|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Condition: Used Location: Fullerton, United States LESS THAN 100 CUT HOURS ! All specifications and locations are subject to change without notice. 2424 Cypress Way. X-Axis Traverse Rate 984 IPM.
Buy It Now
Condition: Used Location: Dayton, United States Max Swing Over Bed: 20.08”. - Max Turning Length: 20.47”. - Swing Down Tool Setter. - Feed Range.1 to 400 ipm. - Turret: 12 Station. - X-Axis Travel: ... more10.23”. - Z-Axis Travel: 20.47”. - Spindle Speed Range: 35 to 3800 rpm.
Buy It Now
Condition: Used Location: Ferndale, United States OKUMA LT 15 CNC CNC twin spindle live turret. has a couple small issues under power. I have personally operated this machine. Just installed about 18 ... moremonths ago.
Buy It Now
Condition: Used Location: Ferndale, United States Death forces sale CNC "2" LR25 Okuma CNC lathes. 2 LR 25 Okuma live tooling lathes. Both machines make good parts - under power.
Buy It Now
Condition: Used Location: Novi, United States Turret Capacity 16 + 16. Spindle Nose A2-6. Spindle Speed 5,000 rpm. Sub Spindle yes. Sub Spindle Speed 5,000 rpm. Sub Spindle Motor 30 hp. - Sub Spindle. ... moreC1/C2 Axis Index 0.001°.
Buy It Now
Condition: Used Location: Novi, United States Turret Capacity 12. Main Motor 30 hp. Big Bore Option. Spindle Speed (RPM) 4200.
Buy It Now
Condition: Used Location: Novi, United States Spindle Speed 6,000 rpm. Coolant Thru Spindle yes. Tool Changer Capacity 32. Main Motor 15 hp. Table Size 48" x 20". Spindle Taper CAT 50.
Buy It Now
Condition: Used Location: Louisville, United States This lathe is loaded with options and ready to go to work. Can be seen under power. Turning Dia 16.14". Air Blow Chuck. Turret Air Blow. Y-Axis Off Center ... moreTurning Function. LNS E Connect. Live Tooling Yes.
Buy It Now
$13.55 Shipping Condition: For parts or not working Location: Fountain Inn, United States 2000 Okuma& Howa SPL-25 CNC Twin Turret Lathe w/ Auto Loader Specifications: Control.Fanuc 18t Max Swing. 9.84” Max Cutting Diameter. 9.84" Max ... moreCutting Length. 7.87" Spindle Nose. A2-8" Max Bar Capacity. 3.03" Spindle Motor. 25 HP Spindle Speed. 35-3.500 RPM X-Axis Travel. 6.88" Z-Axis Travel. 7.87" Rapid Traverse Rate. 944 IPM Turret Positions. 10 x 2 Equipped With: Fanuc 18-T Control 10" Kitagawa Chuck Chip Conveyor Overhead Gantry Loader 16 Pallet Stocker Feeder Table Twin Turret Box Way Construction Misc Toolholders https:www.youtube.com/watch?v=hlV6afvqzzU Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check, or company
Buy It Now
Condition: Used Location: Detroit, United States 8850 SFPM. Attached hydraulics. Attached electrical. Hydraulic expandable Mandrell collet on work head. SBS Balancer SB-4500.
Buy It Now
Condition: Used Location: Novi, United States Okuma Ace Center MB-56VA. - Coolant Tank & Pump. Coolant Thru Spindle yes. Tool Changer Capacity 32. Main Motor 30 hp. Spindle Speed 15,000 rpm.
Buy It Now
Condition: Used Location: Louisville, United States LB 3000EXII MYW 800. Okuma CHIP CONVEYOR, SIDE-HINGE (LNS) Included. Okuma RAPID TRAVERSE OVERRIDE SWITCH Included. Okuma MILLING SPINDLE – 6000RPM, 9.5HP, ... more+2.76” / -1.77” Y-AXIS Included. Okuma MANUAL TOUCHSETTER Included.
Buy It Now
Condition: Used Location: Dayton, United States Spindle Motor - 22/15 kw (20 min /cont). No chip conveyor / No Turret Tooling. IGF (subject to confirmation). (22 kw = 29.5 hp).
Buy It Now
$50.00 Shipping Condition: New Location: Vietnam The software inside still uses the firmware of MICRO DNC 2C. The MICRO DNC 2D is a prototype of the MICRO DNC 2C with a redesigned aluminum case and flexible ... moreplastic keyboard. This is a portable DNC device.
Buy It Now
$34.33 Shipping Condition: New – Open box Location: Racine, United States Okuma Howa | Okuma Howa H10B. OKUMA HOWA HB10A-2.5 INT. 2 1/2” ID 120mm CL Static Tool Block Internal Coolant. Internal coolant flow. Bolt-On Tool Blocks.
Buy It Now
$35.00 Shipping Condition: New Location: Bulgaria The emulator provides high level of data protection through USB port. Nalbantov USB floppy disk drive emulator N-Drive Industrial. Excellon CNC-6 upgraded ... morewith the Nalbantov N-Drive USB Emulator - YouTube.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Inventory Number: 12231190001. Model Number: ESV 3016. Manufacturer: OKUMA. Capacity: 20" X 37 1/2". Unless noted, item has not been tested, and condition ... moreis unknown. We reserve the right to cancel any order.
Buy It Now
Condition: Used Location: Dayton, United States Indexing angle - 0.001". Max load capacity - 880 lbs. Floor space, w x d - 95.04" x 178.43". MOSDIC Coolant Filtration Chip Conveyor. Plumbed for HP TSC ... more(no pump). Spindle center to pallet top - 1.97" to 25.98".
Buy It Now
Free Shipping Condition: Used Location: Kalispell, United States Yaskawa CNC Sanyo Denki Tape Reader Head 2401-1 no 013689 lathe mill Okuma all parts were removed from a 100% working cnc.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1450ca49b8f-0x109-
Buy It Now
Condition: Used Location: Novi, United States Please see info below and photos on a really nice Okuma Captain L-370 BBMW CNC Lathe with Live Tooling. C-Axis, and Sub Spindle. This machine is loaded ... morewith options. Please see description below. It is under power in Cincinnati, OH and is available to show to you. This Okuma Captain has less than 4800 Cutting Hours. This machine will make someone an excellent machine. I do have the ability to load this on your truck. I can shop and get you a freight rate if you want me to do so. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com. OKUMA CAPTAIN L-370 BBMW CNC TURNING CENTER w/ Live Tooling& Sub-Spindle Model Captain L-370BBMW. New 2005 EQUIPPED WITH: Okuma E100L CNC Control w/CRT. Live Tooling, 6.5" Kitagawa 3-Jaw Chuck Sub-Spindle, 10" Kitagawa 3-Jaw Chuck Main Spindle, Live Tooling, C-Axis, 3.15" Big Bore Spindle Bore Option, Touch Setter, One Touch IGF, 3D Animation, Tool Life Management, Tool Wear Compensation, Lap 4, User Task 2, Exp. Auto Chamfering, Programming Help, Servo Link NC, Servo Link Spindle, Heavy Tools, HI-G Control, Inch/Metric Switchable, 2) Axial Live Holders, Chip Conveyor and Coolant System. CATALOGUE SPECIFICATIONS: Max Swing Over Bed. 20.08" Maximum Turning Diameter Main Chuck. 14.56" Maximum Turning Diameter Sub-Spindle. 8.23" Maximum Turning Length. 20.47" Main Chuck Size. 10" Sub-Spindle Chuck Size. 6.5" Cross Travel(X-Axis) 10.23" Longitudinal Travel(Z-Axis) 20.47" Feed Range(Infinitely Variable) 1-400 IPM Rapid Traverse Rate(X-Axis) 787 IPM. Rapid Traverse Rate(Y-Axis) 984 IPM. Number of Turrets. 1. Tool Positions.
Buy It Now
Condition: Used Location: Jasper, United States 2016 OKUMA MB-5000H. OKUMA OSP-P300M. CNC HORIZONTAL MACHINING CENTER. 0.001 DEGREE, FULL 4TH. 15 – 15,000 RPM. 40 HP INTREGAL. MAX WEIGHT ON PALLET. ... moreTOOL PART PROBE.
Buy It Now
Condition: Used Location: Millersburg, United States Part Number LNC8. Model LNC8. Removed from a Okuma LNC8 CNC. Lift Tables. Available on select orders within USA lower 48 states. Our mission is to empower ... moreindustries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
Condition: Used Location: Novi, United States SMW Autoblock Hydraulic Steady Rest. - Live Tooling. - Coolant Tank & Pump. - Chip Conveyor. - Renishaw Probing (Receiver). - Tool Presetter. - Schunk ... moreRota TP350-115 Air Chuck. C Axis Index 0.001°.
Buy It Now
Condition: Used Location: Jasper, United States 2011 OKUMA MB-5000H. OKUMA OSP-P200M. CNC HORIZONTAL MACHINING CENTER. 0.001 DEGREE, FULL 4TH. 15 – 15,000 RPM. 40 HP INTREGAL. MAX WEIGHT ON PALLET. ... moreTOOL PART PROBE.
Buy It Now
Condition: For parts or not working Location: Watertown, United States Inventory Number: 10231970002. Manufacturer: OKUMA. Less-Than-Truck (LTL) Freight Handling Policy. Diversion of any products contrary to United States ... morelaw is prohibited. We reserve the right to cancel any order.
Buy It Now
Condition: For parts or not working Location: Watertown, United States Inventory Number: 10231670001. Model Number: 769/CROWN L1420. Manufacturer: OKUMA. Capacity: 38.75 KVA. Prices are subject to change. Serial Number: 10 ... more12 0060. Unless noted, item has not been tested, and condition is unknown.
Buy It Now
$9.99 Shipping Condition: Used Location: Hayward, United States Clean OKUMA OPUS7000 Mother Board 1911-2000-53.161 E4809-770-059-B. It was removed From OKUMA C15-2S CNC Lathe. It may fit other machines and models. ... moreDo not make an assumption as to what you think the item is, ASK BEFORE YOU BUY.
Buy It Now
Condition: For parts or not working Location: Fort Worth, United States Model Number: LB15. Manufacturer: OKUMA. Prices are subject to change. EUCLID, OH 44117. 20001 EUCLID AVE. HGR INDUSTRIAL SURPLUS. Less-Than-Truck (LTL) ... moreFreight Handling Policy.
Buy It Now
$35.00 Shipping Condition: New Location: Bulgaria The emulator provides high level of data protection through USB port. Nalbantov USB floppy disk drive emulator N-Drive Industrial. Excellon CNC-6 upgraded ... morewith the Nalbantov N-Drive USB Emulator - YouTube.
Buy It Now
Condition: Used Location: Millersburg, United States Ending Soon. Newly Listed. LET'S STAY IN TOUCH. We are dedicated to understanding the unique challenges and opportunities that each industry faces. Our ... moremission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
$56.42 Shipping Condition: New – Open box Location: Middlebury, United States Size: Length: 24 in. Width: 24 in. Height: 3 in. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote ... morewe will need to know the following Prefer to pick it up yourself?.
Buy It Now
$197.51 Shipping Condition: Used Location: Millersburg, United States Removed for a CNC Okuma LC20-2SC. LET'S STAY IN TOUCH. Part Number LC20-2SC. We are dedicated to understanding the unique challenges and opportunities ... morethat each industry faces. x 6.00 in. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Buy It Now
Condition: For parts or not working Location: Watertown, United States Inventory Number: 10231970005. Model Number: LNC 8. Manufacturer: OKUMA. Item is subject to prior sale . Less-Than-Truck (LTL) Freight Handling Policy. ... moreDiversion of any products contrary to United States law is prohibited.
Buy It Now
Condition: Used Location: Millersburg, United States Lift Tables. Available on select orders within USA lower 48 states. Our mission is to empower industries with the tools and solutions they need to thrive ... morein a dynamic and ever-evolving marketplace. Local Pickup.
Buy It Now
Condition: Used Location: Anaheim, United States OKUMA CROWN MODEL 762E CNC LATHE. Model: 762E. Good condition - used for prototyping not production. Checked out by Okuma already. See pics of inspection ... morereport above. Manufacturer: Okuma. CNC Turning Centers.
Buy It Now
$16.05 Shipping Condition: Used Location: Miami, United States Note: As DHL/FedEx International Priority Service do not deliver to PO BOX addresses. Please mention you Complete Postal Address with Post code and Contact ... moreNumbers Same day Shipping within 24 hrs( excluding Holidays/ Sundays) Delivery in 3-5 working days of dispatch Shipping using DHL/FedEx International Priority services Floppy Emulator(floppy to usb) for HAAS machines This is 3.5 inch 1.44Mb USB-Floppy Drive Emulator(Floppy to USB Converter) It is the replacement for 3.5 inch 1.44Mb floppy drive* Package include one preformatted 4gb Pen Drive Ready to start working* Works with Windows XP. Windows 7. Windows 8(32/64 bit editions) with in house designed software Specifications: Interfaces: USB socket to insert USB flash stick. 4-pin floppy socket for voltage supply- 34-pin socket board for floppy controller connection· Diagnostics LED: Busy· Display: Digital display to show current virtual floppy· Selection buttons: 2 buttons to select a floppy. One button controls one digit. This helps you select a floppy easily and quickly. Format type supported 1.44mb· Voltage supply: 5 V DC. 4-pin-voltage supply socket for 3.5 inch drive· Measurements W/H/D: approx. 100 mm/ 25 mm/ 122 mm. Fit into 3.5 inch drive bay. Requirements: PC running Windows XP/ Windows 7/Windows 8 system to run our program to format USB flash drive. USB flash drive. Avoid Sandisk/Transcend) Payment: We accept PAYPAL only. Please. Pay within 7 days of purchase. If you do not pay or respond within 7 days, we will relist and report to eBay as unpaid item. Important Please Note: You Just need to Swap the OLD Fdd with this emulator and it works. So know how of swapping of FDD is must. Operation instructions in PDF manual as well as 3-4 minutes video instructions. On how to use. Preformatted USB flash drive included. So just start as you install the Emulator in HAAS
Buy It Now
Condition: Used Location: Cypress, United States 2003 OKUMA Impact LU45 CNC LATHE OSP-U100L Swing 33" Center 121” Z120" X26" Turret Stations 10 upper / 8 lower. Model LU45. - OSP makes the conversions ... morefor the lower turret. Swing over bed 33". Center distance 121”.
