|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company .2255 ST FL RHC Carbide Reamer, Diameter: .2255, Number of Flutes: 4, Single End, Right Hand Cut, Length of Cut: 1.0000, Overall ... moreLength: 3.0000, Shank Diameter: 0.2255, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated, MPN: 71047, PKG QTY: 1 PC
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company .2310 ST FL RHC Carbide Reamer, Diameter: .2310, Number of Flutes: 4, Single End, Right Hand Cut, Length of Cut: 1.0000, Overall ... moreLength: 3.0000, Shank Diameter: 0.2310, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated, MPN: 71101, PKG QTY: 1 PC
Buy It Now
Free Shipping Condition: Used Location: Bay Shore, United States (3) NEW ED28 Light Bulbs.
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company .0925 ST FL RHC Carbide Reamer, Diameter: .0925, Number of Flutes: 4, Single End, Right Hand Cut, Length of Cut: 0.5000, Overall ... moreLength: 2.0000, Shank Diameter: 0.0925, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated, MPN: 69767, PKG QTY: 1 PC
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company 3/32 2FL DE Stub TiN Carbide End Mill, 63947, Diameter: 3/32, Number of Flutes: 2, End Style: Square, Length of Cut: 3/16, Overall ... moreLength: 1-1/2, Shank Diameter: 1/8, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: TiN
Buy It Now
$6.00 Shipping Condition: New Location: Arlington, United States Subject to prior sale.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Milling machine lifting crank specifications: 7 teeth. 1X milling machine lifting crank. Your satis faction is our ultimate goal. Item TypeMilling Machine ... morePart. Color: silver. Product material: high quality alloy.
Buy It Now
Free Shipping Condition: New Location: San Leandro, United States 60sn/40pb. 062 Glowcore 2% 1# spools.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: This Is A Look At The High-Quality 3-Piece 3/8" Thread Milling Machine Rotation Handle, Which Can Be Applied To Most Milling Machines. ... moreFeatures: Color: Silver Material: Iron Size: Length 108mm Thread: 3/8” Model: D26 Packing Size: 12*8*3.5cm Gross Weight: 0.6kg Net Weight: 0.5kg The Package Includes: 3x Handle.
Buy It Now
Free Shipping Condition: New Location: Hebron, United States Model: K250. Type: Keys. All products are quality checked. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and ... morefriendly manner.
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company 7/64 2FL SE REG TiN Carbide End Mill, 61206, Diameter: 7/64, Number of Flutes: 2, End Style: Square End, Length of Cut: 3/8, Overall ... moreLength: 1-1/2, Shank Diameter: 1/8, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: TiN
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company 21/64 2FL SE REG BN Carbide End Mill, 63160, Diameter: 21/64, Number of Flutes: 2, End Style: BallNose, Length of Cut: 1, Overall ... moreLength: 2-1/2, Shank Diameter: 3/8, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated
Buy It Now
$5.00 Shipping Condition: New Location: Rancho Cucamonga, United States
Buy It Now
$11.70 Shipping Condition: New – Open box Location: Puyallup, United States SPANNER WRENCHES FOR 1-1/4 MILLCHUCKS. LOT OF 3 EA, UNUSED SURPLUS IN GOOD CONDITION. 2 EA SYIC-84193G.
Buy It Now
Free Shipping Condition: Used Location: Oxnard, United States REF: TATUNGTL10S,1/24.
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company 1/8 2FL SE Stub BN TiCN Carbide End Mill, 62938, Diameter: 1/8, Number of Flutes: 2, End Style: Ball Nose, Length of Cut: 1/4, Overall ... moreLength: 1-1/2, Shank Diameter: 1/8, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: TiCN
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company .0530 ST FL RHC Carbide Reamer, Diameter: .0530, Number of Flutes: 4, Single End, Right Hand Cut, Length of Cut: 0.3750, Overall ... moreLength: 1.5000, Shank Diameter: 0.0530, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated, MPN: 69388, PKG QTY: 1 PC
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company .0540 ST FL RHC Carbide Reamer, Diameter: .0540, Number of Flutes: 4, Single End, Right Hand Cut, Length of Cut: 0.3750, Overall ... moreLength: 1.5000, Shank Diameter: 0.0540, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated, MPN: 69398, PKG QTY: 1 PC
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company .0585 ST FL RHC Carbide Reamer, Diameter: .0585, Number of Flutes: 4, Single End, Right Hand Cut, Length of Cut: 0.3750, Overall ... moreLength: 1.5000, Shank Diameter: 0.0585, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated, MPN: 69442, PKG QTY: 1 PC
Buy It Now
Free Shipping Condition: New Location: Sacramento, United States Grit Type: Very Fine. Paint And Paint Supplies. National Hardware 3-1/2 in. FINISH PAD VFINE 1PK. Hand Tools And Tool Accessories. The are designed for ... moreapplications ranging from heavy-duty cleaning to polishing.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States 2 PK 159648A1 SEAL FITS CASE CX210.
Buy It Now
Free Shipping Condition: New Location: United States Specification: Color: silver Packing size: 26*5*4cm Package weight: 0.97kg Product material: high quality alloy Milling machine lifting crank specifications: ... more9 teeth Inner diameter: 27.5mm Inner hole: 16mm Outer diameter: 39.5mm Product features: flexible, durable, smooth and smooth, zinc alloy is tougher, flexible and easy to use, smooth and smooth, not stable. It has good mechanical properties at room temperature and high wear resistance. The package includes: 1X milling machine lifting crank.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company 3/8 2FL SE REG w/.060R Carbide End Mill, 61528, Diameter: 3/8, Number of Flutes: 2, End Style: Corner Radius, Length of Cut: 1, Overall ... moreLength: 2-1/2, Shank Diameter: 3/8, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated
Buy It Now
$5.35 Shipping Condition: New Location: East Peoria, United States Material CS TiALN. Thickness 4.00mm (.157").
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company .1525 ST FL RHC Carbide Reamer, Diameter: .1525, Number of Flutes: 4, Single End, Right Hand Cut, Length of Cut: 0.7500, Overall ... moreLength: 2.5000, Shank Diameter: 0.1525, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated, MPN: 70345, PKG QTY: 1 PC
Buy It Now
$15.95 Shipping Condition: New Location: Beaver Dam, United States
Buy It Now
$15.47 Shipping Condition: New – Open box Location: Simpsonville, United States Length: 50".
Buy It Now
Free Shipping Condition: New Location: Hebron, United States Model: K250. Type: Keys. All products are quality checked. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and ... morefriendly manner.
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company 29/64 2FL SE REG AlTiN Carbide End Mill, 61419, Diameter: 29/64, Number of Flutes: 2, End Style: Square End, Length of Cut: 1, Overall ... moreLength: 3, Shank Diameter: 1/2, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: AlTiN
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States I have Thousands of Manuals for Metal Working. Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It ... morewould be a pleasure to get your Machine Up and Running Again through this Invaluable Information. This item will be sent to you refurbished like new. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve collected Vintage Manuals for a few years. I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Use the information in these manuals for Operations. Operate, Program, Maintenance, Parts Lists, Examinary Training, Motion Picture for Vintage Images, Instructions, Schematics, Wiring Diagrams, Assemblies, Methods and Ideas of Machining. Please View the Following information. Pictures of the Machine Says A Thousand Words. I will search for your specific Needs Continually. I will allow you to return any information that is of No use to you. Machine Obsolescence! Normal 0 false false false EN-US JA X-NONE DoAll 200S. 200V, Knee Type Milling Machine Operations Maintenance and Parts Manual This Manual Covers Models: 200S 200V This Manual Includes: I.M. Invnentory# D-116SB Specifications Installation Legend Operation Lubrication Preventive Maintenance Maintenance Trouble Shooting Machine Tolerance Electric Circuit Diagram Spare Parts Drawing& Parts List This Manual Has 87 Printed Pages. All Manuals come Spiral Bound with Shop Grade Front and Back Cover. Most Products are Shipped the next day. After Much Consideration. ALL INTERNATIONAL SALES Will Be a Computer Generated.pdf E-Mail.
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company .110 2FL SE REG .010R Carbide End Mill, 65453, Diameter: .110, Number of Flutes: 2, End Style: Corner Radius, Length of Cut: 0.330, ... moreOverall Length: 1.5, Shank Diameter: 0.125, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company 1/2 2FL SE LG 2x4 Carbide End Mill, 62635, Diameter: 1/2, Number of Flutes: 2, End Style: Square End, Length of Cut: 2, Overall Length: ... more4, Shank Diameter: 1/2, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company .010 2FL SE Stub .002R AlTiN Carbide End Mill, 65616, Diameter: .010, Number of Flutes: 2, End Style: Corner Radius, Length of Cut: ... more0.015, Overall Length: 1.5, Shank Diameter: 0.125, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: AlTiN
Buy It Now
$15.00 Shipping Condition: New Location: Rancho Cucamonga, United States
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: This Is a High Quality Turret Vertical Milling Machine Water Pipe, This Bendable Metal Pipe Is Made Of Steel, Which Is Not Easy To ... moreRust And Durable. Features: Color: Silver Length: 700mm Thread: 3/8" Material: Steel Packing Size: 23*16*3cm Gross Weight: 0.6kg Net Weight: 0.4kg The Package Includes: 1X Milling Machine Water Pipe.
Buy It Now
Free Shipping Condition: New Location: Bay Shore, United States
Buy It Now
Free Shipping Condition: New Location: Chino, United States Automatic Bead String Machine Multifunctional Beads Machine With 35/12cm Needle. Spindle speed: 1350r/min. 2 35cm bead needle. 2 12cm bead needle. The ... moremachine is suitable for 4-10mm beads, and the speed of the machine can be adjusted by the speed switch.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Hypertherm Part # AM325-9819.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Hypertherm Part # AM367-1625HCP. For Use With Reference Number: 1572362,L572X.
Buy It Now
$5.40 Shipping Condition: New – Open box Location: Clover, United States (Switch Mounting Kit. properly etc…). We are more than happy to rectify any problems by replacing the item. need to arrange for a lift gate. · Local pick ... moreup. We are happy to. We think good communication ensures a successful.
Buy It Now
$17.95 Shipping Condition: New Location: Beaver Dam, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Warren, United States You are purchasing 2pc of #269-25.
Buy It Now
Free Shipping Condition: Used Location: Bay Shore, United States 7/16-14 Go & NoGo Ring Gages. 7/16-14 NC3 NoGo PD. 3875. 7/16-14 UNC-NC Go PD. 3911.
Buy It Now
Free Shipping Condition: Used Location: Roseburg, United States We do not have any desire to misrepresent. If you should get an item that does not work.
Buy It Now
Free Shipping Condition: New Location: San Leandro, United States
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company 1/8 2FL SE X/LG BN 1x3 Carbide End Mill, 63782, Diameter: 1/8, Number of Flutes: 2, End Style: BallNose, Length of Cut: 1, Overall ... moreLength: 3, Shank Diameter: 1/8, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated
Buy It Now
$14.95 Shipping Condition: New Location: Beaver Dam, United States
Buy It Now
$5.40 Shipping Condition: Used Location: Imlay City, United States Morse Tools.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Hypertherm Part # CN306-3013. For Use With.
Buy It Now
Free Shipping Condition: Used Location: Bay Shore, United States (5) NEW Seco 16NR 20UN CP50 Inserts.
Buy It Now
$15.95 Shipping Condition: New Location: Beaver Dam, United States
Buy It Now
Free Shipping Condition: New Location: Dayton, United States
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company 11/64 2FL SE REG BN AlTiN Carbide End Mill, 63125, Diameter: 11/64, Number of Flutes: 2, End Style: BallNose, Length of Cut: 9/16, ... moreOverall Length: 2, Shank Diameter: 3/16, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: AlTiN
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company 7/16 3FL SE REG TiCN Carbide End Mill, 61802, Diameter: 7/16, Number of Flutes: 3, End Style: Square End, Length of Cut: 1, Overall ... moreLength: 2-3/4, Shank Diameter: 7/16, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: TiCN
Buy It Now
$6.00 Shipping Condition: New Location: Arlington, United States Subject to prior sale.
