|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Condition: New Location: BLACKPOOL, United Kingdom ■ High-performance, EEPROM-based programmable logic devices (PLDs) based on second-generation MAX® architecture ■ 5.0-V in-system programmability (ISP) ... morethrough the built-in IEEE Std.
Buy It Now
Condition: New Location: United Kingdom [Connection] This IDC 2x10 double row 20pin rectangular connector, pitch 2.0mm/2.54mm is very suitable for JTAG connector cables, PCB electronic projects ... moreand integrated circuits, providing reliable connection. [Material] Made of plastic and metal materials to ensure durability and corrosion resistance for long-lasting performance. [Control signal transmission] Can be used to transmit control signal and weak current, suitable for PCB electronic projects. [Easy to install] This IDC 2x10 double-row 20pin connector can be installed at right angles for easy operation. [Convenient packaging] 20pcs connectors are packed in a plastic storage box, which is convenient to organize and carry, keeping the connectors neat and organized. Connector T.
Buy It Now
Condition: New Location: NORTHAMPTON, United Kingdom This lot is a collection of 3 genuine Altera EPF10K50EQC240-2 Embedded Programmable Logic Device. 30,000 to 200,000 typical gates (see Tables 1 and 2). ... moreEmbedded programmable logic devices (PLDs), providing system-on-a-programmable-chip (SOPC) integration in a single device.
Buy It Now
Condition: New Location: HIGH WYCOMBE, United Kingdom Industry's first ARM cortex-M3 based family of ZigBee modules. 32.768KHz watch crystal can be added externally. 192KB flash and 12Kbytes of RAM.
Buy It Now
Condition: New Location: GRIMSBY, United Kingdom
Buy It Now
Condition: New Location: BLACKPOOL, United Kingdom ALTERA EPM7064TC44-7 IC CPLD MAX 7000S Family 1.25K Gates 64 Macro 100 PIN. ■ High-performance, EEPROM-based programmable logic devices (PLDs) based on ... moresecond-generation MAX® architecture ■ 5.0-V in-system programmability (ISP) through the built-in IEEE Std.
Buy It Now
Condition: New Location: BLACKPOOL, United Kingdom ALTERA MAX EPM7064TC44-7 IC CPLD MAX 7000S Family 1.25K Gates 64 Macro 100 PIN. ■ High-performance, EEPROM-based programmable logic devices (PLDs) based ... moreon second-generation MAX® architecture ■ 5.0-V in-system programmability (ISP) through the built-in IEEE Std.
Buy It Now
Condition: Used Location: ACCRINGTON, United Kingdom
Buy It Now
Condition: Used Location: CHELMSFORD, United Kingdom • Freescale i.MX53 1 GHz ARM® Cortex™-A8 processor. • Freescale MC1323X 2.4 GHz IEEE® 802.15.4/ZigBee®. • Freescale SGTL5000 audio codec. • Freescale ... moreMAG3110 magnetic sensor. SABRE stands for: Smart Application Blueprint for Rapid Engineering.
Buy It Now
Condition: New Location: BLACKPOOL, United Kingdom ALTERA MAX EPM7064STC100-10 IC CPLD MAX 7000S Family 1.25K Gates 64 Macro 100 PIN. ■ High-performance, EEPROM-based programmable logic devices (PLDs) ... morebased on second-generation MAX® architecture ■ 5.0-V in-system programmability (ISP) through the built-in IEEE Std.
Buy It Now
Condition: New Location: BLACKPOOL, United Kingdom XILINX XC9536XL VQ64 10C CPLD IC CHIP. - In-system programmable. - 5 ns pin-to-pin logic delays, with internal system frequency up to 208 MHz. • Four ... morepin-compatible device densities. • Advanced system features.
