|
Aero-Motive 10-F Balancer ~ 4-10 lbs ~ Lightly Used ~ Great Working Condition
Aero-Motive 10-F Balancer ~ 4-10 lbs ~ Lightly Used ~ Great Working Condition.
|
|
|
tapco pro cutoff tool great condition hardley used
this is like new tool used a few times then put away for a while trying to get rid of tools i dont use anymore
|
|
|
ANTIQUE GREENERD NO. 1 ARBOR BENCH PRESS* Awesome!
VINTAGE/ ANTIQUE VERY GOOD CONDITION NO 1 GREENERD ARBOR PRESS ALL ORIGINAL AND STILL GREAT WORKING ORDER Ships to USA only. PayPal only. Payment due within 3 days of winning. Please contact with any questions or for additional photos.
|
|
|
Simplex 24 ton 2 1/2" x 8" screw jack
Simplex 24 ton screw jack Model SJ258; 2 1/2" diameter screw x 8" lift; closed height 13" Used. Very good condition Buyer pays shipping Accept Paypal or MO
|
|
|
HUSKIE ROBO CRIMP REC-3410 + Battery and Charger. No Reserve! $1.00
This Huskie REC-3410(14.4V) Crimper is used and shows normal wear but has been tested and is in perfect working order. Includes one battery and battery charger. No Reserve set on this auction and bidding starts at just $1.00. Good luck and happy bidding!
|
|
|
THREE "V" BELT CAST IRON PULLEYS
Three"V" Cast Iron Belt Pulleys. Large one is 12-1/4" diameter and 3/4" wide. With a center hole of 3/4" Next one is 11-1/4" diameter. 3/4" wide and center hole of 1" Has some minor pitting. Small one is 8-1' diameter. 3/4" wide with center hole of 3/4. All need a good cleaning. There is minor rust with no breaks or repairs. WINNING BIDDER TO REPLY IN THREE DAYS AND PAYMENT TO BE RECEIVED IN FIVE DAYS OR ITEM WILL BE RELISTED!
|
|
|
NICE CLEVELAND-KIDDER TENSION INDICATOR MODEL TIX-1
SquareTrade © AP6.0 Description You are bidding on a NICE CLEVELAND-KIDDER TENSION INDICATOR. MODEL TIX-1. Retail cost of more than $450.00 This is a very nice indicator in excellent condition and it is fully guaranteed. Very competitive Shipping rates for our always welcomed International bidders Shipping and handling is $9.90 within the Continental USA.
|
|
|
Cleco Clecomatic Torque Limiting Clutch Mechanism w/ 1/4" Hex Chuck
Cleco Clecomatic clutch mechanism. Used but in good working order. 1/4" hex bit quick release chuck. Input drive is a spline shaft. A spline to 0.18" hex drive adapter is included.
|
|
|
Dillon Dynamometer, 10" dial, 1000 lbs by 5 lbs, with case and shackles
Dillon Dynamometer. 10" dial, 1,000 pounds with 5 pound increments. This was used very rarely in a lab setting. And looks good. I'm guessing it might need to be calibrated since it hasn't been used for a while. Includes the metal case. This item will ship by standard parcel shipping within three business days of payment. If you have any questions. Please contact me. I want you to be sure you are ordering the correct item(as described and depicted in the photos) since I do not accept returns. Thank you!
|
|
|
Red Commercial Engine Stand
code delete all code including and in between'Billboard start' and'Billboard end' IE] Billboard End- Howdy Folks! Shorty here! This Engine stand has a max weight limit of 2200 lbs. This is a used item. But is in good working condition.
|
|
|
Motorola CM6 HC Series Digital Microwave Radio System + manuals+ training guide
i000000. Motorola CM6 HC Series Digital Microwave Radio System + manuals+ training guide Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Digital Microwave Radio System 2x Motorola CM6 HC Series 1 Rack + training manuals. Installation books, system user manual These units look almost new. They were pulled working. Top Box: TX= 6645mhz and RX= 6805mhz Bottom: TX= 6745mhz and RX= 6585mhz Units were made in 1998 and are complete and were pulled right out of service. The racks are 7'6" tall/ 20.5" wide/ 18" thick. The manuals& documents included: Complete new 500 page CM6 Digital Microwave Radio/ Network ... moreSystem user's manual*Complete 121 page CM6 Digital Radio's Training Manual- Used for a class to train on the alignment of all moduals. Installation procedures, how to install, maintain, troubleshooting. Telect DSX Lifetime Guarantee + Installation& operation packet. CM6 Information& Technical Specs Manual*Telect User Maunual& Large Blueprint Layout*55 page Larus Addedum A1 Route Switch Manual*60 page Larus Addedum A3 Route Switch Diversity Switch Manual Top CM6 Box#1 Top Inner Rack Cards: Controller= MGN1029A REN A04-0 PSU Intronics S2045B 9623 7715 NB SCU MLN7876B AA04-0 ACU MLN7195B RA07-0 MOD MLN7339A RA13-0 ATDE MLN7404A RA03-3 DEMOD MLN7340A RA06-0 MUX MLN7341A RA12-0 SYNDES MLN7899A MSABMQ OUTA MLN7201A RA09-0 Bottom Inner Rack Cards: TXU MTH1429A RB05-0 RXU MRH1092A RA04-0 RF PSU Intronics 53070 9633 1398 Bottom CM6 Box#2 Top Inner RaCK Cards: Controller= MGN1029A REN A04-0 PSU Intronics S2045B 9623 7715 NB SCU MLN7876B AA04-0 ACU MLN7195B RA07-0 MOD MLN7339A RA13-0 ATDE MLN7404A RA03-3 DEMOD MLN7340A RA06-0 MUX MLN7341A RA12-0 SYNDES MLN7899A MSABMQ Bottom Inner Rack Cards: TX4 MTM1428A RB04-0 RXU MRM1092A RA04-0 RF PSU INTRONICS S3070 9633 1396 We
|
|
|
Kingston EtheRx Pro-Series 10/100Base-TX KND1610TX 16 Port Switch
Tested to power on only. Since no further testing was done. It has been placed under the for parts/not working category. It has some scratches on the top but it's in overall good condition. Power cord not included. Sold as is. RETURN POLICY: All sales are final except as outlined below. We will not consider returns for our items unless one of the following conditions is met: The item is not as described in the listing. The item is“dead on arrival” DOA) You notified us within 14 business days, and the item type is covered under our 14-day DOA warranty[1] Note that this does not cover damage incurred during shipping or installation or use; it means that your item works to the extent we described it. 1] The following items carry a 14-day"dead on arrival" DOA) warranty: items that are described as“new” or“used” under the Ebay item ... morecondition. The following items are sold AS-IS. Without any kind of warranty: items that are described as“for parts or repair” under the Ebay item condition and also described like that under the listing description. If applicable. Refunds will be given only after the item is returned, packed up along with all ORIGINAL packing material and documentation sent by us. We do not refund shipping costs unless one of the aforementioned conditions is met. We will not accept returns on items that have been modified in any way. All returns are subject to verification and testing. BIDDING AND PAYMENT: We only accept PayPal for payment We charge a 20% RE-STOCKING FEE on any item returned. Payment is due within 5 business days of the date your auction ends or. If applicable, your invoice date. If you need to make special arrangements, please let us know before we issue you an invoice, otherwise, Ebay automatically opens a case on our behalf after 7 days. As we are closed on weekends. If you pay for your item on Friday, we will not start the shipping process until Monday. If you have a valid Texas resale certificate. We would be happy to refund your sales tax after the invoice is pai
|
|
|
ARMSTRONG STEELGRIP LARGE GEAR PULLER #1004
ARMSTRONG STEELGRIP LARGE GEAR PULLER#1004 WEIGHT: 42 LBS(ADK184 1.7 Floor L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional charge to the shipping. ... moreWE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(856) 881-3185 Monday thru Frid
|
|
|
DILLON Dynamometer Model: Communicator
Welcome to bidding on USED DILLON Dynamometer Model: Communicator Condition: used-working pulled Sold as is. Actual item shown in the picture Manufacturer: Dillon A division of Weight-Tronix 1000 Armstrong Dr. Included: what is shown in picture only Pay ment Policy Please use Paypal for payment. This is the most convenient payment option for eBay transaction. We charge sales tax in CA. State taxes will be calculated at checkout Domestic Shipping Policy All orders will be shipped via United States Postal Service. Bulk item may be shipped by UPS ground. International Shipping Policy We ship to international addresses. Buyers are responsible for any international customs and duties that may apply. International shipping time varies greatly; therefore. We can not provide you with any estimated delivery time. Your order will be send to our forwarder ... morefor transfer through their worldwide logistic network. If you need faster shipping, please select USPS Express Mail(EMS) during payment. Please make sure you understand the import regulation of your country. Any payment for VAT, GST and duty is your responsibly. We cannot make false declaration or mark shipment as gift. Returns and Exchange Policy Buyer pays return shipping You have 14 days to request an RMA Number after the item has been delivered. Any item that arrives at our location without a RMA Number clearly marked on the package or is damaged will not be accepted. Feedback If you are satisfied when get item. A positive feedback leave for us will be quite appreciated, and we will do the same for you, and any problem about the item please contact us before leave negative feedback. We can solve by communication, thanks. This auction only comes with what is listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. In case of received item is not working or not matching with your preference please send me a message. We will find the way to solve the problem or refun
|
|
|
OLYMPUS IF11S2-30 INDUSTRIAL BORESCOPE FIBEROSCOPE BEST FOR PIPE OBSERVATIONS
SquareTrade © AP6.0 OLYMPUS IF11S2-30. MADE IN JAPAN. USED BUT WORKS FINE. THIS IS VERY LONG AND RARE INDUSTRIAL BORESCOPE WITH VARIOUS APPLICATIONS. EYEPIECE VIEW CAN BE FOCUSSED AND THE TAIL END IS ROTATABLE. THE FIBER LIGHT UNIT IS NOT SHOWN IN PHOTO BUT INCLUDED. 11MM FIBEROSCOPE TUBE. USED CONDITION AND SOLD AS IS. COSTS MORE THAN $20.000 NEW. SAVE THOUSANDS. CONTACT FOR MORE DETAILS. SHIPPING AND GENERAL INFORMAITON Shipping charges includes packaging costs and handling fees. Insurance is charged separately based on the amount. Email for international shipping charges. Pay us securely with any major credit card through PayPal up to $500. Payments exceeding $500 should be sent by direct bank wire transfer or bank certified check. Buyer should send the payment within 7 days after winning the item. Orders will normally be shipped ... morewithin 4-10 days based on nature of item. Mode of payment, bank clearance, special packaging requirement etc. Freight items require more handling time for proper packaging and paper work. We can’t hold responsible for lost or damaged packages. It is buyer’s responsibility to initiate the claim from lost, misplaced or damaged packages. Customs and other local taxes if any are buyer’s responsibility. California residents. Add 9.50% sales tax. All currency amount referred to in our listings are in United States Dollars. All items are pre-owned and unless described carries no warranty or guarantee expressed or implied and no technical support. Sale is“as is” and with no exchanges. No returns or no refunds. All sales are final. As we sell items“as is” The items may be dusty or may have some stickers or some kind of ID mark of previous owner. Free freight shipping if offered in the description is dock to dock only and does not include special services such as crating, skidding, residential delivery, lift gate, inside delivery, smaller truck requirement, full insurance. We only include and ship item/accessories as listed. Don’t expect items/accessories which are not described or listed.
