|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Features: 1.hand lever operated shrinker stretcher for shrinking or stretching mild steel sheet metal up to 16-gauge, 1.5mm in thickness and can be bench ... moremounted or attached to the optional stand. 2.This is the perfect machine for working metal for auto, cycle or aero plane body work. This machine is ruggedly built and can shrink or stretch metal with ease at full capacity.3.Ideal for repair work around wheel openings, door jams, windshields and trunk gutters Model SG-18 MPN 173228 Brand KAKA Industrial Capacity (mm) 1.5 Throat Depth (mm) 70 Packing size (cm) 46 x 20 x13 N.W/G.W (kg) 5.4 / 5.7 UPC 745369240628.
Buy It Now
$211.26 Shipping Condition: Used Location: Cadillac, United States Looks in good condition. Untested, from retired Mom & Pop Operation Estate, has been in storage for many years.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Features: 1. Bend and shear with one compact tool, perfect for countless applications. 2. Double-featured miniature machine will save you hours of tedious ... moresheet metal fabrication and finishing 3. Use on copper and brass 1mm, aluminum 1.2mm 4. Blade length: 204mm (8”) 5. Max. Bending angle: 90° Standard accessories: Dies 40mm, 20mm, 15mm and 10mm Handle Optional accessories: No optional accessories..
Buy It Now
$350.00 Shipping Condition: Used Location: Rosedale, United States We believe this is a custom press made for GM. Item was removed from a local automotive plant assembly line. It was working when removed and there are ... moreno known issues. We are here to help! Manufacturer: Schmidt.
Buy It Now
Condition: Used Location: Lenapah, United States All products are as is.
Buy It Now
Condition: Used Location: Lincolnshire, United States Furnace Rack.17"L x 12"W x 12"H. Dual Door Limit Safety Switch. High Heat Option. Steel Stand. Input Power. Item Dispute will be opened. If not, we reserve.
Buy It Now
Condition: Used Location: Lincolnshire, United States Furnace Rack.17"L x 12"W x 12"H.29.5"L x 23"W x 30"H. Steel Stand. If not, we reserve. Preliminary specifications subject to verification.
Buy It Now
$70.19 Shipping Condition: New – Open box Location: Pella, United States Power is supplied by a 1,800 watt motor that is low speed, with high torque. The quick acting clamp pivots for mitering up to 45 degrees. The ergonomic ... moreD handle design aids in safety and gives this saw a well balanced feel while the precision steel construction and cast aluminum base ensure that this saw will last under the most strenuous conditions.
Buy It Now
$68.46 Shipping Condition: Used Location: Leander, United States And to move/adjust the stand. No other testing was done. Impact springs can be switched to adjust impact force. Hand-adjustable impact force. Impact press. ... moreLab & Test. Throat depth: 3-7/8". Consistent impact independent of product thickness.
Buy It Now
Condition: New Location: Knoxville, United States We introduced the very first benchtop bandsaw to the U.S. back in 1997 and since then, thousands of our saws have been bought by satisfied users. The ... moreKAMA EV 90DM miters 45° both ways in a heavy duty, space saving bench top design.
Buy It Now
$73.28 Shipping Condition: Used Location: Huntsville, United States For security purposes, all of our parts are sealed and or marked so that they can be identified. Location: JJ27.4.
Buy It Now
$78.85 Shipping Condition: Used Location: Rockford, United States Airmite Benchtop Hydraulic Press, DAP38. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$73.77 Shipping Condition: New Location: Pella, United States MetalAce 22B Benchtop English Wheel MA22B(Optional welded stand available for $200) Clearly. This is the most popular of in-home English Wheels. Trick ... moreout your custom-built bike or complete hobby projects without breaking the bank. Provides outstanding performance on small jobs like motorcycle tanks, tank covers, seat cowls and aircraft fillets. Versatile use- mount on bench, clamp in vise or use with optional welded stand. Made in the USA! 22B Specifications Height: 29" Width: 27" Standard working height(from bench top) 16 1/2" Standard working height(with optional stand) 45" Base: 6" x 19" Throat: 22" Weight: approximately 73 lbs. Upper wheel: 8" dia. x 2" wide 1045 alloy steel billet. Polished to a smooth 63 finish Machine comes standard with 3.250 Radius anvil wheel Additional anvil wheels and stand sold separately Can be mounted to a bench. Clamped in a vice or used with the optional welded floor stand Anvil yoke is adjustable on both sides of the axle support with thumb screws so the anvil wheel can be trued with the upper wheel 22B Capabilities Capacity of 18 gauge steel and up to.080" aluminum Features can be rolled into the center of a 44" panel NOTE: This item will ship from the manufacturer. Lead times may exist. Feel free to contact us for availability. MORE INFO: If you have any questions. Need technical assistance or would like to place an order, please give Derek a call@ 1-877-826-7268 or send us an eBay message. Visit our website to see our full line of metal fabrication equipment. Powered by
Buy It Now
Condition: Used Location: Albion, United States Model: 250. Taper holder: SK50: HSK-A63.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Features: 1. hand lever operated shrinker stretcher for shrinking or stretching mild steel sheet metal up to 18-gauge, 1.2mm in thickness and can be bench ... moremounted or attached to the optional stand. 2. This is the perfect machine for working metal for auto, cycle or aero plane body work. This machine is ruggedly built and can shrink or stretch metal with ease at full capacity. 3. Ideal for repair work around wheel openings, door jams, windshields and trunk gutters Model SS-18 MPN 173208 Brand KAKA Industrial Capacity (mm) 1.2 Throat Depth (mm) 25.4 Packing size (cm) 46 x 20 x13 N.W/G.W (kg) 5.5 / 5.8 UPC 745369240604.