Buy It Now
Condition: New Location: United Kingdom [Connection] This IDC 2x10 double row 20pin rectangular connector, pitch 2.0mm/2.54mm is very suitable for JTAG connector cables, PCB electronic projects ... moreand integrated circuits, providing reliable connection. [Material] Made of plastic and metal materials to ensure durability and corrosion resistance for long-lasting performance. [Control signal transmission] Can be used to transmit control signal and weak current, suitable for PCB electronic projects. [Easy to install] This IDC 2x10 double-row 20pin connector can be installed at right angles for easy operation. [Convenient packaging] 20pcs connectors are packed in a plastic storage box, which is convenient to organize and carry, keeping the connectors neat and organized. Connector T.
Buy It Now
Condition: New Location: United Kingdom [Connection] This IDC 2x10 double row 20pin rectangular connector, pitch 2.54mm is very suitable for JTAG connector cables, PCB electronic projects and ... moreintegrated circuits, providing reliable connection. [Material] Made of plastic and metal materials to ensure durability and corrosion resistance for long-lasting performance. [Control signal transmission] Can be used to transmit control signal and weak current, suitable for PCB electronic projects. [Easy to install] This IDC 2x10 double-row 20pin connector can be installed at right angles for easy operation. [Convenient packaging] 20pcs connectors are packed in a plastic storage box, which is convenient to organize and carry, keeping the connectors neat and organized. Connector Type ID.
Buy It Now
Condition: New Location: United Kingdom [Connection] This IDC 2x10 double row 20pin rectangular connector, pitch 2.0mm/2.54mm is very suitable for JTAG connector cables, PCB electronic projects ... moreand integrated circuits, providing reliable connection. [Material] Made of plastic and metal materials to ensure durability and corrosion resistance for long-lasting performance. [Control signal transmission] Can be used to transmit control signal and weak current, suitable for PCB electronic projects. [Easy to install] This IDC 2x10 double-row 20pin connector can be installed at right angles for easy operation. [Convenient packaging] 20pcs connectors are packed in a plastic storage box, which is convenient to organize and carry, keeping the connectors neat and organized. Connector T.
Buy It Now
Condition: New Location: United Kingdom [Connection] This IDC 2x10 double row 20pin rectangular connector, pitch 2.54mm is very suitable for JTAG connector cables, PCB electronic projects and ... moreintegrated circuits, providing reliable connection. [Material] Made of plastic and metal materials to ensure durability and corrosion resistance for long-lasting performance. [Control signal transmission] Can be used to transmit control signal and weak current, suitable for PCB electronic projects. [Easy to install] This IDC 2x10 double-row 20pin connector can be installed at right angles for easy operation. [Convenient packaging] 20pcs connectors are packed in a plastic storage box, which is convenient to organize and carry, keeping the connectors neat and organized. Connector Type ID.
Buy It Now
Condition: New Location: United Kingdom [Connection] This IDC 2x10 double row 20pin rectangular connector, pitch 2.0mm/2.54mm is very suitable for JTAG connector cables, PCB electronic projects ... moreand integrated circuits, providing reliable connection. [Material] Made of plastic and metal materials to ensure durability and corrosion resistance for long-lasting performance. [Control signal transmission] Can be used to transmit control signal and weak current, suitable for PCB electronic projects. [Easy to install] This IDC 2x10 double-row 20pin connector can be installed at right angles for easy operation. [Convenient packaging] 20pcs connectors are packed in a plastic storage box, which is convenient to organize and carry, keeping the connectors neat and organized. Connector T.
Buy It Now
Condition: New Location: GRIMSBY, United Kingdom
Buy It Now
Condition: New Location: GRIMSBY, United Kingdom
Buy It Now
Condition: New Location: United Kingdom [Connection] This IDC 2x10 double row 20pin rectangular connector, pitch 2.54mm is very suitable for JTAG connector cables, PCB electronic projects and ... moreintegrated circuits, providing reliable connection. [Material] Made of plastic and metal materials to ensure durability and corrosion resistance for long-lasting performance. [Control signal transmission] Can be used to transmit control signal and weak current, suitable for PCB electronic projects. [Easy to install] This IDC 2x10 double-row 20pin connector can be installed at right angles for easy operation. [Convenient packaging] 20pcs connectors are packed in a plastic storage box, which is convenient to organize and carry, keeping the connectors neat and organized. Connector Type ID.
