|
SECO INSERT DRILL 1.000 DIA. COOLANT THRU SD503-1000-300-1250R7 LOT C2092
SquareTrade © AP6.0 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A SECO SD503-1000-300-1250R7 1.000" DIAMETER COOLANT THRU INSERT DRILL WITH 1-1/4" DIA. SHANK. FLUTE LENGTH: 3.00" OVERALL LENGTH: 6-1/2" NOTE PICTURE OF END OF DRILL HAS SOME DAMAGE AS SHOWN. WE ALSO HAVE MORE COOLANT THRU INSERT DRILLS LISTED AND LISTING MORE PLEASE TAKE A LOOK AT OUR OTHER ITEMS WE HAVE LISTED. Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL US AT 937-672-9876. Be sure to add me to your! ka.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%60wk6%3Eka-13e0df3db8b-0xf2-
|
|
|
LIGHTLY USED BUTTERFIELD USA S/SHANK COOLANT DRILL 1-5/16" HSS 1.3125"
LISTING IS FOR A LIGHTLY USED STRAIGHT SHANK COOL ANT DRILL BRAND- B U TTERFIELD MADE IN THE USA DIAMETER- 1-5/16" FLUTE LENGTH- 8.50" OAL- 14.250" SHANK- 1.312" CONDITION- VERY L IGHTLY USED DRILL IS SHARP Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ... moreARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTIO
|
|
|
Lot #21 Mitsubishi TAGM 1875 1.875 DIAM. INDEXABLE / COOLANT THRU DRILL USED.
Hello. Welcome to my auction. All items come to you from a closed machine shop auction. All items are in used condition unless otherwise stated. Now I am going to be listing some Indexable Drills that cam e from the auction. All of these drills have been used and have some form of ru b marks on them from running them. Everyone who runs indexable drills knows that usually chips can build up a nd cause rub marks on the flutes of the drills. With that said I will lis t all of the information below that is available and visible on the drills. Manufacturer: Mitsubishi Part# TAGM 1875 DRILL DIAMETER: 1.875 S HANK DIAMETER: 1.500 O VERALL LENGTH: 11.00 DRILL DEPTH: 6.00
|
|
|
KENNAMETAL COOLANT FED INDEXABLE DRILL W/ 1-1/4" SHANK - 1-3/8" - #CF1071885
aims KENNAMETAL COOLANT FED INDEXABLE DRILL W/ 1-1/4" SHANK- 1-3/8" CF1071885 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Kennametal. This is a Coolant Fed Indexable Drill in good condition. Model# CF1071885 Features: Used for deep hole drilling. Specifications: Current Cutting Diameter: 1-3/8" Shank: 1-1/4" Flutes: 3. Flute Length: 4" Overall Length: 8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNAMETAL COOLANT FED INDEXABLE DRILL W/ 1-1/4" SHANK- 1-3/8" ... moreCF1071885 KENNAMETAL COOLANT FED INDEXABLE DRILL W/ 1-1/4" SHANK- 1-3/8" CF1071885 Reliable Tool Inc. c 2011 | Powered by
|
|
|
32.5mm Coolant Fed Tip spindle Feeding Straight shank Drill bit Metric 32-1/2mm
Item. Coolant fed Drill Bit Size. Metric 32.5 mm Manufacturer. TRW twist drill USA Type. Straight shank coolant through with drawbar threads. HSS Shank. 32.69mm Flute Length. 6" Overall Length. 11" Condition. Resharp. Like NEW This is not an actual photo but it is pretty much just like the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from ... moremy ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but there will be a $4 packing fee in addition to actual shipping costs. So please do not send payment until I send you a total. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! Pay me securely with any major credit card through PayPal! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
|
|
|
iscar insert drill .coolant thru.5/8 shank & 2 inserts.1 new & 1 used.
comes with 1 new insert@ 425& 1 used 10 mm insert. will combine shipping.
|
|
|
USED KAISER Carbide INSERT COOLANT DRILL 1.00" (10.336.009) 1" KAB6 (WCMX)
LISTING IS FOR A KAISER INSERT DRILL BRAND- KAISER PART# 10.336.009 DIAMETER- 1.00" COUPLER- KAB6 DRILL DEPTH- 2.00" LENGTH FROM BOTTOM OF FLANGE TO TOP OF DRILL- 3.543" USES INSERTS- WCMX 04& WCMX 05(NOT INCLUDED) CONDITION- GOOD USED WE ARE UNABLE TO REMOVE ONE INSERT LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR ... moreA COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU
|
|
|
1-5/32" or 1.1562" COOLANT HOLE DRILL-C-L. HSS MADE IN USA- GREAT CONDITION
1-5/32" or 1.1562" COOLANT HOLE DRILL-C-L. HSS MADE IN USA- GREAT CONDITION. O.D. 1-5/32" or 1.1562" O.A.L. 11.000" FLUTE L. 5.250" ALL MY TOOLING COMES FROM AIRCRAFT AND AEROSPACE MANUFACTURERS AND IS THE BEST OF THE BEST. I COMBINE SHIPPING AND INCLUDE A BONUS ON ALL MULTIPLE ORDERS. IF YOU DON'T SEE WHAT YOU NEED. CONTACT ME, I'M SURE WE HAVE IT AND WILL POST IT JUST FOR YOU(WE HAVE EVERYTHING FROM INSERT SCREWS TO CNC MACHINE CENTERS) MOST PRICES ARE WELL UNDER HALF OF RETAIL SOME ARE IN THE 1/100th's. ALL ORDERS USUALLY SHIP THE SAME DAY, NEXT DAY AT THE LATEST, VERY CAREFULLY PACKAGED AND IF YOU NEED IT FASTER, JUST ASK. THANKS FOR CHECKING OUT MY TOOLING AND PLEASE LOOK AT THE REST FOR MORE PENNY ON THE DOLLAR DEALS AT MY ebay STORE:
|
|
|
COOLANT FED INDEXABLE SPADE DRILL HOLDER W/ 1-1/2" SHANK - 1.686" DIA.
