|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$12.99 Shipping Condition: New – Open box Location: Shakopee, United States Klutch Air Hydraulic Riveter Kit (47924). Order cancellations may also be subject to cancellation fee of 15% of the item value. Local pick-up sales must ... morebe paid in full prior to pick-up. 3.5 CFM average air consumption.
Buy It Now
Free Shipping Condition: Used Location: Yorktown, United States Air rivet setter.Actual item pictured.Be sure to view our other items for more great tooling finds.
Buy It Now
$7.96 Shipping Condition: Used Location: Riceville, United States Lot of (3) Cupped Straight Rivet. (zip 37370). P/N: M110-19-3/16. Overall Length: 5-1/2".
Buy It Now
$5.25 Shipping Condition: Used Location: Joplin, United States Olympic Gesipa RV3004 Blind Rivet Gage Gauge Bubl-tite Rivet Installation M1309. These are used but in very good condition. And don’t forget Free Shipping. ... moreShipped USPS First Class
Buy It Now
$6.50 Shipping Condition: Used Location: Canyon Lake, United States This is a like new 5/32" straight rivet set. It is 12" long. Gets into a lot of tight places. Made in the USA.
6d 2h 19m 19s 0 bids
$20.00 Now
$8.70 Shipping Condition: Used Location: Irwin, United States bucking bars are cast with ductile iron to insure non-porous finish which is very important in order to have a highly polished finished surface. They ... moreare heat treated to 38-42 RC and therefore can be repolished many times without changing hardness. This wide selection of sizes, shapes, and weights enables the aircraft builder to pick the proper bar for his job.Made in the U.S.A.
Buy It Now
$5.90 Shipping Condition: New Location: Haysville, United States HI UP FOR SALE IS A BRAND NEW AT100-2 3/32 STUBBY RIVET SET.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: This Rivet Has Strong Tension and Can Pull Aluminum Rivets, Iron Rivets, and Stainless Steel Rivets. The Self-priming Design Allows You to ... moreOperate It with One Hand, Which Saves Time and Effort. With Small Volume and Light Weight, You Can Use It in Hard-to-reach Places. Vent Valves Prevent Overloading and Extend the Service Life. Widely Used in the Decoration, Automotive, Container, Electrical Appliance, Instrument and Other Engineering Industries. Package List: 1 * Rivet Gun 4 * Nozzles 2 * Wrenches 1 * Dust Cover Specification: Item Type: Pneumatic Rivet Gun Material: Aluminum Alloy Rivet Size: 1/8 "(3.2 Mm), 5/32" (4.0 Mm), 3/16 "(4.8 Mm), 1/4 '' (6.4 Mm) Air Inlet Thread: 1/4 "Npt Working Stroke: 16mm Maximum Pulling Force: 1200 Kgf Applicable Hose Diameter: 3/8 In.
Buy It Now
$5.90 Shipping Condition: Used Location: Goddard, United States 3/16" Offset Rivet Set#12 Aircraft Surplus- Used For large bore rivet guns Length: 3-1/2" Shank: 498" Type: 10 degree offset Rivet Size: ... more3/8" 12 Rivet Type: AN470. Boeing BB, universal head High quality USA made rivet sets made by either ATI or Magnavon. Style may vary somewhat depending on brand. These sets are used aviation surplus. Occasionally stems may have clearance grinds but shanks and faces are in good shape. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. See my for more rivet sets Typical Picture Quick Reference Guide to Store Categories. Click Title to go to Category
Buy It Now
$5.90 Shipping Condition: Used Location: Haysville, United States HI UP FOR SALE IS A LOT OF 3 RIVET SQUEEZER SETS ALL 3 ARE 1/8 SETS AT DIFFERENT LENGTHS. THE BODY LENGHTS ARE .120 & .370 & .363 (new still with wax ... moreon the head) ALL 3 HAVE A 3/16 DIAMETER SHAFT. ANY QUESTIONS OR CONCERNS FEEL FREE TO MESSAGE ME AND THANKS FOR LOOKING.
Buy It Now
Free Shipping Condition: Used Location: Riceville, United States ATI Straight Cupped Rivet. (zip 37370). P/N: AT100A-7-3/16. Length 7-1/2". It's often to late to solve them if you wait.
Buy It Now
Free Shipping Condition: New Location: Orlando, United States Manual riveter provides portable fastening:includes 4 interchangeable heads so that you have everything you need to start riveting. (5mm) Dia all-steel ... morerivets; stainless steel rivets are not for use with manually operated rivet tools.
Buy It Now
Free Shipping Condition: New Location: Nashville, United States As shown, new.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Pneumatic Air Riveter Hydraulic Pop Rivet Gun 1/8" 5/32" 3/16" 1/4"Riveting Tool There are three nozzles placed at the bottom of the rivet gun Description: ... moreThis Rivet Has Strong Tension and Can Pull Aluminum Rivets, Iron Rivets, and Stainless Steel Rivets. The Self-priming Design Allows You to Operate It with One Hand, Which Saves Time and Effort. With Small Volume and Light Weight, You Can Use It in Hard-to-reach Places. Vent Valves Prevent Overloading and Extend the Service Life. Widely Used in the Decoration, Automotive, Container, Electrical Appliance, Instrument and Other Engineering Industries. Specification: Item Type: Pneumatic Rivet Gun Material: Aluminum Alloy Rivet Size: 1/8 "(3.2 Mm), 5/32" (4.0 Mm), 3/16 "(4.8 Mm), 1/4 '' (6.4 Mm) Air Inlet Thread: 1/4 "Npt Workin.
6d 2h 19m 10s 0 bids
$25.00 Now
$7.15 Shipping Condition: Used Location: Irwin, United States Homemade bucking bar. Perfect for large aluminum and monel rivets. Easy to hold with a good weight to compete against the rivet gun
Buy It Now
$5.20 Shipping Condition: New Location: Claremore, United States A set of four (4) USA Manufactured (not imported)1/8 cupped squeezer sets - all with 3/16 shanks 1/4H x 1/2D. 5/8H x 1/2D.
4d 7h 22m 12s 0 bids
$7.99 Now
$16.40 Shipping Condition: Used Location: Highland Lakes, United States Bostik model K110 “pop” brand rivet tool for 1/8–5/ 32–3/ 16th pop rivets. Tool works as it should and has had light homeowner use.
Buy It Now
Free Shipping Condition: New Location: Huntington Beach, United States RAT640 Lock Bolt Gun (accepts Huck® Gun noses) This aggressively priced tool installs up to 1/4" Magna-grip® lockbolts and is capable of installing all ... morelockbolt and blind fasteners used in truck cab bodywork.
Buy It Now
$5.90 Shipping Condition: Used Location: Haysville, United States HI UP FOR SALE IS A LOT OF 6 RIVET SQUEEZER SETS ALL 6 ARE FLUSH SETS AT DIFFERENT LENGTHS. THE BODY LENGHTS ARE .250 & 266 & .280 & .630 & .765 AND .761. ... moreALL 6 HAVE A 3/16 DIAMETER SHAFT. ANY QUESTIONS OR CONCERNS FEEL FREE TO MESSAGE ME AND THANKS FOR LOOKING.
Buy It Now
$13.00 Shipping Condition: For parts or not working Location: Perry, United States Untested, sold as is unknown condition.
Buy It Now
$12.95 Shipping Condition: For parts or not working Location: San Jacinto, United States This is a RARE Gage Bilt GBP456 Hand Hydraulic Rivet Gun Riveter in very good physical condition. However, this tool is NOT WORKING. It might be an easy ... morefix but I don't know for certain. These detailed photos show the exact actual item you are buying.
Buy It Now
Free Shipping Condition: New Location: United States This handy air rivet gun kit will surely make those riveting projects a breeze and provides quick and comfortable operation to save your hands from tiring ... moreout. Rivet Gun Size: 28.5 x 10 x 16.5cm / 11.22 x 3.93 x 6.5".
Buy It Now
$5.99 Shipping Condition: New Location: Irving, United States New Power Pro Craft Hand Riveter Tool Metal HRk65 - 65 Pc Rivet Tool Kit SealedSee Picture For More Details
Buy It Now
Free Shipping Condition: New Location: Hebron, United States This handy air rivet gun kit will surely make those riveting projects a breeze and provides quick and comfortable operation to save your hands from tiring ... moreout. Rivet Gun Size: 28.5 x 10 x 16.5cm / 11.22 x 3.93 x 6.5".
Buy It Now
$5.99 Shipping Condition: Used Location: San Antonio, United States For 3/8 AN470 Rivets. -. 401 Shank. - Located on the top right of the page.
Buy It Now
$5.20 Shipping Condition: New Location: Claremore, United States A set of three (3) new 1/8 cupped squeezer sets - all with 3/16 shanks:USA Manufactured (not imported) New/Unused. 1/8H x 1/2D.
Buy It Now
Free Shipping Condition: New – Open box Location: Chino Hills, United States
Buy It Now
$16.00 Shipping Condition: Used Location: North Highlands, United States This is a vintage, used Cherry Rivet Tool #11565B-6C Aircraft Riveting tool. It seems to work great.
Buy It Now
$4.25 Shipping Condition: New Location: Canyon Lake, United States This is a 1/4-28 threaded solid carbide rivet shaver cutter. It has 16 flutes and is 1/2" in diameter. Will not chatter when shaving rivets.
6d 1h 7m 47s 0 bids
$300.00 Now
$37.20 Shipping Condition: Used Location: Apple Valley, United States This Thor Rivet Squeezer Alligator Clap, used in working condition. Shows signs of use (refer to pictures). Item has been tested. Thor pneumatic tools. ... moreAircraft tools.
Buy It Now
$4.69 Shipping Condition: Used Location: San Antonio, United States ATI Short FT Rivet Set. -. 401 Shank. - For 5/32 FT Rivets. - Located on the top right of the page.
Buy It Now
Free Shipping Condition: New Location: Richmond, United States 1pcs 5 in 1 Hand Riveter Pop Gun. Ergonomic grip for ease of operation. Ideal for working in hard to reach areas. Includes five (5) nose pieces: 1/8", ... more5/32", 3/16", 7/32", 1/4". Length: 12".
Buy It Now
$20.30 Shipping Condition: Used Location: Manchester, United States Rivet gun is in good used condition. ProSet 3400 air powered rivet gun. Gun is in good used condition. Has signs of wear and use. The back clear piece ... morecomes off with a couple screws there are 3 screw holes but only to two screws. So it's missing one of the screws. Nothing that will affect use. The clear plastic has tiny cracks near the screw holes. Seems to hold solid and no issues. Will detach for shipping. See pics a very nice high quality professional air powered rivet gun. It measures roughly 13" end to end, and roughly 12-1/2" tall and the base is roughly 4-1/4" and the air chuck sticks out 1-1/8". It's weight unpacked is 4-1/2lbs. Comes as seen in pics. Any questions just ask.
