|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Fort Mill, United States 60 - 7000 RPM. Spindle Speed. Travelling Column Design. 15 / 10 / 7.5 HP AC. Manufacture Date March 1995. Helical Interpolation. Rigid Tapping. RS-232C ... moreInterface.
Buy It Now
Condition: Used Location: Fort Mill, United States Chip Conveyor (Rear Left Side Exit Hinge Type). Spindle Speed. 24 Position Side Mount Tool Changer. Manufacture Date November 2011. Three Color Tower ... moreLight. Remote Jog Handle. Table Load Capacity. Rigid Tapping.
Buy It Now
Condition: Used Location: Fort Mill, United States 40 - 10,000 RPM. Chip Conveyor. Manufacture Date October 2016. Machine Weight. Spindle Speed. 30 Position Side Mount Tool Changer. Spindle Taper Cleaner. ... moreSurround Tool Coolant.
Buy It Now
Condition: Used Location: Fort Mill, United States Spindle Speed. Heavy Duty Box Way Construction. Rigid Tapping. 3.5" Floppy Disc Drive. Graphic Display. Rapid Traverse Rates (X&Y/Z). Table Size. Table ... moreLoad Capacity.
Buy It Now
Condition: Used Location: Fort Mill, United States 60 - 8000 RPM. Spindle Speed. 20 Position Sidemount Tool Changer. Max Tool Length. 5.9" - 24". 1.8 / 7.5 Seconds. 29.9" x 14.96". Table Size.
Buy It Now
Condition: Used Location: Fort Mill, United States Rigid Tapping. 10,000 RPM. Spindle Speed. Max Tool Length. Max Tool Weight. High Speed CPU. Spindle Nose to Table Top. Rapid Traverse Rates.
Buy It Now
Condition: Used Location: Fort Mill, United States 0 - 8000 RPM. Spindle Speed. 90 ft. lbs. 20 Position Automatic Tool Changer. Rigid Tapping. RS 232 Port. 6.1" - 26.1". Table Size.
Buy It Now
Condition: Used Location: Fort Mill, United States 25 - 6000 RPM. Machine Weight. Chip Conveyor (Right Side Exit). Spindle Speed. 25 / 20 HP AC. Manufacture Date January 1993. Integral Spindle Motor with ... moreTwo Electronic Gear Ranges. Conversational Programming.
Buy It Now
Condition: Used Location: Fort Mill, United States 12,000 RPM. Turbo Microfine Chip Conveyor (Rear Left Exit). Spindle Speed. Manufacture Date February 1999. 3.9" - 24". 30 / 24.8 HP. 60 Position Tool ... moreMagazine. PC/MCIA Interface.
Buy It Now
Condition: Used Location: Fort Mill, United States Spindle Motor. Spindle Torque. Spindle Nose to Table Top. Spindle Speed. Spindle Taper. High Torque Spindle. Full Enclosure. 5" - 35.5".
Buy It Now
Condition: Used Location: Fort Mill, United States Chip Conveyor (Left Side Exit). 40 - 10,000 RPM. Machine Weight. Spindle Speed. Ethernet Connection. Table Load Capacity. Coolant Wash Down System. Through ... moreSpindle Coolant.
Buy It Now
Condition: Used Location: Fort Mill, United States 15,000 RPM. Manufacture Date November 2014. Spindle Speed. (146) Tool Matrix Style Magazine (Expandable). (12) Pallet Fastems Pallet Ace C-1000 Base System. ... moreSpindle Chiller Unit. Rigid Tapping. Extended Capacity Drain Tank.
Buy It Now
Free Shipping Condition: New Location: Stuart, United States Use When Drilling, Milling, Threading, Broaching, Boring, Turning, Tapping, Engraving, Reaming Or Sawing. RELTON 04Z-NRT Rapid Tap Cutting and Drilling ... moreFluid, 4 oz. Flash Point: 176 Degrees Celsius. Improves Surface Finish, Machining Accuracy And Tool Life.
Buy It Now
Condition: Used Location: Fort Mill, United States Mayfran Chip Conveyor (Right Side Exit). Travelling Column Design. Machine Weight. Spindle Speed. 15 / 10 / 7.5 HP AC. Manufacture Date March 1995. Max ... moreTool Length. 4.3" - 24.4".
Buy It Now
Condition: Used Location: Fort Mill, United States 20,000 RPM. 6.9" - 27". Chip Conveyor (Left Side Exit). Spindle Speed. 1000 Blocks / Second Feedrate. 500 Block Look Ahead. 30 Position Side Mount Tool ... moreChanger. Rigid Tapping.
Buy It Now
Condition: Used Location: Fort Mill, United States Two Speed Gearbox. Spindle Speed. 80 Gallon Coolant Tank. 30 Position Side Mount Tool Changer. Manufacture Date November 2006. 12" Color CRT. Coordinate ... moreRotation & Scaling. Rigid Tapping.
Buy It Now
Condition: Used Location: Fort Mill, United States Chip Auger. 0 - 7500 RPM. Machine Weight. Spindle Speed. Mfg Date May 1998. Two Color Tower Light. 118" x 110" x 119.5". Max Tool Length.
Buy It Now
Condition: Used Location: Fort Mill, United States 1998 LEBLOND MAKINO A-77. Spindle Speed 20 - 18,000 RPM. Chip Conveyor (Right Rear Exit). Remote Manual Pulse Generator. Spindle Motor 40 / 30 HP AC. ... moreSpindle Taper Cat 50. Rigid Tapping. Helical Interpolation.
Buy It Now
Condition: Used Location: Decatur, United States Brother CNC TC 321 Drill/ Tap Machine Auto Pallet Changer- BT-30 taper- 6000 RPM- 2) tables. 14" x 12" X travel= 28" Y travel= 12" ... moreZ travel = 10" 10 station ATC- 2 stations not functioning, arms broken) CNC 500 conversational programming. Machine dimensions: 96"L x 76"W x 96"H- Machine weight 7000 lbs. vises in video not included) PARTS FOR 1 STATION ON ATC AS SHOWN IN PICTURE) Watch machine running. Click link below. Programming. Maintenance, Parts list, manuals included. RIGGING(LOADING) SHIPPING COST IS THE RESPONSIBILITY OF THE BUYER! Call CNC Digital for more info. 440-263-1878 SUBJECT TO LOCAL SALE. A $500 DEPOSIT IS DUE IMMEDIATELY THRU PAYPAL. BALANCE DUE WITHIN 3 BUSINESS DAYS. ALL CHECKS MUST CLEAR BEFORE MACHINE RELEASE. WIRE TRANSFER PREFFERED. Terms& Conditions of Sale: ACCEPTANCE: Purchasing equipment from CNC Digital. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICE: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. Buyer is responsible for any applicable taxes. SHIPPING: BUYER IS RESPONSIBLE FOR LOADING(RIGGING) AND TRANSPORTATION from F.O.B. point. CNC Digital. Inc. is not responsible for any damage due to weather, rigging, trucking, or any damage involved in transport, loading, unloading or situations beyond CNC Digital, Inc. control. ACCEPTANCE: All Sales are made with the understanding that orders are not subject to cancellation. And that a Payment in Full is REQUIRED prior to machine release. NO WARRANTY: The goods described are pre-owned used goods and are offered"As Is" where is" Seller makes no warranties or guarantees of any kind, either expressed or implied, of merchantability, and fitness for a particular purpose. All specifications, descriptions of equipment should be used as a guide only. It is the buyers responsibility to inspect item(s) and details of machine capabilities prior to bidding or purchase. CNC Dig
Buy It Now
Condition: Used Location: Byron Center, United States Work and Tool Probing System. 2012 Haas VM-2 CNC Vertical Machining Center. Chip Auger. 4th Axis Drive and Wiring. View Phone Number. The machine is being ... moresold "as-is, where-is" with no warranty. Inspections are highly encouraged.
Buy It Now
Condition: Used Location: Byron Center, United States 2015 HURCO VMX64i CNC Vertical Machining Center. Through Spindle Coolant System, Hurco. 64" X-Axis Travel. 34" Y-Axis Travel. 30" Z-Axis Travel. 30 Station ... moreTool Changer. The machine is being sold "as-is, where-is" with no warranty.
Buy It Now
Condition: Used Location: Alto, United States Asset # 14971. Carlton 12’ x 26” Radial Drill, Model 5A. Feed and Tap Leads (18).004” to. 125”. Bearing of Head on Arm 23 1/4”. Arm Length 12’. Traverse ... moreof Head on Arm 10’8”. Bearing of Arm on Column 52”.
Buy It Now
Condition: Used Location: Woodstock, United States Haas Editor. ... Included. - 30 Taper 15,000 RPM Direct Drive Spindle ………………………. - Fourth Axis Ready …………………………………………………….
Buy It Now
Condition: Used Location: Toledo, United States All specifications subject to verification, machine in plant and is under power. Machine has under 500 hours on it. Table Size: 165.3” x 80.7”. Spindle ... moreNose to Table: 5.9” - 47.8”. Table Load Capacity: 22,000 lbs.
Buy It Now
Condition: Used Location: Fremont, United States TRAVELS (X,Y & Z) 82" x 120" x 12". PERFORMANCE MACHINE TOOLS, INC. TABLE WORKING SURFACE 60” x 96”. Hand Held Remote Jog Pendant. MACHINE RAN ALUMINUM ... morewith COOLANT SPRAY MIST SYSTEM. Remote Start Stop Station.
