Indexable Chamdrill Iscar Indexable Chamdrill Kendex Metcut Trigon Indexable Carbide Insert Coolant Drill 1 Iscar Indexable Chamdrill Dcm Indexable Spade Drill Kub Trigon Hss Coolant Indexable Chamdrill Dcm Straight Shank Coolant 48 Carbide Tipped Gun Drill 16 Coolant Fed Insert Drill Coolant Thru Spade Drill Holder Coolant Fed Drill Bit Carbide Coolant Fed Drill Insert Drill Kub Indexable Coolant Fed Drill Carbide Tipped Coolant Indexable Coolant Thru Drill Allied Drill 8 Coolant Fed Indexable Drill W Insert Coolant Twist Drill Carbide Insert Coolant Drill Indexable Coolant Fed Hss Drill Coolant Indexable Insert Coolant Drill Mist Coolant Sandvik Drill Iscar Cham Drill Taper Shank Insert Drill Carbide Tipped Std Deep Hole Drill Eldorado Carbide Tipped Std Deep Hole Masters Eldorado Carbide Tipped Std Deep 2 Spade Drill Kub Trigon Abs 50 Komet 1 Waukesha 1 Shank Carbide Insert Drill 1 Used Iscar Cham Drill Abs 50 Spade Drill 5 Kool Mist Iscar Drill Drill Body Drill Masters Komet Abs 50 Amec Coolant Komet Carbide Insert Straight Shank Coolant Twist Drill Carbide Insert Coolant Drill 2 Kub Trigon Abs 50 Indexable Drill Komet Kub Oil Hole Drill Kendex Metcut Taper Shank Insert Drill Trigon Indexable Drill V57 Spade Drill 1 Komet Abs Spade Drill 4 Morse Taper Waukesha Walter Insert Coolant Drill 1 Abs 63 Sandvik Corodrill Eldorado 1 Solid Carbide Coolant Spade Drill Insert 750 Shank Series Spade Drill Drill Bit Cutter Amec Series Coolant Spray Series Spade Drill Holder Tipped Std Deep Hole Drill 0 Coolant System Kendex Metcut Straight Shank 1 Shank Insert 0 Spade Drill Spade Drill 4 Morse Taper Shank Nice Amec Indexable Spade Drill Holder Indexable Drill 1 Coolant Thru Drill Coolant Fed Indexable Spade Drill Indexable Coolant Coolant Fed Drill Coolant Fed W Insert Coolant Induced Coolant Twist Drill 1 Carboloy Carbide Insert Coolant Drill Coolant Feeding Insert Coolant Drill Snmg Carbide Drills Shank Coolant Insert Coolant Drill Modular Drill Coolant Thru Spade Drill Carbide Coolant Drill Coolant Fed Eldorado Gun Drill Dia X 750 Shank Hertel Indexable Chamdrill Body Solid Carbide Drill Tin Coated Mist System 64 To 15 16 Coolant Fed Indexable Drill Bit Qwik Twist Indexable Drill W Insert Morse Taper Coolant Induced Shank Walter Carbide Insert Coolant Carbide Tipped Gun Drill Chamdrill Dsm Carbide Brazed Davis Cat50 21 Carbide Drill 2Xd Ingersoll Carbide Insert Universal Spade Spade Drill Holder 45 64 Drill Holder 45 64 To 15 Holder 45 64 To 15 16 Bt40 End Mill Holder Indexable Carbide Insert Coolant Fed Twist Drill Inch Oil Hole Drill 1 Coolant Drill 45 64 To 15 16 Coolant 3Xd Coolant Cjt Koolcarb Trigon Abs 50 Indexable Drill 3Xd Walter Titex 16 Insert Indexable Drill 32 Dia 1 5 8 Drill Single Flute Star Cutter Insert Drill Trigon Indexable Insert Drill Insert Tips Eldorado Cemented Carbide Gun Drill Straight Flute Iscar Dcm Indexable Coolant Thru Drill Exair 2 Loc Dcm Indexable Coolant Thru Drill Body Trico 12Mm Drill 27 64 Osg 1 1 1 2 1 1 4 Shank 1 2 Shank 1 Drill Bit 1 Shank 1.0 1.1875 1.1875 Insert Drill 1.5 10 Carbide Tips Gun Drill 1-1 2 Shank 11 32 1-1 4 1-3 4 1-3 8 16 Carbide Tips Gun Drill 16 Dia 18 Carbide Tips Gun Drill 2 Dia 2 Shank 2 T-A 21 2-1 2 22 Carbide Tips Gun Drill 2-Drill Masters Eldorado Carbide Tips Std 2-Pcs-Drill Masters Eldorado Carbide Tips Std 3 4 Shank 3 Drill 3 Morse Taper 32 Straight 36 Carbide Tips Gun Drill 3-Drill Masters Eldorado Carbide Tips Std 4 Dia 4 Oal 4 Shank 48 Carbide Tips Gun Drill 5 16 5 Carbide Tips Gun Drill 50 Indexable Drill 3Xd W Insert 60 Carbide Tips Gun Drill 7 8 Dia 8 Insert 8Mm 9 16 Aluminum
 In 
 
Categories
Order by: 
Available to: 
Price: 
 - 
This site contains affiliate links for which I may be compensated
(2) AMEC 3/4" Spade Drill Insert Super Cobalt #1 T-A Allied 151T-0024
$
31.45
Buy It Now
$4.40 Shipping
Condition: New
Location: East Jordan, United States
1 NEW 3/4" ALLIED SPADE DRILL INSERT T-A. SUPER COBALT. 151T-0024 AMEC COATED. WHAT IS SHOWN IN MY PICTURE. IS THE ITEM YOU ARE PURCHASING. TAKE ... moreA LOOK. PLEASE EMAIL OR CALL FOR ANY QUESTIONS YOU MAY HAVE 1-800-999-8952 M&M TOOLS CORP. PLEASE NOTE THAT 1 DAY SHIPPING IS DIFFERENT THAN 1 DAY DELIVERY We are a family owned business and we operate on the honor system. For any reason you have a problem with any of our tooling. Please email us, contact us through eBay, or call us anytime 1-440-897-7919. We take care of our customers to the best of our abilities. We describe our tooling as it is, we do not hide anything. Please don't hesitate to ask us any questions before purchasing. Thanks M&M Tools Corp. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-1413d0e15ca-0xf5-
AMEC ALLIED SPADE DRILL 1.058'' BODY #2 T-A SHANK 1-1/4'' SHANK LOC2226
$
80.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Troy, United States
AMEC ALLIED 24020H-003I SPADE DRILL .950'' BODY #2 T-A SHANK #3MT LOC2186
$
85.00
Buy It Now
Free Shipping
Condition: Used
Location: Troy, United States
4 AMEC INDEXABLE SPADE DRILL INSERTS Super Cobalt Tin Gen2 T-A 2.6250 455H-0220
$
9.99
6d 18h 52m 51s
0 bids
$6.16 Shipping
Condition: Used
Location: Chambersburg, United States
Some have more wear than others,see pictures for conditions. These are used. I can take more photos if neede
971223-21-2T-4SR SPADE DRILL 1.340'' BODY #3 T-A SHANK #4MT LOC2175
$
75.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Troy, United States
MODEL NUMBER; 971223-21-2T-4SR.
AMEC Gen2 T-A Series #4 HSS Spade Drill Insert QTY1 434T-0214 (LOC2858B)
$
39.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
Insert Type: Series #4. Condition: New. Coating: TiN.
AMEC ALLIED Machine #2T-A SHT 1” 232T-1000 Spade Drill
$
79.99
Buy It Now
$10.60 Shipping
Condition: Used
Location: Watsontown, United States
This AMEC ALLIED Machine #2T-A SHT 1” 232T-1000 Spade Drill is a high-quality tool that is perfect for metalworking tasks. It is made in the United States ... moreand features a durable design that ensures a long lifespan. The drill is designed to help you complete your tasks quickly and efficiently, and it is ideal for use in a variety of metalworking applications.The drill is branded by AMEC, a reputable company that is known for producing high-quality tools. It is suitable for use in a variety of metalworking tasks, including drilling, shaping, and cutting. With its sturdy design and reliable performance, this drill is a great choice for anyone who needs a reliable tool for their metalworking needs.
