Shank Tec Hss Morse Mts Hss Milling Slitting Drills Drillbits Hss Morse Mts 2 Mts 3 Shank Od Spiral Flutes 1 Mts 2 Machine Round Shank Reamer Straight Flutes Reamer Spiral Flutes Reduced Shank Od Die Button Hss Hand Tap 2 Split Die Button Screw Shank 16 Tpi Bsw 1 Bsp 1 Hss Morse Mts 4 Drill Parallel Die Nut Drill Drillbits Hand Tap Bsp Hss Machine Tap Unf Hand Tap Unc Flutes 7 Hand Tap Bsw Hss Milling Hss Morse Mts 3 Drill Drillbits Machine Shank Wt 1 4 Screw Hss-Co Chucking Tpi 14 3 Flutes Helical Flutes Shank Tap Tap Bsf Quality Hss Split Button Die Reduced Shank Od 1 2 Annular Cutter 1 4 Tpi Annular Magnetic Drill 1 2 Tpi Slitting Saw Hss Mts Morse 1 Drill Drillbits Morse Mts 3 Drill Drillbits 1 Parallel Reamer Spiral Flutes 1 Slotted Boring 16 X 1 1604 2 Flutes 4 Flutes 4 X 1 60 Degree Cutter 60 Degree End Mill 8 X 1 Acme Inserts Annular Cutter Set Apkt Ball End Mill Set Bench Grinder Wheel Boring Id Burr Burr Set Carbide Carbide Burr Carbide Drill Carbide End Mill Lot Carbide Insert Holder Ccmt 21.51 Center Drill Center Punch Chucking Reamer Cnmg Cnmg 432 Cnmg 643 Cohss End Milling Cohss End Milling Endmill 4 Flutes Coolant Corner Rounding End Mill Counterbore Set Countersink Countersink 82 Cut Off Wheels Cutoff Blade Cutter 3 Cutter Saw 2 Deburring Deburring Tool Diamond Grinding Wheel Drill Bit Emuge End Mill Lot End Mill Set Engraving Cutter Flutes 1 Fly Cutter Gleason Grinding Wheel Hand Reamer Hand Tap Horizontal Band Saw Horizontal Mill Cutters Hougen Hougen Cutters Hss Involute Gear Milling Cutter Hss Milling Slitting Slotted Cutter Indexable Indexable End Mill Iscar Dgn Iscar Drill Kennametal Keyseat Cutter Lathe Cutting Bits Lathe Threading Tool Lathe Tooling Lathe Tooling Lot Lngx Lot Micro 100 Milling Milling Cutter Milling Cutter Lot Mts 2 Drill Drillbits Niagara End Mill Od 1 Od 2 Od 3 Osg Parting Blade Parting Tool Radius Cutter Reamers Roloc Rotabroach Rotary File Roughing End Mill Sandvik Cnmg644 Scrap Carbide Sekr Shell Mill Slotted Boring Slotted Drill Solid Carbide Boring Bar Spot Drill Tap 1 Taper Inter Bottoming Tapping Taps Tcmt 21.51 Thread Mill Thread Shank Threading Tool Tool Tool Bits Tpg Tpg 222 Tpg 322 Vbgt Wcmx Woodruff Woodruff Cutter Wt 1 Z Carb Counter Bore Wnmg Hss Hand Parallel Reamer Spiral Flutes Ball End Mill Osborn Nachi Carbide Inserts Hss Morse Mts 4 Drill Drillbits Carbide Endmill Dovetail Cutter Lathe Cutter Die Handle
 In 
 
Categories
Order by: 
Available to: 
Price: 
 - 
This site contains affiliate links for which I may be compensated
F&D Tool Company 12429-C332R Corner Rounding Cutters, 3/4 " Radius, 4.25" Dia
$
275.00
Buy It Now
$11.00 Shipping
Condition: New
Location: Lakewood, United States
Solid Carbide Inner Corner Radius Rounding Milling Cutter R0.25-R6 2-Flute 55D
$
110.39
Buy It Now
$1.24 Shipping
Condition: Brand New
Location: China
Number of Flute:2. For cutting Ordinary Steel,Hard Steel,Heat Resistant Steel,Stainless Steel,Ti Alloy,etc.
Tungsten Corner Radius Milling Cutter High Performance for Aluminum 9mm-20mm 55D
$
66.76
Buy It Now
$1.24 Shipping
Condition: Brand New
Location: China
For cutting Aluminum,Ordinary Steel,Hard Steel,Heat Resistant Steel,Stainless Steel,Ti Alloy,etc.
2.360" x 7/16" 6 Flute Carbide Tipped Milling Cutter M787309
$
58.72
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Overall Length 6". Added flat to shank.
03170222 Convex Radius Cutter 11/32" x 2-3/4" x 1" HSS 12T
$
24.05
Buy It Now
$3.00 Shipping
Condition: New
Location: Saint Louis, United States
Credit Card or Debit Card.
Tool CUTTER BACK RADIUS 5/32 R CONVEX .4675” DIA WOODRUFF CUTS CONCAVE 4” OAL
$
35.15
Buy It Now
$7.55 Shipping
Condition: New – Open box
Location: Astoria, United States
BACK RADIUS IS CONVEX ON CUTTER CUTS CONCAVE ON PART. NECK. 244 DIA. PRICE IS FOR 1 ==> BOTH SHOWN. HS 20 or HS 21.
TMX HSS Concave Radius Shank Cutter 3/32 x 1/2 - 5-693-015
$
69.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Boaz, United States
HARVEY TOOL Carbide Dovetail Cutter, 20°, 1/2″ Cut Dia, .010 Radius, 16432-C3
$
69.99
Buy It Now
Free Shipping
Condition: New
Location: Woodruff, United States
HARVEY TOOL Carbide Dovetail Cutter, 20°, 1/2″ Cut Dia, .010 Radius, MPN 16432-C3. New with original packaging. USPS shipping 1/2” cutting diameter 20° ... moredovetail .010 corner radius 3 flute AlTiN coated 1/2” shank Solid carbideUSA made Multiple units available, packaging may vary
1/2" x 1/8" Carbide Head 45 Degree Single Angle Cutter .030" Radius MF4461267
$
23.42
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Angle 45 Degree (45 Degree Angle cuts to 3/8"). Radius. 030" +/-.005" (Blends to 45 Degree Angle). Shank 3/8". Added Flat to Shank.
HARVEY Carbide Keyseat Cutter, 1/2” Diameter x 1/8” Width, 1/16” Radius, AlTiN
$
69.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Woodruff, United States
HARVEY TOOL Carbide Keyseat Cutter. New old stock with original packaging. Tool remains in excellent unused condition. The packaging has wear and scuffs. ... moreUSPS shipping Head diameter - 1/2” Head width - 1/8”Radius - 1/16”6 flute AlTiN Coated 1/2” shank Solid carbideUSA made MPN - 67962-C3
2pcs Solid Carbide ALTiN Coated Corner Radius End Milling Cutter 1.5-4mm 4-Flute
$
10.90
Buy It Now
Free Shipping
Condition: Brand New
Location: China
Number of Flute:4. For cutting Iron,Ordinary Steel,Heat Resistant Steel,Stainless Steel, Ti Alloy,etc.
NEW Poland Corner Rounding Milling Cutter L.H. 5/16” Radius 2-3/4” D. x 1” Arbor
$
17.00
Buy It Now
$6.70 Shipping
Condition: New – Open box
Location: Gulfport, United States
NEW Poland Corner Rounding Milling Cutter L.H. 5/16” Radius 2-3/4” D. x 1” Arbor. Combined shipping available. Thanks for looking.
