Shank Tec Hss Morse Mts Hss Milling Slitting Drills Drillbits Hss Morse Mts 2 Mts 3 Shank Od Spiral Flutes 1 Mts 2 Machine Round Shank Reamer Straight Flutes Reamer Spiral Flutes Reduced Shank Od Die Button Hss Hand Tap 2 Split Die Button Screw Shank 16 Tpi Bsw 1 Bsp 1 Hss Morse Mts 4 Drill Parallel Die Nut Drill Drillbits Hand Tap Bsp Hss Machine Tap Unf Hand Tap Unc Flutes 7 Hand Tap Bsw Hss Milling Hss Morse Mts 3 Drill Drillbits Machine Shank Wt 1 4 Screw Hss-Co Chucking Tpi 14 3 Flutes Helical Flutes Shank Tap Tap Bsf Quality Hss Split Button Die Reduced Shank Od 1 2 Annular Cutter 1 4 Tpi Annular Magnetic Drill 1 2 Tpi Slitting Saw Hss Mts Morse 1 Drill Drillbits Morse Mts 3 Drill Drillbits 1 Parallel Reamer Spiral Flutes 1 Slotted Boring 16 X 1 1604 2 Flutes 4 Flutes 4 X 1 60 Degree Cutter 60 Degree End Mill 8 X 1 Acme Inserts Annular Cutter Set Apkt Ball End Mill Set Bench Grinder Wheel Boring Id Burr Burr Set Carbide Carbide Burr Carbide Drill Carbide End Mill Lot Carbide Insert Holder Ccmt 21.51 Center Drill Center Punch Chucking Reamer Cnmg Cnmg 432 Cnmg 643 Cohss End Milling Cohss End Milling Endmill 4 Flutes Coolant Corner Rounding End Mill Counterbore Set Countersink Countersink 82 Cut Off Wheels Cutoff Blade Cutter 3 Cutter Saw 2 Deburring Deburring Tool Diamond Grinding Wheel Drill Bit Emuge End Mill Lot End Mill Set Engraving Cutter Flutes 1 Fly Cutter Gleason Grinding Wheel Hand Reamer Hand Tap Horizontal Band Saw Horizontal Mill Cutters Hougen Hougen Cutters Hss Involute Gear Milling Cutter Hss Milling Slitting Slotted Cutter Indexable Indexable End Mill Iscar Dgn Iscar Drill Kennametal Keyseat Cutter Lathe Cutting Bits Lathe Threading Tool Lathe Tooling Lathe Tooling Lot Lngx Lot Micro 100 Milling Milling Cutter Milling Cutter Lot Mts 2 Drill Drillbits Niagara End Mill Od 1 Od 2 Od 3 Osg Parting Blade Parting Tool Radius Cutter Reamers Roloc Rotabroach Rotary File Roughing End Mill Sandvik Cnmg644 Scrap Carbide Sekr Shell Mill Slotted Boring Slotted Drill Solid Carbide Boring Bar Spot Drill Tap 1 Taper Inter Bottoming Tapping Taps Tcmt 21.51 Thread Mill Thread Shank Threading Tool Tool Tool Bits Tpg Tpg 222 Tpg 322 Vbgt Wcmx Woodruff Woodruff Cutter Wt 1 Z Carb Counter Bore Wnmg Hss Hand Parallel Reamer Spiral Flutes Ball End Mill Osborn Nachi Carbide Inserts Hss Morse Mts 4 Drill Drillbits Carbide Endmill Dovetail Cutter Lathe Cutter Die Handle
 In 
 
Categories
Order by: 
Available to: 
Price: 
 - 
This site contains affiliate links for which I may be compensated
2, 4 & 6 Flutes Finishing End Mill Single End Cutter Straight Shank Lot of 4
$
119.00
Buy It Now
$18.11 Shipping
Condition: Used
Location: Los Angeles, United States
Niagara 88659 1-1/4 HSCO USA LD=6.801 H175 Microshield/HP. Sold as a set. Sold as is.
10Pcs 1.5MM Carbide End Mill 4 Flutes TiSiN Coat Milling Cutter CNC Mill
$
34.65
Buy It Now
Free Shipping
Condition: New
Location: China
Coating :TiSiN. Use TiSiN, containing silica, very high surface hardness and high thermal resistance. Chamfer End Mill. Aluminum Milling Cutter. PCB Milling ... moreCutter. Other CNC tool end mill. 2 Flute Flat End Mill.
5 Pcs 3/8" 3 Flute Regular Carbide End Mill 2-1/2" Overall Length
$
55.24
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Feature: 3/8" diameter × 1" length of cut × 2-1/2" overall length. High velocity milling of Aluminum and other non-ferrous materials. 3 flute and 45-degree ... morehelix allow harmonic balance at high speed condition and smooth cutting. Improved surface roughness-cylindrical margin which is controlled tightly. Maximum metal removal rate. Mirror face excellent surface finish & superior chip evacuation. Specifications: Material: Solid Carbide End Mill Type: Square End Mill Mill Diameter: 3/8" Overall Length: 2-1/2" Shank Diameter: 3/8" Length Of Cut: 1" Number Of Flutes: 3 Tool Coating: None Condition: New.
6Pcs 4 Flute 1/8" - 1/2" Solid Carbide End Mills Set - AlTiN Coated
$
58.99
Buy It Now
Free Shipping
Condition: New
Location: San Diego, United States
AlTiN Coated for improved performance and tool life in harder materials or high temperature applications. Auto Door Lock. Switch Parts & Accessory. Heat ... moreShrink. Auto Display Parts & Accessory. Auto Display Parts.
1/2" 3 Flute 37° Helix Carbide End Mill For Aluminum - SQUARE END -ZRN COATED
$
21.69
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification： 1/2" 3 Flute 37° Helix Stub Length Solid Carbide End Mill ZRN Coated Square End Feature: Material: Solid Carbide End Mill Type: Single ... moreMill Mill Diameter: 1/2" Overall Length: 3" Shank Diameter: 1/2" Length Of Cut: 1-1/4"(Due to the production batch factor, the product is engraved with 1-1/8, and the LOC is actually 1-1/4) Number Of Flutes: 3 Helix Angle: 37° HELIX Condition: New Package Including： 1/2" 3 Flute 37° Helix Carbide End Mill For Aluminum - SQUARE END -ZRN COATED .
3/4" 90° COOLANT INDEXABLE END MILL APKT 1003 3FL W/Certificate save $68.30 P[
$
41.95
Buy It Now
$11.80 Shipping
Condition: New
Location: Saint Charles, United States
Shars 3/4" 90° COOLANT INDEXABLE END MILL APKT 1003 3 FL W/Certificate New. 5pcs APKT 1003 Insert for Steel. 10pcs APKT 1003 Insert for Steel. Insert ... moreSize: APMT 1003. Shim Screw M2.5 x 6.5 APMT 22 1003 PDER DM YBG202.
8Pcs 4 Flute End Mill for Aluminum 1/16-1/2" HSS CNC Router Bit Milling Cutter
$
16.34
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Specifcaition: Type:4 Flute End Mill Meterial: High Speed Steel Note: Please allow 1-3mm errors due to manual measurement. Due to the difference between ... moredifferent monitors, the picture may not reflect the actual color of the item. Package Including: 1set HSS End Mill.
8 PC R8 END MILL HOLDER SET 3/16 1/4" 5/16" 3/8 1/2" 5/8" 3/4 1" FOR BRIDGEPORT
$
91.95
Buy It Now
$8.50 Shipping
Condition: New
Location: Huntington Beach, United States
| | | | | | | Our part# ALL-44028, Contains 1 each R8 holders: 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" diameters, ... moreFor double and single end(single end mill only for sizes over 5/8" Hardened and ground for durabilty and superior performance, Crafted from alloy forged tool steel, For Bridgeport type milling machines(or any others with a R8 spindle) Drawbar End Thread: 7/16"20, We combine shipping! Complete the buy it now and we'll send you a combined shipping invoice to pay from, For additional sizes. Sets, and great pricing on end mills please visit the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(please contact your local post office to determine estimated taxes and duty fees)
1/2", 9/16", 5/8" Mini Indexable End Mill Set TPG 221 222 Carbide Insert
$
36.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
3 PC Mini Indexable End Mill Set. Quantity: 1 Set. Body Length: 1". Wooden case INCLUDED.
80pcs End Mills 1/8" Shank CNC Router Bits CNC Milling Cutter Tool Carving Bit
$
41.93
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Specification: Type: Engraving Bit Set Material: Tungsten Carbide Coating: Nano Blue Coated Note: Light shooting and different displays may cause the ... morecolor of the item in the picture a little different from the real thing. Package included: 10pcs 3.175x17mm flat end mill 10pcs 3.175x17mm ball nose end mill 10pcs 3.175x17mm Single Flute End Mill 10pcs 15x0.1mm 3D PCB Milling Cutter 10pcs 20x0.1mm 3D PCB Milling Cutter 10pcs 30x0.1mm 3D PCB Milling Cutter 10pcs 0.8-3.0mm PCB milling cutter 10pcs 1.5-3.175mm PCB milling cutter.
10pcs 4-Flute End Mill Set, Metric CNC Milling Cutter Drill Bits Router Bits Cut
$
21.88
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Easy To Use: This End Mill Bits usually used to be assembled on milling machine and used for profiling, shoulder milling, finishing operations, general ... morepurpose machining of both ferrous and nonferrous materials.
90 Degree Indexable End Mill 3" Cutting Depth R8 Shank End Mill 5 Flutes+Key Set
$
66.83
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description Our indexable end mill is made of high-quality alloy steel with a quenching and oxidizing blackening treatment process, making it wear-resistant, ... moresolid, and durable. It is precisely fitted to the titanium-plated TPCN32PDTR blade, which not only can extend the service life but also improve the work efficiency. Package Included 1* Indexable End Mill 1* Allen Key.
1/8-1/2" 6 PIECE 4-FLUTE M2 BALL NOSE END MILL SET (8001-0007)
$
71.56
Buy It Now
$16.05 Shipping
Condition: New
Location: Chino, United States
1/8-1/2" 6 Piece 4-Flute M2 Ball Nose End Mill Set. Full radius cutting edge. AIR, POWER & HAND TOOLS. High speed steel. Center Cut. Wooden stand included. ... moreSingle end. Get It Quick!
