|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: New Location: Nashville, United States Powder Curing Oven. 4’ x 5' x 7' Powder Coating Spray Booth, Spray Booth, Semi-Downward Draft Exhaust System, and LED Light. - Chamber walls and door ... moreencased with mineral fiber insulation (rated @ 2100F), providing maximum thermal efficiency.
Buy It Now
Condition: New Location: Nashville, United States Circulation Fan. - High temperature circulation fan. - On/Off circulation fan switch. - Powder Curing Oven. - Chamber walls and door encased with mineral ... morefiber insulation (rated @ 2100F), providing maximum thermal efficiency.
Buy It Now
Condition: New Location: Kincaid, United States Light Armor Ovens 2500B for Cerakote and Powder Coat. The Best Oven for Cerakote and Powder Coat. The LA2500B runs optimally on 240V (x2 hots x1 neutral ... morex 1 ground) single phase but can also run on 208V.
Buy It Now
Condition: New Location: Morrisonville, United States Light Armor Ovens 2500B for Cerakote and Powder Coat. The Best Oven for Cerakote and Powder Coat. The LA2500B runs optimally on 240V (x2 hots x1 neutral ... morex 1 ground) single phase but can also run on 208V.
Buy It Now
Condition: New Location: Morrisonville, United States Light Armor Ovens 2500B for Cerakote and Powder Coat. The Best Oven for Cerakote and Powder Coat. The LA5000D runs optimally on 240V (x2 hots x1 neutral ... morex 1 ground) single phase but can also run on 208V.
Buy It Now
Condition: New Location: Morrisonville, United States Light Armor Ovens 2500B for Cerakote and Powder Coat. The Best Oven for Cerakote and Powder Coat. The LA5000LB6 curing oven runs optimally on 240V (x2 ... morehots x1 neutral x 1 ground) single phase but can also run on 208V.
Buy It Now
Condition: New Location: Kincaid, United States Light Armor Ovens 2500B for Cerakote and Powder Coat. The Best Oven for Cerakote and Powder Coat. The LA7500SB curing oven runs optimally on 240V (x2 ... morehots x1 neutral x 1 ground) single phase but can also run on 208V.
Buy It Now
Condition: New Location: Morrisonville, United States Light Armor Ovens 2500B for Cerakote and Powder Coat. The Best Oven for Cerakote and Powder Coat. The LA5000LB curing oven runs optimally on 240V (x2 ... morehots x1 neutral x 1 ground) single phase but can also run on 208V.
Buy It Now
Condition: New Location: Morrisonville, United States Light Armor Ovens 2500B for Cerakote and Powder Coat. The Best Oven for Cerakote and Powder Coat. LA10K6 runs optimally on 240V (x2 hots x1 neutral x ... more1 ground) single phase but can also run on 208V.
Buy It Now
Condition: New Location: Morrisonville, United States Light Armor Ovens 2500B for Cerakote and Powder Coat. The Best Oven for Cerakote and Powder Coat. The LA10K curing oven runs optimally on 240V (x2 hots ... morex1 neutral x 1 ground) single phase but can also run on 208V.
Buy It Now
Condition: New Location: Morrisonville, United States Light Armor Ovens 2500B for Cerakote and Powder Coat. The Best Oven for Cerakote and Powder Coat. LA10K7 runs optimally on 240V (x2 hots x1 neutral x ... more1 ground) single phase but can also run on 208V.
Buy It Now
Condition: Used Location: Berlin, United States AIS Finishing Systems Convection Powder Coating Batch Oven. Walk-In Dry-Off or Cure Oven. (1) Set of Bi-Fold doors on one end. 6” Thick Oven panels. Built ... morein August 2022, All new oven panels, doors, latches, hinges, duct and wiring / schematics.
Buy It Now
Condition: New Location: Kincaid, United States Light Armor Ovens 2500B for Cerakote and Powder Coat. The Best Oven for Cerakote and Powder Coat. The LA7500SB curing oven runs optimally on 240V (x2 ... morehots x1 neutral x 1 ground) single phase but can also run on 208V.
Buy It Now
$5.95 Shipping Condition: New Location: Stone Mountain, United States Powder Coat Oven, Cerakote Oven, Curing Oven (3’x 3’x5’). Condition is New. Local pickup only.
Buy It Now
Free Shipping Condition: New Location: China The sprayed surface after forming can prevent corrosion of a variety of chemical substances and ultraviolet radiation. No special training is required ... moreto use this product. Cured powder coating can be recoated with powder and baked or touched up with paint.
Buy It Now
Condition: New Location: Nashville, United States Circulation Fan. - High temperature circulation fan. - On/Off circulation fan switch. - Powder Curing Oven. - Chamber walls and door encased with mineral ... morefiber insulation (rated @ 2100F), providing maximum thermal efficiency.
Buy It Now
Condition: New Location: Morrisonville, United States Light Armor Ovens 2500B for Cerakote and Powder Coat. The Best Oven for Cerakote and Powder Coat. LA10K7 runs optimally on 240V (x2 hots x1 neutral x ... more1 ground) single phase but can also run on 208V.
Buy It Now
Condition: Used Location: Cuyahoga Falls, United States 4 X 4 X 6 POWDER COAT OVEN THIS IS A NEW POWDER COATING OVEN. THE OUTSIDE DIMENSIONS OF THIS OVEN ARE- 51" X 48" X 7' TALL. THE INSIDE DIMENSIONS ... moreARE- 44" X 44" X 72" TALL. THIS OVEN IS CONTROLLED BY A DIGITAL PID CONTROLLER. THE OVEN'S 3- 5000 WATT BURNERS ARE RAN ON 220 VOLT SINGLE PHASE POWER AND DRAWS 60 AMPS OF POWER. THE OVEN USES TWO 12" FANS TO CIRCULATE AIR ACROSS THE BURNERS. WHICH RESULTS IN FASTER HEATING AND NO HOT SPOTS. THE UNIT ALSO INCLUDES A WINDOW AND ONE 150 WATT LIGHTS TO VIEW THE POWDER CURING. ALL OVENS ARE TESTED BEFORE SHIPPING. THIS OVEN HEATS UP TO 400 DEGREES IN 15 MINUTES. THESE OVENS WILL GO TO 700 DEGREES. wE HAVE BUILT 100'S OF THESE OVENS AND CUSTOMERS SAYING THIS WAS THE BEST INVESTMENT THEY HAVE MADE. PLEASE GIVE ME A CALL BEFORE YOU BUY A CHEAPLY BUILT OVEN FROM THE OTHER OVEN BUILDERS. THIS OVEN FEATURE'S- 1280 DEGREE MINERAL WOOL INSULATION 1- 150 WATT LIGHTS 20 GA. STEEL SHEETING INSIDE 20 GA. GALVANIZED STEEL SHEETING OUTSIDE 1 X 2-1/8 THICK STEEL FRAMING 1- 8X16 TEMPERED GLASS WINDOW DIGITAL PID CONTROLLER( HOLDS THE TEMP WITH IN TWO DEGREES OF SET TEMP DIGITAL TIMER( THE TIMER WILL SHUT DOWN THE ELEMENTS WHEN THE TIME HAS RUN OUT) 3- 5000 WATT BURNERS 3- LIGHTED SWITCHES(1 FOR THE FANS. 1 FOR THE LIGHTS, 1 FOR THE BURNERS) 3- CAMLOCK LATCHES 2- 12" FANS 1- 1/3 HP A.O SMITH MOTOR 4- PILOW BLOCK BEARINGS FREE OPTIONS- GALVANIZED INTERIOR SHEETING COLOR OF TRIM- RED BLACK BLUE 3 PHASE OR SINGLE PHASE POWER CONTROL- LEFT OR RIGHT HINGE- LEFT OR RIGHT BUILT IN TRACK TO ROLL YOUR POWDER COATING RACK INTO THE OVEN( RACKS FOR THE OVEN CAN ALSO BE ORDER UPON YOUR REQUEST. FOR AN ADDITIONAL COST. THERE IS A TWO YEAR WARRANTY ON ALL ELECTRICAL COMPONENTS! THIS OVEN IS BUILT WHEN YOU ORDER. PLEASE ALLOW 2- 4 WEEKS BUILD TIME. A 500.00 DEPOSIT IS REQUIRED WHEN ORDERING. IF YOU HAVE ANY QUESTIONS PLEASE CALL 1-507-728-8550. 9:00AM- 5:00 PM CENTRAL TIME) Please check out are new web site. THANKS FOR LOOKING! jy.RcmdId ViewItemDescV4,Rlo
Buy It Now
Free Shipping Condition: New Location: North Clarendon, United States Built to take the heat, they can withstand temperatures as hot as 600°F. This premium silicone rubber is flexible enough to conform to rough surfaces ... moreand works in both threaded and non-threaded holes.