2-1/2in AMEC USA ALLIED Machine #4 T-A spade Drill Bit Tool HOLDER 24040H-150F
$
134.50
Buy It Now
Free Shipping
Condition: Used
Location: Grand Rapids, United States
This is for the spade drill holder only, no bits are with it and. Coolant fed Spade drill holder. Spade Drill Length Standard. Shank size. 1.5" with internal ... morethreads. Shank Type Flatted. Condition. Nice used, just needs 2 screws and a bit and it will be ready to use.
AMEC GEN#2 T-A 4C12H-25 C1 AM200
$
25.00
Buy It Now
Free Shipping
Condition: Used
Location: Houston, United States
1 BOX 2 PIECES EACH BOX OF USED 4C12H-25 C1 AM200.
1.1719 ( 29.77 mm) #2 T-A SPADE DRILL ALLIED MACHINE * Pack Of 2 Pcs*
$
49.00
Buy It Now
$8.00 Shipping
Condition: New
Location: Cypress, United States
Up for sale are 2 pieces of the #2 T-A Spade Drill made by Allied Machine. With a diameter of 1.1719 inches (29.77 mm), this drill is perfect for use ... morein CNC, metalworking, and manufacturing industries. The drill is made of high-quality metalworking supplies and is designed to be durable and long-lasting. The Brand is Allied and is an ideal Item Type for drilling tasks in the industry. This drill is a perfect addition to any professional workspace and can help you complete your metalworking projects with precision and speed. Whether you are working on a personal project or in a manufacturing facility, the T-A Spade Drill can help you achieve the results you need.
AMEC ALLIED 24025H-003I SPADE DRILL 1.170'' BODY #2 T-A SHANK #3MT LOC2184
$
65.00
Buy It Now
Free Shipping
Condition: Used
Location: Troy, United States
AMEC Gen2 T-A Series #3 HSS Spade Drill Insert QTY1 433T-0118 (LOC2858B)
$
29.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
Insert Type: Series #3. Condition: New. Coating: TiN.
AMEC ALLIED Machine #2T-A SHT 1” 232T-1000 Spade Drill 3/4” Shank Modified
$
49.99
Buy It Now
$10.60 Shipping
Condition: Used
Location: Watsontown, United States
This AMEC ALLIED Machine #2T-A SHT 1” 232T-1000 Spade Drill with a 3/4” Shank Modified is a great tool for any metalworking needs. The drill is made by ... moreAMEC, a top brand in the industry, and manufactured in the United States. This drill falls under the category of Other Metalworking Drills and is perfect for those in the Business & Industrial or CNC, Metalworking & Manufacturing fields. It has been previously used, but its quality is still excellent. Purchase this drill now and enhance your metalworking capabilities.
2 NEW 1-1/64" ALLIED SPADE DRILL INSERT BIT 152N-1.015. AMEC #2 T-A TiCN. {A399}
$
64.95
Buy It Now
Free Shipping
Condition: New
Location: Mentor, United States
2 NEW 1-1/64" (1.015625) ALLIED SPADE DRILL INSERT BIT. M&M TOOLS CORP. THICKNESS OF BIT: 3/16". MATERIAL: COBALT.
Allied Machine Series Z 2MT T-A Spade Drill Holder Coolant Thru USA Made
$
96.99
Buy It Now
Free Shipping
Condition: New
Location: Farmington, United States
ALLIED MACHINE. This reduces holder failure in high torque applications. Call for pricing. Failure to do so could result in tool failure and/or personal ... moreinjury. Shank Type Morse Taper Overall Length (OAL) ‎6-5/16″.
ALLIED MACHINE #2 T-A STRAIGHT FLUTE SPADE DRILL - 22020S-003I
$
229.99
Buy It Now
$12.00 Shipping
Condition: Used
Location: West Covina, United States
This is a used Straight Flute Spade Drill in GREAT condition. Made in the U.S.A. by Allied Machine & Engineering Corp. Flute Type: Straight. Flute Length: ... more3-3/8". Overall Length: 9-25/32". Model #: 22020S-003I.
AMEC ALLIED SPADE DRILL 1.155'' BODY #2 T-A INSERT SHANK 32MM LOC2272
$
70.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Troy, United States
AMEC GEN#2 T-A 4C12H-25 E1 Set Of 7 Lightly Used
$
63.74
Buy It Now
$4.99 Shipping
Condition: Used
Location: New Port Richey, United States
The AMEC GEN#2 T-A 4C12H-25 E1 Set Of 7 is a set of lightly used metalworking drills. The brand of the product is AMEC and it was manufactured in the ... moreUnited States.
AMEC ALLIED SPADE DRILL 1.020'' BODY #2 T-A SHANK 32MM SHANK LOC2227
$
80.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Troy, United States
AMEC ALLIED 22020S-0041 SPADE DRILL .950 BODY #2 T-A #4MT LOC2172
$
75.00
Buy It Now
Free Shipping
Condition: Used
Location: Troy, United States
(2) AMEC 7/16" Carbide Spade Drill Insert Gen2 #Z T-A Allied 4C2ZH-0014
$
31.45
Buy It Now
$4.40 Shipping
Condition: New
Location: East Jordan, United States
Condition: New.
AMEC 22020S-100L Indexable Spade Drill #2 T-A 31/32" - 1 3/8" Allied
$
134.96
Buy It Now
$8.80 Shipping
Condition: Used
Location: East Jordan, United States
Condition: Excellent, used.
3.00 Allied machine spade drill. #5 Gen 2 T-A * Pack Of 1 Pc*
$
59.00
Buy It Now
$8.25 Shipping
Condition: New
Location: Cypress, United States
This 3.00 Allied machine spade drill is a high-quality tool that will help you complete your metalworking projects with ease. The #5 Gen 2 T-A design ... moreensures precision and accuracy, making it a reliable choice for professionals and hobbyists alike. Made in the United States, this spade drill is built to last and will provide you with long-lasting performance.With a brand name like Allied and MPN number M6877720, you know you're getting a top-of-the-line tool. This spade drill is perfect for those in the business and industrial sector, as well as those in the CNC, metalworking, and manufacturing fields. So if you're looking for a reliable and efficient spade drill, this is the one for you.
1 NEW 1-3/4" ALLIED SPADE DRILL INSERT BIT 483A-0124 AMEC. #3 T-A GEN2. {A377}
$
39.95
Buy It Now
Free Shipping
Condition: New
Location: Mentor, United States
#3 T-A GEN2. 1 NEW 1-3/4" (1.7500) ALLIED SPADE DRILL INSERT BIT. THICKNESS OF BIT: 1/4". MATERIAL: COBALT. M&M TOOLS CORP.
AMEC ALLIED 24000H-002I SPADE DRILL .497'' BODY #0 T-A SHANK #2MT LOC2219
$
60.00
Buy It Now
Free Shipping
Condition: Used
Location: Troy, United States
AMEC 1-3/4" Carbide Spade Drill Insert #3 T-A C2 TiAlN 1C23A-0124
$
58.45
Buy It Now
Free Shipping
Condition: New
Location: East Jordan, United States
Condition: New.
AMEC #2 T-A 35mm Spade Drill Insert QTY2 1C22T-35 (LOC300)
$
44.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
Insert Type: Spade Drill. Condition: New.
AMEC 960919-8 indexable drill w/step chamfer #2 T-A 1.34" Minimum cut
$
49.99
Buy It Now
Free Shipping
Condition: Used
Location: Bethlehem, United States
22020S-125L #2 Series T-A Holder Short Flute 1-1/4 SS Allied Machine Spade Drill
$
225.00
Buy It Now
$12.45 Shipping
Condition: New – Open box
Location: Riverside, United States
Flute Shape: Straight Flute. Flute Length: 4.500". Pipe Tap: 1/8". Maximum Drill Depth: 3.325". Designation: #2 TA SHT HLDR 1-1/4" SS. Shank Style: Straight. ... moreBlade Series: #2.
