|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$299.00 Shipping Condition: New Location: Rancho Cucamonga, United States 75kg/165Lbs SS Feed Mixer Granular Plastic Mixer. Start the blender first, then pour into it, do not put your hands and sundry things in the bucket when ... moreworking. Be sure to block the outlet with a baffle when stirring.
$201.13 Shipping Condition: Used Location: Shasta Lake, United States Used Mix Mor Model "G-11" Gear Drive Portable Mixer. Has Aluminum alloy gear housing with Accumix Variable Speed Control, Model # MM23401A. Control can ... morebe wired for 120/240 V AC, 60 Hz. Has 1 Hp. DC Permanent magnet motor, Dayton # 4Z378C, TEFC, 1750 RPM, 180 V DC, 5 Amps full load. Unit comes with manual, This mixer DOES NOT have the prop shaft, mixing prop or mounting clamps. Unit RUNS and in good condition. No longer needed, Thanks for looking.
Buy It Now
$60.00 Shipping Condition: New Location: Southbridge, United States
Buy It Now
$50.30 Shipping Condition: New – Open box Location: Cumberland, United States Qty 1 - Millipore GM5/ 4B21-6420, GMP500 Drive Unit, Nord SK 71L/2CUSTF electric motor. Liquidation priced, very cheap!
Buy It Now
$160.79 Shipping Condition: Used Location: Albion, United States Mixer Model: 33GD. ALSOP Variable Speed Industrial Gear Drive Mixer. Mixer S/N: 1435-M. Mixer Drive Type: Gear.
Buy It Now
$167.34 Shipping Condition: Used Location: Albion, United States IPTS Variable Speed Industrial Mixer. Mixer Model: RPQ1. Horsepower: 1/3hp (Baldor Industrial Motor).
Buy It Now
Condition: Used Location: Sun Valley, United States The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best ... moreof our ability.
Buy It Now
Free Shipping Condition: For parts or not working Location: Cookeville, United States Milwaukee 2810-20 M18 FUEL Mud Mixer with 180° Handle | FOR PARTS
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Power type: Pneumatic Mixing capacity: 5Gallon Mixing propeller rod: φ15mm stainless steel Mixing propeller:φ100mm Mixing propeller vane: ... moreStainless steel Horsepower: 1/2HP Include: 1* Pneumatic Mixer Machine Feature： This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. It come with stand and shafts with the mixing propellers shown. The height of the stand can be adjusted. It need to work with an air compressor. It is used for paint mix in paint factory. It is also used for mixing many kinds of coating material. It is also used for homogeneity, dispersing in domestic industry, food industry, etc. It is safe to use without spark and anti-explosive. The air valve switch can be used to adjust the height automatically.
Buy It Now
$1870.49 Shipping Condition: Used Location: Ireland
Buy It Now
Free Shipping Condition: New Location: Chino, United States 5 Gallon Pneumatic Mixer Stand Tank Barrel Paint Mix Blender Stainless Steel New Features: This Pneumatic Mixer Is in Good Working Condition. It Is Used ... morefor Mixing Paint, Dope, Etc. It Come with Stand and Shafts with the Mixing Propellers Shown. The Height of the Stand Can Be Adjusted. It Need to Work with an Air Compressor. It Is Used for Paint Mix in Paint Factory. It Is Also Used for Mixing Many Kinds of Coating Material. It Is Also Used for Homogeneity, Dispersing in Domestic Industry, Food Industry, Etc. It Is Safe to Use Without Spark and Anti-explosive. The Air Valve Switch Can Be Used to Adjust the Height Automatically. Specifications: Power Type: Pneumatic Mixing Capacity: 5Gallon Mixing Propeller Rod: φ15mm stainless steel Mixing Propeller:φ100mm Mixing Pro.
