TIGEAR GEARBOX MR94750 N VY 2.59 MAX INPUT HP INPUT RPM 1750
DODGE TIGEAR GEARBOX MR94750 N VY 56/175-5 2.59 MAX INPUT HP INPUT RPM 1750 420 OUTPUT TORQUE USED- IN GOOD CONDITION REMOVED FROM A WORKING ENVIRONMENT
|
|
|
DODGE TIGEAR GEARBOX 6019259 CC ZY 3.17 MAX INPUT HP 1750 INPUT RPM
DODGE TIGEAR GEARBOX 6019259 CC ZY 3.17 MAX INPUT HP 1750 INPUT RPM 1013 IN LB OUTPUT TORQUE USED- IN GOOD CONDITION REMOVED FROM A WORKING ENVIRONMENT
|
|
|
OHIO GEAR GEARBOX B262 1.49 INPUT HP 1313 IN LB OUTPUT TORQUE 30-B RATIO
OHIO GEAR GEARBOX B262 1.49 INPUT HP 1313 IN LB OUTPUT TORQUE 30-B RATIO USED- IN GOOD CONDITION REMOVED FROM A WORKING ENVIRONMENT
|
|
|
DAYTON GEARBOX SPEED REDUCER # 4Z720A 1/3 HP 87.1 RATIO INPUT RPM 1725 OUTPUT 20
For Sale Is A DAYTON SPEED REDUCER. EXCELLENT CONDITION. MODEL NO. 4Z720A. INPUT HP MAX: 1/3. OUTPUT TORQUE MAX: 998 IN. LBS. RATIO: 87:1. S.F. 1.0. INPUT SPEED MAX. 1725 RPM. OUTPUT SPEED: 20 RPM APPROX. INPUT SHAFT DIA. 5/8 INCH. APPROX. OUTPUT SHAFT DIA. 1 INCH APPROX. OUTPUT SHAFT LENGTH: 2 INCHES. PLEASE LOOK TO THE PICTURES FOR MORE DETAIALS AND ASK ANY QUESTION YOU MAY AHVE. AS ALWAYS. YOUR MONEY BACK IS GUARANTIED.
|
|
|
TIGEAR GEAR BOX 6041595 R AA 40:1 RATIO 1750 INPUT RPM .67 OUTPUT HP
TIGEAR GEAR BOX 6041595 R AA 40:1 RATIO 1750 INPUT RPM.67 OUTPUT HP 628 OUTPUT TORQUE USED- IN GREAT CONDITION REMOVED FROM WORKING ENVIRONMENT
|
|
|
141340 Used, Boston Gear SF71020NBSJ Gearbox, 0.87 Input HP, 20:1 Ratio
141340 Used. Boston Gear SF71020NBSJ Gearbox, 0.87 Input HP, 20:1 Ratio, 5/8" Input Shaft ID, 1" Output Shaft ID. Item shows signs of having been used- actual working function unknown. Austin Surplus SKU: 141340 Location: GRG-R15-P12-S02-0010584
|
|
|
NICE! WINSMITH 917CDT SPEED REDUCER - 10:1 RATIO - D-90 TYPE SE - 1.25 INPUT HP
Made by Peerless-Winsmith Inc. This is a speed reducer in good condition. This unit includes the vented plug. Still in original packaging as shown in the last photo. Model: 917CDT Specifications: Ratio: 10:1 Side Shaft Diameter: 1" with 1/4" keyway) Shaft Inside Bell Housing: 5/8" see the photos) Bell Housing Mounting Plate: 6.88" diameter x 3/8" thick Bell Housing Mounting Holes: 4.15" apart Bell Housing Adapter Plate Mounting Holes: 3.5" apart Mounting Base Dimensions: 4.5" x 5.5" Mounting Base Hole Dimensions: 0.4" diameter Mounting Base Holes: 3.5" x 4.6" Input RPM: 1750 Service Factor: 1 Input HP: 1.25 Output Torque: 396 Lube: AGMA 8 For Temperatures: 51-110 F Comes as shown in pictures.
|
|
|
Winsmith Speed Reducer 917, Ratio 5, Input HP 2.01, RPM 1750, Model 917CDSF
Winsmith Speed Reducer 917. Ratio 5:1, Input HP 2.01, Input RPM 1750, Model 917CDSF. Product Number: 917CSFS31100A8. Product Description: 917CDSF 5 DR 56C 5/8 Brand Name: D90-Type SE 56C Frame Motor Input Adapter. Lovejoy L-075 625 Coupling Set Included 5/8 Output Shaft. Leaks a little at one of the gaskets.
|
|
|
right angle reducer 5 to 1 double output 5/8 shaft 2 hp max 56-c input
right angle reducer 5 to 1 double output 5/8 shaft 2 hp max 56-c input. We only ship to the continental u.s.
