|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: Used Location: Endicott, United States Normal 0 MODEL NUMBER, S) MARKED ON THIS ITEM IS: DM-224I-EDN DIMENSIONS OF THIS ITEM(IN APPROX INCHES) ARE: 3 3/4 Length(depth) x 2 Wide x 5 1/8 High. ... moreWHAT WAS TESTED ON OR WITH THIS SPECIFIC ITEM: UNTESTED SURPLUS MAY BE NEW OR USED WHAT WE FOUND* GUARANTEED NO DOA*To assist you the buyer. We often test most items prior to listing as noted above. This is only to guide you as to what we experienced and does not in any way guarantee you will have the same results when used in your situation or with variables at your end. SAFE. HONEST SELLER- SEE OUR HIGH FEEDBACK AND BID WITH CONFIDENCE! PLACE HIGH BID EARLY or buy now(if available) AS MOST OUTBIDDING IS DONE IN THE LAST MINUTE! SEE OUR OTHER AUCTIONS AND STORE THERE MAY BE MORE OR DEALS YOU DID NOT THINK TO LOOK FOR. QUESTIONS: Ask all questions early as we are sometimes out of town a few days at a time and many weekends. We usually answer emails within a few days. Often the same day, but NOT ALWAYS, so if you are the impatient"instant messaging demanding" type of bidder, please do not bid. SHIPPING POLICY: COST: Click on“shipping and payments tab” on this page and type in your zip code to find shipping cost or options available for this auction. SHIPPING CHARGES ARE NOT NEGOTIABLE AFTER YOU BID(OR ON ANY BEST OFFERS) we generally use only the shipping options shown. Do not bid and then ask us to change the price or method. We do NOT use COD. 3 rd party, or bill to account numbers. We do not have access to Fed EX. UPS is insured and trackable along the way. US postal is not as easily trackable- generally shows pickup and delivery only. SHIPPING ARRIVAL TIMES, generally we ship out items within 1 to 5 business days depending on our schedule. Then it takes an additional 2-6 BUSINESS DAYS in transit depending on your location, so it may take 1-2 weeks before your item arrives. If you need it faster. ASK PRIOR TO BIDDING if we can accommodate your tim
Buy It Now
Free Shipping Condition: New Location: United States Q1:why other supplier's TB6560 driver has 3.5A/3A current,but yours is 2.5A?. Supports a lot of stepper motors. 4-wire 0-3.5A normally 3A, the 3.5A is ... morethe peak currentcan be regulated rate current output, bipolar stepper motor driver.
Buy It Now
$5.32 Shipping Condition: New Location: Burnsville, United States 1800RPM, 120V, 60Hz. Bristol Saybrook. Synchronous Stepper Motor. M-T 0800-1600 (800am to 400pm). Our hours of operation are We are located in Burnsville, ... moreMN. Location: 8102C-1.
Buy It Now
Free Shipping Condition: New Location: China Applicable stepper motor: 42,57,86 type of 2-phase 4-phase (4-wire 6 wire line 8). Because, our prices are unable to include above fees, as the custom ... morepolicies are different in every territories. But, we'd like to assist you to receive the goods smoothly if there are anything we can do here.
Buy It Now
Free Shipping Condition: Brand New Location: China Dual Y axis interface, can drive 2A 4 phase 2 wire stepper motor. Support Stepper Motor: Motor within 2A 2-phase 4-wire. 1X USB 2 Axis Stepper Motor Driver ... moreBoard. Fit for DIY desktop laser engraver, dispensing machines printer, plotter.
Buy It Now
$28.90 Shipping Condition: New Location: Erie, United States Thorlabs BSC002 Bench Two-Channel Stepper Motor Controller(w/2 cables) Model BSC-001(Same as BSC102) Retails for over 2K- Works perfect! Fast free shipping! ... more100% Feedback!
Buy It Now
$5.49 Shipping Condition: New Location: China New Aluminum Mounting Bracket For 57mm NEMA23 Stepper Motor WHITE of Aluminum OK FD259. New Aluminum Mounting Bracket For 57mm NEMA23 Stepper Motor WHITE ... moreof Aluminum OK. For 57mm NEMA23 Stepper Motor Alloy Steel Mounting Bracket.
Buy It Now
$14.00 Shipping Condition: New Location: Newtown, United States KL-5056E Digital Stepper Driver • Multi-Stepping allows a low resolution step input to produce. • Full or Half Current, Sw4: Off= Half Current. • Output ... morecurrent programmable, from 0.5A to 5.6A(Can be set by Dip switch too).
Buy It Now
$10.53 Shipping Condition: Used Location: Riceville, United States The item was plugged in. No further tests were done..
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Stepper Drive TB6600. In the user expects low cost, high current operation. Stepper Motor Drive System. Can drive 4, 6 and 8 Lead two-phase, four-phase ... morestepper motor. CNC Machine Parts. 3D Printer. Servo Motor Drive System.
Buy It Now
Free Shipping Condition: New Location: Burlington, United States Bimba DRV-4 Stepper Drive. Condition: New.
Buy It Now
$5.00 Shipping Condition: New – Open box Location: Sylmar, United States READ… READ. READ… READ ! I am not here to cheat any one or take any one’s hard earned money. WHAT YOU SEE IS WHAT YOU GET. IT WILL ONLY TAKE 30 SECONDS. ... moreIf this is the case and you still want the item.
Buy It Now
Free Shipping Condition: New Location: Concord, United States This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 57,60,86 type 2-phase (4-wire, 6-wire, 8-wire). Output ... morePeak Current: 1.4~5.6A. Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise.
Buy It Now
$33.20 Shipping Condition: Used Location: Painesville, United States It powers up but has not been tested. There are TWO initially available (see last picture).
Buy It Now
Free Shipping Condition: New Location: Hainesport, United States Stepper drive subdivision adjustable. X/Y/Z/A four-axis drive, Y-axis dual drive. Support for rotary axis. Product Specifications:4 Axis. Reserve 24V, ... more12V, 5V power output ports to facilitate the expansion of various functions.
Buy It Now
Free Shipping Condition: For parts or not working Location: San Diego, United States (x2) Nanotec SMCI33-2 Stepper Motor Driver with Integrated Controller *Untested*. *Note: These 2 units are Untested, I have no way of testing these. There ... moreis no listing category , “untested & used” so that is why they are listed in the category “for parts or not working.”*Note: the blue paint on one of the top of of the front of 1 of the 2 units is faded, but there are no damages (see unit on right side of picture #1).*Note: 2 of the 4 green connectors that plug into the side of each units are missing (see picture #4).
Buy It Now
Free Shipping Condition: Used Location: Zionsville, United States X-NUCLEO-IHM03A1 stepper motor expansion board for STM32 Nucleo boards. Uses the POWERSTEP01 driver IC.
Buy It Now
Free Shipping Condition: New Location: Spring Hill, United States Piece of 18AWG 4 lead (. tinned copper leads for maximum conduction ) Double Shielded Robotics Grade Cable. The PVC casing is very flexible designed for ... morerobotics, and rated to 300v, and 80 Celsius (176 degrees Fahrenheit).
Buy It Now
Free Shipping Condition: Used Location: Rexburg, United States This is a working unit in good Overall condition.
Buy It Now
Free Shipping Condition: New Location: China Input and Output: all input is optocoupler isolation, while output the negative pulse. The low level signal is valid. Output Frequency: up to 20KHz. Operation ... moremode: (dip switch, 1-up, 0-dow n). Start the motor and it will be in forward rotation again on and on.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States 4.2A of 42,57,86 fit within the two-phase / four-phase / four-wire / six-wire stepper motor. Used to increase the heat sink, good heat dissipation. The ... moreuse of high-speed optical coupling 6N137, ensure high speed without losing step.
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Parker Compumotor. # of Axis: 4. Office Hours If you do not have an account No Worries! The Original Manufacturer's warranty does not apply. This is a ... moresurplus item. SKU# SB-157975.
Buy It Now
$3.77 Shipping Condition: Neu Location: China Nano Sheild. It can run independently as a module, or it can be used in conjunction with other systems. Adapted motor: stepper motor. Adaptive motor: ... moreStepper motor. The distance / speed / delay / number of cycles can be saved and set after power down.
Buy It Now
$16.40 Shipping Condition: New – Open box Location: Salem, United States New no box.
Buy It Now
$14.05 Shipping Condition: Used Location: San Tan Valley, United States Pacific Scientific Stepper Motor Drive Model: 6415-001-N-N-N Used Surplus. Excess Inventory Listing Includes Only What is Shown in Pictures See Pictures ... morefor Information! No Way to Test Items Money Back if DOA Will Combine Ship! Bitter End Trading is an asset recovery wholesaler specializing in new and used surplus industrial equipment. Bitter End Trading is not a representative of any manufacturer listed; all names. Logos, descriptions and other related information are trademarks of their respected companies or manufacturers. All items listed are identified as either new or used and the new may be older surplus. We list all items to the best of our ability and aim to provide the customer with as much information as possible. Bitter End Trading is not liable for any products sold. The customer is responsible for proper testing, installation and use of equipment purchased. No warranties are expressed or implied. Combined Shipping Policy We will combine shipments to reduce costs for customers purchasing multiple items. After customers have completed their multiple purchases they should request an invoice. We will package and weigh the entire purchase and provide an invoice. Including shipping and handling. Shipping rates are generated using the EBAY shipping calculator. Handling charges. Per shipment are: $3.00 for Domestic and $10.00 for International. Domestic Shipping. We ship using UPS and FedEx to provide en-route package tracking. International Shipping We ship using UPS. FedEx and USPS. Items shipped by UPS and FedEx are more efficient and provide customers with en-route tracking. Items shipped by USPS cannot be tracked. International buyers are responsible for any and all applicable customs. Duties, taxes and fees. Freight Shipping We have very competitive rates for shipping freight. All items are palletized and shrink wrapped before they leave the warehouse. If shipping to residential address. There is an additional fee assessed by the freight company. Email us with your zip code for an accurate freight
Buy It Now
$22.59 Shipping Condition: New – Open box Location: Utica, United States CONDITION: NEW NO BOX. SEE PICTURES.
Buy It Now
Free Shipping Condition: New Location: United States Item Type: Stepper Motor Driver Board. Application: Stepper Motor, DC Motor. Feature: 1. Adjustable Speed Range: 0.1-999 rpm.
Buy It Now
Free Shipping Condition: New Location: China Dual Y axis interface, can drive 2A 4 phase 2 wire stepper motor. Support Stepper Motor: Motor within 2A 2-phase 4-wire. 1X USB 2 Axis Stepper Motor Driver ... moreBoard. Fit for DIY desktop laser engraver, dispensing machines printer, plotter.
Buy It Now
Free Shipping Condition: New Location: China Motor type: (M+,M-) Not stepper motor. Output Current: 3A Max. Due to the light and screen difference, the item's color may be slightly different from ... morethe pictures.
Buy It Now
$17.66 Shipping Condition: Used Location: Woodbury, United States The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. We will respond to ... moreyou within 24 hours and do our best to help you out!
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution. Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor.
Buy It Now
Free Shipping Condition: New Location: United States
Buy It Now
Free Shipping Condition: New Location: China Brand Leadshine MPN Does Not Apply Model NEMA 23 UPC 756910778545.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China 1 x TB6600 Stepper Driver. In the user expects low cost, high current operation. Stepper Motor. Can drive 4, 6 and 8 Lead two-phase, four-phase stepper ... moremotor. Signal input: single ended, pulse / direction.
Buy It Now
$4.50 Shipping Condition: New Location: Sacramento, United States You are buying one half of a lovejoy coupling with 8 mm bore. Combined with a coupling spyder, and another Half coupling-- this assembly has a tight fitting ... morebuna-N rubber spyder for low noise power transmition, and is super easy to disassemble.