Allied Machine #0.5 TA Indexable Spade Drill Body, .615" Diameter, 16" OAL AMEC
$
206.95
Buy It Now
Free Shipping
Condition: New
Location: East Jordan, United States
Shank: 0.75" x 2" OAL. OAL: 15.893". Allied #0.5 T-A Helical Spade Drill. Unit is a per print custom tool. On orders before 1pm EST M-F.
1 USED AMEC 21020S-32FM DRILL BODY HOLDER #2 T-A STUB METR. W/ COOL USA [V159]
$
135.95
Buy It Now
$10.00 Shipping
Condition: Used
Location: Mentor, United States
DRILL BODY HOLDER FOR THE DRILL INSERTS. We describe our tooling as it is, we do not hide anything. USED BUT IN AMAZING CONDITION. LOOKS TO BE ONLY USED ... moreONCE OR TWICE.
AMEC 1 3/8 O.D. INDEXABLE SPADE DRILL 212T-0003 #2 T-A SHT 3MT MT3 SHANK 1.375
$
174.99
Buy It Now
Free Shipping
Condition: Used
Location: Dayton, United States
212T-0003 #2 T-A SHT 3MT. INDEXABLE INSERT DRILL. Condition: Used. OVERALL LENGTH ITEM TITLE. COOLANT THRU?. YOU ARE PURCHASING THE PICTURED.
2 NEW 31 MM ALLIED SPADE DRILL INSERT BIT 132T-31 AMEC #2 T-A {A455}
$
49.95
Buy It Now
Free Shipping
Condition: New – Open box
Location: Mentor, United States
ALLIED SPADE DRILL INSERT BIT. M&M TOOLS CORP. THICKNESS OF BIT: 3/16". MATERIAL: CPM-M4. WHAT IS SHOWN IN MY PICTURE, IS THE ITEM YOU ARE PURCHASING.
AMEC ALLIED 240Z0H-002I SPADE DRILL .428'' BODY #Z T-A SHANK #2 MT LOC2261
$
60.00
Buy It Now
Free Shipping
Condition: Used
Location: Troy, United States
Allied Machine AMEC Special Holder #2 T-A indexable spade drill 040514-103
$
86.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Bethlehem, United States
AMEC ALLIED Machine #2T-A SHT 1-1/4” 272T-1250 Spade Drill
$
99.99
Buy It Now
$10.60 Shipping
Condition: Used
Location: Watsontown, United States
This AMEC ALLIED Machine #2T-A SHT 1-1/4” 272T-1250 Spade Drill is a great addition to your metalworking supplies. Made in the United States by AMEC, ... morethis spade drill is perfect for CNC manufacturing and drilling in various materials. The brand of this drill is AMEC and it falls under the category of Business & Industrial, CNC, Metalworking & Manufacturing, Metalworking Supplies, Drills, and Other Metalworking Drills. With a 1-1/4” diameter, this spade drill is perfect for your drilling needs.
AMEC ALLIED 24020H-004I SPADE DRILL .950'' BODY #2 T-A SHANK #4MT LOC2176
$
90.00
Buy It Now
Free Shipping
Condition: Used
Location: Troy, United States
Allied AMEC Short Holder0.5 Series T-A Taper Shank 2MT 210-5T-0002 NEW USA
$
42.95
Buy It Now
Free Shipping
Condition: New
Location: Akron, United States
Allied Machine & Engineering Short Holder. 2 Morse Taper. Coolant hole within the morse taper, a coolant inducer may be needed for your application. Insert ... moreRange: 39/64" to 11/16". T-A (throw away inserts series #0.5).
AMEC .620" Indexable Spade Drill Holder #0.5 T-A 16" OAL Allied
$
143.96
Buy It Now
$9.80 Shipping
Condition: New
Location: East Jordan, United States
Condition: New w/ (4) torx screws. Flute Length: ~ 12-3/4".
2 NEW 1-1/4" ALLIED SPADE DRILL INSERT BIT 152N-0108. AMEC #2 T-A. TiCN. {A394}
$
64.95
Buy It Now
Free Shipping
Condition: New
Location: Mentor, United States
2 NEW 1-1/4" (1.2500) ALLIED SPADE DRILL INSERT BIT. M&M TOOLS CORP. THICKNESS OF BIT: 3/16". MATERIAL: COBALT.
AMEC #5 Gen2 T-A 2.6250" Cobalt Spade Drill Insert QTY1 455H-0220 (LOC3448B)
$
69.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
Modular Connection: Gen2 T-A. Grade: Super Cobalt. Material: Super Cobalt. Condition: New.
AMEC ALLIED 250ZOS-002I SPADE DRILL .428'' BODY #Z T-A SHANK #2MT LOC2198
$
65.00
Buy It Now
Free Shipping
Condition: Used
Location: Troy, United States
AMEC ALLIED 250Z0H-002I SPADE DRILL .428'' BODY #Z T-A SHANK #2 MT LOC2263
$
60.00
Buy It Now
Free Shipping
Condition: Used
Location: Troy, United States
AMEC #4 T-A 2-1/2" Super Cobalt Spade Drill Insert QTY1 454T-0216 (LOC307)
$
54.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
Insert Type: Spade Drill Insert. Coating: S. Cobalt TiN. Condition: New.
Allied AMEC Short Holder 0.5 Series T-A Taper Shank 2MT 210-5T-0002N NEW USA
$
47.95
Buy It Now
Free Shipping
Condition: New
Location: Akron, United States
Allied Machine & Engineering Short Holder. 2 Morse Taper. Coolant is within the morse taper; you may need a coolant inducer for your application. Insert ... moreRange: 39/64" to 11/16". For Throw Away TA Inserts Series #0.5.
AMEC BIG KAISER SPADE DRILL .950'' BODY #2 T-A SHANK 36MM LOC2251
$
110.00
Buy It Now
Free Shipping
Condition: New
Location: Troy, United States
AMEC T-A 2-5/32” Super Cobalt Tin Spade Drill Insert QTY1 154T-0205
$
49.99
Buy It Now
$5.40 Shipping
Condition: New
Location: Watsontown, United States
This AMEC T-A super cobalt TiN-coated spade drill insert is a high-quality tool suitable for metalworking and manufacturing applications. The drill insert ... moreis 2-5/32" in size and made of durable cobalt material. With its TiN coating, the drill insert is resistant to wear and tear, ensuring optimal performance and longevity.The drill insert is designed for use with other metalworking drills and is an ideal addition to any CNC machine. Its brand, AMEC, is known for manufacturing top-quality tools for industrial applications. This particular drill insert is brand new and has never been used before, making it a great investment for anyone in need of a reliable metalworking tool.
AMEC #1 GEN2 T-A 45/64" Carbide Spade Drill Insert QTY2 4C21P-.703 (LOC3621)
$
95.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
MPN: 4C21P-.703. Condition: New.
1 NEW 63/64" YG SPADE DRILL INSERT BIT SM08202. #2 T-A. S.HSS TiALN. (A525)
$
31.95
Buy It Now
Free Shipping
Condition: New
Location: Mentor, United States
SM08202 (SM115063}. MATERIAL: S.HSS TiALN. 1 NEW 63/64" YG. M&M TOOLS CORP. SPADE DRILL INSERT BIT. THICKNESS OF BIT: 3/16". ).
AMEC ALLIED SPADE DRILL 1.155'' BODY #2 T-A INSERT SHANK 32MM LOC2250
$
70.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Troy, United States
AMEC ALLIED 26000H-002I SPADE DRILL .497'' BODY #0 T-A SHANK #2MT LOC2210
$
70.00
Buy It Now
Free Shipping
Condition: Used
Location: Troy, United States
AMEC T-A #2 25mm Super Cobalt Spade Drill Insert QTY2 452H-25 (LOC2129B)
$
74.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
Material: Cobalt. Condition: New.