Buy It Now
Condition: Used Location: Fremont, United States MANUAL PULSE GENERATOR. 20 STATION TOOL CHANGER. SPINDLE SPEED RANGE ----------------- 50 TO 7000 RPM. SPINDLE DRIVE MOTOR - ( 30 MIN. --- 10/7.5 HP. ... moreSPINDLE END TO TABLE SURFACE ----------- 6.3" TO 24". ).
Buy It Now
$35.00 Shipping Condition: New Location: Bulgaria The emulator provides high level of data protection through USB port. Nalbantov USB floppy disk drive emulator N-Drive Industrial. Excellon CNC-6 upgraded ... morewith the Nalbantov N-Drive USB Emulator - YouTube.
Buy It Now
$50.00 Shipping Condition: Used Location: Vietnam Title: Fanuc Pulse Coder Unit. A860-0304-T012, 2500P, w/ AC Red Cap Servo Motor, Used Description: Our Internal Stock# D23-2(3-31-14 dale) You are about ... moreto purchase the following item: 1- Fanuc Pulse Coder Unit. A860-0304-T012, 2500P, w/ AC Red Cap Servo Motor, Used Catalog# A860-0304-T012 Serial# A-440570- B 2500 Pulse/ rev Date- 1984.8 Made in Japan YOU ARE BUYING THE FANUC PULSE CODER BUT YOU ARE ALSO GETTING THE FANUC AC SERVO MOTOR WHICH IT IS STILL ATTACHED TO. THERE IS NO TAG ON THE MOTOR SO WE DON'T KNOW WHAT THE MODEL OF THE MOTOR IS. IF YOU WOULD LIKE WE WILL TAKE THE ENCODER OFF OF THE MOTOR AND SHIP ONLY THE ENCODER. This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition. Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on item
Buy It Now
$22.59 Shipping Condition: Used Location: Lynbrook, United States
Buy It Now
Free Shipping Condition: Used Location: Muskegon, United States (SERIAL NUMBER: 9264. This item was removed from an OKUMA, VERTICAL MACHINING CENTER. NOTE . 5) Like New Condition. 1) Very Poor. sold in good condition ... moreunless otherwise stated!
Buy It Now
Condition: Used Location: Millersburg, United States Lift Tables. Available on select orders within USA lower 48 states. Our mission is to empower industries with the tools and solutions they need to thrive ... morein a dynamic and ever-evolving marketplace. Local Pickup.
Buy It Now
Condition: Used Location: Muskegon, United States (Serial Number: 02029773. Model Number: LB15. Model #: LB15. Manufacturer: OKUMA TOOL TURRET. This item was removed from an OKUMA CNC LATHE. Weight: 440 ... moreLbs. NOTE . 5) Like New Condition.
Buy It Now
$24.57 Shipping Condition: Used Location: Middlebury, United States Removed From Okuma Type MC-60H CNC Machining Center. Prefer to pick it up yourself?. Will there be a dock or forklift. To get a freight quote we will ... moreneed to know the following Warehouse Location: S2945.
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Watertown, United States okuma cnc miller cooling tank. New never used
Buy It Now
Condition: For parts or not working Location: Euclid, United States Inventory Number: 04240380004. Manufacturer: OKUMA. Model Number: LB 15 II. Unless noted, item has not been tested, and condition is unknown. We reserve ... morethe right to cancel any order. Prices are subject to change.
Buy It Now
Free Shipping Condition: Used Location: Millersburg, United States Removed for a CNC Okuma LC20-2SC. Lift Tables. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ... moreever-evolving marketplace. Model LC20-25C. Local Pickup.
Buy It Now
$16.99 Shipping Condition: Used Location: Hayward, United States It was removed From OKUMA C15-2S CNC Lathe. It may fit other machines and models. OKUMA E0451-521-094. For electrical and electronic item, warranty is ... moreallowed with PROOF of a Certified Electrician Who installed it.
Buy It Now
$9.99 Shipping Condition: Used Location: Hayward, United States Clean OKUMA A911-216 OPUS7000 SVP Board E4809-045-158-C. It was removed From OKUMA C15-2S CNC Lathe. It may fit other machines and models. For electrical ... moreand electronic item, warranty is allowed with PROOF of a Certified Electrician Who installed it.
Buy It Now
Condition: Used Location: Novi, United States Turret Capacity L12 / R12. Sub Spindle yes. Live Tooling no. Main Motor 25 hp. Spindle Speed 2,000 rpm.
Buy It Now
$35.36 Shipping Condition: Used Location: Middlebury, United States Removed from Okuma LFS15-1SP CNC Lathe 16.9kVa 220/480V. Size: Length: 29 in. Width: 12 in. Height: 10 in. Weight (lbs, oz): 18. To get a freight quote ... morewe will need to know the following Prefer to pick it up yourself?.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States GP-34/44N Plain Cylindrical Grinder. GA-34/44N Angle-Head Cylindrical Grinder. I’ve read Parts of these Programming and Operations Manuals. There are ... moreSo Many Possibilities. Parts Lists. with OSP5000G-G CNC.
Buy It Now
$9.99 Shipping Condition: Used Location: Hayward, United States OKUMA 1911-2100-52-236 OPUS7000 main board E4809-045-148-C. It was removed From OKUMA C15-2S CNC Lathe. It may fit other machines and models. Note: for ... moreused/ pre-owned item, it may be tarnished, has scratches, surface rust, and/ or shelf rash, is as to be expected of pre-owned condition/ used condition as It has been used and sitting around for awhile.
Buy It Now
$5.99 Shipping Condition: Used Location: Middlebury, United States Model: CL18311A. Removed From Okuma 2SP-V60 Twin Spindle Vertical Turret Lathe Ref#60109. Prefer to pick it up yourself?. Unless otherwise specifically ... moreagreed to in writing by. To get a freight quote we will need to know the following.
Buy It Now
$59.99 Shipping Condition: Used Location: Hayward, United States It was removed From OKUMA C15-2S CNC Lathe. It may fit other machines and models. Clean OKUMA DVIL-D7575A Servo Amplifier. For electrical and electronic ... moreitem, warranty is allowed with PROOF of a Certified Electrician Who installed it.
Buy It Now
$22.58 Shipping Condition: Used Location: Middlebury, United States Removed From An Okuma MX-45VAE CNC Vertical Machining Center W/20 Station ATC Serial No. 9222. Prefer to pick it up yourself?. Model: OSP-U100L. Warehouse ... moreLocation: L4115. To get a freight quote we will need to know the following.
Buy It Now
$63.53 Shipping Condition: Used Location: Middlebury, United States Shipping in the United States is free. All International sale will be shipped using DHL and a shipping charge will be applied to all International Sales ... morewhen the purchase of the item has been made. If you have any questions, Please contact us at 1.800.515.1235 Thank you.
Buy It Now
Condition: New – Open box Location: Longview, United States Also available LU45 Motor Housing Item 313923920265. Also available LU45 Z-Axis Motor 314062323818.
Buy It Now
$184.42 Shipping Condition: Used Location: Middlebury, United States Implied or. We choose the carrier. Unless otherwise specifically agreed to in writing by. Prefer to pick it up yourself?. LOCAL PICK-UP. Will there be ... morea dock or forklift.
|
|
|
|
OKUMA CNC Lathes w/ OSP5000L-G CNC Operation Manual 2446-E-R1 8512-70-300 [PZD]
ITEM DESCRIPTION. Description: Okuma CNC Lathes with OSP5000L-G CNC System Models: LB10. LB15, LP15 LC10, LC20, LC30, LC40, LC50 LS30-N, LH35-N, LH55-N Operation Manual June 1985, OKUMA CNC Lathes with OSP5000L-G CNC System Models: LB10. LB15, LP15 LC10, LC20, LC30, LC40, LC50 LS30-N, LH35-N, LH55-N Operation Manual June 1985 2446-E-R1 8512-70-300. Condition: Used. Removed from equipment ABOUT US. Precision Zone. An authorized repair vendor and member of ICARTEAM. Is a full service repair company completing repairs in house. Precision Zone provides sales and service for a wide variety of industrial controls and equipment used in manufacturing and other industrial applications. We stock and sell a wide range of new. Recoinditioned and exchange products and parts available for immediate shipment from our warehouses in Illinois. What sets us ... moreapart is our ability to troubleshoot and solve customer problems through our experience and advanced technology. We are your one stop shop for new and repaired drives. Controls, monitors, motors, encoders, and other related products. Our main focus and goal is increasing our customers' production capabilities through the sales and service of high quality electronic components, controls, and engineered systems. To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch. Precision Zone offers the following: Competitive industry pricing Free evaluation of repairs(excluding rush orders) Free technical support Exchange programs available Our eBay store serves as an additional channel which we use to promote special offer items and remove excess inventory to help clear space for new product lines. Please feel free to browse our eBay store's categories: Please contact our customer service department at 800-551-4420 or 847-465-9060 to discover our product line capabilities. Ask questions or request technical support. All products are covered by our comprehensive warranty. Warranty terms and conditions are produc
|
|
|
OKUMA Special Functions Manual for CNC Lathes with OSP5000L-G 2452-E-R2 [PZD]
ITEM DESCRIPTION. Description: Okuma Special Functions Manual for CNC Lathes with OSP5000L-G CNC System Models: LB10. LB15, LP15 LC10, LC20, LC30, LC40, LC50, LC20-M, LC40-M, LS30-N, LH35-N, LH55-N November 1985, OKUMA Special Functions Manual for CNC Lathes with OSP5000L-G CNC System Models: LB10. LB15, LP15 LC10, LC20, LC30, LC40, LC50, LC20-M, LC40-M, LS30-N, LH35-N, LH55-N November 1985 2452-E-R2 2465-E-R1 851-12-200. Condition: Used. Removed from equipment ABOUT US. Precision Zone. An authorized repair vendor and member of ICARTEAM. Is a full service repair company completing repairs in house. Precision Zone provides sales and service for a wide variety of industrial controls and equipment used in manufacturing and other industrial applications. We stock and sell a wide range of new. Recoinditioned and exchange products and parts available ... morefor immediate shipment from our warehouses in Illinois. What sets us apart is our ability to troubleshoot and solve customer problems through our experience and advanced technology. We are your one stop shop for new and repaired drives. Controls, monitors, motors, encoders, and other related products. Our main focus and goal is increasing our customers' production capabilities through the sales and service of high quality electronic components, controls, and engineered systems. To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch. Precision Zone offers the following: Competitive industry pricing Free evaluation of repairs(excluding rush orders) Free technical support Exchange programs available Our eBay store serves as an additional channel which we use to promote special offer items and remove excess inventory to help clear space for new product lines. Please feel free to browse our eBay store's categories: Please contact our customer service department at 800-551-4420 or 847-465-9060 to discover our product line capabilities. Ask questions or request technical support. All products are cove
|
|
|
Okuma & Howa NC4PS, NC4SP CNC lathe, Fanuc 6T, chip conveyor
Here is an Okuma& Howa CNC lathe. It has Fanuc 6T controls. The chuck has hydraulic clamping and the tailstock is hydraulic also. I saw the machine run before I bought it. It came from a local shop. Payment to be check or cash. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. All international shipments will be through the U.S. post office ONLY. Sales tax is charged for PA sales unless exempt*
|
|
|
Okuma MC-4VA CNC Vertical Machining Center
Original owner. Complete 4-axis. Excellent machine. Ready-to-work. We are the original owners of this 4VA. It isn’t offered by a dealer who has no history on the use or condition. It has not received a cosmetic coat of paint. It has not been used in a 24-7 production facility. The machine is under power. You can come look at the mill, talk to the people who ran it, and ask any questions. We will even give you a short course in the operation, if you need that. This machine has been in our shop since purchased new in 1984. It is fully operational but was moved aside for a new Okuma machining center. We purchased the new Okuma for its increased memory and 15.000 rpm spindle speed. We still have two more MC-4VA’s running today. It had every option available from Okuma, including complete math and trig function progamming capability. It has helical ... moremilling capability, a tape reader and serial communication. It’s slow to wake up, but it’s been that way for 15 years. The fourth-axis is an oversize Tsudakoma rotary table normally supplied on the 5VA machines. The table can be mounted in a vertical or horizontal axis. And was rebuilt by Okuma in 2009. The rotary table is fully programmable, not just an indexing table. The fourth axis can be programmed to have all 4 axes moving simultaneously. All service work on this machine has been done by Okuma(Morris South) And service records are with the mill. All of the original manuals are included. S/N 59100172 OSP-5000M Control. X-AXIS TRAVEL: 25.59" Y-AXIS TRAVEL: 16.14" Z-AXIS TRAVEL: 17.72" TABLE: 39.37" x 16.14" SPINDLE NOSE TO TABLE: 7.8" 25.5" MAX TABLE LOAD: 1.100 LBS. BOX WAYS. X& Y RAPID TRAVERSE: 591 IPM. Z RAPID TRAVERSE: 512 IPM. FEED RATE: 0.1– 160 IPM. SPINDLE: 15HP. CAT 40 TAPER. SPINDLE SPEED: 50-4000 RPM. ATC: 20 POSITION. TOOL WEIGHT: 17.6 LB MAX. ROTARY TABLE: TSUDAKOMA 13" VERTICAL/ HORIZONTAL. WEIGHT: 13.000 LB SIZE: 9’ x 9’ x 9’
|
|
|
OKUMA MAC TURN 30 MULTI AXIS CNC TURNING CENTER, 2003
OKUMA MAC TURN 30 MULTI AXIS CNC TURNING CENTER FROM STATE OF THE ART TURBINE MFG- NEW: 2003 Sticker Price $69.500 For More information Contact, Lloyd Graff. Rex Magagnotti or Noah Graff at sales@graffpinkert.com Specifications Max. Swing 21.65" Max. Cutting Dia. 21.65" Max. Distance Between Centers 48" From Chuck Face To Face of Tail Stock Max. Work Length 48" Spindle Bore Spindle Nose A2-6 Standard Bar Capacity 2.0" Spindle Speeds 35-5000 RPM Spindle Rotation Angle 0.001 Degree Spindle Horsepower 30/20 HP Type Of Turret 1 Position W/ATC Type of Turret Tool Holders BT# 40 Magazine Capacity 80 ATC Max. Tool Dia. W/ All Pockets Full 3.54" Max. Tool Dia. W/ Adjacent Pockets Empty 4.72" Max. Tool Length 9.84" Max. Tool Weight 15 lbs. Rotary Tool Spindle Speeds 6.000 RPM Rotary Tool Spindle Horsepower 10 ... moreHP AC Rotary Tool Torque 46 FT/LBS. Y-Axis Travel +/ 3.75" X- Axis Travel 18.70" Z- Axis Travel 46.06" B- Axis Travel-30 to 195 deg Rapid Traverse Rate(Y/X/Z) 1024/1181/1575 IPM Machine Weight 30.275 lbs. Equipped With: OKUMA OSP U100L CONTROL REAR OR FRONT EXIT CHIP CONVEYOR RENISHAW PROBE IN PROCESS GUAGING 10" 3 JAW CHUCK TAILSTOCK
|
|
|
Okuma CNC Systems, OSP5020L, OSP500L-G, Operation Manual 7th Edition
Okuma CNC Systems OSP 5020L. OSP500L-G, Operation Manual 7th Edition. Publication 3272-E-R1, used but in very good condition. Thanks for looking and good luck bidding.
