Shank Tec Hss Morse Mts Hss Milling Slitting Drills Drillbits Hss Morse Mts 2 Mts 3 Shank Od Spiral Flutes 1 Mts 2 Machine Round Shank Reamer Straight Flutes Reamer Spiral Flutes Reduced Shank Od Die Button Hss Hand Tap 2 Split Die Button Screw Shank 16 Tpi Bsw 1 Bsp 1 Hss Morse Mts 4 Drill Parallel Die Nut Drill Drillbits Hand Tap Bsp Hss Machine Tap Unf Hand Tap Unc Flutes 7 Hand Tap Bsw Hss Milling Hss Morse Mts 3 Drill Drillbits Machine Shank Wt 1 4 Screw Hss-Co Chucking Tpi 14 3 Flutes Helical Flutes Shank Tap Tap Bsf Quality Hss Split Button Die Reduced Shank Od 1 2 Annular Cutter 1 4 Tpi Annular Magnetic Drill 1 2 Tpi Slitting Saw Hss Mts Morse 1 Drill Drillbits Morse Mts 3 Drill Drillbits 1 Parallel Reamer Spiral Flutes 1 Slotted Boring 16 X 1 1604 2 Flutes 4 Flutes 4 X 1 60 Degree Cutter 60 Degree End Mill 8 X 1 Acme Inserts Annular Cutter Set Apkt Ball End Mill Set Bench Grinder Wheel Boring Id Burr Burr Set Carbide Carbide Burr Carbide Drill Carbide End Mill Lot Carbide Insert Holder Ccmt 21.51 Center Drill Center Punch Chucking Reamer Cnmg Cnmg 432 Cnmg 643 Cohss End Milling Cohss End Milling Endmill 4 Flutes Coolant Corner Rounding End Mill Counterbore Set Countersink Countersink 82 Cut Off Wheels Cutoff Blade Cutter 3 Cutter Saw 2 Deburring Deburring Tool Diamond Grinding Wheel Drill Bit Emuge End Mill Lot End Mill Set Engraving Cutter Flutes 1 Fly Cutter Gleason Grinding Wheel Hand Reamer Hand Tap Horizontal Band Saw Horizontal Mill Cutters Hougen Hougen Cutters Hss Involute Gear Milling Cutter Hss Milling Slitting Slotted Cutter Indexable Indexable End Mill Iscar Dgn Iscar Drill Kennametal Keyseat Cutter Lathe Cutting Bits Lathe Threading Tool Lathe Tooling Lathe Tooling Lot Lngx Lot Micro 100 Milling Milling Cutter Milling Cutter Lot Mts 2 Drill Drillbits Niagara End Mill Od 1 Od 2 Od 3 Osg Parting Blade Parting Tool Radius Cutter Reamers Roloc Rotabroach Rotary File Roughing End Mill Sandvik Cnmg644 Scrap Carbide Sekr Shell Mill Slotted Boring Slotted Drill Solid Carbide Boring Bar Spot Drill Tap 1 Taper Inter Bottoming Tapping Taps Tcmt 21.51 Thread Mill Thread Shank Threading Tool Tool Tool Bits Tpg Tpg 222 Tpg 322 Vbgt Wcmx Woodruff Woodruff Cutter Wt 1 Z Carb Counter Bore Wnmg Hss Hand Parallel Reamer Spiral Flutes Ball End Mill Osborn Nachi Carbide Inserts Hss Morse Mts 4 Drill Drillbits Carbide Endmill Dovetail Cutter Lathe Cutter Die Handle
 In 
 
Categories
Order by: 
Available to: 
Price: 
 - 
This site contains affiliate links for which I may be compensated
5PCS 3/8" Lathe Indexable Carbide Insert + Turning Tooling Bit Holder w/ Wrench
$
26.48
Buy It Now
Free Shipping
Condition: New
Location: Whippany, United States
Mini Turning Tool holders with 3/8" Shank, featuring 5 tool holders - AL, AR, BL, BR, and E - along with 5 TCMT C-6 Inserts, providing versatility for ... morevarious applications. Featuring a positive rake cutting angle and an integrated chip breaker groove, these tool holders are versatile, suitable for turning, cutting, facing, boring, and chamfering applications, making them an essential addition to your tool collection.
3/4" Lathe Internal Boring Bar Turning Tool Holder + Indexable Carbide Insert
$
42.75
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
It Is Usually Used for Threading, Turning, Cutting off, Slitting, Finishing, Facing, External Grooving, Etc. With Its High-quality Tungsten Steel and ... moreHard Alloy Steel Materials, This Set of Turning Tools Provides Superior Quality, Such As High Impact Resistance, Low Friction Coefficient, and Sharp and Smooth Cutting.
45° Holder + SNMG432 SNMG120408 Carbide Inserts MSDNN1616H12 Lathe Turning Tool
$
14.99
Buy It Now
Free Shipping
Condition: New
Location: China
Model: MSDNN1616H12. 1PCS MSDNN1616H12. wrench: T15. 1PCS Wrench. these are Suitable for machining Steel parts/stainless steel /cast iron. Cutting direction: ... moreN. 1PCS SNMG1204 08. screw: CTM517 / 6X25.
KOMET ABS 50 DRILL 1.156" INDEXABLE CARBIDE INSERT DRILLING DRILL HOLDER TOOL
$
99.75
Buy It Now
Free Shipping
Condition: Used
Location: Kingman, United States
MODEL #ABS 50 DRILL W2924 / 1.156 / 3.468 R.
1/2" Lathe Turning Tool Holder SCACR1212H09+10PCS CCMT32.51 Carbide Insert Tool
$
24.94
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
1/2"/12mm Shank Indexable Turning Tool Insert Holder Set 2pcs SCACR1212H09 SCACL1212H09 Metal Lathe Cutting Tools with 10pcs CCMT32.51 CCMT09T304 Indexable ... moreCarbide Turning Insert turning insert Description For stubborn and hard materials, we must use a more secure turning insert for cutting. This lathe toolholder has been refined through multiple production processes. Its simple construction explains its superior qualities such as high impact resistance, low coefficient of friction, sharpness and smooth cutting. We do not hesitate to provide 10 high-quality and sharp turning inserts to ensure your long-term use. Key Features Selected Material: The shank and turning insert are made of high-strength high-speed steel and tungsten steel respectively, which are durable, sturdy, sta.
DESKAR 100P RPMT10T3MOE-JS LF6018 Milling Carbide Insert Milling Tool For EMR4R
$
81.90
Buy It Now
$5.90 Shipping
Condition: New
Location: China
Model: RPMT10T3MOE-JS LF6018. ModelRPMT10T3MOE-JS LF6018. effective products. Insert TypeMilling Insert. LF9008 is suitable for finishing and semi-finishing ... moreof carbon steel and alloy steel, and its wear resistance is better than that of 9018.
10pcs RPMT10T3MOE-JS Carbide Inserts Milling Turning FOR Tool Holder SRDPN R5
$
7.90
Buy It Now
Free Shipping
Condition: New
Location: China
It is suitable for processing mild steel materials such as soft steel. A low hardness iron. Have the ability to present the best products to everyone ... moreat the lowest. Because we are factory direct sales.
NEW 5PCS KENNAMETAL USA CUSTOM #3 TOP NOTCH CARBIDE GROOVING INSERT GRADE KC850
$
22.99
Buy It Now
Free Shipping
Condition: New
Location: Rochester, United States
STEEL GRADE KC850 CVD COATED. NOT BEEN DIGITIZED! THEY ARE A DOUBLE END LEFT HAND INSERT AND ARE CVD COATED. THEY WILL FIT IN ANY TOP NOTCH #3 SIZE INSERT ... moreSEAT HOLDER.
End Mill Holder Roughing End Mill Indexable End Mill 2 Flute 10mm JDMT070204R
$
47.70
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
End Mill Holder Roughing End Mill Indexable End Mill 2 Flute 10mm JDMT070204R For milling process, small milling cutter, replaceable inserts, economical. ... moreMilling cutter blade:Made of Japanese Hitachi carbide with surface coating treatment. Can process carbon steel, stainless steel, cast iron. Items include 10-C10-120L-2T 1PCS JP4020 JDMT070204R 10PCS.