2 NEW 1-5/32" ALLIED SPADE DRILL INSERT BIT 152N-0105 AMEC #2 T-A TiCN. {A403}
$
64.95
Buy It Now
Free Shipping
Condition: New
Location: Mentor, United States
2 NEW 1-5/32" (1.15625) ALLIED SPADE DRILL INSERT BIT. M&M TOOLS CORP. THICKNESS OF BIT: 3/16". MATERIAL: COBALT.
AMEC ALLIED 24005H-002I SPADE DRILL .590'' BODY #0 T-A SHANK #2MT LOC2215
$
70.00
Buy It Now
Free Shipping
Condition: Used
Location: Troy, United States
Allied Machine & Engineering Original T-A® 182A-0108 2 Series Replaceable Spade
$
28.04
Buy It Now
$3.99 Shipping
Condition: Used
Location: New Port Richey, United States
AMEC #1 T-A 3/4" Carbide Spade Drill Insert QTY2 1C21A-0024-NP (LOC283B)
$
54.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
Condition: New.
AMEC ALLIED 25005H-002I SPADE DRILL .590'' BODY #0 T-A SHANK #2MT LOC2203
$
70.00
Buy It Now
Free Shipping
Condition: Used
Location: Troy, United States
NEW 1-29/64" ALLIED SPADE DRILL INSERT BIT 453T-1.4531 AMEC. #3 GEN2 T-A. {Z293}
$
29.95
Buy It Now
Free Shipping
Condition: New
Location: Mentor, United States
#3 GEN2 T-A. TIN COATED. 1 NEW 1-29/64" ALLIED SPADE DRILL INSERT BIT. THICKNESS OF BIT: 1/4. We describe our tooling as it is, we do not hide anything. ... moreM&M TOOLS CORP.
1.00 diameter (25.4 mm) #2 T-A Insert Flat Bottom* Packs Of 2 PCs)
$
40.00
Buy It Now
$8.00 Shipping
Condition: New
Location: Cypress, United States
This set of 2 Allied T-A insert drills, with a diameter of 1 inch (25.4 mm), is perfect for all your metalworking needs. The flat bottom design ensures ... moreprecise and accurate drilling, while the high-quality construction guarantees durability and longevity. Made in the United States, these drills are a reliable addition to your metalworking supplies. The MPN for these drills is M404200 and the item type is 152T-0100-FB. They are suitable for use in a variety of industries, including Business & Industrial, CNC, and Manufacturing. Get your hands on these drills today and experience the quality and precision of Allied products.
GEN2 T-A SERIES #7 T-A 437T-0400 4"
$
83.50
Buy It Now
$16.00 Shipping
Condition: New – Open box
Location: Robertsdale, United States
CL-C0E -REVISED 10/27/20 TR. When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty ... moreInformation.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
2 Lot Drill Masters Gun Drill TC1470106-021-C .0625 X7.5 GDSC12170 Machinist
You Get 2 Drills For 1 Price. This auction is for one Lot Of 2 Drill Masters Gun Drills. Tool No. TC1470106-021-C. Size.0625 X 7.5 Part GDSC12170. Please examine pictures closely to be sure this will work for your application. Selling As Is No Returns. Shipping will be Calculated in USA which includes Delivery Confirmation. PAYPAL ONLY. Please visit my EBAY store to see if there is anything else you might be interested in. Currently have some Other Machinist tools. Brass Valves, Fittings, Transducers, Electronic probes, micrometers, dial gages, Copper wire, EDM wire, resistors, books, cable zip ties, DVD,s fishing reels, small tools, and I have many used parts for engines and other items If you do not see what you need in any of my other auctions please e-mail me thru EBAY. If I have it I'll list it. Ships to Continental United States ... moreOnly to confirmed Paypal Address at this shipping price. I will be listing more items daily so check my store often for more bargains. Thanks for looking. Happy Bidding! International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. On Jan-14-12 at 08:44:03 PST. Seller added the following information:
Eldorado .2500 x 14" Carbide Tipped Gun Drill 2 Flute
Eldorado.2500 x 14" Carbide Tipped Gun Drill 2 Flute.75" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615 On Jan-10-12 at 03:53:55 PST. Seller added the following information:
iscar insert drill .coolant thru.5/8 shank & 2 inserts.1 new & 1 used.
comes with 1 new insert@ 425& 1 used 10 mm insert. will combine shipping.
KENDEX METCUT INSERT DRILL 2" DIA. COOLANT THRU 270-0200 Y LOT C1055
SquareTrade © AP6.0 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A KENDEX METCUT 2" DIAMETER INSERT DRILL WITH(1-3/4" DIA. SHANK FLUTE LENGTH: 4-1/2" OVERALL LENGTH: 11" WE ALSO HAVE MORE COOLANT THRU INSERT DRILLS LISTED AND LISTING MORE PLEASE TAKE A LOOK AT OUR OTHER ITEMS WE HAVE LISTED. Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL US AT 937-672-9876. Be sure to add me to your!
END MILL HOLDER, BT 50 1 1/4 2 each
2 ea. BT 50 1 1/4 end mill holder used.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13e1835f17c-0xef-
COOLANT FED INDEXABLE SPADE DRILL HOLDER W/ 1-1/2" SHANK - 1.686" DIA.
aims COOLANT FED INDEXABLE SPADE DRILL HOLDER W/ 1-1/2" SHANK- 1.686" DIA. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Coolant Fed Indexable Spade Drill Holder in good condition. Features: Used for deep hole drilling. Specifications: Current Cutting Diameter: 1.686" Shank: 1-1/2" round) Flute Length: 4" Overall Length: 7-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. COOLANT FED INDEXABLE SPADE DRILL HOLDER W/ 1-1/2" SHANK- 1.686" DIA. Reliable Tool Inc. c 2011 | Powered ... moreby
2 Sandvik carbide brazed driils 16 Mm & 16.75 on 20 Mm steel shank
2 Sandvik carbide brazed driils 16 Mm& 16.75 on 20 Mm steel shank. R4115-16732. Dc16.75 p20. R4115-16052. Dc16.00 p20. You get both drills! InkFrog Analytics.
Waukesha Spade Drill Tool Holder Range 1 ½ - 2 3/8
Normal 0 false false false EN-US X-NONE X-NONE This is a used Waukesha Spade Drill Tool Holder Range 1 ½- 2 3/8. At least I think it is a Waukesha Drill. Because there is a label taped on it, that say’s so. I am selling something I don’t know much about. But I do know it is a tool holder. I hope the pictures help. Used and sold as is US Only PayPal.
2 1/2" Vallenite Indexable Carbide Insert Coolant Drill wit 2" Shank, Real Nice
Large Indexable Drill Vallenite 2 1/2" with 2" Shank with Coolant Thru. Numbers on Drill are: VWDR-250-200-931A, VALU-U-DEX HP, 2.500 DIA, WC-52.5, PT-5467, 6T8, Real nice condition, Free shipping in USA ONLY. Serious offers accepted at time of offer. All others will be considered.
ingersoll insert drill .coolant thru with 2 tips 1 new @.740,1 used @.752
with 2 tips. will combine shipping.
3" dia. indexable insert coolant drill, 2 1/2" shank, 13" long
Here is an indexable insert coolant drill. It is approx. 3" diameter. Has a 2 1/2" dia. shank, and is 13" long. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. All international shipments will be through the U.S. post office ONLY. Sales tax is charged for PA sales unless exempt*
Allied 24040S-175L Spade Drill Holder 1-29/32" to 2-9/16" Coolant Fed
Allied Coolant Fed Spade Drill Holder(New Model# 24040S-175L/ Old Model# 244T-1750) Drill Insert Range: 1-29/32" to 2-9/16" Shank Diameter: 1-3/4" 2" with sleeve) Shank Length: 4" Max Drilling Depth: 9-1/8" Overall Length: 14-1/2" Type: Straight Shank and Flute This item is in good condition and comes as shown with shank sleeve and additional used 2-1/4" inserts. Will ship out one day after receipt of payment.
