|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$115.99 Shipping Condition: Used Location: Fleetwood, United States Us at six one zero-nine two one-eight eight four eight. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. Let us know what’s going on. Warranty Information ... moreWe think good. different condition than stated in the ad.
Buy It Now
$73.80 Shipping Condition: Used Location: Fleetwood, United States Cash on Pickup. us at six one zero-nine two one-eight eight four eight. Let us know what’s going on. We think good. When we receive the product we will ... moreconfirm item is. are more than happy to rectify any problems by replacing.
Buy It Now
$58.10 Shipping Condition: Used Location: Cedar Grove, United States 3L Reactor & Mixer. 2- blade stainless steel paddle: each blade 3" wide @ 45 degrees. 2" triclamp mounting assembly (convertible to 2" male NPT).
Buy It Now
Condition: Used Location: Fleetwood, United States Let us know what’s going on. We think good. When we receive the product we will confirm item is. are more than happy to rectify any problems by replacing. ... morereceived in a different condition than stated (DOA, not. ).
Buy It Now
$795.00 Shipping Condition: Used Location: South El Monte, United States STAINLESS STEEL RIBBON BLENDER MIXER IN GREAT CONDITION APPROXIMATELY 6.5 CU FT TUB DIMENSIONS ARE 27” X 21” X 23”H 220V 1PH GEAR MOTOR WEG MOTOR 1.5 ... moreKW 2HP TESTED AND WORKING BEING SOLD AS IS TESTED AND WORKING NO RETURNS ACCEPTED ASK QUESTIONS PRIOR TO BIDDING $795 STANDARD SHIPPING FEES APPLY TO LOWER 48 STATES ONLY ADDITIONAL FEES APPLY TO A RESIDENCE OR LIMITED ACCESS OR LIFT GATE NEEDED ON DELIVERY
Buy It Now
Condition: Used Location: Fleetwood, United States Let us know what’s going on. Warranty Information We think good. When we receive the product we will confirm item is. are more than happy to rectify any ... moreproblems by replacing. received in a different condition than stated (DOA, not. ).
Buy It Now
Condition: Used Location: Millwood, United States Tank is constructed of 316L stainless steel, 3/16" plate with mill finish. Tank does not include flange-mount agitator/mixer. Internal baffles, 2 1/2"Ø ... moresch 40 legs (carbon steel), 24"Ø manway with davit.
Buy It Now
Condition: Used Location: Cleveland, United States Ueshima Sr 6000 Lab Mixer / Blender.
Buy It Now
Free Shipping Condition: New Location: Wilmington, United States For feeding powders and other solids into an inline mixer or pump. Fitting is 316 stainless steel, 2.5" inlet and 2.5" outlet (connects to inlet of pump ... moreor mixer). We have a 2" listed, and we can also provide with reducers to fit other sizes.
Buy It Now
Condition: Used Location: United States Used 2 gallon Ross planetary mixer, model PD2, stainless steel construction, high speed disperser driven by 2 hp, 230/460 volt motor, planetary blade ... moredriven by 1 hp motor, 2 gallon jacketed mix can, vacuum cover, on base with hydraulic lift and. 33 hp hydraulic pump, serial# 60009.
Buy It Now
Condition: Used Location: United States Used Processall plow mixer, model 5700HL, stainless steel construction, 5,700 liter capacity, 200 cu ft total capacity, 140 cu ft working capacity, with ... more(2) 10 hp high speed choppers, air purge seals, with 75 hp, 230/460 volt main motor drive, (3)12" top ports, 8" bottom outlet with valve, serial# 220, built 2003.
Buy It Now
Condition: Used Location: Baton Rouge, United States For sale is one (1) used Philadelphia Mixer. Size: PV-4 PTSL. Motor HP: 3, AGMA SF: 1.5, Input RPM: 1800. Ratio: 14.0-1. Output RPM: 125. (6) Bolt Circle ... more3/4" ID. Do you have access to a forklift.
Buy It Now
Condition: Used Location: Willoughby, United States GRACE MACHINERY SIZE 50 INSULATED PADDLE BLENDER MIXER. Type: PADDLE BLENDER. DRAIN, S/S LIFT COVER, HEAVY DUTY S/S BLADE MIXERS CONSISTING OF (4) 4" ... morex 3" S/S BARS ON A HORIZONTAL S/S SHAFT, MOTOR & GEAR DRIVE NEED REPLACED.
