|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: Used Location: Fort Walton Beach, United States Removed from a working machine with normal signs of wear.
Buy It Now
Free Shipping Condition: Used Location: Bethel, United States Used, corporate surplus item. Tested power on.
Buy It Now
Free Shipping Condition: New Location: Eastpointe, United States Ion Collector Kit For Automatic Versa Spray Guns w/Shur-Lok mount kit. Brand new parts factory sealed retail for over 500.00 dollars Please verify fitment ... morebefore buying part# 189491A The ion collector can improve the smoothness and appearance of cured. Powder coatings. It collects ions emitted from the gun’s charging electrode. Instead of allowing them to deposit on the part. This can reduce the rate of. Charge buildup in the powder deposited on the part. Which may reduce. Defects in the cured coating such as“pinholing” and“orange peel” 010202
Buy It Now
$17.50 Shipping Condition: Seller refurbished Location: Berlin, United States We have more than 20 years of experience in the design, manufacture, and installation of finishing systems including powder coating, liquid coating and ... moreelectrocoating. We also have gun cables and guns available.
Buy It Now
$25.00 Shipping Condition: Seller refurbished Location: Berlin, United States
Buy It Now
$17.50 Shipping Condition: Seller refurbished Location: Berlin, United States We also have gun cables and guns available. powder coating, liquid coating and electrocoating. in the design, manufacture, and installation of finishing ... moresystems including. We will palatalize and load truck at no.
Buy It Now
$3.90 Shipping Condition: New Location: Long Beach, United States
Buy It Now
$3.95 Shipping Condition: New Location: Long Beach, United States
Buy It Now
$3.95 Shipping Condition: New Location: Long Beach, United States
Buy It Now
$12.50 Shipping Condition: Seller refurbished Location: Berlin, United States We have more than 20 years of experience in the design, manufacture, and installation of finishing systems including powder coating, liquid coating and ... moreelectrocoating.
Buy It Now
Condition: Seller refurbished Location: Berlin, United States Nordson Surecoat Rack Mount Automatic 10 Gun Powder Coating System. We have more than 20 years of experience in the design, manufacture, and installation ... moreof finishing systems including powder coating, liquid coating and electrocoating.
Buy It Now
Free Shipping Condition: New Location: China Extra long Extension bar of powder coating gun kkun-versa. It fit to nordson econo powder coating gun. it made in China. During this period,we will repair ... moreor replace a defective product or part with a new or refurbished item.
Buy It Now
$19.05 Shipping Condition: New – Open box Location: Hastings, United States
Buy It Now
Free Shipping Condition: Used Location: Saudi Arabia
Buy It Now
$15.70 Shipping Condition: New – Open box Location: Stroudsburg, United States This vintage Nordson Versa Airless Spray Gun is a rare find for any collector or industrial enthusiast. With its sleek silver design and model number ... more152200, this gun is a true piece of industrial history. The accompanying instruction manual adds even more value, making it a complete package for anyone looking to add to their collection or use it for industrial purposes.With tagsOriginal boxGarage stored and box dirtyFrom dads garage. Not tested.
Buy It Now
Condition: New – Open box Location: Wabash, United States
Buy It Now
$55.64 Shipping Condition: Used Location: Findlay, United States This board is used with normal wear, the enclosure does not have a lid. Unit has not been tested since removal. No sales outside of the United States.
Buy It Now
$39.19 Shipping Condition: Used Location: Warren, United States
Buy It Now
$14.50 Shipping Condition: Seller refurbished Location: Belleville, United States Nordson Versa Spray II IPS Automatic Powder Spray Gun - Refurbished. Condition is "Seller refurbished". Shipped with USPS Priority Mail.
Buy It Now
$27.99 Shipping Condition: New – Open box Location: Elizabethtown, United States Model: 142368C 9443, S/N: 7823.
Buy It Now
$54.55 Shipping Condition: Used Location: Waxahachie, United States 2 Nordson Versa Spray II Automatic Manual Powder Coating Gun Controllers & case. Condition is "Used". Shipped with USPS Priority Mail. Works great and ... morenot used a lot
Buy It Now
$78.96 Shipping Condition: Used Location: Clover, United States CESI EX-94. If your item is received in a different condition than stated (DOA, not working properly etc. USED, SOLD AS IS. • Freight, etc. • Local pick ... moreup. ).
Buy It Now
Free Shipping Condition: New Location: China Resistor kit 134376 for Versa Spray II Manual & Automatic Powder Spray Gun. Versa Spray II Resistor kit. All kinds of spare parts you can find in Ailin， ... morewe manufacture powder coating parts for over 14 years.