Nice Ingersoll Insert Drill A20608223RS1, 2", 5" Length, Trigon Insert, Coolant
For sale I NICE barely used Ingersoll Insert Drill A20608223RS1. Nom Dia 2.062" 5.15" Drilling Length, Trigon Insert Type, Coolant Thru, 2" Shank. Ingersol's replacement part number for this item is A052413123R01. I will ship International just email me for a shipping estimate. Buy with confidence. There is a 14 day return privilege if the item arrives not as described or non-functional unless otherwise stated in the description. Buyer must notify us within 14 days of items arrival. This is not a satisfaction guarantee. I will only honor a return if we miss-listed the items or it does not function properly. I try to take REALLY good photos so you know what you are bidding on. We want you to feel comfortable buying from us. If you have any questions please let us know. rt14.
Walter 2.375" Insert Drill B2196.UF.0603.Z01.151R
Walter 2.375" Insert Drill B2196.UF.0603.Z01.151R 2.50" Coolant Thru Shank 6.0" Drill Depth 12" OAL Good Working Condition Questions? Call Robert at 607-259-5615 NU2-D8M
CNC Coolant Through Carbide Brazed Drill Lot (2) 1 1/64 - 1.0156
Lot of 2 CNC carbide brazed tipped coolant through drills. Drills are in used condition some being better than others. But all in good condition. Carbide tips can be re-sharpened many more times. 1 1/64- 1.0156
2 KENNAMETAL CARBIDE TIPPED COOLANT FED DRILLS - 18.5mm TO 17mm
aims 2 KENNAMETAL CARBIDE TIPPED COOLANT FED DRILLS- 18.5mm TO 17mm read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Kennametal. These are 2 used Carbide Tipped Coolant Fed Drills in good condition. Specifications: Drill Sizes Range: 18.5mm TO 17mm. Shank Sizes Range: 25mm to 20mm. Lengths of Cut Range: 3-1/2" 4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has ... morea large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 2 KENNAMETAL CARBIDE TIPPED COOLANT FED DRILLS- 18.5mm TO 17mm Reliable Tool Inc. c 2011 | Powered by 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13e8402e73e-0xf8-
WAUKESHA COOLANT FED INDEXABLE SPADE DRILL TOOL HOLDER w/ 1" SHANK - 1-1/2" DIA.
aims WAUKESHA COOLANT FED INDEXABLE SPADE DRILL TOOL HOLDER w/ 1" SHANK- 1-1/2" DIA. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Waukesha Cutting Tools. This is a Coolant Fed Indexable Spade Drill Holder in good condition. Series# B Model# 2050-0132F 417 Features: Used for deep hole drilling. Specifications: Current Cutting Diameter: 1-1/2" Shank: 1" round) Flute Length: 8" Overall Length: 12-3/4" Comes as shown in pictures. ... moreCheck out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. WAUKESHA COOLANT FED INDEXABLE SPADE DRILL TOOL HOLDER w/ 1" SHANK- 1-1/2" DIA. WAUKESHA COOLANT FED INDEXABLE SPADE DRILL TOOL HOLDER w/ 1" SHANK- 1-1/2" DIA. Reliable Tool Inc. c 2011 | Powered by
HEAVILY USED WAUKESHA USA CARBIDE INSERT COOLANT DRILL 2.250" 8160-5216F ABS-80
LISTING IS FOR A USED WAUKESHA ABS-80 INSERT DRILL BRAND- WAUKESHA MADE IN THE USA PART# 8160-5216F DIAMETER- 2.2 50" DRILL DEPTH- 6.92" SHANK- ABS-80 USES INSERTS- SIZE"7" CONDITION- HEAV ILY USED ONE POCKET NEEDS RE BUILT SOME SCORING AND DINGS ON FLUTE Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: ... morePAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLIC
WALTER TITEX XTREME COOLANT FLOW THRU A3399XPL - 10.2 MM DRILL BIT SUPER CLEAN
GOOD USED CONDITION WALTER TITEX XTREME COOLANT FLOW THRU A3399XPL- 10.2 MM DRILL BIT SUPER CLEAN LOOKS UNUSED PICTURE IS ACTUAL ITEM HAS NO ENGRAVINGS OR PERSONAL MARKS Check out my other items! Be sure to add me to your favorites list! THIS ITEM PREVIEWED BEFORE SHIPPING TO ASSURE QUALITY. WILL COMBINE SHIPPING FOR MORE THAN 1 ITEM PURCHASED! IF YOU WOULD LIKE SHIPPING INSURANCE. PLEASE ADD $2.00 ADDITIONALLY TO SHIPPING COST AND ALERT ME IF YOU CAN! PLEASE NOTE: WILL NOT SHIP THIS ITEM TO ITALY. THIS ITEM MAY ALSO BE PICKED UP OR VIEWED LOCALLY AT MY STORE"THE TRADING POST" IN SANFORD. FLORIDA. PHONE# 407-328-8711 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e8a63bf64-0x106-
1-3/4" Indexable insert Drill marked 5131, with 1-1/2" Shank. Used
Indexable insert Drill marked 5131. I don't see a manufactures name or others numbers on the drill. with 1-1/2" Shank. Looks like it can drill to aprox 3-3/4"deep. Total length of drill is 8-3/8" Shank length is 3.65" Used condition. I don't see any damage on the drill, and no screws or inserts You get the tool just as you see it in the pictures. Posted with
SECO SD504 Coolant Feed Indexable Drill. 2-1/4" Diameter w/ 2 boxes of inserts
You are purchasing ONE SECO SD504 Coolant Feed Indexable Drill. 2-1/4" Diameter w/ 2 boxes of inserts. The drill has been lightly used but is in great condition. The inserts are brand new. You are getting a box of SCGX 150512-P2. T3000D Inserts and a box of SPGX1904-C1, T400D.
USED INGERSOLL CARBIDE INSERT COOLANT DRILL 1.687" (2"-SHANK) A16806723RS1
LISTING IS FOR A USED CARBIDE INSERT DRILL BRAND- INGERSOLL PART# A16806723RS1 DIAMETER- 1.687" FLUTE LENGTH- 6.750" OAL- 12.687" USES INSERTS- WXEG32-01(NOT INCLUDED) CONDITION- VERY LIGHTLY USED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION ... moreEND. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS AB
SANDVIK COROMANT 1-1/2" INDEXABLE COOLANT FED DRILL w/ 1-1/2" SHANK + INSERTS
aims SANDVIK COROMANT 1-1/2" INDEXABLE COOLANT FED DRILL w/ 1-1/2" SHANK + INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Sandvik Coromant. Model# RA416.1-1500-40-55 D1.500 This is an Indexable Coolant Fed Drill in Good condition. Specifications: Cutting Diameter: 1-1/2" Shank: 1-1/2" Straight. Flute Length: 6-1/2" Overall Length: 11-1/2" Comes as shown In pictures. Check out the photos! if you have any ... moreother questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SANDVIK COROMANT 1-1/2" INDEXABLE COOLANT FED DRILL w/ 1-1/2" SHANK + INSERTS SANDVIK COROMANT 1-1/2" INDEXABLE COOLANT FED DRILL w/ 1-1/2" SHANK + INSERTS Reliable Tool Inc. c 2011 | Powered by
NICE!! AMEC INDEXABLE SPADE DRILL HOLDER + BLADES #23020H-32FM #2 T-A INT METR
aims NICE! AMEC INDEXABLE SPADE DRILL HOLDER + BLADES#23020H-32FM#2 T-A INT METR read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by AMEC. This is a Coolant Induced Indexable Spade Drill in Good condition. Model# 23020H-32FM#2 T-A INT METR Specifications: Shank: 1-1/4" Flute length: 6" Overall length: 9-1/2" Includes lot of blades: 1-1/8" 1-3/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us ... morea call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! AMEC INDEXABLE SPADE DRILL HOLDER + BLADES#23020H-32FM#2 T-A INT METR NICE! AMEC INDEXABLE SPADE DRILL HOLDER + BLADES#23020H-32FM#2 T-A INT METR Reliable Tool Inc. c 2011 | Powered by
NICE AMEC INDEXABLE SPADE DRILL HOLDER + BLADES 22020S-125L #2 T-A SHT 1-1/4" SS
aims NICE AMEC INDEXABLE SPADE DRILL HOLDER + BLADES 22020S-125L#2 T-A SHT 1-1/4" SS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by AMEC. This is a Coolant Induced Indexable Spade Drill in Good condition. Model# 22020S-125L#2 T-A SHT 1-1/4" SS Specifications: Shank: 1-1/4" Flute length: 4" Overall length: 8" Includes lot of blades: 1-1/8" 2)1-3/8" Comes as shown in pictures. Check out the photos! if you have any other ... morequestions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE AMEC INDEXABLE SPADE DRILL HOLDER + BLADES 22020S-125L#2 T-A SHT 1-1/4" SS Reliable Tool Inc. c 2011 | Powered by
Allied Long Spade Drill Holder 2" to 2-7/8" Taper Shank MT4 (22041-0004)
Allied Series D Spade Drill Holder(22041-004/ D-600-4MT-SR) Drill Insert Range: 2" to 2-7/8" Flute Length: 18" Overall Length: 24-9/16" Type: MT#4 Taper Shank Straight Flute Made in USA This item is in good condition and comes as shown. Will ship out one day after receipt of payment.