Buy It Now
Free Shipping Condition: New Location: North Clarendon, United States HTMS green polyester high temp masking tape discs or "dots" are great for keeping powder coat, Cerakote and paint off of mating surfaces, nuts, grounding ... morepoints or anywhere you don't want to coat. Built to take the heat, these tape discs can be left on the part during oven curing up to 400°F for 20 minutes.
Buy It Now
$20.49 Shipping Condition: Used Location: Manitowoc, United States Send through dry off oven at 330 degrees. Paint and then cure in oven at a temperature of 380 degrees. -Start with alkaline wash and rinse twice.
Buy It Now
$500.00 Shipping Condition: Seller refurbished Location: California, United States This system was purchased 2 years ago and probably has 100 hours of use. Requires 220 volt. Message us with your address for shipping quotes. Average ... moreshipping $500.
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States Cure Schedule: 392F for 2-3 minutes as the part starts to gel. Place the parts in the oven at 392F for 2-3 minutes as the part starts to gel. Zinc Rich ... moreEpoxy. Salt Spray Resistance: 3,000+ Hours. Specific Gravity: 2.2.
Buy It Now
$16.25 Shipping Condition: New Location: Dandridge, United States 5LBS Powder Coating Powder Mix Brown 124Comes in reusable 1bs plastic container as pictured. 5 containers in this listing.Polyester powder10 minutes @ ... more400 cureFlows out very goodGreat for decorsPictures show cured and applied before oven.
Buy It Now
$12.45 Shipping Condition: New Location: Dandridge, United States 1LB Powder Coating Powder Mix Brown 124Comes in reusable plastic container as pictured.1 container in this listing.Polyester powder10 minutes @ 400 cureFlows ... moreout very goodGreat for decorsPictures show cured and applied before oven.
Buy It Now
Condition: New Location: Nashville, United States Unit: Batch Curing Oven. Our powder coating ovens are perfect for the professional powder coater or serious hobbyist looking for the best results. The ... moreincluded convection fan ensures the curing chamber has even heating and is designed to prevent powder blow-off which reduces rework.
Buy It Now
Free Shipping Condition: New Location: North Clarendon, United States These heavy duty rotating spinner hooks are the perfect fit for the powder coater, painter, or anyone who needs high quality rotating hooks.
Buy It Now
$7.95 Shipping Condition: New Location: New Lenox, United States RAL 7040 PLSF70134 - Window Gray/Grey Powder Coating Paint 1LB Bag. Ral 7040 Window Gray/Grey PLSF 70134. Cure Schedule: Polyester TGIC’s can be cured ... morein a direct or indirect gas convection oven, an electric oven, or an Infrared.
Buy It Now
Condition: New Location: Fort Wayne, United States 5' x 5' x 6' Powder Coating Oven, Cerakote Curing, Circulation Fan, Made In USA. - Circulation Fan. - High temperature circulation fan. - On/Off Circulation ... moreFan Switch. - Powder Curing Oven. - Chamber walls and door encased with mineral fiber insulation (rated @ 2100F), providing maximum thermal efficiency.
Buy It Now
Free Shipping Condition: New Location: China The sprayed surface after forming can prevent corrosion of a variety of chemical substances and ultraviolet radiation. No special training is required ... moreto use this product. Cured powder coating can be recoated with powder and baked or touched up with paint.
Buy It Now
Free Shipping Condition: Brand New Location: China The sprayed surface after forming can prevent corrosion of a variety of chemical substances and ultraviolet radiation. No special training is required ... moreto use this product. Cured powder coating can be recoated with powder and baked or touched up with paint.
Buy It Now
Free Shipping Condition: New Location: North Clarendon, United States These heavy duty rotating spinner hooks are the perfect fit for the powder coater, painter, or anyone who needs high quality rotating hooks.
Buy It Now
Condition: New Location: Woodburn, United States 6' x 6' x 12' Powder Coating Oven, Cerakote Curing, Circulation Fan, Made In USA. - Circulation Fan. - High temperature circulation fan. - On/Off Circulation ... moreFan Switch. - Powder Curing Oven. - Chamber walls and door encased with mineral fiber insulation (rated @ 2100F), providing maximum thermal efficiency.
Buy It Now
$7.95 Shipping Condition: New Location: New Lenox, United States Application Data: Polyester TGIC’s are to be applied with a corona electrostatic powder spray gun at between 60kv – 100 kv. Cure Schedule: Polyester TGIC’s ... morecan be cured in a direct or indirect gas convection oven, an electric oven, or an Infra red.
Buy It Now
Free Shipping Condition: New Location: North Clarendon, United States HTMS green polyester high temp masking tape discs or "dots" are great for keeping powder coat, Cerakote and paint off of mating surfaces, nuts, grounding ... morepoints or anywhere you don't want to coat. Built to take the heat, these tape discs can be left on the part during oven curing up to 400°F for 20 minutes.
Buy It Now
Condition: New Location: Nashville, United States Powder Coating / Cerakote Oven, Digital Temp, Circulation Fan. Unit: Batch Curing Oven. Our powder coating ovens are perfect for the professional powder ... morecoater or serious hobbyist looking for the best results.
Buy It Now
Free Shipping Condition: New Location: North Clarendon, United States Built to take the heat, these plugs can be left in the part during oven curing up to 600° for 20 minutes. This premium synthetic silicone is flexible ... moreto conform to uneven surfaces and works well in both threaded and non-threaded holes.
Buy It Now
$16.89 Shipping Condition: New Location: Columbia, United States This powder requires a clear coat for the Illusion Effect. Illusion Fusion. Partial Cure: 15 min. Then apply our Super Durable Wet Clear and fully cure.
Buy It Now
Condition: New Location: Nashville, United States Powder Coating / Cerakote Oven, Digital Temp, Circulation Fan. Unit: Batch Curing Oven. Our powder coating ovens are perfect for the professional powder ... morecoater or serious hobbyist looking for the best results.
