|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: China Motor Drive Module DC Motor Driver 60A Dual Super Power H-bridge 60KHZ Switching Frequency Motor Driver for Robot Competition. When driving the motor, ... morethe maximum rated current of the module can reach 60A, and the on-resistance is only 0.003 ohms.
Buy It Now
$3.99 Shipping Condition: New Location: China When the Mach4 is working, unplug a USB cable and then plug it back in, the Mach4 can still be connected normally. MK4-M4 MACH4 4-Axis CNC Breakout Board ... more2000KHz USB Motion Card for Engravers Lathe Machines.
Buy It Now
$6.00 Shipping Condition: New Location: China MK4-V: 4 axis motion card works with Mach3 CNC system for all windows platform. Output frequency: 2000 KHZ (2MHz). Mach3 Port Position: P1 Port. - Fully ... moresupport all Mach3 version. - 16 general-purpose input, 8 output has speed function, the spindle actual speed Mach3.
Buy It Now
$3.00 Shipping Condition: New Location: China It could work under Mach4 software. The maximum step-pulse frequency is 2000 KHz. Now MK6-M4 is stronger, more stable and better performance than other ... moreversion. Support all versions of Mach4. Under Mach4 working state, USB cable unplugs and then plugs in, but also the normal connection.
Buy It Now
$3.99 Shipping Condition: New Location: China When the Mach4 is working, unplug a USB cable and then plug it back in, the Mach4 can still be connected normally. MK3-M4 MACH4 3-Axis CNC Breakout Board ... more2000KHz USB Motion Card for Engravers Lathe Machines.
Buy It Now
Free Shipping Condition: New Location: United States 1 PC Nema 34 stepper motor single shaft 85BYGH450C-060 with 12N. m 1700oz-in holding torque 6A. 2PCS Nema 23 Stepper Motor with Single shaft 425oz-in ... moreHolding torque. 1PC CNC Stepper Driver DQ860MA with 7.8A peak current, 256 Microstep, 24-80VDC;.
Buy It Now
$189.00 Shipping Condition: New Location: China 1.4PCS Nema34HST9805-37B2 stepper motor 878oz. in=7.0N.m 2A 98mm ,single shaft. 1.Nema34HST9805-37B2 stepper motor 878oz. 2.4PCS Stepper motor driver ... moreHigh Perfermance Stepper Driver DM860A Up to7.8A, 24-80VDC.
Buy It Now
$43.00 Shipping Condition: New Location: China 1 pc Nema 23 stepper motor with 425 oz.in single shaft 23HS9430. Hording torque when DM542A run under high speed is also significantly higher than the ... moreother two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$3.99 Shipping Condition: New Location: China MK4-V: 4 axis motion card works with Mach3 CNC system for all windows platform. Mach3 Port Position: P1 Port. - Fully support all Mach3 version. - 16 ... moregeneral-purpose input, 8 output has speed function, the spindle actual speed Mach3.
Buy It Now
$3.99 Shipping Condition: New Location: China When the Mach4 is working, unplug a USB cable and then plug it back in, the Mach4 can still be connected normally. - Its status indicators can indicate ... morevarious statuses, including USB connection status, Mach4 connection status and running.
Buy It Now
$2.69 Shipping Condition: New Location: China CNC turntable support. Single-step mode, the user can set the processing task to be executed to single-step mode, which provides good support for error ... morediagnosis and fault recovery. 1x Parallel Cable.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Holding torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. Stepper motor driver. Great News from Longs motor!
Buy It Now
$1.00 Shipping Condition: New Location: China Support for connecting electronic handwheel. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;. 4 general-purpose ... moreinputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
Buy It Now
$3.00 Shipping Condition: New Location: China It is the new 3-axis Mach3 motion card. - 1 x Mach3 Motion Card. Download the latest version of Mach3 - Axis Backlash: YES. - Axis output number: 3 Axis ... more(high-speed optocouplers). - Slave Axis(Dual X/Y/Z): NO.
Buy It Now
$3.99 Shipping Condition: New Location: China It could work under Mach4 software. The maximum step-pulse frequency is 2000 KHz. Now MK3-M4 is stronger, more stable and better performance than other ... moreversion. Support all versions of Mach4. Under Mach4 working state, USB cable unplugs and then plugs in, but also the normal connection.