Buy It Now
$14.00 Shipping Condition: Used Location: Knoxville, United States Graco 236-028 M-1265 Optimiser HVLP Spray Gun 188-758 Air Cap.125"Orifice NIB SPECIFICATION Bullseye Catalog# 42963 Brand: Graco, Model: 236-028, ... moreWeight: 1 lbs 6 oz, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China Flat Nozzle with O-rings. Nordson powder coating gun.
Buy It Now
Free Shipping Condition: New Location: China 141045 4mm Flat-Spray Nozzle with O-rings For Versa-Spray II Automatic Powder Spray Gun. Flat Nozzle with O-rings. Nordson powder coating gun.
Buy It Now
Free Shipping Condition: Used Location: Mound, United States Removed from service for upgrade.
Buy It Now
Free Shipping Condition: Used Location: Mound, United States Nordson Versa Spray Automatic Powder Gun Controller Can be used as a manual gun controller as well. We have a large amount of used powder coating equipment. ... moreCall Rob@ 920-420-8288 for more information.
Buy It Now
$30.57 Shipping Condition: Used Location: Warren, United States Tired of cleaning all your hoppers every time you change colors? W e also have a Nordson Vibratory Box Feeder System. It can be used on most ALL Nordson ... morecarts for Versa Spray Systems as well as Surecoat systems. The system installs quickly. Once installed you can STILL use your hopper. You just can't mount it on the cart unless you put a cover over the feeder box. This system can also be used on pretty much ANY powder coating system that utilizes a fluidizing pick up tube. This allows you to pull powder directly from your 2lb- 55lb+ box of powder. This is the preferred method for small batch powder coaters or any custom coaters that frequently change colors. Color changes are QUICK and EASY… The box feeder does NOT include a cart. But we do have Nordson carts available if you need one. Please contact us for details. The Vibratory Box Feeder System comes COMPLETE with everything you need. System Includes: Fluidizing pick-up tube Pick-up tube mount Box feeder tray w/ s haker motor Control unit adapter& lines For questions or concerns we can be reached at 313.369.2447 or CCPerformance.com. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e695894b5-0x105-
Buy It Now
$30.57 Shipping Condition: Used Location: Warren, United States PD D78 9C1.
Buy It Now
$30.57 Shipping Condition: Used Location: Warren, United States Tired of cleaning all your hoppers every time you change colors? W e also have a Nordson Vibratory Box Feeder System. It can be used on most ALL Nordson ... morecarts for Versa Spray Systems as well as Surecoat systems. The system installs quickly. Once installed you can STILL use your hopper. You just can't mount it on the cart unless you put a cover over the feeder box. This system can also be used on pretty much ANY powder coating system that utilizes a fluidizing pick up tube. This allows you to pull powder directly from your 2lb- 55lb+ box of powder. This is the preferred method for small batch powder coaters or any custom coaters that frequently change colors. Color changes are QUICK and EASY… The box feeder does NOT include a cart. But we do have Nordson carts available if you need one. Please contact us for details. The Vibratory Box Feeder System comes COMPLETE with everything you need. System Includes: Fluidizing pick-up tube Pick-up tube mount Box feeder tray w/ s haker motor Control unit adapter& lines For questions or concerns we can be reached at 313.369.2447 or CCPerformance.com. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e695894b5-0x105-
Buy It Now
$30.57 Shipping Condition: Used Location: Warren, United States PD D78 9C1.
Buy It Now
$30.57 Shipping Condition: Used Location: Warren, United States Tired of cleaning all your hoppers every time you change colors? W e also have a Nordson Vibratory Box Feeder System. It can be used on most ALL Nordson ... morecarts for Versa Spray Systems as well as Surecoat systems. The system installs quickly. Once installed you can STILL use your hopper. You just can't mount it on the cart unless you put a cover over the feeder box. This system can also be used on pretty much ANY powder coating system that utilizes a fluidizing pick up tube. This allows you to pull powder directly from your 2lb- 55lb+ box of powder. This is the preferred method for small batch powder coaters or any custom coaters that frequently change colors. Color changes are QUICK and EASY… The box feeder does NOT include a cart. But we do have Nordson carts available if you need one. Please contact us for details. The Vibratory Box Feeder System comes COMPLETE with everything you need. System Includes: Fluidizing pick-up tube Pick-up tube mount Box feeder tray w/ s haker motor Control unit adapter& lines For questions or concerns we can be reached at 313.369.2447 or CCPerformance.com. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e695894b5-0x105-
Buy It Now
$20.12 Shipping Condition: New – Open box Location: Hastings, United States
Buy It Now
$20.12 Shipping Condition: New – Open box Location: Hastings, United States
Buy It Now
Free Shipping Condition: New Location: China 4.100% interchangeable for the original.