Buy It Now
Condition: Used Location: United States HAAS VF-8/50. Vertical Machining Centers. Horizontal Machining Centers. cnc machines. HIGH-SPEED MACHINING. -Y AXIS: 40". New Arrivals. SPINDLE TAPER: ... moreCAT 50.
Buy It Now
Condition: Used Location: Greene, United States PRECISION WIRE EDM VISE STAINLESS GOOD FOR MILLING. GRINDING, EDM WORK IDEAL FOR PARTS IN EDM MACHINES HARDNESS: 55 RC SQUARE AND PARALLEL WITHIN.0002" ... more11.80" LONG DIMENSIONS JAW WIDTH 1.4" JAW OPENING 8" JAW DEPTH 1.57" THIS IS 440 STAINLESS STEEL QUALITY IMPORT 6 AND 4 INCH VISES AVAILABLE AS WELL. CHECK FOR PRICING SHIPPING IS ONLY $17.99! FOR THE IMMEDIATE 48 UNITED STATES. ALL OTHERS REQUEST QUOTES. THANKS FOR LOOKING AND DON'T FORGET TO CHECK OUT OUR OTHER METALWORKING PRODUCTS AS WELL. PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email matacoinc@aol.com for further information. Shipping and Handling Shipping weight: 13lbs Buyer pays the shipping& handing charge. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Condition: Used Location: Alto, United States We are always looking to buy machinery 1 piece or entire plants.
Buy It Now
Condition: Used Location: Byron Center, United States 2018 Haas ST-30 CNC Turning Center. 135" x 80" x 87" Dim's w/o Chip Conveyor. Chip Conveyor, Belt Type. Part Swing. 3.0" Spindle Bore (per our calipers). ... more12 Station Turret. 9.4" X-Axis Travel. 32.5" Z-Axis Travel.
Buy It Now
Condition: Used Location: Alto, United States Asset # 11559. Drill Capacity Steel C.I. Drill does not have tapping. Approximate height 78”. We are always looking to buy machinery – 1 piece or entire ... moreplants. Clearance between spindle and standard table, min/max max 26-5/32”, min 8-15/32”.
Buy It Now
Condition: Used Location: Alto, United States Asset # 13966. Carlton 8’ x 19” Radial Drill, Model 4A. Feeds and Tap Leads (18). 004” –. 125”. Swing of Arm 10’6”. Vertical Travel of Spindle in Head ... more20”. Drills to Center of Circle 16’. Bearing of Head on Arm 23 ¼”.
Buy It Now
Condition: Used Location: Aurora, United States ONE USED -FADAL 6030HT Vertical Machining Center. 21 Position ATC. CAT 40 Spindle Taper. 28” Extended Column. 60” X Axis Travel. 30” x 62” T-slotted Table. ... more30” Y Axis Travel. 30” Z Axis Travel.
Buy It Now
Condition: Used Location: Alto, United States Asset # 12145. Tap Thread Leads 8, 11.5, 4, 18. Swing of Arm 10’6”. Vertical Travel of Spindle in Head 20”. Spindle Radius 27” – 8’ 1 ¾”. Bearing of Head ... moreon Arm 23 ¼”. Face of Column to Center of Spindle 13 ¼ - 8’.
Buy It Now
Condition: Used Location: Alto, United States Asset # 9871. Carlton Model 5A Radial Drill, 26” x 12’. Feed and Tap Leads (18). 004” to. 125”. Vertical Travel of Spindle in Head 24”. Bearing of Head ... moreon Arm 23 1/4”. Height over Head, Max. Traverse of Head on Arm 10’8”.
Buy It Now
Condition: Used Location: Kenosha, United States Condition is "Used". Approximate Weight 32000 lbs. Loaded on Truck with this price only. MACHINE IN POWER. RS 232 Port & 3.5" Floppy. Rigid Tapping. Remote ... moreJog Handle. 5-AXIS Troyke TDL-15A Trunnion Table.
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website REC#2023. 1) Used 2 Ton Nopack C-Frame ... morePneumatic Press; Mfg. 77-2775 Specifications: Capacity.2 Tons Bed Area.12"x 12" est. Stroke.3" est. Bed.Bed-Tapped Ram.Ram-Tapped 1 3/8" piston. Equipped With: Pneumatic Controls. Pressure Regulator Oiler Air Filter. Tooling(various cup dies) Overall Dimensions.40" L-R x 46" F-B x 38" High(est. with pallet Weight.300 lbs(est. Price.$1.250.F.O.B.Casa Grande, Arizona. Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers) CMM's, parts washers, radial arm drills, drill presses, dust collectors,
Buy It Now
Condition: Used Location: Muskegon, United States Model #: H630. Serial Number: 102444 or 98393 or 101832. Mazak Horizontal Machining Center. Manufacturer: MAZAK. Model: H-630. We have no way of testing ... moreit once it was removed. Date: 6/92 or 6/91 or 1/92.
|
|
|
|
5-60 NS Tap - Machine Shop Quality High Speed Steel HSS
5-60 NS tap manufactured using the highest quality machine shop grade high speed steel. ~ ~
|
|
|
2-80 NS Miniature Tap - Machine Shop Quality High Speed Steel HSS
2-80 NS tap manufactured using the highest quality machine shop grade high speed steel. ~ ~
|
|
|
1-56 NS Miniature Tap - Machine Shop Quality High Speed Steel HSS
1-56 NS tap manufactured using the highest quality machine shop grade high speed steel. ~ ~
|
|
|
7/16-40 NC 7/16" x 14 TPI Bottom Bottoming Tap Machine Shop High Speed Steel HSS
7/16-14 NC bottom tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
1-14 NF 1" x 14 Tap 1"x14 - Machine Shop Quality High Speed Steel HSS
1" 14 NS tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
JAGERMEISTER ICE COLD Shot TAP MACHINE MODEL J99 Bar Mancave Jager
Sweet 3 bottle shot dispenser.works great.light rope works.gets super ice cold.any questions ask before purchase.thanks
|
|
|
JAGERMEISTER TAP MACHINE 3 BOTTLE SHOT JEMUS ICE COLD SHOTS COUNTER BAR
JAGERMEISTER TAP MACHINE 3 BOTTLE SHOT JEMUS ICE COLD SHOTS COUNTER BAR 100% Tested- Excellent Working Condition! Speedy Reliable Transport Right To Your Doorstep! Manufacturer: Jagermeister Function: Bottle Shot Machine Features: Holds 3 Jagermeister Bottle(750ml and 1L sizes Only) Chills Shots to Zero Degrees Farenheight or below freezing temperatures Low Indicator Light Approx. Dims: 11"W x 15"D x 16"H Power Type: Electric 115V. 60HZ, C ondition: This Jagermeister 3 Bottle Shot Machine JEMUS Tap has been tested by our technician and is in excellent working condition. Call Us(214) 780- 0522 4831 Top Line Drive. Dallas. TX 75247 Check out my other items! Be sure to add me to your favorites list! Payment Method We accept payments via PayPal. Shipping Claims· Examine shipment BEFORE accepting from the shipper; In the event ... moreof receiving a damaged shipment please DO NOT accept the merchandise and n otate any and all damages on bill of laden(provided by shipping company) Please allow 3 days after receipt of payment for items to be shipped. Refunds and Returns*BUYER PAYS FOR RETURN* All returns must be approved by Restau Mart. A restocking fee of 15% will be applied to all returns. Warranties All items carry a 30 day warranty. We will supply and work with you on parts replacement. We DO NOT pay for labor. We DO NOT warranty Refrigeration. Guarantees 1. We are competitively priced. 2. Our equipment is tested. Refurbished and corrected for problems. Parts that are failing or showing a promise of failing are replaced before a sale occurs. 3. We offer a 5% discount to repeat customers. 4. Your satisfaction is GUARANTEED If you don’t find an item on our eBay store please call us. We could stock it in our warehouse.