Buy It Now
Free Shipping Condition: New – Open box Location: Mountain Home, United States
Buy It Now
$5.99 Shipping Condition: Used Location: San Antonio, United States Flush Rivet Squeezer Sets/Dies. - All are 3/16 shank. - 15 sets/dies in total. - These are Boeing surplus. Not imported trash.
Buy It Now
$9.00 Shipping Condition: Used Location: Kent, United States FAST SHIPPING.
Buy It Now
$16.25 Shipping Condition: Used Location: Clermont, United States Good used rivet squeezer. Power cords plugs box covers accessories remotes wrenches chuck keys warranty cards receipts bar codes etc not included unless ... morepictured. IF YOU NEED IT FASTER ASK FOR ALTERNATIVES BEFORE YOU BUY.
Buy It Now
$45.00 Shipping Condition: Used Location: Chino Hills, United States Chicago Pneumatic Alligator Squeezer Compression Riveter CP-214 Description- Model: CP-214- Manufacturer: Chicago- Aluminum Capacity: 1/ 8" Steel ... moreCapacity: 3/ 32" Compression Capacity: 3000 lbs- Throat Depth: 1.5" Open Height: 1.5" Closed Height: 7/8" These riveters have been tested and are guaranteed to be in good working condition. You will randomly receive one of the 2 pictured. 6679( JK)11/9/12 Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with
Buy It Now
Free Shipping Condition: New Location: United States This handy rivet kit will surely make those riveting projects a breeze and provides quick and comfortable operation to save your hands from tiring out. ... moreRivet Size: 28.5 x 10 x 16.5cm / 11.22 x 3.93 x 6.5".
Buy It Now
Free Shipping Condition: New Location: Chino, United States Thi s cordless rivet gun will be a good helper in your work! It adopts a brushless pure copper motor, alloy steel, ensuring fast and high-quality retreat ... moreof nails, greatly improving work efficiency and accuracy.
Buy It Now
Free Shipping Condition: Used Location: Ellicott City, United States
Buy It Now
Free Shipping Condition: New Location: United States This handy rivet kit will surely make those riveting projects a breeze and provides quick and comfortable operation to save your hands from tiring out. ... moreRivet Size: 28.5 x 10 x 16.5cm / 11.22 x 3.93 x 6.5".
Buy It Now
$5.95 Shipping Condition: Used Location: San Jacinto, United States This is a used Allfast/Olympic RV882-4 Straight Rivet Gun Pulling Head in very good condition. This series of pulling heads fits a wide variety of rivet ... moreguns including the Cherry G-36 and HBM-122 type hand riveters.
Buy It Now
Free Shipping Condition: Used Location: Bismarck, United States Assorted Rivetkarsert.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: This Rivet Has Strong Tension and Can Pull Aluminum Rivets, Iron Rivets, and Stainless Steel Rivets. The Self-priming Design Allows You to ... moreOperate It with One Hand, Which Saves Time and Effort. With Small Volume and Light Weight, You Can Use It in Hard-to-reach Places. Vent Valves Prevent Overloading and Extend the Service Life. Widely Used in the Decoration, Automotive, Container, Electrical Appliance, Instrument and Other Engineering Industries. Package List: 1 * Rivet Gun 4 * Nozzles 2 * Wrenches 1 * Dust Cover Specification: Item Type: Pneumatic Rivet Gun Material: Aluminum Alloy Rivet Size: 1/8 "(3.2 Mm), 5/32" (4.0 Mm), 3/16 "(4.8 Mm), 1/4 '' (6.4 Mm) Air Inlet Thread: 1/4 "Npt Working Stroke: 16mm Maximum Pulling Force: 1200 Kgf Applicable Hose Diameter: 3/8 In.
Buy It Now
Free Shipping Condition: New Location: United States It is possible to connect two or more layers of different materials and different thicknesses. Rivet:Aluminum Rivet/Steel Rivet. Rivet Pulling Force:1850 ... morekgs. Riveting Capacity for Aluminum Rivet:2.4mm(3/32")/3.2mm(1/8")/4.0mm(5/32")/4.8mm(3/16").
Buy It Now
Free Shipping Condition: New – Open box Location: Chino Hills, United States You are purchasing 1 unit only, originally manufactured by Martin Aircraft in USA.
$24.99 Shipping Condition: Used Location: Watkinsville, United States SPEEDAIRE 45RM38. - Aluminum 3/32 in, 1/8 in, 5/32 in, 3/16 in, Blind Rivet Dia. - Stainless Steel 3/32 in, 1/8 in, 5/32 in, 3/16 in, Blind Rivet Dia. ... more- Steel 3/32 in, 1/8 in, 5/32 in, 3/16 in.
Buy It Now
$8.65 Shipping Condition: New Location: Phoenix, United States You get what is in the photos.
Buy It Now
Free Shipping Condition: Used Location: Minneapolis, United States HAND SQUEEZE RIVETING KIT. Stainless Steel Texas hand squeeze with 1 1/2" and 3" Yoke. VERY lightly used and complete kit. No rust, defects, or issues. ... moreAll parts have a like-new appearance. Includes 3 extra rivet sets and a billet aluminum block I made for keeping the sets organized and makes it very convenient to toss in your tool bag.
Buy It Now
Free Shipping Condition: New Location: West Valley City, United States Store Categories. Click to close full size. CHICAGO PNEUMATIC CP9882 Air Riveter.General,2110 lb. CHICAGO PNEUMATIC. Item Specifics. Item. Air Riveter. ... moreType. Includes. 4) Nosepieces 3/32" 1/8" 5/32" 3/16" and Twist Off Cup for Storage. Construction. Composite. Item. Air Riveter. Length. 8-13/16" Height. 6-1/2" Max. Pressure. 90 psi. Dia. 3/16" Tool Weight. 3.30 lb. Duty. General. CFM per Stroke. 1. Pulling Force. 2110 lb. Air Inlet. 1/4" NPT. Min. Hose Size. 3/8" Blind Rivet Dia. 1/8" 5/32" 3/32" and 3/16" Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less that $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns Once your order is placed you will not be able to cancel the order. Once you receive the item. Please contact the Zoro Tools customer service team to obtain a return authorization(RA) number and a free shipping label. If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer service hours are Monday through Friday from 7:00 a.m. to 7:00 p.m. CST) About Us We understand the need for small businesses to stay competitive by not paying high prices for the products you need to keep your business running. By offering one price to all customers with no c
Buy It Now
$5.25 Shipping Condition: Used Location: Wichita, United States 3/16” AN470 BB6 Rivet Set. For Standard AN470 BB Head Rivets!401 Shank! Fits all Standard Rivet Guns! These are the best! Boeing Surplus!
Buy It Now
Free Shipping Condition: New Location: Huntington Beach, United States RATCCKIT High Shear & Huck Collar Splitter Kit Use with your rivet gun to easily remove Huck and Hi-Lok type collars. Shank: 0.401" Size includes 3/16", ... more1/4", 5/16" & 3/8" Overall Length: 5 1/2" Use with your rivet gun to easily remove Huck and Hi-Lok type collars.
Buy It Now
$30.57 Shipping Condition: New Location: Romulus, United States Pneumatic Air Shockless Riveting Hammer Model: 493CSR-R Shank: 401" BPM: 3000 Air Consumption: 15 Cfm Piston Stroke: 19 X 46mm Air Pressure: 90 Psi ... moreRecommended Hose Size: 1/4" ID Air Inlet: 1/4" This tool is new and will come with a 30 day warranty that begins on the day you receive it.
Buy It Now
Free Shipping Condition: Used Location: Riceville, United States Cupped Straight Rivet. P/N: MM110-18-5/32. (zip 37370). Length: 7-1/2". It's often to late to solve them if you wait. Free S+H (Within the U.S.A.).
Buy It Now
$6.80 Shipping Condition: New Location: Modesto, United States With over 62 years of assistance in the aerospace industry. If it was our error, we will make it right.
3d 3h 51m 41s 0 bids
$975.00 Now
$18.35 Shipping Condition: New Location: Hattiesburg, United States The Gesipa Firebird Rivet Gun is a high-quality tool that is perfect for professional use. It is a reliable and efficient tool that can handle a variety ... moreof applications. This rivet gun is designed to deliver consistent performance and precision. The 14.4-volt battery provides ample power to get the job done quickly and efficiently. The gun is lightweight and easy to handle, making it a great choice for both beginners and experienced users. This tool is perfect for use in a variety of industries, including construction, automotive, and aerospace. It is also a great choice for DIY enthusiasts who want to tackle their own projects. Whether you need to install sheet metal, aluminum, or other materials, the Gesipa Firebird Rivet Gun is up to the task.
Buy It Now
$20.00 Shipping Condition: Used Location: Kent, United States FAST SHIPPING
Buy It Now
Free Shipping Condition: New Location: United States N POWER POP RIVETER: Air hydraulic drive design, more labor-saving, more durable. Bike Cushion Back Support Electric Bicycle Saddle Backrest Simple Seat ... moreCushion. Cycling Bike Repair Tool Kits Bicycle Chain/Bottom Bracket/Crank Puller Remover.
