|
Used Milling Cutter Slitting Saw 4 X .093 X 7/8 HS Thurco
Used Milling Cutter Slitting Saw 4 X.093 X 7/8 HS Thurco Pay no more than $5.35 shipping on all combined items won within a two week period and paid for on one invoice. If you wish to take advantage of this offer please wait for invoice with combined items before paying. Any questions feel free to ask. Payments expected within two weeks of first action won. No hassle refunds on any unsatisfactory items. Posted with
|
|
|
Slugger 14" dia x 1" ID x 1/8" Thick Carbide Tip Saw Blade
Slugger 14" dia x 1" ID x 1/8" Thick Carbide Tip Saw Blade ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3834 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-1403e180917-0xfa-
|
|
|
X-Band Model# STX100 18-Volt Band Saw w/2 Batteries, Extra Blade
You are bidding on a pre-owned Stout STX100 18Volt X-Band Cordless Portable Band Saw Kit W/ Case in good condition. Both batteries have been charged to capacity and holds the charge. Band Saw has some normal wear to it from being used. Auction Includes: Stout Band Saw 2 Rechargeable Batteries Battery Charging Dock Extra Blade Carry Case Any questions. Please ask. Thanks for looking! 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-1403e180624-0xfc-
|
|
|
Used Milling Cutter Slitting Saw 4 X 1/32 X 1 HS National
Used Milling Cutter Slitting Saw 4 X 1/32 X 1 HS National Pay no more than $5.35 shipping on all combined items won within a two week period and paid for on one invoice. If you wish to take advantage of this offer please wait for invoice with combined items before paying. Any questions feel free to ask. Payments expected within two weeks of first action won. No hassle refunds on any unsatisfactory items. Posted with
|
|
|
DoAll C-260A AUTOMATIC CUT-OFF SAW NICE!
DOALL C-260 AUTOMATIC CUTOFF SAW. FULLY FUNCTIONAL. BEEN IN STORAGE SINCE BUSINESS SHUT DOWN. 703-898-4064 THANK YOU
|
|
|
STOW CO$T CUTTER CONCRETE SAW
STOW COST CUTTER CONCRETE SAW walk behind with HONDA Gas Engine GX 390. Diamond 13.0 HP 20"Excellent condition.
|
|
|
CAROLINA INDUSTRIES # HV12 HORIZONTAL VERTICAL METAL CUTTING BANDSAW
BIDDING ON A CAROLINA INDUSTRIES# HV12 HORIZONTAL VERTICAL METAL CUTTING BANDSAW.USED IN GOOD WORKING CONDITION.Check out my!Be sure to add me to your! FOR MORE INFORMATION CALL SHAWN AT 704 361-3581. DUE TO NON PAYING BIDDERS IF YOU HAVE A FEEDBACK SCORE OF 10 OR BELOW PLEASE CONTACT US BEFORE BIDDING.IF YOU DO NOT CONTACT US WE WILL CANCEL YOUR BID. LOCAL PICK UP WELCOMED-THERE IS NO CHARGE FOR LOCAL PICK ON ANY ITEM.ACCEPT PAYPAL OR M.O. LOCAL PICK UP ONLY. SELLING AS IS WITH NO WARRANTY.
|
|
|
Used Milling Cutter Slitting Saw 2-1/2 X 1/32 X 7/8 HS Circular Tool Co
Used Milling Cutter Slitting Saw 1-3/4 X 3/32 X 7/8 HS Circular Tool Co. Pay no more than $5.35 shipping on all combined items won within a two week period and paid for on one invoice. If you wish to take advantage of this offer please wait for invoice with combined items before paying. Any questions feel free to ask. Payments expected within two weeks of first action won. No hassle refunds on any unsatisfactory items. Posted with
|
|
|
GREENLEE 1395 BAND SAW
MAKING ROOM IN MY WAREHOUSE NEED GONE ASAP SACRAFICING A GREENLEE 1395 BANDSAW IN GREAT CONDITION ONLY $1200.00 OR MAKE ME AN OFFER. ANY QUESTIONS PLEASE EMAIL. CHECK OUT MY OTHER GREENLEE ITEMS I HAVE LISTED. BUYER IS RESPONSIBLE FOR SHIPPING OR PICK UP ARRANGEMENTS THANK YOU
|
|
|
2 X .018 X 3/8 HSS 152 TEETH SAW (F-2-1-5-82)
F-2-1-5-82) FROM PUBLIC AUCTION. USED, THIS IS A 2 X.018 X 3/8 HSS 152 TEETH SAW. MADE BY GLOBUS. TOOLS WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY. TOOLS THAT YOU HAVE USED ARE NOT RETURNABLE. BUYER PAYS RETURN FREIGHT. BEST OFFERS CONSIDERED ON MORE THAN ONE ITEM, SHIPPING WILL BE COMBINED ON ITEMS. PAYMENT MUST BE RECEIVED WITHIN 7 DAYS OF SALE OR WILL CONSIDER NON-PAYING BIDDER- UNLESS OTHERWISE ARRANGED. INDIANA RESIDENTS ADD 7% FOR SALES TAX OR PROVIDE T.I.D. WE GENERALLY SHIP WITHIN 24 HOURS OF PAYMENT. WEEKENDS EXCLUDED. NOT RESPONSIBLE FOR CUSTOMS DELAYS ON INTERNATIONAL SHIPMENTS. CONTACT US WITH ANY QUESTIONS VIA EMAIL OR OUR TOLL FREE NUMBER(SEE STORE HEADING) 10AM TO 5 PM EST PLEASE. PAYMENT BY PAYPAL ONLY UNLESS WE HAVE AGREED TO ANOTHER METHOD. WE ARE NOW OFFERING FREE DOMESTIC SHIPPING FOR ... moreFIRST CLASS PARCELS. IF YOU WANT PRIORITY. PARCEL POST OR COMBINED WEIGHTS ARE OVER 13 OUNCES THOSE COSTS WILL VARY BY LOCATION AND MUST BE ADVISED. PLEASE CHECK OUR STORE FOR OTHER INDUSTRIAL ITEMS. IF YOU CAN'T FIND WHAT YOU'RE LOOKING FOR. LET US KNOW.
|
|
|
1-1/2 X .012 X 1/2 HSS 110 TEETH SAW (F-2-1-5-81)
F-2-1-5-81) FROM PUBLIC AUCTION. USED, THIS IS A 1-1/2 X.012 X 1/2 HSS 110 TEETH SAW. MADE BY GLOBUS. TOOLS WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY. TOOLS THAT YOU HAVE USED ARE NOT RETURNABLE. BUYER PAYS RETURN FREIGHT. BEST OFFERS CONSIDERED ON MORE THAN ONE ITEM, SHIPPING WILL BE COMBINED ON ITEMS. PAYMENT MUST BE RECEIVED WITHIN 7 DAYS OF SALE OR WILL CONSIDER NON-PAYING BIDDER- UNLESS OTHERWISE ARRANGED. INDIANA RESIDENTS ADD 7% FOR SALES TAX OR PROVIDE T.I.D. WE GENERALLY SHIP WITHIN 24 HOURS OF PAYMENT. WEEKENDS EXCLUDED. NOT RESPONSIBLE FOR CUSTOMS DELAYS ON INTERNATIONAL SHIPMENTS. CONTACT US WITH ANY QUESTIONS VIA EMAIL OR OUR TOLL FREE NUMBER(SEE STORE HEADING) 10AM TO 5 PM EST PLEASE. PAYMENT BY PAYPAL ONLY UNLESS WE HAVE AGREED TO ANOTHER METHOD. WE ARE NOW OFFERING FREE DOMESTIC SHIPPING ... moreFOR FIRST CLASS PARCELS. IF YOU WANT PRIORITY. PARCEL POST OR COMBINED WEIGHTS ARE OVER 13 OUNCES THOSE COSTS WILL VARY BY LOCATION AND MUST BE ADVISED. PLEASE CHECK OUR STORE FOR OTHER INDUSTRIAL ITEMS. IF YOU CAN'T FIND WHAT YOU'RE LOOKING FOR. LET US KNOW.
|
|
|
2-3/4 X .032 X 1 HSS 72 TEETH SLOTTING SAW (F-2-1-5-79)
F-2-1-5-79) FROM PUBLIC AUCTION. USED, THIS IS A 2-3/4 X.032 X 1 HSS 72 TEETH SLOTTING SAW. MADE BY THURSTON. TOOLS WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY. TOOLS THAT YOU HAVE USED ARE NOT RETURNABLE. BUYER PAYS RETURN FREIGHT. BEST OFFERS CONSIDERED ON MORE THAN ONE ITEM, SHIPPING WILL BE COMBINED ON ITEMS. PAYMENT MUST BE RECEIVED WITHIN 7 DAYS OF SALE OR WILL CONSIDER NON-PAYING BIDDER- UNLESS OTHERWISE ARRANGED. INDIANA RESIDENTS ADD 7% FOR SALES TAX OR PROVIDE T.I.D. WE GENERALLY SHIP WITHIN 24 HOURS OF PAYMENT. WEEKENDS EXCLUDED. NOT RESPONSIBLE FOR CUSTOMS DELAYS ON INTERNATIONAL SHIPMENTS. CONTACT US WITH ANY QUESTIONS VIA EMAIL OR OUR TOLL FREE NUMBER(SEE STORE HEADING) 10AM TO 5 PM EST PLEASE. PAYMENT BY PAYPAL ONLY UNLESS WE HAVE AGREED TO ANOTHER METHOD. WE ARE NOW OFFERING FREE DOMESTIC ... moreSHIPPING FOR FIRST CLASS PARCELS. IF YOU WANT PRIORITY. PARCEL POST OR COMBINED WEIGHTS ARE OVER 13 OUNCES THOSE COSTS WILL VARY BY LOCATION AND MUST BE ADVISED. PLEASE CHECK OUR STORE FOR OTHER INDUSTRIAL ITEMS. IF YOU CAN'T FIND WHAT YOU'RE LOOKING FOR. LET US KNOW.
|
|
|
Used Milling Cutter Slitting Saw 4 X 1/16 X 1 HS Circular Tool Co.