|
|
|
GRAY METAL CARRYING CASE 27 1/2" L x 7 1/2" W x 5" D With 2 Lockable Latches
Item Description: Used carrying case in good condition with wear from use and storage. see pictures) TERMS AND CONDITIONS All items for sale are purchased from auctions in new or used condition and described as best as possible in the listings. All items are tested if I have the means and/or technical knowledge to do so. And I try to provide as much information in the descriptions, titles, and pictures as possible. please use the"zoom" feature to help read technical info and help determine condition) If you have a problem with an item you purchased. Please contact me to work out a solution before leaving negative feedback. I will do whatever I reasonably can to make the customer happy, Please understand there are items that I have little or no knowledge about but will try to answer any questions I can. The manufacturers website ... moreis usually the best place to obtain information about products they made. Mid Thumb Surplus is not affiliated with any of the manufacturer's of the products for sale and will not be held liable for damage or injury to persons or property resulting from merchandise purchased from us. Alot of the items for sale can be dangerous if not installed. Operated, or handled by qualified persons. SHIPPING Shipping terms are stated in each listing. Free shipping items will be sent by whatever carrier and service chosen by me. I will always try to ship priority mail even on free shipping items unless the costs are just too high to do so. International rates are firm and we will not mark the item as a gift. Additional charges may apply according to the destination countries customs policies. Buyer is responsible to be aware of and pay for any additional shipping charges that arise. Items will be shipped by the carrier of our choosing, and by the service chosen unless buyer contacts us prior to discuss alternative shipping options. THANK YOU!
|
|
|
ARO ELECTRIC TORQUE CONTROLLER 47300-1 W/ ELECTRIC TORQUE PRECISION SCREWDRIVER
ARO ELECTRIC TORQUE CONTROLLER MODEL 47300-1 W/ ELECTRIC TORQUE PRECISION SCREWDRIVER SKU:ELECT1315KA069-2578-FS-READ Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
AERO MOTIVE BALANCER 15F 15-F AEROMOTIVE
I HAVE FOR AUCTION AN EXCELLENT CONDITION AERO MOTIVE BALANCER MODEL 15-F- PLEASE BE SURE TO VISIT MY EBAY STORE FOR MANY UNIQUE ITEMS- All items are returnable minus any shipping charges after receipt of item unless item is SOLD AS IS WHERE IS. If item arrives damaged in any way we will be glad to file a claim with the shipper. INVENTORY LOCATION# WE STRIVE FOR 100% 5 STAR SATISFACTION- IF FOR ANY REASON YOU ARE NOT 100% SATISFIED PLEASE EMAIL SO THAT WE MAY WORK TO MAKE YOU A COMPLETELY SATISFIED CUSTOMER- ON RETURNS THERE WILL BE A 15% RESTOCKING FEE ON ITEMS RETURNED FOR REASONS THAT ARE NOT OF FAULT OF THE SELLER- I CAN OFFER DISCOUNTED SHIPPING ON MULTIPLE ITEMS SHIPPED TOGETHER- IF AN AUCTION ITEM DOES NOT HAVE A BID AND YOU ARE INTERESTED IN PURCHASE JUST EMAIL AND I CAN ALWAYS ADD A BUY IT NOW-Please email for shipping rates to Alaska. ... moreHawaii and for international shipping rates. All items are shipped via UPS ground or USPS unless stated otherwise. Ground normally takes 3-7 business days. Please allow 1-3 days from payment date for you order to be processed and shipped. We do not ship on Friday, Saturday or Sunday. Please Keep in mind that UPS does not service on Saturday or Sunday so factor that into the delivery time of your item. We do offer local pick-up on most items. A bid is a legally binding contract, please do not bid if you are not 100% certain you can follow through with payment at the winning bid price. All bids and sales are final, so please verify your bid amount before placing it. Return/refund authorization is required for all items. Refunds/returns are only provided if a product is not listed as described. We leave positive feedback once per month so don't worry feedback will be updated. Please contact us before posting negative feedback, we would like the chance to correct any problems. Our customers are our business. We focus our business towards the satisfaction of our customers and aim to provide the highest level of service and excellence. Items that are sold(Teste
|
|
|
Aeromotive Tool Balancer Model 70JA 55-70lbs USED
Aeromotive Tool Balancer pic: 22024-30 loc: 78 Model 70JA Range: 55-70lbs SN: HY1144 USED. In good condition(see the pics to decide for yourself) Buyer pays actual shipping on 41lbs Payment: Paypal If you are the buyer of this item. Payment is expected within a five day period after purchase. If you are not able to send payment within this time frame, please contact me to make other arrangements, I am flexible. Warranty: All items are warrantied against D.O.A. it will work when it arrives) No warranty beyond that. I have made an honest and fair evaluation of this item. But I am only human. I do miss things occasionally, and if it is not as I have represented it, I certainly will do what I can to"make it right" Returns: I accept returns only for items under warranty- no returns for purchasing the incorrect item. Customer order changes, ... moreetc. Questions? 616-292-5579
|
|
|
VERY NICE Skil Model Number 7275 Orbital Sander
Up for auction is a Skil Palm Grip(Orbital) Sander Model No. 7275. It is in very good condition; hardly used. Owner's Operating Guide included. FREE SHIPPING! FedEx Ground.
|
|
|
George Stevens 39AM Precision Xfmr Magnet Copper Coil Winding Winder Wire Core
George Stevens 39 AML- S/N 26779 All types of random wound Bobbin Coils; solenoids; repeater coils as well as small precision instrument type miniaturized windings. Max coil 0D = 1-1/2" 38.1mm) Max Coil Length 3/4" 19.05mm) Wire size Wound 28-50 Winding Range 8 to 500 turns-per-layer Max. Loading Distance for Multiple Winding 5-1/2" 139.7 mm) Winding Speeds- up to 7000 RPM Acceleration Control Motor equip- 1/12 HP. 7500 RPM, W/Built in Speed control 115 volt Emergency Stop Instant Re- setting Odometer Positive stopping Magnetic Brake Brake Release Feature Output End of Spindle 3/8" 9.525 mm) flatted shaft. accommodates chucks or mandrel adapters. Standard Spindle Direction EXTREMLY COMPACT WINDING HEAD DESIGN ONLY 5" 127mm) W x 3-1/2" 88.9 mm) H x 1-1/2" 38.1 mm) THICK PROVIDES COMPLETE OPERATOR ACCESSIBILITY ... moreFOR PRECISION COIL WORK. TAILSTOCK FOR MULTIPLE WINDING OR FOR WINDING SOLID CORE BOBBINS.
|
|
|
Sioux & K-Line Valve Grinders
Two Valve Grinders 1-Sioux. 1-K-Line including 2 boxes filled with additonal tooling. Local Pick Up Only BUT willing to assist buyer with shipping. Seller reserves the right to end auction early as items are for sale locally.