Buy It Now
$40.00 Shipping Condition: Used Location: Canyon Country, United States Atlantic Air Tool Pneumatic Rivet Squeezer Alligator 30A
|
|
|
|
LOBSTER 85-100 PSI AIR RIVETER, AN-200
Concepts Industrial LOBSTER AIR RIVETER FOR PARTS OR NOT WORKING AN-200 85-100 PSI ITEM SHOWN IS A REPRESENTATIVE UNIT, CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS& FOR ADDITIONAL INFORMATION. 126. KF SW 8 02/03/14. We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/not working are sold as is and no ... morereturns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. Return policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received without prior written approval. Customer Service is available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours! On Feb-03-14 at 10:15:03 PST. Seller added the following information:
|
|
|
Cornwell CATPR14 1/4" Air Riveter
Very Clean Cornwell CATPR14 1/4" Air Riveter. Works great. Comes just how you see if. What you see in the photos is what you get. If you have any questions please ask. Thanks
|
|
|
Atlantic Aircraft Tool Co. 60 A Alligator Squeezer Compression Riveter
Bidding on a Atlantic Aircraft Alligator Compression Riveter. Model 60A. This item is used but in good working condition. It also comes with the pictured attachments. Compression capacity is 3.400 lbs. aluminum capacity is 1/8 inch. Cylinder style is tandem. All of my items guaranteed fully operational. My goal is customer satisfaction. Please do not hesitate to contact me with any questions or concerns. The buyer is responsible for return shipping. Happy bidding and NO RESERVE. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1440acde88a-0xf8-
|
|
|
CLASSIC ELGEN RIVETER KIT-#200
This is a classic Elgen Riverter kit. Assorted rivets are included. Box is in fine shape. paperwork is intact. PayPal account holders only. Lower 48 states only. Please ask any questions before bidding. Posted with
|
|
|
Chicago Pneumatic Alligator Head Squeezer Compression Riveter CP-214 Rivet Tool
Up for sale I have this Riveter. It is in good working condition with regular use wear. Check out the pictures. Thanks. Posted with
|
|
|
CHERRY MAX HYDRAULIC RIVETER G749A
This is a hydraulic Cherry Max hand riveter with pulling head. In GREAT condition. Included is carrying case. Servicing tube and syringe, rivet gage, 2 additional head sets. Never used the additional head sets, do not know if operational. Will still include. Tooling and case have my personal ID grinded off. Sold as is. Any questions please ask. Posted with
|
|
|
CHICAGO PNEUMATIC CP-0351 COMPRESSION ALLIGATOR SQUEEZE RIVETER
TERMS AND CONDITIONS; All products are SOLD AS IS and UNABLE TO TEST unless otherwise noted in the description. Please read complete description and look closely at photos. Please ask all questions. Or request additional information prior to bidding on items. All sales are final, and all products are sold without warranties or guarantee, and no returns are accepted. Shipping Insurance included in Shipping and Handling. All items will be shipped no later than the next business day after CLEARED payment is received by 4pm EST, Monday through Friday. You are bidding on a USED CHICAGO PNEUMATIC CP-0351 COMPRESSION ALLIGATOR SQUEEZE RIVETER. 2" DEPTH 5" THROAT. SEE PHOTOS) 4-D Please Visit Our Ebay Store For More Items!
|
|
|
Central Pneumatic 3/16" Air Hydaulic Riveter
The item up for auction is a Central Pneumatic 3/16" Air Hydraulic Riveter. The item. To me, does not look like it has been used, but I still listed it as used since I did not purchase the item from a retail dealer. Specifications; Recommended Working Pressure- 90 PSI Average Air Consumption- 3 CFM Air Inlet- 1/4" 18 NPT Max Pull Force- 2,800 lbs Includes 4 Nosepieces for rivets: 3/32" 1/8" 5/32" 3/16" Requires hydraulic oil(NOT INCLUDED) All of our items come with a return policy so that there is no risk to the buyer. As we are new to E-Bay, if you are not satisfied with your purchases, please contact us before leaving feedback so that we will have the opportunity to correct all purchases to a possitive ending. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
DAYTON PNEUMATIC 3/16" AIR RIVETER MODEL 4CA31 WITH 1/8" BLACK POP RIVETS USED
UP FOR AUCTION IS ONE DAYTON 3/16" PNEUMATIC AIR RIVETER MODEL NUMBER 4CA31 IN LIKE NEW CONDITION. COMES WITH 3 DIFFERENT SIZE TIPS. 2 WRENCHES, CATCH BOTTLE AND A BOX OF APPROXIMATELY 4000 BLACK 1/8" X 3/8" LONG RIVETS. TOOL WAS BOUGHT A SPECIFIC JOB( APPROXIMATELY 6000 RIVETS) AND NEVER USED AGAIN, STILL IN THE ORIGINAL BOX. THIS IS A USED TOOL THAT WORKS PERFECTLY WE WILL DESCRIBE THE ITEMS AND THERE CONDITION TO THE BEST OF OUR ABILITY. SO PLEASE READ THE DESCRIPTION AND LOOK CAREFULLY AT THE PHOTOS TO BE SURE OF EXACTLY WHAT YOU ARE BIDDING ON. WE WILL COMBINE SHIPPING IF YOU WIN MORE THEN ONE AUCTION. IF YOU HAVE ARE THE WINNER OF AN AUCTION AND YOU ARE INTERESTED IN ANOTHER ITEM THAT HAS NOT ENDED YET. JUST LET US KNOW AND WE WILL SEND YOU A COMBINED INVOICE WHEN YOU ARE DONE BIDDING. WE WILL NOT END ANY AUCTION EARLY ... moreSO PLEASE DO NOT ASK. WE BELIEVE IN LETTING ALL AUCTIONS RUN THERE COURSE TO BE FAIR TO ALL BIDDERS AND POTENTIAL BIDDERS. ALL PAYMENTS MUST BE RECEIVED WITHIN 8 DAYS OF THE END OF THE AUCTION OR EBAY WILL AUTOMATICALLY OPEN A UNPAID ITEM CASE. THANK YOU. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
PRG510 PNEUMATIC AIR POP RIVETER RIVET GUN TOOL (Made in USA) USATCO
RG510 PNEUMATIC AIR POP RIVETER RIVET GUN TOOL(Made in USA) n Nice Condition with scratches scuffs and wear. Please. See the last picture, which shows other related items for sale, which are NOT part of this bid, but available on my other listings or upon inquiry. Was purchased by my
|
|
|
Huck 352 Pneumatic Rivet Gun (Riveter) w/ Huck 99-2701 Nose Assy. Assembly
Huck 352 Pneumatic Rivet Gun& Huck Nose Assy. 99-2701 The gun is in great condition. It was last used 6 months ago and worked perfectly. The nose assembly was purchased and installed less than 50 rivets. Please do not hesitate to contact me if you have any questions. There will be free shipping and will be sent USPS Priority. Signature confirmation will be provided for a safe and secure delivery. Thank you for your business. Have a Blessed day.
|
|
|
~Pre-Owned~CHICAGO PNEUMATIC CP9882 Air Riveter~
Pre-Owned CHICAGO PNEUMATIC CP9882 Air Riveter.Used twice.Does not come with instructions. Or original box. PLEASE READ THIS BEFORE PLACING YOUR BID. THANKS!
|
|
|
Chicago pneumatic riveter air compression C-Yoke T9115
This item is a used t9115 air compression c-yoke pneumatic riveter made by chicago pneumatic tool company. Item in great shape. Heavy duty.
|
|
|
CherryMax Riveter Huck Gun Model no: G684A w/ a CherryMax Pulling Head H681-6C
For sale is a Cherry Max Riveter Huck Gun comes with a Cherry Max Pulling Head H681-6C. 3/16" Model no: G684A Serial no: 5-254. Tool is used but in good working condition. Previously owned by Aerospace manufacturers. Free shipping within the U.S. Can ship worldwide, but will be a calculated cost. Sales tax applied to Georgia residents. Email with any further questions.
|
|
|
CHICAGO PNEUMATIC 5XB AERO RIVETER
Used Cp5XB rivet gun. In good condition, air fitting adapter in handle has been oversized due to threads being damaged, but its a solid fix and gun operates properly.
|
|
|
CherryMax G744 power riveter
DETAILS FOR G744 The Cherry G744 is a pneumatic-hydraulic tool designed specifically for the most efficient installation of 1/4” CherryMAX® rivets. However, with the proper pulling heads and adapter. This tool can install other sizes and types of rivets. This tool utilizes straight. Offset and right-angle pulling heads. Extensions are available for extending the pulling heads to reach limited access areas. Refer to the pulling head section for the correct pulling head part number for the rivet to be installed. Its all metal housing makes this tool extremely durable for use in a shop environment. It can be operated in any position with one hand. SPECIFICATIONS FOR G744. Cherry Aerospace’ CHERRY) policy is one of continuous development.Specifications shown in this document may be subject to change which may be introduced after publication. ... moreFor the latest information always consult CHERRY. AIR PRESSURE 90 to 110 PSI(6.2 to 7.6 bar) STROKE 0.625 inch(15.88 mm) PULLING FORCE 3800 Pounds(16.90 kN) 90 PSI(6.2 bar) CYCLE TIME Approximately one second. WEIGHT 7 Pounds(3.18 kg) NOISE LEVEL 72 dB(A) AIR CONSUMPTION 0.31 SCF/cycle(8.78 L/cycle) Pulls CherryMAX® rivets from 1/8" tru 1/4" diameter. Pulling heads are not included. But can be purchased separately. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1442d142fa5-0x100-
|
|
|
accubird 14.4 volt cordless pop riveter by Gesipa
This is a very lightly used cordless pop riveter. Everything works like new,I don't need it anymore but was very pleased with it when I used it.It has 4 different size heads, battery holds up good. I'm willing to give someone a good buy compared to new,and it is like new, but I do have a reserve price.
|
|
|
General Pneumatic 6000A Air Rivet squeezer riveter riveting tool gov't surplus
Used General Pneumatic riveting tool. $14 shipping to the US
|
|
|
EMHART POP RIVETER MODEL 2100 WORKS GREAT #1
EMHART POP RIVETER MODEL 2100 WORKS GREAT#1 EMHART POP RIVETER MODEL 2100 WORKS GREAT PLASTIC CUP AT THE END IS MISSING IT IS IN GOOD WORKING CONDITION THIS UNIT SELLS FOR OVER $800 NEW. All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ... moreISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
Tool Aid Heavy Duty Multi Head Rivet Gun Riveter
Tool Aid Heavy Duty Multi Head Rivet Gun Riveter Product Description: Tool is used. Has scratches/scuffs and signs of use(see photos) Sold as pictured, Shipping and Handling is Calculated Using the eBay Calculator(below) US shipping only! Please note: All items are inspected thoroughly before listing and shipping to be verified that they are as described here. All outgoing packages are inspected thoroughly before shipping to assure that they are packed according to USPS and UPS shipping guidelines. Pictures may be representative of the item and not the"actual" item offered for sale; such is especially the case with"stock" photos. Box art. Manufacturer design and such may vary. All items are sold"as is. We are not experts and product specs may be unintentionally inaccurate, buyer should research with manufacturer before ... morebidding- no returns for errors of this nature. If you bid, you are entering into a legally binding contract and you agree to our terms. Thank you, and happy bidding! Please read our terms and policies( http:stores.ebay.com/tcspawnco/Our-Policies.html) carefully before bidding. On Jun-13-12 at 08:56:04 PDT. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Chicago Pneumatic CP-0214 CENEL C-Yoke Compression Riveter Tool With Yoke
CP-0214 CENEL C-Yoke Mount Compression Tool. Comes with yoke that has 1.25" throat gap x 1.5" reach. This is the last unit I have and it is in good working condition. It has some scuffs and scrapes and peeling paint but should perform well.
|
|
|
HEAVY DUTY Chicago pneumatic riveter air compression C-Yoke T7772
This item is a used t7772 air compression c-yoke pneumatic riveter made by chicago pneumatic tool company. Item in great shape. Heavy duty.
