|
CUT OFF CARBIDE INSERT HOLDER 3/8" WITH 7 INSERTS
Used cut off carbide insert holder 3/8" + 7 inserts.
|
|
|
USED DEVLIEG BORING BAR With Carbide Inserts CARTRIDGE SS15-BS262-20
LISTING IS FOR A USED DEVLIEG BORING BAR WITH CARTRIDGE BORING BAR PART# SS15-BS262-20 CARTRIDGE PART# 070 BS030 TN3F SHANK- 1-1/2" OAL- 9.00" CARTRIDGE INFO: MINIMUM BORE 90° SQUARE MOUNTED 60° LEADING EDGE ANGLE USES INSERT- TNMG 332(NOT INCLUDED) BORING RANGE- 2.62" 3.37"+/ CONDITION- VERY GOOD USED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM ... moreTO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYT
|
|
|
DEVLIEG MICROBORE Carbide Inserts TURNING CARTRIDGE 100TS-090-TN3F TNMG
LISTING IS FOR A DEVLIEG MICROBORE TURNING CARTRIDGE P/N- 100TS-090-TN3F MINIMUM BORE- 3.19" SERIES 10 CARTRIDGE SQUARE 90 DEGREE MOUNTED 0 DEGREE LEADING ANGLE USES INSERT- TNMG 322(NOT INCLUDED) CONDITION- VERY GOOD USED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS ... moreDAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF
|
|
|
SANDVIK RA265.2 FACE MILL SFA 42 CARBIDE INSERTS M077S
SANDVIK 4" MAX-I-PEX FACE MILL PART# RA265.2-100E. USES SANDVIK SFA 42E3R CARBIDE INSERTS. USED FOR MILLING ALUMINIUM.
|
|
|
Scrap Carbide End Mills, Inserts, Saw blades, pico bars 33 LBS.
Scrap Carbide End Mills. Inserts, Saw blades, pico bars 33 LBS.
|
|
|
1" Ball Nose Indexable Cutter end mill LMT Fette Radius Carbide Inserts LC609T
Here we have qty.1 USED insert per bid. Looks to be in ok shape yet. Has some tiny chips here and there, nothing serious. Thickness is 4mm The center hole is 6mm diameter Overall Length tip to Flat measures about 21.72mm Made by LMT Fette I do not have the original packaging. This is not an actual photo but it is pretty much exactly like the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each. We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. ... moreIf you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd. NW Grand Rapids. MI 616-791-9395 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14460fadf5c-0x10c-
|
|
|
Brown Sharp Calipers End Mills Indust. Drills Carbide Reamer,lather Tool Inserts
Brown and Sharp 12" calipers.1/2" carbide tip reamer,Lathe tool holder and inserts, 132 pcs of small cobalt coated.070 drills(USED ONLY ONCE) 1/2 end mills,large assortment of High quality industrial drills,very sharp and hold there edge very well.Several great taps one is pipe tap.Several nice center drills. And a brand new lathe part off tool.These cutting tools would value way over $100 new,of course there used but they are in awesome condition. The calipers are a little older but still very usable. Thanks Randy Posted with
|
|
|
KENNAMETAL 1/2" SHANK CARBIDE BORING BAR LOT w/11 NEW CPMT Inserts +1" OD SLEEVE
Greetings and thanks for checking out my item! Available here is a nice. Used Kennametal 1/2" shank, coolant thru, solid carbide, screw-down boring bar. Also included are 10 Kennametal carbide CPMT inserts. Grade KCM25(retail $16.71 each) Each set of diamond inserts come in their original factory packaging. The boring bar is part number L08R-SCFPR2. It is 1/2" diameter. It has been trimmed down to 4-1/2" OAL. The bar is in perfect shape- other than being trimmed down- it could pass for new. The lot also includes a 1" OD boring bar sleeve. The sleeve is 2.68" long. 1" OD with a 1/2" opening to fit the boring bar. This sleeve is all you need to load this boring bar into your turret block and start cutting! The bar and sleeve are in great used condition. The Kennametal carbide inserts are all brand new and ... morecost $183.81 from MSC. I have this entire lot including ALL shown priced for a QUICK sale at the bargain price of just $80.00 BIN OBO. Shipping cost is $5.80. They will ship in a priority mail small flat rate box. I DO combine shipping. So please check out my other items for more cool machining and automotive stuff! I do have a brand new Kennametal 1/2" bar in a seperate listing. If you were interested in both tools- I would consider offers. Thanks for checking out my item!
|
|
|
3/4" BORING BAR & CARBIDE INSERTS LATHE MILL TOOL BITS MACHINIST TOOLMAKER
3/4" x 4 15/16" LG. BORING BAR 5/8" SHANK FITS BRIDGEPORT BORING HEADS& LATHE HOLDERS. IN GREAT SHAPE, COMES WITH 4 LIGHTLY USED INSERTS USED ON ALUM. MOST TIPS STILL IN GOOD USEABLE SHAPE, INSERT IN BAR HAS ONE NEW SIDE. PLEASE CHECK MY OTHER ADS FOR MORE TOOLING. THANKS. SALES& SHIPPING TO USA ONLY. PAYMENT DO IN FIRST 24 HRS. AFTER SALES END AND I WILL SHIP BY NEXT DAY. THANKS. NOTE: USE SHOPPING CART FOR MORE THAN ONE ITEM PURCHASE FOR COMBINED SHIPPING COST. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14467a840ee-0x105-
|
|
|
KENNAMETAL Carbide Inserts VNMP332 K313 (5)
KENNAMETAL CARBIDE INSERTS- Pkg of 5 VNMP 332 K313 Any questions please contact
|
|
|
75 carbide inserts insert some Thinbit machinist toolmaker tool tools
you get what you see except for the $1.a few have been used.rest new.nice variety.Connecticut buyers to pay 6.35% sales tax. I will combine.Handling$1 per Ebay item on combined orders only.on combined orders I charge actual shipping costs plus $1 handling per item. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1446b7e8415-0x110-
|
|
|
2 1/4" DIA. HEAD x 6" LG. CARBIDE INDEXABLE INSERT FACING END MILL & 10 INSERTS
2 1/4" HEAD x 1 1/4" DIA. x 4 3/4" LG. SHANK x 6" OAL. HEAVY DUTY. + 5 NEW& 5 PARTLY USED CARBIDE INSERTS, HAS OFF SET INSERT PLACEMENT, IN VERY GOOD CONDITION LOOKS HARDLY USED ESTATE FIND, THE SHANK COULD BE TURNED DOWN TO FIT SMALLER HOLDER, PLEASE CHECK ALL PICS. CHECK MY OTHER ADS FOR MORE TOOLING. I DO HAVE MORE TO LIST YET ALSO, THANKS SALES& SHIPPING TO USA ONLY PAYMENT DUE IN 24 HRS& I WILL SHIP BY NEXT DAY. THANKS NOTE: USE SHOPPING CART FOR COMBINE SHIPPING WITH OTHER ORDERS SO WAIT FOR AN INVOICE FOR MORE THAN ONE ORDER. THANKS
|
|
|
Seco 1pcs.indexable Drill SD503-21-63-50R2 suitable SCGX SPGX carbide inserts
You are purchasing. Seco 1 pcs. Drill SD503-21-63-50R2 Drill is used. But"like new" All Dimensions are metric. Please note: Delivery times are transit times and relate only to the shipping. The delay by customs import is not considered. PAYMENT Please confirm your mailing address with payment. Otherwise I will mail your item to your address in E-bay registration and it’s your responsibility to be correct. Not mine. We ship promptly within 24 hrs after receiving your payment. Returns If You are unsatisfied for any reason please contact us to discuss possible solutions or arrange a return of your item. We strive to maintain 100% customer satisfaction. Contact If you need detailed information about our stock items or if you have any questions or comments regarding your purchase. Please contact us at: Information about our stock items ... moreor if you have any questions or comments regarding your purchase. Please contact us at: info@wendeplatten-eu.com.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1446b82a14a-0x10a-
|
|
|
27 LBS OF CARBIDE SCRAP, SOLID END MILLS,BORING BARS AND INSERTS
27 LBS OF CARBIDE SCRAP. SOLID END MILLS,BORING BARS AND INSERTS SELLING WITH NO RESERVE! Hello what we have for auction is 27lbs of scrap solid carbide end mills.Boring bars, inserts. Some of the end mills are good,some can be recondition, but they're being sold as scrap. I bought these at a machine shop that was going out of business auction. Thank you for the interset Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: Rick Fancon 317 W State Clare.Mi 48617 Standard Shipping: Our items are shipped U.S Postal Service or FedEx. We ship Monday. Wednesday and Friday. We try to combine shipping on multiple purchases whenever possible. ... morePlease contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" with no warranty or guarantee. If you ever have any questions or need to contact us for any reason. Please feel free to do so! We do our best to reply as promptly as possible. Because of Ebay's new policy, we are not able to provide our email address, however please feel free to contact us thru Ebay messages if you have any questions o
|
|
|
SECO MINI MASTER MM12-0.75-3.7-3 HOLDER WITH 26 SOLID CARBIDE INSERTS
SELLING MY SLIGHTLY USED SECO MINIMASTER HOLDER WITH INSERTS. I AM SELLING THIS AS USED INCLUDING THE INSERTS. THE INSERTS ARE USED AND MOST ARE STILL IN SEAL PEEL AFTER BEING RESHARPENED. 22 FLAT INSERTS AND 4 BALL INSERTS. NO WRENCH INCLUDED. I CHECKED THIS FOR RUNOUT AND FOUND IT TO RUN TRUE. I USED THIS MYSELF YEARS AGO. BUT I DO NOT NEED ANY MORE. SORRY ABOUT POOR PHOTOS. MY NAME IS SLIGHLY ENGRAVED ON THE HOLDER. THIS IS A TRUE AUCTION, NO RESERVE. PLEASE ASK ANY QUESTIONS. SHIPS WORLDWIDE. SHIPPING WORLDWIDE USING SMALL FLAT RATE BOX. SO CALULATE SHIPPING TO YOUR AREA.