Buy It Now
Free Shipping Condition: New Location: China Normal 0 7.8 磅 0 2 false false false EN-US ZH-CN X-NONE MicrosoftInternetExplorer4 Product Description: HighLights: Digital display and Higher Electricity ... morethan our Old Model WX-101. Features: WX-958 Manual Powder Coating Equipment is our newest model. Fine coating effects and very stable quality.which is especially suitable for spraying complicated workpiece deep corners with very fine performance. Powder coating applicable: All kinds of powder. Configurations: An manual powder gun with gun cable. Powder hose, rinsing air tube and standard nozzles A kit of Powder Gun Spare Parts A Powder Coating Control Unit A Powder Injector with venturi insert core A Fluidized Powder Hopper A set of Trolley frame Oil-water separator. Air pressure regulating valve, and Grounding wire Technical Data Input Power: 50W Input Power Voltage: 110V-120V AC.220V-230VAC Output power voltage: 0 ~100KV Output Current: 0~150uA Weight of Gun: 480g Length of Gun Cable:4m Stainless Steel Powder Hopper Capacity： 55L Work temperature range: 5 ° C to 40 ° C Payment& Shipping terms Delivery Time: usually 5-9 businessdays Weight:28kgs(Packing with Carton)
Buy It Now
$7.95 Shipping Condition: New Location: New Lenox, United States Normal 0 false false false EN-US X-NONE X-NONE Ral 6024- Traffic Green Cure: 400f/ 10min Gloss: 95% on 60 degree meter. Recommended Mil Thickness: 2.0-3.0 ... moremils. Specific Gravity: 1.26. Theoretical Coverage: 61.0 sq.ft Salt Spray Results: 3000 + hours. Contact us for price breaks on larger quantities and personalized shipping quotes for international orders. 100% virgin powder manufactured in the United States. Powered by On Jul-23-10 at 20:36:13 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
Buy It Now
$16.89 Shipping Condition: New Location: Columbia, United States Illusion Doubloon. This powder requires a clear coat for the Illusion Effect. Partial Cure: 15 min. Then apply our Super Durable Wet Clear and fully cure.
Buy It Now
$7.95 Shipping Condition: New Location: New Lenox, United States RAL 8017 CHOCOLATE BROWN ~ POLYESTER TGIC WEATHER RESISTANT POWDER COATING FOR INTERIOR OR EXTERIOR APPLICATIONS• CURE SCHEDULE = 340F/10 MIN@ PART METAL ... moreTEMPERATURE• GLOSS LEVEL = 85% ON 60 DEGREE METER• RECOMMENDED MIL THICKNESS = 2.0– 3.0 MILS• SPECIFIC GRAVITY = 1.2– 1.8• THEORETICAL COVER0AGE = 51.5 SQ. FT. SALT SPRAY RESULTS = 1.000+ HOURS Contact us for price breaks on larger quantities and personalized shipping quotes on international orders. Powered by On Jul-23-10 at 20:40:41 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
Buy It Now
Free Shipping Condition: New Location: North Clarendon, United States These heavy duty rotating spinner hooks are the perfect fit for the powder coater, painter, or anyone who needs high quality rotating hooks.
Buy It Now
$7.95 Shipping Condition: New Location: New Lenox, United States Polyester TGIC’s are designed for. Cure Schedule: Polyester TGIC’s can be cured in a direct or indirect gas convection oven, an electric oven, or an Infrared. ... moreA combination of any of these ovens is also suitable.
Buy It Now
$16.89 Shipping Condition: New Location: Columbia, United States Illusion Rad Berry. This powder requires a clear coat for the Illusion Effect. Partial Cure: 15 min. Then apply our Super Mirror Clear and fully cure.
Buy It Now
$7.95 Shipping Condition: New Location: New Lenox, United States POWDER COATING PAINT RAL 3004 PURPLE RED 1LB ~ POLYESTER TGIC ~ A WEATHER RESISTANT POWDER COATING FOR EXTERIOR OR INTERIOR APPLICATIONS ~ CURE SCHEDULE ... more400F/10 MIN. P.M.T. ~ GLOSS@ 60 DEGREE METER-80-90% ~ RECOMMENDED MIL THICKNESS- 2.0-3.0 MILS ~ SPECIFIC GRAVITY- 1.48 ~ THEORETICAL COVERAGE@ R.M.T. 130 FT2 ~ SALT SPRAY RESULTS- 1.000 HOURS Powered by On Jul-23-10 at 20:37:25 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
Buy It Now
$7.95 Shipping Condition: New Location: New Lenox, United States PLSS 40187. Patrician Bronze. Application Data: Polyester TGIC’s are to be applied with a corona electrostatic powder spray gun at between 60kv – 100 ... morekv. Cure Schedule: Polyester TGIC’s can be cured in a direct or indirect gas convection oven, an electric oven, or an Infra red.
Buy It Now
$16.89 Shipping Condition: New Location: Columbia, United States This powder requires a clear coat for the Illusion Effect. Partial Cure: 15 min. Then apply our Super Durable Wet Clear and fully cure.
Buy It Now
$7.95 Shipping Condition: New Location: New Lenox, United States RAL 5017 Traffic Blue. Application Data: PLSF20061, Ral 5017 Traffic Blue is to be applied with a corona electrostatic powder spray gun at. Cure Schedule: ... morePLSF20061, Ral 5017 Traffic Blue can be cured in a direct or indirect gas convection oven, an.
Buy It Now
Condition: New Location: Fort Wayne, United States 5' x 6' x 12' Powder Coating Oven, Cerakote Curing, Circulation Fan, Made In USA. - Circulation Fan. - High temperature circulation fan. - On/Off Circulation ... moreFan Switch. - Powder Curing Oven. - Chamber walls and door encased with mineral fiber insulation (rated @ 2100F), providing maximum thermal efficiency.
Buy It Now
$19.95 Shipping Condition: New – Open box Location: Clemmons, United States Plasticolor White is an acid curing, light stable, fast drying Reactive Amino Coating (RAC) with good building properties. Plasticolor White gives a smooth, ... moreknock-proof and hardwearing surface resisting influence from alcohol, water, etc.
Buy It Now
$7.95 Shipping Condition: New Location: New Lenox, United States Cure Schedule: Polyester TGIC’s can be cured in a direct or indirect gas convection oven, an electric oven, or an Infra red. A combination of any of these ... moreovens is also suitable. Polyester TGIC’s are designed for interior or exterior applications.
Buy It Now
Condition: New Location: Fort Wayne, United States 4' x 6' x 8' Powder Coating Oven, Cerakote Curing, Circulation Fan, Made In USA. - Circulation Fan. - High temperature circulation fan. - On/Off Circulation ... moreFan Switch. - Powder Curing Oven. - Chamber walls and door encased with mineral fiber insulation (rated @ 2100F), providing maximum thermal efficiency.
Buy It Now
$7.95 Shipping Condition: New Location: New Lenox, United States RAL 3002 Carmine Red Powder Coating Paint 1 LB Bag. Cure Schedule: Polyester TGIC’s can be cured in a direct or indirect gas convection oven, an electric ... moreoven, or an Infra red. A combination of any of these ovens is also suitable.
Buy It Now
Free Shipping Condition: Brand New Location: China This dual system be used on powder coating production which need frequently and quickly change colors.It's designed use original powder box,minimal ... morecolor change times,Save time. Features-101V The machine be used on powder coating production which need frequently and quickly change colors.It's designed use original powder box.Minimal color change times,Save time. Technical Data Input Voltage：110-120V AC.220-240V AC Frequency：50Hz~60Hz Pneumatic Control voltage: 24V DC Output powder volume: Max. 500g/min Output power voltage: 0~ 100KV adjustable Polarity:Negative Output current: 0-150uA Weight of Powder Coating Gun:480g Powder Gun Cable: 4m Vibrator Motor: 75W Work temperature range: 15°C- 40°C Packing Details: Packing Dimensions: 69cm x 48cm x 59cm Net Weight:40KGS Gross weight:43KGS by carton 58KGS by wooden case Normal 0 7.8 磅 0 2 false false false EN-US ZH-CN X-NONE
Buy It Now
Condition: New Location: Nashville, United States Powder Coating / Cerakote Oven, Digital Temp, Circulation Fan. Unit: Batch Curing Oven. Our powder coating ovens are perfect for the professional powder ... morecoater or serious hobbyist looking for the best results.