|
|
|
Air Pneumatic Chicago Rivet Riveter Setting Machine #174 .130 2765 8283 2878
Chicago Rivet Pneumatic Model 174 S/N 810-SS Part# 618-017-0 Size.130 Jaws 2765 Anvil 8283 Some parts have slight surface rust from storage. Any questions please email or feel free to call Delaney's Surplus at 608-643-8009 Closed Tuesdays and Wednesdays. If buying and needs freight. Please email your zip code and if it is a business with a dock or residential that needs a lift-gate. When you purchase item. Please inform us if the item will be shipped to a business with a dock or resitential that will need a lift-gate service. If you do not inform us, we will bill freight shipping at a residential rate. Stock# 021914J.
|
|
|
Electric Chicago Rivet Riveter Setting Machine #449 .187 166 87 863
Chicago Rivet Electric 1/3 HP 115/230v Model 449 S/N 690-SS Size.187 Jaws 87 Anvil 166 Driver 863 RPM Max/Min 175-150 Some parts have slight surface rust from storage. Any questions please email or feel free to call Delaney's Surplus at 608-643-8009 Closed Tuesdays and Wednesdays. If buying and needs freight. Please email your zip code and if it is a business with a dock or residential that needs a lift-gate. When you purchase item. Please inform us if the item will be shipped to a business with a dock or resitential that will need a lift-gate service. If you do not inform us, we will bill freight shipping at a residential rate. Stock# 021914N.
|
|
|
Pneumatic Chicago Rivet Riveter Setting Machine #174 .125 2765 8283 2878
Chicago Rivet Pneumatic Model 174 S/N 640-SS Size.125 Jaws 2765 Anvil 8283 Driver 2878 Some parts have slight surface rust from storage. Any questions please email or feel free to call Delaney's Surplus at 608-643-8009 Closed Tuesdays and Wednesdays. If buying and needs freight. Please email your zip code and if it is a business with a dock or residential that needs a lift-gate. When you purchase item. Please inform us if the item will be shipped to a business with a dock or resitential that will need a lift-gate service. If you do not inform us, we will bill freight shipping at a residential rate. Stock# 021914K.
|
|
|
TEXTRON AVDEL 750 7500 Hydro-Pneumatic Air Power Riveter Rivet Gun 1/4"
Avdel 750 hydra-pneumatic placing tool designed to install lockbolts. It has 1/4" Stamped on the nozzle Nice Condition as shown i really dont know much about this tool Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive. I go to the post office at everyday at 1.00pm Monday- Friday. If an item is bought and payed for before then item will be send it the same day. If any later it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please visit and subscribe to my eBay Store and Facebook Page for more great items and friendly. Reliable customer service. And Great deals. Thank You For Viewing:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1445be65992-0x10d-
|
|
|
Pneumatic Squeeze , Chicago No.3x Riveter with lot
Atlantic Air Tool Co Pneumatic Alligator 3" jaw Squeeze Chicago No.3x Aero Riveter Panduit GS2BL Tension(new) Castro stick wax lubricant 15 oz(new) Marco straight cutters Allen hi-lok remover(new) Hole finders#30. 10(new) Hole cutters 1" 3/4" new) Wire brush(new) Mil bar jet wire twister Ms20470ad5-5a rivets Rivet sets- AN470- flathead- new) Squeeze sets( new) Bucking bars Rotary files(new) G29 cherry hand riveter Sealer roller(new) Micro countersink Pancake 90° set EZ outs( new) Alligator cleco clamps Deburr hook(new) Ect.
|
|
|
CHERRYMAX TEXTRON G784 RIVET PULLER GUN AIRCRAFT PNEUMATIC RIVETER CHERRY
HI YOU ARE BIDDING ON A USED CHERRY TEXTRON CHERRYMAX G784 RIVET PULLER GUN. EVERYTHING WORKS GREAT WITH NO PROBLEMS PULLING& IS IN GOOD OVERALL CONDITION(SEE PICS) ALSO HAS AN ADJUSTER ON THE BACK FOR STEM BREAK POSITION. AUCTION INCLUDES WHAT YOU SEE IN THE PICTURES. THIS MILITARY SURPLUS AVIATION POP RIVET GUN RETAILS FOR $3000+(NEW) I'M STARTING THE BID OUT@ ONLY $.01 W/ NO RESERVE! THANK YOU FOR LOOKING AND GOD BLESS! CHECK OUT MY OTHER AUCTIONS! I REQUIRE PAYMENT WITHIN 3 DAYS OF END OF AUCTION. BUYER IS RESPONSIBLE FOR ALL S&H CHARGES. SORRY I DO NOT SHIP TO P.O. BOXES. I HAVE LISTED THIS AUCTION TO THE BEST OF MY ABILITY. IF YOU HAVE ANY QUESTIONS FEEL FREE TO ASK AND I WILL ANSWER THEM THE BEST I CAN. THANKS KEYWORDS: SIOUX. SNAP-ON, SNAPON, STARRETT, ATLAS COPCO, CHCAGO, INGERSOLL RAND, MILWAUKEE, MAKITA, AVIATION, AEROSPACE, ... moreAIRCRAFT, AUTO, VEHICLE, MECHANIC, DESOUTTER, RIVET, CLECO, CHERRYMAX, STRUCTURES, SHEETMETAL, COMPOSITE, ATS, DRILL, PNEUMATIC, AIR TOOL, DOTCO, HI-LOK, CRAFTSMAN, MACHINIST, MACHINING, METAL, TOOLING, TOOL, INSPECTION, MANUFACTURING, PRECISION, RATCHET, WRENCH,
|
|
|
HUCK POWERDRIVE A209 BLIND FASTENER RIVETER
One HUCK POWERDRIVE A209 BLIND FASTENER RIVETER For TIght places and Aircraft Interior riveting- Blind Rivets. From Aerospace Company- Clean. Original Box. Hydraulic Rivet Installation Tools. Compatcly designed with offset end for intsalling fasteners in limited clearance applications. WIth proper nose assembly installs a wide range of Hick Blind Fasteners and HUCKBOLT Fasteners. Separate now assembly is neede for each size and tups. Alum, steel titaitnium up to and including 1/4 inch. Original cost about $3200 in 2014 adjusted dollars. Requires Huck POWERRIG Hydralic Unit(like(904. 921 see on ebay, adanced, completed sales checked) We beleve this has 12 foot of hose and an Air operation switch. button. SEE PICS. SEE and READ OUR TERMS CAREFULLY. Because ONLY what's in the pictures applies and is the description. Understand this requires ... morecertain operating hydr. pressure and must use POWERRIG by HUCK. That can cost used about $2000-5000. REF b 40220-22 R TERMS: Read terms carefully: Buyer signifies full understanding. Acceptance of and agreement to ALL these terms by bidding. Picture Gallery Represents Full Disclosure and description of this Item Sold AS-IS. Pictures take precedence over all text description. Buyer Pays All Shipping. Add Packing Charge of $_5_ FOB Richardson TX 75081 If you have any questions, call 214-680-8328 before bidding. Or waive all questions in regard bidding. Your bid signifies your full understanding of these terms and your promise to promptly pay for item within 3 days of invoice under these terms and abide by these terms. We do not ship international unless we state that. Or you ask before bidding. If international. We may add up to $20 for paperwork. You pay all packing costs(such as special crating or box for international shipping) All text description is ONLY our BEST GUESS and what you see is what you get. Items are sold AS IS-WHERE IS- no returns(just like a real auction) Over 99% of our items have been good. As from shut down or moved operations of corporations
|
|
|
DAYTON PNEUMATIC RIVETER MODEL #4Z913 - AIR RIVET GUN - 4Z913 - TESTED & WORKING
Selling a used Dayton model#4Z913 pneumatic rivet gun. Good overall shape and fully functional. No other accessories included- just what you see in the pictures. Rated at 100psi max.
|
|
|
Atlantic Air Tool "C" Rivet Squeezer Riveter 60C
ABOUT: Company Atlantic Air Tool Pneumatic Compression Riveting Tools and Accessories are designed. Tooled, and manufactured under strict quality control insuring precision and unequaled performance. All Portable Pneumatic Tools are equipped with Safety Backheads. ATLANTIC AIR TOOL INNOVATIONS 1982- Developed no hole feathering valve for models 30 and 60 rivet squeezers and their equivalent tools.1983- Designed and manufactured first triple cylinder(90A) First squeeze riveter to weigh less than 8 pounds and produce 9000 psi(90A-A15HD)1983- Designed and manufactured heavy duty bearings for 90A. Can also be used in 30 and 60 model rivet squeezers and their equivalent.1989- First 12 inch reach bench riveter.1996- First with available heavy duty bearing in 30C and 60C riveters.1997- First 18 inch bench riveter.1999- First squeeze riveter convertible ... morefrom alligator type to"C" unit type utilizing the same wedge(Model 444 squeeze riveter)1999- First riveter with swivel cylinder head(Model 444)1999- First riveter in alligator type and"C" unit type utilizing the same roller bearings(Model 444 squeeze riveter) Atlantic Air Tool"C" Rivet Squeezer Riveter 60C Specifications- Model: 60C- Aluminum Capacity: Steel Capacity: Yoke Reach: Current Yoke Gap: Max Force at 90PSI: 6000 PSI- Overall Length: 16" Weight: 8 lbs- Please note the one you receive may be cosmetically different than the one pictured- Tested and is working great! This item comes with 5 cases thousands of rivets to start doing manys jobs good luck look at pictures to make your own judgement. This item sold as is. About Us Here at Port St Lucie& Stuart FL, we specialize in buying and selling Estate Jewelry, Watches, Antiques and Collectibles, basically anything of value for over 30 years. We have a few galleries in beautiful Martin& Saint Lucie County, FL. We strive to provide you with the highest quality of goods and customer service, at the best prices online! If you have any questions about our items, please do no
|
|
|
Huck 352 Pneumatic Rivet Gun Riveter Pulls C6L Huck Bolts I.S.D 99-1000 LockBolt
Huck 352 Pneumatic Rivet Gun Riveter Pulls C6L Huck Bolts I.S.D 99-1000 Good Working Condition as shown in photos Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive. I go to the post office at everyday at 1.00pm Monday- Friday. If an item is bought and payed for before then item will be send it the same day. If any later it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please visit and subscribe to my eBay Store and Facebook Page for more great items and friendly. Reliable customer service. And Great deals. Thank You For Viewing
|
|
|
Huck 200 Rivet Gun Riveter with Metal Case and Manual Nice Condition
I ship in 1 business day of payment receipt with tracking information. Huck 200 riveter in good working condition, shears up to 1/4" blind rivets. Pulls a double action blind rivets typically used in aircraft. Table 14 SPECIFICATIONS(Without Nose Assembly) Length overall)71/2Inches. 190 mm. Height(overall) 13-7/8 inches.352mm. Width(head) 2 inches. 51mm. Width(cylinder) 4.3/4 inches.121 mm. Weight.10-1/2 pounds. 4.8kg. Stroke.1-3/16 inches. 30mm. Air required.18CFM@ 009 m3/s. 90-100 psi.620-689 kPa. Hydraulic fluid Automatic Transmission Fluid. AT-ATF-142. Operation as A Double Action Tool. When the tool is connected to an air supply and the trigger(3-31) is depressed. Air pressure acts on the air piston(3-44) and moves it forward. This causes the small hydraulic piston(3-40) to act on a volume of hydraulic fluid in the handle assembly(1-4) ... morePressurized fluid is forced into the head assembly(1-1) to move the pull piston(2-21) in conjunction with the nose assembly to start the fastener installation. Pressurized fluid is also acting on the shift piston(2-12) and shift valve(4-19) whose shift force is controlled by the shift spring(4-29) and adjustment of the shift valve adjusting screw(4-30) As the fluid pressure increases, the shift valve opens and allows the fluid resisting movement of the shift piston(2-12) to exhaust. The shift piston moves forward and acts on the thrust bushing and inner anvil of the nose assembly to drive the lock of the fastener. Continued travel of the air piston increases the hydraulic pressure, causing the pull piston to continue its travel. This causes the pintail of fastener to break off and the installation is complete. the trigger is released and all components return to their original position and the cycle is complete. Operation As A Single Action Tool. The tool operates the same for installing other blind rivet
|
|
|
Antique Rex #27 Rivet/Punch Hand Riveter w/Rivets - USA
This is a great working old rivet press that has the original price tag on it for $28.08. There is a partial old box of black colored rivets that is printed: 50 Japanned tubular rivets. Trade"LX" mark. There is a Acme Rivet and Machine Co. No 1 tube of rivets that is marked 8/16" Made in NJ, USA. It weighs 2 lbs. 6 oz. There is also(5) 1" long copper nails. The price tag is still legible and we taped on a small piece of tape to hold it on as it was getting brittle from age. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1447e232d21-0xff-
|
|
|
TOOL AID MANUAL RIVETER
UP FOR SALE IS A TOOL AID MANUAL RIVETER. THIS ITEM IS USED WITH SOME WEAR AND IS IN GOOD WORKING CONDITION. NICE FOR THOSE SMALL JOBS AROUND THE SHOP. PLEASE SEE PICTURES FOR MORE DETAILS OR EMAIL.
