Shank Tec Hss Morse Mts Hss Milling Slitting Drills Drillbits Hss Morse Mts 2 Mts 3 Shank Od Spiral Flutes 1 Mts 2 Machine Round Shank Reamer Straight Flutes Reamer Spiral Flutes Reduced Shank Od Die Button Hss Hand Tap 2 Split Die Button Screw Shank 16 Tpi Bsw 1 Bsp 1 Hss Morse Mts 4 Drill Parallel Die Nut Drill Drillbits Hand Tap Bsp Hss Machine Tap Unf Hand Tap Unc Flutes 7 Hand Tap Bsw Hss Milling Hss Morse Mts 3 Drill Drillbits Machine Shank Wt 1 4 Screw Hss-Co Chucking Tpi 14 3 Flutes Helical Flutes Shank Tap Tap Bsf Quality Hss Split Button Die Reduced Shank Od 1 2 Annular Cutter 1 4 Tpi Annular Magnetic Drill 1 2 Tpi Slitting Saw Hss Mts Morse 1 Drill Drillbits Morse Mts 3 Drill Drillbits 1 Parallel Reamer Spiral Flutes 1 Slotted Boring 16 X 1 1604 2 Flutes 4 Flutes 4 X 1 60 Degree Cutter 60 Degree End Mill 8 X 1 Acme Inserts Annular Cutter Set Apkt Ball End Mill Set Bench Grinder Wheel Boring Id Burr Burr Set Carbide Carbide Burr Carbide Drill Carbide End Mill Lot Carbide Insert Holder Ccmt 21.51 Center Drill Center Punch Chucking Reamer Cnmg Cnmg 432 Cnmg 643 Cohss End Milling Cohss End Milling Endmill 4 Flutes Coolant Corner Rounding End Mill Counterbore Set Countersink Countersink 82 Cut Off Wheels Cutoff Blade Cutter 3 Cutter Saw 2 Deburring Deburring Tool Diamond Grinding Wheel Drill Bit Emuge End Mill Lot End Mill Set Engraving Cutter Flutes 1 Fly Cutter Gleason Grinding Wheel Hand Reamer Hand Tap Horizontal Band Saw Horizontal Mill Cutters Hougen Hougen Cutters Hss Involute Gear Milling Cutter Hss Milling Slitting Slotted Cutter Indexable Indexable End Mill Iscar Dgn Iscar Drill Kennametal Keyseat Cutter Lathe Cutting Bits Lathe Threading Tool Lathe Tooling Lathe Tooling Lot Lngx Lot Micro 100 Milling Milling Cutter Milling Cutter Lot Mts 2 Drill Drillbits Niagara End Mill Od 1 Od 2 Od 3 Osg Parting Blade Parting Tool Radius Cutter Reamers Roloc Rotabroach Rotary File Roughing End Mill Sandvik Cnmg644 Scrap Carbide Sekr Shell Mill Slotted Boring Slotted Drill Solid Carbide Boring Bar Spot Drill Tap 1 Taper Inter Bottoming Tapping Taps Tcmt 21.51 Thread Mill Thread Shank Threading Tool Tool Tool Bits Tpg Tpg 222 Tpg 322 Vbgt Wcmx Woodruff Woodruff Cutter Wt 1 Z Carb Counter Bore Wnmg Hss Hand Parallel Reamer Spiral Flutes Ball End Mill Osborn Nachi Carbide Inserts Hss Morse Mts 4 Drill Drillbits Carbide Endmill Dovetail Cutter Lathe Cutter Die Handle
 In 
 
Categories
Order by: 
Available to: 
Price: 
 - 
This site contains affiliate links for which I may be compensated
Guhring 17.01mm-17.99mm, 3/4" Shank RT800WP 7XD Coolant Indexable Drill Bit
$
164.95
Buy It Now
Free Shipping
Condition: New
Location: Farmington, United States
Drilling Depth - 7xD. Manufacturer: Guhring. Guhring Item Number: 9052480179950. Shank Dia - 19.05. Coolant Through - Yes. Shank Length - 50.00. Shank ... more- HE. Body Dia - 16.70.
Rapidkut ME2335160 , A24U DCLNR4 Steel Shank Coolant Thru Indexable Boring Bar
$
260.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Chillicothe, United States
Type - A24U DCLNR4 Steel Shank Coolant Thru Indexable Boring Bar.
KENNAMETAL Carbide Coolant Drill 13mm 2FL 135° TiAlN B255A13000HPC
$
157.95
Buy It Now
$3.00 Shipping
Condition: New
Location: Saint Louis, United States
Finish: TiAlN. Drill Point Angle: 135. Drill Size: 13.00mm. Drill Size: 0.5118". Overall Length: 124mm.
CAT40 ER20 PRECISION CNC COLLET CHUCK 20000 RPM 5PC NEW
$
135.00
Buy It Now
Free Shipping
Condition: New
Location: Schaumburg, United States
5PC CAT40 ER20 Precision Collet Chuck. 5PC CAT40 ER20 Chuck. Gage or projection length of ER20 is 2.75". Fully ground flange and V-groove — easy on tool ... morechangers for less spindle and. Through spindle coolant capability from pull stud to collets.
10PCS HSK63 Coolant Tube Pipe with O-ring Swivel Nut Fit HSK63 Tool Holder
$
88.00
Buy It Now
Free Shipping
Condition: New
Location: China
Fit HSK63 tool holders. Well polished and no burrs.
Mitsubishi MVS1420X03S160 DP1020 14.20mm (.559”) Carbide Coolant Drill Bit
$
119.99
Buy It Now
Free Shipping
Condition: New
Location: Simpsonville, United States
Listing is for one brand new premium Mitsubishi WSTAR carbide coolant drill bit in original factory packaging. All drill specifications are listed in ... morephotos.
TSC Through Spindle Coolant Intake Filter as Compared to Haas® PN# 52-6004
$
60.00
Buy It Now
$24.75 Shipping
Condition: New
Location: Schaumburg, United States
This is the intake filter for the TSC pump on a Haas® Vertical Mill. It is mounted inside the coolant tank. As Compared to Haas® PN# 52-6004. All our ... moreparts have been tested for fit and are functional on Haas Machining Centers ®.
NEW-DIJET 8486 Coolant SCD-11-043-AMS Drill TiN Finish 4" OAL-SD-043-S-352V0562
$
39.99
Buy It Now
$5.47 Shipping
Condition: New
Location: Sterling Heights, United States
New in Tube, as shown.
3/8" Thread Flexible Water Oil Coolant Pipe Hose, Round Nozzle
$
6.25
Buy It Now
Free Shipping
Condition: New
Location: China
Plastic 3/8 BSP Male Thread Round Nozzle Flexible Water Oil Coolant Pipe Hose More More More More More Add my Store to your Favourites and receive my ... moreemail newsletters about new items and special promotions! General Interest Description Shipping& Payment Return Other Term& Attention Specification: Product Name, Flexible Coolant Pipe, Thread Dia, 16mm/ 3/8BSP, Round Nozzle Size, 20 x 35mm/ 0.8" x 1.4"D*L) Overall Size, 36 x 2cm/ 14" x 0.8"L*Max.W) Material, Plastic, Color, Blue. Orange, Net Weight, 46g, Package Content, 1 Pcs x Flexible Coolant Pipe, Description: With plastic flexible body. Light weight and easy to install with any direction and angle. Widely used for lathe. Milling, CNC machine, hydraulic machinery and water cooling system. Import duties. Taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Note that delivery times may vary. Particularly during peak periods or inclimate weather conditions. All items will be dispatched from our warehouse in China or Hong Kong directly. Due to Custom restrictions. We do not ship lighters to US We cannot ship on weekends and we do not offer Saturday. Sunday or holiday delivery. All our items will be shipped to buyer's PayPal address. Please confirm your address on PayPal before you bid We ONLY accept Paypal. We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended. Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt. If you would like to return your product(s) for repair/ replacement/ refund. Please kindly contact our customer service representatives via email for an authorized? RMA number. Your returned product(s) will not be processed without a completed RMA. Buyers are responsible for the returning sh
Walter Titex 2.95mm Carbide Drill Coolant Thru A6489AMP-2.95 (LOC575)
$
63.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
Coolant Through: Yes. Condition: New.
Shars CNC Lathe ER32 1-1/2" ER Collet Holder with Coolant Thru Straight Shank P}
$
77.95
Buy It Now
$11.80 Shipping
Condition: New
Location: Saint Charles, United States
COLLET CHUCK STYLEStandard. COLLET SERIESER32. COLLET NUT THICKNESS1.94"/50mm. Nickel plated ER collet nut will extending the tooling life. Precision ... moreground threads to ensure a tight fit when tightening the ER collet into the holder socket.
KENNAMETAL .452" X 2.375" LOC CARBIDE COOLANT DRLLL, RECONDITIONED
$
40.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Arlington, United States
CARBIDE COOLANT DRILL, 4.5" OAL GRADE KC7315
☀️Komet Kub V57 41590 Trigon ABS 50 .625" Dia. Indexable Drill Body Coolant Thru
$
116.79
Buy It Now
Free Shipping
Condition: New
Location: Katy, United States
Loc. 513Brand New in factory package exactly as pictured. Multiple units available.We ship out same day if paid by 2pm central. Sells and ships from Houston ... moreTX.Komet Kub TrigonIndexable Drill bodyCoolant Through.625" cut diameter1.563" length of cut1" shank dia.Right hand Fits w29 carbide insertsFits Komet ABS 50 modular holding system
NEW DIJET 15/16" CARBIDE TIPPED COOLANT DRILL DHD5-095-S2 - NEW IN BOX
$
119.95
Buy It Now
$18.10 Shipping
Condition: New
Location: Wilmette, United States
AMFLO 270A Mist Coolant Unit,12"Spout,4 ft Hoses 41AA50
$
218.50
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
Mist Coolant Unit,12"Spout,4 ft Hoses 41AA50. AMFLO 270A. 3M 2-36-5481 Film Tape,2 in x 36 yd,Gray,6.8 mil 15C961. administered by BIS, and the International ... moreTraffic in Arms Regulations administered by DDTC.
Guhring 4mm Solid Carbide Drill 6509 RT100T Coolant Through 15xD Deep Hole
$
134.96
Buy It Now
$6.80 Shipping
Condition: New
Location: East Jordan, United States
6509 - Deep Hole. Condition: New. OAL: 116mm.
NACHI 4.8mm Coolant Thru Carbide Drill. 5mm Shank. AQDEXZ0H3D0480. 0718955
$
79.95
Buy It Now
Free Shipping
Condition: New
Location: Chandler, United States
It features a 5mm shank and is made in Japan.
