|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: China welcome to my store. Description The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. ... moreThe module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board. So it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions(down to 1/32-step) It operates from 8.2– 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow(rated for up to 2.2 A per coil with sufficient additional cooling) Features: Simple step and direction control interface Six different step resolutions: full-step. Half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step, Adjustable current control lets you set the maximum current output with a potentiometer. Which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates, 45 V maximum supply voltage, Built-in regulator(no external logic voltage supply needed) Can interface directly with 3.3 V and 5 V systems, Over-temperature thermal shutdown. Over-current shutdown, and under-voltage lockout, Short-to-ground and shorted-load protection, 4-layer. 2 oz copper PCB for improved heat dissipation, Exposed solderable ground pad below the driver IC on the bottom of the PCB, Module size. Pinout, and interface match those of our A4988 stepper motor driver carriers in most respects(see the bottom of this page for more information) Package List 5 x Stepper Driver DRV8825. 5 x heatsink, Payment 1.We accept PayPal only. 2.Payment must be received within 7 business days of auction closing.Or a unpaid case will be opened. Delivery details 1.Standard shipping carrier is ePacket with tracking code for United States address.Delivery within 7-14 busienss days. 2.For outside US address.Standard shipping carrier is Hong Kong Post without tracking code,delivery within 25-30
Buy It Now
Free Shipping Condition: New Location: China CNC turntable support. Single-step mode, the user can set the processing task to be executed to single-step mode, which provides good support for error ... morediagnosis and fault recovery. 1x Parallel Cable.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China 3v-36V Dual 15A H-Bridge DC Motor Driver Module Description 3v-36V Dual 15A H-Bridge DC Motor Driver 30A for Robot/ Car Arduino Compatible Module Specifications: ... moreThe drive features a complete two HALF-BRIDGE DRIVER chip and IRF3205 HEXFET Power MOSFET components. Complete two HALF-BRIDGE DRIVER IC and reliable drive. So that the MOSFET switching losses to a minimum. Improve power utilization. MOSFET driver chip hardware comes with brake function and energy feedback. The drive can operate at 0% 99% duty cycle of the PWM modulation. The motor drive voltage can be sufficient. The motor is transferred: DIR = 1 PWM = PWM Motor Reverse: DIR = 0 PWM = PWM Parking brake: DIR = X PWM = 0 Motor and power connections Power to Positive POWER. GND to negative one. Two motors to MOTOR1, MOTOR2 Rated voltage: 3v-36v Rated current: 15A Peak Current: 30A Dimensions: l10*58 mm Package Includes: 100% Brand New 1 x 3-36V Dual 15A H-Bridge DC Motor Driver Module Please Visit Our Store for More Special Prices& Top Quality Items: Click Here Shipping All the items to USA will be sent via ePacket(this is a service set up by USPS for US address recipients) with tracking number. Other countries. For total order price below $30 we will ship your item without tracking number. If you need Registered shipping. Please contact us for cost. Usually all the items will be shipped via Hong Kong Post Airmail or China Post Airmail. If you need other express service: EMS/DHL/FedEx/UPS. Please contact us for the correct price. Your order will be dispatched within 1(one) business day after the full payment is cleared. Airmail Packets' Delivery Time(reference only) USA. Australia, New Zealand, Southeast Asia, East Asia. 7-20 business days. EU(France. Spain, Italy, Germany, UK, etc. Canada,10-25 business days. Other Countries. 10-30 business days. Russia. Ukraine, Brazil, Chile, Argentina, Mexico, etc. 15-35 business days, usually long time. Delivery time depends on postal process and other factors(especially Customs Inspection) T
Buy It Now
$8.00 Shipping Condition: New Location: China It could work under Mach4 software. The maximum step-pulse frequency is 2000 KHz. Now MK3-M4 is stronger, more stable and better performance than other ... moreversion. Support all versions of Mach4. Under Mach4 working state, USB cable unplugs and then plugs in, but also the normal connection.
Buy It Now
$89.00 Shipping Condition: New Location: Denmark 3pc Closed-Loop Stepper Drive HBS57. NEMA 23 Closed-Loop Stepper motor driver HBS57. NEMA 23 Closed-Loop Stepper motor 23SSM6440-EC1000. P4 P5 is set ... moreto Y-axis, Y axis pulse. Its quick response and great features make it ideal for hunting does not apply, such as bonding and visual systems, including a short distance fast motion is required, hunting will be a problem.