|
|
|
Boston Gearbox cat#FWGZ26100B5G, ratio-100 TV, input hp .75, output torque-1750
EN-364 Boston gearbox Please feel free to ask any questions Comes with free shipping to lower 48 and 30 day warranty We add new items weekly to our store so check back often Unit may be seen or picked up at Holland Equipment Recovery Sales 3345 60th ST Hamilton MI. 49419 g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-145565ecbd3-0x10e-
|
|
|
BOSTON GEAR SPEED REDUCER GEARBOX F715-20-B5-G 20:1 RATIO .630 INPUT HP
BOSTON GEAR SPEED REDUCER GEARBOX MODEL: F715-20-B5-G RATIO: 20:1 INPUT HP: 630 RPM: 1750 OUTPUT TORQUE: 377 LB INCH. SHAFT LENGTH: APPROX 2" SHAFT DIA: 13/4" INPUT DIA: 5/8" 700 SERIES Condition: NEW. In box NEW. No box NEW. Old inventory X. USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: ITEM IS USED. MAY HAVE LIGHT SCRATCHING SCUFFING ETC. DUE TO USE AND STORAGE. SHAFT HAS RUST WILL BOT AFFECT PERFORMANCE. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the ... morewinning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS.
|
|
|
Falk, 200 Hp Gearbox, Input Rpm 1800, Out Rpm 510.2, Ratio 3.527, Style Parallel
Gearbox Mfr: Falk Hp: 200 Input Rpm: 1800 Output Rpm: 510.2 Ratio: 3.527 Style: Parallel Service Factor: 1.5 Model# 92Y1-S MO# 02-0R0360 Shipping weight: 2100 Lbs. Please let me know if you have any questions.
|
|
|
ACRISON GEAR SPEED REDUCER 1750 RPM INPUT 1.58 HP 15:1 RATIO CLASS 1 RATING
YOU ARE BIDDING ON A REFURBISHED ACRISON GEAR SPEED REDUCER MODEL# TM01206-749186 PART# 2070048HSS THIS IS A REBUILT UNIT 5/8" INPUT 1/2" OUTPUT 1" OUTPUT INPUT HP 1.58 HOUSING STYLE: FOOT RATIO: 15:0 1750 RPM CLASS RATING I PLEASE E-MAIL ME WITH ANY QUESTIONS CHECK OUT MY OTHER AUCTIONS Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Gearbox, Beloit, 500 HP, 1253 Input Rpm, 106.10 Output Rpm, 11.81 Ratio
Gearbox Mfr: Beloit Hp: 500 Input Rpm: 1253 Output Rpm 106.10 Ratio: 11.81:1 Style: Shaft Mount Serial# 7Y144 Order# B5111007A. 317 Pin Rpm, 3.412:1 Pin Ratio Int. 500 HP. Pin 600 HP, Int. Roll Dia. 144" Mfg. Date 12/14/87 Total weight 10.400 Lbs. Will drive 144" Dia. x 260" Face roll 20" shaft opening. Input 6 1/2" Input 4" Please let me know if you have any questions.
|
|
|
Falk, 1110YF-1LS, 1000 Hp Gearbox, Input Rpm 1020, Out Rpm 1001, Ratio 1.019:1,
Gearbox Mfr: Falk Hp: 1000 Input Rpm: 1020 Output Rpm 1001 Ratio: 1.019:1 Style: Parallel Service Factor: 2.0 Model# 1110YF-1LS Serial# 01/R04A290950 Please let me know if you have any questions.
|
|
|
Boston Gear Dual Shaft Gearbox RA1031 1750rpm input 1.57 hp
Boston Gear Dual Shaft Gearbox pic: 50815-17 loc: WR N4. Model: RA1031 1750rpm input 1.57 hp. 9/16" shafts MRO stock. Ugly but looks unused. FREE SHIPPING! AK. HI, PR: Free shipping for items via the Post Office. BUT, buyer pays actual shipping cost for items sent via UPS or Fed Ex. International buyers pay actual shipping charge(via the US Post Office) Payment: Paypal If you are the buyer of this item. Payment is expected within a five day period after purchase. If you are not able to send payment within this time frame, please contact me to make other arrangements, I am flexible. Warranty: All items are warrantied against D.O.A. it will work when it arrives) No warranty beyond that. I have made an honest and fair evaluation of this item. But I am only human. I do miss things occasionally, and if it is not as I have represented it, ... moreI certainly will do what I can to"make it right" Returns: I accept returns only for items under warranty- no returns for purchasing the incorrect item. Customer order changes, etc. Questions? 616-292-5579
|
|
|
SM-Cyclo- Sumitomo CNH-5095y -ratio 59 -HP 1750- Input 0.51-RPM gear reducer
Used. came off running equipment.
|
|
|
Hansen, 495 Hp Gearbox, Input Rpm 1165, Out Rpm 1856, Ratio 1.5909, Style 90 deg
Gearbox Mfr: Hansen Hp: 495 Input Rpm: 1165 Output Rpm 1856 Ratio: 1.5909 Style: 90 Deg. Service Factor: 2.5 Model# RND-13-BRR-VN Please let me know if you have any questions.