Buy It Now
Free Shipping Condition: New Location: Princeton, United States With the M18 REDLITHIUM™ battery the user can mix up to 15, five gallon buckets on one 5.0Ah battery. The 180° adjustable handle is designed to allow ... moreevery user to optimize the handle position for their comfort.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Power type: Pneumatic Mixing capacity: 5Gallon Mixing propeller rod: φ15mm stainless steel Mixing propeller:φ100mm Mixing propeller vane: ... moreStainless steel Horsepower: 1/2HP Include: 1* Pneumatic Mixer Machine Feature： This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. It come with stand and shafts with the mixing propellers shown. The height of the stand can be adjusted. It need to work with an air compressor. It is used for paint mix in paint factory. It is also used for mixing many kinds of coating material. It is also used for homogeneity, dispersing in domestic industry, food industry, etc. It is safe to use without spark and anti-explosive. The air valve switch can be used to adjust the height automatically.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Are you still struggling to stir the raw material manually?. Are you still bothered by the poor performance of electric paint mixers?. Its 1/2 HP power ... moreand maximum 2000 rpm will greatly improve the mixing efficiency.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Power type: Pneumatic Mixing capacity: 5Gallon Mixing propeller rod: φ15mm stainless steel Mixing propeller:φ100mm Mixing propeller vane: ... moreStainless steel Horsepower: 1/2HP Include: 1* Pneumatic Mixer Machine Feature： This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. It come with stand and shafts with the mixing propellers shown. The height of the stand can be adjusted. It need to work with an air compressor. It is used for paint mix in paint factory. It is also used for mixing many kinds of coating material. It is also used for homogeneity, dispersing in domestic industry, food industry, etc. It is safe to use without spark and anti-explosive. The air valve switch can be used to adjust the height automatically.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Application It is widely used in aerospace manufacturing, shipbuilding, home appliances, coating, the food industry, medical treatment, paint, ink, printing ... moreand dyeing, cosmetics, synthetic leather, leather, tires, ceramics, ball manufacturing, and other industries. It is suitable for paint stirring in the spraying process, and also for stirring various coatings. Specification Color: Silver Blade Material: Stainless Steel Working Pressure: 1-3kg/ 2.20-6.61lb Power: 1/2HP Speed: 50-2000 rpm Stirring Capacity: 190L/50gal Blade Diameter: 15cm/ 5.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States 220V 150kg Industrial Blender Mixer Vertical Color Mixer. 331LB(150kg). The vertical color mixing machine adopts the vertical blade vortex type low-speed ... moreor high-speed operation, which makes the raw materials roll at high speed and collide with friction to generate heat, so that the material can be mixed with water and the water can be quickly evaporated to achieve the purpose of drying; it can also be used for mixing wet materials.
Buy It Now
$399.00 Shipping Condition: New Location: Rancho Cucamonga, United States The machine features an inner mixing blade with an auger screw for mixing granular objects, ensuring high efficiency and uniformity with the ability to ... morestart with just one button for safety and speed.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: ... more1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in.
Buy It Now
Condition: Used Location: Pedricktown, United States VMI Phebus 2000 Fork Dough Mixer. Video of unit running available. Previously used in sanitary application, bakery.
Buy It Now
$21.10 Shipping Condition: Used Location: Trilla, United States This LIGHTNIN ARL COMPRESSED AIR MIXER is a powerful and efficient tool for mixing in various industrial settings. With a pneumatic mixer, you can easily ... moreand quickly mix materials without the need for electricity or manual labor.
Buy It Now
Condition: Used Location: Trenton, United States Click To Enlarge- Used- Farrel Banbury Mixer. Model F80. Approximate 80 liter, 21 gallon, 116 pound working capacity. Chrome plated chamber, carbon steel ... morejacketed, drop door design. Wing style cored rotors, approximately 30-105 RPM. 10-1/2" x 24" feed opening with ram feeder. Driven by a 400 HP, 500 Volt, 1150/2300 RPM DC motor thru a Farrel gearbox, drive ratio 11.652:1. Includes a Farrel 2 HP hydraulic power pack, 2) Viking pumps, 1) modular force feed lubricator, Lubriquip Sentinel lube system, 440 Kva transformer, control panel and a Reliance Maxpak Plus VS drive panel. ref# 89079 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Buy It Now
Condition: Used Location: Morgantown, United States This is a used Semco 1378 pneumatic mixers. MFG: Semco. Model: 1378. The machine has a pneumatic cylinder in the upper portion which lowers that piston ... moreand a cylinder in the lower portion that raises the platen.
Buy It Now
Condition: Used Location: Las Vegas, United States This lot is for oneMTI MSK-SFM-16 Dual-Shaft Planetary Vacuum Mixer. It has a built-in pump for removing any gas bubbles, which can vacuum the mixing ... morecontainer to -0.08 MPa. It is a high-quality mixer tool for preparing battery electrode paste and various ceramic materials in a research lab.