|
|
|
Gammon Technical Aviation Fuel Aqua-Glo Series III - Water Detector Kit
Model GTP-322 Aqua Glo Series III Water Detector Measures Water Content of Fuel Shipping to 48 States `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13e2ae74d25-0xf7-
|
|
|
Caterpillar 5P0301 Shield Driver 3208 3306 Sleeve Meter Fuel Injection Pump Tool
Caterpillar 5P0301 Shield Driver 3208 3306 Sleeve Meter Fuel Injection Pump Tool Thank you for looking. Please check out my eBay Store: Starfish Unlimited for some great deals. Used Good Condition Genuine Caterpillar Not Aftermarket 5P0301 Weight Shield Driver For 3208. 1160, 3160, 3304, 3306 with Sleeve Metering Fuel System Made of a composite material(What appears to be rust in the picture is simply the color of the composite material. It is not rust) This driver is used to install the fuel injection pump governor weight shield on the camshaft This tool helps prevent damage to the weight shield when installing it which can cause governor failure. Check with your CAT dealer to be sure that this tool will work for your application. Tool is in good condition with slight nicks and scratches from normal everyday use.This does not affect the ... moreoperation or accuracy of the driver This auction/buy it now is ONLY for the item pictured. I ship to the USA and Puerto Rico Only(No International Shipping) Combined Shipping Available We only accept PayPal. Payment must be made within 3 days of winning an auction/ Buy It Now. If for some reason you have a problem with payment you MUST contact me within three days of winning an auction/ Buy It Now so we can work something out. If Payment Is NOT received or arrangements made within one week of close of auction/ Buy It Now I will open a case on ebay for non payment and/ or relist the item. I ship to the United States Of America ONLY. I ship to all 50 states and Puerto Rico. No International Shipping) All items are shipped using The United States Postal Service. We ship your item or items within ONE business day of receiving CLEARED payment. Seller will ship item to buyer after payment has cleared in PayPal. Returns are accepted EXCEPT on Seasonal Items. Seasonal Items will state on listing No Returns. For other returns buyer must contact the seller within 14 days of delivery of item. After contacting seller. The buyer must return item with delivery confirmation within seven
|
|
|
New Snap On 25 Pc. Multi-Spline Extractor Set
25 pcs multi size extractors set work wonder when bolt's head ir ruined or broken all you have to do just find the size drill a hole in the center and tap the extractor in the hole and use a wrench or socket to counter turn and the bolt will reverse out.
|
|
|
Caterpillar Forged Body Injection Pump Tool Plunger&Barrel Splined Socket Wrench
Caterpillar Forged Body Injection Pump Tool Plunger&Barrel Splined Socket Wrench Thank you for looking. Please check out my eBay Store: Starfish Unlimited for some great deals. Used Good Condition Genuine Caterpillar Not Aftermarket Forged Body Fuel Injection Pump Splined Socket Wrench This wrench is for use on Plungers& Barrels with splined retaining nuts. The splines are approximately 1 1/16" OD This splined socket is used to loosen or tighten the barrel retaining nut when cleaning or repairing the individual pumps. This socket wrench helps prevent damaging the splines and warping the retaining nut Not for Use on Compact. Sleeve Metering or New Scroll Fuel Systems Check with Cat Dealer to be sure this will work for your application. Is in good condition may have slight nicks. Light surface rust and/or scratches from normal ... moreuse. Scratches on each side are from removing my company information This does not affect the operation or accuracy This auction/buy it now is ONLY for the item pictured. If you have any questions please contact me before bidding. I ship to the USA and Puerto Rico Only(No International Shipping) Combined Shipping Available We only accept PayPal. Payment must be made within 3 days of winning an auction/ Buy It Now. If for some reason you have a problem with payment you MUST contact me within three days of winning an auction/ Buy It Now so we can work something out. If Payment Is NOT received or arrangements made within one week of close of auction/ Buy It Now I will open a case on ebay for non payment and/ or relist the item. I ship to the United States Of America ONLY. I ship to all 50 states and Puerto Rico. No International Shipping) All items are shipped using The United States Postal Service. We ship your item or items within ONE business day of receiving CLEARED payment. Seller will ship item to buyer after payment has cleared in PayPal. Returns are accepted EXCEPT on Seasonal Items. Seasonal Items will state on listing No Returns. For other returns buyer must contact the se
|
|
|
Caterpillar Overfueling Spring Compressor Fuel Injection Rack Tool 3306 3406B
Caterpillar Overfueling Spring Compressor Fuel Injection Rack Tool 3306 3406B Thank you for looking. Please check out my eBay Store: Starfish Unlimited for some great deals. Used Good Condition Genuine Caterpillar Not Aftermarket Overfueling Spring Compressor Used to compress the overfueling spring in order to set the Rack. Air Fuel Ratio& Shut Off Levers on New Scroll 3204 3304 3306& 3406B New Scroll Fuel Injection Pumps and Governors Not for use on Compact or Sleeve Metering Fuel Injection Pumps Check with Cat Dealer to be sure this will work for your application. Is in good condition may have slight nicks. And/or scratches from normal use. This does not affect the operation or accuracy This auction/buy it now is ONLY for the item pictured. If you have any questions please contact me before bidding. I ship to the USA and Puerto ... moreRico Only(No International Shipping) Combined Shipping Available We only accept PayPal. Payment must be made within 3 days of winning an auction/ Buy It Now. If for some reason you have a problem with payment you MUST contact me within three days of winning an auction/ Buy It Now so we can work something out. If Payment Is NOT received or arrangements made within one week of close of auction/ Buy It Now I will open a case on ebay for non payment and/ or relist the item. I ship to the United States Of America ONLY. I ship to all 50 states and Puerto Rico. No International Shipping) All items are shipped using The United States Postal Service. We ship your item or items within ONE business day of receiving CLEARED payment. Seller will ship item to buyer after payment has cleared in PayPal. Returns are accepted EXCEPT on Seasonal Items. Seasonal Items will state on listing No Returns. For other returns buyer must contact the seller within 14 days of delivery of item. After contacting seller. The buyer must return item with delivery confirmation within seven days. Item must be in original packaging/ well packed and in good condition.The buyer will pay for return shipping. After rec
|
|
|
Stanley A30LRATA-16 3/8" Nutrunner 1450 RPM
For Sale Is: Stanley A30LRATA-16 3/8" Nutrunner 1450 RPM. This item is used. Without its factory packaging. I have no way of testing this, but I will guarantee this item fully functional or I will refund your payments along with the initial shipping costs. E-17 International Buyers- Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13e2ae74f9d-0xf8-
|
|
|
Caterpillar 3P2200 CAT Sleeve Metering Fuel Injection Pump Calibration Tools Kit
Caterpillar 3P2200 CAT Sleeve Metering Fuel Injection Pump Calibration Tools Kit Thank you for looking. Please check out my eBay Store: Starfish Unlimited for some great deals. Used Good Condition Genuine Caterpillar Not Aftermarket 3P2200 Sleeve Lever Calibration Tool Group For 3208 3304 3306 1108 1160 3160 Engines with Sleeve Metering Fuel Injection Pumps NOT for use on Forged Body. Compact or New Scroll Pumps With this tool group I have included a 5P4209 calibration tool which CAT sells separately. I included it with this tool group because it is needed along with this 3P2200 tool group to set 3208 cross over levers. This Tool Group has a dial indicator which insures more accuracy and allows you to set the sleeve levers to closer tolerances This tool group was used only a few times.There may be slight scratches from every day use. The ... morebox has slight scuffs and does not have the original label. These scuffs and scratches are cosmetic and do not affect the accuracy of the tools. The 3P1540 Calibration Pump included in this tool group has not been used at all because it is a replacement for the original calibration pump that was lost. In fact. It still has the factory protective wax coating on it. This auction/buy it now is ONLY for the item pictured. If you have any questions please contact me before bidding. I ship to the USA and Puerto Rico Only(No International Shipping) Combined Shipping Available We only accept PayPal. Payment must be made within 3 days of winning an auction/ Buy It Now. If for some reason you have a problem with payment you MUST contact me within three days of winning an auction/ Buy It Now so we can work something out. If Payment Is NOT received or arrangements made within one week of close of auction/ Buy It Now I will open a case on ebay for non payment and/ or relist the item. I ship to the United States Of America ONLY. I ship to all 50 states and Puerto Rico. No International Shipping) All items are shipped using The United States Postal Service. We ship your item or items within
|
|
|
CRL 8" VACUUM CUP No.W4950 Powr-Grip 8" Metal Vacum Cup professional quality
This is a barely used CRL 8" Vacuum Cup. Catalog Number: W4950 Fast Attachment on Smooth. Non-Porous Flat Surfaces, Check Valve Allows Re-Pumping Without Loss of Remaining Vacuum, Eligible for Exchange Program, Wood's Powr-Grip Vacuum Cups. These specially designed. Hand actuated cups operate on a pump system, and create a vacuum under their gripping pad section. The pump plunger has a red band to indicate suction level at all times. When it shows less than 100% vacuum left, simply pump the plunger until you reach the original vacuum pressure without removing the cup from the glass! To release, just depress a trigger on the opposite end of the handle from the plunger. There are four models of the basic Wood's Powr-Grip Vacuum Cup. All come with a vacuum-molded carrying case to protect the cup when not in use. Att. International ... morebuyers. Please read: The most inexpensive shipping service available is First Class with the USPS. This service offers a tracking number only up to the point the package leaves United States grounds. I will not be responsible for what happens to the item once it's out of the US. If you want the package insured and tracked. It will cost a lot more. Sometimes more that the item you're purchasing. Around $50 for this service and there is currently no other way. I can add this service at your request. By buying this item, you are accepting these terms, thanks. This shipping price is for within the U.S. ArielsPlanet.com*
|
|
|
Gorilla Lift Tailgate Lift Assist Model# 40101042G
Gorilla Lift Tailgate Lift Assist Model# 40101042G. Gorilla Lift Tailgate Lift Assist Model# 40101042G Condition: Unknown. The lift gate system came to us boxed. As shown. We have not pulled out the parts to conduct an inventory. We have sold a few of these customer return Gorilla lift assist systems in the past and they have been ok, no customer complaints so far. With that said, we are selling as condition unknown, and our low price reflects such. As always, you are welcome to refund the item if you are not satisfied(minus shipping) Thank you. We have a couple of these in stock. While they last(sold separately) Shipping will be a little high. The box weighs 35lbs and they are long. We are sellers of liquidated merchandise. Merchandise is liquidated for many reasons. Such as freight(shipping) claims, customer returns, close outs, display ... moremodels and etc… Most of the merchandise we buy was liquidated resulting from freight(shipper) claims(damaged box, crate or scratch and dent items) We make every effort to sell only items that are in good working order. However we can only test each item to the best of our knowledge. All known information about each item is included in our Condition Recap, listed above. Email with any questions, thank you. Shipping: Our default method is USPS Parcel Post(lowest cost) We also offer USPS Priority Mail and UPS Ground. You can make your selection at checkout if you want something other than Parcel Post. Sometimes Priority mail cost the same or lower than Parcel Post. If this is the case. We automatically ship Priority for you. We do not make money on shipping, nor do we add handling fees. We charge actual shipping only, not a penny more. Thank you.