10 pcs Sandvik Mill Cutter Carbide Inserts 432-KR SCMT 12 04 08-KR Grade 3025
$
24.95
Buy It Now
Free Shipping
Condition: New – Open box
Location: Grand Rapids, United States
SCMT 432-KR. indexable cutter tool holder inserts. This is for Qty.10 New tin coated inserts per. Grade KR3025.
TNMG160404 R-VF TNMG331 Carbide insert Lathe turning insert for stainless steel
$
20.30
Buy It Now
$5.00 Shipping
Condition: New
Location: China
Model: TNMG160404 R-VF BP1025. DGN ( grooving cutting). inside grooving cutting tool. outside grooving cutting tool. Applicable holder type :Lathe turning ... moreholder / Cutting tool. for steel stainless iron.
5Pc VNMG160404 insert+MVVNN 1616K16 Indexable Lathe External Turning Tool Holder
$
16.87
Buy It Now
$5.20 Shipping
Condition: New
Location: China
Modei:MVVNN 1616K16. Applicable insert:VNMG16. Cutting direction:Right hand.
Indexable Turning Threading Carbide Threading Insert 6 Flute 60 Degree 1.75-3.0
$
59.80
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Indexable Turning Threading Carbide Threading Insert 6 Flute 60 Degree 1.75-3.0 Double-sided design with 6 cutting edges. For lathe internal thread tools. ... moreAngle is 60 degrees, pitch is 1.75-3.0 The toolholder is made of spring steel heat treatment, which is shock resistant and durable. not easily deformed. Matched with 20mmX20mm, square tool holder. Easy to clamping and installation. The insert is made of German carbide. Surface coating treatment, 6 cutting edges Improves thread processing efficiency. Cost saving. Inserts can machine steel, stainless steel, nickel alloy, titanium alloy. Item includes SUR0012M16U 1pcs Tnmg160402-G60 10pcs 20X20-12 1PCS.
Lathe Internal Threading Boring Bar Indexable Threading Inserts 29° 22IR4ACME
$
115.20
Buy It Now
Free Shipping
Condition: New
Location: China
Lathe Internal Threading Boring Bar with Indexable Threading Inserts 29° 22IR4ACME 10PCS Internal threaded boring bar turning tool for lathes. The shanks ... moreare made of tool steel and are heat treated. Shank diameter 20 mm. Blades are made of cemented carbide 5-axis tool grinding for machining thread angles with high precision and sharp cutting edges Special German coating on the surface. Thread angle of 29 degrees Improve the life of inserts, high temperature resistance, not easy to wear For machining carbon steel, stainless steel, cast iron, Products include SNR0020R22 1PCS 22IR4ACME 10PCS.
SANDVIK, PSKNR 1616H 09 TOOLHOLDER w/ SNMG 322-QM 4225 CARBIDE INSERT B549
$
195.00
Buy It Now
$3.50 Shipping
Condition: Used
Location: Thompson, United States
SNMG 322-QM 4225. 9 PIECES of SANDVIK. 16mm SQUARE TOOL HOLDER.
Indexable Threading Boring Anti-Vibration Knife Holder 10pcs 16IRAG60 Carbide
$
85.50
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Lathe Threading Boring Bar Internal Indexable Threading SNR0013N16 16IRAG 10PCS Tool shank. 13mm shank, total length 160mm. The shanks are made of high ... morequality high-speed tool steel, CNC-finished after vacuum heat treatment, which improves the anti-vibration effect of the shanks and effectively increases the turning life of the threaded inserts. Inserts. carbide threaded inserts, carbide coated. Angle 60degrees, AG60-0.5-3.0 Threaded inserts are made of high-end German carbide. The surface is coated with composite nano-coating technology, thus making the blade more resistant to high temperature and wear. Can process carbon steel, stainless steel, cast iron, and alloy steel Items include HNR0013N16 1PCS 3IRMAG60 10PCS.
NEW 1-1/4 INGERSOLL A16T-SVUNR-2.53 INDEXABLE CARBIDE INSERT BORING HOLDER TOOL
$
99.75
Buy It Now
Free Shipping
Condition: New
Location: Kingman, United States
MANUFACTURER INGERSOLL.
Iscar Thead Mill Carbide Mtsr0375h12
$
100.00
3d 11h 23m 34s
0 bids
$12.95 Shipping
Condition: Used
Location: Sheldon, United States
1pc Iscar Mtsr0375h12 holder. I only used to mill one thread. 1pc 3/8 diameter 6 inches long carbide thread mill bar. I believe this was an Iscar brand ... morebut not 100% sure. It takes a 14mm long insert. There is a 24 pitch insert in it with minimum use. 10pcs 18 NPTF inserts 8 are new 2pcs have made a thread or two.
DESKAR 100P RPMT1003MO-TT LF6018 Milling Carbide Insert Milling Tool For EMR4R
$
81.90
Buy It Now
$5.90 Shipping
Condition: New
Location: China
Model: RPMT1003MO-TT LF6018. ModelRPMT0100MO-TT LF6018. effective products. Insert TypeMilling Insert. LF9008 is suitable for finishing and semi-finishing ... moreof carbon steel and alloy steel, and its wear resistance is better than that of 9018.
TNMG331 CBN / TNMG160404 CBN-6 Hardened steel Insert made of boron nitride MTJNR
$
10.90
Buy It Now
$4.90 Shipping
Condition: New
Location: China
Thermal conductivity: 200-300. DGN ( grooving cutting). SP200/SP250/SP300/SP400/SP500. 0-10mm 0.01mm. for aluminum. 16ER/16IR/11ER/11IR/22ER/22IR. Event ... moreProducts. High Quality Product Zone.
STGCR 1212H11 12x100mm Lathe Indexable Turn Tool Holder For TCMT11 TCGT11 insert
$
7.60
Buy It Now
$3.50 Shipping
Condition: New
Location: China
Model: STGCR 1212H11. Applicable blade:TCMT11 TCGT11（not include）. 1PCS STGCR 1212H11. 1PCS Wrench. Cutting angle:91°. We will not cheat any of our. Material: ... moreCarbon Steel. ▲Mid-end products, higher cost performance, lower price, suitable for small batch processing.
TTER2525-3T20 Lathe Grooving Turning Tool Holder+ 5PC TDC3 carbide insert
$
23.00
Buy It Now
$9.30 Shipping
Condition: New
Location: China
● Applicable insert:3mm TDC3. ● 5PC TDC3. ● Color: as picture shows.
5PC VNMG160408 VNMG332 carbide insert +MVJNR2525M16 right hand lathe tool holder
$
28.90
Buy It Now
$5.20 Shipping
Condition: New
Location: China
Model： MVJNR2525M16. ● 1pc MVJNR2525M16. ● Model: VNMG160408. ● 5PCS VNMG160408. Clamp； HL2414. INSERT; VNMG16. ● Blade type:Turning insert. ● Used for ... moreprocessing:Steel ,stainless steel ,cast iron.
1-13/32 Komet KUB Carbide Indexable Drill Bit Inserts Cutter Tool Holder 1.406"
$
72.50
Buy It Now
Free Shipping
Condition: Used
Location: Grand Rapids, United States
Indexable trigon insert drill. Shank size is 1.25" x 2.5" Long with flats. This drill looks to be in good shape yet. Coolant fed.
Internal Threading Boring Bar IR16 Internal Indexable Threading 16IRAG60 Carbide
$
90.25
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Internal Threading Boring Bar IR16 Internal Indexable Threading 16IRAG60 Carbide MMT16IRAG60-S Tool shank. 13mm shank, total length 160mm. The shanks ... moreare made of high quality high-speed tool steel, CNC-finished after vacuum heat treatment, which improves the anti-vibration effect of the shanks and effectively increases the turning life of the threaded inserts. Inserts. carbide threaded inserts, carbide coated. Angle 60degrees, AG60-0.5-3.0 Threaded inserts are made of high-end German carbide. The surface is coated with composite nano-coating technology, thus making the blade more resistant to high temperature and wear. Can process carbon steel, stainless steel, cast iron, and alloy steel Items include HNR0013N16 1PCS MMT16IRAG60-S10PCS.