|
|
|
Boston Gear F71820B5G Gear Reducer 90° Angle Left Output 20:1 0.87 Input HP
Boston Gear F71820B5G Gear Reducer 90° Angle Left Output 20:1 0.87 Input HP From our inventory. We are selling a Boston Gear F71820B5G Gear Reducer 90° Angle Left Output 20:1 0.87 Input HP. Specifications: Model# F71820B5G More Information: Ratio: 20:1 Input HP: 0.87HP Output: 90° Left when Facing Output Shaft Input Shaft Diameter: 5/8" Output Shaft Diameter: 7/8" RP-2-A SKU# SB-024416 25 lbs D&S Machined Products focuses strongly on quality of items that we sell. That’s why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. ... morePlease ask. Shipping Weight: 25 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBay’s policy. However. You can use a Credit Card through PayPal as a“one time payment” Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHO
|
|
|
Dodge Reliance WM16F 1 HP Ratio 30.0 Input RPM 1750 Torque 604 Gear Reducer
PAYMENT We accept payments through PayPal only. SHIPPING All shipments go out on Monday. Payment must be received by 5PM EST on Friday for your shipment to go out on Monday. If your item weighs 150 LBS or more. It must be shipped motor freight. For Freight shipments. Payment must be received by 7AM EST Friday morning if going to be shipped on Monday to allow time to schedule a truck for pick up. BUYER PAYS SHIPPING COSTS. RETURNS ARE NOT ACCEPTED. If you have an issue or have questions. Please contact us by email or phone. sales@surplussalesusa.com(704) 798.5063 If you are satisfied with your purchase and our service please leave Positive Feedback. Thank You for Your Business! Normal 0 false false false EN-US JA X-NONE PAYMENT We accept payments through PayPal. SHIPPING All shipments go out on Monday. We try to ship as frequently as we can. ... morePayment must be received by 5PM EST on Friday for your shipment to go out on Monday. If your item weighs 150 LBS or more. It must be shipped motor freight. For Freight shipments, payment must be received by 7AM EST Friday morning if going to be shipped on Monday to allow time to schedule a truck for pick up. BUYER PAYS SHIPPING COSTS. RETURNS ARE NOT ACCEPTED AFTER 14 DAYS If you have an issue or have questions. Please contact us by email or phone. sales@surplussalesusa.com(704) 798.5063 If you are satisfied with your purchase and our service please leave Positive Feedback. Thank You for Your Business!
|
|
|
BALDOR GEARBOX F-915-15-B5-G INPUT HP .81 15:1 RATIO 312 IN. LBS. OUTPUT TORQUE
BALDOR GEARBOX F-915-15-B5-G INPUT HP.81 15:1 RATIO 312 IN. LBS. OUTPUT TORQUE 5/8" IN 3/4" OUT USED- IN GOOD CONDITION REMOVED FROM A WORKING EVNIRONMENT SMB Machinery Systems- Parts Department SMB Machinery Systems LLC The Equipment Superstore Item Description. Can't find what you are looking for? Contact us and we will check our vast inventory or contact our vendors to see if we can find what you need at a reasonable price! 15.000 Square Ft. Parts Department! Ebay Listing Section We have a vast inventory of new. Used and surplus parts including but not limited to: Motors Blowers Pumps Gearboxes Electrical Controls Chain and Belting Valves: Ammonia. Steam, Stainless Sprockets Stainless Steel Fittings Pnuematic and Hydraulic components Bearings And More! Red Richards Parts and Purchasing Manger Direct: 770-479-2698 Fax: 770-720-2011 ... more7am-5pm EST
|
|
|
GROVE GEAR IRONMAN 5.180 INPUT HP 20:1 RATIO GEAR REDUCER GRL-B-832-20-L
Concepts Industrial GROVE GEAR IRONMAN 5.180 INPUT HP 20:1 RATIO GEAR REDUCER GRL-B-832-20-L. ITEM REMOVED FROM WORKING ENVIRONMENT. GUARANTEED NOT DOA. CE656 SW/65 DS 7/3/14 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/ not working are sold as is and no returns will be accepted. Please ask any questions before purchasing ... moreitem(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received without prior written approval. Customer Service is available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours! On Jul-03-14 at 12:15:27 PDT. Seller added the following information:
|
|
|
WINSMITH 943 SPEED REDUCER, 1750RPM, 2.71 INPUT HP, 30:1 RATIO, MODEL 943MDT
Concepts Industrial WINSMITH 943 SPEED REDUCER. 1750RPM, 2.71 INPUT HP, 30:1 RATIO, MODEL 943MDT. ITEM REMOVED FROM WORKING ENVIRONMENT. GUARANTEED NOT DOA. THIS ITEM WILL SHIP FREIGHT ONLY. 155 lbs) PLEASE WAIT TO BE INVOICED FOR SHIPPING COST. BUYER PAYS ALL SHIPPING COSTS) Due to our large volume of freight we NO LONGER allow customers to arrange their shipments. Unless approved prior to end of auction. Please contact Linda at 812-623-6100 for approval. Thank you. CE656 SW/155 DS 7/3/14 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on ... morethe item. Due to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. Customer Service Available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours!
