Buy It Now
Condition: For parts or not working Location: Matthews, United States ABB FlexArc 500C Robotic Welding Cell General Info: Stock# JG-141011 Machine Name: ABB FlexArc 500C Condition: Used. Good Tested: Yes. Good Working Condition ... moreBrand: ABB Model: FlexArc 500C Year: 2003 Approximate Shipping Weight: 1500 Lbs. Approximate Shipping Dimensions: 137.5" L x 89.5" W x 76.5" H Location: GA Specifications: Controller/Positioner ABB IRBP S4C Robot IRB1400 M2000 Controller 4.5 KVA 475 V 50-60 Hz 3 Ph Includes Hand Held Controller Built In 2003 Welder Miller Auto Invision II 450 A@ 38 Volts DC@ 100% Duty Cycle 565 A@ 43 Volts DC@ 60% Duty Cycle 10-38 Voltage Range 50 to 780 IPM Wire Feed Range.030 to.062 Inch Wire Diameter Range 95 Maximum Open Circuit Votage DC 31 Amperes Input at Rated Load Output 60 Hz. 3 Ph 21.6 KVA 19.4 KW Cell FlexArc C Dual Pallet(Hexagonal- 42" Wide. 32" Wide, 34" Long) Equipped with Dust Hood Welding Cell- 110.5" L x 89.5" W x 124" H Additional Info: The ABB FlexArc 500C has very little use and is in excellent condition. The machine was purchased with the intent on doing some contract work. The work never happened and now the system is no longer needed. The FlexArc is currently under power and can be demoed if needed. Seller Contact Information: Jamie Gose 404-630-3657 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 Are you looking for a different machine than the one listed? Visit our to see other machinery options. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week.
Buy It Now
Condition: Used Location: Englishtown, United States Model GT328 DDY. Machine Weight 4,000 lbs. Rapid Traverse Rates 591 IPM. Milling Spindle Motor 1 HP - Both ID & OD. Number of ER-16 ID Tools 2 Live Stations. ... moreNumber of ER-16 OD Tools 4 Live Stations.
Buy It Now
Condition: Used Location: Delta, United States Stainless Steel Tube Mill. Unit To Be Swung Around The Pin. To The Front Or Rear. Base to Center Line: 8-3/8". Rotationally About A Center Pin Allowing ... moreFor The. Originally On The Exit End Of A Small M-1/2 Yoder.
Buy It Now
Condition: Used Location: Casa Grande, United States With Tooling. KNEE TRAVEL: 15-1/2". WEIGHT CAP.: 500 LB. X-AXIS TRAVEL BED: 21" - 25". Z-AXIS TRAVEL BED: 16" - 20". Y-AXIS TRAVEL BED: 10" - 15". WEIGHT: ... more4,000 LBS.
Buy It Now
Condition: Used Location: Manvel, United States Part # 49101. Jergens 16" X 16" X 1.125" steel Sub-Plate. This plates were in a Haas VF2SS before the manufacturer upgraded to a horizontal machine.
Buy It Now
Condition: Used Location: Byron Center, United States 2012 Kent SGS-1230AHD Automatic Surface Grinder. Over the Wheel Dresser. Kanetsu Model KET-3070K Electro Magnetic Chuck. 23.6" Spindle to Table. 1750rpm ... moreSpindle Speed. 5HP Spindle Motor. 6000lb Machine Weight.
Buy It Now
Condition: Used Location: Redwood City, United States Machine is in great working condition. Very well maintained and kept clean.
Buy It Now
Condition: Used Location: Toledo, United States Model#TDK-1000/3 CHD. MIN BEAM LENGTH: 63". MAX WIDTH: 40". MAX HEIGHT: 24". HYDRAULIC POWER: MOTOR 10 HP. Serial# 47565676987012.
Buy It Now
Condition: Used Location: Woodstock, United States HRT 160 indexer. ... Included. - Haas Editor ……………………………………………………………. - 40 Taper 15k rpm direct drive Spindle ……………………………. - Side mount 40 pocket Tool ... moreChanger ……………………………….
Buy It Now
Condition: Used Location: Byron Center, United States Work and Tool Probing System. 2012 Haas VM-2 CNC Vertical Machining Center. Chip Auger. 4th Axis Drive and Wiring. View Phone Number. The machine is being ... moresold "as-is, where-is" with no warranty. Inspections are highly encouraged.