Buy It Now
Condition: New Location: United Kingdom [Connection] This IDC 2x10 double row 20pin rectangular connector, pitch 2.54mm is very suitable for JTAG connector cables, PCB electronic projects and ... moreintegrated circuits, providing reliable connection. [Material] Made of plastic and metal materials to ensure durability and corrosion resistance for long-lasting performance. [Control signal transmission] Can be used to transmit control signal and weak current, suitable for PCB electronic projects. [Easy to install] This IDC 2x10 double-row 20pin connector can be installed at right angles for easy operation. [Convenient packaging] 20pcs connectors are packed in a plastic storage box, which is convenient to organize and carry, keeping the connectors neat and organized. Connector Type ID.
Buy It Now
Condition: New Location: MANCHESTER, United Kingdom And the target device’s debug interface signals. debug interfaces. Power is provided to the adapter from the USB connection to the PC. The USB Debug Adapter ... moreis. Remove power from the target board and the USB Debug Adapter before connecting or disconnecting the Ribbon cable from the target board.
Buy It Now
Condition: Brand New Location: United Kingdom MCU Case Style: TQFP. Fail-safe clock monitor (FSCM) operation - Detects clock failure and switches to on-chip. During that process you will be issued ... morewith an RMA number. Product Details. Images shown are for demonstration purposes.
Buy It Now
Condition: Brand New Location: United Kingdom MCU Case Style: QFP. During that process you will be issued with an RMA number. MSL: MSL 3 - 168 hours. Fully static operation. Product Details. Images ... moreshown are for demonstration purposes.
Buy It Now
Condition: Brand New Location: United Kingdom MCU Case Style: DIP. During that process you will be issued with an RMA number. CPU Speed: 16MHz. Images shown are for demonstration purposes.
Buy It Now
Condition: Brand New Location: United Kingdom IC, 8BIT 32K FLASH MCU, DIP40. Core Size: 8bit. Digital IC Case Style: DIP. IC Generic Number: 32. CPU Speed: 16MHz. During that process you will be issued ... morewith an RMA number. Images shown are for demonstration purposes.
Buy It Now
Condition: Brand New Location: United Kingdom MCU Case Style: DIP. During that process you will be issued with an RMA number. Fully static operation. Product Details. Images shown are for demonstration ... morepurposes.
Buy It Now
Condition: Brand New Location: United Kingdom MCU Case Style: DIP. Embedded Interface Type: I2C, SPI, UART. 0 to 20MHz at 4.5 to 5.5V Speed Grade. CPU Speed: 20MHz. 0.4mA Active, 0.1µA Power-down ... moremode, 0.6µA Power-save mode (32kHz RTC) power consumption.
Buy It Now
Condition: New Location: MARYPORT, United Kingdom For Use With/Related Products: ARM MCUs.