SER1616H16 Lathe Turning Tool Holder+10Pcs 16ER AG60 Threading Carbide Insert BE
$
21.82
Buy It Now
Free Shipping
Condition: New
Location: China
Model: SER1616H16. 1 x SER1616H16 holder. Cutting tools insert: 16ER AG60 EM35. 10 x 16ER AG60 insert. The application of blade: 16ER. For turning, cutting ... moretool having a cutting portion. Cutting tools is one of the most widely used tool.
Face Grooving Tool Lathe Indexable Grooving Inserts MGMN300 10PCS Width 3mm
$
76.00
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Lathe Grooving Tool Face Grooving Tool Facng Holder Groove Insert MGMN300 10PCS Width is 3mm. Minimum machining size 25mm, maximum machining size 140mm ... moreEffective cutting depth 8mm. The tool shank is made of spring steel, heat-treated and finished. Shock resistant and durable, not easily deformed. Knife holder diameter 25mm The insert is made of carbide with surface coating. Can machine steel and stainless steel. Items include MFH320R-08-25140 1pcs MGMN300-M 10pcs.
DCMT070204-SM DCMT21.51 insert+ S08K-SDUCR07 8x125mm inside Turn Tool Boring Bar
$
9.50
Buy It Now
$2.60 Shipping
Condition: New
Location: China
1 x Wrench. Accept Insert:DCMT 070204-SM. General purpose cutting tools designed to be used for machining a variety of different sized holes.
Internal Threading Turning Tool Holder Carbide Threaded Insert 60 Degrees P6-10
$
195.50
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Vertical heavy duty internal thread turning tool holder. Tool shank diameter 40mm,total length 300mm Made of high hardness tool steel, vacuum heat treatment ... morefinishing. Shock-resistant and durable, not easy to deformation. Threaded inserts: German high-end carbide. 60 degree threaded inserts, high precision tool grinding processing. Surface titanium plating treatment, high temperature and wear resistance Angle 60 degrees, V60, pitch 6.0-10.0 Can process carbon steel, stainless steel, cast iron and alloy steel Items include SVNR0040T27-8 1PCS 27VNRV60 7PCS.
Lathe Internal Threading 29 Degree 6ACME Internal Threading Inserts 16VNR6ACME
$
163.76
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Lathe Internal Threading 29 Degree 6ACME Internal Threading Inserts 16VNR6ACME Tool holder. High quality spring steel, heat treated and finished. Anti-vibration ... moreand durable, not easy to deformation. .Threaded inserts are made of German carbide, ground by five-axis tool machine, with sharp edges. High-end coating on the surface, high temperature resistant. Wear-resistant. Can process carbon steel, stainless steel, cast iron heat treatment steel Items include SVNR0016N16H 1PCS 16VNR6ACME 14PCS.
1-1/2" DIJET Indexable tool holder Carbide Inserts Ball nose JCB-2150LTN JC355
$
6.44
Buy It Now
Free Shipping
Condition: New – Open box
Location: Grand Rapids, United States
Here we have 1 New insert per bid tin coated. The box says 1-1/2 on it so I am pretty sure these are for cutting a 1-1/2" Diameter. JCB2150LTN#3508-F ... moreJCB2150-LTN Grade 355 JC-355 Cutter Depending on how many you buy you may or may not receive the original packaging. This is not an actual photo but it is pretty much identical to the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I am just trying to save you some money on shipping. We do not offer partial refunds of overpaid shipping amounts if you pay before I can send you a total. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395 Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan you will
Lathe Grooving Holder Face Grooving Tool Carbide Turning Inserts MGMN300 10PCS
$
63.00
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Lathe Grooving Holder Face Grooving Tool Carbide Turning Inserts MGMN300 10PCS The maximum machining depth is about 3.5mm. It does not have a range limitation. ... moreThe tool holder is made of high quality tool steel, heat-treated and finished. Shock-resistant and durable, not easy to deform. The surface is nickel-plated to prevent rust and corrosion. The diameter of the tool holder is 16mm, the total length is 179mm. The blade is made of coated carbide, professional CNC tool grinding edge processing. Sharp cutting process. Bright surface. The width of the blade edge is 3mm. Can process steel, carbon steel, stainless steel, cast iron. Items Included SGIVFR16Q16 1PCS FC32L300-3.0 10PCS.
5 Pack 3/8" Lathe Indexable Carbide Insert + Turning Tooling Bit Holder Set New
$
23.31
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Key Features: For metalworking lathes Versatile and economical. Available in 5 shank sizes and styles. Available with 3 different radii. Positive rake ... morecutting and built-in chipbreaker groove. Three-sided tool, 120-degree angle, each offset as in the pic. Clearance angle of main cutting edge: 7degree Clearance angle of main cutting edge = 7degree; 3/8'' Square Shank, 5 Pcs/Set Indexable Turning Tool Set, TCMT21.51 STACR, STNCR, STECN, STDCR, STCCR, with 5 TCMT Inserts, 5 Trox Screws, 2 Torx Keys Versatile and economical. Screw Size: M2.5 x 6 Available with 3 different radii, 5 shank sizes and styles Positive rake cutting and built-in chipbreaker groove .
10pcs DCMT21.51 VP15TF Carbide Inserts/For Lathe Turning Tool Holder DCMT070204
$
7.69
Buy It Now
Free Shipping
Condition: New
Location: 金东区, China
Model: DCMT070204. Insert Grade: VP15TF. Suitable for: SDJCR/SDNCN/SDQCR Series Lathe Tool. Usage: for stainless steel.
7Pcs Carbide Indexable Turning Tool 1/2" Lathe Tool Bit Thread Insert+Holder Set
$
70.03
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Features?? Shank Size (H x W): 1/2" x 1/2". Black oxided smooth finish on each turning tool holder style and shank size. C6 TiN coated carbide inserts ... morewith positive rake cutting angle Cut very hard metals Built-in chip breaker, great for lathe turning operations with general purposes You can achieve the following turning operations?? Turning Step turning Taper turning Chamfer turning Contour turning Facing Grooving Parting External Threading Each set includes: 7 pcs indexable turning tool holder; 7 pcs TiN coated C6 carbide inserts; 7 pcs hex screws; 2 pcs hexagon keys; 1 fitted Aluminum case..
10PCS DCMT070204 CK251 Indexable Carbide Inserts For Lathe Turning Tool Holder
$
5.70
Buy It Now
$1.99 Shipping
Condition: New
Location: China
Model: DCMT070204. 10x DCMT070204 inserts. Mainly used for steel, stainless steel finishing and semi-finishing rough machining. Insert Grade: 251. Quantity: ... more10pcs/box. Machining Process: finishing and semi-finishing.
2pcs DCGT11T302 PCD INSERT for steel processing carbide bits used for Aluminum
$
10.80
Buy It Now
$0.99 Shipping
Condition: New
Location: China
2pcs DCGT11T302 PCD Used for steel processing.
LOT OF (3) ASSORTED LATHE INDEXABLE INSERT W/ CARBIDE INSERTS HOLDER TOOLS
$
99.00
Buy It Now
$15.00 Shipping
Condition: Used
Location: Buffalo, United States
LOT OF (3) ASSORTED LATHE INDEXABLE INSERT HOLDER TOOLS. 5 new Inserts for one holder 9 new Inserts for second holder 21 new Inserts for the third holder ... morePlease see pics for details Thanks for looking
4Pcs Turning Tooling Bit Holder Set+10Pcs Lathe Indexable Carbide Insert
$
29.26
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Lathe Accessories. Twist Drill Bit. Thread Repair Kit. Jig Saw Blade & Reciprocating. Diamond Drill Bit. 4 x Wrench. HSS End Mills. Chainsaw Part.