20×CAT40 45°0.740" Coolant Pull Stud Retention Knob for Mazak Fadal HURCO Okuma
$
36.50
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification： ANSI Standard Taper: CAT 40 C: 45° D1 Knob: 0.740" D2 Neck: 0.490" D3 Hole: 0.28" D4 Pilot: 0.636" L: 1.625" L1: 0.440" L2 Shou to End: ... more0.640" Knob Socket: RKW40 Condition:100% Brand New & High Quality Fitment For Hurco Mazak Okuma Fadal Package Including: 20x CAT 40 Pull Stud Brand findmall MPN 252928 Type Pull Stud UPC Does not apply Quantity 20 Custom Bundle No Bundle Description No Warranty 1 Year Warranty 1 Year.
YS-BPV-3000 Coolant Cooling Spray Pump CNC Lathe Mist Sprayer System 1000g 110V
$
106.41
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Solenoid valve open, on the ventilation spray; The solenoid valve is closed, and the gas is not sprayed. The gas pipe of the air pump intakes air from ... morethe air inlet marked IN the air filter. Air is released from the OUT outlet, and then connected to the solenoid valve with two copper mufflers on the end of the intake.
DME Tool SFGD8936ST 10.5mm Carbide Tipped Gun Drill Single Flute Coolant Fed
$
57.03
Buy It Now
$16.24 Shipping
Condition: New – Open box
Location: Middlebury, United States
MPN: SFGD8936ST. Will there be a dock or forklift. Size: Length: 13 in. Width: 2 in. Height: 2 in. Condition: New/Other. To get a freight quote we will ... moreneed to know the following Prefer to pick it up yourself?.
30cm Mist Coolant Lubrication Spray System w/ Magnetic Base & Fully Sealed Tube
$
22.33
Buy It Now
Free Shipping
Condition: New
Location: China
Do not use corrosive liquids. 1 Mist cooling lubricating spray system. Insert the fluid tube. Cooling pipe length: 300mm. Applicable liquid viscosity: ... more0-68cSt. Cleaning fluid must be used. Put the filter in the liquid.
1 Matched Pair Ultra Precision 1-2-3 Blocks 23 Holes .0002" Machinist 123 Jig
$
18.64
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description: Heat treated and case hardened to HRC 57-62 Made of precision-grade tool steel hardened and ground on all 6 sides of block Accuracy and squareness ... moreon all sides within 0.0002" 23 holes includes (5) 3/8-16 threaded holes for clamping and (18) untapped holes Cross drilling design allows for efficient use of lower weight with maximum strength Dimensions- 1" x 2" x 3", 2.1 lbs. weight 100% Satisfaction Guaranteed! Package Include: 1 Pairs 1-2-3 Blocks .
Turbocharger Coolant Return Line For BMW 1 2 3 4 5 7 Series F20 F30 11537643226
$
22.27
Buy It Now
Free Shipping
Condition: New
Location: China
Manufacturer Part Number: 11537643226. For 1' F20 LCI (09/2015 - 06/2019) 120i 125i B48. For 3' F30 LCI (09/2014 - 10/2018) 320i 320iX 330e 330i 330iX. ... moreThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
1/4" Coolant Oil Hose Pipe With Valve / Milling Lathe (L:400mm) [M_M_S]
$
13.02
Buy It Now
$5.99 Shipping
Condition: New
Location: China
This ebay listing include: 1/4" coolant hose with valve can be altered in length simply by snapping the segments apart. Used on lathe and milling. 400mm ... morelength Quantity: 1.
Kennametal Q(.3320) Coolant Thru Carbide Drill B225A08433HP KCPK15 (LOC1043B)
$
140.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
MPN: B225A08433HP KCPK15. Grade: KCPK15. Coolant Through: Yes. Condition: New.
Eldorado .2508 x 10" OAL Carbide Tipped Coolant Through Gun Drill
$
50.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Johnson City, United States
Coolant Through Tool. All Gun Drills are New, New Sharp or Excellent Condition. 7" Max Drill Depth.
Tungaloy DSXU3281F05 Carbide Thru Coolant Jobber Drill 21/64" GigaJetDrill
$
49.95
Buy It Now
$6.50 Shipping
Condition: New – Open box
Location: Saint Louis, United States
New carbide drill w/ thru coolant as shown. Note that the actual OAL of 4.89" is a little shorter than the advertised length (5"). 
KOMET 17/64" V90 CARBIDE COOLANT FEED DRILL, 5D X 3.650" OAL
$
29.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Mansfield, United States
6.75mm (.2656") carbide coolant feed drill
5PC BT40 ER16 PRECISION COLLET CHUCK 20000 RPM NEW TENTH ACCURACY
$
149.00
Buy It Now
Free Shipping
Condition: New
Location: Schaumburg, United States
5PC BT40 ER16 Chuck. 5PC BT 40 ER 16 Precision Collet Chuck. Accuracy in tenth. Accuracy in tenth, 0.0001". Fully ground flange and V-groove — easy on ... moretool changers for less spindle and. Through spindle coolant capability from pull stud to collets.
ZEREX ZXG051 Antifreeze Coolant,1 gal.,Concentrated PK 5
$
140.90
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
ZEREX ZXG051. Antifreeze Coolant,1 gal.,Concentrated PK 5. Governing Law; Limitations. Diversion contrary to U.S. law is prohibited. Country of Importation ... moreand Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
10Pcs CAT40 75° 0.747" Pull Stud Coolant Thru Retention Knob For Mori Doosan New
$
16.00
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Feature： Head Diameter：0.747" Head Angle ： 75° Drawbar Thread Size：5/8"-11 Machine Taper Size ：CAT40 Neck Diameter：0.549" Hole：0.281" Pilot：0.641" Overall ... moreLength：2.001" Shoulder To Head：0.787" Shoulder To End：1.024" Coolant Hole Description： Made from alloy steel 5155 with heat treat to RC 56-58 Each retention knob is individually magnetic particle tested to ensure free of crack High quality black oxide finish to ensure long enduring tool life.
10 pcs COOLANT THRU CAT40 Retention Knobs PS-532x45 for HASS-HAAS-new
$
46.00
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights, United States
DESCRIPTION: "CNC Tooling" Brands---The Best Quality on The Market---Sold Many Thousands to Distributors!*This set including: 10 PCS CAT40 CNC TOOLING ... moreRETENTION KNOBS PS-532X45 FITTING MACHINES OF HASS, KITAMURU, OKUMA, MILTRONICS BRANDS. Coolant Tru style5/8"-11 thread.Large Inventory! Same Day Shipping!Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
KENNAMETAL H715 19.05” SOLID CARBIDE COOLANT TWIST DRILL BIT Thread Is Removable
$
174.95
Buy It Now
Free Shipping
Condition: New
Location: Portland, United States
New unused… Boeing surplus coolant fed drill bit. As pictured. 3 flute… thread is easily removed by applying heat arbor size without thread 9/16” This ... morethread has never been removed. Picture is another bit.
CTMI 9mm Coolant Thru Carbide Drill 5XD 09.00x10.00x61x103IK ALCRN (LOC1768B)
$
59.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
MPN: 5XD 09.00x10.00x61x103IK ALCRN. Coating: ALCRN. Coolant Through: Yes. Condition: New.
CJT KoolCarb Size .3937 Coolant Feeding Solid Carbide Drill (NEW).
$
12.00
Buy It Now
$5.95 Shipping
Condition: New
Location: Lockport, United States
Walter Titex Micro Drill Bit 1/16″ Dia 140 ° Point Solid Carbide Coolant Through
$
105.79
Buy It Now
Free Shipping
Condition: New
Location: United States
Through Coolant, Series DB133-12-A1. Coolant Through Yes. AlCrN Coated, 2.638″ OAL, Right Hand Cut, Straight-Cylindrical Shank. Drill Point Angle 140. ... moreShank Type Straight-Cylindrical. New Walter-Titex Drill.
M14 X 1.5 6HX Solid Carbide Thru Coolant Tap GUHRING
$
79.95
Buy It Now
Free Shipping
Condition: Used
Location: Lebanon, United States
M22 x 1.5 mm Cobalt Thread Form Tap TiCN D6 Coolant Thru, bottom, ext length OSG
$
35.00
Buy It Now
$9.50 Shipping
Condition: New – Open box
Location: Ann Arbor, United States
Aftermarket Radiator Coolant Expansion Tank for Volvo EC210B EC240B EC290B L90E
$
79.15
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
Expansion Tank, WATER FITS VOLVO EC210B EC240B EC290B. For VOE11110410,11110410 VOE15047209 15047209 VOE17214676 17214676.
Coolant Through 1-1/8" HSS Drill Bit
$
90.00
Buy It Now
$17.25 Shipping
Condition: Used
Location: Richland, United States
45/64" dia x 8 1/2" long HSS Thru Coolant Drill Bit Made in the USA ALL ITEMS ARE SOLD AS IS. WHERE IS stock# 4621-C THERE IS A $15.00 HANDLING ... moreFEE INCLUDED IN ALL INTERNATIONAL SALES.
ER32 1/8"- 13/16" 12pc Inch Steel Sealed Coolant Collet Set
$
258.51
Buy It Now
$10.51 Shipping
Condition: New
Location: Solon, United States
Threading and Thread Repair. Hole Making & Finishing Tools. Milling & Special Form Tools. Hand Tools. Work Holding. Part #CSS177. Suncoast Precision Tools, ... moreInc. Deburring Shaviv.
Lubrication Spray System Cooling Sprayer Coolant Pump Oil Mist & 2 Sprayer 1000g
$
102.22
Buy It Now
$10.00 Shipping
Condition: New
Location: Chino, United States
Ys-bpv-3000 Cutting Cooling Spray Pump Precision High Gloss Machine Str-01 Spray. Solenoid valve open, on the ventilation spray; The solenoid valve is ... moreclosed, and the gas is not sprayed. The gas pipe of the air pump intakes air from the air inlet marked IN the air filter.
CLINE CARBIDE COOLANT THRU STEP DRILLS CT-50717 9/16 LOT OF 2 LOC11304
$
40.00
Buy It Now
Free Shipping
Condition: New
Location: Sidney, United States
COOLANT THRU. SIZE DIA.; 9/16 1.7LONG TILL 5/8 DIA.
STAR SU 20.00 MM COOLANT THRU CARBIDE REAMER
$
65.00
Buy It Now
$10.40 Shipping
Condition: New – Open box
Location: Elwood, United States
NEW STAR SU 20.00 MM COOLANT THRU CARBIDE REAMER, CUTTING LENGTH IS ROUGHLY 115 MM. LOOK CLOSE AT THE PICTURES. BUYER IS RESPONSIBLE FOR SHIPPING.
MOBIL VACTRA WAY OIL #2 for BRIDGEPORT, HAAS MILLS & HARDINGE LATHES 2 QUARTS
$
23.04
Buy It Now
$10.65 Shipping
Condition: New
Location: Eastlake, United States
Used in Bridgeport, Haas Mills and Hardinge Lathes. NEED PARTS FOR YOUR BRIDGEPORT?. Way Oil #2. We are a distributor for. ASK ABOUT PINT & GALLON CONTAINERS ... moreAS WELL!
