|
S12S-SCLCL 3M G6M Threading Indexable Boring Bar Carbide Insert MIN BORE 1"
THIS LISTING IS FOR AN INDEXABLE THREADING BORING BAR MODEL: S12S-SCLCL 3M G6M Carbide Insert Min. Bore: 954" OAL: 10.0" Dia: 75" ITEM IS IN GOOD USED WORKING CONDITION We at TECHSURPLUS package everything very carefully to avoid our customers getting their package damaged. Please make sure that this product is what you need and has all the pieces that you need. You are only buying what is pictured. If you have any questions please contact us before bidding or if you would like to pick up this item and save shipping please let us know. We will ship to locations other than the continental US. Please contact me for a shipping quote. Please read the item description carefully and make sure this item will fit your application. You are only buying what is pictured. Thank you for your interest! PLEASE CHECK OUT OTHER ITEMS LISTED ... moreIN OUR STORE.
|
|
|
S10S-NEL-2 Threading Indexable Boring Bar, Carbide Insert, MIN BORE 1" Shank
THIS LISTING IS FOR A INDEXABLE THREADING BORING BAR MODEL: S10S-NEL-2 Carbide Insert Min. Bore: 1.000" OAL: 10.0" Dia: 625" ITEM IS IN GOOD USED WORKING CONDITION We at TECHSURPLUS package everything very carefully to avoid our customers getting their package damaged. Please make sure that this product is what you need and has all the pieces that you need. You are only buying what is pictured. If you have any questions please contact us before bidding or if you would like to pick up this item and save shipping please let us know. We will ship to locations other than the continental US. Please contact me for a shipping quote. Please read the item description carefully and make sure this item will fit your application. You are only buying what is pictured. Thank you for your interest! PLEASE CHECK OUT OTHER ITEMS LISTED IN OUR ... moreSTORE.
|
|
|
1" VALENITE G-TB-180 INDEXABLE THREADING BAR x 14"
1" VALENITE INDEXABLE THREADING BAR PART NO. G-TB-180 14" OVERALL LENGTH. Very good used condition. As pictured. Payment due within 48 hours of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. BB1504 Thanks for looking!
|
|
|
1-1/2" VALENITE PGTBR-173-43 C INDEXABLE THREADING BAR
1-1/2" VALENITE INDEXABLE THREADING BAR PART NO. PGTBR-173-43 C. 8-3/4" OVERALL LENGTH. Good used condition. As pictured. Payment due within 48 hours of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. BB1501 Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146ad082c63-0x111-
|
|
|
top notch threading & grooving bar with 6 new inserts.1 1/4" shank.coolant thru.
has been milled down to.73 to fit a standard toolholder.uses# 3 inserts.will combine shipping.
|
|
|
SNAP TAP CNR 00100 8-16 THREADING BAR/TOOL HOLDER
You are bidding on a snap tap cnr 00100 8-16 threading bar/ tool holder I do not know anything about these tools they were purchased in a storage unit any questions please ask. Please see pictures as they are part of the description I HAVE TRIED TO DO THE BEST RESEARCH TO PROVIDE THE INFORMATION FOR TITLE
|
|
|
VARDEX LATHE THREADING BAR NV 150-5V
VARDEX LATHE THREADING BAR NV 150-5V1-1/2" SHANK12" OAL
|
|
|
KENNAMETAL GROOVING/THREADING LATHE BORING BAR A16-NEL3 NB6
KENNAMETAL GROOVING/THREADING LATHE BORING BAR A16-NEL3 NB61" SHANK.12" OALTHROUGH COOLANT
|
|
|
Kennametal 1/2" Carbide threading grooving Bar lathe 8.0 length (thru coolant)
This is a used Kennametal E08NER2 NK6. Shank 1/2 diameter by 8" total length.
|
|
|
Iscar MIFHR 12.7C-10 Bar for Face & Internal Grooving Undercutting Threading
Westridgetraders585 welcomes you to this listing for this Iscar MIFHR 12.7C-10 bar for face& internal grooving undercutting& threading applications. The item appears to have been lightly used. They carry screw clamped MINCUT inserts into a long pocket. Providing rigid clamping. The tool has coolant holes. Inserts are not included. Please see item pictures. The pictures listed are of the actual item. Please email with any questions. As always we ship same or next business day that payment is received! International bidders please note that items ship to the eBay U.S. Shipping center where they then ship your item to you. We do not ship directly outside the U.S. If that option is not available then the item can not and will not ship outside of the United States. Please research specs + take a look at the pictures before buying. We will ... morebe happy to help. We value our buyers’ feedback and welcome any suggestions you might have on how we could improve our business. Please remember we strive for a FIVE STAR rating from our customers.