|
|
|
ALORIS CA-12N QUICK-CHANGE TURNING HOLDER FOR CARBIDE TRIANGULAR INSERTS
This is an Aloris Quick Change Tool Holder in Excellent Condition. Specifications: Model: CA-12N Accommodates standard triangular carbide insert negative rake. Furnished with fully adjustable carbide chipbreaker and carbide shim to protect the holder.
|
|
|
NTK3R KC730 TOP NOTCH & PTK3R R321 & OTHER SIMILAR-68 USED SOLID CARBIDE INSERTS
some worn cutting edges.some look new.PLEASE LOOK AT PHOTO CAREFULLY 68 SOLID CARBIDE inserts with weight@ 1.415 POUNDS PayPal Thank you.
|
|
|
KENNAMETAL 1/2" CPG BORING TOOL HOLDER CARBIDE INSERTS B450
KENNAMETAL 1/2" CPG BORING TOOL#S08 SCLPR2. RIGHT HAND 1/2" DIA. x 8" LONG 20 NEW CPGM 21.505 C5C CARBIDE INSERTS
|
|
|
KENNAMETAL 1/2" NPL CARBIDE BORING TOOL HOLDER CARBIDE INSERTS B449
KENNAMETAL 1/2" NPL CARBIDE BORING TOOL#E08 NKL CL05 KMT B-L-99 3508. RIGHT HAND 1/2" DIA. x 8 3/16" LONG 10 NEW NPL 505 C5C CARBIDE INSERTS:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1447f428f03-0x101-
|
|
|
KENNAMETAL 1/2" TPG BORING TOOL HOLDER CARBIDE INSERTS B448
KENNAMETAL 1/2" TPG BORING TOOL#A08 CTFNR NK3. RIGHT HAND 1/2" DIA. x 8" LONG 10 NEW VALENITE TPG 221 VC903 CARBIDE INSERTS
|
|
|
KENNAMETAL 3/4" SCLPR BORING TOOL HOLDER CARBIDE INSERTS B447
KENNAMETAL 3/4" SCLPR BORING TOOL#S12-SCLPR3. RIGHT HAND 3/4" DIA. x 10" LONG 20 NEW CPGM 32.505 C5C CARBIDE INSERTS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1447f428c67-0xfa-
|
|
|
KENNAMETAL 3/4" CARBIDE BORING TOOL HOLDER CARBIDE INSERTS B446
KENNAMETAL 3/4" CARBIDE NPR BORING TOOL#E12NKT CLO5 L-T-3-95. LEFT HAND 3/4" DIA. x 10" LONG 9 NEW AG&I NPR52 AG50B CARBIDE INSERTS
|
|
|
11/16" x 4 1/2" LG. CARBIDE INDEXABLE INSERT BORING BAR & 20 INSERTS BRIDGEPORT
11/16" DIA. X 4 1/2" LG. INDEXABLE CARBIDE INSERT BORING BAR WITH 12 NEW& 8 PARTLY USED INSERTS. BAR SHANK IS 5/8" X 5/8" FITS BRIDGEPORT BORING HEADS OR LATHE HOLDER OF THAT SIZE, HARDLY USED IN VERY GOOD CONDITION HAS A FEW NICKS FROM SET SCREW IS ALL. PLEASE CHECK ALL PICS. CHECK MY OTHER ADS FOR MORE TOOLING. I DO HAVE MORE TO LIST YET ALSO, THANKS SALES& SHIPPING TO USA ONLY PAYMENT DUE IN 24 HRS& I WILL SHIP BY NEXT DAY. THANKS NOTE: USE SHOPPING CART FOR COMBINE SHIPPING WITH OTHER ORDERS SO ASK FOR AN INVOICE FOR MORE THAN ONE ORDER. THANKS
|
|
|
Fly Cutter Massive 4” Erickson #30 NMTB Quick Change Carbide Inserts
Fly Cutter Massive 4” Erickson#30 NMTB Quick Change Carbide Inserts Up for auction is this hard to find used Erickson HY-TEN FLYER quick change fly cutter. It had some surface rust from sitting in my shop. That I knocked off with steel wool. This unit is very heavy at over 4 lbs. With its mass and rigidity it should give great results. Over all length 6” Why you should Bid and Buy from Us It is our goal to make your experience with Fancy-Mix hassle-free and pleasant. If anything is not acceptable to you. Please contact us immediately and we will make every effort to correct any difficulties. Feedback is very important on eBay as it builds trust and indicates to others pleasurable experiences. When you receive your item or items and are satisfied. We would greatly appreciate you leaving us positive feedback, as we are striving to maintain ... morethe highest possible rating. We will leave you positive feedback on completion of your payment. We make every effort to accurately describe our items. Our pictures will identify any flaws that we are aware of. Please submit your payment within 3 days after the close of the auction. Failing to do so may result in us re-listing the item and you receiving a mark as a non-paying bidder. Unless otherwise specified above. These are our return policies: Returns: 14 day money back guarantee. Buyer pays return shipping. If item is incorrect or misrepresented by seller. Seller pays return costs. Item must be returned in the same package and condition. Including all items and any instructions as shipped. Please contact us before shipping anything back. Shipping: We ship to the US only. Alaska and Hawaii please contact us first for extra shipping costs. If you win multiple items. We will combine the shipping costs to save you money. Please wait for an email from us indicating your total amount due. We usually ship within one business day after payment is received. Payment: We only accept PAYPAL. Local pickups– Please contact me to arrange payment.