|
|
|
CNC LATHE LIVE TOOLS OKUMA LU25 BB '97 4 AXIS TWIN TURRET OSP 7000L SYNCHRO TA
WE ALWAYS CONSIDER ALL"REASONABLE" OFFERS AND MANY ARE PROMPTLY ACCEPTED! We invite you to purchase or" make your best offer" on a CNC LATHE being a OKUMA LU 25-BBM 2ST-400" 4 AXIS" TURNING CENTER with" LIVE MILLING" The following specifications and many options: SPECIFICATIONS: Swing over Bed 650mm(25.59" Swing over Carriage 420mm(16.54" Swing over Cross-slide 330mm(12.99" Max. Turning Diameter x Length 16.54" x 15.75" Spindle Nose Type JIS A2-11 Through Spindle Hole 3.94" Spindle Speed 40- 2800 RPM M Spindle Speeds 50- 3000 RPM CROSS SLIDE(X-AXIS) Upper Axis Travel 210mm + 90mm. 8.27" + 3.54" Lower Axis Travel 130mm + 65mm. 5.12" + 2.56" Feedrate 0.00001- 39.37 IPR Rapid Feedrate 150000mm/min(590.55 IPM) CARRIAGE Z-AXIS Axis Travel Upper 725mm(28.54" ... moreAxis Travel Lower 660mm(25.98" Feedrate 0.00001- 39.37 IPR Rapid feedrate 20000mm(787.40 IPM) Turret Type Upper V12 Turret Type Lower V10 No. of Tools 22 OD Turning Tools 25mm(0.98" ID Turning Tools 40mm(1.57" Spindle Drive Motor 15/22kW(20/30 HP) Carriage feed(Z-Axis) 3.6kW(4.8 HP) Cross-slide Feed(X-Axis) Upper 3.6kW(4.8 HP) Cross-slide Feed(X-Axis) Lower 2.5kW(3.4 HP) Floor Space Required 147.44" x 85.58" Net Weight 15.400 lbs EQUIPPED WITH: OSP7000L CNC Controls Spindle Orientation C-Axis Contouring Complete With MacMan Animation. Load Monitor LAP4 User Task 2 320m Tape Storage Synchro Tapping 2 Sets Spare M-Codes Tool Life Management 2 Turrets 12-Position V-12 Upper Turret 10-Position V10 Lower Turret Coolant Pump and Tank Chip Conveyor Transformer CONDITION: Machine Appears to be in Good Running Condition! Mfg Date: 1997 Location: Mid West Can be inspected under power This CNC LATHE being a OKUMA LU 25-BBM 2ST-400" 4 AXIS" TURNING CENTER with" LIVE MILLING" is known to be in a"Good Used Condition" and can be inspected by calling 606 882 2765 for appointment. Please review our"Feedback and About Us" whe
|
|
|
OKUMA CNC Systems OSP7000L OSP700L Operation Manual (4th Ed.) 3811-E-R2 [PZD]
ITEM DESCRIPTION. OKUMA CNC Systems OSP7000L OSP700L Operation Manual(4th Edition) Aug. 1996 3811-E-R2 LE32-038-R4 3811-E. Condition: Used. Removed from equipment ABOUT US. Precision Zone. An authorized repair vendor and member of ICARTEAM. Is a full service repair company completing repairs in house. Precision Zone provides sales and service for a wide variety of industrial controls and equipment used in manufacturing and other industrial applications. We stock and sell a wide range of new. Recoinditioned and exchange products and parts available for immediate shipment from our warehouses in Illinois. What sets us apart is our ability to troubleshoot and solve customer problems through our experience and advanced technology. We are your one stop shop for new and repaired drives. Controls, monitors, motors, encoders, and other related products. ... moreOur main focus and goal is increasing our customers' production capabilities through the sales and service of high quality electronic components, controls, and engineered systems. To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch. Precision Zone offers the following: Competitive industry pricing Free evaluation of repairs(excluding rush orders) Free technical support Exchange programs available Our eBay store serves as an additional channel which we use to promote special offer items and remove excess inventory to help clear space for new product lines. Please feel free to browse our eBay store's categories: Please contact our customer service department at 800-551-4420 or 847-465-9060 to discover our product line capabilities. Ask questions or request technical support. All products are covered by our comprehensive warranty. Warranty terms and conditions are product specific. THANK YOU FOR VISITING OUR EBAY STORE! Payment Terms. Precision Zone ships worldwide and accepts PayPal and most Credit Cards. For Customer Service call 800-551-4420 or 847-465-9060. All items are priced each. All it
|
|
|
CNC LATHE OKUMA MAC TURN 30W 2000 ATC 40 TOOLS TOOLING PKG LIVE TOOLS CAT 40
WE REGULARLY LIST UP TO 5 OR MORE LISTINGS PER WEEK. WE BROKER THE MAJORITY OF MACHINES LISTED WHICH ALLOWS US TO OFFER OUR CUSTOMERS A LOWER PURCHASE PRICE. ADDITIONALLY THE MACHINES WE OFFER ARE ALWAYS UNDER POWER FOR INSPECTION. WE ALWAYS CONSIDER ALL REASONABLE OFFERS AND MANY ARE PROMPTLY ACCEPTED! You are invited to purchase or"MAKE YOUR BEST OFFER" ON A CNC LATHE being a 2000 OKUMA MAC TURN 30 W. ATC 40 TOOL CAPACITY. CAT#40. C AXIS 0.001 DEG" COOLANT THRU SPINDLE. RIGD TAPPING. TOOLING PACKAGE, LOW HOURS and with the following approximate specifications: SPECIFICATIONS; MACHINE MANUFACTURED. 2000 AND INSTALLED NEW. 2001 HOURS UNDER 12.000 SWING OVER COVERS.21.7" MAX MACHINING DIAMETER(XA/XB) 19.68"8.26" TRAVELS(XA/XB)16.93"5.51" ZA/ZB)42.91"39.37" Y)7.48" + 3.74"3.74" ... moreC)001 SPINDLE NOSE.A2-6 SPINDLE BORE.2.44" BAR CAPACITY.2.04" TOTAL SPEED RANGE.4.500 RPM SUB SPINDLE SPEED.6.000 RPM MILLING SPINDLE SPEED.6.000 RPM MAIN SPINDLE.20/15 HP TOOL CHANGER.40 ATC(CAT 40) EQUIPPED WITH: OSP 7000 CNC CONTROLS Y AXIS 8" CHUCK ON MAIN SPINDLE 6" CHUCK ON SUB SPINDLE 40 STATION TOOL CHANGER THRU SPINDLE COOLANT RS 232 RIG
|
|
|
OKUMA LNC-8C Cadet 2 Axis CNC Lathe 10" Chuck w/Chip Conveyor
OKUMA LNC-8C Cadet 2 Axis CNC Lathe $16.500 This machine is in good working condition. All it needs is some more coolant and it is ready to run. Downsizing shop, machine is no longer needed. Will assist in arranging shipping and loading. Must Go! 2 Axis· 10” Chuck· 12 Station Tool Changer· 2 ½ Bore· Chip Conveyor· New bearings in motor· OSP5020L CNC Control· OSP5020L/OSP500l-G Special Functions Manual& Alarms& Error Manual· Approximate Weight: 9.670 Lbs Machine being sold As Is. Buyer is responsible for shipping and loading Can assist in arranging shipping and loading Rigging and Hauling Not Included Thanks for Looking! Please email me with any questions. Will combine shipping when possible. Buyer to pay shipping costs and handling charges. Buyer should contact me within 3 days of auction ... moreclose. Payment must be made within 10 days of auction close. I prefer Paypal but will accept cash and cashiers check. No returns. Items sold as is Buyer assumes all responsibility for item once it is shipped.
|
|
|
Okuma LU-15 4-AXIS CNC TURNING CENTER(Milling)
OKUMA LU-15 4 AXIS CNC TURNING CENTER Okuma OSP 7000M Control. Swing Over Bed 20.9" Center Distance 23.6" Programmable Tailstock, 12 Position(Upper) 8 Postion(Lower) Turret, Milling, Impact LU-15, Tool Setter, 3 Phase, 220 Supply Voltage, 60Hz Frequency. BUYER IS RESPONSIBLE FOR THEIR OWN TRANSPORTATION AND FREIGHT COST, RIGGING, PICK-UP ETC. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13ef2606e26-0xf3-
|
|
|
Okuma LU-25 IMPACT 4-AXIS CNC TURNING Lathe
Okuma LU-25 IMPACT 4-AXIS CNC TURNING CENTER OSP 7000 Control. Bar Capacity 3.5" Swing Over Bed 22" TurningDiameter 16.8 Max, Turning Length 25.59" Max, Programmable Tailstock, 12Position(Upper) 8 Position(Lower) Turrets. Model: Okuma LU-25 Model Year 1994 BUYER IS RESPONSIBLE FOR THEIR OWNFREIGHT. RIGGING, PICK UP ETC.
|
|
|
Okuma 4-Axis CNC Turning Center LU35-2SC/850
Jack Stefano for more information 1.800.382.8322 or email; jack(at) fmsweb. com video available Check our 100% Feed Back! Specification Description Maximum swing over bed, 29.13" Maximum swing over carriage, 18.90" Maximum turning diameter- upper turret, 21.65" Maximum turning diameter- lower turret, 14.17" Travel XA- upper turret, 14.96" 10.83"+ 4.13" Travel XB- lower turret, 9.84" 7.09" + 2.76" Maximum ZA travel- upper turret, 36.22" Maximum ZB travel- lower turret, 34.44" Maximum work length- upper turret, 36.22" Spindle nose type, A2-8, Spindle bore, 3.54" Spindle speeds, 14-3200 RPM, Spindle drive, 50 HP/40 HP, Turret type- upper/lower, NC-V12/V10 Slotted, No. of tool stations- upper turret, 12(ID or OD) No. of tool stations- lower turret, 10(OD or OD) Rapid traverse ... morerates- X-axis, 591 IPM, Rapid traverse rates- Z-axis, 787 IPM, Feed rates for X& Z-axis, 000040- 39.3700 IPM, Tailstock quill taper, No. 5 MT, Quill diameter, 4.72" Quill stroke, 6.69" Approximate weight, 30.000 lbs, Machine height, 8'6" Equipped With: OSP7000L CNC Controls. NC Turret. 2 Saddle Machine. Electric Spindle Orientation. Spindle Max. IL. Cycle Time Reduction. OMI Message. Tape Data Input/Output. 60M Expanded Memory. Turret Position Compensation. Tool Life Management. NC Torque Limit. Inch/Metric Switchable. Animation. Load Monitor. MacMan. Lap 4. tool Nose Radius Compensation 2B. User Task 2. Expanded Auto Chamfering. Cycle Time Calculation. Electric Spindle Orientation. Center Work. Programmable Tailstock. Measure RS232C. Turret Air Blow. Chuck Grasp Confirmation. Tailstock Limit. Right Door One Body. Roof Door. Okuma Overhead Gantry System(OGL30) NC Loader Interface Type C. Automatic Central Lubrication. Emergency Stop Alarm A. M/C Interference. Hand In/Out Hold. Hand A. Hand B. A Clamp. Miss Chuck. B Clamp. Miss Chuck. Coolant. Chip Conveyor. Manuals and Drawings. You can see this before you buy it. Leasing Available. We arrange shipping.
|
|
|
1998 Okuma LT CNC Lathe 20" Axis Capacity ASI3500 Wheel Chuck 12 Stat, Warranty
1998 Okuma LT CNC Turning Center with 20" Axis Capacity Manufacturer: OKUMA Product Condition: Run under power. Tested, ready to ship. Warranty Included Contact: sales@nemachinery.com Specification Description CAPACITY, Max Turing Diameter, 24.41" Max Turning Length, 11.02" Max Workpiece, Max 20" Car Wheel) SPINDLE, Speed Range, 200-3000, No. of Speeds, Infinitely Variable, Spindle Nose, JIS A2-8, Spindle Bore Diameter, 2.09" TRAVELS, X Axis, 16.54" Z Axis, 13.78" Rapids Traverse(X-Z) 787ipm, TURRETS, Turret Type, V12, OD Tool Shank, 1"x 1" ID Tool Shank, 1-1/4" Indexing Time sec. L4, MOTORS, Spindle(20min/cont) 50/40hp, X-Axis, 8 HP, Z-Axis, 5 HP, Turret Rotation, 2.4 HP, Coolant System, 1.1 HP, MACHINE SIZE, Height, 78.74" Floor Space, 110.63" x 108.66" Weight, 20.900lb, Equipped ... moreWith: 12 Station Turret. ASI3500 Wheel Chuck. PAYMENT: Payments can be made by Bank Wire. Check, Paypal, Money Order or Cashier's Check. All payments must be received within 7 business days. We look forward to doing business with you. SHIPPING: Buyer can schedule pick up via TRUCK or we can schedule delivery for you and add the freight cost. Buyer is responsible or assumes liability that machine gets properly tied down and shipped safely. Buyer can have equipment shipped anywhere Worldwide. Buyer is responsible for all arrangements and costs related to shipping. Any relevant duties. Customs, brokerage fees, taxes, and charges are the buyers responsibility. These charges may be collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. Available for pick-up on Monday to Friday during business hours and on Saturday if requested. Feel free to contact us if you have any questions or would like more information.