|
|
|
USED VALENITE THREADING GROOVING BORING BAR PGTBL 226-43C (2.00"-Shank) TNMC-43
LISTING IS FOR A U SED VALENITE THREADING GROOVING BORING BAR BRAND- VALENITE PART# PGTBL 226-43C SHANK- 2.00" OAL- 8.375" BAR WAS SHORTENED) MINIMUM BORE- 2.285" MAX BORE- 2.535" USES INSERTS- TNMC-43(NOT INCLUDED) CONDITION- GO OD USED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT ... moreMUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WIT
|
|
|
ISCAR Boring/Threading Bar
SIL 0500 M16. 1/2" UN ER 16(2) 18. 3#250. inserts. Wrench. Use two times.
|
|
|
Kennametal S20-NEL-3 Internal Top-Notch Boring Bar 1.25 Shank Grooving/Threading
The listing price is for 1 used Boring Bar. Original Packaging or Containers May Not Be Included Offers& eMails: I will respond to all Offers and Email Messages Monday through Friday until 2:00pm Central Time. We are closed Weekends& Holidays. Offers expire within 48 hours. So if an offer is made after 2:00pm on Friday, it will expire before I am able to respond. PayPal: We accept instant PayPal payment or credit/debit card through PayPal. Payment in full is expected within 3 days after purchase or product availability will not be guaranteed after 5 days. All orders will be processed within 3-5 business days. Payments received Thursdays after 2pm Central Time and Fridays. Weekends and Holidays will be processed on the next available business day. Item Information: Some items sold may have customer engravings on tools. But this does ... morenot affect the quality of the tool. Some pictures may show other items, but only the items described are included(i.e. carbide inserts, rulers,original packing, tools, etc. If the item is listed as"Seller Refurbished" or"Regrind" please be aware that exact dimensions of the tool may have changed in the grinding process and for special orders. Please ask questions before buying if this is a concern.From time to time, items have been misplaced or put back in use. We apologize for this in advance and will refund your money promptly if this happens. Refunds/Exchanges: We offer a 14-day Money Back Guarantee. Any items needed returned will receive a full refund(or if you prefer an exchange) And must be in the condition it was sold. Please advise us of any problems with purchases before returning or leaving feedback. We are here to make sure that you are a happy customer. We will pay the postage for all returns. Sales Tax: Please be aware that our company has a Physical Presence(Nexus) in AL. AZ, CA, CO, CT, FL, GA, IA, KS, KY, LA, MA, MI, MN, MS, MO, NY, NC, ND, OH, SC, TN, TX, VT, VA, WA and is required by law to collect and remit sales tax for all on-line sales
|
|
|
Kennametal A16-NEL-3 Internal Top-Notch Boring Bar 1" Shank Grooving/Threading
The listing price is for 1 Used Boring Bar. Original Packaging or Containers May Not Be Included Offers& eMails: I will respond to all Offers and Email Messages Monday through Friday until 2:00pm Central Time. We are closed Weekends& Holidays. Offers expire within 48 hours. So if an offer is made after 2:00pm on Friday, it will expire before I am able to respond. PayPal: We accept instant PayPal payment or credit/debit card through PayPal. Payment in full is expected within 3 days after purchase or product availability will not be guaranteed after 5 days. All orders will be processed within 3-5 business days. Payments received Thursdays after 2pm Central Time and Fridays. Weekends and Holidays will be processed on the next available business day. Item Information: Some items sold may have customer engravings on tools. But this does ... morenot affect the quality of the tool. Some pictures may show other items, but only the items described are included(i.e. carbide inserts, rulers,original packing, tools, etc. If the item is listed as"Seller Refurbished" or"Regrind" please be aware that exact dimensions of the tool may have changed in the grinding process and for special orders. Please ask questions before buying if this is a concern.From time to time, items have been misplaced or put back in use. We apologize for this in advance and will refund your money promptly if this happens. Refunds/Exchanges: We offer a 14-day Money Back Guarantee. Any items needed returned will receive a full refund(or if you prefer an exchange) And must be in the condition it was sold. Please advise us of any problems with purchases before returning or leaving feedback. We are here to make sure that you are a happy customer. We will pay the postage for all returns. Sales Tax: Please be aware that our company has a Physical Presence(Nexus) in AL. AZ, CA, CO, CT, FL, GA, IA, KS, KY, LA, MA, MI, MN, MS, MO, NY, NC, ND, OH, SC, TN, TX, VT, VA, WA and is required by law to collect and remit sales tax for all on-line sales
|
|
|
KENNAMETAL BORING THREADING BAR 3/8"- 5/8" DIAMETER A06 SCLPR2 TD2-10
KENNAMETAL BORING BAR 3/8" DIAMETER A06 SCLPR2 QTY2 CMC THREADING BAR 5/8" DIAMETER NO NAME 1/2" BORING BAR THANK YOU FOR LOOKING. FREE SHIPPING. 14 DAY RETURN. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-146f74248c5-0x107-
|
|
|
CIRCLE MACHINE THREADING GROOVING BAR 3/8 & 1/4 TD2-8
CIRCLE MACHINE THREADING GROOVING BAR 3/8& 1/4 THANK YOU FOR LOOKING. FREE SHIPPING. 14 DAY RETURN.