|
|
|
Aloris CXA-12 Tool holder + twenty TPG carbide inserts
Aloris CXA-12 insert tool holder in very good used condition. Uses tpg 321/322/323 etc with twenty one new RTW 322 TIN coated inserts grade included grade 8008 is comparable to industry standard c-5/c6 please check out my other auctions for more tool holders
|
|
|
10 X ISCAR 16ER60 16IR60 Threading Carbide Inserts Vardex 3ER 3IR
This auction for: ISCAR 10pcs lot Threading Carbide Inserts 16ER M 60AG/G IC908 x 5pcs 16IR M 60AG/G IC908 X 5pcs* Inserts will send safety without box. I mark those inserts has used beacuse thay come from factory that close. Thay was toghter in the same box and have some touches from each other. I believe that thay have 90%+ tool life. I tried to take a picture as best as i can. Please check well and if there any questions please contact me before you bid. Buy From A Trust Seller! Check out Our Feedbacks! We accept PayPal only. Please clear payment in 2 days. We ship worldwide with standard air mail. All custom and fees are the buyer responsibility. For Ems shipping rates please contact me. Our business work since 1990 and sell wholesale and individuals micro tools. And industry equipment to all over the world! We have in stock all sizes ... moreof micro drills. Micro endmills, and others 1/8 shank tools. Our goods is the BEST QUALITY in the market, and check well before shipping to keep you. As our customers satisfied! We Believe that high quality tools. Good service, good customer support. And fast handling time, are the keys for success! Your satisfaction is in our first priority. Please feel free to with any questions. and don't forget to, and make sure to! Thanks for your business!
|
|
|
Cabinet door profile cutter. Unique Profile #-2761 with carbide inserts
Unique Door Profile with insert-able cutters. The cutters that are in the head are sharp and have many sharpenings left. Included are 3 new carbide cutter inserts. This is a professional tool. 6" dia x 1-1/4" bore and 1-3/16 thick. I prefer PayPal but will accept checks. If paid by check. I will ship after the check clears.
|
|
|
5/8" HEAVY METAL TPG BORING TOOL HOLDER CARBIDE INSERTS B445
5/8" TPG HEAVY METAL BORING TOOL RIGHT HAND 5/8" DIA. x 5 3/8" LONG 10 NEW KENNAMETAL TP41 KC810 CARBIDE INSERTS
|
|
|
Parlec CAT40 Tool Holder CNC/ Ingersoll Indexable Carbide Inserts Endmill 22J3X
INGERSOLL 22J3X-1002080R01 INDEXABLE END MILL ON A PARLEC CAT40 TOOL HOLDER IN VERY GOOD USED CONDITION. THE INGERSOLL END MILL IS IN EXCELLENT CONDITION& PARLEC CAT 40 TOOL HOLDER IS IN GOOD USED CONDITION. NEITHER HAS ANY DAMAGE& ARE READY TO USE. IT COMES WITH 5 EXTRA CARBIDE INSERTS#AOMT120432R IN1030. I TOOK LOTS OF PICTURES SO BE SURE TO CHECK THEM OUT. THIS WAS PURCHASED FROM A WORKING SHOP THAT JUST RECENTLY CLOSED. I WILL BE LISTING QUITE A FEW TOOLS OVER NEXT FEW WEEKS SO BE SURE TO CHECK OUT MY OTHER ITEMS FOR SALE& SAVE ME AS A SELLER BECAUSE I AM ALWAYS LOOKING FOR GOOD QUALITY TOOLS TO LIST. FEEL FREE TO CONTACT ME WITH ANY QUESTIONS YOU MAY HAVE. FREE SHIPPING TO THE LOWER 48 U.S. STATES. THANK YOU FOR LOOKING!
|
|
|
PHASE II NDEXABLE CARBIDE TIP BORING BAR 3/8" + INSERTS
PHASE II NDEXABLE CARBIDE TIP BORING BAR 3/8" + INSERTS Model No.SCLCR Shank 3/8" OAL: 4" Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need something. Don't see it listed? Drop us a line@ RandC.auctions@gmail.com*
|
|
|
Kennametal 1/2" Boring Bar A08-STUNR2 NA6 8" Long Plus 10 Carbide Inserts
Kennametal ½" boring bar with coolant hole thru. Excellent condition. Model# A08-STUNR2 NA6. Includes 1 box of 10 new Kennametal carbide inserts.
|
|
|
KENNAMETAL 5/8" CARBIDE TPG BORING TOOL HOLDER CARBIDE INSERTS B444
KENNAMETAL 5/8" TPG CARBIDE BORING TOOL#C105 KTFPR2. RIGHT HAND 5/8" DIA. x 10" LONG 10 NEW KENNAMETAL TPGN 09 02 04 KC730 CARBIDE INSERTS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1449374052a-0x10e-
|
|
|
QUICK CHANGE CNC LATHE TOOL HOLDERS CARBIDE INSERTS SECODEX CARBOLOY VALENITE
DESCRIPTION: USED AND NEW TOOL HOLDERS. THE SHANKS ARE 1" X 1" AND 3/4 X 1" THE AUCTION IS FOR ALL. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE ... moreMAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WAL
|
|
|
Lot of 33lbs Scrap Carbide Inserts ~ All Broken and Used ~ NO reserve Auction
Up for sale we have Lot of 33lbs Scrap Carbide Inserts ~ All Broken and Used The weight with the box is 33 lbs 15.2 ounces The box by itself weighs 4.4 ounces So the actual weight according to my scale is 33 lbs 10.8 ounces My scale is usually accurate on weight but just to make sure I'm advertising this lot only weighing 33 lbs even. Shipping cost will include insurance* THIS ITEM IS UNCLAIMED FREIGHT- BOX/ITEM MAY SHOW SIGNS OF DUST/ WEAR/ WRITING/ SCRATCHES/ GREASE FROM STORAGE. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value, or condition of any item. Do not assume anything about the item(s) included in this sale. We do not claim to be experts on any of the items that we sell. We do the best research we can and represent ... morethe item(s) as clearly and honestly as possible. If you have any questions or concerns regarding compatibility or specific technical specifications, we will do our best to answer them. Ask all? before bidding Check my store out and yes I do combine shipping* Payment Policy: Payment is due when auction ends Unless otherwise stated in the auction. If payment is not made. An Unpaid Item claim will be filed with eBay. We ONLY accept paypal. Shipping Policy: We ship within the continental United States and will combine shipping for the Continental United States if you check with us first. Depending where you are located we MIGHT ship over sea’s if you contact us before the item ends. Also you need to know all the regulations for shipping to your country before bidding. If you ask for a shipping quote. You will receive just that a quote. Actual shipping may vary. The item will be shipped from zip code 64061 and State MO. You are more than welcome to look up your own quote. We only ship to a confirm paypal address no PO Boxes! We do not ship on weekends or holidays. Shipping Tim
|
|
|
US SHOP TOOLS COOLANT INDEXABLE SOLID CARBIDE BORING BAR 5/16" + INSERTS
US SHOP TOOLS COOLANT INDEXABLE SOLID CARBIDE BORING BAR 5/16" + INSERTS Current Bore: 3/4" Shank: 5/16" OAL: 5" Model No. AO5K SCLCR2* Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need some thing. Don't see it listed drop us a line@ RandC.auctions@gmail.com*
|
|
|
ISCAR 15/16" DZ INDEXABLE SERATED INSERT DRILL CARBIDE INSERTS B452
ISCAR 15/16" INDEXABLE SERATED DRILL#DZ 0937-2108-125-2.5. 2 FLUTES DRILL DIA. 15/16" x 2.11" DEPTH OF CUT SHANK 1 1/4" x 2 1/2" COOLANT COOLANT HOLE NPT1/4" 6 ISCAR WOLH2.5-1-GF IC328 OPTIMIZING CHIP SHAPE CARBIDE INSERTS
|
|
|
ISCAR SLANR 20-15 TANG LATHE TOOL HOLDER CARBIDE INSERTS B453
ISCAR SLANR 20-5 TANG(M) Turn-Groove Family: Screw clamped toolholders for LNMX tangentially clamped inserts. Recommended for heavy longitudinal and face turning. Designation: SLANL 20-15 TANG h h1 b l1 l2 f Ga° Gr° R/L 1.250, 1.250, 1.250, 6.000, 1.37, 1.46, 6, 6, L, Catalog No Primary View File(2D) Model(3D) Detail Model(3D) Light 3602120 Spare Parts 5520219, TLN 15L-HT, 7002843, SR RS4, 7000428, T-6/5, 7000000, SR 34-535-SN, 7002096, BLD T15/S7, For optimal tightening torque. Use SW4-FIX T15 optional torque limiting screwdriver. 7003805, SW6-T-SH,
|
|
|
Solid Carbide Indexable Boring Bar - Dia. 0.5 X 6" Lg - with Inserts
Solid Carbide Indexable Boring Bar- Dia. 0.5 X 6" Lg- with Inserts This Boring Bar is in Good Condition, The body. Insert pocket and insert screw is in excellent condition. Ample amount of set screw mark on clamping flat. The insert in boring bar is used with used still left on the insert. Included- 6 NEW Inserts WCMT 21.51/ WCMT040204 US735