Buy It Now
$7.90 Shipping Condition: New Location: Colorado Springs, United States Monster Tool Company 1.5mm 2FL SE REG (5mm LOC) Carbide End Mill, 61319, Diameter: 1.5, Number of Flutes: 2, End Style: Square End, Length of Cut: 5.0, ... moreOverall Length: 39.0, Shank Diameter: 3.0, Helix: 30-Degree, Right Hand Cut, Material Base: Carbide, Finish / Coating: Uncoated
Buy It Now
Free Shipping Condition: New Location: Winona, United States Hypertherm Part # AM367-6791CP. For Use With.
Buy It Now
Free Shipping Condition: New Location: China 1PC FIT FOR GD-18 Special bulb for flame detector P578.61 photosensitive tube
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Engine model: 4HK1 4 HOSES.
|
|
|
|
Used Filter Press! Durco Model E26481 8 CU. FT. 800MM Press
Durco. Model E26481 8 Cu. Ft. used filter press(17) 800 mm non-gasketed polypro plates(1) 3’ center feed. 4) 1.5’corner discharge Automatic pneumatic hydraulic closure and release Hanging semi-automatic plate shifter Max feed pressure of 100 PSI Control panel to control hydraulic functions of filter press 32 mm cake thickness Overall Dimensions: 124’ L x 45’ W x 76’ H. SOLD AS IS WHERE IS! Price Reconditioned with(17) 800 mm non-gasketed polypro plates: $19.000.00 Price Reconditioned with(17) 800 mm gasketed polypro plates: $24.000.00 Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with ... moretwo-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to change due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remai
|
|
|
Filter Press Used. Sperry 30 CU. FT. 930MM Press
Sperry 30 cu. ft. used filter press(30) 930mm non gasketed polypro plates 32mm cake thickness Center feed with two corner return Has hydraulic cylinder Missing pump Overall Dimensions: 160” L x 51” W x 62” T SOLD AS IS WHERE IS! Price Reconditioned with(30) 930mm non gasketed polypro plates: $30.000.00(includes pump) Price Reconditioned with(30) 930mm gasketed polypro plates: $40.000.00(includes pump) Filter Press Reconditioning includes: The Filter press will be stripped completely. The Frame will then be sandblasted to remove lose paint and material. All parts are inspected; non-working parts are replaced with new/reconditioned parts. New filter cloth and gasketing for filter plates. Frame is coated with two-part epoxy paint. Reconditioned items come standard with a 30 day warranty on all parts. Lead Time: 3-6 weeks(Lead time subject to ... morechange due to facilities work load) All serious offers will be considered! For more information on new or used equipment see our website http:wwe-co.com/used-filter-presses/ Or call 440.542.0972 and ask for Sam. TERMS AND CONDITIONS 1. With respect to drawings. Data and quotations, Water and Wastewater Equipment Company expressly reserves its right of ownership. The confidentiality of these items cannot be compromised, duplicated, or copied without written consent from Water and Wastewater Equipment Company. 2. Unless reduced in writing and accepted by Water and Wastewater Equipment Company. No modifications of these terms and conditions shall be of any force of effect. The quotation shall deem to incorporate, without exception, all terms and conditions contained herein. No modifications shall be effected by Water and Wastewater Equipment Company’s acknowledgment or acceptance of the Owner’s Purchase Order Form, which may contain different terms and conditions. 3. The ownership and title of equipment and materials shall remain vested in Water and Wastewater Equipment Company’s corporation until Owner has made payments in full within terms of the agreement. Upon fail
|
|
|
NILSON Model #0-F Wire Forming Four Slide Machine 1/16 Wire - 5T
You are bidding on: Nilson Model: 0-F Fourslide Wire Forming Machine 1/16 Diameter New: 1970 Serial no: 89761 If you Need this Machine to be Shipped please contact us before Bidding. Sales Tax: A 8.00% sales tax is applied to all orders shipped to California You can contact me at: 818) 441 8941 if you have any questions. I really appreciate your bids. CLICK HERE TO SEE OUR OTHER GREAT AUCTIONS
|
|
|
Chassis Maker II CNC turret punch
A pint size precision programmable full CNC 16 station 10 ton turret punch that works on 120v and a compressor. It has casters and can be easily moved. The machine take up about 5'x 6' It will punch 12 gauge. Sheet size is 24" x 48' The graphic software makes programming easy to understand. For the guy or shop who wants it all but does not have the space or 3 phase power. I bought this 13 years ago from the original owner who bought it for a tax right off and did not use it. I did some design work several years ago, and love the machine but don't use it. The machine is in excellent condition, with lots and lots of tooling. I have all the original operating instructions and manuals and software.
|
|
|
ALLERAIR FILTER/PURIFIER, WITH A FILTER PAK FOR LAZER CUTTING/ENGRAVING.
CONDITION; USED; MINT CONDITION. FROM A SCHOOL LAB SHOP. USED JUST FOR DEMO ONLY. ALLERAIR CO. FILTER.PURIFIER MODEL; 6000LXDX. FOR LAZER. CUTTING AND ENGRAVING. CFM; 400 FREE FLOW. 6" INLET CONNECTION. SPEED; VARIABLE. VOLTAGE; 110 VOLTS. SIZE; 15" DIA x 25" TALL. ON CASTERS. HAS A FILTER PAK INSTALLED WHICH IS VERY CLEAN. AND I AM INCLUDING A SPARE BRAND NEW HEPA-CHARCOAL FILTER STILL IN THE BOX. NEW PRICE OF THIS UNIT APPROX. $1499.99. PLUS $275.00 FOR THE SPARE FILTER. LOOK AND BID WITH CONFIDENCE. MY GOAL IS TO MAKE EVERY SALE A POSITIVE ONE. FEEL FREE TO ASK QUESTIONS AND THANKS FOR LOOKING. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
RV-1200, LEBLOND SLIDING GAP BED LATHE 16" x 120". 20" 4-JAW CHUCK. 1-7/8" HOLE.
LEBLOND SLIDING GAP BED LATHE 16" x 120" 20" 4-JAW CHUCK. 1-7/8" HOLE. Specifications Brand: LEBLOND, Condition: USED. AS-IS" Model: Part# Serial: Power Rating: 8-1.010 RPM, Weight: 8.300 LBS. Category: LATHES, ERC# RV-1200, Job# 000, Location: X-FLOOR, Additional Notes: 20" 4-JAW CHUCK- TAILSTOCK. 1-7/8" HOLE THRU, Payment Shipping All items are shipped out United Postal Service(UPS) Price is based upon weight and location. We can ship to a PO Box. With US Postal rates applying. To determine shipping charges there is a UPS ground shipping calculator attached to our auctions. ERC can ship UPS to Canada and any other International location with the buyer being responsible for all customs and International fees applying. Items over UPS weight and size restrictions will be sent via common carrier. The customer ... moreis responsible for the freight charge. Unloading of the freight and/or picking up the freight at the terminal if possible. ERC will work with the customer in trying to find the most cost effective way of shipping. ERC does not setup shipping via common carrier overseas. We can provide a shipping quote to Canada and Mexico. However, we will load your item via common carrier international with you, as a buyer, setting up shipping. The buyer is responsible for any damages to the item once the item leaves our warhouse. All of our items are packaged in new boxes and are prepared for any conditions the shipping company offers. If you would like a special request for our packaging department, please let us know so we can fulfill your request. If you need a shipping quote. Please send us a message asking for a shipping quote with the item it pertains to. We will need your destination zip code, city, state, if you have a commercial or residential address, and if you have a forklift. If you would like to setup your own shipping or receive your own quote, our zip code is 44094. Customer Service We pride ourselves on being a leader in customer service. We have developed positive relation
|
|
|
Haas Toellner Parts Loader VF-2SS Parts Loader Year 2003
Haas Toellner Parts Loader VF-2SS Parts Loader Year 2003( two available. But, this auction is only for one) overall dimensions 5' 4" long x 4' 6" wide Feel free to contact me for more photos or to dicker and deal Please note: This machine is being marketed outside of Ebay and is subject to prior sale. All machines are sold in"as is condition no warranty" FOB Michigan. If the machine is not picked up after 30 days after payment it will be considered abandoned and become property of Affordable Machinery to dispose at our discretion. Funds must clear my account prior to shipment. If Crating or Palletizing is required for shipping there will be additional fee.
|
|
|
SC-315, SCHAERER 24" x 120" BED LATHE. 2-3/8" HOLE. 20" 4 JAW CHUCK. 9-1,800 RPM
SCHAERER 24" x 120" BED LATHE. 2-3/8" HOLE. 20" 4 JAW CHUCK. 9-1.800 RPM. Specifications Brand: SCHAERER, Condition: USED. AS-IS" Model: Part# Serial: Power Rating: 9-1.800 RPM ON SPINDLE, Weight: APPROXIMATELY 8.000 LBS. Category: LATHES, ERC# SC-315, Job# 000, Location: X-FLOOR, Additional Notes: U.S. METRIC THREADING- 2-3/8" HOLE THRU- TAILSTOCK. COMES W/ 20" 4 JAW CHUCK- STEADY REST, Payment Shipping All items are shipped out United Postal Service(UPS) Price is based upon weight and location. We can ship to a PO Box. With US Postal rates applying. To determine shipping charges there is a UPS ground shipping calculator attached to our auctions. ERC can ship UPS to Canada and any other International location with the buyer being responsible for all customs and International fees applying. Items over UPS ... moreweight and size restrictions will be sent via common carrier. The customer is responsible for the freight charge. Unloading of the freight and/or picking up the freight at the terminal if possible. ERC will work with the customer in trying to find the most cost effective way of shipping. ERC does not setup shipping via common carrier overseas. We can provide a shipping quote to Canada and Mexico. However, we will load your item via common carrier international with you, as a buyer, setting up shipping. The buyer is responsible for any damages to the item once the item leaves our warhouse. All of our items are packaged in new boxes and are prepared for any conditions the shipping company offers. If you would like a special request for our packaging department, please let us know so we can fulfill your request. If you need a shipping quote. Please send us a message asking for a shipping quote with the item it pertains to. We will need your destination zip code, city, state, if you have a commercial or residential address, and if you have a forklift. If you would like to setup your own shipping or receive your own quote, our zip code is 44094. Customer Service We pride ourselves o
|
|
|
HAAS SERVO CONTROLER! NEEDS SOLDER IN FUSE TO WORK!