Buy It Now
$27.74 Shipping Condition: New – Open box Location: Manchester, United States NEW SUPERIOR ELECTRIC SLO-SYN STEPPER MOTOR. UNITS ARE NEW IN THE BOX. You may also be interested in. WIRING DIAGRAM.
Buy It Now
$3.99 Shipping Condition: New Location: Derry, United States Note: This Item will ship by International Registered Mail(with Tracking number) or E-express(US only) Description: The EasyDriver is a simple to use ... morestepper motor driver. Compatible with anything that can output a digital 0 to 5V pulse(or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver) EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version(v4.4) we fixed the silk error on the min/max adjustment. This is the newest version of EasyDriver V4 co-designed with. It provides much more flexibility and control over your stepper motor. When compared to older versions. The microstep select(MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control. Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC. Note: This product is a collaboration with Brian Schmalz. A portion of each sales goes back to them for product support and continued development. Features: A3967 microstepping driver, MS1 and MS2 pins broken out to change microstepping resolution to full. Half, quarter and eighth steps(defaults to eighth) Compatible with 4. 6, and 8 wire stepper motors of any voltage, Adjustable current control from 150mA/phase to 750mA/phase, Power supply range from 7V to 30V. The higher the voltage. The higher the torque at high speeds, Payment: We only accept Paypal at this moment· If you want to buy a large quantity please contact me directly Shipping: Items will be shipped within 2 business days after payment is completed(Saturday. Sunday and public holidays is not counted) United
Buy It Now
Free Shipping Condition: New Location: United States QUALITY-GADGETS eBay Item! Upgrade Usb 5 Axis Cnc Breakout Board Interface Adapter For Stepper Motor Driver 5 Axis USB Breakout Board For CNC Single Stepper ... moreMotor Driver Controller Descriptions: The latest upgraded salable 5 axis breakout board is speacilly designed for the CNC single axis stepper driver controller. Such as M542, M542H, MA560, MA860H, 2M542, 2M982, DM542(A) DM860(A) etc single axis stepper driver controller series. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc. Key Features: Upgraded circuit. Work more peacefully and steady than the previous version Maximum support 5-axis stepper motor driver controllers Two ways to get power. 5V DC power supply or USB port to get power from PC directly Two-stage signal processing. Smooth signal transmission, powerful anti-jamming 5-input interface to define the Limit. Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc. Relay output control interface. Accessed by the spindle motor or the air pump, water pump, etc. 5-axis work LED display. Visually display the working condition of the stepper driver controller Wiring Diagram: Electrical properties(ambient temperature Tj = 25 ℃ pm) Input Power 5V DC power supply or USB port to directly get power from PC Compatible Stepper Motor Driver Max 5 single axis stepper motor driver controller Drive type Pulse + Direction + Enable Signal Control Net/Total Weight Approx 80g/300g Dimensions 90* 82* 15mm(L*W*H) 1 x 5 Axis Breakout Board 1 x DB25 Parallel Cable 1 x USB Power Cable 1 x CD Click here for the Mach3 software USD 201.79(Free P&P* USD 184.11(Free P&P* USD 271.19(Free P&P* USD 56.64(Free P&P* USD 60.19(Free P&P* USD 83.80(Free P&P* USD 86.99(Free P&P* USD 66.89(Free P&P* GBP 260.29(Free P&P* GBP 233.19(Free P&P* USD 58.58(Free P&P* USD 77.69(Free P&P* GBP 89.29(Free P&P* USD 63.79(Free P&P* USD 35.88(Free P&P* USD 31.59(Free P&P* USD 69.99(Free P&a
Buy It Now
Free Shipping Condition: New – Open box Location: Powhatan, United States Nature of the item. We are more than happy to help you try to resolve any issues you have. This will avoid us opening an unpaid item case.
Buy It Now
Free Shipping Condition: New Location: United States Adaptive motor: Stepper motor. The distance / speed / delay / number of cycles can be saved and set after power down. It can run independently as a module, ... moreor it can be used together with other systems.
Buy It Now
$9.95 Shipping Condition: New Location: Jackson, United States NVCM support Mach3 software, through USB port to communicate with computer. - When operate the NVCM, where will be a lot of English abbreviation, now ... morewe list all. X axis Coordinate Y axis Coordinate Z axis Coordinate A axis Coordinate.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 5 UEETEK DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink for 3D Printer. - DRV8825 driver board is widely used in 3D printers and small ... moreCNC machines. - Stepper Motor Driver is a board for DRV8825 microstepping bipolar stepper motor driver.
Buy It Now
Free Shipping Condition: New Location: United States 【US】Nema23 Stepper Motor Mount Bracket Support w/ Screws. 1 x Nema23 stepper motor mount installation bracket. 4 x Nema23 installation bracket setscrews.
Buy It Now
$16.31 Shipping Condition: Used Location: Leander, United States (1) Pacific Scientific T21NRLC-LDN-NS-00 Dual Shaft Stepper Motor. Stepper Motor. Manufacturer:Pacific Scientific. Manufacturer: Pacific Scientific. This ... morestep motor is in good condition with minor scuffs from prior use.
$4.47 Shipping Condition: Used Location: Santa Ana, United States Questions? Call us: 1-877-328-9236. Vexta RKD514L-A 5-Phase Driver Microstep Control Controller. Manufacturer: Vexta Model: RKD514L-A Condition: Used ... morePrice: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Vexta Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: This item was not fully tested. Since we do not have the proper resources. Upon power up, the POWER and TIM. green LED's turned on. No further testing was done. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Vexta RKD514L-A Driver, 1) Molex CN1 connector, Specifications: Manufacturer: Vexta, Model: RKD514L-A, 5-phase driver, 100-115VAC. 4.5A, Single phase. 50/60Hz, SKU: L13L003 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available
Buy It Now
$24.74 Shipping Condition: New – Open box Location: Alviso, United States The manufacturer of the complete system-level electronic product is responsible for complying with 21 CFR 1040.10 and 1040.11 and for providing the user ... morewith all necessary safety warnings and information.
Buy It Now
Free Shipping Condition: For parts or not working Location: Hammonton, United States This item is described to the best of our ability with any known issues brought forward. No cords nor accessories, power or otherwise, are included in ... morethe sale unless specifically stated.
Buy It Now
$1.95 Shipping Condition: New Location: China 4, can produce pulse signal, can also produce PWM signal, can choose the jumper. PUL=PULS=CLK Pulse. EN=ENA=FREE Enable. We afford all cost if it's our ... morefault. DIR=CW=CWW Direction.
Buy It Now
$18.40 Shipping Condition: Used Location: Fremont, United States
Buy It Now
$37.50 Shipping Condition: Seller refurbished Location: Hawthorne, United States 770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, ... moreOn these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. PARKER COMPUMOTOR ZETA6104 STEPPER MOTOR INDEXER DRIVE CONTROLLER SYSTEM This auction is for one Parker ZETA6104. Compumotor’s ZETA6000 Series products are stand-alone. Single-axis drive/controller systems. The ZETA6000 Series products come in 4 different power versions: ZETA6104, ZETA6104-240, ZETA6108 and ZETA6112. These ZETA6000 products pack all the power and reliability of the 6000 family of controllers and ZETA drives into one convenient package. All of the I/O points, RS-232C/RS485 control, operator interface options, and following capabilities for single-axis applications are included. The following package can perform phase shifts, electronic gearbox, and flying cutoff functionality with ease. The ZETA6000 Series package was made for easy and reliable installation. The connections are on removable screw terminals and a standard 50-pin header allowing simple installation and cable routing without having to cut off and reattach a connector. This unit has the following features: One axis package drive/controller, Damping ratios of up to 0.5, Higher acceleration than conventional step systems, Decrease motor vibration, Increase shaft power, Higher performance, Reduce settling time, Increase slower speed smoothness(reduce velocity ripple) Reduce audible noise, E
Buy It Now
$4.75 Shipping Condition: New Location: Sacramento, United States L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 1/4" Bore, and one half 5/16" bore and the spider is buna N rubber. ... moreThe spider is tight fitting buna n rubber for low viabration transmittion and very low backlash.
Buy It Now
Free Shipping Condition: Used Location: Radford, United States We have multiples of this item. The item shown in the photos may not be the exact one that you receive.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Features: This is pulse module. Can provide 2.5 KHZ-68 KHZ frequency, supply signal to stepper driver. If you want to control the stepper motor, you still ... moremust use a motor driver. If you want to change the frequency range, you can change C46 capacitance. power supply: DC15-80V or DC 12V. motor reversing and the rotation, stop and run can be controller by keys. motor speed can be controlled by adjusting the potentiometer. Package 100% Brand New 1 x Stepper motor Pulse Signal Generator module/driver controller/Speed Regulator
Buy It Now
Free Shipping Condition: Used Location: New Port Richey, United States Includes everything shown in the photos.
Buy It Now
Free Shipping Condition: New Location: China Delivery Details 1.Standard shipping carrier is ePacket with tracking code for United States address.Delivery within 7-14 busienss days. 2.For outside ... moreUS address.Standard shipping carrier is Hong Kong Post without tracking code,delivery within 25-30 business days.We provide a free tracking for order above 45USD.Please contact us if you want to add a tracking code for small orders. 3.Express shipping like DHL.Fedex,UPS,TNT is also avaiable if you are willing to pay extra.DHL is our standard shipping carrier for Expedited shipping,please contact us if you want a different carrier. 4.Customs duties or taxes are buyer's resposibility for all of the listings.Please check with your local customs office if you have any doubts. 5.Please confirm you are putting a correct and complete shipping address here.You are resposible for extra charge if your package been returned because of wrong address. Description The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board. So it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions(down to 1/32-step) It operates from 8.2– 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow(rated for up to 2.2 A per coil with sufficient additional cooling) Features Simple step and direction control interface Six different step resolutions: full-step. Half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step Adjustable current control lets you set the maximum current output with a potentiometer. Which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates 45 V maximum supply voltage Built-in regulator(no external logic voltage supply needed) Can interface directly with 3.3 V and
Buy It Now
$6.05 Shipping Condition: New Location: Windsor, United States PN: 220001 - Hurst Mfg., Controller, Stepper Motor 6-24 VDC (1 Piece Lot).
Buy It Now
$3.74 Shipping Condition: New Location: China It can run independently as a module, or it can be used in conjunction with other systems. Adapted motor: stepper motor. We will not take any such responsibilities. ... moreInput reverse connection protection: Yes.
Buy It Now
$8.20 Shipping Condition: New Location: Atlanta, United States Electric Reset Stepper. 120 VAC 60Hz.
Buy It Now
Free Shipping Condition: Used Location: Malaysia STEPPER DRIVE. 2 PHASE OUTPUT. BIPOLAR (VELOCITY & POSITION MODE). 1X RS-232 (RJ11) PORT. Used: An item that has been used previously. IFS: BOX 11F.