Used Milling Cutter Slitting Saw 4 X 1/16 X 1 HS Circular Tool Co. Pay no more than $5.35 shipping on all combined items won within a two week period and paid for on one invoice. If you wish to take advantage of this offer please wait for invoice with combined items before paying. Any questions feel free to ask. Payments expected within two weeks of first action won. No hassle refunds on any unsatisfactory items. Posted with
|
|
|
PAIR OF T-DRILL PIPE CUTTING SYSTEM CERMET BLADES
aims PAIR OF T-DRILL PIPE CUTTING SYSTEM CERMET BLADES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by T-Drill These are 2 Saw Blades in GREAT condition. Specifications: Ceramic Alloy Tip Blade- For stainless. Acid proof and other special steels. Also for steel, copper, aluminum and plastics. Dimensions: 5.51" x 2.44" 140 x 62mm) Thickness: 060. Max RPM: 4200. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PAIR OF T-DRILL PIPE CUTTING SYSTEM CERMET BLADES Reliable Tool Inc. c 2011 | Powered by
|
|
|
metal cutting vertical band saw 35"
Normal 0 MicrosoftInternetExplorer4 For sale. Metal cutting band saw. Built by Northern Industrial Machine in Bemidji MN ¾ HP 1725RPM 120V single phase motor. Blade size. ¾”x approximatly14’ spare blades included) Useable. Exposed blade, 6” Throat size 40” Distance from cutting edge to back brace 35” Dimensions of saw 50” x 50” x 5’tall. Currently rolls on a track using v-groove wheels. Track size 4’x7’ with 49” of travel. This industrial duty saw has been used intermittently for about 10 years to cut garage door sections. We have upgraded to a different type of saw. It is in good working condition. Saw will be banded to a pallet for shipping.
|
|
|
Used Milling Cutter Slitting Saw 3 X 1/32 X 7/8 HS National
Used Milling Cutter Slitting Saw 3 X 1/32 X 7/8 HS National Pay no more than $5.35 shipping on all combined items won within a two week period and paid for on one invoice. If you wish to take advantage of this offer please wait for invoice with combined items before paying. Any questions feel free to ask. Payments expected within two weeks of first action won. No hassle refunds on any unsatisfactory items. Posted with
|
|
|
50s HAND-I-HACK POWER HACK SAW BLACKSMITH ANVIL MACHINIST MECHANICS FRIEND
Matchlessantiques is offering collectors and smiths this VINTAGE HAND-I-HACK Portable Power Hack Saw. I found this info about this power hack saw online. This is a NO RESERVE auction. The author writes; I lament on the need to hacksaw stock by hand. It is a tedious and labor intensive process that results in uneven cuts and a very coarse finish. This causes significant wastes of time. Both the time to saw the material and then to file or machine the stock even. There are various machines available to help preform this task. But a rather clever one is simply a mechanized form of hacksaw. On t his page I will describe the Hand-I-Hack power hacksaw that was made by the. I was not able to find much information on this machine. The patent number is listed on the nameplate. And a copy of the patent is below(dated 1939) I also found a copy of a ... morebrochure from 1950 on a Yahoo group dedi cated to. The machine in the brochure closely resembles the machine described below. The machine uses standard 10 inch hand hacksaw blades. And overall is constructed very simply. The body is an aluminum casting with machined mountings for all the other components. The casting even includes a built in handle. It weighs about 50 pounds and runs on a 1/4 HP AC motor(1725 RPM) The"semi-steel" vise for holding stock is mounted directly in the main casting and pivots for cutting angles or miters. NOTE: This auction is for the HAND I HACK POWER HACK SAW ONLY. The Stand and other tools ARE NOT INCLUDED in this auction. This power hack saw works as it should. As far as I can tell there's only two parts that aren't original. The blade locking and guide bar and the return height adjustment tensioner spring and steel pin that engages the steel plate. Both of the replacement parts are working as the originals would have. If you have the need for an easy way to cut metal, here's your answer. Watch the videos of how easy and fast it cuts. In both videos. You will notice that the height of the return stroke changes at times. That
|
|
|
Used Stagger Tooth Side Milling Cutter 2-1/2 X .256 X 7/8 U.T.D.Co.
Used Stagger Tooth Side Milling Cutter 2-1/2 X.256 X 7/8 U.T.D.Co. Pay no more than $5.35 shipping on all combined items won within a two week period and paid for on one invoice. If you wish to take advantage of this offer please wait for invoice with combined items before paying. Any questions feel free to ask. Payments expected within two weeks of first action won. No hassle refunds on any unsatisfactory items. Posted with
|
|
|
DOALL band saw Instruction manual 1964 models 1612-1 3613-1 2612-1 original
A 51 page instruction manual for 3 DoAll band saws. In almost perfect condition. Measures 8 1/2" x 5 1/2" with all data needed for these saws. A 1964 original. Not a copy or CD. Payment by PAYPAL only and shipping within the USA only. Thanks e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-14053e77b14-0xf4-
|
|
|
vintage 24" twisted iron hack saw-
selling is a 24" hack saw with a twisted iron handle. i will have over 100 additional tool auctions over the next 2 weeks-some automotive. these were all bought at a police recovery auction. if you want more than 1 item you can wait till all are over for a shipping discount. i can mail up to 20 pounds of tools for $13.00 as long as they fit in a flat rate priority box.
|
|
|
350mm / 14" Kalamazoo FS350S Semi-Auto Cold Saw / Dual Speed w/ Conveyor
KALAMAZOO FS350S 350MM SEMI AUTOMATIC COLD SAW W/ CONVEYOR Description: Up for sale is a Kalamazoo FS350S Cold Saw. This cold saw is in good running and operating condition. It features a 350mm blade. Dual speed control, and a 3HP motor. It can cut 4-1/2” round tubing, 3” solid bar, 3-1/4” x 5-1/2” rectangular tubing at 90°, and 2” x 2-1/2” rectangular tubing at 90°. SPECIFICATIONS MANUFACTURER KALAMAZOO MODEL FS350S SERIAL 0833 BLADE SIZE 350MM DIMENSION 32” X 42” X 73”H WEIGHT 1300LBS(APPROX) FOR MORE INFORMATION PLEASE CALL GARY AT(510) 453-0513 FOR MORE INFORMATION PLEASE CALL GARY ARAGON AT 510 453-0513 LOCATED AT 601 ALADDIN AVENUE. SAN LEANDRO. CALIFORNIA 94577* TERMS AND CONDITIONS* SALES Your bid is a contract. Place a bid only if you are serious about buying the item. If you are the winning bidder. You will enter into ... morea legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may be offered to the next highest bidder or re-listed at the sellers’ discretion. Please do NOT pay until you are invoiced! PAYMENT TERMS Gary S. Aragon. LLC accepts ATM and these major credit cards: Visa, MasterCard, Discover. Buyers may call us at 510 453-0513 with credit card information. You can also use PayPal. PayPal payments should be sent to garysaragon(at) comcast.net. CALIFORNIA STATE SALES TAX APPLIES TO ALL STATE RESIDENTS… unless we receive a valid resale card. EBAY TERMS eBay charges Gary S. Aragon. LLC a service charge for each item we list. If a customer cannot or does not pay for an eBay purchase in the specified amount of time, Gary S. Aragon, LLC will file a non-paying bidder alert with eBay. Gary S. Aragon LLC will hold the non-paying bidder responsible for the eBay fees and commissions occurred by us. SHIPPING Buyer is responsible for all shipping costs and arranging shipping for bigger/heavier items. Most o
|
|
|
Steelmax Model 2802 7 1/4" Portable Metal Cutter Saw
STEELMAX PORTABLE METAL CUTTER. Model 2802. 7 1/4" with steel cutting blade, guide and other accessories that came with it. This saw has not been used much or abused any. Includes case and manual. We are having an overstock and doubles equipment sale. We have 50+ pieces we will be selling. Most of the items are in good to like new condition. PLEASE SEE ALL PHOTOS. ALL ITEMS ARE SOLD AS IS. NO WARRANTIES OF ANY KIND ON ANYTHING. If you have a Zero(0) feedback. Call before bidding or bid will be canceled. Pickup only items: Pickup location is: BEVERLY RENTAL DEPOT 131 5 TH ST, BEVERLY. OH 45715 M-F 7am– 4pm. Sat. 8am- noon If buyer wants item shipped. Buyer will send us bill of lading at FAX 740-984-2607. We have loading facilities. And will assist with palletizing, and loading free of charge. We will NOT quote shipping. Arrange shipping, ... moreor pay for shipping. period) Shipping: Items with shipping charges will be shipped 1-3 days after payment has been received via UPS or USPS. UPS will not ship to PO Boxes. We do not ship out of the USA. Payment: We accept Paypal. We will accept green money if picking item up. Other forms of payment may or may not be acceptable. Please check before bidding. Starting Price is the RESERVE. Some items are for sale locally also. We will not cancel an EBay auction if there is a bid. If an item has no bid. We reserve right to sell locally and end auction. So bid fast to prevent local sale. All items to be paid within 10 days of auction end. If not paid. Item will be relisted. Return Policy: If you have an issue with our items. Contact us immediately by PHONE at 740-984-2517. We will work with you to resolve any issues in a manner that is professional and in accordance with all provisions herein. Any other questions please contact us at 740-984-2517. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14055ccc4e5-0x105-
|
|
|
2001 Amada Bandaw HA-250W 7"x12" 10"x11"