Buy It Now
Condition: Used Location: Twin Lakes, United States
|
|
|
|
Nordson Versa spray 2 powder coater
1 pre-owned Nordson Powder coating outfit: 1- versa spray II controller 1-versa spray II manual gun 1- gun cable and powder hose
|
|
|
Norton Versa Spray II Powder Coat Box-Feed Unit
J Russell Smith INDUSTRIAL SALES INC. Since 1963 602-248-7802*Please See Our Other Listings For All Of Your Finishing Needs* Up for sale is this refurbished NORDSON VERSA SPRAY II powder coat bo x feed control unit with a Versa Spray powder gun. This unit is in excellent working and looking condition. THIS UNIT INCLUDES: New vibratory motor New air lines for pump. Fluidizing tube New fluidizing tube New powder hose New electrode New Gun cable New cross-cut nozzle Proven Performance and Reliability The Vantage manual spray gun is lightweight. Compact, yet exceptionally rugged and reliable. To provide optimum operator comfort and control. While withstanding tough conditions in a typical powder coating production environment. Sophisticated. Yet Easy-to-Use Control Unit The Vantage control unit combines performance features and technology with ... morean easy-to-use operator interface for optimum coating performance over a broad range of application challenges. Familiar pneumatic regulators and gauges enable easy adjustment of operating air pressures. Long-life. Touch-key controls and LED displays for easy adjustment of both gun voltage and micro-amp current limit. Real-time monitoring of voltage or current feedback.
|
|
|
Vibratory Box Feeder-NORDSON Versa Spray II, I, Surecoat Powder Coating Gun/Syst
Tired of cleaning all your hoppers every time you change colors? W e also have a Nordson Vibratory Box Feeder System. It can be used on most ALL Nordson carts for Versa Spray Systems as well as Surecoat systems. The system installs quickly. Once installed you can STILL use your hopper. You just can't mount it on the cart unless you put a cover over the feeder box. This system can also be used on pretty much ANY powder coating system that utilizes a fluidizing pick up tube. This allows you to pull powder directly from your 2lb- 55lb+ box of powder. This is the preferred method for small batch powder coaters or any custom coaters that frequently change colors. Color changes are QUICK and EASY… The box feeder does NOT include a cart. But we do have Nordson carts available if you need one. Please contact us for details. The Vibratory Box ... moreFeeder System comes COMPLETE with everything you need. System Includes: Fluidizing pick-up tube Pick-up tube mount Box feeder tray w/ s haker motor Control unit adapter& lines For questions or concerns we can be reached at 313.369.2447 or CCPerformance.com. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e695894b5-0x105-
|
|
|
Nordson Versa Spray Automatic Powder Gun Controller
Nordson Versa Spray Automatic Powder Gun Controller Can be used as a manual gun controller as well. We have a large amount of used powder coating equipment. Call Rob@ 920-420-8288 for more information.
|
|
|
NORDSON Versa Spray Box Feed Powder Coat Unit
J Russell Smith INDUSTRIAL SALES INC. 602-248-7802-Phone Since 1963*Please see our other listings for all of your finishing needs* Up for sale is this completely refurbished NORDSON Versa Spray Box Feed powder coat unit. This unit is in perfect working and looking order. This unit has NEW: Vibratory Motor. Box Feed Electrical Box. Switch and Cover, Gun Cable Fluid Tube. Powder Hose(20ft) O-Rings in the Pump and Gun, Air Lines.