|
|
|
Matco Tools 676TD 76 Pc Machine Screw /Fractional & Metric Tap And Die Set
Matco Tools 676TD 76 Pc Machine Screw/Fractional& Metric Tap And Die Set Product description: Set is used. Tools have some scratches/grease smudges/signs of use. NC and NF threads Sizes no. 4 through 1/2" 3mm-5 to 12mm-1.75 Sold as pictured Shipping and Handling is Calculated Using the eBay Calculator(below) Please note: All items are inspected thoroughly before listing and shipping to be verified that they are as described here. All outgoing packages are inspected thoroughly before shipping to assure that they are packed according to USPS and UPS shipping guidelines. Pictures may be representative of the item and not the"actual" item offered for sale; such is especially the case with"stock" photos. Box art. Manufacturer design and such may vary. All items are sold"as is. We are not experts and product specs ... moremay be unintentionally inaccurate, buyer should research with manufacturer before bidding- no returns for errors of this nature. If you bid, you are entering into a legally binding contract and you agree to our terms. Thank you, and happy bidding! Please read our terms and policies( http:stores.ebay.com/tcspawnco/Our-Policies.html) carefully before bidding. On Jun-13-12 at 08:56:04 PDT. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Sugino V8 CNC Drill/Tap Machine -Indexing Pallet Changer-6000 RPM-milling
SUGINO V8 Drill/ Tap Machine. Model: SCV-822 GTE. Indexing Auto Pallet Changer- BT-30 taper- 6000 RPM- Table area. 19.6" x 11.8" X travel= 11.8" Y travel= 9.8" Z travel = 9.8" 8 station ATC- cnc-300g control. Machine dimensions: 93"L x 65"W x 77"H. Machine weight 3600 lbs. Watch machine running. Click link below. Instruction. Parts list, electrical, ladder, programming, manuals included. SHIPPING COST IS THE RESPONSIBILITY OF THE BUYER! Call CNC Digital for more info. 440-263-1878 Sorry no tool holders or vises included in this sale. Machine loaded onto your flatbed truck for free. Shipping is paid by the buyer. SUBJECT TO LOCAL SALE. A $500 DEPOSIT IS DUE IMMEDIATELY THRU PAYPAL. BALANCE DUE WITHIN 3 BUSINESS DAYS. ALL CHECKS MUST CLEAR BEFORE MACHINE RELEASE. WIRE TRANSFER PREFFERED. Terms& Conditions ... moreof Sale: ACCEPTANCE: Purchasing equipment from CNC Digital. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICE: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. Buyer is responsible for any applicable taxes. SHIPPING: BUYER IS RESPONSIBLE FOR TRANSPORTATION from F.O.B. point. CNC Digital. Inc. is not responsible for any damage due to weather, rigging, trucking, or any damage involved in transport, loading, unloading or situations beyond CNC Digital, Inc. control. ACCEPTANCE: All Sales are made with the understanding that orders are not subject to cancellation. And that a Payment in Full is REQUIRED prior to machine release. NO WARRANTY: The goods described are pre-owned used goods and are offered"As Is" where is" Seller makes no warranties or guarantees of any kind, either expressed or implied, of merchantability, and fitness for a particular purpose. All specifications, descriptions of equipment should be used as a guide only. It is the buyers responsibility to inspect item(s) and details of machine capabilities prior to bidding or purchase
|
|
|
Pulley tap extra long 0.442 x 14 hand threading thread machine shop vintage used
14BE2202 up for sale is a long reach speciality tap marked.442- 14 the total length is 8 inches square drive. There is some dried up tape on it we could not peel off, nice old vintage tap from our warehouse, Seems to be a odd size and pitch? Buyer to pay calculated shipping and packing to your locations. See our store for more items like this click below, we will work with you to save on shipping for multiple item purchases, Thank you RWK Check out my!
|
|
|
8-40 NS Tap Bottom Bottoming - Machine Shop Quality High Speed Steel HSS
8-40 NS Bottom tap manufactured using the highest quality machine shop grade high speed steel. ~ ~
|
|
|
Giddings & Lewis Brickford Radial Drill & Tap Center Mill Milling machine
You Can Reach Us at 610-521-5080 We Will Load For Free on Any Open Trailer Free Shipping Quotes Radial Drill Make: Giddings& Lewis Bickford Machine: Drills& Taps Arm: 4ft 6in Height Under Spindle: 52 in Electric Clamping on column Coolant 5 Hp 230/460 Volts 3 phase 2 Knee Plates- Top surface 20 in X 24 in each This Machine. Is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Machine is being sold as is. The specs on this machine are subject to buyers inspection We have Excellent feedback rating. Our goal is to keep you. Our customers satisfied. We can Deliver this Machine and place it on your shop floor if you are in a 4 hour range from Philadelphia for an additional Fee. We will ... moreLoad this onto any truck or trailer for FREE. Cross country Transportation: You can get a great rate by calling 1-888-651-0566 This is the Trucking company that we use. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Re-locations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up to 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
Boyar Schults 2At Adjustable Tap Holder For Screw Machine Cnc Lathe
Boyar Schults 2AT tap holder for screw machine or lathe. Shank is 1"x2" Free shipping to Canada and the lower 48 states Posted with
|
|
|
SEARS CRAFTSMAN Number Size Drill Gauge 4047 machine screw tap and wire gauge
SEARS CRAFTSMAN Number Size Drill Gauge 4047 machine screw tap and wire gauge. We ship promptly and pack well.
|
|
|
BILZ TYPE TAPPING COLLET FOR 1/2 13 TAP 7 - 341 - 1127 932 MACHINE SHOP TOOLING
YOU ARE PURCHASING THE PICTURED BILZ TAPING COLLET. IT IS USED. IT IS LABELED: 7- 341- 1127 932 PLEASE EMAIL ME ANY QUESTIONS YOU HAVE. I WILL COMBINE SHIPPING WHENEVER POSSIBLE. I WILL SHIP WORLDWIDE. THANK YOU! UL
|
|
|
5/8-11 NC 5/8" x 11 NC Tap - Machine Shop Quality High Speed Steel HSS
5/8-11 NC tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
CNC Mill Grind Drill Tap Router Machine 26"x114"x15" XYZ 3 HP Spindle Metal Work
CNC MILL Grind Drill Tap Router Machine 26"x114"x15" XYZ/ 670mm x 2895mm x 380mm XYZ Working Area 3 HP Spindle Used for about a Month Selling Because no space available for it For questions Please Contact us on EBay T his CNC machine is custom made to typically handle Aluminum work like a milling machine I t was build to grind. Drill& tap on a square aluminum& Plastic tube for other CNC machine parts F ront of machine can have an extra 10" depth clearance under the 15" Z axis clearance to take deeper items like box etc. the working XYZ of the front deep area is X 26"x Y 14" x Z 25" 15" Z and 10" extra clearance) H olding vise are installed on T-Slot square tube T-Slot Tube can be added base on holding need V ise are all expandable to hold up to 26" D rill& Tap motor can be ... moreadded to the machine with fully automated direction and RPM from software Optional items/ That we will add at extra cost High Torque Steel Drilling& Tapping Spindle 3000 RPM 2HP Spindle speed/Direction controlled by software 4 Speed mechanical pulley to increase speed& Torque mechanically If you require more options Please notify us so we can discuss it Strong structure. Heavy base, 10"x 5"x 1/4" Square tube Precision ground Metal Square Tube for rail& Rack High end Electro-Mechanical components Industrial mechanical components linear square rail Precision C5 class rolled ball screw on Z Precision Rack& pinion on XY Micro stepping motors Spindle 3 HP 24000 RPM Mach3 controller Shipping cost below might vary depending on location this is just a close estimate. We might need to get you an exact shipping cost to your postal or zip code. Specifications X. Y, Z Working Area 26"x114"x15" XYZ/ 670mm x 2895mm x 380mm. X. Y, Z Resolution ±0.00016” X. Y, Z Repeatability ±0.0018" X. Y, Z Transmission System Z Ball Screw 25mm. X Y Rack& Pinion with 10:1 Gear Box XYZ Slide System High Precision Linear Square Guide Way 25mm Elec
|
|
|
Irwin Tools 26377 117 Piece Machine Screw/Fractional/Metric Tap and Hex Die Set
You are bidding on a slightly used Irwin Tools 26377 117 Piece Machine Screw/Fractional/Metric Tap and Hex Die Set with Drill Bit Set. Only 2 taps were ever used once and several drill bits and extractors were used. Set is in excellent condition. Free shipping to US 48 Contiguous states only.
|
|
|
GIANT 1 1/4" EMUGE TAP COLLET EM05-U-1 1/4" COMPRESSION MACHINE SHOP TOOLING
YOU ARE PURCHASING THE PICTURED TAPPING COLLET. IT IS USED. GOOD CONDITION. IT IS LABELED: EMUGE EM05-U-1 1/4" F0575327 D7 MADE IN GERMANY HOLDS A 1 1/4" DIAMETER TAP. THIS COLLET WEIGHS 8 POUNDS! LISTING ANOTHER OF THESE 1 1/8" DIAMETER. PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES! I SHIP(95% OR MORE) OF MY LISTINGS SAME DAY AS PAID IF PAID BY 4:00 P.M. EST. IF YOU MUST HAVE YOUR ITEMS SHIPPED SAME DAY PLEASE EMAIL OR CONTACT ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. I WILL COMBINE SHIPPING. I WILL SHIP WORLDWIDE. THANK YOU! LL MD7591513
|
|
|
JAGERMEISTER J99 TAP SUBZERO DISPENSING BAR MACHINE WITH ACCESSORIES
Used Jagermister Machine. Comes with manual and accessories shown in picture. Rare Jager shot glasses included.
|
|
|
* S1262 10x24 UNC spiral point machine TAP used good condition
+C+ Reference: S 1262 Quantity: 1 off Description: 10x24 UNC tap Several other sizes and stages(cuts) are available from our Full Length: 68mm Length of threaded part: 28mm Brand: Lyndon. England Condition: Used. Good(7 out of 10) Material:HS Weight: 6g + Packaging.
|
|
|
* S1281 3/8 BSW Galtona spiral point machine TAP used good condition
+C+ Reference: S 1281 Quantity: 1 off Description:3/8 BSW tap Several other sizes and stages(cuts) are available from our Full Length: 74mm Length of threaded part: 25mm Brand:Galtona Condition: Used. Good(7 out of 10) Material:HS Weight: 30g + Packaging.