|
|
|
BOSTON F73820B9J GEAR BOX, RATIO 20, INPUT HP 5.59, SHAFT 3-1/2" X 1-5/8" (USED)
SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, AND READ THE IMPORTANT INFORMATION ABOUT DESCRIPTION(BELOW) PLEASE CHECK OUT OUR SALE ITEMS IN OUR STORE! BOSTON GEAR BOX CAT: F73820B9J RATIO 20 INPUT HP 5.59 SHAFT 3-1/2" X 1-5/8" USED APPROXIMATE SHIPPING WEIGHT 150 LBS WITH SKID JP/JH IF YOU HAVE ANY QUESTIONS PLEASE CALL US AT 731-635-3167 Please understand that our items are surplus. They come here from factories that have been closed or from other similar situations. Therefore. We do not have first hand knowledge of their history. We do not have the equipment to test many of these items, therefore, we do not know if they are in perfect working condition. We try to be as accurate as possible with our listings. But we are not experts and many of our items are things we know nothing about. There is no eBay condition ... moredescription for surplus items, so please do not rely solely on the standardized condition description from eBay. We use our best judgment on the condition, and include lots of pictures. Please look closely at the pictures. And contact us with any questions or to ask for more detailed pictures if needed before making your decision to purchase. We have no desire to misrepresent. We do honor our 7 day return policy. If you should get an item that does not work. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WE APPRECIATE YOUR BUSINESS. AND WISH TO MEET YOUR NEEDS. ALL PAYMENTS ARE TO BE MADE WITHIN 5 DAYS. IF YOU PURCHASED AN ITEM THAT REQUIRES FREIGHT SHIPPING. SHIPPING ARRANGEMENTS ARE TO ALSO BE MADE WITHIN 5 DAYS. COMBINED SHIPPING IS ALWAYS AVAILABLE. AND THANK YOU FOR SHOPPING WITH US! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
#470 IPTS Gear Drive ICS60 HP .72 Ratio 50:1 5/8" Input 1" Output Shaft
~~~ Southern Online ~~~#470 IPTS Gear Drive ICS60 HP.72 Ratio 50:1 5/8" Input Shaft 1" Output Shaft*CALL US TODAY AND WE CAN ACCEPT YOUR MAJOR CREDIT CARDS DIRECTLY. NO NEED TO PURCHASE THROUGH PAYPAL. 336-245-9099 Please be sure to have the eBay item number and your credit card ready. Untested. But will Warrant! If you have a problem with your purchase. Please Contact us! ~Please view the Pictures for more details~*Unless otherwise noted above. This listing is for one item per purchase. You actually get to see what you are buying with us! SKID-60-470 BUY WITH CONFIDENCE. WE WARRANT OUR ITEMS! See Warranties Link under"Terms of Sale" Still unsure about who to buy from.just view our feed back. Highly recommended! I returned part with no problems!jayb1735 AWSOME! Great price! Great Delivery Charges! Arrived Fast& Immaculate!jimjaxn ... morefast and accurate.the way all of ebay should be.tbrico Fast Shipping. Came as advertised. Thank You!anacandies Item as described- Great Ebayer- Highly Recommended- A+++.vandykemik Great Buy. As described.dynacomllc For Payment Details. Please click here. For freight shipments. Contact us for a quote. Please have ready the following: 1. Business name? 2. Complete shipping address? 3. Contact name and number? 4. Does this location have a loading dock? 5. Any other information? For all other shipping information. Please click here for our shipping details. If you would like to see more information on our warranty. Please click here. To learn more about us. Please click here. For Contact Information. Please click here. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-1472b04cc12-0x107-
|
|
|
#480 IPTS Gear Drive ICS60 HP .72 Ratio 50:1 5/8" Input 1" Output Shaft
~~~ Southern Online ~~~#480 IPTS Gear Drive ICS60 HP.72 Ratio 50:1 5/8" Input Shaft 1" Output Shaft*CALL US TODAY AND WE CAN ACCEPT YOUR MAJOR CREDIT CARDS DIRECTLY. NO NEED TO PURCHASE THROUGH PAYPAL. 336-245-9099 Please be sure to have the eBay item number and your credit card ready. Untested. But will Warrant! If you have a problem with your purchase. Please Contact us! ~Please view the Pictures for more details~*Unless otherwise noted above. This listing is for one item per purchase. You actually get to see what you are buying with us! SKID-60-480 BUY WITH CONFIDENCE. WE WARRANT OUR ITEMS! See Warranties Link under"Terms of Sale" Still unsure about who to buy from.just view our feed back. Highly recommended! I returned part with no problems!jayb1735 AWSOME! Great price! Great Delivery Charges! Arrived Fast& Immaculate!jimjaxn ... morefast and accurate.the way all of ebay should be.tbrico Fast Shipping. Came as advertised. Thank You!anacandies Item as described- Great Ebayer- Highly Recommended- A+++.vandykemik Great Buy. As described.dynacomllc For Payment Details. Please click here. For freight shipments. Contact us for a quote. Please have ready the following: 1. Business name? 2. Complete shipping address? 3. Contact name and number? 4. Does this location have a loading dock? 5. Any other information? For all other shipping information. Please click here for our shipping details. If you would like to see more information on our warranty. Please click here. To learn more about us. Please click here. For Contact Information. Please click here. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-1472b04cc77-0x10f-
|
|
|
WINSMITH 920MDT GEAR REDUCER 1750 INPUT RPM .47 INPUT HP 583:1 RATIO
5/8' INPUT. C FACE MOTOR 1" OUTPUT SHAFT WAS REMOVED FROM A WORKING COMMERCIAL DISHWASHER
|
|
|
Us Electric, Gearbox, 65 Hp, Input rpm 1780, Out rpm 190, Ratio 9.4, Parallel
Gearbox Mfr: US Electric Hp: 65 Input Rpm: 1780 Output Rpm 190 Ratio: 9.4:1 Style: Parallel Frame: 52 Model# DD-047217 Type: GDM Torque: 45.900 lbs.Sq.In Item#35102. Please let me know if you have any questions.