|
|
|
Nordson powder Versa Spray II Auto Controller Gema Wagner
Reconditioned Nordson Versa Spray II Auto Controller. All electronics and pneumatics set to factory specifications. One year warranty included with cost of unit. Money back guarantee. see us on the web at
|
|
|
Nordson powder Versa Spray 1 Auto Controller, Gema Wagner
Reconditioned Nordson Versa Spray 1 Auto Controller. All electronics and pneumatics set to factory specifications. One year warranty included with cost of unit. Money back guarantee. See us on the web at
|
|
|
Nordson Powder Versa Spray Cable Fed Gun & Cable, Gema, Wagner
Reconditioned Nordson Versa Spray Cable Fed Gun& Cable. Gun has new resistors in it. Also cable has been tested for any shorts. One year warranty included in price. Money back guarantee. See us on the web at www.powderboothparts.com f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f8760acbd-0xfd-
|
|
|
Powder coating equipment Nordson Versa Spray 2 gun and control unit
Nordson Versa Spray 2 powder gun and control unit excellent condition 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f987810c0-0xfd-
|
|
|
Powder Coating equipment - Nordson Versa Spray 2 gun, hopper and control unit
Nordson versa spray 2 manual gun unit and 80 lbs hopper with Versa Spray 2 gun including fan spray tip. Power cable, and complete feed pump
|
|
|
Nordson Versa Spray Automatic Powder Gun Controller with Gun, Stand & Hopper
This listing is for a USED Nordson Versa Spray Powder Coat Controller with gun. Hoses, Stand and hopper This came from a storage auction. Please see pictures of the button on the front, button seems to operate We have not way of testing these units so they are sold as is No refunds Please ASK all questions before bidding/buying We describe auctions to the best of our ability and all items are sold as is unless otherwise stated. Make sure you are buying what you want because we do not offer refunds because you bought the wrong thing. PAYMENT Payment needs to be made within 2 days of auction closing via Paypal or Credit card We accept PayPal with a confirmed PayPal address. SHIPPING Items will either ship UPS this is a big heavy unit. shipping is estimated for the size. If you need an exact shipping please email me at kerri@kandsgraphics.com ... morePlease email through eBay’s Contact Member on the winning page. NO International SHIPPING*
|
|
|
Nordson Versa Spray Powder Coating Electrode and Multiplier
Your bidding on Nordson versa spray replacement parts for the Nordson versa spray Manual Powder Coating Gun. Parts include the Multiplier P/N 132349 complete electrode Assembly for long Handgun. Tested with KV Meter and are in perfect working order. It’s been recently taken out of service. As with all electronics this is sold“as is” If you have any questions please email before bidding.
|
|
|
Automatic powder spray system, Versa II, 6 guns and controls in tower
Nordson Versa II Automatic Powder Spray System. 6 automatic guns Controllers in tower with master controls Lot of air hoses and air manifolds All hoses and cables included. Good working condition. NOTE THAT WE OFFER TWO GUN STANDS in a separate listing. See our listing No. 121170373841for details and pricing Ship in large wood crate. 72" long x about 30" X 30" 650 lbs.
|
|
|
Powder coating equipment- Versa spray misc parts
5 brand new resistors. 3 brand new tips, 2 brand new tubes dielectric grease, 2 used hose connectors and resistor replacement instructions manual for Versa spray gun. Posted with
|
|
|
Nordson Versa Spray Manual Powder Coating System, Gun, Pump ect.
Your bidding on a used but low usage Versa Spray manual powder coating system which includes the controller. Gun w/ extra nozzle& new trigger service kit, inlet air hose, Nordson powder pump with proper fittings and hoses to connect to the controller. Tested and in working condition. As always with electronics it is sold"as is" Includes everything seen in photos. If you have any questions about this item or regarding shipping, please email before bidding. Check out our current and upcoming auctions. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14158b5defc-0x100-
|
|
|
Nordson Versa Spray 2 Powder Coating Electrode, Multiplier and Barrel
You're buying a multiplier(P/N 132349B) along an electrode and new barrel! Used for the Nordson Versa Spray 2 manual powder coating gun/ system. This item also comes with the resistor replacement instructions and dielectric grease(P/N 245733A) As with all electronics this is sold“as is” However it's been t ested with a KV meter and is in perfect working condition. If you have any questions please email before bidding. Please have a look our other current and upcoming auctions!
|
|
|
Nordson Versa Spray 2 box feed Manual Powder Coating Gun & System
This auction has NO RESERVE bid! You're bidding on a Nordson Versa Spray 2 Box Feed Manual System. As you can tell from the photos. It's in excellent condition! This system was used primarily for one offs and touch up's, which is why the condition is so good! The unit has been tested and is working 100% All you need is air and add a box of powder on the tray and your good to go! As with all electronics. It is sold"as is" We have set shipping at a flat rate of $150.00. If it costs less we'll refund you. if it costs more, we will cover the extra! If you have any questions regarding this system. Please email before you bid. Also have a look at our current and upcoming auctions.
|
|
|
Nordson Manual Versa Spray Nozzels, Tips, Sleeve's Extentions etc. LOT
Nordson Versa Spray LOT. Various Nordson new and used nozzels. Tips, adapters, sleeves etc. Please email if you have any questions regarding any of the above items.