Star SU LLC .1250 x 15" Single-Flute Internal Coolant Gundrill
$
12.50
Buy It Now
$15.55 Shipping
Condition: Seller refurbished
Location: Park City, United States
NEW BT30 ER32 2.36" COLLET CHUCK TOOL HOLDER CNC MACHINE TOOLS
$
19.99
Buy It Now
$8.00 Shipping
Condition: New
Location: Irvine, United States
BT30 ER32 2.36" COLLET CHUCK TOOL HOLDER. SHANK TYPE BT30 DRAWBAR THREAD M12 X 1.75 COLLET NUT ER32 UM. HOLDER TYPE ER COLLET CHUCK CLAMPING RANGE 3/32-5/8″ ... moreCLAMPING SIZE ER32.
ERICKSON CVKV40BEM125450 (CAT 40) 1.25 END MILL HOLDER
$
135.00
Buy It Now
$10.95 Shipping
Condition: New – Open box
Location: Sapulpa, United States
1.25 END MILL HOLDER. CAT 40 TAPER SHANK.
GUEHRING 6.2mm CARBIDE COOLANT TWIST DRILL BIT R-RT1 VA 08510 6.2 8mm SHANK
$
49.99
Buy It Now
Free Shipping
Condition: Used
Location: Dayton, United States
Manufacturer: GUEHRING. R-RT1 VA 08510 6.2. DRILL BIT. 1 1/4 LENGTH OF CUT. Condition: Used. LOCATION: WB8-4-3-9. SOLD BY M & J TOOLING LLC. ITEM TITLE.
1 pc. 7.3 mm EX-HO-GDR OSG HP COBALT COOLANT THRU DRILL W/TIN COATING(loc K16)
$
49.00
Buy It Now
Free Shipping
Condition: New
Location: Carrollton, United States
1 pc. 7.3 mm EX-HO-GDR OSG HP COBALT COOLANT THRU DRILL W/TIN COATING(loc K16).
2 PINTS OF MOBIL VELOCITE SPINDLE OIL #6 BRIDGEPORT MILL
$
16.74
Buy It Now
$10.65 Shipping
Condition: New
Location: Eastlake, United States
NEED PARTS FOR YOUR BRIDGEPORT?. PART # 002-0217.
1PCS COOLANT CAT40 1/4" X3.5" SHRINK FIT TOOL HOLDER BALANCE G2.5 25000RPM
$
129.99
Buy It Now
$8.00 Shipping
Condition: New
Location: Irvine, United States
BALANCE G2.5 25000rpm Gage Length 3.5″ COOLANT YES. Run out TIR :0.0001". Send Check to 192 technology dr. Site P Irvine CA92618.
4 Coolant Nozzles 1/8 NPT 2" 3" 4" 6" [not loc line] CNC Lathe Metal drilling
$
27.00
Buy It Now
$11.05 Shipping
Condition: New
Location: Exton, United States
Unlike a plastic Loc-Line nozzle, these nozzles are made with brass fittings and convoluted bronze tubing, so the unit holds its position and target better ... morethan a plastic Loc Line nozzle, and it won't leak because it has no joints to rotate or loosen.
4pcs Diamond Flat Lap Disc 6" x 1/2" Arbor 600-3000 Grit Abrasive Wheel Lapping
$
25.41
Buy It Now
Free Shipping
Condition: New
Location: United States
Diamond flat lap discs feature a diamond coating on one side and are precisely bonded to the disc's surface. This diamond coating provides high hardness ... moreand durability, ensuring efficient and long-lasting performance.Diamond flat lap wheel offers the flexibility of both wet and dry use. They can be used for dry grinding to provide convenience, or used with water or coolant to reduce heat for wet applications.The diamond grinding wheel is designed for sanding and polishing various materials such as ceramics, glass, stones, marble, crystal, agate, tungsten steel, carbide, metals, jewelry, jade, etc.The diamond grinding disc has a wide range of applications across different industries.
Sandvik CoroTurn XS CXS-A1000-06M 6mm Tool Holder 3.5” OAL 1” Shank Through Cool
$
50.00
Buy It Now
$4.43 Shipping
Condition: Used
Location: Clarksville, United States
Used holder in great condition. Please review all pictures for wear. Multiple for sale, holder may include a bit and cosmetic appearance may be slightly ... moredifferent. 6mm bore with through coolant. I’ve checked tool fit on each and all feel like new. Calculated shipping, I respond to offers usually very quickly. Thanks for looking!
Coolant Nozzle CNC Lathe Metalworking Grinding Drilling 2 inch [not loc line]
$
3.95
Buy It Now
$6.45 Shipping
Condition: New
Location: Exton, United States
Unlike a plastic Loc-Line nozzle, these nozzles are made with brass fittings and convoluted bronze tubing, so the unit holds its position and target better ... morethan a plastic Loc Line nozzle, and it won't leak because it has no joints to rotate or loosen.
NEW SURPLUS RTW (USA) SOLID CARBIDE COOLANT DRILL 28MM
$
100.00
Buy It Now
$8.00 Shipping
Condition: New – Open box
Location: Fairfield, United States
SIZE: 28MM. COOLANT THRU. CONDITION: NEW SURPLUS.
1 Gallon of High Quality Way Lube for Bridgeport Mill
$
24.16
Buy It Now
$17.39 Shipping
Condition: New
Location: Eastlake, United States
High Quality Way Lube for Bridgeport Mills and other Machinery Made in USA 1 Gallon of Way Lube Light viscosity oil for uniform film to reduce friction ... moreeven in extreme pressure applications. Anti-Wear formula meets or exceeds industry standards. Protects against rust. Corrosion, foaming and oxidation. Easy to apply in any manual or automatic system. Contains petroleum oil. Do not take internally. No significant adverse health effects are expected upon short term exposure to skin andeyes. Prolonged or repeated exposure may cause temporary mild irritation. If irritations develops or persists. See a physician. Read material safety data sheet before using. HQT PN: 002-0126 SPINDLE OIL IS AVAILABLE AS WELL! WE ALSO STOCK SYNTHETIC AND WATER SOLUBLE COOLANTS IN GALLON AN 5 GALLON BUCKETS! NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK 95%+ OF ALL BRIDGEPORT SERIES REPLACEMENT PARTS! JUST ASK We are a distributor for HIGH QUALITY TOOLS. Inc. and carry their complete line of replacement parts and accessories. Please e-mail us at for all of your Bridgeport and other knee-mill replacement parts needs. We also carry cutting tools. Work holding. Tool holders, measuring tools and much much more. Watch our store.new inventory being added regularly! Thank You for looking! We have all items that we sell in stock and try to ship from warehouse closest to you to guarantee fasted delivery times! Questions and e-mails are answered as soon as possible. Our schedule is Monday through Friday, 8:00am till 5:00pm EST Items are shipped as soon as we receive payment. And will be shipped out same day if payment is received before 3:00pm EST. We always try to improve our customer service to ensure that you. The customer, receive best service available! Payment We accept PayPal. And All Major Credit Cards as payment for items purchased at our auction. all payments must be received within 7 business days. Please email us for further information. Shipping and Handling Buyer is responsible for shipping charge. We NEVER charge for Handling. NO HI
Nachi (1057650) 15/16" 118° 10-3/4" OAL M35 5% Cobalt Coolant Fed Drill
$
289.95
Buy It Now
Free Shipping
Condition: New
Location: Farmington, United States
Nachi Item Number: 1057650. Model # 1057650. Manufacturer: Nachi. Tool Material M35 5% Cobalt. Drill Type Coolant Fed. Drill Point Angle 118°. Drill Grade ... moreHeavy Duty. Workpiece Material Range Steel, Stainless Steel, Non-Ferrous, Cast Iron, Plastics.
PCT 7/16" Solid Carbide Drill 12xD ZrCN Coating 135° Coolant Thru 2 Flute USA
$
200.99
Buy It Now
Free Shipping
Condition: New
Location: Farmington, United States
ZRCN COATING. 135 DEGREE. PRECISION CUTTING TOOLS.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
 In 

Former Listings  
 
160 165 HP OMC Inline Straight 6 GM 250 4.1 Coolant Hose
This auction is for everything you see in the picture. These are parts from a 165 HP OMC Inline Straight 6 GM. Casting numbers: Camshaft- 8891590. Crankshaft- 8876802, Flywheel- 3973455, Head- GM26 331184, Block- GM1 328576, Exhaust/Intake Manifold- 887839. This is a/an: Coolant Hose Well. I think that about covers it, but please feel free to email if you have any questions. Please check the shipping calculator for shipping charges. Good Luck Bidding. International Bidders Are Welcome! Please check the international shipping calculator for shipping charges. Stock No: 00F013 Powered by The free listing tool. List your items fast and easy and manage your active items.
Ingersoll Coolant System (Controls, Pump, & Filters)
Ingersoll built coolant pump with filter system· System. Complete with controls, mounted on stand with drip pan· 5 HP pump in reservoir· 300 PSI capacity· 2 Omni Filters(Filters returning coolant) Schematics available upon request. Approximate shipping weight 1800 lbs Tech Condition: This item was originally installed on an engine block line that had been cancelled. Item was mounted and powered up for demonstration purposes only. After demo. Line was decommissioned and the parts were salvaged. If you have any questions. Please contact us before bidding. Additional pictures and technical information can be supplied. Shipping and Handling A shipping calculator is provided at the bottom of the page. Simply enter your zip code and it will calculate total cost. For International shipping. Please contact us before purchasing. ... moreAll items will be shipped UPS if under 150 lbs. If alternative shipping is required. Please contact us before purchasing. Items over 150 lbs will be shipped using our freight supplier. Please contact us for pricing. Discounts available for multiple items. We will professionally package and insure this product for safe delivery. Local pickup is encouraged and all shipping and handling fees will be waved. Please allow 1 to 3 business days for processing and shipment. Return Policy All items can be returned if notified within 7 days of receiving. Simply send item back and your money will be refunded.
mutitoyo ip 65 coolant proof 293-344 micrometers
used but in great condition needs battery works great great shape
DELCO COOLANT PUMP 3G4154130
DELCO COOLANT PUMP 3G4154130 SN- A 78 YEAR 2002 1755 RPM 20 HP FRAME 286U#50827 Payment All payments must be received by Industrial Asset Recycling within 7 days. Shipping Buyer responsible for shipping. And costs related to shipping. FOR AN EXTRA FEE- PALLETIZE AND SHRINK WRAPPING CAN BE ADDED* About Us At Industrial Asset Recycling LLC we still believe in a personal relationship with our clients and attuning all our resources to their best advantage and needs. Regardless of your business we have an expert to fit your specialized need. Collectively. We have experience in all business areas of Asset Management, Recycling and Environmental Remediation to service your ever changing business needs. SEE OUR STORE FOR MORE GREAT DEALS Item sold"As Is"
Resharpened DIJET 17/32" TiN Carbide-Tipped 3xD Coolant Fed Drill SCD-13-053-AMS
DIJET 3xD Carbide-Tipped Coolant Fed Drill(SCD-13-053-AMS) Drill Diameter: 0.5312" Shank Diameter: 625" Flute Length: 1.85" Overall Length: 4.25" Direction: Right Hand Material: Carbide-Tipped HSS Coating: TiN This item appears to have been resharpened and is in good condition. Will ship out one day after receipt of payment.