SELLING 1 HAAS#35 SERVO CONTROLER! NEEDS A SOLDER IN FUSE TO WORK! FUSE COST UNDER 5 DOLLARS! $38.27 SHIPPING IN U.S. ONLY! NO ISLANDS! WILL NOT SHIP OUTSIDE U.S. IF I FIX THE FUSE THE PRICE DOUBLES! HAS LARGER THEN STOCK FAN! VERY CLEAN MACHINE! g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14b33f74f03-0x105-
|
|
|
LVD 12 mm x 10' Shear
1/2" x 10' LVD Shear. This shear is actually a hair under 1/2" it is a 12mm shear. Cuts 3/8" A36 and 1/4" stainless steel. It is under power and ready for inspection. It has a 1 meter power back guage. I can load it if you pay the buy it now price. It is priced to move. $3000 due within 24 hours. Balance due by Wire transfer prior to loading. Lee 817-475-1575
|
|
|
YUASA ROTARY AXIS 4th Table Nice SPDX-6F
1.5" through bore(without top plate installed) Large Fanuc AC servo under the cover. Pneumatic brake. All pins on amphenol connectors look excellent. Very nice.Japanese quality. No international shipping on this. Local pick-up encouraged. Freight is buyers responsibility. Crating and drop off at local freight terminal is included in price.
|
|
|
ATS Workholding Collet Chuck for Mazak QT6
This is a special dynamically balanced 115mm-5C pullback collet chuck for a Mazak T6T. QT6G or QT6N. Drawing available for preview prior to bidding. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14b340ed3a9-0x114-
|
|
|
Problast Media Blaster
2008 Problast Media Blasting Pot. this unit can blast any type off media there is anything from baking soda to sand. less than 40 hrs on it since new. can hold 100 pounds of media. comes with electric air cooler. Primary water separator 50 ft of air supply hose and 50 ft of Blast Hose. pot is controlled by dead man switch. Nice unit. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14b340ed3f6-0x104-
|
|
|
Moloch, Mayer (Little Giant) 100 LB Power Hammer
RARE FIND- Moloch. Mayer(Little Giant) 100 LB Power Hammer No. P897 32" Fly Wheel that is typically found on a 500 LB MODEL. Overall everything is in good working condition. Well maintained, custom dies. Nothing is broken&or damaged but it may need some TLC, tuning up&or adjustments. 7.5 HP. 1760 RPM, 3 Phase General Electric Motor See attached photos for more details. We are moving to a new facility and can't bring this incredible machine with us. It is very difficult to find a Little Giant Power Hammer in general. But very rare to find one in this good of working condition and fitted with a specialty motor and flywheel. Preliminary Specifications- Subject to Verification Purchasing Information: There is a chance that this item may sell locally at our facility before we take it down from Ebay. Please verify it’s availability ... morebefore purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include Pay Pal. Wire transfer, and certified check Freight and Shipping: The machine is located in Chicago. IL(60614) There is no charge to load onto buyer's truck Local Pick Up Preferred Shipping costs to buyer location are not included with the machine. Buyer works directly with the shipper. Crating/Palletizing is not included with the sale price.
|
|
|
Mayfran Consep 2000 Chip Conveyor for a Mazak VCN510CII
Very nice Mayfran Consep 2000 Chip Conveyor. Slightly used from 12/1/12- 3/19/13. Removed from a Mazak VCN510CII machine. Please email with any questions and for a drawing to confirm this will fit your machine prior to bidding. You are bidding on the chip conveyor unit only and does not include interface. Warranty, manuals, installation or freight. This is a great chip conveyor for the price. Sold new for over $20,000.00. Buyer arranges and pays for freight once the transaction has been completed. 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14b340ed409-0x107-
|
|
|
JET HORIZONTAL METAL CUTTING BANDSAW. 16in. Capacity 2hp/3phs
Jet HBS-10M 16" Horizontal Industrial Metal Cutting Bandsaw 2hp/3phase. Cutting Capacity 16" width x 14" heigth. Carbide blade guides hold blade firmly in place. Hydraulic Feed. Adjustable Speed. Coolant resevoire built into base. Made in Japan. In good working condition. New blade($50.00 value) Harbor Freight offers one that is a quarter of the size for about the same money. Its not pretty. But it is a great machine. Dimensions are: 92" wide, 36"deep, 40" tall Weight: approximately 500 to 700 lbs. Feel free to call with questions. Dennis 504-339-9926
|
|
|
Erco 476 Power Shrinker Stretcher NEW LOW PRICE!!
Used erco 476 shrinker stretcher. Has shrinking jaws only. Runs flawless. I have video of it running in both speeds i can send to anyone interested. I have the belt cover as well(not pictured) Machine is from overseas and runs 480 volt and 50cycles. I haven't actually looked at the motor to see if it can be wired down in voltage. Message me or call for any info. Thanks Jordan. 217-621-3052
|
|
|
Sterling Speed-Trol Gear Reduction Unit
Sterling“speed- trol” variable speed drive for 2 HP motor 31.38 ratio Model# 499-1345-1 Frame# 184T-E72-23C Max rpm 91. Min rpm 9.1. Appears new in original box or possible refurbished item still in original packaging. Item sold as is. Feel free to ask any questions if needed.
|
|
|
Allen Bradley Co. Milwaukee buttons and patch
This is a group of 3 items from the Allen Bradley Company in Milwaukee. They probably date from the 1950's. Though they could be 40's or possibly early 60's. The first item is a yellow pin-back button. My guess is that this is an employee ID badge. As there's a window in the middle. The second item is a black. White, and green pin-back button. The third is a green and yellow patch. The green design appears to be applique of some sort-it's not embroidered. All 3 items are in pretty good shape. The fronts aren't scratched and the slight discoloring on the back doesn't appear to be rust. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14b340ed380-0x116-
|
|
|
6 Inch Washington State Shape Rough Rusty Metal Vintage Stencil Ornament Magnet
This is for the state of Washington shape. Measures about 6 inches across. Rusty. Vintage, antique-y metal state. Would be great for any arts and crafts project, signs, or stencils! Paypal only. Will combine shipping. Wholesale pricing available for bulk purchases, please message me for details. I can make pretty much any state shape if you are interested! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14b340ed45b-0x115-
|
|
|
6 Inch California State Shape Rough Rusty Metal Vintage Stencil Ornament Magnet
This is for the state of California shape. Measures about 6 inches in height. Rusty. Vintage, antique-y metal state. Would be great for any arts and crafts project, signs, or stencils! Paypal only. Will combine shipping. Wholesale pricing available for bulk purchases, please message me for details. I can make pretty much any state shape if you are interested!
|
|
|
BULK LOT of 10 Number Sets 1.5" Rusty Metal Vintage Western 0 1 2 3 4 5 6 7 8 9
This is for 10 complete sets of numbers 0-9. Each number measures 1.5 inches in height. Rusty. Vintage, antique-y western style metal numbers. Would be great for any arts and crafts project, signs, or stencils! Paypal only. Will combine shipping. Wholesale pricing is available, please message me for details. NOTE: Ebay automatically sends out invoices after an item has finished. But they may not include all of your possible savings. To optimize your combined shipping discounts. PLEASE contact me before paying for multiple items, and I will send you a customized invoice. As the weight for every item varies, Ebay does not accurately combine shipping. I can send you a customized invoice that will maximize your savings, and I can let you know when it's ready. Please feel free to contact me with any questions. Thanks for looking!
|
|
|
6 Inch Missouri State Shape Rough Rusty Metal Vintage Stencil Ornament Magnet
This is for the state of Missouri shape. Measures about 6 inches across. Rusty. Vintage, antique-y metal state. Would be great for any arts and crafts project, signs, or stencils! Paypal only. Will combine shipping. Wholesale pricing available for bulk purchases, please message me for details. I can make pretty much any state shape if you are interested!
|
|
|
6 Inch Florida State Shape Rough Rusty Metal Vintage Stencil Ornament Magnet
This is for the state of Florida shape. Measures about 6 inches across. Rusty. Vintage, antique-y metal state. Would be great for any arts and crafts project, signs, or stencils! Paypal only. Will combine shipping. Wholesale pricing available for bulk purchases, please message me for details. I can make pretty much any state shape if you are interested!
|
|
|
Kearney & Trecker Milwaukee Mill Catalog mint. Picture heavy vertical Milling
Here is a Catalog from the West Allis based Kearney& Trecker Corporation. Looks to be about 100 pages. It presents as new but for some minor cover wear in the corners. Printed in 1942 when the Milwaukee region was the machine tool capitol of the world. The pages are of very high quality and are heavy with outstanding photos& graphics as Milwaukee has long been the printing capitol of the world. This is really a celebration of the machines that helped win the war and our Navy ships were full Milwaukee Mills. It is amazing to think of how many of these are at the bottom of the world's Oceans. I know the area's High School shops were full of this equipment in the 60's-90's. In some of the photos. You can see the Allis Chalmers factory across the street as well as Pressed Steel Tank. Just a great old piece.
|
|
|
Paper drill Uchida Densys 3 hole with 150 drills
one) Paper drill. Uchida, model SA-5, ¾ kW drill motor, ¾ kW clamp motor, 220 vac, 3 phase. This is a 5 spindle machine but has only 3 installed. We have the other two spindles but I am not sure if they are complete. Approx. 150) spare drills. Includes drill sharpener, owners manual, footswitch, drill lubricant. 300mm maximum span. $375 shipping in the continental U.S. D-12285, 86, 87, 88, 89 If you have any questions. Please email me! Happy bidding! Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Shipping& Handling US Shipping. $375.00 truck International Shipping. $2200.00 by air to airport FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Click Here. Double your traffic. ... moreGet Vendio Gallery- Now FREE!
|
|
|
Artos CS-6 wire cut and strip machine
one) Wire strip and cut machine. Artos CS-6, s/n 37410. With Festoon reel, 5) cams and various cut-off tools. 110 vac. We ran this thru a small test and it seemed to work ok. Range listed is 2" thru 190" $375 shipping in the continental U.S. You can send text messages to my cell phone at 9374165497@vtext.com D-12274, 75, 76, 77, 78, 79, 80 If you have any questions. Please email me! Happy bidding! Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Shipping& Handling US Shipping. $375.00 truck International Shipping. $2100.00 by air to airport FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Click ... moreHere. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|
Challenge EH3 , 3 hole drill hydraulic clamp
one) Challenge 3 hole drill. Model EH3, s/n 27163, hydraulic clamp. Powers up and drills. With drills and tools. 110/220 vac single phase. $275 shipping in the continental U.S. D-12281, 82, 83, 84,90 If you have any questions. Please email me! Happy bidding! Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Shipping& Handling US Shipping. $275.00 truck International Shipping. $1875.00 by air to airport FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|
Vintage Steel Glass Tate Jones Threaded Industrial Blast Gate Observation Port
Vintage. Used, metal, steel, glass, yellow, 1954 WF, Tate Jones Co. threaded, industrial, safety, blast gate observation port, lens. This item shows overall wear including scratches found throughout. Fading to the paint, chipped and missing paint, discoloration found throughout, staining found, and this item may be missing pieces. Marked. Tate Jones Co. on both sides. This item is a blast gate observation port and the current comparable model is a 3bgop. This item measures approximately 5” x 4.75” x 11.125” at its largest dimensions. Including the top hook. Please see pictures for more details. Normal 0 false false false EN-US X-NONE X-NONE On Nov-05-12 at 09:23:08 PST. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
Biessework program with two dongles and manual book.