|
|
|
OKUMA CNC MILL MAC COOLING UNIT 40CP-FR-05-61 DATE 1999
USED MAC CO. LTD JAPAN.COOLING UNIT.FORM MAC 40CP-FR-05-61,45 KW,DATE 1999,3PHASE, 200V.50/60HZ.HAVE NOT SEEN UNIT WORK.UNIT TO BE SHIPPED MOTOR FREIGHT AT BUYERS EXPENSE.CALL 501-378-0241 FOR MORE INFO. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13f15eaada4-0xe9-
|
|
|
Okuma Crown 762S-BB CNC Lathe 2000, Okuma OSP700L Control, 10" Chuck, Tail Stock
Okuma Crown 762S-BB CNC Lathe 2000 Okuma OSP700L Control 10" Chuck Tail Stock Category: CNC Turning Centers Sub Category: Horizontal Turning CNC Stock No. 4932 Age: 2000 Serial# 1796 Location: Fullerton. CA. Chuck 10" Swing Over Bed 21.6" Max. Cutting Diameter 10.63" Max. Machining Length 20.47" X-Axis Travel 7.28" Z-Axis Travel 20.47" Spindle Nose/ Bore A2-8" 3.1" Bar Capacity 2.5" Spindle Speed 3.500 RPM Spindle Motor 15 HP Tailstock Quill Diameter/ Center 3.54" MT#5 Approx. Dimensions 105" x 70" x 71" Approx. Weight 9.700 lbs. Equipped With: Okuma OSP700L CNC Control. Tailstock, 2) Boring Bar Holders, 2) Blocks, 12) Wedges, and Manuals. Price… $44.500.00 Contact Information: ACT MACHINERY 714-441-1992 PLEASE SEE TERMS AND CONDITIONS BELOW Machines are subject to ACT ... moreInc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. STANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. PAYMENTS: We will email you an invoice for the full amount owed. Including shipping. Please Do Not Pay until you have received our invoice. Items not paid within 10 days from the end of sale. Will be re-listed. Payments by check will be held for 1
|
|
|
OKUMA CNC Lathe LU15 OSP7000L Electrical Drawing [PZD]
ITEM DESCRIPTION. OKUMA CNC Lathe LU15 OSP7000L Electrical Drawing. Condition: Used. Removed from equipment ABOUT US. Precision Zone. An authorized repair vendor and member of ICARTEAM. Is a full service repair company completing repairs in house. Precision Zone provides sales and service for a wide variety of industrial controls and equipment used in manufacturing and other industrial applications. We stock and sell a wide range of new. Recoinditioned and exchange products and parts available for immediate shipment from our warehouses in Illinois. What sets us apart is our ability to troubleshoot and solve customer problems through our experience and advanced technology. We are your one stop shop for new and repaired drives. Controls, monitors, motors, encoders, and other related products. Our main focus and goal is increasing our customers' ... moreproduction capabilities through the sales and service of high quality electronic components, controls, and engineered systems. To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch. Precision Zone offers the following: Competitive industry pricing Free evaluation of repairs(excluding rush orders) Free technical support Exchange programs available Our eBay store serves as an additional channel which we use to promote special offer items and remove excess inventory to help clear space for new product lines. Please feel free to browse our eBay store's categories: Please contact our customer service department at 800-551-4420 or 847-465-9060 to discover our product line capabilities. Ask questions or request technical support. All products are covered by our comprehensive warranty. Warranty terms and conditions are product specific. THANK YOU FOR VISITING OUR EBAY STORE! Payment Terms. Precision Zone ships worldwide and accepts PayPal and most Credit Cards. For Customer Service call 800-551-4420 or 847-465-9060. All items are priced each. All items are subject to availability and passing our QA insp
|
|
|
OKUMA LC20 NC Lathe w/ OSP 3000L CNC Parts Book [PZD]
ITEM DESCRIPTION. OKUMA LC20 NC Lathe w/ OSP 3000L CNC Parts Book. Condition: Used. Removed from equipment ABOUT US. Precision Zone. An authorized repair vendor and member of ICARTEAM. Is a full service repair company completing repairs in house. Precision Zone provides sales and service for a wide variety of industrial controls and equipment used in manufacturing and other industrial applications. We stock and sell a wide range of new. Recoinditioned and exchange products and parts available for immediate shipment from our warehouses in Illinois. What sets us apart is our ability to troubleshoot and solve customer problems through our experience and advanced technology. We are your one stop shop for new and repaired drives. Controls, monitors, motors, encoders, and other related products. Our main focus and goal is increasing our customers' ... moreproduction capabilities through the sales and service of high quality electronic components, controls, and engineered systems. To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch. Precision Zone offers the following: Competitive industry pricing Free evaluation of repairs(excluding rush orders) Free technical support Exchange programs available Our eBay store serves as an additional channel which we use to promote special offer items and remove excess inventory to help clear space for new product lines. Please feel free to browse our eBay store's categories: Please contact our customer service department at 800-551-4420 or 847-465-9060 to discover our product line capabilities. Ask questions or request technical support. All products are covered by our comprehensive warranty. Warranty terms and conditions are product specific. THANK YOU FOR VISITING OUR EBAY STORE! Payment Terms. Precision Zone ships worldwide and accepts PayPal and most Credit Cards. For Customer Service call 800-551-4420 or 847-465-9060. All items are priced each. All items are subject to availability and passing our QA inspe
|
|
|
OKUMA MCV4020 CNC VERTICAL MACHINING CENTER 2001 MANY OPTIONS EX COND
WE ALWAYS CONSIDER ALL REASONABLE OFFERS AND MANY ARE PROMPTLY ACCEPTED! You are invited to purchase or"MAKE YOUR BEST OFFER" ON A OKUMA 2001 MC40 20 CNC VERTICAL MACHINING CENTER, Hi G/Hi-TOLERANCE FUN CTION. MAC MAN UTILIZATION TRACKING and MORE OPTIONS with the following approximate specifications: Approximate Specifications: Normal 0 false false false EN-US X-NONE X-NONE Table Dimensions.48.37” X 20” X Axis Travel. 40” Y Axis Travel.20.08” Z Axis Travel.17.72” Spindle End To Table Surface.6.30”24.02” Max Load Cap.1.500 lbs. Spindle Taper.CAT#40. Speed Range.40-8000 RPM. Spindle Motor.20 HP. ATC Capacity(Swing Arm)20 Tools. Max Tool Dia.3.54” w-Adjacent 4.92” w/o Adjacent. Max Tool Weight.17.6 lbs. Tool Change Time.1.5 sec T-T 3.8 sec C-C. Rapid Travis XY/Z.1.417 ipm/ 1,191 ipm. Machine Dimensions HxWxD.112.5” 127.95 107.08. ... moreMachine Weight.15.400 lbs. EQUIPPED WITH: OSP U10M Control. Swing Arm ATC. Hi G/Hi-Cut Tolerance Function. MacMan Utilization Tracking. Cycle Time Reduction. Tool Life Management. Shower Coolant. Com. Var. 200 sets. CONDITION: Machine Appears to in Excellent Condition! Mfg Date: 2001 Location: Southwestern. OHIO Can be inspected under power Will load at no-cost to buyer! This CNC VERTICAL MACHINING CENTER being a OKUMA 2001 MC40 20. Hi G/Hi-TOLERANCE FUN CTION. MAC MAN UTILIZATION TRACKING and MORE OPTIONS is known to be in a"Very Good Used Condition" and can be inspected by calling 606 882 2765 for appointment. Please review our"Feedback and About Us" where you will find
|
|
|
1997 OKUMA CADET LNC-8T CNC LATHE TURNING CENTER
1997 Okuma Cadet LNC-8T CNC Lathe Description: In excellent working& cosmetic condition! Japanese heavy-duty iron! Okuma machines are made to last! This is a chucker type machine with no tailstock. Features an Okuma OSP700L Control. Chip Conveyor, 8" Hydraulic chuck and much more. The spindle& axes on this machine run very smooth. This machine has been well taken care of. We re-painted the machine with a special 2-part polyurethane paint guaranteed to last. This is no slouch paint job. Comes with everything as listed below. The new owner of this machine will be pleased. We at Rohner Machinery spend the time and go through all of our machines to insure that everything is working properly. We are a complete rebuild. Retrofit& repair shop as well so we have the capability to replace or repair anything from servo drives to ball ... morescrews to complete spindle assemblies. Check out our feedback& bid with confidence! Check out the short video below of the machine under power: Okuma LNC-8T CNC Chucker Turning Center Manufacturer: Okuma Model: Cadet LNC-8T S/N: 0809D837 Year: 1997 Specifications: Swing 15.75" Max cutting diameter 12" Max Cutting length 19.69" X-Axis Travel 7.28" Z-Axis Travel 20.47" Spindle Mount A2-6 Spindle More 3" Spindle Bar capacity 2.5" Spindle Speeds(Variable) 35-4200 Spindle Drive Motor 15/10 HP. 220V, 3PH Turret Capacity 12-Station Rapid Traverse 590 ipm Machine weight 10.000 Equipped With: Chip conveyor Kitagawa NLT08 8" 2-Jaw Hydraulic Chuck Chuck Foot Control OSP700L Control Floppy Drive(2) ID Holders(1) OD Holder Manual The above information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight costs. Email us with any technical questions you may have or email with zip for a freight quote. CA residents subject to sales tax. Freight and removal are the responsibility of the buyer. Feel free to contac
|
|
|
OKUMA CNC OSP5020M OSP500M-G Programming Manual 3336-E-R2 ME33-002-R3 [PZD]
ITEM DESCRIPTION. Description: OKUMA CNC Systems OSP5020M OSP500M-G Programming Manual(3rd Edition) December 1991, OKUMA CNC Systems OSP5020M OSP500M-G Programming Manual(3rd Edition) December 1991 3336-E-R2 ME33-002-R3 9208-04-200. Condition: Used. Removed from equipment ABOUT US. Precision Zone. An authorized repair vendor and member of ICARTEAM. Is a full service repair company completing repairs in house. Precision Zone provides sales and service for a wide variety of industrial controls and equipment used in manufacturing and other industrial applications. We stock and sell a wide range of new. Recoinditioned and exchange products and parts available for immediate shipment from our warehouses in Illinois. What sets us apart is our ability to troubleshoot and solve customer problems through our experience and advanced technology. We are ... moreyour one stop shop for new and repaired drives. Controls, monitors, motors, encoders, and other related products. Our main focus and goal is increasing our customers' production capabilities through the sales and service of high quality electronic components, controls, and engineered systems. To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch. Precision Zone offers the following: Competitive industry pricing Free evaluation of repairs(excluding rush orders) Free technical support Exchange programs available Our eBay store serves as an additional channel which we use to promote special offer items and remove excess inventory to help clear space for new product lines. Please feel free to browse our eBay store's categories: Please contact our customer service department at 800-551-4420 or 847-465-9060 to discover our product line capabilities. Ask questions or request technical support. All products are covered by our comprehensive warranty. Warranty terms and conditions are product specific. THANK YOU FOR VISITING OUR EBAY STORE! Payment Terms. Precision Zone ships worldwide and accepts PayPal a
|
|
|
Okuma Cadet LNC-8-2 Axis CNC Turning Machine
Item#2543- Okuma Cadet LNC-8-2 Axis CNC Turning Machine Equipped With: OSP5020L CNC Control Lap 4 Tool Nose Radius Compensation Inch/Metric Switchable Color Graphics. One Touch IGF Color Graphics RS232 8" 3-Jaw Kitagawa Chuck Hole thru Cylinder Tailstock Chip Conveyor. Foot Pedal Transformer Mist Collector Machine Specifications: Maximum swing over saddle 15.75" Maximum Turning Diameter 9.84" Maximum Turning Length 19.68" Z-Axis Travel. Longitudinal 20.47" X-Axis Travel 6.89" Spindle Nose Type A2-6 Spindle Diameter 3.94" Spindle Bore 2" Spindle Speeds(Infinitely Variable) 75-4200 RPM Feed Rates.0001-39.37 IPR Rapid Feed Rate 590.55 IPM Turret Positions 12 Approximate Weight 9.670 lbs New: 1993 Shipping Point: IL Price: $14.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included ... moreCall On Target with all your equipment questions-203-441-4655
|
|
|
OKUMA LB-15 2-AXIS CNC LATHE TURNING CENTER, WILL SHIP WORLDWIDE
GRAY MACHINERY COMPANY. 800-292-1493* 847-537-7700* FAX 847-537-9307 77 E. PALATINE ROAD* PROSPECT HEIGHTS. IL 60070-1811 WEB: www.graymachinery.com* EMAIL: sales@graymachinery.com PROPOSAL Stock 00010998 Quote# 279630 We are pleased to submit for your consideration: OKUMA LB-15 2-AXIS CNC LATHE TURNING CENTER SERIAL NUMBER N/A NEW 1988 GENERAL SPECIFICATIONS: Number of controlled axes 2 Swing over bed 15.75" Max. turning diameter 8.27" Max. work length 19.69" Main spindle: Spindle diameter/ bore diameter 3.94" 2.20" Spindle nose A2-6 Internal taper of spindle MT No. 6 Range od spindle speed 75- 4200 RPM Cross slide& carriage: Cross-slide trvel(X-axis) 5.91" Longitudinal travel(Z-axis) 20.47" Cutting feedrate(X-Z) 0001- 40.00 IPR Rapid traverse speed(X.Z) 472 IPM DC Servo motor 2.4 HP Turret: 12 Positions ... moreHydraulic tailstock: Quill dia.stroke 3.54" 4.72" Center taper MT No. 5 Main motor AC 10/15 HP Floor space 74" x 108" Net weight 9.900 LBS MOTOR SPECIFICATIONS: 10/15 HP AC Motor& Electrical Controls(cont. 30-min) 220/440 Volt 3 Phase EQUIPPED WITH: OSP 5000L-G CNC control 8" 3-Jaw chuck 12 Position turret with toolholders Tailstock Chip conveyor Misc. turret toolholders
|
|
|
4 OKUMA ABSOLUTE ENCODERS, TYPE FC CNC OKUMA. MANUFACTURED 2004
All encoders have been tested and work perfectly. They replace older F and E encoders. They are deemed universal and is what Okuma sells now.
