|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Chino, United States Warm tips: The air source of the air compressor used by the customer needs to be installed with an oil-water separator before use, otherwise a lot of ... moremoisture in the air will run into the motor, resulting in the machine stuck It is usd for paint mix in paint factory. It is also used for mixing many kinds of dope. It is also used for homogeneity,dispersing in domestic industry,food industry,medicine industry. It is safe to use without spark and anti-explosive. Specifications working air pressure: 3.0~4.0Bar Blade: 6" * 2 Shaft size: 16 * 950 mm Motor: Pneumatic Mixing capacity: 50 Gallon /200L Tank Power: 1/2 HP Blade mterial: stainless steel Axial diameter:15mm Blade diameter:160mm Interface caliber:G1/4 Total height:1050mm.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Pneumatic Paint Mixer 20L 5 Gallon Tank Coating Barrel Mixing Blender With Stand. Paint Air Power Pneumatic Mixer 1/2HP W/ Air Lift Pail Lift+Power Stand ... more5 Gallon. Mixing propeller vane: aluminum alloy.
Buy It Now
$103.94 Shipping Condition: Used Location: Fleetwood, United States Cash on Pickup. All Major Credit Cards.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Are you still struggling to stir the raw material manually?. Are you still bothered by the poor performance of electric paint mixers?. Its 1/2 HP power ... moreand maximum 2000 rpm will greatly improve the mixing efficiency.
Buy It Now
Condition: Used Location: Canada MANUFACTURER: FRISTAM. -FRISTAM SHEAR PUMP. -PREVIOUS USE: FOOD & BEVERAGE APPLICATION. -MODEL: 25-53. -MODEL: FS3532-R-12-S-11. -MODEL: FZX-2250. -XP ... moreMOTOR: 20 HP, 575 VOLT, 1770 RPM. -XP MOTOR: 30 HP, 575 VOLT, 3545 RPM.
Buy It Now
$78.97 Shipping Condition: Used Location: Galion, United States But when available in multiple quantity, the photo shown is representative of the item. We're Not Perfect!
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Power type: Pneumatic Mixing capacity: 5Gallon Mixing propeller rod: φ15mm stainless steel Mixing propeller:φ100mm Mixing propeller vane: ... moreStainless steel Horsepower: 1/2HP Include: 1* Pneumatic Mixer Machine Feature： This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. It come with stand and shafts with the mixing propellers shown. The height of the stand can be adjusted. It need to work with an air compressor. It is used for paint mix in paint factory. It is also used for mixing many kinds of coating material. It is also used for homogeneity, dispersing in domestic industry, food industry, etc. It is safe to use without spark and anti-explosive. The air valve switch can be used to adjust the height automatically.
Buy It Now
$80.49 Shipping Condition: New – Open box Location: Galion, United States But when available in multiple quantity, the photo shown is representative of the item. We're Not Perfect!
Buy It Now
Condition: Used Location: Millwood, United States Clamp mounted mixer direct-coupled shaft. Mixer speed: 1725RPM. Impeller: Ø4" three blade.
Buy It Now
Condition: New – Open box Location: Middlebury, United States L2 Bench Top Mixer Variable Speed 2HP 208-230/460V 3Ph. Manual hydraulic lift Set up for explosion proof. Prefer to pick it up yourself?. Will there be ... morea dock or forklift. Size: Length: 36 in. Width: 29 in.
Buy It Now
Free Shipping Condition: New Location: United States Store Categories. Click to close full size. DAYTON 32V134 Open Drum Mixer.1/2 HP,316 SS. DAYTON. Item Specifics. Item. Open Drum Mixer. Type. Economy. ... moreMotor. 115 to 230V 1-Phase. Shaft Dia. In. 5/8. Propeller. 3 Blade. Type. Economy. Mounting Brackets. Adjustable. HP. 1/2. Shaft Length(In. 32. Motor Type. TEFC Electric. For Use With. 32V144. 32V146. Item. Open Drum Mixer. Shaft Material. 316 Stainless Steel. Max. RPM. 1750. Package Quantity. 1. California Prop 65 Orange Label. This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. California Prop 65 White Label. This product contains a chemical known to the State of California to cause cancer. Shipping A $5 shipping and handling fee is charged on orders totaling less that $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns Once your order is placed you will not be able to cancel the order. Once you receive the item. Please contact the Zoro Tools customer service team to obtain a return authorization(RA) number and a free shipping label. If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer service hours are Monday through Friday from 7:00 a.m. to 7:00 p.m. CST) About Us We understand the need for small businesses to stay competitive
Buy It Now
Condition: Used Location: Millwood, United States
Buy It Now
Condition: Used Location: Louisville, United States IN THE 40203 ZIP CODE.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. Pneumatic Paint Mixer 20L 5 Gallon Tank Coating Barrel Mixing ... moreBlender With Stand. 1 Pneumatic Mixer Machine.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specifications Motor: Pneumatic Mixing capacity: 50 Gallon /200L Tank Power: 1/2 HP Blade mterial: stainless steel Weight: 20lbs Size: 50*8*7 inch Feature ... more304 Stainless Steel Blade, Shaft and Coupler Easy Cleanup Augers High Solids Reduces Mix Time by 50%-80% Decreases Air & Electric Consumption by 50% Unique cut design creates superior dispersing and greater breakdown of agglomerates Item Included: 1 x 50gallonTank Barrel Mixer.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. Pneumatic Paint Mixer 20L 5 Gallon Tank Coating Barrel Mixing ... moreBlender With Stand. 1 Pneumatic Mixer Machine.
Buy It Now
Condition: Used Location: Clover, United States US ELECTRICAL MOTORS HAZARDOUS LOCATION MOTOR. NEW, no box. • Freight, etc. • Local pick up. SEE PICTURE 4 FOR DETAILS.
Buy It Now
Free Shipping Condition: Used Location: Greenville, United States Lightning 1/4 hp Mixer Type X5C25 Top Entering Type X5C25 Serial# RO5419866-01 Additional# on tag# 872273PSP 1/4 Hp 1725 rpm Top Entering flange mount ... morestyle 3/4" Shaft mount Electrical 208/230/460 Volt/ 60 Hz/ 3 phase/ 3.3 Amp Recently removed from a Major Food Plant Very Good Condition! For More Information. EMAIL tesales@used-equipment.com Call Kevin at(903) 355-1409
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1/2 HP 50 Gallon Pneumatic Mixer Rung Dope Tank 304 Stainless Blade Barrel Type. It is also used for mixing many kinds of dope. Safe and explosion-proof, ... moreno sparks. It is the best choice for open liquid drums.
Buy It Now
Condition: Used Location: Willoughby, United States BRAWN 21BTD7.5 MIXER. 316 SS SHAFT AND BLADES. Model: MIXER: 21BTD7.5GEAR REDUCER: 21HMX02AS. (4) BLADES: 24" x 10". SHAFT AND BLADES ARE 316 SS. Category: ... moreMIXERS.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
$68.43 Shipping Condition: Used Location: Millersburg, United States Lightnin XJ-30. Lift Tables. LET'S STAY IN TOUCH. Part Number B81R0153M-KE. Warehouse Storage Location : BQ-07-04. 25" overall length. We are dedicated ... moreto understanding the unique challenges and opportunities that each industry faces.
Buy It Now
$12.00 Shipping Condition: New Location: Monroe Township, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: ... more1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in Package Included 1*Pneumatic Mixer All Accessories for Assembly.
Buy It Now
Condition: Used Location: Fleetwood, United States The Philadelphia 3859M PT0 Raven 3800 Series Mixer Drive is a high-quality and powerful mixer drive designed for industrial applications. The mixer drive ... morehas a ratio of 57.70:1, ensuring optimal mixing and blending of materials.
Buy It Now
Condition: Used Location: Millwood, United States 20HP TEFC Disperser Motor with Belt Drive. 2" Disperser Shaft, Bearings w/Dust Seals, 1". Hi Viscosity for pastes. 200 Gallon Dual Shaft Mixer Vessel, ... more40" OD, 48". DS4 Mixer Lift Assembly, 10 HP TEFC Anchor.
Buy It Now
Condition: Used Location: Millwood, United States Fixed, pedestal mounting installed to a forklift portable base. Included stainless steel marine style, 3-blade impeller (14" dia.). with a 32" long stainless ... moreshaft. Runs on 230/460 volt, 60Hz, 3 phase AC power.