|
|
|
Davenport Tool Holders Drill & Knurl also Somma Tap Holder Screw Machine Tooling
This auction is for one lot of Davenport Screw Machine and Somma tool holders 4 Holders total What you see in the pictures is what you will receive There are 2 Davenport#3096 Self Centering Holders Both in like new condition The Knurl Holder is a Davenport#2729 It's in used but still usable condition. Some nicks and grind marks The Tap Holder is a Somma R&L Non Releasing Style It's in great shape but does have a flat milled on the shank for a set screw hold All end holder shanks are 3/4" and take a standard 5/8" bushing Thanks for looking
|
|
|
Jagermeister Shot Machine Jager Tap Model JEMUS (Local Pick up Denver Co)
THIS ITEM IS FOR LOCA PICK UP ONLY DENVER AREA Anyone wanting this item shipped the cost will be a charge of 150.00 in the(USA 48 States) Machine works great! Minor damage. Deep scratch on side, Missing drain tray! seller out of town NO shipping before 2/28 On Jan-06-14 at 16:44:17 PST. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
2 huge tap & die sets blacksmith machinist tapping drilling machine shop tools
Estate find. Huge lot of tap and die, it does not look complete but does look to have lots of extra parts, weighs over 30 pounds, for parts or repair, AS IS AS SHOWN. Please see my other auctions for a huge collection of machinists inspection lathe tooling. Vintage and antique from a closed machine shop, we will also have more machinists lots from the same estate next week. Please note wood stand in pictures is for display only and not included. We will be liquidating a large estate consisting of military items. Woodworking tools, automotive tools, machinists tools, mechanics tools, collectibles, antique and primitives and more. Please put us in your favorites you will not be disappointed. Please note. Unless noted as new, the items I am auctioning are old and/or used. Because of this, they are sold AS IS, as found, the same as in any other ... moreauction. I will try to describe these items to the best of my ability and would not misrepresent anything intentionally. I list the defects, problems and imperfections I see on the items, but I can sometimes miss something or make a mistake. I will admit that I am not an expert on everything I sell so please look at the pictures for condition and e-mail me with any questions before bidding. I try to answer every question asked, but cannot guarantee an answer if you ask the day the auction ends. You must be 18 to purchase knives. INTERNATIONAL BUYERS PLEASE E-MAIL FOR SHIPPING COST BEFORE BIDDING. PLEASE CHECK WITH YOUR COUNTRIES SHIPPING RESTRICTIONS BEFORE YOU BID. WE WILL NOT BE RESPONSIBLE IF ITEMS CANNOT BE LEGALLY SHIPPED TO YOU. ALSO PLEASE DO NOT ASK US TO SHOW AS A GIFT OR MISREPRESENT THE CONTENTS OR VALUE. WE WILL NOT! Please see the shipping calculator. E-bay is now charging fees on the shipping also, I normally ship via USPS or UPS. We have a handling/packaging charge of $5.00 included in our shipping charges(this is not your total shipping, you must see the shipping calculator or flat rate shipping in the item description)Our $5.00 covers packaging material and
|
|
|
Brother CNC TC 321 Drill/Tap Machine -Auto Pallet Changer-6000 RPM-milling
Brother CNC TC 321 Drill/ Tap Machine Auto Pallet Changer- BT-30 taper- 6000 RPM- 2) tables. 14" x 12" X travel= 28" Y travel= 12" Z travel = 10" 10 station ATC- 2 stations not functioning, arms broken) CNC 500 conversational programming. Machine dimensions: 96"L x 76"W x 96"H- Machine weight 7000 lbs. vises in video not included) PARTS FOR 1 STATION ON ATC AS SHOWN IN PICTURE) Watch machine running. Click link below. Programming. Maintenance, Parts list, manuals included. RIGGING(LOADING) SHIPPING COST IS THE RESPONSIBILITY OF THE BUYER! Call CNC Digital for more info. 440-263-1878 SUBJECT TO LOCAL SALE. A $500 DEPOSIT IS DUE IMMEDIATELY THRU PAYPAL. BALANCE DUE WITHIN 3 BUSINESS DAYS. ALL CHECKS MUST CLEAR BEFORE MACHINE RELEASE. WIRE TRANSFER PREFFERED. Terms& Conditions of Sale: ACCEPTANCE: ... morePurchasing equipment from CNC Digital. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICE: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. Buyer is responsible for any applicable taxes. SHIPPING: BUYER IS RESPONSIBLE FOR LOADING(RIGGING) AND TRANSPORTATION from F.O.B. point. CNC Digital. Inc. is not responsible for any damage due to weather, rigging, trucking, or any damage involved in transport, loading, unloading or situations beyond CNC Digital, Inc. control. ACCEPTANCE: All Sales are made with the understanding that orders are not subject to cancellation. And that a Payment in Full is REQUIRED prior to machine release. NO WARRANTY: The goods described are pre-owned used goods and are offered"As Is" where is" Seller makes no warranties or guarantees of any kind, either expressed or implied, of merchantability, and fitness for a particular purpose. All specifications, descriptions of equipment should be used as a guide only. It is the buyers responsibility to inspect item(s) and details of machine capabilities prior to bidding or purchase. CNC Dig
|
|
|
Antique Shoe Repair Tool Tap Scarfing Machine United Shoe Repair Co 1920's circa
Antique Shoe Repair Tool Tap Scarfing Machine United Shoe Repair Co 1920's circa Offered at auction. A very old and unique shoe repair tool(circa 1920's) a tap scarfing machine made by United Shoe Repair Co. of Boston MASS. This was found in seller's uncle's home outside of Boston, probably in storage for over 70 years. This is ALL ORIGINAL and in very good condition. Does show some wear as you would expect from use. We have an advertisement from 1921 about this shoe repair tool- cost $25 then and was advertised to save time and money! Made of cast iron(the frame) with a steel cutting blade. There are multiple angle cutting positions; the locking knob sets the angle positions. Excellent collector piece for display in anyone's home or related industry office! Dimensions: Frame including handle: 20" long 5 1/2" ... morehigh in closed position and 6" wide Steel cutting blade: 8" long 1 5/8" wide 1/8" thick Weighs in at 13 lbs. 8 oz. which is why it costs so much to ship) Again. Being sold by the current owner(not reseller) who is downsizing antique/vintage tools and collectibles- see other items. Buyer feedback is testimonial to this seller's commitment to meet and exceed buyer expectations- check mine out! Email with questions.
|
|
|
Jagermeister Tap Machine - 3 Bottle Jager Shot Machine - ICE COLD JAGER SHOTS
JAGERMEISTER TAP MACHINE Dispenses J ager Shots"Colder Than Ice. Between 5 ° F& 15 ° F) When Maintained Properly This is an industrial dispenser built to hold 3 bottles of Jager. Would be a great party starter for bar. Man-cave, patio/outdoor bar(must be protected from elements) Automatically a conversation starter and display piece. Dimensions: 11"W x 15"D x 26"H Weight: 50 lbs. Contents: Original Operator's Manual 3 Bottle Stoppers Drip Tray Extra Lighting Strip Holders. Missing plastic piece by spout. Payment Terms: Payment must be received within 3 days of sale. I accept Paypal only. I will not sell to anywhere outside of the Contiguous U.S. as I do not ship outside of there. Violating these rules will void the transaction. Shipping: This item is heavy. Its weight plus packaging will weigh more than ... more50lbs. Shipping is costly for this item because of weight and needing to protect it. Your item will be shipped well-wrapped with plastic wrap. Bubble wrap. Envelope(s) Etc. I will not ship to anywhere outside of the Contiguous U.S. Violating this rule will void the transaction.
|
|
|
SET OF 2 VINTAGE BUNN COFFEE MAKER MACHINE NO DRIP WATER TAP TAPPERS FAUCET
SET OF(2) NO-DRIP COFFEE MAKER WATER TAPS/FAUCETS USED- TESTED- WORK FINE THESE WERE SPARE TAPPERS FROM A BUNN COFFEE MAKER THAT I NO LONGER OWN. THEY WERE TESTED; WORK AND LOOK GREAT. THEY ROUGHLY MEASURE 2-3/4"L x 2"H. THE THREADED NIPPLE IS 3/8" OD x 1/4"L. WILL COMBINE SHIPPING- PAYP AL- TRACKING INCLUDED
|
|
|
WASHING MACHINE HOSE WITH BOTH SCREW TAP AND MACHINE FITTINGS 4' LONG GREY
This hose is 4' long and is grey in colour with red fittings. It is used but in excellent condition. It has printed on it: Type 103 10 Bar at 25deg C 1.5 Bar at 60deg C Hot.
|
|
|
WASHING MACHINE HOSE WITH BOTH SCREW TAP AND MACHINE FITTINGS 4' LONG BLUE
This hose is 4' long and is blue in colour with white fittings. It is used but in excellent condition. It has printed on it: Type 103 10 Bar at 25deg C 1.5 Bar at 60deg C.