Buy It Now
Condition: Used Location: Pontiac, United States This is a complete working pneumatic bench top dot peenn parts marking machine with a work area of 110mm x 90mm and height of 500mm. Dot Peen Parts Marking ... moreMachine. Pnuematic Dot Peen Parts Marker. Cut and copy link below for video of maker under power.
Buy It Now
$70.19 Shipping Condition: New – Open box Location: Pella, United States The 782XL Deluxe kit is your all in one stop to get up and running quickly. This kit is great when floor space is limited or to take with you on the go. ... moreThe HEM Saw 782XL by Femi portable band saw is a great fit for hobbyists and those needing an accurate portable saw with a large cutting capacity.
Buy It Now
$70.76 Shipping Condition: Used Location: Leander, United States Notes:This press is in at-least-partial working condition. and to move/adjust the stand. No other testing was done. Impact springs can be switched to ... moreadjust impact force. Impact press. Hand-adjustable impact force.
Buy It Now
Condition: New Location: Knoxville, United States We introduced the very first benchtop bandsaw to the U.S. back in 1997 and since then, thousands of our saws have been bought by satisfied users. The ... moreKAMA EV 88 miters 45° right in a heavy duty, space saving bench top design.
Buy It Now
Condition: Used Location: Los Angeles, United States Our vast warehouses contains over 1,500 pieces of New and Used machines available for inspection in person, or live via internet webcam fed directly to ... moreyour computer's browser. LOCAL PICKUP IS FREE, LOADING ONTO A FLATBED OPEN TRUCK OR BOX VAN.
Buy It Now
Condition: Used Location: Guilford, United States Make: Columbian Model: 3.5" Cant See Vise Number Condition: Used, Overall in Great Shape, Repainted needs to be Lubed Good For Being Mounted on a Benchtop. ... moremodel: Columbian 3.5".
Buy It Now
Condition: New Location: Davenport, United States (Tooling and optional Tripod base are NOT included.). Ercolina 070 Benchtop Model - YouTube. Rotary dial setting for bend angle and springback. Remote ... morefoot pedal for hands-free operation. Patented swing away counterbending die vise.
Buy It Now
Free Shipping Condition: New Location: Novafeltria, Italy THESE SCHEPPACH GRINDERS ARE IDEAL FOR ALL GRINDING. - Adjustable tool rests extended the life of the grinding wheels. - Weight net / gross 7 / 8.5 kg. ... more- Input 400 W. - Motor 230ac / 240dc V. - Speed 2850 rpm.
Buy It Now
$60.56 Shipping Condition: New Location: Knoxville, United States We introduced the very first benchtop bandsaw to the U.S. back in 1997 and since then, thousands of our saws have been bought by satisfied users. The ... moreKAMA AD105S miters 45° right in a heavy duty, space saving bench top design.
Buy It Now
$25.40 Shipping Condition: Used Location: Fruita, United States Up for sale is a Industrial Magnetics Bench Top Demagnetizer. It is 120V and made in the USA. Tested and works as it should. Shows signs of use with scuffs ... moreand scratches. Red light bulb cover is broken but light still works.
Buy It Now
Condition: Used Location: Middlebury, United States Looks to have floor tile for a bench top. Country of Manufacture: N/A. Size: Length: 61 in. Width: 29 in. Height: 42 in. Warehouse Location: Weld Tables. ... moreNeed it urgently?. Call us and we will do what we can to get it to you quickly.
Buy It Now
Condition: Used Location: Middlebury, United States Looks to have floor tile for a bench top. Country of Manufacture: N/A. Size: Length: 61 in. Width: 29 in. Height: 42 in. Warehouse Location: Weld Tables. ... moreNeed it urgently?. Call us and we will do what we can to get it to you quickly.
Buy It Now
Condition: Used Location: Guilford, United States Model: DETECTO series 60.
Buy It Now
$259.00 Shipping Condition: New Location: Duluth, United States Quality steel-fabrication construction Spring loaded material clamp beam Light duty and cost effective Adjustable blade gap clearance for thin material ... moreIncludes front sheet supports and backgauge Model Q01-5216B MPN 172015 Brand kakaindustrial Max.shearing thickness(mm)-mild steel 1.6 Max.shearing Length(mm) 1320 Back gauge(mm) 800 Packing size(cm) 180X60X120 N.W./G.W.(lb) 903/1257 UPC 745369241717.
Buy It Now
Free Shipping Condition: New Location: China Why Choose VEVOR?. With the foot pedal in use, your hand can be free. The capacity can work up to 18 gauge. It can work on up to 18 Gauge Steel. Multiple ... moreAnvil Dies. A set of fittings to help increase your working efficiency.
Buy It Now
Condition: Used Location: Chico, United States
Buy It Now
$71.00 Shipping Condition: Used Location: Philippines We will then arrange the booking and pick-up service. A:Hmmmnnnn yes.
Buy It Now
$143.40 Shipping Condition: New Location: Layton, United States Stainless Steel requires a strike in order for your final plate to adhere properly. The alternative would be a Woods Nickel Strike, however for many industries ... morenickel is not acceptable for various reasons.