|
|
|
PROP MATE 116 STAINLESS STEEL MARINE OUTBOARD MULTI WRENCH
PROP MATE 116 STAINLESS STEEL MARINE OUTBOARD MULTI WRENCH.It's 10 inches long and good condition.Please look at pictures.This is not my full time job. I'm trying my best at describing things. I will try to answer questions asap. Ship to lower 48. Payments due 3 days after auction ends please. No returns. I will be doing my shipping on Wednesdays after payment clears. Thanks for looking. Have a great day.
|
|
|
Tapco Brake Buddy 11151 Siding Trim Tool Little Use
This Tapco Brake Buddy is being put up for auction. It is in excellent condition and looks like it has barley been used. Please ask any questions that you may have. Thanks for looking! Payment Policy We only accept payment through Paypal. Payment is required within 4 days of auction close or item will be re listed and an unpaid item case will be opened. Item will normally be shipped out with in 24-48 hrs of payment received. Excluding Sunday and Mondays. Shipping Policy We ship to The United States Please ask about International shipping before bidding! Items will be shipped by USPS Priority Mail with in 24-48hrs excluding Sunday and Mondays. All items over $200.00 will be shipped with insurance. About Us Mason Pawn is Northern Colorado's largest Pawn Shop. With over 5000sq feet of retail space. We are a locally owned and operated pawn ... moreshop. We consistently loan more on items than our competitors, as well as reward our customers for picking their stuff up early. We also offer the lowest rates on local payroll check cashing. We are located at 6508 South College Ave. Fort Collins, CO 80525. If in the area stop in and check us out. Store hours(MST) Monday- Saturday 9:30am to 7:00pm Sunday- 10:00am to 5:00pm Please feel free to call us at(970) 282-7296 during business hours with any questions or for return information. Be sure to check us out on Facebook. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Brown and Sharpe Micro-Hite Digital Readout Height Gage Technical Manual
Brown and Sharpe Micro-Hite Digital Readout Height Gage Technical Manual For Models 599-1011-20 and 599-1011-32 Set includes one each of the following items: Install. Operation and Service Manual-99-99990-88-1 You will recieve the actual manuals shown in the photo. This particular manual is a copy. We ship immediately via USPS Priority Mail On Mar-11-13 at 20:21:23 PDT. Seller added the following information:
|
|
|
Graco EXP2 Proportioner Foam and Polyurea Sprayer Reactor
You buy a Graco Reactor for two reasons 1) Reliability 24/7 and 2) When it comes to selling it. People know you have real quality This machine is no different. It has been a reliable support machine to our two Hydraulic Graco's We've cleaned off the Iso and the normal gunk that gets on a machine. Given the main body a lick of paint and changed the main power isolator because the original was as stiff as hell and eventually the original isolator lever snapped The machine runs very well. Builds pressure perfectly as you can see from the pics, heater banks works perfectly and keypad is in excellent condition. Currently the machine is in storage/shipment mode i.e. it has been flushed with MEK(a gentle solvent) and all the lines are full of MEK. This machine is 3 phase. 380v but this can be changed to 230v very easily(Graco do a wiring ... morediagram for that) The machine includes what you see in the photos but does not include stick pumps, hoses, pistol i.e. the bare machine. Also one of the photos is of the rear of the machine with the heater banks exposed. Please note there is a metal cover for this heater bank- not pictured I had this machine sold previously but a tire kicker wasted my time and never pitched up with the money. So for the avoidance of any doubt. The tires are perfect on this machine, I have kicked them a few times to make sure, so genuine inquiries only. This machine is priced to sell and represents a massive discount on the new price. The machine is located at our premises in Co. Mayo. Ireland. I have the machine advertised as collect in person, but I can pallet and ship worldwide or you can organize your own collection if you wish. Machine will be released once cleared funds have been released. The asking price does not include shipping costs You can phone me on +353 87 2416181 for any further information
|
|
|
TRUMPF N 500-2 METAL NIBBLER PLUS ACCESSORIES
The only nibbler of its class that can cut 90 degree bends(crash barriers. Tanks, containers) Easily cuts edges. Weldments and doubled sheets, regardless of angle No extra tools needed to exchange punch and die Reverse cutting available as an option Electronically controlled"soft start" Chip collection device(chip bag) available Adusts to 3 cutting directions Areas of Application Nuclear deommissioning Recesses and fitting work Sheetmetal work of all types Containers Recycling work Plumbing and maintenance Car body work Demolition and dismantling TRUMPF Nibblers: An advanced cutting process here to stay. Suitable also for use with high tensile materials Easy to change tools. Most can be resharpend multiple times Above-average tool life. Cut quality remains consistently high, Nice used item. Appears to have extremely lite use,if ... moreany. Extra spare parts include, blades ect. manual.
|
|
|
Cleco 5BRSAUTP-250 Pistol Style Air Driver
Cleco#5BRSAUTP-250 Pistol style air driven nut/ screw driver. Item is in very good condition with very little signs of wear. Posted with the
|
|
|
DAYTON 5 LB BALANCER #2Z372
This is a DAYTON BALANCER with a 5 LBS. Capacity. It is Model# 2Z372. A Dayton Electric MFG. Co. Chicago. Illinois 60648 Product. Made in the U.S.A. PLEASE CHECK MY OTHER LISTINGS TO RECEIVE A DISCOUNT ON COMBINED SHIPPING! o.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpl%7E3go7%3Eo-13e2ed800cb-0xf6-
|
|
|
Bosch Job Site Radio Am Fm Cd Player Pb10-Cd Powerbox Power Box Pb 10 W Mp3 Mp 3
Description Auction for a Bosch Jobsite Radio/ CD/ MP3 player. Still has great sound and very loud! Digital display lights up and shows all functions. Has been previously enjoyed. Power cord in good condition. Charger battery compartment is clean. No remote with this unit. Outlets are working. CD player not working(does spin but reads"no disc" Please contact with any questions you may have. Posted with
|
|
|
Gesipa AccuBird 12 Volt Cordless Rechargeable Electric 3/16” Rivet Gun Riveter
YOU ARE BUYING FROM A SELLER WHO HAS*ALWAYS* HAD 100% POSITIVE eBAY FEEDBACK SINCE 1999. NOT JUST IN THE PAST 12 MONTHS. BID OR BUY WITH CONFIDENCE! This is a used Gesipa AccuBird 12 Volt Cordless Electric 3/16” Rivet Gun in excellent near-new condition. This is a powerful rechargeable electric tool that can be used for a wide variety of industrial. Shop, and homeowner applications. This great tool is essentially the same tool as the Emhart POP MCS 5800 manufactured in England, and the PT-3000 manufactured in the USA by Fastening Systems International(FSI) I believe this Gesipa AccuBird tool was manufactured in Germany. The AccuBird generates 1.900 lbs of pulling force. It will install a wide variety of blind rivets/fasteners up to 3/16” diameter. It features a threaded container that retains the spent rivet mandrels. The current version ... moreof the Gesipa AccuBird sells for $835 from a variety of sources: This listing includes the Gesipa AccuBird tool. One(1) 12 V NiCd battery, battery charger, four(4) nosepieces, nosepiece wrench, steel storage case, and operating instruction manual. This tool is compatible with 12V NiCd batteries and chargers made by Gesipa. Emhart, and FSI, which you can frequently find for sale on ebay. It is also compatible with a wide variety of nosepieces from Gesipa, Emhart, FSI, and other manufacturers. ITEM CONDITION: This Gesipa AccuBird tool. Battery charger, and battery are in excellent very clean near-new condition. The tool itself has only a few extremely minor cosmetic scuffs and scratches on the outer surfaces. A few of the nosepieces show some wear from use but are in excellent condition. The steel storage case is also in excellent condition with some minor scuffs and scratches on the outside. I charged the battery and tested the tool on a few rivets. The tool pulls strongly and works great. The battery appears to charge up just fine and hold its charge. But I have no way of knowing how much life it has left and I offer no guarantee. But this tool appears to not have been us
|
|
|
Wacker 3" Diaphragm Pump
Hello and thanks for looking. I have for sale here a Wacker 3" Diaphragm Pump. This pump runs and has great suction and is in great working order ready to help you keep your job site clean and dry. I have spent a good amount of time making sure that this piece of equipment functions properly. So that you can bid with confidence. The paint has been touched up and looks good for a piece of equipment that came to me covered in dirt, grease and grime. The engine has been inspected and runs properly. I have installed a brand new E3 spark plug, and a brand new air filter. You can see both of these things in the photos. I also painted and put a brand new set of wheels on the pump. The handle has been painted with truck bed liner paint. It has a little texture for extra grip. This item is a USED item and is sold as such. Should you win the auction ... moreor choose to buy it with buy it now price. You accept the item"AS IS" I have done my best to represent the condition of the item by taking quality photos. But please become an educated bidder and do your research before you bid. I have shown an area of rust in one photo on top of the intake housing where I did not paint over it. I don't want to hide anything from my customers. However, that area does not affect performance of the machine. That being said, I am confident that this item is ready to go to work on your job site as it sits and will do you a great job and perform the tasks it was manufactured for. LOCAL PICKUP ONLY Should you want to pick this item up locally. I will be requiring a deposit from the winner/buyer. This deposit will be half of the final purchase price. Again, the deposit will be 50% of the final purchase price. The deposit is paid through PayPal and is required within 24 hrs. If the deposit is not received within 24 hrs, the item will re-list. Feel free to ask me any questions concerning deposit policy. Final balance is required IN CASH when you pick up the item. NO EXCEPTIONS. If picking up locally. You must be able to load this item
|
|
|
Graco Monark 5:1 Stainless Steel Hydra Clean Pump
Used Graco Monark 5:1 Stainless Steel Pump. model 205-997 in very good condition. Sold as is. No warranty. Pay Pal is prefered method of payment. If company check is sent it will not ship until bank clears the funds. Thanks for bidding.