GKI Allied 22000S-075L Short Spade Drill Holder 33/64" to 11/16" Coolant Fed
GKI Allied Coolant Fed Short Spade Drill Holder(22000S-075L) Drill Insert Range: 33/64" to 11/16" Shank Diameter: 3/4" Flute Length: 15/16" Overall Length: 3-1/2" Type: Straight Shank and Flute This item is in good condition and comes as shown. Will ship out one day after receipt of payment.
Allied 24005S-075L Spade Drill Holder 39/64" to 11/16" Coolant Fed
Allied Coolant Fed Spade Drill Holder(24005S-075L) Drill Insert Range: 39/64" to 11/16" Shank Diameter: 3/4" Max Drilling Depth: 2-1/2" Overall Length: 5-11/16" Type: Straight Shank and Flute Made in USA This item is in very good condition and comes with two new torx screws shown. Will ship out one day after receipt of payment.
KENNAMETAL COOLANT FED INDEXABLE SPADE DRILL w/ 3/4" SHANK + BLADE
aims KENNAMETAL COOLANT FED INDEXABLE SPADE DRILL w/ 3/4" SHANK + BLADE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Kennametal. This is a Coolant Fed Indexable Spade Drill with Extra Blade in good condition. Model# QPV0859RRSSF075. Features: Excellent cutting performance in wide range of boring size even at vibration cutting condition. Applied for various workpiece such as steel. Stainless steel, cast iron, etc. Assures longer tool life and excellent surface finish. Specifications: Cutting Diameter: 0.703" 0.859" Shank: 3/4" Flute Length: 5" Overall Length: 8-1/4" Clamping System: Screw On. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large ... moreselection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNAMETAL COOLANT FED INDEXABLE SPADE DRILL w/ 3/4" SHANK + BLADE KENNAMETAL COOLANT FED INDEXABLE SPADE DRILL w/ 3/4" SHANK + BLADE KENNAMETAL COOLANT FED INDEXABLE SPADE DRILL w/ 3/4" SHANK + BLADE Reliable Tool Inc. c 2011 | Powered by
COOLANT FED INDEXABLE SPADE DRILL w/ 1" SHANK + BLADES
aims COOLANT FED INDEXABLE SPADE DRILL w/ 1" SHANK + BLADES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Coolant Fed Indexable Spade Drill with Extra Blades in good condition. Features: Excellent cutting performance in wide range of boring size even at vibration cutting condition. Applied for various workpiece such as steel. Stainless steel, cast iron, etc. Assures longer tool life and excellent surface finish. Specifications: Current Cutting Diameter: 1-1/4" Shank: 1" Flute Length: 3" Blade Sizes: 1-1/4" 1-1/2" Overall Length: 7" Clamping System: Screw On. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check ... moreout our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. COOLANT FED INDEXABLE SPADE DRILL w/ 1" SHANK + BLADES Reliable Tool Inc. c 2011 | Powered by
8 CARBIDE TIPPED COOLANT FED GUN DRILLS - 3/8" to 29/64"
aims 8 CARBIDE TIPPED COOLANT FED GUN DRILLS- 3/8" to 29/64" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 8 used Carbide Tipped Coolant Fed Gun Drills in good condition. Specifications: Drill Sizes Range: 3/8" to 29/64" Shank Sizes Range: 1"OD- 7/16"ID Lengths of Cut Range: 1" Overall Lengths: 6" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 8 CARBIDE TIPPED COOLANT FED GUN DRILLS- 3/8" to 29/64" Reliable Tool Inc. c 2011 | Powered by
KOOLMIST Kool Mist CoolMist Cutting Fluid Coolant Mist Spray Unit
For sale is a used KoolMist Model 100N- pnuematic. Shop air powered mistspray coolant generator& stainless steel tank. Stainless tank is 8-1/4"L x 3-11/16"W x 7-3/4" H. Total Height is 10" H to top of regulator screw. I haven't measured the tank quantity but I would guess it is roughly 1 gal. This KoolMist is used for spraying cutting fluid coolant on metal cutting tools such as Lathe, Bridgeport, Vertical Mill, Drill Press, etc. Because it uses a pnuematic style jet pump there are no moving parts or electrical pumps to fail or short circuit. Posted with
Fadal CAT 40 x 45 Deg. non-coolant Pull Stud
Fadal CAT 40 x 45 Deg. non-coolant Pull Stud Shipping Info | Payment Methods& Information Express Checkout! If you are the winner. Click the button above to check out right now! Shipping Calculator Weight Origin Zip Code 1.00 Pounds 06111 Payment Methods Credit Cards Phone: 1-888-474-1300 PayPal Description 1 PC. Fadal CAT 40 x 45 Degree non-coolant Pull Stud/Retention Knob. For Model Number- VMC-40, VMC-4020, VMC-15, VMC15XT, VMC6030, 7001PM Technical Details: Part No. Description Angle d1 d2 d3 L l1 l2 T 21003-C, CAT 40-ANSI-C, 45 Deg. 740" 490" 490" 1.50" 640" 440" 5/8-11" Our Pull Studs are manufactured with the best steel available to ensure minimum wear. They feature a tough inner core that is made to withstand the stresses of modern machining porcesses. For safe operation please make sure that ... morethe pull stud you order is the exact pull stud for your machine. Imporoper choice of pull stud can cause damange to the spindle and/or toolholder. And is a potential safety hazard. Don't forget to check my other items on my eBay Stores. Buy from me& save 1000nds of Dollars on any large purchase! Shipping Info to Calculate Shipping All orders upto 150 lbs. can be shipped via Fedex(Fedex Express/Corporation) UPS(United Parcel Service Inc. or USPS(United States Postal Service) You can check or calculate the shipping charge here: Source Zip Code 06111) Orders above 150 lbs. must be shipped via a freight carrier. Check out: All estimates are subject to additional charges depending on the area in which you are located. The carriers will assess an extra charge if delivery location is in a residential area and/or the services of a lift gate are required. Hemly Tool Supply of CT encourages buyers who wish to use their own FedEx and UPS account. Just e-mail us at or include account# with the payment. Handling Fees will apply to all UPS. FedEx& USPS shipments. Domestic: $2.00 Canada& Mexico: $3.00 International: $4.75 Delicate(eg. Digital Indicator or Caliper) Expensive(Pre
Valenite PT-274 Retention Knobs coolant thru pull studs
Here is a couple Valenite PT-274 Thru Coolant Retention KNobs or pull studs. Cleaning out the shop.This was in a box of stuff I bought a long time ago and I have no use for it. Not a cheap China knock off. Looks good. Check out my store for other industrial surplus including machinery books. CNC Controls and manuals.
USED WALTER 1.937" carbide INSERT COOLANT DRILL B4214.UF38.492.Z1-197R-7
LISTING IS FOR A USED WALTER INERT DRILL BRAND- WALTER PART# B4214.UF38.492.Z1-197R-7 DIAMETER- 1.937" FLUTE LENGTH- 7.75" OAL- 11.82" SHANK- 1.50" USES INSERTS- P484.P-7R(NOT INCLUDED) CONDITION- VERY GOOD USED DRILL HAS BEEN REBUILT LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST ... moreBE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOU
1-7/8 MADISON 1230-505-04780 COOLANT SPADE DRILL HOLDER USA
1-7/8 MADISON 1230-505-04780 COOLANT SPADE DRILL HOLDER USA. MADISON 1230-505-04780 COOLANT FED SPADE DRILL HOLDER 1-7/8" This listing is for 1 used drill holder in good general condition with some minor surface wear and light surface rust. As seen. Made in the USA by Madison with part number 1230-505-04780. For use with removable cutting inserts. Measures 1-7/8" diameter. Shank is 1-3/4" diameter and 1-11/16" width at flat area. Shank has a 5/8" opening. There is also a 1/2" threaded opening on the side with a hex screw installed. Measures approx 14-3/16" overall length with 10-1/8" flute length. Don't miss your chance to own this tool now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank ... moreyou. You can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple items are purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes, though we usually mention the maximum quantity in this paragraph. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is 12-1/4" x 12-1/4" x 5-1/2" Total weight must not exceed 20lbs for International Medium and Large Flat Rate Boxes, and must not exceed 4l
Allis Chalmers WD WD45 Tractor Block Coolant Drain Plugs
Allis Chalmers WD WD45 Tractor Block Coolant Drain Plugs. Please check out all of our auctions. All items are sold as is as pictured we do our best to sell only good usable items. Buyers are welcome too come pickup any items from us too save shipping costs. We will combine shipping if items ship well together in a box. Please ask questions if you have them. WI buyers add 5.5% tax
coolant tank with mosnic
This is a conveyor for the makino a61nx. It includes all pumps unit is slightly used and works 100% or u could just use for replacement parts as well as maintenance conveyor. If any questions feel free to email us. THANK YOU
Komet Indexable Coolant Through .625/1.250R Drill KUB V1211590
Komet Indexable Coolant Through Drill. 625 Diameter/ 1.25 Radius. Has a 2" flute length. USA Made. Comes with screws. Drill has minimal wear and has barely been used. Is in great shape and runs true. See pictures for more detail.
50MM SANDVIK INDEXABLE INSERT COOLANT DRILL W/ CAPTO C6 ADAPTER
SANDVIK COROMANT INDEXABLE DRILL 50MM(1.97" DIAMETER. C6 CAPTO ADAPTER. ADAPTER PART NO. C6-391.27-40 085 Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $11.50 USPS Priority Mail shipping with tracking. We gladly combine shipping on multiple items purchased! Thanks for looking!