Allied Spade Drill Holder 2" to 2-7/8" Taper Shank MT4 (21841-0004)
Allied Series D Spade Drill Holder(21841-004/ D-500-4MT-SR) Drill Insert Range: 2" to 2-7/8" Flute Length: 9" Overall Length: 15-9/16" Type: MT#4 Taper Shank Straight Flute Made in USA This item is in good condition and comes as shown. Will ship out one day after receipt of payment.
Allied 220Z0S-075L Spade Drill Holder 7/16" to 1/2" Coolant Fed w/ Insert
Allied Coolant Fed Short Spade Drill Holder(220Z0S-075L) Drill Insert Range: 7/16" to 1/2" Shank Diameter: 3/4" Max Drilling Depth: 1-1/4" Overall Length: 4-13/32" Type: Straight Shank and Flute Made in USA This item is used and comes as shown. Will ship out one day after receipt of payment. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13ecd6afa5f-0xf5-
NICE AMEC INDEXABLE SPADE DRILL HOLDER 22020S-125F w/ Extra Spades #2 T-A Style
NICE AMEC INDEXABLE SPADE DRILL HOLDER 22020S-125F w/ Extra Spades#2 T-A Style Thru coolant Drill w/ Extra Spade Bits Used 1-1/4" Shank Used a few times like new condition. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13ecd6afa4f-0xfd-
2 MINT Kennametal indexable insert drills. Quick change KM50
2 MINT Kennametal indexable insert drills. Quick change KM50 KM50DFT2000R2 2.000"2.252" KM50DFT1250R3 1.250"1.314"
2 COOLANT FED HSS 1-3/8" DRILLS
aims 2 COOLANT FED HSS 1-3/8" DRILLS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 2 used Coolant Fed HSS Drills in GREAT condition. Specifications: Drill Sizes: 1-3/8" Shank Sizes: 1-3/8" Lengths of Cut: 8-1/4" Overall Lengths: 14-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 2 COOLANT FED HSS 1-3/8" DRILLS Reliable Tool Inc. c 2011 | Powered by
USED SANDVIK CORO CAPTO C5 INSERT DRILL 1/2" R416.2-0127C5-41 (.500") 12.7mm
LISTING IS FOR A USED SANDVIK CORO CAPTO INSERT DRILL BRAND- SANDVIK PART# R416.2-0127C5-41 S IZE- 500" MA X HOLE DE PTH- 51.00mm CO UPLER- C5 USES INSERTS- LCMX 02. 4XD CONDITION- GOOD USED SOME MINOR S CORING ON FLUTES SOM E MINOR SURFACE RUST PITTING ON COUPLER LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: ... morePAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPD
Komet 1-1/2 dia. 5" flute. indexable coolant drill with inserts
Komet 1-1/2 dia. 5" flute. indexable coolant drill with inserts
valenite 1.2"dia. 4"flute indexable coolant drill
valenite 1.2"dia. 4"flute indexable coolant drill
Sandvik 1"dia 3-1/2"fl indexable drill with inserts
Sandvik 1"dia 3-1/2"fl indexable drill with inserts
40 BOTEK 2.9MM X 175MM OAL,HSS,COOLANT,SINGLE FLUTE GUNDRILLS
Inventory Number: 05131540015 Manufacturer: Description: 40 BOTEK 2.9MM X 175MM OAL.HSS,COOLANT,SINGLE FLUTE GUNDRILLS Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 40, RE-GRINDED, 1/2" OUTER DIAMETER SHANK, MADE IN GERMANY BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer ... moreBuy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items wit
45 BOTEK 2.9MM X 175MM OAL,HSS,COOLANT,SINGLE FLUTE GUNDRILLS
Inventory Number: 05131540003 Manufacturer: Description: 45 BOTEK 2.9MM X 175MM OAL.HSS,COOLANT,SINGLE FLUTE GUNDRILLS Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 45, RE-GRINDED, 1/2" OUTER DIAMETER SHANK, MADE IN GERMANY BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer ... moreBuy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items wit
8 CARBIDE TIPPED COOLANT FED GUN DRILLS - 3/8" to 1/2"
aims 8 CARBIDE TIPPED COOLANT FED GUN DRILLS- 3/8" to 1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 8 used Carbide Tipped Coolant Fed Gun Drills in good condition. Specifications: Drill Sizes Range: 3/8" to 1/2" Shank Sizes Range: 1"OD- 7/16"ID Lengths of Cut Range: 1" Overall Lengths: 6" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 8 CARBIDE TIPPED COOLANT FED GUN DRILLS- 3/8" to 1/2" Reliable Tool Inc. c 2011 | Powered by
KOMET ABS 63 2" DIA 6" LONG ABS63 IN GOOD COND LOT C2989
LOT# C2989 WE ARE OFFERING A KOMET ABS 63 2" DIA 6" LONG WE ALSO HAVE CAT50 KOMET HOLDERS LISTED. YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
12" indexable coolant drill with 6"fl 2"dia. 17 wcmx080412r-51 inserts
12" indexable coolant drill with 6"fl 2"dia. 17 wcmx080412r-51 inserts
1 1/2 # 4 MORSE TAPER HS-CO NACHI JAPAN GL DRILL BIT
THE DRILL IS 15 3/4 INCHES LONG.