|
|
|
Okuma L250E CNC Lathe Tailstock Unit L250-E L 250 E
New Page 2 DESCRIPTION: You are bidding on a Okuma L250E CNC Lathe Tailstock. Unfortunately we are unable to test this item fully and will sell it AS IS. meaning it may or may not function properly. That is unknown due to the fact that we are unable to test this item properly. NO returns or refunds on this item so please ask all questions prior to bidding. PHYSICAL CONDITION: Used This item has the typical signs of use. Such as scratches, small marks, a few minor dings, scuffs, etc. See pictures for details of item and condition. Click on them for a larger view. FUNCTIONALITY: UNABLE TO TEST. Sold AS IS(see above) AUCTION INCLUDES: Okuma L250E CNC Lathe Tailstock unit ONLY as pictured. Auction items include only what is in the eBay picture(s) unless otherwise specified above. Including manuals, cables, cords, SD cards, power supplies, accessories, ... moreother parts, etc. D1008 RETURN POLICY Unfortunately we are unable to test this item fully and will sell it AS IS. meaning it may or may not function properly. That is unknown due to the fact that we are unable to test this item properly. NO returns or refunds on this item so please ask all questions prior to bidding. SHIPPING INFO Our goal is to ship your item within 1-2 business days after payment has cleared. Freight items may take 2-3 business days. For your and our safety, we only ship to the confirmed Paypal address(AKA billing address) if you choose that option. Need it shipped elsewhere? Pay via cashiers check. o) Let's hope this does not occur. However in the event that an item is damaged during transit, buyer must notate that with the driver before signing for the package. Keep the box and all packaging materials and contact us within 2 business days of receipt of item. The flat rate listed is for delivery to the continental US only. Local Buyers may pick up items Mon- Fri between 9:00am and 4:00pm. Pay for the item in full first. Please, unless you are paying with cash. The shipping charge will be waived if the item is picked up from our facili
|
|
|
8632 OKUMA MX-55VB CNC VMC, 1998, 50T, 48 Tools, 41" x 22" x 25", Rebuilt Spin.
1998 Okuma MX-55VB CNC Vertical Machining Center Stock# 008632 Serial# 10070515 Year: 1998 Control: Okuma OSPU10M CNC Control Specifications: Travels. 41.34" x 22.05" x 25" X,Y,Z) Z-Extended Travel Table Size. 51.18" x 22.05" Spindle Speed. 6,000 Spindle Taper. CAT-50 Spindle Motor. 15HP Tool Changer. 48 Stations Power. 220/480V with Multi Tap Transformer Weight. 16000lbs. Machine Dimensions. 120" x 131" x 116" LxWxH) Features: Newly Rebuilt 50 Taper Spindle. 0-Hours 48 Station ATC SMW Manual Pallet Change System(If desirable) Z-Axis Extended Travel Renishaw Tool Probe System(Buyer to Verify if Complete) Chip Conveyor System Coolant Pan Manuals Purchasing Information: There is a chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before ... morepurchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check and paypal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizing seperately and it is not included with the sale price. We'll quote per customer requirements. Customer shipping method& machine design. We are a stocking dealer of new and used machine tools located in West Michigan and are members of the MDNA. We have over 1.000 different manual and CNC machines in stock for both fabrication and m
|
|
|
12" dia. Chuck Okuma LC30 4-Axis Simulturn CNC Lathe with MDI
We are liquidating this very nice Okuma. Used in a large Aerospace Facility. This machine is in great condition, under power and cutting parts. If you have any questions please call Rich at 760-633-4801 OKUMA LC30-2SC 4-Axis"Simulturn" CNC Turning Center Specification Description MAXIMUM SWING OVER BED: 19.69" MAXIMUM TURNING DIAMETER: 17.7" MAXIMUM TURNING LENGTH: 39.37" CHUCK SIZE: 12" NUMBER OF TURRETS: 2 TURRET TOOLING STATIONS: 12 + 8 SPINDLE SPEEDS: 15-3000 RPM SPINDLE NOSE: A2-8 SPINDLE BORE DIAMETER: 3.03" SPINDLE MOTOR: 40/30 HP MAXIMUM BAR CAPACITY: 2.5" FLOOR SPACE REQUIRED: LxWxH) 102"x89"x77" NET WEIGHT: APPROX. 20.000 LBS Equipped With: Control: OSP 5000LG with MDI 2-TURRETS UPPER& LOWER 12" CHUCK CHIP CONVEYOR MDI CLICK ON BUTTON BELOW TO BE INCLUDED ON THE EMC ... moreLEASING COMPANY EMAIL LIST OF MACHINES TO BE LIQUIDATED SHORTLY. Join Email List For you can trust
|
|
|
Okuma Multus B300 C 6 Axis CNC Lathe Live Tooling BB Mac Y Center Turn integrex
OKUMA MULTUS B300C"BB" 6-AXIS CNC TURNING CENTER GENERAL SPECIFICATIONS: MANUFACTURE DATE/ INSTALLED NEW 2006/ 2007 MAX. SWING OVER CARRIAGE 24.8" MAX. MACHINING DIAMETER 17.72" DISTANCE BETWEEN CENTERS 43.43" w/CHUCK) X AXIS TRAVEL 22.05" Y AXIS TRAVEL 6.3" +/ 3.15" Z AXIS TRAVEL 36.81" C AXIS(SPINDLE INDEXING POS. ROTATION) 0.001 DEG. FULL CONT. B AXIS(TILTING LIVE"H1" MILLING HEAD) 225 DEG. ADJUST. ANGLE TILTING LIVE MILLING SPINDLE POSITIONS 0.001 DEG. INDEX/ROT. TILTING LIVE MILLING SPINDLE SPEEDS 50- 6000 RPM TILTING LIVE MILLING SPINDLE MOTOR 15 HP RAPID TRAVERSE RATE X& Z AXES 1575 IPM MAIN SPINDLE MOTOR 30 HP MAIN SPINDLE SPEEDS 38- 3800 RPM MAIN SPINDLE BORE/ BAR CAPACITY 3.15" 2.77" MAIN SPINDLE NOSE A2-8 TOOL CHANGER MAGAZINE CAPACITY 40 STATION ATC DIMENSIONS. ... moreAPPROX. 148"L x 81"W x 99"H WEIGHT. APPROX. 22.400 LBS EQUIPPED WITH: OKUMA OSP P200L"THINC" FULL CONVERSATIONAL CNC CONTROL w/40 GB HARD DRIVE& 3D COLOR ANIMATION, ETHERNET& USB PORTS INTERFACES FOR DNC OPERATION, 10" 3-JAW HYDRAULIC CHUCK. HELICAL& SLOPE CUTTING, BIG BORE" 30 HP) SPINDLE OPTION(INTEGRAL DIRECT DRIVE) PROGRAMMABLE TAILSTOCK. MAC-MAN UTILIZATION MONITOR, 15 HP TILTING/SWIVEL LIVE TOOL HEAD/SPINDLE(H1 TURRET) SLANT CUTTING w/B-AXIS. REMOTE JOG HANDLE/WHEEL, TOUCHSETTER-M TOOL EYE(AUTOMATIC TOOL PRESETTER ARM) AUTO-TOOL CHANGER(40 STATIONS) X-Y PLANE CONVERSION, THRU-SPINDLE COOLANT SYSTEM(STANDARD PRESSURE) EXTERNAL CHIP CONVEYOR. OIL COOLER FOR BOTH SPINDLES, RIGID SYNCHRO. TAPPING. CAPTO-C6 TOOLHOLDING SYSTEM, ELIMINATES REPETITIVE TOOL-TURRET FIXTURING* LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this lathe prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer wit
|
|
|
2000 OKUMA ES-V4020 CNC MILL, VERTICAL MACHINING CENTER
Champion Machinery. Inc. Quote Charlotte. NC(803)548-8000 Chicago. IL(630)584-8885 2000 OKUMA ES-V4020 Travel: X-Axis 40" Y-Axis 20" Z-Axis 20.59" Table Size 47.24" x 20.08" Spindle Speed 50- 8000 RPM Spindle Taper Cat 40 Spindle Nose to Table Top 7.87" 28.46" Spindle Motor 15/ 10/ 7.5 HP AC Tools 20 Table Load Capacity 1500 lbs. Rapid Traverse Rates 984 IPM Max Tool Diameter 3.54" 6.3" Max Tool Length 11.81" Max Tool Weight 17.6 lbs. Machine Dimensions(L x W x H) 109.8" x 78.2" x 116.1" Machine Weight 9920 lbs. FEATURES: OKUMA OSP-U10M CNC CONTROL 10.4" Monochrome LCD Rigid Tapping Helical Interpolation Graphic Display Animation MacMan Remote Manual Pulse Generator 3.5" Floppy Disc Drive Inch/ Metric Switchable Hennig Chip Conveyor(Right Side Exit) Servo Driven Tool ... moreMagazine One Direction Position Change Work Coordinates Exact Stop Programming Help 20 Sets Work Coordinates 100 Sets Tool Data System Variables DNC-B Point Calculation Additional Pattern Cycle Coordinate Calculation Graphic Imap Hi-G Hi-Cut Mfg Date January 2000 Viewing this quote requires acceptance of our.
|
|
|
OKUMA MC3-V CNC VERTICAL MILL CONTROL ARM FOR CAROUSEL
ARPI MACHINE SALES. OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE A SUN VALLEY CA 91352 OFFICE: 818 890-7625 DISCLAIMER: AFTER PURCHASING THIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDELENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE AND ACTION WILL BE TAKEN AGAINST THESE BUYERS THRU EBAY POLICIES ... moreBY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL. THANK YO 818 298 9685 EMAIL: WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION OKUMA MC3-V CNC VERTICAL MILL CONTROL ARM FOR CAROUSEL THEIS CAME OFF A 1986 OKUMA MC3V CNC VERTICAL MILL CAN SEPARATE IF INTERESTED A COUPLE. THEY SELL FOR ABOUT $350 EACH NEW. CALIFORNIA BUYERS TO PAY 9.75% SALES TAX SHIPPING& HANDLING: SHIPPING BY UPS IN THE 48 CONTINENTAL STATES. PAYMENT INSTRUCTION: Payment can be made with paypal. Business or personal check or wire transfer. All payments must be received by Arpi Machine Sales within 7 days. Payments must be sent to ARPI MACHINE SALES at 12165 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 298-9685 or by e-mail. TERMS AND CONDITIONS: If payment is not received within 7 days. ARPI MACHINE SALES has the right
|
|
|
Okuma CNC Parts EIO Circuit Board Lot
Used but working parts. Auction includes the following: 1 panel) Okuma ATC Display Panel E0189-653-014(1 panel) Okuma Panel E089-653-015(1 Board) Okuma Panex Card3 E4809-032-492-A(1 Board) Okuma Panex Card3 E4809-032-492-B(2 Boards) Okuma Panex Card2 E4809-032-487(4 Boards) Okuma OSP EIO Card E0241-653-033B(3 Boards) Okuma OSP EIO Card E0241-653-033C(2 Boards) Okuma EIO Card E0241-653-077
|
|
|
Okuma LB15 CNC Lathe - See Video - No Reserve !