|
|
|
snap tap threading bar 1/2"
snap tap threading bar 1/2" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-146feba8064-0x11f-
|
|
|
Boring Threading Bar 1/2" Holder 1/4" Mini Lathe Tool Bit Machinist Gunsmith Lot
Ebay Base This auction is for a boring. Threading bar in 1/2" shank. This holds 1/4" square shank lathe bits. Comes with 6 cobalt alloy HSS bits. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
|
|
|
Nice! GHIL 15.9-2 Groove Grooving Threading Boring Bar W/ 5/8" Shank
Welcome to ThePlaceToBuy1984! Call Us@ 909-544-8882 The Item You Are Bidding On Is a Boring Bar in EXCELLENT Condition. Item Features& Specifications: Model# GHIL 15.9-2 Current Boring Width: 9/16" Shank: 5/8" Overall Length: 6" Item Comes Exactly as Shown in Pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive 30% discount per item. This Will be Final on all Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction.
|
|
|
NICE ! VALENITE GTB-075 THREADING BORING BAR + INSERTS
NICE! VALENITE GTB-075 THREADING BORING BAR + INSERTS Shank: 3/4" Current Bore: 720" OAL: 6" Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
|
KENNAMETAL LATHE BORING BAR A24-NEL3 GROOVING/THREADING
KENNAMETAL LATHE BORING BAR A24-NEL3 GROOVING/THREADING- 1-3/4" SHANK- 11" OAL
|
|
|
THREADING Kennametal Top Notch Lathe Boring Bar Tool Holder Carbide inserts
Item. Carbide Lathe Internal Boring grooving and Thread Cutting toolholder Manufacturer. Kennametal Model. 327412 F3 Size. Not sure what model insert it uses but it is a LH Left Hand and the distance from the bottom of the insert to the bottom edge of the clamp when it is all the way down measures about.364" guessing it takes inserts that are about 13/32" or so tall Shank. Someone modified it so you can put this in to a tool holder that has a 1.5" diameter hole so you can bore with it. The shank is 2.5" Long The widest part of the holder measures 1" x 1.987" wide It is 6" Overall Length The Hold down clamp is a type CM-73 Condition. Nice used. No inserts are with it We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the ... moretime period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and t
|
|
|
Sandvik Coromant R166.OKF-D10-D1016-2B Threading Boring Bar 10@6362
Sandvik Coromant R166.OKF-D10-D1016-2B Threading Boring Bar 10@6362 Description Sandvik Coromant R166.OKF-D10-D1016-2B Threading Boring Bar This threading boring bar carries small inserts for threading inside diameters. Condition: Very good used. Works well. This item is in very good condition and shows light normal use wear. Yellow plastic box shows dirt. Please view all photos above. Comes as shown. Note: No local pick up. PLEASE READ BEFORE BIDDING SHIPPING We ship to PAYPAL ADDRESSES within the UNITED STATES. Please be sure the address in your PayPal account is correct PRIOR to bidding. We will not be responsible for changing the package destination once item has left our shipping department. Our items are shipped via UPS. Please DO NOT ask us to use another service. No PO. FPO, APO, or PMB Boxes please* For the protection of both the ... morebuyer and seller. We require an adult signature. If you have any concerns please email us before placing a bid. PAYMENT Payment is required in full via PAYPAL within 7 days of the end of the auction. Sales tax applies for local and shipped purchases in the state of Arizona. TERMS of SALE All auction pictures are of the actual item or items for purchase and are in good working order. Unless otherwise stated. Most of our auctions start at $.99 with no reserve. We stand behind our products. If for some reason you have an issue with the item you have received, please email us. We offer a 100% money back guarantee. Please contact us within three(3) days with any issues. All returns require an inspection to verify the reported issue. Items must be returned in the same condition that they were received. We require confirmed return delivery on any returned item. If the item was damaged in shipping, please notify us immediately and we will assist in filing a claim. Our goal is to have a smooth transaction with our customers. Satisfied with their purchase. Please contact us with any issues before you leave a negative or neutral feedback. Once the transaction is completed we will l
|
|
|
USED ISCAR THREADING BAR SO612-LSER2 4-3/8" X 3/4" SHANK 115
YOU ARE BIDDING ON ONE USED ISCAR THREADING BAR SO612-LSER2 4-3/8" X 3/4" SHANK NNECK IS.360 DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
USED KENNAMETAL THREADING BAR ND6 A16-NEL3 12" X 1" SHANK COOLANT 102
YOU ARE BIDDING ON ONE USED KENNAMETAL THREADING- GROOVING BAR ND6 A16-NEL3 12" X 1" SHANK COOLANT TOPNOTCH EXCELLANT DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VARDEX LATHE THREADING/GROOVING BAR AVR 125-3
VARDEX LATHE THREADING/GROOVING BAR AVR 125-31-1/4" SHANK 10" OAL
|
|
|
EXTERNAL (OUTSIDE) THREADING BAR
EXTERNAL(OUTSIDE) THREADING BAR 3/4 SHANKS VERY GOOD CONDITION