LAST USED WALTER VALENITE XTRA-TEC INSERT DRILL 2.250" B4213.UF51.572.Z1.171R-8
LISTING IS FOR A USED WALTER VALENITE XTRA-TEC INSERT DRILL BRAND- WALTER VALENITE PART# B4213UF51.572.Z1.171R-8 DIAMETER- 2.250" FLUTE LENGTH- 6.750" OAL- 11.625" SHANK- 2.00" USES INSERTS- P484.P-8R CONDITION- VERY GOOD USED LAST IN STOCK! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST ... moreBE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NO
Kennametal & Valenite Insert Drills (2) - with inserts
2) Coolant-Thru Insert Drills(1) Valenite# 10T2 Insert Drill- 1.937" Diameter Part# VWDR-193-150-740 11.75" Overall Length. 6-1/2" Flute length, 1.5" Diam. Shank(2) Used inserts included appears to be in good condition* 1) Kennametal Kendex-Medcut Insert Drill- Part# 270-0112 Flute Length- 3.5" Overall length 8.125" Shank- 1.25" diam. 2) used inserts included No returns- AS-IS. what you see is what you get. The above data is based on our measurements. Which may not be exactly the same as catalog data
indexable carbide insert drill through hole coolant 1 1/2" shank drill body .900
indexable carbide insert drill through hole coolant 1 1/2" shank drill body.900" depth of cut 2 1/2" No combined shipping and handling discount Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Indexable Spade Drill , Through Coolant 3/4" Shank drill body diameter 1/2"
Indexable Spade Drill. Through Coolant 3/4" Shank drill body diameter 1/2" No combined shipping and handling discount Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
LAST ONE! USED KOMET INSERT DRILL 1.406" ABS50 KUB01/1.406/2.812-R38 (V1233570)
LISTING IS FOR A USED ABS KOMET INSERT DRILL BRAND- KOMET ORDER NO. V1233570 DESCRIPTION- ABS 50 KUB 01/ 1.406/ 2.812 R38 SIZE- 1.406" FLUTE LENGTH- 2.812" COUPLER- ABS-50 USES INSERTS- W29 34010.04. NOT INCLUDED) CONDITION- GOOD USED SOME SCORING ON FLUTES AND NEAR POCKETS LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. ... morePAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIG
MADE IN USA 1-9/16DIA 1-1/2" SHANK 4" LONG LOT C3100
LOT# C3100 COOLANT THRU INSERT DRILL WE ARE OFFERING A MADE IN USA 1-9/16" DIA 1-1/2" SHANK 4" LONG. YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
KENDEX METCUT INSERT DRILL 270-0250 2-1/2" DIA 2-1/4"SHANK 6" LONG LOT C2987
LOT# C2987 WE ARE OFFERING A COOLANT THRU INSERT DRILL KENDEX METCUT 2-1/2" DIA 6" LONG WITH 2-1/4" SHANK. PART# 270-0250 YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
KENDEX METCUT COOLANT THRU INSERT DRILL 2-1/2" DIA 2" SHANK 4" LONG LOT C3101
LOT# C3101 WE ARE OFFERING A KENDEX METCUT COOLANT THRU INSERT DRILL MADE IN USA KENDEX METCUT 2-1/2"DIA 2" SHANK 4" LONG YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
Allied "E" Series Spade Drill Holder 2-1/2" to 3-3/8" (20851-2000 / E-200-200)
Allied"E" Series Spade Drill Holder(20851-2000/ E-200-200) Drill Insert Range: 2-1/2" to 3-3/8" Shank Diameter: 2" Flute Length: 10" Overall Length: 14" Type: Straight Shank and Flute Coolant Fed: Yes Made in USA This item is in good condition and comes as shown. Will ship out one day after receipt of payment.
2-3/8" Carbide Indexable Inserts Drill Bit Ingersoll Coolant Fed Tool holder
Item. Qty.1 Machine Carbide Indexable Drill. Coolant feeding tool holder Manufacturer. Ingersoll Drill Max Model. A23709523RS1 83320 Cutting diameter. 2.370" Just a hair under 2-3/8" Insert type. Shank. 2" round with a Flat and threads in the end of the shank for coolant Overall Length. 15-1/4" Plunge depth 10-1/4" Condition. Good used. It does not have any inserts or screws to hold the inserts. We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store ... moreplease do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd. NW Grand Rapids. MI 616-791-9395
1-1/2 cut 1/4 Thick SPADE Drill bit Cutter Tip Insert Tin Coated AMEC Kennametal
Item. SPADE Drill Bit Cutting Tip for coolant feeding indexable drill Tool Holder Manufacturer. Soem by Kennametal. Some by AMEC Allied Machine and Engineering Corp USA Made in the US America 1/4" Locating area Condition. Super sharp. It is still coated in plastic, I believe it is a resharp. I am not sure if it is high speed steel or cobalt, they are not carbide. Split point tip Tin Coat This is not an actual photo but it is pretty much identical to the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and ... moreif you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! Pay me securely with any major credit card through PayPal! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every o
USED WALTER WAUKESHA INSERT DRILL 61.00mm+/- (2.00"-Shank)
LISTING IS FOR A USED WAUKESHA WALTER INSERT DRILL BRAND- WAUKESHA WALTER PART# DIAMETER- 61.00 mm Size is approximate FLUTE LENGTH- 9.50" SHANK- 2.00" COOLANT THRU MADE IN THE USA USES SIZE- 2 COR-BOR DRILL INSERTS(NOT INCLUDED) CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED ... moreSHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYM
Kendex 2 inch drill Metcut 1-3/4 shank Carbide Coolant through drill
LISTING IS FOR A KENDEX METCUT INSERT DRILL Yes it has a little burn on one edge does not effect the use. Man this puppy worked great I personally used this with out Mazak lathe. Thank you and God Bless! P/N- 270-0200 DIAMETER- 2.00" SHANK DIAMETER- 1.750" EFFECTIVE DRILL DEPTH- 5.50" OAL- 10.75" USES INSERTS- SNMG(NOT INCLUDED) COOLANT FED CONDITION- GOOD USED
RTW SINGLE FLUTE MACH 6 INSERT DRILL 2.00" LEFT HAND
LISTING IS FOR A USED RTW MACH 6 INSERT DRILL SINGLE FLUTE MACH"6" DIAMETER- 2.00" LEFT HAND ROTATION& CUT SHANK- 2.00" DRILL DEPTH- 4.125" EDP# 71040 USES INSERT- MI 853L(USED INSERT INCLUDED) ORDERING CODE- MACH6-2000L CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. ... moreCOMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE
Last KAISER Carbide INSERT DRILL 2.438" 10.336.036 2-7/16" WCMT
Last one in stock! LISTING IS FOR A USED KAISER INSERT DRILL PART# 10.336.036 DIAMETER- 2.438" COUPLER- KAB6 DRILL DEPTH- 4.875" OAL- 6.496" USES INSERTS- WCMT 10(NOT INCLUDED) CONDITION- GOOD USED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION ... moreEND. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS
WAUKESHA SPADE BLADE DRILL HOLDER SERIES "E" 2" SHANK
LISTING IS FOR A USED WAUKESHA SPADE DRILL HOLDER STYLE- UNIVERSAL SERIES- E" SHANK- 2.00" FLUTE LENGTH- 10.00" OAL- 15.00" PART# 2050-300-F CONDITION- EXCELLENT USED Normal 0 Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT ... morePAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LI
AMEC 2.0" Diameter Spade Drill
AMEC 2.0" Diameter Spade Drill 2.0" Minimum Diameter AMEC 2T-4SR 15.5" OAL#4 Morse Taper Shank 9" Flute Length 3/8 Thick Insert Coolant Inducer Good Used Condition 34B
LIGHTLY USED INDEXABLE CARBIDE INSERT CORE DRILL 2.375"+/- (5187-2082) 2"-SHANK
LISTING IS FOR A INDEXABLE CARBIDE INSERT CORE DRILL WITH NEW INSERTS BRAND- CR MCT P/N- 5187-2082 DIAMETER- 2-3/8" +/ SHANK- 2.00" FLUTE LENGTH- 9" OAL- 14-1/2" COOLANT FED USED IN EXCELLENT CONDITION USES INSERTS- SNMG 434(3 NEW INSERTS ARE INCLUDED) Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. ... moreCOMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT M
HARDINGE 16C SPINDLE COLLET ADAPTER 1/2"
HARDINGE 16C SPINDLE COLLET ADAPTER 1/2" USED IN GOOD CONDITION WITH SOME SURFACE RUST
2-1/2 in. Drill Bit Morse Taper #5 (Inv. 25515)
2 1/2 in. Drill Bit Morse Taper#5 Drill length about 12 in. Replacement cost $1014 new. Loc. V28 Top(Inv. 25515) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject ... moreto a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