3Pcs 3/8" 3 Flute End Mill Regular 2-1/2" Overall Length Carbide
$
42.41
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Features: 3/8" diameter x 1" length of cut x 2-1/2" overall length High velocity milling of Aluminum and other non-ferrous materials 3 flute and 45-degree ... morehelix allow harmonic balance at high speed condition and smooth cutting Improved surface roughness-cylindrical margin which is controlled tightly Maximum metal removal rate Mirror face excellent surface finish & superior chip evacuation Package Include: 3Pcs 3/8" 3 Flute End Mill UPC Does not apply Brand Thomletha Item Type End Mill MPN GM879440 Feature ESCP.
8Pcs/Set 2-12mm 4 Flutes Tungsten Carbide End Mill Milling Cutter CNC Tools
$
68.34
Buy It Now
Free Shipping
Condition: New
Location: China
Application material : High speed continuous cutting of hardened steel. Flute quantity:4. We will try our best to solve the issue. Model Number: NTG4-2-12mmHRC50. ... moreFull length:L=50,50,50,50,50,60,75,75mm.
4" 6-Flute KM12 100-32-6T Face Mill Cutter+R8 FMB32 Arbor+10* SEKT1204 Inserts
$
95.99
Buy It Now
Free Shipping
Condition: New
Location: San Diego, United States
Model: R8 FMB32. 45° indexable milling cutter, matching with standard SEKT1204 insert. 1 x R8 FMB32 Face Mill Arbor. Set including 10pcs SEKT1204 inserts, ... moregreat for shoulder milling, face milling and slotting, can fit a variety of materials.
4Pcs Carbide Taper Ballnose End Mill 1/8 Shank TiAlN Coated Ball Nose End Mill
$
22.55
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Type: Tapered Ball Nose End Mill. Shank: 3.175mm(1/8" Shank). 4pcs/set Tapered Ball Nose End Mill. Coating: TiAIN coated. Overall Length: 38mm.
5 PCS 4 Flute 1-1/2" Overall Length 3/8" LOC Carbide End Mill 3/32"
$
17.62
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification?? 3/32" 4 FLUTE SE REGULAR SOLID CARBIDE END MILL 3/8" LENGTH OF CUT 1-1/2" OVERALL LENGTH 1/8" SHANK DIAMETER POLISHED SHANK Package including?? ... more5 PCS 3/32" 4 FLUTE CARBIDE END MILL Brand ALL-CARB MPN Does Not Apply Warranty 1 year Item Type END MILL Helix Angle 30?? Helix Shank Diameter 1/8in Overall Length 1-1/2in End Type Single End Cutting Diameter 3/32in Flutes 4-Flute Material Carbide End Mill Type CARBIDE END MILL UPC Does not apply Custom Bundle No Bundle Description No Modified Item No Modification Description No Modification Description No.
(10) - 0.80mm (.0315") 2 FLUTE CARBIDE ENDMILLS - XXL Flute LN 1600.0315.256A1
$
36.00
Buy It Now
$4.50 Shipping
Condition: New
Location: Georgetown, United States
These endmills are made by Kyocera Tycom.The tools are unique and hard to find in that they have a. 256" flute length which is very long for this small ... moreof an endmill. The price of the sale is for 10 endmills.
5 Pcs 1/4" 4 Flute 2-1/2" Overall Length 3/4" LOC Carbide End Mill- TiALN COATED
$
32.50
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Specification 1/4" 4 FLUTE SE REGULAR SOLID CARBIDE END MILL 3/4" LENGTH OF CUT 2-1/2" OVERALL LENGTH 1/4" SHANK DIAMETER POLISHED SHANK Package including ... more5 PCS 1/4" 4 FLUTE CARBIDE END MILL Brand munirater MPN Does Not Apply Warranty 1 year End Type Single End Item Type End Mill Number Of Flutes 4 Helix Angle 30?? Helix Overall Length 2-1/2 in Cutting Diameter 1/4 in Shank Diameter 1/4 in Length Of Cut 3/4 in Material Carbide Quantity 5 UPC Does not apply Custom Bundle No Bundle Description No Modified Item No Modification Description No Feature ESCP.
5 Pcs 3/8" 3 Flute End Mill Regular Length Carbide 28584-5
$
56.94
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Features part #28584-5 3/8" diameter x 1" length of cut x 2-1/2" overall length High velocity milling of Aluminum and other non-ferrous materials 3 flute ... moreand 45-degree helix allow harmonic balance at high speed condition and smooth cutting Improved surface roughness-cylindrical margin which is controlled tightly Maximum metal removal rate Mirror face excellent surface finish & superior chip evacuation UPC 650229425018 Brand ALL-CARB Item Type End Mill MPN 28584.
10pcs Coated End Mill Cemented Carbide CNC Milling Cutters Tools Set
$
11.09
Buy It Now
Free Shipping
Condition: New
Location: China
They are of high strength, hardness and wear resistance and the cutting s are quite. cutting s, can be use for milling holes, and s on plates and the ... moreprocess will be. 10pcs x End Mills. If you do not receive our reply within 48 hours, pls.
40Pcs Milling Cutter End Mill CNC Router Bit Flat Ball Nose Set Kit
$
28.90
Buy It Now
Free Shipping
Condition: New
Location: United States
Feature: 1. Item Type: Milling Cutter. High Speed Steel: Forged with high speed steel material, which enables high efficiency in milling and cutting as ... morewell. 10 x 0.8-3.0mm PCB Milling Bit. 10 x 3.175x17mm Ball Nose Mill.
4pcs 4 Flutes Tungsten Carbide End Mill Set Milling Cutter Tool HRC50 3x4Dx50L
$
26.69
Buy It Now
Free Shipping
Condition: New
Location: Montclair, United States
6pcs/set 4 Flute End Milling Cutter Set 1/8",3/16",1/4",5/16",1/2",5/8"
$
14.85
Buy It Now
$5.00 Shipping
Condition: New
Location: China
6pcs 4 Flute End Mill Cutter. Usage:CNC milling machine. 4 Flute End Mill Cutter. We will try our best to solve the issue. We will reply you ASAP.
2 Pcs Morse 2 Flutes 7/16 in High Speed Steel End Mill Set, Made in USA
$
20.97
Buy It Now
Free Shipping
Condition: Used
Location: Sacramento, United States
We work hard to include a lot of pictures of each item. We will do our best to make it right. Most of them are in used in excellent condition.
5pcs HSS 4 FLUTE 1/4 END MILL Cutter CNC BIT Tool Set 3/16*1/4*3/4*2-1/3
$
10.84
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
Material: HSS. 5Pc 4 Flutes End Mill Cutter. Usage: CNC milling machine. Excellent work piece ,Dubbed Corners, high efficiency. Finer surface finishing, ... moreno roughness cylindrical margin. Inner Arc Design - long lasting,excellent wear resistance, increased lubricity and faster rate.
5 PCS 3/32" 4 Flute 3/8" LOC 1-1/2" Overall Length Carbide End Mill US
$
14.40
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Feature: 3/32" 4 FLUTE SE REGULAR SOLID CARBIDE END MILL 3/8" LENGTH OF CUT 1-1/2" OVERALL LENGTH 1/8" SHANK DIAMETER POLISHED SHANK Specifications: Material: ... moreSolid Carbide Length Of Cut: 3/8 in Cutting Diameter: 3/32 in Shank Diameter: 1/8 in Overall Length: 1-1/2 in Number Of Flutes: 4 Tool Coating: None Condition: New Package List: 5× 3/32" 4 Flute Carbide End Mill.
8 Pcs Niagara Cutter 35242 and Morse Assorted Sizes End Mill Set, Made in USA
$
74.97
Buy It Now
Free Shipping
Condition: Used
Location: Sacramento, United States
We work hard to include a lot of pictures of each item. We will do our best to make it right. Most of them are in used in excellent condition. You will ... morereceive the item that's in the pictures.
10Pcs 6mm 3 Flute End Mill carbide For Aliuminum DLC Coated CNC mill HRC55
$
62.98
Buy It Now
Free Shipping
Condition: New
Location: China
2 Flute Flat End Mill. 4 Flute Flat End Mill. 2 Flute Ball Nose End Mill. 4 Flute Ball Nose End Mill. Coating :DLC coated. 1 Flute Spirl End Mill. 2 Flute ... moreFlat Spiral End Mill. 3 Flute Flat End Mill.
3/4" 4 Flute Carbide End Mill 1-1/2" Length Cut 4" Overall Length New
$
45.65
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Feature: 3/4" 4 FLUTE SE REGULAR SOLID CARBIDE END MILL 1-1/2" LENGTH OF CUT 4" OVERALL LENGTH 3/4" SHANK DIAMETER POLISHED SHANK Specifications: Material: ... moreSolid Carbide Length Of Cut: 1-1/2 in Cutting Diameter: 3/4 in Shank Diameter: 3/4 in Overall Length: 4 in Number Of Flutes: 4 Tool Coating: None Condition: New Package List: 1× 3/4" 4 Flute Carbide End Mill.
10 pc Tin Coated End Mill Set 2 and 4 Flutes Cutting tools Endmill CMT
$
189.99
Buy It Now
Free Shipping
Condition: New
Location: Long Beach, United States
3/8" Shank : 1/4" 2 flutes and 1/4" 4 flutes. 3/8" Shank 3/8" 2 flutes and 3/8" 4 flutes. 1/2" Shank : 1/2" 2 flutes and 1/2" 4 flutes. 5/8" Shank : 5/8" ... more2 flutes and 5/8" 4 flutes. 3/4" Shank : 3/4" 2 flutes and 3/4" 4 flutes.
Shars CNC 1" 90° Indexable End Mill APKT Insert W/Certificate New save $110 P[
$
37.95
Buy It Now
$11.80 Shipping
Condition: New
Location: Saint Charles, United States
Choose APKT insert for steel or Aluminum. Insert Size: APKT 1604 (ISO1604). Benefit from the 90 degree lead angle allows efficient square shoulder milling ... moreand ability to machine workpiece with weak structure or thin walls over 45 degree face mill.
3Pcs 3/8" 3 Flute End Mill Regular Length Carbide High Velocity Milling
$
31.47
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Features: 3/8" diameter x 1" length of cut x 2-1/2" overall length High velocity milling of Aluminum and other non-ferrous materials 3 flute and 45-degree ... morehelix allow harmonic balance at high speed condition and smooth cutting Improved surface roughness-cylindrical margin which is controlled tightly Maximum metal removal rate Mirror face excellent surface finish & superior chip evacuation Package Include:.