Buy It Now
$103.94 Shipping Condition: Used Location: Fleetwood, United States Cash on Pickup. All Major Credit Cards.
Buy It Now
$83.12 Shipping Condition: Used Location: Fleetwood, United States Us at six one zero-nine two one-eight eight four eight. Let us know what’s going on. Warranty Information different condition than stated in the ad. If ... moreyour item is. received in a different condition than stated (DOA, not. ).
Buy It Now
Free Shipping Condition: Used Location: Lakeland, United States
Buy It Now
Condition: Seller refurbished Location: United States Output RPM: 190. Power: 15 HP. EXPORT COMPLIANCE. CIP - Door to Airport.
Buy It Now
Condition: Used Location: United States From Single Machines to Entire Plants. The Proxio Group Ltd. makes reasonable efforts to ensure accuracy of the information we provide.
Buy It Now
Condition: Used Location: United States From Single Machines to Entire Plants.
Buy It Now
Condition: Used Location: Clover, United States PLASTIC INJECTION MOLDING PELLET MIXER. HOPPER INLET: 3 5/64" I.D. / 3 1/2" O.D. MAGNETIC CHAMBER HAS A KNIFE VALVE INSTALLED. PULLOUT MAGNETIC SECTION ... moreAS PICTURED IN PHOTO #9 ABOVE. UNIMOUNT 125 MOTOR INFORMATION.
Buy It Now
Condition: New – Open box Location: United States The Proxio Group Ltd. makes reasonable efforts to ensure accuracy of the information we provide.
Buy It Now
Condition: New Location: Henderson, United States They are very high-quality mixers and have a variable angle capability that allows you to adjust the angle that the prop is at in the tank from directly ... moreoutward from the mounting plate to 30 degrees either side of vertical to the mount so a 60 degree angle.
Buy It Now
Condition: Used Location: Millwood, United States 57"-59" straight side wall with bottom slope directed to 1.5"Ø drain. Tank is constructed from 14GA stainless steel sheet. Height to top of tank: 82". ... moreIncludes plastic cover with hinged panel.
Buy It Now
Condition: Used Location: United States
Buy It Now
Condition: Used Location: Millwood, United States
Buy It Now
Condition: New Location: Henderson, United States Yep that sounds like a 85% savings so your cost is only 15% of new for the identical mixer. If you buy two the savings are even larger. They are very ... morehigh-quality mixers and have a variable angle capability that allows you to adjust the angle that the prop is at in the tank from directly outward from the mounting plate to 30 degrees either side of vertical to the mount so a 60 degree angle.
Buy It Now
Condition: Used Location: Fleetwood, United States WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. • Local pick up. Let us know what’s going on. We think good. are more than happy to rectify any problems ... moreby replacing. received in a different condition than stated (DOA, not. ).
Buy It Now
Condition: Used Location: United States From Single Machines to Entire Plants. The Proxio Group Ltd. makes reasonable efforts to ensure accuracy of the information we provide.
Buy It Now
Condition: Used Location: Fleetwood, United States Used Hockmeyer HVA-3 S/S Disperser/Agitator/Mixer for Tank/Tote/Barrel/Drum THIS MIXER HAS 48 INCHES OF LIFT AND WILL FIT OVER A 32" TANK. THIS OFFER ... moreDOES NOT INCLUDE A HYDRAULIC UNIT FOR THE LIFT CYLINDER OR A MOTOR FOR THE MIXER. THE MOTOR COUPLES TO A LOVE-JOY SO WE DID NOT MEASURE THE SHAFT. TO OPEN A LINK TO HOCKMEYER FOR ALL YOUR TECHNICAL QUESTIONS OR TO SEE WHAT SIZE MOTOR IS REQUIRED. PLEASE EMAIL WITH GENERAL QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL: HVA-3 OVERALL DIMENSIONS: WIDTH: 40" LENGTH: 72" HEIGHT: 90" SHIPPING WEIGHT: 2100 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXP
Buy It Now
Condition: Used Location: Fleetwood, United States Let us know what’s going on. We think good. When we receive the product we will confirm item is. are more than happy to rectify any problems by replacing. ... morereceived in a different condition than stated (DOA, not. ).
Buy It Now
Condition: Used Location: Fleetwood, United States WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. Let us know what’s going on. When we receive the product we will confirm item is. are more than happy to ... morerectify any problems by replacing. received in a different condition than stated (DOA, not. ).