Carbide Indexable Turning Tool 1/2" 7pcs Lathe Tool Bit Set Thread Insert+Holder
$
64.43
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Features?? Shank Size (H x W): 1/2" x 1/2". Black oxided smooth finish on each turning tool holder style and shank size. C6 TiN coated carbide inserts ... morewith positive rake cutting angle Cut very hard metals Built-in chip breaker, great for lathe turning operations with general purposes You can achieve the following turning operations?? Turning Step turning Taper turning Chamfer turning Contour turning Facing Grooving Parting External Threading Each set includes: 7 pcs indexable turning tool holder; 7 pcs TiN coated C6 carbide inserts; 7 pcs hex screws; 2 pcs hexagon keys; 1 fitted Aluminum case..
Internal Threading Boring Threading Turning Insert German CPT 55 Degrees 16IRA55
$
83.70
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Internal Indexable Threading Boring Bar With Threading Turning Insert 55 degree angle, 11IRA55 (0.5-1.5). Small internal turning tool holder 55 degree ... moreGerman CPT hard threaded inserts Used for lathe internal thread turning tool holder. The tool holder is made of spring steel. The insert is made of German CPT carbide insert with 55 degree angle, 11IRA55(0.5-1.5). Can process steel, stainless steel, cast steel, high temperature alloy, cast iron. snr0012m11 1pcs 11IRA55BMA 10pcs.
Sandvik 32x25mm Indexable Tool Holder SRSCL 3225P RCMT Machinist Lathe 32mm
$
48.95
Buy It Now
$9.65 Shipping
Condition: Used
Location: Medina, United States
Id: SRSCL 3225P 16 10/14 B6. CoroTurn 107 Indexable Tool Holder From Sandvik in gently used Condition. Model No.SRSCL 3225P 16 with 32mm Height x 25mm ... moreWidth x 6.692" length. For use with RCMT 1606M0 and like inserts.
RPMT1204MO ZM1125 10PCS Carbide Inserts Milling Indexable tool holder EMR 6R
$
5.90
Buy It Now
$4.60 Shipping
Condition: New
Location: China
ZM1125: P M K.
CNC Carbide CNC Carbide Carbide Insert Cylindrical Tool Holder Round Insert New
$
23.81
Buy It Now
Free Shipping
Condition: New
Location: 金东区, China
Turning tool holder model: SRAPR1616H10. Tool holder material: alloy steel. Turning tool holder size: about 16 16 100mm. 1 SRAPR1616H10 turning tool holder. ... morePrecision grinding, manual hand inspection.
Carbide Indexable Turning Tool 5/8" 33pc Lathe Tool Bit Set Thread Insert&Holder
$
55.86
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Fine processing cannot be achieved without a good tool. It will be your powerful assistant for machining steel parts. You just need to insert the blade ... moreinto the holder to start using them. Turning Tool Holder Model: MWLNR1616H08, MCLNR1616H12, MTJNR1616H16.
Kennametal KGMER-2450N-NA2 Grooving Parting Lathe Tool Holder 1.5 x 1.5
$
35.00
Buy It Now
Free Shipping
Condition: New
Location: Frankfort, United States
Insert holder appears to be A3M501.5261, very hard to read though.
MODIFIED ISCAR TOOL HOLDER GHFGR-31.7-155-8. TAKES CARBIDE INSERT. 1" SH. {B817}
$
99.95
Buy It Now
Free Shipping
Condition: Used
Location: Mentor, United States
MODIFIED ISCAR TOOL HOLDER GHFGR-31.7-155-8. MODIFIED TO 1" SHANK. WHAT IS SHOWN IN MY PICTURE IS WHAT YOU ARE BUYING. TAKE A GOOD LOOK, YOU CAN READ ... moreMY LABEL. We describe our tooling as it is, we do not hide anything.
10pcs MGMN200-G 2mm Carbide Turning Inserts
$
11.99
Buy It Now
Free Shipping
Condition: New
Location: San Diego, United States
Cutting Width：2mm. 10 x MGMN200-G P3035. 30 - FR Envelope. Color: as picture shows. Cellphone Parts. Laptop Power Jack Board. Model: MGMN200-G P3035. ... moreServer Parts & HDD Caddy/Tray.
10P CNMG120408-CQ LF9018 CNC Lathe Tool Turning Insert Carbide Insert For Steel
$
13.99
Buy It Now
$5.90 Shipping
Condition: New
Location: China
Model: CNMG120408-CQ LF9018. LF9028 : LF9018 Insert For upgraded steel material interrupted Cutting. LF9011 : LF9018 LF9028 LF9118 steel Material, LF9118 ... moreInsert Material is Black Coating. We Have a large Number of New CNC lathe Tools With Complete Models: Threaded Inserts, Milling Inserts, Turning Inserts, Grooving Inserts, U Drill Inserts, Aluminum Inserts, Ceramic Inserts, Fine Boring Inserts, Suitable For: Steel, Stainless Steel, Aluminum, Cast iron, Ceramic, Various Inserts.
SHARS NG 2031R TIN GROOVING CARBIDE INSERT NEW !{
$
11.00
Buy It Now
$5.70 Shipping
Condition: New
Location: Saint Charles, United States
INDEXABLE INSERT CATEGORY Grooving Insert. Use for shallow grooving such as O-ring grooves in a wide variety of groove width. INSERT STYLE NG. Tin Coated ... moremulti layer coating. INSERT SIZE 2. INSERT GRADE C5.
5pcs SANDVIK 5322 110-06 New Carbide Insert Seats Shim Tool holder support rest
$
18.45
Buy It Now
Free Shipping
Condition: New – Open box
Location: Grand Rapids, United States
Indexable cutter tool holder insert rests. This is for Qty.5 New insert rests.
High quality Carbide Insert Shim Seat VNMG16 MV1603 VNGG16 shim MVJN holder shim
$
4.50
Buy It Now
$4.95 Shipping
Condition: New
Location: China
We are turning tool factory,low price. high quality.We have all models of cutter arbors.Because there are too many kinds of this. R365 series, etc.( if ... morethere are any quality. ).
LABLT 5 Pcs 1/2" Indexable Carbide Insert Turning Tooling Bit Holder Set
$
30.36
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specifics and features: Mini Turning Tool holders with 1/2'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts. Multiple cutting ... moresurfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder. Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering. Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion. 5pcs in a wooden case for safe storage,Carbide inserts. .
3/8 Lathe Internal Boring Bar Turning Tool Holder Gold Indexable Carbide-Insert
$
17.90
Buy It Now
Free Shipping
Condition: New
Location: China
A variety of product models and a complete range.
5PC VNMG160408 VNMG332 carbide insert+ MVJNR1616K16 16mm lathe turn tool holder
$
15.40
Buy It Now
$7.30 Shipping
Condition: New
Location: China
MVJNR1616K16 -----1PCS. Wrench, screwdriver；L2.0 + L3.0. Clamp； HL2414×2pcs. INSERT; VNMG1604× 5pcs. PIN: MCT513× 2pcs.
10pcs ADEH-431 AB Tools Shear Hog Carbide Insert .010 Radius
$
135.00
Buy It Now
Free Shipping
Condition: New
Location: Sherwood, United States
For AB Tools Shear Hog Insert Holders Only.
Lathe Turning Tool Holder Indexable Turning Threading For 30 Degrees 16VER3.0TR
$
80.75
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Lathe Turning Tool Holder Indexable Turning Threading For 30 Degrees 16VER3.0TR Tool holder: made of high quality tool steel by heat treatment and finishing. ... moreTool holder size is 16mm high X 16mm wide. Vertical press fit is stable and shock resistant. About threaded insert. Carbide, five-axis tool machine grinding, sharp edge. Surface is coated, high temperature resistant. Wear resistant. Can process steel and cast steel. Items Include SER1616H16-V 1PCS 16VER3.0TR 19PCS.
Carbide Indexable Turning Tool 1/2" 7 pc Lathe Tool Bit Set Thread Insert Holder
$
34.91
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
It is usually used for threading, turning, cutting off, slitting, finishing, facing, external grooving, etc. For stubborn and hard materials, we must ... moreuse a more secure turning insert for cutting. This lathe toolholder has been refined through multiple production processes.