STARCUT 1459758, GUNDRILL COOLANT, 13 7/8" OAL, 0.609", 5 1/2" SHANK
STARCUT 1459758. GUNDRILL COOLANT, 13 7/8" OAL, 0.609" 5 1/2" SHANK Search STARCUT 1459758. GUNDRILL COOLANT, 13 7/8" OAL, 0.609" 5 1/2" SHANK. 13 7/8" Overall length. 0.609" 5 1/2" Shank. Grade- C-2. All measurements are approximate* No additional information for this product. Guaranteed not DOA. 355 DJ SW 5 07102012. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers, we combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please ... moreread description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction.Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Re
STARCUT 1465826, GUNDRILL COOLANT, 14 1/4" OAL, 0.375", 5 1/2" SHANK
STARCUT 1465826. GUNDRILL COOLANT, 14 1/4" OAL, 0.375" 5 1/2" SHANK Search STARCUT 1465826. GUNDRILL COOLANT, 14 1/4" OAL, 0.375" 5 1/2" SHANK. 14 1/4" Overall length. Size- 0.375" 5 1/2" Shank. Grade- 44A. All measurements are approximate* No additional information for this product. Guaranteed not DOA. 355 DJ SW 5 07102012. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers, we combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. ... morePlease read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction.Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damag
STARCUT 1582586, GUNDRILL COOLANT, 12 3/4" OAL, 0.326", 5 1/2" SHANK
STARCUT 1582586. GUNDRILL COOLANT, 12 3/4" OAL, 0.326" 5 1/2" SHANK Search STARCUT 1582586. GUNDRILL COOLANT, 12 3/4" OAL, 0.326" 5 1/2" SHANK. 12 3/4" Overall length. Size- 0.326" 5 1/2" Shank. Grade- 44A. All measurements are approximate* No additional information for this product. Guaranteed not DOA. 355 DJ SW 5 07102012. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers, we combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. ... morePlease read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction.Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damag
STARCUT 1464307, GUNDRILL COOLANT, 13" OAL, 0.350", 5 1/2" SHANK
STARCUT 1464307. GUNDRILL COOLANT, 13" OAL, 0.350" 5 1/2" SHANK Search STARCUT 1464307. GUNDRILL COOLANT, 13" OAL, 0.350" 5 1/2" SHANK. 13" Overall length. 0.350" 5 1/2" Shank. Grade- 44A. All measurements are approximate* No additional information for this product. Guaranteed not DOA. 355 DJ SW 5 07102012. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers, we combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description ... morein its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction.Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy
STARCUT 1463259, GUNDRILL COOLANT, 14 3/4" OAL, 0.318", 5 1/2" SHANK
STARCUT 1463259. GUNDRILL COOLANT, 14 3/4" OAL, 0.318" 5 1/2" SHANK Search STARCUT 1463259. GUNDRILL COOLANT, 14 3/4" OAL, 0.318" 5 1/2" SHANK. 14 3/4" Overall length. Size- 0.318" 5 1/2" Shank. Grade- C-1. All measurements are approximate* No additional information for this product. Guaranteed not DOA. 355 DJ SW 5 07102012. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers, we combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. ... morePlease read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction.Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damag
STARCUT 1348990, GUNDRILL COOLANT, 12 3/8" OAL, 0.332", 5 1/2" SHANK
STARCUT 1348990. GUNDRILL COOLANT, 12 3/8" OAL, 0.332" 5 1/2" SHANK Search STARCUT 1348990. GUNDRILL COOLANT, 12 3/8" OAL, 0.332" 5 1/2" SHANK. 12 3/8" Overall length. Size- 0.332" 5 1/2" Shank. Grade- C-1. All measurements are approximate* No additional information for this product. Guaranteed not DOA. 355 DJ SW 5 07102012. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers, we combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. ... morePlease read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received. So please contact us ASAP. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction.Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and we no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damag
Cleveland Twist Drill (2) (Inv. #15612)
Cleveland Twist Drill(2) Style Oil Hole Size 15/32 C8130-16B H8CTD WO:09564902 EDP#D37738(Inv. 15612) Loc.LRV3DS) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales ... moreare subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
Controx 234059 (2) EDP 234059 1/2 4 Flute Fine Rougher (Inv. 15624)
Controx 234059(2) EDP 234059 1/2 4 Flute Fine Rougher 18 deg. Rake 30 deg. Helix x 2.721 in. lead HSS CO. Made in Germany 0002962 1/2 in. Details(Speed/Feed) Fine Rougher- 234059- 1/2- 3 1/4- 1 1/4(Inv. 15624) Loc.LRV3DS) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method ... moreof payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f68d1ec4b-0xfd-
Eldorado .3770 x 22" Carbide Tipped Gun Drill 2 Flute
Eldorado.3770 x 22" Carbide Tipped Gun Drill 2 Flute.750" Shaft Coolant Through Tool All Gun Drills are New. New Sharp or Excellent Condition Each Drill will be Cleaned and Inspected Prior to Shipping Pic may not be of actual drill in listing but represents drill condition. If you need pic of actual drill email me at bratexllc@yahoo.com Questions? Call Robert at 607-259-5615
KOMET INDEXABLE DRILL - 5/8" DIA X 1 3/4" LOC X 7 1/4" OAL - HOLDS 2 W INSERTS
KOMET INDEXABLE DRILL V5731501 5/8" DIAMETER. 1 1/4" DIA SHANK, 1 3/4" LENGTH OF CUT, 7 1/4" OVERALL LENGTH 2 FLUTE DUAL COOLANT THRU HOLDS 2 WCMT INSERTS AS SHOWN MISSING BOTH SCREW USED- PLENTY OF LIFE DISTRIBUTOR'S OVERSTOCK 2 LBS ITEM V* ONLY ONE*
USED SANDVIK T-MAX INSERT DRILL 2.205" 56.00mm LEFT HAND L416.1-0560-20-05
LISTING IS FOR A USED SANDVIK INSERT DRILL T-MAX INSERT U-DRILL- TYPE 05 DRILLING DIAMETER 2.205" 56.00mm LEFT HAND CUT MAX. HOLE DEPTH 2.5 X 2.205" PART# L416.1-0560-20-05 OVERALL LENGTH 9.055" SHANK DIAMETER 1.574" COOLANT THROUGH DRILL USES INSERTS WCMX 08 04 12(NOT INCLUDED) CONDITION- VERY GOOD USED LAST ONE IN STOCK! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING ... moreIF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HAN
USED KAISER KAB 2.750" Carbide INSERT DRILL 2-3/4" (10.336.039) KAB-7
LISTING IS FOR A USED KAISER KAB INSERT DRILL BR AND- KAISER CATALOG NO. 10.336.0 39 D RILL DIAMETER- 2.750" DRILL DEPTH- 5.500" SHANK/ C O UPLER- KAB7 USES I NSERT- WC. 10(NOT INCLUDED) INSERT CATALOG N O. 10.655.670 INSERTS NOT INCLUDED CONDITION- GOOD USED SOME SCORING ON FLUTES Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED ... moreSHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE
GUHRING PCD DRILL 7.2 X 12.015 X 13.65 X 18MM CARBIDE
Condition: USED SHARP GUHRING PRESSURE COOLANT DELIVERY REAMER BIT SOLID CARBIDE WITH LASER ERODED CUTTING TEETH SHARP. MAIN BORE DIAMTER IS 7.2 MM. COUNTERSINKS AT THE NEXT LEVEL TO 12.015 MM DIA. HAS ANOTHER STEP ABOVE THAT TO REAM THE EDGES OF THE COUNTERSINK@13.65 TO 18MM. VERY NICE BIT PRESSURE COOLANT DELIVERY WITH 3 PORTS FOR EACH OF THE 2 STRAIGHT FLUTES 1C24071002-PCD. SHIPS FAST CHECK OUR FEEDBACK Powered by The free listing tool. List your items fast and easy and manage your active items.
USED KOMET ABS-63 carbde INSERT COOLANT DRILL 54.00mm (2.125") ABS63
LISTING IS FOR A USED KOMET INSERT DRILL BRAND- KOMET ORDER NO. V1335400 DESCRIPTION- ABS 63 KUB1/54/108-R48 DIAMETER- 54.00mm(2.125" FLUTE LENGTH- 4.250" COUPLER- ABS63 USES INSERTS- W29 42010.04. NOT INCLUDED) CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS ... moreDAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE.
Help