Buy It Now
$20.00 Shipping Condition: New Location: Hoffman Estates, United States DB25 Input: P10 P11 P12 P13 P15. DB25 Output: P2 P3 P4 P5 P6 P7 P8 P9 P14 P1 P16 P17. 4 pcs Nema 17, 23,34 Stepper Motor Driver 24-50VDC 1.5A-4.2A (KL-5042E). ... more1 pc Breakout Board (KL-DB25) & 1 pc M to M Parallel Cable.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Ship from German warehouse! 3AXIS Nema34 Stepper Motor 1600oz-in 3.5A& driver CNC Router or Mill Great News for European customers! Our products are ... moreshipped from German warehouse directly. after payment. Within 3 ~5 business days for receiving products! Easy to custom clerance, no damage, better service, please don't hesitate! What's in Box? 3 PCS Nema 34 Stepper Motor with Single shaft 1600oz-in holding torque, 3 PCS Stepper Driver DM860A with 7.8A replacing MD882, 3PCS Power Supplies for 35 0W.60VDC, 1 PC Breakout Board, 1 PC DB25 Cable 1.Nema 34 stepper motor: Model Step angel( °) Motor Length L(mm) Rate Voltage(V) Rate Current(A) Phase Resistance( Ω) Phase Inductance(mH) Holding Torque(oz.in) Lead Wire(NO. Rotor Inertia(kg. c? Motor Weight(kg) 34HS5435C-37B2 1.8 151 5.7 3.5 1.9 22 1600 4 3.6 5 2.Stepper motor driver: Detailed pic: Technical Specification: 1. Stepper motor driver DM860A: Http:www.longs-motor.com/ProductsView.asp?id=273&pid=83 Introduction: DM860A is a type of two-phase hybrid stepping motor driver. The drive voltage of which is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter and less than 8.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on. Features: L High performance. Low price. L Average current control. 2-phase sinusoidal output current drive. L Supply voltage from 24VDC to 80VDC. L Opto-isolated signal I/O. L Overvoltage. Under voltage, overcorrect, phase short circuit protection. L 14 channels subdivision and automatic idle-current reduction. L 8 channel
Buy It Now
Free Shipping Condition: New Location: United States Latest News: Congratuation! Our company Longs Motor has an warehouse in Germany from September.2012. And this item will be shipped from local Germany ... morewarehouse to European Union Country by DHL. This will help EU customer to save lots of shipping time& avoid paying import taxes. www.longs-motor.com This item includes: 1. 3 pcs Nema 34 stepper motor 1600 oz.in bipolar with dual shaft 2. 3 pcs Stepper motor driver. DM860A, peak 7.8A,256 Micsteps,replacing M860 3. 3pcs Power Supply 350W-60VDC 4. 1 pc Breakout Board& 1 pc parallel cable More quatities. More discounts! Detailed information: 1. Nema 34 stepper motor: Model Step angel( °) Motor Length L(mm) Rate Voltage(V) Rate Current(A) Phase Resistance( Ω) Phase Inductance(mH) Holding Torque(oz.in) Lead Wire(NO. Rotor Inertia(kg. c? Motor Weight(kg) 34HS5435C-02B2 1.8 151 5.7 3.5 1.9 22 1600 4 3.6 5 2.Stepper motor driver-DM860A: Detailed pic: 1. Stepper motor driver DM860A: Introduction: DM860A is a type of two-phase hybrid stepping motor driver. The drive voltage of which is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter and less than 8.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on. Features: L High performance. Low price. L Average current control. 2-phase sinusoidal output current drive. L Supply voltage from 24VDC to 80VDC. L Opto-isolated signal I/O. L Overvoltage. Under voltage, overcorrect, phase short circuit protection. L 14 channels subdivision and automatic idle-current reduction. L 8 channels output phase current s
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. Stepper motor driver DM542A 3 pcs Nema 23 stepper motor 435 oz.in bipolar 23HS9442.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 3 pcs Nema 34 stepper motor with dual shaft, 1600oz. in, biloar. 3 pcs Stepper motor driver, peak 7.8A 24-80VDC. Nema 34 stepper motor Hording torque ... morewhen DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$25.95 Shipping Condition: New Location: Hoffman Estates, United States For sale here is a 4-Axis NEMA23 CNC Kit (36V/9.7A/ 425 oz-in/ KL4030). This kit contains everything you need for four axis of motion. Mach3 set up for ... morekit and machine, Download here. Mach3Tutorial (193486).