Buy It Now
$15.99 Shipping Condition: Seller refurbished Location: Cleveland, United States ITEM DESCRIPTION 1 REPAIRED CONTROL-O-MATION D6032HA STEPPER CONTROL. PART IS IN STATIC BAG! SEE PHOTOS Q9-5. IMPORTANT* We are unable to test any of ... moreour electrical equipment within our warehouse. PAYMENT INFO: USA BUYERS: Any form of Paypal. with other forms of payment. Please ask us! INTERNATIONAL BUYERS: Paypal is preferred. Though we also accept I M O s in US $ from a US bank. E-mail any questions. We expect payment within 7 calendar days of the close of the auction. SHIPPING INFO: Items typically sent out 2-3 days after payment has been received. Will ship worldwide(Please ask us first if you do not see an exact price for shipping for your country! I will no longer use your account number with Fedex or UPS for any INTERNATIONAL OVERNIGHT SHIPMENTS PLEASE NOTIFY US WITHIN 14 DAYS IF YOU HAVE NOT RECEIVED YOUR ITEM. Full refunds are granted for any D.O.A. product within 7 days of receiving. Shipping costs are based on Shipping Rate. Packaging Material, Gas, and Labor. We DO COMBINE SHIPPING on multiple purchases! Please do not ask us to mark items as"gifts" to avoid tax and/or duty charges. Local Pickup Available QUESTIONS Please feel free to send us any question you may have. We are happy to answer! Special arrangements will be made for bulk orders/ pick-ups. Please ask! BUSINESS HOURS We are normally here between 8:30 A.M. and 3 P.M. Mon-Fri. FEEDBACK Feedback is left for buyers as soon as payment is received. We ask that you leave us 5 star feedback once you get your item(s) in satisfactory condition. If there is any problem. Please notify us before you leave any feedback! We always strive to resolve any issue. Our customers are very important to us! ABOUT US Freightfinders has been in business since 2002. We specialize in Allen Bradley. Cutler Hammer, Square D, Fanuc, Atlas-Copco and other industrial maintenance parts. We also stock Honeywell. Johnson Controls, Fife and many HVAC replacement parts. We have a great selection of hydraulic valves and pumps. Fittings, bearings, etc. Another specia
|
|
|
|
Oriental Motor Vexta Stepper PX245-01AA
This Sale is for a Demo Oriental Motor Vexta 2 Phase Stepper PX245-01AA We require payment within 5 business days. We ship only USPS all Destinations in the world unless prior arangments have been made. Thank you. Buyer is responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Goods typically ship three to five business days after receipt of payment. Please look over the photos carefully and do not assume anything about the item(s) included in this listing. The photos show what is included in this listing. Unless otherwise stated. If it is not in the photos or in the description it is likely not included. The pictures in this listing are from our stock photos. The item being sold is the same as pictured here. But may not be the specific item in this photo. We strongly encourage buyers ... moreto do their own research before buying. Please. It is very IMPORTANT that you know exactly what you are buying before you commit to the purchase. If you have any questions. PLEASE email us and ask before you make your purchase and we will do our best to answer your questions to the best of our abilities. This item is new(unless stated otherwise) and offered in as is condition. No Guarantee or Warranty is offered or implied. This listing is offered with a 7- Day retu rn privilege. If this unit does not live up to the expectations of the offering. Or is DOA, you may return this item at your expense, unless it was our mistake. Your funds for the purchase will be refunded. You must contact us by the 7th day to arrange for a return authorization and shipping instructions. Otherwise you may not be allowed a return or given a refund. In most cases. All items are required to be returned and shipping cost paid by the buyer unless other arrangements are made between the seller and buyer. The item must be received back to us in the same condition as it was shipped(unless there is a damage claim) before a refund will be given. PLEASE NOTE: All orders must be packaged carefully as you
|
|
|
Stepper Motor Lot 3 - M061, 1 - M063 with API-DELTRAN BRP-17K,2- Photoelectric
Used Condition.Not Tested. 2- Pepperl+Fuchs OBS2000-F28-E4- Photoelectric Sensor 1- SUPERIOR ELECTRIC SLO-Syn Synchronized/ Stepping Motor M063-CE06 with API-DELTRAN BRP-17K 240VDC. 2- SUPERIOR ELECTRIC SLO-Syn Synchronized/ Stepping Motor M061-LE08 1- SUPERIOR ELECTRIC SLO-Syn Synchronized/ Stepping Motor M061-CE-514
|
|
|
STEPPER MOTOR POSITIONER MOTION DC SIGMA INSTRUMENTS OPTICAL NEW
STEPPER MOTOR POSITIONER MOTION DC SIGMA INSTRUMENTS OPTICAL NEW Sold as is. Thanks. TERMS OF USE Welcome to our SILO Ebay store. Please. Review our terms and conditions, which has the purpose to clarify and help for a better business relationship with our costumers. If you do not agree with any part of our company policies, please do not do any bidding in our items. IF YOU PLACE A BID IN OUR ITEMS We’ll consider that you have agreed to all the following Term of Use. ITEM CONDITIONS: Please. Make a thoroughly inspection of the photos, description and conditions of each item you are interested, before placing your biding. SILO attempts to be as accurate as possible. However. SILO does not warrant that product descriptions or other content is accurate, complete, reliable, current, or error-free. If a product offered in our store is not as described, ... moreyour sole remedy is to return it in unused condition. DISCLAIMER: Many of our items are previously USED products or REFURSBISHED. Therefore they are sold“with all faults” or“AS IS” unless otherwise specify in writing. The condition of the item is provided in the“ description” RETURN POLICY: Our goal is to provide our customer with the best option for their needs. If you need to return item this rules will apply: We offer the buyer a two weeks(14 days) right to return the item. The buyer will be responsible for the cost of packing and shipping the item. Items MUST BE returned for any Refund. We do not offer partial refunds. Refunds will be given as money back. WARRANTIES OR RETURNS: NO WARRANTIES ARE EXPRESS OR IMPLIED. Items that are supposed to be operational according to the description in the listing can be returned if they are D.O.D. Items that are untested or are sold‘AS IS’ can not be returned. DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY: All ITEMS OR PRODUCTS LISTED IN OUR EBAY STORE ARE PROVIDED BY SILO ON AN"AS IS" AND"AS AVAILABLE" BASIS. UNLESS OTHERWISE SPECIFIED IN WRITING. OUR SILO STORE MAKES NO REPRESENTATIONS OR WARRANTIES O
|
|
|
OKI KBL42LCB740C C5450 Stepper Motor 7.5DEG/Step 2.6VDC
Is our price competitive? Please feel free to make an offer on any of our listings. If you've seen a better price. If you would like us to pricematch. Please include the link to the cheaper price at the same time as the offer. OKI KBL42LCB740C C5450 Stepper Motor 7.5DEG/Step 2.6VDC USED OKI KBL42LCB740C C5400 C5450 STEPPER MOTOR 7.5DEG/STEP 2.6VDC Refurbished, What do the different conditions mean? New- Item is brand new in sealed box/packaging. New Other- Item is brand new. But may not be sealed and/or boxed. Seller Refurbished- Used item has been stripped down(where possible) Cleaned, inspected, reassembled(where possible) and tested as working. Please note: We do not reflow. Resolder, or repair any of our parts unless explicitly stated within the description Information: We're open from 9:30am to 5:30pm Monday-Friday. Speak to ... moreus on 01985 851515 Skype IM Sparespeople All items carry a 30 day warranty. We security mark all of our items to protect ourselves from fraudulent returns- Thinking about it. Our standard rate delivery is Royal Mail Tracked 48. Express delivery is by Parcelforce24- Parcelforce collect our parcels at 1pm every day. Cutoff for same day dispatch is 12pm midday. Overseas orders are sent by registered Airmail. All items are sent out in anti-static material where necessary, and packaged properly to survive the journey. Where possible we try to use recyclable materials to avoid landfill, this includes void-fill material. To ensure rapid processing of returns please follow the guidelines below: If unwanted/unsuitable please send us a message. However. We charge a 15% restocking fee for unwanted/unsuitable returns from businesses. If faulty; firstly get in touch via eBay messaging system for RMA before sending anything back to us. Please print the return documentation we send you and include it in your returned package. Please take your time to fill in as much information as is practical to assist with processing your RMA. Please return the item in antistatic pack
|
|
|
PARKER COMPUMOTOR ZETA6104 STEPPER MOTOR INDEXER DRIVE CONTROLLER SYSTEM
770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, On these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. PARKER COMPUMOTOR ZETA6104 STEPPER MOTOR INDEXER DRIVE CONTROLLER SYSTEM This auction is for one ... moreParker ZETA6104. Compumotor’s ZETA6000 Series products are stand-alone. Single-axis drive/controller systems. The ZETA6000 Series products come in 4 different power versions: ZETA6104, ZETA6104-240, ZETA6108 and ZETA6112. These ZETA6000 products pack all the power and reliability of the 6000 family of controllers and ZETA drives into one convenient package. All of the I/O points, RS-232C/RS485 control, operator interface options, and following capabilities for single-axis applications are included. The following package can perform phase shifts, electronic gearbox, and flying cutoff functionality with ease. The ZETA6000 Series package was made for easy and reliable installation. The connections are on removable screw terminals and a standard 50-pin header allowing simple installation and cable routing without having to cut off and reattach a connector. This unit has the following features: One axis package drive/controller, Damping ratios of up to 0.5, Higher acceleration than conventional step systems, Decrease motor vibration, Increase shaft power, Higher performance, Reduce settling time, Increase slower speed smoothness(reduce velocity ripple) Reduce audible noise, E
|
|
|
Oriental Motors Vexta ASM66AA Stepper Motor, DC 3.79V 2.4A
This item is an Oriental Motors Vexta Model ASM66AA Stepper Motor pulled from a working plant. This item has not been tested.
|
|
|
Cetronic Ltd HY200-2220-0100-ARM8 84V/1.0A Stepper Motor AISS w/ Cable
Questions? Call us: 1-877-328-9236. Cetronic Ltd HY200-2220-0100-ARM8 84V/1.0A Stepper Motor AISS w/ Cable. Manufacturer: Cetronic Ltd Model: HY200-2220-0100-ARM8 Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Cetronic Ltd Condition: Used. Comes in non-original packaging. There are scratches on the outer assembly from previous usage. The stepping motor and cables are in good condition. Notes: The stepping motor and cable were pulled from a working environment. No further testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Cetronic Ltd HY200-2220-0100-ARM8 Stepper Motor, 1) Cable. 6-pin, Specifications: Manufacturer: Cetronic, Model: HY200-2220-0100-ARM8, Size 23 step motor, Holding Torque up to 1425 Ncm, 84 Vmax, 1.0A/ph, SKU: ... moreN24N016 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment mu
|
|
|
1952 Buick Roadmaster Car This Stepper's A Stopper Ad
This is an original magazine ad. It measures 10 1/4 x 14. The ad has light edge wear on the top and a crease of the lower right corner. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
AB CompactLogix AMCI 3601 1 axis stepper motor controller
You are buying one Advanced Micro Controls Inc. 1- axis stepper motor controller model no. 3601 for Allen Bradley MicroLogix PLC. Posted with
|
|
|
Rexroth-Indramat Stepper Magnet Motor Servo Driver Milling Machine CNC Router
We have for sale a Rexroth-Indramat Stepper Magnet Motor Servo Driver sold as"Parts-Only" This is a nice Stepper Motor Servo Driver that was used on a roller arm step milling machine. It is a Permanent Magnet Motor that was removed from a working environment but will be sold AS-IS. Sold as parts of a CNC unit to be attached to a roller arm with no expressed warranty. Please e-mail if you were to have any questions.Thank you and have a great day. Also. Click the photos desired, to enlarge the item for a closer view. 956 RA) This auction comes with what is in the pictured or listed in the description. All cables. Parts, accessories, etc. are not included unless pictured or described. Please Note: This sale is for USA. ONLY! NO International sales or shipments. Thank you. Also. We have parted it out, more pieces available on the Labedge ... moreStore: Thanks again.