aims COOLANT FED INDEXABLE SPADE DRILL HOLDER W/ 1-1/2" SHANK- 1.686" DIA. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Coolant Fed Indexable Spade Drill Holder in good condition. Features: Used for deep hole drilling. Specifications: Current Cutting Diameter: 1.686" Shank: 1-1/2" round) Flute Length: 4" Overall Length: 7-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. COOLANT FED INDEXABLE SPADE DRILL HOLDER W/ 1-1/2" SHANK- 1.686" DIA. Reliable Tool Inc. c 2011 | Powered ... moreby
|
|
|
USED KENNAMETAL carbide INSERT COOLANT DRILL 38.00mm KSEM380R5WD50M 1.4961"
LISTING IS FOR A USED KENNAMETAL INSER T COOLANT DRILL BRAND- KENNAMETAL PART# KSEM380R5WD50M DIAMETER- 38.00mm(1.4961" MAX CUT DEPTH- 5XD 7.48" 190.00mm) OAL- 318.00mm(12.50" SHANK- 50.00mm(1.96" USES INSERTS- KSEM ONE USE D 38.00mm INSERT IS I NCLUDED CONDITI ON- GOOD USED SOME MINOR SURFACE RUST ON FLUTE LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO ... more2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT
|
|
|
2 1/2" Vallenite Indexable Carbide Insert Coolant Drill wit 2" Shank, Real Nice
Large Indexable Drill Vallenite 2 1/2" with 2" Shank with Coolant Thru. Numbers on Drill are: VWDR-250-200-931A, VALU-U-DEX HP, 2.500 DIA, WC-52.5, PT-5467, 6T8, Real nice condition, Free shipping in USA ONLY. Serious offers accepted at time of offer. All others will be considered.
|
|
|
ingersoll insert drill .coolant thru with 2 tips 1 new @.740,1 used @.752
with 2 tips. will combine shipping.
|
|
|
USED SHARP HSS TAPER SHANK COOLANT DRILL 1-13/64" #4MT 1.2031"
LISTING IS FOR A USED TAPER SHANK CO OLANT DRILL BRAND- SIZE- 1-13/64" FLUTE LENGTH- 7.00" OAL- 13.00" SHANK- 4MT COOLAN T TH RU CONDI TION- GOOD USED DRILL IS SHARP! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, ... moreMASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE C
|
|
|
1-1/4" HS COOLANT FED DRILL #4 MORSE TAPER USED
1-1/4" HIGH SPEED COOLANT FED DRILL USED T HESE ARE HIGH QUALITY DRILLS THEY WERE OBTAINED FROM A CLOSED GM PLANT IN FLINT. MI#4 MORSE TAPER SHANK 1-1/4" TOTAL LENGHT IS APX. 13-7/8" THIS ITEM HAS BEEN STORED FOR APX. 10 YEARS PLEASE SEE PHOTOS FOR CONDITION OF THIS DRILL THANKS FOR LOOKING AISLE X#162
|
|
|
3" dia. indexable insert coolant drill, 2 1/2" shank, 13" long
Here is an indexable insert coolant drill. It is approx. 3" diameter. Has a 2 1/2" dia. shank, and is 13" long. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. All international shipments will be through the U.S. post office ONLY. Sales tax is charged for PA sales unless exempt*
|
|
|
YG-1 P14102 Spade Drill Holder .703" to .937" Coolant Fed (Excellent)
YG-1 Coolant Fed Intermediate Spade Drill Holder(P14102) Drill Insert Range: 703" to.937" Shank Diameter: 1" Max Drilling Depth: 4-5/8" Overall Length: 8-7/8" Type: Straight Shank and Flute Made in USA This item is in excellent condition and might be new. Will ship out one day after receipt of payment.
|
|
|
COOLANT FED 1-1/4 STRAIGHT SHANK OIL TUBE DRILL HS EXCELLENT USED CONDITION
WE HAVE 2 PC OF THESE BLACK OXIDE D COOLANT FED DRILLS. THEY LOOK NEW IN MANY RESPECTS. BUT ARE GENTLY USED.BOTH A A COUPLE SMALL NICKS IN EDGE OF FLUTE ABOUT HALF WAY UP. THIS WILL NOT INTERFERE WITH FUNCTION,AND IS $200. CHEAPER. THEY HAVE BEEN SHARPENED+USEABLE RIGHT OUT OF THE BOX. THEY ARE ABOUT 12 INCH LONG. AFTER PAYPAL PAYMENT WE SHIP TO CONTINENTAL USA ONLY. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e59b4d72e-0x103-
|
|
|
L64 - Huge Drill Bit Lot 17pcs COOLANT 3/4, 1 3/16 end mill morse - NO Reserve
Lot 64 Drill Bit Lot 17pcs Some of these are Coolant Through Drill Bits 6 pcs are 3/4in Coolant Through 1pcs Morse 1 3/16 Coolant and couple other Sizes in this Lot Shipping is only $20 Please Check out our other Great Ebay Deals on Tooling- HUGE TOOLING SALE
|
|
|
Allied 24040S-175L Spade Drill Holder 1-29/32" to 2-9/16" Coolant Fed
Allied Coolant Fed Spade Drill Holder(New Model# 24040S-175L/ Old Model# 244T-1750) Drill Insert Range: 1-29/32" to 2-9/16" Shank Diameter: 1-3/4" 2" with sleeve) Shank Length: 4" Max Drilling Depth: 9-1/8" Overall Length: 14-1/2" Type: Straight Shank and Flute This item is in good condition and comes as shown with shank sleeve and additional used 2-1/4" inserts. Will ship out one day after receipt of payment.