Buy It Now
Condition: New Location: MARYPORT, United Kingdom
Buy It Now
Condition: Brand New Location: United Kingdom free delivery, express delivery available, excellent feedback, shop with confidence, RPI-HUB-MODULE Ftdi Module. Interface Expansion For Rpi. Product ... moreFeatures. MODULE. INTERFACE EXPANSION FOR RPI, Product Details. Module Applications: Industrial and Telecommunication, Module Interface: USB, Supply Voltage Max: 5V, Supported Devices: FT2232H, Supply Voltage Range: 5V, Product Range information. The information below is for the range this product is part of and may not be information specific to the product. Please contact us if you are unsure of any of the details. Product Range Description. The FT2232H based RPi HUB Module is a USB to UART/245FIFO/SPI/I2C/JTAG/GPIO interface expansion module targeted at connecting to Raspberry-Pi computer to expand the number of interfaces. It can also be used as a hub device or an FT2232H evaluation module. The module has a USB 2.0 Hi-Speed hub chip which supports up to three external downstream USB ports. The FT2232H is a USB 2.0 Hi-Speed(480Mb/s) to UART/MPSSE IC. The device features two interfaces that can be configured for asynchronous or synchronous serial communications or Parallel FIFO Interface. Product Range Features. Standard USB 2.0 Type A plug to connect to the Host, USB Hi-Speed FT2232H device for USB-Serial/Bit bang communications. Entire USB protocol handled by USB module, USB 2.0 Hi-Speed hub controller integrated to support up to 3 downstream USB ports, External power input connector available to supply external downstream USB ports. Support for USB suspend and resume, Defaults to two independent UART interfaces. All I/O pins are 5V Safe, UART data transfer rates from 300 baud to 12 Mbaud at 3.3V TTL levels, Synchronous Serial(MPSSE) data rates of up to 30Mbps on JTAG. SPI and I2C, One dual-port USB type A connector and 0.1” pitch header to support up to 3 downstream USB ports, Green/Red status LED for downstream USB port 1& 2. LED indicating power supply to external downstream USB ports, On-board EEPROM 93LC56 for FT2232H configuration, UHCI/ OHCI
Buy It Now
Condition: Brand New Location: United Kingdom The AVR Explained expansion headers provide easy access to analog and digital I/O pins. Display data on the 128x32 pixels of the FSTN LCD display. 4 LED's ... moreto show status information and expand the board with Explained top modules.
Buy It Now
Condition: Brand New Location: United Kingdom It has a form factor that enables it to be easily placed on a breadboard. This allows the Micro to appear to a connected computer as a mouse and keyboard, ... morein addition to a virtual (CDC) serial/COM port.
Buy It Now
Condition: Brand New Location: United Kingdom The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout. The power source is selected automatically. ... moreFeatures: AT91SAM3X8E MCU, 54 3.3V I/O, 12 Analogue Inputs, 4 UARTs, 2 DAC Outputs, 2 USBs.
Buy It Now
$40.04 Shipping Condition: Nuevo Location: United Kingdom
Buy It Now
$76.21 Shipping Condition: Neuf Location: United Kingdom
Buy It Now
$76.21 Shipping Condition: Nuovo Location: United Kingdom
Buy It Now
$43.91 Shipping Condition: Neuf Location: United Kingdom
Buy It Now
$43.91 Shipping Condition: Nuovo Location: United Kingdom
Buy It Now
$43.91 Shipping Condition: Nuevo Location: United Kingdom
Buy It Now
$6.45 Shipping Condition: Neu Location: United Kingdom
Buy It Now
$6.45 Shipping Condition: Neuf Location: United Kingdom
Buy It Now
$6.17 Shipping Condition: Nuevo Location: United Kingdom El FT2232HQ-R es un USB 2.0 dual de alta velocidad para UART/FIFO IC multipropósito en un paquete QFN de 64 pines. Este dispositivo USB de quinta generación ... morede FTDI tiene la capacidad de configurarse en una variedad de interfaces seriales o paralelas estándar de la industria. Todo el protocolo USB se maneja en el chip y no se requiere programación de firmware específica de USB. El motor serie síncrono multiprotocolo dual (MPSSE) simplifica el diseño del protocolo serie síncrono (USB a JTAG, I2C, SPI o bit bang). El diseño altamente integrado incluye un regulador LDO de 1,8 V para VCORE, función POR integrada y PLL multiplicador de reloj en chip (12 MHz a 480 MHz). Nos enorgullecemos de asegurarnos de que todos y cada uno de los clientes estén satisfechos antes, durante y después de que se.