|
|
|
Anaheim Automation Stepper Drive DPD72002
Anaheim automation stepper motor drive. Unit was pulled from working equipment taken out of service. Posted with
|
|
|
Parker Compumotor CT32-39 Stepper Motor Drive
We offer for bid a Parker Compumotor Stepper Motor Drive. Specifications: 0 to 1A output current, +12 to +24V operation, operates miniature motor sizes 10 through 17, Part number: CT32-39 Condition: Item is USED and in good condition. We have several in stock that are in similar condition. However, if you decide to purchase one, you may not get the exact one seen in the photos. Shipping Information Shipping weight is 3 pound(s) Shipped from Los Angeles area. zip code 90221) Default shipping via. UPS Ground using eBay's shipping calculator. Shipping to Alaska. Hawaii, or other US territories via. Priority Mail using eBay's shipping calculator. California residents must include 9.75% sales tax in your payment. Tennessee residents must include 9% sales tax in your payment. We now have offices in both California and Tennessee. For shipments ... moreoutside of the US we use USPS Priority Mail International via. eBay's shipping calculator. FOREIGN BUYERS ATTENTION We will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when the shipment enters your country. YOU are responsible for those duties/taxes; know your own country's rates/policies before you buy. Due to the various levels of service and care provided by the different postal services around the world. We cannot guarantee delivery outside the United States. Insurance is strongly suggested or may be required. If the item is returned/rejected from your country for any reason. We are happy to refund the cost of the item only, less any eBay fees and shipping costs. If you still want the item, we are willing to try and re-ship; this will require you to pay the applicable shipping costs again. Negative feedback can not be left on Foreign shipments due to non-delivery. Buying the item confirms that you have read. Understand and agree to be bound by our terms for a foreign sale, and that
|
|
|
Anaheim Automation DPT10001 High Performance Stepper Motor Driver
Anaheim Automation DPT10001 High Performance Stepper Motor Driver Anaheim Automation DPT10001 High Performance Step Motor Driver Condition: Excellent cosmetic condition with little or no sign of previous use. Tested: Unit was removed from a working environment Warranty: 14-Day Right-of-Return SKU: 389711 Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be relisted at our discretion. PAYMENT INFORMATION: Payments are ... moreexpected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 8.75% Sales tax applies to CALIFORNIA residents unless a resale tax ID is provided for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. If you would like to pay using a credit card. Please call us at(408) 743-5609. Resellers Click Here* WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have fourteen(14) days to contact us for a replacement or refund. We can not warranty compatibility with your equipment. Or warranty items that have been installed in your computer and/or altered once they have left our warehouse. We maintain the right to use our descretion when choosing between a replacement o
|
|
|
API Controls M231-02 Stepper Motor
API Controls M231-02 Stepper Motor Description API Controls M231-02 Stepper Motor Please email me with any questions. Be sure to Check out my! I will gladly combine shipping. Also. Here is a link if you would like to add me to your! Thanks for looking and happy bidding. Return Policy is as follows; Buyer must contact us immediately"within the 14 day return period" to receive a refund. Item(s) must be returned in original packaging& original condition; item(s) must be shipped back& received by us before the refund will be issued. Shipping Shipping must be paid in advance. We ship Internationally USPS Only. Contact us in advance for International costs. All customs fees. Value fees and taxes are the sole responsibility of the buyer. Your item(s) within 3 days of purchase. We will send you an e-mail with your tracking number ... moreas soon as we have shipped your item(s) Please refer to your e-mail to track your package. Feedback is a system within eBay to help buyers and sellers alike. We encourage Feedback& Detailed Sellers Ratings. This is what helps us to provide and maintain the quality of service and level of commitment to our valued customers. Please take time and leave Feedback and Detailed Sellers Ratings. Thank you for looking
|
|
|
1950's AMI 80 Play Stepper for Jukebox / Wallbox MODEL S-80
This listing is for a 1950's AMI 80 play stepper for a jukebox/ wallbox. Model S-80 serial#50582. I have no way to test it and it is being sold as is, though it is in good original unmolested condition. If you have any questions. Call Lloyd at 703-801-1459 or email me. Become a fan of Coinopwarehouse and visit our FACEBOOK page to see our inventory as it arrives! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13f8769c3fc-0xf6-
|
|
|
Wurlitzer Radio Impulse Transmitter 215, Receiver 216 and Stepper 219
Up for sale this amazing Wurlitzer transmitter. Receiver& stepper. For the picky Wurlitzer collector. These sets are not often coming up for sale. Untested and unrestored. In very nice original condition as you can see in my pictures. Please don't hesitate to ask your questions or when you need any additional pictures. No extra fee for packing& handling. Happy bidding.
|
|
|
Oriental Motors ASD18A-K Alpha Step Drive Closed Loop Stepper System
Questions? Call us: 1-877-328-9236. Oriental Motors ASD18A-K Alpha Step Drive Closed Loop Stepper System. Manufacturer: Oriental Motor Model: ASD18A-K Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Oriental Motor Condition: Used. Comes in non-original packaging. The step drive is in good condition. Notes: No testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Oriental Motors ASD18A-K Step Drive, Specifications: Manufacturer: Oriental Motors, Model: ASD18A-K, Closed loop system, Stepper drive, 24VDC. 1.7A, SKU: M37N023 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals ... moreis an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available for buyers and their direct employees. Warranty. This item is guaranteed to be as described. The buyer must notify us within 14 days
|
|
|
PARKER COMPUMOTOR CP*AR-23-2-2-C-1-1 STEPPER MOTOR & CABLE
PARKER COMPUMOTOR CP*AR-23-2-2-C-1-1 STEPPER MOTOR& CABLE Description: Thank you for your interest! We are auctioning off this PARKER COMPUMOTOR CP*AR-23-2-2-C-1-1 STEPPER MOTOR& CABLE. Acquired from government surplus. As you know with most government agencies. When a new grant comes in, they have to justify the grant by buying new equipment leaving very useful equipment for surplus. Auction is for one unit. With the right to buy additional units for the same price. EBAY requires a condition code now on auctions.However there isnt one to exactly fit this auction. IT will probably work, but sold as is since we cannot test! We acquire 1000's of items each year from surplus and 99% work for our customers, but since we cant test it all items are sold as is. I chose"used" since it will most likely work, but didnt want to ... morechoose parts unit/non working since I dont know its exact condition 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3.We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals.NO STANDARD POWER CORDS, accessories, software etc are included unless pictured and noted in the description. 6. It is the bidder's responsibility to understand that the terms of the auction. The nature of equipment offered and bid accordingly. Shipping: BUYER TO PAY SHIPPING IN THE US. Alaska& Hawaii will be more! INTERNATIONAL BIDDERS WELCOMED-PLEASE CONTACT US FOR ACCURATE S
|
|
|
AB ALLEN BRADLEY SLC500 POWER SUPPLY w/5/03 CPU; 2 INPUT; 2 OUTPUT; STEPPER MODS
TAG# 8941 AB ALLEN BRADLEY SLC500 POWER SUPPLY 1746-P2 w/ 5/03 CPU PROCESSOR UNIT 1747-L532. SER. D, REV. 4(NO KEY) 2) 1746-IB16, SER. C INPUT MODULES; 2) 1746-OB16, SER. D OUTPUT MODULES; 1746-HSTP1, SER. E STEPPER CONTROLE MODULE; 1746-17 7-SLOT RACK- USED- NOT TESTED*THERE WILL BE AN ADDITIONAL $3.00 HANDLING FEE* PLEASE WAIT FOR OUR INVOICE BEFORE SENDING PAYMENT FOR ACCURATE SHIPPING CHARGES* SHIPPING FROM ZIP CODE 46901. USA. INDIANA RESIDENCE PLEASE ADD 7% SALES TAX UNLESS YOU HAVE A VALID INDIANA TAX NUMBER. BUYER IS RESPONSIBLE FOR ARRANGING SHIPPING FOR ITEMS WEIGHING OVER 120# INTERNATIONAL CUSTOMERS ARE RESPONSIBLE FOR ANY AND ALL DUTIES, TAXES AND FEES THAT MAY BE APPLIED TO THEIR PACKAGES THROUGH CUSTOMS. WE DO NOT MISREPRESENT OUR ITEMS ON CUSTOM FORMS* PLEASE NOTIFY US IF WE WILL BE SHIPPING TO A COMPANY OR A RESIDENCE. IF ... moreYOU NEED ANY ADDITIONAL INFORMATION, PLEASE CALL US AT 765-454-5833 THANK YOU AND GOOD LUCK: MERVIS EQUIPMENT/ELECTRONICS EQUIPMENT EXCHANGE*THANK YOU Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1991 Barbie Star Stepper Horse With Hair Mane & Tail & Blue Saddle 10"X10"
1991 Barbie Star Stepper Horse With Hair Mane& Tail. 10" X 10" Perfect size for Barbie Dolls. Very good condition- from a smoke free and pet free home. Wrapped in bubble wrap and mailed in a box. Tracking number will be provided via email. I accept credit cards.Debit cards and e-checks through PayPal. Feedback is appreciated! ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13f887efdc1-0xf7-
|
|
|
Pittman-Ametek GM9232C513-R7 Stepper/Stepping DC Motor 38.2VDC 11.5:1 Ratio
Questions? Call us: 1-877-328-9236. Pittman-Ametek GM9232C513-R7 Stepper/Stepping DC Motor 38.2VDC 11.5:1 Ratio. Manufacturer: Pittman Model: GM9232C513-R7 Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Pittman Condition: Used. Comes in non-original packaging. This stepper motor is in good condition with a few very minor scuffs and scratches from normal use. But nothing major or anything that would affect function. Notes: This stepper motor was pulled from a working setup that was being decommissioned. But was not tested separately after removal. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Pittman-Ametek GM9232C513-R7 Stepper/Stepping DC Motor, Specifications: Manufacturer: Pittman-Ametek, Model: GM9232C513-R7, Description: DC Stepper Motor, ... moreInput Voltage: 38.2 Volts D/C, Step Ratio: 11.5:1, Weight: 0.95 lbs. Condition: Used, Quantity: 1, SKU: N24P023 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing t
|
|
|
(6) Ametek Pittman Motor, GM9236E700-R1, 24VDC, 238-9715, 6-15vDC, Stepper Motor
6) Ametek Pittman Motor. GM9236E700-R1, 24VDC, 238-9715, 6-15vDC, Stepper Motor Product Description PLEASE READ CAREFULLY! Up for bid in this auction is a Lot of(6)Ametek Pittman Motor. GM9236E700-R1, 24VDC, 238-9715, 6-15vDC, Stepper Motors. There are 6 of these motors in total. The main motor is a 24vDC and there is a smaller motor attached that has a power rating between 6-15vDC. 5 of these motors look new however I can not guarantee this. These motors are in excellent physical condition but they are not tested. Please refer to the photos for more info and feel free to e-mail us with any questions. Thank you for looking and please bid accordingly. Sunnking's definition of'Unknown Working condition" Item cannot be powered up or tested due to power requirements, lack of equipment to test, or specific technical knowledge. This ... moredoes not mean the unit(s) is dead, it might be dead, it might work perfectly or partially- we do not know. If you buy, pay for and receive an item described as unknown working condition and it does not work, we will not issue an RMA number for return. INTERNATIONAL BIDDERS. Shipping outside of the United States is expensive with UPS(our exclusive carrier) We do not use USPS under any circumstances. International bidders please be aware that UPS charges COD brokerage fees as well as import taxes and possible other fees based on the final value of the eBay item being imported. Charges vary from Country to Country and sometimes Provence to Provence so we are unable to estimate these fees ahead of time. These charges are the buyer’s responsibility and are not covered under the stated shipping and handling charge. Please contact UPS for more information about brokerage fees. Click an Image to Enlarge If you think this is a HOT DEAL check out Sunnking's other items up for auction. Click. To add Sunnking to your favorite sellers list. Click. UPS Shipping Information Boxed Weight: 13 lbs. Sunnking ships exclusively with UPS and due to company policy we do not ship on other UPS acco
|
|
|
Lot of 4 Minebea/Astrosyn DC stepper motors. Model Number 17PM-K304-05V
Used stepper motors. Good for hobby projects. Tested and verified as working. Posted with
|
|
|
Oriental Motor Co. VEXTA UDX5114N 5 Phase Stepper Motor Driver, TESTED! WORKING!