8pcs Carbide End Mill Set Tungsten Steel Milling Cutter Tool 2-12mm 4 Flutes Kit
$
38.74
Buy It Now
Free Shipping
Condition: New
Location: China
Type: milling cutter. Blade length: 12mm, 11mm, 11mm, 10mm, 15mm, 20mm, 25mm, 28mm. Use: carpentry, drill machining tool, family and general construction/project ... moreuse. The blade is covered with a coating, the high-speed roughing of the hot material can be finely processed to reduce the number of tool changes.
SHARS 3" 90° INDEXABLE FACE END MILL R8 ARBOR 6FL APKT CERTIFICATE P[
$
82.95
Buy It Now
$15.50 Shipping
Condition: New
Location: Saint Charles, United States
INSERT STYLE APKT. 5PCS APKT 33 PM YBG202 Insert. for Steel 5PCS APKT 33 LH YD101 Insert. for Aluminum 10pcs APKT 1604 Insert for Steel. INDEXABLE MILLING ... moreCATEGORY End Mill. SHANK SIZE R8. Shank size: R8.
M.A. Ford BUR-90000-J 1/8" Shank 1-1/2" OAL & 1 Unbranded Carbide End Mills USED
$
15.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Clarkston, United States
1/8" Shank 1-1/2" OAL. One is M.A. Ford with 8 pieces and. M.A. Ford BUR-90000-J.
7Pcs 4 Flutes Tungsten Carbide End Mill Set CNC Milling Cutter Tool 1-8mm HRC50
$
38.84
Buy It Now
Free Shipping
Condition: New
Location: China
Model Number: M1-8 HRC50. Highest cutting hardness: HRC50. KVS Features: HRC50 For general steel alloy steel mold steel. 7PCS Nitrogen Coated Straight ... moreShank 4 flutes End Mill set CNC tool 1MM-8MM. Blade length: L1=3,6,8,11,13,16,20mm.
10PCS Tungsten Carbide End mills HRC70 4Flutes Milling Cutter CNC Cutting Tools
$
41.47
Buy It Now
Free Shipping
Condition: New
Location: China
Chamfer End Mill. Aluminum Milling Cutter. PCB Milling Cutter. Type : Flat End Milling Cutter. Material:Tungsten steel. Other CNC tool end mill. CNC Engraving ... moreBit Set. Corner Radius End Mill.
5pcs 6mm 4 Flute Tungsten Carbide Flat End Mill for steel CNC milling cutter
$
47.21
Buy It Now
Free Shipping
Condition: New
Location: China
Chamfer End Mill. Aluminum Milling Cutter. PCB Milling Cutter. 2 Flute Flat End Mill. 4 Flute Flat End Mill. Type : Flat End Milling Cutter. 2 Flute Ball ... moreNose End Mill. 4 Flute Ball Nose End Mill.
10 PC HSS 2 Flut End Mill Set Tin Coated Single End Shank Mills Sz: 3/16''-3/4''
$
44.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
10 PC 2 Flute HSS End Mill Set. - 3/16 x 3/8 HSS. - 1/4 x 3/8 HSS. - 5/16 x 3/8 HSS. - 3/8 x 3/8 HSS. - 7/16 x 3/8 HSS. - 1/2 x 1/2 HSS. - 9/16 x 1/2 ... moreHSS.
1/2 x 31/32 x 3/4" Indexable T Slot Milling Cutter CCMT W/Cert. save $268 P]
$
49.50
Buy It Now
$11.80 Shipping
Condition: New
Location: Saint Charles, United States
Shars 1/2 x 31/32 x 3/4" Indexable T Slot Milling Cutter CCMT W/Certificate New. CCMT 21.51HM YBC 252 Insert. For milling, roughing and finishing to make ... morea T-Slot at high speeds and feeds. Variety insert grade available for alloy steel, stainless steel, and aluminum machining.
3/4'' Shank 45 90 Degree Little Hogger End Mill Set 1'' Head 2 Flutes SNMA RNMA
$
52.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
3 PC Little Hogger End Mill Set. Shank: 3/4". Can Be Run At 1600 RPM At An Average Rate of 12"/Minute. Head Width: 1". Quantity: 1.
Ten Niagara 3/16" HSCO 4-Flute Single-End End Mills
$
9.99
Buy It Now
$8.95 Shipping
Condition: Used
Location: Ionia, United States
Ten Niagara 3/16" USA HSCO four-flute single-end end mills. Show signs of very little use. Sold as is. I do not know if these are new or not. The ones ... moreI have used cut fine.
LABLT 1/2" 4 Flute Long Carbide End Mill 2" Length Of Cut 4" Overall Length
$
22.76
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: 1/2" 4 FLUTE SE REGULAR. SOLID CARBIDE END MILL. 2" LENGTH OF CUT. 4" OVERALL LENGTH. 1/2" SHANK DIAMETER. POLISHED SHANK. Material: Solid ... moreCarbide Length Of Cut: 2 in Cutting Diameter: 1/2 in Shank Diameter: 4/2 in Overall Length: 4 in Number Of Flutes: 4 Tool Coating: None Condition: New Package Includes: 1× 1/2" 4 Flute Carbide End Mill .
8 Pcs HSS 4 Flute 1/16"-3/8" Corner Rounding End Mill Set Shank Milling Cutter
$
81.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
8 PC HSS 4 Flute 1/16-3/8" Corner Rounding End Mill Set. Weld-On Shank. Right Hand Cut. High Speed Steel. Quantity: 1. Set includes: 1/16" x 3/8" ; 3/32" ... morex 3/8" ; 1/8" x 3/8" ; 5/32" x 1/2" ; 3/16" x 1/2" ; 1/4" x 1/2" ; 5/16" x 1/2" ; 3/8" x 1/2".
1/2" 4 Flute 2" Length Of Cut 4" Overall Length Long Carbide End Mill
$
23.07
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Feature: 1/2" 4 FLUTE SE REGULAR SOLID CARBIDE END MILL 2" LENGTH OF CUT 4" OVERALL LENGTH 1/2" SHANK DIAMETER POLISHED SHANK Specifications: Material: ... moreSolid Carbide Length Of Cut: 2 in Cutting Diameter: 1/2 in Shank Diameter: 4/2 in Overall Length: 4 in Number Of Flutes: 4 Tool Coating: None Condition: New Package List: 1× 1/2" 4 Flute Carbide End Mill.
50mm Face Shell Mill 90 Degree 5 Flutes Double-Sided Milling Inserts WNMU080608
$
72.00
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
90 Degree Indexable Face Shell Mill 4 Flute 50mm Double-Sided Milling Inserts Indexable milling cutter 50mm 4 flutes Heavy duty milling 90° right angle ... morefast feed Tool shank is made of professional grade tool steel, heat-treated for CNC 5-axis finish machining. The surface is nickel-plated and rust-proof, durable and resistant to deformation. The inserts are made of high-end carbide with professional coating on the surface. Double-sided 6 edges, the cost performance is very cost-effective. Main processing materials steel, stainless steel, cast steel, cast iron. Items include MFWN900504T22 1PCS WNMU080608 10PCS.
Roughing Face End Mill 63mm 4 Flute 75 Degree For APMT1135 R8 FMB22 Arbor
$
93.00
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Roughing Face End Mill 63mm 4 Flute 75 Degree For APMT1135 R8 FMB22 Arbor Mainly used for 75 degree indexable milling cutter, machining diameter 63mm. ... moreThe tool holder is a one-piece R8 arbor type. The tool holder is made of high quality tool steel, heat treated and finished. Face milling tool holders are made of high quality tool steel, heat treated and nickel plated. No deformation and corrosion resistant. It is designed to perform 75-degree face milling operations that It is possible to reuse another cutting edge of the old indexable milling cutter blade APMT1135 This saves costs. Reduces production waste. Items include R8-FMB22 1PCS kap300r0634t22 1pcs.
BRAND NEW 10pc HSS END MILL SET 2 Flutes 3/16 - 3/4" by 16ths
$
39.99
Buy It Now
$8.00 Shipping
Condition: New
Location: Garden Grove, United States
10pc HSS END MILL SET 2 Flutes 3/16 - 3/4" by 16ths. 10pcs 2FL HSS end mill set. Center cutting, High speed steel. 5/8" Shank 9/16" x 9/16". 1/2" Shank ... more1/2" x 1/2". 1/2" Shank 7/16" x 7/16".
8Pcs 4 Flute Solid End Milling Cutter Drills Bits 1/16"-1/2" HSS Slot Tool Set
$
15.98
Buy It Now
Free Shipping
Condition: New
Location: Fremont, United States
⭐Enhanced Cutting Performance: Milling Cutter Tool adopts with negative rake angle and large-core design, strengthening sharpness, making the cutting ... moreand chip removal more stable, improving machining efficiency.
20 pc Tin Coated M2 HSS End Mill Set 2 and 4 Flutes S/E Center-Cutting #1001-755
$
99.00
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights, United States
Made of M2 Titanium nitiride-coated high speed steel. Center Cutting Design Allows Mills To Be Used As Drills Function.
1" 90° INDEXABLE END MILLS R8 W/Certificate + 5pcs APKT 1604 Save $109.00 P[
$
67.95
Buy It Now
Free Shipping
Condition: New
Location: Saint Charles, United States
Shars 1" 90° INDEXABLE END MILLS R8 W/Certificate + 5pcs APKT 1604 New. 5 pcs APKT 1604 Inserts included. 5PCS APKT 33 PM YBG202 Insert. for Steel 5PCS ... moreAPKT 33 LH YD101 Insert. for Aluminum 10pcs APKT 1604 Insert for Steel.
10x 1/8" Double Flute Spiral Upcut Shank End Mill CNC Router Bits Tool Set US
$
13.41
Buy It Now
Free Shipping
Condition: New
Location: United States
Flute length: 17mm. These bits work well and stay sharp. Leather Speed Ball Training Punching Speed Bag Boxing for MMA Pear Punch Bag US. When you tried ... moreone of bits you got it to go at 300 mm/min with a layer depth of 2 mm and it was like going through butter (in 19 mm pine board), without the X/Y motors skipping.
BT30-FMB22-45 Arbor 400R 50MM Face End Mill Shell Cutter 10Pcs APMT1604 Inserts
$
51.99
Buy It Now
Free Shipping
Condition: New
Location: San Diego, United States
Model: APMT1604. 400R 90° indexable milling cutter, matching with standard APMT1604 insert. Set including 10pcs APMT1604 inserts, great for shoulder milling, ... moreface milling and slotting and 2pcs BT30-45° Pull Stud.