Buy It Now
$84.48 Shipping Condition: Used Location: Galion, United States
Buy It Now
Condition: New – Open box Location: United States Dynamix Agitator DMX Flange Mount Portable Mixer/Agitator. Baldor Motor: CC546293. 4" 150# Flange. South Houston, TX 77587. Item location: South Houston, ... moreTexas, United States. EXPORT COMPLIANCE. CIP - Door to Airport.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Specifications: Power type: Pneumatic Mixing capacity: 5Gallon Mixing propeller rod: φ15mm stainless steel Mixing propeller:φ100mm Mixing propeller vane: ... moreStainless steel Horsepower: 1/2HP Include: 1* Pneumatic Mixer Machine Feature： This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. It come with stand and shafts with the mixing propellers shown. The height of the stand can be adjusted. It need to work with an air compressor. It is used for paint mix in paint factory. It is also used for mixing many kinds of coating material. It is also used for homogeneity, dispersing in domestic industry, food industry, etc. It is safe to use without spark and anti-explosive. The air valve switch can be used to adjust the height automatically.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Power type: Pneumatic Mixing capacity: 5Gallon Mixing propeller rod: φ15mm stainless steel Mixing propeller:φ100mm Mixing propeller vane: ... moreStainless steel Horsepower: 1/2HP Include: 1* Pneumatic Mixer Machine Feature： This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. It come with stand and shafts with the mixing propellers shown. The height of the stand can be adjusted. It need to work with an air compressor. It is used for paint mix in paint factory. It is also used for mixing many kinds of coating material. It is also used for homogeneity, dispersing in domestic industry, food industry, etc. It is safe to use without spark and anti-explosive.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Power type: Pneumatic Mixing capacity: 5Gallon Mixing propeller rod: φ15mm stainless steel Mixing propeller:φ100mm Mixing propeller vane: ... moreStainless steel Horsepower: 1/2HP Include: 1* Pneumatic Mixer Machine Feature： This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. It come with stand and shafts with the mixing propellers shown. The height of the stand can be adjusted. It need to work with an air compressor. It is used for paint mix in paint factory. It is also used for mixing many kinds of coating material. It is also used for homogeneity, dispersing in domestic industry, food industry, etc. It is safe to use without spark and anti-explosive. The air valve switch can be used to adjust the height automatically.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Are you still struggling to stir the raw material manually?. Are you still bothered by the poor performance of electric paint mixers?. Its 1/2 HP power ... moreand maximum 2000 rpm will greatly improve the mixing efficiency.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States Laboratory Mixer,1/20 hp,115V AC 32V142. The mixer can be easily mounted and the shaft angle can be easily adjusted for optimum mixing. The mixer can ... morebe conveniently moved from one container to another, and can be mounted directly to tanks or on rails with opening adjustable clamp and a mounting bracket which adjusts for unlimited mixing angles.
Buy It Now
Condition: Used Location: Congers, United States 3 HP Homogenizer. In good shape. Explosion proof motor, 230/460 3 phase, currently wired 460.
Buy It Now
Condition: Used Location: Pedricktown, United States Motor is 10 HP, 230/460 volt, 1160 rpm. Stainless Steel Mixing shaft is 25.5" and 45" blade to the motor. From mixing blade to top of motor is 68". Mixing ... moreblade is 8" Dia. Stand is stainless steel and 9' overall height.
Buy It Now
Condition: Used Location: Leander, United States Manufacturer: Nord. Dock or forklift?. Depth From Top to Top of Curved Bottom: 22". Curved Bottom Depth: 4". Lab & Test. Residential area?. Model:Does ... moreNot Apply. Dura-Shield Shaft Seals.
8d 12h 33m 44s 0 bids
$1290.00 Now
$295.00 Shipping Condition: Used Location: Dayton, United States D-21238, 39, 40, 41. FREE scheduling, supersized images.
Buy It Now
Free Shipping Condition: New Location: Norcross, United States 50 gallonTank Barrel Mixer. Item Included:(140044) 1 x 50gallonTank Barrel Mixer. Motor: Pneumatic. Mixing capacity: 50 Gallon /200L Tank. Blade mterial: ... moreStainless Steel. Blade dia.:155mm. Power: 1/2 HP.
Buy It Now
Free Shipping Condition: New Location: United States Store Categories. Click to close full size. DAYTON 32V122 Open Drum Mixer.1/4 to 1/2 HP,316 SS. DAYTON. Item Specifics. Item. Open Drum Mixer. Type. Economy. ... moreShaft Dia. In. 5/8. Type. Economy. HP. 1/4 to 1/2. Shaft Length(In. 35. For Use With. Open Top Tank. Item. Open Drum Mixer. Shaft Material. 316 Stainless Steel. Max. RPM. 2000. Package Quantity. 1. California Prop 65 Orange Label. This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. California Prop 65 White Label. This product contains a chemical known to the State of California to cause cancer. Shipping A $5 shipping and handling fee is charged on orders totaling less that $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns Once your order is placed you will not be able to cancel the order. Once you receive the item. Please contact the Zoro Tools customer service team to obtain a return authorization(RA) number and a free shipping label. If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer service hours are Monday through Friday from 7:00 a.m. to 7:00 p.m. CST) About Us We understand the need for small businesses to stay competitive by not paying high prices for the products you need to keep your business running. By offerin
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specifications Motor: Pneumatic Mixing capacity: 50 Gallon /200L Tank Power: 1/2 HP Blade mterial: stainless steel Weight: 20lbs Size: 50*8*7 inch Feature ... more304 Stainless Steel Blade, Shaft and Coupler Easy Cleanup Augers High Solids Reduces Mix Time by 50%-80% Decreases Air & Electric Consumption by 50% Unique cut design creates superior dispersing and greater breakdown of agglomerates Item Included: 1 x 50gallonTank Barrel Mixer.
$201.13 Shipping Condition: Used Location: Shasta Lake, United States Used Mix Mor Model "G-11" Gear Drive Portable Mixer. Has Aluminum alloy gear housing with Accumix Variable Speed Control, Model # MM23401A. Control can ... morebe wired for 120/240 V AC, 60 Hz. Has 1 Hp. DC Permanent magnet motor, Dayton # 4Z378C, TEFC, 1750 RPM, 180 V DC, 5 Amps full load. Unit comes with manual, This mixer DOES NOT have the prop shaft, mixing prop or mounting clamps. Unit RUNS and in good condition. No longer needed, Thanks for looking.
Buy It Now
Condition: Used Location: Clover, United States Normal 0 false false false MicrosoftInternetExplorer4 PHILADELPHIA MIXERS ANOXIC MIXER ORDER NO. 14640 SIZE TYPE: PV-6 PTO MOTOR H.P. 7.5 INPUT RPM: 1800 ... moreOUTPUT RPM: 34 RATIO: 47.1-1 NOTICE: Please see pic#5 fan guard is missing. Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: Please see pic#5 unit is missing fan guard. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE SHIP OUTSIDE OF THE U.S. IF THE BUYER HAS A UPS. DHL, OR FEDEX ACCOUNT TO WHICH WE CAN BILL CHARG
Buy It Now
Condition: Used Location: United States LAB Banbury Mixer Machine. 60A 1444 HP 25AC 4 SPEED MOTOR 440 VOLT LOADED PRICE:$29.900.00USD OR BEST OFFER TERMS: PAYMENT FULL PRIOR TO SHIPMENT. PAYMENT ... moreMETHOD: WIRE TRANSFER F.O.B Akron. OH CONTACT: PEBSCOSALES@GMAIL.COM*PLEASE VIEW ALL PEBSCO INVENTORY FOR SALE ON EBAY BY TYPING IN"PEBSCO" UNDER ALL LISTINGS SEARCH BAR
Buy It Now
Condition: Used Location: Painesville, United States 20 liter Welex Papenmeier high intensity mixer. Stainless steel, Model TGAHK 20, stainless steel contact parts, jacketed bowl. We are Cleveland Process ... moreEquipment and specialize in the sales of used Pharmaceutical. Chemical And Plastic machinery. All auctions are subject to prior sale. You can email us your questions or check our website clevelandprocessequipment.com. Contact Number 440 409 4224 Ask for Bob Wells Sell us your idle unwanted equipment.