|
|
|
Boring Threading Carbide Insert Holder Bar 1/2 Lathe Tool Machinist Gunsmith Lot
Ebay Base This auction is for a carbide insert holder boring bar in 1/2" shank x 6" long. The bar is unmarked. Model number and insert size are unknown. The positive triangle inserts measure 39/64" along the sides x 1/8" thick. The inserts are used but some still have unused or resharpened corners. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction 1" shank size. Allen wrench is also included. our primary focus. Only the best of the best tools, that a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most ... morecost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
|
|
|
KENNAMETAL THREADING & GROOVING INDEXABLE BORING BAR S10-NEL2 W/ INSERTS
Kennametal Threading& Grooving Indexable Boring Bar Model S10-NEL2 Shank Measures 5/8" Diameter x 7" Overall Length Includes(2) Unused Solid Carbide Inserts No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined rate you must wait to be invoiced by us- do NOT pay eBay auction end ... morenotice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
S16T-MTHOR-3-C THREADING THREAD BORING BAR W/ 1" SHANK & 24 INSERTS
Country of Origin: U.S.A Model# S16T-MTHOR-3-C Condition: EXCELLENT Specifications: Shank: 1" Overall Length: 12" Comes as shown in pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive a 30% discount per item. This Only Applies To Tooling Items with a Total Gross Weight of Under 100 Lbs. Machines are Not Included in this Offer. This Will be Final on All Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction.
|
|
|
VALENITE NVRC050-3 INDEXABLE COOLANT FED BORING THREADING BAR 5/8"
Make: Valenite Country of Origin: U.S.A. Model# NVRC050-3 Condition: GREAT Specifications: Current Boring Diameter: 5/8" Shank: 3/4" Overall Length: 5-1/2" Comes as shown in pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive a 30% discount per item. This Only Applies To Tooling Items with a Total Gross Weight of Under 100 Lbs. Machines are Not Included in this Offer. This Will be Final on All Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction.
|
|
|
SANDVIK COROMANT T-MAX HEAVY DUTY INDEXABLE THREADING BORING BAR 1-1/4" SHANK
Sandvik Coromant T-Max Heavy Duty Indexable Boring Bar Model LXXCO 20 3 Threading Measures 1-1/4" Diameter x 7-1/4" Length No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
phase 2 dxa knurling toolholder with a top notch threading bar with 5 new insert
toolholder is new.kennametal top notch is used but coolant thru.comes with 5 new threaders.will combine shipping. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1484cff8179-0x115-
|
|
|
Kennametal S12-NER2 Internal Top-Notch Boring Bar 3/4" Shank Grooving/Threading
USED S12-NER2 KENNAMETAL INTERNAL GROOVING BAR IN GOOD CONDITION ABOUT 10 INCHES LONG
|
|
|
Kennametal S16-NER3 Inserted Threading/Grooving Bar
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Kennametal S16-NER3 Inserted Threading/Grooving Bar* Up for sale is(1) Kennametal S16-NER3 Inserted Top Notch Threading/Grooving Bar* Condition = Used/Very Good. Some overall surface rust and clearance grinds on end* Bar Diameter = 1.00" Height across flats = 0.950" Width across flats = 0.88" Overall Length = 5 3/8" It's been cut-off. See photos) Min. bore diameter = 1.375" Takes NG-3R gage inserts( insert shown is included) Approximate Shipping Weight = 3- 4 lbs. 2104# See our“Standard Policies” page for any questions about International Sales. Shipping, Insurance, Sales Tax, Returns, and Feedback.
|
|
|
VARDEX AVRC 125 5 1 1/4" THREADING BORING BAR TOOL HOLDER CNC LATHE COOLANT THRU
YOU ARE PURCHASING THE PICTURED VARDEX BORING BAR. IT IS USED. INSERT POCKET IS 100% INTACT. IT IS LABELED: AVRC 125- 5 PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES! I SHIP(95% OR MORE) OF MY LISTINGS SAME DAY AS PAID IF PAID BY 3:00 P.M. EST. IF YOU MUST HAVE YOUR ITEMS SHIPPED SAME DAY PLEASE EMAIL OR CONTACT ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. I WILL COMBINE SHIPPING. I WILL SHIP WORLDWIDE. THANK YOU! LL On Jun-25-14 at 14:12:07 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
TOP NOTCH CARBIDE INSERT 1/2" LATHE THREADING GROOVING BAR KENNAMETAL A08-NER1
good used indexable carbide insert threading and grooving bar Kennametal A08-NER1 1/2" x 4" long holds Top Notch insert slight edge wear but clamps tight please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
STELLRAM 1in INDEX-ABLE INSERT THREADING BAR LEFT HAND
STELLRAM 1in INDEX-ABLE INSERT THREADING BAR LEFT HAND COMES WITH ONE INSERT AND SEAT NO SEAT DAMAGE LIKE NEW. I AM SELLING OFF A LOT OF TOOLING FROM MY MACHINE SHOP IN THE WAY OF CUTTING TOOLS ECT. DRILLS. END MILLS, REAMERS, AS JOB LOTS TOO MUCH TO LIST SEPARATELY IN MOST CASES. ALL ARE IN GOOD USABLE CONDITION AND I WILL DO MY BEST TO DESCRIBE ANY IMPERFECTION. I ALWAYS COMBINE SHIPPING AND SHIP USPS.