Buy It Now
$7.95 Shipping Condition: New Location: New Lenox, United States Ral 9002 Gray White 1 LB. Polyester TGIC’s are designed for interior or exterior applications. Application Data: PLSF70150, RAL 9002 is to be applied ... morewith a corona electrostatic powder spray gun at between.
Buy It Now
Free Shipping Condition: Brand New Location: China The sprayed surface after forming can prevent corrosion of a variety of chemical substances and ultraviolet radiation. No special training is required ... moreto use this product. Cured powder coating can be recoated with powder and baked or touched up with paint.
Buy It Now
Free Shipping Condition: New Location: China The sprayed surface after forming can prevent corrosion of a variety of chemical substances and ultraviolet radiation. No special training is required ... moreto use this product. Cured powder coating can be recoated with powder and baked or touched up with paint.
|
|
|
|
ASM TECHNOLOGY SNAP CURE OVEN IB109
THIS IS A ASM TECHNOLOGY SNAP CURE OVEN MODEL IB109. 240V. DATE 05/95. SERIAL IB1904-10. UNIT LOOKS IN GOOD CONDITION CAME OUT OF A WORKING ENVIRONMENT. =============. Shipping on this item is 350.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item.
|
|
|
Miltec UV Cure Conveyor Oven
We are an LED lighting R&D and manufacturing company north of Boston. We often purchase plastics processing equipment. Refurbish to brand new condition for a specific R&D project and once the project is finished we no longer need the equipment. We paid $6500 for this in 2012. It works perfect. I believe we replaced the lamp. Includes complete instruction manual. Loaded on a pallet for safe shipping. Miltec's SCS P5112(48" long. Is used for curing inks, adhesives, and coatings. This compact and modular unit utilizes ultraviolet light energy to cure or solidify specially formulated materials virtually instantaneously. It features a curing system with a UV lamp delivering up to 400 watts per inch of curing power. A special black pigmented Teflon coating on the conveyor belt assures long belt life. Since the UV light energy emitted ... moreby the UV lamp remains constant. The desired level of cure is achieved through adjustments to the conveyor belt speed setting or through adjustments to the lamp focal length. The variable speed DC motor may be set to deliver belt rates of 0 to 100 feet per minute. The height of the entire conveyor unit can be adjusted to facilitate integration into the setup of your current production line. As the product is deposited on the intake end of the moving conveyor belt. It passes under the UV lamp. Here, the product is held flat to the belt by a vacuum drawn by the blower assembly mounted directly below the belt.
|
|
|
fiber optic heat oven block - SC, FC, ST heat cure or 3m hotmelt connectors
24 Fiber Optic Connector Oven Blocks SC. ST,FC connectors For Epoxy Cure or Hot Melt Connectors 2 units available- listing is for 1 unit
|
|
|
Triad 2000 Model Dentsply Trubyte Dental Visible Light Cure Oven System
SKU: 27803. Triad 2000 Model Dentsply Trubyte Dental Visible Light Cure Oven System. Follow us on Twitter | Like Us on Facebook | Subscribe to our eBay newsletters | Subscribe to our email newsletters Condition Mechanical: Tested- fully functional. Aesthetic: Good used condition; some marks. Scratches, and typical signs of use. Does not include parts. Accessories, or items not shown. Features Includes only items shown: Visible curing light system. Warranty: 30 day return policy. Guaranteed. Specifications Model: 2000. Serial: 1-15260. Power: 115V. 50/60Hz, 2.34. Information about this product: We ship with USPS. FedEx, and several freight carriers. Financing is available with a 24 hour approval period- contact our customer service department at 208-286-1775 or for more information Atlas Resell is the MARKET for used dental equipment. We buy. ... moreSell, consign, and repair dental equipment. Our comprehensive services can help you clear space. Reclaim capital, replace equipment, and repair almost anything dental-related. We can even help you find a technician in your area. Payment: Atlas accepts most types of payments. Including PayPal, wire transfers, credit cards, and checks, within seven days of purchase. PayPal is the easiest way to pay on eBay- contact us if you wish to pay with another method or require more than seven days to pay for your item. Financing: We offer financing! Approval times are currently less than 24 hours. Please contact our customer service and sales department at 208-286-1775 or before the completion of the sale to begin your application. Customer service: We strive for positive feedback in every eBay transaction. Please let us know if there is anything more we can do to ensure the best possible purchasing experience. Communication is paramount in all of our transactions. Feel free to eBay Message us with any questions or concerns. Atlas customer service is available Monday through Friday, 8:00 a.m. to 5:00 p.m. MST. If you have questions about your purchase or have any problems with your
|
|
|
Nordson Select Coat I.R Module in-line Thermal Cure TCM Convection Oven 100"
Manufacture: Nordson. Model Number: TCM Series Oven SC1R2 Type: I.R Module in-line Thermal Cure TCM Convection Oven S/N 71011 Includes Manuals Application Used: Acrylic Coating Ventilation: 600 SCFM, 1.0 IN. Water Very Good Condition Calibrated- Fully Functionall-
|
|
|
Thermal Innovations Corp. Potting Cure Oven MCP Model No. 04-164 Curing Oven
Thermal Innovations Potting Cure Oven MCP Model# 04-164 2004 Vintage Very Clean 600 Volts 3 Phase 60 Hz Full load current: 29.2 Amps. Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Shipping: We can build custom pallets and crates for an extra charge. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communictions is key. We strive to provide ... morea good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13f55e4ec8d-0xf2-
|
|
|
Quartz Heating Element for Cure Oven 12" x 12" 480VAC 4.2kW 9A
Quartz Heating Element for Cure Oven 12" x 12" 480VAC 4.2kW 9A From our inventory. We are selling a Quartz Heating Elements for Cure Oven 12" x 12" 480VAC 4.2kW 9A. Specifications: More Information: Voltage: 480VAC Amperage: 9A Wattage: 4.2kW Ohms: 54Ω Size: 12" x 12" x 3" Overall Element: 12" x 12" x 1 1/8" RR-6-A 15 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 15 lbs. To ... morecalculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Plea
|
|
|
Yield Engineering YES-PB6-2 Polyimide Wafer Vacuum Bake/Cure Oven
Yield Engineering YES-PB6-2 Polyimide Vacuum Bake Oven Comes with what you see in the pictures. If you don't see it. You probably wont get it. Specifications are from a 3rd party and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. This unit came out of service in working condition. It powers up and seems to function. I do not have the expertise to formally test it and Yield Engineering refused to sell me the manual because I am a reseller of equipment. The Unit's Serial Number Tag Reads: Model Number: YES-PB6-2 Serial Number: 88357 Power Requirements: 220 VAC. Single Phase, 50-60 Hz, 25 A, 5400 W Brief Description: High temperature. Air cooled, laminar flow oven. Designed for up to two cassettes of up to 6" wafers. Max. Temp: 450°C. 100 micron dispersion element in the chamber roof ... moreto evenly distribute the preheated nitrogen. ID: 8" W x 21" D x 7" H, For More Pictures Please Click the Following: $100.00 minimum for packaging. Handling, and order processing. Shipping to be determined by destination. If you have any questions please call Michael at 1-866-MHZ-ELEC(1-866-649-3532) Toll Free. Also. Please to view or other auctions! 10/31/12 Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13fb38808cb-0xf9-
|
|
|
Autoclave cure oven
Vacuum Industries Model 2100 Series 1822. Minor signs of wear, nothing missing. AS IS WHERE IS. We will strap, wrap and load for buyer at no additional cost.
|
|
|
Lesco 3sr-6 Ultraviolet Curing Cure Oven W/ Fusion Systems P300 Power Supply
Lesco 3sr-6 ultraviolet curing oven with fusion systems p300 power supply. Unit was removed from service due to line change and has been in storage ever since. Unit was hooked up to power which is 220 single phase. And has gone through over twenty power up and rotational cycles and was run for an hour or so non stop to verify correct operation. Unit works great. It has some resin on it as well as some scratches. The Lesco 3sr-6 is a three station 1-load, 2-rotate and cure, 3-0unload. The cure time can be adjusted from 1 sec. to 60 sec. and the rotation of the part curing fixture can be adjusted from 8 rpm to 60 rpm. It is great for irregular shaped objects 10 or less in height. Bench pictured is not included. It will be the responsibility of the purchaser to arrange and pay for shipping. I will palatalize and load onto a truck for no charge. ... moreFeel free to ask questions.
|
|
|
Ney Thermo-Cure, Dental Oven / Furnace with Temp Gauge, Excellent.