Value Collection 3/32" Radius, 3/16" Circle Diam, 7/8" Cutter Diam, Shank Con...
$
55.05
Buy It Now
Free Shipping
Condition: New
Location: Melville, United States
Value Collection 3/32" Radius, 3/16" Circle Diam, 7/8" Cutter Diam, Shank Connection, Convex Radius Cutter 1/2" Shank Diam, 3" OAL, High Speed Steel, ... moreUncoated, 6 Teeth, Weldon Flat
Harvey Tool 3/16" Wide Full Radius 1/2" Diameter Carbide Keyseat Cutter .250" NL
$
95.90
Buy It Now
Free Shipping
Condition: New – Open box
Location: Chillicothe, United States
If you reach out to us, we are mor than happy to fix any problems that may arise. Harvey Tools. Check out the pictures and item specifics for more details. ... moreThis is an open box item. It is new and never used.
Surrey 20-445-35016-RH Carbide Radius Cutter 4049173 R2 2044535016RH 74x31 5x33
$
76.75
Buy It Now
Free Shipping
Condition: New
Location: Rochester, United States
Can’t find a part you’re looking for?.
4-1/4" HSS Concave Milling Cutter 1-1/4" Shank 1" Corner Radius
$
173.99
Buy It Now
Free Shipping
Condition: New
Location: Farmington, United States
HIGH SPEED STEEL CONCAVE MILLING CUTTER. •Concave Milling Cutters •High Speed Steel. Style Concave Cutting Edge Material HSS.
4" x .35" x 1" HSS Side Milling Cutter Convex Radius
$
38.99
Buy It Now
$5.99 Shipping
Condition: New – Open box
Location: Middlebury, United States
Need it urgently?. Call us and we will do what we can to get it to you quickly. We choose the carrier. Unless otherwise specifically agreed to in writing ... moreby. Prefer to pick it up yourself?. LOCAL PICK-UP.
CONTROX COBALT RADIUS CUTTER 3/16 X 7/8 X 5/16 MODEL 235065 LOC3471
$
35.00
Buy It Now
Free Shipping
Condition: New
Location: Troy, United States
MODEL NUMBER; 235065. RADIUS 3/16. SMALL DIA; 5/16.
FORM CUTTER .250 X .150 X .030 RADIUS X .020 RADIUS INTERNATIONAL TOOL ..USA
$
19.97
Buy It Now
$4.95 Shipping
Condition: New
Location: Columbia, United States
( 1 ) NEW INTERNATIONAL TOOL SPECIAL FORM CUTTER.
CONVEX 1/32" RADIUS CUTTER 3/4" x 1/16" WIDE HSS USA
$
40.00
Buy It Now
$6.00 Shipping
Condition: New
Location: Painesville, United States
MADE IN USA. HIGH SPEED STEEL.
TTC Concave Radius Shank Cutter 1/16r x 1/2shk - 10-271-722
$
59.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Boaz, United States
1" x .104" Carbide Head Key Seat Cutter .010" Radius MF44612520
$
20.88
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Added Flat to Shank. Radius. 010" +/-.005" (2 Places). Shoulder. 820".
1/4" Radius Cutter Corner Rounding END MILL High Speed Steel 1/4x1/2
$
49.95
Buy It Now
Free Shipping
Condition: New
Location: North Las Vegas, United States
Corner Rounding End Mill. 1/4" Radius Cutter.
3/8" x .049" Carbide Head Key Seat Cutter .0175" Radius MF44612538
$
17.66
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Radius. 0175" +/-.0025" (2 Places). Shoulder. 300".
1" x .070" HSS Key Seat Cutter .0075" Radius MF446056
$
19.64
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Radius. 0075" +/-.0025" (2 Places). Shoulder Relief. 870" +/-.005".
Promax Radius Cutter Corner Rounding END MILL Carbide
$
40.00
Buy It Now
$4.00 Shipping
Condition: Used
Location: North Grosvenordale, United States
NEW! Promax.015" Carbide Corner Radius Cutter. Part Number 137-00820. MSC Part Number 01120500. Specifications include: 1/8" shank, double end, ... more2 flutes, and 1 1/2" overall length. Listing is for 1 piece. Save and combine shipping with other purchases from gracies_stuff!
***NEW*** -- Niagra 5/16" Radius Cutter Corner Rounding END MILL HSS
$
60.00
Buy It Now
$8.00 Shipping
Condition: New – Open box
Location: North Grosvenordale, United States
New Niagara 5/16 corner rounding cutter.
Round Radius Milling Cutter 2 3/4" DIA. X 5/8"-CD x 1" .239 Rake HSS J7
$
35.00
Buy It Now
$6.00 Shipping
Condition: Used
Location: Manitowoc, United States
2 3/4" x 5/8"CD-1" HSS USA J7. Round Radius Cutter-.
1" x .036" Carbide Head Key Seat Cutter .010" Radius MF44612542
$
24.74
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Added Flat to Shank. Radius. 010" +/-.003" (2 Places). Shoulder Relief. 900" +/-.005".
Toolmex (5700145) 13/16" Radius, 5-1/2" Diam, 12 Teeth HSS Convex Radius Cutter
$
899.95
Buy It Now
Free Shipping
Condition: New
Location: Farmington, United States
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications for both ferrous and nonferrous materials. ... moreNumber of Teeth 12. Our 1st ID was "tcitytrans" which is still active.
1" x .240" HSS Key Seat Cutter .075" End Radius .015" Inside Radius MF4460340
$
24.35
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Inside Radius. 015" +/-.05". End Radius. 075" +/-.005".
.625" x .036" HSS Key Seat Cutter Full Radius MF446049
$
18.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Full Radius. Shoulder. 550" +/-.005".
Niagra 5/16" Radius Cutter Corner Rounding END MILL HSS
$
45.00
Buy It Now
$8.00 Shipping
Condition: Used
Location: North Grosvenordale, United States
Niagara 5/16 corner rounding cutter. Great shape
Harvey .1250" x .0150" Carbide Keyseat Cutter .0075" Radius 1/8" 67507-C3
$
44.95
Buy It Now
Free Shipping
Condition: New
Location: East Jordan, United States
W/. 0075" Radius. On orders before 1pm EST M-F.
1/2" x 1/4" HSS Key Seat Cutter .020" Radius MF4460318
$
20.27
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Added Flat to Shank. Radius. 020" +/-.005" (2 Places).
FORM CUTTER .187 X .150 X .030 RADIUS X .020 RADIUS INTERNATIONAL TOOL ..USA
$
19.97
Buy It Now
$5.92 Shipping
Condition: New
Location: Columbia, United States
( 1 ) NEW INTERNATIONAL TOOL SPECIAL FORM CUTTER. MADE IN USA.
🗽RADIUS CUTTERS 3/16, 5/32,& 5/64 THREE PIECE SET
$
19.50
Buy It Now
$7.25 Shipping
Condition: Used
Location: Madison, United States
🗽RADIUS CUTTERS 3/16, 5/32,& 5/64 THREE PIECE SET(B44-61)
HARVEY Carbide Keyseat Cutter, 1/2” Diameter x 1/4” Width, .030 Radius, AlTiN
$
79.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Woodruff, United States
HARVEY TOOL Carbide Keyseat Cutter. New old stock with original packaging. Tool remains in excellent unused condition. The packaging has wear and scuffs. ... moreUSPS shipping Head diameter - 1/2” Head width - 1/4” Radius - .030”Neck - 3/4” 8 flute AlTiN Coated 1/2” shank Solid carbideUSA made MPN - 969180-C3
25/32" x .252" HSS Modified T-Slot Cutter .025" Inside Radius MF446013
$
26.10
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Inside Radius. 025" +/-.005".