Buy It Now
Condition: Used Location: Cleveland, United States Lightnin Mixer .33 HP 115 Volts 44 “ shaft 4” Prop Missing Electrical Cover Tank Clamp Included
Buy It Now
$264.58 Shipping Condition: New Location: Provo, United States Lightnin SPX Mixer Impeller Hub For balde assembly. 3" dia center hole for 3" dia shaft. Made of 316SS. Will fit many different blade sizes ... morefrom 15" long blades to 70" blades. The three holes for the blade attachment are.726" dia. There are three holes in each ear of the hubs. Please call with any questions to 319-558-8308
Buy It Now
$121.96 Shipping Condition: New – Open box Location: Aguanga, United States Weg 1hp 55 gallon electric drum mixer. Bought for work but was never used. Paid $1400 and need it gone.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. Pneumatic Paint Mixer 20L 5 Gallon Tank Coating Barrel Mixing ... moreBlender With Stand. 1 Pneumatic Mixer Machine.
Buy It Now
Condition: Used Location: Chico, United States This 5HP Chemineer dual blade agitator process mixer is a model 1GTNC-5. Output RPM is 155-31. Operates from -10°F to 125°F. Blades are 12" x 3.75" of ... morewhich are there are three on each assembly. Attaches to a vessel (designed to work with pressure vessel, such as a reactor) via a 1.25" thick S/S 8-bolt flange.
Buy It Now
Free Shipping Condition: Used Location: Madison, United States Chemineer XPress Portable Industrial Food Mixer 1/4 hp Stainless Steel 3" Blade. Condition is Used, pulled working from closing factory. 24" long shaft, ... moreappx 3" diameter 3 blade mixer Adjustable bolt on flange mount. Please ask any questions prior to purchase. NOTE: mixer and shaft will be removed from motor prior to shipping to prevent damage - buyer responsible for reassembly.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver-black Style: Modern Power Source: Pneumatic Surface Treatment: Spray Paint ... moreAssembly Required: No Usage: Chemical Material Mixing/Paint Mixing/Ink Mixing Power: 1/4HP Stirring Capacity: 20L/5gal Speed: 0-2600RPM Working Pressure: 0.1-0.8mpa Air Consumption: 110L/29gal/min Applicable Barrel Height: Below 40cm/15.74in Impeller Diameter: 10cm/3.94in Rod Length: 45cm/17.71in Adjustable Height: 61-97cm/24-38.2in Gross Weight: 7.4kg/16.3lbs Net Weight: 6kg/13.22lbs Base Size(L*W*H): 38*38*2cm/15*15*0.78in Bracket Size(L*W): 26*8cm/10.23*3.15in Outer Column Size(L*W): 46*4cm/18.11*1.57in Package Size: 57*44.5*15cm/22.44*17.52*5.9in Package Included 1*Pneumatic Mixer 1*Chinese Manual All Access.
Buy It Now
Condition: Used Location: Millwood, United States Mixer housing is 21"W X 48"L, has a working capacity of eleven cubic foot. Bolted idle end plate for ribbon maintenance. Driven by a 2HP gearmotor & chain ... morereduction drive with reversing switch. Base footprint: 39"W X 48"L.
Buy It Now
Free Shipping Condition: New Location: Chino, United States It Is Also Used for Mixing Many Kinds of Dope. 1x Stainless Steel Pneumatic Paint Bracket Mixer. Mixing Capacity:50 Gallon /200l Tank. Motor: Pneumatic. ... moreEquipped with Pneumatic Motor Saving. Safe and Explosion-proof, No Sparks.
Buy It Now
Condition: Used Location: Trenton, United States Click To Enlarge- Used- Farrel Banbury Mixer. Model F80. Approximate 80 liter, 21 gallon, 116 pound working capacity. Chrome plated chamber, carbon steel ... morejacketed, drop door design. Wing style cored rotors, approximately 30-105 RPM. 10-1/2" x 24" feed opening with ram feeder. Driven by a 400 HP, 500 Volt, 1150/2300 RPM DC motor thru a Farrel gearbox, drive ratio 11.652:1. Includes a Farrel 2 HP hydraulic power pack, 2) Viking pumps, 1) modular force feed lubricator, Lubriquip Sentinel lube system, 440 Kva transformer, control panel and a Reliance Maxpak Plus VS drive panel. ref# 89079 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver-black Style: Modern Power Source: Pneumatic Surface Treatment: Spray Paint ... moreAssembly Required: No Usage: Chemical Material Mixing/Paint Mixing/Ink Mixing Power: 1/4HP Stirring Capacity: 20L/5gal Speed: 0-2600RPM Working Pressure: 0.1-0.8mpa Air Consumption: 110L/29gal/min Applicable Barrel Height: Below 40cm/15.74in Impeller Diameter: 10cm/3.94in Rod Length: 45cm/17.71in Adjustable Height: 61-97cm/24-38.2in Gross Weight: 7.4kg/16.3lbs Net Weight: 6kg/13.22lbs.
Buy It Now
Condition: Used Location: United States Mix Mor 2 HP Mixer MX2779 Tested
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver-black Style: Modern Power Source: Pneumatic Surface Treatment: Spray Paint ... moreAssembly Required: No Usage: Chemical Material Mixing/Paint Mixing/Ink Mixing Power: 1/4HP Stirring Capacity: 20L/5gal Speed: 0-2600RPM Working Pressure: 0.1-0.8mpa Air Consumption: 110L/29gal/min Applicable Barrel Height: Below 40cm/15.74in Impeller Diameter: 10cm/3.94in Rod Length: 45cm/17.71in Adjustable Height: 61-97cm/24-38.2in Gross Weight: 7.4kg/16.3lbs Net Weight: 6kg/13.22lbs Base Size(L*W*H): 38*38*2cm/15*15*0.78in Bracket Size(L*W): 26*8cm/10.23*3.15in Outer Column Size(L*W): 46*4cm/18.11*1.57in Package Size: 57*44.5*15cm/22.44*17.52*5.9in Package Included 1*Pneumatic Mixer 1*Chinese Manual All Access.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Are you still struggling to stir the paint manually?. Are you still bothered by the poor performance of electric paint mixers?. Its 1/4 HP power and maximum ... more2600 rpm will greatly improve the mixing efficiency.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing results. ... moreAre you still struggling to stir the raw material manually?.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: ... more1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in Package Included 1*Pneumatic Mixer All Accessories for Assembly.
|
|
|
|
1 HP Baldor Motor Mixer (Cat. No. FDL3510M, Spec. 35K633S245)
1 HP Baldor Motor Mixer Cat. No. FDL3510M. Spec. 35K633S245. 3 1/2" propeller. Shaft: 35" long. 5/8" diameter. 1725 rpm. A ph. 60 Hz. 115/ 208/ 230 volt. 13/ 6.8/ 6.5 amp. S/N F1196. Lot# 3313. Republic Textile Equipment Co. 803-684-2321 8am-5pm(EST) Please call for expedited orders. Sales Policy: When you enter a bid for one of our items. You enter into a contract- please place a bid only if you are serious about buying the item. If your offer is accepted, you will enter into a legally binding contract to purchase the item. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: Local pickups are free and always welcome! We are happy to combine shipping on multiple items. Please contact us(803-684-2321) for combined shipping prices. Common carrier shipments: Items going ... morecommon carrier are generally shipped the next business day following receipt of payment. Large items that require an LTL shipment generally go out the next business day following receipt of payment. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured- usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know. If we will be shipping to a business: The business name· The business' address· Contact information· If the receiver has a way to unload the pallet/ item or if we need to arrange for a lift gate. International shipping: We can ship outside of the U.S. Payment Details: We gladly accept PayPal. Certified funds, or cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy, and secure way to pay online. On large items we may request certified funds only.