Template 2001 Amada Bandaw HA-250W 7"x12" 10"x11" This saw was pictured right off the truck when we received it at out warehouse. Saw comes with STOCK STAND! Crinkle on control is the original plastic that came from the factory. It's has aged with time as all things do. Machinery Exchange is a proud member of the Machinery Dealers National Association. We inspect each piece of equipment thoroughly. Representing its condition with confidence. Your satisfaction is assured with an exclusive MDNA 30-day return privilege. This privilege does not apply to items on consignment or items discounted below the original asking price. Feel free to call us with your questions. We can be reached Monday through Friday 9am to 5pm. 818) 718-6734 List Price: 14.900.00 CONDITION Cosmetically Speaking This item is in used running condition ... moreplease see pictures above for cosmetic condition. Machine is located in Chatsworth. Ca. Shipping Freight Not what you were looking for? Contact us direct with your Haas needs INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. This item is sold as pictured. I TEM S OLD A S P ICTURED Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached to a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Tooling: Below are directions on how you can calculate shipping for items under 150lbs. That does not qualify for USPS Flat Rate. Pick up/Will Call: All our items are available for pick up M
|
|
|
FEIN ELEKTROWERKZEUGE metal cutting ,USED 2 TIMES , NO RESERVE
YOU ARE BIDDING ON A EXCELLENT CONDITION. USED TWICE, A METAL CUTTING OR METAL SHEARING TOOL THIS IS A CADDILAC OF ALL SHEARING TOOL OUT IN THE MARKET. IT'S CUT LIKE SLICING THRO BUTTER NEW IS $ 500.00 AUCTION START AT $ 100.00. NO RESERVE! LUCKY WINNER GET IT SHIPPING FOR THIS ITEM IS $ 23.00 EXCEPT ALASKA& PUERTO RICO& INTRNATIONAL TO ALL BIDDERS. PLS ASK OR CALL ME IF YOU HAVE QUESTION AARON 706 979 6033
|
|
|
2-1/4 X .064 X 5/8 HSS 60 TEETH SAW (F-2-1-5-84)
F-2-1-5-84) FROM PUBLIC AUCTION. USED, THIS IS A 2-1/4 X.064 X 5/8 HSS 60 TEETH SAW. MADE IN CHINA. TOOLS WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY. TOOLS THAT YOU HAVE USED ARE NOT RETURNABLE. BUYER PAYS RETURN FREIGHT. BEST OFFERS CONSIDERED ON MORE THAN ONE ITEM, SHIPPING WILL BE COMBINED ON ITEMS. PAYMENT MUST BE RECEIVED WITHIN 7 DAYS OF SALE OR WILL CONSIDER NON-PAYING BIDDER- UNLESS OTHERWISE ARRANGED. INDIANA RESIDENTS ADD 7% FOR SALES TAX OR PROVIDE T.I.D. WE GENERALLY SHIP WITHIN 24 HOURS OF PAYMENT. WEEKENDS EXCLUDED. NOT RESPONSIBLE FOR CUSTOMS DELAYS ON INTERNATIONAL SHIPMENTS. CONTACT US WITH ANY QUESTIONS VIA EMAIL OR OUR TOLL FREE NUMBER(SEE STORE HEADING) 10AM TO 5 PM EST PLEASE. PAYMENT BY PAYPAL ONLY UNLESS WE HAVE AGREED TO ANOTHER METHOD. WE ARE NOW OFFERING FREE DOMESTIC SHIPPING ... moreFOR FIRST CLASS PARCELS. IF YOU WANT PRIORITY. PARCEL POST OR COMBINED WEIGHTS ARE OVER 13 OUNCES THOSE COSTS WILL VARY BY LOCATION AND MUST BE ADVISED. PLEASE CHECK OUR STORE FOR OTHER INDUSTRIAL ITEMS. IF YOU CAN'T FIND WHAT YOU'RE LOOKING FOR. LET US KNOW.
|
|
|
1-3/4 X .051 X 5/8 HSS 90 TEETH SAW (F-2-1-5-83)
F-2-1-5-83) FROM PUBLIC AUCTION. USED, THIS IS A 1-3/4 X.051 X 5/8 HSS 90 TEETH SAW. MADE IN POLAND. TOOLS WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY. TOOLS THAT YOU HAVE USED ARE NOT RETURNABLE. BUYER PAYS RETURN FREIGHT. BEST OFFERS CONSIDERED ON MORE THAN ONE ITEM, SHIPPING WILL BE COMBINED ON ITEMS. PAYMENT MUST BE RECEIVED WITHIN 7 DAYS OF SALE OR WILL CONSIDER NON-PAYING BIDDER- UNLESS OTHERWISE ARRANGED. INDIANA RESIDENTS ADD 7% FOR SALES TAX OR PROVIDE T.I.D. WE GENERALLY SHIP WITHIN 24 HOURS OF PAYMENT. WEEKENDS EXCLUDED. NOT RESPONSIBLE FOR CUSTOMS DELAYS ON INTERNATIONAL SHIPMENTS. CONTACT US WITH ANY QUESTIONS VIA EMAIL OR OUR TOLL FREE NUMBER(SEE STORE HEADING) 10AM TO 5 PM EST PLEASE. PAYMENT BY PAYPAL ONLY UNLESS WE HAVE AGREED TO ANOTHER METHOD. WE ARE NOW OFFERING FREE DOMESTIC SHIPPING ... moreFOR FIRST CLASS PARCELS. IF YOU WANT PRIORITY. PARCEL POST OR COMBINED WEIGHTS ARE OVER 13 OUNCES THOSE COSTS WILL VARY BY LOCATION AND MUST BE ADVISED. PLEASE CHECK OUR STORE FOR OTHER INDUSTRIAL ITEMS. IF YOU CAN'T FIND WHAT YOU'RE LOOKING FOR. LET US KNOW.
|
|
|
PROFIT POWER MILLING from VALENTINE GEAR CUTTERS LOT OF 4
YOU ARE BUYING A LOT OF 4 GEAR CUTTERS CUTTER#1-143 CUTTER#2 CUTTER#4-165 CUTTER#6 1C7-DC-31536 VERY GOOD CONDITION THIS ITEM COMES WITH A 14 DAY MONEY BACK GUARANTEE LIKE ALL OUR ITEMS MANDY 801
|
|
|
The Blade MFG MOL-GFA & COMB 10" 5/8" ARBOR
The Blade MFG MOL-GFA& COMB 10" 5/8" ARBOR YOU ARE BIDDING ON: 1- The Blade MFG MOL-GFA& COMB 10" 5/8" ARBOR DON'T MISS YOUR OPPORTUNITY TO SAVE BIG! PLEASE FEEL FREE TO ASK QUES TIONS! International buyers. We will ship worldwide, contact us before you make your purchase for an international shipping quote. If not listed as new PLEASE make sure you understand the following: They are from a working environment. They are untested and sold as-is. If Warrenty is needed do not buy this item. ALL ITEMS MAY HAVE LIGHT SCRATCHES. MAY HAVE SOME SMALL DENTS OR WARE. WE TRY TO PICTURE THEM TO REPRESENT THE CONDITION THE BEST WE CAN. IF YOU NEED MORE DETAILED PICS DO NOT HESITATE TO CALL OR CONTACT US. Monday-Friday 8a.m-5p.m Eastern 1-855-869-6191* WE WILL ENTERTAIN ANY OFFERS* PLEASE CONSIDER THE FOLLOWING WHEN BUYING ... moreITEMS. WE ARE A RESALE WAREHOUSE. WE DO OUR BEST TO DESCRIBE EACH ITEM IN ITS TRUE CONDITION! Freight: Freight prices listed apply only when being shipped to a commercial address that has a loading dock and a receiving forklift. Shipping anywhere that doesn’t have these. Please contact us so we can requote the shipping costs. If you have any question please call JAY Cell 1-574-312-4837 Office 1-855-869-6191 Thanks Again RC Recycling Warehouse Location:E-1 Sku:2262 Listed By: Abysntkrysis We gladly accept PayPal. Certified Funds, Credit Cards or Cash for local pickups. Payments must be received within 4 days, of RC RECYCLING providing shipping details. Shipping price shown is for shipping in the US to lower 48 states only. International buyers. We will ship worldwide, contact us before you make your purchase for an international shipping quote. WE DO NOT USE OTHER CUSTOMER'S SHIPPING ACCOUNTS! Please ask us for shipping quotes on any item you want shipped anywhere else. We usually ship items on the day payment is received. Our shipping hours hours are from 8am-4pm Eastern time. FREIGHT SHIPMENTS: Large items that require an LTL shipment generally go out the next business da
|
|
|
10" USED SAW BLADE *GOOD TIPS* 5/8" ID
10" USED SAW BLADE*GOOD TIPS* 5/8" ID YOU ARE BIDDING ON: 1- 10" USED SAW BLADE*GOOD TIPS* 5/8" ID DON'T MISS YOUR OPPORTUNITY TO SAVE BIG! PLEASE FEEL FREE TO ASK QUES TIONS! International buyers. We will ship worldwide, contact us before you make your purchase for an international shipping quote. If not listed as new PLEASE make sure you understand the following: They are from a working environment. They are untested and sold as-is. If Warrenty is needed do not buy this item. ALL ITEMS MAY HAVE LIGHT SCRATCHES. MAY HAVE SOME SMALL DENTS OR WARE. WE TRY TO PICTURE THEM TO REPRESENT THE CONDITION THE BEST WE CAN. IF YOU NEED MORE DETAILED PICS DO NOT HESITATE TO CALL OR CONTACT US. Monday-Friday 8a.m-5p.m Eastern 1-855-869-6191* WE WILL ENTERTAIN ANY OFFERS* PLEASE CONSIDER THE FOLLOWING WHEN BUYING ITEMS. WE ARE A ... moreRESALE WAREHOUSE. WE DO OUR BEST TO DESCRIBE EACH ITEM IN ITS TRUE CONDITION! Freight: Freight prices listed apply only when being shipped to a commercial address that has a loading dock and a receiving forklift. Shipping anywhere that doesn’t have these. Please contact us so we can requote the shipping costs. If you have any question please call JAY Cell 1-574-312-4837 Office 1-855-869-6191 Thanks Again RC Recycling Warehouse Location:E-1 Sku:2263 Listed By: Abysntkrysis We gladly accept PayPal. Certified Funds, Credit Cards or Cash for local pickups. Payments must be received within 4 days, of RC RECYCLING providing shipping details. Shipping price shown is for shipping in the US to lower 48 states only. International buyers. We will ship worldwide, contact us before you make your purchase for an international shipping quote. WE DO NOT USE OTHER CUSTOMER'S SHIPPING ACCOUNTS! Please ask us for shipping quotes on any item you want shipped anywhere else. We usually ship items on the day payment is received. Our shipping hours hours are from 8am-4pm Eastern time. FREIGHT SHIPMENTS: Large items that require an LTL shipment generally go out the next business day after payment is
|
|
|
Marvel 15 Series 15A Horizontal Bandsaw Band Saw, Auto Feed Table Metal Cuttting
Marvel 15 A Horizontal Bandsaw Believe it is a 1967 480V 3 phase 15" x 20" cutting throat Hooked it up to power. Don't really know how to operate it, but got it to open and close, the blade to turn on, the feed table to move back and forth and the vise clamps to cycle; couldn't get the water to turn on though Weighs around 6500 lbs Feel free to call 904-466-2300 with any offers. Questions, or to come take a look. Payment: Payment can be made by cash or cashier's check only. You must let me know within 24 hours how you will pay and it must be received within 5 days of sale. If paying with cashier's check. Such must occur during your bank's business hours so it can be verified. Shipping/Pickup: Local pickup is free. If shipping is desired you can set it up or ask me and I can get you a quote and set up shipping. ... moreSales Tax: Sales made to Florida residents or to purchasers picking the item up are subject to 6% Florida sales tax. Unless you are an exempt farmer. Out of state purchases being shipped out of state by a shipping company do not have to pay sales tax. Additional Terms: Item sells as is where is with no warranties or guarantees neither express nor implied. Description is subject to mistakes or errors and Buyer is encouraged to come inspect the item in person prior to purchase to assess its condition and the accuracy of the item's description. Limit of liability of the Seller shall be a refund of the purchase price to Buyer and return of the item to Seller; however. This shall in no way require Seller to offer a refund. If payment is not arranged and made within the timeline given here Buyer shall forfeit the item allowing Seller to relist or do otherwise with the item as Seller desires; additionally Seller shall retain all rights against Buyer for breach of the purchase agreement. Item for sale locally as well, Seller reserves the right to end early if it sells locally before end of auction; best way to make sure it is still available is to call first. Thanks for looking!