|
|
|
Sumitomo Drive Tech PA079853 Gear Speed Reducer 59:1 50.6 HP 1750 RPM Input
Sumitomo Drive Tech PA079853 Gear Speed Reducer 59:1 50.6 HP 1750 RPM Input THIS GEAR REDUCER/MOTOR DRIVE IS USED BUT IN GOOD CONDITION. THE UNIT HAS A 1.875" SHAFT AND A 4.125" SHAFT. THE UNIT SPINS EASILY WITHOUT CATCHING OR SEIZING. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# PA079853 OVERALL DIMENSIONS: LENGTH: 29" WIDTH: 24" HEIGHT: 22" SHIPPING WEIGHT: 825 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP VIA MOTOR FREIGHT TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA MOTOR FREIGHT UPON REQUEST. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ... moreARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS L
|
|
|
RX-2, BOSTON GEAR RF713-20-B5-J GEAR REDUCER. 20 RATIO. 0.400 INPUT HP.
BOSTON GEAR RF713-20-B5-J GEAR REDUCER. 20 RATIO. 0.400 INPUT HP. Specifications Brand: BOSTON GEAR, Condition: USED. AS-IS" Model: RF713-20-B5-J, Serial: Type: Power Rating: 0.400 INPUT HP. 235 IN-LB OUTPUT TORQUE, 20 RATIO, RATINGS FOR 1.0 SF@ 1750 RPM, Weight: 11 LBS. Category: MOTORS/ GEAR DRIVES, ERC# RX-2, Location: Z-6 MIDDLE, Additional Notes: SHAFT SIZE: 1) 2-1/8" LONG AND 5/8" WIDE AND(1) 1-3/8" LONG AND 1/2" WIDE, Payment. Shipping. All items are shipped out United Parcel Service(UPS) Price is based upon weight and location. We can ship to a PO Box. With US Postal Rates applying. To determine shipping charges there is a UPS Ground Shipping Calculator attached to our auctions. ERC can ship UPS to Canada and any other International location with the buyer being responsible for all customs and International ... morefees applying. Items over UPS weight and size restrictions will be sent via common carrier. The customer is responsible for the freight charge. Unloading of the freight and/or picking up freight at terminal if possible. ERC will work with customer in trying to find the most cost effective way of shipping. ERC does not setup shipping via common carrier Internationally. However, we will load your item via common carrier international with you, as a buyer, setting up shipping. The buyer is responsible for any damages to the item once the item leaves our warehouse. All of our items are packaged in new boxes and are prepared for any conditions the shipping company offers. If you would like a special request for our packaging department. Please let us know so we can fulfill your request. If you need a shipping quote. Please send us a message asking for a shipping quote with the item it pertains to. We will need your destination zip code. If you would like to setup your own shipping or receive your own quote, our zip code is 44094. Customer Service. We pride ourselves on being a leader in customer service. For a better understanding of the product. Please use pictures for best assuran
|
|
|
RX-36, WINSMITH 2CTM GEAR REDUCER. 7.5:1 RATIO. 1.41 INPUT HP. 316 IN-LB TORQUE.
WINSMITH 2CTM GEAR REDUCER. Specifications Brand: WINSMITH, Condition: USED. AS-IS" Model: 2CTM, Serial: B6902-58A, Type: Power Rating: 7.5:1 RATIO. 1800 INPUT RPM, 1.41 INPUT HP, 316 IN-LB OUTPUT TORQUE, Weight: 22 LBS. Category: MOTORS/ GEAR DRIVES, ERC# RX-36, Location: Y-9 MIDDLE, Additional Notes: SHAFT SIZES: 2) 2-1/8" LONG AND 3/4" WIDE, Payment. Shipping. All items are shipped out United Parcel Service(UPS) Price is based upon weight and location. We can ship to a PO Box. With US Postal Rates applying. To determine shipping charges there is a UPS Ground Shipping Calculator attached to our auctions. ERC can ship UPS to Canada and any other International location with the buyer being responsible for all customs and International fees applying. Items over UPS weight and size restrictions will be sent via common carrier. ... moreThe customer is responsible for the freight charge. Unloading of the freight and/or picking up freight at terminal if possible. ERC will work with customer in trying to find the most cost effective way of shipping. ERC does not setup shipping via common carrier Internationally. However, we will load your item via common carrier international with you, as a buyer, setting up shipping. The buyer is responsible for any damages to the item once the item leaves our warehouse. All of our items are packaged in new boxes and are prepared for any conditions the shipping company offers. If you would like a special request for our packaging department. Please let us know so we can fulfill your request. If you need a shipping quote. Please send us a message asking for a shipping quote with the item it pertains to. We will need your destination zip code. If you would like to setup your own shipping or receive your own quote, our zip code is 44094. Customer Service. We pride ourselves on being a leader in customer service. For a better understanding of the product. Please use pictures for best assurance of your buy. We are not responsible for technical specifications or fitment of an item. I
|
|
|
RX-34, WINSMITH 1MCTR GEAR REDUCER. 30 RATIO. 0.32 INPUT HP. 175 LB-IN TORQUE.