|
|
|
3/4 HP Leland Faraday Mixer (Stock No. M-26584)
3/4 HP Leland Faraday Mixer Stock No. M-26584. 3 1/2" propeller. Shaft: 36" long. 5/8" diameter. 1725 rpm. 1 ph. 60 Hz. 115/208/230 volt. 10.5/ 5.4/ 5.2 amp. No mounting bracket for the tank. Lot#3299. Republic Textile Equipment Co. 803-684-2321 8am-5pm(EST) Please call for expedited orders. Sales Policy: When you enter a bid for one of our items. You enter into a contract- please place a bid only if you are serious about buying the item. If your offer is accepted, you will enter into a legally binding contract to purchase the item. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: Local pickups are free and always welcome! We are happy to combine shipping on multiple items. Please contact us(803-684-2321) for combined shipping prices. Common carrier shipments: Items ... moregoing common carrier are generally shipped the next business day following receipt of payment. Large items that require an LTL shipment generally go out the next business day following receipt of payment. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured- usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know. If we will be shipping to a business: The business name· The business' address· Contact information· If the receiver has a way to unload the pallet/ item or if we need to arrange for a lift gate. International shipping: We can ship outside of the U.S. Payment Details: We gladly accept PayPal. Certified funds, or cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy, and secure way to pay online. On large items we may request certified funds only.
|
|
|
3/4 HP Baldor Mixer (Cat. No. L3507)
3/4 HP Baldor Mixer Cat. No. L3507. 3 1/2" propeller. Shaft: 34 1/2" long. 5/8" diameter. Spec 35C11X935. Frame 56. 1725 rpm. 1 ph. 60 Hz. 115/208/230 volt. 11.5/ 5.5 amp. S/N F691. No mounting bracket for the tank. Lot# 3298. Republic Textile Equipment Co. 803-684-2321 8am-5pm(EST) Please call for expedited orders. Sales Policy: When you enter a bid for one of our items. You enter into a contract- please place a bid only if you are serious about buying the item. If your offer is accepted, you will enter into a legally binding contract to purchase the item. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: Local pickups are free and always welcome! We are happy to combine shipping on multiple items. Please contact us(803-684-2321) for combined shipping prices. Common ... morecarrier shipments: Items going common carrier are generally shipped the next business day following receipt of payment. Large items that require an LTL shipment generally go out the next business day following receipt of payment. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured- usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know. If we will be shipping to a business: The business name· The business' address· Contact information· If the receiver has a way to unload the pallet/ item or if we need to arrange for a lift gate. International shipping: We can ship outside of the U.S. Payment Details: We gladly accept PayPal. Certified funds, or cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy, and secure way to pay online. On large items we may request certified funds only.
|
|
|
CHEMINEER 1/3 HP PROCESS MIXER / AGITATOR 1725 RPM 230/460 VAC HAZARDOUS LOC
CHEMINEER 1/3 HP PROCESS MIXER/ AGITATOR SHAFT 21" LONG X 5/8" DIAMETER 1725 RPM 230/460 VAC MOTOR FRAME- HM565C 3 PHASE 60 Hz ID# P56X4071R-HR SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS Visit My eBay Store: Electrical Emporium BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS BLUE F-2 VINCE:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14951bdcae0-0x103-
|
|
|
Lightnin Mixers and Aerators Model 11 1/15 HP 2-Speed Industrial Mixer LOOK
Lightnin Mixers and Aerators model 11. 2-speed, 1/15 horsepower, industrial mixer. Unit has seen some use and shows some wear including a few minor dings and some missing paint, but works great. Please examine images carefully to verify the condition of your item prior to making a purchase and feel free to contact me if you have any questions. Please note that accessories mentioned in the pre-filled eBay information may or may not be included with this listing and you should assume that only what is pictured will be included in the sale. Quoted shipping is for locations within the continental United States only unless otherwise stated. Hawaii. Alaska, Puerto Rico, and international addresses may cost more. If your shipping address does not match that in eBay's records PLEASE WRITE A NOTE IN THE ORDER DETAILS so that we can be sure that ... moreyour order is properly delivered Satisfaction 100% Guaranteed! Thanks for looking! My Policies with regard to any auction I list: 1. All items are described to the best of my knowledge. If any item is not as I have described, please CONTACT ME directly at 303-956-0255. I am happy to help if I have made a mistake or have misrepresented something. All opinions I give in descriptions are MY opinions and I am not an expert on everything. That being said. If something is sold AS-IS, it is just that. I am honest and fair so please be the same to me. 2. Please leave positive 5 star feedback upon receipt. And then I will know you are happy. If you have ANY reason to not leave me 5 stars and positive feedback. Please CONTACT me and I will do my best to work out a solution for both of us. 3. I ship 2-3 times a week by FedEx ground for most items. Smaller items may go by USPS. If you have a special shipping request. I will try to honor it. Also, I reuse boxes and packing materials to keep costs down(and recycle) but if you want new materials I am happy to use such for an additional charge. 4. International buyers are responsible for all import dutie s and fees levied by their local gov
|
|
|
20 Hp STAINLESS STEEL HOMOGENIZER ROTOR STATOR MIXER 54 inch shaft
J. Little Mercer Co. Inc. Data for equipment B-3703 20 hp HOMOGENIZER MIXER Manufacturer(NO PLATE) Dimensions 54" shaft x 6" dia. rotor Construction/configuration stainless steel contacts. Vertical Motor 20 hp. 3500 rpm Electrical data 230/460volt. 48-24.4 amp, 3 ph Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry. No Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold ... moreas is. Item to be paid in full before shipping.
|
|
|
Lightnin / SPX Mixer Model: 782-Q-100, Year: 2012, HP: 100, RPM: 25, Ratio: 71.6
PM0616 Lightnin SPX Flow Technology Model No. 782-Q-100 Each item is guaranteed to be fully operational and in great condition unless otherwise noted. Was installed at a Georgia Pacific Facility for a few months before phase shutdown. Was under regular maintenance/service. It is stored inside. Only taken outside for pictures. Approximate Shipping Weight: 6.150.00 lbs Approximate Shipping Dimensions(LxWxH) 38.00" x 88.00" x 56.00" We do our best to represent the items we sell as honestly as possible. Including detailed pictures. We do our best to make sure our customers are completely satisfied. All items include a 30 day warranty. If you have any questions or need additional photos. Let us know and we will get back to you as soon as possible. Unit includes ONLY what pictured above unless otherwise noted. We have various freight ... moreaccounts. Or you can organize shipping yourself. We recommend UPS for international shipments. For additional info please click the"Shipping and payments" tab above. PM0616 Carport
|
|
|
Used 75-100 Gallon Baker Perkins Double Sigma Arm Blade Tilting Mixer 40 HP
Used 75-100 Gallon Baker Perkins Double Sigma Arm Blade Tilting Mixer w/ 40 HP 440v Motor USED STAINLESS STEEL DOUBLE ARM MIXER IN GOOD. WORKING CONDITION. ALTHOUGH BUILT IN 1946, IT HAS BEEN IN USE UNTIL VERY RECENTLY AND IS A TESTAMENT TO ITS DURABILITY. BELT DRIVEN. BOWL MEASURES 26" X 30" AND ABOUT 27" DEEP. WAS USED TO MIX NON-HAZARDOUS INGREDIENTS. ONCE CLEANED. YOU SHOULD NOT HAVE A CONCERN WITH RESIDUAL MATERIALS. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS, EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# NA OVERALL DIMENSIONS: WIDTH: 96" LENGTH: 108" HEIGHT: 54" ... moreAPPROX. SHIPPING WEIGHT: 12.500 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE
|
|
|
3/4 HP JG-4.0 MIXER 350 RPM CLAMP MOUNT
NEPTUNE MIXER CO. 3/4 HP JG-4.0 MIXER 350 RPM. CLAMP MOUNT REMOVED FROM A WORKING ENVIRONMENT SMB Machinery Systems- Parts Department SMB Machinery Systems LLC The Equipment Superstore Can't find what you are looking for? Contact us and we will check our vast inventory or contact our vendors to see if we can find what you need at a reasonable price! 15.000 Square Ft. Parts Department! Ebay Listing Section We have a vast inventory of new. Used and surplus parts including but not limited to: Motors Blowers Pumps Gearboxes Electrical Controls Chain and Belting Valves: Ammonia. Steam, Stainless Sprockets Stainless Steel Fittings Pnuematic and Hydraulic components Bearings And More! Red Richards Parts and Purchasing Manger Direct: 770-479-2698 Fax: 770-720-2011 7am-5pm EST
|
|
|
NEPTUNE 1/2 Hp Clamp Mount Direct Drive Pneumatic Batch Mixer
NEPTUNE 1/2 Hp Clamp Mount Direct Drive Pneumatic Batch Mixer 4" 3 Blade Prop. 32" x 5/8" Stainless Shaft. 1/4 Hp@ 1750 Rpm = 10 Cfm. 1/3 Hp@ 1750 Rpm = 12 Cfm. 1/2 Hp@ 1750 Rpm = 22 Cfm. 100 Psi Max. Model# BN-4.0. MSRP New: $800. This is a USED item in working condition. Appears to operate fine when tested. Includes muffler and air chuck. Shipping is FEDEX Ground Local pickup is welcome. Shipping Weight: 34 Lbs. Shipping Dimensions: 34” L 12” W x 12” H. Our pickup address is: INDUSTRY RECYCLES. 1200 Ogden Rd. Unit#4. Venice. Fl. 34285. NB/ 110514/ P28E/ 45425. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-149924b9b85-0x114-
|
|
|
Lightnin Mixer Model: 782-Q-100, Year: 2011, HP: 100, RPM: 25, Ratio: 71.6
PM0639 Lightnin Model No. 782-Q-100 Each item is guaranteed to be fully operational and in great condition unless otherwise noted. Was installed at a Georgia Pacific Facility for a year before phase shutdown. Was under regular maintenance/service. It is stored inside. Only taken outside for pictures. Approximate Shipping Weight: 6.150.00 lbs Approximate Shipping Dimensions(LxWxH) 38.00" x 88.00" x 56.00" We do our best to represent the items we sell as honestly as possible. Including detailed pictures. We do our best to make sure our customers are completely satisfied. All items include a 30 day warranty. If you have any questions or need additional photos. Let us know and we will get back to you as soon as possible. Unit includes ONLY what pictured above unless otherwise noted. We have various freight accounts. Or you can ... moreorganize shipping yourself. We recommend UPS for international shipments. For additional info please click the"Shipping and payments" tab above. PM0639 Carport
|
|
|
LIGHTNIN MIXER, 1/2 HP, V 230/460, MOTOR RPM 1725, 149405123483, USED
LIGHTNIN MIXER. MOTOR MODEL: 5K49HG2589. 1/2 HP. VOLTS 230/460. MOTOR RPM 1725. 149405123483. USED. APPROX SHIPPING WEIGHT: 65 LBS. SKID. TK. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
BRAWN IBC STAINLESS ELECTRIC LAB MIXING STAND & MDSS50-1200 3/4 HP MIXER
BRAWN IBC STAINLESS ELECTRIC LAB MIXING STAND& MDSS50-1200 3/4 HP MIXER You are bidding on a BRAWN IBC STAINLESS ELECTRIC LAB MIXING STAND& MDSS50-1200 3/4 HP MIXER. This item is from a large pharmaceutical company. We powered it up at the site to verify operation. The lift system is 110v and powered in the video. This is a NSF mixer. The motor is 3/4 hp and currently wired for 230v 3 phase but it is convertible to 460v 3 phase. The max motor height is 102" and the min is 60" If you have any questions at all feel free to ask. Below was copied off the web. Brawn's premium direct mixer leads the product series with design features that provide superior performance and long service life. This mixer is equipped with an all stainless steel motor and drive components. Popular process applications include pharmaceuticals. Food ... moreprocessing, cosmetics, chemicals and challenging environments where corrosive vapors destroy other mixers. Motors are TENV or TEFC and are wash-down duty. Mixers in this series range from 1/2 to 5 HP, with voltages of 115/230- single phase or 230/460- e phase. These BRAWN extra tough Stainless& Sanitary mixers stand up to aggressive chemicals or meet your sanitary mixing requirements in addition to utilizing Brawn's renowned, Mix& Match concept for parts interchangeability and unparalleled versatility. Brawn clamp mount stainless mixer stand. Brawn mixer MDSS50-1200. 50" inside front outriggers. 102" max height to bottom of motor. 60" minimum motor height. 230/460 v 3 phase currently wired for 230v Return Policy: Within 14 days after receiving this item and if you believe that we misrepresented it. Please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You SHIPPING: This item has a combined shipping weight of 488 pounds and will be shipped Common Carrier. Check with us for shipping options and p
|
|
|
LIGHTNIN XJ-30 MIXER, SN: 94/B87889, .30 HP, RPM 1725/1425, 43" SHAFT, USED
LIGHTNIN. MIXER. MIXER MODEL# XJ-30 SN: 94/B87889. MOTOR MODEL# E77R3026T-RW. TYPE: CS. 1 PHASE. 30 HP. RPM 1725/1425. 43" SHAFT. VOLTS 115/230. WORKS GOOD. USED. APPROX SHIPPING WEIGHT: 57 LBS. SKID. TK. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LIGHTNIN V5Q18 VEKTOR MIXER, SN: 97/G09522, PART# 271607, HP .25, RPM 1725, USED
LIGHTNIN MODEL# V5Q18 VEKTOR MIXER. SN: 97/G09522. PART# 271607. TYPE P. FRAME FB56YI. 3 PHASE. HP.25. RPM 1725. VOLTS 230/460. ID# B79Q0982N-TX. USED. APPROX SHIPPING WEIGHT: 53 LBS. SKID. TK. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-149cb02f7a5-0x106-
|
|
|
LIGHTNIN ND-4B MIXER, SN: 92/A78621, FR WX180TZ, HP 3 1/2, RPM 1725/1450, USED
LIGHTNIN MIXER. MODEL# ND-4B SN: 92/A78621. MOTOR MODEL# B77R0071M-WU. TYPE P. FRAME WX180TZ. HP 3 1/2. 3 PHASE. RPM 1725/1450. VOLTS 220/440. USED. APPROX SHIPPING WEIGHT: 118 LBS. SKID. TK. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LIGHTNIN DURA-MIX XJ-230 MIXER, SN: 93/B62461, 2.30 HP, RPM 1725/1425, USED
LIGHTNIN DURA-MIX MIXER. MODEL# XJ-230 SN: 93/B62461. MOTOR MODEL# B77R3041N-UU. TYPE: P. 3 PHASE. 2.30 HP. RPM 1725/1425. VOLTS 208-220/440. P/N: 127640. USED. APPROX SHIPPING WEIGHT: 119 LBS. SKID. TK. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Used Prochem Mixer 74SFIT40 40 HP Input RPM: 1750 Output RPM: 63
Used Prochem Mixer 74SFIT40 40 HP Input RPM: 1750 Output RPM: 63 Used Prochem Mixer 74SFIT40 40 HP Input RPM: 1750 Output RPM: 63 60 Day Guarantee FOB Hamilton. Ohio 45011 International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. T hese charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional charges will be prior to bidding or buying. Location- PRIMSA KLL Shipping Payment Return Terms About us If you need same day shipping- CALL 513-349-4119. We understand that sometimes urgent deliveries are needed and normal parcel services wont do. Almost all other parcel shipments are shipped within 24 hours of received payment. If you need a freight quote please contact us at the number above. All products are professionally ... morepackaged or crated for safe delivery! Payment is expected upon checkout completion. IF you need more time to make a payment. Please contact us. If payment is not received within 7 Days we must begin an Unpaid Item Dispute. All return policies details are covered in each listing. Please contact us if you receive an item that does not function correctly or is not described properly. Designed by ANITemplates
|
|
|
MixMor G-34, 3/4 HP Mixer, 12in Impellor, 7/8x45in SS Shaft, Similar to Lightnin
For sale is one used MixMor mixer. 3/4 hp motor. 1725 rpm; 64in over all length; output rpm 420; serial number 41398-2. Please note in the photos there is rust and corrosion on the unit. If you need more information please ask. Wt. 95lbs plus pallet.