Buy It Now
$3.00 Shipping Condition: New Location: China It is the new 3-axis Mach3 motion card. - 1 x Mach3 Motion Card. Download the latest version of Mach3 - Axis Backlash: YES. - Axis output number: 4 Axis ... more(high-speed optocouplers). - Slave Axis(Dual X/Y/Z): NO.
Buy It Now
$5.00 Shipping Condition: New Location: China Output frequency:2000 KHZ (2MHz). Applications: MK4-V:4 axis motion card works with Mach3 CNC system under all windows platform. Mach3 Port Position: ... moreP1 Port. - Fully support all Mach3 version. - 16 general-purpose input,8 output has speed function,the spindle actural speed Mach3.
Buy It Now
$15.00 Shipping Condition: New Location: Hoffman Estates, United States 4 pcs Digital Stepper Drive 20-40VDC 0.5-4.2A for Nema 17, 23, 24 Stepper Motor (KL-4042D). DB25 Input: P10 P11 P12 P13 P15. DB25 Output: P2 P3 P4 P5 ... moreP6 P7 P8 P9 P14 P1 P16 P17. 1 pc Breakout Board (KL-DB25) & 1 pc M to M Parallel Cable.
Buy It Now
$227.00 Shipping Condition: New Location: China Stepper motor driver: DM2722A. 3 pcs Nema 42 stepper motor 4120 oz.in, 8.0A, 4 leads, bipolar 42HS6480. Nema 42 stepper motor. Stepper driver working ... morecurrent is set by DIP-1 switches. l Drive current is adjustable in 16 channels from 1.2A/phase to 7.0A/phase.
Buy It Now
$45.00 Shipping Condition: New Location: United States 1 PC Stepper Driver with 4.2A DQ542MA digital series replacing M542. It is designed for use with 2-phase hybrid stepper motor of all kinds with. 4.0A ... morephase current. Hording torque when DQ542MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: United States Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. Stepper motor driver DM860A The following is a typical system wiring diagram.
Buy It Now
Free Shipping Condition: New Location: Kansas City, United States Feature: This USB motion card does not need install any USB driver, Windows2000/XP/Windows7,can directly identify. 4-axis linkage, Maximum step-pulse ... morefrequency: 100KHz, support connect four stepper motor drives or servo drives.
Buy It Now
Free Shipping Condition: New Location: United States Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. Stepper motor driver DM860A The following is a typical system wiring diagram.
Buy It Now
$15.00 Shipping Condition: New Location: Hoffman Estates, United States 3 pcs Digital Stepper Drive 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor (KL-5042E). 3 pcs Nema 23 270oz/in 2.8A Stepper Motor 1/d" Dual Shaft ... more(KL23H276-28-4B). KL23H276-28-4B Stepper Motor. It can be used invarious kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labelingmachines, and so on.
Buy It Now
$78.00 Shipping Condition: New Location: China 3 pcs Nema 23 stepper motor 425 oz.in bipolar. Inductance: 6.8 mH/phase. Nema 23 stepper motor Hording torque when DM542A run under high speed is also ... moresignificantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: China The driver board can drive hard disk brushless motors ,CD-ROM brushless motor and so on, the micro 3-wire or 4-wire. Without hall brushless motor . 2S ... more7-15A Micro Brushless Motor Drive Brushless Electric Regulator Switch.
Buy It Now
$5.00 Shipping Condition: New Location: China It could work under Mach4 software.The maximum step-pulse frequency is 2000 KHz. Now MK4-M4 is stronger, more stable and better performance than other ... moreversion. Support all versions of Mach4. Under Mach4 working state, USB cable unplugs and then plugs in, but also the normal connection.