Buy It Now
$125.00 Shipping Condition: New – Open box Location: Sun Valley, United States The unit is new from old inventory. If the item is listed as working, then it was tested to the best of our ability.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States 220V Industrial Blender Mixer Vertical Color Mixer. Blender Mixer 1. Phase number: Three phase. The vertical color mixing machine adopts the vertical ... moreblade vortex type low-speed or high-speed operation, which makes the raw materials roll at high speed and collide with friction to generate heat, so that the material can be mixed with water and the water can be quickly evaporated to achieve the purpose of drying; it can also be used for mixing wet materials.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States
Buy It Now
Free Shipping Condition: Used Location: Saint Louis, United States You are purchasing a Baldor Dynamix 7305J Agitator. This has been tested and working. Good used condition.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States The mixer can be easily mounted, and the shaft angle can be easily adjusted for optimum mixing. The mixer can be conveniently moved from one container ... moreto another, and mounted directly to tanks or on railers with 1-7/8" opening adjustable clamp.
Buy It Now
Free Shipping Condition: New – Open box Location: Tampa, United States Hopper loading : 150kg, 330lbs. Start the blender first, then pour into it, do not put your hands and sundry things in the bucket when working. 150kg/330Lbs ... moreFeed Mixer Stainless Steel Hopper. 150kg/330Lbs SS Feed Mixer Granular Plastic Mixer --- 021527.
Buy It Now
Condition: Used Location: Pedricktown, United States Motor is 10 HP, 230/460 volt, 1160 rpm. Stainless Steel Mixing shaft is 25.5" and 45" blade to the motor. From mixing blade to top of motor is 68". Mixing ... moreblade is 8" Dia. Unit has swing-out hopper to collect any dripping after raising of shaft.
Free Shipping Condition: New Location: Rancho Cucamonga, United States Hopper capacity: 2.6US-Gallon(10L). Mixer power: 90W. Increase the capacity of hopper up to 10L, hopper cover adopts the lock design,convenient disassembly, ... moreimprove work efficiency. both sides of the hopper, which.
Buy It Now
Free Shipping Condition: New Location: Bhavnagar Wadva S.O, India This Stainless Steel Ribbon Blender Mixing Machine is a high-quality unit perfect for all your mixing needs. The Blender is a Double Ribbon type, with ... moreRibbon Size of 8mm thickness and 40mm width. The Shaft Size is Dia-70 mm solid shaft with a Sheet Thickness of Tank of 4mm.
Buy It Now
Condition: Used Location: Sun Valley, United States WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
Buy It Now
Condition: New Location: Morgantown, United States This is a New working SHARPE SSFGV-100A Portable Stainless steel Air Mixer Agitator. The unithas been tested. The unit has a stainless steel 120V 1 hp ... moreMotor attached with a water-tight toggle switch.
Buy It Now
$57.63 Shipping Condition: New – Open box Location: Baroda, United States If you are not able to pick up locally, we are able to get competitive freight quotes as well.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: This Pneumatic Mixer Is in Good Working Condition. It Is Used for Mixing Paint, Dope, Etc. It Come with Stand and Shafts with the Mixing Propellers ... moreShown. The Height of the Stand Can Be Adjusted. It Need to Work with an Air Compressor. It Is Used for Paint Mix in Paint Factory. It Is Also Used for Mixing Many Kinds of Coating Material. It Is Also Used for Homogeneity, Dispersing in Domestic Industry, Food Industry, Etc. It Is Safe to Use Without Spark and Anti-explosive. The Air Valve Switch Can Be Used to Adjust the Height Automatically. Include: 1* Pneumatic Mixer Machine.
Buy It Now
Condition: Used Location: Wallkill, United States Hydraulic Mixer Bucket. Unit in good and used condition. Includes hydraulic cords. Oil Pressure: 215 (bar).
Buy It Now
Condition: Used Location: Robards, United States LOWER UNIT BUILT BY WERNER + PHLEIDERER ESB-45. MAGNITIC SPEED SENSOR ON THE TWIN SCREW. SCALE DISPLAY NOT INCLUDED.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Mixing Propeller Vane: Stainless Steel. 1 Pneumatic Mixer Machine. This Pneumatic Mixer Is in Good Working Condition. It Is Used forMixing Paint, Dope, ... moreEtc. Mixing Propeller Rod: Φ15mm Stainless Steel.
Buy It Now
Condition: Used Location: Chico, United States Ross Planetary Mixer Model 130-1EL. This unit is in excellent working condition.
Buy It Now
Free Shipping Condition: New Location: United States With the M18 REDLITHIUM battery the user can mix up to 15, 5-Gal buckets on 5.0 Ah battery. The 180 degree adjustable handle is designed to allow every ... moreuser to optimize the handle position for their comfort.