1-1/2" R8 90° Indexable End Mill + 3 TPG32 Inserts W/Certificate $69 Off P[
$
45.95
Buy It Now
$15.50 Shipping
Condition: New
Location: Saint Charles, United States
Shars 1-1/2" R8 90° Indexable End Mill + 3 TPG32 Inserts W/Certificate New. Shank Style: R8. of Inserts: 3. Includes 3 FREE Inserts. Insert type: TPG/TPU/TPC ... more321/322. Easy reference guide for insert number, screw, and other accessories is printed on the tool shank.
CARBIDE STUB END MILL 3/16" DIA 3/8" LOC 2 FLUTE 2" OAL STANDARD RHS HIGH HELIX
$
8.99
Buy It Now
Free Shipping
Condition: New
Location: Huntington Beach, United States
3 Pc Miniature Indexable End Mill Set 1/2'' Shank 00460510
$
71.56
Buy It Now
Free Shipping
Condition: New
Location: New York, United States
1/2" Shank. Each set contains 1 each of 1/2", 9/16" & 5/8" cutter with insert. Use standard TPG22 insert. The order will be processed and completed by ... moreautomatic warehouse system within 5 minutes.
10pcs Tungsten carbide end mill 1mm 12mm neck end mill set CNC Milling cutter
$
77.17
Buy It Now
Free Shipping
Condition: New
Location: China
Chamfer End Mill. Aluminum Milling Cutter. PCB Milling Cutter. Type : Flat End Milling Cutter. Other CNC tool end mill. 2 Flute Flat End Mill. 4 Flute ... moreFlat End Mill. 2 Flute Ball Nose End Mill.
90 Degree Indexable End Mill 3'' Cutting Depth R8 Shank End Mill 5 Flutes+Key US
$
66.83
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description Our indexable end mill is made of high-quality alloy steel with a quenching and oxidizing blackening treatment process, making it wear-resistant, ... moresolid, and durable. It is precisely fitted to the titanium-plated TPCN32PDTR blade, which not only can extend the service life but also improve the work efficiency. Package Included 1* Indexable End Mill 1* Allen Key.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
 In 

Former Listings  
 
ENCO STEP BLOCK SET MACHINE TOOLS MILL VISE
STEP BLOCK SET AS MACHINIST TOOL FOR MILLING MACHINE CLAMP DOWN USE. NOT PERFECT. OLDER TOOLS BUT WORK JUST AS WELL AS NEW. THE WOOD CASE SHOWS MORE WEAR THAN THE BLOCKS THEMSELVES WHICH APPEAR TO BE ALMOST NEW. SENDS TO USA ONLY! I ACCEPT OTHER FORMS OF PAYMENT. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1418364d7a5-0x104-
Mill Hold Down Bolts & Nuts Set
Mill Hold Down Bolts& Nuts Set. 30) Studs. 8) T- Slot Nuts, 6) Nuts, 6) Long Nuts. Fair Condition!
VINTAGE GARANTITO TRE SPADE STERLING SILVER SALT SHAKER AND PEPPER MILL SET
UP FOR YOUR CONSIDERATION IS A VINTAGE GARANTITO TRE SPADE SALT SHAKER AND PEPPER MILL SET- STERLING SILVER. MADE IN ITALY. THEY ARE APPROX. 2 INCHES TALL- THE PEPPER MILL IS SLIGHTLY TALLER. THEY ARE IN GOOD CONDITION. THANK YOU FOR LOOKING.
2 LARGE 7" PARALLEL CLAMPS SET UP CNC LATHE MILL MACHINIST HOLDING TOOL MAKER
You are bidding on A LOT OF 2 LARGE PARALLEL CLAMPS THEY ARE 7" LONG AND OPEN UP TO ABOUT 10" WIDE. THEY ARE IN GOOD SHAPE WITH SOME DINGS HERE AND THERE FROM USE. PLEASE SEE ALL PICTURES AND BID AS YOU SEE FIT. THIS CAME FROM A MACHINE SHOP THAT WAS OPEN FOR 48 YEARS AND THE OWNER RETIRED AND SOLD OFF ALL HIS EQUIPMENT AND TOOLS. I HAVE A LARGE AMOUNT OF TOOLS I WILL BE LISTING FROM THIS VERY NICE AND CLEAN ESTATE OVER THE NEXT WEEK. THERE ARE A LOT OF NICE TOOLS SO CHECK OUT MY OTHER AUCTION AS THERE MAY BE SOMETHING YOU MIGHT NEED. I CAN COMBINE SHIPPING IF YOU BUY MORE THAN ONE ITEM. BUT PLEASE WATCH WEIGHT OR ITEMS AS I MAY NOT BE ABLE TO SHIP THEM TOGETHER. PLEASE SEE ALL PICTURES AND BID AS YOU SEE FIT AND HAPPY BIDDING. THIS IS LOT 2 FOR MY REF. RULER NOT INCLUDED. Any questions. Please ask. Weight is 11 POUNDS SHIPPED. ... morePLE ASE NOTE INTERNATIONAL FIRST RATE SHIPPING BELOW. I insure all items that the post office offers insurance in that country. I do not set the cost of shipping. So please don't give me bad marks because the shipping was too high. I do combine purchases to save on shipping. So please wait for my invoice. I ship most items the day after payment is received-other than Sundays& holidays. The post office does not insure First Class International Mail. The post office no longer insures items to Great Britian. Ireland and some other countries. Please check with USPS.com to see if the post office insures to your country. For other countries, if you want your item insured, you have to select USPS International Priority Mail. Most international items have an extra charge added at customs. I can not change an item to gift or lower the cost. Insurance only covers the cost of the item on the custom's form. If you want to chance First Class with no insurance, please let me know before paying so I can add it as a shipping option. My shipping address is 3955 EAST M-72. Grayling, MI 49738. Please use USPS.com to calculate your shipping costs. Please use the eBay message system to co
ER32 Mill Collet Set 13 Pcs ER 32 + Syic in Hard Case - Machinist Tool Sets
ER32 Collet Set 13 Pcs Rego-Fix + Syic in Hard Case- Machinist Tool Sets This set appears to be in very good pre-owned condition. There are 18 pieces total seated in a hard case. There is no brand or model number on this case however some of the tools themselves have numbers. Please see the full description below for further information on these. Included with markings are: SYIC ER32 16-15 SYIC ER32 6-5 SYIC ER32 12-11 32 3/16#1- unmarked ER32 13/32" SYIC ER32 4-3 SYIC ER32 17-16 SYIC ER32 15-14#2 unmarked(looks brand new) 32 9/16- Marked on the side only#3 unmarked(looks used) SYIC ER32 3-2 SYIC ER32 19-18 32 11/16 ER32 21/32 SYIC ER32 16/17 Please contact us anytime. You can bid with confidence as I am very trustworthy and take great pride in my eBay presence! With ISALESUSA you are GUARANTEED: Good communications Smooth transactions ... moreSpeedy delivery FLAT RATE SHIPPING COSTS ARE FOR THE 48 CONTINENTAL STATES BUYERS LOCATED IN HI. AK or US TERRITORY PLEASE CONTACT US FOR A SHIPPING QUOTE WE SHIP EVERY DAY! ~ Monday- Friday*Any Special Shipping Requests Must Be Made Through EBay! MICHIGAN Residents will be charged MI State Tax. We Cannot Reimburse Return Shipping Costs. Thank you for looking at my listing and good luck bidding! GOD BLESS YOU AND THIS GREAT COUNTRY OF OURS! View My Other Items For Sale
Mill Clamp, Bolt, & Block Set
20) Pcs. 1/2" Studs. 4) 6" Clamps, 2) 4" Clamps, 2 sets of Step Blocks, 10) T" Slot Nuts, 10) Regular Nuts. Good Condition!
Georg Jensen STERLING Pepper Grinder Mill & Salt Shaker Set - ITALY
Georg Jensen STERLING Pepper Grinder Mill& Salt Shaker Set with Felt"Georg Jensen" bag for each MADE in ITALY Salt Shaker measures approx. 2 1/4" tall; Pepper Mill measures approx. 2 1/2" tall Overall in Good Used Condition- the base of the Pepper Mill has a few dings. There are some black tarnish marks both salt and pepper shakers. Shipping will be $6.95 by USPS Mail or FedEx Ground/ Home Delivery to USA NOTE: a $0.50 handling fee is included in the shipping charge to cover a new fee charged by Ebay- they now charge seller's(me) a 9% fee on the shipping charge! in addition to the 9% fee on the amount of the item) I have no choice other than to add this to the shipping/handling amount. I will ship worldwide! Contact me for a quote to your country. note: if you want to request a signature on delivery. You must let ... moreme know at time of payment} If bidding outside of USA. Pls contact me for shipping quote to your Country. I always package items very well for shipping Check my Feedback! As Always: Local Pickup in Little Rock. AR is always available at no charge NOTE: If paying with PayPal. You must have a"Confirmed Address" THANKS
8" Mill Set-Up Milling Dividing Head w/ 3-Jaw Chuck & Index Plate
Welcome! Up for sale is an 8" Mill Set-Up Milling Dividing Head w/ 3-Jaw Chuck& Index Plate. Very nice divding head with a great range! Index plate with following divisions; 30.41,43,48,51,57,69,81,91,99,111. It was made for use off the end of a mill, the chuck sits slightly below the table level. Put it on some blocks or build a riser for it, you've got every index you could ever need in 1 tool! Used in good condition. Feel free to email any que stions! SCT2743
MACHINIST TOOLS SET UP STEP BLOCKS GRIND INSPECTION MILL BRIDGEPORT
For your consideration 1 very large pair of step up blocks. These came from a old school machine shop that has closed. They are used and have some battle scars. Specs are when standing tall 8"x 6" x2 inches wide. The steps are 1"X 2"wide. The only markings/ casting# is 8SB Please see pictures. Not sure of the maker but they are old and the largest step blocks I have ever seen. Thier overall condition is very good usable condition with no cracks breaks etc. They weigh 9 lbs each. Please feel free to ask questions. Thank you for looking.
MACHINIST PARALLELS SET UP BLOCKS TOOLMAKER INSPECTION GRIND MILL BRIDGEPORT
For your consideration 1 pair of Large Nova set up blocks. These came from a old school machine shop that has closed. They are used and have some battle scars. Please see pictures. Thier overall condition is very good usable condition. Specs are 8"x2"x3inches high. They weigh 9 lbs each. Please feel free to ask questions. Thank you for looking.