|
|
|
USED SECO carbide INSERT COOLANT DRILL 1.417" (36.00mm) R416.19-32360
LISTING IS FOR A USED SECO INSERT DRILL BRAND- SECO MADE IN SWEDEN PART# R416.19- 32360 DIAMETER- 1.417" 36.00mm) DRILL DEPTH- 4.252" SHANK- 1.260" 32.00mm) OAL- 7.913" USES INSERTS- WCMX 06 T308 and SPMX 12T 3AP(NOT INCLUDED) CONDITION- GOOD USED UNABLE TO REMOVE ON INSERT LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS ... moreA COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES T
|
|
|
VALENITE 1.969" (50mm) INDEXABLE COOLANT-THRU DRILL BIT TOOL HOLDER & INSERTS
This is a used VALENITE indexable drill bit with coolant thru capacity. Part number reads: VWDR-196-150-748. Good condition with used inserts attached. Shank dimensions etc. are shown in the pics. Great quality tool! Don't miss it as it includes super fast FREE Priority mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the ... moreitem being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
|
|
|
Allied 23020H-125F Spade Drill Holder 31/32" to 1-3/8" Coolant Fed
Allied Coolant Fed Intermediate Spade Drill Holder(23020H-125F) Drill Insert Range: 31/32" to 1-3/8" Shank Diameter: 1-1/4" Max Drilling Depth: 5-3/8" Overall Length: 9-11/32" Type: Flanged Shank Helical Flute Made in USA This item is used and comes as shown. Will ship out one day after receipt of payment. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e69a39d07-0x102-
|
|
|
CLEFORGE 1 1/8 THRU-COOLANT DRILL BIT
CLEFORGE 1 1/8 THRU-COOLANT DRILL BIT. MODEL 101205. IT MEASURES 12 INCHES LONG.OTHER SIZES ARE AVAILABLE 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e6e7108eb-0x103-
|
|
|
USED WAUKESHA WALTER INSERT COOLANT DRILL 44.00mm ABS-50 (1.732") 8160-5044M
LISTING IS FOR A WAUKESHA WALTER INSERT DRILL WI TH ABS SHANK BRAND- WAUKESHA WALTER PART# 8160-5044M DIAMETER- 44.00mm DRILL DEPTH- 5.79" SHANK- ABS-50 COMPA TIBLE WITH KOMET HOLDERS COOLANT THRU USES INSERTS- COR-BOR SIZE"6" CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST ... moreBE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITH
|
|
|
Sandvik A416.1-803-M-1 indexable insert coolant drill
Here is a Sandvik Coromant indexable insert coolant drill. It is 38mm? diameter. 2" shank, and 13" OAL. The P/N is A416.1-803-M-1. The bearing is bad. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. All international shipments will be through the U.S. post office ONLY. Sales tax is charged for PA sales unless exempt*
|
|
|
Carboloy 22 QDR-05, 1 3/8"? insert coolant drill
Here is a Carboloy 22 QDR-05 1 3/8" diameter indexable insert coolant drill. It has an 1 1/4" shank and is 9 3/4" long overall. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. All international shipments will be through the U.S. post office ONLY. Sales tax is charged for PA sales unless exempt*
|
|
|
Sandvik 1 3/16"? indexable insert coolant drill
Here is a Sandvik Coromant coolant drill. It is 1 3/16" diameter. 1 1/2" shank, and 10 1/4" OAL. The P/N is R416.1-0300-20-04. The bearing is bad. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. All international shipments will be through the U.S. post office ONLY. Sales tax is charged for PA sales unless exempt* ao5pta.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bisk%3Eao5pta-13e6e71caf2-0xf6-
|
|
|
Carboloy 31 QDR-06 insert coolant drill, 1 15/16"
Here is a Carboloy 31 QDR-06 indexable insert coolant drill. It is 1 15/16" dia. 1 1/2" shank, and 11 5/8" OAL. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. All international shipments will be through the U.S. post office ONLY. Sales tax is charged for PA sales unless exempt* 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e6e71cb30-0x101-
|
|
|
YG-1 P15Z01 Spade Drill Holder .437" to .500" Coolant Fed (Excellent)
YG-1 Coolant Fed Z Series Spade Drill Holder(P15Z01) Drill Insert Range: 437" to.500" Shank Diameter: 3/4" Max Drilling Depth: 2-3/8" Overall Length: 5-17/32" Type: Straight Shank and Flute Made in USA This item is in excellent condition. Will ship out one day after receipt of payment.