Buy It Now
$3.00 Shipping Condition: New Location: China Output frequency:2000 KHZ (2MHz). Applications: MK6-V:6 axis motion card works with Mach3 CNC system under all windows platform. Mach3 Port Position:P1 ... morePort. - Fully support all Mach3 version. - 16 general-purpose input,8 output has speed function,the spindle actural speed Mach3.
Buy It Now
$8.00 Shipping Condition: New Location: China It could work under Mach4 software.The maximum step-pulse frequency is 2000 KHz. Now MK4-M4 is stronger, more stable and better performance than other ... moreversion. Support all versions of Mach4. Under Mach4 working state, USB cable unplugs and then plugs in, but also the normal connection.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. Stepper motor driver--DM860A Stepper motor driver DM860A.
Buy It Now
$72.00 Shipping Condition: New Location: China Iver DM420A, peak 2.83A, 128 micstep. 4 pcs Nema 17 stepper motor with 52 oz. cm,4 leads, 1.7A. Nema 17 stepper motor The following is a typical system ... morewiring diagram. Application: Our Stepper Motors are used on small to mid-sized CNC mills or milling machines, CNC lathes, Pick-n-place machines, Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters.
Buy It Now
Free Shipping Condition: New Location: China CNC turntable support. Single-step mode, the user can set the processing task to be executed to single-step mode, which provides good support for error ... morediagnosis and fault recovery. 1x Parallel Cable.
Free Shipping Condition: New Location: China Install GRBL 1.1 firmware. 12V 450NM 5.5W Blue Laser Driver Board TTL Driver Board DIY CNC Laser Engraver. 15W 450nm Laser Driver Board with TTL for DIY ... morelaser engraver 15W Laser Module. PWM Adjustable Board Module LCD Display Signal Generator Pulse Frequency Module.
Buy It Now
$3.00 Shipping Condition: New Location: China 1 x Mach3 Board. - Maximum step-pulse frequency is 100KHz, which is suitable for servo and stepping motor. - 1 x USB Cable. - 1 status LED to indicate ... moreconnection status on the board. - It supports 4-axis linkage and you can connect it to four stepper motor drives or servo drives.
Buy It Now
Free Shipping Condition: New Location: China 3 Axis Nema 34 stepper motor 1600 oz.in & Driver &Power. 3 pcs Nema 34 stepper motor 1600 oz.in bipolar with single Shaft. Nema 34 stepper motor Hording ... moretorque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$3.00 Shipping Condition: New Location: China Support for connecting electronic handwheel. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;. 4 general-purpose ... moreinputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
Buy It Now
$39.95 Shipping Condition: New Location: Hoffman Estates, United States So you do not need any Breakout Board, Ethernet Board. You do not need to wire them any more. EtherCAT Stepper Driver, KL-5056E-C. EtherCAT Compare with ... moreStep/Direction. EtherCat Nema 23 Kits for CNC Machine (No Breakout Board and Ethernet board).
Buy It Now
$35.00 Shipping Condition: New Location: China Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is ... morealso higher. Stepper motor driver--DM542A. Wrong connection of stepper motor.
Buy It Now
$47.95 Shipping Condition: New Location: Hoffman Estates, United States So you do not need any Breakout Board, Ethernet Board. You do not need to wire them any more. EtherCAT Stepper Driver, KL-8082E-C. EtherCAT Compare with ... moreStep/Direction. EtherCat Nema 23 Kits for CNC Machine (No Breakout Board and Ethernet board).
Buy It Now
$2.29 Shipping Condition: New Location: China TMC2209 V1.2 Stepper Motor Driver DC 4.75-28V 2A 3D Printer Parts for BTT SKR. DC 8-30V 2.5A DRV8313 Simple FOC Mini DC Brushless Motor Driver Board. ... moreProtectiveCover Doorbell Silicone Protective Cover For Google Nest hellodoorbell.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: United States 3 PCS Wantai Stepper Driver DQ860MA with 80VDC,7.8A, 256 Microstep. The DQ860MA is an economical microstepping driver based on patented technology of ... moreWantai Motor. It is suitable for driving 2-phase 4-phase hybrid stepping motors.