For sale is an ORIENTAL MOTOR Co. SUPER VEXTA 5 phase stepper motor driver. Model UDX5114N with a 1.4 Amp per phase output rating in very good used cosmetic condition. The input rating is 100/115VAC. I have motion tested this driver with Mach3 CNC software to insure that the driver electronics is working and that it moves a motor correctly both forward and backward in 1P mode. I did not test any of the other functions of the unit. Please do your own due diligence to insure that this item is appropriate for your needs. The picture is typical of the units being sold. Thanks for looking!
|
|
|
OFFER & WIN BERGER LAHR VRDM 397/50 LWC STEPPER MOTOR WITH ENCODER
OFFER& WIN WE GUARANTEE THE LOWEST PRICES If You Find This Item At Lower Prices Than Ours, We Promise To Sell It Cheaper Than That Which You Have Found. ITEM FOR SALE: BERGER LAHR VRDM 397/50 LWC STEPPER MOTOR WITH ENCODER USED Normal 0 21 false false false PL X-NONE X-NONE MicrosoftInternetExplorer4 You have 7 days booting warranty from time you receive the device to check if it is fully functional. PLEASE DO NOT ASK US TO LOW-DOWN THE VALUE OF THE INVOICE. IT IS AGAINST OUR POLICY. IMPORTANT! PLEASE OPEN PACKAGE IN THE PRESENCE OF THE CARRIER/TRANSPORTER TO MAKE SURE THAT THE ITEM IS OK AND IS NOT CRUSHED. OTHER WAY WE WILL NOT PAY FOR ANY DAMAGES. If the device does not work please inform us about it. There is always a positive way of finishing the transaction before you leave a negative or neutral feedback. Please be assured that ... morewhen You buy more than one item they might not look the same as the one in the picture SHIPMENT All items will be shipped by UPS courier. Costs: Items to North America will be shipped by registered priority airmail: 110 $ Customers from Europe(all countries) South and Middle America, Asia, Africa, Australia and Oceania: Please send me Your zip code so I could tell You the price of the shipment. If you have any questions. Please write or call. Contact with me: Mobile: +48 880 858 387 Phone: +48 15 842 36 35 Fax: +48 15 642 76 98 E-mail: mt.agat@gmail.com
|
|
|
VEXTA PK266-02A STEPPER MOTOR 2-PHASE 1.8 DEGREE STEP
YOU ARE BUYING ONE VEXTA PK266-02A STEPPER MOTOR 2-PHASE 1.8 DEGREE STEP. ORIENTAL MOTOR COMPANY. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156, OR HIT ASK THE SELLER A QUESTION. G2X1+G4WSEBOXx6=7TOTAL) Estimated Retail Price: $79.00 International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior.
|
|
|
VEXTA EM569H-NA STEPPER MOTOR, 5-PHASE, 0.72° STEP
YOU ARE BUYING ONE VEXTA EM569H-NA STEPPER MOTOR. 5-PHASE, 0.72° STEP. DC 2.8 AMP/ 0.46 OHMS/ SW8 00434, ORIENTAL MOTOR COMPANY. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156, OR HIT ASK THE SELLER A QUESTION. G2BEHINDDOOR) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior.
|
|
|
Novellus Stepper Interface Gamma 2130 PCB Circuit Board Module 03-168306-00
Search our eBay Store! Novellus Stepper Interface Gamma 2130 PCB Circuit Board Module 03-168306-00 SKU: JV-BIN-C-STEPPERGAMMA Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Novellus Systems Stepper Interface Gamma 2130 PCB Circuit Board Module 03-168306-00 Assy P/N: 03-168306-00 Rev.B. Physical Condition: Good- Scuffs/scratches on the board. Connection ports are in good condition. Component and soldering sides are in good condition. Functionality/Degree of Testing: We do not have the necessary resources to test this unit. Dimensions(L" W" H" 7 ½* 8* 1. PLEASE NOTE. ... moreTHE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire mo
|
|
|
Aerotech ATS-302M Linear Positioning Stage 2” Movement w/ Stepper Motor
This sale is for an Aerotech ATS-302M Linear Positioning Stage 2” Movement with Stepper Motor. Lab Notes: Stepper Motor has a manual positioning knob for non-electrical use. SOLD WITH A 14 DAY RIGHT OF INSPECTION! Please CLICK HERE for our new eBay Manuals Store. First Choice Manuals" INTERNATIONAL BIDDERS SHIPPING COST NOTICE: Please request a shipping quote directly from us. EBay's shipping calculator may be quoting incorrect rates. Please email us for a discounted shipping quote prior to bidding on an item. Our office hours are 9-5 M-F Eastern Standard Time. US. Terms& Conditions Emails Please use Ebay’s Message System to communicate with us. Ebay’s message center provides for the most effective communication. Emails sent directly can be overlooked or filtered by our server which only causes frustration to all parties. Answering ... moreQuestions Avitar’s business hours are Monday through Friday from 9:00 a.m. 5:00 p.m. Eastern Standard time. We will answer questions during those hours prior to the end of the auctions. Questions received over the weekend or on holidays will be answered Monday morning. Shipping Notes Shipping costs are to the US(Lower 48 States) Local pick-up is available by appointment only. Alaska and Hawaii residents please e-mail for a shipping quote before bidding. Shipping& Handling All items are professionally packed to arrive undamaged. UPS is our standard domestic carrier. International bidders please note that we will use USPS Priority mail for smaller. Less expensive items. However. USPS has both size and weight restrictions as well as insurance limits that vary from country to country. Any item that exceeds the aforementioned parameters will be shipped via Federal Express. We will pass along our substantial Federal Express discount and are happy to quote shipping cost to potential bidders prior to bidding. Please be aware that USPS takes longer than other carriers. We DO NOT ship to Egypt. Libya, Indonesia, Pakistan, Russian Federation, Yemen. Argentina, Brazil, or Venezuel
|
|
|
AMI Service Manual for 40 Selection Wallbox and Stepper
Please note that this manual is a reprint not an original. Manual is in good condition. All pages appear to be present. This item is free US Shipping. If you have any questions. Call Lloyd at 703-801-1459 or email me. Become a fan of Coinopwarehouse and visit our FACEBOOK page!
|
|
|
1961 Rockola 1745 Stepper for a 1493 Princess jukebox as found
This listing is for a Rockola 1745 stepper to use a wallbox on a 1493 Princess jukebox. I have no way to test it and it is being sold as is. Though it is in good original unmolested condition. If you have any questions. Call Lloyd at 703-801-1459 or email me. Become a fan of Coinopwarehouse and visit our FACEBOOK page to see our inventory as it arrives!
|
|
|
3G stepper bike (junior)
This Junior 3G stepper bike is a great way for kids to stay in shape and have fun too. My son got it for his birthday last november. He has grown so much that he out grew it and is bummed to give it up for a bigger bike. The color is called Spyder which has green/silver stickers added from manufacturer, works great, almost new!
|
|
|
Digiplan HD-130 stepping motor driver - stepper driver
Step it up! You're bidding on a Digiplan HD-130 stepper motor driver. This unit is used but in pretty good cosmetic shape(just a little dusty) We don't have the ability to test it. So take a look at the pictures for the condition. Offers are welcome. Please note that the shipping price is for domestic orders only- international shipping is only available in countries that are part of eBay's global shipping program and the cost may be much more. Feel free to contact us with any questions via ebay. By giving us a call during business hours at 651.646.8653, or by visiting our St. Paul store! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13f8c69fb98-0xed-
|
|
|
Used Kysan Nema 17 Stepper Motor Rep Rap 3D Printer Parts Prusa Mendel RepRap
Used Very Good Condition Kysan 1124090 NEMA 17 Stepper Motor Buyer will receive item as pictured Buy it Now from a trusted seller Thanks For Looking We combine shipping. Please visit our ebay store to make your purchase ABOUT US Our Company was established in 2005 with the goal of providing high quality and extremely affordable merchandise to you our customer. We sell in wholesale lots and individual retail items. We will buy. Sell or trade just about anything of value. With a 10,000 square foot facility to receive, market and ship products in a timely and professional manner, we hope you will find a very positive experience with us and return again and again for more great deals. PAYMENT We currently accept payment via PayPal. Payment should be made within 3 business days of the close of the auction. A confirmed address is required. RETURNS ... moreUnless stated that the product is being sold"As Is" in the listing. We accept returns within 14 days of reciept of your item. Any return shipping cost is the responsibility of the customer. Should you wish to return an item, please contact us, and we will issue you a Return Authorization number. INSURANCE Some items we sell that is of high value. Insurance is required and maybe included in the listing. Less expensive items, Insurance will be left up to the buyer as an option at checkout. PACKAGE TRACKING All packages are shipped via US Postal Service or UPS. When the label is printed. PayPal will send you an email with the delivery confirmation and/or tracking number. COMBINED SHIPPING We are happy to provide combined shipping on items purchased. The combined shipping cost is determined by the entire weight of the purchase. To ensure accuracy to this policy. Please wait for a combined invoice from us before completing checkout. note. The combined shipping has a 3 day time limit, any shopping that falls out of this period will be invoiced and shipped seperately) LOCATIONS We Currently ship Worldwide via USPS and UPS. Powered by The free listing tool. List your items
|
|
|
COMPUMOTOR S57-83-MO CMCPM STEPPER MOTOR S57-83-MO AND ENCODER PARTS OR REPAIR
COMPUMOTOR S57-83-MO CMCPM STEPPER MOTOR S57-83-MO AND ENCODER ENCODER DAMAGED NO P/N ITEM FOR PARTS OR REPAIR ONLY MCID 54094 HI.AK,PR subject to surcharge 06/13 Check out my! Any Questions Call or email or Stop In We accept Paypal and Wire Transfers Have a Blessed Day! Paul Open Monday- Friday 8-5 Paul Sullivan METRO CAD. INC. 2277 49th Avenue North Minneapolis. Minnesota 55430 USA 612-302-8056 612-302-7672 fax Used Equipment Sales New Equipment Sales KILOTECH Scales EZ Maintenance PM& Calibration Software Job Master Manufacturing Software Rigging. Moving, Storage and Archival Sold"as is. Where is" Cost for Packaging and shipping are the buyers responsibility. Shipping Please call or Email S&H and Crating Fees will apply Additional fees for outside the US shipment. Notice: Some items offered for sale are restricted from ... moreshipment to an ultimate destination outside of the United States. By U.S. Law. All sales of these"Restricted Technology" items are intended for ultimate destination only within the U.S. and it is the sole responsibility of the buyer to obtain proper licenses, where required, and if allowed, by U.S. law. Warranties While descriptions are believed to be accurate. The sellers make no warranties or guarantees, expressed or implied, as to the genuineness, authenticity of, or defect of any item(s) being sold and will not be held responsible for any advertising discrepancies or inaccuracies, including without limitation any pictures, descriptions or other information relating to the assets as contained on the website metro-cad or other communications electronic or otherwise. All items are sold on an"AS-IS" WHERE IS" AND"WITH ALL FAULTS" basis. THE SELLER MAKES NO WARRANTIES OF ANY KIND. EXPRESS OR IMPLIED AS TO THE NATURE, QUALITY, and VALUE OR CONDITION OF THE GOODS OR ITS SUITABILITY FOR ANY USE. SELLER EXPRESSLY AND SPECIFICALLY DISCLAIMS WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BUYER AGREES THAT THE
|
|
|
Applied Motions STAC6-S-110 5000-111 Two-phase Stepper Drive
cable computers AC Adapters servers networking electronics printers in titles& descriptions Click on thumbnails to enlarge images Item# STAC6-S-110. Manufacturer: Applied Motions. Availability: Available while supplies last! Applied Motions STAC6-S-110 5000-111 Two-phase Stepper Drive* Condition: Used. Pulled From Working Environments* Manufacturer: Applied Motions* Part Number: 5000-111* Model Number: STAC6-S-110* Sales Includes: Applied Motions STAC6-S-110 5000-111 Two-phase Stepper Drive(as pictured) Quantity included: 1* Warranty: 30 Day Warranty- Guaranteed to Work! Attention International Customers! We will combine shipping on multiple items to give you the best rate. Please contact us for a revised shipping quote. Attention APO/FPO/DPO Alaska. Hawaii and Puerto Rico Customers! Most of the time we can ship for the same cost as the ... morecontiguous US. But in some cases we may require more postage to cover our real cost. Questions? Feel free to give us a call at(602) 688-5777. Mon- Fri 8AM- 5PM Arizona Time. We are here to help! About Us. Payments. Terms. Returns. Nationwide Surplus is a company dedicated to bringing unique high quality products to the marketplace at low surplus pricing. Nationwide Surplus is starting its 6th year of business in 2012 with a team of employees offering years of surplus experience. Add us to your favorites list and subscribe to our newsletter as new products are introduced everyday. PayPal is the only method of payment accepted through eBay. Call 602-688-5777 for other payment options. FAST SHIPPING is what we are known for. We ship Monday- Saturday, with 99% of all items shipped same day as payment received. We take great care packaging every item to ensure safe shipment to you. We charge a postage fee only to cover our costs of materials and labor. Once your order has been processed and we have received cleared payment, your item will be shipped as soon as possible. Please allow extra time if you are paying by PayPal e-check. COMBINED SHIPPING is offered on most i