|
|
|
CNC Coolant Through Carbide Brazed Drill Lot (2) 1 1/64 - 1.0156
Lot of 2 CNC carbide brazed tipped coolant through drills. Drills are in used condition some being better than others. But all in good condition. Carbide tips can be re-sharpened many more times. 1 1/64- 1.0156
|
|
|
8.839x406mm Ingersoll Brazed 1 Flute Coolant Carbide Tip Gun Drill Regrind .348"
Ingersoll 8.839mm x 406mm Gun Drill This is REGROUND. New in sharpness. Gun Drill from Ingersoll. Has been reground professionally and calibrated. Will have some regrinding brand engraving and set screw marks. Some milled off, but won't affect performance. Specifications: Brand: Ingersoll Tooling Type: Qwik Gun Drill Shank: 3/4.75" Whistle Chip Cutting Tip: 2 Hole Solid Carbide Head Length: 1.378" Cutting Diameter: 8.839mm(3479" Cutting Length: 406mm( 16" PAYMENT& SHIPPING- All bids must be paid within 10 days from the closing of the auction. If the buyer has not paid by that time, and contact has not been made, we will file an unpaid item case. Winning bidder agrees to pay amount listed(USD) to cover shipping and handling. We will ship your item(s) after your payment has been cleared. To a confirmed address. If ... morean item arrives damaged from shipping. Keep everything sent to you, and contact us within 14 days after receiving item and we'll fix it. ` F9 FEEDBACK& QUESTIONS- We will submit feedback only on those who have filed feedback on us. If you are satisfied with your transaction with us. Please leave your comment and we will be sure to reciprocate, promptly. Please contact us with any questions or concerns before leaving neutral or negative feedback, we will ensure complete customer satisfaction. For questions. Alternate payment or shipping methods. Call: 620.757.1333. Tue-Sat: 12PM to 8PM CST-
|
|
|
Valenite VAL-U-DEX 1" Indexable Coolant Fed Drill VSDR-100-125-0812
Valenite VAL-U-DEX I ndexable Coolant Fed Drill( VSDR-100-125-0812) Drill Diameter: 1" Shank Diameter: 1-1/4" Flute Length: 3" Overall Length: 8" Direction: Right Hand This item is used and comes as shown. Will ship out one day after receipt of payment.
|
|
|
Allied 21020S-125F Stub Spade Drill Holder 31/32" to 1-3/8" Coolant Fed
Allied Coolant Fed Stub Spade Drill Holder( EDP# 21020S-125F) Drill Insert Range: 31/32" to 1-3/8" Shank Diameter: 1-1/4" Max Drilling Depth: 2-1/4" Overall Length: 5-49/64" Type: Flanged Shank and Straight Flute Made in USA This item is in good condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
WAUKESHA COOLANT FED INDEXABLE SPADE DRILL TOOL HOLDER w/ 1" SHANK - 1-1/2" DIA.
aims WAUKESHA COOLANT FED INDEXABLE SPADE DRILL TOOL HOLDER w/ 1" SHANK- 1-1/2" DIA. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Waukesha Cutting Tools. This is a Coolant Fed Indexable Spade Drill Holder in good condition. Series# B Model# 2050-0132F 417 Features: Used for deep hole drilling. Specifications: Current Cutting Diameter: 1-1/2" Shank: 1" round) Flute Length: 8" Overall Length: 12-3/4" Comes as shown in pictures. ... moreCheck out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. WAUKESHA COOLANT FED INDEXABLE SPADE DRILL TOOL HOLDER w/ 1" SHANK- 1-1/2" DIA. WAUKESHA COOLANT FED INDEXABLE SPADE DRILL TOOL HOLDER w/ 1" SHANK- 1-1/2" DIA. Reliable Tool Inc. c 2011 | Powered by
|
|
|
Thru Coolant Carbide Inserted 1 3/4" diam x 4" long Drill
Thru Coolant Carbide Inserted 1 3/4" diam x 4" long Drill 1 1/2" diam Shank Overall Lenght 7 1/4" Diam is approx there are no markings ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3497 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
SECO SD504 Coolant Feed Indexable Drill. 2-1/4" Diameter w/ 2 boxes of inserts
You are purchasing ONE SECO SD504 Coolant Feed Indexable Drill. 2-1/4" Diameter w/ 2 boxes of inserts. The drill has been lightly used but is in great condition. The inserts are brand new. You are getting a box of SCGX 150512-P2. T3000D Inserts and a box of SPGX1904-C1, T400D.