SquareTrade © AP6.0 This well maintained Ney-Barkmeyer Thermocure oven is in excellent condition. Everything including the temperature gauge is in good working order. This was used as a backup unit in a dental lab so it has seen limited use. Plenty of pictures taken for your inspection. Thanks for stopping by. We have been selling medical equipment for the last eight years. We have a good reputation in the Medical and Business Community and we want your business.We will do our best to give you great service with fast shipping. We always welcome your feedback. Please dont hesitate to ask questions and we will answer to the best of our ability. We sell used Medical equipment and so it is our responsibility to insure that you receive an item that conforms to our description. It is your responsibility to have this equipment checked by a ... morecertified Biomedical technician or department and clear all regulatory processes before being put into service. The sale of this item may also be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Southern Medical Brokers LLC is a Medical. Laboratory, and Industrial Equipment reseller. we are located at 428 8th st. Augusta Ga. 30901 and can be reached at 706-513-4644. Thanks for stopping by.
|
|
|
3M HOT MELT TERMINATION 6312 OVEN CURE FIBER OPTIC KIT
READY TO USE- COMES WITH ALL CONNECTORS AND TOOLS IN PICTURES ANY QUESTIONS PLEASE FEEL FREE TO EMAIL Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Ney Thermo-Cure, Dental Oven / Furnace with Temp Gauge 5 degree Gradients 2000 F
This is a Ney-Barkmeyer Thermocure. It has been tested and worked well. It could use a little additional cleaning been sitting in storage awhile. Warm and dry area. I have an entire dental lab. Could make a package deal of all items. Including chaulk, pastes,pigment kits, and chemicals.
|
|
|
Conveyor Powder Coat Paint Cure Oven Dry Off Oven Systems Inc OSI
This is an Oven Systems Inc(OSI) powder coat and paint cure oven made in New Berlin. WI. The overall dimensions are 58 ft long by 12.25 ft wide. There are 3 openings on the oven the first opening is 24.5 inches wide by 57 inches tall, the next opening is 39.5 inches wide by 63” tall, and the third opening is 19.5 inches wide by 68 inches tall. We can have it disassembled on pallets for you. This is in great condition and ready for work! Please feel free to ask any questions or to make an offer!
|
|
|
Dentsply MPA 2000 Post Cure Dental Curing Oven
SKU: 31149. Dentsply MPA 2000 Post Cure Dental Curing Oven. Condition Mechanical: Tested- powered on. Responds to controls, unable to fully test. Aesthetic: Very good used condition; some marks. Scratches, and typical signs of use. Does not include parts. Accessories, or items not shown. Features Includes only items shown: Dental curing oven. Warranty: 30 day return policy. Guaranteed. Specifications Model: MPA 2000. Serial: LT500/467. Power: 110V. 2.8A, 50/60Hz. Information about this product: Curing lights are tested for their ability to turn on and respond to settings. Unable to verify strength of emitted light- may require new bulb for full curing power. Batteries may have some crystalization as a result of age and use- may require replacement. Atlas Resell is the MARKET for used dental equipment. We buy. Sell, consign, and repair dental ... moreequipment. Our comprehensive services can help you clear space. Reclaim capital, replace equipment, and repair almost anything dental-related. We can even help you find a technician in your area. Payment: Atlas accepts most types of payments. Including PayPal, credit cards, and several other methods, within seven days of purchase. PayPal is the easiest way to pay on eBay- contact us if you wish to pay with another method or require more than seven days to pay for your item. Contact us immediately at 208-286-1775 if you have problems completing your payment. Financing: We offer financing! Approval times are currently less than 24 hours. Please contact our customer service and sales department at 208-286-1775 or before the completion of the sale to begin your application. Customer service: We strive for positive feedback in every eBay transaction. Please let us know if there is anything more we can do to ensure the best possible purchasing experience. Communication is paramount in all of our transactions. Feel free to eBay Message us with any questions or concerns. Atlas customer service is available Monday through Friday, 8:00 a.m. to 5:00 p.m. MST. If you have questions
|
|
|
SCS Specialty Coating Systems 2250 IRT OVEN Curing Oven ; 2010 Vintage Cure Oven
SCS Specialty Coating Systems 2250 IRT OVEN Curing Oven NOV-2010 S/N:143005 SCS Presicion IRT is designed to safely and quickly cure a wide variety of coatings using both convection and long-wave infrared(IR) heat sources. This unique method of drying and curing ensures that a wide range of high and low-solvent coatings and adhesives can be cured. With greatly reduced potential for solvent entrapment, bubbling, or blistering. In addition. The combination of convenction and IR heat provides an energy efficient process that is less expensive and faster than many other types of curing systems. The curing system is fully automated with programmable process set-up. The IRT oven utilizes large area filters that offer long life and are easy to replace. Additionaly the system features a full stainless steel process cavity and drip pans for fast and ... moreeasy maintenance. 18" conveyor width. 6 Heated Zones which includes 30" of preheat(2 zones of 15" each) and 126" of Main Area(4 zones 31.5" each) 30.5" of Cooling Length. Overall length is 220" 480 Volts 40 Amps 3 Phase 60 Hz. Buyer is responsible for shipping Product Features and/or Part Number: Pictures are of actual item and are part of the auction description. Shipping: We can build custom pallets and crates for an extra charge. Paypal Confirmed Address: Paypal address must be confirmed and be the same address item is being shipped to. Returns: Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. Issues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products
|
|
|
Pro Cure Light Oven
Pro-Cure light oven. Used but in excellent condition. Perfect for light cured custom trays. Light cured temporaries. TRIAD appliances. This lists for $650 new. Unit works great as shown in fotos. Extra lamp bulbs also available. Just ask.