WINSMITH 1MCTR GEAR REDUCER. Specifications Brand: WINSMITH, Condition: USED. AS-IS" Model: 1MCTR, Serial: Type: Power Rating: 30 RATIO. 1800 INPUT RPM, 0.32 INPUT HP, 175 LB-IN OUTPUT TORQUE, Weight: 15 LBS. Category: MOTORS/ GEAR DRIVES, ERC# RX-34, Location: Y-9 MIDDLE, Additional Notes: SHAFT SIZES: 2" LONG AND 5/8" WIDE, Payment. Shipping. All items are shipped out United Parcel Service(UPS) Price is based upon weight and location. We can ship to a PO Box. With US Postal Rates applying. To determine shipping charges there is a UPS Ground Shipping Calculator attached to our auctions. ERC can ship UPS to Canada and any other International location with the buyer being responsible for all customs and International fees applying. Items over UPS weight and size restrictions will be sent via common carrier. The customer is responsible ... morefor the freight charge. Unloading of the freight and/or picking up freight at terminal if possible. ERC will work with customer in trying to find the most cost effective way of shipping. ERC does not setup shipping via common carrier Internationally. However, we will load your item via common carrier international with you, as a buyer, setting up shipping. The buyer is responsible for any damages to the item once the item leaves our warehouse. All of our items are packaged in new boxes and are prepared for any conditions the shipping company offers. If you would like a special request for our packaging department. Please let us know so we can fulfill your request. If you need a shipping quote. Please send us a message asking for a shipping quote with the item it pertains to. We will need your destination zip code. If you would like to setup your own shipping or receive your own quote, our zip code is 44094. Customer Service. We pride ourselves on being a leader in customer service. For a better understanding of the product. Please use pictures for best assurance of your buy. We are not responsible for technical specifications or fitment of an item. Items that are bei
|
|
|
BOSTON GEAR FWA721600BSS, INPUT HP .13, RATIO 600:1 REDUCER
BOSTON GEAR FWA721600BSS. INPUT HP.13, RATIO 600:1 REDUCER TOTAL WEIGHT 40 LB BUYER IS RESPONSIBLE FOR ALL SHIPPING/HANDLING CHARGES
|
|
|
Winsmith Speed Reducer 200MWT Date 3-79 Ratio 10.1 Input HP 1.76
Winsmith Speed Reducer Model- 200MWT Date- 3-79 Ratio- 10-1 Part# 320011-2-1 Input HP- 1.76 This is a used item in good working condition.
|
|
|
RX-1014, BOSTON GEAR S732-50-G GEAR REDUCER. 50:1 RATIO. 1.57 INPUT HP. 2080 TRQ
BOSTON GEAR S732-50-G GEAR REDUCER. Specifications Brand: BOSTON GEAR, Condition: USED. AS-IS" Model: CAT# S732-50-G, Serial# Power Rating: 50:1 RATIO. 1.57 INPUT HP, 2080 IN-LB OUTPUT TORQUE, Weight: 72 LBS. Category: MOTORS/ GEAR DRIVES, ERC# RX-1014, Job# 000, Location: Z-4 TOP, Additional Notes: SHAFT SIZE: 2-1/4" LONG AND 7/8" WIDE. INLET: 2" DIAMETER, Payment Shipping All items are shipped out United Postal Service(UPS) Price is based upon weight and location. We can ship to a PO Box. With US Postal rates applying. To determine shipping charges there is a UPS ground shipping calculator attached to our auctions. ERC can ship UPS to Canada and any other International location with the buyer being responsible for all customs and International fees applying. Items over UPS weight and size restrictions will be sent via ... morecommon carrier. The customer is responsible for the freight charge. Unloading of the freight and/or picking up the freight at the terminal if possible. ERC will work with the customer in trying to find the most cost effective way of shipping. ERC does not setup shipping via common carrier Internationally. However, we will load your item via common carrier international with you, as a buyer, setting up shipping. The buyer is responsible for any damages to the item once the item leaves our warhouse. All of our items are packaged in new boxes and are prepared for any conditions the shipping company offers. If you would like a special request for our packaging department, please let us know so we can fulfill your request. If you need a shipping quote. Please send us a message asking for a shipping quote with the item it pertains to. We will need your destination zip code. If you would like to setup your own shipping or receive your own quote, our zip code is 44094. Customer Service We pride ourselves on being a leader in customer service. We have developed positive relationships around the world. If you have an issue with an item. Please contact(800) 372-2408. About Us Here at E
|
|
|
RX-1012, BROWNING 300Q140LR50 GEAR REDUCER. 50:1 RATIO. 1.43 INPUT HP. 1894 TORQ