|
|
|
Norsdon Versa Spray Manual Powder Coating System & Nordson Hopper
You're bidding on a Nordson Munual Versa Spray System Your bidding on a used but low usage Versa Spray manual powder coating system which includes a Nordson Hopper with Nordson powder pump that was only used once. It's in brand new condition as seen in the photo(P/N 139364F) gun w/ extra nozzle, new trigger service kit& various airlines/hoses. We are also including 2 extra excellent condition gauges. This is a complete set up with all hoses and fittings to get you powder coating like the pro's just add powder! The system has been Tested and is in working condition. As always with electronics it is sold"as is" Includes everything seen in photos. If you have any questions about this item or regarding shipping. Please email before bidding. Check out our current and upcoming auctions.
|
|
|
Nordson Versa Spray 2 (+) Mulitiplier, Resistor, Extension Etc. Powder Coating
Your purchasing a(+) Multiplier(P/N 132733B) Resistor(P/N 132750B) Extension Barrel(P/N 12513) Power Body Inlet(P/N 125612) along with Dielectric grease& applicator(P/N 24573AA) All parts are in excellent working condition. The electronics have all been test and are in working condition. However, as with all used electronics are sold"as is" If you have any questions please email before bidding. Please have a look at our current and upcoming powder coating auctions.
|
|
|
Nordson Versa Spray Manual Gun Body, Multiplier, New Electrode, Resistor Lot
Your purchasing a Nordson Versa Spray 2 powder coating lot. This lot includes the following; Dielect Grease Applicator 245733A(NEW) Mulitiplier 132349B Power Inlet Body 125612 Extension Body 125613(NEW) Resistor 132750B Electrode(NEW) Trigger Service Kit 160104(NEW) This lot also comes with resistor replacement instructions. If you have any questions. Please email before bidding. Items listed above have been tested and are in perfect working order. As with all electronics they're sold"as is" Check back often for current and upcoming auctions.
|
|
|
Nordson Powder Coating Gun Cables Manual & Auto Versa Spray And?
You're bidding on a lot of 4 various Nordson Powder coating gun cables. 1 we know is for an automatic versa spray gun(very long) another for a manual versa spray gun. They're all are in excellent condition and in the photos I've clearly show the cable ends to view. Written on the cables are below; Grey Cords are labelled Nordson CC/ 3/ G and Nordson CC/ 01/ K Black Cords are labelled Nordson CC/ 95/ L and Nordson CC/ 97/ L If you have any questions regarding this auction. Please email. Please have a look at our other current auctions. Thanks for looking.
|
|
|
NORDSON VERSA-SPRAY EXP 100 MANUAL POWDER COATING SYSTEM
YOU ARE LOOKING AT A NORDSON EXP 100 POWDER COATING SYSTEM WITH A VERSA-SPRAY GUN. THIS IS A COMPLETE RUNNING UNIT THAT WAS USED IN MY POWDER COATING SHOP AND WAS FULLY TESTED AND READY TO BE PUT TO WORK INCLUDED IS A BRAND NEW 5# POUND) BOX OF GLOSS BLACK FROM TIGER DRYLAC. THIS UNIT IS DESIGNED TO BE EITHER A WALL UNIT OR MADE MOBILE WITH OUR CUSTOM WELDING CART THAT HOLDS EVERYTHING AND CAN BE MOVED WHEN NOT BEING USED. NORDSON POWDER COATING EQUIPMENT IS MADE IN THE USA AND PARTS ARE READILY AVAILABLE THROUGH YOUR LOCAL NORDSON REP. THEY ALSO HAVE GREAT CUSTOMER SERVICE AND BEING MADE IN THE USA MEANS THAT THE QUALITY IS 2ND TO NONE. THE FOLLOWING WILL BE INCLUDED IN THE SALE: 1 NORDSON EXP 1OO UNIT WITH VERSA SPRAY GUN. 100 PLUS POWDER PUMP. 1 POUND FLUDIZING HOPPER. 12' NORDSON POWDER HOSE. 1 NEW REPLACEMENT GUN RESISTOR. 1 CD WITH ... moreALL NEEDED NORDSON MANUALS AND OTHER USEFUL PC SAFETY AND REGS IN PDF. 1 CD OF POWDER COATING 101/ POWDER COATING MADE EASY THAT IS FULL OF GREAT KNOWLEDGE AND TROUBLESHOOTING TIPS. 1 NORDSON PAPERBACK MANUAL IN A 3 RING BINDER. 70- S STYLE HANGING HOOKS. 1 WATER SEPERATOR FOR YOUR AIR SUPPLY. 1 RELPACEMENT AIR SOLINOID FOR EXP 100 UNIT. BRAND NEW GROUND WIRE WITH CLAMP(FOR GROUNDING PARTS) 1 NEW WELDING CART CONVERTED TO POWDER COATING DOLLY WITH SHELVES FOR HOSES. ECT. PLEASE FEEL FREE TO EMAIL ME WITH ANY QUESTIONS OR CONCERS. CART WILL BE DISASSEMBLED FOR SHIPPING WITH THE INSTRUCTION MANUAL FOR REASSEMBLY. Posted with
|
|
|
Nordson Versa Spray (8) Automatic Powder Gun Controller w/hopper & nozzles
Nordson Versa Spray(8) Automatic Powder Gun Controller w/hopper& nozzles has 8 gun controllers. Nozzles, hopper, tree, hoses let me know if you have any questions 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-144830e0389-0x102-
|
|
|
Versa-Spray® II Automatic Powder Coating Spray Gun. OVER 1/2 OFF!!