Buy It Now
$125.00 Shipping Condition: New Location: Pella, United States MetalAce English Wheel Discovery Kit MADiscovery(Includes 22B. Additional 8.50" R. and flat anvil wheels, plus shot bag, large bossing mallet, radius ... moregauge, and Covell's"English Wheel Techniques" instructional DVD) The MetalAce 22B Discovery English Wheel Kit is a must-have for any metal shaping enthusiast or beginner. This kit will leave you fully equipped. Including all the essentials to get started right. The MetalAce 22B bench top machine is the most popular of in-home English Wheels. MetalAce offers extensive anvil configurations to meet your needs. Trick out your custom-built bike or complete hobby projects without breaking the bank. These English Wheeling machines provides outstanding performance on small jobs like motorcycle tanks. Tank covers, seat cowls and aircraft fillets. Versatile use: mount on bench, clamp in vise or use with optional welded stand. The anvil yoke is adjustable on both side of the axle so the anvil can be trued with the upper wheel. This quality wheel is proudly made in the USA. Discovery Kit Specifications Height: 29" Width: 27" Standard working height(from bench top) 16 1/2" Standard working height(with optional stand) 42 3/4" Base: 6" x 19" Throat: 22" Weight: approximately 73 lbs. Upper wheel: 8" dia. x 2" wide 1045 alloy steel billet. Polished to a smooth 63 finish Machine comes standard with 3.250. 8.50, and Flat R. anvil wheels Additional wheels and stand sold separately Can be mounted to a bench. Clamped in a vice or used with the optional welded floor stand Anvil yoke is adjustable on both sides of the axle support with thumb screws so the anvil wheel can be trued with the upper wheel Discovery Kit Capabilities Capacity of 18 gauge steel and up to.080" aluminum Features can be rolled into the center of a 44" panel Comes with everything you see pictured! NOTE: This item will ship from the manufacturer. Lead times may exist. Feel free to contact us for availability. MORE INFO: If you have
Buy It Now
$143.40 Shipping Condition: New Location: Layton, United States You simply place your item on the rack and hang it on the gold plated busses. This kit literally sets up in seconds. The entire kit only requires the ... morepower cables to operate all three plating cells.
Buy It Now
$24.06 Shipping Condition: Used Location: Chattanooga, United States Single Ram, Benchtop, Direct Force. Hanson Weld Head. Can be used for welding or soldering.
Buy It Now
$24.06 Shipping Condition: Used Location: Chattanooga, United States Single Ram, Benchtop, Direct Force. Hanson Weld Head. Can be used for welding or soldering.
Buy It Now
Condition: New Location: Knoxville, United States We introduced the very first benchtop bandsaw to the U.S. back in 1997 and since then, thousands of our saws have been bought by satisfied users. The ... moreKAMA EV 91-DMHV miters 45° both ways AND cuts 90° vertical in a heavy duty, space saving bench top design.
Buy It Now
Condition: Used Location: Long Beach, United States
Buy It Now
Condition: Used Location: Madawaska, United States HEAVY 200lb IDEAL FOR ANTI VIBRATION PURPOSES ETC. NICE QUALITY HEAVY WORK BENCH / ENGINEERS BENCH TOP. The item you receive may be different from the ... moreactual item in the photo in the case of multiple quantity lots.
Buy It Now
$80.10 Shipping Condition: Used Location: North Chelmsford, United States I used it on my Grizzly G0768.
Buy It Now
Condition: Used Location: Toledo, United States ENERPAC POWER UNIT. CAPACITY. 10 TON. STROKE. 10". BED. 5.75" W X 18.75" L. PUSH BUTTON.
Buy It Now
$21.99 Shipping Condition: Used Location: Lombard, United States OLIVER ADRIAN DRILL GRINDER Bench Top Model 21 belt drive Guard. Used condition with dings and scratches. No breaks or repairs, has multiple layers of ... morepaint. Please see photos for details. Thanks for looking
Buy It Now
Condition: New Location: La Vergne, United States BENCH TOP LATHE. Swing Over Bed (In.). Swing Over Tool Rest Base (In.). Style (Type): BENCH TOP. Spindle Speeds: Variable. Bed Construction: Cast Iron. ... moreDistance Between Centers (In.). Variable speed from 400-3000 RPM.
Condition: Used Location: Leander, United States Manufacturer:Optical Gaging Products OGP. Manufacturer: Optical Gaging Products OGP. The top panel that holds the curtain is not attached to the comparator. ... moreEdge Detection: OGP Internal Projection. Notes:This comparator is in fair working condition.
Buy It Now
Free Shipping Condition: New Location: Banning, United States On-Off Toggle Switch (Optional Lock).
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States 5 Hardened Removable Fingers. Convenient Small Size Great for Bench Top Use. Bending Capacity: 20 Gauge (1mm). Working Height: 9" (230mm).
Buy It Now
$81.22 Shipping Condition: Used Location: Tempe, United States These products are subject to export restrictions under U.S. law. INTERNATIONAL EXPORT POLICY. Notify us within 24hours.
Buy It Now
Condition: Used Location: Baltimore, United States Model: DAP38. Pipe Size: 1/2″. Power Capacity: 2 Tons.
Buy It Now
Condition: Used Location: Guilford, United States Model: PRECISION ARC 2400. PRECISION ARC. Global Machine Brokers, LLC.