Manual book is in good condition. The program never been intalled.two dongles for 2 computer are new biessework 2.1
|
|
|
14 Stand Lockformer Duplex Panel Roll Former (22 ga.)
14 Stand Lockformer Duplex Panel Roll Former 14 STAND LOCKFORMER DUPLEX PANEL ROLL FORMER Capacity: 22 gauge Number of forming stands: 14 Shaft diameter: 1-1/2" Roll space: 6" 72" adjustable) Vertical centerline distance: 3-1/2" Speeds approx. 120 FPM EQUIPPED WITH: Pushbuttons for start- stop Drum switch for forward- off- reverse 10 HP 875 RPM 230/460/3/60 motor Overall dimensions approx. 149" L-R x 138" F-B x 50" H*Currently 12 Stands on One Side* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We are a 3rd generation family owned business that has been in business for over 50 years! Will Consider BEST OFFERS! Bid with confidence! Returns accepted-Freight pre-paid within 30 days! This machine will be loaded free of charge and sold F.O.B. Truck! Arrangements ... morefor item removal must be made promptly after purchase! Extended storage is sometimes possible with an appropriate deposit! Prices do not include freight or applicable sales tax! For serious inquiries contact Amanda@ 847-847-4278 Check out my other items!
|
|
|
4 Ton Diacro Turret Punch Press
4 Ton. DIACRO Turret Punch Press. Model: 12- 12 Stations Tonnage: 4 Tons Max. Punch Diameter: 2" Clearance btwn Dies& Stripping Surface: 7/16" Stroke Ram: 5/8" Work Height: 47" Equipped With: Hand Lever for Operation. Mounted on 37" Factory Table Weight: 500 Dimensions: 38"x42"x73" Serial# BD2168 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We are a 3rd generation family owned business that has been in business for over 50 years! Will Consider BEST OFFERS! Bid with confidence! Returns accepted-Freight pre-paid within 30 days! This machine will be loaded free of charge and sold F.O.B. Truck! Arrangements for item removal must be made promptly after purchase! Extended storage is sometimes possible with an appropriate deposit! Prices do not ... moreinclude freight or applicable sales tax! For serious inquiries contact Amanda@ 847-847-4278 Check out my other items!
|
|
|
OMERA 50 ton IRONWORKER Shear, Punch, Notch, MORE
Omera Multimatic 13 50 TON Ironworker UNIT IS WORKING CONDITION. Comes with Dies seen in picture. Unit is 3 Phase Multi Tap so you choose voltage. Capacity: Angle- 4"x3/8" Shear- 1/2" Plate Notch- 3/8" Plate Punch- 1/2" Thick Dies. Blades Etc are Available to purchase! Uses 221 Die 417 Punch which are available in MANY vendors. I have a forklift on site and will be more than happy to help load. Unit has about 20" +/ of SO cord that will come with unit. Unit has a NEW disconnect/motor starter that is ON/OFF right at unit. I also replaced both foot switches with brand new units last year. This thing is ready to work! Jeremy 317-468-8065 for Questions Deposit via Paypal- Cash in hand or cashiers check please
|
|
|
35 Ton Overhead Bridge Crane
Zenar Overhead Bridge Crane Capacity: 35 Tons, Span: 100' 6" Pennent Controlled, Year: 1996 Hoist Speed: 15 FPM, Trolley Speed: 132 FPM, Bridge Speed: 207 FPM, Power Supply: 480/3/60, Sold On Site, Please note: This machine is being marketed outside of Ebay and is subject to prior sale. All machines are sold in"as is condition no warranty" Unless otherwise pre-arranged in writing. If the machine is not picked up after 30 days it will be considered abandoned and become property of Affordable Machinery to dispose at our discretion.
|
|
|
Mazak Horizontal Machining Center - Model H-25N Type B
Model H-25N Type B. Serial Number 63108. X axis 60” Y axis 42.1”Z axis 31.5, Two Pallet System-31.5” Square,3,500 Lbs. Pallet Capacity 25 H.P. AC Spindle Motor#50 Cat Taper, Programmable speed 22-4000 R.P.M. and.010-200 I.P.M. Feed range, Automatic Tool Measurement, 40 Tool Drum, Mazatrol M-2 Control With 580K Working Memory and 2455K Bubble Memory, Purchased New in 1986. Buyer is responsible for all Rigging and must provide proof of insurance before starting any work Machine is under power and is located in Bloomington. IL.
|
|
|
4ft stomp shear
4ft sheet metal stomp shear good condition
|
|
|
Schmidt Press RF13 05 2006 2 of 3
Schmidt P ress RF13 05 20 06 Hey guys here is an excellent small press with micrometer adjustment.This can cure any"pressing" problems you may have. Can ship any where! Thank you for your business! God Bless!
|
|
|
rocklinizer carbide bonding machine model 600.
Rocklinizer Model 600 600/ 600E- Deposits from.0001" to.004" in a single application. Controllable within.0001" by machine dial setting. Approximately 49 lbs. 22.3 kg. Model 600 Applicator is automatically triggered when electrode is placed in contact with work piece. Or manually triggered by the operator. WE fired this thing up and when you pull the trigger it makes a vibration and sparks when you put it against metal. Thank you for your Business! Shipping will be 40.00 God Bless!
|
|
|
Pullmax p6 metal nibbler fabrication machine cars hot rods
Pullmax P6 Nibbler Hi Guys this is machine for your shop seems like these are getting scarce or at least harder to find. This is a solid machine is in good condition we do have a few pieces of tooling. This machine is a nice machine I will load a video for you to see it running. As you can see this one could use a good cleaning and the opposite side has some studs that were welded on and a few spots where a box was removed many paint these we have some customers show some amazing after pictures.I love it when you send back pics of the machines after you get done with making them worthy of being in your shops. We can ship anywhere! Thank you for your business! God Bless!
|
|
|
Sheffield Balljet Spindle Kit
This Kit is missing parts. The parts that are left look new and not used. I really don't know what this kit is used for. I recieved it along with some other parts. It does have some paperwork about size ranges. Covers sizes 1" to 3" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14b3ac48a30-0x107-
|
|
|
2008 Haco Synchromaster 45 Ton x 6' Press Brake w NonWorking 4 Axis CNC Control
Used 2008 Haco Atlantic SynchroMaster 45-6 CNC Press Brake: Equipped with Haco ATS-6000 4 Axis Backgauge Control. Currently not working and that is why customer is selling the machine. Electronic controlled ram synchro system w/ servo-hydraulic valves. Automatic compensation of the side frame deflection by table referenced linear scales. Connected w/ the ram SYNCHRO-system- Pendant control panel with Robosoft ATS 560 CNC control- X-axis: backgauge with 0.004" positioning accuracy- Y1/Y2 ram axes positioning. 0.0004" accuracy- Programmable pressure. Ram stroke and ram opening height- Programmable speed change point- Automatic full cycle of the ram- 31" CNC controlled backgauge on high precision ballscrews.Including 2 universal fingerblocks, manually adjustable in width and height- Ram and table machined to use American style ... moretooling. Operation. Programming and maintenance manual. Foot pedal control d- Full oiltank SPECIFICATIONS: Max Capacity 45 Tons Working Length 82" Distance between housings 63" Fast Approach Speed 189 IPM Max Working Speed 24 IPM Fast Return Speed 165 IPM Motor 5-1/2 hp Ram Stroke 3.9" Gap 7.6" Daylight Opening 11" Table Height 34" Dimensions: 90" x 97" x 57" H x L x W) Weight 6.600 lbs. The ATS 6000 is a high-end 4-axis control. Designed for making press brake production easier, faster and more reliable. Thanks to the user-friendly interface. The programming of a press brake is no longer complicated. With a memory of over 1000 programs and extensive material- and tool libraries. This control is ideal for the production of many different series. Standard features* 10" color TFT display* DC single axis back gauge control* Depth axis servo system for direct servo valve control* Incorporated proportional valve drive* Automatic or manual* Programmable limits* ± 1000 programs* Absolute or incremental back gauge positioning* Automatic calculation of needed force or pressure* Multiple control methods(CE only) selectable on the cont
|
|
|
2010 AccurPress 25 Ton x 4' Press Brake w 2 Axis CNC Control, STI Light Curtains
Used 2010 AccurPress Model 7254 Hydraulic Press Brake: Specifications: Capacity: 25 Ton, Overal Length of Bed& Ram: 51" Distance Between Housings: 51" Stroke(Adjustable) 6" Max. Open Height: 12" Closed Height: 6" Throat Depth: 5-3/4" Bed Height: 34" Speeds: 200 IPM 28 IPM(Pressing) 300 IPM(Return) Flush Floor Design Dimensions: 62" L x 43" D x 66" H; 5000 lbs. Equipped with: ETS 200 P4 Premium Backgauge w 2 Axis CNC Control(Progammable Logic Control) Foot Pedestal Control with Palm Button STI Light curtains Lower Die Rail(Upper Punch pictured doesnt come with the machine) Brand new this package would go for $50.000+! Great Deal so Buy Today! Machine is very clean and in good working condition. In Plant. Under Power. Video of machine running can be taken upon request. Demos available upon ... morerequest as well. Buyer is Responsible for Freight& Rigging FOB: Casa Grande. AZ 85122. Machine is Sold"As-Is. Where-Is" with No Warranty Expressed or Implied. Buyer is Responsible for machine inspection prior to shipment. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14b3ac4894f-0x110-
|
|
|
NIAGARA MACHINE & TOOL FOLDERS AND BRAKES BULLETIN 74C-SHEET METAL
This is a Niagara Folders and Brakes Bulletin 74C It is in good to very good condition, It has 10 pages. I go to the post office on Monday. Wednesday and Friday for shipping. Shipping and Handling will be $5.00 No International Shipping I do not refund. I accept Paypal. Thank you for looking at my items.
|
|
|
NIAGARA MACHINE & TOOL PRESS BRAKE DIES BULLETIN 92-L-SHEET METAL
This is a Niagara Hand Tools Press Brake Dies. Tufloy and Urethane Bulletin 92-L It is in good to very good condition, It has 12 pages. I go to the post office on Monday. Wednesday and Friday for shipping. Shipping and Handling will be $5.00 No International Shipping I do not refund. I accept Paypal. Thank you for looking at my items.
|
|
|
CHICAGO DREIS & KRUMP HAND-POWER LEAF BRAKES SERVICE BULLETIN GC2-81-SHEET METAL
This is a Chicago Dreis& Krump Hand Brakes. Power Leaf Brakes, Speedibender, Press Brakes Bulletin GC2-81 It is in good to very good condition, It has 12 pages. I go to the post office on Monday. Wednesday and Friday for shipping. Shipping and Handling will be $5.00 No International Shipping I do not refund. I accept Paypal. Thank you for looking at my items.
|
|
|
CHICAGO DREIS & KRUMP PROFIT PROFILES IN HAND BRAKES BULLETIN HB-66-SHEET METAL
This is a Chicago Dreis& Krump Profit Profiles in Hand Brakes Bulletin HB-66 It is in good to very good condition, It has 16 pages. I go to the post office on Monday. Wednesday and Friday for shipping. Shipping and Handling will be $5.00 No International Shipping I do not refund. I accept Paypal. Thank you for looking at my items. 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14b3ac6a224-0x111-
|
|
|
PEXTO HYDRAULIC PRESS BRAKES CATALOG NO. HY-7315- SHEET METAL
This is a Pexto Hydraulic Press Brakes Catalog No. HY-7315 It is in good to very good condition, It has 8 pages. I go to the post office on Monday. Wednesday and Friday for shipping. Shipping and Handling will be $5.00 No International Shipping I do not refund. I accept Paypal. Thank you for looking at my items. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14b3ac6a266-0x10f-
|
|
|
DI-ACRO PRESS BRAKE DIES CATALOG No. 100-SHEET METAL
This is a Di-Acro Press Brake Dies Catalog No. 100 It is in good to very good condition, It has 16 pages. I go to the post office on Monday. Wednesday and Friday for shipping. Shipping and Handling will be $5.00 No International Shipping I do not refund. I accept Paypal. Thank you for looking at my items.
|
|
|
Mittler Brothers 6ft Sheet Metal Brake
Mittler Brothers 6ft sheet metal brake. Comes with Mittler Brothers castor wheel kit and radius bar. About a year old. Used to bend 2 race car bodies. From Mittler Brothers website: Features The MB 22 Gauge Brake is designed for race car body fabrication. This design is not only economical. But also includes some of the same quality features of our Ultimate Box& Pan Brake. The 96” Model Includes 1/2” Upper Radius Bar. The Upper Radius Bar is optional on the 72” Model. mounting holes are pre drilled in 72” brake) Specifications• Precision Machined Cam• Bronze Bearing with Steel Pivot Pin• Wrenchless Upper Adjustments• Legs Included Max Capacity: 22 Ga(030” Mild Steel 18 Ga(040” Aluminum
|
|
|
Hyd-Mech H-14 14'' x 14'' Automatic Horizontal Band Saw
MANUFACTURER: Hyd-Mech MODEL: H-14 S/N: 50390009 CAPACITY: 14” diameter. 14” square BLADE SIZE: 1– ½” BLADE MOTOR: 10 HP POWER REQUIREMENTS: 240V/3ph/60cyc*Specifications subject to verification
|
|
|
Falcon HV-20 Manual Horizontal Band Saw
Used horizontal metal cutting bandsaw with extra blade.