Buy It Now
$6.17 Shipping Condition: Nuovo Location: United Kingdom free delivery, express delivery available, excellent feedback, shop with confidence, RPI-HUB-MODULE Ftdi Module. Interface Expansion For Rpi. Product ... moreFeatures. MODULE. INTERFACE EXPANSION FOR RPI, Product Details. Module Applications: Industrial and Telecommunication, Module Interface: USB, Supply Voltage Max: 5V, Supported Devices: FT2232H, Supply Voltage Range: 5V, Product Range information. The information below is for the range this product is part of and may not be information specific to the product. Please contact us if you are unsure of any of the details. Product Range Description. The FT2232H based RPi HUB Module is a USB to UART/245FIFO/SPI/I2C/JTAG/GPIO interface expansion module targeted at connecting to Raspberry-Pi computer to expand the number of interfaces. It can also be used as a hub device or an FT2232H evaluation module. The module has a USB 2.0 Hi-Speed hub chip which supports up to three external downstream USB ports. The FT2232H is a USB 2.0 Hi-Speed(480Mb/s) to UART/MPSSE IC. The device features two interfaces that can be configured for asynchronous or synchronous serial communications or Parallel FIFO Interface. Product Range Features. Standard USB 2.0 Type A plug to connect to the Host, USB Hi-Speed FT2232H device for USB-Serial/Bit bang communications. Entire USB protocol handled by USB module, USB 2.0 Hi-Speed hub controller integrated to support up to 3 downstream USB ports, External power input connector available to supply external downstream USB ports. Support for USB suspend and resume, Defaults to two independent UART interfaces. All I/O pins are 5V Safe, UART data transfer rates from 300 baud to 12 Mbaud at 3.3V TTL levels, Synchronous Serial(MPSSE) data rates of up to 30Mbps on JTAG. SPI and I2C, One dual-port USB type A connector and 0.1” pitch header to support up to 3 downstream USB ports, Green/Red status LED for downstream USB port 1& 2. LED indicating power supply to external downstream USB ports, On-board EEPROM 93LC56 for FT2232H configuration, UHCI/ OHCI
Buy It Now
$6.17 Shipping Condition: Nuevo Location: United Kingdom El ATMEGA32A-AU es una unidad de microcontrolador basada en AVR RISC de bajo consumo y alto rendimiento de 8 bits que cuenta con una memoria de programa ... moreflash autoprogramable de 32 kB, SRAM de 2 kB, EEPROM de 1 kB, convertidor A/D de 10 bits de 8 canales e interfaz JTAG para on- depuración de chips. El dispositivo alcanza un rendimiento de 16 MIPS a 16Mz. Al ejecutar poderosas instrucciones en un solo ciclo de reloj, el ATmega32A logra rendimientos cercanos a 1 MIPS por MHz, lo que permite que el sistema optimice el consumo de energía en comparación con la velocidad de procesamiento. El núcleo combina un rico conjunto de instrucciones con 32 registros de trabajo de propósito general. Los 32 registros están conectados directamente a la Unidad Lógica Aritmética (ALU), lo que permite acceder.
Buy It Now
Condition: New Location: LUTON, United Kingdom Industrial, Computers & Computer Peripherals. Global pull-up disable. Software selectable clock frequency. Six sleep modes - Idle, ADC noise reduction, ... morepower-save, power-down, standby and extended standby.
Buy It Now
Condition: Brand New Location: United Kingdom 8BIT 128K FLASH MCU, TQFP64, 128. Core Size: 8bit. IC Generic Number: 128. Logic Function Number: 128. Digital IC Case Style: TQFP. During that process ... moreyou will be issued with an RMA number. Clock Frequency: 16MHz.
Buy It Now
Condition: Brand New Location: United Kingdom MCU Case Style: DIP. During that process you will be issued with an RMA number. Product Details. On chip 2 cycle multiplier. Images shown are for demonstration ... morepurposes.