|
|
|
(LOT of 10) Carbide Inserts V0V050340-VC2
LOT of 10) Carbide Inserts V0V050340-VC2 YOU ARE BIDDING ON(LOT of 10) CARBIDE Inserts V0V0050340-VC2. Great Deal! CLICK TO: Visit My eBay Store*International buyers. We will ship worldwide, contact us before you make your purchase for an international shipping quote. Monday-Friday 8a.m-5p.m Eastern 1-855-869-6191* WE WILL ENTERTAIN ANY OFFERS* If You Have Any Questions Please Call Jessie Cell 1-574-312-4837 Office 1-855-869-6191 THANKS AGAIN! RC RECYCLING. Location: I3 Tag# 5907 SHIPPING: Lot of 10 Carbide Inserts Listed By: JasonS We gladly accept PayPal. Certified Funds, Credit Cards or Cash for local pickups. Payments must be received within 4 days, of RC RECYCLING providing shipping details. Shipping price shown is for shipping in the US to lower 48 states only. International buyers. We will ship worldwide, contact us before you make ... moreyour purchase for an international shipping quote. We usually ship items on the day payment is received. Our shipping hours hours are from 8am-4pm Eastern time. FREIGHT SHIPMENTS: Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. ALL SHIPPING QUOTES WILL BE SHIPPING TO A BUSINESS WITH A FORK LIFT OR LOADING DOCK. IF IT IS GOING TO A RESIDENTIAL ADDRESS PLEASE MESSAGE US AND WE WILL ARRANGE A TRUCK WITH A LIFT GATE. PLEASE READ BEFOR BUYING Unless Sold As-Is(STATED IN THE DECRIPTION) All of our products come with a 14 Business Day Warranty. Beginning the day item is received. Returns are only accepted on items received in different condition or a mistake made by us. If your item is received in a different condition than stated(DOA. Not working properly etc? Please message us or call with your ebay item number ready We are more than willing to rectify any problems by replacing the item or issuing a FULL refund. Instructions for Returns: 1. Contact us! ATT: TINA. Message us first and then call us with your ebay item number ready(855)869-6191.We need to know what the issue is
|
|
|
1 INCH SHANK CARBIDE TIP LATHE TOOL HOLDER TPG432 W/10 INSERTS
1 INCH SHANK TURNING TOOL FOR LATHE. COMES WITH 10 NEW TPG 432 TIPS. COMES AS PICTURED.
|
|
|
KENDEX 3/4" SHANK CARBIDE TIP TOOL HOLDER W/ 7 INSERTS
KENDEX CUTTING TOOL WITH 7 INSERTS. USED. IN GOOD SHAPE, AS PICTURED
|
|
|
6 Lbs. Solid Carbide Scrap End Mills inserts drills
6.27 lbs. of solid carbide scrap end mills and insert what you see in the picture is what you get all cutters have been used chipped cracked and damaged.
|
|
|
1/2" Carbide BACKDRAFT Inserts Indexable End Mill Cutter Tool Holder BDR 6" Long
Here we have a Good used toolholder. Overall length is 6" I do not see a name on it. Looks like a Dapra though Shank size is 1/2" No model or other info is on it. The insert is 2.5mm thick and getting dull
|
|
|
DAPRA Carbide BACKDRAFT Inserts Indexable End Mill Cutter Tool Holder BDR 19mm
Here we have a Nice used toolholder. It was originally longer. Someone cut it to it's current length of 4-5/8" You can still read part of the Dapra name. Shank size is 3/4" No model or other info is on it. The insert is 3mm thick and used.
|
|
|
5.1 pounds of scrap carbide endmills inserts etc.!!
This auction is for 5.1 pounds of clean scrap carbide endmills. Inserts, etc. Thanks for looking. And good luck! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-144aa7f512c-0x101-
|
|
|
BORING BAR HOLDER 1" for CARBIDE INSERTS Sandvk TBBP-16
This is a 1" Sandvik 12" long in perfect operating condition. TBBP-16
|
|
|
Lot of 28 pieces Carbide diamond-shaped Lathe turning inserts
You are bidding one Lot of 28 pieces Carbide diamond-shaped Lathe turning inserts These inserts are lightly used and still have a lot of life left in them inscribed circle: 3/8" minor/major lengths: 392"1.112" Thickness.193" Hole.149" BY BIDDING ON AN ITEM YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS: Payments& taxes: Payments on items with a sale price of $200 or less must be made by the end of the first business day following the close of the auction or sale. Payments for items with a sale price greater than $200 must be made by the end of the 4th business day following the close of the auction or sale. Deferred payment to facilitate combined shipping: If you plan to bid on multiple items during a calendar week and wish to combine shipping on multiple items. You may defer payment until the end of that calendar ... moreweek so that shipping can be combined on a single invoice. Please bear in mind that the combined shipment may not go out until the following Monday. Please send me an email telling me of your intentions. If other arrangements have not been made and payment has not been received according the above payment schedule. QuickSilverAuctions reserves the right to cancel the sale and re-list the item. This right, reserved by QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. State sales tax is collected if your ship-to address is in the state of Colorado. If your ship-to address is in Boulder County. Colorado, county sales tax will be collected. If you ship to a location in the city of Boulder. Colorado, City tax will be collected. SHIPPING: Local pickup is fine but by appointment only. Please send an email to make arrangements. Combined shipping for combined purchases is offered whenever possible. Shipping will always be combined to mini
|
|
|
Carbide Inserts 26 Total Check Out List & Pics
Hi. Up for auction are these Carbide Inserts 1) Box of 10 Interstate(box info) Number on side of box(WA47) I-77 TPG-320 ICC-1214OM 2) Box of 2 Interstate Grade A2 Style TPGN-322 3) Box of 4 Teledyne Firth Sterling TXH Grade SPG 634 Style EI 4) Box of 10 Fette Art. Nr. 059313 Purchased from an estate of a fellow that was a machinist. Buyer to pay S& H. Thank You! Items will be shipped USPS Expedited Mail that gives you Insurance& a Tracking Number. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-144b18e4179-0x10e-
|
|
|
kennametal solid carbide turning bar 3/4" x 6" TPG 32 inserts included
Kennametal solid carbide turning bar Excellent condition 3/4" x 6" Uses TPG 32 inserts Includes 5 new Newcomer 322 NN25 inserts and 5 new Kennametal TPG 321 KC850 inserts Posted with
|
|
|
CIRCLE GCBI-312-6-3R , 5/16" DIA. CARBIDE BORING BAR,WITH 19 INSERTS
CASE MAY NOT BE CORRECT. BAR IS 5/16"DIA. X 6" OAL. COMES WITH NINE WPGT-602-CG5 INSERTS. AND TEN WPGT-605-CG5 INSERTS. PREVIOUS OWNER REPORTS BAR WAS USED ONCE
|
|
|
Mitsubishi Carbide 10 Piece Set Square Carbide Inserts A1256A8 M2
This is a set of 10 with one missing Posted with
|
|
|
Diamond Shape 10 Piece Carbide Inserts Set CNMG 643E OC 7115 Grade P57
This is a 10 piece set with one missing Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144bad519e2-0x113-
|
|
|
EVERDE SOLID CARBIDE BORING BAR WITH CARBIDE INSERTS
HERE ITS A VERY NICE SOLID CARBIDE BORING BAR FROM EVERDE TOOLS BBK-3260-R 3/8 DIAMETER 4 INCH LONG LOOKS LIKE NEVER ITS BEEN USE NO TRACE OF CHIPS OR WEARE IT COMES WITH 10 SANVIK CARBIDE ISERTS TCMT IF YOU HAVE ANY QUESTIONS FEEL FREE TO CONTACT ME I WILL RESPOND AS SOON AS I CAN I WILL COMBINE SHIPPING IF YOU PURCHASE MORE THAN ONE ITEM SO YOU CAN SAVE IN SHIPPING DON’T FORGET TO LOOK AT MY OTHER ITEMS
|
|
|
2 Carbaloy C1 STJPR-6-2 3/8" solide carbide boring bars with inserts
2 Carboloy STJPR-6-2 solid carbide boring bars. 3/8" x 6" Minimum bore.500" 7 TCMT 21.51-FT TP3000 new Secor inserts. 9 other used inserts that can still be used. Scale not included. Will ship upon receipt of confirmed PayPal payment.