|
|
|
1-13/16" Diameter Coolant Fed Feeding Twist Drill bit 15 Long USA Straight shank
Item. Coolant fed SPLIT POINT Tip Drill Bit Size. 1.812" Cutting dia. Manufacturer. UB Twist Drill Co US Made in the USA CLE-FORGE Type. Straight shank coolant through with APPROX. 5/8" RIGHT HAND fine drawbar threads. HSS Shank. 1.812" straight with 1 Flat spot Flute Length. 9-1/2" Overall Length. 15" Condition. Super sharp. I just peeled the plastic off the tip for the photo, looks like it has only been used one time, but the drawbar threads are somewhat corroded from shelf time. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship ... morethem in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! Pay me securely with any major credit card through PayPal! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my eb
|
|
|
USED INGERSOLL CARBIDE INSERT COOLANT DRILL 1.687" (2"-SHANK) A16806723RS1
LISTING IS FOR A USED CARBIDE INSERT DRILL BRAND- INGERSOLL PART# A16806723RS1 DIAMETER- 1.687" FLUTE LENGTH- 6.750" OAL- 12.687" USES INSERTS- WXEG32-01(NOT INCLUDED) CONDITION- VERY LIGHTLY USED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION ... moreEND. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS AB
|
|
|
SANDVIK COROMANT 1-1/2" INDEXABLE COOLANT FED DRILL w/ 1-1/2" SHANK + INSERTS
aims SANDVIK COROMANT 1-1/2" INDEXABLE COOLANT FED DRILL w/ 1-1/2" SHANK + INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Sandvik Coromant. Model# RA416.1-1500-40-55 D1.500 This is an Indexable Coolant Fed Drill in Good condition. Specifications: Cutting Diameter: 1-1/2" Shank: 1-1/2" Straight. Flute Length: 6-1/2" Overall Length: 11-1/2" Comes as shown In pictures. Check out the photos! if you have any ... moreother questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SANDVIK COROMANT 1-1/2" INDEXABLE COOLANT FED DRILL w/ 1-1/2" SHANK + INSERTS SANDVIK COROMANT 1-1/2" INDEXABLE COOLANT FED DRILL w/ 1-1/2" SHANK + INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
GKI KOMET 1.750" KUB IT-HD Trigon Indexable Coolant Fed Drill
GKI KOMET KUB IT-HD Trigon Indexable Drill. Drill Diameter: 1.750" Drilling Depth: 4.000" Shank Diameter: 1.500" Shank Length: 5" Overall Length: 10-3/4" Inserts Required: 2 Cutting Direction: Right Coolant Fed: Yes This item is used and comes as shown. Will ship out one day after receipt of payment.
|
|
|
COOLANT FED INDEXABLE SPADE DRILL W/ 1.239" SHANK
aims COOLANT FED INDEXABLE SPADE DRILL W/ 1.239" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. This is a Coolant Fed Indexable Spade Drill in good condition. Features: Excellent cutting performance in wide range of boring size even at vibration cutting condition. Applied for various workpiece such as steel. Stainless steel, cast iron, etc. Assures longer tool life and excellent surface finish. Specifications: Current Cutting Diameter: 1-1/2" Shank: ... more1.239" Clamping System: Screw On. Flute Length: 3" Overall Length: 5-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. COOLANT FED INDEXABLE SPADE DRILL W/ 1.239" SHANK COOLANT FED INDEXABLE SPADE DRILL W/ 1.239" SHANK Reliable Tool Inc. c 2011 | Powered by ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13eba7a2f1f-0xf6-
|
|
|
USED KOMET carbide INSERT COOLANT DRILL 1.164" ABS-50 (UV0202610) W29.24010
LISTIN G IS FOR A USED KOMET ABS-50 INSERT DRILL BRAND- KOM ET ORDER NO. UV0202610(2018-7277) SIZE- 1.164" FLUTE LENGTH- 2.00" COUPLER- ABS-50 USES INSERTS- W29 24010.04. NOT INCLUDED) CONDITI ON- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. ... moreWE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTION
|
|
|
Muskegon Series D Spade Drill Holder 1-3/4" Shank Coolant Fed (13312)
Muskegon Series D Spade Drill Holder(13312) Minimum Insert Size: 2" Shank Diameter: 1-3/4 Flute Length: 9" Overall Length: 13-1/4" Type: Straight Shank and Flute Coolant Fed: Yes Made in USA This item is in good condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
Allied 220Z0S-075L Spade Drill Holder 7/16" to 1/2" Coolant Fed w/ Insert
Allied Coolant Fed Short Spade Drill Holder(220Z0S-075L) Drill Insert Range: 7/16" to 1/2" Shank Diameter: 3/4" Max Drilling Depth: 1-1/4" Overall Length: 4-13/32" Type: Straight Shank and Flute Made in USA This item is used and comes as shown. Will ship out one day after receipt of payment. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13ecd6afa5f-0xf5-
|
|
|
YG-1 P13001 Spade Drill Holder .515" to .687" Coolant Fed w/ Insert
YG-1 Coolant Fed 0 Series Spade Drill Holder(P13001) Drill Insert Range: 515" to.687" Shank Diameter: 3/4" Max Drilling Depth: 1-3/8" Overall Length: 4-9/16" Type: Straight Shank and Flute Made in USA This item is in good condition and comes with 16mm insert shown. Will ship out one day after receipt of payment.
|
|
|
YG-1 P13102 Spade Drill Holder .703" to .937" Coolant Fed w/ Insert
YG-1 Coolant Fed Short Spade Drill Holder(P13102) Drill Insert Range: 703" to.937" Shank Diameter: 1" Max Drilling Depth: 2-5/8" Overall Length: 5-3/4" reduced from 6-7/8" Type: Straight Shank and Flute Made in USA This item is in good condition and comes as shown with a shortened shank and a 22mm insert. Will ship out one day after receipt of payment.
|
|
|
Allied 20621-1000 Spade Drill Holder 1-1/4" to 1-3/4" Coolant Fed (B-100-100)
Allied Coolant Fed Spade Drill Holder(EDP# 20621-1000/ B-100-100) Drill Insert Range: 1-1/4" to 1-3/4" Shank Diameter: 1" Flute Length: 3-1/2" Overall Length: 7" Type: Straight Shank and Flute Made in USA This item is in good condition and comes with 1-5/16" insert shown. Will ship out one day after receipt of payment.