|
|
|
Amada HFA-250W Automatic Horizontal Band Saw (1995)
SPECIFICATIONS Capacity: Round: 10" Square: 10" x 11" Rectange: 6.8" x 11.8" Feed Length: 31.5" Blade Size: 138" x 1" x 0.037" Blade Speed: 262 FPM, Blade Motor: 2.2kW(3/60) Hydraulics Motor: 0.75kW(3/60) Table Load: 3.300 lbs, Table Height: 1.81' Machine Weight: 2.650 lbs, CONTACT MAC-TECH TODAY! Toll Free: 1-888-MAC-9555 Phone: 1-414-486-9700 Fax: 1-414-769-1522 Email: win@mac-tech.com g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14b3ac6a9cb-0x106-
|
|
|
32" x 32" DOALL C-3232M DUAL-COLUMN HEAVY-DUTY HORIZONTAL BAND SAW ~GREAT PRICE~
This saw has been in storage for 3 years. It is priced for quick sale and we will load FREE on your truck, pickup in Pittsburgh, PA 32" x 32" DOALL DUAL-COLUMN HEAVY-DUTY HORIZONTAL BAND SAW Serial No 442-85108. Model C-3232M EQUIPPED WITH: Pedestal-Mounted Control Panel 36" x 23' Power Driven Infeed Conveyor(Hydraulic) 36" x 22' Power Driven Out-Feed Conveyor(Hydraulic) Dual Hydraulic Vises w/Replaceable Jaw& Bed Plates Hydraulic Servocontrolled Gravity Supplied Head Feed Variable Band Speed Adjustment w/Digital Speed Indicator 15 HP Band-Drive Motor 5 HP Separate Hydraulic System Power Driven Saw Band Brush CATALOG SPECIFICATIONS: Round Stock Capacity. Maximum. 32" 810 MM Rectangular Stock Capacity. Maximum. 32" x 32" Rectangular Stock Capacity. Maximum. 810MM x 810MM Band Speed. Infinitely ... moreVariable. 60 to 350 FPM Band Speed. Infinitely Variable. 18 to 107 MMPM Band Length. 304" 7722MM Band Width. 2.625" 67MM Band Thickness. 063" 1.6MM Wheels Diameter. 32" 810MM Drive Motor Horsepower. 15 HP 11.2 KW Hydraulic Motor Horsepower. 5 HP 3.7 kW Saw Dimensions W x D. 168" x 95" Saw Height. Head Raised. 110"
|
|
|
Edge Saw Model 10 Horizontal Band Saw, 48" x 36"
Item Specs: Model 10, Horizontal band saw, type: trim(foam) saw, 48" x 36" capacity, sliding 48" table, s/n: 735S, You will receive an invoice via email or Ebay for the full amount owed. Including shipping. Please do not pay until you have received the invoice. Items not paid within 10 days from the end of an auction will be relisted. Payments by check will be held up to 4 days until the check clears. We can ship by LTL. Partial or full, van or flatbed, double drop, or export container. Freight costs are to be quoted at the time of sale. All freight costs are to be paid by the buyer prior to pickup. Please contact a sales representative for a shipping quote. We ship within 5 business days of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs. ship via UPS ground. Freight ... moremay be booked with any carrier. But usually goes out on the best available. Extra shipping charges: Lift gate truck- Add $128 Residential Delivery- Add $80 If a rigger. A lift gate truck, or a residential delivery is necessary, please notify us prior to quoting shipping. If buyer chooses to use their own freight. Shipping account, and or carrier, they will be responsible for all scheduling, paperwork, claims, and any damages incurred in transit. Local pickup is always welcome. No handling fees apply on local pickup. Any item not picked up within 30 days from the end of an auction will be charged 10% of item(s) cost per month for storage. You are bidding on a used item. Please be sure to ask any and all questions prior to bidding. SOLD AS IS/WHERE IS. We will do our best to answer specific questions but please be aware that the equipment may no longer be located within the original facility and historical information and photos may be limited. Please contact us for return details as they change from listing to listing. For more information. Please call at 860-484-4449. Or email him at bradym@globalmachinebrokers.com
|
|
|
400 Ton HTC / Pacific Hydraulic Press 120" x 54". For compression molding
We have for sale a 1980 HTC/Pacific 400MS Hydraulic Molding Press. The press has a bed measuring 120” x 54” Pacific Press purchased HTC in the 90’s and so parts and support are available through Pacific. The press has been disassembled and moved to our rigger’s warehouse in Batavia. IL and is ready to load. The press and steam platens weigh approximately 113,000 lbs. The press has a stroke of 16” and an open daylight of 28” The close height is 12” We do have a riser block assemble that can reduce the close height. The press has two steam platens installed that cover the entire 120” x 54” bed area. There are steam valves that modulate and temperature control the platens. The ram has a Rapid Advance(IPM) of 114” a press(IPM) of 30” and a return(IPM) of 204” The press is powered by two 30HP hydraulic motors. The hydraulic pumps and main cylinder ... morewere rebuilt in the 90’s. The press has been in storage for approximately 4 years and was used little in the preceding 10 years. The press is controlled by a GE 90-30 plc which was installed in 1992. Winning bidder shall be required to place a deposit of $1,000 within 24 hours of winning the bid. Good luck bidding! g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14b3bac11d8-0x116-
|
|
|
Kent 12'' x 24'' Hydraulic Surface Grinder
USED Kent Surface Grinder for sale from precision machine shop. We purchased the machine brand new in 1997 and have used it in our one-shift machine shop grinding mild steel. Tool steel(O-1, A-2, D-2) 4140, and some aluminum. The grinder is being sold along with the hydraulic power unit and the coolant tank with pump. We took the machine out of commission this summer when we purchased a larger surface grinder, and now we no longer have the floor space to store it. When the grinder was taken off-line in July 2014 it did operate. As you can see from the photos, there is wear on the grinder. And it is being sold as-is, without any warranty and no return privilege. Kent 12 x 24' Surface Grinder with Kanetsu magnetic chuck* Hydraulic power unit* Coolant tank with pump* Acu-Rite Qwikcount digital read-out(DRO) Serial number 759039* Year of ... moremanufacture: 1997 LOADING: We will load the machine without additional cost using our fork-truck and/or overhead crane. You are responsible for the rigging of the machine on the freight truck. DELIVERY/TRANSPORTATION: The Buyer is responsible for all delivery and transportation costs. PAYMENT: We will accept Mastercard and Visa credit cards or check. If payment is by check, the check must clear our bank before the machine can be released from our facility. QUESTIONS: Please call Kent at 517-750-1332 to request additional photos or to ask about machine features.
|
|
|
ironworker spus,bull pins
4 spud wrenches by Klein tools 1-1-5/8.7/8-1-7/16,3/4-1-1/4,3/4-1-1/8. One canada grey c66 slever bar. 4 Klein bull pins. I don't ship outside the United States. 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14b3bac11df-0x101-
|
|
|
stamping press feeders
Rapid Air Model W20P. S/N 98511, approx. 20"x2" wide, front clamping plate missing.
|
|
|
Glass washer, Hot melt butyl machine, CRL, CR laurence
TURN KEY OPPORTUNITY TO ADD TO YOUR BUSINESS OR START A NEW BUSINESS. BE IN CONTROL OF LEAD TIMES AND QUALITY TO PROVIDE BETTER SERVICE TO YOUR CUSTOMERS. ALSO INCLUDED IS APPROXIMATELY $2-3.000.00 OF SPACER AND PARTS TO BUILD IG UNITS LOCATED IN SAN DIEGO.CA.
|
|
|
MODEL NO.2 MOORE, JIG GRINDER, 10 x 19 INCH TABLE, 12,000 - 60,000 RPM.
We are a tool shop in Northwestern Pennsylvania and are selling some of our extra equipment. Check out our! THIS MACHINE IS IN EXCELLENT CONDITION. IT IS UNDER POWER AND CAN BE VIEWED LOCALLY UPON SCHEDULING AN APPOINTMENT. SERIAL NO. 7069. WILL SKID. WRAP AND LOAD ONTO TRUCK. CANNOT GUARANTEE WATER-TIGHT WRAP. General Specificatons As Per Brochure Specifications: Table Size: 10" x 19" Table Travel(longitudinal) 16.5" Table Travel(cross) 10.5" Vert. Distance Table Top To Wheel Collet: 0 to 16" Throat Depth Spindle To Column Ways: 10" Throat Depth Spindle To Column Below Ways: 12.5" Travel Main Spindle Slide: 3.625" Grinding Capacity With Grinding Wheels: 1875" to 5" Angular Adj. Of Spindle. Both Ways: 1.5" Deg. Angular Adj. Of Spindle, Included Angle: 3 Deg. Machine Weight(approx. 3,150lbs ... moreMachine Dimensions(approx. 59"LR) 48"FB) 100"H) BUYER PICK-UP MUST BE SCHEDULED WITH SELLER. BUYER CAN ARRANGE FOR TRUCKING AT BUYER'S EXPENSE. CALL SELLER TO SCHEDULE PICK-UP TIMES. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14b3bac11a0-0x113-
|
|
|
Buendgens Straighten & Cut Machine
Buendgens Straighten& Cut Machine. Model UDS2. S/N 592, New 1970, wire dia. from.5mm to 1.6mm, max. length 5mm, 2 wire machine. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14b3bac112b-0x112-
|
|
|
Schmidt Press 2800 LB 8" Stroke 27-400088
Press works great. You will have to set up your own control. Daylight with the cylinder all the way up is 16" Down is 6" 8" stroke. The base is 10"x8" Comes with a LVDT I didn't test it but the machine was pulled working. Will ship. I'm 10 miles west of Milwaukee if you would like to inspect or pickup. 53151. No warranty but guaranteed not DOA. Jeff 262 227 7774.