BROWNING 300Q140LR50 GEAR REDUCER. Specifications Brand: BROWNING, Condition: USED. AS-IS" Model: 300Q140LR50, CAT# Serial# Power Rating: 50:1 RATIO. 1.43 INPUT HP, 1894 IN-LB OUTPUT TORQUE, Weight: 66 LBS. Category: MOTORS/ GEAR DRIVES, ERC# RX-1012, Job# 000, Location: Z-3 TOP, Additional Notes: SHAFT SIZE: 3-1/4" LONG AND 1-1/4" WIDE. INLET: 7/8" DIAMETER, Payment Shipping All items are shipped out United Postal Service(UPS) Price is based upon weight and location. We can ship to a PO Box. With US Postal rates applying. To determine shipping charges there is a UPS ground shipping calculator attached to our auctions. ERC can ship UPS to Canada and any other International location with the buyer being responsible for all customs and International fees applying. Items over UPS weight and size restrictions will be sent ... morevia common carrier. The customer is responsible for the freight charge. Unloading of the freight and/or picking up the freight at the terminal if possible. ERC will work with the customer in trying to find the most cost effective way of shipping. ERC does not setup shipping via common carrier Internationally. However, we will load your item via common carrier international with you, as a buyer, setting up shipping. The buyer is responsible for any damages to the item once the item leaves our warhouse. All of our items are packaged in new boxes and are prepared for any conditions the shipping company offers. If you would like a special request for our packaging department, please let us know so we can fulfill your request. If you need a shipping quote. Please send us a message asking for a shipping quote with the item it pertains to. We will need your destination zip code. If you would like to setup your own shipping or receive your own quote, our zip code is 44094. Customer Service We pride ourselves on being a leader in customer service. We have developed positive relationships around the world. If you have an issue with an item. Please contact(800) 372-2408. About Us Here at
|
|
|
boston gear 700 series motor f710-5-b4-g input hp 530 output torque 88
Greetings to all my customers. Please keep in mind that everything I sell we have a limited supply of or we MAY HAVE ONLY 1. This means if you see something that is a really good deal and you can stock up you should. Because once it is gone then it is gone. Also. Please keep in mind that if there is a problem with an item contact me. I will resolve it to your liking. I have a 100% Satisfaction policy I intend on keeping strong:
|
|
|
GROVE GEAR B1133-2 INPUT HP .052 1750 RPM RATIO 100 GEAR BOX USED
We do honor our 14 day return policy. If you should get an item that does not work, unless otherwise stated in that items description. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WHAT YOU SEE IN THE PICTURES. IS WHAT WE SEND TO YOU! CHECK OUT OUR SALE ITEMS IN OUR STORE! GROVE GEAR REDUCER FLEXALINE B1133-2 INPUT HP.052 RATIO 100 1750 RPM APPROXIMATE SHIPPING WEIGHT 20 LBS USED P-4-8 WE APPRECIATE YOUR BUSINESS. AND WISH TO MEET YOUR NEEDS. PLEASE CALL 731-635-3167 WITH ANY QUESTIONS. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING ... moreOR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, AND READ THE IMPORTANT INFORMATION ABOUT DESCRIPTION BELOW! Please understand that our items are surplus. They come here from factories that have been closed or from other similar situations. Therefore. We do not have first hand knowledge of their history. We do not have the equipment to test many of these items, therefore, we do not know if they are in perfect working condition. We try to be as accurate as possible with our listings. But we are not experts and many of our items are things we know nothing about. There is no eBay condition description for surplus items, so please do not rely solely on the standardized condition description from eBay. We use our best judgement on the condition, and include lots of pictures. Please look closely at the pictures. And contact us with any questions or to ask for more detailed pictures if needed before making your decision to purchase. We have no desire to mispresent. ALL OF OUR SALE/CLEARANCED ITEMS ARE SOLD AS IS. NO RETURNS* ALL PAYMENTS AND FREIGHT SHIPMENTS ARE TO BE MADE WITHIN 5 DAYS. COMBINED SHIPPING IS ALWAYS AVAILABLE. AND THANK YOU FOR SHOPPI
|
|
|
FALK 1030FZ3A GEAR REDUCER, Ratio 71.09 , Input Rpm 1750, 1 HP, SF 2.0
Rebuilt reducer Was sitting on storeroom shelf ready to be installed. Posted with
|
|
|
RX-1021, SUMITOMO H3155 SM-CYCLO. 87:1 RATIO. 3.03 INPUT HP. 1750 RPM. 8790 TRQ.