|
|
|
Hardinge Threading Tool gage bar k type
Hardinge Threading Tool gage bar k type
|
|
|
VALENITE LATHE GROOVING/THREADING BAR GTB-075 STK 815
VALENITE LATHE GROOVING/THREADING BAR GTB-075 STK 815- 3/4" SHANK- 6" OAL
|
|
|
NICE 1" KENNAMETAL TOP NOTCH THREADING GROOVING BORING BAR A16-NER3
1" KENNAMETAL TOP NOTCH BORING BAR PART NO. A16-NER3 12" OVERALL LENGTH. THRU COOLANT. Very good used condition. As pictured. Payment due within 48 hours of purchase. Check. M/o, and PayPal accepted. FREE USPS Priority Mail shipping with tracking. STOCK#TN277 Thanks for looking!
|
|
|
CLEAN! RIDGID MODEL 535 PIPE / BAR THREADING MACHINE w/ BASE
Call Us Today! 626.330.4647| CLEAN! RIDGID MODEL 535 PIPE/ BAR THREADING MACHINE w/ BASE, IN GREAT WORKING CONDITION. 115 VOLTS 8 AMPS 14.000 RPM OVERALL MEASUREMENTS: 60" x 26" x 51" MEASUREMENTS OF PIPE THREADER WITHOUT BASE: 42" x 19" x 15" WEIGHT: 567 LBS(INLUDES BASE. PLEASE CALL FOR WEIGHT MINUS BASE) Copyright 2014 1 Machinery Sales.com | All Rights Reserved, Descriptions Please read descriptions carefully. We list any features, specifications and details we know and/or research. If you don’t see the information you need or notice any discrepancy; Contact Us! We are here to answer all your questions regarding our eBay Listings and our eBay Store. Payments We accept Visa. MasterCard and Discover via PayPal. Payments are expected within 3 days after the close of the auction. An eBay Non-Paying Bidder Notification ... morewill be filed if payment has not been received. Item(s) will be relisted after few days and no payment from previous transaction will be accepted. Sales Tax is calculated on the final auction cost plus shipping charges and must be paid prior to shipment. Storage We offer storage services from small items to full containers. We also offer container loading. Contact us for prices. For buyers bidding on. Or buying multiple items, we will hold them for up to 7 days at no charge, after 7 days fees may apply. Contact us when you are planning to bid on multiple items across multiple days. Feedback Positive feedback will be left after payment has been received. If after receiving your item. You have concerns, questions or the item is not what you expected please Contact Us! We want to make your transaction a pleasant experience. Don’t leave Negative or Neutral feedback before doing it. We are professionals and we are here to help you. Return Policy We accept returns for all our items listed as working. Items listed in“AS IS” condition or“For Parts or Repair” have no warranty. Read our descriptions carefully. We give 14 days to Contact Us and return the item. Refund can be proce
|
|
|
USED VALENITE THREADING BAR PGTBR-143-320 7" OAL X 1-1/4" SHANK 1199
YOU ARE BIDDING ON ONE USED VALENITE THREADING BAR PGTBR-143-320 7" OAL X 1-1/4" SHANK DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CARMEX LATHE THREADING BAR SIR 0750 P16 STK 932
CARMEX LATHE THREADING BAR SIR 0750 P16 STK 932. 3/4" SHANK. 7" OAL Customer service is very important to our business. We continually strive to improve our services in order to meet our customers’ expectations. Combined shipping is provided whenever possible to help save our customers money for multiple item purchases. If you are concerned you purchased the wrong item? If you would like to know where you package is in transit? If you have an issue with an item you received? BEFORE opening an Ebay case PLEASE contact us directly to resolve any concerns or issues you may have. Our business hours are Monday- Friday 8:00am thru 5:00pm and you can reach us at 256-395-0077
|
|
|
CARMEX LATHE THREADING BAR SIR 0500 M16 STK 931
CARMEX LATHE THREADING BAR SIR 0500 M16 STK 931. 5/8" SHANK. 6" OAL Customer service is very important to our business. We continually strive to improve our services in order to meet our customers’ expectations. Combined shipping is provided whenever possible to help save our customers money for multiple item purchases. If you are concerned you purchased the wrong item? If you would like to know where you package is in transit? If you have an issue with an item you received? BEFORE opening an Ebay case PLEASE contact us directly to resolve any concerns or issues you may have. Our business hours are Monday- Friday 8:00am thru 5:00pm and you can reach us at 256-395-0077
|
|
|
Lantern Tool Post 1/2" Threading Boring Bar Holder Lathe Bit Machinist Gunsmith
Ebay Base This auction is for a lantern type. Threading& boring bar holder in 3/4" x 3/8" shank. This holder is model №. 00B made by Armstrong. It holds 1/2" bars and comes with a very sharp threading bar. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can be proud of, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
|
|
|
TOOL-FLO MODEL SI-CDHOL-208 INDEXABLE ACME THREADING INTERNL BORING BAR INSERT