Buy It Now
Condition: For parts or not working Location: Berthoud, United States Plow Mixer?. DVT 800 Untested. I do not know if this is considered a ribbon blender or possibly a plow mixer. I know it is set up with nitrogen lines ... moreand several other lines going in and out of it.
Buy It Now
Condition: Used Location: Willoughby, United States GRACE MACHINERY SIZE 6000 INSULATED PADDLE BLENDER MIXER. 125 CU FT. Type: PADDLE BLENDER MIXER. Size: 6000. OUTLETS: (2) 2", MOTOR & GEAR DRIVE WILL ... moreNEED REPLACED, MISSING TOP HOOD COVER. Condition: USED, "AS-IS".
Buy It Now
Condition: Used Location: Millwood, United States 39" O.D. DESIGNED FOR MOUNTING AGITATOR MIXER. COVER HAS 10" I.D. FLANGED INLET IN CENTER AND 8 OUTER STUDS ON A 24" DIA BOLT CIRCLE FOR MOUNTING MIXER ... moreFLANGE.
Buy It Now
Condition: Used Location: United States 2 LITER DIOSNA HIGH SHEAR MIXER, MODEL P 1/6, S/S. Used Diosna high shear granulating mixer. model P 1/6, stainless steel construction with 2 liter bowl ... morewith chopper.
Buy It Now
Condition: Used Location: United States
Buy It Now
Condition: Used Location: Millwood, United States Mixer housing is 30"W X 78"L (wall: 0.128" thk.). Ribbon speed = 40 RPM. Demonstration video on file. 304 stainless steel mixing chamber. Driven by a ... more5HP gearmotor & chain reduction drive. Full top cover with hinged panels on each end.
Buy It Now
Condition: New – Open box Location: Millwood, United States HAS NO PART NUMBER.PINION P/N: 45879.
Buy It Now
Condition: Used Location: Fleetwood, United States Let us know what’s going on. Warranty Information us at six one zero-nine two one-eight eight four eight. different condition than stated in the ad. If ... moreyour item is. received in a different condition than stated (DOA, not. ).
Buy It Now
Condition: Used Location: Fleetwood, United States Us at six one zero-nine two one-eight eight four eight. Let us know what’s going on. Warranty Information We think good. When we receive the product we ... morewill confirm item is. are more than happy to rectify any problems by replacing.
Buy It Now
Condition: Used Location: Monon, United States 3.5 Cubic feet total capacity. Driven by a 7.5 hp, 3/60/230/460 volt.
Buy It Now
$88.67 Shipping Condition: New Location: Wilmington, United States For feeding powders and other solids into an inline mixer or pump. Fitting is 316 stainless steel, 2" inlet and 2" outlet (connects to inlet of pump or ... moremixer). We can also provide with reducers to fit other sizes.
Buy It Now
Condition: Used Location: United States
Buy It Now
Condition: Used Location: United States The Proxio Group Ltd. makes reasonable efforts to ensure accuracy of the information we provide.
Buy It Now
Condition: Used Location: Greensboro, United States TANK IS ON FOUR RAISED LEGS. TANK HAS 3” OF INSULATION ON THE SIDE WALLS. TANK ALSO HAS A FLANGED AND VALVED BOTTOM SIDE DRAIN NOZZLE AND AN ELECTRIC ... moreWATLOW HEATER FOR HEATING THE TANK CONTENTS. TANK HAS A 3/4 HP LIGHTNIN MIXER MODEL XJ-75VM, SERIAL NUMBER 96/E63659-01.
Buy It Now
Condition: Used Location: Lake City, United States It has a. 87HP lightning mixer and 1" jacket ports along with lid that has three sanitary ports of 2", 3", and 4". National Board#2984. The agitator is ... more230/460V, three phase.
Buy It Now
Condition: Used Location: Clover, United States INJECTION MOLDING PLASTIC COLOR PELLET HOPPER / MIXER / BLENDER. STAINLESS STEEL. If your item is received in a different condition than stated (DOA, ... morenot working properly etc. 1 JM 12/22/15. MOTOR IS 480V 3 PH. ).