Buy It Now
Free Shipping Condition: New Location: United States DIY TB6600HG Stepper Driver CNC Kit 3 Axis Nema24 Stepper Motor Display& Handle +3x Nema24 4Nm/567 Oz-in GB24H2100-42-4A Stepper Motors +2x 360W 36V10A ... moreSwitching Power Supply +3x TB6600HG Microstep Drivers The latest 3rd generation breakout board has been upgraded to the intelligent. Professional and industrial-level interface board set by re-designing the PCB board, embedding intelligent memory chip(professional version) and upgrading the external manual control tools(control pad and display panel) The re-designing the PCB board will make the breakout board control the microstep drivers more smoothly with lower noise. Actually, the 3rd generation breakout board set has two types of versions, one is the standard version. And another is the professional version. Compare to the standard version. The professional version mainly has two more functions than the standard version, one is the" computer G-code recording function" And another is the" manual programing function" Except these two functions. These two types of versions have no other differences. With the embedded intelligent memory chip. The professional version of this 3rd generation 5 Axis breakout board can easily record MAXIMUM 4 Axis' X, Y, Z, A Axis) G-code running on the CNC software( e.g. Mach3. EMC2, KCAM4, etc. of the computer. And then rerun the recorded G-code to make the stepper motor work without the computer any more. The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover. The brand new design with BiCD0.13(45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps. All the 2 Phase or 4 Phase of Nema17. Nema23, Nema24 and Small-sized Nema34 stepper motors will work perfectly with this new-type TB660
Buy It Now
$3.99 Shipping Condition: New Location: China When the Mach4 is working, unplug a USB cable and then plug it back in, the Mach4 can still be connected normally. - Its status indicators can indicate ... morevarious statuses, including USB connection status, Mach4 connection status and running.
Buy It Now
$3.99 Shipping Condition: New Location: China Handwheel interface: support. - Applicable software: Mach3. - Number of axes: 4 axes (XYZ axes and a rotation axis). - Pulse rate: 200K max (per axis). ... more- Its transmission distance is farther than that of USB motion card.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Great News from Longs motor! 3 pcs Nema 23 stepper motor 425 oz.in bipolar 23HS9430. Nema 23 stepper motor Stepper motor driver DM542A Hording torque ... morewhen DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Latest News: Congratuation! Our company Longs Motor has an warehouse in US from September.2012. Great News! SHIP FROM USA WAREHOUSE! for 2nd Anniversary ... morePromotion for US warehouse just for USA BUYERS， Only 15 sets for Promotion! This item includes: 3pcs Dual shaft Nema 34 stepper motor.878oz. in,bipolar 3pcs Stepper motor driver DM860A. Peak 7.8A, 256 Micsteps 3pcs Power Supply 200Watts 60VDC 1 pc Breakout Board& Parallel cable( free offering when you buy all above) Detailed information. 1. Nema 34 stepper motor: Model Step angel( °) Motor Length L(mm) Rate Voltage(V) Rate Current(A) Phase Resistance( Ω) Phase Inductance(mH) Holding Torque(oz.in) Lead Wire(NO. Rotor Inertia(kg. c? Motor Weight(kg) 34HST9805-02B2 1.8 98 6.4 2 3.2 15 878 8 1.7 3 2.Stepper motor driver: Detailed pic: Technical Specification: 1. Stepper motor driver DM860A: Introduction: DM860A is a type of two-phase hybrid stepping motor driver. The drive voltage of which is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter and less than 8.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on. Features: L High performance. Low price. L Average current control. 2-phase sinusoidal output current drive. L Supply voltage from 24VDC to 80VDC. L Opto-isolated signal I/O. L Overvoltage. Under voltage, overcorrect, phase short circuit protection. L 14 channels subdivision and automatic idle-current reduction. L 8 channels output phase current setting. L Offline command input terminal. L Motor torque is related with speed.