Buy It Now
Free Shipping Condition: For parts or not working Location: Seattle, United States This is an item that does not function as intended and is not fully operational (or is non-functional). If the item sealed with a temper evident tape ... moreor stickers, these must be left intact as you inspect the unit/item.
Buy It Now
$1870.49 Shipping Condition: Used Location: Ireland
Buy It Now
Condition: Used Location: Sun Valley, United States If the item is listed as working, then it was tested to the best of our ability. HOURS OF OPERATION. This item is as seen in pictures.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 5 Gallon Pneumatic Mixer Stand Tank Barrel Paint Mix Blender Stainless Steel New Features: This Pneumatic Mixer Is in Good Working Condition. It Is Used ... morefor Mixing Paint, Dope, Etc. It Come with Stand and Shafts with the Mixing Propellers Shown. The Height of the Stand Can Be Adjusted. It Need to Work with an Air Compressor. It Is Used for Paint Mix in Paint Factory. It Is Also Used for Mixing Many Kinds of Coating Material. It Is Also Used for Homogeneity, Dispersing in Domestic Industry, Food Industry, Etc. It Is Safe to Use Without Spark and Anti-explosive. The Air Valve Switch Can Be Used to Adjust the Height Automatically. Specifications: Power Type: Pneumatic Mixing Capacity: 5Gallon Mixing Propeller Rod: φ15mm stainless steel Mixing Propeller:φ100mm Mixing Pro.
Buy It Now
$75.61 Shipping Condition: Used Location: New Paris, United States Spx Lightnin Mixer Model XJ30 .3HP 208/230/460v 350rpm Warranty 🇺🇸Units in excellent condition Location WH-22JALPsalm 40:12For troubles surround me-too ... moremany to count!My sins pile up so highI can't see my way out.They outnumber the hairs on my head.I have lost all courage.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Material inside the hopper The big hopper. lncrease the capacity of hopper up to10L, can add more color masterbatch,hopper cover adopts the lock design,convenient ... moredisassembly,improve work efficiency. Hopper capacity: 2.6US-Gallon(10L).
Buy It Now
Free Shipping Condition: Used Location: Wooster, United States This has a little dirt but is tested and work as it should. Location- A-3-7. We get our inventory from local manufacturers and liquidators. If for any ... morereason it's not we make things right.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: ... more1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in Package Included 1*Pneumatic Mixer All Accessories for Assembly.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1/2 HP 50 Gallon Pneumatic Mixer Rung Dope Tank 304 Stainless Blade Barrel Type. Safe and explosion-proof, no sparks. It is the best choice for open liquid ... moredrums. The mixer is easily clamped to the side of the bucket and the chucking angle can be adjusted.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States This Pneumatic mixer is in good working condition. The height of the stand can be adjusted. 1 5 Gallon Pneumatic mixer with stand. Power Pneumatic style. ... more1 5 Gallon Barrel. Applicable Material Paint Coating.
Buy It Now
$80.00 Shipping Condition: Used Location: Sun Valley, United States Midwest Mixing N-13 Air Driven Mixer w/ 36" Mixing Rod + Propeller.Units work and fulfill their intended purpose. Both mixers are in decent physical condition. ... more2 units available, however, you might not receive the unit pictured but one similar or in better condition.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Package Included 1*Pneumatic Mixer All Accessories for Assembly.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Specifications: Power type: Pneumatic Mixing capacity: 5Gallon Mixing propeller rod: φ15mm stainless steel Mixing propeller:φ100mm Mixing propeller vane: ... moreStainless steel Horsepower: 1/2HP Include: 1* Pneumatic Mixer Machine Feature： This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. It come with stand and shafts with the mixing propellers shown. The height of the stand can be adjusted. It need to work with an air compressor. It is used for paint mix in paint factory. It is also used for mixing many kinds of coating material. It is also used for homogeneity, dispersing in domestic industry, food industry, etc. It is safe to use without spark and anti-explosive. The air valve switch can be used to adjust the height automatically.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Specifications: Power type: Pneumatic Mixing capacity: 5Gallon Mixing propeller rod: φ15mm stainless steel Mixing propeller:φ100mm Mixing propeller vane: ... moreStainless steel Horsepower: 1/2HP Include: 1* Pneumatic Mixer Machine Feature： This Pneumatic mixer is in good working condition. It is used for mixing paint, dope, etc. It come with stand and shafts with the mixing propellers shown. The height of the stand can be adjusted. It need to work with an air compressor. It is used for paint mix in paint factory. It is also used for mixing many kinds of coating material. It is also used for homogeneity, dispersing in domestic industry, food industry, etc. It is safe to use without spark and anti-explosive. The air valve switch can be used to adjust the height automatically.