|
|
|
Explosion proof 225cf Walkin industrial 54KW Despatch Oven dry cure powder-coat
Ebay Listing Form- We have 1000's of Industrial/Laboratory equipment& parts items-See the categories on the left below- Explosion proof 225cf Walkin industrial 54KW Despatch Oven drying curing powder-coat flamable solvent DESCRIPTION: Double door Despatch industrial oven large enough to walk-in. Designed for loading pallets or other forklifted items into. Modified by factory for 500 degree F operation. The explosion proof design allows operation in any hazardous environment and the curing of any material. In a drying mode. It can be operated with the exhaust fan to remove whatever agent is being dried out. In a curing mode it can operate with just circulation and then purge before being opened. CONDITION: We are not actually sure this has ever actually been used. It looks to be in excellent condition. The only thing is that it has ... moresuffered minor cosmetic storage and hanling rash as well having trace surface rust at the bottom where it was sitting. Will demonstrate operating before shipping if you pay the BIN price. Minor cosmetic over splater of a white paint like substance that seems to come off easily. PLEASE look over the pictures carefully. If you don't see it in the pictures. It's probably not included. CA Inventory# 5789 FEATURES: Manufactured by Despatch Industries in the USA, Model# PSC3-17R modified Serial# 154360-L, Explosion Proof so it can drive off and operate with Falamable Explosive fumes. Dual fans/motors 3hp for circulation and 2hp for exhaust. Total motor amps 7.8 480 volts 3-phase Heater amps 65 480 V 3-phase, control voltage 120 vac, 500 degrees F max operating temperature. Air pressure interlock. Door interlock, 255 cubic feet raw interior volume. 173 cf clear volume. interior parts could be removed to allow full 225 cf volume) Forklift valleys, Large Killark Explosion Proof Electrical inclosure w/window and swiches. XJB-163210 SU2 32 x 16 x 10" interior. Partlow MIC 2000 process controller, 100 amp primary power cont
|
|
|
Grieve 333 Industrial Cure Lab Oven 350 Deg. F 6.6KW
Grieve 333 Industrial Cure Lab Oven 350 Deg. F 6.6KW. Inventory#870. DESCRIPTION. The Grieve lab oven is in good condition. It will need to be cleaned before use. There are scratches. Scuffs, and other wear from heavy use. About Us: Our sister company purchased the Corps Of Engineers Building and its contents which are: rock crusher. Soils, asphalt/concrete test labs, lab glass, fumes, test instruments, tensile/compression testers, etc. We are liquidating all. SPECIFICATIONS. Model No: 333 Serial No: 57478 Max. Temp: 350°F Heat Input: 6.6KW 230VAC. 1 Phase, 33A, 60Hz 38" x 36" x 36" approximate inner dimensions 460 lbs. Made in USA SHIPPING INFORMATION. We ship quickly with the US Postal Service. UPS, or FedEx. For freight items, please contact us. We combine shipping. Please wait for an invoice or contact us for a quote. ... morePAYMENT. Please pay within three days through PayPal. Contact us if you cannot pay for the item in full. RETURN POLICY. 30-Day satisfaction guarantee! If you are not satisfied with your purchase. Please contact us first and we will resolve the issue. Our business hours are 8am-4pm Pacific(Some questions may not be answered on weekends) For a refund, send the item back in original condition. Shipping and Handling fees are non-refundable. Buyer pays for return shipping. Thank you.
|
|
|
UVEXS Small Area Cure Ultraviolet Light 300 Watts/Inch UV Curing Oven 15747-6
Questions? Call us: 1-877-328-9236. UVEXS Small Area Cure Ultraviolet Light 300 Watts/Inch UV Curing Oven 15747-6. Manufacturer: Uvexs Model: SAC Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Uvexs Condition: Used. Comes in non-original packaging. This lot is in Good cosmetic condition with minor blemishes from prior use. Mostly old label residues but also some scrapes/scratches in the black finish. Notes: This lot is in Good working condition. The lamp comes on and the Watts/Inch meter gives different readings based on the low/med/high level switch. The low/med/high switch glows in the med and high positions. The shutter/timer/footswitch setup works. As does the manual shutter opening function. The fans work. NO other testing was done. No manuals, cords/cables, or additional items are included ... moreif not listed or shown. Included: 1) Uvexs 16983 Power Supply, 1) Uvexs 15747-6/15646-6 Lamphouse, 1) Kanalflakt K4 Ventilation Blower, 1) Exposure chamber, 1) Foot switch, Specifications: Manufacturer: UVEXS, Model: SAC(Small Area Cure) Compact UV exposure system, Power levels to 300 Watts per Inch(selectable 150. 200, 300WPI) Power supply with controls is separate from lamphouse, Can be controlled remotely via foot switch or PLC, Designed for integration into production equipment, Lamphouse sits on top of chamber, Chamber inside dimensions: 16"W x 12"D x 12.5"H, Requires exhaust ventilation, SKU: O09D007 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa,
|
|
|
1 USED GRIEVE 333 INDUSTRIAL CURE LAB OVEN
Welcome to Canarsky& Daughters. We are here to sell these items. We are looking forward to doing business with you. So have fun browsing and buying. Reasonable offers are always welcomed. SEARCH OUR STORE BY CLICKING HERE! ATTN: Please read all of our updated terms and conditions posted below before bidding. If you have difficulty with these terms. Please write us with your concern. By placing your bid. You accept these terms and agree to abide by them. THIS LOT CONSISTS OF: 1 USED GRIEVE 333 INDUSTRIAL CURE LAB OVEN. HEAT INPUT 6.6 KW. MAX TEMP 350 DEGREES F, 230 VOLT, 33 AMP, 1 PHASE, 60 HZ, FUEL ELECTRIC. ID: 36 INCH WIDE X 38 INCH DEPTH X 39 HIEGHT. OD 78 INCH HIEGHT, 50 INCH WIDE, 43 DEPTH. PLEASE NOTE: THIS ITEM IS VERY LARGE/HEAVY AND MUST BE SHIPPED BY TRUCK, OR OTHER SHIPPING SERVICE, AND/OR IS AVAILABLE FOR LOCAL PICKUP. SHIPPING ... moreMUST BE ARRANGED BY BUYER. WE ARE NOT ABLE TO CALCULATE THE CURRENT COST OF SHIPPING THIS ITEM. PLEASE CHECK WITH YOUR SHIPPING SUPPLIER. BUYER IS RESPONSIBLE FOR ARRANGING FREIGHT, AND NOTIFYING US WHEN PICK UP IS ARRANGED. CONDITION: USED SURPLUS. NO REASONABLE OFFER REFUSED. The approximate shipping weight is 700 lbs. All items are sold"as is" Unless described as"new" above. Items are used. We do not have the facilities to test most of these items. You are only buying the item(s) pictured/described. ALL TECHNICAL QUESTIONS/PROBLEMS SHOULD BE ADDRESSED THROUGH EBAY CHANNELS FOR THE FASTEST POSSIBLE SERVICE. IF SENT TO OUR EMAIL ADDRESS. YOUR CORRESPONDENCE WILL GO TO THE JUNK FOLDER, AND WILL NOT GET ADDRESSED. Please note. IT IS THE BUYER'S RESPONSIBILITY TO DO RESEARCH AND CONFIRM THIS IS THE CORRECT ITEM FOR YOUR NEEDS. We are not experts in these fields and so may not be able to give you the answers you require. We will, however do our best to find the information you request. THANK YOU FOR YOUR COOPERATION. This item must be settled for immediately. All items not settled for in full will be relisted or sold at our discretion an
|
|
|
LARGE INDUSTRIAL OVEN 8' X 3-1/2' X 6-1/2' USED CURE OVEN WORKS GREAT
This is an oven that we just don't need any longer. It's still hooked up so that we can show you it's in good working order. Please email me at cmarino@albioninc.com or call me at 513-403-3590 if you have any questions at all. The oven is in Newnan GA. 30263(just southwest of Atlanta) You can pick it up free of charge, we can load it for you. Or you can contract a shipping company on your own. It's wired 208@29amps with Watlow controllers. Thanks for looking and good luck lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-14505e5ca71-0x107-
|
|
|
FIBERTRON 9550 MULTI-CURE 24 BLOCKS FIBER OPTIC CURING OVEN