|
|
|
CDI TORQUE PRODUCTS 1502 TP-1 20-170 IN. LB USED MACHINIST HAND TOOLS
CDI Torque Products 1502TP-1 20-170 IN. LB. Used- Please see photos. Thanks you for looking at this item. Please take a minute to browse our store to see what other treasures we might have this week. We will combine shipping when beneficial. Be sure to view all pictures and ask any questions before you buy. I try to be very accurate when giving measurements and detailed descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact us immediately. We will do whatever we can to make it right. Here at Bill’s Tools& Used Machinery we offer a Money Back Guarantee NO Questions Asked(well. We might ask why but will not refuse returns) Customer satisfaction is very important to us. We ship Monday thru Friday till 12:00 noon. Any item ... moreordered after noon on Friday will ship Monday morning. WE try very hard to ship all item within 24 hrs of payment received. Florida Residence. I must add a 7% sale tax to item purchased by Florida residences. Note to International buyers…Import duties. Broker fees, taxes and or customs charges are not included in the shipping price. These charges are the buyer’s responsibility: please check with your country’s custom office to find out what these additional charges might be before buying. These charges are collected by delivery companies or when you pick your item up at postal services. Again Thank You for looking Bill& Betty L- 7446 A19 Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
2002 Doosan Puma 230GL CNC Lathe with Gantry System
2002 Doosan Puma 230GL CNC Lathe w/ Gantry System SPECIFICATIONS: Travels: X Axis 8.1" Z Axis 22.8" Bar Capacity 3" Chuck Size 10" Center Distance 30" Swing Over Bed 21.7" Swing Over Saddle 5.4" Max Turning Diameter 11.4" Spindle Nose A2-6" Spindle Speed 3500 RPM Spindle Motor 20HP Turret Capacity 12 Stations Rapid Traverse Rate(X/Z) 945/ 1200 IPM Tailstock Quill Diameter 3" Tailstock Quill Travel 3.15" Machine Dimensions 160" x 66" x 72" Machine Weight 9.500 lbs. EQUIPPED WITH: Fanuc 18i-T Control Doosan Model GL Gantry Loading System with Overhead Loading Gantry Arm Carousel Type Parts/ Tool Table Shaft Gripper Attachment for Loading and Unloading Long Parts 10" Three Jaw Hydraulic Chuck Tool Pre-Setter Programmable Tailstock Chip Conveyor $42.900 Located in FARLEY. ... moreIA CNCMachines.Net Michael@cncmachines.net 844-262-6789 WWW.CNCMACHINES.NET Please contact Michael Ford 844.262.6789 with any questions or concerns. WE are NOT a transportation company. We are NOT equipped to properly rig this item. We do have experience in helping hundreds of our customers finding the right sources and assist in helping them through the process of preparing. Rigging and shipping to their facility. CNCMachines.Net has the right to resell the item if not paid in full, all items are subject to prior sale. TERMS& CONDITIONS: The following terms and conditions(these"Terms and Conditions" are agreed to by CNCMachines.Net(CMN” and the purchaser(Purchaser" CMN's acceptance of any order is subject to these Terms and Conditions. No contrary. Additional or different terms, provisions or conditions shall be binding on CMN unless accepted by CNC in writing. 1. PAYMENT TERMS: Purchaser must pay purchase price in full prior to shipment. Terms of payment are net cash in United States dollars. Prior to shipment, to CMN's place of business, unless otherwise specified on the accompanying"quote/invoice" form. Purchaser shall pay CNCMachines.
|
|
|
2000 Doosan Puma 300GL CNC Lathe with Gantry System
2000 Doosan Puma 300GL CNC Lathe w/ Gantry System SPECIFICATIONS: Travels: X Axis 10.2" Z Axis 24" Bar Capacity 4" Chuck Size 12" Center Distance 38" Max Swing 23.2" Max Turning Diameter 15.7" Max Shaft Length 24.8" Spindle Bore Diameter 4.53" Spindle Nose A2-11" Spindle Speed 2800 RPM Spindle Motor 35HP Turret Capacity 12 Station Rapid Traverse Rate(X/Z) 480/ 630 IPM Tailstock Diameter MT#5 Tailstock Quill Stroke 4" Machine Weight 16.380 lbs. EQUIPPED WITH: Fanuc 18i-T Control Doosan Model GL Gantry Loading System with Overhead Loading Gantry Arm Carousel Type Parts/ Tool Table Shaft Gripper Attachment for Loading and Unloading Long Parts 12" Three Jaw Hydraulic Chuck Tool Pre-Setter Programmable Tailstock Chip Conveyor $49.500 Located in FARLEY. IA CNCMachines.Net Michael@cncmachines.net ... more844-262-6789 WWW.CNCMACHINES.NET Please contact Michael Ford 844.262.6789 with any questions or concerns. WE are NOT a transportation company. We are NOT equipped to properly rig this item. We do have experience in helping hundreds of our customers finding the right sources and assist in helping them through the process of preparing. Rigging and shipping to their facility. CNCMachines.Net has the right to resell the item if not paid in full, all items are subject to prior sale. TERMS& CONDITIONS: The following terms and conditions(these"Terms and Conditions" are agreed to by CNCMachines.Net(CMN” and the purchaser(Purchaser" CMN's acceptance of any order is subject to these Terms and Conditions. No contrary. Additional or different terms, provisions or conditions shall be binding on CMN unless accepted by CNC in writing. 1. PAYMENT TERMS: Purchaser must pay purchase price in full prior to shipment. Terms of payment are net cash in United States dollars. Prior to shipment, to CMN's place of business, unless otherwise specified on the accompanying"quote/invoice" form. Purchaser shall pay CNCMachines.Net(CMN" a late penalty on all
|
|
|
1986 Mazak QT15N CNC Lathe Mazatrol Cam T-2
1986 Mazak QT-15N CNC Lathe with Mazatrol Cam T-2 Control SPECIFICATIONS: Max Bar Capacity 2" Chuck Size 8" Center Distance 20" Max Swing Over Bed 17.32" Max Swing Over Cross Slide 10" Max Cutting Diameter 11.81" Max Cutting Length 19.69" X Axis Travel 7.09" Z Axis Travel 20.08" Spindle Nose A2-6" Spindle Bore 2.44" Spindle Speed 4.500 RPM Spindle Drive Motor 20HP Tool Capacity 8 Station Cutting Feed Rate 197 IPM Rapid Traverse Rate 1.180 IPM Machine Dimensions 93" x 59" x 71" Machine Weight 9.260 lbs. EQUIPPED WITH: Mazatrol CAM T-2 Control Tool Eye Chip Pan Tool Holders Tailstock* Frozen from lack of use) $12.900 Located in SOUTH CAROLINA CNCMachines.Net Michael@cncmachines.net 844-262-6789 WWW.CNCMACHINES.NET Please contact Michael Ford 844.262.6789 with any questions ... moreor concerns. WE are NOT a transportation company. We are NOT equipped to properly rig this item. We do have experience in helping hundreds of our customers finding the right sources and assist in helping them through the process of preparing. Rigging and shipping to their facility. CNCMachines.Net has the right to resell the item if not paid in full, all items are subject to prior sale. TERMS& CONDITIONS: The following terms and conditions(these"Terms and Conditions" are agreed to by CNC Machines Network(CMN” and the purchaser(Purchaser" CMN's acceptance of any order is subject to these Terms and Conditions. No contrary. Additional or different terms, provisions or conditions shall be binding on CMN unless accepted by CNC in writing. 1. PAYMENT TERMS: Purchaser must pay purchase price in full prior to shipment. Terms of payment are net cash in United States dollars. Prior to shipment, to CMN's place of business, unless otherwise specified on the accompanying"quote/invoice" form. Purchaser shall pay CNC Machines Network(CMN" a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Purchaser
|
|
|
DAEWOO Puma 250 LBX Slant Bed CNC Lathe (1998)
DAEWOO Puma 250 LBX Slant Bed CNC Lathe(1998) Specifications: Swing Over Bed.22.4" Swing Over Cross Slide.14" Max Turning Diameter.15.3" Max Bar Stock Diameter.3" Spindle Bore.4" Spindle Speeds.3.000 RPM Max. X-Axis Travel.7.87" Z-Axis Travel.56" X-Axis Rapid Traverse.787 IPM. Z-Axis Rapid Traverse.945 IPM. Turret Positions.10. Tailstock Quill Diameter.3.9" Tailstock Quill Stroke.5" Electrics.30 HP. 220v, 3ph. Machine Weight.18.500 Lbs. Equipped With: Fanuc Control. Programmable Tailstock. 10-Position Turret. 10" 3-Jaw Kitagawa B-210 Hydraulic Chuck. Turbo Chip Conveyor. Enclosed Splash& Safety Guards. Any Questions Please Feel Free To Call Us 888-589-6721 or 909-348-5610.
|
|
|
10981 MAZAK SQT15S CNC Lathe, Sub-Spindle, Barfeeder, Chip Conv., 1997
1997 Mazak SQT 15S CNC Turning Center Asset# 10981 SN: 125233 Control: Mazatrol T Plus Specifications: Chuck Size. 8" Main Spindle, 6” Sub-Spindle Maximum Swing/ Over Carriage. 20.90" 15.74" Max. Cut Diam. Machine Length. 11.75" 20.78" Maximum Distance Between Spindles. 34.25" Maximum Bar Capacity. 2.00" X-Axis Travel. 7.12" Z-Axis Travel. 22.75" Spindle Speed. 35- 5000 RPM Spindle Nose/ Spindle Bore. A2-6" 2.40" Spindle Motor 30 Min. Cont. 25 HP/ 20 HP Sub-spindle Speed. 180- 5000 RPM Sub-spindle Motor. 10 HP Sub-spindle Travel(B Axis) 23.25" Rapid Traverse X. Z/ B, 1180 IPM/ 708 IPM Turret Type. 12 Position Turret Dimensions and Weight: Machine. 128" x 75" x 90" 12500lbs. Barfeeder. 195" x 36" x 51" 3500lbs. Coolant Pan/Chip Conveyor. 120" x 48" ... morex 53" 1500lbs. Features: LNS Hydrobar Mini Sprint Barfeed System Chip Conveyor Collet Style Chucks for Both Spindles Parts Catcher System Mazak Tool Presetter Sychronous Tapping(rigid tapping) Misc. Holders Manuals are NOT available for this machine Specifications and Features are Subject to Buyer Verification Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check and paypal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing:
|
|
|
Microkinetics 1236 CNC Lathe, Computer, Mach3
MicroKinetics CNC Lathe Model 1236 Includes: 1) 999-6500-010 Flood Coolant System. 2) 999-1236-440 Automatic Tool Post 4 Station 3) 999-1236-050 Variable Speed Spindle. 4) 999-1236-001 T hreading Package 5) Mach3 Machining software(Licenced) This machine was upgraded to run the industry standard software called Mach3. However all the item to convert it back are also included. 6) Computer Here is the website: SPECIFICATIONS: Model 1236 Swing Over Bed 12" Swing Over Gap 17" Length of Gap 9" Swing Over Cross-Slide 7½" Swing Over Compound 3" Distance Between Centers 36" Carriage Travel 30" Cross-Slide Travel 6" Compound Travel 2 5/8" Tailstock Spindle Travel 3 5/8" Tailstock Taper 3 MT Spindle Nose Mounting D1-4 Spindle Bore Diameter 1½" Spindle Taper 5 MT Spindle Taper with Sleeve ... more3 MT Spindle Speeds(Number) Range(9) 70- 1400 Motor& Electrics 2 HP. 220V, single phase Machine Net Weight 1100 lbs Machine Gross Weight 1200 lbs Controller Gross Weight 200 lbs Machine Dimensions W/O Stand 22"H x 26"W x 60"L Floor Space Required- Max. 30"W x 70"L FEATURES: Geared head with splash oil lubrication, Easy change 9 Speeds and infinitely variable speeds with VFD, Powerful 2 HP motor. 1 phase, 220 Volt D1-4 spindle, Hardened and ground bed with reinforced cross ribs, Headstock with tapered roller bearings, Electromagnetic starter switch, Large spindle bore diameter, High speed machining, Over $12k invested The machine was only used a few times For local pickup only Lowered reserve.
|
|
|
Bridgeport Romi EZ Path Flat Bed CNC Lathe, $3,750 no reserve
This a Bridgeport EZ Path one. We bought it in a package and know it has some issues. Motors all seem to be there and most of the major components are there. A few of the things I know are missing are the BMDC card. Door, wire track inside work area, cast iron tail stock retainer(that the bolt goes into to lock down the tailstock) I will answer what questions I can. I think it is restorable, but I think it will sell as parts machine first. It is listed as is. I can load on your truck free. Because of trucking issues in the past, I am putting local pickup only. I will load it on your truck free.