|
|
|
3 CARBORUNDUM AND OTHERS PRECISION 8" HSS COLD SAW CUT OFF BLADES
aims 3 CARBORUNDUM AND OTHERS PRECISION 8" HSS COLD SAW CUT OFF BLADES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Carborundum. These are 3 High Speed Steel Cold Saw Cut Off Blades. Specifications Diameter: 8" Arbor Hole Diameter: 1-1/4" Thickness: 035" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 3 CARBORUNDUM AND OTHERS PRECISION 8" HSS COLD SAW CUT OFF BLADES Reliable Tool Inc. c 2011 | Powered by
|
|
|
9 HEAVY DUTY HSS HOLE SAWS - 1-1/4" TO 2-1/8"
aims 9 HEAVY DUTY HSS HOLE SAWS- 1-1/4" TO 2-1/8" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 9 used HSS Hole Saws in good condition. Specifications: Cutting Diameters Range: 1-1/4" to 2-1/8" Arbors: 1/2" approx. Thicknesses Range: 1" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 9 HEAVY DUTY HSS HOLE SAWS- 1-1/4" TO 2-1/8" Reliable Tool Inc. c 2011 | Powered by
|
|
|
W.F. WELLS 9" x 18" 2 POST HORIZONTAL BANDSAW
Item Information Item Name: W.F. WELLS 9" x 18" 2 POST HORIZONTAL BANDSAW Item# 10366 Price/Each: $2.995.00 Year: Brand Name: W F WELLS Model: W-9 Serial# 803-456 Asset Tag: Item Location City: Chicago State: Illinois Zip Code: 60609 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description 9" x 18" W.F. WELLS 2-Post Horizontal Band Saw Model W-9. S/N 803456 Specifications: Cutting Capacities- Rounds: 9" Rectangles: 9" x 18" 45 Degrees: 9" x 10" Saw Blade Size: 138" x 1" x.032" Saw Blade Speeds: 60' � 300' Min. Blade Wheel Diameter: 20" Blade Cutting Force Control: ... more30- 200 PSI Maximum Work Load: 2000 Lbs. Distance Floor to Working Surface: 14-1/2" Motor- Blade Drive:0.75 HP 3/60 Dimensions(Approx. 74" x 24" x 54" H Weight(Est. 700 Lbs. Equipped With: Vise Blade Guide F.O.B. Chicago. IL PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with
|
|
|
Torrey Band Saw Meat Cutting / Meat Processing
Torrey Meat Band Saw. Meat Cutting/ Meat Processing This Band Saw is in Excellent Condition! Comes with 15 New Blades. Ready To Use! This is a Great Food Grade Band Saw! Model# St-295 PE 115 Volt 21A 60HZ N series DO5-039859 LONG LIFE WITH MINIMUM MAINTENANCE. The ST-295-PE Model guarantee years of continuous operation because it’s solid construction carbon steel covered with a lead free epoxy finish. Which is very resistant to corrosion. HYGIENIC. Food contact zones(fixed table and sliding table) are made of stainless steel and are easily removable without the need of tools for cleaning and sanitizing. EASY SLIDE“MOVING TABLE SYSTEM” The tor-rey easy slide system allows a precise moving table ride. Reducing effort and increasing productivity. THERMOMAGNETIC SWICHES. Protect the motor against overloads and are easily activated. EASILY DISASSEMBLE. ... moreMain components are easily disassembled(without tools) for cleaning and sanitizing and saw blade can be replaced without the need to disassemble any components. REMOVABLE WHEEL AND BLADE CLEANERS SYSTEM. To keep wheel and blade. Grease and waste-free. CONSISTENCY IN CUTS. Scaled thickness gauge that slides easily to adjust for thick or thin cuts. Helping to get more consistency in cuts TENSIONING SYSTEM EASILY ADJUSTABLE Assures a proper blade tension for a clean cut and a long lasting blade life. It has a red mark in the upper wheel to indicate right blade tension. SPECIFICATIONS(ST-295-PE) Saw Blade 295 cm/ 116”IN Throat height 42cm/16.5”IN Throat width 34cm/13.25”IN Blade speed 16m/sec/53ft/sec Thermomagnetic switches YES Waste tray YES Movable blade guard YES Sealed off bearings YES Motor 1.5HP(1.119KW) single phase Volts 115/220 Hz 50/60 Net weight 160kg/ 352lb Shipping weight 196kg/ 436lb Any other Questions Please Call 715-651-3102 or Email at Located in Cameron WI
|
|
|
1998 Amada Bandsaw HA-250 11"x 9"
Template 1998 Amada Bandsaw HA-250 11"x 9" This saw was pictured right off the truck when we recieved it at out warehouse. Machinery Exchange is a proud member of the Machinery Dealers National Association. We inspect each piece of equipment thoroughly. Representing its condition with confidence. Your satisfaction is assured with an exclusive MDNA 30-day return privilege. This privilege does not apply to items on consignment or items discounted below the original asking price. Feel free to call us with your questions. We can be reached Monday through Friday 9am to 5pm. 818) 718-6734 List Price: 9.500.00 CONDITION Cosmetically Speaking This item is in used running condition please see pictures above for cosmetic condition. Machine is located in Chatsworth. Ca. Shipping Freight INSPECTION NOTES: As with any piece of equipment. New ... moreor used, this item will require additional inspection after it arrives due to the vibration during transit. This item is sold as pictured. This saw is nice and priced to sell! Saw comes with one STOCK STAND! I TEM S OLD A S P ICTURED*Specifications subject to verification Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached to a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Tooling: Below are directions on how you can calculate shipping for items under 150lbs. That does not qualify for USPS Flat Rate. Pick up/Will Call: All our items are available for pick up Monday thru Friday from 9am to 4:30. Arrangements can be made for Saturday pick up. We do not charge loading fees for loading
|
|
|
MACHINIST MACHINE SHOP 8" DIA X 1/4" WIDE X 1 1/4" ID SLITTING SLOTTING SAW
PART OF SHELF INVENTORY OF SAW SHARPENING SHOP NOW BEING LIQUIDATED. I DON'T KNOW IF THIS SAW HAS BEEN USED OR RESHARPENED SO I HAVE LISTED IT AS USED. I PEELED BACK THE COATING TO SHOW TEETH. 8" DIAMETER X 1/4" WIDE CUT X 1 1/4" ID MOUNTING HOLE. 48 STAGGERED TOOTH DESIGN. Please ask any questions before bidding. ALASKA. HAWAII, AND PUERTO RICO PLEASE EMAIL FOR A SHIPPING QUOTE BEFORE BIDDING! FEEDBACK: We leave feedback on all of our transactions once the transaction is complete. We do not leave feedback when payment arrives. As that is only half of the transaction. Your feedback is our indication that your package arrived and all went well. We will then leave appropriate feedback finalizing the transaction. We stand behind what we sell…just contact us if there’s any problem. Payment: PayPal. Low opening bid and no reserve. ... moreShipping will be a flat fee of $12.00 to any of the lower 48 states. We ship every item the very next day after payment is received. Thanks for viewing and Good Luck bidding! ONLY PAYPAL IS ACCEPTED AS PAYMENT. IF A CALIFORNIA RESIDENT. YOU MUST ADD 8.25% FOR SALES TAX. U.S. SHIPPING ONLY! Careful packaging promised. Please read description and examine photos carefully. Email us if you have any questions before bidding. Thanks. All payments must be received within 5 days from close of auction. Pay me securely with any major credit card through PayPal!
|
|
|
Starrett Saw Tension Gage, model # 682EM, used but is great shape
Starrett saw tension gage. Used but in great shape. Come with storage case(this shows more wear than the tool) and with cardboard container. Appears scale is up to 60000 psi or 4000 kg/cm2
|
|
|
Milwaukee Model 6230 Portable Band Saw, runs but for parts only.