Buy It Now
Condition: Used Location: Rockford, United States Mixer's serial number: 87601. Mixer's approximate total weight: 3000 lbs. SOLD AS IS. Local pickup is available. DRIVE END BEARING: X 50BC02XPP3M. DRIVE ... moreEND BEARING: 65BCC3XPP3M.
Buy It Now
Condition: Used Location: Willoughby, United States BAKER PERKINS MIXER BLENDER JAM HOPPER. Material: 304 SS (ENTIRE UNIT), 316 SS MIXER BLADES. Job #: 066. Condition: USED, "AS-IS".
Buy It Now
Condition: Used Location: Greensboro, United States WITH LOAD CELLS. 30,000 LB CAPACITY PUG MILL PADDLE MIXER MOUNTED ON LOAD CELLS. DUAL SHAFT PADDLE DESIGN FOR INTERNAL MIXING. SHAFT MOUNT SPEED REDUCER, ... moreAND LOAD CELLS.
Buy It Now
Condition: New – Open box Location: Magna, United States You are purchasingONE (1) - Chemineer Kenics Mixer Model: 8-KMS-2 8" CL150 RF Flanged x 27-1/2" Long. Pic: T0817. We pride ourselves in being one of the ... morelargest new surplus pipe, valve, and fitting distributors in the United States.
Buy It Now
Condition: Used Location: Greensboro, United States Flanges are 316 stainless steel so shell is probably 316 stainless steel. Flanges are 316 L stainless steel. Tank appears to be very clean. Mixer motor ... moreis 0.5 HP, explosion proof. Tank is in excellent condition.
Buy It Now
Condition: New Location: Corona, United States OTHER SIZES AVAILABLE! FROM 2.5 CU FT - 450 CU FT. STAINLESS STEEL CONSTRUCTION. SOLID STAINLESS STEEL SHAFT. FREIGHT NOT INCLUDED IN PRICE. 1 YEAR WARRANTY ... moreON MANUFACTURE DEFECTS.
Buy It Now
Condition: Used Location: United States From Single Machines to Entire Plants.
Buy It Now
Condition: Used Location: Greensboro, United States COMPLETE WITH SKID, MIXER, TANK, PUMP, AND CANISTER LIFT. SKID IS 9” X 83”bAND IS ALSO STAINLESS STEEL. ALL STAINLESS STEEL CONSTRUCTION, INCLUDING SKID. ... moreTANK HAS EXTERNAL MIXER, ALL STAINLESS STEEL.
Buy It Now
Condition: Used Location: Greensboro, United States ITEM 1276: 110 GALLON STAINLESS STEEL INSULATED MIX TANK. FOOD GRADE DESIGN. SIDE DRAIN VALVE GIVES FULL DRAINAGE AND IS FOOD GRADE DESIGN. TANK HAS A ... moreMIXER WITH 2 HP 230/460/3/60 VOLT MOTOR. MIXER SHAFT HAS FOUR 13” WIDE X 8” HIGH STAINLESS STEEL RECTANGULAR PITGCH BLADE TURBINE MIXER BLADES.
Buy It Now
Condition: Used Location: Clover, United States CAPACITY : 12 GALLON. STAINLESS TANK. TANK WAS USED IN INDUSTRY; NOT SANITARY. MIXER SHAFT IS STAINLESS. REMOVABLE TOP. NEW, in box. NEW, no box. USED, ... morebut in good working condition.
Buy It Now
Condition: Used Location: United States Used 150 liter TK Fielder high shear granulating mixer, model PMA150, portable design, stainless steel construction, 150 liter jacketed bowl, with 15/10 ... morehp, main impeller, 5.4/4 hp chopper motors, 480 volt, XP design, serial# 8093, built 1991.
Buy It Now
Condition: New Location: Corona, United States 304 STAINLESS STEEL CONSTRUCTION (316 MATERIAL OPTIONAL ON CUSTOM ORDERS). -SOLID SHAFT. Photo for reference only. actual unit may have slight differences. ... more1 YEAR WARRANTY AGAINST MANUFACTURER DEFECTS.