SNR0008K11 Threading Turning Tool Holder Boring Bar+ 10* 11IR A60 Carbide Insert
$
14.20
Buy It Now
Free Shipping
Condition: New
Location: China
Indexable Thread Mill Insert Carbide Thread Milling 20P 11UIDC60 For SMT Holder
$
70.20
Buy It Now
$35.00 Shipping
Condition: New
Location: China
The blades are made of cemented carbide and machined on 5-axis tool grinding machines. The edge is sharp, the chip removal effect is very good, not easy ... moreto stain the knife. The surface is coated with nano-composite coating, which is resistant to high temperature and abrasion. Thread angle is 60 degrees, pitch range 2.0-4.0 For SMT milling tool holders Items include 11UIDC60 20PCS.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
 In 

Former Listings  
 
Carbide Part Cut-Off Insert Holder Lathe Tool Bit Machinist Gunsmith South Bend
Ebay Base This auction is for a Sandvik Coromant T-Max part cut off insert holder tool. This is for parts or repair. The insert has a chip in it. This has 1-15/64" shank x 3/32" thick Made in USA is our primary focus. Only the best of the best tools. That a Machinist can proud of, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
KAISER THINBIT INDEXABLE GROOVE 'N TURN CARBIDE INSERT TOOL HOLDER - #LGS38R-RB
Made by Kaiser Tool Company. Inc. This is an Indexable Carbide Insert Tool Holder in GREAT condition. Model# LGS38R-RB. Specifications: Shank: 3/8" x 3/8" Overall Length: 4-7/8" Comes exactly as shown in pictures.
45 Degree carbide insert holder, with 4 inserts (one insert not shown)
45 Degree single insert holder for spotting or milling. Three extra inserts. 1/2 shank. This is a very versital tool and will give you many years of great service!
VR/WESSON SBTL-12H 3/4" LATHE TOOL HOLDER CARBIDE INSERT TOOL
VR/WESSON SBTL-12H 3/4" LATHE TOOL HOLDER CARBIDE INSERT TOOL VR/WESSON CARBIDE INSERT 3/4" LATHE TOOL HOLDER SBTL-12H. We except paypal payments only. Buyers are asked to remit payment within 7 days of auction end. International buyers are responsible for paying applicable duties and/or taxes upon reciept of shipment. I will gladly refund the purchase price of the item less any shipping charges if I have misstated anything about the item in the discription. Please contact me before leaving feedback if there is any concerns or problems with the item once you recieved it. Contact us by clicking on the ask seller a question icon located on the top right side of this listing.
1"tall carbide insert holder and cut off insert blade Iscar self-grip, CNC lathe
All USED. Iscar blade for cut off inserts self grip, blade holder with hole that is now machined to 1" tall and about 1" wide and was used in cnc machine that used 1" holders. paypal in 2 days, thank you, unused shipping money will be refunded thru paypal
40 TAPER LYNDEX SHELL MILL HOLDER With 5" CARBIDE INSERT SHELL MILL and INSERTS
40 TAPER LYNDEX SHELL MILL HOLDER With 5" CARBIDE INSERT SHELL MILL and INSERTS Mill is in very good condition Comes with the following inserts(over $350 worth of inserts) 15 inserts- Kennametal SEAN43AFSN6LN 5 inserts- Kennametal SEAN43AFEN6LN 3 inserts- SECO SEKR1203AFN-E07-F15M di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-148aa01b8ad-0x10e-
VINTAGE CARBIDE INDEXABLE INSERT THREADING/GROOVING TOOL HOLDER 60 DEGREE POINT
60 Degree Pointed Carbide Tool Holder as shown in photos. Shaft measures about.80" thick x 1 1/4" high. Looks like someone ground the sides and removed the tool# I believe this is a Carboloy brand holder from the 1970's or 1980's. Overall Good condition but carbide seat and insert need changing. See my other machinist tools. FREE USA SHIPPING.
KAFW4 Carbide Insert Vedge Holder 12 Pcs.
KAFW4 Carbide Insert Vedge Holder 12 Pcs. For Questions Call John 314-398-7414 ALL ITEMS ARE SOLD AS IS. WHERE IS THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES Stock#6653-N
CARBIDE INSERT 1" LATHE THREADING TOOL HOLDER CLEVELAND USA OCTI CUT DER-100-6
very good used indexable carbide insert lathe tool- threading and grooving Cleveland Octi-Cut DER-100-6 shank is approx 1" T x 1" W x 6" L comes with assorted inserts and cartridges please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
SANDVIK INDEXABLE PARTING & GROOVING CARBIDE INSERT TOOL HOLDER - #R151.21-16-30
Made in the USA by Sandvik Coromant. This is an Indexable Parting& Grooving Carbide Insert Tool Holder in good condition. Holder shank has been milled down. See pictures. Model# R151.21-16-30. Specifications: Insert Width: 120" Blade Height: 1" Shank: 3/4" x 1" Overall Length: 4-7/8" Comes exactly as shown in pictures.
SANDVIK COROMANT INDEXABLE CARBIDE INSERT TOOL HOLDER - #TLSR-102D-S
Made by Sandvik Coromant. This is an Indexable Carbide Insert Tool Holder in good condition. Model# TLSR-102D-S. Specifications: Shank: 5/8" x 5/8" Overall Length: 6" Comes exactly as shown in pictures.
Round Carbide Insert Holder 3/4" Lathe Tool Bit Machinist Gunsmith South Bend
Ebay Base This auction is for a round carbide insert holder in 3/4" shank. The holder is Carboloy model №. RAR-12-3. This holder is in excellent condition. Comes with carbide Shim/Seat. The insert seat in the photo is NOT included. Only the seat. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
MANCHESTER INDEXABLE CARBIDE INSERT TOOL HOLDER - #TTPR10
Made by Manchester. This is an Indexable Carbide Insert Tool Holder in good condition. Model# TTPR10. Specifications: Shank: 10mm x 10mm. Overall Length: 4-3/4" Comes exactly as shown in pictures.
Valenite VHDDGA 4.8 38L Carbide Insert Holder
The holder is used but still in good working condition. Shipping international will be additional cost.
Threading Carbide insert tool holder with 26 inserts
You will get a tool holder in a box with 26 extra treading tool inserts. The tool holder is 3/4 by 3/4 by 5 inches long. The tool holder was used to thread steel and stainless steel. It works great.
HOLDER, .5" BORING / TURNING INDEXABLE carbide insert CARBOLOY TFR-8-2
Shank ½ x ½ x 4½OAL I haven't used it. But I will guarantee it and return postage. Just return it in a few days if you don't like it. I guarantee your satisfaction. Insurance IS included in US shipments. Foreign bidders. Please arrange international shipping before you bid. You can get an estimate at http:ircalc.usps.gov/ I'm happy with Paypal if you get the funds from your bank or Paypal balance and not from a credit card. I'm also selling various supplies and CAE software originally purchased for a prototype machine shop I used to operate in San Francisco. Just ask if you would like me to set up an auction for any of it. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-149333a6d4e-0x115-
Millstar Tool Holder For Carbide Insert CY-0375-4.0-0500
Millstar CY-0375-4.0-0500 Tool holder for Carbide Insert Thanks for looking
Kennametal Round Carbide Insert Turning Tool Holder Metal Lathe Machinist RKAN8P
Round toolholder by kennametal. Came from tool room surplus from closing mfg plant. Tool holder RKAN 8P with 1/2" shank. Takes insert rd-8P. Be sure to check out my other items for more great tooling finds.
Cat 40 tool holder Sandvik adjustable boring tool 26-30mm with carbide insert
Items as pictured. Cleaning off shelves in shop. Some items may be rusty(see picture) but fully functional. Buyer pays shipping cost. Will combine shipping. Fill up USPS flat rate box for under $10 total. Flat rate shipping cost to continental UPS only. Email for cost to other locations.
Great Lakes Carbide tool GLCT carbide insert holder - 130-05106-1000 3/4 shank
good quality carbide insert holder. Made in USA. Great Lakes Carbide Tool Mfg company high quality and accuracy. What you see on the picture that you will get!