ag6 2.RhasErr,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1491c91ed93-0x10d-
|
|
|
Threading boring bar SI CTL HOR 05102 COM
Up for bid is a threading insert boring bar 5/8 diameter x 5-1/2 long aprox come as show in the picture
|
|
|
Kennametal Model S1012-LSER3 Threading Insert Bar + 5 NEW LT16NRAG60K inserts
GREAT DEAL! This auction is for a Kennametal Model S1012-LSER3 Threading Insert Bar + It comes with 5 NEW LT16NRAG60K inserts. Kennametal- 1288921- Indexable Threading Toolholders Thread Type: Internal Hand of Holder: Right Hand MSC Part# Price: $148.04 ea. MSC Part# Kennametal- 2500931- Laydown Threading Inserts Material: Carbide Insert Style: 16NR MSC Part# Price: $26.52 ea. This boring bar is used. But in excellent condition. I have been it the machining/ tool& die business for over 30 years. Do to unforseen issues I am selling off all my tooling that I have accumulated over the past 30 years. Ask about many other tooling items- solid carbide boring bars, end mills, drills, taps, reamers, tool holders, scales, number& letter stamp sets, ect. We ship via usps/ Pay Pal shipping. You will receive a notice from Pay Pal when your item ... moreships& you will also receive a tracking number for you item PAYMENT: We gladly accept payment by Pay Pal. Please email us about other payment options. SHIPPING: We ship to USA mailing addresses only. No APO mailing addresses on this item) I will always make an effort to ship the day after your payment is received. I ship all of my items via USPS with delivery confirmation. RETURN POLICY: We have a money back guarantee. If you are unhappy with any item you received in our auction. Return it(in the same condition it was received in) and we will refund your full payment + original s&h costs.
|
|
|
1" Mitsubishi INDEXABLE THREADING grooving tool BAR 8-3/4" long 1-1/4" shank
1" Mitsubishi INDEXABLE THREADING grooving tool The bar is cut down to 8-3/4" long 1-1/4" shank The only numbers left on it are S-CDG4NR20
|
|
|
7 Boring Threading Bar Lathe Bits 1/2" Machinist Gunsmith Tools Lot South Bend
Ebay Base This auction is for 7 Threading& boring bar lathe tool bits in 1/2" shank. These quality bits are are Carbide. Cobalt& HSS: They are sharp and ready to use. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can be proud of, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
|
|
|
Boring Threading Grooving Bar 3/16" Lathe Tool Bit Holder Machinist Gunsmith Lot
This auction is for a boring. Threading bar that holds 3/16" squared shank bits Seven 3/16" bits are included Holder's Shank is 7/16" Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures show the items being auctioned from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
|
|
|
Kennametal USA Internal Threading / Grooving RH Boring Bar BL-2508 Insert N.3R
Used condition. No insert. 1" 950" actual) Diameter. OAL 9" Uses any N style size 3 Right-hand inserts. I will be listing quite a few boring bars and internal threading/grooving bars. See other listings if you need some other large bars.
|
|
|
Threading Boring Bar ISPAEL S0812-L 5CA2 ½” x ¾” Shank x 6” Long
Threading Boring Bar ISPAEL S0812-L 5CA2 ½” x ¾” Shank x 6” Long For Questions Call John 314-398-7414 There Is A $15.00 Handling Fee That Will Be Added To All International Sales. ALL ITEMS ARE SOLD AS IS. WHERE IS Stock#6679-S
|
|
|
KENNAMETAL B-2906 INS-N-2L 12DL80 THREADING BORING BAR 10" long 3/4 diam
KENNAMETAL B-2906 INS-N-2L 12DL80 THREADING BORING BAR 10" long 3/4 diam CLICK ON THE PICTURES FOR CLOSE PICTURES.THE PICTURES USUALLY TELL THE CONDITION BETTER THAN I CAN DESCRIBE IT. see close pics.the diam of the shank is 3/4" 10" long.still nice condition.a little normal wear, a small amount of rust doesnt hurt anything.see pics.i showed a picture of the cutter that came in it.also included.not sure how much it was used. I WILL COMBINE SHIPPING WHERE POSSIBLE PUERTO RICO. ALASKA AND HAWAII SHIPPING MAY BE HIGHER ON SOME ITEMS IF THEY ARE LARGER PLEASE EMAIL FOR PRICE INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING BUYERS ARE RESPONSIBLE FOR TAXES AND DUTY FOR THERE COUNTRY. SOMETIMES ITEMS ARE HELD UP IN CUSTOMS AND CAN TAKE A LITTLE LONGER AT TIMES TO RECEIVE YOUR PACKAGE. INTERNATIONAL BUYERS PLEASE DON'T ASK ME TO ... moreLIE ON THE CUSTOMS FORM.I WILL ONLY PUT ACTUAL SALE PRICE AND ACTUAL CONTENTS ON IT. NO EXCEPTIONS. INTERNATIONAL BUYERS ARE ALSO RESPONSIBLE FOR KNOWING IF YOU NEED AN IMPORT LICENSE FOR THE ITEM YOU ARE BUYING OR IF IT IS PROHIBITED TO YOUR COUNTRY. ANY REFUNDS GIVEN WILL BE MINUS SHIPPING COSTS.THE ONLY REASON ACCEPTED FOR RETURN IS IF A MISTAKE WAS MADE IN THE DESCRIPTION. IF YOU HAVE A PROBLEM WITH YOUR PURCHASE. PLEASE LET ME KNOW BEFORE YOU LEAVE A NEGATIVE.IT IS BEST TO SEND A NICE EMAIL AND NOT A NASTY ONE.NICE EMAILS GET BETTER ACTION.