Buy It Now
Free Shipping Condition: For parts or not working Location: San Jose, United States Newport ESP300 motion controller(ESP300-111111) 3-axis version with 3-Amp driver cards and GPIB option. Compatible with a wide range of Newport motorized ... morestages. Tested. Fully functional, and in excellent cosmetic condition. For electronic manual see link below: Payments. Shipping, and Returns: We allow a 14-day right of inspection. Any r eturn shipping must be by traceable and insured means. Buyer will be responsible for all shipping costs. Items are typically shipped within 1-3 business days following a cleared payment. We minimize buyer's cost by re-using shipping supplies and selecting the lowest rate service available. Buyer may request alternative shipping services. Including overnight delivery when available. Multiple items will be automatically combined into a single shipment when possible. Pennsylvania residents pay sales tax. International buyers are welcome. All international payments must be made through PayPal. International buyers are solely responsible for import duties and/or brokerage fees. We offer low-cost shipping by USPS Priority Mail International when available. Please note that typical international delivery takes 2-4 weeks and there have been occasional delays of over 8 weeks. We are not responsible for shipment delays due to circumstances outside our control. If your purchase is time-critical. Please select UPS Worldwide service or contact us for other available options.
Buy It Now
Condition: Used Location: Temecula, United States The2000X aed Actuator is a compact, rigid unit designed for use in manual, semi-automated, and automated ultrasonic welding systems. The Actuator is designed ... moreto be operated in an upright position, but is capable of running horizontally or inverted.
Buy It Now
$143.40 Shipping Condition: New Location: Layton, United States You simply place your item on the rack and hang it on the gold plated busses. This kit literally sets up in seconds. The entire kit only requires the ... morepower cables to operate all three plating cells.
Buy It Now
Condition: Used Location: Holland, United States X AXIS. . 10". Y AXIS. . 2.5". WORKING LOAD. . PROFILE ILLUMINATION. YES. We load for free. TABLE AREA. . 10" X 4". MODEL. 20-3600.
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States 5 Hardened Removable Fingers. Convenient Small Size Great for Bench Top Use. Bending Capacity: 20 Gauge (1mm). Working Height: 9" (230mm).
Buy It Now
Condition: Used Location: Toledo, United States DISTANCE BED TO FLOOR ON STAND. HOLE IN BED. . AREA OF BED. . 5-1/2" X 9". DISTANCE BETWEEN HOUSINGS. DISTANCE BACK FROM CENTER. HOLE IN PISTON. 3/4".
Buy It Now
Condition: Used Location: Guilford, United States Model: SCHERR TUMICO 20-8600. Scherr Tumico 20-8600 bench top Visual inspection System, Optical Microscope 120V. Make: Scherr Tumico. SCHERR TUMICO. Volts: ... more120. Weight: 150 Height: 34 Length: 24 Width: 20.
Buy It Now
Condition: Used Location: Guilford, United States Model: Columbian 3.5". Work Holding.
Buy It Now
Condition: Used Location: Guilford, United States Make: Rockwell Delta Model: 15-665 Serial No: 1569398 Condition: Used, Overall in Great Shape, Needs a new belt. model: ROCKWELL DELTA 15-665. ROCKWELL ... moreDELTA. Drill & Tap Machines.
Buy It Now
Condition: Used Location: Guilford, United States Model: NOBLE 292792.2. Machine Height without Table is 20" tall. 12" 3/4 X 12" 3/4 Machine Foot Print. Global Machine Brokers, LLC. Spec Sheet.
|
|
|
|
DAKE USA ENGINE CO. 0 BENCHTOP 1.5 TON ARBOR PRESS #0 MODEL 1-1/2 BENCH
FOR SALE: DAKE ENGINE COMPANY. ARBOR PRESS. MODEL 0. MADE IN THE U.S.A. IN GRAND ARBOR. MICHIGAN 14 DAY MONEY BACK GUARANTEE MINUS SHIPPING ASK QUESTIONS PLEASE BEFORE BUYING I WORK FULL TIME LIKE MOST SELLERS AND I DO MY BEST TO SHIP THE ITEM OUT WITHIN 2 BUSINESS DAYS. HOWEVER ON THE RARE OCCASION IT CAN TAKE 3-4 DAYS. I DO MY BEST TO DESCRIBE THE ITEM AS BEST AS POSSIBLE AND INCLUDE THE BEST PICTURES I CAN PHOTOGRAPH. RETURNS END UP COSTING BOTH THE BUYER(YOU) AND THE SELLER(ME) A GOOD AMOUNT OF MONEY. SO PLEASE BEFORE BIDDING/PURCHASING ASK ANY QUESTIONS. Posted with
|
|
|
FAMCO Model 1 Arbor Press 3/4 Ton Benchtop Lever
FAMCO#1 Arbor Press 3/4 Ton Benchtop. Made in USA. In good used condition. No damage. Appears functional and complete but do not guarantee. Good paint. Includes a removable plate and center set as shown.