|
|
|
Central Pneumatic Air Riveter Stock No. 167 Blue Excellent Condition
Central Pneumatic Air Riveter Stock No. 167 Blue Item was obtained from an auctioned storage locker. Well kept. Excellent condition. See pictures for more details. We try our best to provide you with an informative item description and we include multiple pictures from multiple angles for more details. Please let's know if you have any questions before bidding or buying. We want our buyers to be fully satisfied with their received packages. Please let's know ASAP should you have any issue with the transaction to ensure your full satisfaction. And we would love and appreciate your positive feedback and 5 stars on all Detailed Seller Ratings. Many thanks in advance. Posted with
|
|
|
Cherry Aerospace G750A Hand Hydraulic Riveter/Rivet Gun
| | | | Click to close full size. Cherry Aerospace G750A Hand Hydraulic Riveter/Rivet Gun. Make: Cherry Aerospace Model: G750A Condition: Used/Lightly Used- This item has been used but is still in decent condition. This item will be working mechanically(if applicable) but can have some signs of wear to the exterior(Ex. Light scratches. Scuffs or marks) Auction includes: Item as pictured. Guarantee: 30 Day satisfaction guarantee. Sales tax must be collected for all Texas. Tennessee, Illinois, Washington, Nevada, and Florida buyers. We are unable to accept orders from resellers. Store | About Us | Shipping | Payment | Terms of Sale | FAQ 213778.1 1353 JG Order: 45758 About Us Cash America Internet Sales. Inc. is an affiliate of Cash America International, a NYSE company. Cash America has been operating pawnshops and providing specialty financial ... moreservices for more than 25 years. Cash America currently has more than 1,000 locations in the United States and Mexico, operating under the brand names Cash America Pawn, SuperPawn, Cashland, and Prenda Facil. Please browse through and bid on our items with confidence. Our primary focus is customer satisfaction. Please contact us during or after the auction as we will do as much as possible to ensure satisfaction. All items will be shipped quickly and professionally. We make the buying experience as easy as possible to earn your positive feedback. Feel free to email any questions not answered in the listing. Shipping We ship to all fifty states and any country listed in ebay's Global Shipping program. This item will be shipped via USPS Priority or UPS ground for large items. Shipments will only be made to confirmed PayPal addresses. US Shipping Our goal is to ship within three(3) days of PayPal receipt of payment. And we guarantee it will leave our store within three(3) business days. Shipping time with UPS Priority is generally 2-6 business days and we will email the tracking information when shipment is made. Expedited shipping is available for additional costs at t
|
|
|
Dayton pneumatic riveter model 4Z512
This unit looks like it was not used much at all. I hooked it up to air(90 psi is the recommended pressure) and it seems to function perfectly although I don't have heavy rivets to test it with. I only have the one nose pc. and no wrenches or manuals for this unit. The nose pc. in it is for 1/8 to 5/32 in. rivets. This unit will do up to 1/4 in. rivets and has 3200lbs of jaw power according to specs I found. It is considered an industrial grade riveter. The tag on the unit says Heavy Duty Riveter Dayton Electric Mfg. Co. Chicago U.S.A. Model 4Z512 serial number 375757. From what I could find. These were sold by Grainger Ind. Supply years ago for around $600.00. Selling as is. Good luck and happy bidding.
|
|
|
120V Lobster ER-300N Electric Riveter w/ Case
LOBSTER RIVETER ER-300N. Lobster Tool’s electric rivet guns are ideal for repair shops. Modular office system assembly, heating ventilation and air conditioning and other onsite construction applications. ER-300N Features: Sets up to 3/16” diameter in all materials•Locked trigger option for continuous use•Durable construction for field use•Ultra jaws for longer jaw life
|
|
|
US Industrial tool 114 style rivet squeezer, squeeze, riveter
Used US Industrial US114TC rivet squeezer unit with no yoke or ram. It actuates normally when throttle is depressed but is listed for parts because it can not be tested without the missing parts.
|
|
|
Chicago Tool Air Riveter W/Cup V#3200/ATR1401ABA
Chicago Tool Air Riveter W/Cup V#3200/ATR1401ABA in used condition and good working order. Riveter shows signs of rust and heavy wear but it is in overall good working order and good condition.
|
|
|
HUCK 350 FASTENING SYSTEM (RIVETER)
THIS ITEM IS USED BUT STILL IN GOOD WORKING ORDER. COMES AS PICTURED. ATTENTION BUYERS" WE ONLY SHIP WITHIN THE USA 48 STATES.I WILL SHIP TO ALASKA. HAWAII AND PUERTO RICO IF YOU CONTACT ME FOR SHIPPING PRICE. CHECK OUR FEEDBACK SCORE AND BID WITH CONFIDENCE! SHIPPING INFORMATION Our business hours are Monday thru Friday 10 a.m. to 2 p.m. E.S.T. Pickup is preferred during these hours. But we will gladly arrange to be here at anytime. 24/7. We ship with USPS, UPS and FedEx. Insurance is included in S&H. ALL shipping is done during business hours after receipt of payment. CONTACT US We answer e-mails between 10 a.m. and 12 noon Monday thru Friday. When you contact us. You must include the item by name or item number and any prior e-mails. If you send us e-mail after 12 noon. We may not be able to reply until the next morning. Please ... morefeel free to call us at 843-259-5917 with any questions. PAYMENT We prefer payment by PAYPAL. But we also accept. Credit Card by phone. Payment must be made within 6 days of auction ending. A reminder notice will be sent 3 days after auction ends and after 6 days a unpaid case will be open. And the item will be relisted. NOTICE WE DO NOT END AUCTIONS EARLY OR DO"BUY IT NOWS" UNLESS NOTED IN AUCTION. WE ALSO DO NOT REVEAL RESERVE PRICES. ANY QUESTION ABOUT AN ITEMS RESERVE PRICE WILL NOT BE ANSWERED. PLEASE BID WITH CONFIDENCE! Customer satisfaction is our highest priority. Unless otherwise stated. You have 14 days from receiving your item to check it out and let us know if there is any problem with it or the shipping. After 14 days. No refunds will be given or returns accepted. NEGATIVE FEEDBACK ON NON-PAYING BIDDERS WILL BE PROMPTLY REPORTED! THANK YOU FOR BIDDING AND GOOD LUCK!
|
|
|
Huck 245 Gun Riveter C-6 Magma Grip Magna Grip Peter Bilt
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Huck 245 Gun Riveter C-6 Magma Grip Magna Grip Peter Bilt Questions? Call Steve(360) 923-1012 Huck 225 Gun. With correct nose pulls Huck C6 and Magnagrip Huckbolts as used in truck trailer repair and industrial assembly work. Manual Included. Pulling for is sufficent to shear 5/16" steel and 3/8" aluminum huckbolts. This gun is strong enough to pull 1/4 bolts that a 352 cannot and is backwards compatible with the 353 model utilizing the same nose pieces Magnagrip noses are also available. But are not available used. Specifications: Weight.9.3 lbs Stroke. 7/16" Air Supply. 20 CFM, Description: The Huck 225/245 is a lightweight. High speed production tool designed to install a wide varity of Huck Blind Fasteners and HUCKBOLT Fasteners. Pull and return action is provided ... moreby a pneumatic-hydraulic intensifier system powered by 90-100 PSI air pressure. I am a Tool Hound and am always finding unique and different tools you never even knew you needed. so. You may be interested in. Please remember 99% of the items I sell are used so they likely may have minor scratches or identification numbers. For common items. Representative photos may be uses. Condition: Seller refurbished Refurbished to good working condition. andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Fixed Shipping Charges. Shipping Carrier Domestic Ups Ground $0.00 I will ship to: United States RELIABLE AIR TOOLS a pretty image. templates with Vendio Sales Manager. Vendio provides powerful selling automation for sellers of all sizes.
|
|
|
A. SELZER (SIOUX) SINGLE CYLINDER PNEUMATIC COMPRESSION RIVETER - #EA 5000
Made in the U.S.A. by A. Selzer& Assoc(Sioux Tools) This is a Single Cylinder Compression Riveter in good condition. Model# EA 5000 Serial# 166 SPECIFICATIONS: Cold Rivet Diameter Capacity: 1/8" steel) 3/32" aluminum) Maximum Force@ 90 psi: 3.000 lbs. Throat Depth: 1-3/8" Jaw Travel: 5/8" Overall Length: 12" Comes exactly as shown in pictures.