|
|
|
Rapidsyn Div American Precision Ind Stepper Motor 42D-111-30C sm8
RAPIDSYN DIVISION AMERICAN PRCISION INDUSTRIES INC STEPPER MOTOR USED Description- Model Number: 42D-111-30C- Unable to test. Comes as pictured. Used These are being sold as individual units(price listed is for single unit) We have a total of 1 of these servo motors available as well as additional servo components& drives if you are interested in purchasing additional units. 30 Day Warranty* This item was removed from service and untested. P lease contact within 30 calendar days after receipt of your item if it is DOA. WE WILL MAKE IT RIGHT! SM8. Zone shd
|
|
|
Applied Motion 3540i Programmable Stepper Motor Drive & Option Board 1000-175A
Payment Policy Brand New Sony CyberShot 8 MP Di Applied Motion 3540i Programmable Stepper Motor Drive& Option Board 1000-175A Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Applied Motion 3540i Programmable Stepper Motor Drive& Option Board 1000-175A Used Condition Applied Motion Programmable Microstepping Stepper Motor Drive/ Indexer Board. Model 3540i With Option Board. Model 1000-175A Voltage: 12-42 VDC. 0.21-3.5 Amp Inventory Number: 3F80803-06-13 Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that ... moreyou receive may vary from the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Shipping Method: Our standard carrier i
|
|
|
ZEBOTRONICS STEPPING MOTOR,STEPPER, CNC, NEMA 34 ( Lot of 2 used)
You are bidding on( 2) USED AND WORKING. FULLY TESTED, GOOD CONDITION ZEBOTRONICS STEPPING MOTORS MODEL SM 86.3.18.J6 1.8 DEGREES +/ 3% STEP ACCURACY HIGH BEARING THRUSTS AND OVERHEATING LOADS DETENT TORQUE 5.0 Ncm OPERATING TEMPERATURE-30 C TO 100 DEGREES C HOLDING TORQUE 350 Ncm UNIPOLAR PHASE CURRENT 3.5 AMPS BIPOLOR PHASE CURRENT 8.4 AMPS RESISTANCE OHMS 0.41 THE ONLY DIFFERENCE IS THE SECOND TO LAST LETTER CODE OF THE MOTOR J= ENGLISH M= METRIC DATA SHEETS INCLUDED A MUST HAVE FOR CONTROL PANELS AND MOTION CONTROL. USA SALES ONLY. SOLD AS IS! SERIOUS BIDDERS ONLY PLEASE. PAYMENT MUST BE RECEIVED WITHIN 3 DAYS OF AUCTION END OR THE ITEM WILL BE RELISTED AND APPROPRIATE FEEDBACK WILL BE LEFT FEEDBACK POLICY: I want to leave positive feedback for all of our customers. If you have an issue with the transaction. Please email me BEFORE LEAVING ... moreANY NEGATIVE OR NEUTRAL FEEDBACK. I will try to solve the problem to make you happy, but you have to email us and give us a chance!
|
|
|
CNC Router Robotic Roller Arm Indramat Stepper Motor Milling Machine "PARTS"
We have for sale a Deutache Star GmbH CNC Router Robotic Roller Arm Section with a Indramat Stepper Motor 24V DC and some Cables. Sold as"Parts-Only" This is a nice section that is(34" long x 17.5" x 4.5" wide) with the stepper motor attached and(29" x 3 1/8"w x 4"h) on the bottom roller arm section. It also comes with some cables(that are attached) Stepper motor is a 24V DC. +/10% break@ 3.0nM and 0.6A. Nice Roller Arm Section with attached Stepper Motor that will be sold AS-IS with no expressed warranty. Please e-mail if you were to have any questions. Please click the photos desired. To enlarge the item for a closer view. Thank you and have a great day. This auction comes with what is in the pictured or listed in the description. All cables. Parts, accessories, etc. are not included unless pictured ... moreor described. Please Note: This sale is for USA. ONLY! NO International sales or shipments. Thank you. Also. We have parted it out, more pieces available on the Labedge Store. Thanks again.
|
|
|
LOT of 5 : Minebea-Matsushita Motors , 23KM-C051-09V 49-207984-000A , stepper
LOT of 5: Minebea-Matsushita Motors 23KM-C051-09V 49-207984-000A about th e se motors. We received th em in a load of electronics surplus. We did not have the equipment to test th ese. Thus they are being sold'As-Is' for parts or repair. PLEASE READ We are an electronics recycling company. Most items we received are used surplus. And we do not have any personal experience with these items. Please understand that most items are power tested only. Unless the ad specifies otherwise. Please bid with the understanding that we have not tested all functions. And do not guarantee every item works 100% as intended. International Buyers Welcome Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine ... morewhat these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charge. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Shipping We ship out on M-W-F. OUR SHIPPING CUTOFF TIME IS 7AM EASTERN. ANY ITEMS PAID AFTER THIS TIME WILL NOT SHIP UNTIL THE FOLLOWING BUSINESS DAY. Your item will be shipped within 1 business days except for emergencies. We ship using UPS Ground for smaller items. Freight Shipping can be arranged for larger items at buyers expense. All items are insured through UPS. Please check"MY EBAY for a tracking number. If you do not receive one in your email. WE DO NOT SHIP WITH THE USPS! Payment and Returns We accept Paypal. Full payment is expected within 7 days of auction close. Unpaid item reminders will be automatically sent after 10 days. Please contact us to make other arrangements. Returns accepted* This is an actual business with business hours. 8-4) eastern. Questions will be answered during this time.
|
|
|
PARKER STEPPER DRIVE PC BOARD 1408.081 #K510
PARKER STEPPER DRIVE PC BOARD 1408.081#K510 OUT OF STORES AT LIQUIDATED COMPANY NO PACKAGING SEE PHOTOS DSKKITCHENS@AOL.COM ANY QUESTIONS GIVE ME A CALL 07860 178131 YOU CAN VIEW BEFORE PURCHASE ANY QUESTIONS PHONE PAUL ON 07860 178131 DSKKITCHENS@AOL.COM 10am to 10pm 7 DAYS
|
|
|
The Motion Group SID 2.0 FHHL Stepper Motor Controller, Motion Control
The Motion Group SID 2.0 FHHL Stepper Motor Controller For sale- an SID 2.0 FHHL Stepper Motor Controller from The Motion Group. Inc. Basically to me this thing is just a black box. But there is plenty of info on it here as well as a manual for it here on The Motion Group website. The website also offers some demo software downloads as well. But what I am selling here is just the black box controller as pictured. It is in excellent physical condition and it powers up as you can see. But is otherwise untested and NO warranty is offered. However. IF you pay the asking price and find it has a problem you cannot live with within 14 days of receipt you may return it. Returns are ONLY allowed on Buy It Now Purchases. Accepted Best Offers are strictly an as is sale. No returns allowed. Return would be for a refund of the purchase price. Not including ... moreshipping costs. Just so that we are clear on that. This is an item that has not been thoroughly tested. As such it may work fine or it may have problems. So any purchase entails a certain degree of risk. If you Buy It Now your risk is limited to the shipping costs both ways. If you submit an offer you do so knowing that you cannot return it. In either case it is up to you to decide whether the risk level is acceptable to you. And if not you need to pass on this particular item. There is one other Motion Group SID piece listed currently. But that is a 0.5 model, which I am guessing has a max current output of half an amp. The unit offered here has a max output of 2 amps. Please check out my for more interesting lab. Test, and motion control equipment. Check back often! Sold as is. As described, as pictured. Potential buyers are asked to please make sure you have read the listing carefully. And understand what you are buying. Ebay’s condition codes for used items. Which I am now required to select from, might imply a degree of functionality that my limited time, knowledge, and facilities do not allow me to ascertain. If the functional condition of the item is known it will b
|
|
|
Kollmorgen Stepping Motor Controller SMC-40, Stepper, Microcomputer chip ss@263
This listing is for a Kollmorgen Stepping Motor Controller model SMC-40. The SMC-40 is a microcomputer chip capable of indexing stepping motors. This advanced controller is fast. Low power and comes in a small package size. Used. Very good condition. NO crystal oscillator required• NO reset circuit required• Self contained non volatile memory• Maximum step rates above 65.000 SPS• Non-volatile memory for stand alone operation• Multiple axis control from a single COM port• Limit and Home inputs• Go and soft stop inputs• Six user ports• Moving/Driver Enable output• Small 28 pin PLCC28 and TSSOP28 surface mount packages sizes If not satisfied for ANY reason. Send back within 60 days for a refund. Please see our other listings, since we combine shipping. Thank you for your interest! Powered by The free listing tool. List your items fast and easy ... moreand manage your active items. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13f918027a6-0x105-
|
|
|
Superior Electric SloSyn Synch stepper motor 200 steps M093-FD-420E 2.27V
Used excellent condition Superior Electric SloSyn Synchronous Stepping Motor model M093-FD-420E. 2.27V, 7A Hold 450 oz in. 200 steps/rev, class B, Spec DC Res per phase.39 ohms max Guaranteed working Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Dell 1700 1700N Stepper Motor
ebay template Thank you for looking at my auction if you have any questions about the item please send me an eBay message. Dell 1700 1700N Stepper Motor. Other Auctions I have going: Dell 1700 1700N Stepper Motor. We will attempt to ship your item within 24 hours after payment has been received Monday- Friday. If you purchase on the weekend I'll do my best to get out first thing Monday. I DO WILL NOT COLLECT ANY PASSWORDS OR CREDIT CARD INFORMATION FROM YOU! THE CHECKOUT PROCESS IS DESIGNED THAT IT COMMUNICATES WITH THE MERCHANT TO CONFIRM THAT PAYMENT HAS MADE AND CLEARED. AT NO TIME IS THE MERCHANT PROVIDING US WITH ANY PASSWORDS OR CREDIT CARD INFORMATION. OTHER METHODS OF PAYMENT ARE OUTLINED THROUGH OUR ONLINE CHECKOUT PROCESS. WINNING BIDDER MUST MAKE PAYMENT ARRANGEMENTS WITHIN 3 DAYS. Powers Your Online Marketplace Make a breeze ... morewith Kyozou Software
|
|
|
NI PXI-7344 4-Axis Mid-Range Stepper/Servo Motion Controller for sale
One board. In excellent condition. The National Instruments PXI-7344 easy-to-use servo/stepper controller is recommended for both simple and complex motion applications. The NI PXI-7344 includes dual processors. A real-time onboard operating system, and multiaxis interpolation. Recommended accessories include the NI MID-76xx motor drive or the NI UMI-7774 interface for third-party motor drives. General Product Name PXI-7344 Product Family Motion Control Form Factor PXI Platform PXI Bus Type PXI Hybrid Compatible Part Number 777935-01 Operating System/Target Real-Time. Windows LabVIEW RT Support Yes Included Motion Software NI Motion I/O Connector 68-pin VHDCI female Motion Hardware Controller Number of Axes 4 Motor/Axis Type brushless servo. Brushed servo, p-command servo, stepper Controller Linear Interpolation Yes Circular Interpolation ... moreYes Spherical Interpolation Yes Helical Interpolation Yes Blending Yes Profile Type Trapezoidal. S-Curve Contouring Yes Electronic Gearing Yes Motion Profile Import from CAD.dfx file Yes On-board programming Yes Brushless Servo Motor Commutation No Position Capture single Breakpoints single Control Loop Rate 1 axis at 62.5 us Number of PWM Channels 2 Number of Digital IO Channels 64 Number of Analog Input Channels 8 Maximum Step Output Rate 4 MHz Maximum Encoder Input Rate 20 MHz Feedback Type analog. Dual encoder, encoder Physical Specifications Length 16 cm Width 10 cm Minimum Operating Temperature 0 °C Maximum Operating Temperature 55 °C
|
|
|
CNC Router Milling Machine Servo Stepper Motor Cables Rexroth-Indramat ABB
We have for sale a set of Rexroth-Indramat Stepper Magnet Motor Servo Driver Milling Machine Cables. It is Roller Arm Stepper Motor cables cut and long. About five in the bundle, that will be sold AS-IS with no expressed warranty. Customer will have to alter cables and connections to there own needs and specifications. Also. Click the photos desired, to enlarge the item for a closer view. Thank you and have a great day. 957 SM) This auction comes with what is in the pictured or listed in the description. All cables. Parts, accessories, etc. are not included unless pictured or described. Please Note: This sale is for USA. ONLY! NO International sales or shipments. Thank you. Also. We have parted it out, more pieces available on the Labedge Store: Thanks again.