Buy It Now
Condition: Used Location: Alto, United States Asset # 14326. Mills is equipped with a Bridgeport x-axis power feed and Baldor y-axis power feed. Knee Travel (Z-Axis) 16”. Power Quill Feed 0.0015”/rev. ... moreSerial # N/A. Height above Floor (Max.). Low 60 – 500 rpm.
Buy It Now
Condition: Used Location: Davenport, United States Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. Maximum Tool Weight: 43 Lbs. Preliminary Specifications ... moreSubject to Verification. All machine sales are subject to machine availabilty.
Buy It Now
Condition: Used Location: Los Angeles, United States Hydraulic Mandrel Extractor. Catalogue Specifications Maximum Tube Bending Capacity: 4" OD x 0.109" WT (mild steel). Maximum Tube Length Over Mandrel: ... more168" (approx). Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only.
Buy It Now
Condition: Used Location: Lees Summit, United States 32" x 19" x 22" Milltronics Model MB19-A 3-Axis CNC Bed Mill(1998) Specifications Table Size: 13" x 50" X-Axis Travel: 32" ... moreY-Axis Travel: 19" Z-Axis Travel: 22" Spindle Taper: 40, Spindle Speeds: 4500 rpm, Main Motor Drive: 5 HP, Equipped With: Centurion VI CNC Control, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
Buy It Now
Condition: Used Location: Dundee, United States Mazak HTC400 Z Axis Way Cover Right Side (Underspindle). Mazak ID: 12405307743. This item was removed off a 1996 Mazak HTC400. Cover was also refurbished ... more04/2010. 06Z-008 Slide Way Cover 4 Step HTC400-Z Axis - R (SP-PT).
Buy It Now
Condition: Used Location: Philadelphia, United States Reference #16326. 11" Magnetic Chip Conveyor. Smallest Transmission Ratio. . 1:1. Largest Transmission Ratio. . Mist Collector. Swivel Range (Degrees). ... more. -7 up to 90.
Buy It Now
Condition: Used Location: Alto, United States Asset # 14130. Knee Travel (Z-Axis) 16”. Mill is equipped with a power draw bar. Power Quill Feed 0.0015”/rev. Serial # BR267700E. Height above Floor ... more(Max.). Low 60 – 500 rpm. Table travel (X-Axis) 36”.
Buy It Now
Condition: Used Location: Hemet, United States Up for sale is a 100w C02 laser from Cam Five. This laser has a 30x40” honey comb, down draft, top on it for engraving and cutting, or remove it and install ... morethe included 4th axis rotary to engrave round objects like water bottles.
Buy It Now
Condition: Used Location: Oxnard, United States 2010 Haas ST-30SS. CNC Lathe w/ Live Tooling. Turret 24 Station. Live Tooling C-Axis Live Tooling. 2020 Haas ST-20Y CNC Lathe Robot Y-Axis Live Tooling. ... moreSwing 31.75". Spindle Speed 4,800 RPM. Chuck Size 10".
Buy It Now
Condition: Used Location: Alto, United States Asset #12340. Knee Travel (Z-Axis) 16”. Mill is equipped with power feed on the x axis. Duty Cycle 3 HP. Power Quill Feed 0.0015”/rev. Serial # BR260496. ... moreWe are always looking to buy machinery – 1 piece or entire plants.
Buy It Now
Condition: Used Location: United States Okuma MC-V4020. Vertical Machining Centers. Horizontal Machining Centers. cnc machines. SPINDLE SPEEDS RANGE: 50-8,000 RPM. New Arrivals. Machine sold ... moresubject to prior sale. (NEW SPINDLE INSTALLED LESS THAN 1 YEAR AGO).
Buy It Now
Condition: Used Location: Milwaukee, United States Pre Owned 90 Ton X 28’ Cincinnati FM Tandem Hydraulic Press Brakes. Aleco Machinery. Pedestal Palm Button Station. Overall Length of Bed & Ram 28’. Capacity ... more90 TONS. Main Motor Horsepower 17.5. Open Height 15”.
Buy It Now
Condition: Used Location: Puyallup, United States Specifications: ---Make: Tsudakoma ---Model: RNCK-501 ---Type: 4th Axis Rotary Table Capacity: ---Table: 20" Equipped With: ---1 ft Riser ---Cables.