|
|
|
Pierce-All Notching Unit Corner Notcher 5" x 5" benchtop unit
click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge You are viewing a Pierce-All 5" x 5" corner notcher unit. Nice little bench top unit so view all the pictures and bid with confidence. internal: HTB- 032213L) SEND ME FURTHER QUESTIONS AND COMMENTS! Condition Legend: MINT/ NEW: Never used or appears never used. Excellent: Like new condition with very little wear Very Good: Few scratches or engravings. Good: Scratches or engravings. Small but noticeable. Fair: Substantial wear and scratches. But item is functional. WHAT TO EXPECT AFTER BIDDING AND WINNING: 1. Win your item! 2. Receive a total with shipping(UPS to the US) applicable taxes(5% GST only in Canada. 13% HST for Ontario and BC customers and the East coast) 3. complete payment(we accept paypal or credit card over the phone) 4. In just 5-7* ... moredays receive your item quickly with UPS to the US and Canada Post to Canada or a freight company INFO FOR SMALL ITEM SHIPPING ITEM WEIGHING 150lbs and LESS For items under 150lbs(30kg) I use UPS.com to the US and Canada Post to Canada. There are absolutely no issues with customs to the US. Canada Post is very fast within Canada(typically within 5 days) And UPS is equally as fast to the US usually taking around 5 business days. The cost listed below is shipping for the US using UPS. Canadian customers please email me to get a shipping cost for you which should be cheaper. I use an outside packager so after your payment is received, your item is sent another local business which packages and ships your goods. It may take up to 5 business days to get your item properly packaged and shipped. As soon as I receive your TRACKING#s I will email them to you and you can track using that number at or. Very rarely. Canada Post will LOSE or DAMAGE an item. I insure every shipment, but there is a process to getting the insurance money which can include direct contact and information from the receiver(which is you) I will definitely refund you if you do not receive your shipment or i
|
|
|
YY Benchtop Demagnetizer TC-50
YY Benchtop Demagnetizer TC-50 YY Benchtop Demagnetizer TC-50 Used but in good condition. It powers on and buzzes/hums. I am not able to test it further. Item is sold as pictured with no additional items included. Disclaimer The item offered here is in no way recommended or certified for any specific use. By purchasing this item you agree that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with this item. By purchasing or bidding on this equipment you are indicating your acknowledgement of and agreement to the terms of this disclaimer. We strive for 5-star service by stating upfront our policies. Shipping rates and shipping frequency. We strive to earn 100 percent'5 Star' scores from you. The star-scores are very important to us, because eBay ... moreuses them to determine our fees and our visibility in the eBay search results. Our future success depends on it! Thank you! 9-3-3)8lbs14oz 10/8/8
|
|
|
ROMANOFF JELRUS E-Z BLASTER BENCHTOP SAND BLASTER MODEL R 110V
ROMANOFF JELRUS E-Z BLASTER BENCHTOP SAND BLASTER MODEL R 110V Posted with
|
|
|
Sybron Thermolyne 10500 Benchtop Heat Treating Furnace - Good Condition 120 Volt
Offered is a Sybron Thermolyne 10500 benchtop heat treating furnace. 120 Volt 14 Amp 1680 Watt. The oven chamber is 5.5" wide X 3.5" tall X 6.5" deep. The furnace has a top range of 2200 deg. F/1200 deg. C. The temperature con trol is electronic. It is in good working condition. I set the temp control to 1000 deg. F and it heated to a nice glowing red. I could not measure the temp, but the color was right. Over all(not including the handle) it is 18" tall X 12" wide X 14" deep. This is the perfect size furnace for the small machine shop. Or home machinist. I bought this unit several years ago. For a project that never happened, so I'm selling it so someone will get use out of it. Local pickup is available. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13fd9cdef43-0xf4-
|
|
|
CNC Benchtop lathe cabinet Colne 5 D&M Computing Lathe
Excellent Enclosure for your CNC Benchtop Lathe project. 27"X14"X9.5 Enclosure with 1/4" thick clear plastic cover has separator panel to isolate headstock and electronics. Install your project and get a clean looking functional enclosure. Low starting bid and no reserve. Plus FREE domestic shipping to continental US customers. FREE shipping for continental US only all other locations will incur additional charges depending on location. I will ship this unit Internationally at winning bidders expense contact me for shipping costs to your location. I will combine shipping with other items I have listed. Request an invoice BEFORE you pay and it will save you money on multiple items. What you see is what you get. If you don't know what you are looking at ask questions and I will respond quickly. Good luck bidding,
|
|
|
DYNA MECHTRONICS DYNA MYTE 2800 BENCHTOP CNC MILL MILLING MACHINE
DYNA MECHTRONICS DYNA MYTE 2800 BENCHTOP CNC MILL MILLING MACHINE. IN GOOD SHAPE POWERS UP BUT SELLING AS/IS BECAUSE I ONLY GOT IT TO MOVE DOWN AND TO THE SIDE COULD NOT GET TO SPIN. SORRY I DONT KNOW HOW TO USE IT. DOOR IS BENT A LITTLE TOP LOCK WILL CLOSE BUT NOT THE BOTTOM LOCK. PLEASE LOOK AT THE PIC'S FOR MORE INFO AND COND. COMES WITH WHAT YOU SEE IN THE PIC'S ONLY. SELLING AS/IS I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I ... moreSHIP EVERY MONDAY. WEDNEDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY NO INTERNATIONAL TRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES.