Buy It Now
Condition: New Location: Corona, United States OTHER SIZES AVAILABLE! FROM 1 CU FT - 450 CU FT. 53 CU FT. (WORKING CAPACITY) RIBBON BLENDERS. (53cf Working Capacity). THE LIQUID SPRAY SYSTEM SHOWN ... moreIS OPTIONAL AND NOT INCLUDED IN PRICE. 304 STAINLESS STEEL CONSTRUCTION.
|
|
|
|
90293 Used- Magna High Speed Single Arm Mixer, Model 50H-4C1. Approximate 10 gal
Used- Magna High Speed Single Arm Mixer. Model 50H-4C1. Approximate 10 gallon/50 pound working capacity, 304 stainless steel. Jacketed bowl 18" front to back x 17-1/2" left to right x approximately 26" deep. Geared one end, 1/3 hp gear tilt, fixed top dust hood. 4 bar mixing blade. Driven by a 5 hp, 3/60/208-230/460 volt, 1750 rpm gearmotor, ratio 4.431:1. Includes an inverter and control panel. Built 1999. ref# 90293 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
90240 Used- Baker Perkins Laboratory Double Arm Mixer, Approximate 0.12 Gallon W
Used- Baker Perkins Laboratory Double Arm Mixer. Approximate 0.12 Gallon Working Capacity, 316 Stainless Steel. Carbon steel bowl 4" left to right x 4-1/2" front to back x 3-1/2" deep x 2" bowl extension. Tangential sigma blades, geared both ends, manual tilt, removable top plastic cover. Driven by a 1/4 hp, 1/60/115/230 volt, 1725 rpm gear motor, ratio 31.3:1, gear rpm 56. Mounted on a carbon steel base. ref# 90240 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
90216 Used- Lab Size Double Arm Mixer, approximate .5 gallon working capacity, 3
Used- Lab Size Double Arm Mixer. Approximate.5 gallon working capacity, 316 stainless steel. Carbon steel jacketed bowl 6-3/4" left to right x 6-3/4" front to back x 6-1/4" deep. Sigma blades, geared one end, no top cover, manual tilt, start/stop controls. Driven by a.5 kW, 3/50/220/380 volt, 40 rpm motor. Mounted on a carbon steel frame. ref# 90216 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
90214 Used- Lab Double Arm Mixer, approximate .5 gallon working capacity, 321 st
Used- Lab Double Arm Mixer. Approximate.5 gallon working capacity, 321 stainless steel. Carbon steel jacketed bowl 6-3/4" left to right x 6-3/4" front to back x 6-1/2" deep. Sigma blades, geared one end, removable top cover, manual tilt, start/stop controls. Driven by a.5 kW, 3/50/220/380 volt, 40 rpm motor. Mounted on a carbon steel frame. ref# 90214 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
90213 USED- Baker Perkins Lab Size Double Arm Mixer, approximate .75 gallon work
USED- Baker Perkins Lab Size Double Arm Mixer. Approximate.75 gallon working capacity, carbon steel. Carbon steel jacketed bowl 5-1/4" left to right x 7-1/2" front to back x 7-1/4" deep. Dispersion blades geared both ends, removable top cover, manual tilt, start/stop controls. Driven by an approximate 2 hp motor. Mounted on a carbon steel I-beam frame. ref# 90213 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
90212 Used- Baker Perkins Lab Size Double Arm Mixer, approximate 2 gallon workin
Used- Baker Perkins Lab Size Double Arm Mixer. Approximate 2 gallon working capacity, carbon steel. Carbon steel jacketed bowl 10" left to right x 11" front to back x 9" deep x 6" bowl extension. Sigma blades, geared both ends, removable top cover, manual tilt, start/stop controls. Driven by a 3 hp, 3/60/208-220/440 volt, 1725 rpm Reeves gearmotor. Mounted on a carbon steel I-beam frame. ref# 90212 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13e5cb98874-0xfb-
|
|
|
89571 Used- Baker Perkins lab double arm mixer, approximate .75 gallon working c
Used- Baker Perkins lab double arm mixer. Approximate.75 gallon working capacity, 316 stainless steel. Carbon steel jacketed bowl 5-1/4" left to right x 7" front to back x 7" deep. Sigma blades, geared both ends, removable top cover, manual tilt, start/stop controls. Driven by a 2 hp, 3/60/208-220/440 volt, 1725 rpm motor. Mounted on a carbon steel frame. ref# 89571 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
89565 USED: Double arm mixer, low boy design, approximate 200 gallon working cap