.353" x .172" Carbide Key Seat Cutter .020" Radius MF446032
$
20.89
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Radius. 020" +/-.005" (2 Places).
SHELL FACE MILL 3-1/2" A-1626 F&D 1/8" Radius 1-1/4" Bore RH HSS NOS U.S.A.
$
39.00
Buy It Now
$10.00 Shipping
Condition: New – Open box
Location: Hamburg, United States
Box is worn out and cutter has mild small bits of surface rust (see pics) but is razor sharp, never used, 100% functional.
1" x .058" Carbide Head Key Seat Cutter .005" Radius MF446143
$
20.51
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Added Flat to Shank. Radius. 005" +/-.002" (2 Places). Shoulder. 830" +/-.005".
1" Horizontal LH Radius Cutter USA HSS Resharpened Professionally 1A
$
19.99
Buy It Now
$5.99 Shipping
Condition: Used
Location: Temecula, United States
This item has been resharpened and is very sharp. THIS IS A LEFTHAND CUTTER.
.385" x .200" Carbide Groove Cutter .020" Radius 45 Degree MF4461521
$
20.51
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Width. 200" +/-.005" (End to Tangent 45 Degree). Shank 1/2". Inside Radius. 020" +/-.005" (Blend into 45 Degree). Angle 45 Degree.
F&D 3/8" X 3 Horizontal RH Radius Cutter US HSS Resharpened Profess C4 1" Shank
$
21.99
Buy It Now
$5.99 Shipping
Condition: Seller refurbished
Location: Temecula, United States
This item has been resharpened and is very sharp. THIS IS A RIGHT HAND CUTTER.
5/8" Radius Cutter - Resharpened. 4-1/4" Dia, 1-1/4" Arbor Hole
$
24.00
Buy It Now
$8.00 Shipping
Condition: New
Location: Erie, United States
Here we have a 5/8" Radius Cutter - Resharpened. 4-1/4" Overall Dia, 1-1/4" Arbor Hole and a keyway width of 5/16". Overall cutter width is 15/16". Nice ... moreand sharp though.
.275" x .052" Carbide Key Seat Cutter .0075" Radius MF446147
$
17.66
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Radius. 075" +/-.0025" (2 Places).
3/8" x .055" Carbide Head Key Seat Cutter, .020" Radius, MF44612517
$
17.49
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Shank = 1/2". Added Flat to Shank. Radius =. 020" +/-.005" (2 Places). Shoulder =. 300" x. 700" Min.
Moon Cutter 6" x 1" x 1" HSS Side Milling Cutter Staggered, 12 Tooth, Radius
$
14.95
Buy It Now
$10.50 Shipping
Condition: Used
Location: Saint Louis, United States
Used 6" side milling cutter as shown. This came from an aerospace parts manufacturer and has a radius on the cutting edge but I don't know for sure what ... moreit is. It's similar to other side milling cutters from this same manufacturer that have a .145 radius. Please check out the photos.
5/32" Corner Radius END MILL High Speed Steel 1/2" shank , Used Made in Japan
$
25.00
Buy It Now
Free Shipping
Condition: Used
Location: Zanesville, United States
5/32 Radius 1/2" Shank High Speed Steel. Looks like it has never been sharpened. Could be used as is.
F&D 3/8" X 3 Horizontal LH Radius Cutter US HSS Resharpened Profess C5 1" Shank
$
21.99
Buy It Now
$5.99 Shipping
Condition: Seller refurbished
Location: Temecula, United States
This item has been resharpened and is very sharp. THIS IS A LEFT HAND CUTTER.
3/8" x .012" Carbide Head Key Seat Cutter Full Radius MF44612539
$
17.66
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Glendale, United States
Full Radius. Shoulder. 300" +/-.005" x. 650".
5" x 1" x 1 1/4 Side Milling Cutter 24 Tooth Niagara Staggered Tooth Gear Cutter
$
44.95
Buy It Now
Free Shipping
Condition: New – Open box
Location: Weatherford, United States
Corners have 1/4" radius.
Internal Tool Carbide Head Double Concave Radius Keyseat Cutter 3/4 x .28 x.094R
$
50.00
Buy It Now
Free Shipping
Condition: Used
Location: Johnson City, United States
To Find Our Cell Phone Number from a PC.
Convex Radius Milling Cutter 2-1/2 X .150 X 1” Bore Thurco Machinist Tool V95
$
7.99
Buy It Now
$4.90 Shipping
Condition: Used
Location: Council, United States
I will be listing similar item daily. Please put me on your favorites list, visit my store and check back often and take advantage of my combined shipping ... moreoffer detailed below Here are my combined shipping rates if you plan to purchase more than one item0-4 ounces = $4.605-8 ounces = $4.909-12 ounces = $5.7513-16 ounces = $7.00As many cutters as I can fit into a Small: 8 ⅝” x 5 ⅜” x 1 ⅝” flat rate box = $8.25As many cutters as I can fit into a Medium: 13 ⅝” x 11 ⅞” x 11” or 11” x 8 ½” x 5 ½” flat rate box = $15.00
Internal Tool Carbide Head Double Concave Radius Keyseat Cutter 3/4 x .28 x.094R
$
80.00
Buy It Now
Free Shipping
Condition: New
Location: Johnson City, United States
To Find Our Cell Phone Number from a PC.
2-3/4" x 5/16" x 1" HSS Side Milling Cutter W/Radius TiN Coated
$
48.74
Buy It Now
$5.99 Shipping
Condition: New – Open box
Location: Middlebury, United States
Need it urgently?. Call us and we will do what we can to get it to you quickly. Unless otherwise specifically agreed to in writing by. Weight (lbs, oz): ... more0,5. Prefer to pick it up yourself?. LOCAL PICK-UP.
Cleveland Twist Drill Co. Convex Radius Milling Cutter 2-3/4” x 3/8” x 1” (4-F)
$
18.00
Buy It Now
Free Shipping
Condition: Used
Location: Spring Grove, United States
Cleveland Twist Drill Co. Convex Radius Milling Cutter 2-3/4” x 3/8” x 1” (4-F). Condition is Used.
R1 TO R25, 2 OR 4 FLUTES HSS CORNER ROUNDING RADIUS END MILL CUTTER - SELECT
$
125.56
Buy It Now
$2.00 Shipping
Condition: New
Location: China
This product is high quality material for super hard high speed steel. Material: Superhard High Speed Steel (HSS-AL). (You can select the required specification ... moreor size, buy it now.). Compared to the general super hard material and ordinary high-speed steel material with higher hardness, better durability.
Dolfa (5-690-040) 5/16" x 1-5/8" x 3/4" x 4" OAL HSS 6-Flute Convex Shank Cutter
$
74.95
Buy It Now
Free Shipping
Condition: New
Location: Farmington, United States
Manufacturer: Dolfa. Dolfa Item Number: 5-690-040. Item Type - Convex Shank Cutter. Material / Coating - HSS. Number of Flutes - 6.