|
|
|
Brawn 1/3 HP Mixer (MX2142)
Inventory# MX2142 Manufacturer: Brawn Model# SG33 HP: 33 RPM: 1725 Drive: Gear Clamp: Yes Serial# 40051 Volts: 115/208-230
|
|
|
Dough mixer, Horizontal roller bar, 20 hp, Size 3B 600 LB, Tilt, Ajax, Champion
Used horizontal roller bar dough mixer. We powered up the mixer and it worked well with no unusual noises(see video below) The powered bowl lifts and lowers and the two-speed main drive motor sounds good. We pressurized the jacketed bowl and it appears to have a leak somewhere. This is an running older machine that could be used the way it sits or it could be refurbished to meet higher cosmetic standards. Triple roller bar, Size 3B, Powered tilt, 20 HP drive motor, Low and High speeds, Bowl dimensions: 39W x 34.5 deep x 40 H, Overall dimensions: 90W x 41deep x 73 H, Specifications: MFG: Champion, Model: Ajax 3b, Serial: M.1117, Volts: 208, Amps: Phase: Drive: Controls: Manuals: Air: Weight: Lbs, Condition: Used. Working fair, Length: 90 Width: 41, Height: 73, All dims inches unless otherwise noted, Inventory# 5288 For more information call ... more610-286-1655. Please call or email for shipping rates. International purchases: A $40 documentation processing fee will be added to total purchase for items under $150. When communicating with us please use your own email address or call 610-286-1655. We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system. Send emails to heritageequipment AT gmail.com The new ebay buyer protection program has inspired us to offer all of our items“as-is” This does not mean that you are buying a machine with deficiencies. Known or unknown. What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine. In addition to this written description you will have the opportunity to view high quality photos of the item. With these two sources of information you will have as much information as possible without being physically here to inspect the machine. Feel assured that we will make a diligent effort to give you an accurate description of the equipment. As a buyer
|
|
|
Lightnin Mixer Motor and Prop 1.5 HP Lightning
Very good condition Lightnin mixer and motor. 1.5 HP. DC Motor. Inverter ready. Variable speed. Classified for use in hazardous environment Class C Group D. 17.5" long shaft with 9" diameter boat style prop is included. Comes with over the side adjustable clamp for clamping to a vessel. A heavy mixer, motor, mount and gearbox combination, about 140 pounds. Buyer pays for freight shipping from 14850.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14a1c1cd052-0x104-
|
|
|
Lightnin Mixer 73-Q-3 w 3 HP Motor Gear Drive Ratio 31.4 73Q3 Lightning 3HP
PM0658 Lightnin Mixer Catalog# 73-Q-3 Includes U.S. Electrical Motors 3 HP Motor Each item is guaranteed to be fully operational and in great condition unless otherwise noted. Excellent condition and under regular maintenance/service at a Georgia Pacific Facility until phase shutdown. It is stored inside. Only taken outside for pictures. Model: 73-Q-3 Drive Ratio: 31.4 Approximate Shipping Weight: 800.00 lbs Approximate Shipping Dimensions(LxWxH) 48.00" x 40.00" x 32.00" We do our best to represent the items we sell as honestly as possible. Including detailed pictures. We do our best to make sure our customers are completely satisfied. All items include a 30 day warranty. If you have any questions or need additional photos. Let us know and we will respond as quickly as possible. Unit includes ONLY what pictured above unless ... moreotherwise noted. We have various freight accounts. Or you can organize shipping yourself. We recommend UPS for international shipments. For additional info please click the"Shipping and payments" tab above. PM0658 B 16B 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14a3d479c5c-0x111-
|
|
|
LIGHTNIN N33G-200 MIXER 2 HP 1725 RPM S # 82/153272
Lightnin Mixer Model- N33G-200 Serial# 82/153272 Motor- 2 HP 3/60/230-460 1200 RPM
|
|
|
USED 1/4 HP LIGHTNIN MIXER - MODEL NC-4
Clamp-on Lightnin portable mixer Model NC-4. 1/4HP drive, 1725RPM, 115/220V, 4.0/2.0Amps, 1 HP Motor. Adjustable clamp for mounting, 1/2" dia X 26" long drive shaft with twin mixing blades. Commercial grade unit.
|
|
|
Mixer Philadelphia Gear 25 HP Model HVS-25 Serial # 35037-1 Silver Streak
25 HP Mixer. MFR: Philadelphia Gear. Model: HVS-25. Silver Streak. Shaft Length: 23" Rotation: Counter Clockwise. Flange Mount. 3 Blade. 22" prop
|
|
|
Dayton Laboratory Drum Lab Mixer, 1/20 HP, Stainless Steel 32V142
Item- Laboratory Mixer Brand- Dayton Model- 32V142 Type- Economy Max. RPM- 1700 Shaft Dia. In. 5/16 Shaft Length(In. 30 HP- 1/20 Motor- 115V 1-Phase Motor Type- TEFC Electric Mounting Brackets- Adjustable Propeller- 3 Blade Shaft Material- 316 Stainless Steel Includes- Cast Iron Clamp New Unit. Open Box. Shaft very slightly bent. Stock 121614R:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14a64840334-0x104-
|
|
|
Lightnin XJQ-117 Gear Drive Mixer/Aerator .65 HP 230/460V 3Ph 1740 RPM W/O Shaft
574-825-4990 SKU: 58543 Lightnin XJQ-117 Gear Drive Mixer/Aerator.65 HP 230/460V 3Ph 1740 RPM W/O Shaft. Brand: Lightnin Size: Length: 12 in. Width: 12 in. Height: 25 in. Condition: Used Model: XJQ-117 Fixed Mount Country of Manufacture: Unknown Consigner: G Items in Lot: 1 Lister: 6 Weight(lbs. Oz) 56.0 Includes Upper Half Of Drive Coupling. Removed From A Working Environment. Tested& Runs As It Should. CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.com Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If ... morethere is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company Check, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Please call us at 574
|
|
|
LIGHTNIN HP-25-V MIXER 0.25 KW, 460 VOLT (USED)
SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, AND READ THE IMPORTANT INFORMATION ABOUT DESCRIPTION(BELOW) PLEASE CHECK OUT OUR SALE ITEMS IN OUR STORE! LIGHTNIN MIXER MODEL: HP-25-V 0.25 KW 460 VOLT USED APPROXIMATE SHIPPING WEIGHT 25 LBS JP IF YOU HAVE ANY QUESTIONS PLEASE CALL US AT 731-635-3167 Please understand that our items are surplus. They come here from factories that have been closed or from other similar situations. Therefore. We do not have first hand knowledge of their history. We do not have the equipment to test many of these items, therefore, we do not know if they are in perfect working condition. We try to be as accurate as possible with our listings. But we are not experts and many of our items are things we know nothing about. There is no eBay condition description for surplus items, so please do not rely ... moresolely on the standardized condition description from eBay. We use our best judgment on the condition, and include lots of pictures. Please look closely at the pictures. And contact us with any questions or to ask for more detailed pictures if needed before making your decision to purchase. We have no desire to misrepresent. We do honor our 7 day return policy. If you should get an item that does not work. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WE APPRECIATE YOUR BUSINESS. AND WISH TO MEET YOUR NEEDS. ALL PAYMENTS ARE TO BE MADE WITHIN 5 DAYS. IF YOU PURCHASED AN ITEM THAT REQUIRES FREIGHT SHIPPING. SHIPPING ARRANGEMENTS ARE TO ALSO BE MADE WITHIN 5 DAYS. COMBINED SHIPPING IS ALWAYS AVAILABLE. AND THANK YOU FOR SHOPPING WITH US! Powered by The free listing tool. List your items fast and easy and manage your active items. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14aa5d91157-0x115-
|
|
|
Arrow Model 350, 1/15 HP Mixer Motor, 7 to 1 Ratio, 350 RPM Max, No Impeller
This listing is for an Arrow Model 350. 1/15 HP Mixer Motor, 7 to 1 Ratio, 350 RPM Max, No Impeller This includes the following: Arrow Model 350. 1/15 HP Mixer Motor, 7 to 1 Ratio, 350 RPM Max, No Impeller Description: This is an Arrow Model 350. 1/15 HP Mixer Motor, 7 to 1 Ratio, 350 RPM Max, No Impeller or stand included in excellent conditon. Model 350 Features Horse power: 1/15 Batch size water: 50 liter Description: Heavy Duty Gear ratio: 7 to 1 Max. rpm: 350 Torque: 14.5 in-lbs Power: 120 VAC 60 Hz Consumption amp: 1.1(110 watts) Motor shaft dia. 3/8" Motor dimensions: dimensional drawing of stirrers available upon request Weight: Constant Torque 9 lbs(4.1 kg) 192 in-oz. or 16 in-lbs. Price Each: $725.00(From Arrow) Documentation: Free Shipping in the lower 48 Import duties. Taxes and charges are not included in the item price ... moreor shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. This ships free in the USA. If you receive your item and it is not to your 100 Percent Satisfaction. Please contact us before leaving feedback. I strive to make sure every transaction is a positive one! I wanted to reach out and let you know that eBay is changing the way Sellers are rated. I am not overjoyed with what's happening. But I have to roll with it. IF you have a problem with my item, I would like you to use the"Contact Seller" link in the listing, or call me. Please don't open a case. Cases count against me even if they are resolved. I stand behind my items and will work out any problems that you may have with an item. So please contact me if you have a
|
|
|
Robbins/Myers Prochem 20MD1S Mixer 1750 RPM Output 510 RPM 5 HP w/GE Motor
Normal 0 false false false EN-US JA X-NONE PAYMENT We accept payments through PayPal. SHIPPING All shipments go out on Monday. We try to ship as frequently as we can. Payment must be received by 5:00 PM EST on Friday for your shipment to go out on Monday. If your item weighs 75 LBS or more. It must be shipped motor freight. For Freight shipments, payment must be received by 7:00 AM EST Friday morning if going to be shipped on Monday to allow time to schedule a truck for pick up. BUYER PAYS SHIPPING COSTS. RETURNS ARE ACCEPTED If you have an issue or have questions. Please contact us by email or phone. sales@surplussalesusa.com(704) 798.5063 If you are satisfied with your purchase and our service please leave Positive Feedback. Thank You for Your Business!