|
|
|
CARBIDE TIPPED INDEXABLE BORING BAR 1/2" + INSERTS
CARBIDE TIPPED INDEXABLE BORING BAR 1/2" + INSERTS Current Bore: 5/8" Shank: 1/2" OAL: 5 1/2" Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need something. Don't see it listed? Drop us a line@ RandC.auctions@gmail.com* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-144be5e67e1-0x112-
|
|
|
SCRAP carbide inserts mill drill turning 10 plus lbs.iscar kennametal kyocera
BID IS FOR 10 plus pounds new& used INSERTS all clean FREE SHIPPING Please see the pictures Please read before bidding! By buying from us you agree that you have read and understood all of our policies. Payment details We accept PayPal only! Payment must be paid within 7 DAYS after the auction is closed. Shipping policy We ship worldwide with international flat rate shipping. Free shipping A tracking number will be provided within 24 hours of the product being shipped. Delivery time depends on destination and other factors. We do combine shipping when possible. For a combined shipping discount please contact us. Return policy If the item that you have purchased is damaged or not as described. Return it to us within 7 days. We will replace it if possible, or we will give you a full refund of the sale price. Sorry, shipping charges are ... morenon refundable) eBay feedbacks If you are satisfied with your purchase. Please tell others by leaving a positive feedback for us and we in return will do the same for you. If you are not satisfied. Please tell us, so that we may correct the problem.
|
|
|
Sandvik Coromant 100mm/4" face shell mill 8 carbide inserts NMTB 40 taper arbor
100mm shell mill. 8 inserts. Common triangles. NMTB 40 taper arbor. In just barely used condition. Near perfect. Prior owner ID inscription. Sorry. We cannot ship internationally. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-144c88f4fab-0xfb-
|
|
|
10 X ISCAR 16IR60 16IR ASSORTMENT Threading Carbide Inserts Vardex 3ER 3IR
This auction for: ISCAR 10pcs lot ASSORTMENT Threading Carbide Inserts* Inserts will send safety without box. I mark those inserts has used beacuse thay come from factory that close. Thay was toghter in the same box and have some touches from each other. I believe that thay have 90%+ tool life. I tried to take a picture as best as i can. Please check well and if there any questions please contact me before you bid. Buy From A Trust Seller! Check out Our Feedbacks! We accept PayPal only. Please clear payment in 2 days. We ship worldwide with standard air mail. All custom and fees are the buyer responsibility. For Ems shipping rates please contact me. Our business work since 1990 and sell wholesale and individuals micro tools. And industry equipment to all over the world! We have in stock all sizes of micro drills. Micro endmills, and others ... more1/8 shank tools. Our goods is the BEST QUALITY in the market, and check well before shipping to keep you. As our customers satisfied! We Believe that high quality tools. Good service, good customer support. And fast handling time, are the keys for success! Your satisfaction is in our first priority. Please feel free to with any questions. and don't forget to, and make sure to! Thanks for your business!
|
|
|
32mm ER D22A32-4-C25-10 ISCAR BUTTON MILL FOR RXCW10T3 CARBIDE INSERTS #91
YOU ARE BIDDING FOR 1 OFF BUTTON MILL MILLING TOOL! MADE BY ISCAR. PART NUMBER = ER D22A32-4-C25-10 THE TOOL IS NOT IN ITS ORIGINAL BOX THE CURRENT LIST PRICE FOR THESE BLADES IS £170.14 PLUS VAT! PLEASE NOTE THAT MY PRICE IS INCLUSIVE OF VAT! A VAT INVOICE WILL BE ALLOCATED! IF YOU ARE NOT HAPPY WITH YOUR PURCHASE YOU WILL RECEIVE A FULL REFUND. PLEASE READ MY FEEDBACK AND YOU WILL SEE I ONLY SELL TOP QUALITY TOOLS. I HAVE MANY OF THESE AND SIMILAR CUTTERS FOR SALE AND I SHOULD HAVE MOST IN MY EBAY SHOP WITHIN THE NEXT FEW WEEKS. Please note I will give postal discount for multiple purchases if agreed prior to purchase. I am always on the look out for any tooling of any description. Including job lots, company closures etc. I will also give top money for any SCRAP CARBIDE or HSS(inserts or broken or damaged tools) Please contact me ... moreon the details underneath and we can sort something out! PLEASE VISIT MY EBAY SHOP FOR MORE GREAT BARGAINS! CLICK ON THIS LINK If you require any more info on this. Or any of my tools please contact me on(Steve) 07808169247 I will always combine P&P when multiple items are purchased with some discount deducted from the total postage cost. This is discretional and the amount may depend on the frequency of the buyer! Please remember to request a total when buying multiple items as discounts won’t be given after payment has been made. All prices are inclusive of VAT and a VAT invoice will be sent with the order! TERMS OF SALE Please read all of these terms before bidding. By placing a bid you are confirming your agreement to the terms listed below. DESCRIPTION All items are described as accurately as possible COST No discussion regarding cost will be entered into after a listing has ended so please ensure you do not bid more than you are willing to pay or bid more than you think an item is worth. CHECKOUT& PAYMENT The Ebay Checkout Procedure must be completed within 72 hours of the item ending or contact from the buyer must be made if you are intending to bid on any items
|
|
|
HU-FRIEDY Suture Sharp Needle Holder with Carbide Inserts
Hu-Friedy Surgical Suture Needle Holder with Carbide Grips-Insert on Tip In Excellent used condition 6" Long with some minor use scuffing from drawer storage(see image) Initials on back Markings: HU-FRIEDY- GERMANY& CARBIDE GRIP- STAINLESS STEEL" Forceps sold as is and as shown in images NO RETURNS Patterson Dental Supply sells these for $203.50 each. PLEASE ASK QUESTIONS BEFORE BIDDING TO AVOID ANY MISUNDERSTANDINGS NOTE: Selling to state licensed dental. Medical or veterinary professionals ONLY Following statement as per eBay Policy: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser ... moreof this item before shipping of the item. Payment: Must be paid for within 48 hours of listing end
|
|
|
RED & YELLOW 1380 CUTTER 9.5", 10 CARBIDE INSERTS
Very good condition. RED& YELLOW 1380 CUTTER 9.5" 10 CARBIDE INSERTS 2" hole( Bore) in the Middle. Over all height including the inserts is about 2-3/4" I don't know what machine it fits What you see in the pictures is what you will receive. Feel free to contact us if you need further help. Thank you. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Sandvik Drill 880-D2800L32-02 Carbide Inserts U Drill
You are purchasing Sandvik Drill 880-D2800L32-02(used but in good condition Check product photo) ORIGINAL PACKED All Dimensions are metric. Please note: Delivery times are transit times and relate only to the shipping. The delay by customs import is not considered. Please confirm your mailing address with payment. Otherwise I will mail your item to your address in E-bay registration and it’s your responsibility to be correct. Not mine. PAYMENT We ship promptly within 24 hrs after receiving your payment. Returns If You are unsatisfied for any reason please contact us to discuss possible solutions or arrange a return of your item. We strive to maintain 100% customer satisfaction. Contact If you need detailed information about our stock items or if you have any questions or comments regarding your purchase. Please contact us at: info@wendeplatten-eu.com ... moreInformation about our stock items or if you have any questions or comments regarding your purchase. Please contact us at: info@wendeplatten-eu.com Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4 lbs. Slightly over four pounds of scrap carbide inserts FREE SHIPPING
Slightly over 4 pounds of scrap carbide inserts as shown in photo. FREE SHIPPING
|
|
|
KENNAMETAL KUB 1-3/8" INCH INDEXABLE COOLANT THRU DRILL & (9) CARBIDE INSERTS
This auction is for a used Kennametal Kub coolant thru indexable drill(see above for specs) It's in good lightly used condition. There are two carbide inserts installed(that look unused) and there is a pack with(7) Ingersoll inserts included. Get it while I've got it! FREE PRIORITY SHIPPING ALWAYS INCLUDED(Items usually ship out the same day! CHECK OUT MY OTHER END MILLS AND INSERTS FOR SOME OF THE BEST PRICES(AND SERVICE) ON EBAY!