1 2 3 4 5 6 7 8 9 10 11
 In 

Former Listings  
 
Concave Radius Cutter 4 x 1 7/8 High Speed Steel
High Speed Steel Radius Cutter 4 x 1 7/8 Arbor 1 1/2 Concave Used but has been resharpened I have others selling and if interested in others I can package together to save on shipping. 2000 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1400862305e-0x104-
Freud convex radius cutter 3/4" x 7/8"
Great condition. Sharp as new. These go for over $100 new. Bid with confidence and thanks for looking.
Vortex Insert Cutter 1/4" Radius w/ 2 Sets of Extra Cutters
Used Vortex Insert Cutter with Two Brand New Sets of Cutters In good working condition and physical appearance. Please feel free to contact us with any questions you may have. Toll Free: 888.765.4499 Hours of operation: 8 a.m.4:30 a.m. PST) Mon-Fri
Arbor Mill Milling Cutter 2231 M-5 5" Dia 2 9/16 Round Radius Spherical Concave
This listing is for a Arbor Mill Milling Cutter No. 2231 M-5 that is about 5" Dia and has 2 9/16 stamped on it. Round Radius Spherical cutter. Fits on a 1 1/2" shaft arbor with 1/4" keyway and is 4 1/4" long. Shows very minor signs of use. I do not know if this is carbide or HSS but it is very heavy weighing in at 12 lb 13 oz. Shipping price includes insurance for Domestic Shipping Only! Will be shipped USPS Priority Mail. Payment by PayPal. No International bidders without prior approval for shipping estimate! Price noted is for Domestic shipping only. W ill try to ship within 2-3 business days after receipt of cleared payment. Please pay for item within 7 days of winning auction. Please contact me within 7 days after receipt of item if not completely satisfied.
BROWN & SHARPE 1/2" RADIUS CUTTER CONCAVE 1/4 ROUND, 1" ARBOR 3-1/4" DIAMETER
Description: Sharp. Overall dia. 3.25" Material: HSS,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14022576b66-0xfb-
Leitz 3Z TCT shaper cutter spindle molder bead half round edge radius 1-1/4 bore
Your tool will arrive ready for production or properly protected to store for that unique job. Bead/ Half Round/ Nosing 3/16" Radius oellasawandtool.com balanced and verified made in USA by Lietz Tooling#2431 7 lbs Black Oxide Finish Useful in other woodworking applications. Why do the same customers keep coming back? Besides excellent sharp tooling at unbelievable prices. Our shipping department is.well magical, Their philosophy is simple, pack well, combine tools, use only the best services US priority mail or Fed Ex and never charge a handling fee. When you integrate this philosophy with the open box program, you get a customer for life! Open Box Program. Frequently Asked Questions 1. Can you explain the program? Oella Saw and Tool came up with the program in April 2007 to further reduce our already reasonable shipping charges for ... moreour international clients. It basically allows you to optimize the weight limits of the US Postal Service's flat rate box program by holding the box until it has reached the 20 pound limit. This may take 1 night of auction purchases or a few weeks. There is no restrictions to the amount of time you need. If you are building your tooling investment and want to carefully select one or two pieces over a month you may do so. Once the box is full. We will ship immediately and notify you with a tracking number. You may at any time request to ship your item(s) at any time regardless of how full the box may be at the time of your request 2. How does it work? It is simple. At checkout pay for your item(s) and flat rate box* Indicate in the paypal payment or through an email"hold open box. Your item will be safely stored in your personal box until the shipping day. If you have not paid and want an open box, its best to email right away, even before your payment. flat rate box postage rates(insurance is strongly recommended and is extra) USA including Puerto Rico $10.35 up to 70lbs Canadian and Mexico $24.95 up to 20lbs* UK. Europe, Asia and Australia $41.95 up to 20lbs* Interna
Wettstein Radius Cutting Tool 4 Metal Lathe Shaplane Radii Cutter Southbend Etc
See pictures of actual item you will receive. I think it's a wettstein tools shaplane AI-248-01( creating a 2-1/2" max ball but please understand that is a huge guess and I could be wrong so no returns because it is not that. The shank was milled down by someone most likely so it would fit there aloris toolpost. Therefore the manufacturer tag has been made un-ledgable. Posted with
2" Ball Nose 1" radius 1.962" Cutter end mill tool Milling machine quick change
Item. Radius Cutting end mill Manufacturer. Unknown Diameter. I read 1.962" Cut at the Largest point. Just a touch under 2" Shank Size. 2" round with the Flats and also has the groove for Eclipse twist lock if you have a master holder for it Type. HSS High speed steel 4 Cutting Flutes Condition. Nice very sharp used This is not an actual photo but it is pretty much identical to the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine ... moreitems for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395 ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3
BRIDGEPORT r8 1" tool HOLDER WELDON STYLE, radius cutter included INV=9410
CLICK ON THE THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a BRIDGEPORT r8 1" tool HOLDER WELDON STYLE. End mill is crap but included. No foreign bidders. No exceptions. NO CANADIANS. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Ever. This listing was posted using command line interface provided by. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I do collect sales tax on in-state purchases. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-14046080c14-0x101-
Holdridge 4S Radius Cutter For Lathe, Lathe Tools
Used Holdridge model 4S radius cutter for lathe. Great tool for small parts machine shop. Cannon makers or for a thousand other ideas. The set is missing some minor parts, but the major parts are there. New this tool sells for over $700.00. Parts are available for this tool. No machine shop is complete without one. A must for gunsmiths. Shipping via Fedex Ground. This is heavy. 28 pounds. Paypal only. Must be paid within 24 hours of end of auction. Returns not accepted. It is too easy to swap out parts.
ISCAR INSERT RADIUS CUTTER CM-D.50 - W.62 WITH 4 INSERTS
ISCAR INSERT RADIUS CUTTER CM-D.50- W.62 WITH 4 INSERTS
Holdridge Radii Cutter radius cutter Model 4D Very little use
Holdridge radius cutting tool with cutters in lightly used condition exactly as shown in pics.Case is in OK condition A Bit separation on the lid.Also included is a set of allen wrenches.The set does not appear to be missing any peaces.I think it has some extra parts with it.
RADIUS TOOTH Side Milling Cutter 1/4 RAD x .3.00" x .375 x 1" LH HSS STANDARD
1/4" RADIUS TOOTH CUTTER SIDE MILL CUTTER LH STADARD TOOL 10 DEGREE RAKE 1/4 RAD 3.00 x.375 x 1" LH HSS CUTTER USED IN EXCELLENT CONDITION PLEASE SEE ALL PICTURES FOR DETAILS Thanks for looking Please see my other auctions I have many gages. Measuring devices and machinist tools on auction I will combine shipping to save you money Good Luck Bidding I will reimburse the shipping cost difference If there is one. On Jul-14-13 at 20:33:39 PDT. Seller added the following information:
radius cutter 3/16 MACHINIST MACHINESHOP automotive body shop aircraft tools
this is a radius cutter 3/4 arbor size for machinists it has a 3/16 radius as stated on shank, cutting edge is in excellent condition shipping will be $3.00 IN THE USA. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-140874eeee8-0xfe-
Concave Radius Cutter 4 x 1 3/8 High Speed Steel
High Speed Steel Radius Cutter 4 x 1 3/8 Arbor 1 1/2 Concave Used but has been resharpened I have others selling and if interested in others I can package together to save on shipping. 2000
Keyway Cutter 1.250 x .250 x .125 radius Lot 115 CNC or Manual Machining work
Description: Keyway Cutter1.250 x.250 x.125 radius CNC or Manual Machining work Condition is Used: This has been sitting around for while so it may not be perfect. Powered by The free listing tool. List your items fast and easy and manage your active items.
radius tool and cutter grinding attachment
This a really nice radius attachment for tool and cutter grinders. I think it might be from a Cincinnati. Or a Hartex. I used it to cut a large radius on my mill. It has adjustable stops for both directions and a friction stop that adjusts as well. The movement is incredibly smooth It weighs about 65 lbs. The dials are marked with 125 increments and one rotation is 1/8" The table has 1/2" t-slots.These dont come up for sale very often, and when they do they command high prices. Mine is priced cheap by comparison. I am willing to adjust my shipping charges if you have a better plan, otherwise I'll use whatever comes in at Ebay's price of course, pick up in person is welcomed. Thanks for looking.