|
|
|
2 HP. Jkt. Sigma Blade Mixer C.S. Construction With Manual Tilt Item # 8557
2 HP. Jacketed Sigma Blade Mixer Carbon Steel Construction- P& K Equipment. Inc. fax: 216-831-7779 2 HP. Jacketed Sigma Blade Mixer Carbon Steel Construction
|
|
|
1.17 hp clamp mount mixer Lightnin 230/460v speed control ss shaft and prop
J. Little Mercer Co. Inc. Stock No. B-3788 Lightnin 1.17 Hp clamp mount mixer w/speed control Model XD117AM. Direct drive 1.17 Hp. 1740 rpm, 230/460v, 3ph Will include a stainless steel shaft and prop We have 2 others without speed controls for $300 less. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid ... morein full before shipping.
|
|
|
1/2 hp clamp mount mixer w/ STAINLESS prop + shaft Philadelphia 115-208/230v
J. Little Mercer Co. Inc. Stock Number: B-3687 Phildelphia clamp mount mixer model PG-12 1/2 Hp. 1200 rpm, 115-208/230v, single phase 5.0 ratio. 240 rpm shaft speed Currently with 3/4 x 29 inch ss shaft& 9 inch prop We can customize the shaft to your application Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item ... moreto be paid in full before shipping.
|
|
|
Neptune Mixer Co. 1/2 HP Mixer (MX2144)
Inventory# MX2144 Manufacturer: Neptune Mixer Company Model# PM-1/2 HP: 5 RPM: 1725 Shaft Size: 5/8" x 32" Prop: 3 Blade Drive: Direct Clamp: No Serial# P110738 Volts: 208-230/460
|
|
|
SPX/Lightnin XSS1P50 0.5 HP Agitator Mixer
One(1) Used SPX/Lightnin XSS1P50 0.5 HP Agitator Mixer Qty: 1* Note extra charge will be on rigging and loading for $75.00
|
|
|
Neptune Mixer 1/3 HP Mixer (MX2145)
Inventory# MX2145 Manufacturer: Neptune Mixer Model# JF2.1 HP: 333 RPM: 1725 Shaft Size: 3/4" x 48" Prop: 3 Blade Drive: Gear Clamp: Yes Serial# 90043 Volts: 230/460
|
|
|
LIGHTNIN MIXER, MODEL# 71052, RATIO 2.1-1, 2 HP, 1160 RPM, SIEMENS MOTOR, USED
LIGHTNIN MIXER MODEL# 71052 RATIO 2.1-1 2 HP 1160 RPM 230/YY460 VOLTS SIEMENS MOTOR USED APPROX. SHIPPING WEIGHT 365 LBS ON SKID(44 X 50 X 20) SKID TK INTERNATIONAL BUYER-PLEASE NOTE: BUYER IS RESPONSIBLE FOR ARRANGING ALL INTERNATIONAL FREIGHT. INCLUDING ALL PAPERWORK AND INSURANCE FOR ITEMS PURCHASED. IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lightnin Mixer B77R3045R-VW 0.3 HP Motor Complete With 5' Shaft & Dual Mix Blade
0.3HP. Motor 1700/1450 rpm for 60/50Hz, Post gear. Approx 200 rpm 5' Shaft Stainless steel. 2 Blades on shaft. 3-phase. Can operate with switch or a VFD to control speed. Clamp Mount. In good working condition. Will ship in two boxes. One for shaft, one main body.
|
|
|
LIGHTNIN MIXER, MODEL: KJ-30??, SN: 85/252373/02, RPM 1725, .30 HP, USED
LIGHTNIN MIXER MODEL: KJ-30? SN: 85/252373/02 MOTOR MODEL: B77R3045S-CC RPM 1725.30 HP 3 PHASE VOLTS 208-220/440 USED APPROX. SHIPPING WEIGHT 45 LBS(21 X 11 X 11) U-G-4 TK INTERNATIONAL BUYER-PLEASE NOTE: BUYER IS RESPONSIBLE FOR ARRANGING ALL INTERNATIONAL FREIGHT. INCLUDING ALL PAPERWORK AND INSURANCE FOR ITEMS PURCHASED. IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LIGHTNIN MIXER HEAD ND-2A 3/4 HP 115/230V MOTOR RPM 1725, USED
Lightnin ND-2A 115/230 volt single phase 3/4 HP mixer motor with tank clamp. For 3/4" shaft, Runs. No mixer paddle. Posted with
|
|
|
.5 hp clamp mount mixer 1 ph 115v input EASTERN stainless steel shaft and prop
J. Little Mercer Co. Inc. B-3748.5 hp CLAMP MOUNT single phase MIXER Model/serial no. no plate but similar to model RG-HEAD Manufacturer EASTERN Motor 1750 rpm. 1/2 Hp, 90v dc motor Drive gear reduced w/SECO AC Drive Electrical data 1 ph. 115v input Will include a stainless steel shaft and prop up to 4 foot in length several available Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any ... moretime that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
|
1 hp CLAMP Mount VARI SPEED MIXER stainless steel shaft prop 90 v 1 ph 10 amp
J. Little Mercer Co. Inc. B-3767 1 hp CLAMP Mount VARI-SPEED MIXER Model/serial no. RG-5. S/n 669 Manufacturer EASTERN Construction/configuration steel General data variable speed, Motor 1750 rpm. 1 hp Drive gear reduced Electrical data 90 v. 1 ph, 10 amp Will include a stainless steel shaft and prop up to 4 foot in length several available Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction ... moreat any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
|
.5 hp clamp mount mixer 90vdc motor 115v input NEPTUNE single phase gear reduced
J. Little Mercer Co. Inc. B-3768.5 hp CLAMP MOUNT single phase MIXER Model/serial no. d-1.7 s/n 117713 Manufacturer NEPTUNE MIXER DIV.OF R.A.INDUSTRIES INC. Motor.5 hp. 1750 rpm Drive gear reduced Electrical data 90vdc motor. 115v input Will include a stainless steel shaft and prop up to 4 foot in length several available Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that ... moredoes not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
|
25 Hp Pro Quip mixer TH-15 Vertical Drive Agitator process chem
This is a top entering agitator. It is a 2007 model and has been very well looked after. This unit was purchased right before a plant shutdown and has been sitting in the back for quite some time. I am overseeing the liquidation and I have not been around this equipment on a daily basis. If you have any questions please feel free to contact me anytime and I will get you answers. Thank you very much for your interest.
|
|
|
.5 hp air mixer Eclipse series 77 air powered tri clamp mount
J. Little Mercer Co. Inc. B-3820.5 hp tri clamp AIR MIXER Model/serial no. series 77 air mixer. 9-4300- 7a Manufacturer Eclipse Construction/configuration stainless contact + tri-clamp mount Inlets/outlets(2) 25" air i/o Motor 1/2 hp rated THIS CAN BE SHIPPED VIA UPS OR FEDEX GROUND Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. ... moreSold as is. Item to be paid in full before shipping.