This is a Milwaukee model 6230 portable electric band saw. It has been used in industry and has many scratches. Is well worn and even has a chipped out section of the front case. You can see all this in the photos. It does run however. I'm selling this unit for parts only because of its heavy use history. It is 110 AC plug in type. The manual is available online as well as new parts suppliers should you decide to replace instead of repair parts. This would be a great bargain for the home hobby user. Shipping is your choice of USPS Parcel post or UPS ground, calculated to your door. Have Fun! 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14073ca242e-0xfe-
|
|
|
Montgomery Wards Powrcraft Electric Power Hack Saw with Stand in Good Condition
Montgomery Wards Powrcraft Electric Power Hack Saw Includes Stand and is in Good Condition. Will ship in Continental USA. Any questions or need more info feel free to email or call Rob@ 720-620-1084. 98.00 for Shipping and that includes Insurance. Will be packaged securely. Thank You Shipping includes Insurance and is for lower 48 states only. We do reserve the right to end this auction early as this item is also for sale locally. Thank You
|
|
|
H9AW KALAMAZOO METAL CUTTING HORIZONTAL BAND SAW MACHINE
H9AW KALAMAZOO METAL CUTTING HORIZONTAL BAND SAW MACHINE Description: This is a used and in good working condition Kalamazoo Metal Cutting Band Saw#H9AW 9 x 16 Horizontal Band Saw We are selling this"as is" but you are welcome to email any questions that you have. We will do our best to answer them. You can see from the pictures there is cosmetic wear but it works fine. Due to the weight we can have this as pick up from our local warehouse or it can be sent freight. Please email to ask the freighting costs before bidding) We can assist with freighting information and crating. If you are coming for local pick-up we are located in Wallkill. New York(near Pine Bush, NY) Our warehouse hours are firm and they are from: Monday- Friday 8:30 am- 11:00 am or 1:30 pm to 4:30 pm only. We can assist with loading the item. Please email me with ... moreany questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14073ca2568-0xfa-
|
|
|
slitting slotting saw saws milling machine bridgeport machinist tools taig
For slitting/slotting saw blades. These have been re sharpened by the shop I got them from and to my knowledge not used after being sharpened.here are diameters and thicknesses as written on each by'them: 2.760. 2.743, 2.769, 2.742. They seem about 2 mm thick Saws like this sell for $30 and up each. I believe they are High speed steel because the markings are ground off and they don't feel heavy enough for solid carbide. I am moving on the 18th. If you want me to ship before I move you must pay for these right away after auction close. If not you will have to wait until we arrive. As long as I am paid onetime I guarantee I'll ship on time Posted with
|
|
|
NEW!!! NIAGARA - 4 METAL SLITTING SAWS - STAGGERED TOOTH - 3" X 3/32" X 1"
aims NEW! NIAGARA- 4 METAL SLITTING SAWS- STAGGERED TOOTH- 3" X 3/32" X 1" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Niagara Cutter. These are 4 Metal Slitting Saws in Great Condition. Cutter Sizes: 3" x 3/32" x 1" arbor. 28 Teeth. Staggered Tooth. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NEW! NIAGARA- 4 METAL SLITTING SAWS- STAGGERED TOOTH- 3" X 3/32" X 1" Reliable Tool Inc. c 2011 | Powered by
|
|
|
wellsaw, model 1000, bandsaw
saw was working fine. Drive system was hit and detached. all parts are with saw. minimal repair required
|
|
|
Matco HS 380 Hacksaw
Up for sale today we have a used Matco HS 380 Hacksaw This saw is in excellent working condition- rough cosmetically but works like a champ! You are bidding on the saw you see pictured
|
|
|
MALCO USA 12 TIN SNIPS SCISSORS
Used model 12 Malco metal tin snips. In clean and excellent condition. Made in USA.
|
|
|
Powermatic Houdaille 87 Vertical Bandsaw Metal Cutting Saw Equiptment 3 Phase
Your bid is for A Powermatic 87 Band Saw. Government says working when last used. Picture is from NASA and unit is in Hampton. Va. 23681 I have listed this before I pick up and bring, back to Ga. just in case some one in the Va. area wants to buy it. I have no other information and you are buying the same way I buy from the government"AS-IS" If it is like the other ones I have bought from NASA it will have very little use. PLEASE READ We sell surplus government equipment. In most cases the equipment is in good working condition and with low hours. You are buying the same way I buy these items"AS-IS" Any questions. Please call 423-785-7819 11AM-10PM E.S.T. 7 days a week. Emails could take up to 5 days to be answered. I am at government auctions 3 to 4 days a week. All of our items are listed locally, We reserve the right ... moreto cancel auction at any time. We have lots of other equipment listed in our other auctions. GOVERNMENT SURPLUS As you know with most government agencies. When they get a new grant, they have to justify the grant by buying new equipment, leaving good equipment for surplus. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-14079fc9108-0xfe-
|
|
|
2 Slitting Saws & Arbor Machinist Gunsmith Milling Lathe Tools Lot
2 Slitting Saws& Arbors Both have 1/2 shank arbor Malco Saw USA Saws are 2" dia and approx.040 thick
|
|
|
Milford 47961 Saw Blade 100ft. 4 Hook
Milford 47961 Saw Blade 100ft. 4 Hook USED. NORMAL WEAR AND TEAR. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 47961 OVERALL DIMENSIONS: WIDTH: 10" DEPTH: 10" HEIGHT: 1" SHIPPING WEIGHT: 8 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE ... morePLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS. COMMENTS, OR
|
|
|
KALAMAZOO USA 610 BANDSAW horizontal metal cutting saw 110V
good used horizontal bandsaw Kalamazoo USA model 610 6" x 10" capacity 110V single phase Baldor motor takes 89" x 1/2" blade runs and cuts fine except the tube is cracked where it goes into the hydraulic feed cylinder- last picture please check my other auctions and happy bidding! there will be a $50 charge to pallet. Band and shrink wrap as needed for a shipping quote call Jack Becker at 1-800-323-5441 ext 1951 or JBECKER at freightquote. com. tell him 230lbs on a pallet 48" long x 42" wide x 38" tall from MILROY MACHINE or pickup in Milroy Indiana zipcode 46156 and i will load for free Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Foley 316 Rivet Spinner
Foley model# 316 Rivot Spinner-like new condition. Free Shipping!
|
|
|
Foley model 315 chain breaker
Foley model# 315 chain breaker.like new condition Free Shipping!
|
|
|
SLITTING,SLOTTING SAWS ,HSS. P&W,BROWN & SHARPE, UNION ,OTHERS , LOT OF 7
4" AND OTHER DIAMETERS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14088679634-0x102-
|
|
|
SLITTING,SLOTTING SAWS ,CARBIDE ,FULLERTON,OTHERS, 1" - 1 1/4" DIA , LOT OF 21
MOST ARE 1" 1/4" DIA. MANY ARE.050" THICK
|
|
|
U.S.A!! LOT OF CREDO AND OTHER HSS CARBIDE TIPPED CIRCULAR / SLITTING SAWS
aims U.S.A! LOT OF CREDO AND OTHER HSS CARBIDE TIPPED CIRCULAR/ SLITTING SAWS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Credo& other manufacturers. This is a Lot of HSS Carbide Tipped Circular/ Slitting Saws in good condition. Specifications: Cutter Diameters Range: 7" to 10" Arbor Sizes: 5/8" Thicknesses Range: 100" to.130" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! LOT OF CREDO AND OTHER HSS CARBIDE TIPPED CIRCULAR/ SLITTING SAWS Reliable Tool Inc. c 2011 ... more| Powered by
|
|
|
MODEL 200 FOLEY BELSAW CUTTING MACHINE
MODEL 200 FOLEY BELSAW CUTTING MACHINE.WORKS VERY WELL.NEEDS A BELT,A ROUND VACUME CLEANER BELT WORKS GREAT.MOTOR RUNS VERY SMOOTH.SHIPS IN U.S.ONLY.THANK YOU.
|
|
|
6 Cobalt Alloy Lathe Part Cut-Off Blades Bits Machinist Gunsmith Mill Tools Lot
Ebay Base This auction is for 4 cobalt alloy lathe part cut-off blades in 11/16" shank. The thickness are 3/32" 1/8" 3/16" These high quality bits are made by Empire and Pandix. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
|
|
|
Industrial Metal Bandsaw
Carolina Tool and Equipment. 3/4HP. Dayton capacitor start motor. Runs good. Cuts good, new replacement blade. Being sold as is. Questions welcomed. Posted with
|
|
|
Vintage Foley Saw Blade Retoother Model 332 Manual Crank For Parts ONLY
Up for your Consideration: Vintage Foley Saw Retoother Model 332 The tool would appear to be in Good Vintage Working Condition- By that I mean- the Mechanism/ Ram Works Very Smoothly when the Handle is Cranked I do not see any obvious Cracks. Breaks, or Repairs The Handle is Nice& Solid No Accessories or Rails This is being sold"As-Is for Parts" simply because I have no knowledge of how this machine works See All 12 Photos for Parts and Condition Overall 55lbs Shipping Weight from ZIP 97814 Handle(Included) will be Removed for Ease of Shipping Photos are Considered Part of the Description ~~~~~ Need More Photos? Have Questions? Please Feel Free to Contact Me*NOTE: Description is Only My Opinion. Please Use the Photos to Finalize your Decision ~~~
|
|
|
JET HORIZONTAL CUT-OFF SAW BLADE 150"x1" AUTOMATIC
Been out of service for years. Selling as parts machine. Has roller type feed and micro switch length stop, as I recall it needs stop switch, minor wiring, possibly counter. I had feed motor rebuilt shortly before machine was parked. Main, feed, hydraulic, coolant motors work. Machine was stored. I believe it could be put back in service, it needs a handyman and TLC. It was a decent saw and did a lot of cutting. As any used machine I'm selling as is, where is. Illness forces me to clean out my warehouse. I will pallet and load. No books. Original owner passed away and paperwork was lost. Weighs approximately 1,500 lbs. Serial# 12241.