Production-proven spray gun for maximum performance and reliability. Features and Benefits. Automatic Feedback Current control ensures consistent. Optimum transfer efficiency. Superior Faraday-cage penetration accommodates wide range of coating requirements. Maximum electrostatic performance delivers highest transfer efficiency. Specially engineered materials used in powder-contact parts minimize wear and impact fusion. Meets all applicable approvals to assure maximum operating safety. Easy-access. Friction-fit powder pathway design makes routine cleaning and maintenance fast and uncomplicated. Largest selection of nozzle choices available in the industry. Optional nozzle extension with electrode cleaning air keeps charging electrode clean for consistent charging efficiency. Optional ion collector device draws excess ions from spraying zone ... morefor enhanced coverage and finish appearance. Specifications. Dimensions. Length(overall) 14 in. 35.56 cm) Height(with gun mount and tube bracket) Shur-Lok mount 5.25 in. 13.33 cm) In-line mount 5.90 in. 14.98 cm) Width. Shur-Lok mount 3.25 in. 8.25 cm) In-line mount 1.50 in(3.81 cm) Weight(without cable) 26 oz(740 g)
|
|
|
NORDSON VERSA SPRAY POWDER COATING CONTROLLER 144917D *DAMAGED CASE*
Item Description CONTROLLER NORDSON Part#144917D Weight:28.61.lbs About Us CNC Salvage. LLC. is an online resource for procuring Industrial Automation Spare Parts, both new and used. Items offered as"new" are generally surplus items from an Industrial Facility that was excess or obsolete and removed from their inventory and sold to CNC Salvage. Items listed as"used" are generally working pulls from a plant decommissioning project. These items are not pre-tested and are shipped"as-is" The goal of CNC Salvage is to be a low cost provider for material that is used or excess and to supply that material quickly and easily to the end user or 3rd party repair organization. hi Returns CNC Salvage. LLC. must be contacted through eBay before sending a unit back for any reason. CNC Salvage must be contacted within 7 days ... moreafter the item has been received. Returned items must be packaged properly and received within 14 days after the end of the auction. CNC Salvage reserves the right to replace the item in kind or refund the purchase price of the item. Refunds will be issued only upon receipt of item in good condition if a replacement if not available. We will make every effort to supply a working replacement! CNC Salvage does not pay for return shipping or refund original shipping. We will not accept returns due to ordering the wrong part number. Please be certain that the part number purchased is correct hi Warranty/Liability You acknowledge your understanding that the items CNC Salvage. LLC displays and sells at this site are surplus and/or previously used. All items displayed at this site are sold AS IS, WHERE IS, and AS DEPICTED, with all faults, defects and imperfections acknowledged and waived by you, and without any warranties of any kind(see DISCLAIMER OF WARRANTIES below) This does not mean the items displayed at and sold through this site do not work. It does mean that CNC Salvage, LLC has not tested the items or assessed their performance or operation, and that CNC Salvage, LLC theref
|
|
|
Nordson powder coating Automatic sure coat versa spray II 16 gun system
This is a Nordson 16 automatic gun powder coating system with main controler and complete cabinet. All the automatic guns are versa spray II and the system comes with all the gun cables all the controlers are Sure Coat controlers. This system came out of a working production line. All controlers and guns operated as they should.