USED MODEL LB-15 OKUMA CNC LATHE COMPLETE WITH OSP 5000 CONTROL WITH IGF. Good condition. Under power. Email with questions or you can call 609-403-0661 See Video Below This machine is a chucker. No Tailstock. SPINDLE NOSE…A2-6 SPINDLE BORE…2” CENTERS…20. 47” TURRET…12 STATION SPINDLE SPEEDS…4200 RPM APPROX. DIMENSIONS…105” X 73” APPROX. WEIGHT…9200 LBS. EQUIPPED WITH 10” KITAGAWA CHUCK CHIP CONVEYOR MANUALS Loading Fee $750* Email with questions or you can call 609-403-0661 Other Okuma Equipment available. 2001 OKUMA LU-25M 15" Chuck. Live Milling, OSP U-100L Control $75,000 1992 OKUMA LC-30 with 5000 LG Control $16.000 1989 Okuma LB12. With 8" Chuck, Tailstock, 5000 Control $11,000 1998 OKUMA CADET 1420. 12" Chuck, 50" centers, Steadyrest, OSP 700L. $49,000 2000 OKUMA CROWN 1420. 12" Chuck, 4.4" Bore, Tailstock, ... moreU10L Control, $59,000 2000 OKUMA CROWN 1420. 12" Chuck, 3.4" Bore, 50" Centers, Hyd. Steady, Tailstock, U10L Control, $62,000 2004 Okuma LVT300M Vertical lathe with E100L control. Live Milling $49K 1998 Okuma LFS15-1SP lathe with OSP700 control. $15,000 1996 Okuma MX-45 VAE CNC Vertical Machining Center w/ OSP 700M. $28,000 1988 Okuma MC-3VA CNC Vertical Machining Center w/ OSP 5000 control. $13,000 1996 Okuma MC500H HMC. Cat 50, 5000 rpm, 72 ATC, OSP700M control. $49K 1999 Okuma MX50-HB HMC. With OSP U100M control, $69,000 1998 Okuma GP-25 CNC Cylindrical Grinder. $149K
|
|
|
Okuma Cadet LNC-8W CNC Turning Center, OSP 5020L Control, Sub Spindle, 10" Chuck
Okuma Cadet LNC-8W CNC Turning Center OSP 5020L CNC Control Sub Spindle 10" Chuck Chip Conveyor Category: CNC Turning Centers Sub Category: Horizontal Turning CNC Stock No. 5115 Location: CA Swing Over Bed 15.75" Main Spindle Chuck 10" Sub Spindle Chuck 5" Bar Capacity 2.5" Max. Turning Diameter 9.8" Spindle Speed 3.500 RPM Sub Spindle Speed 4.200 RPM Turret 12 Station Equipped With: OSP 5020L CNC Control. Sub Spindle, 10" Chuck, and Chip Conveyor. Price… $22.500.00 Contact Information: ACT MACHINERY 714-441-1992 PLEASE SEE TERMS AND CONDITIONS BELOW Machines are subject to ACT Inc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any ... morekind whatsoever, specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. STANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. PAYMENTS: We will email you an invoice for the full amount owed. Including shipping. Please Do Not Pay until you have received our invoice. Items not paid within 10 days from the end of sale. Will be re-listed. Payments by check will be held for 10 business days until check clears. ACT Inc. accepts all major credit cards with a 3% Surcharge: Visa. Master Card, and American Express. We also accept Pay Pal as payment of goods purchased and payment upon pickup. SHIPPING; Cust
|
|
|
Okuma LB12 CNC Lathe 1999, Okuma OSP500L-G Control, 8" Chuck, Tail Stock
Okuma LB12 1999 CNC Lathe Okuma OSP 500L-G Control 8" Chuck Programmable Tailstock Category: CNC Turning Centers Sub Category: CNC Lathes Stock No. 5102 Age: 1999 Serial# 0499 Location: Fullerton. CA. Max. Swing Over Bed 15.75" Max. Cutting Diameter 7.87" Bar Capacity 1.75" Max. Machining Length 14.75" X-Axis Travel 5.89" Y-Axis Travel 15.47" Rapid Traverse Rate 472 IPM Bore 2.2" Spindle Speed 4200 RPM Spindle Motor 10/7.5 HP AC Turret Type 8 Position Approx. Dimensions 165" x 77" x 73" Approx. Weight 9.900 lbs. Equipped With: Okuma OSP 500L-G CNC Control. And Programmable Tail Stock. Price… $7.500.00 Contact Information: ACT MACHINERY 714-441-1992 PLEASE SEE TERMS AND CONDITIONS BELOW Machines are subject to ACT Inc’s terms& conditions below and notes: The goods sold are second hand ... moregoods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. STANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. PAYMENTS: We will email you an invoice for the full amount owed. Including shipping. Please Do Not Pay until you have received our invoice. Items not paid within 10 days from the end of sale. Will be re-listed. Payments by check will be held for 10 business days until check clears. ACT Inc. accepts all major credit ca
|
|
|
25 Pcs) High Perf Carbide Endmills - For Haas, Okuma, Mazak, Bridgeport, CNC
25 pcs) High Performance solid carbide endmills. In good used condition. No junk here! If not satisfied you may return entire lot for refund(less shipping) 3) 1/2" 4 Flute, 1) 1/2" 2 X-long flute for aluminum, 1) 3/8" 3 Flute for aluminum, 3) 3/8" 4 Flute, 2) 3/8" 2 Flute for aluminum, 1) 1/4" X-Long Hanita Hi-Performance, 4) 1/4" 4 Flute, 1) 3/16" 2 Flute for aluminum, 2) 1/8" Hi-Roc Drills, 4) 1/8" 4 Flute, 1) 3/32 4 flute, 1) 1/32" 4 flute, 1) 1/2" Carbide C-sink, Don't miss out on my.99 starting- NO RESERVE AUCTION! Terms of sale- Auction must be paid for within 10 days of end. I will accept paypal up to $500- after that you can put it on Visa. MC or Discover thru our merchant services account. Postal MO or Walmart MO or personal check accepted. Personal checks will be held ... more10 prior to shipment.
|
|
|
72 Position 5c collet rack - Haas CNC mill, Mazak, Mori-seki, Okuma
72 position 5c collet rack. Will ship dis-assembled. Don't miss out on my.99 starting- NO RESERVE AUCTIONs! Terms of sale- Auction must be paid for within 10 days of end. I will accept paypal up to $500- after that you can put it on Visa. MC or Discover thru our merchant services account. Postal MO or Walmart MO or personal check accepted. Personal checks will be held 10 prior to shipment.
|
|
|
Steady Rest for 15" Leblonde lathe - Haas CNC mill, Mazak, Mori-seki, Okuma,
Very nice steady rest for 15" Leblonde lathe. Excellent condition. Don't miss out on my.99 starting- NO RESERVE AUCTION! Terms of sale- Auction must be paid for within 10 days of end. I will accept paypal up to $500- after that you can put it on Visa. MC or Discover thru our merchant services account. Postal MO or Walmart MO or personal check accepted. Personal checks will be held 10 prior to shipment. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-1448a5b53a8-0xf5-
|
|
|
TMX CAT 40 0-1/2" Drill Chuck - Haas CNC mill, Mazak, Mori-seki, Okuma,
1) TMX CAT40 0-1/2" Integral shank keyless chuck. Good condition. Chuck is stiff, but opens and closes fully. Don't miss out on my.99 starting- NO RESERVE AUCTION! Terms of sale- Auction must be paid for within 10 days of end. I will accept paypal up to $500- after that you can put it on Visa. MC or Discover thru our merchant services account. Postal MO or Walmart MO or personal check accepted. Personal checks will be held 10 prior to shipment. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1448a5b539a-0xf8-
|
|
|
8) TG 100 Collets - Haas CNC mill, Mazak, Mori-seki, Okuma,
8) TG100 Collets. 1/8, 2) 3/8, 2) 1/2, 3/4, 1, 1/4, Don't miss out on my.99 starting- NO RESERVE AUCTION! Terms of sale- Auction must be paid for within 10 days of end. I will accept paypal up to $500- after that you can put it on Visa. MC or Discover thru our merchant services account. Postal MO or Walmart MO or personal check accepted. Personal checks will be held 10 prior to shipment.
|
|
|
1" Kennametal Thread mill w/ inserts - Haas CNC mill, Mazak, Mori-seki, Okuma,
1" Kennametal Threadmill in near new condition. Includes 5) 16 TPI inserts! Don't miss out on my.99 starting- NO RESERVE AUCTION! Terms of sale- Auction must be paid for within 10 days of end. I will accept paypal up to $500- after that you can put it on Visa. MC or Discover thru our merchant services account. Postal MO or Walmart MO or personal check accepted. Personal checks will be held 10 prior to shipment.
|
|
|
OKUMA ID Turret block coolant caps- Haas CNC, Mazak, Mori-seki, Doosan
3) Okuma ID holder coolant cap plates. Came off LB3000 but should fit all Okuma bolt on type turrets. Don't miss out on my.99 starting- NO RESERVE AUCTION! Terms of sale- Auction must be paid for within 10 days of end. I will accept paypal up to $500- after that you can put it on Visa. MC or Discover thru our merchant services account. Postal MO or Walmart MO or personal check accepted. Personal checks will be held 10 prior to shipment.
|
|
|
Okuma Mori Seiki Matsuura CNC MILL MACHINE CENTERS ALL 3, 1 PRICE
MORI SEIKI MV-JR OKUMA MC-4VA MATSUURA RA-2 For sale. All three for one price! First is a Mori Seiki MV-jr. Year is 1986. 4 axis(indexer not included) Fanu 10M control. Needs a X axis motor and sheet metal repair due to careless movers. Cable on motor was hit by forklift fork when machine was being moved. Machine was running perfect when disconnected. Used in making very small parts. Holding very tight tolerences no problem. Titanuim and plastic. Books included. Second is a Matsuura RA-2. Yasnac MX-3 control. 3 axis. Year is 1990. Comes with Pallet changer and Pallets. Needs a gear for the pallet changer to work. Very simple to change. Goes right on the front of the changer arm. no crawling in machine or difficult to get to place. Machine was running perfect when disconnected( except for pallet changer because of the small gear) Also in company ... morerunning small parts holding very tight tolerences. Books included. Third is an Okuma MC-4va. OSG 5000-M-G control. Year is 1985. 4 axis(including indexer) Machine was running perfect when disconnected. But cover was hit with fork when being moved. shown in Pictures) However this machine needs amplifer boards repaired. Has it's own transformer with adjustable taps. Books included. This machine also was used in company making small parts with very tight tolerences. These machines were not run hard taking deep cuts. They made very. Very light cuts in Titanium and plastic. They are dirty and have surface rust on the covers and splash guards from sitting in storage so long(also why amplifier cards on Okuma need repair) But with cleaning and repairs being made, these would be very nice machines. Also, would guess parameters need to be reinstalled in controller since machines have been sitting for so long. The indexer alone is worth over half the sale price of these machines. Any questions. Feel free to ask. We will help all we can. Machines sold AS IS! Buyer is responsible for all shipping arrangements and cost. Nothing shipped until payed for and checks have
|
|
|
Command TG100 BT30 Holder- RoboDrill Haas CNC lathe, Mazak, Mori-seki, Okuma
Command TG-100 BT30 Holder for Robodrill. I have a bunch of other BT30 stuff listed- see last pic! Don't miss out on my.99 starting- NO RESERVE AUCTION! Terms of sale- Auction must be paid for within 10 days of end. I will accept paypal up to $500- after that you can put it on Visa. MC or Discover thru our merchant services account. Postal MO or Walmart MO or personal check accepted. Personal checks will be held 10 prior to shipment.
|
|
|
2006 OKUMA MULTUS-B-300C CNC Lathe, Live Tooling, Tailstock and more
HTML Online Editor Sample 7918 E McClain Drive Suite 101 Scottsdale AZ 85260 Tel: 480-212-0775 Fax: 480-922-1675 One(1) 2006 OKUMA MULTUS-B-300C LATHES. CNC Control: P200L General Specifications: Turning Diameter: 17.72" Capacities: Chuck Size: 10" Standard Bar Capacity: 2.77" Between Centers: 35.43" Spindle: Maximum Speed: 3.800 RPM, Turret: Number of Tools: 40 Position ATC, Miscellaneous: Weight: 22.400 Lbs. Dimensions: 148" L x 81" W x 99" H, Volts/Phase: 220V, Options: Control, P200L, with 40GB Hard Drive, 3D Color Animation, Programmable Tailstock, Chip Conveyor, Live Tooling, with Swivel Head, Ethernet, Tool Presetter, Big Bore(30 HP) Spindle Option, Integral Direct Drive) B-Axis, Slant Cutting, Mac-man Utilization Monitor, 15 HP Tilting/Swivel Live Tool Head/Spindle, H1 Turret) Remote Jog Handle/Wheel, ... moreTouchsetter-M Tool Eye, Automatic Tool Presetter Arm) Auto Tool Changer(40 Stations) X-Y Plane Conversion, Oil Cooler for Both Spindles, CAPTO-C6 Tool Holding System, C Axis(Spindle Indexing Pos. Rotation) 0.001 Deg. Full Cont. B Axis(Tilting Live Milling Head) 225 Deg. Adjust. Angle, Tilting Live Milling Spindle Positions, 0.001 Deg. Index/Rot. Tilting Live Milling Spindle Speeds, 50-6000 RPM, Can be inspected under power in WI warehouse location. We can provide shipping quotes upon your request. Contact Tom at 480-212-0775 with any questions. Etc.