Buy It Now
Free Shipping Condition: New Location: China MA860H DSP digital driver, based on DSP digital chip, new algorithm, special optimization for drive and motor heating, low vibration, low heat, low noise ... moreand high speed performance, suitable for 86 and 57 motor series.
Buy It Now
$2.99 Shipping Condition: New Location: China Description This module is blue PCB now.Please know it. The DRV8825 stepper motor driver carrier is a breakout board for TI's DRV8825 microstepping ... morebipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board. So it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting. Overcurrent and overtemperature protection, and six microstep resolutions(down to 1/32-step) It operates from 8.2– 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow(rated for up to 2.2 A per coil with sufficient additional cooling) 1）Simple step and direction control interface 2）Six different step resolutions: full-step. Half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step 3）Adjustable current control lets you set the maximum current output with a potentiometer. Which lets you use voltages above your stepper motor's rated voltage to achieve higher step rates 4）45 V maximum supply voltage 5）Built-in regulator(no external logic voltage supply needed) 6）Can interface directly with 3.3 V and 5 V systems 7）Over-temperature thermal shutdown. Over-current shutdown, and under-voltage lockout 8）Short-to-ground and shorted-load protection 9）4-layer. 2 oz copper PCB for improved heat dissipation 10）Exposed solderable ground pad below the driver IC on the bottom of the PCB 11）Module size. Pinout, and interface match those of our A4988 stepper motor driver carriers in most respects(see the bottom of this page for more information) This product is a carrier board or breakout board for TI’s DRV8825 stepper motor driver; we therefore recommend careful reading of the DRV8825 datasheet(1MB pdf) before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil(see the Power Dissipation Considerations section below for more information) Here are some of the driver’s key
Buy It Now
$13.00 Shipping Condition: New Location: Petaluma, United States One of the most important parts of a sale is getting the product to you in good condition.
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Delta Tau Data Systems. 64-Bit Opto I/O Breakout Board. I/O: Sourcing 32 Input, 32 Output. Mounting: DIN Rail. Model # : ACC-34A Opt 2. NOT an authorized ... moredistributor for. your account number during checkout.
Buy It Now
$5.00 Shipping Condition: New Location: China Output frequency:2000 KHZ (2MHz). Applications: MK4-V:4 axis motion card works with Mach3 CNC system under all windows platform. Mach3 Port Position: ... moreP1 Port. - Fully support all Mach3 version. - 16 general-purpose input,8 output has speed function,the spindle actural speed Mach3.
Buy It Now
$4.00 Shipping Condition: New Location: China Shenzhen Getech Co. Geeetech has been one of the most prominent rising star in the area of 3D printing in Shenzhen ,China, even the world, since founded ... morein 2011. Geeetech advocates making 3D printing easy and economical and we are hoping to help more enthusiasts get easy access to the wonderful world of 3D printing.
Buy It Now
$3.99 Shipping Condition: New Location: China When the Mach4 is working, unplug a USB cable and then plug it back in, the Mach4 can still be connected normally. - Its status indicators can indicate ... morevarious statuses, including USB connection status, Mach4 connection status and running.
Buy It Now
Free Shipping Condition: New Location: China 14-22V to 110V Inverter Ternary lLithium Phosphate Pure Sine Wave Circuit Board. Press Z+ and Z-, the Z axis will move up and down. Press X+ and X-, the ... moreX axis will move left and right. Press Y+ and Y-, the Y axis will move Front and Back.
Buy It Now
$12.95 Shipping Condition: New Location: Hoffman Estates, United States 3 pcs 270 oz-in stepper motors, NEMA23.
Buy It Now
$5.00 Shipping Condition: New Location: China 1 x Handwheel. - Motor type: Stepper Motor. - 1 x USB CNC 9 Axis. - Model Number: usb cnc 9 axis. - Slave axes. - 1 x USB Cable. - USB connection. - 100 ... morekHz maximum step frequency.