|
|
|
NORDSON POWDER COATING GUN AND HOSE VERSA-SPRAY 132746A
For is a USED NORDSON VERSA SPRAY POWDER COAT COATING SPRAYER GUN& HOSE Part Number 132746A What you see in the pictures is what you will be getting. It came from a manufacturing company that was foreclosed on. PLEASE READ BEFORE YOU BUY. I bought several guns. Cables and other powder coating parts that I will be listing soon. I know nothing about what any of it is or anything about it, so I am selling it like I bought it, AS IS! A lot of the parts that I will be listing will be new parts. But this is a used gun. Lot# 1 Thanks for Looking
|
|
|
Nordson Versa Spray PRX Automatic Powder Gun P/N 148434D
Nordson Versa Spray PRX Automatic Powder Gun P/N 148434D
|
|
|
Nordson Versa Spray II Manual Powder Coating Gun. ITW Gema, Wagner
This is a Reconditioned Nordson Versa Spray II Manual Gun. Controller, Cable, 5lb Hopper with Universal Pump Mount, Pump, Powder Hose, and Tubing. Also included is the Flat Spray Nozzle and the Deflector Style Nozzle. The units come with the following New Parts, 5lb Hopper, Cascade in the Gun, Powder Hose, and Tubing.
|
|
|
Nordson Versa Spray II Automatic 18 Gun Powder Coating System Triggering System
Nordson Versa Spray II Automatic 18 Gun Powder Coating System w/ 18 Versa Spray II Automatic Guns. Triggering System Included. Includes all gun cables All controllers and guns have been tested and are in working condition. We can alter the setup and add more or less guns to the system based on your needs. We have the largest supply of used/refurbished powder coating equipment in North America! Call for information on this or any additional equipment you may be looking for. Shipping available at buyer cost. Packaging and palletizing at no charge. Contact Rob at 920-361-5208 ext. 402 for more information.
|
|
|
Nordson Versa Spray 2 Automatic 9 Gun Powder Coating System, Versa Spray 2 Guns
Nordson Versa Spray II Automatic 9 Gun Powder Coating System w/ 9 Versa Spray II Automatic Guns. Includes all gun cables All controllers and guns have been tested and are in working condition. Optional: Triggering System We can alter the setup and add more or less guns to the system based on your needs. We have the largest supply of used/refurbished powder coating equipment in North America! Call for information on this or any additional equipment you may be looking for. Shipping available at buyer cost. Packaging and palletizing at no charge. Contact Rob at 920-361-5208 ext. 402 for more information.
|
|
|
Nordson SureCoat Automatic 10 Gun Powder Coating System w/ Versa Spray 2 Guns
Nordson Surecoat Automatic 10 Gun Powder Coating System w/ 10 Versa Spray II Automatic Guns. Includes all gun cables All controllers and guns have been tested and are in working condition. Shipping available at buyer cost. Packaging and palletizing at no charge. We have the largest supply of used/refurbished powder coating equipment in North America! Call for information on this or any additional equipment you may be looking for. Contact Rob at 920-361-5208 ext. 402 for more information.
|
|
|
Nordson Surecoat Automatic 14 Gun Powder Coating System w/ Versa Spray II Guns
Nordson Surecoat Automatic 14 Gun Powder Coating System w/ 14 Versa Spray II Automatic Guns. Includes all gun cables All controllers and guns have been tested and are in working condition. We can alter the setup and add more or less guns to the system based on your needs. Shipping available at buyer cost. Packaging and palletizing at no charge. We have the largest supply of used/refurbished powder coating equipment in North America! Call for information on this or any additional equipment you may be looking for. Contact Rob at 920-361-5208 ext. 402 for more information.
|
|
|
Nordson 100 Plus Automatic Powder Coating System w/ 8 Versa Spray Auto Guns
Nordson 100 Plus Automatic Powder Coating Control Cabinet. Includes: 8 Nordson 100 Plus Gun Control Modules, 8 Nordson Versa Spray Automatic Guns, All cables& hoses, Unit has been tested and is fully functional. Shipping available. Call for quotation. Call Rob for more information 9204208288.
|
|
|
nordson (2) versa spray guns, console, powder coating booth with collection
Nordson Powder coating booth. 3phase 220v/440V on collector motor, comes with 2 automatic style Versa-Spray II guns and 2 Versa-Spray II consoles. Guns mount on adjustable arms. Was set up to feed through, opening is 12x18" front of booth is 36"Wx30"H if was opened up to use manually. Was purchased as working unit to use for a job that never materialized, has been in storage for about 5 years. There are some minor things that will need to be done like one of the plastic screws for the mount on one of the guns is broken, one gun is missing the tip(although I believe this may have fallen down inside the collector during tranport) There is some sort of sensor that goes in the back of the cabinet, not sure what it is for, but it was duct taped into the opening(see last 2 pictures) has glass lense maybe some type of photo sensor? ... moreWill load for free, already mounted on a skid.