HOLDRIDGE 4S RADII RADIUS CUTTER ATTACHMENT BALL FORMING W/WOOD CASE
Holdridge 4-S radius/ball cutter attachment in wooden case.
Cutting Head DML DCC 027 1 ¼” Bore 5/8” Radius Concave Radius Cutter
Cutting Head DML DCC 027 1 ¼” Bore 5/8” Radius Concave Radius Cutter Used and in good condition. I’ve included an image of each of the three cutting edges so you can see the condition. Comes as is. Shipping: I will be happy to upgrade to a different or faster service if you are willing to pay the additional coast. Combined Shipping: I will combine on shipping when and where possible to save your shipping cost. Payment: Payment is due upon winning within 5 business days or within 5 business days upon receipt of your invoice unless other arrangements are made. Non-payment will result in you being reported for non-payment and you will be blocked from bidding on any further of my listings. Do not bid unless you want the item and are willing to pay. Returns: It is best to be sure on what it is that you are bidding upon. I put up quality photos ... moreand try to describe the items correctly. The photos are the best description of what you are bidding on and its condition. If there is an issue with an item. Contact me ASAP to reach resolution. If you want to return something you will need to contact me first. I will give refunds once the item(s) has been returned and are in the original condition. You will need to send the item(s) to me insurance and with tracking. Your refund will be for the purchase price only. As you can see it is costly for returns. So please be sure that when you bid, it is the item you want. You are buying where is as is and by bidding you are agreeing to pay if you win and also accept all responsibility for the item. Its use and any damaged that my result from its us.
Shaper cutter pair,1 3/4" radius with 1" X 3 1/2" Dia. rubcollar Bearing
Shaper cutters are high speed steel in good condition very sharp with lock edge- 1 3/4" radius cutting edge in excellent condition. Lock edge rub collar set has piloted bearing on bottom of set. very good condition and only slight surface rust. 1 1/4" bore
UNIVERSAL PRECISION TOOL & CUTTER GRINDER w/ RADIUS ATTACHMENT
aims UNIVERSAL PRECISION TOOL& CUTTER GRINDER w/ RADIUS ATTACHMENT read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a used Universal Tool& Cutter Grinder in working condition. Model# BA960BB Serial# 7327-7-60 Features: High strength. Easy usage. Corrosion resistance. Robust construction. Longer functional life. Specifications: Table: Table Size: 22" x 5" Travels: X-Axis Travel: 12" Y-Axis Travel: 8" Z-Axis Travel(Wheel Head Vertical) 7" Wheel Head: Wheel Size: 1/2" to 6" Wheel Head Swivel: 0-90 degree L/R Spindle Swivel: 0 to 90 degrees L/R Distance From Centerline of Wheel Shaft to Table Min. Max. 3-1/4" to 10-1/2" Motor: 1 Horsepower. 230/ 460 Volt, 3,440 rpm, 3/ 1 Amps, 50/ 60 Hz. General: Electrical: 230/ 460 Volt. Three Phase ... moreOverall Dimensions: 39" x 33" x 62" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. UNIVERSAL PRECISION TOOL& CUTTER GRINDER w/ RADIUS ATTACHMENT UNIVERSAL PRECISION TOOL& CUTTER GRINDER w/ RADIUS ATTACHMENT UNIVERSAL PRECISION TOOL& CUTTER GRINDER w/ RADIUS ATTACHMENT UNIVERSAL PRECISION TOOL& CUTTER GRINDER w/ RADIUS ATTACHMENT UNIVERSAL PRECISION TOOL& CUTTER GRINDER w/ RADIUS ATTACHMENT UNIVERSAL PRECISION TOOL& CUTTER GRINDER w/ RADIUS ATTACHMENT UNIVERSAL PRECISION TOOL& CUTTER GRINDER w/ RADIUS ATTACHMENT UNIVERSAL PRECISION TOOL& CUTTER GRINDER w/ RADIUS ATTACHMENT UNIVERSAL PRECISION TOOL& CUTTER GRINDER w/ RADIUS ATTACHMENT UNIVERSAL PRECISION TOOL& CUTTER GRINDER w/ RADIUS ATTACHMENT UNIVERSAL PRECISION TOOL& CUTTER GRINDER w/ RADIUS ATTACHMENT UNIVERSAL PRECISION TOOL& CUTTER GRINDER w/ RADIUS ATTAC
DML 5/8" Concave Radius 3-wing Cbd Shaper Cutter
Hi your looking at a slighty used? 5/8 radius cutter with a 1 1/4" bore looks like its new feels very sharp
Radii Cutter Lathe tooling machine shop radius hemishpere concave convex 3-d
Extremely clean and well maintained radii cutter by holdridge mfg co inc. of gardena california. it will cut radii both convex and concave and has dial and setup block. appears new or used only a few times and comes in a well preserved carrying case made of plywood. will work with all lathes but fitment might be necessary. heavy maybe 25 lbs and well made cutting tool all attachments apear to be there except for allen wrenches are missing but are very inexpensive tools and common at all hardware stores.
USED CARBIDE TIP ANGLE CUTTER 1.200 X 7/16" X .046 RADIUS X 30 DEGREE 732
YOU ARE BIDDING ON ONE USED CARBIDE TIP ANGLE CUTTER 1.200 X 7/16" X.046 RADIUS X 30 DEGREE OAL IS 4" X 1/2" LOC 6 FLUTE 3/4" SHK VERY LITTLE WEAR ON THE HIGH PORTION. CAN BE USED AS IS DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
NIAGARA 5/32" HSS CONCAVE RADIUS MILLING CUTTER w/ 3/4" SHANK
aims NIAGARA 5/32" HSS CONCAVE RADIUS MILLING CUTTER w/ 3/4" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Niagara Cutter. This is a HSS Concave 5/32" Radius Milling Cutter in good condition. Part# EDP18904 Specifications: Radius: 5/32" Shank Diameter: 3/4" Cutter Diameter: 1" Cutter Width: 41/64" Overall Length: 3-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NIAGARA 5/32" HSS CONCAVE RADIUS MILLING CUTTER w/ 3/4" SHANK Reliable Tool Inc. ... morec 2011 | Powered by
Delta Rockwell Shaper Cutter 1/2 bore 3/4 thick radius moulding D-136 A0041
I am listing a lot of shapers that came with my Delta Heavy Duty Shaper. Please see pictures for condition and shape. If the cutter had a D number. I listed it in the title. Shipping: Generally. The shipping price that is quoted is the cheapest method I could find when I listed the item. If you think I messed up, by all means, ask! I will try to offer discounts on multiple purchases for shipping if it will save you a significant amount of money. Payment: Please try to pay within 48 hours of auction close unless prior arrangements have been made. I try to let pictures speak for the item. If you have any questions about the item. Or shipping or payment, please do not hesitate to contact me through Ebay. Check out for more great items! I combine on shipping! Powered by
Niagara keyway Cutter 2 x .365 x 1.25 x 4.75 .125 Radius for CNC or Manual Mill
Niagara keyway Cutter 2 x.365 x 1.25 x 4.75.125 Radius for CNC or Manual Mill. This may be used but its in like new condition. Has been sitting in our tool crib for a while. We no longer use these cutters and we are selling them off to free up space. Some of the ones I am listing are either New, Resharpened or Used, I have tried to take a close up pictures so you can evaluate the cutters yourself. For the most part these are all in good shape that i have listed. Powered by The free listing tool. List your items fast and easy and manage your active items.