|
|
|
Model R166.4FK-D10-3 Indexable Threading Boring Bar by Sandvik + 2 NEW inserts
GREAT DEAL! This auction is for a Model R166.4FK-D10-3 B1M Indexable Threading Boring Bar by Sandvik Coromant + 2 NEW inserts. New price $249 + inserts. R166.4FK-D10-3 B1M T-MAX. U-LOCK Boring Bar Indexable Turning Tool T-Max U-Lock Turning Tool. Nomenclature R166.4KF-D24-3, Style R166, Eccentric Screw Clamping Lock, Negative Rake, Left/Right Hand R, Min Bore 1.970 In, Bar Dia 1.50 In, Overall Length 4 5/18 In, Insert Shap Triangular Insert Shap, Inscribed Circle 0.375 In, Insert Thickness 0.1563 In, Dimension F1 1.063 In, Dimension L3 1.26 In This boring bar is used. In very good condition. I have been it the machining/ tool& die business for over 30 years. Do to unforseen issues I am selling off all my tooling that I have accumulated over the past 30 years. Ask about many other tooling items- solid carbide boring bars, end mills, drills, ... moretaps, reamers, tool holders, scales, number& letter stamp sets, ect. We ship via usps/ Pay Pal shipping. You will receive a notice from Pay Pal when your item ships& you will also receive a tracking number for you item PAYMENT: We gladly accept payment by Pay Pal. Please email us about other payment options. SHIPPING: We ship to USA mailing addresses only. No APO mailing addresses on this item) I will always make an effort to ship the day after your payment is received. I ship all of my items via USPS with delivery confirmation. RETURN POLICY: We have a money back guarantee. If you are unhappy with any item you received in our auction. Return it(in the same condition it was received in) and we will refund your full payment + original s&h costs.
|
|
|
Tool flo LTR 625-32 threading bar and inserts
Tool Flo threading bar and new inserts
|
|
|
Threading bar turning tool holder and seven brand new tool Flo threading inserts
Threading bar coolant thrue adjustable with seven brand new inserts
|
|
|
Kennametal 1.5" x 6" Carbide Insert Grooving Threading Bar A24 NER3
Kennametal 1.5" x 6" Carbide Insert Grooving Threading Bar A24 NER3 Coolant Through Shank Good Condition SV1-D3 Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback
|
|
|
RTW S32-STHOR-5 Threading/Grooving Boring Bar
Good used RTW threading tool 2' dia. with 9 tool Flow inserts TNMC 54.038R
|
|
|
Kennametal A08-NER2 Top Notch 1/2" Threading/grooving bar [1 only]
This Kennametal top notch 1/2" diameter X 8" long boring bar is ideal for threading or grooving. It has a minimum bore diameter of 0.730" Coolant thru, and uses N.L gauge inserts
|
|
|
KDK 152 QUICK CHANGE THREADING & FACING BAR COMBINATION TOOL HOLDER - 150 SERIES
Believed to be made in the U.S.A. by Jack Kuhn(KDK) of South Gate. California Model Number: KDK-152 Threading& Facing Bar Combination This is a tool holder in the KDK 150 series of quick-change tool holders in used condition. Note that this holder does not have manufacturer's information showing but appears identical to other holders marked with the KDK logo. Click to view a PDF of the KDK catalog. Bit Capacity: 5/8" For lathes with a 15" 18" swing. Center height 1.250" and up Note from KDK Catalog: The dovetail dimensions are the same on 0. 100, 150 and 200 series Tool Posts which allows bars from these series to be interchangeable. However, if using larger series tool holder on smaller tool post, you must have enough center height. Comes as shown in pictures. We have many KDK quick change tool holders listed ... morefor sale on eBay. To view others we have for sale. Click to go to our eBay store. Then check the"Quick Change Holders& Posts" category, or search for KDK within our store. We are always happy to combine shipping upon request. Up to 4 holders can ship in one box for the same shipping price as one holder. Send us a message through eBay if you have any questions. 1195-12
|
|
|
SANDVIK R166.D16-3 G4M THREADING , GROOVING BAR
1" DIA. x 12" L
|
|
|
Kennametal 1" Carbide Shank Boring / Threading Bar E16LSER3 ND3, Used