|
|
|
|
EC-3029 MIXER UNIT W/ RELIANCE 2 HP MOTOR 208-240VOLT
Description Up for auction is a ERC inventory number EC-3029 MIXER UNIT W/ RELIANCE 2 HP MOTOR 208-240 VOLT W-282. DUE TO SIZE AND WEIGHT THIS ITEM MUST SHIP THROUGH COMMON CARRIER. Condition of Item This item is in used condition. This item/lot is being offered“AS IS” with no written. Implied or expressed warranty nor other guarantee as to its condition or fitness for use. Unless otherwise stated(see known deficiencies) the condition of this item/lot(or it’s fitness for any use/purpose) is unknown. Postage and Handling All items are shipped out United Parcel Service(UPS) Price based upon weight and location. Equipment Recovery Corp can ship to a PO Box. With US Postal Rates applying. To determine shipping charges there is a UPS Ground Shipping Calculator attached to our auctions. ERC will ship UPS to Canada with buyer responsible for all ... morecustoms and international fees applying. Freight Items over UPS weight and size restrictions will be sent via common carrier. Customer is responsible for the freight charge. Unloading freight and/or picking up freight at terminal if possible. ERC will work with customer in trying to find the most cost effective way of shipping. ERC will not ship common carrier Internationally. Store Hours/ Local Pickup Equipment Recovery Corp. is open Monday through Friday 8am-4pm. Saturday by appointment. Any of our items can be picked up to save on shipping charges. I Invoicing Invoices will be sent normally within 24 hours of auctions end. ERC has an Ebay store where more inventory is listed and offered for sale. Please check out our great deals on used equipment each week. Customer Service OUR GOAL IS COMPLETE CUSTOMER SATISFACTION. Our items are used and sold“as-is” However we strive to make every customer happy and satisfied.
|
|
|
MIXER UNIT USED NO TAG
USED NO TAG DAVID BROWN HELICAL UNIT 2.02 RATIO: MHT3 DAYTON 3N447 2 HP MOTOR CONTINENTAL HYDRALUICS: VS5M-32-BT-60L-J DIRECTIONAL VALVE HAWKER 3 HP AC MOTOR TANK DIM: APPROX 29" DEEP X 19" WIDE OVERSIZED: 5 FT X 5 FT SEE PICS APPROX SHIPPING WEIGHT: 2328 LBS. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO PURCHASE PRICE. THESE FEES WILL VARY ACCORDING TO SIZE. PLEASE CONTACT SELLER FOR PRICE OF PALLET& SHIP QUOTE. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES& OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. PLEASE CONTACT US FOR SHIP QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. AJ. Powered by ... moreThe free listing tool. List your items fast and easy and manage your active items. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13e17ea9356-0xe9-
|
|
|
LIGHTNIN 9-TBSDS-2003 MIXER DRIVE UNIT ,USED
QUANITY OF 2. USED. RATIO: 16.91. RATED 200 HP. R.H. ROTATION. TURNS FREELY. SEE PICS. APPROX. SHIP WEIGHT: 5800 LBS. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES, OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COSTS. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL CHARGES WILL BE PRIOR TO BIDDING OR BUYING. TW/PB. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Morse Drum Roller - Mixer (Double unit )
Morse Drum Roller- Mixer( Double unit) Atlantic Equipment Inc. Serving Light. Medium& Heavy Industry 363 Petticoat Lane Bloomingburg. NY 12721(845 807 8727) Morse Drum Roller- Mixer( Double unit) Please pardon the photo. I will get a betterone next time I am at the warehouse/ yard. This unit handles two drums at the same time. I also have Stainless Steel 55 gallon drums available. We do our best to photograph and describe accurately Contact(845) 807 8727 with any questions Thank you for looking& good luck if you are bidding! pat dolan
|
|
|
MIXEL # TKJR 60/50 MIXER DRIVE UNIT SEW-EURODRIVE TYPE REDUCER # RF80LP-184 USED
USED. 5HP 440/255 V 1715RPM. 184TDTR. 3-PH 60HZ MOTOR INSTALLED 78"x46" NEEDS OVER SIZED PALLET! OVERSIZED PALLET:ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO PURCHASE PRICE. THESE FEES WILL VARY ACCORDING TO SIZE. PLEASE CONTACT SELLERFOR PRICE OF PALLET AND SHIP QUOTE. SEE PICS APPROX SHIPPING WEIGHT: 961 LBS ON PALLET INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES& OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. PLEASE CONTACT US FOR SHIP QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. TW/KS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