TIFFANY STERLING PEPPER MILL GRINDER AND SALT CELLER w/ SPOON MID-CENTURY SET
Fine Things 4 sale- Family parts with a few treasures. things we liked- Stunning Top Quality Antique Kitchen wares- Old Copper Cookware- Sterling Holloware- Especially Nice Silverplate- OUR FAMILY ESTATE USED ITEMS/ FINE OBJECTS D'ART/ COLLECTION OFFERED ON eBAY. You too. Should invest in FineThings! Check our other items add us to your favorite sellers. As this year we must empty a family storage locker of things. Many more Sterling and Silverplate items to be listed. TIFFANY STERLING PEPPER MILL or GRINDER AND A GLASS LINED SALT CELLAR w/ SPOON- MID-CENTURY SET- CLASSIC REVERE LIKE DETAILS serve in grand high style! This was stored in the china cabinet in the original protective felt bags. Which will be included. I don't recall our family ever using this set and they appear to be in gift giving ready condition. No blemishes to note ... moreat all. The mill stands about 4" tall. 20th CENTURY- SUPERB TIFFANY STERLING SILVER- ELEGANT FORM WITH CLASSIC SIMPLE DETAILS- These are not made like this anymore. Offered here is an estate item with little of the expected patina of gentle use. This set is the quality one would expect from the fine maker/ brand of TIFFANY. Purchased in New York city long ago. It is in excellent condition for an antique- view pictures. See the pictures of the bottoms. This is an heirloom quality collection item. Collector's items. Yet eminently appropriate for contemporary use. Parents were serious about entertaining in a way I am not. My family invested in quality items for gracious living. CONDITION: VERY GOOD- keep in mind it is used from the last century- little to no evidence of use- older. Not brand new. As seen in pictures this looks nice! Great wedding, birthday or holiday time gift item. Lots of Really Great Stunning items to a dd to your collection. Starting each lot at very reasonable prices. Please review picture(s) for condition etc. Not new. But Used Good Estate Condition with expected use on treasured old items. No Monograms or Removals not noted- Some hand
100+ pc 5/8" Slot 1/2" Stud HOLD DOWN CLAMP CLAMPING SET KIT for BRIDGEPORT MILL
100+ pc 5/8" Slot 1/2" Stud HOLD DOWN CLAMP CLAMPING SET KIT for BRIDGEPORT MILL. Clamping Studs. Step Blocks, Flange Nuts, T Slot Nuts, T Slot Bolts. What we have here are all of the 1/2" clamping clampdown gear from a midsize shop who's owner retired. There is well over 100 pcs. The studs are 1/2" Step blocks, studs, hex head screws, bolts and threaded studs 3-8" and more. You will get exactly what is in the picture. NO RESERVE
Valenite End Mill Set 6 Pieces EndMill
Here is WHAT I BELIEVE TO BE a set of 6 Valenite End Mills. They appear to be in usable shape. The largest and the smallest appear to be missing the cutting inserts/blades. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 LOOK AT THE PICTURES CAREFULLY AND BID ACCORDININGLY! I HAVE NO WAY OF KNOWING HOW OR IF THIS SET FUNCTIONS! ASK ALL QUESTIONS BEFORE BIDDING. I WILL ANSWER AS BEST I CAN. I KNOW NOTHING ABOUT THESE SORTS OF ITEMS. The storage case is well used. But still functions. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-141dd60f575-0x101-
V BLOCK machinist set up tool mill milling machine grinder 1 3/4 x 2 1/8 x 2 1/4
good used V block mfg unknown approx 1 3/4 x 2 1/8 x 2 1/4 will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
(5) PIECE SET KWIK SWITCH 200 ENDMILL HOLDERS SIZES LISTED END MILL LOT C5827
SquareTrade © AP6.0 LOT C5827 FREE SHIPPING IN USA WE ARE OFFERING A(5) PIECE SET OF KWIK SWITCH 200 END MILL HOLDERS. SIZES ARE: 3/8. 1/2, 5/8, 3/4, AND 1" UNIVERSAL ENGINEERING THESE HOLDERS ARE IN GREAT CONDITION. WE HAVE MANY MORE KWIK SWITCH 200 LISTED& ALSO LISTING MORE. ANY QUESTIONS CALL 937-320-2298 ADD US TO YOUR!
Machinists USA Work Stop set for mill 1/2" stud size
cheap shipping- HEY- take a look at the huge amount of my stuff which ships for $2.00 to 3.50-does anyone else do that? why get boned on shipping? USA USA USA. PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they ... morewould give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15
Cerec calibration set for compact mill
Calibration set for Cerec compact milling machine jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-141eeb26135-0xff-
2 Steel Angle Threaded Set-up Grinding Blocks Machinist Gunsmith Mill Tools lot
Ebay Base This auction is for a 2 precision ground and hardened angled setup blocks. These are large heavy blocks. mot sure of the exact function. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
Machinist Precision Set Up Block 90 Degree Angle Plate Mill Grinder 3" x 3"
This listing is for a precision machinist set up block. The angle block 3" x 3" Zip Products Inc NO 22 Features graduated markings that allow for precise changing of angle of your workpiece. Item is in excellent cosmetic condition with no rusting or pitting. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any ... moreitem requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities w
Milling Machine Block and Clamps Kit/Set metalworking mill engineering tools
Used set of milling clamps. It looks like they have not done a lot of work. Some look unused. These were part of a lot of tools i purchased at auction so i do not have extensive knowledge of them. So i apologise for the lack of technical info. Fast courier delivery. Or collect if you prefer. Feel free to ask any questions, i'll do my best to help. THE INTERNATIONAL SHIPPING PRICE IS NOT CORRECT!I do offer international shipping. But please email with your address details BEFORE bidding for an accurate quote to your country. Postage will be very prompt and delivered by courier or royal mail depending on item type, usually within 48hrs of cleared payment if in the UK mainland.TO AVOID UNNECESSARY DELAYS PLEASE ALWAYS PROVIDE A CONTACT TELEPHONE NUMBER TO PASS ON TO THE COURIER.
Set of 10 HUGE Antique Linen Damask Napkins, Monogram,Mill Mark,26 x 27" Mint
This auction features a set of 10 regal antique dinner napkins. They are high quality white linen damask and are"lapkins" Measuring 26 1/2 x 27 1/4" Thick, silky smooth, luxury linen with a classic pattern featuring a center monogram. Either way it is turned, it is elegant padded embroidered script. They are hand hemmed, and have a clover mill mark in the corner. One napkins is a shade deeper in color but other then that these napkins are pristine- there are no spots, stains, holes or weak spots. Recently laundered, pressed, and ready to wow your guests.
MACHINIST TOOLS LATHE MILL GREENLEE STANDARD PUNCHES & DIES 2 1/2"-4" SET
PRECISION MACHINIST TOOLS GREENLEE STANDARD PUNCHES& DIES 2 1/2"4" SET(TOTAL 10 PIECES) THE FOUR PIECE PUNCHES& DIES ARE USED BUT IN VERY NICE WORKING CONDITION THE ORIGINAL METAL BOX HAS OBVIOUS SIGNS OF WEAR& RUST PICTURES SHOW RULER TO DETERMINE SIZE*PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY ... moreOTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible.
Starrett no.240 pin vise set machinist mill
Starrett no. s 240 set pin vises. previous owners name etched in each tool. Please see pics. also name on outer package
Antique NOS 1969 Macarthur The Pepper Mill/Grinder Hand Rubbed Walnut Set Unused
Antique NOS 1969 MacArthur Pepper Mill/Grinder Set. Has Original Box And Paperwork. Hand Rubbed Black Walnut Wood. Pepper Mill/Grinder Size:7.5" Tall X 2.75" Diameter Salt Size: 6.5" Tall X 2.75" Diameter Straight out of Estate Sale See: Photo Note To Buyers: If shipping is overstated I refund money back to buyers I use Ebay shipping.You will get am email with tracing number I print shipping cost on all my shipping labels.I also buy and use Ebay shipping insurance& delivery comformation is not part of the cost printed on the label. You will need to add that to your total cost Email any questions you may have Check out my items Be sure to add me to your favorites list
Set of 12 Beautiful Linen Damask Dinner Napkins, Mill Mark
This auction offers a gorgeous set of 12 linen damask dinner napkins. These are excellent quality. Bright white, hand hemmed, and measure 21 1/2 x 21 3/4" They are silky smooth and have a wonderful classic pattern with a tiny mill mark in each corner that resembles an L. They are in excellent condition, with no spots, stains, weak spots or holes. Recently laundered, pressed, and table ready.
Bridgeport R8 End Mill Tool Holders Set of 6 Used
Bridgeport R8 End Mill Tool Holders Sizes: 3/4" 2 at 7/8" 2 at 1" 1 1/4"
Set of 5 Antique Vintage American Paper Tube Co. Knitting Mill Yarn Bobbins
Set of Five 5 Vintage American Paper Tube Co Spinning Top Knitting Mill Yarn Bobbins 14.25" in length X 2 3/8 at base and 1 7/8" at the top The base of each has a brass ring/cap on it. Even though these are paper. They are thick and solid. Great ribbed pattern from top to bottom and probably have some type of shellac on them. Each carries the American Paper Tube Co. logo that appears to be in the shape of a wooden top. Gotta love it! In very nice condition as shown in photos/ the color/patina is awesome. These have been sitting and displaying here on a shelf for years and I think it is time for another knitter to enjoy them! Figured I would try and sell as a set before I sell them off individually. I find collections show much better when there are a few of the same items. Everyone seems to comment on these unusual items here! Not ... moresure you will find a nicer set! USA SALES ONLY/ NO INTERNATIONAL SHIPPING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-142dba22364-0xfc-
Vintage Plastic An Old Cape Cod Mill Souvenir Salt & Pepper Shaker Set ~3" tall
You are bidding on the salt and pepper shaker set named in the title and pictured above. I have several other Salt& Pepper Shakers listed this week. So be sure to! Powered by The free listing tool. List your items fast and easy and manage your active items.