|
|
|
2 hp tri clamp mount AIR POWERED MIXER
J. Little Mercer Co. Inc. B-3825 2 hp-triclamp AIR MIXER Model/serial no. series 77 air mixer. 9-4300- 20 Manufacturer Eclipse Construction/configuration stainless contact tri-clamp mount Inlets/outlets(2) 5" air i/o General data 6" tri clamp base Motor 2 hp approx. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold ... moreas is. Item to be paid in full before shipping.
|
|
|
3 HP Chemineer Gear Reduced Mixer S.S 60" Shaft Item #8428
3 HP Chemineer Mixer UL Rated With 60" Stainless Steel Shaft- P& K Equipment. Inc. fax: 216-831-7779 3 HP Chemineer Mixer UL Rated With 60" Stainless Steel Shaft
|
|
|
Heavy duty 25 Gal, 5 HP Littleford Day Hobart Mixer Blender 100 QT
HEAVY DUTY Littleford Day Pony Mixer(Similar to the Hobart Mixers) Used JH Day Pony Mixer 25 gallon/ 100 Quart. 5HP main motor, dual motion, planetary, vertical pony mixer. Includes Stainless Steel Mixing Tank and Rotary Base. Has a 1/4 HP motorized adjustable height mixing head with a Stearn Brake to RAISE the Mixing Paddles. To easily remove the mixing tank. This makes it easy to remove the bowl. Equipped with a 26" Diameter x 18" Deep stainless steel mixing bowl. Total Dimensions: 66"H x 57"W x 36"W Weight: 2650 Lbs. Shipped strapped to pallet and shrinked wrapped. Specs: 3 ph. 208 Volts, Frame 254 RM, 12.5- 13.8 Amps, 60 Hz, Shaft Speed 48-96 RPM. Condition: USED. Tested, See Video Location: Store Shelve Description This unit was pulled from an existing process line that was functional at the time of removal. ... moreWalk in welcomed. Open 5 day's a week. Monday thru Friday.9:00 to 5:00. Come and inspect the unit in person. Please take a look at all of the provided photos and video before placing your bid to thoroughly inspect the lot contents and condition. Item Condition: Used tested. We did plug it in and it powers on fine. The paddles turn. The controls all work. Unless otherwis e stated. See Video for actual testing and results Return Policy: We are offering the buyer a( 7 day) right of return for testing and inspection. Shipping Info: Shipping weight is 2650 lbs. Shipped from(zip 00612) Dimensions: 66" X 57" X 36" Default Shipping Service: Marine Freight Line B uyer will be responsible for the cost shipping. Local residents will be charged 7.00% sales tax. All Marine Shipping is via Magic Transport. The have depots through out the US. Jacksonville. Fl, Atlanta, Chicago, New Jersey etc. Their number is 787-780-4020. Contact name is Katia. We accept the following methods of payment: Corporate check. Must Clear. Wire Transfer, or cash upon pickup. We reserve the right to refuse other payment types at our discretion. We make our decision on a case by case basis. Due to pr
|
|
|
Lightnin B77R0070-ZX/XJ-174 1.74 HP Mixer (MX2041)
Inventory# MX2041 Manufacturer: Lightnin Model# B77R0070-ZX/XJ-174 HP: 1.74 RPM: 1725 Shaft Size: 13/16" OD x 50"L Prop: 3 Blade Drive: Gear Clamp: Bolt on Volts: 208-220/440 Location: M15D. M16D. All items ship FOB Grand Rapids. MI, and buyer is responsible for shipping charges. For items unable to ship UPS, we can provide a shipping quote or give you weight and dimensions to ship via your own carrier. To receive a shipping quote, please let us know whether we will be shipping to a business or residence, and if you have access to a loading dock and/or forklift. For questions regarding shipping and handling, please contact Lanco Corporation at 616-887-8300 or toll free at 888-248-8500. Thank you.
|
|
|
LIGHTNIN ND-3A ND3A B76P4557M-VH 1HP 1 HP 230/460V 1725 RPM MIXER W/ PROPELLER
LIGHTNIN MIXER MODEL: ND-3A IDENT. B76P4557M-VH PH: 3 HP: 1 HZ: 60 RPM: 1725 VOLTS: 230/460 APPROXIMATE PROPELLER SHAFT LENGTH: 58" APPROXIMATE PROPELLER SHAFT DIAMETER: 5/8" APPROXIMATE PROPELLER BLADE DIAMETER: 9" PLEASE NOTICE THAT ITEM HAS SOME SCUFFS. SCRATCHES, ETC. FROM LONG TIME STORAGE ON SUPPLY ROOM SHELF. FOR ADDITIONAL INFORMATION ON ITEM PLEASE SEE THE ABOVE PHOTOS. PLEASE NOTICE THAT ITEM WILL NEED TO SHIP IN TWO DIFFERENT PACKAGES. Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in good working condition. USED. But in good working condition. Removed from closed plant. REBUILT. UNUSED SINCE DETAILS: PLEASE NOTICE THAT ITEM HAS SOME SCUFFING. SCRATCHING, ETC. FROM LONG TIME STORAGE ON SUPPLY ROOM SHELF. FOR ADDITIONAL INFORMATION ON ITEM PLEASE SEE THE ABOVE PHOTOS. ITEM WILL BE SHIPPED IN TWO ... moreSEPARATE PACKAGES DUE TO SIZE. PLEASE NOTICE WE ARE ONLY SELLING WHAT IS PICTURED. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS. PLEASE CONTACT US AT 803.222.0460 FOR COMBINED SHIPPING PRICES. COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as
|
|
|
IKA 300 Liter Vacuum / Pressure Vessel 20 HP Homo Mixer ( Admix )
IKA 300 L vacuum/ pressure tank with 20 HP Ultraturrax Homo Mixe" Atlantic Equipment Inc. Serving Light. Medium& Heavy Industry(845 807 8727) Slow speed paddle type mixer. Hydraulic tilt out mechanism with self contained hydraulic supply. Equipment offered FOB North Brunswick NJ 08902 Subject to prior sale! Export Welcome! We can load suitable truck or trailor. Skidding. Crating or Container loading available for an addtional fee. Package Deals or Offers may be considered! We do our best to photograph and describe accuratly Contact(845) 807-8727 with any questions. Thank you for looking& good luck if you are bidding! Pat dolan
|
|
|
ANCO 10 Hp INDUSTRIAL MIXER w RADIAL DISC IMPELLER 4 LIQUIDS/MATERIAL
ANCO 10 Hp INDUSTRIAL MIXER w RADIAL DISC IMPELLER MODEL-170AC 68 SERIAL-B120 IMPELLER-38B-34 HP-10 VOLTS-240/460 PHASE-3 THIS IS A NICE INDUSTRIAL MIXER WITH A RADIAL DISC IMPELLER WITH 6 VERTICAL BLADES. UNIT HAS BEEN FULLY CHECKED AND IS IN GOOD WORKING CONDITION. THE STAINLESS STEEL SHAFT IS 14' IN LENGTH. I WAS NOT ABLE TO GET TOO MUCH INFO ON THIS MODEL. BUT COMES AS PICTURED AND GAURANTEED TO BE IN GOOD WORKING CONDITION. I DID FIND THIS INFO BELOW ON ANCO RADIAL DISC IMPELLERS. Radial Disc Impeller This impeller uses four. Six or eight vertical blades attached to a horizontal disc. The impeller pumps out in a radial direction and generates a recirculating mixing pattern above and below the disc. This type of design is stable under varying liquid depths. This high shear, high power design is an excellent choice as a rapid mixer ... morein shallow basins, solids suspensions in shallow or varying water depths, and is often used as the lower impeller in a multiple impeller design. THIS UNIT IS A BUYER TO PAY EXACT FREIGHT AUCTION.WE WILL PROBABLY SEND THE MOTOR LTL AND FIGURE SEND THE IMPELLER ON A SEMI.EMAIL ME FOR RATES! ALL emails received after 5pm MST will be answered the next business day. Therefore after 5pm on friday will be answered monday morning. No auctions will close on the weekends, but if you would like an answer about an auction please email us ahead of time.Thanks! Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. Most of the items sold on this page are surplus items from government auctions or bankruptcy sales. If the description does not say"New" then you are to assume it is a preowned item. We try to power up every item. But much of the time do not have the means to test items, therefore unless otherwise stated items are sold"as-is" You are welcome to email any questions and if we have the capability to answer we will. We are an ebay business and are committed to excellence in
|
|
 |