|
|
|
Okuma & Howa Millac 415V CNC Vertical Machining Center
Okuma& Howa Millac 415V CNC Vertical Machining Center Year 1996 Onyx Fanuc CNC controller X-axis travel 560 mm(22" Y-axis travel 490 mm(16.14" Z-axis travel 490 mm(16.14" T-slotted work table size 700 x 400 mm(27.56" x 15.75" Max table weight capacity 350 kg(771 lbs) Spindle drive motor 7.5 Kw(10 hp) Spindle speed range 120-8000 rpm(16) ATC automatic tool changer ATC tool holder shank MAS403-BT40 Pull stud MAS407 P40T-1 Tool selection electronic random access Max diameter of tool(with adjacent tool) 90 mm(3.54" Max diameter of tool(without adjacent tool) 115 mm(4.53" Max length of tool 250 mm(9.84" Max weight of tool 5 Kg(11 lbs) Time needed for tool change(tool to tool) 1.8 seconds 200 volt three phase. 18 KVA, 52 amps Spindle bore taper NST 40 Hand held operator pendant controller Flood coolant ... moresystem Central lubrication system Rear chip separator Fully enclosed work area with front sliding access door Includes machine manuals PLEASE CONTACT US ABOUT RIGGING SERVICES BEFORE BIDDING Terms and Conditions: All bidders are responsible to determine the age. Description, condition, and authenticity of all Purchased items. This machine has not been tested under power by any of our employees or our company affiliates. Each item is auctioned“AS IS, WHERE IS, with all faults” in its condition at the time of sale, without any warranties or guarantees, either expressed or implied, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, POSSESSION, QUIET ENJOYMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, and without recourse by way of refund, reduction of the Purchase Price, or otherwise. Taxes are applicable to all purchases unless an exempt form or re-sale certificate is emailed/faxed to us. Shipping and Handling: Bidders are responsible for all Shipping and Handling charges. Delicate and expensive equipment requires special handling to ensure its safe delivery. Seller and Buyer have the option to allow the Buyer to choose it's own rigging company for item removal. B
|
|
|
Okuma & Howa Millac 5VA CNC Vertical Machining Center with Fanuc 15M Control
Okuma& Howa Millac 5VA CNC Vertical Machining Center(Msg me for Offers) Fanuc 15-M CNC controller X-axis travel: 1050 mm(41.3" Y-axis travel: 560 mm(22" Z-axis travel: 560 mm(22" T-slotted work table size 1600 x 600 mm(63" x 23.6" Max table load capacity 1500 Kg(3300 lbs) Height of spindle nose end from table top 150 to 710 mm(5.9" to 27.9" Distance from front face of column to center of spindle 600 mm(23.6" Spindle drive motor 11/15 kw Spindle speed range 30-4000 rpm Spindle speed selection 2 steps(24) ATC automatic tool changer Tool holder shank BT50 Pull stud MAS407 P50T-II Tool selection electronic random access PLEASE CONTACT US ABOUT RIGGING SERVICES BEFORE BIDDING Terms and Conditions: All bidders are responsible to determine the age. Description, condition, and authenticity of all Purchased ... moreitems. This machine has not been tested under power by any of our employees or our company affiliates. Each item is auctioned“AS IS, WHERE IS, with all faults” in its condition at the time of sale, without any warranties or guarantees, either expressed or implied, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, POSSESSION, QUIET ENJOYMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, and without recourse by way of refund, reduction of the Purchase Price, or otherwise. Taxes are applicable to all purchases unless an exempt form or re-sale certificate is emailed/faxed to us. Shipping and Handling: Bidders are responsible for all Shipping and Handling charges. Delicate and expensive equipment requires special handling to ensure its safe delivery. Seller and Buyer have the option to allow the Buyer to choose it's own rigging company for item removal. But Seller has final say to selecting rigging personnel for the item removal. Please send us a message with your zip code to get an estimate quote for transport! If you have your own method of transport. Let us know before payment! We Ship Worldwide! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60
|
|
|
OKUMA CADET MATE electrical Drawings CNC 1996 VMC
Here is a electrical drawings manual for a OKUMA Cadet mate CNC machine. Please see pictures for detAils and conditions. Ships to USA ONlY. Posted with
|
|
|
OKUMA operation Manual CNC 1988 OSP500-G, OSP5000M-G
Here is a OKUMA operation manual from 1988. Please see pictures for condition, details and application. Ships to USA ONLY. Posted with
|
|
|
Okuma Cadet CNC Vertical Machining Center W/ Pallet Shuttle
1997 Okuma Cadet Vertical Machining Center Specification Description Travels, 40" X 20" X 20" Spindle Speeds, 40- 8000 RPM, Spindle Taper, CT40, Spindle Motor, 15 HP, Tool Magazine, 20 positions, Weight, 8800 LBS, Dimensions, 110" X 79" X 118" Equipped With: OSP 5020 control. Midaco 40A Pallet Changer Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. A;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1456b8bf1b5-0x106-
|
|
|
Okuma Impact 5-Axis Twin-Turret “BIG-BORE” CNC Turning Center W/Live Milling
Item#3474 Okuma Impact 5-Axis Twin-Turret“BIG-BORE” CNC Turning Center W/Live Milling Equipped With: OSP-7000L CNC Control w/CRT 10" 3-Jaw Chuck 5-Axis Machine Design 12-Position Upper Turret 10-Position Lower Turret Tailstock Chip Conveyor Coolant System Machine Specifications: Spindle Bore Diameter. 3.94" Swing Over Bed. Maximum. 25.5" Swing Over Carriage. 16.50" Swing Over Cross Slide. 12.9" Distance Between Centers. Maximum. 25.5" X-Axis Travel. Upper Turret. 11.81" X-Axis Travel. Lower Turret. 7.6" Z-Axis Travel. Upper Turret. 28.54" Z-Axis Travel. Lower Turret. 25.9" Spindle Speeds Range. to 3500 RPM Shipping Point: OH Price: $42.500.00 SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655 g6.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14594cbd43f-0x114-
|
|
|
Okuma Macturn 250W 5-Axis CNC Turning Center (2 available)
Okuma Macturn 250W 5-Axis CNC Turning Center Stock Number 1634014, Model 250W, Age 2003, Swing Over 20.87" Max Machining Diameter 21.65" Max. Turning Diameter- Upper 21.65" Max. Turning Diameter- Lower 9.06" Length Between Spindle Noses 56.69" X-Axis Travel- Upper 18.7" Y-Axis Travel- Lower 6.3" Z-Axis Travel- Upper 46.06" Z-Axis Travel- Lower 45.47" Y-Axis Travel 6.3" Z-Axis Travel 39.37" C-Axis Rotation 0.001 DEG, Main Spindle Nose A2-8, Main Spindle Bore 2.44" Main Spindle Speeds 5000 RPM, Main Spindle Motor 30HP/ 20HP, Main Spindle Indexing 0.001 DEG, Sub-Spindle Nose A2-6, Sub-Spindle Speeds 6000 RPM, Sub-Spindle Motor 15 HP/ 10 HP, Sub-Spindle Indexing 0.001 Deg, Number of Tools 90 ATC, Tool Taper HSK63, 2) Units Available Under-power, OPS E100 CNC Control. ADMAC Off-Line Software, ... more10" Kitigawa Chuck 3-Jaw Chuck, Main Spindle, 8" Kitagawa 3-Jaw Chuck, Sub-Spindle, Lower Turret w/ 2 Thur Coolant VDI Rotary Tool Holders, Automatic Touch Setter, OGL 30 Gantry Loading System, Auto Door w/ Dual Cycle, Chip Blaster High Pressure Coolant through System, All Manuals, leveling pads& schematics. PAYMENT We accept Paypal. Wire Transfer, Check(must wait until clears to pick up) and Cash. We also accept credit cards direct(Visa, Mastercard, American Express, Discover) with a 3% service charge. Payment must be made in full within 4 days of a winning bid. CONTACT US You may contact us 9 AM- 5 PM Eastern Time weekdays at 419-536-4445. You can also use eBay's messaging feature. After hours. Contact Alex at 419-350-2986. If you purchase a"Local Pickup Only" item, please contact us as soon as possible for pickup or shipping instructions. SHIPPING If a shipping price is listed. We will ship within 2 business days after payment clears. The majority of our items are marked as"Local Pickup Only" This means that you are responsible for making freight arrangements, including palletizing, disassembly, rigging, loading, and transport. Fo
|
|
|
OKUMA & HOWA ACT3 CNC LATHE 28''
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 02140900012 Manufacturer: OKUMA& HOWA Description: OKUMA& HOWA ACT3 CNC LATHE 28' Capacity: 28' Model Number: ACT3 Serial Number: 09154 Additional Information: 10 POSITION TOOL CHANGER. 10' 3 JAW CHUCK, FANUC 6T CONTROL BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email dir
|
|
|
1995 Okuma Cadet CNC Lathe WITH BAR FEEDER AND CHIP CONVEYOR LCN8 BIG BORE
DESCRIPTION Okuma Cadet CNC Lathe Manufacturer: Okuma Model: LCN8 Year: 1995 Condition: Used Specifications: Model Number LCN8 Controls OSP5020L Swing Over saddle 15.75" Max Turning Diameter 8.0"9.84" Max Turning Length 19.68 Spindle Speed 65-3.000 Spindle Bore 3.54" Spindle Nose A2-8 Turret Positions Upper 12 Turret Positions Lower 8 Weight 9.700 Bar Capacity 2 1/2" Chuck SMW Quick Change Chuck Equipped With: Bar Feeder LNS Quickload W/Manual Chip Conveyor Tailstock For more information contact MIKE CALLAHAN at(816) 210-5135 Terms and Conditions SALES TERMS: All products are purchased under an as-is condition with no warranties or guarantees of any kind. PAYMENT INFORMATION: PAYPAL. Certified Checks, and cash in person. All items must be paid in full before they are shipped. SHIPPING INFORMATION: RBI ESS ships worldwide ... moreand uses all common carriers including USPS. DHL, FEDEX, UPS and truck freight. When requested RBI ESS will combine multiple orders to reduce shipping costs, if possible. RETURN POLICY: THIS MACHINE IS BEING SOLD AS IN PLEASE SEE DECRIPTION AND PLEAS ASK QUESTION BEFORE BIDDING THANK YOU
|
|
|
STEVENS ENGINEERING SUB-PLATE 48" x 21" STND PATTERN. FITS OKUMA CNC VMC. 4020
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Stevens Engineering Sub-Plate Model: 480200-1 Description: In excellent condition. Came off a 2002 Okuma ESV-4020. Will fit Okuma Cadet 4020. ES4020, Crown V4018 according to Stevens Eng website. Includes all bolts& T-nuts. This table retails new@ $4,000. Stevens Subplates set the industry standard for accuracy& versatility. Save 15-minutes to 2-hours on every fixtures set-up. Subplates pay for themselves in 20-50 setups. Jig bored bushed holes and threaded holes form the basic Stevens pattern for mounting modular accessories. Subplate is permanentely aligned to machine axes and becomes an accurate reference for machine set-ups. Accuracy of grid eliminates the need for indicating of probing. Stevens Subplates are precision ground to a parralelism of.0005" per 40" ... moreCounterbored clearance holes to fit the t-slot of threaded hole pattern on any make and model of milling machine are included. STANDARD PATTERN consists of 1/2-13 tapped holes on 1.250 centers and.501 1-5012 I.D. bushings on 5.000 centers. It is the most widely used pattern and may be used for mounting any Stevens accessory. Table size: 48.25"L x 21.25"W x 1.4" Thick Check out our feedback& bid with confidence! The above information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight costs. Email us with any technical questions you may have or email with zip for a freight quote. CA residents subject to sales tax. Freight and removal are the responsibility of the buyer. Local Pick-up ok. We will help load small items at no charge Feel free to contact us TOLL FREE@ 888-440-4460 or Email Us( We are conveniently located@ 2430 Cypress Wy. Fullerton. CA 92831 Hours: M-F 7:30AM- 4:30PM Saturday by appointment only GENERAL TERMS: By Purchasing equipment from Rohner Machinery Sales. Inc. the buyer agrees to all the terms and
|
|
|
Okuma MC-V3016 CNC Vertical Machining Center (#24112)
Reference#24112 Okuma MC-V3016 CNC Vertical Machining Center Capacity: X-Axis Travel. 30" Y-Axis Travel. 16.1" Z-Axis Travel. 17.7" Table Size. 20" X 39.4" Table Load Capacity. 1500 Lbs. Distance. Table to Spindle. 6.3"24" Spindle Speeds. 50-8000 RPM Spindle Taper. CAT 40 Spindle Motor. 15 HP/ 10 HP Tool Changer. 20 ATC Max. Tool Dia. with Adjacent Tools. 3.54" Max. Tool Dia. w/out Adjacent Tools. 4.92" Max. Tool Length. 15.75" Max. Tool Weight. 17.6 lbs Machine Dimensions. 89" x 107" 104" Machine Weight. 14.300 lbs EQUIPPED WITH: OSP-7000M 3-Axis CNC Control 20-Position Automatic Tool Changer Chip Conveyor*Contact for Machine Location
|
|
|
OKUMA MCR-24 5-Face CNC Double Column Machining Center (#24312)
Reference#24312 OKUMA MCR-24 5-Face CNC Double Column Machining Center Model: MCR-24 Age: 1981 Retrofit With New Controls In 2008 FEATURES: GE Fanuc 21i-M Control Retrofit in 2008 50 Station Automatic Tool Changer Right Angle Head CAPACITY: X-Axis Table Travel. 165.35" Y-Axis Head Travel. 98.43" Z-Axis Vertical Ram Travel. 25.59" W-Axis Cross Rail Vertical Travel. 27.56" Width Between Columns. 96" Table Size. 80" x 180" Table Load Capacity. 35.200 Lbs. Spindle Speeds. Variable. 10-6000 RPM Spindle Taper. BT 50 Spindle Drive Motor. 35 HP/ 30 HP Approximate Overall Height. 238" Approximate Floor Space. 265" x 402" Approximate Weight. 86.000 Lbs. EQUIPPED WITH: GE Fanuc 21i-M Control retrofit in 2008 Fanuc Red Cap Motors. Ballscrews, Servos 50-Position Automatic Tool Changer 90 Degree Right Angle ... moreHead. Manual Sliding Steel Way Covers on Bedways Chip Conveyor NOTE: Large Assortment of 50 Taper Tooling Available With Machine At Additional Cost. Contact for Machine Location
|
|
|
OKUMA GI-20N CNC INTERNAL GRINDER B30736
Inventory# 30736. OKUMA GI-20N CNC INTERNAL GRINDER Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Swing over Table: 19.69" Maximum Work Length: 7.87" Wheel Infeed Slide(X-Axis)Travel: 7.98" X-Axis Feed Rates: 0008-4 IPM X-Axis Rapid Rate: 472.44 IPM Table(Z-Axis)Travel: 19.69" Z-Axis Feed Rate: 236.22 IPM Z-Axis Positioning Rate: 472.44 IPM Workhead Spindle Bore: 2.76" Workhead Spindle Nose Diameter: 3.94" Workhead Spindle Speeds: 100-750 RPM Workhead Angle of Swivel: 10 Degrees EQUIPPED WITH: Okuma OSP 5020L CNC Control 10" Microcentric 3 Jaw Chuck Coolant System Misc Spare Chucks and etc. Approximate Overall Dimensions: 100" L-R x 96" F-B x 80" HApproximate Weight: 12000 Lbs Serial Number: 0405-0289 Year(New 1991) Preliminary Specifications Subject ... moreto Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 Terms of Sale: Payment All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Fees Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. Machinery and Equipment Some machinery and equipment is located at Fortune 100 Manufacturing Facilities. Most of the machinery and equipment located at these Facilities is disconnected and cannot be seen under power. Unless specifically listed in writing by PMS. All machinery and equipment uses 3 Phase power. All machine sales are subject to machine a
|
|
|
OKUMA CNC LATHE CHILLER HEAT EXCHANGER COOLER FOR CONTROL PANEL
THIS AUCTION IS FOR A USED OKUMA CNC LATHE CONTROL CABINET CHILLER COOLER HEAT EXCHANGER. I THINK THIS CAME OFF OKUMA LB15 CNC LATHE. $$$$ PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS.$$$$ I WILL LOAD ON YOUR TRUCK OR TRAILER FOR NO CHARGE. ANY CRATING THERE WILL BE EXTRA CHARGES. PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. FOR SHIPPING QUOTE PLEASE SEND A COMPLETE ADDRESS! IF ITEM IS BEING SHIPPED TO A BUSINESS OR RESIDENTIAL? WITH DOCK OR FORKLIFT? OR IF YOU WANT TO PICK UP AT FREIGHT TERMINAL. PLEASE CHECK OUT MY AUCTIONS. YOU BUY AS IS. I WILL COMBINE AUCTIONS TO SAVE ON SHIPPING. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Okuma LC-20-M Simulturn CNC Lathe Turning Center
1986 Okuma LC-20M Simulturn Specification Description Swing Over Bed, 15.74" Max Turning Diameter, 11.81" Max Turning Length, 29.52" Spindle Speeds, 65-3500 RPM, Spindle Bore, 2.04" Turret positions, 8 + 8 Twin Turret, Tailstock Quill Stroke, 5.9" Weight, 14.300 LBS, Equipped With: OSP 5000L-G. SMW Bar Feeder, Milling Heads, 3-Jaw, Collet Nose, Chip Conveyor If you have any question. Please contact sales at 253-830-4722 or email CapitalEquipmentInc@hotmail.com Shipping: Buyer is responsible for freight arrangements and costs All freight costs will be paid by the purchaser prior to pickup Large freight items usually ship within 5 days after all sales are final If needed. There will be a $125 loading fee for large freight items Small items are shipped via UPS. FedEx or USPS, Monday- Friday and will ship within 48 hours ... moreafter funds have been approved. If you have any questions. Please contact me g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-1487699f621-0x10b-
|
|
|
OKUMA LB9 CNC LATHE WITH A SUB SPINDLE AND A BAR FEEDER
The 1994 Okuma LB 9 CNC Lathe is in good condition. The machine is equipped with OSP 500L-G CNC Control. A 5,000 RPM 6.75" main spindle, a 5,000 RPM 4" sub spindle, and an Omnibar barfeeder. Please view for more specifications. Please call(786) 440-5405 for more information or to see the machine.