LATHE MILLING MACHINE lubricating COOLANT pump and tank
MILLING MACHINE.AND LATHE coolant pump, with tank, adjustable wand, the tank has a lip on the back to fit any chip tray, excellent condition, I will set shipping at 25.00 if its less I will return the difference in shipping Thank You
12" indexable coolant drill with 6"fl 2"dia. 17 wcmx080412r-51 inserts
12" indexable coolant drill with 6"fl 2"dia. 17 wcmx080412r-51 inserts
Sumitomo KDS 205 MAV 20.5mm Coolant Through Carbide Tipped Drillbit
Sumitomo KDS 205 MAV 20.5mm Coolant Through Carbide Tipped Drillbit. Carbide tip 0.55" long two flutes with coolant channels length 6.2" shank: diameter 1" 2.15" long with 1.63" long flat Used and good but would need to be resharpened. No significant defects. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Tecnana CAT 50 Coolant Inducer Z-680-24
You are bidding on a Tecnana CAT 50 Coolant Inducer Specifications Good Condition More Available Good Condition: Item is free of any significant dents. Marks, imperfections that would impair the functioning of the item(unless specified in the description) Good Usable Condition: Item may have dents. Marks, imperfections that do not impair the functioning of the item(unless specified in the description) Machines/Tools that cost above $500.00 please pay with credit card or wire transfer. We guarantee that the item purchased is packaged exceptionally well. Once it is picked up by a common carrier(UPS etc) we lose control over how the item is handled. If you receive an item and it(or the box) appears damaged. Do not sign or accept. If the item is left at your home or business, and you later find that it is damaged, take pictures and notify the ... morecarrier. inkfrogproseries. The machine/item is located in Bay Shore. NY 11706 Shipping costs to buyer location are not included with the machine price We can provide a freight quotation, buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required, we quote crating or palletizing seperately and it is not included with the sale price. We'll quote per customer requirements, customer shipping method& machine design. Shipping can be confusing. Relatively inexpensive, but heavy items, can cost more to ship than the item itself. Our experience is to allow 1-2 weeks for freight delivery. Please contact us at info@sagmachinery.com or give us a call at: 1-631-586-1768 OR 1-800-334-0175 if you have any questions about shipping.Upon arrival of your machine, unpack and immediately check for visible damage. Call Sag immediately– you will need to take pictures and email to info@sagmachinery.com. Make sure you note on BOL BEFORE the driver leaves. We accept paypal(info@sagmachinery.com)Or just give us a call at 1-800-334-0175 or 1-631-586-1768 with your credit card number. Sp
Kennametal CAT-50 Coolant Inducer Z-679-20
You are bidding on a Kennametal CAT-50 Coolant Inducer Specifications USESTG/PG-100 Collets Very Nice Condition More Available Good Condition: Item is free of any significant dents. Marks, imperfections that would impair the functioning of the item(unless specified in the description) Good Usable Condition: Item may have dents. Marks, imperfections that do not impair the functioning of the item(unless specified in the description) Machines/Tools that cost above $500.00 please pay with credit card or wire transfer. We guarantee that the item purchased is packaged exceptionally well. Once it is picked up by a common carrier(UPS etc) we lose control over how the item is handled. If you receive an item and it(or the box) appears damaged. Do not sign or accept. If the item is left at your home or business, and you later find that it is damaged, ... moretake pictures and notify the carrier. inkfrogproseries. The machine/item is located in Bay Shore. NY 11706 Shipping costs to buyer location are not included with the machine price We can provide a freight quotation, buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required, we quote crating or palletizing seperately and it is not included with the sale price. We'll quote per customer requirements, customer shipping method& machine design. Shipping can be confusing. Relatively inexpensive, but heavy items, can cost more to ship than the item itself. Our experience is to allow 1-2 weeks for freight delivery. Please contact us at info@sagmachinery.com or give us a call at: 1-631-586-1768 OR 1-800-334-0175 if you have any questions about shipping.Upon arrival of your machine, unpack and immediately check for visible damage. Call Sag immediately– you will need to take pictures and email to info@sagmachinery.com. Make sure you note on BOL BEFORE the driver leaves. We accept paypal(info@sagmachinery.com)Or just give us a call at 1-800-334-0175 or 1-631-586-1768 wi
471 TO 472 TIP X 3 1/8 TO 3 3/8 LENGTH SOLID CARBIDE DRILL COOLANT HOLES REGRIND
CARBIDE COOLANT DRILL Here is a KENNAMETAL.471 TO.472 TIP X 3 1/8" TO 3 3/8" LENGTH SOLID CARBIDE DRILL WITH 2 OIL COOLANT THRU HOLES. The shank has a.472 OD. The drill has a usable flute length of about 1" I believe is has been reground from a longer length. The drill is about 3 1/8" TO 3 3/8" in length but could vary up to 3 1/2" It does not look like it was used after being ground. Some of the photos below might be stock photos. Item Photos, Please check my other auctions if you are interested in unusual items or books because I am continually adding new items. I will gladly combine shipping. Be sure to add me to your favorites list! Summary of My Selling Policies Payment 1) We accept payment by Paypal 2) Payment is due within 10 days of the end of auction. If payment is not received non-paying bidder alert ... morewill be issued. Shipping 1) We ship in the US only due to the new policies. The shipping. Handling and insurance fees are fixed and stated in the auction 2) Shipping on this item is calculated at the FIRST CLASS MAIL rate. 3) Shipping discounts offered for multiple purchases shipped to the same address. 4) Insurance is always available. Please email me for cost. Delivery 1) Items are usually shipped as soon as payment is received. 2) We ship Monday thru Saturday. Refunds& Returns 1) ALL of our auctions are Guaranteed. In the unlikely event we mistakenly misrepresented an item. We offer a Full Refund of the Bid Price. Just email us within FOUR days of delivery. Bidders are still responsible for ALL shipping, handling and insurance costs, including ALL return shipping costs. 2) Please understand that all information pertaining to age. Condition, origin, etc. are approximations. Unless specified, all items are used, second-hand, or antique. We do not sell on approval. If you are unsure of any information provided or require additional information, please email us Prior to Bidding. 3) Please inform us before returning an item. Item will not be accepted without prior notificatio
VALENITE VAL U DEX VCDD 225 200 1238 DRILL WITH COOLANT THROUGH GREAT SHAPE
Up for auction is a coolant through drill made by Valenite. This cutter looks like it may have never been used. But I am listing it as used because I have no history from when I purchased it. It was in a lot of tools that I had purchased. It is in very good condition. It does have some rust. The insert pocket looks great. I have no idea what type of insert this takes. Shank diameter is 2” Drill body diameter is about 1.96” Flute length is about 4.5” Overall length is about 10-7/8” Weight of this drill is a little over 8 lbs. The drill body has the following etched on it: Valenite 1T9 VCDD 225 200 1238 VAL U DEX This item would be shipped via USPS priority mail. If you should have any questions at all about this item.Please do not hesitate to ask. I try to describe my items to the best of my abilities. Payment is due within 10 days of auctions ... moreend. I will ship within(3) business days after receipt of payment. Thanks for looking. Returns are accepted.However,buyer is responsible for return shipping cost.
Kool Mist Portamist #560 Portable / Tankless Mist Coolant Kit -12" Loc-Line Hose
Kool Mist Portamist Mist Coolant System Kit#560 Free Ship ping USPS Priority Mail(FRA) The PORTaMIST Kit Model 560 Includes: One PORTaMIST Model 60M unit including air and coolant hoses, heavy duty magnetic base. Simple single knob control, and 12" flexible LOC-LINE® positioner One four-ounce sample of Formula 77 concentrated coolant One 1 Gallon Jug of Forumula 78 Mist Spray coolant Location: AL2)
USED WALTER carbide INSERT COOLANT DRILL 1.250" B3213.U5F.0318.Z01.095R (1-1/4")
LISTING IS FOR A USED WALTER INSERT DRILL BRAND- WALTER PART# B3213.U5F.0318.Z01.095R DIAMETER- 1.250" FLUTE LENGTH- 3.750" OAL- 8.880" SHANK- 1.250" USES INSERTS- P284. 4(NOT INCLUDED) CONDITION- GOOD USED SOME MINOR SURFACE RUST Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN ... more7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF
AMEC COOLANT THRU DRILL BIT-# 3 MORSE TAPER WITH 5/8 DIA. INSERT
THIS DRILL BIT IS 7 1/4 INCHES LONG. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f125bb57b-0xff-
Mr. COOL TOOL CUTTING & TAPPING FLUID COOLANT OIL
I am selling Industrial Engineer tools and supplies: These 4 oz. can and bottle are full. See photos for clarity. I do combine all shipping bought within 24 hrs. Shipping based on weight and size.