PRECISION HSS CONCAVE RADIUS MILLING CUTTER - 1/16" RADIUS
aims PRECISION HSS CONCAVE RADIUS MILLING CUTTER- 1/16" RADIUS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a HSS Concave Milling Cutter in good condition. Specifications: Diameters: 3/4" Shank: 1/2" Thicknesses: 3/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PRECISION HSS CONCAVE RADIUS MILLING CUTTER- 1/16" RADIUS Reliable Tool Inc. c 2011 | Powered by
Niagara Cutter 3 x 3/8 x 1.250 x .062 degree radius for CNC or Manual Mill
Niagara Cutter 3 x 3/8 x 1.250 x.062 degree radius for CNC or Manual Mill This may be used but its in like new condition. Has been sitting in our tool crib for a while. We no longer use these cutters and we are selling them off to free up space. Some of the ones I am listing are either New, Resharpened or Used, I have tried to take a close up pictures so you can evaluate the cutters yourself. For the most part these are all in good shape that i have listed. Powered by The free listing tool. List your items fast and easy and manage your active items.
PRECISION 2-1/4" HSS CONCAVE MILLING CUTTER - 5/32" RADIUS
aims PRECISION 2-1/4" HSS CONCAVE MILLING CUTTER- 5/32" RADIUS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a HSS Concave Milling Cutter in good condition. Specifications: Radius: 5/32" Diameter: 2-1/4" Arbor Hole Diameter: 1" Thickness: 3/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PRECISION 2-1/4" HSS CONCAVE MILLING CUTTER- 5/32" RADIUS Reliable Tool Inc. c 2011 | Powered by
PRECISION 3" HSS CONVEX MILLING CUTTER - 7/16" RADIUS
aims PRECISION 3" HSS CONVEX MILLING CUTTER- 7/16" RADIUS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a HSS Convex Milling Cutter in good condition. Specifications: Radius: 7/16" Diameter: 3" Arbor Hole Diameter: 1" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PRECISION 3" HSS CONVEX MILLING CUTTER- 7/16" RADIUS Reliable Tool Inc. c 2011 | Powered by
LRH K-1432 Molder Carbide-Tipped Quarter Round Concave Radius Shaper Cutter + EX
About Us: We hunt for and find the treasures you are looking for. We have been successful in providing a positive experience f or over 33 00 eBay members. Please be confident that your experience with us will be a positive one as well. Back Up Top LRH K-1432& 1407 Molder Shaper Cutters Details: Very Good Condition Signs of light use/wear Blades are still very sharp Model: K 1432& 1407 Original boxes are also included 3" in diameter. 1/2" thick, and has a 1/2" hole diameter The other two blades measure 2" in diameter. One is 1" tall, the other is 3/4" tall, and both have a 1/2" hole Everything Pictured is included Back Up Top
Holdridge Radius Cutter 12D 12" complete
Holdridge Radius Cutter 12D 12" complete kit in original wooden case. Complete with instructions and carbide tipped tools. Will cut up to a 12" diameter concave or convex shape on your lathe. Excellent condition, rarely used. This item is well over 100 pounds. It will have to be shipped truck freight. Buyer is responsible for all shipping costs. I'll help arrange the truck and crate this item at no cost. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1434520a891-0xf7-
AMANA CARBIDE TIPPED SHAPER CUTTER WITH 1/8" RADIUS CUT WOODWORKING TOOL
DESCRIPTION: USED. LOOKS NEW, AMANA CARBIDE TIPPED SHAPER CUTTER NO. 971. 1/8 RADIUS X 2 5/8. THE ARBOR IS 3/4 BUSHED DOWN TO 1/2" CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT ... moreWAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWE
Pratt Whitney Defense Training Manual Aircraft Cutter Radius Grinder Parts Book
Pratt Whitney Defense Training Manual Aircraft Cutter Radius Grinder Parts Book H.C Sullivan Director of Training Pratt& Whitney Aircraft Division Of United Aircraft Corp East Hartford. Conn. USA
Radius Cutter, Holdridge Mfg. Model 3S
This radius cutter is like new. Has been used 3 times to my knowledge. It may be missing mounting screws and 2 Allen wrenches. They are off-the-shelf items. The cutters will need re-ground they have chips in the carbide. This is a VERY accurate tool when used as intended.
LRH 1-1/4" Radius Shaper Cutter #1439 for 1" Spindles
LRH 1-1/4" Radius Shaper Cutter#1439 for 1" Spindles This cutter was custom made by LRH for applying edges on wooden counter tops and conference tables. The cost was over $400.00. check their website for current pricing. Buy with confidence check my feed back
Used Melin Tool 1/32" Cobalt Radius Cutter, Corner Rounding End Mill, RC-1201
Used Melin Tool 1/32" Cobalt Radius Cutter. R-1201 3 Flutes 2-1/2" Overall Length Slightly Used. In Excellent Condition, Has been resharpened. Please See Pictures Above For Details.
LRH K-1427 Concave 5/8" Radius Carbide Shaper Cutter Molder
LRH K-1427 Concave Carbide Shaper Cutter Molder 5/8" Deep Radius. 1 1/2" Radius Opening. 2" OA Opening Width 1 1/4" Spindle Visit My Store! I Combine Shipping! If you purchase more than one item from my store. I will give you a discounted shipping rate. Contact me for details. I can Expedite your item! If you prefer Priority Shipping, contact me! Please note: I do not guarantee fitment of items! You assume ownership& responsibility by purchasing an item. Be sure you know what you're purchasing. I only guarantee the model number as provided by the factory. If you purchase an item that does not fit your application, I cannot give you a refund.
LRH K-1428 Concave 3/4" Radius Carbide Shaper Cutter Molder
LRH K-1428 Concave Carbide Shaper Cutter Molder 3/4" Deep Radius. 1 1/2" Radius Opening, 2 1/4" OA Opening Width 1 1/4" Spindle Visit My Store! I Combine Shipping! If you purchase more than one item from my store. I will give you a discounted shipping rate. Contact me for details. I can Expedite your item! If you prefer Priority Shipping, contact me! Please note: I do not guarantee fitment of items! You assume ownership& responsibility by purchasing an item. Be sure you know what you're purchasing. I only guarantee the model number as provided by the factory. If you purchase an item that does not fit your application, I cannot give you a refund. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14432b00509-0x105-
3/8" BEAD AND LONG 3/4" RADIUS SHAPER CUTTER
Grizzly 3/8" bead and long 3/4" radius round cutter is approx. 3" round and 1" thick. Please see picture for a little hard to describe. This cutter has a carbide tip for longer life. The cutter has a 3/4" bore hole plus spacers for 1/2" hole size. I have only used bit a few times been in storage for 15 years
Aerosharp -5MMx25MM or 2.5 RAD solid carbide Convex Radius Cutter
I am pretty sure this is a quality regrinds. One pc has gouges on lower shank.But should not affect function. She is EUC. carbide Construction and sharp. The end mics. 5.MM x 25MM diameter or 2.5 RAD. THE prices are Each. We ship priority mail and combine to 50States ONLY, after payment.