|
|
|
spindle cnc lathe/mill motor one only as pictured used 3phase collet type used
This item is used. But I have run it so I know it works. It has scratches from being used. As pictured. The item up for bid is identical to the picture. 18000 rpm cnc mill spindle 380 volt 300hz, this is a very high performance motor. I only have this one left as pictured. What you see is what you get.precision side included. Get quoted the(price of a new unit) Heavy item 45 lbs+ will require small crate fee. Better hurry this will not last long! Want buy it now? Just ask. If you have a feedback of less than 20 you have to ask permission BEFORE placing a bid. Anyone from outside of the lower 48 states must request a total at the end of the auction. I WILL STAND BEHIND EVERYTHING I SELL. UNLESS IT IS MARKED(SOLD AS IS) I ACCEPT PAYPAL. I ALSO ACCEPT CASH IF. IN PERSON PICKUP. PAYMENT MUST BE RECEIVED WITHIN 5 DAYS OF END OF AUCTION. WHEN PAYING ... moreBY PAYPAL. YOU MUST HAVE A CONFIRMED ADDRESS. I DO NOT SHIP. TO P.O. BOXES. NO EXCEPTIONS. MOST EVERYTHING I SHIP GOES USPS PRIORITY. OR FLAT RATE USPS. I REQUIRE INSURANCE, IT IS INCLUDED IN SHIPPING CHARGE. I WILL ALWAYS LEAVE FEEDBACK TO THOSE WHO LEAVE ME FEEDBACK. I WANT TO THANK EVERYONE FOR LOOKING AT. AND OR BIDDING ON MY ITEMS. If you are NOT in the US( lower 48 states)you MUST request for a total before you pay. Any item that is disassembled or modified in any way will NOT be refunded. DISCLAIMER: Due to a recent situation I must enforce the following terms for the auction. If you do not agree to the listed terms DO NOT BID! Shipping insurance is required on all items. No Exceptions! Any compensation for lost. Damaged, missing, stolen, or delayed items will be the sole responsibility of the purchaser through the applicable shipping company and the insurance purchased. The seller will not provide refund or replacement items for any situation. There are No Exceptions. Proof of shipment documentation is available via email upon request. Electrical/electronic items will NOT be refunded or replaced. Hand made or custom items cannot be returned.
|
|
|
RARE Vintage Metal Hobby Lathe 1976 15" Wood Base Machine Turning Tool Benchtop
UP FOR SALE IS A BEAUTIFUL CONVERSATION PIECE/ DISPLAY Metal Lathe w/ 4" chuck and 15" bed(has a 3" 3 jay chuck on it at the moment) This is a very rare piece circa 1976 made by TAIG out of california. I was able to find an add for it from a back issue of popular mechanics(second to last picture) and what was left of the manufacturers label that was under the bed when I removed it from the base(third to last pic) This was a passion project for me that I was about half way through reconditioning. It is missing a few parts namely the handle and gear to traverse the bed in the x axis. As well as the drive belt but that can be replaced with any standard fan belt. Please feel free to ask any questions. THANKS FOR LOOKING. Please review photo's carefully. SOLD AS-IS. Its missing the belt and the traveler gear and handle to move ... morethe bed in the x axis. Has been partially reconditioned. May be missing other parts as well. What you see is whats included. Motor runs and on/off switch works. motor sounds like bearing may be missing a ball or two, makes a little click when it starts up but otherwise runs well and smooth, I believe it is a 1/4 horse power motor but I may be wrong. all parts in photo are included but I'm not 100% sure that all of them are for this machine. Just what came with it when I purchased it years ago. Would make a great CNC conversion project. Auction is set to end Sunday night. Don't lose this great and very unique item to a bid sniper, bid early and bid often! Shipping is free but Please keep in mind it will still cost me a great deal of the starting price to ship it so please bid accordingly. Machine may be partially disassembled for shipment. ie. I may have to unbolt the bed from the wood base. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14b3ce62aa0-0x11a-
|
|
|
Clausing Colchester Storm CNC 80 Lathe Fanuc 21-T Control 6000 RPM 1997 Nice
You are bidding on: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Clausing Colchester Storm CNC 80 Lathe Fanuc 21-T Control. 6000 RPM Year: 1997 Very Clean Machine Any question please call: 818-441-8941 Please see pictures for additional details. I guarantee my sales. If I have missed something or the item is not as I described. Let me know within 5 days after you receive it and send it back to me in the same condition you received it for a full refund. You can contact me at phone: 818) 441- 8941 if you have any questions. Sales Tax: A 8.00% sales tax is applied to all orders shipped to California I really appreciate your bids.
|
|
|
10972J Bullard Dynatrol 76” Vertical Turret Lathe
Bullard Dynatrol 76” Vertical Turret Lathe Serial# 31786 Asset# 10972 Year: 1965 Specifications: Table Size. 4 Jaw 76” Maximum Swing 88” Maximum Height under Ram 72” Cross Rail Travel Vertical 62” Max. Height under Rail 60” Ram Head Vertical Travel 36” Ram Travel Horizontal 48 1/2” Min Hole Size Ram will Go In 9 1/2” Side Head Vertical Travel 72” Side Head Horizontal Travel 40” Table Speed 4-150 RPM Feeds- Fine.002- 100 IPM Feeds- Course.080- 500 IPM Rapid Traverse 120 IPM Main Motor 60 HP Floor Space 188” x 137” Height 214” Weight(Less Motor) 85.500 lbs. Weight of Turret Head with Feed Works 4.800 lbs. Preliminary Specifications- Subject to Verification Purchasing Information: There is a chance that this item may sell locally at our facility before we take it down from Ebay. Please verify it’s availability before purchasing! Specifications ... moreand features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check and PayPal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizing separately and it is not included with the sale price. We'll quote per customer requirements. Customer shipping method& machine design. We are a stocking dealer of new and used machine tools located in West Michigan and are members of the MDNA. We have over 1.000 different manual and CNC machines in stock for both fabrication and metal cutting applications. We
|
|
|
8488 KAIDA Model C6232ZK Lathe 13" Swing 40" Centers
Kaida Model C6232ZK Lathe. 13" x 40" Capacity This lathe has never been powered up or run. New condition. Serial# 082271 Asset#8488 Specifications: Swing over bed 13" Swing over Carriage 7.3" Diameter in Gap 20.5" Distance between center 40" Effective Gap Length 8" Spindle Bore 2" Number of Speeds 12 Range of Speeds 40-1800 RPM Range of Feeds Longitudinal 0.0015" 0.0913" Cross 0.0006" x 0.0365" Tailstock Sleeve 2.36" External Diameter) Taper of bore 4 MT Max. Travel of compound rest 4" Max. Cross Slide Travel 8.3" Max. Size of Tool.79" x.79" Overall Dimensions 84.25" x 40" x 47.2" Weight 4.056 lbs. We have over 1000 machines in stock and only list about 30% on ebay. Our inventory is always changing! Please call us or"Google" our name! ... morePurchasing Information: There is a chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check and paypal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizing seperately and it is not included with the sale price. We'll quote per customer requirements. Customer shipping method& machine design. We are a stocking dealer of new and
|
|
|
Chiave esagonale 15mm per torretta tornio, hexagonal lathe turret spanner wrench
Chiave esagonale per torretta tornio. Dimensioni circa 16cm. Hexagonal spanner wrench for lathe turret. Size about 16cm. Clicca sull'immagine per ingradire) Click on picture to enlarge) Clicca sull'immagine per ingradire) Click on picture to enlarge) Clicca sull'immagine per ingradire) Click on picture to enlarge) Si effettuano volentieri spedizioni combinate. Guardate le mie. I costi di spedizioni non aumentano purchè non si superi lo scaglione di peso e misure. Peso circa 0.2kg + imballo(circa +10÷20% Prezzi spedizioni internazionali: spedizioni internazionali economiche con le poste: e(tempi di consegna anche superiori ad 1 mese! spedizioni internazionali veloci con le poste: e spedizioni internazionali con corriere e Ovviamente nelle spedizioni fuori UE sono esclusi gli eventuali dazi doganali che sono a carico del ... moredestinatario. Per ulteriori informazioni potete chiamare il 333-1138428. Attenzione: alcune volte ebay sbaglia di indicare il luogo di eventuale ritiro dell'oggetto. Quello corretto è San Giorgio di Nogaro(UD) Combined shipping is welcome. Please see my. To buy multiple items the cost remains unchanged as long as you do not exceed the weight and the size. Weight is about 0.2kg + packaging(about +10÷20% The cost depends on the weight of the object and by the country: economy unregistered international shipping by postal service: and(delivery time over 1 month! expedited registrered international shipping by postal service: and international shipping by private service: and Import duties. Taxes and charges are not included in the item price or shipping charges. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. La legislazione vigente nell’Unione Europea prevede che anche i privati siano tenuti a dare garanzia sugli oggetti venduti. A meno che tale garanzia non sia esplicitamente esclusa al momento della vendita. Siccome un venditore privato non può mettere a disposizione un servizio di ass
|
|
|
Doosan Lynx 220LM Live Tool Lathe, haas st20m
2007 Doosan Lynx 220LM CNC Lathe w/Live Tooling SPECIFICATIONS: Bar Capacity: 2” Maximum Swing: 20.1” Maximum Turning Diameter: 12.6” Nominal Turning Diameter: 8.3” Maximum Turning Length: 21” Spindle Nose: A2-6” Spindle Bore: 2.4” Spindle Speeds: 6.000 RPM Spindle Motor: 20 HP X-Axis travel: 6.9” Z-Axis Travel: 21.7” Turret Position: 12 EQUIPPED WITH: 6" Hyd Chuck Included(fits 8" Hyd Chuck) Live Tooling Fanuc Series Oi-TC CNC Controls Tailstock Parts Catcher Chip Conveyor MTA V65E Bar Feeder Tooling will be included Coolant System Splash/Chip Guards Milling. Drilling and tapping capabilities High speed spindle Full contouring c-axis Heavy duty 12 stations turret that accept rotating tools holders and 24 position indexing One-piece Meehanite cast iron slant bed Rigit tapping(main spindle and rotary tools) Metered piston distributor ... morelubrication Way lube separation system Electric torque limiters. $54.900 Located HUNTSVILLE AL CNCMachines.Net 844-262-6789 Please contact Curt Doherty 844.262.6789 with any questions or concerns. WE are NOT a transportation company. We are NOT equipped to properly rig this item. We do have experience in helping hundreds of our customers finding the right sources and assist in helping them through the process of preparing. Rigging and shipping to their facility. CNCMachines.Net has the right to resell the item if not paid in full, all items are subject to prior sale. TERMS& CONDITIONS: he following terms and conditions(these"Terms and Conditions" are agreed to by CNCMachines.Net(CMN” and the purchaser(Purchaser" CMN's acceptance of any order is subject to these Terms and Conditions. No contrary. Additional or different terms, provisions or conditions shall be binding on CMN unless accepted by CNC in writing. 1. PAYMENT TERMS: Purchaser must pay purchase price in full prior to shipment. Terms of payment are net cash in United States dollars. Prior to shipment, to CMN's place of business, unless otherwise specified on the accompanying"quote/invo