|
|
|
4 lbs 13 oz. Solid Carbide Scrap Lot Clean End Mills Inserts
14 lbs 13 ounces Solid Carbide Scrap cutter inserts and broken/dull endmills. 3 day auction. Paypal only due within 48hrs of the end of the auction. If you have any questions feel free to contact me. THANKS!
|
|
|
CARBOLOY Indexable Carbide 1" End Mill with (2) Carbide Inserts, 1" Shnk, # R217
CARBOLOY Indexable Carbide 1" End Mill with(2) Carbide Inserts. The end mill has a 1" Shank and is marked"CARBOLOY. R217.69-01.00-3-16 848, Max RPM 25000 USA" The tool is 4" long. The inserts included look new and are marked T25M. This is an excellent tool ready for work. Visit our eBay store for more great values. Shipping and handling costs for this listing will be $6.95 within the U.S.A. We will ship internationally only if a cost. Or international shipping calculator, shows below. We will ship your order promptly. Sales within the state of Michigan will have sales tax added to the total. Thank you! 01140411096)
|
|
|
Dewalt DW735 Planer with Accu-Head Carbide Inserts
Normal 0 MicrosoftInternetExplorer4 Dewalt DW735 with a Accu-Head spiral cutter head installed. This head uses the new Accu-Head CARBIDE inserts. Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI. Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine through a 2.5" and 4" connection. Includes in-feed and out-feed tables. The machine works great. The Accu-Head cutter head does a much better job than the original had with 3 HSS blades. I recently upgraded to a Jet Jointer/Planer combo so the Dewalt is not used at all. Local pickup only.
|
|
|
Valenite MTENNS-16-4D 1"x1"x6" tool holder (USED) with 5 (NEW) carbide inserts
Tool holder is in good working condition with some tarnishing. The inserts are new and shipped fast.
|
|
|
USA Made DORIAN TOOL indexable carbide insert lathe toolholder w/inserts & more!
American Made Indexable insert lathe turning tool holder. Here is a Like New Lathe Turning tool from the famous American manufacturer. Dorian Tool. It was used sparingly. IT comes with 9 new inserts, three new seats& one new cam lock pin. 5/8" square shank, 4.50" OAL. A premium turning holder in like new condition ready to make chips! You will get exactly what you see in the pictures. I've included a catalog page with the part highlighted for more info.specs. If you have under a 5& 100% feedback score you MUST ask me permission to bid on this item. If not I will cancel your bid. I am sorry I have to do this. But there has been a rash of fake, fraudulent bidders on Ebay that run the bid up and not respond to your invoices. I am looking for honest Ebay members who are trying to keep Ebay an honest environment. ANY QUESTIONS ... morePLEASE ASK. I CHECK OFTEN. I am trying to be humble. But I have to state the obvious, a lot of my feedback says"better than desc ribed. I want the buyer to be fully happy with thier purchase.I guarantee you will not be disappointed. I have a 100% feedback rating and strive to keep it. Please bid with confidence. If you think I am being dishonest and Before leaving other than positive feedback I WILL MAKE IT RIGHT even if it means a refund. Ebay has instituted a paypal only policy. Please do not let this hinder you from bidding, contact me, we will work something out. I do not engage in selling outside of Ebay. So please don't ask. I will combine shipping to save you money. I've offered a few choices for shipping. Use the one that is most economical. ALL USA Shipping Methods are covered under the Ebay buyers insurance. Outside of USA? I can ship this to other countries too! ALL shipping methods are covered under eBay's buyer protection. I will be listing TONS of high quality Machinist/woodworking tools from other PREMIUM WELL KNOWN NAMES as well as steel and hardwood tool chest's. Please check back. Thank you very much for looking!
|
|
|
VALENITE VNCD 3/4" CARBIDE BORING BAR + INSERTS
VALENITE VNCD 3/4" CARBIDE BORING BAR + INSERTS Model No. VNCD 7460 GTE Shank: 3/4" OAL: 9 1/2" Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need something. Don't see it listed? Drop us a line@ RandC.auctions@gmail.com* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days*
|
|
|
KOMET 1" INCH INDEXABLE COOLANT THRU DRILL & (9) NEW CARBIDE INSERTS
This auction is for a used Komet Kub coolant thru indexable drill(see above for specs) This one is a little scraped up but should be fully functional. There are two used inserts installed and(9) new Komet inserts included in the pack. Get it while I've got it! FREE PRIORITY SHIPPING ALWAYS INCLUDED(Items usually ship out the same day! CHECK OUT MY OTHER END MILLS AND INSERTS FOR SOME OF THE BEST PRICES(AND SERVICE) ON EBAY!
|
|
|
KOMET 2-1/4" (2.250) INCH INDEXABLE COOLANT THRU DRILL & 2 USED CARBIDE INSERTS
This auction is for a used Komet coolant thru indexable drill(see above for specs) It's in very good lightly used condition. There are two used carbide inserts installed(two sides of each one look ok) Get it while I've got it! FREE PRIORITY SHIPPING ALWAYS INCLUDED(Items usually ship out the same day! CHECK OUT MY OTHER END MILLS AND INSERTS FOR SOME OF THE BEST PRICES(AND SERVICE) ON EBAY! lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-144e822cc64-0x109-
|
|
|
Carbide inserts. Used/broken/scrap 12.8lbs
Used carbide inserts. Some broken. 12.8lbs
|
|
|
Kennametal Carbide Inserts Holder 3/4" Lathe Tools Bits Machinist Gunsmith Lot
Ebay Base This auction is for a Kennametal carbide insert holder in 3/4" shank. This premium quality right-hand holder is Model № NVLCR-123B. This is for parts or repair. it is missing hold down clamp and screws. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
|
|
|
Lovejoy 8" face mill 28 carbide inserts 2.5" shell mill mount with issues
8" face mill. There are several issues on this cutter. But it still works fine. It has crashed in the"upper half" And shows damage. If some of the anvils needed to be removed, the damage would need to be addressed. See pic 3. However. The inserts can be replaced just fine. Most of the inserts are perfect. There is one chip I can see. Check out the last 4 pictures. Which show all the inserts. Sorry. We cannot ship internationally.
|
|
|
CUSTOM INDEXABLE LATHE TOOL HOLDER & (6) NEW CARBIDE INSERTS - 1-1/4" SHANK
This auction is for used custom modified lathe tool holder and(6) new carbide turning inserts(details shown in pictures) The tool holder is in very good shape(looks unused) FREE PRIORITY SHIPPING ALWAYS INCLUDED(Items usually ship out the same day! CHECK OUT MY OTHER END MILLS AND INSERTS FOR SOME OF THE BEST PRICES(AND SERVICE) ON EBAY!
|
|
|
Over 16 lbs Scrape carbide inserts and endmills
16.6 pounds of scrap carbide inserts n endmills.Sum can still b used,paypal only,15.00 shipping,lower 48 thanks n happy bidding
|
|
|
93 USED solid carbide inserts all Top Notch Size 3 Kennemetal & other brands
These top notch kennemetal and other brand inserts are used Top Notch Size 3 and some are chipped on the 2 cutting points. While others look new. All are the same size and shape. 1.8 lbs of actual carbide. PayPal Thank you.
|
|
|
Lot of 111 (2.0Lbs.) Model 230m Carbide inserts (2.0Lbs.)