|
|
|
Ridgid COLOR SELF LEVELING Seesnake Sewer Camera DVD 155ft Rigid See Snake
I am selling a Ridgid COLOR Self-Leveling DVD and Standard reel. This unit includes 155 ft of cable. The head is color and self-leveling. The reel has just had a fresh retermination and brand new frame installed. The DVD player is in very good shape and works great. The entire cable has been checked out and is free of kinks or slits. It also has the 512mz sonde behind the camera head. This set up works well and is ready to make you money. This MONEY MAKER retails for about $12.000 here is your chance to save some money! This set includes everything shown in the pictures! Make sure you check out my other auctions for more plumbing equipment! Payment: Paypal or USPS money order only. Payment must be made within 3 days after the end of the auction. Please have your paypal set up and ready to go! If you pay through E–Check Contact me immediately ... moreending the auction. Shipping: I only ship to CONFIRMED addresses no PO boxes no exceptions. Shipping price listed is for the 48 contiguous states. If you live outside the Continental US contact me for shipping quotes as they will vary. I ship quickly.once payment is received; the item is shipped within 1 to 2 business days in most cases. I do not ship on weekends unless prior arrangements are made. Local pick-up is fine. Feedback: I leave positive feedback for all smooth transactions and I ask for the same in return. I do my very best to describe items to the best of my ability and send them out ASAP. I will always try my best to make your shopping experience a pleasant one. I will leave feedback as soon as feedback is left for me! Again. Ask any questions you may have before bidding on any items! Do not assume anything. If it is not shown in the pictures or written in the description, chances are, it does not come with it! ASSUMING MAKES AN ASS OUT OF U AND ME! I will charge a $25.00 restocking fee for any one who backs out of a purchase. In the case of a refund shipping charges will NOT be refunded. Buyer is responsible for return shipping! Goo
|
|
|
Black & Decker Empty Cordless Drill Carrying CASE only ~ Sturdy Plastic
Black And Decker drill case 14 inches by 13-inch excellent condition. Posted with inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
Leviton The Box - Temporary Power Distribution
Used- Sold as is. Great price. I will give out free shipping to buyers just through paypal. Shows wear and tear from construction site.Leviton PB103 50 Amp. 125/250 Volt, Portable Power Distribution Center, YellowBrand Features Leviton Power Centers feature a variety of GFCI protected outlets and standard outlets to accommodate the variety of portable power equipment being used throughout the jobsite.Item Description The Box 50A 125/250 Volt Temporary Portable Power Distribution Center w/ 6 5-20R Straight GFCI Protected Outlets and One L6-30R Locking Non-GFCI Protected Outlet- Yellow Posted with eBay Mobile
|
|
|
Jacks & Accessories 2000-042 Mono-Strand Post Tensioning Jack & Nose USED
You are bidding on( 1) USED Jacks& Accessories 2000-042 Mono-Strand Post Tensioning Jack& Nose USED. P/N 2000-042. Includes 12" Nose-Hole Diz. 3/4" Double Acting. Area- 7.95. This Item is USED- SOLD AS IS Shipping will be UPS Ground for 65 lbs. We use Ebay Shipping Calculator to figure our shipping. We ship USPS Priority Mail unless item is listed with different shipping details. We Combine Shipping for Multiple Items. 18. Powered by 7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw5%7Fos1%3E%3E7-13e358b4503-0xef-
|
|
|
SUPERFLEX HETER, VEBASTO, WATER HEATER, DIESEL FULL. USE FOR MV, BULDING, FARM
OLD FROM SHELVE. IS NEW NEVER USE. PUL OUT FROM OLD BOX FROM GARAGE. MILITARY USE. DIESEL FULL AND DC POWER NEED. HEAD UP BULDING, FARM, WATER, TRUCK. QUESTIONS: 516.250.3264 ALEX ITEM IS IN Lindenhurst NY 11757 PAY PAL. USPS MONEY ORDERS, CHEKS, CASH AT PICKUP. SE MI OTHER ITEMS
|
|
|
mayco grout pump with spare parts
Older Mayco pump. Has been in storage for ten years. I am selling for my Dad.He used Mayco pumps for swimming pool construction for 30 years. Befor this pump was put in storage he rebuilt it and just had it for a spare pump when working out of town. I started it and pumped water with it and it worked just fine. It comes with the pallet of parts that can keep this pump in service for a long time. If it wears or breaks the part is most likely on the pallet.The pallet of parts would cost over $5.000 at dealer cost. I am listing this pump on other sites and reserve the right to remove from ebay. Pump and parts are sold as is with no warranty or return. Local pick up only or buyer may arrange shipping. May consider separating some of the larger expensive parts or as a lot if the price is right. Call Elden with any questions@ 316 648 90 three zero ... more4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e3ad1c686-0xf7-
|
|
|
LUFKIN MITI-MITE HEAVY DUTY TOOL WITH MULTIPLE METAL BLOCKS 6 pc
LUFKIN MITI-MITE HEAVY DUTY WITH MULTIPLE METAL BLOCKS USED; GOOD CONDITION; NO PERSONAL MARKINGS PLEASE SEE PICTURES FOR BEST DETAILS FOR THE ITEMS OFFERED I TOOK MULTIPLE PICTURES; HOPEFULLY IT WILL OFFER CLEAR DECRIPTION OF ITEMS_ T-SHELF_6/12/2012
|
|
|
2008 Magnum MLT3060KMH Portable Light Tower
2008 Magnum MLT3060KMH portable Light Tower with 6Kw Generator w/ Kubota Diesel Engine. The 4- 1000 watt light assemblies' offers complete flexibility with 360 degree rotation. Steadfast in winds up to 65+ mph, sturdy outrigger stability along with five to seven acres of light on the site. The generator has 2 110V outlets and 1 240V twist socket. It will run tools and equipment on the job site or power your house in an emergency. The hour meter reads 1928 hours. Features and Specs: Full tubular steel frame trailer 30 foot all-steel mast 4- 1.000 watt metal halide lights 4 point outrigger stance withstands 65+ mph winds Reliable 4-stroke diesel engine– Kubota Marathon generator Low oil/high temperature automatic shutdowns Protective start limit breaker Simpler ballast configuration Individual light breaker switches& ballast indicator ... morelights Easy to Use Adjustable 360 degree mast rotation 120V and 240V convenience receptacles Lockable cabinet DOT running light package on trailer Fork guides on the mast and under the trailer Engine Make/Brand Kubota Model D905-BG-ES01 Aspiration Natural Type Diesel, liquid cooled, 4-stroke Power- Primehp(kW) 10.5(7.8) Power- Standby hp(kW) 12.2(9.1) Operating Speed rpm 1800 Displacement cubic in(L) 57.97(0.95) Cylinders 3 Fuel Consumption- Prime gph(Lph) 0.47(1.78) Generator Make/Brand Marathon Electric Type Brushless Insulation F Generator Set(Engine/Gen) Output- Standby kW(kVA) 6.0(6.0) Output Voltage V 120/240 Output Amperes 120V(240V) 50(25) FrequencyHz 60 Power Factor 1.0(1 Phase) Lighting Lighting Type Metal halide Ballast Type Coil& core Lumens 440,000 Coverage acres(sq. meters) 5- 7(20,234- 28,328) Capacities Fuel Tank gal(L) 30(114) Coolant(incl. engine) qt(L) 4.5(4.3) Oil(incl. filter) qt(L) 3.8(3.6) Maximum Run Time hrs 64 Size and Weight Maximum height of tower ft(m) 30(9.14) Length w/ mast stowed in(m) 170(4.32) Width in(m) 49(1.25) Width w/ outriggers extended in(m) 98(2.49) Height w/ mast stowed in(m) 68(1.73) Dry Weig
|
|
|
Diamond Blade Measuring Tool
Diamond blade measuring tool if is in good condition. Can measure diamond blade and diamond core bits. Posted with
|
|
|
Vintage Locksmith Tool Bulldog 3½" Ratchet double side reversing Screwdriver
Vintage Locksmith Tool Bulldog 3½" Ratchet double side reversing Screwdriver 2- 3/8" X 1/8" screwdriver slot blades in 90 degree offset with reversing ability and ¼" slot on end of tool. FOR SALE MY OLD USED TOOLS I was a locksmith for 30 years. Bought this back in the seventy's and it was used than so I don't really know how old it is but found it a very versatile tool. Retired now and selling off all my tools& supplies! CK OUT MY FEEDBACK– WILL SHIP WITHIN 2 BUSINESS DAYS OF PAYMENT! If you have any questions. Please e-mail me before bidding. ask questions at very end of listing, you may have to scroll all the way down to the very bottom!