Somma Tool Co. Circular Carbide Insert Cutoff Tool Holder
Somma Tool Co. Circular Carbide Insert Cutoff Tool Holder for#2 Brown& Sharpe Circular Tool Holder Somma#2-CIN Insert size 3/4 sq includes 1 insert
YUASA No. 250-302 QUICK CHANGE LATHE TOOL HOLDER & KAISER CARBIDE INSERT HLD *19
The too holding slot measures.7875" Comes with the Kaiser tool as shown in the photos. See my other auctions for other styles and a tool post. I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. Note: large items like tool chests cannot be combined for shipping. EASY RETURNS- You can return ANY tool if you are not happy with it. All tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will ... morebe happy to send you a quote to have your shipment insured& tracked. Visit my store to see other great deals! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
SECO Carboloy 1"x 3/4" Metal Lathe Tool Holder Machinist Carbide Insert Grooving
Actual item you will receive is pictured. Used lightly and from closing industrial mfg. Be sure to check out my other items for more tooling finds.
CARBIDE INSERT ENGINE LATHE or MILL 1" x 7 1/2" BORING BAR tool holder 1/4" hss
good used lathe or mill boring bar mfg unknown 1" dia x 7 1/2" long includes a 1/4" sq carbide insert bit and a 1/4" hss bit please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
TNMG 432 INDEXABLE CARBIDE INSERT 1 1/4" LATHE TURNING engine metal TOOL HOLDER
good carbide insert lathe tool holder mfg unknown. shank has been reduced so it will fit in a tool post holds TNMG 432 and TNMA 432 inserts shank approx.710" wide x 1 1/4" tall please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
DO ALL LATHE INDEXABLE CARBIDE INSERT HOLDER WITH INSERTS MTCNN-124
Do All indexable tool holder for lathe 3/4" square x 4.5" long. With inserts! Model MTCNN-124 Inserts TNMG Check photos for details ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14a1329781f-0x114-
Manchester Grooving Tool Holder 204-215 Metal Lathe Machinist Carbide Insert
Surplus from industrial mfg plant.
SANDVIK Model L12373 - HSK63 - 3" Carbide Insert Shell Mill Cutter & Tool Holder
GREAT DEAL! This auction is for a SANDVIK Model L12373- HSK63- 3" Carbide Insert Shell Mill Cutter& Tool Holder. This holder is used. But in good working condition. I have been it the machining/ tool& die business for over 30 years. Do to unforseen issues I am selling off all my tooling that I have accumulated over the past 35 years. Ask about many other tooling items- solid carbide boring bars, end mills, inserts, drills, taps, reamers, tool holders, boring heads, collets, ect. We ship via usps/ Pay Pal shipping. You will receive a notice from Pay Pal when your item ships& you will also receive a tracking number for you item PAYMENT: We gladly accept payment by Pay Pal. Please email us about other payment options. SHIPPING: We ship to USA mailing addresses only. No APO mailing addresses on this item) I will always make an ... moreeffort to ship the day after your payment is received. I ship all of my items via USPS with delivery confirmation. RETURN POLICY: We have a money back guarantee. If you are unhappy with any item you received in our auction. Return it(in the same condition it was shipped in) and we will refund your payment.
Kennametal DSSNR 124B square carbide turning insert tool holder South Bend
Kennametal carbide insert holder. Good used condition.
DEVLIEG MICROBORE 50FC-S100 FLASH CHANGE TOOL HOLDER W/CARBIDE INSERT *XLNT*
DEVLIEG MICROBORE 50FC-S100 FLASH CHANGE TOOL HOLDER W/INGERSOLL 65-21711 S 24103 CARBIDE INSERT EXCELLENT CONDITION PHOTO IS ACTUAL ITEM WEIGHT OF ITEM: 7.95 LBS DIMENSIONS OF ITEM: 7½" X 3½" FDH3D1A LMS WARRANTY All equipment comes with a 6 month warranty. Equipment is guaranteed to be received as described in the listing or a full refund will be given upon return. SHIPPING Most items will be shipped the next business day after payment has cleared. The listed shipping and handling charges are for the continental US and include all Packaging. Handling, and Insurance fees/costs for regular orders. If equipment is needed to be shipped the same day. Evenings, weekends, or holidays, an additional fee will be added and we must be contacted by phone or email/message. We recommend you contact us directly for all international ... moreor freight shipments. Feel free to contact us if you are purchasing multiple items to see if your purchase qualifies for shipping discounts. PAYMENT Payment can be made with Paypal. Credit Card, Cashier's Check, Company Check, Personal Check, or Wire Transfer. Company Checks, Personal Checks and Wire Transfers must clear before equipment will be shipped. COMPANY PROFILE Remancenter buys and sells industrial electronic equipment for use in the manufacturing world. Our desire is to have the lowest prices of any remanufacturing company on the world wide web. Our primary goal is to satisfy the customer while remaining a profitable growing business. CONTACT INFORMATION 336-394-4600(Office) 336-394-4603(Fax) 336-340-4552(Emergency) Email) On Oct-25-12 at 18:25:51 PDT. Seller added the following information:
Stelram CTEPL-123 triangle carbide turning insert tool holder South Bend
Stellram triangle carbide insert holder. Nearly used condition.
Sumitomo Carbide Insert Holder .975"
Sumitomo Carbide Insert Holder.975" EDS025N 1 1/4" ARBOR What ever you see in the pictures is what you get. No extras. Please Pay Right Away to assure speedy delivery. We do not guarantee in any shape or form the safety factors of any machinery. Tool, or equipment purchased. ALL ITEMS ARE SOLD AS IS– WHERE IS NO WARRANTIES ARE APPLIED! CA RESIDENTS 9.5% SALES TAX Thank You for your support. If you have any questions feel free to call or email whatever you see in the picture is what you get. All payments should be made within 48 hours of ending the sale. I BUY SELL OR TRADE
Sumitomo Carbide Insert Holder 1"
Sumitomo Carbide Insert Holder 1" 85980 1 1/4" ARBOR What ever you see in the pictures is what you get. No extras. Please Pay Right Away to assure speedy delivery. We do not guarantee in any shape or form the safety factors of any machinery. Tool, or equipment purchased. ALL ITEMS ARE SOLD AS IS– WHERE IS NO WARRANTIES ARE APPLIED! CA RESIDENTS 9.5% SALES TAX Thank You for your support. If you have any questions feel free to call or email whatever you see in the picture is what you get. All payments should be made within 48 hours of ending the sale. I BUY SELL OR TRADE
Used Lathe Tool Holder 1 1/4" VALENITE TP-TMR-20 Carbide Insert USA
Used 1 1/4" VALENITE TP-TMR-20 carbide insert tool holder for lathes. Appears to be in good usable condition. What you see in the pic is what you will receive. S/H will be $3.00. Will combine shipping! Thanks for looking!
Used Lathe Tool Holder 1" MVLNL-164 Carbide Insert USA
Used 1" MVLNL-164 carbide insert tool holder for lathes. Appears to be in good usable condition. What you see in the pic is what you will receive. S/H will be $3.00. Will combine shipping! Thanks for looking!
Sandvik TLSR-122B Carbide Insert Tool Holder [1 only]
Sandvik Coromant top clamping threading/grooving carbide insert holder. This holder is now surplus to me. Even though it is still in excellent shape, I'm going to sell it C/W one insert for cutting 60 degree threads.
Carboloy Carbide Insert Holder Lathe Tool Thread Machinist Gunsmith South Bend
Ebay Base This sale is for carbide insert holder lathe tool in 1-1/2" shank. This premium quality holder is model №.MTVOL-24-5 made in USA by Carboloy. The insert is used but still good. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can be proud of, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
TB-683RH Dawson Tool Holder Head Metal Lathe Carbide Insert Machinist Boring
See actual item pictured. Buy as many as you want of this item for no additional shipping(please request updated invoice before checkout)
1" Indexable Carbide Insert Lathe Tool Holder MRGNR 16 4C C1M
Pretty sure this have never been used but I don't know if the clamp was removed and lost or if it didn't have a clamp so listing it as used. I think it is a Greenleaf but it's hard to see the writing on the hologram.