NOBLE HALL WIND MILL CERAMIC TEA SET 10 PIECE NEW - VGC WITH BOX
SO NICE. NEW. NEVER USED. NOBLE HALL NO. 6841 MINIATURE BLUE& WHITE with WIND MILLS AND BLUE TRIM 10 PIECE* CERAMIC TEA SET. IN ORIGINAL BOX. GOOD CONDITION ROUND SERVING TRAY 3 1/2" WIND MILLS& COUNTRY SCENE. TEA POT WITH LID 2" SUGAR BOWL WITH LID 1" CREAMER 3/4" 2 TEA CUPS 1/2" 2 SAUCERS 1" HAVE PICTURES OF WIND MILLS. NO CHIPS or CRACKS* BOX GOOD CONDITION.ONE DAMAGED AREA WHERE PRICE WAS ON BACK OF NO DATE ON BOX. BOUGHT AT ESTATE SELL ABOUT 10/ 15 YEARS AGO? PLEASE. ASK QUESTIONS AND WILL ADD ADDITIONAL PICTURES. WILL COMBINE SHIPPING& USE LOTS OF PACKING THANK YOU
Large 10" solid wood salt and pepper set...with pepper mill
Very nice solid wooden set of salt and pepper shakers with beautiful wood grain.large 10" tall x 2 1/2" wide. Tops screw off for filling.pepper shaker has a built in pepper mill.Grinder.with brass finial. In excellent condition. Prompt shipping to US only.and thank you!
Egypt 1914 De La Rue part set to 200 mill. MNH VF ( Both WMK's included )
1st row of stamps shows Narrow WMK. 2nd and 3rd rows show Wide WMK. All are in MNH VF condition. Nice part set. Shipping is Worldwide by Registered mail. S hipping charges are 5 CAD$ for your first item and 2 CAD$ for each additional item purchased. Accepted payment methodes include PAYPAL. SKRILL
Lemax Mill Stream Fork 10 Piece Christmas Village Set 2004 - In Box!
This item comes exactly as pictured! Send us a message if you have any questions or need any additional details! Standard shipping is via first class mail. If you choose the expedited method it is via USPS Priority Mail. Either way. I will ship very quickly after payment is made(usually the next business day depending on when the payment is made! Email me any questions you may have! The EXACT item for sale is pictured in this listing and everything included is pictured! Posted with
Set of Die Cast Miniature Pencil Sharpners Coffee Mill and Camera
You are bidding on this used set of Die Cast Miniature Coffee Mill Pencil Sharpner and Camera. There is some wear to the original box. Measurements: 3"T. This item was purchased at an estate sale so I have no history on it. It is coming from my smoke free home. Winning bidder to pay shipping. I do not ship internationally. PayPal accepted only. Thank you for bidding and good luck.
VINTAGE 3-1/2" Keyakiwood Pepper Mill Set M.I.JAPAN W-6693
VINTAGE 3-1/2" KEYAKIWOOD PEPPER MILL SET W- 6693 MADE IN JAPAN* You are bidding on a pre-owned vintage 3-1/2" Keyakiwood pepper mill set.Made in Japan. It is in very good used condition.And comes in its original box. Most of my used items are from Estate Sales.Flea markets,Thrift stores and Garage sales and are sold as is.I will try my best to describe them as best as I could.Please do not hesitate to ask questions. Please email me with any Questions. Please excuse any light reflections in the Picture. Payment Must Be Received Within Five(5) Days After Notification By Invoice. Items Will Be Shipped Promptly Within 24 Hours After Payment is Received. Payment By Paypal Only. Cost of Shipping and Handling- $4.95 for Shipping and Handling. Includes Tracking/Delivery Confirmation) Powered by The free listing tool. List your items fast ... moreand easy and manage your active items.
MACHINIST TOOL LATHE MILL MITUTOYO 103-907 MICROMETER SET 0"-6" STANDARDS 1"-5"
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 UP FOR AUCTION: PRECISION MACHINIST TOOLS FOR LATHE. MILL, GRINDING MITUTOYO 103-907 MICROMETER SET 6 MICROMETERS 0"6" 5 STANDARDS 1"5" PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* THIS SET CAME FORM A VERY WELL MAINTAINED MACHINIST SHOP I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE ... moreTHE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated.
1930 Big Bear Valley Ca Old Mill Movie Set Cedar Lake RPPC
Postaly unused with undivided back. EKE in stamp area. RPPC has some fine surface scratches.
LENOX LIDO SALT & PEPPER SHAKER GRINDER MILL SET
PLEASE VISIT OUR eBay STORE for MORE ITEMS LIKE THIS ONE! Black Schnauzer Antiques* Just click on the Black Dogs above! LENOX LIDO SALT& PEPPER SHAKER GRINDER MILL SET* Up for purchase is a Lenox Lido salt& pepper shaker set. This set stands 7-1/2" tall the top of the nut and the base is 2-1/2" across. The set is in great condition with no chips. Cracks or chips. GOOD LUCK BIDDING! PLEASE VISIT OUR eBay STORE for MORE ITEMS LIKE THIS ONE! Black Schnauzer Antiques* ~ Just click on this link to take you directly there. ~* Any Questions? ASK BEFORE YOU PLACE YOUR BID! Many of the items we sell are Vintage. So please understand that they will not be perfect. We pride ourselves on giving as accurate a description as possible. WE NEVER REFUND SHIPPING CHARGES. UPS OR USPS HAS THAT MONEY. Check out our feedbacks and bid with confidence. ... moreBuyer pays Shipping unless ad specifies different. Pay Pal will go out in 1 day. Except on Friday, Saturday or Sundays, we are closed. California residents please add sales tax. I am always happy to combine shipping if items can be safely packaged together. INTERNATIONAL BUYERS= PLEASE NOTE: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. We do not mark merchandise values below value or mark items as‘gifts’ US and International government regulations prohibit such behavior. Please note that I have no control on how long it takes for CUSTOMS to process your package before delivering it to you. Pay me securely with any major credit card through PayPal!
BIG V BLOCK machinist set up tool mill milling machine grinder shop press angle
BIG V BLOCK machinist set up tool 7" x 5" x 4" Heavy duty Weight 29lbs as shown very lightly used if used at all There is 4 of these available winning auction bid can take as many as they choose for that price i can ship up to 2 of these for 12.50 Shipping each additional 2 will cost 12.50 shipping Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive. All items are sent same day if bought and payed for before 12.00 noon Monday- Friday. Before 10Am Sat. If not it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please visit and subscribe to my eBay Store for more great items and friendly. Reliable customer service. Thank You For Viewing
mill drill boring head set MT# 5 shank
enco boring head set with mt. 5 shank looks just about new what you see in pics is what you get check out my other auctions with machinist stuff
BROWN&SHARPE MACHINIST TOOLS LATHE MILL Combination Set Protractor Square Head
These are in very nice condition. Brown and Sharpe' stamped on one item. But there is no mark for part number. Hardened' and a patent no. on one also. Questions welcomed.
Brown Sharpe Gage Block Set 61 pcs Machinist Tool Die Gunsmith CNC Mill
Brown Sharpe Gage Block Set 61 pcs Machinist Tool Die Gunsmith CNC Mill This is an old set. You get a total of 61 pcs Please see pictures for details We are not selling you pictures that we got off the web. We actually have the items in stock. We took pictures for each and every unit including the Serial number and the exact specifications label. when available) to ensure that you are getting what you bid for. FREE SHIPPING in the lower 48 states* AK. PR, HI, and any other offshore territories should use US postal service option(not free) Please Check out my! to find more great deals on Motorola and radio equipment. Location B2B- Return Policy: Unless stated otherwise. You may return product within 7 days of receipt. Product must be returned in the condition it was received with all accompanied accessories and literature including the factory ... morecarton. Buyers may return this item if defective. Buyer is responsible for return shipping cost both ways. Please contact us first before returning your item. Please see my other items on Bay for great deals
14 Set-up Workholding Blocks Parallel Machinist Gunsmith Mill Grinding Tools lot
Ebay Base This auction is for a 14 blocks. Some ground and hardened& some are parts cobalt bits. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
ANGLE SETTING FIXTURE PLATE BLOCK GRINDER MACHINIST TOOL LATHE MILL SET ANGLES
ANGLE SETTING FIXTURE PLATE BLOCK ADJUSTED WITH ALLEN WRENCH(INCLUDED) NICE CONDITION AS SHOWN CLEAN NICE WORKING SIZES ARE SHOWN IN PHOTOS APPROX 8" LONG 4-1/2" TALL Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos and described is the items you will receive. Items will be sent as soon as payment is received. Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please subscribe to my eBay Store& Facebook page For More Great deals and offers At Hanmores Tool Shed You Will Receive a friendly. Reliable customer service. And Great deals. Thank You For Viewing
6" Wide Mill Milling Set-Up Vise, Jaws Open 9"
Up for sale here is a 6" Wide Mill Milling Set-Up Vise. Jaws Open 9" Unknown manufacturer. Includes vise handle. Used in good condition. Feel free to ask any questions. SCT3085
SET of JAWS for 6" KURT VISE mill holder tool MITEE BITE TALON GRIP 32068
set of good used jaws- fit a 6" Kurt vise Mitee Bite Talongrip 32068 will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14322433024-0x109-
BEAUTIFUL LIBERTY FALLS VILLAGE SET BAKERY TRAIN STA. MILL GEN STORE TAVERN PLUS
UP FOR AUCTION IS THIS BEAUTIFUL SET(6) PIECE OF LIBERTY FALLS VILLAGE THIS SET INCLUDES THE CLARA'S BAKERY AND RESTAURANT. LIBERTY FALLS TRAIN STATION, DUFFY'S MILL, TULLEY'S GENERAL STORE, BLUE WHALE TAVERN AND FIRST PRAIRIE CHURCH AND SCHOOL ALL ARE IN ORIGINAL BOX IN ORIGINAL SET BOX. THESE HAVE BEEN DISPLAYED WONDERFUL ADDITION TO YOUR CHRISTMAS DECOR. Great find. You will not be disappointed CHECK OUT MY OTHER AUCTIONS. I HAVE MANY LISTINGS AND I DO DISCOUNT SHIPPING ON MULTIPLE ITEMS PLEASE ADD 3.00 FOR SHIPPING TO HAWAII. ALASKA AND PUERTO RICO ALL MY ITEMS COME TO YOU FROM MY SMOKE FREE HOME THANK YOU FOR LOOKING
Vintage Oak / Wooden Salt & Pepper Shaker Mill Set ~ 4" high ~ Works Well!