|
|
|
AMERIC VAF3000A CONFINED SPACE BLOWER 12" DIAMETER INDUSTRIAL VENTILATOR 115 V
AMERIC VAF3000A CONFINED SPACE BLOWER 12" DIAMETER INDUSTRIAL VENTILATOR 115 V Click Photos to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description AMERIC 12” CONFINE SPACE BLOWER Model# VAF3000A CFM rating of 2.796 Stackable to save storage or work area space Powerful 1 Hp electric motor Capability to connect up to 125 feet(38 m) of straight duct Ideal for confined spaces that require greater airflow For use in non-explosive environments 115 Volt Each unit appears to be in good used condition. Refer to pictures for details. Retail, this item would cost over $540.00 each! You are purchasing one item per order, however, more are available for immediate purchase! For other great deals on Construction Surplus items, Please check out our store! We are surplus equipment dealers with a wide ... morerange of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top p
|
|
|
Ferm Biscuit Jointer FBJ-710 - Hardly Used
Ferm Biscuit Jointer FBJ-710 Excellent condition- only used for one job. Complete with case- though the 2 case clips are broken.
|
|
|
Alligator C187 Fastner Tool. Also For tools 125&187
Alligator C187 Fastner Tool. Also For tools 125&187 YOU ARE BIDDING ON: 1- Alligator C187 Fastner Tool. Also For tools 125&187 PLEASE FEEL FREE TO ASK QUES TIONS! International buyers. We will ship worldwide, contact us before you make your purchase for an international shipping quote. If not listed as new PLEASE make sure you understand the following: They are from a working environment. They are untested and sold as-is. If Warrenty is needed do not buy this item. ALL ITEMS MAY HAVE LIGHT SCRATCHES. MAY HAVE SOME SMALL DENTS OR WARE. WE TRY TO PICTURE THEM TO REPRESENT THE CONDITION THE BEST WE CAN. IF YOU NEED MORE DETAILED PICS DO NOT HESITATE TO CALL OR CONTACT US. Monday-Friday 8a.m-5p.m Eastern 1-855-869-6191* WE WILL ENTERTAIN ANY OFFERS* PLEASE CONSIDER THE FOLLOWING WHEN BUYING ITEMS. WE ARE A RESALE WAREHOUSE. WE DO OUR ... moreBEST TO DESCRIBE EACH ITEM IN ITS TRUE CONDITION! Freight: Freight prices listed apply only when being shipped to a commercial address that has a loading dock and a receiving forklift. Shipping anywhere that doesn’t have these. Please contact us so we can requote the shipping costs. If you have any question please call JAY Cell 1-574-312-4837 Office 1-855-869-6191 Warehouse Location: D-1 Listed By: Abysntkrysis We gladly accept PayPal. Certified Funds, Credit Cards or Cash for local pickups. Shipping price shown is for shipping in the US to lower 48 states only. WE DO NOT USE OTHER CUSTOMER'S SHIPPING ACCOUNTS! Please ask us for shipping quotes on any item you want shipped anywhere else. We usually ship items on the day payment is received. Our shipping hours hours are from 8am-4pm Eastern time. All items come with a 14 day gurantee unless stated in listing. Buyer pays return shipping unless stated otherwise. FREIGHT SHIPMENTS: Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no
|
|
|
MBX MBX3200A ELECTRIC BLASTER SYSTEM 120 V 60 Hz 600 W
UP FOR BID A MBX MBX3200A ELECTRIC BLASTER SYSTEM 120 V 60 Hz 600 W. COMES AS SEEN IN THE PICTURES. COMES WITH EVERYTHING SHOWN IN PICTURES. PLEASE SEE ALL PICTURES. Please examine photos carefully for more information and do not hesitate to contact me with any questions that you may have regarding this item Thank you. I AM SORRY BUT I DO NOT SHIP TO HAWAII. ALASKA, PUERTO RICO. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. THANK YOU AND HAVE GREAT DAY.
|
|
|
Graco Reactor E-XP1 - Proportioner 69A-230V 1-PH - Package# 259024
Complete Turnkey Bedliner System. Includes A&B Transfer pumps, 50' Heated lines, Pneumatic Drum Mixer, and Spray gun(oil drums not included)
|
|
|
Terex diesel light tower
Terex 4 light. Light tower. In very good condition. Works well- has a Kubota 1.1 liter diesel motor with 467.5 hours. It has the TIERZ emissions rating on the motor. I am not sure of the year. Buyer is responsible for shipping or needs to arrange pick up. Call 530-340-3578 for more information.
|
|
|
Olympus Side View Tip Adapter for IV6C5 Industrial Videoscope 5mm optic tip
Olympus Side View Tip Adapter for IV6C5 Industrial Videoscope 5mm optic tip. P/N IF5D4X1 AT50S
|
|
|
Vtg Keuffel Esser, New York Mercury Machinist/Engineer Tool Set w/ Original Case
Vtg Keuffel Esser. New York Mercury Machinist/Engineer Tool Set w/ Original Case Description: Green velvet lined set Condition: very good looks to be complete. But may be missing one item? All items are in excellent condition Addt'l info: International orders: We now only ship Priority Mail International Payment: I expect to be paid within 5 days. Payment methods: All winning bidders: I only accept Paypal(due to eBay's new rules I have no choice in the matter) All USA Shipping prices include Delivery Confirmation If I mention AS-IS in the description. There are no returns Shipping: WE SHIP OUT ITEMS WITHIN 48 HOURS(PER EBAY RULES) Shipping costs: We strive to charge rates that are fair. And as low as possible. We ship with Priority Mail which is little more expensive but ensures that you receive your package safe, and in a timely ... moremanner. When leaving feedback. Please be aware that a star rating of 4 is considered below average, and can lead to the seller being punished by ebay. International: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. International shipping methods: WE SHIP PRIORITY MAIL INTERNATIONAL FOR ALL ITEMS Powered by
|
|
|
Panduit Battery Cartridge CT-BC25
New Page 5 New Page 3 Untitled Document Panduit Battery Cartridge CT-BC25 Click image to enlarge. Manufacturer: Part# MECI Part# Condition: Dimensions: Weight: Description: Panduit CT-BC25 734-0826 Used-Used Great Condition 5.75" Height 1.6 Lbs Panduit Battery Cartridge CT-BC25 Panduit Battery Cartridge CT-BC25 Type: NiCd Output: 14.4 VDC Date Code: 02/09 Needs Charged Manufacturer: Panduit Part# CT-BC25 Welcome to our eBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below.After winning an item in auction or completing a Buy It Now purchase, you have two check-out options: Check-Out Now! Click the at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after confirming your eBay purchase. Check-Out ... moreLater If you do not choose to Check-Out now. You will be notified by eBay via e-mail that you are the winning bidder. There is no need to contact us to arrange payment. We will automatically send you an e-mail within three hours of an auction closing. Our message will contain a link to our simple and secure checkout system, where you will be able to quickly and conveniently pay for your purchase. You may also continue purchasing additional items from our auctions or eBay store. You have 3 days from the end of the first purchase to add additional items to your order. All of your purchases will be consolidated into one checkout with one payment! Payment We accept the following forms of payment: PayPal- We will ship to the address provided on your PayPal payment only. Credit Cards(Visa. MasterCard, American Express& Discover) SALES TAX- For shipments to Ohio. We are required by State law to collect 7% Sales Tax. Shipping Cost and Policy USA Free Shipping& Handling for this item within the Continental United States Only. Canada- extra shipping cost apply. INTERNATIONAL- We will not mark as a gift in any circumstance. Shipping cost does not include import taxes. Dut
|
|
|
Graco Monark 23:1 Paint Spray Pump on cart
Used Graco Monark 23:1 Paint Pump. model 205-530 air motor and 223-596 fluid pump. Comes with Cart. Regulators, Paint filter, High pressure dump ball valve. in very good condition. I tested it with Mineral Sprits and it pumps well, put in 100 psi air and got 2300 psi fluid pressure. Looks like it is ready to go to work. Sold as is, no warranty. Pay Pal is prefered method of payment. If company check is sent it will not ship until bank clears the funds. Thanks for bidding.
|
|
|
3 WAY ELECTRICAL SPLITTER EXTENSION CORD~10GA~3 PRONG~125V~20AMP~COMMERCIAL
3-WAY ELECTRICAL POWER SPLITTER/EXTENSION CORD 1OAWG~3 PRONG/WIRE~125V~20AMP COMMERICAL/CONTRACTOR GRADE ORIGINAL PLUG ENDS NO ISSUES~NO TEARS~NO CUTS~NO FIXES PREOWNED CONDITION~NO CLEANING NOR DETAIL DONE PLEASE REVIEW ALL PICTURES~ASK ANY QUESTION[S] WORLDWIDE SHIPPING SERVICE CHECK MY OTHER NO RESERVE AUCTIONS FOR MORE TOOLS AND SUPPLIES
|
|
|
INGERSOLL RAND 7802R ¼" HEX DRIVE PISTOL GRIP PNEUMATIC SCREWDRIVER REVERSIBLE
USED ITEM BUT IT WORKS JUST FINE. I WILL SHIP WITHIN 24hrs AFTER GETTING PAID. I WILL PROVIDE TRACKING NUMBER. RETURNS ACCEPTED.
|
|
|
HILTI TOOLS SALESMAN SAMPLE FIRE BLOCK DEMO CASE, RETAIL COUNTER DISPLAY
TO SKYNON'S TOOLS! THIS IS A USED SALESMAN FIRE BLOCK DEMO CASE BY HILTI FIRE BLOCK FOAMS AND PUTTY FOR CONSTRUCTION PUTTY STICK 2" COLLAR(CP642) FS-ONE FIRE FOAM CP606 SPEED SPRAY CP601S CP604 MIGHT HAVE BEEN A RETAIL STORES COUNTERTOP DISPLAY COMES JUST AS PICTURED NO RESERVE! WE ALWAYS HAVE SEVERAL AUCTIONS RUNNING WITH QUALITY NAME BRAND TOOLS.CHECK THEM OUT! Import duties. Taxes, and charges are NOT INCLUDED in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/ buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up- do not confuse them for additional shipping charges We do not mark merchandise values below value ... moreor mark items as"gifts" US and International government regulations prohibit such behavior.