Buy It Now
Condition: Used Location: Lithia, United States Plasma Power: 100. # Plasma Torches: 1. Cutting Speed: 300 IPM. Press Brakes. Coming soon. Lithia, FL 33547. Southern Fabricating Machinery Sales, Inc. ... moreCut-Length: 96".
Buy It Now
Condition: Used Location: Priest River, United States Very tight machine. Have them on thumb drive, just need to be loaded.
Buy It Now
Condition: Used Location: Phoenix, United States 2016 Loewer MMLZCCX3.150. Deburring Machine. Two Part Safety Guard. We work with you to find the right industrial machine tools, and provide services ... moreto help you with financing machines, liquidation, appraisals, and more.
Buy It Now
Condition: New – Open box Location: Gallipolis Ferry, United States These do not fit any of our machines. I guess that they are for a shear that is no longer here. Part No’s. 28488 & 28489 maybe. It is difficult to read. ... moreThe hole centers begin 1-1/2” from either end and there are 18 evenly spaced at 9” center to center.
Buy It Now
Condition: Used Location: Lithia, United States X-Y Axis Linear Position Accuracy: +/- 0.0008". X-Y Axis Position Repeatability: +/- 0.0004". Maximum X-Y Axis Travel Speed: 32Ft/Min. Located in the ... moreTampa Florida suburb of Lithia, Southern Fabricating Machinery Sales is a full service machinery dealer.
Buy It Now
Condition: Used Location: United States HAAS VF-8/50. Vertical Machining Centers. Horizontal Machining Centers. cnc machines. HIGH-SPEED MACHINING. -Y AXIS: 40". New Arrivals. SPINDLE TAPER: ... moreCAT 50.
Buy It Now
Condition: Used Location: Alto, United States Asset # 14567. Distance Spindle to Column Ways 10″. Distance Spindle to Column Below Ways 13.5″. Working Surface of Table 11″ x 24″. Table Travel, Cross ... more& Longitudinal 11″ x 18″. Distance Table Top to Wheel Collet 2″ – 18″.
Buy It Now
Condition: Used Location: Philadelphia, United States Reference #31467. Porta TRV-08-N-16-90-110 CNC Rotary Transfer Machine. Automatic Tool Changer. 8 Machining Stations. Stations. . 8. STATION 1 Chip Conveyor. ... moreSTATION 2.
Buy It Now
Condition: Used Location: Farmington, United States 1993 Mazak HV-800, 5 axis, 6 Pallet HMC. (3) available. We also have the following HMC machines available. 1999 Mitsubishi Model MH500 CNC HMC, 50 Taper, ... moreFanuc 18M, 60 ATC; 6000 RPM, Coolant Through Spindle, Full 4th axis.
Buy It Now
Condition: Used Location: Milwaukee, United States (1)Pre Owned 115 Ton Gasparini PBS105-3000 CNC Hydraulic Press Brake. Tonnage Capacity: 115 US Tons. Stroke: 7.9". pedestal palm station / Electric Foot ... moreSwitch. Main Motor Horsepower 15 480/3/60. high speed servo hydraulic system.
Buy It Now
Condition: Used Location: United States .0° - 45° Grinding Wheel Head Travel.. ____ HP Electrical Characteristics..18,000 lbs. Casa Grande, AZ.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Catalogue Specifications Laser Capacity: 2000W. Fanuc LU2.5 AF2000E 2KW Resonator. All machine sales are subject to machine availabilty. Unless specifically ... morestated in writing by PMS, all freight carriers must use flat bed truck only.
Buy It Now
Condition: Used Location: Elk Grove Village, United States All machine sales are subject to machine availabilty. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. ... moreMotion Speed (Degrees/s). Now you can! Need to call us?.
Buy It Now
Condition: Used Location: Grand Rapids, United States Machine is equipped with Newall Sapphire 2-Axis DRO, X-Axis Powerfeed, Hardened and Ground Box Type Ways, AC Variable Frequency Drive, 6" Machine Vise, ... moreCollet Set, JAcobs Drill Chucks, Work Light, Lube System.
Buy It Now
Condition: Used Location: Lithia, United States Located in the Tampa Florida suburb of Lithia, Southern Fabricating Machinery Sales is a full service machinery dealer. Southern Fabricating Machinery ... moreSales, Inc. We at Southern Fabricating Machinery Sales are manufacturer's just like you.