42016005 Used- Plant Maintenance Service Corporation B-Unit Continuous Mixer, 31
Used- Plant Maintenance Service Corporation B-Unit Continuous Mixer. 316 stainless steel. Approximately 7' diameter x 32' long stainless steel jacket chamber, rated 200 psi at 200 deg F and-20 deg F at 200 psi, includes stationary pins. Approximate 2' diameter shaft with fixed paddles and pins. Top feed throat, no hopper. Driven by a 15 hp, 3/60/230/460 volt, 1740 rpm gear motor, ratio 26.5 to 1. Mounted on a stainless steel frame with casters. Built 2000. ref# 42016005 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
65255 Used- Tokushu Kika Combimix Mixer, Model 2T-160, 316 Stainless Steel. Unit
Click To Enlarge- Used- Tokushu Kika Combimix Mixer. Model 2T-160, 316 Stainless Steel. Unit consists of: 1 double planetary mixer on 1 end with(2) 19" wide rectangular blades, driven by a 15 kw, 200 volt, motor. Includes a 175 gallon stainless steel mixing tank on casters, 1" side bottom outlet. 1 planetary/powermix on 1 end with a 6" diameter dispersion blade, driven by a 5.5 kw, 200 volt, motor. Output rpm approximately 180-1800, 1) 2 blade anchor style agitator, driven by a 2.2 kw vari-speed motor, output rpm approximately 0-49. Includes a 100 gallon stainless steel jacketed mixing can and vacuum hood. Both units mounted on a common frame and raised by hydraulic lift. ref# 65255 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 ... moreItem location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
CHEMINEER 3HT-7.5 7.5 HP 1800RPM 155-UNIT OUTPUT PROCESS MIXER AGITATOR B246615
Brand: CHEMINEER Condition: Used Model: 3HT-7.5 Weight: 426 lbs Dimensions: 25 X 15 X 22 SKU: B246615 Category: Miscellaneous Additional Notes: PRICE? 7.5 HP 1800RPM 155-UNIT OUTPUT RPM PROCESS MIXER
|
|
|
Heytec R41-25/4/1-DA Mixer Unit
Heytec R41-25/4/1-DA Mixer Unit Description Heytec R41-25/4/1-DA Mixer Unit This item requires freight shipping please contact us for a quote prior to purchasing. Manufacturer Heytec Manufacturer Part Number R41-25/4/1-DA Item/Ship Weight 55 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact ... moreus before bidding. Shipping* $ 35.00 SHIPPING IS CRATING FEE ONLY* This item may require palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 46861 Feel free to call with any questions prior to placing a bid! IMPORTANT-PLEASE READ BELOW BEFORE BIDDING. Welcome to our eBay listing! To make your purchase as simple and easy as possible. Please refer to the detailed policies listed below. Our e-mails will come from auctions at recycledgoods.com. Your spam filter might delete them. So please check regularly. Orders will be shipped to the billing address of the credit card only! You should be able to pay by Credit Card using PayPal's guest checkout even if you don't have a PayPal account. You can also call us at(805)648-3300 with card details if you are unable to complete the online checkout. PayPa
|
|
|
Lightnin .25 Hp Vektor Mixer Drive Unit
This mixer is surplus from a pharma business that went bankrupt. I have been able to test the other mixers that were removed from the installation and they worked but do note I was unable to test this one as it requires three phase voltage. Lightnin Vektor.25HP Mixer Motor Unit Serial: 96/E9128002 Ultra Mix Motor: 25 Hp Three Phase Voltage 208-230/ 460 Volts Amps 1.4-1.5/ 75 60 Hertz 1725 RPM 14 Day returns accepted. Buyer will be responsible for return shipping and original shipping costs if this is exercised. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-146a7cc77ed-0xff-
|
|
|
Industral tank/drum mixer unit
Mix-Mor Model# AS 11 air driven GAST NRV 50 air motor 1.7 hp 36 inch SS shaft w/7 inch SS blade High torque gear reduction for heavy materials. Fully tested.Works as should Truck shipped contact for exact shipping costs.