Kennametal 1" Carbide Shank Boring/ Threading Bar marked E16LSER3 ND3, The total length is 11-1/2" Long The insert clamp is missing. Someone was using the bar without the clamp Good Used condition. I don't see and damage on the bar You get the bar just as you see in the pictures Posted with
|
|
|
Kennametal A10-NER2 ND2 Threading and Groovong Bar 5/8" Shank with 3 Inserts
This has a coolant hole and the shank is 5/8" in diameter. Three threading inserts are included. The overall length is 10" This bar is used but in like new condition. It has some writing etched on it. I try to give as accurate of a description as I can and point out any flaws that I notice in an item. If I overlook something. Please bring it to my attention so I can address the issue. I want you to be happy with your purchase! I offer a generous shipping discount for multiple items. PS33
|
|
|
Boring Threading, Grooving Bar With 1-1/2" Shank And 7-3/4" Long. Used
Boring Threading. Grooving Bar With 1-1/2" Shank And a total length of 7-3/4" Used condition. You get the bar just as you see in the pictures I don't see a manufactures name or part number on the bar Posted with
|
|
|
2 VALENITE LATHE GROOVING/THREADING BAR GTB-062
LISTING IS FOR 2 VALENITE LATHE GROOVING/THREADING BAR GTB-062- 5/8" SHANK- 6" OAL
|
|
|
SNAP-TAP L THREADING BAR CNR-00100-8-16 STK 1883
SNAP-TAP L THREADING BAR CNR-00100-8-16 STK 1883 1" SHANK 8" OAL Customer service is very important to our business. We continually strive to improve our services in order to meet our customers’ expectations. Combined shipping is provided whenever possible to help save our customers money for multiple item purchases. If you are concerned you purchased the wrong item? If you would like to know where you package is in transit? If you have an issue with an item you received? BEFORE opening an Ebay case PLEASE contact us directly to resolve any concerns or issues you may have. Our business hours are Monday- Friday 8:00am thru 5:00pm and you can reach us at 256-395-0077.
|
|
|
KDK-156 QUICK CHANGE THREADING & FACING BAR LATHE TOOL POST HOLDER
Made in U.S.A. by L.W. Jack) Kuhn of South Gate. California. This is a KDK-156 Holder in good condition. Holder has been milled to allow for larger capacity tool. Model# 156 SPECIFICATIONS: Tool Bit Capacity: 11/16" 1" Comes exactly as shown in pictures. LOCAL PICKUP AVAILABLE! If you have any questions please contact Mike@ 323-202-3955 or Nick@ 323-837-8598. Thank you.
|
|
|
1" Ultra Dex A16 SCLCCR3 22907 - 0086 Threading Bar w/ 5 New Inserts
You are purchasing a used 1" Ultra Dex A16 SCLCCR3 22907- 0086 Threading Bar w/ 5 New Inserts. Please add this item to your cart and request an invoice for combined shipping if you're purchasing other items from me.
|
|
|
INDEXABLE 17/32" THREADING BORING BAR W/ 1/2" SHANK
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! NEED A SPECIFIC ITEM& YOU CAN'T FIND IT ANYWHERE. WE HAVE IT! CALL US@ 909.544.8882 ASK FOR BRANDON! The Item You Are Bidding On Is a Indexable Threading Boring Bar In GREAT. Working Condition. Features: ALL ITEMS FEATURE A NO HASSLE RETURN POLICY. PLEASE READ FULL DESCRIPTION FOR ALL ITEM DETAILS! Item Specifications: Cutting Diameter: 17/32" Shank: 1/2" Overall Length: 1-3/4" Item Comes Exactly as Shown in Pictures. If You Want To Arrange Shipping Please Contact Us For A Quote. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted.
|
|
|
VALENITE INDEXABLE THREADING & GROOVING BAR 1" SHANK W/ 4 CARBIDE INSERTS
Valenite Indexable Threading& Grooving Bar Model PGTB 3R-180-32 1" Shank x 5" Long Includes 4 New Solid Carbide Inserts No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item ... morewill be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14b408fbcde-0x107-
|
|
|
SNAP-TAP INDEXABLE THREADING BAR 5/8" SHANK W/ INSERT SNR 00625 60-16
Snap-Tap Indexable Threading Bar Model SNR 000625 60-16 5/8" Shank x 6" Long Includes New Solid Carbide Insert& Wrench No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will ... morebe shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|