|
|
|
Simonds 5764 TT-44 Sabre Set 4 Tooth Band Saw Blade
Simonds 5764 TT-44 Sabre Set 4 Tooth Band Saw Blade USED. NORMAL WEAR AND TEAR. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 5764 OVERALL DIMENSIONS: WIDTH: 12" DEPTH: 12" HEIGHT: 1" SHIPPING WEIGHT: 8 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL ... moreNOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS.
|
|
|
Milford 47911 TT-44 Saw Blade 100ft. 3 Hook
Milford 47911 TT-44 Saw Blade 100ft. 3 Hook USED. NORMAL WEAR AND TEAR. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 47911 OVERALL DIMENSIONS: WIDTH: 10" DEPTH: 10" HEIGHT: 1" SHIPPING WEIGHT: 8 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT ... moreTAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS. COMMENT
|
|
|
1" x 6" DIA. NIAGARA STAGGERED TOOTH SIDE MILL HIGH SPEED CUTTER MADE USA
SquareTrade © AP6.0 This is a Niagara Staggered Tooth in very excellent condition. Still being made in the USA since 1954. Niagara Staggered Tooth Side Mill Model S6162 24 Teeth Has been professionally resharpened to approximately.950" width X 5.915" Diameter Resharpened with approximately.045" edge break on one side and.075" on the other Staggered Tooth Design allows excellent chip removal in heavier cuts 1-1/4" I.D. 5/16" Keyway Weight 8 Pounds See Photos I DO HAVE MORE AND ASSORTED SIZES. JUST ASK Compare@ $270.00. See manufacturer's information@ http:www.niagaracutter.com/millingcutters/s.pdf Buyer Pays Shipping. We combine multiple items for shipping when possible. Indicate if delivery is to a business or a residence. See other items in our e-Bay store. Be sure to add me to your favorites list! ... moreI HAVE OVER 1000 ITEMS IN MY E BAY STORE. IF YOU CAN NOT FIND WHAT YOU WANT. JUST ASK. Visit store: G and G MACHINERY If you have any questions contact Gerry at 727-547-0616. WE WELCOME INSPECTIONS AND CUSTOMER PICK UPS WE ACCEPT ALL MAJOR CREDIT CARDS! On Feb-18-09 at 02:03:03 PST. Seller added the following information: I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping, and the item is shipped, YOU, the BUYER, are now responsible, along with the shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges, such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW
|
|
|
Milwaukee Deep Cut Band Saw 6232-81 New Reconditioned by Factory SOLID !!
Almost new condition as you can see from the detailed photos! Milwaukee Factory reconditioned and QC making sure all things are right before selling! Used only in our lab for cutting one small aluminum rod. Almost brand new! These Milwaukee Deep Cut band saw really is the top top top of a solid performer! Auction is for one Band Saw. Plus. A nice Alloy Steel Saw Blade# 48-39-0260 5/32" 3/4" Thickness of material to be cut, Teeth per inch. is 14, Length is 44-7/8" NO RESERVE! Bid with confidence! I am 100% Rated with 13+ years doing 90.000+ transactions in eBay! Thanks! Terms of Sale Buyer pays $22 for shipping to all 48 States. Alaska& Hawaii buyer pays US $28 for shipping. No International Shipment. Payment must be sent out within 1 day! I want to send you this nice package as soon as possible! Much Appreciated! Thanks ... morevery much and Happy Bidding! Please click on the pictures below for better details:
|
|
|
PAIR OF HEAVY DUTY METAL BANDSAW COILS
aims PAIR OF HEAVY DUTY METAL BANDSAW COILS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Milford& Other Mfgs. This is a pair of Assorted Heavy Duty Bandsaw Coils in Good condition. Specifications: Lengths 100' Approx) Widths: 3/8" 1/2" Gauge: 025" 030" Teeth: 6& 10. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PAIR OF HEAVY DUTY METAL BANDSAW COILS Reliable Tool Inc. c 2011 | Powered by
|
|
|
ASSORTMENT OF CARDINAL AND OTHERS PRECISION HSS SLITTING SAWS
aims ASSORTMENT OF CARDINAL AND OTHERS PRECISION HSS SLITTING SAWS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Cardinal& other manufacturers. This is a Lot of HSS Slitting Saws in good condition. Specifications: Cutter Diameter Range: 1-3/4" to 3-1/2" Arbor Sizes: 1/2" to 1" Thicknesses Range: 025" to.114" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ASSORTMENT OF CARDINAL AND OTHERS PRECISION HSS SLITTING SAWS Reliable Tool Inc. c 2011 | Powered by e5b.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-140a5ea546e-0xf7-
|
|
|
Skarpaz Miter Radial Arm Saw Blade P1060A - Used Only Once
Like new- in original package- used only one time. Skarpaz Miter/ portable radial arm saw blade. Part number P1060A- 10 inch. 60 tooth, OATB. Free USPS Priority shipping in the U.S. only.
|
|
|
"Marvel Heavy Duty Horizontal Band Saw Series 15/6-8"
Production automatic band saw with a capacity of 15" x 20" Has 1 1/4" Blade. Runs on 3 phase power. Good condition.
|
|
|
Vintage Hacksaw, Allway,Ultra Mfg. Co. New York City, Nice Size For Tough Spots
Up for sale is this vintage small hacksaw. It is signed"Allway Ultra Mfg. Co. NYC"and"Pat.No. 2011895. It is in good used condition as pictured. Please view all of the pictures to determine condition for yourself. Plaese visit my ebay store for more vintage tools and estate finds. I will always combine shipping to save you money on multiple purchases.
|
|
|
Evolution Steel Circular Saw - Excellent Condition!
If you are in the market for a Circular saw made for cutting steel and aluminum this is the best there is. It is in excellent condition has less than one hours use. This was purchased for a specific project and worked impeccably but has not been used since. Will work with buyer to arrange most economical shipping method. Will not charge handling fees; buyer to pay shipping fees. Posted with
|
|
|
4 Mini Side Milling Slitting Saws 1/2" Arbor Machinist Gunsmith Lathe Tools Lot
Ebay Base This auction is for 4 HSS slitting saw blades with 1/2" through hole and widths of 1/16" 1/8" 3/16" These are made by National& Putnam. Sharp and ready to use Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
|
|
|
LOT OF LENOX & OTHERS HSS HOLE SAWS 1-1/4" TO 5-1/2"
aims LOT OF LENOX& OTHERS HSS HOLE SAWS 1-1/4" TO 5-1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Lenox& other manufacurers. This is a Lot of HSS Hole Saws in good condition. Specifications: Cutting Diameters Range: 1-1/4" to 5-1/2" Arbors: 1/2" approx. Thicknesses Range: 050" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF LENOX& OTHERS HSS HOLE SAWS 1-1/4" TO 5-1/2" Reliable Tool Inc. c 2011 | Powered by
|
|
|
Acme Jr Circular & Chain Saw Sharpner with Attachments
Hi! This saw is in excellent operating condition. If you have any questions. Would like to discuss shipping options, or want to arrange for a Southern California pick up don't hesitate to message me.
|
|
|
Festool TS 55 Plunge Cut Track Saw
Festool TS 55 Plunge Cut Track Saw Item USED in good working conditions. SOLD US PICTURED. Item SOLD“AS IS’ No returns ore exchange. Thank you.
|
|
|
12 Starrett hole saws plus couple lenox from 3 3/4-1" tools metal saw
This is a misc. lot of Starrett and Lenox hole saws. The Starett sizes are 3 3/4" great shape with arbor. 3 1/2" good shape with arbor, 3" great shape with arbor, 2" great shape with arbor, 1 1/2" good shape with arbor, 1" great shape with arbor, 1 1/2" good shape hole saw, 2 1/2" great shape hole saw, 2 7/8" great shape with box, 1" good shape hole saw, 1 1/8" good shape with arbor, 2" great shape in box hole saw. Lenox hole saw 5/8" new in box, good shape Lenox 1 1/8" hole saw, and a Lenox 2 1/2" hole saw good shape
|
|
|
LOT OF MACHINIST SLITTING SAWS & ARBORS MILL MILLING MACHINE LATHE ATLAS BURKE
LOT OF MACHINIST SLITTING SAWS& ARBORS MILL MILLING MACHINE LATHE ATLAS BURKE Brand Unknown Packaging None Condition Good Quantity Entire Lot 1/2" to 3/16" Shank. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Malco HSS Screw Slotting Slitting Saw Blade Saws Diameter 2 3/4x.102x1 X72Teeth
Malco HSS Screw Slotting Slitting Saw Blade Saws Diameter 2 3/4 x.102 x 1 X 72Teeth Malco Saw Company- Made in the USA This Slotting Saw appears to be in Like New condition- apparently the supplier's overstock. It was acquired in"as is" condition and are being sold the same"as is" see pictures for details. You are buying this item exactly as shown in the pictures. You will receive One Malco Slotting Saw for the price shown. Below are the product details as shown on the supplier's website for this particular model number. They are here for informational purposes only to show the specifications of this item in Brand New condition. Again. The item you are buying is being sold AS SHOWN IN PICTURES. Supplier's list price New $32.38 Blade Diameter(Inch) 2-3/4 Blade Thickness(Decimal Inch) 0.1020 Connection Type Arbor ... moreArbor Hole Diameter(Inch) 1 Cutting Direction Right Hand Concave Ground(Yes/No) Yes Tooth Configuration Straight Material High Speed Steel Finish/Coating Uncoated Number of Teeth 72 Keyway(Yes/No) Yes* Please ask questions prior to making a bid* Free Shipping Local Pickup is always an option- If you would like to pickup your item locally- send a request at the end of the auction and ask to be invoiced for local pickup. Seller will ship item within 1 days of Auction Close and provide Buyer with a confirmation of shipping. FEEDBACK: If you are unhappy for any reason. Please contact us prior to leaving any neutral or negative feedback. We strive for 100% customer satisfaction and hope you will give us the opportunity to correct any potential problems. We leave positive feedback for all customers who have completed a successful transaction with us. Returns are accepted for refund within 14 days. Buyer is responsible for return shipping costs and must contact seller prior to returning item. Returned items must be received by Seller in same condition as they were shipped in prior to refund being issued. NOTE: All item(s) being sold are in"as is" condition and exactly as
|
|
|
USED PRATT WHITNEY USA SLITTING SAW CUTTER 6" x 3/32" x 1-1/2"-hole HSS
LISTING IS FOR A USED SLITTING SAW CUTTER BRAND- PRATT WHITNEY MADE IN THE USA DIAMETER- 6.00" FACE WIDTH- 3/32" HOLE- 1.50" 44-TEETH HSS CONDITION- USED MAY NEED RESHARPENED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. ... moreAS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTI
|
|
|
CAROLINA INDUSTRIAL METAL 110V HORIZONTAL BAND SAW
Item Information Item Name: CAROLINA INDUSTRIAL METAL 110V HORIZONTAL BAND SAW Item# 10739 Price/Each: $1.200.00 Year: Brand Name: CAROLINA Model: Serial# Asset Tag: A4883 Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description CAROLINA INDUSTRIAL METAL 110V HORIZONTAL BAND SAW 39" TABLE 27" MAXIUM JAW OPENING CUTLER-HAMMER SAFETY STOP SWITCH LITTLE GIANT COOLANT PUMP 1.1 AMP 110V 1HP SINGLE PHASE BALDOR MOTOR 1725 RPM- Contact Us About This Machine Should you have questions. Please contact Luis Santiago at 860-484-4449 PAYMENT& SHIPPING: Payment Details: ... moreWe will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they will be responsible
|
|
|
Labor Sabre Die Saw
This auction is for a Labor Sabre Die saw. This is the E52 model. Has a 52" Throat. Cast iron table that measures 36" x 32" 1/2 HP Industrial Motor. Fully Encased Single Phase 110/220 Volt. 1725 RPM Saw tabletop and frame are Pin-fitted for Permanent and Precise Alignment 4 Working Saw Guide 1½" 2" 3/4" and 6" sizes Cuts through materials up to 1" thick. Heavy Steel Box Tube Frame Foot Pedal Operated Jig Unit. This machine comes with 2 options that would normally cost extra. First one is a 1 HP. 610 cfm Whisper Quiet High Volume Integral Vacuum System(Operates on 110/220 volt power supplied from saw) The second option is an Industrial Quality 5 speed Drill Press w/ 1/2" chuck. This unit is only missing the connecting hose thatt goes from the vacuum to the saw itself.