|
|
|
SS Stainless Steel Koch Static Mixing/Mixer Unit 3" Port 24" x 7.5" Type: SMX
SS Stainless Steel Koch Static Mixing Unit 3" Port 24" x 7.5" Type: SMX THIS PUMP IS USED AND APPEARS TO BE IN FAIR CONDITION. THERE IS SOME COSMETIC WEAR AND IS GUARANTEED TO NOT BE DOA. WE HAVE MULTIPLES AVAILABLE AND AS SHOWN IN THE PICTURES SOME WILL HAVE STEEL PARTS. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# SMX APPROX. PRODUCT DIMENSIONS: LENGTH: 24" WIDTH: 7.5" HEIGHT: 7.5" SHIPPING WEIGHT: 43 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. ... moreSHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM F
|
|
|
SS Stainless Steel Chemineer Static Mixing/Mixer Unit 3" Port 25" x 5" 3-KMS-4
SS Stainless Steel Chemineer Static Mixing Unit 3" Port 25" x 5" 3-KMS-4 THIS PUMP IS USED AND APPEARS TO BE IN FAIR CONDITION. THERE IS SOME COSMETIC WEAR AND IS GUARANTEED TO NOT BE DOA. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 3-KMS-4 APPROX. PRODUCT DIMENSIONS: LENGTH: 25" WIDTH: 5" HEIGHT: 5" SHIPPING WEIGHT: 30 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM ... moreSOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPOR
|
|
|
SS Stainless Steel Kenics Static Mixing/Mixer Unit 3" Port 47.5" x 5"
SS Stainless Steel Kenics Static Mixing Unit 3" Port 47.5" x 5" THIS PUMP IS USED AND APPEARS TO BE IN FAIR CONDITION. THERE IS SOME COSMETIC WEAR AND IS GUARANTEED TO NOT BE DOA. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 37-46-040 APPROX. PRODUCT DIMENSIONS: LENGTH: 47.5" WIDTH: 5" HEIGHT: 5" SHIPPING WEIGHT: 32 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. ... moreTHERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HO
|
|
|
Heytec Mixer Unit with A-Spielberg Motor 220/420 VAC 0.25 kW (R41-25/4/1-DA)
Heytec Mixer Unit with A-Spielberg Motor 220/420 VAC 0.25 kW(R41-25/4/1-DA) Heytec R41-25/4/1-DA Mixer Unit with A-Spielberg Motor 220/420 VAC 0.25 kW 0- 2000 RPM Gauge A-Spielberg motor power rating: 380- 420/ 200- 220 VAC. 0.77/ 1.34 Amps, 0.25 kW, 50 Hz, 1420 RPM N2 = 5.8- 0.98 Nm. N2 = 233- 2100/ min Overall dimensions: 13" x 11.5" x 34.5" 55 LBS If you have any questions please contact us prior to bidding. Phone: 805) 648-3300, Normal business hours are 8am- 5pm PST Monday through Friday, Recycled Goods is located at: 3820 N. Ventura Avenue. Ventura, CA 93001, PID 46861
|
|
|
Charles Ross Model LDM-2 Planetary Mixer + GE Thermally Protected Motor Unit
You are bidding on a lab unit consisting of: A Charles Ross planetary paste mixer model LDM-2 with what is believed to be an explosion proof motor. General Electric Thermally protected AC motor. Model 5KC47RG736X, 1 HP-1725RPM-115/230V Robbins& Myers(Motor? Model 312-VF-03L-08 Reimers Electric Steam Generator Model AR8 All units are pictured above. Along with photos of the tags, model information& other specs. Unit was pulled from a working environment, but has not been tested due to the 3 prong plug that plugs into a special outlet which we do not have access to at our facility, therefore we are selling it as/is& for parts/not working. If you have any questions feel free to contact me at the number at the bottom of this listing* IMPORTANT: BIDDERS MUST AGREE TO ALL TERMS AND CONDITIONS STATED BELOW. YOUR BID CONSTITUTES AN AGREEMENT ... moreTO OUR TERMS. ASK QUESTIONS PRIOR TO BIDDING. SHIPPING* Due to the weight and awkward size of the lot this system is free Local Pickup Only. Buyer to pre pay for product and shipping prior to release of product(s) Buyer may pickup the item or BUYER is to arrange shipping. Product will be shipped from zip code 93436. There is no loading dock or forklift at facility– Some loads may require lift gate service. We can palletize and/or prepare for shipping for an additional $50. CA bidders subject to 8% sales tax when applicable unless valid resale certificate provided All sales are final. No returns. All items sold as-is. Where-is. No guarantee or warranty expressed or implied. BOND# 14941945 Item must be paid in full within three days of auction close. Item may be shipped within 5 business days after payment is received. AL&S. Inc. Specializing in Asset Liquidation and Sales 209 West Central Ave Suite A Lompoc. Ca 93436(805) 757-1758
|
|
|
NETZSCH KPS 10 204366/1 MIXER UNIT W/ PUMP REDUCER 2 MOTORS AND CONTROL BOX USED
USED APPROX SHIPPING WEIGHT: 590 LBS. AJ. INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. SEE PICTURES FOR MORE DETAIL OF CONDITION AND TAG INFORMATION, Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14725f38c2f-0x104-
|
|
|
COLTON SIGMA MIXER ~ 18 C.F. CAPACITY MODEL 685 HEAVY DUTY EXPLOSION PROOF UNIT
For sale is a previously owned: Colton Single Arm Sigma/Naben Blade Mixer. Heavy Duty Stainless Steel mixer, Model 685 Serial number 12142. 18 c.f. equipped with Explosion Proof controls. 7.5 HP 575v 3ph electric drive with gear box. Air Lift for counter weighted lid. With double palm switch controls. Hazardous Duty Conduit encasing all electrical lines. C/W Manual and Drawings. Very Nice and clean machine formerly located at a pharma plant(now closed) Please inquire from the seller about shipping and seamless customs clearing to your location from Canada. Or Any questions you may have.