|
|
|
Mac Tools Air Hydraulic Riveter AHR273 OR AHR274
Mac Tools Air Hydraulic Riveter AHR273 OR AHR274 Item is used. But in overall good cosmetic condition. There are some paint chips but still in very good shape, see photos. Not sure which model this is. I called Mac Tools' tech support line and the gentleman said there's no way to tell the difference without seeing what size rivets it will hold, and I have no rivets. If you know a way to tell, please share it with me and we can figure out which model this is. Auction is only for what you see in the photos, no other attachments or accessories. Item is untested but guaranteed to work, so bid with confidence! Please ask any questions prior to bidding. Returns are accepted only if item is not fully functional. We are happy to combine shipping on any of our items. Please be sure this is an item you truly want and are prepared to pay for. ... morePayment is required within 4 days or an unpaid item case will be opened. Questions are answered as quickly and thoroughly as possible to help prevent uninformed purchases or buyer's remorse. We are in the office M-F 10-5 and Saturdays 10-3 CST. Questions will only be answered during office hours. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-144cdb0a0f4-0xe3-
|
|
|
HUCK AK-175 PNEUMATIC HYDRAULIC RIVETER AIRCRAFT TOOLS
HUCK AK-175 PNEUMATIC HYDRAULIC RIVETER-THIS RIVETER WORKS AND EXTENDS WHEN THE TRIGGER IS PRESSED-AND RETRACTS WHEN THE HANDLE IS SQUEEZED-HUCK MODEL AK-175 PNEUMATIC HYDRAULIC RIVETER-HAS SOME SANDED MARKS WHERE MILITARY ETCHED NUMBERS WERE REMOVED(cosmetic) COMES EXACTLY AS PICTURED! DOES NOT INCLUDE ANY ACCESSORIES GREAT BUY!
|
|
|
FSI PT-100 CHERRYMAX PNEUMATIC HYDRAULIC RIVETER AIRCRAFT TOOLS
FSI PT-100 CHERRYMAX PNEUMATIC HYDRAULIC RIVETER-THIS RIVETER WORKS AS IT SHOULD AND EXTENDS WHEN THE TRIGGER IS PRESSED-BUT WHEN RELEASE IS ACTUATED IT DOES NOT AUTOMATICALLY RETRACT. YOU HAVE TO DO IT MANUALLY-FSI FASTENING SYSTEMS INTERNATIONAL MODEL PT-100-HAS SOME SMALL SANDED MARKS WHERE A PREVIOUS ENGRAVING WAS REMOVED(cosmetic) COMES EXACTLY AS PICTURED! GREAT BUY!
|
|
|
Grizzly Air Riveter - H6136
Stock photo- not actual pictured item. In good to excellent condition. Work great. No wrenches or interchangeable heads included. Just the gun itself. No international bidders.
|
|
|
CHERRYMAX G704B - LIGHTWEIGHT AIR POWER RIVETER
You are bidding on a CHERRYMAX G704B- LIGHTWEIGHT AIR POWER RIVETER. This air power riveter is slightly used. But is in great condition and is guaranteed to work! The item has no dings, cracks, or owner's marks. The winning bidder will only receive what is shown in the pictures. Please take a look at the pictures provided in this listing. Included Parts List: G704B- Lightweight Air Power Riveter 700A77 Air Bleeder Pulling Heads 269C3 Grip Gage Stem Catcher Bag Original Tool Case Owner Manual Many Extra Rivets(shown in the pictures) Specifications: Air Pressure: 90 PSI(6.2 bar) Min/110 PSI(7.6 bar) Max Stroke: 510 Inch(12.954mm) Pulling Force: 3100 Pounds(13.79kn) 90 PSI(6.2 bar) Cycle Time: Approximately one second Weight: 4-1/4 Pounds(1.93kg) Noise Level: 71 dB(A) Vibration: 2.5m/s2 Air Consumption: 3.9 CFM(110.5 liters/M) at 20 Cycles ... moreper Minute PAYMENT Total payment must be received within 3 days of auction end. Acceptable form of payment is Paypal. Please do not bid if you do not intend to pay. SHIPPING The winner of this auction will pay for shipping. Packages will normally be shipped UPS Ground. Packages delivered to APO/FPO. P.O. Box, Hawaii, Alaska or Puerto Rico addresses will be shipped by USPS. International packages will be USPS Priority Mail International or USPS First Class International Mail for smaller packages. International bidders must contact me for estimated shipping costs before bidding! Depending on the size of the item. Packages will be shipped within 1-2 business days of payment confirmation. RETURN POLICY Return requests must be made within 14 days after the delivered date(requests made after the 14 day period will not be accepted) And items may only be returned if one or all of the following apply: The model of the item received does not match the model of the item purchased; and/or, The item does not power on AND the package is not damaged. If the package appears to be damaged. Please contact me to file a claim. If one or all of the above conditions apply. Items must
|
|
|
RV14GB Riveter w/an Olympic Fastening Systems Pulling Head
For sale is a RV14GB Riveter with an Olympic Fastening Systems Pulling Head. S-39119 engraved on the side of the tool. Tool may have some engravings but does not affect the operation. Previously owned by Aerospace Manufacturers. Tool is used but in good working condition. Sales tax applied to Georgia residents. Free shipping within the U.S. Can ship worldwide. Email with any further questions.
|
|
|
GESIPA GAV 7000 Auto Riveter
This is a GESIPA Gav 7000 Auto Riveting machine. We no longer use this at our shop and are looking to get rid of it for the right price. Their are no known defects with this machine. It was retired from work because it was replaced. This machine is from 2002, but still works great. As far as shipping goes, please let me know if you would like me to use UPS Freight and that will be added onto your final invoice amount upon purchase. This item is not too large or heavy to use UPS Freight, so please specify your shipping upon purchasing the item. Please message me if you want to know more about this great Auto Riveter!
|
|
|
GESIPA GAV 7000 AUTO RIVETER AUTOMATIC RIVETING MACHINE WITH ATTACHMENTS
FOR SALE IS A GESIPA GAV 7000 AUTO RIVETER. THIS AUTOMATIC RIVETING MACHINE COMES WITH 2 ATTACHMENTS. IT IS IN GOOD OVERALL CONDITION AND IS BEING SOLD AS-PICTURED. AS-IS. THIS UNIT WAS TESTED TO POWER ON ONLY. THE LIGHTS, BUTTONS, AND SWITCHES ALL APPEAR TO FUNCTION AS THEY SHOULD. NO FURTHER TESTING WAS COMPLETED. VARIOUS PAPERWORK FOR THE MACHINE WILL BE INCLUDED BUT WAS NOT PICTURED. PLEASE EMAIL OR CALL MICHAEL@ 847-791-1710 WITH QUESTIONS. OFFERS, OR TO TAKE A LOOK. BUYER IS RESPONSIBLE FOR ARRANGING AND PAYING FREIGHT. LET ME KNOW IF YOU NEED HELP LOCATING A CARRIER. WE WILL SECURE THIS MACHINE TO A PALLET FOR FREIGHT.
|
|
|
Pop Hydraulic Riveter RPG 540
Pop Hydraulic Riveter RPG 540 3000lb. This item is used but functional as pictured.
|
|
|
CHERRY G702 *** AIRCRAFT RIVETER *** EXCELLENT WORKING CONDITION **
G702 Lightweight Nut-Plate Power Tool• Air Pressure 90 PSI(6.2 bar) min.110 PSI• 7.6 bar) max. Stroke.75 inch(19.05 mm) Pulling Force 1100 lbs(4.9 kN) 90 PSI(6.2 bar) Cycle Time Approximately one second• Weight 3.5 lbs(1.59 kg) Vibration Less than 2.5 m/s2• Air Consumption.09 SCF/cycle(1.87 L/cycle) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-144e6f39fc6-0x10f-
|
|
|
GENERAL PNEUMATIC COMPRESSION RIVETER - #60000
Made in the U.S.A. by General Pneumatic. This is a Pneumatic Compression Riveter in good condition. Model# 60000 Serial# 6178 SPECIFICATIONS: Jaw Shank Capacity: 3/16" U" Width: 1-1/4" Throat Depth: 1-1/2" Overall Length: 18" Comes exactly as shown in pictures.
|
|
|
FSI D-700C Kit Hydraulic Hand Rivet Gun Riveter Blind Fastener Cherry Aircraft
One used FSI D700C comes with everything in pictures item is used but works great with few minor scratches comes with: Rivet gun D700C 4 adapters 4 metric anvils 9 standard anvils 19 nose pieces 3 tubes of replacement parts 90 degree adapter Offset adapter Extension adapter Posted with
|
|
|
'HIT' HAND RIVETER Mod. HR-007 Made in Japan
HIT' HAND RIVETER Mod. HR-007 Made in Japan Overall length is 10 inches. There are minor wear and tear scratches but they don’t affect the functions of the riveter. It is fully functional. Great item. Bid with confidence! Shipping Info: The cost of shipping is calculated by eBay. I enter a weight and eBay calculates the cost by weight. Package size and the distance it has to travel.
|
|
|
Emhart PRG 510 Pneumatic POP Riveter Rivetool PRG510 Rivet Tool
Up for auction is an Emhart PRG 510 Pneumatic POP Riveter tool. It’s in very good condition and tested working great. Shows normal wear with scratches. Nicks and paint rubs. The business end has a 3/32” hole. The only thing I see to mention is someone put foam tape on it, I guess to protect the tool and where it’s used and laid. The picture is of the actual item being sold. I ship out daily(except Sunday& Holidays) and process items within 24 hrs of payment. California residences will need to pay 8.5% sales tax or provide a valid resale license. Payment must be made within 4 days.