|
|
|
KEYWAY CUTTER #9 606 3/4 X 3/16 HS STR TOOTH
KEYWAY CUTTER#9 606 3/4 X 3/16 HS STR TOOTH I am listing this as used. But it look like it has never been on a machine or used in any way. It is in the original box with the MSC number on them. Check it out.
|
|
|
** VINTAGE 1930'S ACORN PROFESSIONAL CUTTING TOOL WITH RAZORS **
My uncle was a great collector. He traveled to many places to find his items. This cutter was part of that collection. It is a Acorn Professional razor cutter. It is from the 1930's. It has some wear but nothing really major. It comes with a box of 5 professional rust resisting blades. I was told it was used to cut glass.
|
|
|
Fein STS325R 2-3/8-in Pneumatic w/ Clamp Mounted Pipe Cutter *Used, Works Great*
UP FOR SALE! Fein STS325R 2-3/8-in Pneumatic w/ Clamp Mounted Pipe Cutter*Used. Works Great* Fein is used. Works great Comes as shown in photos Feel free to ask any questions There is no international shipping Check out our eBay store for similar tools Thanks for looking Shipping Policy: Please make sure the address you have provided on your Ebay account is the correct address to ship your item to. If you have just moved or are on going on vacation make sure you change your address before you complete check out) There is a 7% sales tax for NJ residents/accounts You can always come and pick up your item from our location. 7% sales tax will still be applied for any customers residing New Jersey The shipping charge also includes packaging materials and time to take the package to post office. All of our items are packed and shipped on the day ... morethey are purchased or the day immediately following(NO SHIPPING ON THURSDAYS) Larger packages may take some more time than usual. At most three days should be well enough to get the proper materials to get these type of products out the door and to your location. If you require to receive your item ASAP please contact us and we will try our best to accommodate your needs Once UPS/USPS have the item we are not responsible for their shipping time. Most times your item will arrive quickly but there may arise some delay, please do not hold us responsible iPods. Cameras, other small electronics or valuable items as well as items that are being sent in close proximity to NJ are sent USPS priority Large items especially those going west of the Mississippi River are sent UPS ground All items expertly packed in bubble wrap and/or tucked in peanuts. Purchasing Information: There is a 7% sales tax for NJ residents Auctions must be paid within 3 days. If this is an issue please let us know before bidding Please Ask Questions Before Bidding. Once you bid we CAN NOT cancel bids Please also take the time to check our feedback Return Policy: ITEMS CAN ONLY BE RETURNED WITHIN 3 DAYS OF REC
|
|
|
One Inch Sliting Saw Holder - With 5 Slitting Saw - Differance Sizes- Tool Maker
Your Bidding on a 1" Dia. Slitting Saw Holder with a 3/4" Shank. The slitting saw Holder was made by me. Also on 5 Slitting Saws. They are all in Cleveland Holder, They look like they haven't been used. The Sizes are: 1st size: 4" Dia. X.036 X 1" Hole 2nd size: 4" Dia. X.032 X 1" Hole 3 rd size: 2-3/4" Dia. X.036 X 1" Hole 4 th size: 2-3/4" Dia. X.016 X 1" Hole I'am retired now and selling all my tools. Thanks for looking or Bidding. Please by PayPal only. your bidding on
|
|
|
HEAVY DUTY WESPA 36" VERTICAL BAND SAW / HYDRAULIC TABLE FEEDER / BLADE WELDER
For Sale! HEAVY DUTY WESPA 36" VERTICAL BAND SAW/ HYDRAULIC TABLE FEEDER/ BLADE WELDER(OC156) General Information: You can preview this unit at our warehouse in Gardena. California-Call to schedule an appointment- Payment can be made by: Certified checks. Company Checks, Wire transfer, direct deposit, Credit Card or Paypal. Call or email for more payment details* We have freight assistance via: LTL. Full Trucks, Flat Bed and local delivery. Call or email to request a quote- All purchases less than 150 lbs will ship UPS. Fedex or USP S. FREE LOADING AND PACKAGING IN ALL PURCHASES) CALL. TEXT OR EMAIL WITH QUESTIONS. 714)658-5390* SE HABLA ESPAÑOL* Visit our eBay store A GLOBE ENTERPRISES INC. COMPANY www.orangecountymachinery.com Ph# Fax#
|
|
|
Amada Togu III 2012 Automatic Tool Sharpener
Amada Togu III 2012 Automatic tool sharpener almost new SPECIFICATIONS Control Sequencer circuit Maximum grinding amount 0.99 mm(0.099” Maximum tool diameter 160 mm(6.299” Type E(4-1/2” die) Minimum tool diameter 1.51 mm(0.059” guaranteed) Maximum tool height 150 mm(5.906” when Type E(4-1/2” shear-angled punch body jig is used) Minimum tool height Chuck jaw height Standard grinding wheel Made of CBN and 135 mm(5.315” in diameter(conductive) Spindle motor 1.5 kW. 2P Spindle rotating speed 2810/3000 min–1(rpm) at 50/60 Hz Vertical travel distance 240 mm(9.449” Vertical feed motor 40 W. DC servo motor with 1/10 gear head Jog feed speed 300 mm(11.811”min Positioning speed 30 mm(1.1811”min Grinding speed 0.06 mm(0.0023622”min Table motor 0.1 kW. 4P, 1/30 geared motor Table rotating speed 60/72 min–1(rpm) at 50/60 Hz Coolant tank capacity 34 L(8.98 ... moreUS gal) full capacity) Coolant pump motor 0.06 kW. 2P Coolant pump capacity 20/25 L(5.28/6.61 US gal)min at 50/60 Hz Air consumption 1700 L(60 ft3)min at 0.5 MPa(5 kgf/cm2 or 72 psi) Supply voltage 3-phase. 200 V at 50/60 Hz Electric power consumption 2.5 kVA Machine mass 480 kg(1059 lb) excluding transformer mass) Machine dimensions 813 × 858 × 1930 mm(32.008 × 33.780 × 75.984 Shipping Can be shipped anywhere. Please email zip code for a freight quote. Can also be picked up in Santa Ana, CA. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14189b8a79e-0x109-
|
|
|
(#3442C) Used American Made Machinist 6 x 1/16 x 1 Inch Plain Metal Slitting Saw
No 3442 Retired Machinist/Toolmaker with 40+ years in the trade. Liquidating MY VAST collection of tools. Along with some tools purchased from recently closed Tool& Die shops. 3442C) Used American Made Machinist 6 x 1/16 x 1 Inch Plain Metal Slitting Saw You are bidding on a used. American made, manufactured in by Thurston Manufacturing& Tool Co. in the USA, 6 x 1/16 x 1 inch, plain style metal slitting saw. Its features are: High Speed Steel* 1/16 inch thickness* 6 inch cutter diameter* 1 inch Arbor Hole* 1/4 inch keyway* 42 teeth I will combine shipping when winning more than 1 item please request invoice for combined shipping. This item will shipped by first class mail. I try to ship within 48 hours of payment excluding weekends. Any payments after 7:00 PM EST on Fridays will be shipped Monday morning! Buyer responsible for shipping ... moreApprox. shipping Wt 8 OZS. Good-Luck Bidding
|
|
|
Coddard & Coddard 14" X 2" Milling Cutter Horizontal Milling Machine Rh Blade
See pics as I am most likely completely wrong about this and could use some guidance. Came from contents of a building at a closed down machine shop which is how I came up with my guess. If you have the details as to what this might fit please feel free to help. Shipping is estimated. If I can get it in a flat rate large box then shipping will be less but I just am not sure it will fit. Posted with
|
|
|
PAIR OF SLITTING SAWS 1-1/4" BORE W/ HEAVY DUTY R8 SHANK ARBOR ADAPTER
Pair of Slitting Saws w/ Side Chip Clearance& R8 Shank Arbor Includes Slitting Saws: 4" x 11/64" x 1-1/4" Hole 4" x.130 x 1-1/4" Hole R8 Shank Slitting Saw Arbor Measures 7-1/2" Overall Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
*USED* Jet Horizontal/Vertical Bandsaw Model# HVBS-7MW Motor: 3/4HP 1PH $950.00
USED* Jet Horizontal/Vertical Bandsaw Model# HVBS-7MW Motor: 3/4HP 1PH 115/230V Prewired: 115V $950.00-Shipping costs will vary depending on location. If you have any questions please call 713-644-4011. Everything is sold as-is. Where-is, without warranties, unless expressed in writing. Industrial Surplus Inc. is a surplus warehouse in Houston, Texas with several lay-down yards throughout the United States. We buy and sell ALL types of surplus equipment. Machinery and material nationwide. We make every effort to provide honest and full disclosure regarding the condition of our inventory and include photos, however the following should be considered prior to purchase. All items are sold as-is. With no warranty or guaranty expressed or implied. Though some items may be in the original manufacturers packaging, ALL are sold as Used Surplus. As ... morewith all"used" items, there may be signs of use and wear, e.g. minor scratches, scuffs, or blemishes. Test results and maintenance records will also vary per item. Please feel free to contact one of our representatives at(713) 644-4011 with ANY questions regarding product condition or shipping options prior to purchasing. Bidding or submitting a best offer on eBay. We will be very happy to address any and all questions or concerns. M.R.