Buy It Now
Free Shipping Condition: Brand New Location: China welcome to my store. Description The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. ... moreThe module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board. So it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions(down to 1/32-step) It operates from 8.2– 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow(rated for up to 2.2 A per coil with sufficient additional cooling) Features: Simple step and direction control interface Six different step resolutions: full-step. Half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step, Adjustable current control lets you set the maximum current output with a potentiometer. Which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates, 45 V maximum supply voltage, Built-in regulator(no external logic voltage supply needed) Can interface directly with 3.3 V and 5 V systems, Over-temperature thermal shutdown. Over-current shutdown, and under-voltage lockout, Short-to-ground and shorted-load protection, 4-layer. 2 oz copper PCB for improved heat dissipation, Exposed solderable ground pad below the driver IC on the bottom of the PCB, Module size. Pinout, and interface match those of our A4988 stepper motor driver carriers in most respects(see the bottom of this page for more information) Package List 5 x Stepper Driver DRV8825. 5 x heatsink, Payment 1.We accept PayPal only. 2.Payment must be received within 7 business days of auction closing.Or a unpaid case will be opened. Delivery details 1.Standard shipping carrier is ePacket with tracking code for United States address.Delivery within 7-14 busienss days. 2.For outside US address.Standard shipping carrier is Hong Kong Post without tracking code,delivery within 25-30
Buy It Now
$1.46 Shipping Condition: New Location: 金东区, China
Buy It Now
$3.99 Shipping Condition: New Location: China Only support Ethernet interface. - Support 10m/32.8ft Ethernet interface cable. - 1 x Ethernet Cable. - 1 x User Manual. - Support save data when power ... moreoff. Usually it cost about 35USD-50USD.
Buy It Now
Free Shipping Condition: New Location: 金东区, China The DRV8825 stepper motor driver carrier is the breakout board for TI's DRV8825 microstepping bipolar stepper motor driver. DRV8825 has adjustable current ... morelimit, overcurrent and overheat protection, and six microstep resolutions (down to 1/32 step).
Buy It Now
$29.68 Shipping Condition: New Location: Hoffman Estates, United States 4pcs NEMA23 570 oz/in 5.0A 1/4” Dual Shaft Stepper Motor. This kit contains everything you need for four axis of motion. 4pcsNEMA23 570oz/in 5A 1/4” Dual ... moreShaft Stepper Motor (KL23H2100-50-4BM). Mach3 set up for kit and machine, Download here.
Buy It Now
Free Shipping Condition: New Location: China For NEMA17 Stepper Mounting Plate Suitable for NEMA 17 Stepper Linear-3D Printer. DM542 Stepper Motor Driver For 57 86 Series 2-phase Digital Stepper ... moreMotor Driver. DM860H Digital Stepper Motor Driver 5.6A for 57 86 Stepper Motor NEMA23 34.
Buy It Now
$115.00 Shipping Condition: New Location: China 4 pcs Nema 23 stepper motor 270 oz.in single shaft,3A， 23HS8430. Hording torque when DM542A run under high speed is also significantly higher than the ... moreother two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$2.88 Shipping Condition: New Location: China The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened. This stepper motor driver lets ... moreyou to operate bipolar stepper motors in full-, half-, quarter-, eighth-.
Buy It Now
$5.00 Shipping Condition: New Location: China Handwheel interface: support. - Applicable software: Mach3. - Pulse rate: 200K max (per axis). - Number of axes: 5 axes (XYZ axes and two rotation axes). ... more- Data interface: Ethernet. - Its transmission distance is farther than that of USB motion card.
Buy It Now
Free Shipping Condition: New Location: 龙岗区, China Package Included : 3 x Integration Drive+Motor 1 x Power Supply S-400-36 1 x 5 Axis Mach3 interface board 1 x 25Pin Cable(White or Black) 1 x USB Cable ... moreApplications Area : ToAuto Integrated Closed Loop Motors can be adopted to upgrade performance of stepper systems, or replace many traditional brushless servo systems. Their unique features make them ideal solutions especially for applications requiring low costs, high torque, quick response & acceleration, quick settling time, closed loop control, small installation space, such as electronic dispensing machines, semiconductor equipments, CMM measuring, medical devices, high performance CNC routers / mills / laser engravers, scientific lab instruments.