|
|
|
Nordson Versa Spray II IPS Three-Gauge Control Unit Powder Spray Guns Controller
Nordson Versa Spray II IPS Three-Gauge Control Unit(used) Includes: 1 Nordson Versa Spray II IPS Three-Gauge Control Unit(used) Only Paypal payments accepted Free shipping to the Continental US only
|
|
|
NORDSON POWDER COATING GUN AND HOSE VERSA-SPRAY 133400A
PLEASE NOTE: Our website CMSURPLUS carries products of all kinds and nature mostly aftermarket automotive. Tools, industrial and household items. We always describe the items to the best of ability. If you have any questions contact us, Google. used. has paint on the handle. used. any questions let us know. has gun and hose.
|
|
|
Nordson Versa Sprayer 246152H with Spray Gun NPE-2M- No Reserve
Nordson Versa Sprayer 246152H with Spray Gun NPE-2M- No Reserve Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Nordson Versa Spray II Manual Powder Coat System
Nordson Versa Spray II powder unit with gun cables and power cable just removed from plant Everything seems to work good looks like new parts have been put on it. If you need more information please call Keith at 719-661-9947 g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-1490d826deb-0x110-
|
|
|
Nordson Versa Spray II Manual Powder Coating System with 2 Fluidized Hoppers
THIS IS A NICE NORDSON VERSA SPRAY II GUN COMPLETE WITH 25# AND 50# FLUIDIZING HOPPERS. WE'VE HAD IT AS A BACKUP AND USED IT OCCASIONALLY FOR PRIMER. I JUST HAD IT SERVICED BY THE NORDSON SERVICE CENTER(REPAIR INVOICE IS IN THE PHOTOS) THEY REPLACED A RESISTOR AND SEVERAL SMALL PARTS REPLACED. NEW 16' HOSE PUT ON ABOUT 5 MONTHS AGO. WILL SHIP ON A PALLET IN U.S. ONLY(EXCLUDING ALASKA. HAWAII) FOR ACTUAL FREIGHT NOT TO EXCEED $150. NICE WORKING GUN.
|
|
|
Nordson Versa Spray II Powder Coat System DEMO-VS Kit 185295C with 173125A Gun
Nordson DEMO-VS Part No: 185295C Serial: AA96J20174 Gun P/N 173125A S/N AA86H21789
|
|
|
Nordson Versa Spray II Manual Powder Coating System, Refurbished & Tested!
Nordson Versa Spray II Manual Powder Coating System Includes: Nordson Versa Spray II Controller. Nordson Versa Spray II Manual Gun w/ cable. Item has been refurbished and tested. American Industrial Sales. LLC(AIS) is a complete systems house of new& used Industrial Finishing Systems and home to the world's largest inventory of used Powder Coating and E-coating equipment including overhead conveyors, ovens, washers, etc. We have more than 20 years of experience in the design, manufacture, and installation of finishing systems including powder coating, liquid coating and electrocoating. We offer our customers new systems, refurbished systems, removal, relocation and upgrading services for existing equipment. In our time in business, we have provided our services and systems to a large variety of companies throughout the Northern Hemisphere. ... moreAt AIS, we take into account important factors such as product size, production rates, product handling, energy efficiency, floor space, and budgets in order to provide the fastest and best design layouts, systems, and delivery times in the industry. We pride ourselves in supplying quality equipment at a competitive price with on-time delivery. If you have questions or need additional information on this item or would like to inquire about any other equipment needs you may have please contact Rob at 920-361-5208 ext. 5 for more information.
|
|
|
nordson versa spray ll
nordson verspray ll manual powder coating gun and 30# hopper includes 3 spair pc boards complete and ready for use
|
|
|
Nordson Versa Spray II Powder Coating Unit with Hopper
For sale is a NORDSON VERSASPRAY II MANUAL POWDER UNIT with a HUSKER FINISHING hopper. We refurbished the unit and it checked out OK. This must be out of our shop before the end of the year. Which is why there is no reserve! Shipping is the responsibility of the purchaser. We ship items like this all the time and will assist in setting up shipping and loading. NO CHARGE FOR LOADING! Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! And we offer a large stock of replacement and repair items for most major brands! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end. We reserve the right to end this auction early due to item being listed elsewhere.
|
|
|
Nordson Versa Spray II used hose adapter 134386
Nordson Versa Spray II powder coating gun used hose adaptor. This is for connecting the hose to the gun.
|
|
 |