1" CNC MACHINE TOOL HOLDER TOOLING takes ROUND CUTTER CARBIDE INSERT
CNC MACHINE CARBIDE TOOL HOLDER I AM UNSURE OF BRAND OR WHAT INSERT IT TAKES 1" x 1" Tool Holder 6" Long. AS SEEN IN PICTURES THE SIDES HAVE BEEN GROUND DOWN FOR MORE CLEARANCE.
ISCAR SRGOL 16-10 CNC MACHINE TOOL HOLDER TOOLING ROUND CUTTER CARBIDE INSERT
LEFTHAND ISCAR SRGOL 16-10 Israel CNC MACHINE CARBIDE TOOL HOLDER 1" x 1" Tool Holder 6" Long. Will need inserts and a insert spacer.
CARBIDE INSERT 1 1/2" END MILL milling tool holder SANDVIK RA390-038M32-17L
good used indexable carbide end mill SANDVIK RA390-038M32-17L 1 1/4" shank x 1 1/2" cutting dia holds R390-1704 inserts has edge wear but the inserts clamp tight 22700 rpm x thru coolant please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
Carbide insert Lathe Tool Bit Holder 4 Inserts CNC Or Conventional
You are bidding on a lathe tool and four new tin coated carbide inserts. The insert in the tool holder appears to be new also. The shank is 1" square and 6" in total length. The carbide brand is Mitsubishi also and carries the number WNMG432MA Japan made. This cutter has been used but shows no sign of damage. I will be listing several more tool holders the next few days and will be glad to combine on shipping.
Carbide insert tool holder assortment
This is an assortment of six carbide insert tool holders and two cements carbide tool holders. There is a Kendex# rkal8p and it uses rd8p inserts. The others are shop made by a machinist and take various inserts. The shanks are 1/2" x 1/2" 9/16" x 5/8" 5/8" x 5/8" and 7/8" x 7/8" etc. I will combine multiple purchases to save on shipping. Good luck and Happy bidding!
ISCAR INDEXABLE FACE GROOVING TOOL HOLDER SGFFA 30-R-3 W/ CARBIDE INSERT
Iscar Indexable Face Grooving Tool Holder Model SGFFA 30-R-3 1-1/4" Shank x 3-1/2" Long Includes Original Packaging. Wrench, New Solid Carbide Insert Style GFN 3J No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
ISCAR SGTHR 16 - 3 Self Grip Lathe Tool Holder With Carbide Insert
ISCAR SGTHR 16- 3 Self Grip Lathe Tool Holder With Carbide Insert As seen in pictures I guarantee all my sales. If I have missed something or the item is not as I described. Let me know within 5 days after you receive it and send it back to me in. The same condition you received it for a full refund. I AM LISTING A LARGE AMOUNT OF TOOLING THIS WEEK AT 99 cents AND WILL ALWAYS COMBINE LOTS FOR THE BEST FLAT RATE SHIPPING VALUE. I really appreciate your bids.
Kennametal DCLNR-124B carbide insert holder CNC lathe
Kennametal DCLNR-124B insert holder in nice shape. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14b4803be92-0xf6-
Iscar MWLNR 12-3W trigon tool holder CNC lathe turning for trigon carbide insert
Iscar MWLNR 12-3W trigon insert holder in nice shape. Powered by The free listing tool. List your items fast and easy and manage your active items.
SWLCL 082 Carbide Insert Turning Tool Holder by Kennametal 1/2" shank + 5 insert
GREAT DEAL! This auction is for a SWLCL-082 Carbide Insert Turning Tool Holder by Kennametal- 1/2" square shank 1/2" square shank + 5 new carbide inserts. Price: $67.77 ea. This holder is used. And is in like new condition. I have several inserts for this holder. If you are interested, let me know. I have been it the machining/ tool& die business for over 30 years. Do to unforeseen issues I am selling off all my tooling that I have accumulated over the past 35 years. Ask about many other tooling items- solid carbide boring bars, end mills, inserts, drills, taps, reamers, tool holders, boring heads, collets, ect. We ship via usps/ Pay Pal shipping. You will receive a notice from Pay Pal when your item ships& you will also receive a tracking number for you item.
KENNAMETAL INDEXABLE FACING LATHE TOOL HOLDER 1" SHANK CARBIDE INSERT TNMA 43
Thank You For Looking At Our Products Product Information: Kennametal Indexable Facing Lathe Tool Holder w/ Insert Made in USA Model No. DTFNL 164D Product Features& Specifications: Turning& Facing Tool Holder Shank Measures 1" x 6" Overall Length Includes Tool Flo Solid Carbide Insert Model TNMA 43 NG W.187 GP50 Product Code: 14122608 We will be happy to combine any purchases you make. Just let us know that you are interested in more than one item and we will let you know what the combined cost will be.
INDEXABLE CARBIDE INSERT LATHE TOOL HOLDER 1-1/4" x 4-5/8" long
INDEXABLE CARBIDE INSERT LATHE TOOL HOLDER 1-1/4" x 4-5/8" long
VALENITE INDEXABLE CARBIDE INSERT LATHE TOOL HOLDER 1" x 3-7/8" long
VALENITE INDEXABLE CARBIDE INSERT LATHE TOOL HOLDER 1" x 3-7/8" long CTFPL- 16- 3 C 4T9 TP-32 SSS-1 STBC-12-2
DNG 532 INDEXABLE CARBIDE INSERT 1 1/2" LATHE TOOL HOLDER KENNAMETAL DNG 532
good used carbide insert lathe tool holder Kennametal Kendex CNGR 86 holds DNG 532 inserts. will also hold dnma/ dnmg approx 1" W x 1 1/2" T x 8" long FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
Kennametal Turning Tool Holder DSDNN-854 Carbide Insert
Kennametal Turning Tool Holder a s pictured. Includes carbide insert. Listing several holders I have not used in months. Could have some rust from sitting around in drawer or on a shelf. Combined shipping cost- one $6 shipping& handling fee for all tool holders you buy that fit in the USPS flat rate box(usually 3 or 4)
INDEXABLE CARBIDE INSERT LATHE TOOL HOLDER 1 INCH SQUARE
1 lot of 23 tool holders 18- 1 inch square 2- 1 1/4 inch square 1- Antech A-998-R boring bar 1- 1 inch x 7/8 tall 1- 1 inch x 3/4 tall
ISCAR Carbide Insert Face Mill Cutter w/ Command # BT-30 CNC Tool Holder
This Auction is for: 1) ISCAR Carbide Insert Face Mill Cutter w/ Command# BT-30 CNC Tool Holder. ISCAR Cutter Model# HP-F90AN-D2.0-12-75-07. Command Tool Holder# B254-0750.
2 Seco Sweden 150.10-25-3 carbide insert bar holder toolmaker tool tools
you get what you see except for the $1.light use.in protetive cases.Connecticut buyer to pay sales tax.Handling $1 per Ebay item on combined orders only.on combined orders I charge actual shipping costs plus $1 handling per item. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
SANDVIK COROMANT SBTR-16M TOOL HOLDER FOR SNG 433 CARBIDE INSERT 1" x 1" x 6"
SANDVIK COROMANT SBTR-16M TOOL HOLDER FOR SNG 433 CARBIDE INSERT 1"x1"x6" SNG 433 Carbide included
HUGE LOT of CARBIDE INSERT TOOL HOLDER PARTS
TO ARNDTINC! WE ARE SELLERS WHO HAVE STARTED ANOTHER USERNAME TO SELL PARTICULAR ITEMS. OUR OTHER USERNAMES ARE"SKYNON" 1TO4" WE HAVE A COMBINED TOTAL OF OVER 30.000 POSITIVE FEEDBACKS, SO PLEASE BID ON OUR ITEMS WITH CONFIDENCE! THIS IS A HUGE LOT OF TOOL HOLDER PARTS BY VR/WESSON& OTHERS LOT OF SEVERAL HUNDRED PARTS THESE COME JUST AS PICTURED.THESE ARE NOT CARBIDE INSERETS INCLUDES PLASTIC ORGANIZERS: ONE WITH LID. OTHER TWO DO NOT.ONE HAS DAMAGE WE DO NOT KNOW ANY MORE THAN THE PICTURES STATE NICE PARTS. IF YOU CAN USE THEM! NO RESERVE! WE WILL HAVE SEVERAL AUCTIONS RUNNING WITH QUALITY NAME BRAND TOOLS FOR THE NEXT SEVERAL MONTHS. SO PLEASE CHECK THEM OUT! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14b7c16bfc5-0x116-
3/4" X 5" SQ SHANK PAFANA PER 0750K16 CARBIDE INSERT THREADING TOOL HOLDER
WOW! Straight from an Excellent Local MACHINE SHOP Estate comes this.PAFANA 3/4" X 5" SQUARE SHANK PER 0750K16 INSERT CUTTING TOOL HOLDER.Condition is Great Working order.Display is Great.See Photos.Please see ALL of the MACHINE SHOP Items from this Estate on our ebay sell site Now.Winning bidder pays shipping.ESTATE#02-2642
Tool Lot Metalworking Lathe Tool Insert Holder Carbide Inserts , Cobalt Steel
Used And New Lot Random Lot Lathe Cutoff Tools Indexable Insert Holders all Used. 1 Missing end clamp. Carbide Insert Indexable New Old Peen Hammer Head Used Small Bar of Cobalt Tool Steel Never Used Other Misc Items We will combine 2 Lot in a Small Flat Rate Box. Will not guarantee 3 lots will fit but will try. So 3-7 lots ship Medium Flat Rate 8 and up ship Large Flat rate.