Thanks for stopping by and checking out one of our auctions, You are bidding on the following item: FIBERTRON 9550 MULTI-CURE 24 BLOCKS FIBER OPTIC CURING OVEN The condition this item is as follows: THE ITEM YOU ARE BIDDING ON IS A FIBERTRON 9550 MULTI-CURE 24 BLOCKS FIBER OPTIC CURING OVEN. IT IS IN GOOD CONDITION AND IS WORKING. GOOD LUCK AND HAPPY BIDDING! 54326-2. Please read the following bidding: We are a new store so this is a new eBay account. We have been selling item on eBay for the last 11 years and we always strive to ensure that our feedback scores were in the top 99% over the 11 year span. We guarantee that you will be satisfied with our customer service. It is very important to us that we receive positive feedback. If you do have a complaints with anything at all, please contact us so that we can fix the problems for you. We ... moreare a business and our hours of operation are: Monday- Friday. From 9:30 a.m. until 6:00 p.m. Saturday from 9:30 a.m. until 5:30 p.m. ALL TIMES ARE E.S.T. Please direct your questions within our business hours for a fast response. Some payments may take up to 5 days to process Some items may take up to 10 days to ship. A 7% sales tax will be added for all sales in the state of Florida. Taxes and extra fees when shipping out of the country will Not be included in our shipping fees. Feel free to call us@ 813) 866-7296 with questions for the fastest response. Please ask any questions PRIOR to bidding. We assume you are satisfied with the item as well as any and all conditions of the sale. Including shipping fees, when you place a bid. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
PRINTA SYSTEM THERMO CURE 990 SERIES CONVECTION CURING CONVEYOR OVEN DRYER
Printa 990 Series convection curing conveyor oven. An on-board digital readout displays the set temperature and the oven's current temperature. Which can be set up to 400 degrees F in one degree increments. With a variable speed conveyor, the conveyor belt speed control permits belt speed to be set from 0 to 40 fpm. The belt is long lasting and features high temp material. Unit is 110V. This item is used. But in like-new condition. It is mounted on a table with casters. Posted with
|
|
|
Batch Oven natural gas, cure powder coat ,6"thick doors and walls,max temp 800F
this oven was made to order on 1-2012 to be used as a Teflon coat curing oven that cures at 760 f it only has about 30 hours run time. Works great but the project it was ordered for never got to the expected quantities I have a CD the has all the tech info that came with it. ID: 5'HI X 6' L X 6' W. 600.000 btu natural gas. Voltage = 230/3/60 paid 36.000.00 in 2012. Go to pq.com for mor details under truck oven 78-800
|
|
|
Despatch LLC 1-16-3 Thermal Cure Oven, 500°F, Air, Stackable
Despatch Protocol Plus LLC 1-16-3 Stackable Thermal Cure Oven. Max Temperature 500°F, 240V, single phase, 50/60 Hz. Stainless Steel Inside and outside Interior: 15" x 14" x 14" WDH Exterior: 32.5" x 35.5" x 20.75" Overall Programmable Plus Controller Magnehelic Gauge 4 Shelves Not for flammable solvents. Combustible materials, or enclosed containers. PAYMENT OPTIONS: We accept PayPal. Company Checks, All major credit cards, Wire Transfers. Please call(805) 961-4457 or email us at AnacapaEquipment@gmail.com TAXES& FEES: California Sales Tax applies if order within California at 8% Handling charges apply if stated in listing. Your cost is the price of your item. Shipping charge, insurance. And sales tax if applicable. SHIPPING: Item is shipped via freight. Fully insured. You may also use your own carrier ... moreor arrange for pick up. Please call or Email to request a Freight Quote. It takes 1 business day to receive a quote. If quote is requested prior to purchase then item can be shipped in 1-2 business days from receipt of payment. If quote is requested after purchase it may take an extra day. REFUNDS& RETURNS: Items authorized for return must be returned prepaid. Fully insured, packaged carefully, complete, and in original condition. Anacapa Equipment Brokers. Inc. 866 Vereda del Ciervo. Goleta, CA 93117 805 961-4457 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-146be2d6026-0x109-
|
|
|
Nordson ASYMTEK Select Coat I.R Module in-line Thermal Cure TCM Convection Oven
All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work. Only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item. The Item may vary from picture as manufacture may change model appearance. MHZ ELECTRONICS INC. CALL NICK- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL NICK- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL NICK- 1-866-MHZ-ELEC- MHZ ELECTRONICS INC. CALL NICK- 1-866-MHZ-ELEC- Nordson ASYMTEK Select Coat I.R Module in-line Thermal Cure TCM Convection Oven SC1R2 Download Manuals Online and it Comes with Accessories Extra Robot Contol and Gantry Robot(See Pics) comes with what you see in the pictures. If you don't see it. You probably won’t get it. Specifications are from manufacturer and may vary slightly ... moredue to upgrades. Options, or revisions this unit may or may not have. eBay’s description of“USED” and our description of“USED” is different, therefore because eBay requires the filling in of this field, we state as“USED” PLEASE READ OUR“CONDITION” for our description of“USED” Pictures May not reflect actual Part Ordered Manufacture: Nordson. ASYMTEK Model Number: TCM Series Oven SC1R2 Type: I.R Module in-line Thermal Cure TCM Convection Oven Part Number: A-561047. Configuration Number Work Cell: FMA1C5D1SDLZ Application Used: 357 XYLENE. 1B31 Acrylic Coating Ventilation: 600 SCFM. 1.0 IN. Water Retail Price: $59.540.00 Condition: Used. Removed from service in working condition, Untested Select Coat I.R. Module Work Cell Specs Serial Number-BK90105151 Model Number- SC1R2 Configuration Number- FMA1C5D1SDLZ Phase- 3 Volts A.C. 480 Amps- 2 Hertz- 60 Select Coat I.R. Module Specs Serial Number-01504 Machine Configuration- 03 Power Configuration- 07 Volts 3 Phase- 480 Amps- 40 Hertz- 60 Dimensions I.R. Module: Length 122 inches Width- 34 inches Height- 72 inches Dimensions Work Cell: Length 82 inches Width- 48 inches Height- 65 inches Accessories(See Picture
|
|
|
Amphenol 927-100-2105 Multi-Cure Oven
General Product Information Description: U p for bid is a Amphenol 927-100-2105 Multi-Cure Oven. Item only. Pictures are of actual items. Nothing extra will be included aside from what shown. Warranty All hardware components purchased come with a 90 days replacement warranty or Refund. Product4you80 works hard to keep our customers satisfied. Therefore we give our customers a 30 days warranty for replacement or full refund. If you are dissatisfied in any way please contact us to resolve problem. We strive to achieve 100% satisfaction for all of our customers by providing professional and courteous customer service. There is no issue we cannot resolve. Thank you for your time and best of luck in all of your eBay ventures. Local pickup is available. UPS is used for the vast majority of shipments or USPS& FEDEX. There will be an extra cost ... moreon shipments to Hawaii. Alaska and Puerto Rico. We ship within 24 hrs. The delivery time should be between 3-6 business days. For International Shipping: Contact with us for shipping costs. A contact phone number is required for international orders. Duties are typically not charged. If any duties are due upon the item entering your country, the buyer is responsible for them. If you have additional question please feel free to asks: Usually we response within minutes or the same day. Contact us directly using the EBay'Ask Seller A Question" button. Click on the top right corner ASK SELLER A QUESTION. REF 4129(E4) State sales tax will be collected for sales in Texas.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146ca632e06-0x10d-
|
|
|
Ney Barkmeyer Thermo-Cure Dental Lab Oven
Ney Barkmeyer Thermo-Cure Dental Lab Oven THE OVEN IS IN GOOD WORKING CONDITION WITH ONE MONTH WARRANTY
|
|
|
3M 6312 0700-9190 HOT MELT Termination Oven Cure Fiber Optic Kit & Tools
3M Hot Melt fiber optic termination kit w/ extras Model: 0700-9190 Condition: EXCELLENT lightly used condition. Comes to you exactly as pictured with everything pictured including the tools ALL REASONABLE OFFERS CONSIDERED! Buyer pays shipping Check out my other auctions for many other fiber optic tools as I discount shipping on multiple purchases
|
|
|
ProCure Dental Laboratory Lab Curing Light Oven Cure Unit
Works well.