|
|
|
Parker stepper A/AX 57-51
Parker stepper A/AX 57-51 motor. Shipping within 24 hours after payment. International bidders please message me before bidding for shipping quote. thank you for looking! bid with confidence!
|
|
|
CLIFTON PRECISION STEPPER MOTROR, 23-SHAT-14PB/H102, 3.5VDC, P/N26921-127S80361
CLIFTON PRECISION STEPPER MOTROR. 23-SHAT-14PB/H102, 3.5VDC. P/N26921-127S80361, CLASS B INSULATION Total 1.5lb. SFRB If you have question please let me know.
|
|
|
MOLON STEPPER MOTOR LMS-2800-1, 127S80360 with Typewriter Head
MOLON STEPPER MOTOR LMS-2800-1. 127S80360 with Typewriter Head SFLB. 1 LB If you have question please let me know.
|
|
|
Superior Electric DRD001 Modulynx Stepper Control
Superior Electric DRD001 Modulynx Stepper Control Description Superior Electric DRD001 Modulynx Stepper Control One off gear. Built with 2 Modulynx Drives Expermenters Special Manufacturer Superior Electric Manufacturer Part Number DRD001 Item/Ship Weight 25 LBS Tech Condition This item has not been fully tested and is being sold as is. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please ... morecontact us before bidding. Shipping We will professionally package. Using instapak foam-in-place if needed, and insure this product for safe delivery. Domestic shipping rates are available using the shipping calculator below, subject to terms& conditions. Please contact us for international shipping rates. PID 17994 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to contact you before shipping to make an adjustment to a different method which may change the price for shipping as well. This bug has been reported, but they gave no timeline for a fix, so if you are purchasing an item on the larger side(boxed size appr
|
|
|
Techno C116-4 stepper controller pkg used for cnc router 3 axis w/motor cables
Techno-Isel C116-4 stepper motor controller for cnc router or pick and place. Includes 3 stepper motors matched for the unit and cables for the stepper motors. All tested and working when removed 60 days ago. working when removed Uses 9 pin cable from computer to controller not included but available locally. Software is available from Techno use the gcode program for davinci model cnc or Kay software available at Techno. If you have this controller you need this as a back up. Make reasonable offer. Free ground freight to lower 48 states. Lots of manuals available on line for the C116-4.
|
|
|
AMS Stepper Motor Drive SAX-422 120V
AMS Stepper Motor Drive SAX-422 120V This item was working inventory at a large semi-conductor manufacturer and is sold with a 7 day Not DOA satisfaction guarantee. All pictures are of actual item for sale. gsrx_vers_444(GS 6.2(444) Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
MITSUMI Stepping Motor M35SP-7 step angle 7.5 56 ohm brass gear stepper robotics
Normal 0 false false false EN-US X-NONE X-NONE used mitsumi stepping motor with cable. specifications below. thanks for looking Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 MITSUMI Stepping Motors M35SP-7 OUTLINE"M35SP-7" has the thinnest body among the 35mm outer diameter model series. Output torque characteristics-holding torque: 29.4mN·m. Pull-out torque: 18.1mN·m/200pps, and pull-in torque: 17.6mN·m/200pps(6V DC) With these torques this motor materializes an excellent size performance. Stepping Motors FEATURES 1. Compact size and high output torque. 2. Superior running quietness and stability. 3. Step angle: 7.5°. 4. Excellent responsiveness acquired. USES Printers. Multifunction machines, copy machines, FAX, and such. Items M35SP-7 Rated Voltage DC 6V DC 24V Working Voltage DC ... more5.4~6.6V DC 21.6~26.4V Rated Current/Phase 807mA max. 517mA No. of Phase 4 Phase 4 Phase Coil DC Resistance 8 Ù/phase±7% 50 Ù/phase±7% Step Angle 7.5°/step 7.5°/step Excitation Method 2-2 Phase excitation(Unipolar driving) Insulation Class Class E insulation Class E insulation Holding Torque 29.4mN·m 34.3mN·m Pull-out Torque 18.1mN·m/200pps 31.4mN·m/200pps Pull-in Torque 17.6mN·m/200pps 30.9mN·m/200pps Max. Pull-out Pulse Rate 770pps 1.050pps Max. Pull-in Pulse Rate 710pps 850pps MITSUMI SPECIFICATIONS Stepping Motors CHARACTERISTICS M35SP-7(8 Ù. 6V DC) 0 0 4.90 9.80 14.70 19.60 24.50 29.40 34.30 100 200 300 400 500 600 700 800 Pull-out Torque Pull-inTorque Pulse Rate(pps) Torque(mN·m) M35SP-7(50 Ù. 24V DC) 0 4.90 9.80 14.70 19.60 24.50 29.40 34.30 0 200 400 600 800 1000 1200 1400 Pull-out Torque Pull-inTorque Pulse Rate(pps) Torque(mN·m) DIMENSIONS Unit: mm. General tolerance: ±0.5
|
|
|
Applied Motor Products 5023-122 Stepper Motor and 23 PARAGON module assembly
Applied Motor Products 5023-122 Stepper Motor and 23 PARAGON module assembly The motor with gear is"pulled" from working environment All pictures are of actual item for sale WARRANTY All of our items sold in working condition have a minimum 14 day warranty. Unless otherwise stated in the listing. Please refer to the item you are purchasing, some have exchange only and some are sold for“ parts only” and some have no warranty at all. SHIPPING We will use most all shipping methods. And will refund the shipping difference if it is calculated to high on ebay. Not all shipping options are shown available when purchasing an item on ebay. However, if you send us an email we will change it, and if possible make arrangements for the item to be shipped your preferred way. EXPEDITED SHIPPING IS AVAILABLE Please allow 1-2 additional business ... moredays for packaging large items. Or items that need to be sent freight. Please note: For orders placed before 3:00 p.m. CA we will try to ship the same day depending on overall order volumes; orders placed after 3:00 a.m. will be shipped the next business day. Orders placed after 3:00 a.m. CA on Friday will not be shipped out until the following Monday. Most all items may be expedited and we will let you know the addition fee. FedEx and UPS labels may be prepaid by you. And emailed with approval. PAYMENTS We Gladly Accept Payments via PayPal. We also accept Wire Transfers and Cashiers Checks. Checks must clear prior to item being shipped. P/O are accepted and our company invoices available(fax) 408-778-9420, We do have a company website where items maybe purchased as well. Sales Tax: We are required by law to collect 7.50% sales tax in California and 8.75% Santa Clara County RETURNS We want to make sure you're 100% satisfied with your purchase! If. By chance, a product needs to be returned to us it must be in the condition you received them in, with all warranty stickers in place and in the original box and/or packaging. A refund for returns will be made promptly upon receipt
|
|
|
NANOTECH STEPPER MOTOR L6509X0102-A
NANOTECH STEPPER MOTOR L6509X0102-A Search NANOTECH STEPPER MOTOR USED CONDITION L6509X0102-A SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION. ITEM PICTURED IS A REPRESENTATIVE UNIT; CONDITION WILL BE VERY SIMILAR. GUARANTEED NOT DOA QZ 351. SW/4 RB 6/28/13. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held and you will be contacted. We apologize in advance for any inconvenience this may ... morecause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that the item you receive is damaged or D.O.A. please notify us within 14 days after the arrival of the item.
|
|
|
HP Laser Jet M1522nf Stepper Motor Q6502-60105
Click Image to Close. HP Laser Jet M1522nf Stepper Motor Q6502-60105, Select a photo: Manufacturer HP, Model Number Q6502-60105, SKU 19-03831, Condition Used- Grade A, Warranty 7 Day DOA Guarantee, Excellent Condition. Fully Functional, HP Laser Jet M1522nf Stepper Motor Q6502-60105. Includes: Auction includes only whats listed. If unsure, please ask. Auction Sales Policy: Your bid is a contract- Place a bid only if you are serious about buying the item. If you are the winning bidder. You will enter into a legally bidding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction or if payment is not received within 5 days, item may be offered to the next highest bidder or relisted at the sellers sole discretion. Shipping Details: All shipping originates from ... morezip code 95628. Unless otherwise specified. Shipment will be via UPS Ground, USPS Priority Mail, or USPS First Class Mail. If a specific delivery service is required, please contact seller and make arrangements before bidding. If needed overnight delivery can be arranged, please contact seller as early as possible in the day to arrange. Orders are generally shipped on the same day or day after full payment is cleared. We gladly ship international. Please contact us for a quote. All items are carefully packed. With brand new packaging materials, to ensure your delivery arrives on time and without damage. Payment Accepted: Returns: All sales final. Unless otherwise stated above. All auctions include 7 day DOA guarantee. In the event an item arrives DOA and a warranty is included, contact seller for a Return Materials Authorization(RMA) number. RMA request responses will include instructions for returning product. Inventory permitting, all RMA requests will fulfilled with same item, otherwise auction price, minus shipping costs, will be refunded. Shipping and handling fees are not refundable. Buyer is responsible for shipping costs incurred shipping products back, Contact: B
|
|
|
Mettler Toledo Myriad Stepper Motor & Encoder Controller Board VEXTA PIC-16
Mettlet Toledo Myriad Core System Stepper Motor& Encoder Board. PIC16 based stepper controller. Proprietary item removed from a automated chemistry sytem. But it may be useful for components or other use. Unfortunately this item is untested, but removed carefully from a decommissioned system. Condition: As shown. Untested. Item carries a 14-day right of return. Please email with any questions! 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13f96188949-0xfe-
|
|
|
PARKER COMPUMOTOR ZETA57-51-MO, 2 Phase Stepper Motor, NEMA 23
For sale is a PARKER COMPUMOTOR ZETA57-51-MO 2 Phase Stepper Motor. NEMA 23 size. It has dual 1/4 inch round shafts and was removed from a precision positioning stage. It is being sold AS-IS so please do your own due diligence to insure that it is appropriate for your needs. You are buying one of the motors shown in the pictures. Thanks for looking.