|
|
|
Scarce Antique Firehouse Fire Department Ticker Tap Machine - Estate Fresh Find
Up for sale here is a Antique Ticker Tape machine from a old firehouse. The machine is in good condition and shows little signs of ware. The clockworks appear to be in great condition and work well when the machine is actuated manually. The spring winds up just find. The brass case is in good condition. The machine appears to be all original and in good working condition, though I do not know how to use, or test these machines, so I can only a test to how it looks cosmetically. Please look over the photo's to tell for yourself the true quality and condition of this great piece of fireman's history! There are no markings on the case to resemble a brand or makers mark aside from a patent number on the base and arm that holds the tape. The pat. numbers read as follows: Arm" P-29519-P1" Base"P-29514-P1"
|
|
|
Miyano CNC TSV-C35 Drill/Tap Machine -Auto Pallet Changer-8000 RPM-milling VMC
Miyano TSV-C35 Drill/ Tap Machine. Indexing Auto Pallet Changer- BT-30 taper- 8000 RPM- Table area. 18.9" x 14.17" X travel= 15.75" Y travel= 11.81" Z travel = 9.84" 10 station ATC- Yasnac i80-MB control. Machine dimensions: 95"L x 60"W x 90"H. Machine weight 5500 lbs. Watch machine running. Click link below. Instruction. Parts list, manuals included. SHIPPING COST IS THE RESPONSIBILITY OF THE BUYER! Call CNC Digital for more info. 440-263-1878 Sorry no tool holders or vises included in this sale. Machine loaded onto your flatbed truck for free. Shipping is paid by the buyer. SUBJECT TO LOCAL SALE. A $500 DEPOSIT IS DUE IMMEDIATELY THRU PAYPAL. BALANCE DUE WITHIN 3 BUSINESS DAYS. ALL CHECKS MUST CLEAR BEFORE MACHINE RELEASE. WIRE TRANSFER PREFFERED. Terms& Conditions of Sale: ACCEPTANCE: Purchasing ... moreequipment from CNC Digital. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICE: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. Buyer is responsible for any applicable taxes. SHIPPING: BUYER IS RESPONSIBLE FOR TRANSPORTATION from F.O.B. point. CNC Digital. Inc. is not responsible for any damage due to weather, rigging, trucking, or any damage involved in transport, loading, unloading or situations beyond CNC Digital, Inc. control. ACCEPTANCE: All Sales are made with the understanding that orders are not subject to cancellation. And that a Payment in Full is REQUIRED prior to machine release. NO WARRANTY: The goods described are pre-owned used goods and are offered"As Is" where is" Seller makes no warranties or guarantees of any kind, either expressed or implied, of merchantability, and fitness for a particular purpose. All specifications, descriptions of equipment should be used as a guide only. It is the buyers responsibility to inspect item(s) and details of machine capabilities prior to bidding or purchase. CNC Digital, Inc. reserves the righ
|
|
|
whiskey shot tap machine chiller cooler liquor dispenser fireball jagr patron
Hello bidders. Here is a used. But in very good condition shot dispenser made by"So Cold. Got a great deal on some cases from our liquor representative-decided to get one of these to go with(has Early Times knock off of Fireball logo"Fire Eater" Everything works as it should. Including the light, the lighted power switch, and the product is a guaranteed NSF approved product, top of the line. It comes with everything shown in the pictures, which is 3 bottle taps(all with a white plastic ball the depresses in to control flow) and a lid dispenser with two holes(for two bottles) There are lids with three holes available to use three bottles at once. This one is set up and ready to go for two bottles(and you can have a third bottle tapped and ready for back up) All equipment has been cleaned and is in great shape, including the ... moretap(see pic for condition) It was used for a very short time but was replaced by a different machine. We discontinued the liquor and this has to go. It has a very sensitive radiator on the back. And that is the only thing that keeps it from being in like new condition. One of the bartenders pushed it into something. I straightened the grill as best as I could, and there is some sticky run off that has dried up just under the radiator. Not much, and did not interfere with the operation, and very difficult to get to without messing up the radiator. I will leave it up to the new owner to decide what to do there. I will protect it well in shipping. Makes any liquor you put in to a chill 28 degrees. Perfect for giving people super cold shots(esp of fireball. Jager, anything served chilled esp tequilas like Patron) We had Fire Eater in it but I cleaned it out very well. It has dried completely and been stored in my own kitchen. Any questions at all don't hesitate to ask. Your offer price includes shipping to anywhere in the Continental United States(which keep in mind is not going to be cheap-it weighs about 30 pounds or so) So yes no international shipping the is for CONTINENTA
|
|
|
7/8-9 NC 7/8" x 9 Tap - Machine Shop Quality High Speed Steel HSS
7/8"9 NC tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
5/8-18 NF 5/8" x 18 TPI Bottom Bottoming Tap - Machine Shop High Speed Steel HSS
5/8-18 NF bottom tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
3/4-10 NC 3/4" x 10 NC LEFT hand Tap - Machine Shop Quality High Speed Steel HSS
3/4"10 LEFT HAND tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
3/32-48 NS 3/32"-48 Tap - Machine Shop Quality High Speed Steel HSS
3/32-48 NS tap manufactured using the highest quality machine shop grade high speed steel. ~ ~
|
|
|
Lot of # 4 Tap Guides for Mill/Lathe Machine Tool & Die Work
For sale a lot of# 4 Tap Guides for Mill/Lathe Machine Tool& Die Work in excellent condition: 1) Pair of Stainless Steel Block-Guides in picture# 2 are 6' long for 5/8' work. 2) Stainless Steel Guide with 3/16' groove. 3) Multi-Size and Dimensional Guide with inserted guide-threads. Comes from my Grandfather's collection-Ships for Free thanks for your attention!
|
|
|
HSS tap BSP 1" TPI 11 Parallel bottom machine shank OD: 1 1/8" TEC
For sales is 1 pcs good working condition HSS Hand tap. Size: BSP 1" TPI: 11. Parallel. bottom. 4 flutes. With machine shank OD 1 1/8" Welcomed to ebay shop- toolingstation combined postage provided 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-144a00d046e-0xf6-
|
|
|
NICE NEW ? 1" 8 NC HS G4 4 FLUTE TAP HANSON WHITNEY MACHINIST MACHINE SHOP
HELLO- YOU ARE PURCHASING THE PICTURED TAP. WE THINK IT IS NEW BUT HAVE LISTED IT AS USED BECAUSE WE ARE NOT SURE. WE SEE NO SIGNS OF USE OR WEAR. LABELING ON THE TAP READS: HANSON WHITNEY 332017 1" 8 NC HS G H4 IT IS A 4 FLUTE TAP. THE LEAD IS ABOUT 9/16" LONG. I SHIP 95% OF MY LISTINGS SAME DAY AS PAID FOR IF PAID BY 3:00 E.S.T. OHIO) IF YOU MUST HAVE SAME DAY SHIPPING PLEASE CALL ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. OR EMAIL THRU EBAY MESSAGING. PLEASE SEE MY OTHER LISTING FOR MORE GREAT VALUES. I HAVE MANY TAPS(METRIC& STANDARD) IN STOCK UP TO 3" IN DIAMETER. SO IF THIS ISNT WHAT YOUR LOOKING FOR PLEASE CONTACT ME. ALSO HAVE EXTENSION TAPS AND THREAD GAGES. I WILL COMBINE SHIPPING. I WILL SHIP WORLDWIDE. THANK YOU! J TAPS.
|
|
|
USED? SHARP 1-1/4 - 18 HSS 2B 6 FLUTE TAP USA MADE MACHINIST MACHINE SHOP TOOL
YOU ARE PURCHASING THE PICTURED TAP. QUICK SHIPPING AVAILABLE SEE BELOW. WE THINK THE TAP IS UNUSED BUT WE LISTED IT AS USED BECAUSE WE ARE NOT SURE. IT IS LABELED: J&L USA. 1 1/4- 18 HSS 2B. IT IS A 6 FLUTE STRAIGHT FLUTE TAP. THE LEAD IS ABOUT 1/4" LONG. IF YOU NEED OVERNIGHT I CAN DO THAT ALSO. PLEASE CONTACT ME WHEN PURCHASING TO REQUEST THIS OPTION. BUYER WILL PAY ADDITIONAL COST. I SHIP 95% OF MY LISTINGS SAME DAY AS PAID FOR IF PAID BY 3:00 E.S.T. OHIO) IF YOU MUST HAVE SAME DAY SHIPPING PLEASE CALL ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. OR EMAIL THRU EBAY MESSAGING. PLEASE SEE MY OTHER LISTING FOR MORE GREAT VALUES. I HAVE MANY TAPS(METRIC& STANDARD) IN STOCK UP TO 3" IN DIAMETER. SO IF THIS ISNT WHAT YOUR LOOKING FOR PLEASE CONTACT ME. ALSO HAVE EXTENSION TAPS AND THREAD GAGES. I WILL COMBINE SHIPPING. ... moreI WILL SHIP WORLDWIDE. THANK YOU! J TAPS.