|
|
|
cnc axis brake , Mori Seiki,doosan,okuma
Electro mechanical brake Removed from running machine and tested ok Approx 1"25.4mm) through hole with compression couplings
|
|
|
OKUMA CNC LATHE LB12, 8" chuck, Tailstock, Good Condition - See Video - Michigan
Okuma LB12 CNC Lathe MACHINE IS UNDER POWER IN OUR LIVONIA MI FACILTY(DETROIT AREA) QUESTIONS CALL 734-655-0490 CNC Control. OSP 500LG Swing over Bed. 13.78" Max. Turning x Diameter. 7.87" x 15.91" Travels: Z Axis. 14.57" X Axis. 5.7" Spindle Nose. A2-6 Hole Through Spindle. 2.2" Spindle Speed. 65-3500 RPM EQUIPPED WITH: OSP 500LG CNC Control 8 POSITION TURRET TAILSTOCK APPROX. WEIGHT: 7.040 LBS APPROX. FLOOR SPACE: 91" X 62"
|
|
|
Okuma MB-56VB CNC Vertical Machining Center 50 Taper 4th axis
2008 Okuma MB-56VB Vertical Machining Center X-Travel.41.34" T-Travel.22.05" Z-Travel.18.11" Table Dimensions.51.18" x 22.05" Rapid Traverse(X& Y)1575 IPM(Z)1260 IPM Spindle Speed.6000 RPM Taper.CT-50 Motor(10min/cont)15/10) Weight.17000 lbs Equipped With: High column 200mm. OSP P200M THiNC control, Tsudakoma RNA-250R,D rotary table, Morse taper tailstock(TL-160M) Super nurbs software, Tool breakage detection
|
|
|
Okuma MC-V4020 CNC Vertical Machining Center w/4th Axis rotary table 50 Taper
2005 Okuma MC-V4020 Specs Table Size.48.37" x 20" Max Table Load.1500 LBS X Travel. 40" Y Travel.20" Z Travel.17.72" Rapid Traverse. X&Y Axis)1417 IPM(Z Axis)1181 IPM Taper.CT-50 Spindle Speed.40- 6000 RPM Spindle Motor.20 HP ATC.32 Tools Weight.16.000 lbs Equipped With: OSP-E100M Control. 4th Axis Rotary Table, Z Axis Riser, If you have any question. Please contact sales at 253-830-4722 or email Brayton@capitalequipmentinc.com Payment: Machine will be paid in full before shipment Preferred method of payment certified check or wire transfer There will be a 3% charge for payment through PayPal Shipping: Buyer is responsible for freight; arrangements and costs All freight costs will be paid by the purchaser prior to pickup Large freight items usually ship within 5 days after all sales are final Small items are shipped ... morevia UPS. FedEx or USPS, Monday- Friday and will ship within 48 hours after funds have been approved. If you have any questions. Please contact me
|
|
|
1994 OKUMA LB-9 CNC LATHE WITH A SUB SPINDLE, BAR FEEDER, AND TOOLING
The 1994 Okuma LB-9 CNC Lathe is in good condition. It is equipped with OSP-500L CNC Control. A 6.75" chuck on the main spindle, 4" chuck sub spindle, Omnibar bar feeder, parts catcher, chip conveyor, approximately 15 collets. And tool holders. Please view: for more specifications. Please call(786) 440-5405 for more information or to see the machine working under power. The machine can be loaded onto a truck for free.
|
|
|
OKUMA ES-L8 CNC TURNING CENTER LATHE, YEAR 2000
OKUMA ES-L8 CNC TURNING CENTER LATHE. 2000 MODEL: ES-L8 YEAR: 2000 S/N: C0345 Max Swing Over Slant Bed. 17.7" Max Swing Over Carriage. 10.63" Max Distance Between Centers. 19.68" Cross Travel(X-Axis) 6.10" Longitudinal Travel(Z-Axis) 20.47" Feed Range(Infinitely Variable) 1 to 200 IPM Rapid Traverse Rate. 591 IPM Number of Turrets. 1 Turret Positions. 8 Spindle Bore. 2.44" Bar Capacity. 2" Spindle Speed Range. 100-3000 RPM Spindle Drive Motor. 10 HP Electrics. 220/3/60 Approximate Machine Dimension. 89" x 75" Approximate Machine Height. 80" Approximate Machine Weight. 6000 LBS EQUIPPED WITH: OSP U10L CNC CONTROL* ONE-TOUCH IGF PACKAGE* L MACMAN PACKAGE SYSTEM PACKAGE LNC PACKAGE 160M TAPE STORAGE 5C COLLET CHUCK PROGRAMMABLE TAILSTOCK RS232C DATA COMMUNICATION PORT 3.5" FLOPPY DISK DRIVE ... moreMANUALS(ELECTRICAL DWG/OPERATION-MAINTENANCE PDF/PARTS BOOK) Specifications and Condition are correct to the best of our knowledge and are subject to your verification and correction. PLEASE CONTACT US FOR ACTUAL MACHINE LOCATION. ADDITIONAL LOADING& TRANSPORTATION COSTS*
|
|
|
2012 ! OKUMA GENOS L400E TURNING CENTER CNC LATHE
2012 OKUMA GENOS L400E TURNING CENTER CNC LATHE Item Description LOW HOURS! ONE MAN SHOP. Specification Description MAXIMUM TURNING LENGTH: 43.31" MAXIMUM TURNING DIAMETER: 12.99" MAXIMIM SWING OVER BED: 20.47" CHUCK SIZE: 10" SPINDLE SPEEDS: 3000 RPM SPINDLE BORE DIAMETER: 3.15" SPINDLE MOTOR: 20/15 HP SPINDLE NOSE: A2-8 X-AXIS RAPID TRAVERSE RATE: 787 IPM Y-AXIS RAPID TRAVERSE RATE: 787 IPM MADE IN: JAPAN Equipped With: CONTROL: OSP P200L. CHIP CONVEYOR, TAILSTOCK, TOOL PRE-SETTER, HIGH PRESSURE COOLANT(100 PSI) Refund Policy We offer a 5 day DOA exchange policy(All shipping/handling cost are the buyer's responsibility) DOA item must be returned for RMA inspection, If exchange is not possible. A refund will be issued less shipping/handling Operating hours Monday-Friday 9:00am- 5:00pm( EST) Eastern Standard Time ... moreWe can be reached at 905-635-7530 ext.21 or cel# 905-630-5911 Payment Terms International buyers must pay buy wire transfer. For Canadian& US buyers. We accept Paypal up to $500.00 US Max. Auctions over US$500.00 must pay by wire transfer within 48 business hours from auction close. Payment must be received by our bank within 72 business hours after auction closes. If payment terms are not met. Item will be relisted or offered to the under bidder without further notice. An Unpaid Item Dispute WILL be filed for ALL unpaid items after 7 days as allowed by eBay and are subject to relisting Ontario Residents please add 13%HST. Customs brokerage fees and duty charges may apply. Shipping Info Canadian and US Buyer s to prepay actual shipping costs. Loading. Skidding, Crating or Special Packaging Fee may apply to the item being auctioned if required. Charges will be determined according to the size and sensitivity of the item. Item will be shipped 3-5 business days after payment has been secured. Insurance is offered at an additional cost and must be requested by the buyer in advance to shipping. Paypal payments will be shipped to confirmed addresses ONLY! All winner notificatio
|
|
|
Okuma LB-15ii-MW CNC Turning Center Live Tooling & Sub Spindle
Okuma LB-15ii-MW CNC Turning Center Specs: Max Swing Over Bed.20.87" Swing Over Cross Slide.13.38" Distance Between Spindles.29.92" Cross Travel(X-Axis)10.23" Longitude Travel(Z-Axis)20.47" W-Axis Travel.20.47" C-Axis.001) Cutting Feed Rate.39 IPR Rapid Traverse Rate X-Axis.591 IPM Z-Axis.787 IPM Turret Positions.12 Spindle Nose.A2-6 Hole Thru Spindle.2.44" Tooling.VDI Spindle Speed.45-4500 RPM Spindle Motor.20/15 HP Sub Spindle Speed.45-4500 RPM Sub Spindle Motor.7.5/5 HP Live Tooling Speed.38-3800 RPM Live Tooling Motor.4.9 HP Equipped With: OSP-7000L control. Tooling, Chip conveyor, Parts catcher If you have any question. Please contact sales at 253-830-4722 or email Brayton@capitalequipmentinc.com Payment: Preferred method of payment certified check or wire transfer There will be a 3% charge for payment ... morethrough PayPal Shipping: Buyer is responsible for freight; arrangements and costs All freight costs will be paid by the purchaser prior to pickup Large freight items usually ship within 5 days after all sales are final Small items are shipped via UPS. FedEx or USPS, Monday- Friday and will ship within 48 hours after funds have been approved. If you have any
|
|
|
OKUMA Crown L1060 CNC Lathe Control: OSP U10L
OKUMA CROWN CNC Lathe Model: L1060 CNC Control: OSP U10L X-axis Travel: 7.28" Z-axis Travel: 20.47" No. of Tools: 12 Spindle Nose Type: JIS A2-6 Max RPM: 4200 Turning Diameter: 10.63" Swing: 21.65" Machining Length: 10.68" Dimensions: 98" x 71" x 67" Machine Weight: 10000 lbs. Machine is ready to be inspected. It is equipped with tooling. And manuals. Machine is in excellent condition. It is running and very nice clean machine. It has been very well maintained.
|
|
|
OKUMA LT-300M TWIN STAR CNC LATHE B33610
Inventory# 33610. OKUMA LT-300M TWIN STAR CNC LATHE B33610. Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Maximum Swing: 21.65" Turning Diameter: 13.78" Distance Between Noses: 47.24" Bar Capacity Right and Left Spindles: 2" Upper Turret Positions: 12 Lower Turret Positions: 12 Spindle Speeds for Main& Sub: 380- 5000 RPM EQUIPPED WITH: Okuma OSP-E100L CNC Control Live Milling Twin Kitagawa B-210 Chucks Twin Turret Coolant System Mist Buster Chip Conveyor Serial Number: 111845 Year(New 2004) Preliminary Specifications Subject to Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 Terms of Sale: Payment All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Fees Prices do not include ... moreany federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. Machinery and Equipment Some machinery and equipment is located at Fortune 100 Manufacturing Facilities. Most of the machinery and equipment located at these Facilities is disconnected and cannot be seen under power. Unless specifically listed in writing by PMS. All machinery and equipment uses 3 Phase power. All machine sales are subject to machine availabilty. Loading/Freight Charges All rigging. Insurance and freight charges are the responsibility of the Purchaser unless agreed by PMS and Purchaser in writing. A qualified rigger with a minimum of $2,000,000 liability insurance must perform all remov
|
|
|
Okuma MC-4VA CNC Vertical Machining Center with OSP 5000M Control
WORK HORSE! Used machine- fully operational except 4th Axis needs repair(est about $1000 to fix) holds tolerances well. Purchased new Dec. 1985- original owner. Well maintained. NOTE: THE ABOVE PICTURES ARE NOT THE ACTUAL MACHINE YOU WILL BE BIDDING ON- THEY ARE REPRESENTATIVE OF WHAT THE ACTUAL MACHINE LOOKS LIKE. The machine pictured is a model MC-4VAE. The machine being sold is a model MC-4VA which is identical in appearance. The machine we are selling is currently in storage and it was just more convenient to take pictures of the machine we have on our floor. All manuals as shown in picture are included. SPECS: CNC Control: Okuma OSP5000M. TRAVELS: X-Axis(table) 25.59" 650mm) Y-Axis(saddle) 16.14" 410mm) Z-Axis(spindlehead) 17.72" 450mm) Spindle center to table top- 7.8"25.59" 200-650mm) Spindle center to column ... moreface- 18.11" 460mm) TABLE: Table size- 39.37" x 20.08" Effective Size- 39.37" x 16.14" Load Capacity- 1100 lbs. Table surface to floor level- 29.53" SPINDLE: Tapered bore- NT No 40. Spindle dia. at front bearing- 2.76" dia. Spindle speed range- 50- 4000 rpm. Number of spindle speeds- Infinitely variable. FEEDRATE: Rapid traverse rate- 591 IPM(Z: 512 IPM) Cutting feedrate(X-Y-Z-axis) 01 to 160 IPM. MOTOR: Main spindle drive motor- VAC 10/7.5 HP(30 min/cont. Hydraulic Pump Motor- AC 3 HP. X-axis servomotor- Brushless. 1.6 HP. Y-axis servomotor- Brushless. 1.6 HP. Z-axis servomotor- Brushless. 1.6 HP. ATC: Tool magazine capacity- 20 tools. Tool selection- Memory random. Tool shank type- Caterpillar Std No. 40 Pull stud- MAS type 2. Max. tool dia. with adjacent tools- 4.02" dia. Max. tool length/weight- 11.81"17.6 lbs. POWER REQUIREMENTS: Electrical: 220/440 volts. 3 phase, 60 Hz with a load capacity of 26KVA. A ground rod must be provided for the machine with a reading of 5 Ohms or less. Air: 70-100 PSI and a volume of 5 C.F.M. OTHER: Machine height- 107" Floor space required- 95" x 110" Machine weight- about 13.250 lbs.
|
|
 |