|
|
|
Lot of (16) Huck 225, 352 & 353 Pneumatic Rivet Guns Riveter Riveters - Untested
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2316958.1 A: 0013000000CXCfg O: 0065000000Oz6PP PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Lot of(16) Huck 225. 352& 353 Pneumatic Rivet Guns- Untested This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Huck Type: Pneumatic Riveters Quantity: 16 Makes ... moreObserved: Rivet Gun Models: 225 Puller 352 353 Dimensions& Weight: Shipping Dimensions: L 42" x W 48" x H 15" Shipping Weight: 234 lbs Condition: Unknown/Untested- unable to verify working condition Units may be incomplete or missing parts- see photos for details Overall normal wear from age& previous use in working industrial environment When bidding. Please understand that we are unable to determine the working condition of these items Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition, all conditions are cross-referenced with service personnel, operators, and maintenance system records(when available) bidadoo, Inc. makes no guarantees to actual hours, miles and/or operational condition. Photos and video take pr
|
|
|
Chicago Pneumaic 3X Aero Rivet hammer with extras, Riveter, Aircraft Tools
Chicago Pneumatic 3x rivet hammer. With aluminum goose neck handle. Comes with: 1) Micro-stop(1) Bee hive(1) Small bucking bar(3) 401" rivet sets What you see pictured is what you'll receive 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-144edb4ac6b-0x101-
|
|
|
chicago pheumatics squeeze riveter model cp-214
This item was a maintenance item. It had light usage. If you have any questions please feel free to call me at 616-286-8115 ask for Paul
|
|
|
TC-100 Air Hydraulic Rivet Gun Riveter
Used but tested. I'm not sure what brand this rivet gun. It was TC-100 etched on the gun several times 2300rpm If you have any questions feel free to contact me and I'll get back to you ASAP. Posted with
|
|
|
Cherrymax G85D Pneumatic Lockbolt Power Riveter Aircraft Tool
Used G85D. Burnish marks on housing, includes the nose piece adapter, operated power riveter and functions correctly.
|
|
|
Chicago Pneumatic No. 2 Aero Riveter With 19 different bits
Chicago Pneumatic Aero Riveter Well used but still functions fine Comes with 19 different bits and 2 retention springs also included are 2 Boeing riveters Manuals and a custom made wooden box with slide open top. Three of the bits have been slightly modified to reach in hard to get to spots
|
|
|
NICE CHICAGO PNEUMATIC AIR TOOLS - ALLIGATOR COMPRESSION RIVETER - MOCEL CP-214
HERE WE HAVE NICE CHICAGO PNEUMATIC AIR TOOLS- ALLIGATOR COMPRESSION RIVETER- MOCEL CP-214. IN WORKING ORDER. THE PERVIOUS OWNER WROTE HIS NAME ON IT AS SEEN. PLE ASE SEE THE PICTURE TO SEE THE CONDITION TO THE ITEM. THE ITEM YOU SEE N THE PICTURE IS THE ITEM YOU WILL BE RECEIVING. ONLY WHAT IS PICTURE IS WHAT IS INCLUDED IN THE AUCTION. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACCURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNESDAY AND FRIDAY OF THE WEEK,SO PLEASE ... moreBE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY NO INTERNATIONAL TRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES.
|
|
|
Antique Riveter Base
Categories Other Tractors Electrical Components Vintage Cars Rims& Hub Caps Computers& Accessories Willys Parts Honda Parts Cadillac Parts Toyota Parts Ford Parts Misc Car Parts Chicago Diecast Pulleys Hydraulic Tools& Equipment Briggs& Stratton Parts Tecumseh Parts Carbide Cutting Inserts Milling Tools and Cutters Drill Bits Indexable Tool Holders& Bars End MIlls& Taps Tool Boxes& Cabinets Specialty Pumps& Motors Electronics GM Parts Brock Equipment Parts Antique Riveter Base Riveter. Base only As Is. Where Is, No Returns. Item(s) may be withdrawn if sold locally. Buyer must pay within 48 hours of purchase. Shipping Information: The shipping cost that you see is an estimate provided by E-bay. The actual shipping cost will vary by buyer location and calculated at the end of sale. SEE OUR STORE FOR MORE HIGH ... moreQUALITY PRODUCTS AT VERY REASONABLE RATES! gsrx_vers_526(GS 6.6.6(526)
|
|
|
Pneumatic Air Hydraulic Riveter Rivet Gun with 5 Heads (CherryMax, Olympic, Pop)
Pneumatic Air Hydraulic Riveter Rivet Gun with 5 Heads(CherryMax. Olympic, Pop) LIKE NEW! A must have item for any professional or an enthusiastic mechanic. Ideal for automotive. Aerospace, sheet metal work, duct work, computer equipment and many other applications. A perfect tool when trying to rivet and hold the items you are riveting at the same time. Or just when you dont have access both side. Pulling up to a 1/4" inch rivet and a massive 1300kg of force these air riveters are the real deal. True professional quality. This gun will fit most rivets. ranging from 3/32" all the way to 1/4" in diameter. The traction power is of professional standard at 1300kg. The riveter comes with a cup on the back to catch the"nail" shaped part of the rivet that breaks off. Specifications: Hydraulic piston for increased power ... moreUltra high speed ideal for assembly line, Sets rivets up 6.4mm in diameter Rivet diameter: 2.4. 3.2, 4, 4.8, 6, 6.4mm Up to 1300kg of pull for tough jobs Easy operation in any position with one hand Front exhaust Air inlet 1/4in Air consumption 4cfm Working pressure 90psi, Included: Air riveter gun Jaw case for 3/32" 5/32" and 1/8" Jaw pusher spring 1/4" 7/32" 3/16" 5/32" 1/8" 3/32" heads Spanner gauge Spanner Rivet catcher Air attachment, WARRANTY: Guaranteed to be in working condition upon arrival; otherwise as is. PLEASE SEE PICTURES FOR ALL DETAILS copco palm drill pistol chuck dotco cleco sioux cp chicago pneumatic aircraft airplane industrial tool sheet metal dessoutter cooper tools atlas copco
|
|
|
LOBSTER 025-M PNEUMATIC RIVETER, .812" STROKE, 0.49 ~ 0.59 MPa
Inventory Number: 03141340055 Manufacturer: Description: LOBSTER 025-M PNEUMATIC RIVETER. 812" STROKE, 0.49 ~ 0.59 MPa Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, WORKS WHEN AIR IS APPLIED, 71- 85 PSI, 812" STROKE, USABLE RIVETS: 2.4mm, 3.2mm, 4.0mm, 4.8mm DIAMETERS. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically ... morecharge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in
|
|
|
Cherry G784 Riveter Cherry-LOCK Rivet Installation Tool + Extras! Textron, G784G
Up for sale is a Cherry G784G Cherry-LOCK Rivet Installation Tool/ Riveter. With a whole lot of parts, gaskets and more. The Cherry G784 Hydro-Shift Riveter is a pneumatic-hydraulic tool designed specifically for the most efficient installation of CherryLOCK® Rivets. Its durable. All metal housing makes this tool extremely robust for use in shop environment. It will install nearly all diameters of CherryLOCK® Rivets up to a half-inch grip, A” group only. This powerful tool has been designed with many ergonomic features: lower weight. Less recoil, low noise and a comfortable fit in the operator’s hand. It can be operated in any position with one hand. With proper adapters and pulling heads this tool can be used to install other types of rivets. It comes in a wooden case. With all the extras that you see pictured. There's at least ... moreone complete pulling head, other head parts, internal part, even a replacement trigger, plus a filter and all the gaskets and O-rings you could want. I hooked it up to a compressor and it cycles when the trigger is pulled. I don't have any Cherry-LOCK rivets. So I wasn't able to test it further and do not guarantee that it won't need routine maintenance before being put into service. It's in good used cosmetic condition, with scuffs, scratches, property marks etc. This was originally the property of the US Army(Serial# 1-100! So you can probably ignore the red sticker referencing DOD part#s(unless you're buying this for Army use, I guess) This is the cheapest one on ebay- don't let it get away!
|
|
|
Lobster AR-011 P Air Riveter Gun complete with box
Lobster AR-011 Air Riveter Complete with: 4 different tips. A spare pair of jaws(unused) Brush and wrenches in box. Used in Maintenance Dept. In good condition and works well. 71-85 PSI. Compare to new pricing. Price includes priority shipping and insurance. PayPal preferred. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
HUCK PNEUMATIC RIVET GUN - RIVETER PIN GUN - FASTENER - 22501 - MADE IN JAPAN
HERE WE HAVE HUCK PNEUMATIC RIVET GUN- RIVETER PIN GUN- FASTENER- 22501- MADE IN JAPAN. THE GUN HAS GREASE ON THE END. I WASNT ABLE TO TEST IT OUT SO IT IS SOLD AS IS. PLE ASE SEE THE PICTURE TO SEE THE CONDITION TO THE ITEM. THE ITEM YOU SEE N THE PICTURE IS THE ITEM YOU WILL BE RECEIVING. ONLY WHAT IS PICTURE IS WHAT IS INCLUDED IN THE AUCTION. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACCURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNESDAY AND FRIDAY OF THE ... moreWEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY NO INTERNATIONAL TRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES.
|
|
|
CherryMAX Cherry Max Rivet Gun G704B Textron Riveter G740 Tool
CherryMAX Rivet Gun G704B Cherry MAX rivet gun in near perfect condition. Listing is for the tool only. No pulling heads are included. This is Military surplus. Looks to be unused. Deflector shows signs of the rubber cracking but the rivet tool still had the plastic plug in the air inlet. Connected to air and tool worked fine. I have no heads or rivets so no further testing could be done. Guaranteed to be as described. The CherryMAX® G704B is a pneumatic-hydraulic tool designed specifically for the most efficient installation of CherryMAX® rivets. SPECIFICATIONS: Air Pressure 90 PSI(6.2 bar) min. 110 PSI(7.6 bar) max. Stroke.510 Inch(12.954 mm) Pulling Force 3100 lbs(13.79 kn) 90 PSI(6.2 bar) National Stock Number: 5130-01-393-1584 Military Part Number: M85188T2 Product Brochure@ http:www.cherryaerospace.com/files/pdf/catalog/CA-1001.pdf ... moreBecause of eBay. PayPal and internet fraud, I will need a telephone number that does contact the winning bidder. I will ship to a confirmed address only unless prior arrangements have been made. Shipping will be FREE in the lower 48. Feel free to e-mail with any questions you may have about this item. I will ship on PayPal receipt. Payment due within five days of completion of auction. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14505d16e0f-0x10d-
|
|
|
FSI PT-100 CHERRYMAX AIR HYDRAULIC RIVETER AIRCRAFT TOOLS
FSI PT-100 CHERRYMAX AIR HYDRAULIC RIVETER-THIS RIVETER WORKS AS IT SHOULD AND EXTENDS WHEN THE TRIGGER IS PRESSED-BUT WHEN RELEASE IS ACTUATED IT DOES NOT AUTOMATICALLY RETRACT. YOU HAVE TO DO IT MANUALLY-FSI FASTENING SYSTEMS INTERNATIONAL MODEL PT-100-HAS SOME SMALL SANDED MARKS WHERE A PREVIOUS ENGRAVING WAS REMOVED-COMES EXACTLY AS PICTURED! GREAT BUY!
|
|
|
G689 HYDRO-SHIFT CHERRY LOCK *** AIRCRAFT *** RIVETER
DESCRIPTION The G689 hydro-shift riveter is a heavy duty. Pneumatic- hydraulic tool designed specifically for the installation of all CherryLOCK ® rivets; however. It is recommended primarily for 1/4" diameters. It can be used to install all diameters and lengths as indicated on the tool capacity charts. Its durable. All metal housing makes this tool very robust for use in a shop environment. This extremely powerful tool has been designed with many ergonomic features: low recoil. Low noise and a comfortable fit in the operator’s hand. It can be operated in any position with one hand. The H681 Series pulling heads fit directly on this tool to install both bulbed and standard NAS Type 2000 Series CherryLOCK ® rivets. With the proper adapters and pulling heads. This tool can install other types of rivets.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14505d17b1e-0x10a-
|
|
|
Chicago Pneumatic "C" Rivet Squeezer Compression Riveter CP Heavy Duty Complete
Chicago Pneumatic"C" Rivet Squeezer Compression Riveter. CP Heavy Duty Complete with foot pedal and regulators as shown all in good working condition This item was Surplus to a local GE Factory Ready to use if you live local and pick the item up i also have the heavy dury metal cart that it came with i will throw in for free just heavy to ship FREE PRIORITY SHIPPING Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive. I go to the post office at everyday at 1.00pm Monday- Friday. If an item is bought and payed for before then item will be send it the same day. If any later it will be the next day Most items sent priority mail unless otherwise stated 14 Day No Hassle Returns Policy. Please visit and subscribe to my eBay Store and ... moreFacebook Page for more great items and friendly. Reliable customer service. And Great deals. Thank You For Viewing
|
|
|
STIMPSON 490-1 BLIND FASTNER RIVETER PAT 1997 438 R.L. DRAKE 01703 MUST SEE!!