Buy It Now
$1.95 Shipping Condition: Brand New Location: China Features: 1. Fully support of MACH3 and other computer software support for parallel port control. 2. USB power supply and peripherals powered phase separation ... moreto protect computer security. 3. Peripheral wide voltage input,12-24V, and anti-reverse function. 4. All of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security. 5. All the way to the relay output port, control spindle switch. Output port P17 mouth. 6. All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port. 7. Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled. 8. P1 as PWM outputs can be controlled with optocoupler input spindle governor. 9. Can be accessed by a common cathode or common anode input level to 5V drive. Package included: 100% Brand New 1X 5 Axis Breakout Board 1X USB cable PayPal only. Only ship to PayPal confirmed address. All items are shipped via HK Air Mail Service within 48 Hours once payment's fulfilled. Buyers are responsible for any customs duties if applicable. Normally item will arrive in 10-20 days. Sometime a bit delayed. If item is defective upon receipt. Customer has up to 14 days from date of receipt for an exchange or refund. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. If you need to return. Please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. If you’re in any way dissatisfied with your purchase. Let me know through" MY MESSAGES" or"AskSeller Q"or our mailbox. We will solve it for you. We are committed to ensuring that you are completely satisfied with every transaction.100% Satisfaction guaranteed! We will reply your mail within 24 hours normally. sometimes have a little delay due to the weekends or ho
Buy It Now
$8.00 Shipping Condition: New Location: China It could work under Mach4 software. The maximum step-pulse frequency is 2000 KHz. Now MK3-M4 is stronger, more stable and better performance than other ... moreversion. Support all versions of Mach4. Under Mach4 working state, USB cable unplugs and then plugs in, but also the normal connection.
Buy It Now
$1.99 Shipping Condition: New Location: China 1PC MACH3 Interface Board. The output interface. The output interface is P1. Cable length:Approx.130 cm. 1PC USB Cable. Equiped with anti-reverse connection ... morefunction.
Buy It Now
$1.95 Shipping Condition: Brand New Location: China 1 x Adapter Breakout Board. The output port is P17 port. The output port is P1 port. Connectors: USB(Female)+25PIN(Male).
Buy It Now
$3.59 Shipping Condition: New Location: China New CNC MACH3 USB 6 Axis Interface Breakout Board Adapter For Stepper Motor Driver#A145A. Click To Enlarge MACH3. CNC software for mainframe computers ... moreand peripheral power control signal transfer and processing. Feature 1, all output and input models by Philips dedicated high-speed chip processing. The signal is an integer, amplification, eliminating unnecessary interference signal. The operation of the machine more stable. 2. USB and external power supply. The power supply isolation. Computer and data processing machines more secure 3, all of the input signal by the optical coupling isolation all of which P11. P12 port for high-speed optical coupling can be used to connect the spindle encoder, or hand- wheel A. B equal to demanding signal. 4, there is a special off the total electric power supply of the relay, the computer shuts down automatically when carving machine with other equipment, turn off all power. 5, there is a special relay switch coolant supply, support MACH3. G code programming( parallel port P3. G code to open M8. M9 off) the relay switch on the lights. Easy to determine the power off. 6, there is a spindle-powered ad hoc relay support MACH3. G code programming( parallel port P2 I. G to open the code M3. M2 off) the relay switch on the lights. Easy to determine the power-off 7. On the spindle speed control: special high-speed optical coupling isolation, can output PWM signal output for the parallel port P1. 8, the interface board have a PWM to 0-10V digital-analog conversion circuit. Can output 0-10V level to control the market and control the speed of only analog converter. To control the spindle speed. Output for the parallel port P1. 9. The interface board can be connected common cathode or common anode output to the stepper drive or servo drive. Output for the 5V level. 10. Wide voltage power supply, 12V or 16-35V can choose a set of two power supply. Reversed with anti- power input design. 5 input port： Port description P10 X limit P11 on the knife P
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China 1 5 Axis Professional Breakout Board + 3 EMA2-050D56 Microstep Motor Drivers. This function is widely applied in RBI machine, Conveyor etc. • Compatible ... morewith all the 2 phase, 3 phase and 4 phase microstep drivers in the market.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China This function is widely applied in RBI machine, Conveyor etc. EMA232-7630S4 Nema23 Stepper Motor. Stepper motors and drivers from ENGMATE. ™ 3 Axis Kit ... morefor CNC DIY. 5 Axis Professional Breakout Board.
|
|
|
 |