|
|
|
Seeburg Stepper Power Supply type PSS1
Please use the Shopping Cart to group your items together so you can make one payment and pay one shipping charge. Thank You. Please see all of my photographs below. The Seeburg Stepper Power Supply Type PSS1 is for use in adapting Type RCSU4 and RCSU5 Tube Stepper Units to PFEA and APFEA Model Phonographs. As well as the later SS160 Stereo Showcase, LS1 Spectra and LS2 Gem. I have scanned the original Installation Instruction Sheet and it is shown after the photos below. It appears to be in good condition but I have no way to test it. Here are scans of the Installation Instructions: International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional ... morecosts will be prior to bidding or buying. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3 Rubber Feet for The Firm Box Step Aerobic Exercise Stepper
3 Rubber Feet for The Firm Box Step Aerobic Exercise Stepper To have as spare or replacement.
|
|
|
VAT Series 64 8" Vacuum Valve w/stepper motor
64246-PE52 USED. Not tested, sold as-is for parts/rebuild.
|
|
|
B-04F drive stepper motor screw with a nut slider small Stages 2-phase 4-wire
Description B-04F drive stepper motor screw with a nut slider small Stages 2-phase 4-wire Specification: Motor type: 2-phase 4-wire Driving voltage: DC4-5V Screw length: 73mm Effective stroke: 63mm Screw pitch: 3mm Step Angle: 18 ° Stages size: 90* 30mm Package Including B-04F drive stepper motor x 1 Recommended Products Check out my other items! Payment We accept Paypal only. It is fast, Easy and Safe. Payment must be completed within 7 days. PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES. LOCATL TAXES OR ANY OTHER IMPORTATION FEES. Please list your special requests(color. Packages, etc. in the PAYPAL NOTES SECTION when you make payment. Shipping We Ship to Worldwide. Orders processed within 24-48 hours of payment verification. We only ship to confirmed PAYPAL addresses. Your PAYPAL address MUST MATCH your Shipping address. Items will ... morebe marked as" Gift" in low value. Items are shipped via China Post& Hong Kong Post& Singapore Post Air Mail. Country Shipping Way Shipping Time Tracking Number United States EUB 7-12 Yes Other Country China/Hong Kong/Singapore Post Air Mail 15-35 No If you need tracking number. Please add 2.5usd Register Shipping fee. Warranty and Guarantee Good Good quality. Buy with confidence! If you are not satisfied when you receive your item. Please return it within 7 days for a replacement or money back. Please contact me before you return it. Not accept returning of electronic components. Full refund after we receive our original item. Note: Return shipping is to be paid by the Buyer. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback. So that we can satisfactorily address your concerns. Contact Us We strive to provide you with the best service. We will reply your question within 24 hours. Our goal is customer satisfaction! Our Working-time From 8:30 AM to 21:30 PM. you can check our working time from the World-tim
|
|
|
Mettler Toledo Myriad Stepper Motor Controller Board Stirrer Control VEXTA PIC
Mettler Toledo Myriad Core Stirrer Control PCB. Proprietary item removed from a automated chemistry system. But it may be useful for components or other use. I believe this board controls a number of steppers, and can be controlled by RS232 or RS422. It features four SLA7024M stepper controller IC's with aluminum heatsinks. Unfortunately this item is untested, but removed carefully from a decommissioned system. Condition: As shown. Untested. Item carries a 14-day right of return. Please email with any questions!
|
|
|
COMPUMOTOR M57-51 STEPPER MOTOR PARKER COMPUMOTOR M57 CODE C-B
COMPUMOTOR M57-51 STEPPER MOTOR PARKER COMPUMOTOR M57 CODE C-B SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS SV 28 DRAWER 3 CM
|
|
|
3x ..... STEPPER MOTOR .... MAE Offanengo + SEIKO .... IDEAL FOR CNC
MAE Offanengo + SEIKO ALM-34- Payment: We accept paypal only. The Buyer is responsible for paying any amount charged by the government of the Buyer's country. This includes. But is not limited to, any duty, tax, GST, COD or similar charges. STANDARD MAIL $26 Estimated Delivery within 8-14 business days- REGISTERED SENT MAIL WITH TRACKING NUMBER Estimated Delivery within 4-5 business days CONTACT ME. SEE MY PARTS LIST THANK YOU FOR VISITING supremeauctiononlinesoftware.widgets.FeedbackWidgetBasic.swf. Supreme. Supremewidgets. Supremeauctiononlinesoftware.widgets.GalleryBasic.swf.
|
|
|
Industrial Devices NEXTSTEP-SYST01, Stepper Driver without terminals. sn:86682
apps.froo.com | Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. Item condition& description: To find in the Item specifics(top of description MENU tap) and all above pictures. You can intentionally find the defective on body. Scratch, and test if any in the pictures. Please advise me if pictures are not clear. You can find the" Technical specification" in the Google.com and product WEB link. Thank you. Shipping Info: Usually Items send out within 1 working day after receiving cleared payment. Shipping time 18-26 Days for Economy international/ Free Shipping. Shipping time 7-10 Days for Expedited international Shipping. Varies for items shipped to an international location depend on local post. Shipping service and receipt of Delivery times may ... morevary. Especially during peak periods. Track& Confirm: The registered and tracking number will be see in the eBay purchased history and PayPal after shipment. Could you please to enter your item tracking number at link following. http:track.thailandpost.co.th/trackinternet/Default.aspx?lang=en In the United States can track item at below. https:tools.usps.com/go/TrackConfirmAction.action or https:trkcnfrm2.smi.usps.com/PTSInternetWeb/index.jsp Question: If you have any question about the item. F ee l free to email us at eBay messages. I will do my best to answer. Thank you for interesting and let me know. Feedback: The 5 star Positive feedback is very important to me. I have to highly standard of excellence 100% customer satisfaction. Could you please contact me immediately to satisfactorily solve problem for best service. Would not give me unfair. Neutral or negative feedback. Thank you. Payment: We accept only Get PayPal buyer protection for your item when you pay with PayPal. Return: Generally standard 14 days. See more information in the returns policy at tab shipping and payments. We appreciate your business.
|
|
|
(2) Xerox Copier Drive Belts Stepper Motor Drive Belts
2) Xerox Copier Drive Belts/ Stepper Motor Drive Belts One is 3" if spread flat. The other is 6" if spread flat Leftovers from a copier I dismantled. Thought someone could use them cheap Satisfaction always always always Guaranteed I ship every Tuesday and Friday and these ship for FREE! Thank You! Check out my!
|
|
|
Parker Hann Compumotor 6K6-NK-6 AXIS SERVO STEPPER MOTOR CONTROLLER
This is a Parker Hann Compumotor axis servo stepper motor controller. The model number is 6K6-NK-6. It has an aluminum mounting plate on the rear of box. It is used and was removed from operating equipment. It is in very good condition! Shipping& handling Fed Ex ground within the continental US is $22.95. No international shipping on this particular item.
|
|
|
Parker Stepper Motor LV173-02-10
Cable looks to have bare wires. Though there is a spare cable(RS232 I believe) included w/ this item. Got this at an auction and want to get it to someone else to use. If you have any questions contact me and I'll do my best to help. Only the best, Jesse
|
|
|
PARKER COMPUMOTOR STEPPER MOTOR CONTROL CONTROLLER DRIVE OEMZL4 OEM-ZL4
You are bidding on a recently working Parker Indexer Stepper Drive Compumotor that was taken out of a fully functional system for an upgrade. It also includes the power cord. I will ship Worldwide!
|
|
|
DEK P/N 117933 Stepper Driver Card 6/B-3
DEK P/N 117933 Stepper Driver Card 6/B-3 Great Condition. Photo is of exact item. 3) More in Stock! Stepper Driver Card 6/B-3 for DEK Screen Printers* 7 day right of return with refund if does not work in your machine* From parts crib of used SMT equipment company We have many spare DEK& MPM parts. Boards, monitors, etc. etc. Let us know what you need. email mastersurplus@verizon.net if you have any questions. UPS flat rate shipping anywhere in the 48 States: FREE International: No problem. Shipping quoted on request. Thanks for looking!
|
|
|
92245 Parts Only, Vexta PK299E4.5T-A1 Stepper Motor 4.5A 2.8Vdc
92245 Parts Only. Vexta PK299E4.5T-A1 Stepper Motor 4.5A 2.8Vdc, 1/2" Shaft OD and 1-3/8" Shaft Length, Lead wire into motor has been cut, but otherwise motor is unused. Item is intended as parts source only- actual working function unknown. Austin Surplus SKU: 92245 Location: GRG-R05-P03-S03-0010500
|
|
|
EAD LA23BCK STEPPER MOTOR USED
EAD LA23BCK STEPPER MOTOR USED I THINK THE ENDING OF THE PART NUMBER MAY BE A-2. BUT I DON'T KNOW I HAVE A SPEC SHEET FOR IT. BUT I CAN'T TELL THE VOLTAGE BECAUSE THE LAST NUMBER IS TOO WORN ON THE SIDE. I TURN THE POLE AND I CAN FEEL IT STEPPING. THERE ARE 5 WIRES COMMING OUT. SOLD AS IS. US RESIDENTS ONLY PLEASE. $13 FLAT RATE SHIPPING VIA USPS IN THE US g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13f9fb3e701-0xf5-
|
|
|
STP-42D0004 STEPPER MOTOR PULLED FROM A BROTHER MULTIFUNCTION PRINTER
STP-42D0004 STEPPER MOTOR PULLED FROM A BROTHER MULTIFUNCTION PRINTER SEE PICTURE. THE PRINTER HAD A BROKEN DRIVE GEAR. I KNOW THIS MOTOR WORKS. SOLD AS IS. MOTOR CASING = 1.66" X1.66"X1.06" SHAFT = APPROX 0.62" LONG DIAM APPROX 0.20" I DO NOT HAVE ANY MORE INFO ON THIS DEVICE. US RESIDENTS ONLY PLEASE. $6 FLAT RATE SHIPPING VIA USPS IN THE US IF YOU LIKE WE CAN COMBINE SHIPPING INTO A MEDIUM FLAT RATE BOX FOR $13( ALL COMBINED LOTS MUST FIT)
|
|
|
Lot of 4 Japan Servo KH56KM2B098 Stepper/Stepping Motor
Questions? Call us: 1-877-328-9236. Lot of 4 Japan Servo KH56KM2B098 Stepper/Stepping Motor. Manufacturer: Japan Servo Model: KH56KM2B098 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Japan Servo Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: These items were not tested since we do not have the proper resources. NOTE: There are no specification labels on these items. So we do not have any information on these. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 4) Japan Servo KH56KM2B098 Stepper Motor, Specifications: Manufacturer: Japan Servo, Model: KH56KM2B098, SKU: M23L027 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) ... more328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available for buyers and their direct employees. War
|
|
|
Minebea 17-PM-K302-04V 3.7V 1.2A 1.0DEG Stepper Printer Motor
Steve’s Computer Parts The picture shows what you get. Nothing more and nothing less. While I've tried to list important information of what you are getting. What’s in the picture unless told in writing is what you will get. Read the read more for condition. Please look carefully. I want you to get what you want. Mistakes are costly for everyone. To ensure accuracy. Match the photos of our part against your existing part and/or item. Enlarge the photo to show more detail. Look for matching numbers. Origin of Parts: All parts are pulled from working units and tested to not be dead on arrival. Payment Options: Paypal. Shipping: Your item will be shipped using USPS First Class Package(or comparable service) Which is estimated at 2 to 5 business days, after full payment has been received. Return Policy: UNLESS STATED NO RETURNS. You get a ... moreno hassle 100% Satisfaction or Your Money Back: If you are not 100% satisfied with your purchase. We offer a 100% money back guarantee when the item is received back in the same condition and within 14 days. Our parts are marked for our protection. Customer Service: If you have any problems or questions about your item. Please contact us through ebay or through our store immediately. Our rating of 100% satisfied customers is very important to me We will promptly address your issue should you have a problem. Please contact us with any questions. We are adding items constantly to our Web Store. We have thousands of items to list and are receiving more daily. Visit us at: Steve’s Computer Parts Thank you for shopping with us and please return back often to check out what we have added. Have a Great eBay day! Steve’s Computer Parts
|
|
 |