Buy It Now
$5.00 Shipping Condition: New Location: China It could work under Mach4 software.The maximum step-pulse frequency is 2000 KHz. Now MK4-M4 is stronger, more stable and better performance than other ... moreversion. Support all versions of Mach4. Under Mach4 working state, USB cable unplugs and then plugs in, but also the normal connection.
Buy It Now
Free Shipping Condition: New Location: China Support PWM frequency range: 0- 2khz. DM542 Stepper Motor Driver For 57 86 Series 2-phase Digital Stepper Motor Driver. For NEMA17 Stepper Mounting Plate ... moreSuitable for NEMA 17 Stepper Linear-3D Printer.
Buy It Now
$1.99 Shipping Condition: New Location: China CNC turntable support. Single-step mode, the user can set the processing task to be executed to single-step mode, which provides good support for error ... morediagnosis and fault recovery. 1x Parallel Cable.
Buy It Now
Free Shipping Condition: New Location: China For NEMA17 Stepper Mounting Plate Suitable for NEMA 17 Stepper Linear-3D Printer. DM542 Stepper Motor Driver For 57 86 Series 2-phase Digital Stepper ... moreMotor Driver. DM860H Digital Stepper Motor Driver 5.6A for 57 86 Stepper Motor NEMA23 34.
Buy It Now
$3.00 Shipping Condition: New Location: China The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened. This stepper motor driver lets ... moreyou to operate bipolar stepper motors in full-, half-, quarter-, eighth-.
Buy It Now
$78.00 Shipping Condition: New Location: China Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. 3pcs Stepper motor driver DM542A, 24-50VDC.
Buy It Now
Free Shipping Condition: New Location: China USB Type B Female Breakout Board to DIP Converter. 5 Pieces USB Type B Female Breakout Board to DIP Converter. PCB Board Adapter. Size: Approx. People ... morealways bought together with. Printer Accessory.
Buy It Now
Free Shipping Condition: New Location: China USB Type B Female Breakout Board to DIP Converter. 5 Pieces USB Type B Female Breakout Board to DIP Converter. PCB Board Adapter. Size: Approx. People ... morealways bought together with. Printer Accessory.
Buy It Now
$3.99 Shipping Condition: New Location: China It could work under Mach4 software. The maximum step-pulse frequency is 2000 KHz. Now MK3-M4 is stronger, more stable and better performance than other ... moreversion. Support all versions of Mach4. Under Mach4 working state, USB cable unplugs and then plugs in, but also the normal connection.
Buy It Now
Free Shipping Condition: New Location: China It could work under Mach4 software. The maximum step-pulse frequency is 2000 KHz. Now MK3-M4 is stronger, more stable and better performance than other ... moreversion. Support all versions of Mach4. Under Mach4 working state, USB cable unplugs and then plugs in, but also the normal connection.
Buy It Now
Free Shipping Condition: New Location: China Fully supporting all Mach3 versions, including the Mach3 R3.043.066 version. English user manual and mach3 software will send you. Dual core ultra - high ... morespeed CPU (the maximum single core frequency 204MHz), operation processing ability has great redundancy, and ensure the realization of four axis linkage under1500KHz frequency of the pulse output, 6 axis pulse output frequencies up to 800kHz, connected to the servo / step.
Buy It Now
$3.20 Shipping Condition: New Location: China Wiichuck is a break out board for Wii-Nunchuck. It is grate for DIY projects. 10PCS I2C Wii WiiChuck Nunchuck Adapter Shield Board Module Raspberry pi ... moreArduino. Use this shield to achieve communication between nunchuck and Arduino.
Buy It Now
Free Shipping Condition: New Location: China P-7: Power forward turn X Angle stop, delay N seconds; Automatic reversal to X Angle stop; After N seconds, turn forward again and stop at X Angle. An ... moreinfinite loop. 2: After the function is set, press the setting key to enter the pulse value setting; Press "Add/subtract" to set the pulse value (Note: 1600 pulses of the stepper motor with 1.8 degree step Angle are one circle).
Buy It Now
Free Shipping Condition: New Location: 金东区, China Supports connection of electronic handwheel. Supports 4 -axis linkage and can connect 4 stepper motor drivers or drivers;. The maximum step pulse frequency ... moreis 100KHz, suitable or stepper motors;. 1 x USB cable.