|
|
|
SEW ELECTRIC MOTOR GEARBOX EURODRIVE STIRRER MIXER AGITATOR UNIT BIOTECH, LAB
SEW– EURODRIVE STIRRER AGITATOR UNIT BIOTECH. LAB, FOOD INDUSTRY! This is SINGLE(1 each) MIXER UNIT that came from a pharmaceutical laboratory. I have a total of 2 of these units and they are being sold individually. Each includes a DFT71D4 SEW-EURODRIVE 0.5 HP motor. A RF43DT71D4 Reduction Gearbox, TB Woods/Lovejoy L Jaw Couplings and 20-inch long stainless steel propeller/stirrer shaft(1 inch diameter and notched for a length of 11.5 inches) Also notice that the motor has a custom made stainless steel protective cover. The unit was working perfectly when pulled! Guaranteed to work! These are the specifications: Electric Motor– DFT71D4 Volts 230YY/460Y Amps 2.00/1.00 HP 0.5 RPM 1700 Hz 60 Electric motor brake is 460 Reduction gear box– RF43DT71D4 Input is 1700 RPM Output is 61 RPM Torque 520 lb-in Ratio 27.95 Service factor 2.5 Shipping ... moreis FREE for FedEx Ground in the Continental USA. Shipping to other countries is available(the cost is actual charges with the shipper of your choice) Free shipping only applies to the US Lower 48. I may separate the units in half for shipping(it's just 4 easy bolts) to make them easier to ship. Check out my perfect feedback and buy with confidence!
|
|
|
IKA MAGIC LAB DISPAX-REACTOR DR MULTIPLE STAGE DISPERSING/EMULSIFYING MIXER UNIT
YOU ARE BIDDING ON ONE IKA MAGIC LAB DISPAX-REACTOR DR MULTIPLE STAGE DISPERSING/EMULSIFYING INLINE MIXING UNIT 220-240VAC 50/60 HZ W/ CASE. PORTABLE POWER SUPPLY AND DISPLAY. WHAT IS IN THE PICTURES IS WHAT YOU WILL RECEIVE. THIS ITEM WAS REMOVED FROM THE SHUTDOWN SHOCKWAVE TEHCNOLOGIES FACILITY AND IS GUARANTEED NOT D.O.A. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION.G1X3)JL) PLEASE FOLLOW LINK FOR FURTHER INFORMATION AND SPECIFICATIONS: http:www.ikausa.com/wp-content/uploads/Flyer_magicLAB_e.pdf ESTIMATED RETAIL:$14.000 International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to ... morebidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your!
|
|
|
LEESON G3Y05R LIGHTNIN ELECTRICOR MIXER WITH POWER SWITCH UNIT
Here for your consideration is a LEESON G3Y05R LIGHTNIN ELECTRICOR MIXER WITH POWER SWITCH UNIT. I've powered this unit up and everything functions as it should. Please ask any questions prior to purchase and I'll be more then happy to help. This item is for local pick up only. And if you need freight shipping then all freight arrangements must be made by you the buyer. I can consider taking the mixer off the power switch unit and sell separately for those interested. Once again this item is working order and a great buy for a used item. Thanks for stopping by.
|
|
 |