SUMITOMO H3155 SM-CYCLO. Specifications Brand: SUMITOMO, Condition: USED. AS-IS" Model: H3155, CAT# Serial# D580119, Power Rating: 87:1 RATIO. 3.03 INPUT HP, 1750 RPM, 8790 IN-LB OUTPUT TORQUE, Weight: 94 LBS. Category: MOTORS/ GEAR DRIVES, ERC# RX-1021, Job# 000, Location: Y-13 BOTTOM, Additional Notes: SHAFT SIZE: 1) 3-1/2" LONG AND 1-7/8" WIDE. 1) 1-5/8" LONG AND 7/8" WIDE, Payment Shipping All items are shipped out United Postal Service(UPS) Price is based upon weight and location. We can ship to a PO Box. With US Postal rates applying. To determine shipping charges there is a UPS ground shipping calculator attached to our auctions. ERC can ship UPS to Canada and any other International location with the buyer being responsible for all customs and International fees applying. Items over UPS weight and size restrictions ... morewill be sent via common carrier. The customer is responsible for the freight charge. Unloading of the freight and/or picking up the freight at the terminal if possible. ERC will work with the customer in trying to find the most cost effective way of shipping. ERC does not setup shipping via common carrier Internationally. However, we will load your item via common carrier international with you, as a buyer, setting up shipping. The buyer is responsible for any damages to the item once the item leaves our warhouse. All of our items are packaged in new boxes and are prepared for any conditions the shipping company offers. If you would like a special request for our packaging department, please let us know so we can fulfill your request. If you need a shipping quote. Please send us a message asking for a shipping quote with the item it pertains to. We will need your destination zip code. If you would like to setup your own shipping or receive your own quote, our zip code is 44094. Customer Service We pride ourselves on being a leader in customer service. We have developed positive relationships around the world. If you have an issue with an item. Please contact(800) 372-24
|
|
|
SUMITOMO SM-CYCLO CHH-6140Y-6 INLINE SPEED REDUCER 6:1 RATIO 17.4 INPUT HP
SUMITOMO SM-CYCLO INLINE SPEED REDUCER MODEL No. CHH-6140Y-6 6:1 RATIO- SINGLE REDUCTION 17.4 INPUT HP 1750 RPM OUTPUT TORQUE: 3580 IN-LB INPUT SHAFT: 1-9/16" LONG X 7/8" DIA KEYED OUTPUT SHAFT: 1-7/8" DIA SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS LOCATED YELLOW#13 JD SP
|
|
|
MO-1266, WINSMITH D90 SPEED REDUCER 943MDSR. 30:1 RATIO. 2.71 INPUT HP.
WINSMITH D90 SPEED REDUCER 943MDSR. Specifications Brand: WINSMITH, Condition: USED. AS-IS" Model: 943MDSR, Type: SE, Part# 943MSRS33400EK, Power Rating: 30:1 RATIO. 2.71 INPUT HP, 1750 INPUT RPM, 2304 OUTPUT TORQUE, SER FAC 1, Weight: 126 LBS. Category: MOTORS/ GEAR DRIVES, ERC# MO-1266, Job# 012, Location: Y-8 BOTTOM, Additional Notes: INLET: 2) 2-1/2" 1) 1" Payment Shipping All items are shipped out United Postal Service(UPS) Price is based upon weight and location. We can ship to a PO Box. With US Postal rates applying. To determine shipping charges there is a UPS ground shipping calculator attached to our auctions. ERC can ship UPS to Canada and any other International location with the buyer being responsible for all customs and International fees applying. Items over UPS weight and size restrictions will be sent via ... morecommon carrier. The customer is responsible for the freight charge. Unloading of the freight and/or picking up the freight at the terminal if possible. ERC will work with the customer in trying to find the most cost effective way of shipping. ERC does not setup shipping via common carrier Internationally. However, we will load your item via common carrier international with you, as a buyer, setting up shipping. The buyer is responsible for any damages to the item once the item leaves our warhouse. All of our items are packaged in new boxes and are prepared for any conditions the shipping company offers. If you would like a special request for our packaging department, please let us know so we can fulfill your request. If you need a shipping quote. Please send us a message asking for a shipping quote with the item it pertains to. We will need your destination zip code. If you would like to setup your own shipping or receive your own quote, our zip code is 44094. Customer Service We pride ourselves on being a leader in customer service. We have developed positive relationships around the world. If you have an issue with an item. Please contact(800) 372-2408. About Us Here at Eq
|
|
|
GROVE GEAR BM0226-3 WORM GEAR REDUCER 5:1 RATIO 4.80 INPUT HP 180T MOTOR FRAME
GROVE GEAR BM0226-3 WORM GEAR REDUCER 5:1 RATIO 4.80 INPUT HP 180T MOTOR FRAME CLEAN SURPLUS ITEM COULD BE UNUSED WITH SOME SHELF WEAR SEE PHOTOS_
|
|
|
Winsmith Speed Reducer Gear Ratio 5:1 Input RPM 1800 Input HP 1.68 NWOB used
Winsmith Speed Reducer Gear Ratio 5:1 Input RPM 1800 Input HP 1.68 NWOB used
|
|
|
Grove Gear Division TX-5 Input HP 2.30 5:1 Ratio Warranty Fast Shipping
Grove Gear Division• Model TX-5• Input Hp 2.30• Output Torq 407• Ratio 5 to 1• 1750 RPM Input Buy with confidence with our 14-day hassle free warranty. Fast FedEx Shipping! Check our feedback! Top Customer Support! Call for better pricing! James 574-238-3448 Josh 574-202-7694 International Buyers please contact us for shipping prices and quotes. For next day air or faster shipping please contact us. All items listed used are used please view all pictures and read full description of item. All items come with 14 day warranty unless specified in the listing description. Standard shipping is USPS priority mail or UPS ground. Our shipping deadline is 4:00PM Eastern Time We offer large discounts on multiple item orders please contact us if interested in multiple items! We are a family operated business that puts pride in our quality of product ... moreand customers satisfaction! If you have any questions our concerns about an item please contact us via Ebay or by phone.
|
|
 |