You are bidding on a Lot of 111(2.0Lbs. Model 230m Carbide inserts(2.0Lbs. There are approximately 111 Carbide inserts weighing a total of 2.0 Lbs. These inserts are used. Please see photos to evaluate condition. BY BIDDING ON AN ITEM YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS: Payments& taxes: Payments on items with a sale price of $200 or less must be made by the end of the first business day following the close of the auction or sale. Payments for items with a sale price greater than $200 must be made by the end of the 4th business day following the close of the auction or sale. Deferred payment to facilitate combined shipping: If you plan to bid on multiple items during a calendar week and wish to combine shipping on multiple items. You may defer payment until the end of that calendar week so that shipping can be combined on ... morea single invoice. Please bear in mind that the combined shipment may not go out until the following Monday. Please send me an email telling me of your intentions. If other arrangements have not been made and payment has not been received according the above payment schedule. QuickSilverAuctions reserves the right to cancel the sale and re-list the item. This right, reserved by QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. State sales tax is collected if your ship-to address is in the state of Colorado. If your ship-to address is in Boulder County. Colorado, county sales tax will be collected. If you ship to a location in the city of Boulder. Colorado, City tax will be collected. SHIPPING: Local pickup is fine but by appointment only. Please send an email to make arrangements. Combined shipping for combined purchases is offered whenever possible. Shipping will always be combined to minimize shipping costs. S
|
|
|
Lot of 300 pieces (5.9 Lbs.) TP3500 1/2" Carbide diamond Lathe turning inserts
You are bidding on a Lot of 300 pieces(5.9 Lbs. TP3500 1/2" Carbide diamond Lathe turning inserts These inserts are used. Please see photos to get an idea of the condition of these inserts. some are chipped some are clean. some are clogged and can be cleaned. Most could be reground. Material Carbide Shape Diamond Inscribed Circle(Decimal Inch) 0.5 Inscribed Circle(Inch) 1/2" Thickness(Decimal Inch) 0.193 Hole Diameter(Decimal Inch) 0.203* BY BIDDING ON AN ITEM YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS: Payments& taxes: Payments on items with a sale price of $200 or less must be made by the end of the first business day following the close of the auction or sale. Payments for items with a sale price greater than $200 must be made by the end of the 4th business day following the close of the auction or sale. Deferred payment ... moreto facilitate combined shipping: If you plan to bid on multiple items during a calendar week and wish to combine shipping on multiple items. You may defer payment until the end of that calendar week so that shipping can be combined on a single invoice. Please bear in mind that the combined shipment may not go out until the following Monday. Please send me an email telling me of your intentions. If other arrangements have not been made and payment has not been received according the above payment schedule. QuickSilverAuctions reserves the right to cancel the sale and re-list the item. This right, reserved by QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. State sales tax is collected if your ship-to address is in the state of Colorado. If your ship-to address is in Boulder County. Colorado, county sales tax will be collected. If you ship to a location in the city of Boulder. Colorado, City tax will be collected. SH
|
|
|
Lot of 97 pieces rectangular, M90 Carbide Lathe turning inserts
You are bidding one Lot of 97 pieces rectangular. M90 Carbide Lathe turning inserts These inserts show varying degrees of wear.please see photos* BY BIDDING ON AN ITEM YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS: Payments& taxes: Payments on items with a sale price of $200 or less must be made by the end of the first business day following the close of the auction or sale. Payments for items with a sale price greater than $200 must be made by the end of the 4th business day following the close of the auction or sale. Deferred payment to facilitate combined shipping: If you plan to bid on multiple items during a calendar week and wish to combine shipping on multiple items. You may defer payment until the end of that calendar week so that shipping can be combined on a single invoice. Please bear in mind that the combined shipment may ... morenot go out until the following Monday. Please send me an email telling me of your intentions. If other arrangements have not been made and payment has not been received according the above payment schedule. QuickSilverAuctions reserves the right to cancel the sale and re-list the item. This right, reserved by QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. State sales tax is collected if your ship-to address is in the state of Colorado. If your ship-to address is in Boulder County. Colorado, county sales tax will be collected. If you ship to a location in the city of Boulder. Colorado, City tax will be collected. SHIPPING: Local pickup is fine but by appointment only. Please send an email to make arrangements. Combined shipping for combined purchases is offered whenever possible. Shipping will always be combined to minimize shipping costs. Shipping will only be combined within the same Calendar week. Within an
|
|
|
Approx. 135 pieces of mixed SMALL Carbide turning inserts
You are bidding one Approx. 135 pieces of mixed SMALL Carbide turning inserts These inserts have varying degrees of use. Please see photos. BY BIDDING ON AN ITEM YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS: Payments& taxes: Payments on items with a sale price of $200 or less must be made by the end of the first business day following the close of the auction or sale. Payments for items with a sale price greater than $200 must be made by the end of the 4th business day following the close of the auction or sale. Deferred payment to facilitate combined shipping: If you plan to bid on multiple items during a calendar week and wish to combine shipping on multiple items. You may defer payment until the end of that calendar week so that shipping can be combined on a single invoice. Please bear in mind that the combined shipment may not ... morego out until the following Monday. Please send me an email telling me of your intentions. If other arrangements have not been made and payment has not been received according the above payment schedule. QuickSilverAuctions reserves the right to cancel the sale and re-list the item. This right, reserved by QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. State sales tax is collected if your ship-to address is in the state of Colorado. If your ship-to address is in Boulder County. Colorado, county sales tax will be collected. If you ship to a location in the city of Boulder. Colorado, City tax will be collected. SHIPPING: Local pickup is fine but by appointment only. Please send an email to make arrangements. Combined shipping for combined purchases is offered whenever possible. Shipping will always be combined to minimize shipping costs. Shipping will only be combined within the same Calendar week. Within any calen
|
|
|
Lot of 70 pieces OF TP200 TRIANGULAR Carbide turning inserts
You are bidding one Lot of 70 pieces OF TP200 TRIANGULAR Carbide turning inserts Various degrees of use and sharpness. Please see photos* BY BIDDING ON AN ITEM YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS: Payments& taxes: Payments on items with a sale price of $200 or less must be made by the end of the first business day following the close of the auction or sale. Payments for items with a sale price greater than $200 must be made by the end of the 4th business day following the close of the auction or sale. Deferred payment to facilitate combined shipping: If you plan to bid on multiple items during a calendar week and wish to combine shipping on multiple items. You may defer payment until the end of that calendar week so that shipping can be combined on a single invoice. Please bear in mind that the combined shipment may not go ... moreout until the following Monday. Please send me an email telling me of your intentions. If other arrangements have not been made and payment has not been received according the above payment schedule. QuickSilverAuctions reserves the right to cancel the sale and re-list the item. This right, reserved by QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. State sales tax is collected if your ship-to address is in the state of Colorado. If your ship-to address is in Boulder County. Colorado, county sales tax will be collected. If you ship to a location in the city of Boulder. Colorado, City tax will be collected. SHIPPING: Local pickup is fine but by appointment only. Please send an email to make arrangements. Combined shipping for combined purchases is offered whenever possible. Shipping will always be combined to minimize shipping costs. Shipping will only be combined within the same Calendar week. Within any calendar
|
|
|
Lot of 40 pieces TP35 Carbide TRIANGULAR-shaped Lathe turning inserts