|
|
|
SpectraLIGHT 0200 Benchtop Router CNC Machining Center W/Control, Software, etc
For Sale SpectraLIGHT 0200 Benchtop Router CNC Machining Center W/Control. Software SpectraLIGHT 0200 Machining Centre A tabletop CNC system that fits comfortably into any classroom. This 3-axis machine uses EIA. ISO and Fanuc compatible G&M code programs to cut parts in a variety of materials. This machine is in perfect working condition. See video for functionality. http:www.youtube.com/watch?v=Z1kcO1F2xXE&feature=youtu.be You will receive everything you see in the picture EXCEPT the monitor. We added it to be able to show the software. Due to the size and weight. This item is for local pick up only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-141aec5601d-0x101-
|
|
|
VINTAGE! BENCHTOP DEMAGNETIZER 110V MACHINIST MECHANIC TOOL 6-3/8" x 6-3/8"
ALL YOUR AUCTION NEEDS START@ THEPLACETOBUY1984! The Item You Are Bidding On Is a Bench Top Demag Appears to be LW Brand. The Power Cord Is Broken but Still Works(See Pics) Item Is Tested And Working. Item Specifications: Plate Dimensions: 6-3/8" x 6-3/8" Overall Dimensions: 8" x 8" x 6-3/4" Electrical Specifications: Phase: Single Volts: 115 ITEMS COME AS SHOWN IN PICTURES. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. BEFORE PAYING. PLEASE ASK FOR SHIPPING DISCOUNT ON MULTIPLE ITEM PURCHASE. ALSO, PLEASE E-MAIL OR PM IF YOU HAVE QUESTIONS OR CONCERNS ON SHIPPING& HANDLING. How to Request an Invoice so Shipping is Correct and Up To Date: 1. Click COMMIT TO BUY 2. DO NOT CLICK PAY NOW 3. Go to Ebay Summary. Under PURCHASES ... more4. Select MORE ACTIONS 5. Select REQUEST TOTAL. Shipping on Multiple Items: You Will Get Charged For The Most Expensive Item You Purchased. Extra Items 2-5 get a 30% Discount Per Item. Items 6 or More Get a 45% Discount per Item. Thank You For Looking And Good Luck Bidding!
|
|
|
1 USED SPEEDLINE MODEL 747, 5 TON, TOGGLE BENCHTOP WIRE TERMINATING PRESS
1 Used Speedline Pressurematic Model 747. 5 Ton, Toggle Wire Terminating Press. Serial No. 73-35 1/3 HP. 110 Volt, Single Phase New Motor General Information On Press From The Manual: Tonnage: 5 Tons Stroke: 1-3/8" Shut Height: 4-3/4" Bed Size: 6" X 8" Clutch: Hilliard Single Rev Roll Type Clutch Actuator: Electrical Impulse Foot Switch Press Weight: 220 lbs. we weighed the press) Press Height: Approx. 24" Press Width: Approx. 12" Press Depth: Approx. 20" This press was manufactured in 1973 by Diamond Die and Mold of Mt. Clemens. MI. Diamond is still in business, are a super company to work with and still carries some parts for the 747 presses. We have two 747 presses that we are selling both on eBay and locally and reserve the right to end either sale early if they sell locally. Please note that these two ... morepresses are NOT being sold as a lot of 2. They are being sold SEPARATELY. We have had these presses a long time. Buying them for wire terminating. After the jobs ended we put these two presses in storage in case we needed them again. We are now selling them. We cleaned and painted the press, put on a new electric motor and are selling it in AS IS condition. Please see photos for press condition and to see it run, please click the link to the YouTube video clips we took demonstrating the press running. This press can be either picked up or shipped via common carrier. The BUYER must arrange and pay for ALL shipping costs on the press. If it is being picked up we will put it on a light skid and stretch wrap it at no cost. If it is being shipped we will CRATE it and load it on a truck for $75 over and above the selling price. Please Note: when getting shipping estimates for the press you will need the following information. But keep in mind this information is estimated, we will not build a crate UNTIL it sells so we can only give you estimates of size and total weight to obtain shipping estimates. Your final price CAN differ from the estimate you receive: The item is a used press
|
|
|
IDEAL BENCHTOP DEMAGNETIZER - #13-001.C
Made in the U.S.A. by Ideal Industries Inc. This is a Benchtop Demagnetizer in good condition. Model# 13-001.C SPECIFICATIONS: Surface Area: 5" x 8-5/8" Electrical: 115 Volt. 5 Amp, 50-60 Hz, Single Phase Overall Dimensions: 10" x 5-1/2" x 4" high Comes exactly as shown in pictures.
|
|
|
RF-45 Size CNC Benchtop Mill (Lathemaster)
Well maintained and recently upgraded ten year old Lathemaster ZAY 45 Manual Mill converted to CNC as follows: Controls. Nema 34 Servos with Gecko 320 amps. PMDX126 break out board with ESS smoothstepper. PMDX spindle speed control. Atom computer running with Mach 3. Spindle. 3 HP 3 phase motor 3400 RPM. With Hitachi VFD. Running at max 6000 but most likely can be clocked with VFD to higher speed. Direct Drive system just installed with new bearings. R8 collets(not included) Spindle shaft has been threaded for a top had required for the power drawbar design most used today. Oiler. 1 shot on ways and on screws with flow control valves. Counter balance on z axis using pulleys. Cable and weights. New metal stand with epoxied plywood catch pan for the installed flood coolant system. Temp enclosure using shower curtains installed at this time. ... moreLathemaster manual mill documents and Mach 3 Manual included. 6 inch Vice included. What it needs is tuning up. Mechanicals adjusted and if desired, upgraded ball screws that were not available when I did this conversion but can be purchased readily on ebay. My reason for selling is I'm starting a business and will purchase a commercial machine. Local pickup only and is located at SC zip 29349(Inman) Lake Bowen only. Have motor lift for loading onto small trailer or truck.