|
|
|
3M HOT MELT TERMINATION 6312 OVEN CURE FIBER OPTIC KIT EXCELLENT CONDITION
This kit is in excellent working condition. Everything pictured you will receive. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-147506b7653-0x111-
|
|
|
Enterra Eclipse Light-Cure Oven
Eclipse Light Cure Oven in excellent condition! Use for your Triad Baseplates. Eclipse Nightguards, Dentures, Crown& Bridge.and more! Only $700
|
|
|
BGK Finishing Infared Cure Oven, Powder Coating Infared Oven, IR Oven
BGK Finishing Infared Oven. 5 Stages. 9 Zones. Automatic Part Detection System. 480 Volt. 3 Phase. FOB: Berlin. WI, Will load on truck. Call for more information 9203615208 x1 Nick
|
|
|
FIBERTRON MODEL 9450 / 9451 MULTI-CURE HEATER / EPOXY CURING OVEN for CONNECTORS
FIBERTRON MODEL 9450/ 9451 MULTI-CURE HEATER/ EPOXY CURING OVEN for CONNECTORS YOU WILL RECEIVE THE ITEM THAT IS PICTURED Fibertron 9450/ 9451 Multi-Cure Heater Model: 9450/9451 120V. 83A, 10W. Dimensions: 7.5" x 6" x 3.25" 20 Port ST/SC. Thermometer not included. D34A
|
|
|
VWR Scientific 1620 Cure Oven, 225°C, 19" x 20" x 19" Interior
Has general signs of normal wear and tear which may include scratches. Scuffs, dirt, sticker residue etc on the exterior casing. PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in description. Temperatures to 225C Interior Dimensions: 19 x 20 x 19 220v. 1 Phase, 60Hz, UNIT IS MISSING POWER PLUG- PLEASE REFER TO PICTURES. Condition: USED. UNTESTED, UNIT IS MISSING POWER PLUG- PLEASE REFER TO PICTURES Estimated Packed Shipping Weight: UNIT WILL SHIP BY FREIGHT OR AVAILABLE FOR LOCAL PICKUP Notice Regarding Freight: Please wait for an invoice with shipping charges. Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details ... moreBelow) Shipping Notice: Additional shipping charges may apply; pending location. Size and weight of the item(s) Lister: DL Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 4:00 pm(PST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday. Email Address: Please Use The eBay Messaging Service, Phone: 408-762-7286, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales
|
|
|
LESCO USED ULTRAVIOLET UV CURE CHAMBER OVEN FEM1020 120 VOLT
This is a ultraviolet cure chamber or UV cure chamber manufactured by LESCO. Custom built with special dimensions: External dimensions: Width 52" Depth 33" Height 35-1/2" Internal work dimension: Width 43" X Depth 28" X Height 33" Model FEM 1020 120 Volt uses 18 bulbs GE F20T12-B which are included. This chamber originally used in computer board manufacturing is still very clean. It has few hours of use. Last real working usage was in 2012. And has been resting on a pallet since then. I will accept purchase offers for consideration. This chamber can be shipped by truck and I will crate it up for shipping if required. Freight cost will be quoted upon request. Best way is UPS Freight. If you have an account you can arrange your own pick-up for delivery. Approximate wt. with a crate 200 lbs. Local pick-up is fine.
|
|
|
Belco Power Coating System 42"W x 60"H Opening W Gas Fired Dryoff,Cure Oven
Belco Power Coating System 42"W x 60"H Opening W Gas Fired Dryoff.Cure Oven Make: Belco, 42" Wide x 60" High Product Opening, Can Handle 7' Long Part, 4-6 FPM, 5 STG Washer W/ RO System SS Housing. CRS Tanks 75"L MFG In 1997, Single Pass Gas Fired Dry Off 57'L, Single Pass Gas Fired Cure Oven 77'L, Manual Booth 27' SS Spray To Waste, 2/4 Manual Openings 2 Nordson Manual Prodigy Guns, Nordson Cartridge Type Spray To Waste Reclaim System 2 Powder Pots Washer Tanks Heated By Natural Gas, Dryer Heated By Natural Gas, Cure Oven Also Heated By Natural Gas Toshiba AC Inverter For Conveyor Control, 3" I Beam 12" CC Trolleys W Stationary Hooks, Unit Under power And In Operation 480 Volt, 3 Phase Asset Located In Indiana You will receive an invoice via email or Ebay for the full amount owed. Including ... moreshipping. Please do not pay until you have received the invoice. Items not paid within 10 days from the end of an auction will be relisted. Payments by check will be held up to 4 days until the check clears. We can ship by LTL. Partial or full, van or flatbed, double drop, or export container. Freight costs are to be quoted at the time of sale. All freight costs are to be paid by the buyer prior to pickup. Please contact a sales representative for a shipping quote. We ship within 5 business days of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs. ship via UPS ground. Freight may be booked with any carrier. But usually goes out on the best available. Extra shipping charges: Lift gate truck- Add $128 Residential Delivery- Add $80 If a rigger. A lift gate truck, or a residential delivery is necessary, please notify us prior to quoting shipping. If buyer chooses to use their own freight. Shipping account, and or carrier, they will be responsible for all scheduling, paperwork, claims, and any damages incurred in transit. Local pickup is always welcome. No handling fees apply on local pickup. Any item not picked up withi
|
|
|
3M 6312 Hot Melt Termination Oven Cure Fiber Optic Kit *Missing Tools*!
3M 6312 Hot Melt Termination Oven Cure Fiber Optic Kit*Missing Tools* Up for sale is a used 3M 6312 Hot Melt Termination Oven Cure Fiber Optic Kit*Missing Tools* Kit is missing most of the tools and accessories. Kit is in excellent condition. Please read Auction Terms below before bidding on item. 45-Day Warranty CG571710 Any questions. Please contact us before you bid/buy! Please note the auction# in your email) Thanks and good luck! NOTICE! Listing is for the item described and the following accessories ONLY: If it's not listed here. It's not included. Qty. 1 3M 6312 Hot Melt Termination Oven Cure Fiber Optic Kit*Missing Tools* 45-Day Warranty. You may be interested in. Notice! Please contact us with any issues BEFORE opening a dispute. We will make every reasonable effort to make things right. Any buyers who open a dispute without ... moremaking any effort to contact us first will be blocked from bidding on our items. Auction Terms: All orders over $100 will have Signature Required added to the shipment. Please message us if you do not wish to have signature required added to your shipment. Buyers are responsible for asking all questions Descriptions may include manufacturer's original specs and serve only as a guideline. Actual specs may be slightly different. If you don't pay using PayPal. Please send an email indicating the method of payment and when payment can be expected. Payment is due within four days of the auctions' end. After four days we will file for an unpaid item dispute unless payment arrangements are made. We ship only to addresses in the United States. We do not ship to any other countries at this time. The Shipping total applies to addresses within the continental United States only. Additional charges for shipments to Hawaii. And Alaska vary, please call or email for a quote. Cascade charges sales tax when shipping to the following states: IN(7.0% IL(6.25% and WI(5.5% Tax is applied to the shipping cost for IN, and WI. If you have a tax exemption we will need to keep a hard
|
|
|
3M Hot Melt Termination Oven Cure Fiber Optic Kit 6150 110v W/ Accessories
Description UP FOR SALE IS THIS ITEM BELOW. I have for sale a 3M Hot Melt Termination Oven Cure Fiber Optic Kit 6150 110v W/ Accessories. Great working condition. Missing a few piec es. Comes with everything shown in pictures. LOOK AT PICTURES FOR INFO! 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14b947dd241-0x10e-
|
|
 |