Kennametal DSKNL-164C indexable carbide lathe tool holder insert FREE SHIP
Selling a Kennametal indexable tool holder for a lathe. The shank is 1x1" and the model number is DSKNL-164C. We have more tool holders by several different manufacturers. Take a look at our other listings for details. They can be sold in lots. If interested. COMES AS PICTURED Feel free to make us an offer. Thanks FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. WE CAN ALSO TAKE A CREDIT CARD OVER THE PHONE OR IN PERSON. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
Carboloy MTANL-16-4 indexable carbide lathe tool holder insert FREE SHIP
Selling a Carboloy indexable tool holder for a lathe. The shank is 1x3/4" and the model number is MTANL-16-4. We have more tool holders by several different manufacturers. Take a look at our other listings for details. They can be sold in lots. If interested. COMES AS PICTURED Feel free to make us an offer. Thanks FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. WE CAN ALSO TAKE A CREDIT CARD OVER THE PHONE OR IN PERSON. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
Sandvik Coromant SBPR-20 indexable carbide lathe tool holder insert FREE SHIP
Selling a Sandvik Coromant indexable tool holder for a lathe. The shank is 1 1/4x1 1/4" and the model number is SBPR-20. We have more tool holders by several different manufacturers. Take a look at our other listings for details. They can be sold in lots. If interested. COMES AS PICTURED Feel free to make us an offer. Thanks FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. WE CAN ALSO TAKE A CREDIT CARD OVER THE PHONE OR IN PERSON. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
Teledyne indexable carbide insert lathe tool holder MTANL-164 FREE SHIP
COMES AS PICTURED Selling a Teledyne indexable carbide tool holder for a lathe. The shank is 1x1" and the model# is MTANL-164. We have several of these tool holders by several different manufacturers. Take a look at our other listings for the details. They can be sold in lots. If interested. FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14b99c27452-0x117-
SPG 422 CARBIDE INSERT 1/2" LATHE TURNING TOOL HOLDER KENNAMETAL KSDN-124C
good used indexable carbide insert lathe tool Kennametal USA KSDN 124C shank is approx 1/2"T x 3/4" W x 3 1/2" holds SPG 422 insert please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
GTN-3 CARBIDE INSERT LATHE PARTING & GROOVING TOOL HOLDER 3/8" SHANK
very good used carbide insert lathe tool holder- parting and grooving mfg unknown- holds GTN-3 insert shank approx 3/8" x 3/8" x 3 3/8" please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
CARBIDE INSERT INDEXABLE TOOL HOLDER KENNAMETAL 1" X 1 1/2" SHANK KTGR-864C
OVERALL LENGTH IS 8" CHECK OUT THE PHOTOS TO SEE WHAT YOUR BUYING. WE WILL COMBINE SHIPPING ON ANY PURCHASES BOUGHT WITHIN 7 DAYS OF THE FIRST PURCHASE AND PASS ANY SAVINGS ON TO YOU. PLEASE LET US KNOW YOUR BIDDING ON OTHER ITEMS& LET US KNOW WHEN YOUR FINISHED. WAIT FOR US TO SEND A COMBINED INVOICE BEFORE PAYING. IF YOU HAVE ANY QUESTIONS CONTACT US BEFORE BIDDING. THANKS FOR LOOKING. NOTE: READ THE FOLLOWING BEFORE BIDDING" 1 MOST OF OUR MERCHANDISE COMES FROM ESTATE AUCTIONS. WE LOOK THEM OVER AND TRY TO DESCRIBE THEM TO THE BEST OF OUR KNOWLEDGE. BUT IF WE HAVE INADVERTENTLY MISREPRESENTED AN ITEM WE GUARANTEE FULL REFUND WITH IT'S RETURNED. 2 BUYER PAYS ALL SHIPPING COST. THE POSTAGE IS BASED ON ESTIMATED PACKAGED WEIGHT AND FIGURED AS CLOSE AS POSSIBLE. WE DO NOT CHARGE FOR PACKAGING MATERIALS. ONLY THE ACTUAL COST ... moreOF POSTAGE. 3 INVOICES ARE AUTOMATICALLY SENT BY EBAY AFTER THE AUCTION HAS ENDED. 4 WE EXPECT YOUR PAYMENT TO BE PAID OR MAILED WITH IN 3 DAYS AFTER THE AUCTION. WE FOLLOW EBAY GUIDE LINES IN FILING NON-PAYMENTS. WE SHIP YOUR PURCHASE ON THE NEXT MAILING DAY WHEN PAYMENT IS RECEIVED. 5 IF YOUR UNHAPPY WITH YOUR PURCHASE. PLEASE CONTACT US AS SOON AS POSSIBLE. WE WILL GIVE A COMPLETE REFUND WITH IT'S RETURN OR WORK OUT AN ADJUSTED REFUND IF YOUR WANTING TO KEEP IT. WE STRIVE TO MAKE EBAY A POSITIVE EXPERIENCE' THANKS FOR LOOKING. DON& SHARON
KENNAMETAL CARBIDE INSERT TOOL HOLDER SCGCR-082 NE5
used.In good condition
Lathe Carbide Indexable Insert Tool Holder With 3/4" Shank NSR-123B, Used
Lathe Carbide Indexable Insert Tool Holder With 3/4" Shank Marked NSR-123B. Used condition. Some grinding at the front of the tool You get the tool just as you see in the pictures Posted with
Lathe OD Turning Tool Holder Carbide insert VALENITE
Item. 3 used Carbide Lathe toolholder Manufacturer. looks like VALENITE but no markings are found
KENNAMETAL CARBIDE INSERT TOOL HOLDER DCLNR-124B FOR QUICK CHANGE TOOL POST
HERE'S A KENNAMETAL CARBIDE INSERT TOOL HOLDER DCLNR-124B WITH 3/4" SQUARE SHANK FOR QUICK CHANGE TOOL POST. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
NEW TUNGALOY INDEXABLE FACING TOOL HOLDER 1" X 6" MWLNR16-4D USA CARBIDE INSERT
New Tungalloy Indexable Facing Tool Holder Model MWLNR16-4D 1" Shank x 6" Long Made in the USA Includes 1 New Solid Carbide Insert WNMG431P No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction ... moreend- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
CARBIDE INSERT LATHE TOOLS W/INSERTS + BORING BAR HOLDER MACHINIST TOOLS
All of the tools are about 5/8 wide. Lots of turning left in them. PAYPAL preferred but will accept a m$ney $rder. We only ship to US locations. Shipping and handling for this item will be $6.00. I will be happy to combine shipping whenever possible to keep your cost as low as possible. I often use the Postal Flat Rate boxes. Please see my other auctions for machinist tools. When you receive your item and all is OK please leave me a feedback so that I know you received it and I will leave a feedback for you. If there is a problem please let me know right away so I can correct it. Thank You.
Help