|
|
|
Komet 1-1/2 dia. 5" flute. indexable coolant drill with inserts
Komet 1-1/2 dia. 5" flute. indexable coolant drill with inserts
|
|
|
valenite 1.2"dia. 4"flute indexable coolant drill
valenite 1.2"dia. 4"flute indexable coolant drill
|
|
|
DEAL! WAUKESHA 1.375" INDEXABLE COOLANT FED DRILL W/ ABS-50 MOUNT - 8160-0124F
Made in Waukesha Cutting Tools. Inc. This is an Indexable Coolant Fed Drill in used condition. This drill is very lightly used. Or possibly not used at all. It has been in a tool crib so has many scuffs and marks on it as well as some areas of light surface rust. Please inspect the photos. No inserts or storage tube are included in this sale. Model# 8160-0124F Specifications: Drilling Diameter: 1.375" Shank: ABS 50 Overall Length: 6.91" Comes as shown in pictures. 17
|
|
|
COOLANT FED INDEXABLE SPADE DRILL w/ 1" SHANK + BLADES
aims COOLANT FED INDEXABLE SPADE DRILL w/ 1" SHANK + BLADES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Coolant Fed Indexable Spade Drill with Extra Blades in good condition. Features: Excellent cutting performance in wide range of boring size even at vibration cutting condition. Applied for various workpiece such as steel. Stainless steel, cast iron, etc. Assures longer tool life and excellent surface finish. Specifications: Current Cutting Diameter: 1-1/4" Shank: 1" Flute Length: 3" Blade Sizes: 1-1/4" 1-1/2" Overall Length: 7" Clamping System: Screw On. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check ... moreout our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. COOLANT FED INDEXABLE SPADE DRILL w/ 1" SHANK + BLADES Reliable Tool Inc. c 2011 | Powered by
|
|
|
USED WALTER carbide INSERT COOLANT DRILL 1.250" B3213.U5F.0318.Z01.095R (1-1/4")
LISTING IS FOR A USED WALTER INSERT DRILL BRAND- WALTER PART# B3213.U5F.0318.Z01.095R DIAMETER- 1.250" FLUTE LENGTH- 3.750" OAL- 8.880" SHANK- 1.250" USES INSERTS- P284. 4(NOT INCLUDED) CONDITION- GOOD USED SOME MINOR SURFACE RUST Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN ... more7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF
|
|
|
indexable carbide insert drill through hole coolant 1 1/2" shank drill body .900
indexable carbide insert drill through hole coolant 1 1/2" shank drill body.900" depth of cut 2 1/2" No combined shipping and handling discount Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Indexable Spade Drill , Through Coolant 3/4" Shank drill body diameter 1/2"
Indexable Spade Drill. Through Coolant 3/4" Shank drill body diameter 1/2" No combined shipping and handling discount Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Kennametal METCUT 1.500" Coolant Fed Indexable Drill (272-0150)
Kennametal/ METCUT Negative Rake Indexable Drill(272-0150) Drill Diameter: 1.5000" Shank Diameter: 1.250" Drilling Depth: 2.250" Overall Length: 7.750" Direction: Right Hand Inserts Required: 2 Compatible Inserts: B-500-BD This item is in very good condition and comes as shown. Will ship out one day after receipt of payment. ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13f3a5808fc-0xf0-
|
|
|
COOLANT FED CARBIDE TIPPED GUN DRILL - 1-1/4" DIAMETER
aims COOLANT FED CARBIDE TIPPED GUN DRILL- 1-1/4" DIAMETER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a used Carbide Tipped Coolant Fed Gun Drill in good condition. Specifications: Drill Diameter: 1-1/4" Shank Diameter: 1-1/2"OD- 3/8"ID Length of Cut: 28" Overall Lengths: 31-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. COOLANT FED CARBIDE TIPPED GUN DRILL- 1-1/4" DIAMETER COOLANT FED CARBIDE TIPPED GUN DRILL- 1-1/4" DIAMETER Reliable Tool Inc. c 2011 | Powered by
|
|
|
KOMET KUB Trigon Carbide Insert Coolant Drill ABS 50 V30 338 W2934/1.500/3.000 R
Used. Nice Shape. No Inserts provided. Shipped free only to lower 48. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f4e3dad92-0xfd-
|
|
|
KENDEX METCUT COOLANT THRU INSERT DRILL 2-1/2" DIA 2" SHANK 4" LONG LOT C3101
LOT# C3101 WE ARE OFFERING A KENDEX METCUT COOLANT THRU INSERT DRILL MADE IN USA KENDEX METCUT 2-1/2"DIA 2" SHANK 4" LONG YOU WILL RECEIVE AS SHOWN IN PICTURES ANY QUESTIONS PLEASE CALL 937-320-2298 CHECK OUT! ADD TO YOUR!