2008 Haas VF2SS Vertical Machining Center CNC Thru Spindle Coolant Low Hours
2008 Haas VF-2SS YEAR: 2008 TABLE SIZE: 36" X 14" MAX. TABLE LOAD(EVENLY DISTRIB. 1500 LBS SPINDLE NOSE TO TABLE TOP: 4" 24" X-AXIS: 30" Y-AXIS: 16" Z-AXIS: 20" RAPID TRAVERSE RATE ALL AXES: 1400 IMP CUTTING FEED RATE ALL AXES: 0.1-833 IPM SPINDLE SPEEDS: 0-12.000 RPM SPINDLE TAPER: CAT 40 SPINDLE MOTOR: 30 HP TOOL CHANGER CAPACITY: 24+1 STATIONS MAX TOOL WEIGHT: 12 LBS MACHINE DIMENSIONS: 88" X 93" X 106" APPROX. WEIGHT: 9000 LBS. EQUIPPED WITH: HAAS CNC CONTROL INLINE DIRECT DRIVE SPINDLE HIGH SPEED TOOL CHANGER TSC THROUGH-SPINDLE COOLANT(300psi) ETHERNET/ HARD DRIVE 4th AXIS DRIVE ENHANCED REMOTE JOG HANDLE HIGH SPEED MACHINING COORD. ROTATION& SCALING ETHERNET HARD DRIVE CHIP AUGER HIGH INTENSITY LIGHTING SPINDLE ORIENTATION PROGRAMMABLE COOLANT POWER FAILURE DETECTION MODULE Spindle ... morehours- 2.100 Price: $69.900.00 FOB- Located: CA For More Information or To Inspect Please Call Maury Cohn 1 800 888 4312
Mitutoyo 0-1" Ip65 Digimatic Digital Micrometer Coolant Proof 293-348 Mics
For auction is a Mitutoyo 0-1" Ip65 Digimatic Digital Micrometer Coolant Proof 293-348. They are in good condition. Free shipping. View my other auctions. Thanks and good luck. Posted with
FOG BUSTER NO. 5390 SPRAY COOLANT UNIT W/ MAGNETIC BASE, RESEVOIR & REGULATOR
aims FOG BUSTER NO. 5390 SPRAY COOLANT UNIT W/ MAGNETIC BASE. RESEVOIR& REGULATOR read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Fog Buster& Hench Mfg. Inc. in U.S.A. This is a Mist Coolant Unit in good condition. Features: Cools the work and prolongs tool life. Sets up quickly. Comes with Regulator& Resevoir. Powerful magnetic base. Specifications: Inlet: 1/4" NPT male OAL of Resevoir: 13" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. FOG BUSTER NO. 5390 SPRAY COOLANT UNIT W/ MAGNETIC BASE. ... moreRESEVOIR& REGULATOR FOG BUSTER NO. 5390 SPRAY COOLANT UNIT W/ MAGNETIC BASE. RESEVOIR& REGULATOR FOG BUSTER NO. 5390 SPRAY COOLANT UNIT W/ MAGNETIC BASE. RESEVOIR& REGULATOR Reliable Tool Inc. c 2011 | Powered by
4" x 36" Kalamazoo type Metal Fabrication Sander w/ Coolant/Free Shipping `1ph
Kalamazoo Type Duomet Belt Sander Surfacer with Coolant Pump Knife. Metal, and Rock Belt Sander Free Shipping in the Unites States 48 States Only The item comes with phase converter. This is 220 Single Phase. Business to Business Only! No Residential Delivery Free Shipping with Full Price Offer Only! Drawer with extra Norton Belts 4" x 38" Belts, Motor: Volts 220 Cycle 60 Cat# 16-1272, Amps 4.1 Phase 3 Serial# 224-DMF-463, Buehler LTD, Apparatus for Metallurgy/ Geology, Pump 220 Cycle 60, Amp.9 Ph1, This was purchased from Miami University in Oxford. Ohio. This was used to make custom knife blades and handles. With the coolant pump, shaping and sharpening blades is a necessity. Footprint: 25" x 26" x 46" The unit is 220 3 phase. A 1 hp static phase convertor can be purchased to be used at home shops. This item is ... moremade in the USA! If you are a hobbyist. Knife maker, Tool Maker, Geologist, Metallurgist and etc. This can be picked up and tested at my shop. The item is in good to excellent condition. Please email for any questions. THIS MACHINE CAN BE SINGLE PHASE 220 Volts w/ Static phase convertor. All static convertors are an extra $150.00 1-5hp. Please email for price. Please email for any questions! This item is used and can be inspected by potential buyers. Delivery: I will deliver this item free for the first 15 miles around my address. After this. I will deliver this item up to 200 miles in the United States at $2.75 a mile after the first 15 miles. I will deliver this item as long as you have a way to unload! The delivery charge has to be paid upfront and there is no refund on this portion of the transaction! If forklift service is need, I can provide this service for an additional cost. Shipping information: Shipping is free from Business to Business. If you are a Residence. This will be shipped to a terminal. When palatalized or crated. The dimensions will be 40"wide x 40" x 48" tall, freight class 85 gross weight 346lbs. My zip code for shipping is 45431. Please ema
10 CARBIDE TIPPED COOLANT FED GUN DRILLS - 3/8" to 27/64"
aims 10 CARBIDE TIPPED COOLANT FED GUN DRILLS- 3/8" to 27/64" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 10 used Carbide Tipped Coolant Fed Gun Drills in good condition. Specifications: Drill Sizes Range: 3/8" to 27/64" Shank Sizes Range: 1"OD- 7/16"ID Lengths of Cut Range: 1" Overall Lengths: 6" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 10 CARBIDE TIPPED COOLANT FED GUN DRILLS- 3/8" to 27/64" Reliable Tool Inc. c 2011 | Powered by
Graymills Coolant Pump 1/4 HP
FM Series pumps are compact. Yet offer the performance and dependability of larger pumps. Graymills' volute design enables FM Series pumps to pump down to an extremely low level. Discharge is above the integral mounting flange. These pumps will drop through a 4-1/2" hole supported by their integral mounting flange. Discharge is above the mounting flange. Discharge diameter and maximum viscosity for each pump are listed below. Pump performance and available motor voltages are shown below. Length from flange to intake is 12.5" Speed: 3450 RPM Discharge: 1/2" NPT horizontal Maximum Viscosity: 500 SSU 230/460 V. 50/60 Hz, 3 Phase This unit is in great condition. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f13b8ce98-0x104-
MITUTOYO 500 - 683 CD-8" PM COOLANT PROOF DIGITAL CALIPER IP66 8" NO RESERVE!!!!
MITUTOYO DIGITAL CALIPER TOOL MODEL# CD-8" PM/ 500- 683 ABSOLUTE COOLANT PROOF/ IP66 This is a USED di git al caliper in good condition. There are multiple small scratches on the metal gauge& plastic housing. The numbers"12-023" are etched on the back(see pics) None of the aforementioned affects usage. This tool has been tested an d is functional. As with any used precision tool. This unit will need to be re-calibrated. Great for metal manufacturer/ fabricator. Please see pictures NO RESERVE Item comes as pictured Visit our eBay Shipping Policies Domestic All items are shipped via USPS/UPS. We do not ship outside the U.S. Return Policy Returns are accepted. Full amount refunded. All returns must be postmarked within 14 business days of receiving your item(s) Items must be returned in exact condition as was sent. Buyer must ... morepay for return shipping. Customer Pick-up Policy Any item purchased on eBay may be picked up for free at the following location: 1311 S Dixie Hwy#17E Pompano Beach. FL, 33060 All pick-ups must be between the hours of 9am to 5pm Monday Through Saturday. Customer Service Available by Phone: Monday-Saturday 9:00 am- 5:00 pm(EST) 954) 783-2500 Florida State Sales Tax All items shipped to Florida addresses must pay 6% Florida State sales tax. REF#700400859(4)JH@ Store# 1
NICE!! KOOL MIST 1gal SPRAY COOLANT GENERATOR
aims NICE! KOOL MIST 1gal SPRAY COOLANT GENERATOR read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Kool Mist. This is a Kool Mist Spray Coolant Generator in GREAT condition. Specifications: Tank Capacity: 1 gal. Overall Dimensions: 9" x 4-1/2" x 10-1/2" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! KOOL MIST 1gal SPRAY COOLANT GENERATOR NICE! KOOL MIST 1gal SPRAY COOLANT GENERATOR Reliable Tool Inc. c 2011 | Powered by
Model TTIR 25.4-5C Boring Bar by Iscar 1" shank with coolant passthru
GREAT DEAL! This auction is for a Model TTIR 25.4-5C Boring Bar by Iscar 1" shank with coolant passthru. Retail price $350. This holder is used. But is like NEW, in excellent condition. I have been it the machining/ tool& die business for over 30 years. Do to unforseen issues I am selling off all my tooling that I have accumulated over the past 30 years. Ask about many other tooling items- solid carbide boring bars, end mills, drills, taps, reamers, tool holders, scales, number& letter stamp sets, ect. If you win more than 1 item, please wait untill we send you an invoice with combined s&h costs. We ship via usps/ Pay Pal shipping. You will receive a notice from Pay Pal when your item ships& you will also receive a tracking number for you item Buyer pays $10.00 s&h anywhere in the USA(50 states)this includes insurance& ... moredelivery confirmation on all items)No APO mailing addresses on this item) We ship to USA mailing addresses only. We gladly combine s&h costs on multiple auction won in the same day. 1st item s&h is full price. Each additional item s&h is 1/2 price. We do not do pick-up or delivery on any local sales. PAYMENT: We gladly accept payment by Pay Pal. Please email us about other payment options. SHIPPING: We ship to USA mailing addresses only. No APO mailing addresses on this item) I will always make an effort to ship the day after your payment is received. I ship all of my items via USPS with delivery confirmation. I combine shipping on multiple items won in the same auction day. RETURN POLICY: We have a money back guarantee. If you are unhappy with any item you received in our auction. Return it(in the same condition it was received in) and we will refund your payment.
CAT 50 TOOL HOLDER COOLANT INDUCER TECNARA
Takes 1.500 shank tool. Cat 50 coolant inducer. Ninety(90) degree retention knob included. Price is per piece; 2 available.
MITUTOYO DIGITAL MICROMETER 1-2 INCH, MODEL 293-345, IP65 COOLANT PROOF
Excellent condition. No scratches. No dings, no engravings. No selling outside US.
CPS DIGITAL COMPUTE-A-CHARGE, CC-100, PRO COOLANT SCALE,NICE WORKING UNIT
This is a CPS CC 100 compute a charge coolant scale.Works great and looks good too, you will need a 9 volt battery as I cannot legally ship it with it,please see the pics as I took many so you can see the condition for yourself,Thanks for looking and GOD Bless America and our Troops.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f1a2035d5-0x105-
1.109" KOMET ABS 50 KUB INDEXABLE COOLANT FED DRILL V30 72820
1.109" KOMET KUB INDEXABLE INSERT DRILL PART NO. V30 72820 ABS 50 SHANK Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1113 Thanks for looking!
1.062" KOMET ABS 50 KUB INDEXABLE COOLANT FED DRILL V1232700
1.062" KOMET KUB INDEXABLE INSERT DRILL PART NO. V1232700 ABS 50 SHANK Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1111 Thanks for looking!
1.031" KOMET ABS 50 KUB INDEXABLE COOLANT FED DRILL V1232620
1.031" KOMET KUB INDEXABLE INSERT DRILL PART NO. V1232620 ABS 50 SHANK Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1109 Thanks for looking!
.985" KOMET ABS 50 KUB INDEXABLE COOLANT FED DRILL V1232500
985" KOMET KUB INDEXABLE INSERT DRILL PART NO. V1232500 ABS 50 SHANK Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1108 Thanks for looking!
.937" KOMET ABS 50 KUB INDEXABLE COOLANT FED DRILL V1232381
937" KOMET KUB INDEXABLE INSERT DRILL PART NO. V1232381 ABS 50 SHANK Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1107 Thanks for looking!
.875" KOMET ABS 50 KUB INDEXABLE COOLANT FED DRILL V1272220
875" KOMET KUB INDEXABLE INSERT DRILL PART NO. V1272220 ABS 50 SHANK Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1106 Thanks for looking!
.828" KOMET ABS 50 KUB INDEXABLE COOLANT FED DRILL V1232100
828" KOMET KUB INDEXABLE INSERT DRILL PART NO. V1232100 ABS 50 SHANK Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1105 Thanks for looking! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f1a4c5080-0xff-
.781" KOMET ABS 50 KUB INDEXABLE COOLANT FED DRILL V30 31980
781" KOMET KUB INDEXABLE INSERT DRILL PART NO. V30 31980 ABS 50 SHANK Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1104 Thanks for looking!