|
|
|
IDEAL 45-152 BENCHTOP AUTOMATIC WIRE PREPPER MACHINE
Unit powers on. Has not been tested. This item is part of a liquidation sale of a shop that went out of business. We are liquidators. Not users of this machine. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14516a7e737-0x100-
|
|
|
10725 DEFIANCE VTX-1 CNC Graphite Milling Machine, Benchtop, 45000rpm, 1998
1998 Defiance Model VTX-1 High Speed CNC Graphite Milling Machine. Asset# 10725 The machine is currently in a plant and under power. Please call to set up an inspection. Specifications: Table Size. 20" x 8" Travels. 12" x 8" x 9" Tool Taper. ISO 10 Tool Changer. 12 Station Spindle Speed. 45000rpm Spindle to Column Distance. 8.25” Programmable Feedrate. 0-660ipm Max. Table Weight. 350lbs. Machine Weight. 750lbs. Features: Creative Evolution Programming Software Computer System Dust Collection System(needs motor) Spindle Chiller Several Tool Holders Specifications and Features are Subject to Buyer Verification Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features ... moreare subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer or certified check. Freight and Shipping: The machine is located near Grand Rapids. Michigan Buyer responsible for rigging costs. We can help arrange it. Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Machine will ship as you see it on a flat bed truck. No crating. Palletizing or containers, etc. We are a stocking dealer of new and used machine tools located in West Michigan and are members of the MDNA and AMEA. We have over 1.000 different manual and CNC machines in stock for both fabrication and metal cutting applications. We are always looking to buy machinery– 1 piece or entire plants Please feel free to call or email us any questions at: Phone: 616-868-1111 Email: sales@vanderzielmachinery.com Vander Ziel Machinery Sales. Inc. 6325 Alden Nash, Alto, Michigan, 49302 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Numberall Stamp and Tool 131A Benchtop Press with Stamps
Numberall manufactures an economical range of bench top presses. Bench top mounting saves valuable floor space and keeps larger presses free for other work. The bench top presses are available in Hand-Operated(Model 131) Air-Operated(Model 131A) and Motorized( versions. Small. Heavy-Duty& Compact, Easily mounted on a workbench, Designed for marking name plates and other flat objects, The Model 131 is hand-operated. By manually pulling the lever. A cam is rotated to create the stamping force. The table would be adjusted so that when the cam rotates to high cam position, minimal effort is required to mark the part. The Model 131A uses an air-cylinder to generate its power. A hand-operated lever valve is pulled toward the operator. This causes the ram to move down to stamp the part. Once stamped the lever valve is released. The ram then ... moremoves to the home position. The Model 131A is a very simple, low maintenance press with very few moving parts. In fact, we do not recommend any spare parts for this machine! The Model 131A can also be adjusted so that any part thickness within the stroke range can be stamped without height adjustment. By simply adjusting the air pressure. The press will stamp to a certain depth. Essentially the press will“stall out” but will not damage the part or press components because the air pressure is lower than standard. An acme screw and nut. Attached below the cast table, regulate depth of stamping. A separate guide rod helps align the table. By turning the acme nut you can raise or lower the table for depth adjustment. The presses feature a short safe 3/16” stroke. Negating the need for external guarding. The Model 131A can be equipped with an optional two-hand trip. Numberall’s standard dovetail shank allows quick changing of marking devices. The same dovetail is used in all of Numberall’s presses as well as the Model 116 Dovetail Adapter. The Models 131. 131A and 133 use the same base casting. Numberall's presses are husky. Cast iron"C" frames for distortion-free stampi
|
|
|
DI-ACRO NO.1 MANUAL BENCHTOP 6" x 16GA PRECISION SHEAR & STAND. PRISTINE!
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Di-Acro No.1 Precision Benchtop Shear& Stand Model: No.1 S/N E-1970 Description: In pristine condition both working& cosmetically. Total time capsule. 1970 manufacture date and looks like it was never used! Original paint! This is the cleanest Di-Acro No.1 we've every had. Includes the stand and fixture top as shown. This machine was well taken care of. Super clean 1-owner machine. Back by our 30-day return privelege. Check out our feedback& bid with confidence! Capacity: 16ga x 6" 12" Backgauge 35 lbs Stand& fixture Manual& Parts List The above information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight ... morecosts. Email us with any technical questions you may have or email with zip for a freight quote. CA residents subject to sales tax. Freight and removal are the responsibility of the buyer. Local Pick-up ok. We will help load small items at no charge Feel free to contact us TOLL FREE@ 888-440-4460 or Email Us( We are conveniently located@ 2430 Cypress Wy. Fullerton. CA 92831 Hours: M-F 7:30AM- 4:30PM Saturday by appointment only GENERAL TERMS: By Purchasing equipment from Rohner Machinery Sales. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICES: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. Any taxes shall be paid by the buyer in addition to the quoted purchase price. DELIVERY DATES: While every effort will be made to meet quoted or verbal delivery dates. Those dates are estimated target dates only. Date of delivery is not guaranteed as those delivery dates are necessarily subject to fire, strikes, or labor trouble, storms, acts of governmental authority, acts of public enemies, freight embargo, acts of God, and the like. ACCEPTANCE: All proposals and acce
|
|
|
RARE Vintage Metal Hobby Lathe 1976 15" Wood Base Machine Turning Tool Benchtop