|
|
|
NEEDS SHARPENED 1 1/2 - 8 H5 TAP 6 FLUTE CHROMED HSG MACHINIST MACHINE SHOP
YOU ARE PURCHASING THE PICTURED TAP. IT IS USED. IT HAS CHIPPED TEETH. IT WILL NEED TO BE SHARPENED TO CUT FRESH METAL. IT SHOULD WORK NO PROBLEM CLEANING UP DAMAGED OR DIRTY THREADS SINCE MOST OF THE LEAD TEETH ARE NOT CHIPPED. LABELING ON THE TAP READS: MORSE USA 1 1/2- 8 K-HSG H5. IT IS A 6 FLUTE STRAIGHT FLUTE TAP. THE LEAD IS ABOUT 5/8" IT IS CHROME COATED. I SHIP 95% OF MY LISTINGS SAME DAY AS PAID FOR IF PAID BY 3:00 E.S.T. OHIO) IF YOU MUST HAVE SAME DAY SHIPPING PLEASE CALL ME. AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. OR EMAIL THRU EBAY MESSAGING. PLEASE SEE MY OTHER LISTING FOR MORE GREAT VALUES. I HAVE MANY TAPS(METRIC& STANDARD) IN STOCK UP TO 2 1/2" IN DIAMETER. SO IF THIS ISNT WHAT YOUR LOOKING FOR PLEASE CONTACT ME. ALSO HAVE EXTENSION TAPS AND THREAD GAGES. FREE SHIPPING IF YOU BUY 5 OR MORE OF MY LISTINGS. ... moreOFFER GOOD FOR U.S. STATES SHIPPING ONLY. SOME LARGE ITEMS DO NOT QUALIFY. I WILL COMBINE SHIPPING ON SMALLER ORDERS. I WILL SHIP WORLDWIDE. THANK YOU! J TAPS. On Nov-29-07 at 19:32:38 PST. Seller added the following information:
|
|
|
3/4-14 NPT 3/4" x 14 Pipe Tap - Machine Shop Quality High Speed Steel HSS
3/4-14 NPT 3/4" x 14 NPT Pipe tap manufactured using the highest quality machine shop grade high speed steel. ~ ~
|
|
|
9/16-27 NS 9/16" x 27 TPI Tap - Machine Shop Quality High Speed Steel HSS
9/16-27 NS tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
8-24 NS Tap - Machine Shop Quality High Speed Steel HSS
8-32 NC tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
3/16-32 NF 3/16" x 32 TPI Tap - Machine Shop Quality High Speed Steel HSS
3/16-32 NF 3/16" x 32 TPI tap manufactured using the highest quality machine shop grade high speed steel. ~ ~
|
|
|
1-8 NC 1" x 14 NS Tap - Machine shop quality High Speed Steel HSS
1"8 NC tap manufactured using the highest quality US made machine shop grade high speed steel(HSS) ~ ~
|
|
|
12-32 #12 x 32 TPI NS Tap - Machine Shop Quality High Speed Steel HSS
12-32 NS tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
10-40 NS Tap - Machine Shop Quality High Speed Steel HSS
10-40 NS tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
1/4-28 NF 1/4" x 28 LEFT HAND Tap - Machine Shop High Speed Steel HSS
1/4-28 NF Left Hand tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
8-36 NF Tap - BOTTOM Bottoming Machine Shop Quality High Speed Steel HSS
8-36 NF tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
6-56 NS Tap - BOTTOM Bottoming Machine Shop Quality High Speed Steel HSS
6-56 NS Bottom tap manufactured using the highest quality machine shop grade high speed steel. ~ ~
|
|
|
6-40 NF Tap - BOTTOM Bottoming Machine Shop Quality High Speed Steel HSS
6-40 NF Bottom tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~ dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-144a017f89c-0x114-
|
|
|
5-44 NF Tap BOTTOM Bottomming - Machine Shop Quality High Speed Steel HSS
5-44 NF Bottom tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
5-40 NC Tap BOTTOM Bottomming - Machine Shop Quality High Speed Steel HSS
5-40 NC Bottom tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
4-48 NF Tap - BOTTOM Bottoming Machine Shop High Speed Steel HSS
4-48 NF Bottom tap manufactured using the highest quality machine shop grade high speed steel. ~ ~
|
|
|
3-48 NC Miniature Tap BOTTOM BOTTOMING - Machine Shop High Speed Steel HSS
3-48 NC Bottom miniature tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-144a017f7c5-0x106-
|
|
|
Vintage Coke Coca Cola fountain machine tap handle soda fountain tap handle
Good condition. Good color. Light scratches. Light oxidation on the chrome. Measures approximately 3" x 1-1/2" x 7/8" Any questions please ask before bidding. Check out my other items! Tools and more! Shipping to the 50 contiguous states. Please ask for an invoice on multiple purchases for reduced shipping cost. Thanks for looking! Buy American made! I mainly offer used items. Each person may see an item in a slightly different way. I always take numerous pictures at different angles. I strive for 5 star ratings. If something I have described is not how it appears please let me know how I can make it right. Payment expected within 4 days.
|
|
|
5/16-32 NS 5/16" x 32TPI Tap - Schrader Valve Machine Shop High Speed Steel HSS
5/16"32 NS tap manufactured using the highest quality machine shop grade high speed steel. For use with the external schrader valves threads commonly found on the tires of bicycles. Automobiles and motorcycles. See for more information. ~ ~;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144aa8197b2-0x113-
|
|
|
JAGERMEISTER MACHINE JEMUS COLD SHOT TAP MACHINE/GREAT CONDITION/LOCAL PICKUP
LIKE NEW/WE ONLY USED THIS A FEW TIMES. WORKS GREAT.MAKES PERFECT ICE COLD SHOTS! DUE TO THE SIZE AND WEIGHT.LOCAL PICKUP ONLY IN LOS ANGELES/HOLLYWOOD. I WILL DELIVER WITHIN 10 MILES FOR $20. ZIP CODE 90068
|
|
|
Jagermeister 3 Bottle Shot Machine Jager Tap Model JEMUS SN:US010680 MAN CAVE!!!
JAGERMEIRTER Shot Machine 3 BOTTLE Tap COOLER Model JEMUS SN:US010680 APPROX. 17"T WITHOUT BOTTLES. 11.5" WIDE& 15" LONG ALL LIGHTS AND COOLER WORKS GREAT! NOTE: All items are pre-owned. As with all vintage items. Some wear may be present. All items come from estate sales. Flea markets.etc. I cannot guarantee smoke or pet free. The quality of my items are as described or as seen in the pictures What you see is what you get. I start bids low to keep it more like an auction. It does not reflect the quality of the items. Any questions please e-mail me via eBay. I am no expert. But try to describe the item as seen. If there is a problem. Please contact me. Allow me to make your purchase be what you expected it to be! Feedback is my best advertisement. So please don't hesitate to leave some. Thanks for stopping by& have ... morefun! I OFFER WORLDWIDE SERVICE- BUYER PAYS SHIPPING AND HANDLING! PAYPAL PAYMENT ONLY FOR WORLDWIDE SERVICE! IF WINNING BIDDER PREFERS ANOTHER METHOD OF SHIPPING OR INSURANCE THEN I WILL BE MORE THAN HAPPY TO DO IT AT THE BIDDERS EXPENSE. I FEEL THAT ONE WEEK IS PLENTY OF TIME TO PAY FOR YOUR ITEMS. SO PLEASE PAY WITHIN THE WEEK. I PREFER PAYPAL. SERIOUS BIDDERS ONLY PLEASE! IF YOU DO NOT INTEND TO PAY. THEN PLEASE DONT BID.
|
|
|
TRANSMATE THE TAPMATE TOO HOT TAP MACHINE 3/4" TO 2" RANGE OF CUTS
TRANSMATE- TAPMATE TOO HOT TAP MACHINE 3/4" TO 2" RANGE OF CUTS IS USED IN GOOD WORKING CONDITION WITH NORMAL SIGNS OF WEAR AND TEAR. THE MANUFACTURERS CARRYING, THERE IS NO VISIBLE BROKEN BITS OR PARTS ON THE MACHINE. Adapter included are 3/4" ip- 1" ip- 1 1/4" ip- 1 1/2" ip& 2"ip some saw and drill bit.
|
|
|
Starrett 93-B Tap Wrench +2 Others Machine Shop T-Wrench FREE SHIPPING!
THIS IS FOR THE THREE HANDLE TAP WRENCHES IN FOTOS. STARRETT 93-B IS EXCELLENT. OTHERS NOT SO EXCELLENT PLEASE SEE PHOTOS FOR CONDITION HELP AND DESCRIPTION. I AM NOT AN EXPERT ON MOST OF THE ITEMS I SELL. BUT I TRY TO DESCRIBE THEM ACCURATELY AND HONESTLY. I WILL MAKE MISTAKES SO PLEASE BE UNDERSTANDING AND LET ME KNOW IF I AM MISREPRESENTING AN ITEM. MANY THINGS WILL BE IN VINTAGE PREOWNED CONDITION AND NOT PERFECT. NOT MUCH MORE TO MAKE YOU READ. THNX AND HAVE FUN.
|
|
|
Murchey #1 Type L Screw Machine Collapsing Tap Tapping Head w/ 1-3/8" Thread Cha
Up for sale here is a Murchey#1 Type L Screw Machine Collapsing Tap Tapping Head w/ 1-3/8" Thread Chasers. 1-3/4" straight shank. Used in good condition. Fee l fre e to ask any questions. SCT3388
|
|
|
Don Julio Tequila Tap Machine Chiller Dispenser by Thermoelectric
This machine has been tested and works great. The machine shows some use wear. But nothing toos serious. The biggest issue is that the plastic disks that hold the bottles are both cracked. This issue does not affect use. Please refer to photos. This is a very rare machine. Only a handful were made. Shipping: We ship our items Monday through Friday via FedEx Ground Mail. Returns: Don't like the fit? Don't like the color? Not what you expected? No problem. Items may be returned within 30 days of ship date. Buyer pays return shipping unless the problem is seller error. Items must be returned in original condition for full refund. International Customers: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyers’ responsibility. Please check with your country’s customs office ... moreto determine what these additional costs will be prior to bidding/buying SHSU Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage - Machine Screw Tap Set No. 907 - The Standard Tool Company
My Dad had a LOT of these old sets from different places. All old. Most still in the case. If you are interested in this let me know and I can send you pictures of the others. I don't know anything about these.