|
|
|
JP NOLAN & Co. 52001 50A GFI PROTECTED TEMPORARY POWER SPIDER BOX
Please see other items being listed! You are bidding on: JP Nolan& Co. T emporary Power Spider Box 52001 50A/ 120/240 Volts/ 3 Pole 4 Wire/ 1 phase/ 60 Hertz/ 10.000 AC DESCRIPTION: This box is used but in good condition. Always stored in doors. PAYMENT/SHIPPING SMOKE FREE HOME PET FREE HOM E NEXT DAY SHIPPING FREE CONFIRMATION COVERED BY EBAY PROTECTION(Unless out of country) WE SHIP THE NEXT BUSINESS DAY WE RECYCLE MATERIALS A LOT. ITEMS WILL ALWAYS BE PACKED SAFELY YOU WILL RECEIVE POSITIVE FEEDBACK! ~ ALWAYS PAYPAL OR ANY OTHER FORM OF PAYMENT OK CALIFORNIA TAX APPLIES TO CALIFORNIA RESIDENTS Returns okay! Buyer pays return shipping unless item received as not described. I SHIP INTERNATIONALLY! OUT OF COUNTRY BUYER PAYS INTERNATIONAL SHIPPING. BUYS ITEM AS IS, NO RETURNS! On Apr-21-13 at 18:11:37 PDT. Seller added the following information: ... moreON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
|
|
|
Atlas Copco LTV-37-SR004-13 Nut Runner/Torque Gun 1/2" Drive Pneumatic Nutrunner
Atlas Copco LTV-37-SR004-13 Nut Runner/Torque Gun 1/2" Drive THIS ITEM IS USED AND HAS SOME RUST AROUND THE ONE END. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# LTV-37-SR004-13 OVERALL DIMENSIONS: WIDTH: 3" LENGTH: 19" HEIGHT: 2" SHIPPING WEIGHT: 10 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES ... moreAND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S W
|
|
|
Used Tri-Tool 616RBL Low Profile Clamshell Pipe Beveler w/ Air Motor & Air Caddy
Tri-Tool Clamsheel Pipe Beveler. Cutter Just In! Tri-Tool 616RBL Pipe Beveler with 7786-2 air motor and air caddy. Great condition with light use. Cutters also included. For 10" to 16" Pipe Shipping weight 700 lbs Save on shipping with multiple purchases! Email us or call Mark Griffith at 1-800-333-2151 ext 470 for further questions. Shipping: All items will be shipped via UPS Ground(signature required for transactions over $250.00) except items requiring freight services. Residential addresses or addresses without unloading facilities will need to pick up freight at local terminal. Email us or call Mark Griffith at 1-800-333-2151 ext 470 for a quote and specify if shipping to a residential address or a business address with unloading facilities. I think you will agree that our freight rates are very competitive. Of course we always ... moretry to get the item out as quickly as possible. But due to high demand it may take longer. All used items except those marked“as-is” will be cleaned, tested and any needed repairs done prior to shipping. Please allow two weeks for delivery. New items will normally ship that business day. Payment: Payment can be paid by Calling 1-800-333-2151 ext 470. We can accept Visa. Mastercard and American Express over the phone. Call for other payment methods. Payment is due within seven days, unless other arrangements are made. If payment is not made within seven days a dispute will be opened through eBay. Sales Tax: State and local tax will be calculated based on the customers ship-to address provided by the customer and added to the final sales order total. Where applicable, unless the customer provides F& M Mafco, Inc. with a tax exemption certificate. All Items are subject to prior sale!
|
|
|
Edco Digimatic Diamond Blade Gauge Blade Measuring Tool 8" to 24" Blade Capacity
Edco Blade Measuring Tool Check out my! Be sure to add me to your! Digimatic blade gauge Used to produce accurate measurements of how much material has been used from diamond blades. It is especially useful in the rental market. it is in used condition but great shape. Has been around the shop so i decided to list it. Features Micrometer and 9 position slots with Arbor adapters 8" to 24" Blade Capacity Anymore questions feel free to message and check out our other Auctions and thanks for looking.
|
|
|
Cushman Truckster Hand Rail Arm Rest 11"
Cushman Truckster 11" Hand Rail This hand rail is in good condition and ready to install. The picture you see is what you are bidding on.11" OAL
|
|
|
Cushman Truckster Hand Rail Arm Rest 15"
Cushman Truckster 15" Hand Rail This hand rail is in good condition and ready to install. The picture you see is what you are bidding on.15" OAL
|
|
|
Cushman Truckster 25" Steering Linkage
Cushman Truckster Steering Linkage This steering linkage is in good condition and ready to install. The picture you see is what you are bidding on. 25" OAL with 20" tube.
|
|
|
Cushman Truckster 327 Daihatsu Intake Manifold
Cushman Truckster 327 Daihatsu Intake Manifold This manifold is in good condition and ready to install. The picture you see is what you are bidding on.
|
|
|
cushman Truckster 22 HP U Bolts Coarse Thread
Cushman Truckster Coarse Thread U Bolts This item is in good condition and ready to install. The picture you see is what you are bidding on.
|
|
|
cushman Truckster 22 HP U Bolts Fine Thread
Cushman Truckster Fine Thread U Bolts This item is in good condition and ready to install. The picture you see is what you are bidding on.
|
|
|
Cushman Truckster 94 model Ignition Resistor
Cushman Truckster Ignition Resistor This resistor is in good condition and ready to install. The picture you see is what you are bidding on. ww
|
|
|
Cushman Truckster Thermostat Housing Cover 327 Daihatsu
Cushman Truckster Thermostat Housing 327 Daihatsu Engine This Thermostat housing is in good condition and ready to install. The picture you see is what you are bidding on. ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13e3ecb1de9-0xfe-
|
|
|
Cushman Truckster Front Spindle
Cushman Truckster Front Spindle This front spindle is in good condition and ready to install. The picture you see is what you are bidding on.
|
|
|
Cushman Truckster 94 model Front Spindle
Cushman Truckster 94 model Front Spindle This front spindle is in good condition and ready to install. The picture you see is what you are bidding on. This spindle is from a 4 wheel model and is larger than the older style spindles. This one is 10&1/2" high.
|
|
|
cushman Truckster 327 Daihatsu Clutch and Pressure Plate.
Cushman Truckster 327 Daihatsu Clutch and Pressure Plate This clutch and pressure plate is used but in good condition. The picture you see is what you are bidding on.
|
|
|
Cushman Truckster Emergency Brake and Drive Shaft
Cushman Truckster Emergency Brake Disc and Driveshaft This drive shaft and brake disc is used but in good condition. The picture you see is what you are bidding on.
|
|
|
Cushman Truckster 327 Daihatsu Oil Pickup Tube
Cushman Truckster 327 Daihatsu Oil Pickup Tube This oil pickup tube is in good condition and ready to install. The picture you see is what you are bidding on.
|
|
|
cushman Truckster 22 HP Inner Cooling Shroud
Cushman Truckster Inner Cooling Shroud This Shroud is in good condition and ready to install. The picture you see is what you are bidding on.
|
|
|
cushman Truckster Steering Wheel
Cushman Truckster Steering Wheel This steering wheel is used but in good condition. The picture you see is what you are bidding on.