Keyway Cutter Groove Tool CNC Manual Milling .5 x 3/16 x 1.5 #247 .156 radius
Some of the ones that I am listing are either resharped or new. Please look at pictures closely to see what the condition is. Some have been sitting around our shop for a while and may have dings on them. I will combine shipping. Please request total when you check out and I will adjust the shipping charges based on weight of what you purchase. Powered by The free listing tool. List your items fast and easy and manage your active items.
1" Ball Nose Indexable Cutter end mill LMT Fette Radius Carbide Inserts LC609T
Here we have qty.1 USED insert per bid. Looks to be in ok shape yet. Has some tiny chips here and there, nothing serious. Thickness is 4mm The center hole is 6mm diameter Overall Length tip to Flat measures about 21.72mm Made by LMT Fette I do not have the original packaging. This is not an actual photo but it is pretty much exactly like the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each. We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. ... moreIf you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd. NW Grand Rapids. MI 616-791-9395 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14460fadf5c-0x10c-
Radius Bottomed Fly Cutter/Planer for Wood
Honestly I'm not sure what to call it or what you would even use it for. It is definitely unique. It would only be used for wood in a drill press or mill at high rpm. It measures 5 1/8 inches across and 1 1/8 deep. The tap you see pictured is NOT included. Is there only for reference. It is a 9/16 coarse thread and it is a steel insert. The tool itself is cast aluminum. It comes with an extra set of knives in a package that has not been opened. I got it when I bought out a Pattern Shop years ago.
GRINDING WHEEL RADIUS DRESSER surface tool cutter grinder od form NO DIAMOND
good used grinding wheel radius dresser- NO diamond mfg not marked please check my other auctions and happy bidding! we are always happy to combie items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
B & C Co 2 1/4" x .687" x 7/8" RADIUS CUTTER 1/4" DOUBLE RADIUS
B& C Co 2 1/4" x.687" x 7/8" 1/4" RADIUS SIDE MILL CUTTER RADIUS CUTTER 11 TOOTH 7/8" Arbour.687" HIGH CUTTER USED IN EXCELLENT CONDITION PLEASE SEE ALL PICTURES FOR DETAILS THANKS FOR LOOKING PLEASE CHECK OUT MY OTHER AUCTIONS FOR MORE MACHINIST TOOLS AND GAGES I WILL COMBINE SHIPPING On Jan-17-14 at 15:08:14 PST. Seller added the following information:
Valenite Diameter Radial radius INSPECTION of facemill cutter TOOLMAKER
Calibrated in 6-30-04- due for recalibration lightly used high precision 8 5/8 diameter x 1" thick This tool is used to align cutters on a face mill or other type of work similar.
4.681 X .551 X 1 SIDE MILLING CUTTER ODD RADIUS (C-1-16-4-5)
C-1-16-4-5) INDUSTRIAL SURPLUS. REFURBISHED IN OUR SHOP. THIS IS A SIDE MILLING CUTTER- ACTUAL MEASUREMENTS ARE 4.681 X.551 X 1 INCH BORE. MFGR UNKNOWN. 22 TEETH. HIGH SPEED STEEL. HAS 3/8 RADIUS CENTERED ON THE OD OF THE TOOL. THIS IS NOT A TYPICAL FULL RADIUS THAT ENCOMPASSES THE ENTIRE WIDTH OF THE TOOL. SEE PHOTOS. TOOLS WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY. TOOLS THAT ARE YOU HAVE USED ARE NOT RETURNABLE. BUYER PAYS RETURN FREIGHT. REASONABLE BEST OFFERS CONSIDERED FOR MORE THAN 1 ITEM. IF YOU NEED MORE PIECES THAN WHAT WE SHOW. LET US KNOW. CONTACT US THRU EBAY MESSAGING FOR SPECIAL PRICING. WE VALUE OUR GOOD FEED BACK RATING AND WANT TO MAINTAIN IT. SO IF YOU HAVE AN ISSUE, EMAIL US OR CALL OUR TOLL FREE NUMBER IN OUR HEADING BEFORE YOU POST. PAYMENT MUST BE RECEIVED WITHIN 7 DAYS OF SALE OR ... moreWILL CONSIDER NON-PAYING BIDDER- UNLESS OTHERWISE ARRANGED. INDIANA RESIDENTS ADD 7% FOR SALES TAX OR PROVIDE T.I.D. WE GENERALLY SHIP WITHIN 24 HOURS OF PAYMENT. WEEKENDS EXCLUDED. PLEASE ALLOW ADEQUATE TIME TO CLEAR CUSTOMS ON INTERNATIONAL SHIPMENTS. CONTACT US WITH ANY QUESTIONS VIA EMAIL OR OUR TOLL FREE NUMBER(SEE STORE HEADING) 10AM TO 5 PM EST PLEASE. WE ACCEPT PAYPAL AND VISA. MASTERCARD, DISCOVER AND AMERICAN EXPRESS VIA OUR PROPAY ACCOUNT. IF YOU WANT PRIORITY. PARCEL POST OR COMBINED WEIGHTS ARE OVER 13 OUNCES THOSE COSTS WILL VARY BY LOCATION AND MUST BE ADVISED. PLEASE CHECK OUR STORE FOR OTHER INDUSTRIAL ITEMS. IF YOU DON'T FIND WHAT YOU NEED. LET US KNOW.
Radius Wheel Dresser for Brown and Sharpe Tool and Cutter Grinder
Radius Wheel Dresser for Brown and Sharpe Grinder It is used but is snug and still turns smooth and free IF YOU ARE OUTSIDE THE LOWER 48 PLEASE CONTACT ME BEFORE PAYING PLEASE PAY BY PAYPAL ONLY. SOLD AS IS. NO REFUNDS OR RETURNS. No international buyers with this auction Buying Terms: Do not assume anything. If the description is not clear enough. Please let us know. Please ask any questions you may have BEFORE buying. Guarantee Terms: This item is sold as is. That means that it has no guarantee and no return. The item you will get is the item pictured below. Including only what is pictured, and in the condition pictured. Return Policy: Read the description and view the pictures thoroughly. If anything is unclear. Simply email us and ask questions before buying. There are no returns for As-Is sales. Payment Terms: Payment is due within 7 ... moredays. If paying with PayPal. Your order must ship to the exact address on your payment. Shipping Terms: Shipping quoted is for shipping and handling in the Continental U.S. only(excludes Alaska and Hawaii) Orders will ship via USPS and we therefore are unable to ship to P.O. Boxes. Only orders totaling $250 or more will require signature upon delivery. Most items ship within 2 business days. Local pickups at our Kent. Ohio 44240 facility are more than welcome. International Buyers: No international buyers with this auction Please view our other auctions
3/8" corner rounding cutter / radius excellent used condition CLARKSON
3/8" corner rounding cutter/ radius excellent used condition 1" thre aded shank Many other Shapes/Sizes Available From Stock Please Ask Picture Taken is a Sample Picture + May Vary Slightly From Item Supplied Powered by
Weldon ~corner rounding inner radius cutter mill - 4 flute -CR 12-3 - HS - 3\8R
WELDON ~~ CORNER ROUNDING END MILL ~~ R.H. CUT ~~ CR 12-3 ~~ 3\8" RAD. ~~ 1\2" SHANK ~~ 3& 9\16" LONG. MORE MORE MORE BEING LISTED SO KEEP ME SAVED I DO COMBINE SHIPPING ON MULTIPLE WINS. USED BUT VERY CLEAN AND VERY SHARP. USA SHIPPING ONLY! MUST BE PAID FOR BY 3RD DAY CLOSE OF AUCTION. THANKS FOR LOOKING.