|
|
|
Matco machine screw franctional and metric Tap and Die set 76 piece 676TD
Matco machine screw franctional and metric Tap and Die set 76 piece 676TD Up for auction is a specialty item for the metal artist. A MATCO machine screw Fractional and metric tap and die set. see label in pics) All 76 pieces are in the case. Since condition of this type of item is subjective. We've taken. Many pics close up so you can decide the condition for yourself. This is a great chance to get a very high quality item at a great price. Thanks for looking
|
|
|
K.R. Wilson 1.520" 4TPI ACME Automatic Screw Machine Thread Tap 4-Flute 12-1/2"
Up for sale here is a K.R. Wilson 1.520" 4TPI ACME Automatic Screw Machine Thread Tap 4-Flute 12-1/2" OAL USA. Shank is 1-1/4" dia. Flute length is 8" Used in good condition. Feel free to ask any questions. SCT3435,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-144be59b488-0xf2-
|
|
|
EXL Cond. Micro Tap Guide (Fisher Machine Tool) 1/2" Shank 20MGT (95267472) 067
Up for auction is this Micro Tap Guide a Fisher Machine Product. It's in excellent. Like-new condition and comes in original pouch. Please see description below and pictures above for more details. This item comes from a smoke and pet-free home and listed as seen. High bidder will not be disappointed. All items shown in photos are the exact one high bidder will receive. Please email me with any questions BEFORE BIDDING and I will try to reply asap. Thank you for looking. Top-Quality Machinist Tool For Precision Work: Applies just enough pressure on the tap for precise centering and perfectly square threads. Just install in your lathe tailstock. Drill press, or mill spindle, and align the point of the tap guide with the small hole at the end of the tap wrench. Adjust the tailstock or travel to remove all free-play between guide, tap wrench ... morewith installed tap, and pre-drilled hole. As you cut the threads by hand, the tap guide’s internal spring keeps steady pressure on the tap to prevent misalignment or jumping the threads. Fully adjustable spring tension allows fine-tuning the amount of pressure on the tap. Knurled bottleneck provides a non-slip grasp. Reversible guide tip fits male or female tap wrench hole. SPECS: Steel. Hardened, knurled bottleneck. 31⁄8" 7.9cm) OAL, ½" 13mm) diameter shank, 3⁄16" 4.8mm) diameter tip, retracts ½" into body. Adjustable spring tension. Check my feedback and bid with confidence! Payment must be received 4 days from auction end to avoid ebay notification. If you ship to a New York State address there will be a 8% state tax added to your total. I reserve the right to ship via FedEx Ground instead of USPS or UPS if I need to. I will pay for any increase in the shipping amount if that applies. ATTENTION BIDDERS: I do NOT give partial refunds at all. If you are not happy with the item you received and it meets my"return policy" then I will provide a full refund when the item is returned. If your hoping that you can get a couple dollars refund
|
|
|
Cincinnati multi station drill press 4 head gang style drill / tap machine
Cincinnati 16 3000 4 Gang drill press I have an exquisit Cincinnati 4 head drill press! It's technical name on the tag reads Cincinnati 16 3000 Lathe A Tool Co. Canedy Otto Division. I got it as part of a much larger deal with much more machinery. It does have a reservoir and moat for cooling fluid but it does not have the pump(about $30.00 at supply house + hoses) It comes with a few extra belts also. I know that this drill is worth between $5.000.00 to $10,000.00 depending on the market. It has 4 motors that are 3/4 horse 220/ 440 volt 3 phase 60 hz Table size 16" x 56" drill area and 61" x 21" overall machine height 87" depth 36" width 61" Fully adjustable table with a crank like a mill handle. The heads are Morse#2 taper Adjustable speeds on all 4 heads is the options but you can adjust them separately. ... morespeeds on tag pic) Weighs about 4,000 lbs +- We just simply have little use for this machine. I have the reserve price set at almost exactly scrap value so I know that I am not asking too much for a machine that works perfectly! I obviously hope for much more, but I will not take less than I can scrap it for, that would be foolish. We have a big enough forklift to load it on a low trailer with no sides for you. We will not charge you for that. You will have to arrange any shipping during our business hours. We will be happy to work with you to arrange that. We just need to make room for another piece of equipment we are purchasing in the next few weeks.
|
|
|
vintage pepsi cola soda tap dispenser PEPSI MACHINE MODEL: LANCER
Vintage Pepsi soda dispenser. It does have the regulator in the sale. Selling this as parts but it does work. Email with questions. I will deliver to Salina or Kansas city area for a small fee.
|
|
|
Greenfield Tap Die Corporation Small Tools Catalog No 32 GTD 1932 Machine Drill
Up for Auction Booklet- Small Tools Catalog No. 32" Greenfield Tap and Die Corporation. Greenfield Mass. GTD. Printed in 1932. Taps. Dies, twist drills, screw extractors, reamers, gages, screw plates, pipe tools and machine tools. Soft cover with 381 pages. 5" x 7 1/4" Black& White Line Drawings. Condition. Used.No loose pages. Some folds, creases to edges, bumps to corners. Splits to cover along spine(See Photo#11) Dark spots on back cover. Overall Good Condition. Please view all photos and ask questions prior to bidding. Shipping charges apply to the 50 US States. No International Bidders. Payment must be received within 3 days of auction end. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-144c1670342-0x10d-
|
|
|
JAGERMEISTER J99 TAP MACHINE/COOLER SHOT 3 BOTTLE HOLDER MANCAVE BAR PARTYS BEER
UP FOR BIDDING IS A GENTLY USED JAGER MACHINE THAT LOOKS REALLY COOL LITE UP. IT WAS A 1 OWNER MACHINE. IT HAS 3 BOTTLES AND SPOUTS. WITH A BUILT IN ROLL CAGE. WHAT MORE CAN A MAN ASK FOR? IT HAS CLIPS ON THE SIDES OF MACHINE TO HOLD LIGHTS. I WRAPPED AN 18' GREEN ROPE LIGHT AROUND IT TO TAKE THE PHOTO'S BUY SINCE I DID THAT I WILL INCLUDE IT IN ON THE SALE. I PUT SOME EXTRA HOOKS ON THE SIDES SO YOU CAN FIX IT UP THE YOU WANT TO. LUCKY YOU! IT LOOKS LIKE SOMEONE HIT THE FINS IN BACK(SEE LAST PHOTO) BUT DOES NOT EFFECT THE MACHINES SUB ZERO COOLING AT ALL. I INVITED A FEW MALE FRIENDS OVER TO GIVE IT THE ONCE OVER AND THEIR APPROVAL. I RECEIVED THE THUMBS UP AND THEY ENJOYED A CHILLED BOTTLE OF JAGER ON ME. MEN, EASY TO PLEASE! ANY QUESTIONS FEEL FREE TO EMAIL ME. I ORIGINALLY THOUGHT IT WEIGHED 60 LBS. THE BOX SIZE AND SO SHIPPING ... moreWAS CHARGING 80.00. I SEE ON HERE OTHERS ARE SHIPPING FOR 55.00 SO I WILL DO THE SAME AND I'LL FIGURE IT OUT. AS ALWAYS, HAPPY BIDDING! Manufacturer: Jagermeister model j99 Function: Bottle Shot Machine Features: Holds 3 Jagermeister Bottle(750ml and 1L sizes Only) Chills Shots to Zero Degrees Fahrenheit or below freezing temperatures overflow tray power and dispense buttons Approx. Dims: 11"W x 15"D x 16"H Power Type: Electric 115V. 60HZ, C ondition: in really good cosmetic condition minimal surface scratches. It looks like it had something hit the grills in back( see LAST photo) but no real damage and no effect to machine. PAYMENT DUE WITHIN 24 HOURS OF END OF AUCTION TO INSURE TIMELY DELIVERY/SHIPPING! I BUY MY ITEMS AT AUCTIONS AND ESTATE SALES AS IS. THEREFORE I AM SELLING MY ITEMS AS IS. THERE ARE NO RETURNS AND NO REFUNDS. I WILL TRY TO GIVE YOU AS MUCH INFORMATION AS I POSSIBLY CAN ON EACH ITEM. THERE WILL BE SOME THAT I JUST HAVE NO IDEA ABOUT. PLEASE LOOK AT PHOTOS CLOSELY.WHAT YOU SEE IN MY PHOTOS IS WHAT I WILL BE SENDING TO YOU. I WILL ONLY SHIP TO THE LOWER 48 UNLESS OTHERWISE DISCUSSED. PLEASE CONTACT ME BEFORE BIDDING ON ITEM ON SHIPPING. PLEA
|
|
|
Jagermeister Ice Cold On Tap Shot Machine Cooler Dispenser Liquor Bar Display
Used only once. bought it for my boyfriend but we broke up and I have no use for it. In very good condition- I have all orange spouts even though you don't see all 3 in my pictures. It does work just fine! NO INTERNATIONAL SHIPPING- U.S. ONLY
|
|
|
21 Tap Machine Grounding Plate w/3 .25' copper strips w/ 7 taps ea. 1/4-20
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Up for sale is a Used 21 Tap Machine Grounding Plate w/3.25' copper strips w/ 7 taps ea. 1/4-20 In very good condition. Missing 3-1/4-20 screws Expedited and Next day shipping are available upon request at buyers expense. International shipping is available. International buyers please contact me for a shipping quote before making purchase. On Jun-24-13 at 17:56:16 PDT. Seller added the following information:
|
|
|
Jagermeister Shot Machine Ice Cold Bar Back On Tap No Reserve
Please scroll down under the description to view all of the pictures Up for auction is this very nice Jagermeister On Tap bar back shot machine that serves up ice cold shots. Unit works excellent. The Jagermeister 3 Bottle Tap Machine is perfect for serving up ice cold shots at 0°F. This machine is great for bar settings or at-home entertaining. Holds 3 Jagermeister Bottles(750ml and 1L sizes only) Compact Design Chills Jagermeister to below freezing temperatures Dimensions: 11" W x 15" D x 26" H(when loaded with 1 liter bottles) Normal operation uses less than 2 standard 100 Watt light bulbs The Jägermeister 3 Bottle Tap Machine is perfect for serving up ice cold shots at 0°F. This machine is great for bar settings or at-home entertaining. The Jägermeister 3 Bottle Tap Machine is packaged with: 1 Tap Machine. ... more3 Bottle Stoppers, 1 Drip Tray, 1 Air Filter, 1 Full Color Users Guide, 1 Sleeve of disposable 1.5oz shot cups and 1 Sleeve of disposable 4.5oz drink cups. Holds 3 Jägermeister Bottles(750ml and 1L sizes only) Compact Design, Chills Jägermeister to below freezing temperatures, Graphics and logos backlit with LED technology, Low indicator light, 1 year limited warranty, Dimensions: 11" W x 15" D x 26" H(when loaded with 1 liter bottles) Normal operation uses less than 2 standard 100 Watt light bulbs, See more at: http:www.tapmachine.com/dp/B00EYMPUNW#sthash.Aw4gtDKc.dpuf. The Jägermeister 3 Bottle Tap Machine is perfect for serving up ice cold shots at 0°F. This machine is great for bar settings or at-home entertaining. The Jägermeister 3 Bottle Tap Machine is packaged with: 1 Tap Machine. 3 Bottle Stoppers, 1 Drip Tray, 1 Air Filter, 1 Full Color Users Guide, 1 Sleeve of disposable 1.5oz shot cups and 1 Sleeve of disposable 4.5oz drink cups. Holds 3 Jägermeister Bottles(750ml and 1L sizes only) Compact Design, Chills Jägermeister to below freezing temperatures, Graphics and logos backlit with LED technology, Low indicator l
|
|
|
Irwin 26376 76 Piece Machine Screw/Fractional/Metric Tap and Hex Die Set Nice !