UP FOR SALE IS A BEAUTIFUL CONVERSATION PIECE/ DISPLAY Metal Lathe w/ 4" chuck and 15" bed(has a 3" 3 jay chuck on it at the moment) This is a very rare piece circa 1976 made by TAIG out of california. I was able to find an add for it from a back issue of popular mechanics(second to last picture) and what was left of the manufacturers label that was under the bed when I removed it from the base(third to last pic) This was a passion project for me that I was about half way through reconditioning. It is missing a few parts namely the handle and gear to traverse the bed in the x axis. As well as the drive belt but that can be replaced with any standard fan belt. Please feel free to ask any questions. THANKS FOR LOOKING. Please review photo's carefully. SOLD AS-IS. Its missing the belt and the traveler gear and handle to move ... morethe bed in the x axis. Has been partially reconditioned. May be missing other parts as well. What you see is whats included. Motor runs and on/off switch works. motor sounds like bearing may be missing a ball or two, makes a little click when it starts up but otherwise runs well and smooth, I believe it is a 1/4 horse power motor but I may be wrong. all parts in photo are included but I'm not 100% sure that all of them are for this machine. Just what came with it when I purchased it years ago. Would make a great CNC conversion project. Auction is set to end Sunday night. Don't lose this great and very unique item to a bid sniper, bid early and bid often! Shipping is free but Please keep in mind it will still cost me a great deal of the starting price to ship it so please bid accordingly. Machine may be partially disassembled for shipment. ie. I may have to unbolt the bed from the wood base. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14b3ce62aa0-0x11a-
|
|
|
Hyprez Lapping System 15 LM 115 V - 15LM115V - Benchtop Lapper Lap Machine
Hyprez Lapping System Hyprez Lapping System in fully functional used condition. Model 15 LM 115 V and comes with everything shown. Shipping: Shipping costs will depend on location. Please contact us for shipping costs prior to bidding. Local pickup in Rochester. NY 14606 is free The buyer can set up freight themselves($50 packaging fee added to total) or we can provide a competitive quote to the buyer. Shipping weight 520 lbs. International Buyers– Please Note: International packaging of these items will be $300 for crating Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company ... moreor collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. All others will be charged according to their location Sales tax of 8% will be charged to New York State residents and business's. We at eTech Surplus strive to honestly and accurately describe each item we sell. Please feel free to contact us with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14b50a4661e-0x106-
|
|
|
Preasure Blast Manufacturing Inc Vintage Benchtop Model 179. sand/bead blaster
Bought this at a yard sale. It works fine when hooked up to air. The hole in the back is for a vacuum/filter. Gloves are in good shape The light works. It does leek around the door and could use some silicone. great for an old school shop
|
|
|
Femi NG160 Benchtop Horizontal Variable Speed Band Saw
You are bidding on a slightly used saw. There is nothing wrong with this saw and it functions like a new saw. I have only had it for a couple of months and am looking to purchase the ABS model. There are a few minor scratches in the handle by the trigger. I also replaced one of the adjustable handles for the clamp to lock down the miter swivel with a stainless steel handle instead of getting another plastic one. The saw does not come with the Dewalt miter saw stand or brackets shown in the photo. I left it on the stand to show how I have used the saw. Specifications: Type: benchtop• Motor: 2.7 hp. 110 volt• Blade Width(inches) 500• Blade Length(inch) 68.25• Blade Thickness(inches) 025• Number of Speeds: variable• Speed(s) 98.5-262.5 feet per minute• Vise Opening Max(inches) 6.25• Mitering Range: 45 degrees right• Round Solid Capacity 90 Deg(inches) ... more6• Round Solid Capacity 45 Deg(inches) 4• Round Tube Capacity 90 Deg(inches) 6• Round Tube Capacity 45 Deg(inches) 4• Square Tube Capacity 90 Deg(inches) 6• Square Tube Capacity 45 Deg(inches) 4• Rectangle Tube Capacity 90 Deg(inches) 6-1/4 x 5-1/4• Rectangle Tube Capacity 45 Deg(inches) 4-3/4 x 4• Weight(pounds) 77• Dimensions(LxWxH) 38 x 13 x 22 Free ground shipping in the Continental US or you can upgrade to faster shipping at your expense. This is located in Jackson Hole Wyoming and is also available for local pick up. Thank you for looking. Please contact me with any questions you have. Happy bidding!
|
|
|
GCI Industrial Torque / Balance Arm pneumatic lift tool holder & benchtop post
GCI Torque arm originally from the closed down Ford Ranger Plant here in MN. Originally held an electronically controlled torque wrench for Assembly of components. You could fit many different tools into the tool mount. If it doesn't fit or you need another angle. You can remove the tool mount and make your own to fit multiple different tools. GCI's recommendations: Max weight: 10lbs. Max torque: 50lbs, Max Air: 100lbs, although theoretically these could be exceeded, but it would decrease the life of the bushings and the O-rings, both of which are replaceable/repairable if the need arises. The individual components are rated much higher than GCI's recomendations. Includes: Heavy Duty 6.2amp Milwaukee Drill(If the drill is not needed or wanted. Message me and I will give a $60 refund for not including it in the sale) GCI Torque ... moreArm Part# M3-54607 outward reach is about 40" from post to the drill chuck center. and about 20" of up and down movement not including adjusting its position on the post. Steel Post w/ welded Cap and Base. Adjustable height via U-bolts. Post: 2-3/8" wide, 3/16" thick walls, 34-1/4" high Base: 6"x 6" with 4" x 4" mounting pattern, 1/4" thick plate steel. 250 psi Parker Pneumatic Cylinder Part# WD410784 SMC Precision Regulator Part# IR1020-N01 Made in Japan. Output Pressure 1.4- 120 psi 300 psi Chemical Resistant Coiled Pneumatic Hose with Swivel fittings and standard 3/8" connector. Of course the clamps. Lathe and anything else not mentioned above, is NOT included in the sale. If you have any questions, I am happy to try and answer in a timely fashion.
|
|
 |