MORSE 7" X 1" X 1-1/4" STRAIGHT TOOTH HSS MILLING CUTTER W/ 1/16" RADIUS
Made by Morse. This is a Used Milling Cutter in Good Condition. Specifications: Diameter: 7" Thickness: 1" Arbor Hole: 1-1/4" Radius: 1/16. Comes as shown in pictures.
Niagara Cutter Corner Rounding End Mill CRE-8A 1/2" Shank 1/4" Radius
Niagara Cutter Corner Rounding End Mill CRE-8A HSS UNC 1/2" Shank 1/4" Radius EDP# 14260 Used. Excellent condition. See photos for details. Feel free to message with any questions regarding this listing. Thanks for looking. We are open Monday through Friday 9 a.m. to 6 p.m. Purchases made Friday to Sunday will be shipped the following Monday. Please ask all questions prior to bidding. If you are less than satisfied with your purchase and/or service. Please contact us before opening a case. We are more than happy to resolve any issues you may have. You can also contact us at 520-777-1000. Thank you! Posted with
NATIONAL TWIST DRILL RADIUS FORMING CUTTER
NATIONAL TWIST DRILL RADIUS FORMING CUTTER 3 x 1/2 c x 1.260 rake 10deg LIKE NEW LY-05
Router Bit Bull Nose Cutter 1/2" Radius 1/2" Shank
Unknown brand. 1.5" height. Condition is as seen.
Snap-on Muffler Cutter 8-1/4" Long 3/16" Radius - PH66 *
Snap-on Muffler Cutter 8-1/4" Long 3/16" Radius- PH66* Good used condition. No owner's marks of any kind. Sells new for $59.05! LOW Buy-It-Now Price! Item will be carefully packaged and shipped via USPS 1st Class Mail Package. $.30 is added to cover the cost of the padded envelope the item will be shipped in. But other than that, buyer pays actual shipping cost only, no handling fees. International Buyers– Please Note: All international shipments are via USPS Priority Mail International. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company ... moreor when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. A Few Words About Feedback: I hope to receive positive feedback and 5 Stars in each category from you once you have received this item. This is VERY important to me as a seller. I want nothing but satisfied customers. So if there is any problem with your item, do not hesitate send me a message and we'll get it worked out. I always leave positive feedback for my customers. Combining Items: I will always happily combine items into a single package to save my customers money on shipping. A lot of hand tools will fit in one of the flat rate boxes. BUT the easiest for me. Is if you do not pay right away, and wait to pay until the last item you want is finished. I will then send a combined invoice. I do not add handling fees, but sometimes the savings are better than others, depending on sizes, weights and shipping address. Please let me know right away if you are holding payment while waiting for another item.
Generic Concave Milling Cutter with 1/4" Center Radius
Generic 2-1/2"OD x.44W x 1/4"CLR concave milling cutter. 1" Arbor, 12 tooth. Appears to be in good condition!
2 Cobalt Alloy External Radius Cutter Lathe Bits 5/8 Machinist Gunsmith Tool Lot
Ebay Base This auction is for 2 external radius cutting lathe tool bits in 5/8" shank. These are premium quality alloys made by Crucible& Cleveland. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
EXCELLENT!! HOLDRIDGE 4D RADII RADIUS CUTTER ATTACHMENT BALL FORMING W/WOOD CASE
HOLDRIDGE 4D RADII CUTTER SET-UP AS SHOWN INCLUDEDS CUSTOM MODIFIED YOKE THAT ACCEPT.750 TOOLING. WOOD CASE, AND ACCESORIES AS SHOWN, VERY NICE CONDITION. Made in the U.S.A. by Holdridge Manufacturing Company Inc. of Gardena. Ca. This is a Deluxe Radii/ Radius Cutter Set in GREAT condition. Model# 4-D Features: Cut and forms concave. Convex and spherical shapes. Specially designed for medium size lathes. Compound height from the base of the tool to centerline is adjustable from 1 5/8" to 1 3/4" Tool may be shimmed to fit various models of lathes and turret lathes. Specifications: Convex Ball Shapes: 0-4" diameter Concave Sockets to Radius Depth: 0-4" By reversing the yoke. Sockets up to 12" may be formed, however, radius depth will be minus 17/32" Overall Dimensions: 17-1/2" x 11-1/2" x 4-1/4" ... morethick Comes as shown in pictures.
Holdridge 3D Radii Cutter Radius Turner
This is a model 3D Holdridge radii Turning tool. Does Radii from 0- 3" This is the deluxe model with more parts and features than the 3S model. This tool is barely used. Current. New cost about $1,200.00. Payment via Paypal only unless alternate arrangements are made before bidding. No handling charge on orders shipped to US addresses. A $15.00 handling charge will be added to orders shipping outside the USA. Local pick up is an option on all items. I DO NOT MAKE SECOND CHANCE OFFERS. Per the new Paypal mandate. This will be shipped"signiature required" Simple return policy. If you don't like it return it in the condition received for a full refund. Buyer is responsible for return shipping charges. Pack items well and insure for full value. I will not accept returns that are damaged in return transit.
PETERSON 1-1/4" FLUSH MILLING ARBOR w/ RADIUS CUTTER
Made in the U.S.A. by Peterson. This is a Flush Milling Arbor w/ Radius Cutter in good condition. Specifications: Arbor Size: 1-1/4" Shank: 1" Cutter Diameter: 4-1/4" Cutter Radius: 5/8" Arbor Hole Diameter: 1-1/4" Overall Length: 6-3/8" Comes exactly as shown in pictures.
Milling Cutter 5 X 7/16 X 1-1/4 W .032 Radius Carbide Tip USA
Milling Cutter 5 X 7/16 X 1-1/4 W.032 Radius Carbide Tip USA This cutter has been sharped and/or radius and could be under sized. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS Priority Mail Flat Rate Envelope and cost $5.80. Powered by SixBit's eCommerce Solution
Stager Tooth Side Cutting Milling Cutter 6 X .307 X 1-1/4 W 3/32 Radius HSS USA
Stager Tooth Side Cutting Milling Cutter 6 X.307 X 1-1/4 W 3/32 Radius HSS USA.307 net width. This cutter has been sharped and/or radius and could be under sized. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. Will ship by USPS Priority Mail and cost $6.00. Powered by SixBit's eCommerce Solution
Shaplane Radius Tool For Lathe Swing 13" & Up Concave Radius Cutter
Shaplane Radius Tool For Lathe Swing 13" Up Concave Radius Cutter Very nice used condition Fits Lathe swing 13" up Shank and body are one piece steel casting Shank length 5" Photos were taken with and without flash*
USA 2.25" x 7/16" x 7/8" Radius Milling Cutter
USA 2.25" x 7/16" x 7/8" Radius Milling Cutter Excellent Condition NU1-D11-R8 Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback
USA 3.25" x 7/8" x 1.0" Radius Milling Cutter
USA 3.25" x 7/8" x 1.0" Radius Milling Cutter Very Good Condition NU1-D11-R8 Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback
Help