Very Nice set of Oak/ Wooden Salt Pepper Mill Shakers 4" high x 1 3/4" Unmarked on the bottom Silver accents Nice working condtion! LISTING TERMS FOR BIDDERS· If you have any questions about this listing. Please ask and I will answer(the answers will be posted to the listing so other eBay shoppers will have the same info) I guarantee shipment in 1 business day after payment. Returns are accepted. Return it to me within 14 days after you receive the item. You pay postage back, and I refund the purchase price. Please write to me before returning the item. I will provide feedback on you as a buyer after you provide feedback on me as a seller. Please do provide feedback. As it leads to eBay fee discounts for good sellers. I want you to be happy with your purchase. If you have an issue with your purchase. Please contact me so we ... morecan resolve the issue before you go away less than satisfied(and before you provide feedback) I want you to be happy with your purchase. ADDITIONAL INFO ON MY SALES· Because of guaranteed quick shipment. Please pay as quickly as you can so I can fulfill your purchase and have it on its way. I expect payment within 72 hours of purchase, but if you know it is going to take longer I am happy to work with you if you ask. Just let me know quickly! Please look at my other items for sale. I combine shipping on multiple purchases. You can save a lot by having items shipped together. Thanks for your interest. Check out the other items I have for sale as we work to reduce the amount of stuff in our home. We are selling things that are ours: these are all our items that are no longer needed(or maybe never needed! Our home is clean and smoke free and so are the items we sell. Putting our stuff up on eBay feels a lot like recycling: we want these items to find places where they are wanted and useful. All the best and Happy Bidding!
Valenite Vari-Set 40M-BB3 Flash Change Adjustable Boring Bar For Mill or Jig Bor
Greetings. You are bidding on a great estate find from a retired machinist. Its a Valentine 40M-BB3 adjustable boring bar. Its a nice used bar for quick change mill or maching center. Includes the wrench and one used insert. Tool is about 6" in length from the insert to the mounting flange and about 2.500 in dia. I tested the movement and it is good and tight and moves as it should.I see no damage. Just the prior owner removed his name with a small grinding wheel. It won't affect the operation of the tool what so ever.What you see is what you will receive. Includes one used insert and the adjusting wrench. Shipping to be in a flat rate box because of weight! Fixed shipping price for the USA states only. NO OUT OF THE COUNTRY SHIPPING! THIS MEANS CANADA TOO! Yes I combine shipping. I'll put as much as I can into one flat rate ... morebox. If I need to go up in size it will be stated in your invoice. Please email any questions before bidding. Good luck! Payment is expected within 3 business days!
Beautiful set of 12-2000 canadian Mill.quarters
I have a nice set of 12 Millinium 2000 canadian quarters for auction here.There is a quarter for each month.As follows:Achievment.Celebration,Creativity,Community,Family,Freedom,Harmony,Health,Ingenunity,Natural Legacy,Pride,and Wisdom.These quarters are graded as Au/or Au+.All are in 2x2 coin envelopes.the picture does no justice here,sorry) These will be mailed out to highest bidder.Who wins the auction by regular Canada Post mail.Part of the shipping fees are to cover stamps,envelopes,2x2 coin holders.Please.check out my other auctions.if you win more than one.i will compensate some of the shipping with bonus coin(s)or reduce the shipping. Thank you for looking.Have a great day!
Stryker Tessier Osseous Microtome (TOM) Bone Mill Set - Fast Fed Ex Shipping
1 Available Stryker Tessier Osseous Microtome(TOM) Bone Mill Set. Includes the following: 01-15402 BCDY With Base Plate 01-15406 Ratchet Handle 01-15407 TOM Plug 01-15409 Bone Chip Receiver 01-15415 Cutting Cylinder 01-15417 Cutting Cylinder. International Shipments require a valid street address in English. And telephone number. International fee covers import duties, if applicable. This item is being sold AS-IS. With no warranty. A resale certificate and/or a states sales tax is required with a purchase in the following states: Washington. California, Idaho, Louisiana and Arkansas Check out my other items! Be sure to add me to your favorites list! Sign up for my email newsletters by adding my eBay Store to your Favorites ABOUT BPI MEDICAL BPI Medical. Inc. is a medical instrument solutions company specializing in the repair and sale of ... moresurgical equipment for hospitals and surgery centers internationally. Our core competencies lie in the repair and refurbishing of rigid& flexible endoscopes, hand held instruments, motorized surgical hand pieces. BPI Medical continues to grow rapidly by providing better customer service, higher quality repairs, and fast turn times. BPI Medical is also a proud authorized repair facility for Codman Johnson& Johnson, and is ISO compliant through Johnson& Johnson. In addition. We have expanded our sales and distribution to encompass online sales of used surgical equipment, instruments, and accessories. BPI Medical offers a unique service to hospitals and surgical centers through our consignment program. BPI Medical can help you sell your pre-owned medical instruments and equipment. We specialize in the consignment of a wide variety of instruments and equipment from hospitals and surgery centers in the following fields: medical imaging. Endoscopy, orthopedics, electrosurgery, and laboratory medicine. When you are ready to sell your used medical equipment. There are many advantages to consigning your items with BPI Medical. One of the primary benefits is reduction in costs.
Chef Specialties 06301 Salem Salt Shaker/Pepper Mill Set 6 inch, Black
Salem Salt Shaker/Pepper Mill Set 6" high ebony finish stainless steel grinding mechanism made in the USA
Vtg "Hilts" ALUMINUM Hold Down Set up Blocks, Machinist Tools, Mill, Bridgeport
Unique"One of a kind" Rare"Hilts" brand Hold down block set here. Made from 100% Aluminum. Nestled in it's own Aluminum tray. The"HILTS" brand is Rare. I could not find anything on them, but they have a very cool logo. Please see pics as what you see is what you get. Standard size blocks 2 sets of the large. 3 of the medium, and 2 of the small. one set of small is another brand, Northwestern" also aluminum) Set has wear and tear as shown. However they stack nice and square. These are ready to use and save your machine table, or polish up like chrome, or both!
SMALL MACHINE MILLING CLAMP SET STUDS CLAMP ON INDEX TYPE STAND UNIMAT MILL
As found at an estate these are small clamps with a rack full of studs the screw underneath releases the top and you can turn and remove what you need without the rest of them falling out. Not sure what machines these are for but has to be a small one ruler in picture so you can get idea of size. Check out my!Be sure to add me to your!
LUFKIN AND NO NAME SMALL V BLOCKS MACHINIST SET UP TOOLING GRINDING MILL
DESCRIPTION: USED. V BLOCKS. THE LUFKIN MEASURE 1 5/8 X 1 1/4 X 1 1/4 HIGH AND THE NO NAME BLOCKS MEASURE 1 3/8 X 7/8 X 7/8. THE SMALL BLOCKS HAVE ENGRAVINGS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS ... moreAND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PO
Taiwan #1907 Steel Mill Minerals 1v Specimen O/P From Set NH
Taiwan#1907 Steel Mill Minerals 1v Specimen O/P From Set(Mint/ Never Hinged) MA residents must add sales tax. We are members of APS. ASDA and ATA for many decades, you can bid with confidence. T356)w90906) USA buyers pay $5.00 certified mail shipping. Everywhere else pays $14.00 registered shipping. On shipments of $70.00 or less, we have a SPECIAL SHIPPING OPTION: $2.00 shipping to USA and Canada addresses; $3.00 airmail shipping everywhere else. Plus $0.50(50 cents) for each additional item. All items ship together for one shipping fee. All items ship together for one shipping fee. ALL SHIPMENTS OVER $70.00 MUST BE SENT CERTIFIED TO US ADDRESSES AND REGISTERED TO ALL OTHERS. All shipments are covered by our private insurance. We have not increased our shipping costs after many postal rate increases. We now must charge $.50(50 cents) for ... moreeach additional item shipped together to cope with rising costs. All items will be shipped together for one shipping fee + 50 cents additional for each additional item shipped together. Powered by The free listing tool. List your items fast and easy and manage your active items.
11 pc. Laryngoscope blade handle set Mac Mill 00 0 1 2 3 4 Miller Rusch Welch
11 pc. Laryngoscope blade handle set Mac Mill 00 0 1 2 3 4 Miller Rusch Welch This listing is for 1 handle and 10 blades. Handle was tested with each blade and does turn on. The handle is Welch Allyn and the blades are different makes. Rusch. Mercury, etc. All blades and handles are used but in good working condition. BLADES Mac blades 1. 2, 3& 4 Miller blades 00. 0, 1, 2, 3, 4 Please message me with any questions. In accordance with ebay guidelines: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Deals and Bargains. 1504 McLin Drive, Plant City, ... moreFL 33565/ 813-434-0240. Payment is due within 2 days of the end of the listing. Please contact me if you should have any concerns with payment before the listing ends. We always try to work with people so if you anticipate a delay in payment please contact us through ebay. Please remember that communication is key. If we don't hear from you within 48 hours of the auction ending. We presume you don't have intentions on paying and a case WILL be opened against you with ebay. Furthermore, we do reserve the right to also leave negative feedback for you concerning the experience we have had with the transaction. So once again I will say that communication is key. Thank You. We ship out our items within 1 day of payment being made. Please understand that if you item ends on a weekend or holiday that may delay the shipment of your item. If you ever have any questions. Please contact us. We only ship items through Ebay's shipping system so you will always receive some type of tracking information and you will be notified when the item is shipped. Typically I do not ship internationally. If you are outside the contiguous United States please contact me first. If not I will can
Set of 3 Script Tokens from the Enterprise Mill in Augusta Georgia
This is a 3 token set 5 cents. 10 cents and 25 cents. They are from the Enterprise Mill in Augusta. GA. Description: They were used to pay the wages of the mill workers. And they could only be used in company stores. A great piece of history. James L. Colemam developed the Enterprise Mill in 1848. The ones in the picture are the exact ones you will recive. Be sure to add me to your favorites list! Shipping: I only charge what the shipping actually costs. I am not trying to get rich off of shipping charges! Payments: I only accept PayPal. All payments must be made within 72 hours(3Days) Unless otherwise stated or if you contact me and we come to an arrangement. Return Policy: I do have a 30 day return policy. If you don't like the item you receive. Just pay the return shipping and I will be glad to refund your money. THANKS. Check out ... moremy other items! Sign up for PayPal; the fast. Easy, and secure way to pay online. On Nov-14-13 at 03:14:15 PST. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back Powered by The free listing tool. List your items fast and easy and manage your active items.
weldon end mill sharpening fixture grinding parts, c4 collet set
c4 collet set. Incudes 1 each of.375,438 add 2 more sizes to your set and expand your tool
Dept 56 - Heritage Village Collection - Dickens Village Mill, Oliver Twist Set
Up for sale is a Department 56 Heritage Village Collection set. Included are the following: Dickens' Village Mill: It comes with the original slip cover. Styrofoam, info tag and power cord with light. The house appears to be in excellent condition, but please use the pictures to determine if it is up to the standards of your collection. The info tag has some wear on it. Please note that this piece appears to be the exact same as"Blythe Pond Mill House" But for whatever reason has a different slip cover with the differing title. The power cord with light still works(as you can see in the final picture) But please keep in mind that those bulbs are notoriously flaky and die all the time. If you turn it on and it doesn't come on, simply try unscrewing the bulb and then screwing it back in. If that doesn't work, just replace ... morethe bulb(we won't be held responsible for dead bulbs) Oliver Twist: This set comes with the original slip cover. Styrofoam and info tag. The set appears to be in excellent condition, but please use the pictures to determine if it is up to the standards of your collection. NOTE- WE SIMPLY DO NOT HAVE THE TIME TO EXAMINE EACH AND EVERY BIT OF THE PACKAGING: Most slip covers have some shelf wear to them. This can include wear around edges. Small tears, some light bends, writing and/or light stains. Most styrofoam will have some chips, maybe some smaller chunks missing and/or assorted smaller dents. If it's anything major, we'll mention it in the above description. Please see our other listings for more Heritage Village items! We are currently in the process of putting most of the collection up for sale here on eBay. So if there's a particular piece you're looking for just let us know!