|
|
|
Foley Belsaw Model 200 Replacement Parts Motor w/Switch Cutter Blade
Here are some replacement or repair parts for the model 200 Key cutting machines as seen in the photos. Might fit other models also. Comes with everything shown in my photos.
|
|
|
MILL CUTTERS - 6 SLIT CUTTERS
SLIT CUTTERS. SOME RUST ON THEM- SEE PICTURES. 4X3/8X1.1/4 HSS- POLAND MADE 4X5/8X1.1/4 HSS- POLAND MADE. 4X5/32X1 HSS- POLAND MADE. 4X3/32X1 HSS- POLAND MADE. 4X3/32X1. 4X5/32X1 HSS- POLAND MADE.
|
|
|
Boss Machinery TO-12 Table Saw Auto Feed w Rollers NICE
You are viewing a Boss Machinery table saw that is model TO-12 and is equipped with an auto-feed system of rollers. This saw runs on 3 phase. 600V input power with its 7.5HP motor. Great unit that has been tested and is guaranteed to be working well. View all the pictures closely and bid with confidence. internal:MF) SEND ME FURTHER QUESTIONS AND COMMENTS! Please check your junk box regularly because many times my emails get filtered there automatically. I also enjoy receiving any extra comments and information on my listings so please feel free to email me your thoughts. We strive for“5 STAR SERVICE” Please help us with your comments to improve in any way to achieve" 5 STAR SERVICE" WHAT TO EXPECT AFTER BIDDING AND WINNING: 1. Win your item! 2. Receive a total with shipping(UPS to the US) applicable taxes(5% GST only in Canada. ... more13% GST& PST for Ontario customers) 3. complete payment(we accept paypal or credit card over the phone) 4. In just 5-7* days receive your item quickly with UPS to the US and Canada Post to Canada or a freight company*SHIPPING NOTICE: All items shipped to the USA weighing under 150lbs will be shipped with UPS and arrive to you in 5-7 BUSINESS DAYS. This is a recent and dramatic improvement over Canada Post which used to take 2-4 weeks! You get your goods 3-6 TIMES FASTER! DETAILED SHIPPING INFORMATION INFO FOR SMALL ITEM SHIPPING ITEM WEIGHING 150lbs and LESS For items under 150lbs(30kg) I use UPS.com to the US and Canada Post to Canada. There are absolutely no issues with customs to the US. Canada Post is very fast within Canada(typically within 5 days) And UPS is equally as fast to the US usually taking around 5 business days. The cost listed below is shipping for the US using UPS. Canadian customers please email me to get a shipping cost for you which should be cheaper. I use an outside packager so after your payment is received, your item is sent another local business which packages and ships your goods. It may take up to 5 business days to get your item properly
|
|
|
STARTRITE VERTICAL SAW Mod: 316H - 36" Throat Capacity - c/w BLADE WELDER
STARTRITE VERTICAL SAW Mod: 316H SERIAL NO: 85612 SPECIFICATIONS: Capacity: 16' Throat cap: 36' Variable speed. Blade: 1/8' to 1" Blade welder. 2 Tables 26' x 28' and 13' x 22' Inclinable table Feed on table Voltage: 550 volt.3 ph. Dimensions: 80" x 49" x 84"
|
|
|
Liester Groover Machine
Groove cutting of all types of floor coverings· Very high rotational cutting speed at two levels· Easy and safe handling. Adjustable guide roller for tracking accuracy. Particle and dust-free working with additional fan and dust bag. Milling close to the edge possible. Technical data Voltage, V, 120 230, Power consumption, W, 350/ 700(2 levels) Frequency, Hz, 50/60, Speed, min, Level 1: 14500(350W) Level 2: 18500(700W) Noise emission level, db, 84, Sound pressure level, db, 100, Vibration acceleration, m/s2, 1.6, Groove depth adjustment, mm, 0-4, Size LxWxH, mm, 240x205x255, Weight, lb, 14.75(with 3 m cord and ejector pipe) Marking conformity, CE, Approval mark, s, Certification scheme, CCA, Protection class II, double insulation Includes 3 different blades for grooving. This is a very gently used item in excellent condition. Please ... morefeel free to ask any questions and thank you for looking!
|
|
|
Used Millimg Cutter Slitting Saw 3 X 3/32 X 1 HS Union Twist Drill Co.
Used Millimg Cutter Slitting Saw 3 X 3/32 X 1 HS Union Twist Drill Co. Pay no more than $5.35 shipping on all combined items won within a two week period and paid for on one invoice. If you wish to take advantage of this offer please wait for invoice with combined items before paying. Any questions feel free to ask. Payments expected within two weeks of first action won. No hassle refunds on any unsatisfactory items. Posted with
|
|
|
Scotchman Industries 300mm cold saw blades
Selling 2 used but resharpened Scotchman Industries 300mm OD x 3.2mm Thickness x 40mm Arbor Cold metal saw blades Made in Holland. Recently sharpened and they have plenty of tooth left for many more resharpenings. Cosmetic flaws do not affect usage. See pics. More pics available upon request.
|
|
|
UNIVENT PRO-SAW CUT-OFF RESCUE CIRCULAR SAW HUSQVARNA K750
This NO RESERVE AUCTION is for a UNIVENT PRO-SAW CUT-OFF RESCUE CIRCULAR SAW HUSQVARNA K750. This 14" saw is previously used. It has been tested and starts easy, runs good, there are some scrapes as pictured from prior use, the connector that attaches to a water line does screw on and hook up but there is some damage above the screw on hookup, see the 2 pics I shot of that region. The Pro-Saw/Cut-Off rescue saw can cut virtually any material; brick, concrete, wood, steel, etc. The perfect fire rescue saw. Ergonomically designed to work in confined spaces. Lightweight and powerful for safe and easy operation. Built tough to meet rescue personnel's extreme demands. If you have any questions, email me. See the pictures for actual item up for auction here. Please check our feedback. Thousands of customers can't be wrong. Bid with ... moreconfidence& remember this auction comes with a 14 day money back guarantee(shipping/insurance) The shipping/handling/insurance will be $45.00 for this item. Shipping cost posted is based on the lower 48 states. I sell only quality merchandise. This NO RESERVE Auction is starting at $.99 cents. NO ZERO FEEDBACK(0) BIDS ACCEPTED. NO EXCEPTIONS, GOOD LUCK! My Policies: Shipping based on the lower 48 states. All payments must be received within 10 days. U.S. sales only. Illinois residents and all items picked up in person are subject to a local 6.85% sales tax. Powered by
|
|
|
8 pieces machinist slitting saw blades
8 pieces machinist slitting saw blades 2=1.5”dia. 030 thick.313 hole 3=1”dia. 032 thick.313 hole 3=1”dia. 040 thick.313 hole Thanks for looking at my auction. Well do combine shipping so please wait for an invoice if you by more than one item. If you have any questions please ask and I’ll do the best I can to answer. Have a great day. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Stanley 14 inch Miter Saw with Miter Box Nce - Fast Shipping
Stanley 14 inch Miter Saw with Miter Box This used saw and miter box is in excellent condition. Looks like it has only been used a few times. Material secures to the base with a twist of the cam pins Cuts miters on 45 degree and 90 degree angles. Face angle 45 degree and 22-1/2 degree angles Moldin-in storage compartments hold cam pins and pencil Molded lip on base edge for easy use without mounting Built-in saw stop prevents cutting into miter box Buy Now. I guarantee you will love this item or your money back. Simply return it no questions asked. Payment Method Shipping and Handling When the auction is over. The high bidders will receive invoice notification of all items won. I accept Paypal only. Payment must be settle via Paypal within 3 days after end of the auction. All auction items will be shipped promptly after payment is received. ... moreI will gladly ship world wide Please email me for shipping rates outside of the United States. Your items will be shipped promptly after payment is received. You will be notified immediately should there be any delay in shipping. Terms and Conditions Contact By placing a bid you are entering into a binding sales contract with me. If there is any problem or concern with your item please contact me within 48 hours of receiving your item. Please e-mail any questions.
|
|
|
Morse Metal Slitting Saw Side Tooth 6" X 3/32" X 1" #1842 High Speed Steel
Morse Metal Slitting Saw Side Tooth 6" X 3/32" X 1" 1842 High Speed Steel Dia. 6" Face Width 3/32" Hole 1" I Listed The Saw As Used But It Does Not Appear To Have Been Used. See Pictures) It Has Been Sitting On A Shelf In My Shop For About 15 Years And I Have Never Used It. MSC Catalog Page 699 Lists A Similar Saw Blade For $203.22. Thanks For Looking.
|
|