|
|
|
Door knob and lock boring jig and drill bit, Weiser and Schlage
OVERALL CONDITION: very good+. Blades on door latch jig are sharp. Knobs turn but need lubricating. SIZE: Schlage is 2.25" inside diameter and weiser is 2" inside dimeter HANDLING FEES. POSTAGE AND INSURANCE Unless item is specially noted as free shipping. Policies are as follows: HANDLING FEES: $4.00 PER EACH ITEM PURCHASED. + POSTAGE: PER WEIGHT VIA UNITED STATES POSTAL SERVICE. MULITPLE ITEMS WILL BE SHIPPED IN ONE BOX TO SAVE WEIGHT AND THEREFORE POSTAGE. BUYER MUST PAY FOR PRIORITY MAIL FOR ITEMS $200.00 OR MORE. International Shipping Information*International buyers are responsible for customs fees and may run into delays due to customs inspections. INTERNATIONAL POSTAGE: First class international for items under 4 pounds. Priority mail for items over 4 pounds. ALL ITEMS VALUED AT MORE THAN $200.00 MUST BE SHIPPED PRIORITY ... moreMAIL with insurance AT BUYER EXPENSE. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
QEP 21044 BRUTUS 17" CLINKER TILE CUTTER USED IN BOX WORKS WELL
Used a few times complete nothing broken includes parts order sheet 15 LBS after proper packing from Denver CO 80221 U.S.A. PAY PAL ONLY ALL ITEMS MUST BE PAID WITHIN 7 DAYS OF AUCTIONS END we do not ship to Alaska. Hawaii, P.O box's or APO/FPO locations. you will need a street address for fed ex delivery. We do not use other peoples shipping accounts to send packages! if your country does not show price in shipping calculator and item is 10 lb's or more or larger than 14 X 14 X 14 we do not ship to your country. PLEASE DO NOT ASSUME SOMETHING MAY BE INCLUDED WITH THIS ITEM IF IT IS NOT PICTURED OR MENTIONED IN LISTING IT IS NOT INCLUDED EMAIL ME WITH QUESTIONS BEFORE BUYING I CAN NOT SEND REFUNDS OR OFFER RETURNS BECAUSE YOU ASSUMED SOMETHING WAS INCLUDED WHICH IS NOT SHOWN OR MENTIONED THAT IT IS INCLUDED THIS INCLUDES THINGS SUCH ... moreAS MANUALS. BATTERIES OR ORIGINAL FACTORY PACKAGING! OUR GOAL: we strive to provide 5 star service as leaving anything less than 5 stars in each category is the same as leaving negative feedback! if your item was not as described or damaged in shipping PLEASE contact us FIRST before ebay. Before pay pal, before returning item and before posting negative feedback! we want you to be 5 stars happy: Please do not leave a low star rating for item not as described if your item was damaged in shipping as it was caused by improper handling not our description! I now ship mostly with Fed Ex and I reserve the right to choose shipping provider unless you pay for any sort of expedited shipping then we will ship the way you paid for. the post office quit allowing parcel post ebay label printing on 01/27/2013 so I no longer use them unless the item weighs less than 5 LB's after packaging. I do not require signature for delivery unless it item is over $250.00 if you want signature delivery or special needs like place package by backdoor please ask when sending payment in pay pals instructions to seller box when paying or an email before payment is made. I can not be responsible for stole
|
|
|
Rehvac MBK-6 Lightweight Drain Cleaning System
Rehvac MBK-6 Lightweight Drain Cleaning System One- 87" hose One- 2.5 lb Aluminum Cylinder with ABS high impact carry case One- 0-250psi Adjustable Regulator with internal bleed-down safety*Payment* PayPal is the only form of payment accepted. Terms of Sale* RETURNS: Returns are ONLY accepted if we have misrepresented the item in anyway. All sales are final. We are honest with our descriptions and therefore cannot accept a return. Return shipping costs will be paid by the bidder. Please contact us with any questions you may have before bidding. We are happy to answer them and thank you for understanding our return policy. If there is an issue/problem. Please e-mail us before leaving negative or neutral feedback. Please give us a chance to correct the problem before leaving permanent feedback as positive feedback is very important to ... moreus. Thanks for looking and happy bidding! Upon winning bid contact by email so I may send invoice. Shipping* All items are packaged very well. We take pride in our packaging. However. Insurance is always a good option. If you would like to insure your package, please let us know and we will add the cost to your invoice. We will not be responsible for items damaged in shipment that are not insured.
|
|
|
Graco air purge gun handle
Graco spf gold air purge handle. Posted with
|
|
|
AIMCO URYU UEC-5RC TOOL CONTROLLER WORKSTATION SELECTOR SWITCH AIR PNEUMATIC GUN
AIMCO URYU UEC-5RC TOOL CONTROLLER WORKSTATION SELECTOR SWITCH AIR PNEUMATIC GUN Description. AIMCO URYU UEC-5RC TOOL CONTROLLER WORKSTATION SELECTOR SWITCH PANEL.
|
|
|
Lot of 2 Masonry Bits: 3 Diamide 4 Twist 3/4" DIAMETER
Lot of 2 Masonry Bits: One bit has 3 Diamide 4 Twist on it. The other looks to be the same bit but the infor may have worn off. Bits look to be in great shape. Very light use. Bits measure 4 5/8" from start of threads to pointed tip of bit. 3/4" diameter Includes only what is shown in the picture. By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1. All items are sold“AS IS” No warranty or liability is expressed or implied. 2. The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged that no claim shall be brought against ... morethe seller. 3. We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or similar addresses. 4. The buyer agrees that the item fits the buyers purpose prior to bidding. 5. The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6. We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7. All our items are wholesale. Overstock, unclaimed, foreclosure purchase or salvage goods. Most boxes have been opened for inspection and photos. If items are listed as new they may not come with original packaging. 8. The buyer agrees there will be no refunds for any reason. 9. Shippi
|
|
|
Drill Power Change 786 Quick Change adapter
This item is: Drill Power Change 786 Quick Change adapter. Used. Includes only what is shown in the picture. By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1. All items are sold“AS IS” No warranty or liability is expressed or implied. 2. The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged that no claim shall be brought against the seller. 3. We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or similar addresses. 4. The buyer agrees that the item fits the buyers purpose prior to bidding. ... more5. The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6. We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7. All our items are wholesale. Overstock, unclaimed, foreclosure purchase or salvage goods. Most boxes have been opened for inspection and photos. If items are listed as new they may not come with original packaging. 8. The buyer agrees there will be no refunds for any reason. 9. Shipping to the continental US only. Payment must be received within 2 calendar days of auction close. Warehouse Location: N Powered by The free listing tool. List your items fast and easy and manage you
|
|
|
Concrete Step Edger float
Concrete Step Edger float. Used condition. Normal 0 false false false EN-US X-NONE X-NONE Shipping to the continental US only. Payment must be received within 2 calendar days of auction close. Includes what is shown in the picture. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CRANE HANDBOOK BY CONSTRUCTION SAFETY ASSOCIATION OF ONTARIO HARD COVER
HI. WELCOME TO MY EBAY SITE I WILL BE SELLING ALL KINDS OF THINGS I BUY STORAGE UNITS SO CHECK IT OUT ALL THE TIME SO YOU DON~T MISS ANYTHING I DO DISCOUNT SHIPPING JUST ASK ABOUT IT. HERE WE HAVE A CRANE HANDBOOK BY CONSTRUCTION SAFETY ASSOCIATION OF ONTARIO HARD COVER 304 PAGES GREAT SHAPE THATS ALL I KNOW ABOUT IT CAME FROM STOREAGE UNIT SHIPPING TO US $8.00 TO US ONLY
|
|
|
GSE TECHMOTIVE single SERVO CS4000 SYSTEM CONTROLLER TECH MOTIVE
CS4000 Controller by GSE Tech-Motive. Pn 484000-02481. Tool Control module is P/N 4954100-03c5 which replaces P/N 49r4100-03C5 This was working when it was removed from its previous location See my other auctions for torque gun that was with it Model: CS4000. 120 Volt model Email me wilth any questions before bidding Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Atlas Copco Cable Article No. 4220-0982-05, Ser# D 664-103-H Used
Up for auction is 1 Used Atlas Copco Cable Article No. 4220-0982-05. Ser# D 664-103-H Used Please contact me with any questions.
|
|
|
Spinlab Current Transfomer field tester 660 , 2100 Optic Dog
Spinlab Current Transfomer field tester 660. 2100 Optic Dog Condition: USED An item that has been used previously. The item may have some signs of cosmetic wear. But is fully operational and functions as intended CK ALL PHOTOS THANKS 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and IF YOU HAVE ANY QUESTIONS PLEASE FEE L FREE TO Call us@ 248-521-7777 thank Please allow 4-6 days for shipping and handling. Thank you.
|
|
|
Uryu Seisaku UXR-2400S 1" Air Impact Torque Gun
Description Uryu Seisaku UXR-2400S 1" Air Impact Torque Gun Made in Japan Excellent Working Condition Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and ... moremore. We are committed to 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
|
|
|
5 NEW DESOUTTER CP TOOL CABLES 6159170840 6159176120 6159175410 6159171020 EME
Five(5) new DESOUTTER& CP tool cables; clockwise from top left of photo: CP(desoutter? 6159170840 Extension cable ER TwinCVI 10 meter; the next 4 are Desoutter. 6159175410 Cable EME 5 meter; 6159172410 1 meter ESD cable; 6159171020 EM Torque cable for TwinCVI 5 meter; 6159176120 Extension cable EME 15 meter. Clean new cables in original boxes. Boxes show a little shelf wear, some writing. Four of these are dated 2011, one is 2008. Your bid is for all 5, offers considered on individual items. Questions welcomed, thanks for looking.
|
|
|
Kodak DCS 330 COLOR DIGITAL CAMERA NIKON Pronea 6i - 2000 ACTUATIONS!
This auction includes ONLY the body- this camerea has 7 total actuations on it- it was used internally at Kodak and obviously never saw much use. It is power tested only and not guaranteed beyond powering on.
|
|
|
OFFER & WIN STANDARD GAGE E8-8000 WITHOUT CONTROLLER
OFFER& WIN WE GUARANTEE THE LOWEST PRICES If You Find This Item At Lower Prices Than Ours, We Promise To Sell It Cheaper Than That Which You Have Found. ITEM FOR SALE: STANDARD GAGE E8-8000 WITHOUT CONTROLLER USED You have 7 days booting warranty from time you receive the device to check if it is fully functional. PLEASE DO NOT ASK US TO LOW-DOWN THE VALUE OF THE INVOICE. IT IS AGAINST OUR POLICY. IMPORTANT! PLEASE OPEN PACKAGE IN THE PRESENCE OF THE CARRIER/TRANSPORTER TO MAKE SURE THAT THE ITEM IS OK AND IS NOT CRUSHED. OTHER WAY WE WILL NOT PAY FOR ANY DAMAGES. If the device does not work please inform us about its. There is always a positive way of finishingg the transaction before you leave a negative or neutral feedback. Please be assured that when You buy more than one item they might not look the same as the one in the picture ... moreSHIPMENT All items will be shipped by UPS courier. Costs: Items to North America will be shipped by registered priority airmail: 150 $ Customers from Europe(all countries) South and Middle America, Asia, Africa, Australia and Oceania: Please send me Your zip code so I could tell You the price of the shipment. If you have any questions. Please write or call. Contact with me: Mobile: +48 880 858 387 Phone: +48 15 842 36 35 Fax: +48 15 642 76 98 E-mail: mt.agat@gmail.com
|
|