USED CLEVELAND CLEFORGE STRAIGHT SHANK COOLANT DRILL 1-5/8" (1.50" SHANK) 1.625"
LISTING IS FOR A USED STRAIGHT SHANK TWIST DRILL WITH THROUGH COOLANT BRAND- CLEVELAND SIZE- 1.625" FLUTE LENGTH- 9.50" OAL- 15.50" SHANK- 1.625" CONDITION- USED. MAY NEED RESHARPENED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER ... moreIN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IF ITEMS A
1-3/4" SPADE step Drill bit Cutter Tool 3/8" Thick Coolant Feeding Tip 2-15/64
Item. SPADE Drill Bit Tip Manufacturer. Unknown but probably AMEC Series. Diameter. starts at 1.750" then chamfers up to 2.230" Hole Size. 482" and.465" Locating Area. 1-3/4" 1.75" Blade Thickness. 3/8" Length. 2-1/2" Overall Condition. Good used. Not super sharp We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination ... morebut the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! Pay me securely with any major credit card through PayPal! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
PUMP ENGINEERS STRAIGHT-LINE COOLANT SYSTEM - #26751
QUOTE#26751 PUMP ENGINEERS STRAIGHT-LINE COOLANT SYSTEM EQUIPPED WITH: Straight Line Design(4) Compartments(4) Removeable Covers CATALOGUE SPECIFICATIONS: Overall Dimensions. Length. 84" Overall Dimensions. Width. 14.5" Overall Dimensions. Height. 19" Height Top Of Motor. 31" NOTE: This Coolant System Appears To Be In Brand New With Applications Anywhere Coolant Is Needed. PRICE: F.O.B. OUR WAREHOUSE. $1.250.00 MACHINE/EQUIPMENT SUBJECT TO PRIOR SALE.
ALFIE ALFA LAVAL IFB303X-73 SEPARATOR CENTRIFUGE COOLANT PURIFIER 98% THERE
NOTE: I WILL BE GOING ON VACATION AND WOULD LIKE TO SHIP THIS BEFORE I LEAVE. THE AVAILABLE DATES TO SHIP ARE JUNE 7& 10. IF IT DOES NOT SELL AND SHIP BEFORE THAT. I WILL END LISTING AND RE LIST IT WHEN I RETURN. 1998 ALFIE ALFA LAVAL IFB303X-73 SEPARATOR CENTRIFUGE COOLANT PURIFIER. SERIAL#4092747. PRODUCT# 881176-07-01 LOOKS LIKE THERE IS A PART MISSING FROM TOP OF GREEN CENTRIFUGE(SPIN ON OF SOME SORT? THIS UNIT LOOKS BARELY USED. I WAS ONLY ABLE TO MAKE THE UNIT WORK BY MANUALLY PUSHING IN THE RELAY AND IT RAN SMOOTH AT FULL SPEED. THERE MUST BE A SAFETY SWITCH OR? THAT WAS PREVENTING IT FROM WORKING WITH THE GREEN START BUTTONS. I AM SELLING AS PARTS. BUT, I THINK IT WON'T TAKE MUCH TO MAKE IT WORK 100% THESE ARE NOT MY AREA OF EXPERTISE. I DO NOT USE THESE AND KNOW LITTLE ABOUT THEM. SO, PLEASE DO YOUR OWN RESEARCH. SOLD AS ... moreIS WHERE IS, JUST THE WAY YOU SEE IT. BUYER PAYS FREIGHT FROM 97338 DALLAS OREGON. 165LBS. AGAIN. SOLD AS PICTURED AS IS. INSPECTIONS WELCOME. CALL JOHN PACIFIC TIME 8AM-5PM FOR? 310)717-1514.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f1c3d23b5-0x101-
Gardner 618 Surface Grinder with Coolant Pump
Gardner 618 Surface Grinder with Coolant Pump General Info: Stock# 54259 Condition: Used Tested: Yes Brand: Gardner Model: 618 Serial: 841-5 Year: N/A Weight: 825 lbs Shipping Dimensions: 62"W x44"L x 71"H Specifications: Includes 6 x 18 magnetic chuck table. New 7" grinder wheel, gusher coolant pump. Currently wired at 460V/ 3 Phase. Total dimensions 62" W x 44" D x 71" H. Additional Info: New grinder wheel has been installed. We are not trained mechanics or specialists of the following machinery listed and therefore can't guarantee full functionality or specs of the machine. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for ... morethis listing 7 days a week. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084 Visit Us on the Web at 1
COOLJET SYSTEMS HIGH PRESSURE COOLANT PUMP 70-30-SF
COOLJET SYSTEMS HIGH PRESSURE COOLANT PUMP 70-30-SF You are purchasing a Cooljet Systems HIGH Pressure Coolant Pump. Model: 70-30-SF This System is in great condition and is fully operational. Flow Rate/Max. Pressure: 8.0gpm@1000psi(30lpm@70bar) Standard Features Fixed Flow 8gpm up to 1000psi Single high capacity filter Single high-pressure outlet Filtered high and low pressure* Oil sight glass for easy maintenance Casters 208- 230VAC Interface cables and receptacle Hoses Compact Footprint(17” x 33” We can load on your truck at no charge and assist in the delivery. Thank you for looking!
Sumitomo KDS 10000 MAV 1" Coolant Through Carbide Tipped Drillbit
Sumitomo KDS 10000 MAV 1-1/8" Coolant Through Carbide Tipped Drillbit. Carbide tip 0.75" long two flutes with coolant channels length 6.8" shank: diameter 1.25" 2.3" long with 1.7" long flat Used but need to be resharpened because small chips on the edge of the carbide. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
kennametal carbide shank boring bar.3/8" shank,coolant thru.with 4 inserts.
end was broken off@ 3 1/2"will combine shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13f1e0995ca-0xf6-
kennametal carbide shank boring bar.3/4" shank,coolant thru.with 10 inserts.
uses cheap tpg#3 inserts. good condition.will combine shipping.
Sumitomo KDS 07500 MAV 3/4" Coolant Through Carbide Tipped Drillbit
Sumitomo KDS 07500 MAV 3/4" Coolant Through Carbide Tipped Drillbit. Carbide tip 0.52" long two flutes with coolant channels length 6.15" shank: diameter 1" 2.15" long with 1.63" long flat Used and good but may need to be resharpened. No significant defects. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Sumitomo KDS 08750 MAV 7/8" Coolant Through Carbide Tipped Drillbit
Sumitomo KDS 08750 MAV 7/8" Coolant Through Carbide Tipped Drillbit. Carbide tip 0.643" long two flutes with coolant channels length 6.4" shank: diameter 1" 2.15" long with 1.63" long flat Used and good but may need to be resharpened. No significant defects. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
MOSNIC RD3C-116AZM0S277A COOLANT FILTER 49'' X 90'' X 14''
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 11121260041 Manufacturer: MOSNIC Description: MOSNIC RD3C-116AZM0S277A COOLANT FILTER 49' X 90' X 14' Capacity: 49' X 90' X 14' Model Number: RD3C-116AZM0S277A Serial Number: 120322-17 Additional Information: NO PUMP BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email di
.687" KOMET ABS 50 KUB INDEXABLE COOLANT FED DRILL V1231750
687" KOMET KUB INDEXABLE INSERT DRILL PART NO. V1231750 ABS 50 SHANK Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1103 Thanks for looking! lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13f1eb8c1a6-0xfd-
indexable carbide insert drill through hole coolant 1 1/2" shank drill body .900
indexable carbide insert drill through hole coolant 1 1/2" shank drill body.900" depth of cut 2 1/2" No combined shipping and handling discount Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Indexable Spade Drill , Through Coolant 3/4" Shank drill body diameter 1/2"
Indexable Spade Drill. Through Coolant 3/4" Shank drill body diameter 1/2" No combined shipping and handling discount Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Indexable Spade, Through Coolant 3/4" Shank,drill range.365-.435
Indexable Spade. Through Coolant 3/4" Shank,drill range.365-435 diameter depth of drilling 4 1/2" No combined shipping and handling Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f1ecae4f0-0x103-
10 EL DORADO CARBIDE TIPPED COOLANT FED GUN DRILLS - .1250" to .4750"
aims 10 EL DORADO CARBIDE TIPPED COOLANT FED GUN DRILLS- 1250" to.4750" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by El Dorado. These are 10 used Carbide Tipped Coolant Fed Gun Drills in good condition. Specifications: Drill Sizes Range: 1250" to.4750" Shank Sizes Range: 3/4"OD- 335"ID Lengths of Cut Range: 1/2" to 1-1/4" Overall Lengths: 7-1/2" to 14-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 10 EL DORADO CARBIDE TIPPED COOLANT FED GUN DRILLS- 1250" ... moreto.4750" Reliable Tool Inc. c 2011 | Powered by
Varian V-3520 Magnet Coolant Control System V-2608 Regulated Magnet Power Supply
Varian V-3520& V-2608 Magnet System For sale is this used Varian V-3520& V-2608 Magnet System. It is in fair cosmetic condition. It is all quite a bit older and is fairly dirty with normal signs of wear. We have not been able to test out either one of these at all. Both will be sold completely as-is. Feel free to ask any questions and thanks for bidding. Includes: Varian V-3520 Magnet Coolant Control System Varian V-2608 Regulated Magnet Power Supply*This item is too large and heavy to ship with UPS Ground. As such. Buyer has the option of either having the unit shipped via freight, or picking it up in person from our warehouse here in Virginia. Be aware that if shipped freight, buyer assumes all shipping and packaging costs. Please contact us with ALL of the following information for a shipping quote: Your zip code. Whether it will ... morebe going to a commercial or residential address, and if you have access to a loading dock or fork lift for unloading. Quick Stop Auctions. Inc. Feel free to ask questions via email or(540)381-3011 17271. Powered by
LOT OF 5 Cat 50 Taper Pull Stud, Retention Knob, CAT50 Coolant Thru 1" 8
This listing is for a LOT OF 5 Cat 50 Taper Pull Studs/ Retention Knobs as shown CAT50 1" 8tpi Coolant Thru please see all photos and make sure these fit your machine before purchase if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equipment i can combine postage all items are sent within 2 business days thank you for viewing
500-672-10 Mitutoyo 0-6'' Digital Caliper CD-6"PS aBSOLUTE Coolant proof
500-672-10 Mitutoyo 0-6' Digital Caliper CD-6"PS Absolute Coolant Proof No combined shipping and handling Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
BG Coolant Flush Machine
This is a BG Coolant flush machine! Has all attachments just needs jugs! Still works good. If you have any questions please feel free to contact me by email! Happy bidding
MILLER ELECTRIC 43810 Low conductivity Coolant antifreeze 4 Gal.
This was pulled from a miller water cooler and is used. However is absolutely crystal clear and like new. SAVE a few bucks and buy this. The cooler was sold and could not be shipped with the coolant. thus the reason for this auction. The coolant is stored in clean distilled water jugs. Not the miller factory packaging MILLER TIG WELDER COOLANT PART# 043810 CASE OF 4 LOW CONDUCTIVITY ANTIFREEZE/ COOLANT Miller coolants contain a base of ethylene glycol and deionized water to protect against freezing to-37°F(38°C) or boiling to 227°F(108°C) Also contains a compound that resists algae growth.