Buy It Now
Condition: Used Location: Lithia, United States X-Y Axis Linear Position Accuracy: +/- 0.0008". X-Y Axis Position Repeatability: +/- 0.0004". Maximum X-Y Axis Travel Speed: 32Ft/Min. Located in the ... moreTampa Florida suburb of Lithia, Southern Fabricating Machinery Sales is a full service machinery dealer.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Catalogue Specifications Maximum Swing: 31.7". X-Axis Travel: 22.64". Z-Axis Travel: 118". SMWSLU-4-ZS Powered Steady Rest 1.18" - 9.64" Cap. Spindle ... moreMotor: 50 HP. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only.
Buy It Now
Condition: Used Location: Toledo, United States All Wet Areas are Stainless Steel Construction. Programmable Flow of Up to One Gallon/Min. Complete Recycling and Filtering of the Wash Fluid System. ... moreCan also be used to Dry as the Last Function. Turntable for Loading and Unloading while Second Table of.
Buy It Now
Condition: Used Location: Santa Paula, United States MDL: VMD30 SERIES B. MAKE: MILLTRONICS. X-AXIS: 109". TABLE SIZE: 109" X 24". 109 N. Olive Ave. Santa Paula, CA 93060. Z-AXIS: 24". TOOL CAPACITY: 20 ... moreATC. We try to provide good pictures for your consideration.
Buy It Now
Condition: Used Location: Milwaukee, United States Pre Owned Cincinnati Model 90CB Hydraulic Press Brake. Main Motor Horsepower 15. Capacity 90 TONS. Open Height 15”. Clevis Mounted Self Aligning Cylinders. ... moreInterlocked Construction. Electric Foot Switch.
Buy It Now
Condition: Used Location: Puyallup, United States Specifications: ---Make: Eagle ---Model: EPT-100 ---Year: 1992/ Retrofitted 2004 ---Type: CNC Tube Bender Capacity: ---Bending OD: 4" ---Wall Thickness: ... more.062" ---Center Line Radius: 4" - 8" ---Carriage Travel: 156" ---Length Over Mandrel: 2"-158" ---Mandrel Stroke: 12" ---Max Bend Angle: 190° ---Bend Arm Cylinder (C-Axis): 4" ---Bend Arm Speed: 8 RPM ---Carriage Travel (Y Axis): 1800 IPM ---Plane of Bend (B Axis): 40 RPM ---Motor: 40 HP Equipped With: ---Manuals ---BendPro G2 Control ---NO TOOLING.
Buy It Now
Condition: Used Location: Grand Prairie, United States This is a good condition large laser table top enclosure that was used with a 50W YAG marking laser. It is around 15 years old, where several of those ... moreyears were storage as a backup to the new system.
Buy It Now
Condition: Used Location: Kenosha, United States Condition is "Used". Approximate Weight 32000 lbs. Loaded on Truck with this price only. MACHINE IN POWER. RS 232 Port & 3.5" Floppy. Rigid Tapping. Remote ... moreJog Handle. 5-AXIS Troyke TDL-15A Trunnion Table.
Buy It Now
Condition: Used Location: Lenexa, United States X-Axis Travel: 32" + 8" Beyond Table Edge. Y-Axis Travel: 24". Z-Axis Travel: 20". Max Roll Width: 6-1/4". Dress Roll: 1 Provided. Speed Range: 0 - 5000 ... moreRPM. Run Out Both Radially and Axially: 0.0001".
Buy It Now
Condition: Used Location: Ankeny, United States X-Axis Movable Range: 3.94". Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. All machine sales are subject ... moreto machine availabilty. Now you can! Need to call us?.
Buy It Now
Condition: Used Location: Milwaukee, United States Atlanta 3rd Axis Chuck off Trumpf 2503E Laser. Type : 58 44 139. n1 : 1500 U/min.
Buy It Now
Condition: Used Location: Palmyra, United States Double power modules for two axes, single for third axis.
Buy It Now
Condition: Used Location: Hull, United States Complete package for adding 4th and 5th axis to your machine. Cables are for a non HAAS machine. Table has been serviced and inspected by a local technician. ... moreCan be inspected under power in Georgia.
Buy It Now
Condition: Used Location: Thailand PRODUCT: Femco CNC Boring Mill. INCLUDE: Manuals. QTY: 1 UNIT. Weight: 50,000lb.
|