Buy It Now
$1.95 Shipping Condition: Brand New Location: China 1 x Adapter Breakout Board. The output port is P17 port. The output port is P1 port. Connectors: USB(Female)+25PIN(Male). 1 x USB Cable. Pet supplies. ... moreWeight: 40g. Color: Blue+Black.
Buy It Now
$3.99 Shipping Condition: New Location: China Applications: MK6-V:6 axis motion card works with Mach3 CNC system under all windows platform. Mach3 Port Position:P1 Port. - Fully support all Mach3 ... moreversion. - 16 general-purpose input,8 output has speed function,the spindle actural speed Mach3.
Buy It Now
$3.39 Shipping Condition: New Location: China Features: 1. Fully support of MACH3 and other computer software support for parallel port control. 2. USB power supply and peripherals powered phase separation ... moreto protect computer security. 3. Peripheral wide voltage input,12-24V, and anti-reverse function. 4. All of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security. 5. All the way to the relay output port, control spindle switch. Output port P17 mouth. 6. All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port. 7. Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled. 8. P1 as PWM outputs can be controlled with optocoupler input spindle governor. 9. Can be accessed by a common cathode or common anode input level to 5V drive. Package included: 100% Brand New 1X 5 Axis Breakout Board 1X USB cable PayPal only. Only ship to PayPal confirmed address. All items are shipped via HK Air Mail Service within 48 Hours once payment's fulfilled. Buyers are responsible for any customs duties if applicable. Normally item will arrive in 10-20 days. Sometime a bit delayed. If item is defective upon receipt. Customer has up to 14 days from date of receipt for an exchange or refund. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. If you need to return. Please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. If you’re in any way dissatisfied with your purchase. Let me know through" MY MESSAGES" or"AskSeller Q"or our mailbox. We will solve it for you. We are committed to ensuring that you are completely satisfied with every transaction.100% Satisfaction guaranteed! We will reply your mail within 24 hours normally. sometimes have a little delay due to the weekends or ho
Buy It Now
$3.89 Shipping Condition: New Location: China Features: 1. Fully support of MACH3 and other computer software support for parallel port control. 2. USB power supply and peripherals powered phase separation ... moreto protect computer security. 3. Peripheral wide voltage input,12-24V, and anti-reverse function. 4. All of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security. 5. All the way to the relay output port, control spindle switch. Output port P17 mouth. 6. All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port. 7. Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled. 8. P1 as PWM outputs can be controlled with optocoupler input spindle governor. 9. Can be accessed by a common cathode or common anode input level to 5V drive. Package included: 100% Brand New 1X 5 Axis Breakout Board 1X USB cable PayPal only. Only ship to PayPal confirmed address. All items are shipped via HK Air Mail Service within 48 Hours once payment's fulfilled. Buyers are responsible for any customs duties if applicable. Normally item will arrive in 10-20 days. Sometime a bit delayed. If item is defective upon receipt. Customer has up to 14 days from date of receipt for an exchange or refund. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. If you need to return. Please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. If you’re in any way dissatisfied with your purchase. Let me know through" MY MESSAGES" or"AskSeller Q"or our mailbox. We will solve it for you. We are committed to ensuring that you are completely satisfied with every transaction.100% Satisfaction guaranteed! We will reply your mail within 24 hours normally. sometimes have a little delay due to the weekends or ho
Buy It Now
Free Shipping Condition: New Location: China 5 Axis Stepper Motor Driver Interface Breakout Board, Features: For stepper motor driver-Can most connection 5pcs driver and control 5pcs motor in the ... moresame time-With 4-wire limit switch to insure our safty movement-With relay port to contro the cnc spindle-Working voltage is 5VDC and support with MACH3.EMC2,KCAM4 software Db25 pin( pc pin) The pin of the interface board Comment(signal) 1 Step 5 Fifth axis pulse 2 Step x X pulse 3 Dir x X axis direction 4 Stepy Y pulse 5 Dir y Y axis direction 6 Step z Z axis pulse 7 Dir z Z axis direction 8 Step 4 Fourth axis pulse 9 Dir 4 Fourth axis direction 10 Limit-1 Limit input interface 1 11 Limit-2 Limit input interface 2 12 Limit-3 Limit input interface 3 13 Limit-4 Limit input interface 4 14 Dir 5 Fifth axis direction 15 Vacant 16 Rly Relay control 17 En All axis enable 18-25 Gnd Gnd Package 100% Brand New 1 x 5 Axis Stepper Motor Driver Interface Breakout Board Shipping 1. Items will be sent out within 48 hours(except weekend and holidays) after we receive the payment. All items are shipped by Singapore or HongKong Post air mail without tracking number.Unless buyers pay extra money. 