You are bidding one Lot of 40 pieces TP35 Carbide TRIANGULAR-shaped Lathe turning inserts Varied degree of use please see images-photos* BY BIDDING ON AN ITEM YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS: Payments& taxes: Payments on items with a sale price of $200 or less must be made by the end of the first business day following the close of the auction or sale. Payments for items with a sale price greater than $200 must be made by the end of the 4th business day following the close of the auction or sale. Deferred payment to facilitate combined shipping: If you plan to bid on multiple items during a calendar week and wish to combine shipping on multiple items. You may defer payment until the end of that calendar week so that shipping can be combined on a single invoice. Please bear in mind that the combined shipment may not go ... moreout until the following Monday. Please send me an email telling me of your intentions. If other arrangements have not been made and payment has not been received according the above payment schedule. QuickSilverAuctions reserves the right to cancel the sale and re-list the item. This right, reserved by QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. State sales tax is collected if your ship-to address is in the state of Colorado. If your ship-to address is in Boulder County. Colorado, county sales tax will be collected. If you ship to a location in the city of Boulder. Colorado, City tax will be collected. SHIPPING: Local pickup is fine but by appointment only. Please send an email to make arrangements. Combined shipping for combined purchases is offered whenever possible. Shipping will always be combined to minimize shipping costs. Shipping will only be combined within the same Calendar week. Within any calendar
|
|
|
Lot of 110 pieces (about 1.2 lbs.) of KC130 Triangular Carbide turning inserts
You are bidding one Lot of 110 pieces(about 1.2 lbs. of KC130 Triangular Carbide turning inserts These inserts are lightly used and still have a lot of life left in them 5/8" SIDED EQUILATERAL TRIANGLE* BY BIDDING ON AN ITEM YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS: Payments& taxes: Payments on items with a sale price of $200 or less must be made by the end of the first business day following the close of the auction or sale. Payments for items with a sale price greater than $200 must be made by the end of the 4th business day following the close of the auction or sale. Deferred payment to facilitate combined shipping: If you plan to bid on multiple items during a calendar week and wish to combine shipping on multiple items. You may defer payment until the end of that calendar week so that shipping can be combined on a single ... moreinvoice. Please bear in mind that the combined shipment may not go out until the following Monday. Please send me an email telling me of your intentions. If other arrangements have not been made and payment has not been received according the above payment schedule. QuickSilverAuctions reserves the right to cancel the sale and re-list the item. This right, reserved by QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. State sales tax is collected if your ship-to address is in the state of Colorado. If your ship-to address is in Boulder County. Colorado, county sales tax will be collected. If you ship to a location in the city of Boulder. Colorado, City tax will be collected. SHIPPING: Local pickup is fine but by appointment only. Please send an email to make arrangements. Combined shipping for combined purchases is offered whenever possible. Shipping will always be combined to minimize shipping costs. Shipping will
|
|
|
Lot of approximately 190 pieces (1.5lbs.) Misc shaped Carbide turning inserts
You are bidding one Lot of approximately 190 pieces(1.5lbs. Misc shaped Carbide turning inserts This is a wide variety of miscilanious inserts of my types. The condition of these inserts varies. Some have good cutitng point. Some are dull, some are clogged and some are chipped. Please see photos* BY BIDDING ON AN ITEM YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS: Payments& taxes: Payments on items with a sale price of $200 or less must be made by the end of the first business day following the close of the auction or sale. Payments for items with a sale price greater than $200 must be made by the end of the 4th business day following the close of the auction or sale. Deferred payment to facilitate combined shipping: If you plan to bid on multiple items during a calendar week and wish to combine shipping on multiple items. You may defer ... morepayment until the end of that calendar week so that shipping can be combined on a single invoice. Please bear in mind that the combined shipment may not go out until the following Monday. Please send me an email telling me of your intentions. If other arrangements have not been made and payment has not been received according the above payment schedule. QuickSilverAuctions reserves the right to cancel the sale and re-list the item. This right, reserved by QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. State sales tax is collected if your ship-to address is in the state of Colorado. If your ship-to address is in Boulder County. Colorado, county sales tax will be collected. If you ship to a location in the city of Boulder. Colorado, City tax will be collected. SHIPPING: Local pickup is fine but by appointment only. Please send an email to make arrangements. Combined shipping for combined purchases is offered
|
|
|
Lot of 95 pieces 635/328 Carbide Lathe turning inserts
Thise inserts are used but still have a lot of life left in them Product Description First choice for the parting of bars.Hard materials and tough applications A positive rake.Single cavity with negative land and shoulders,provides extra cutting-edge strength Medium-to-high feed First choice for soft materials.Parting of tubes,small diameters and thin-walled parts Cutting edge with positive rake General application on low carbon steel.Alloy steel,austenitic stainless steel Low-to-medium feed Where insert# states the suffix D.The number preceding the D is the lead angle Specifications, Unit of Measure, each, Country of Origin, ISRAEL, Shipping Restrictions, None, Brand, ISCAR, Description, ISCAR Carbide Inserts For SGFH& SGTF Toolholders- Grade: IC-328 INSERT CUTTING WIDTH: 0.118" Tool Material: Finish/Coating: PVD Coated R=Radius: ... more0.010" Insert# GFN 3J, Grade, IC-328, Radius R, 0.010" Coated, Yes, ANSI, C3-C2, Designation, GFN 3J, Finish Coating, PVD Coated, Insert Cutting Width, 0.118" Insert Type, J-Type, Recommended Application, Roughing.Low Speed,High Feed,High Resistance To Shock, Tool Material, Carbide, Workpiece Material, Alloy Steel.Aluminum Alloys,Cast Steel,Copper,Exotic, BY BIDDING ON AN ITEM YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS: Payments& taxes: Payments on items with a sale price of $200 or less must be made by the end of the first business day following the close of the auction or sale. Payments for items with a sale price greater than $200 must be made by the end of the 4th business day following the close of the auction or sale. Deferred payment to facilitate combined shipping: If you plan to bid on multiple items during a calendar week and wish to combine shipping on multiple items. You may defer payment until the end of that calendar week so that shipping can be combined on a single invoice. Please bear in mind that the combined shipment may not go out until t
|
|
|
Lot of 37 pieces VC90 .40" isosceles triangular Carbide Lathe turning inserts
Various degrees of wear Please see photos* BY BIDDING ON AN ITEM YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS: Payments& taxes: Payments on items with a sale price of $200 or less must be made by the end of the first business day following the close of the auction or sale. Payments for items with a sale price greater than $200 must be made by the end of the 4th business day following the close of the auction or sale. Deferred payment to facilitate combined shipping: If you plan to bid on multiple items during a calendar week and wish to combine shipping on multiple items. You may defer payment until the end of that calendar week so that shipping can be combined on a single invoice. Please bear in mind that the combined shipment may not go out until the following Monday. Please send me an email telling me of your intentions. If other ... morearrangements have not been made and payment has not been received according the above payment schedule. QuickSilverAuctions reserves the right to cancel the sale and re-list the item. This right, reserved by QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. QuickSilverAuctions, in no way relieves the purchaser of his obligation to make payment in good faith. State sales tax is collected if your ship-to address is in the state of Colorado. If your ship-to address is in Boulder County. Colorado, county sales tax will be collected. If you ship to a location in the city of Boulder. Colorado, City tax will be collected. SHIPPING: Local pickup is fine but by appointment only. Please send an email to make arrangements. Combined shipping for combined purchases is offered whenever possible. Shipping will always be combined to minimize shipping costs. Shipping will only be combined within the same Calendar week. Within any calendar week you may defer payment and request that a shipment be delayed and combined with others. We
|
|