|
|
|
1-27/32 cut 1/4" Thick SPADE Drill bit Cutter Tip Insert Coolant fed Tin Coated
Item. SPADE Drill Bit Cutting Tip for coolant feeding indexable drill Tool Holder Manufacturer. Unknown. Might be made by AMEC Allied Machine and Engineering Corp USA Made in the US America 1.843" or so Diameter. On the bit it says 1.844" 1/4" Locating area Type. Not sure if it is hss or Cobalt steel Series. N/A Condition. Nice and sharp. Resharpened and still coated in plastic. Split point tip Tin Coat This is not an actual photo but it is pretty much identical to the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when ... moreI first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! Pay me securely with any major credit card through PayPal! I do not add my zip code to address below because they might change our zip code A
|
|
|
Kendex 2 inch drill Metcut 1-3/4 shank Carbide Coolant through drill
LISTING IS FOR A KENDEX METCUT INSERT DRILL Yes it has a little burn on one edge does not effect the use. Man this puppy worked great I personally used this with out Mazak lathe. Thank you and God Bless! P/N- 270-0200 DIAMETER- 2.00" SHANK DIAMETER- 1.750" EFFECTIVE DRILL DEPTH- 5.50" OAL- 10.75" USES INSERTS- SNMG(NOT INCLUDED) COOLANT FED CONDITION- GOOD USED
|
|
|
INGERSOLL DRILL-MAX 1 1/4" COOLANT-FED INSERT DRILL
INGERSOLL DRILL-MAX 1 1/4" COOLANT-FED INSERT DRILL- INGERSOLL DRILL-MAX 1 1/4" COOLANT-FED INSERT DRILL INVENTORY# 4644 MODEL: A11204521RS1 71519-L SPECIFICATIONS: SHANK DIAMETER: 1 1/4" SHANK LENGTH: 3 1/2" DRILL LENGTH: 5 1/4" FLUTE LENGTH: 4 1/2" DRILL DIAMETER: 1 3/32" WEIGHT: 2 LBS DESCRIPTION: FOR DRILL-MAX HOLDERS WITH 1 1/4" CAPACITY HOLDS(2) CARBIDE INSERTS- NOT INCLUDED GOOD CONDITION- SOLD AS PICTURED CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's ... morespecifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off single phase power! DISCLAIMER: The information and pictures are believed to be accurate to the best of our knowledge. Obtained from sources deemed reliable. However, we do not guarantee accuracy of information and cannot be responsible for any errors or omissions. An inspection should be made. The information on the web site should not be used for formal quotation. Price and information presented in the write ups
|
|
|
SANDVIK COROMANT 1 1/4" COOLANT-FED INSERT DRILL
SANDVIK 1 1/4" COOLANT-FED INDEXABLE INSERT DRILL SYSTEM- SANDVIK COROMANT 1 1/4" COOLANT-FED INDEXABLE INSERT DRILL SYSTEM INVENTORY# 4642 MODEL: COROMANT 416.1 DESCRIPTION: COOLANT-FED SYSTEM FOR INDEXABLE INSERT DRILL REQUIRES LESS HORSEPOWER THAN STANDARD DRILLS. POSITIVE RAKE GEOMETRY FOR DRILLING ON ALL TYPES OF MACHINES SPECIFICATIONS: DRILL HOLDER: MODEL: A 416.1-809-6 INSIDE DIAMETER: 1 1/4" SHANK DIAMETER: 2" LENGTH: 7 1/2" WEIGHT: 6 1/2 LBS INDEXABLE INSERT DRILL: MODEL: R-416.1-0380-20-04 SHANK SIZE: 1 1/4" D DRILL DIAMETER: 1 1/2" DRILLING DEPTH: 4 1/2" OVERALL LENGTH: 6 3/4" WEIGHT: 2 LBS FEATURES: FASTER. MORE PROFITABLE PRODUCTION IN SHOP HELICAL FLUTE. CLEAN THROUGH-HOLE CUTTING AND EFFICIENT CHIP REMOVAL. POSITIVE LOCK-SCREW MOUNTING FOR GREATER STABILITY DURING PRODUCTION COOLANT ... moreTHROUGH THE TOOL SYSTEM INCLUDES: 1) 1 1/4" HOLDER(1) INDEXABLE INSERT DRILL(2) TRIANGULAR. POSITIVE RAKE INSERTS GOOD CONDITION- SOLD AS PICTURED FOB OUR WAREHOUSE CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 y
|
|
|
USED TRW STRAIGHT SHANK COOLANT DRILL 1-3/16" USA 1.1875" High Speed Steel
LISTING IS FOR A USED STRAIGHT SHANK COOLANT DRILL BRAND- PTD" DIAMETER- 1-3/16" FLUTE LENGTH- 7.00" OAL- 12.00" SHANK- 1.187" HSS CONDITION- GOOD USED MAY NEED RESHARPENED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE ... moreSAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IF ITEMS ARE UNPAID WITHI
|
|
|
StarCut .7187 x14 Carbide Tipped Gun Drill Bit Cutter 1.0 Shank Coolant 3146960
20 NOTE: I am a 48 state Over The Road Truck Driver. I am on the road 14 days on and 4 days off(home time) I have this item for sale but I cannot control which day my home time starts or ends and I cannot carry all the items I have listed with me in the company truck I drive. So PLEASE understand if you do a Buy-It-Now on this item. I may not be able to ship this item from 0 up to 15 days. I will take care of my sold items 1 st thing when I get home. PLEASE DO NOT do a Buy-It-Now if this will be a problem Thank You DesotoJoe StarCut.7187 x14 Carbide Tipped Gun Drill Bit Cutter 1.0 Shank Coolant 3146960 Item. Gun Drill Bit Manufacturer. STARCUT Sales MADE in the USA Diameter. 7187" which is just.0001 under 23/32" and also is 18.25498mm Shank Size. 1.00" x 2.75" in length Overall Length. 14.00" Flute Length with Cutter. ... more11 3/16" Type. Carbide tipped. Single Flute with a coolant hole through the shank to the tip. Condition. USED The pictures are of the acutual item you will recieve. Still in the original tube packaging Nice CLEAN and Factory Resharpened and Very Sharp Star Cutter Single Flute Gundrill- Used as a general-purpose tool in most drilling applications to obtain hole sizes within.001" Run-out requirements of.001" per inch, straightness of.001" per foot, and finishes of 63rms or better. This tool is a single flute 3 piece construction design and has the deepest flute channel, thus enabling maximum chip evacuation. Star Cutter Coolant Specifications- The gundrill is a self-piloting tool. Which requires high-pressure coolant flowing through the tool to keep the cutting edge lubricated. There are many manufacturers of Gundrill Coolants. Oil is the best type of coolant and yields the maximum tool life due to the Sulfur and Chlorine additives. SINGLE FLUTE GUNDRILL. The Single Flute Gundrill. With its ability to machine very straight deep holes and hold excellent finishes, was originally developed for gun barr