2. It is estimated that package will arrive in 10-30working days. holidays and weekends are not included) to most countries! If you donot get the items after 30 working days please email us we will Refoud or Reship. 3. Since air mail will takes long time for delivery. If you want items urgently, you could contact us to ask shipping cost of Express mail.such as DHL or EMS or TNT or UPS) 4. We are not responsible for any custom duty or import thanks 5. We only ship the item to the address listed in your paypal payment. Please make sure your shipping address is correct. 6. If you have any request(e.g. change address) Please put a note on paypal. Country Delivery Time Working Days(not including holiday) 5-7 8-10 11-14 15-19 20-30 30 Working Days + Saturday + Sunday 5-9 10-14 15-20 21-25 26-30 35 United States Rate(item arrived) 9% 50% 21% 13% 7% Refund or Resend United Kingdo
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China Delivery Details 1.Standard shipping carrier is ePacket with tracking code for United States address.Delivery within 7-14 busienss days. 2.For outside ... moreUS address.Standard shipping carrier is Hong Kong Post without tracking code,delivery within 25-30 business days.We provide a free tracking for order above 45USD.Please contact us if you want to add a tracking code for small orders. 3.Express shipping like DHL.Fedex,UPS,TNT is also avaiable if you are willing to pay extra.DHL is our standard shipping carrier for Expedited shipping,please contact us if you want a different carrier. 4.Customs duties or taxes are buyer's resposibility for all of the listings.Please check with your local customs office if you have any doubts. 5.Please confirm you are putting a correct and complete shipping address here.You are resposible for extra charge if your package been returned because of wrong address. Description The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board. So it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions(down to 1/32-step) It operates from 8.2– 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow(rated for up to 2.2 A per coil with sufficient additional cooling) Features Simple step and direction control interface Six different step resolutions: full-step. Half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step Adjustable current control lets you set the maximum current output with a potentiometer. Which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates 45 V maximum supply voltage Built-in regulator(no external logic voltage supply needed) Can interface directly with 3.3 V and
Buy It Now
Free Shipping Condition: New Location: China L9110S Dual DC motor Driver Controller Board. Description 1. Double L9110S chip motor driver chip 2. Power supply voltage: 2.5V- 12V 3. Suitable motor ... morescope: motor working voltage of 2.5 v to 12 v. 0.8 A maximum working current. 4. Can drive two DC motors at the same time. Or 1pcs Phase 4 line 2 type stepping motor. 5. PCB size: 2.8 cm* 2.1 cm super small volume. Suitable assembling. 6 Set fixed mounting holes. Diameter: 3 mm Interface specification: 6 p black bending row needles explain】 VCC— external 2.5 V to 12 V voltage GND— external GND IA1— external microcontroller IO port IB1— external microcontroller IO port IA2— external microcontroller IO port IB2— external microcontroller IO port. 4 p green terminal instructions】 OA1 OB1 connecting DC motor 2 pin. No direction OA2 OB2 connecting DC motor 2 pin. No direction. Directions for use Connecting VCC. GND module power indicator lighting IA1 input high level. IA1 input low level, OA1 OB1】 motor forward; IA1 input low level. IA1 input high level, OA1 OB1】 motor reverse; IA2 input high level. IA2 input low level, OA2 OB2】 motor forward; IA2 input low level. IA2 input high level, OA2 OB2】 motor reverse. Packing List: 2Pcs L9110S Dual DC motor Driver Controller Board Module Payment 1.We accept Paypal only. 2.Please confirm your ebay shipping address is exact after payment. 3.If your purchased is more than £30.00. Please offer your phone number with shipping address. Delivery details 1.All item will be shipped by Airmail post within 1 business days. It takes approximately 15-25 days(USA.CA,AU,UK,DE)other country 15-35 days. 2.Express by EMS.It must add 25 USD shipping fee, it takes 5-10 workdays for delivery.If you need other Epxress(DHL,Fedex.UPS etc.please contact us to talk about shipping fee. 3.Once you purchase. Please DONOT leave negative, neutral feedback or open any case if you have not received item in 30 days, because we have mentioned the shipping time repeatedly. Contact us 新建网页 2 1.We offer retail and wholesale servi
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: 金东区, China The DRV8825 stepper motor driver carrier is the breakout board for TI's DRV8825 microstepping bipolar stepper motor driver. DRV8825 has adjustable current ... morelimit, overcurrent and overheat protection, and six microstep resolutions (down to 1/32 step).