USED: Double arm mixer. Low boy design, approximate 200 gallon working capacity, carbon steel. Jacketed bowl 53" left to right x 43-1/2" front to back x 26" deep. 12" top bowl extension. Tangential sigma blades, counterweight top cover, geared both ends, single ram hydraulic tilt with a 3 hp power pack. Mixer driven by a 60 hp, 3/60/440 volt, 1775 rpm motor thru a Falk reducer, ratio 11.31:1. ref# 89565 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
89564 Used- Double arm mixer, approximate 200 gallon working capacity, carbon st
Used- Double arm mixer. Approximate 200 gallon working capacity, carbon steel. Jacketed bowl 49-1/4" left to right x 45-1/4" front to back x 26" deep. 12" top bowl extension. Tangential sigma blades, counterweight top cover, single ram hydraulic tilt, geared both ends. Mixer driven by a 60 hp, 3/60/230/460 volt, 1785 rpm motor. ref# 89564 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
89553 USED: Double arm mixer, approximate 200 gallon working capacity, carbon st
USED: Double arm mixer. Approximate 200 gallon working capacity, carbon steel. Jacketed bowl 62" left to right x 45" front to back x 28" deep. 12" top bowl extension. Overlapping sigma blades, geared both ends, top cover, hydraulic tilt. Driven by a 45 kw, 3/50/380-420 volt, 1480 rpm motor thru reducer 23.93:1. ref# 89553 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
89065 Used- P. Prat S A Double Arm Mixer, Model AA. Approximate 13 gallon workin
Used- P. Prat S A Double Arm Mixer. Model AA. Approximate 13 gallon working capacity, 304 stainless steel. Stainless steel jacketed bowl 16-1/8" left to right x 17-1/8" front to back x approximately 13" deep. Overlapping sigma blades, geared one end, single ram hydraulic tilt with a.37 kw motor. Domed top cover with safety grate, not suitable for vacuum. Driven by a 7.5 kw(10 hp) 3/50/380 volt, 960 rpm motor. ref# 89065 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13e5cb989bd-0xff-
|
|
|
83474 USED: Crepaco single arm mixer, model FB, approximate 170 gallon working c
USED: Crepaco single arm mixer. Model FB, approximate 170 gallon working capacity, 316 stainless steel. Non-jacketed bowl 35" front to back x 36" left to right x approximately 38" deep. Open top with safety grate. 2-3/4" diameter shaft with a double gate style blade. 3-1/2" tri-clamp center bottom outlet. Unit set up for hydraulic drive, no power pack. Includes a Dodge torque arm reducer. Mounted on 4 stainless steel legs. ref# 83474 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e647031c8-0x103-
|
|
|
80647 Used- Hill Homo Mixer, 316 Stainless Steel. Approximate 6" diameter, 4 bla
Used- Hill Homo Mixer. 316 Stainless Steel. Approximate 6" diameter, 4 blade rotor. 56" Long 1-3/4" diameter carbon steel shaft. Driven by a 30/15 hp, 3/60/208 volt, 3560/1785 rpm XP motor. ref# 80647 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
80645 Used- Hill Homo mixer, 316 stainless steel. Approximate 6-1/2" diameter, 4
Used- Hill Homo mixer. 316 stainless steel. Approximate 6-1/2" diameter, 4 blade rotor x 58" long 1-3/4" diameter carbon steel shaft. Driven by a 30/15 hp, 3/60/200 volt, 3445/1735 rpm motor. ref# 80645 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
80621 Used- Homo Mixer, 316 Stainless Steel. Approximate 6" diameter, 4 blade ro
Used- Homo Mixer. 316 Stainless Steel. Approximate 6" diameter, 4 blade rotor x 63" long 1-3/4" diameter shaft. Driven by a 30 HP, 3/60/230/460 Volt, 3550 RPM XP motor. ref# 80621 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
44130005 Used- Double Arm Mixer, 304 Stainless Steel. Approximate 10 gallon work
Used- Double Arm Mixer. 304 Stainless Steel. Approximate 10 gallon working capacity. Stainless steel jacketed bowl 19-1/2” left to right x 15-7/8” front to back x approximate 13-1/2”deep, no rating. 2) Shafts with paddle type blades with welded pins, geared both ends, counter balanced domed top cover, suitable for vacuum. Manual tilt. Driven by a 1.5hp, 3/60/208-230/460 volt, 1730 rpm variable speed motor with control panel. Mounted on a carbon steel frame with casters. ref# 44130005 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
43219015 Used- Serra Machinery Cone Mixer, Approximate 0.7 square meter, 17.7 cu