UP FOR SALE IS A USED STIMPSON BLIND RIVETER USED AT THE R.L. DRAKE FACTORY IN FRANKLIN. OHIO THE ITEM IS IN USED BUT GOOD WORKING CONDITION AS IT DID WORK PRIOR TO REMOVAL FROM THE DRAKE FACTORY. THE GAUGES ARE BROKE SO THEY WILL HAVE TO BE REPLACED. THE ITEM WAS USED DAILY AT THE R.L. DRAKE FACTORY BEFORE IT CLOSED IT'S DOORS WE DO HAVE A PICTURE OF WHAT THE RIVETS THIS MACHINE MAKES LOOK LIKE ABOVE WILL SHIP FREE TO THE U.S.A. THE RIVETER HAS THE FOLLOWING MARKED ON IT: STIMPSON 490-1 STIMPSON PAT 1997438 A-1751(MARKED ON THE FOOT) R.L. DRAKE COMPANY CONTROL NUMBER 01703 IT HAS THE FOLLOWING DIMENSIONS: APRX 16-3/4" TALL APRX 6" WIDE AT THE BASE& APRX 6-3/4" WIDE AT THE TOP THE BASE IS APRX IS APRX 6" IN LENGTH AND APRX 5" WIDE AT THE SMALLEST POINT& APRX 5-5/16" WIDE AT THE LARGEST POINT ALL OFFERS ... moreWILL BE SERIOUSLY CONSIDERED! SEE MY PICTURES FOR MORE DETAIL& FEEL FREE TO EMAIL ME WITH ANY QUESTIONS! THANKS FOR LOOKING!
|
|
|
CHICAGO PNEUMATIC CP 251 RIVET SQUEEZER AEROSPACE COMPRESSION RIVETER TOOL USED
CHICAGO PNEUMATIC CP 251 RIVET SQUEEZER AEROSPACE COMPRESSION RIVETER TOOL USED CHICAGO PNEUMATIC CP-251 C COMPRESSION RIVETER RIVET SQUEEZER TOOL USED THIS AUCTION IS FOR A USED CHICAGO PNEUMATIC AEROSPACE SQUEEZE RIVETING TOOL. THE TOOL IS USED AND HAS SOME WEAR BUT IN PERFECT WORKING CONDITION. PERFECT FOR AEROSPACE APPLICATION OR ANY SHEET METAL APPLICATION OR JOB YOU WANT TO THROW AT IT. THE TOOL DOES NOT INCLUDE.187 RIVET SETS THE AUCTION IS FOR THE SQUEEZE RIVET TOOL ONLY. Model: CP-251-C USED, Manufactured by: Chicago Pneumatic, Specifications CP- 251- C Part Code: CP 251, Weight lbs. 8 1/2 lbs. RIVET SET SIZE Length Inches 30" Capacity ALUM. in/mm 5/32" STEEL in/mm 1/8" Duralumin 1/8" Reach 2 1/8" Gap 7/8" Description:Used Chicago Pneumatic CP- 251- C Compression Riveter"Rivet Squeezer" Great ... moreused unit great savings over a new unit. Features: one man operation increases productivity. squeeze action permits easy control. Exceptional accuracy and uniformity. high joint integrity independent of operator skill level. quiet operation. force applied to rivet is adjustable by operator plunger speed can be controlled by throttle. See our store for more island themed products and more at http:stores.shop.ebay.com/savingsinthesun Pay Pal only accepted for payment. Shipping is free in the United States item ships within 24 hours of confirmation of payment from Paypal. If any questions or concerns you can contact us thru E b a y.
|
|
|
ATI INDUSTRIES - RIVETER RIVET CUTTER - SOLID METAL LARGE HANDLES
HERE WE HAVE ATI INDUSTRIES- RIVETER RIVET CUTTER- SOLID METAL LARGE HANDLES. PLE ASE SEE THE PICTURE TO SEE THE CONDITION TO THE ITEM. THE ITEM YOU SEE N THE PICTURE IS THE ITEM YOU WILL BE RECEIVING. ONLY WHAT IS PICTURE IS WHAT IS INCLUDED IN THE AUCTION. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACCURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNESDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY NO INTERNATIONAL ... moreTRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-1450a3753e8-0x105-
|
|
|
Huck Model 350 Rivet Gun Aircraft Riveter
Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Used Huck Model 350 Rivet Gun Aircraft Riveter Winner to pay 15.00 shipping sr row 4 shelf 2c Florida residents to pay Florida Sales Tax. Please let us know if you are a Florida resident when you request a total. We now take Paypal for payment. We ONLY ship to Paypal confirmned addresses. WE SHIP FEDEX ONLY. NO PO BOXES OR INTERNATIONAL SHIPMENTS. Only FEDEX.NO International bidders. The shipping cost(if listed in the auction) is for Continental US bidders only(not Hawaii or Alaska) We ship 3 times a week with FEDEX. On Monday Wednesday and Fridays. If payment has been received by 10am any of those days the items ships in that days run. Winning bidders please include item number and description. ... moreWe often sell many lots of the same type of material and this helps to speed the shipping of your auction items. Also please include the correct ship to address with payment and whether you want the item insured or not. Thank you for bidding and please email with any questions prior to bidding. Please note: NO INTERNATIONAL SHIPMENTS. Purchaser is responsible for complying with all necessary U.S. Government rules. Licensing and regulations governing export of any material purchased from us. If we find out you are an International bidder we reserve the right to cancel your bids. We require signature on all shipments in excess of 250 dollars. Thank you. Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 FedEx Ground® FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
|
|
|
FSI PT-4000 Cordless Electric 12V Rivet Gun Riveter Fastener Tool CherryMAX Huck
YOU ARE BUYING FROM A SELLER WHO HAS*ALWAYS* HAD 100% POSITIVE eBAY FEEDBACK SINCE 1999. NOT JUST IN THE PAST 12 MONTHS. BID OR BUY WITH CONFIDENCE! ITEM DESCRIPTION: This is a used PT-4000 Cordless 12 Volt Blind Riveter in excellent near-new condition. Manufactured in the USA by Fastening Systems International(FSI) This powerful rechargeable electric tool is heavily used by the military. Aviation, and automotive industries for vehicle repair, and can be used in a wide variety of applications. This great tool is arguably the best such electric hand power tool in the world. It is essentially the same tool as the Gesipa PowerBird tool manufactured in Germany, and is manufactured under license by Fastening Systems International(FSI) However, the PT-4000 incorporates many more nosepiece/adapter options than the PowerBird, making it much more ... moreversatile. The PT-4000 generates an amazing 3.000 lbs of pulling force. With the appropriate nosepiece, It will install virtually all CherryMax ®(M7885) Cherry Interlock®, Huck MagnaLok®, Pop type rivets, and other fastener types with the included nosepieces. It will also install Avdel®, or Cherry Monobolts ®, 5/32” and 3/16” Blind Bolts(MS90353/54-S/U) and other fastener types with other nosepieces and jaw sets(NOT INCLUDED) This tool is also compatible with the adapters necessary to accept straight, offset and 90 degree CherryMAX pulling heads(ADAPTERS& PULLING HEADS NOT INCLUDED) This listing includes the PT-4000 tool. 12 Volt charger, 2 NiMH batteries, four(4) nosepieces, nosepiece wrench which fits into a slot on the side of the tool, plastic storage case, and detailed operating instruction manual. The manual shows you how to use all the many nosepieces, pulling heads, and adapters available for this tool(NOT INCLUDED) for many fastener applications. Note that the included storage case is NOT the FSI factory steel storage case that normally comes with this tool. I have substituted a sturdy foam-lined plastic case that fits everything nicely. The
|
|
|
AVDEL 7498 Rivit Blind POWER RIVETER 1/4" MONOBOLT Air Pneumatic Fastener Gun
Specifications- Model 07498 Width205mm 8.07" Height 321 mm 12.65" Description: AVDEL The pneumatic 07498 type tool is designed to place 1/4" MONOBOLT Avdel fasteners.
|
|
|
RV882-5 (5/32") Pulling Head, Riveter
Olympic Fastening Systems. 5/32" Right Angle Pulling Head. Used, in good working condition. DO NOT SHIP INTERNATIONALLY.
|
|
|
PNEUMATIC POP RIVETER PRG 510 U.SM. COPR. AIRCRAFT AEROSPACE POP RIVET GUN
PNEUMATIC POP RIVETER PRG 510 U.SM. COPR. AIRCRAFT AEROSPACE POP RIVET GUN THE MANUAL CAN BE SEEN AND PRINTED ON-LINE JUST GOOGLE pgr510 pneumatic pop riveter THIS TOOL HAS BEEN CHECK WITH AIR. THE TOOL CYCLES WHEN THE TRIGGER IS ACTIVATED, BUT HAVE NO RIVETS TO FULLY TEST THE RUBBER BOOT IS TORN. AS CAN BE SEEN IN THE PICTURES PRG-510-52A IS THE RIVET HEAD THAT IS IN THE TOOL
|
|
|
Aircraft Aviation G29 Cherry Blind Hand Riveter
Works great. Best hand riveter out there. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1452162b228-0x10b-
|
|
 |