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China L298N Dual H Bridge DC stepper Motor Driver Controller module Board for Arduino. Principle diagram: Features: Driver: L298N Dual H Bridge DC Motor Driver ... moreIC The terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board. The supply area Vs: 7V ~ 35V The peak current of driven part Io: 2A the terminal supply of area the logical part Vss: +5 V ~ +7 V(can take power within the board +5 V) the operating current range of the logical part: 0 ~ 36mA control signal input voltage range: Low:0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss enable signal input voltage range: Low: 0.3 ≤ Vin ≤ 1.5V(control signal is invalid) High: 2.3V ≤ Vin ≤ Vss(control signal active) Maximum power consumption: 20W(when the temperature T = 75 °C) Storage temperature: 25 °C ~ +130 °C Driver Board Size: 55mm* 49mm* 33mm(with fixed copper pillar and the heat sink height) Driver Board Weight: 33g Other Extensions: control of direction indicators. The logic part of the plate to take power interface. X-058. ● We only accept paypal payments. ● When we receive your payment. We will be help you arrange shipping in 2 working days. Weekends and holidays do not break) ● All our parcels are shipped via China Post.Can provide Following two Delivery mode： Airmail It takes about 15-25 days EMS(Express Mail Service) It takes about 7-14 days ● Buyer should expect to pay any amount charged by the government of bidder's country; this includes but not limited to duty& tax ● Shipping& handling fees are non-refundable. ● If you haven’t received the item in one month. We will refund to you.PLEASE INSPECT YOUR ITEMS WHEN THEY ARE RECEIVED） ● Once you receiving the item with satisfaction. Please leave us positive feedback, and 5 STAR DSR. Thank you! ● If you feel dissatisfied with the products receive. Please could you should first contact us using e-mail. Please do not impulsively give a Neutral or Negative feedback before giving us the opportunity to resolve you problem! Neutral and Negative feedback wi
Buy It Now
$23.75 Shipping Condition: New Location: Hoffman Estates, United States 3 pcs 270 oz-in stepper motors, NEMA23. NEMA23 270oz/in 2.8A 1/4" Dual Shaft Stepper Motor. This kit contains everything you need for three axis of motion. ... moreMach3 set up for kit and machine, Download here.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$238.00 Shipping Condition: New Location: China 1.5PC Nema34HS5435C-37B2 stepper motor 1600oz. in=10.5N.m 3.5A 151mm ,single shaft. 2.5 pc Stepper motor driver High Perfermance Stepper Driver DM860A ... moreUp to7.8A, 24-80VDC. Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$22.99 Shipping Condition: New Location: Hoffman Estates, United States 3-Axis NEMA23,34 Stepper Motor Upgrade Kit (1x 906oz/in, 2x570oz/in, 3 Stepper Drivers, etc) (120VAC/230VAC) 2PCS >NEMA23 570oz/in 5A Dual Shaft Stepper ... moreMotor (KL23H2100-50-8B) 1/4" shaft ( 6.35mm).
Buy It Now
$89.00 Shipping Condition: New Location: Denmark 1PCS Nema34 Stepper Motor 34HS9456 with 965oz-in holding torque, 5.6A,98mm,4 leads. 1PCS Stepper Driver DM860A with 7.8A replacing MD882. Nema 34 stepper ... moremotor Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China 1 5 Axis Professional Breakout Board + 3 EMA2-080A72 Microstep Motor Drivers. 5 Axis Professional Breakout Board. • Compatible with all the 2 phase, 3 ... morephase and 4 phase microstep drivers in the market.
Buy It Now
Free Shipping Condition: New Location: United States +4 x Nema24 3.3Nm/467 Oz-in 60BYGH100-401A Stepper Motors. The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency ... moreTB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
|
|
|
 |