Used- Serra Machinery Cone Mixer. Approximate 0.7 square meter, 17.7 cubic feet(500 liter) capacity, 316 Stainless Steel. Approximate 51" diameter x 60' cone x dished top. Internal rated 4 bar(58 psi) Top entering agitator, 2-1/2" diameter bolt together shaft with(1) blade, and(1) scraper. Driven by a 2.2 kw, 3/50/220/380 volt, 1415 rpm gear motor. Openings top 15" 3" 2) 6" x 12" 2) 18" 1) with a cover. 6" x 11" Center bottom outlet. Mounts on side lugs. ref# 43219015 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
40341007 Used- Scott Turbon Double Planetary Mixer, Model 220GALDPM, approximate
Used- Scott Turbon Double Planetary Mixer. Model 220GALDPM, approximately 220 gallons, 304 stainless steel. 1) 15-5PH stainless steel stirrer, 1) missing, vacuum hood with charge port, 2) 43 1/2' diameter x 37 1/2' deep dimple jacketed mixing cans. Driven by a 50 hp, 3/60/230/460 volt, 1765 rpm hydraulic power pack. Includes(2) 5 hp vacuum pumps with tank. ref# 40341007 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
73610 Used- Guittard Double Arm Mixer, Type M54, Carbon Steel.Approximate 26.42
Used- Guittard Double Arm Mixer. Type M54, Carbon Steel.Approximate 26.42 gallon working capacity.Jacketed bowl measures approximately 22" left to right x 23" front to back x approximately 20" deep, tangential sigma blades, geared both ends. Domed top cover with 20" top manway. Driven by a 10 hp, 3/60/208-220/440 volt, 1160 rpm motor thru a reducer.Mounted on a carbon steel base. ref# 73610 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
48362 Used- J.H. Day Double Arm Mixer, approximate 35 gallon working capacity, c
Used- J.H. Day Double Arm Mixer. Approximate 35 gallon working capacity, carbon steel. Jacketed bowl measures approximately 21 3/4" left to right x 28 1/2" front to back x 32" deep, rated 125 psi at353 deg F. Dispersion blades tangential. Geared one end. Packing glands. Hydraulic tilt driven by a 5 hp, 3/60/575 volt, 1145 rpm motor. Compression ram top cover. Mixer driven by a 50 hp 3/60/575 volt, 1770 rpm motor thru gearbox, ratio 4.17:1.Unitized on a common carbon steel base.Jacket and shell 1/2" thick. ref# 48362 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
64469 Used- Baker Perkins Double Arm Mixer, approximate 450 gallon working capac
Used- Baker Perkins Double Arm Mixer. Approximate 450 gallon working capacity, 316 stainless steel. Non-Jacketed trough measures 60" left to right x 62" front to back x approximately 43" deep. 347 stainless steel sigma blades, geared(1) end, packing glands, 12" high extension with top cover, outboard bearings, electric crank tilt motor with brake, 1.5 kW, 3/50/440 volt, 1440 rpm. Missing main drive. Mounted on carbon steel stands. ref# 64469 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
63518 Used- Werner & Pfleiderer Double Arm Mixer, approximate 300 gallon capacit
Used- Werner& Pfleiderer Double Arm Mixer. Approximate 300 gallon capacity, carbon steel. Carbon steel jacketed bowl measures 60" left to right x 52 3/4" front to back x approximately 42" deep. Sigma type blades, geared both ends, flat bolt top 1/2 hinged top cover. No motor. 5" center bottom outlet on each side of trough. Mounted on a carbon steel base. ref# 63518 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
42802 Used- Mixer-Extruder, Approximate 150 Gallon Working Capacity, Carbon Stee
Click To Enlarge- Used- Mixer-Extruder. Approximate 150 Gallon Working Capacity, Carbon Steel. Non-jacketed bowl measures approximately 43 1/2" left to right x 39 1/2" front to back x 31" deep. Tangential sigma blades, driven by an approximate 11/15 kW motor. Geared one end. Approximate 11" diameter aluminum screw, driven by a 7.5 kW, 3/50/380 volt, 1450 rpm motor. No top cover. Unitized on a carbon steel frame. ref# 42802. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on ... moreshipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
40664001 Used- AMK Double Arm Mixer, Type VII, carbon steel. Approximate working