15 KVA AMES WELD SPOT WELDER,24" ARMS, COOLANT, TIPS
SquareTrade © AP6.0 THIS IS A 15 KVA SPOT WELDER MFG BY AMES WELD. HAS 24" COPPER ARMS, EXTRA TIPS AND COOLANT. RUNS ON SINGLE PASE 230, SER 279, WITH COOLANT IN GOOD OPERATING CONDITION. WIRED 230V/1/60. STILL IN SHOP UNDER POWER. LOCAL INSPECTIONS AND PICK-UPS ARE WELCOME WEIGHT 1000 LBS. ANY QUESTIONS CONTACT GERRY BY E MAIL OR 727-547-0616 On Aug-02-11 at 21:26:21 PDT. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
COOLANT-THRU #4 MORSE TAPER TO #3 MORSE TAPER DRILL HOLDER
This is a#4MT to#3MT adaptor for a lathe or mill etc. I can't see a makers name but it's very nicely made and looks american made. It is in great shape with no damage except for some minor staining. It has a live bearing around the collar(see pics) Don't miss this as it includes FREE Priority shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my ... morechoice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
USED KOMET CARBIDE COOLANT INSERT DRILL ABS-80 56.55mm
LISTING IS FOR USED KOMET INSERT DRILL PART# UV1400270 DESCRIPTION- ABS 80 1/ 56.55/ 66.50 R53 DIAMETER- 56.55mm FLUTE LENGTH- 66.50mm COUPLER- ABS 80 USES INSERTS- W29 50010.04 HAS CHAMFERING INSERT POCKET SEE PICTURE CONDITION- VERY GOOD USED Normal 0 Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST ... moreBE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THE
VINTAGE PEAK ANTIFREEZE & COOLANT THERMOMETER ADVERTISING SIGN 10" DIAMETER
ANTIFREEZE& COOLANT THERMOMETER ADVERTISING SIGN GREAT SHAPE FOR ITS AGE IT HAS SOME MINOR SURFACE RUST ON THE BACK AND A MINOR BEND ON THE TOP HANGER. ZOOM IN ON THE PICTURES TO SEE CONDITION. BUYER PAYS FOR SHIPPING INSURANCE MEASURES APPROXIMATELY 10" DIAMETER X 1 1/2" THICK WE WILL COMBINE SHIPPING TO SAVE YOU MONEY ON MULTIPLE PURCHASES OUR SHIPPING PRICES ARE FOR SHIPPING& HANDLING.WE ALWAYS ADD A TRACKING NUMBER WHENEVER POSSIBLE SO BUYERS CAN TRACK THEIR PACKAGE. HANDLING CHARGES DO NOT SHOW ON THE SHIPPED PACKAGE OR EBAY PAGE. INTERNATIONAL BUYERS PLEASE UNDERSTAND THAT WE CAN'T CONTROL THE SHIPPING TIMES OF YOUR COUNTRY. WE SHIP ITEMS WITHIN ONE BUSINESS DAY OF PAYMENT CLEARING BUT SOME COUNTRIES ARE SLOWER THAN OTHERS ON THEIR SHIPPING TIMES. CUSTOMS, ETC. SO PLEASE BE PATIENT. BUYER IS RESPONSIBLE FOR ANY ... moreIMPORT TAX OR OTHER FEES. CHECK WITH YOUR LOCAL POSTAL CARRIER FOR INFORMATION PLEASE MAKE PAYMENTS WITHIN 3 DAYS FROM END OF AUCTION AN UNPAID ITEM CASE WILL BE OPENED AUTOMATICALLY AFTER 4 DAYS IF PAYMENT IS NOT RECEIVED THANK YOU! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f24b4da55-0x104-
AMEC SPADE DRILL 990318-19 STRAIGHT SHANK THROUGH COOLANT
AMEC SPADE DRILL 990318-19 STRAIGHT SHANK THROUGH COOLANT 26" OAL 1-1/2" SHANK
62 pcs lot of Mazak Retension Knobs 01401751 thru spindle coolant 45 degree
62 pcs lot of Mazak Retension Knobs 01401751 thru spindle coolant 45 degree Retail for $30.00 each(That's $1860/for 62 pcs. Knob Diameter(Decimal Inch) 0.7400, Thread Size 5/8-11, Hole(Y/N) Y, Shoulder Diameter(Decimal Inch) 0.8660, Hole Diameter(Decimal Inch) 0.2810, Flange Type Cat V Flange, Overall Length(Decimal Inch) 1.6240, Length(Decimal Inch) 0.4400, Neck Diameter(Decimal Inch) 0.4900, Pilot Hole Diameter(Decimal Inch) 0.6350,
NEW SURPLUS KOMET CARBIDE INSERT COOLANT DRILL ABS-80 67.38mm
LISTING IS FOR A NEW SURPLUS KOMET INSERT DRILL PART# UV1400410 DESCRIPTION- ABS 80 KUB2/ 67.38/ 66.50 R53 DIAMETER- 67.38mm FLUTE LENGTH- 66.50mm COUPLER- ABS-80 USES INSERTS- W29 50010.04_ NOT INCLUDED) HAS CHAMFERING INSERT POCKET SEE PICTURE CONDITION- NEW SURPLUS Normal 0 Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT ... moreOPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RI
ATAGO Hand Refractometer N-10, CNC coolant, machinist, toolmaker
ATAGO Hand Refractometer N-10 Brix 0-10% With padded storage case. We used this with Hangstrafers& Blaser Swiss Lube. For this price you can have your own one! Working condition. Shipping will be Priority Mail with Tracking included in costs. New from MSC costs $225.00. Payment due in 3 days.
iscar coolant thru insert drill with 3 new inserts.carbide ream with buy it now.
comes with 3 new.358 tips.472 shank.free sgs.375 reamer with buy it now only. will combine shipping.
John Deere H H909R lower water coolant pipe #2
John Deere H H909R lower water coolant pipe. This fits Hs after 27000 serial number. Please see pictures. There are some rust pits where the hose clamps and there is a small cut where the gasket goes. I think the gasket would hold fine but I would use some silicone to fill it. It does look solid. We are parting out several 60s. 620s, 630s, 70s, 720s, and 730s, and will be listing some parts off of them as time allows. We also have a few parts for A, B, D, G, H, 50, 520, 530, 80, 820, 830. If you need something, just email us and we will put it on Ebay. We try our best to describe EVERY part accurately. We will not describe something as"rebuilt" or"remanufactured" just because something has a couple new or shiny parts. If we describe it as rebuilt, we will have done it, had it done, or be sure it was actually rebuilt. We ... moretry our best to have all parts washed and not grease covered when we ship them but sometimes some do not get bare metal clean before shipment. The parts we sell are usable and in nice shape unless otherwise noted in the description. About us: We repair. Restore, and use John Deere two cylinder and new generation tractors. We also have dealerships for new parts, please email us if you need anything. We take pride in what we sell, whether it is a part or a tractor. Thank you for you time. Return policy: We ask to be contacted within 2 weeks after you receive the part or tractor. After that, the part or tractor is yours. International shipping: We will ship to most countries. Please email for quote.
mitutoyo ip66 6" digital slide calipers. Coolant proof in perfect condition
These are like new Digital coolant proof slide calipers. I retired from industry shortly after buying them new. feel free to ask any questions.
MITUTOYO IP 67 ABSOLUTE COOLANT PROOF DIGITAL ELECTRONIC CALIPER *12
MITUTOYO IP 67 ABSOLUTE COOLANT PROOF DIGITAL ELECTRONIC CALIPER*12 Condition/I n fo: Very Good condition. Some light engraving and scratches on the plastic, calibrated in March of this year. I just installed new fresh batteries; case included. The scale/rule in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me if you are going to bid on multiple auctions& when you are done bidding; wait for me to send you an invoice with your shipping discount. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will ... morebe happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
0-6"/150MM MITUTOYO ABSOLUTE COOLANT PROOF CALIPER MACHIIST TOOL
MITUTOYO ABSOLUTE DIGITAL CALIPER COOLANT PROOF. P/N: 573-701 RANGE: 0-6"150MM. RESOLUTION: 0005"0.01MM. WORKS EXCELLENT. CONDITION: SEE PICTURES. WE DO COMBINE SHIPPING. PAYMENT DUE WITHIN 3 DAYS FROM DATE OF SALE.
Mitutoyo Absolute 8" Digital Caliper CD-8"PSX Coolant Proof IP67, No Reserve
KENDALE PAWN SHOP SANFORD N.C. 919) 774-7195 THIS ITEM HAS NO RESERVE Mitutoyo Absolute 8" Digital Caliper CD-8"PSX Coolant Proof IP67 in excellent condition. What you see in the picture is what you will get. Shipping and handling charge will be $10.00. We are listing several machinist tools and will be glad to combine shipping. Just let us know if you want more than one item. We accept Paypal. NOTE: All N.C. Sales ADD 7% sales tax. We ship to the U.S. only. Alaska and Hawaii bidders should email us first as s/h charge will be more. We are here to help you try to find any item that you want. We test all items to the best of our ability and we give a 30 Day warranty with all items we sell unless Listed“AS IS” If there is a problem with any of our items contact us via. Email or by phone at(919) 774-7195. Check out our feedback ratings ... moreand Bid with assurance that we pride ourselves on customer satisfaction. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
MITUTOYO ABSOLUTE DIGITAL CALIPERS CD-6PSX COOLANT PROOF IP67 ROUGH SERVICE
As shown. Mitutoyo Absolute 6" digital calipers, model CD-6PSX coolant proof IP67 for rough service applications. Stainless steel and ABS body. These calipers are basically brand new and look it, rarely ever used. No disappointments here! Fast shipping is only $3.95 and payment is due within 3 days of auctions end. Please check out my other auctions for more great items as I happily combine shipping. Thanks for looking!
SANDVIK 24MM INDEXABLE INSERT COOLANT DRILL 880.D2400L25-02
SANDVIK COROMANT INDEXABLE DRILL PART NO. R416.2-0310L40-31. 24MM DIAMETER. 25MM SHANK Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1099 Thanks for looking!
GUHRING 24.001-25.500 INTERCHANGEABLE INSERT COOLANT DRILL 1" SHANK
GUHRING INDEXABLE DRILL 24.001-25.500 DIAMETER RANGE 1" SHANK Nice used condition. Actual item pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $7.50 for USPS Priority Mail shipping with tracking. STOCK#DR1101 Thanks for looking!
ALLIED F SERIES COOLANT FED SPADE DRILL NO.5 MORSE TAPER F-500-5MT-SR
ALLIED F-500-5MT SPADE DRILL HOLDER PART NO. 21861-0005 3" 3-7/8" BLADE RANGE. 11-1/2" FLUTE LENGTH. COOLANT FED NO.5 MORSE TAPER SHANK Very good used condition. Actual item pictured. Payment due within five days of purchase. Check. M/o, PayPal, and credit card accepted. Buyer pays actual shipping cost. STOCK NO. SD760 Thanks for looking!
1-1/4" KENNAMETAL METCUT INDEXABLE COOLANT FED DRILL 270-0125
KENDEX METCUT INDEXABLE DRILL PART NO. 270-0125 1-1/4" DIAMETER. 1-1/4" SHANK Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1118 Thanks for looking!
Help