|
|
|
StarCut .5310 x 10" Carbide Tipped Gun Drill Bit Cutter 1. Shank Coolant 3026479
16 NOTE: I am a 48 state Over The Road Truck Driver. I am on the road 14 days on and 4 days off(home time) I have this item for sale but I cannot control which day my home time starts or ends and I cannot carry all the items I have listed with me in the company truck I drive. So PLEASE understand if you do a Buy-It-Now on this item. I may not be able to ship this item from 0 up to 15 days. I will take care of my sold items 1 st thing when I get home. PLEASE DO NOT do a Buy-It-Now if this will be a problem Thank You DesotoJoe StarCut.5310 x 10" Carbide Tipped Gun Drill Bit Cutter 1.0 Shank Coolant 3026479 Item. Gun Drill Bit Manufacturer. STARCUT Sales MADE in the USA Diameter. 5310" which is just.0003 under 17/32" and also is 13.4874mm Shank Size. 1.0" x 2.75" in length Overall Length. 10.00" Flute Length with ... moreCutter. 7.25" Type. Carbide tipped. Single Flute with a coolant hole through the shank to the tip. It has a.500" hole in the end of the shank Condition. USED The pictures are of the acutual item you will recieve. Still in the original tube and rubber cutter cap packaging Nice CLEAN and Very Sharp Star Cutter Single Flute Gundrill- Used as a general-purpose tool in most drilling applications to obtain hole sizes within.001" Run-out requirements of.001" per inch, straightness of.001" per foot, and finishes of 63rms or better. This tool is a single flute 3 piece construction design and has the deepest flute channel, thus enabling maximum chip evacuation. Star Cutter Coolant Specifications- The gundrill is a self-piloting tool. Which requires high-pressure coolant flowing through the tool to keep the cutting edge lubricated. There are many manufacturers of Gundrill Coolants. Oil is the best type of coolant and yields the maximum tool life due to the Sulfur and Chlorine additives. Will package multiple won auctions together to help you save on the by weight shipping cost All Sales are as-is and are Final
|
|
|
Mitsubishi 1.125" Coolant Fed Indexable Drill TASS1125
Mitsubishi Coolant Fed Indexable Drill(TASS1125) Drill Diameter: 1.125" Shank Diameter: 1.250" Max Drilling Depth: 3.000" Overall Length: 7.125" Direction: Right Hand Number of Inserts: 2 This item is in good condition and comes with two inserts shown. Will ship out one day after receipt of payment.
|
|
|
USED KOMET ABS-63 carbde INSERT COOLANT DRILL 51.00mm (ABS63-KSSB-1/51/65)
LISTING IS FOR A USED KOMET INSERT DRILL BRAND- KOMET ORDER NO. UV2101370 DESCRIPTION- ABS 63 KSSB 1/51/65 DIAMETER- 51.00mm FLUTE LENGTH- 2.55" COUPLER- ABS63 USES INSERTS- W29 42010.04. NOT INCLUDED) CONDITION- GOOD USED SOME NICKS AND DINGS ON REMOVABLE POCKETS Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT ... moreMUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE
|
|
|
1.600" diameter Coolant Drill with chamfer CT-51 480A CT & S CO like Komet ?
Nice Shape. There are 2 inserts in the tip and 1 insert for the chamfer- it's ready to go! Ships only to lower 48- Free! Lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13f80784aaa-0xf7-
|
|
|
Allied Machine 1" diam. thru Coolant Spande Drill #4 Morse Taper x 8" Long
Allied Machine 1" diam. thru Coolant Spande Drill#4 Morse Taper x 8" Long ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3715 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
|
|
|
U.S.A!! ACME COOLANT FED INDEXABLE SPADE DRILL W/ 1-1/4" SHANK
aims U.S.A! ACME COOLANT FED INDEXABLE SPADE DRILL W/ 1-1/4" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Acme. This is a Coolant Fed Indexable Spade Drill in good condition. Model# 22020S-125F Features: Excellent cutting performance in wide range of boring size even at vibration cutting condition. Applied for various workpiece such as steel. Stainless steel, cast iron, etc. Assures longer tool life and excellent surface finish. Specifications: Current Cutting Diameter: 1.030" Shank: 1-1/4" Clamping System: Screw On. Flute Length: 4-1/2" Overall Length: 7-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, ... moreplease check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! ACME COOLANT FED INDEXABLE SPADE DRILL W/ 1-1/4" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
LIKE Nu! 1" INDEXABLE DRILL WITH THRU THE DRILL COOLANT HOLES. INV=3773
CLICK ON THE THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a USED. LIKE NEW! 1" INDEXABLE DRILL WITH THRU THE DRILL COOLANT HOLES. No foreign bidders. No exceptions. NO CANADIANS. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Ever. This listing was posted using command line interface provided by. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I do collect sales tax on in-state purchases.
|
|