Click To Enlarge- Used- AMK Double Arm Mixer. Type VII, carbon steel. Approximate working capacity 15 gallon, 29 gallon/112 liter total) Jacketed bowl 20” left to right x 18 3/4” front to back x 15” deep, internal rated-1 bar at 120 deg C, jacket rated 3 bar(43 psi) at 120 deg C. Tangential sigma blades, geared one end, top safety grate, domed top cover with sight glass, suitable for vacuum. Single ram hydraulic tilt with power pack. Mixer driven by a 7.5 kw, 3/50 motor thru a reducer. ref# 40664001. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base ... moreshipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
40531001 Used- Homo Mixer, 304 stainless steel. Approximate 13" diameter 4 blade
Click To Enlarge- Used- Homo Mixer. 304 stainless steel. Approximate 13" diameter 4 blade rotor x 103" long, 2 1/2" diameter shaft. Driven by a 100 hp, 3/60/460 volt, 1185 rpm XP motor. Mounted on a 23' x 23' base. ref# 40531001. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. ... morePlease advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
71540 Used- Baker Perkins Double Arm Mixer, Approximate 50 Gallon Working Capaci
Click To Enlarge- Used- Baker Perkins Double Arm Mixer. Approximate 50 Gallon Working Capacity, Carbon Steel. Jacketed bowl, 43" front to back x 27" left to right x approximately 32" deep, rated 125 psi at 450 deg F. Dispersion blades, geared one end, no top cover.Screw tilt driven by a 2 hp, 3/50/220/440 volt, 1450 rpm motor. Mixer driven by a 125 hp, 3/60/460 volt, 1185 rpm motor. Unitized on a common carbon steel base. ref# 71540. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending ... moreon shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
89079 Used- Farrel Banbury Mixer, Model F80. Approximate 80 liter, 21 gallon, 11
Click To Enlarge- Used- Farrel Banbury Mixer. Model F80. Approximate 80 liter, 21 gallon, 116 pound working capacity. Chrome plated chamber, carbon steel jacketed, drop door design. Wing style cored rotors, approximately 30-105 RPM. 10-1/2" x 24" feed opening with ram feeder. Driven by a 400 HP, 500 Volt, 1150/2300 RPM DC motor thru a Farrel gearbox, drive ratio 11.652:1. Includes a Farrel 2 HP hydraulic power pack, 2) Viking pumps, 1) modular force feed lubricator, Lubriquip Sentinel lube system, 440 Kva transformer, control panel and a Reliance Maxpak Plus VS drive panel. ref# 89079 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description ... moreor contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
45315001 Used-Marion Paddle Type Mixer, Approximate 200 Cu.Ft. Stainless Steel
Click To Enlarge- Used-Marion Paddle Type Mixer. Approximate 200 Cu.Ft. Stainless Steel, 144 in length x 56 in Top Opening F-B/ 64 in Diameter through Center Drive F-B x 72 in Depth. Falk Gear Box Drive, 125 Horse Power Motor/ 1760 RPM/460 Volt, Stainless Steel Leg Base, Approximate 17-1/2 ft x 6 ft Floor Space. ref# 45315001 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This ... morecost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
48362 Used- J.H. Day Double Arm Mixer, (Like a Kobe) Approximate 35 gallon worki
Click To Enlarge- Used- J.H. Day Double Arm Mixer. Approximate 35 gallon working capacity, carbon steel. Jacketed bowl measures approximately 21 3/4" left to right x 28 1/2" front to back x 32" deep, rated 125 psi at353 deg F. Dispersion blades tangential. Geared one end. Packing glands. Hydraulic tilt driven by a 5 hp, 3/60/575 volt, 1145 rpm motor. Compression ram top cover. Mixer driven by a 50 hp 3/60/575 volt, 1770 rpm motor thru gearbox, ratio 4.17:1.Unitized on a common carbon steel base.Jacket and shell 1/2" thick. ref# 48362 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. ... moreShips to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
45429003 Used- Ross Hi-Shear Mixer, Model ME50, 316 Stainless Steel. Approximate
Click To Enlarge- Used- Ross Hi-Shear Mixer. Model ME50, 316 Stainless Steel. Approximately 23" long shaft x 3-7/8" diameter with a 2" diameter, 4 blade rotor. Driven by a 1-1/2 hp, 3/60/208-230/460 volt, 3450 rpm XP motor. ref# 45429003 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. ... morePrep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
 |