Buy It Now
$6.45 Shipping Condition: Nuevo Location: United Kingdom free delivery, express delivery available, excellent feedback, shop with confidence, RPI-HUB-MODULE Ftdi Module. Interface Expansion For Rpi. Product ... moreFeatures. MODULE. INTERFACE EXPANSION FOR RPI, Product Details. Module Applications: Industrial and Telecommunication, Module Interface: USB, Supply Voltage Max: 5V, Supported Devices: FT2232H, Supply Voltage Range: 5V, Product Range information. The information below is for the range this product is part of and may not be information specific to the product. Please contact us if you are unsure of any of the details. Product Range Description. The FT2232H based RPi HUB Module is a USB to UART/245FIFO/SPI/I2C/JTAG/GPIO interface expansion module targeted at connecting to Raspberry-Pi computer to expand the number of interfaces. It can also be used as a hub device or an FT2232H evaluation module. The module has a USB 2.0 Hi-Speed hub chip which supports up to three external downstream USB ports. The FT2232H is a USB 2.0 Hi-Speed(480Mb/s) to UART/MPSSE IC. The device features two interfaces that can be configured for asynchronous or synchronous serial communications or Parallel FIFO Interface. Product Range Features. Standard USB 2.0 Type A plug to connect to the Host, USB Hi-Speed FT2232H device for USB-Serial/Bit bang communications. Entire USB protocol handled by USB module, USB 2.0 Hi-Speed hub controller integrated to support up to 3 downstream USB ports, External power input connector available to supply external downstream USB ports. Support for USB suspend and resume, Defaults to two independent UART interfaces. All I/O pins are 5V Safe, UART data transfer rates from 300 baud to 12 Mbaud at 3.3V TTL levels, Synchronous Serial(MPSSE) data rates of up to 30Mbps on JTAG. SPI and I2C, One dual-port USB type A connector and 0.1” pitch header to support up to 3 downstream USB ports, Green/Red status LED for downstream USB port 1& 2. LED indicating power supply to external downstream USB ports, On-board EEPROM 93LC56 for FT2232H configuration, UHCI/ OHCI
Buy It Now
$6.45 Shipping Condition: Nuovo Location: United Kingdom free delivery, express delivery available, excellent feedback, shop with confidence, RPI-HUB-MODULE Ftdi Module. Interface Expansion For Rpi. Product ... moreFeatures. MODULE. INTERFACE EXPANSION FOR RPI, Product Details. Module Applications: Industrial and Telecommunication, Module Interface: USB, Supply Voltage Max: 5V, Supported Devices: FT2232H, Supply Voltage Range: 5V, Product Range information. The information below is for the range this product is part of and may not be information specific to the product. Please contact us if you are unsure of any of the details. Product Range Description. The FT2232H based RPi HUB Module is a USB to UART/245FIFO/SPI/I2C/JTAG/GPIO interface expansion module targeted at connecting to Raspberry-Pi computer to expand the number of interfaces. It can also be used as a hub device or an FT2232H evaluation module. The module has a USB 2.0 Hi-Speed hub chip which supports up to three external downstream USB ports. The FT2232H is a USB 2.0 Hi-Speed(480Mb/s) to UART/MPSSE IC. The device features two interfaces that can be configured for asynchronous or synchronous serial communications or Parallel FIFO Interface. Product Range Features. Standard USB 2.0 Type A plug to connect to the Host, USB Hi-Speed FT2232H device for USB-Serial/Bit bang communications. Entire USB protocol handled by USB module, USB 2.0 Hi-Speed hub controller integrated to support up to 3 downstream USB ports, External power input connector available to supply external downstream USB ports. Support for USB suspend and resume, Defaults to two independent UART interfaces. All I/O pins are 5V Safe, UART data transfer rates from 300 baud to 12 Mbaud at 3.3V TTL levels, Synchronous Serial(MPSSE) data rates of up to 30Mbps on JTAG. SPI and I2C, One dual-port USB type A connector and 0.1” pitch header to support up to 3 downstream USB ports, Green/Red status LED for downstream USB port 1& 2. LED indicating power supply to external downstream USB ports, On-board EEPROM 93LC56 for FT2232H configuration, UHCI/ OHCI
Buy It Now
$6.45 Shipping Condition: Neuf Location: United Kingdom
Buy It Now
Condition: Brand New Location: United Kingdom This allows system designer to optimize power consumption versus processing speed. MCU Case Style: TQFP. During that process you will be issued with an ... moreRMA number. Product Details. Images shown are for demonstration purposes.
|
|
|
|