3/4" Armstrong Machinist Strap CLAMP Tool Hold Down set up cnc Mill 8" Long USA
Item. Qty.1 per bid of a heavy duty Forged steel strap clamp Manufacturer. Armstrong made in the US America Dimensions. 1-3/16" thick x 8" Long Overall x 2-3/8" wide outside with a 3/4" wide slot for 1/2. 5/8 or 3/4" T bolts Condition. Nice used We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount ... morelisted above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! Pay me securely with any major credit card through PayPal! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
MACHINIST / TOOLMAKERS ALUMIUM MILL / BRIDGEPORT QUIL QUICK SET STOP #179 (NR)
MACHINIST/ TOOLMAKERS ALUMIUM MILL/ BRIDGEPORT QUIL QUICK SET STOP#179(NR) Description: PLEASE TAKE TIME TO LOOK AT MY OTHER AUCTIONS AS I HAVE OVER 400 TOOLMAKERS/ MACHINIST TOOLS LISTED THE NEXT TWO WEEKS ALL STARTING AT.99 CENTS WITH NO RESERVE! WILL COMBINE SHIPPING AT A CHEAPER RATE IF BUYING TWO OR MORE TOOLS THE SAME DAY! This item is in good used condition as seen in pictures below. In good working condition also. Shows normal wear from being used. Measures approx. 1 1/2" x 2 3/8" and 3/4" thick. Spring loaded to stay shut. Some of the tools have a name engraved on them and they are shown in the photos below. Also some of the tools have some light surface rust on them and a lot of them have oil on them to help prevent them from rusting. Anything serious will be in the detailed description. What you see in the photo's ... moreis what you get! If you have any questions. Feel free to ask. These are USED Toolmakers/ Machinist tools! NO RESERVE and thanks for bidding! Shipping: Shipping/Handling/Insurance will be SEE EBAY LISTING FOR PRICE in the U.S. Outside the U.S. will cost extra. If you are the winning bidder on 2 or more items on the same day. I will combine shipping at a cheaper rate. Any damage in shipping will be between the buyer and shipping company. Payment: Payment to be received within 4 days after closing of auction. If payment is not received within the 4 days the item will go back up for sale! PAYPAL ONLY! INDIANA BUYERS MUST ADD 7% SALES TAX TO THE TOTAL AMOUNT PAID! Thanks for bidding and please take time to look at the other items we have for sale. click to Enlarge click to Enlarge click to Enlarge click to Enlarge inkfrog terapeak. I000000. InkFrog Analytics.
Russia "Mill helicopters MI" pocket calendars set 2008.
Russia"Mill helicopters MI" pocket calendars set 2008. Set of 21 calendars. Payment PayPal. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-143c8dcfa32-0xef-
Atlas South bend Jacobs No 441-J9 lathe mill JT2 tap drive collet tool set Nice
Jacobs No 441-J9 tap driver collet set. Super shape. MT2 quill taper. Drives#10-1/2" Taps. Small collet MIA on both, 1/4"to 1/2" taps. As is. No returns. I will try and list any flaws. ANY Questions. Please ask! More pics! insurance. Tracking, anything, Please ask. Ships USPS. USA only! 4 days to pay or I relist. I am selling thousands of American tools& items. Thank you for looking and Good Luck!
Antique Sterling Silver Salt and Pepper Mill not matched set
Light wear to silver. Salt is weighted Sterling. Pepper has grinder so it is not sterling only marked italy. Sm dings. Some wear from use. Photos are the best description. L ots of pictures to show condition. Real Pictures. I never use stock photos) Shipping is based on 1 lb rate. Fed ex or Usps set the rate i just charge what it costs. We will guarantee satisfaction. Please ask questions and be sure of your purchase because return shipping is the buyers responsibility as per paypal guidelines. All eBay guidelines are followed and we expect the same from you. All questions about the buying process are answered carefully. 16 Years experience in selling online. Pictures are a main part of the item description. And should be carefully viewed as such. Arizantique is an eBay seller since 1998 so bid and buy with confidence.
CAT 50 5/8" End Mill (Missing Set Screw) (#1)
CAT 50 5/8" End Mill(Missing Set Screw) 1) Shank: CAT 50 Missing Set Screw Used- In Fair Condition(Has some rust. Wear and tear) Shipping Includes Handling and Postage to the 48 Contiguous States(Alaska and Hawaii Extra) TERMS& CONDITIONS(Please read. You agree to these terms upon purchase) Payments Payments are due at the end of the auction. Any unpaid items may be offered to the next highest bidder within 4 business days. Any balance not paid in full will result in an unpaid dispute being filed with eBay after 4 business days. Wire Transfers and Direct Deposits Wire transfers are the most preferred method of payment. Please call us at 626-444-0311 for instructions. Credit Cards Due to fees charged by credit card companies to process a merchant sale. We do NOT accept credit cards for eBay purchases EXCEPT for PayPal payments.You ... moremay pay with PayPal as you normally do however we will not accept direct credit card payments via phone, etc. Cashiers Checks We accept cashiers checks and company checks. There may be a 1-5 business day delay to verify funds on any non-certified check. Please contact us in advance if you have questions so we may accommodate the delivery schedule of your item accordingly. California State Sales Tax State Tax applies to all state residents and businesses unless you provide proof of a resale certificate to us. Please Fax to 626-443-9588. Warranty Sterling Machinery offers a 30-day MDNA sanctioned warranty unless otherwise stated in the description of the ad. Items that are described and advertised‘AS-IS’ are NOT covered by this warranty and the buyer releases Sterling Machinery from any liability or claims related to such. Frequently Asked Questions Q: Can Sterling Machinery Help with the logistics of Machinery shipping. And Loading? A: Yes. We can arrange for your machine to be loaded. Shipped via flatbed, or common carrier. We have relationships with machinery riggers, machinery movers, and trucking services, all over the world. Call today to see how much shipping will be for y
Starrett Punch Set Machinist Lathe Mill Milling
Up for auction today is a lightly used Starrett punch set in original wood case. There is two 3/32" A 1/8" 5/32" 3/16" 7/32" 1/4" and a 5/16" It comes with a flat anvil. It is lightly used. Some of the finish on the back side has been rubbed or sanded off. If you win multiple items, I will combine shipping, and send a revised invoice after auctions are over. If you think the shipping price is too high, please email me for a shipping quote. Ebay has really changed their system, and forces us to put in weights, and sometimes the shipping prices that show up on the page are too high. Thanks for looking* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-143e7bdf92f-0x105-
Calibration Set Cerec Compact Mill inLab
Up for bidding is a calibration set used for cerec milling machines! Included is everything in pictures! Good luck! Posted with
BT40 & BT50 Set Of 16 End Mill Taper Tool Holders with Cart
BT40& BT50 Set Of 16 End Mill Taper Tool Holders with Cart. You will receive all the items you see here.
Quick Change End Mill Holder Set - R-8 Bridgeport Mill
Quick Change End Mill Holder Set- R-8 Bridgeport Mill. Made by Diamond Tool& Die Inc. Oakland California. Quick Change Tool Holders- R-8 R8 Shank- 2 each, 3/8" dia holders- 2 each, 1/2" dia holders- 2 each, 5/8" dia holders- 2 each, 3/4" dia holders- 2 each, 1" dia holders- 1 each, 2JT taper for drill chucks- 2 each(I have not verified 2JT taper but am pretty sure that is the size)
2 VINTAGE 12" HIGH GAIL CRAFT TURNED WOOD SALT & PEPPER MILL SET~MADE IN JAPAN
A great looking pair of a vintage turned wood salt shaker and pepper mill. They measure 12" high and have great color. Excellent working condition. Made in Japan by Gail Craft. Another great estate sale find! Place your best bid early so you don't miss out at the end of the auction.and please make sure you check out my other items! Thank you for your interest and taking the time to look! PAYMENT ~ Payment is due within 4 days. Paypal or Cash on Pick-Up. SHIPPING ~ Delivery Confirmation is included on all purchases. I am happy to combine shipping charges if possible on items purchased within 3 days of each other. I ship on Tuesday. Wednesday and Thursday. If the difference in cost between parcel post and priority mail is not too much more, I may be able to upgrade your shipping method to priority. FEEDBACK ~ I take FEEDBACK seriously ... moreand strive for a 5 STAR RATING. If you encounter a problem with your item once it is received. Please contact me through Ebay Messaging before leaving Negative or Neutral Feedback. I will work with you. A Happy Customer is a REPEAT Customer. RETURNS ~ I have a 14 day return policy. Just send me an email and you pay return postage. WHAT I SELL ~ Primarily auction. Estate sale and flea market finds. They are all pre-owned and in good, excellent or mint condition. I try to describe each item as if I were the buyer. Occasionally I will list a vintage. Unused, new" item in the original packaging. I intend that the photos will be used as a large part of the description. I use recycled boxes. Bubble wrap and styrofoam peanuts. Please recycle and/or reuse these items if you can. Thank you for your interest and taking the time to look! Powered by The free listing tool. List your items fast and easy and manage your active items.
MACHINIST LATHE MILL Set Van Keuren Standard Gauge Space Block s 1" - 5" in Case
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1
Lot Set Collis kwik rapid switch end mill holders
Up for auction is a set of 6 different sized Collis rapid switch end mill holders. Sized.375.500.625.750.875 and 1in. All in good working order except the 1in holder witch has a missing ear.As shown in photo. Should be easily fixed I would think.
Help