We have for auction a nice used Irwin Tools 26376 76 Piece Machine Screw/Fractional/Metric Tap and Hex Die Super Set. The set is complete with all 76 pieces here and a great way to save over new! Please see auction photos for condition as the red storage case shows some signs of cosmetic wear from storage and some minor cosmetic oxidation noted on the tools. But nothing abnormal or serious here! If you have any questions, please feel free. Ideal for auto repair and machinery Convenient set case puts all the necessary taps. Dies and drive tools at your finger tips Contains Most commonly used sizes and thread counts High Carbon Steel Construction for Durability The Irwin Hanson 76-Piece Machine Screw/ Fractional/ Metric Tap and Hex Die Set includes sets of machine screw plug taps and 5/8-inch hexagon dies. Fractional plug taps and 1-inch hexagon ... moredies, metric plug taps and 5/8-inch hexagon dies, and metric plug taps and 1-inch hexagon dies. They're made to superior standards so you can accurately repair or create new tools, and come in a convenient plastic storage case. What's in the Box Machine Screw Plug Tap and 5/8-inch Hexagon Dies in sizes: 4- 40 NC. 6- 32 NC, 8- 32 NC, 10- 24 NC, 10- 32 NF, 12- 24 NC; Fractional Plug Tap and 1-inch Hexagon Dies in sizes: 1/4-inch- 20 NC, 1/4-inch- 28 NF, 5/16-inch- 18 NC, 5/16-inch- 24 NF, 3/8-inch- 16 NC, 3/8-inch- 24 NF, 7/16-inch- 14 NC, 7/16-inch- 20 NF, 1/2-inch- 13 NC, 1/2-inch- 20 NF; Metric Plug Tap and 5/8-inch Hexagon Dies in sizes: 3mm- 0.50, 4mm- 0.70, 4mm- 0.75, mm- 0.80, 5mm- 0.90, 6mm- 1.00; Metric Plug Tap and 1-inch Hexagon Dies in sizes: 7mm- 1.00, 8mm- 1.00, 8mm- 1.25, 9mm- 1.00, 9mm- 1.25, 10mm- 1.25, 10mm- 1.50, 11mm- 1.50, 12mm- 1.50, 12mm- 1.75; Pipe Thread Plug Tap and 1-inch Hexagon Dies in sizes: 1/8-inch- 27 NPT, 1/8-inch- 28 BSP; Threading Tools: Adjustable Die Stock- 1-inch Dies, Plain Die Stock- 5/8-inch Hexagon Dies, Adj. Handle Tap Wrench- Taps No. 0 to 1/2-inch, Two-in-One Tap Wrench- Taps 1/4-inch t
|
|
|
3 Bottle Shot Machine Ice Cold Bar Back On Tap No Reserve
Great three bottle cold shot machine made for Cuervo- can be used with any products/ variety. Fireball, Almendrado etc. Works great- has been in storage. Shipping charges will be calculated and added to the invoice- all shipping paid by buyer. Please email for shipping estimate- approx measurements will be 30 x 24x24 about 25 lbs. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-144dd1e1753-0x101-
|
|
|
T1 - 1/4 CLUTCH DRIVE RACHET TAP COLLET FOR CNC MILLING MACHINE SHOP
USED/ WORKING T1- 1/4" CLUTCH DRIVE RACHET TAP COLLET Clutch drive automatically stops spinning if tap reaches bottom of hole preventing broken taps. SHIPPING DETAILS- Shipping is calculated by ebay/ Canada post see shipping details at top. CHECK OUT OUR EBAY STORE BY CLICKING THE LINK BELOW Powered by
|
|
|
3/8-24 NF 3/8" x 24 NF LEFT HAND Tap - Machine Shop Quality High Speed Steel HSS
3/8-24 NF LEFT HAND tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
7/16 20 NF TAP WINTER MACHINIST MACHINE TOOLING HSS TOOLS THREADING TAPPING
You are purchasing the pictured TAP. This item is USED. BUT VERY SHARP. It is labeled: WINTER 7/16 20 NF HS R24 IF YOU HAVE ANY QUESTIONS. DON'T HESITATE TO MESSAGE ME THROUGH EBAY. I WILL COMBINE SHIPPING I SHIP WORLDWIDE THANK YOU! DRAWER 39
|
|
|
Bacardi Grape shot dispenser tap machine Holds 2 Liquor Bottles Ice Cold
Slightly Used Shot dispenser you can put and kind of liquor in it
|
|
|
YORL HS TAP MACHINE SCREW 1-" 14 NF
| | YORL HS TAP MACHINE SCREW 1- 14 NF, Click to View Image Album TAP 1" 14 NF York brand made in USA in excellent condition YOU CAN SUPER SIZE PICTURES BY CLICKING ON THEM TO SEE THEM BETTER. Payment, I accept the following forms of payment: PayPal Shipping& Handling, US Shipping. USPS First-Class Mail®(prices calculated at checkout) USPS Priority Mail®(prices calculated at checkout) International Shipping. USPS First-Class Mail International(prices calculated at checkout) CHECK OUT REQUIREMENTS, CHECK OUT REQUIREMENTS, FOR WINNING BIDDER ONLY USE EBAY CHECKOUT BOX TO GET FORM AFTER CLOSE OF AUCTION. TO SEND ME MESSAGES AND TO ASK QUESTIONS PUT THEM IN COMMENT BOX. NO NEED OF SENDING SEPARATE E-MAIL. I WILL NOT ANSWER E-MAILS UNTIL FORM HAS BEEN FILLED OUT AND IF NOT FILL OUT I TAKE AS YOU HAVE NOT MADE CONTACT OTHER EMAIL ... moreBEFORE FORM IS FILLED OUT DO NOT COUNT. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
|
|
|
Irwin Hanson 41-pc Machine Screw / Fractional Tap & Hex Die Set
41-pc set in plastic case includes the following items: Machine Screw Plug Tap and 5/8" Hexagon Dies in sizes: 4- 40 NC. 6- 32 NC, 8- 32 NC, 10- 24 NC, 10- 32 NF, 12- 24 NC Fractional Plug Tap and 1" Hexagon Dies in sizes: 1/4" 20 NC, 1/4" 28 NF, 5/16" 18 NC, 5/16" 24 NF, 3/8" 16 NC, 3/8" 24 NF, 7/16" 14 NC, 7/16" 20 NF, 1/2" 13 NC, 1/2" 20 NF Pipe Thread Plug Tap and 1" Hexagon Dies in sizes: 1/8" 27 NPT Threading Tools: Adjustable Die Stock- 1" Dies, Plain Die Stock- 5/8" Hexagon Dies, Adj. Handle Tap Wrench- Taps No. 0 to 1/2" T-Handle Wrench- Taps No. 0 to 1/4" Two-in-One Tap Wrench- Taps 1/4" to 1/2" 18 Leaf Standard Thread Pitch Gauge, Empty Plastic Case. Also I'm throwing in a set from Vermont Tap& Die. See pics.
|
|
 |