|
|
|
2004 Mazak Integrex 200-3T CNC Lathe | 40 ATC | 9 Pos Lower Turret - #102064
2004 MAZAK INTEGREX 200-3T Mazatrol Fusion 640MT ID# 102064 SPECIFICATIONS Chuck Size- 8" Hydraulic Maximum Swing- 26" Maximum Cutting Diameter Chucking Upper- 26" Maximum Cutting Length- 40" Maximum distance Between Chuck Jaws- 45.27" Maximum Swing Over Lower Turret- 10.6" Maximum Cutting Distance Chucking Lower- 10.24" X Axis Travel- 22.83" Y Axis Travel- +/ 3.15" Z Axis Travel- 41.14" X2 Axis Lower Travel- 5.91" Z2 Axis Lower Travel- 38.98" B Axis Travel- 225º C Axis Increment- 0.0001º Main Spindle Nose/ Bore- A2-6" 2.99" Spindle Speed- 35- 5000 RPM Spindle Motor 30 Min. Continuous- 30 HP/ 25 HP Rotary Tool Spindle Speed- 12.000 RPM Rotary Tool Spindle HP- 25 HP Magazine Capacity- 40 Position ATC KM63 Lower Turret- 9 Position Drum Machine Dimensions(L x W x ... moreH) 151" x 88" x 101" Chip Conveyor Dimensions(L x W x H) 168" x 60" x 48" Machine Weight(Approx. Lbs EQUIPPED WITH C Axis Spindle Rotation Y Axis Capability B Axis Single Position Pendulum Style Turret(9) Station Lower Turret Automatic Tool Eye Chip Conveyor Side Discharge(40) Position Tool Changer w/ KM63 Nose 213 High Pressure Coolant Thru the Spindle Programmable Tailstock Complete Coolant System Chuck Air Blast PCMCIA Interface- 2 Slots 3.5" Floppy Disk Drive RS 232 Port Interface All Available Manuals All Available Tooling*CUT MOSTLY ALUMINUM* PAYMENTS ACCEPTED Paypal. For other payment options please contact Christina Ferguson at(863) 353 2693 or Toll Free at(855) 827 1387. We have the right to resell the item if it is not paid in full within(10) days. SHIPPING Please contact us for all shipping and rigging options. All machines MUST ship on an Air-Ride Equipped Trailer(completely covered with tarps) We are more than happy to assist you in making arrangements to pick up your item. Please contact us for shipping& rigging quotes at(863) 353 2693 or Toll Free at(855) 827 1387. Shipping Dimensions Machine- 151" x 88" x 105"
|
|
|
OKUMA CNC LATHE LB12, 8" chuck, Tailstock, Good Condition - See Video - Michigan
Okuma LB12 CNC Lathe MACHINE IS UNDER POWER IN OUR LIVONIA MI FACILTY(DETROIT AREA) QUESTIONS CALL 734-655-0490 CNC Control. OSP 500LG Swing over Bed. 13.78" Max. Turning x Diameter. 7.87" x 15.91" Travels: Z Axis. 14.57" X Axis. 5.7" Spindle Nose. A2-6 Hole Through Spindle. 2.2" Spindle Speed. 65-3500 RPM EQUIPPED WITH: OSP 500LG CNC Control 8 POSITION TURRET TAILSTOCK APPROX. WEIGHT: 7.040 LBS APPROX. FLOOR SPACE: 91" X 62"
|
|
|
Niigata SPN 50 CNC Horizontal Machining Center Mill Fanuc 12000 RPM cat 50 40 HP
NIIGATA SPN-50 High-Speed CNC HORIZONTAL MACHINING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 2005 PALLET SIZE(500mm x 2) 19.7" x 19.7" MAXIMUM PALLET LOAD 1.320 LBS PALLET CHANGE TIME 7.5 SECONDS SPINDLE CENTER TO PALLET TOP 5.9" 35.4" SPINDLE NOSE TO PALLET CENTER 5.9" 35.4" X AXIS TRAVEL 29.5" Y AXIS TRAVEL 29.5" Z AXIS TRAVEL 29.5" B AXIS INDEXING 1 DEG. RAPID TRAVERSE RATE X. Y& Z AXIS 1969 IPM CUTTING FEED RATE 0.01- 1181 IPM SPINDLE TAPER CAT 50 SPINDLE SPEEDS 12.000 RPM SPINDLE MOTOR 40 HP TOOL CHANGER CAPACITY. COOLANT 60 STATIONS. 106 GAL. TOOL CHANGE TIME(TOOL TO TOOL) 1.4 SECONDS DIMENSIONS. APPROX. 100" x 231" x 115" WEIGHT. APPROX. 29.300 LBS EQUIPPED WITH: FANUC 18iM CNC CONTROL w/COLOR 10.4" LCD SCREEN, RS-232C PORT INTERFACE FOR DNC OPERATION, RIGID/SOLID ... moreTAPPING. 99) TOOL OFFSET MEMORY, COOLANT THROUGH THE SPINDLE(215 PSI RATING) RENISHAW MP-4 AUTO TOOL LENGTH MEASUREMENT, INNOVATIVE DOUBLE COLUMN DESIGN. SPINDLE CHILLER, SYNC-SWING MOTION(SSM) ULTRA-FAST TOOL CHANGER, HELICAL INTERPOLATION. BROKEN TOOL SYSTEM, CUSTOM MACRO B. CUTTER COMPENSATION OFFSET, 48) FIXTURE OFFSETS. COMMON VARIABLES(600) 1050' EXTENDED MEMORY. SPECIAL CABINET COOLER, MANUAL PULSE GENERATOR. FLOOD/CURTAIN COOLANT SYSTEM, EXTERNAL LIFT-UP TYPE EXTERNAL CHIP CONVEYOR, DAIKIN SPINDLE CHILLER(SPINDLE OIL COOLING SYSTEM) BOX IN BOX RIGID DESIGN. MADE IN JAPAN WITH NM-24 ADAPTIVE CONTROL OPTION*EXCELLENT CONDITION; WELL MAINTAINED w/RECORDS* You are welcome to inspect. Run, and listen to this EXCELLENT running mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery
|
|
|
2006 Doosan Lynx 220LC CNC Lathe w/ Tailstock, Parts Catcher and More!
2006 Doosan Lynx 220LC CNC Lathe 8” chuck 2.65" Bar capacity 12.6” turn dia 4000 rpm A2-6 spindle 20 HP Fanuc OiTB Control 21” max cutting length 20" swing 12 station turret Tailstock Parts Catcher Chip Conveyor Coolant System Approx weight 7.000 lbs Video here: Have questions or need info. Call George at 602-625-6419. You can also email at george@rockfishmachinery.com
|
|
|
Hurco TM8 2005 CNC lathe, haas sl20
2005 Hurco TM8 CNC Lathe Specifics: Bar Capacity 2” Chuck Size 8” Max Machining Diameter 14” Max Machining Length 19" Spindle Nose A2-6 Spindle Speeds 4800 RPM Main Motor 22 HP Turret 10 X axis Travel 8" Z axis Travel 20" Rapid Traverse(X/Z) 750/ 945 IPM Floor Space 187” x 89” x 86” Weight 8.708 LBS. Equipped With: Tailstock MAX Control. SN:TM8-01007114AAA Price $ 26.900. Located Los Angeles CA CNCMachines.Net 844-262-6789 Please contact Curt Doherty 844.262.6789 with any questions or concerns. WE are NOT a transportation company. We are NOT equipped to properly rig this item. We do have experience in helping hundreds of our customers finding the right sources and assist in helping them through the process of preparing. Rigging and shipping to their facility. CNCMachines.Net has the right to resell the item if not paid in full, ... moreall items are subject to prior sale. TERMS& CONDITIONS: he following terms and conditions(these"Terms and Conditions" are agreed to by CNCMachines.Net(CMN” and the purchaser(Purchaser" CMN's acceptance of any order is subject to these Terms and Conditions. No contrary. Additional or different terms, provisions or conditions shall be binding on CMN unless accepted by CNC in writing. 1. PAYMENT TERMS: Purchaser must pay purchase price in full prior to shipment. Terms of payment are net cash in United States dollars. Prior to shipment, to CMN's place of business, unless otherwise specified on the accompanying"quote/invoice" form. Purchaser shall pay CNCMachines.Net(CMN" a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Purchaser shall also be liable for any and all costs and expenses incurred by CMN arising out of or in connection with efforts by CMN to collect any unpaid amounts hereunder including, without limitation, attorney or collection agency fees and expenses. Title to this equipment or merchandise shall not pass to Purchaser until payment of the purchase price is made in fu
|
|
|
Haas GT-20 CNC Lathe, Super Low Hours! 8" Hydraulic Chuck, Bolt-on Turret. L@@K!
2005 Haas GT-20 CNC Lathe 8” 3- Jaw Hydraulic Chuck 2.06” Draw Tube 13” Swing 20 HP 11” Max Cutting Diameter 12” Max Cutting Length 3” Spindle Bore A2-6 Spindle Nose Travels: X=6” Z=12” 4.000 RPM Bolt-on Style Turret Rigid Tapping Visual Quick Code Floppy Drive Coolant Pump Electrics: 208V Manufactured Date: November 2005. Approx. Spindle Hours: 720 Super Clean Machine& Under Power! Buyer is responsible for all removal& shipping charges. Contact us for quotations. Please inquire with any questions. Etc. Please call 617-800-9002 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14b3ddc7dd9-0x11a-
|
|
|
1995 Mori Seiki SL25MC CNC Lathe with Live Tool Milling
1995 Mori Seiki SL-25-MC5 CNC Lathe BAR CAPACITY. 2.5" SWING OVER BED. 20.5" SWING OVER CROSS SLIDE. 13.8" MAX. TURNING DIAMETER. 13.4" MAX. TURNING LENGTH. 20.9" SPINDLE SPEEDS. 35- 3.500 RPM SPINDLE BORE. 3.1" SPINDLE NOSE. A2-6 SPINDLE MOTOR. 20 HP X AXIS TRAVEL. 11.3" Z AXIS TRAVEL. 23.2" RAPID TRAVERSE RATE X/Z AXES. 472/590 IPM TURRET CAPACITY(6 CAN BE LIVE) 12 POSITIONS LIVE TOOLING MOTOR. 5 HP LIVE TOOLING SPEEDS. 80- 3000 RPM TAILSTOCK TRAVEL. 19.3" TAILSTOCK TAPER. MT#4 TAILSTOCK SPINDLE DIAMETER. 4.3" TAILSTOCK SPINDLE TRAVEL. 3.9" APPROX. DIMENSIONS. 183" x 66" x 77" MACHINE WEIGHT(APPROX) 11.000 LBS Fanuc OT Control Turbo Chip Conveyor Chip Blaster High Pr
|
|
|
36" BULLARD Cutmaster VTL, 3 jaw chuck, 240 rpm
ONE USED- 36” BULLARD Vertical Turret Lathe Model: Cutmater Serial Number: 28695 New 1953 36” Diameter 3-Jaw Chuck 44” Maximum Swing 30” Height Under Rail 5 Position Turret Head On Rail Side Head Table Speeds from 6.6 to 240 RPM Misc. Turret Tooling From Aerospace Plant 30 HP 220/440 Volt Electrics. Machine is offered subject to prior sale and strictly subject to acceptance to the terms and conditions as stated on Belmont Machinery Company's Invoice. We reserve the right to correct any typographical errors. Please note that these are approximate specifications only and that we advise that you personally inspect this machine to confirm the information provided. Seller will load the machine onto buyers truck F.O.B Aurora. IL. Buyer is responsible for all freight charges. Questions call Belmont Machinery Company at 630-844-9288 or email ... moresales@belmontmachinery Please contact us before paying in full.
|
|
|
Victor TNS3H CNC Lathe, 12" Chuck, Fanuc OT control- See video
Victor TNS3H CNC Lathe. Under power in Livonia MI. Good condition. Questions. Call 734-655-0490 Chuck 12" Turning diameter: 10" Spindle hole: 3" Spindle rpm range: 25- 3000 Turret Positions: 10. Motor power: 15HP Control: CNC FANUC O-T
|
|
|
42" BULLARD Vertical Turret lathe, 4 jaw chuck, 2 heads Vertical/horizontal
42" TABLE BULLARD VTL. 4 JAW CHUCK. VERTICAL AND HORIZONTAL CUTTING HEADS. THIS MACHINE IS AVAILBLE FOR INSPECTION MON-FRI OR BY APPOINTMENT. REMOVAL BY THE END OF AUGUST AT THE LATEST. BUYER RESPONSIBLE FOR ALL RIGGING CHARGES. RIGGER TO BE INSURED TO ENTER BUILDING. PLEASE CHECK OUT THE YOU-TUBE VIDS TO SEE THIS MACHINE RUNNING. YOU'LL BE ABLE TO SEE IT RUN IS MOST SPEEDS AND FEEDS. THE MACHINE IS LOCATED NEAR ASHTABULA OHIO(NORTHEAST OF CLEAVELAND) MACHINE IS UNDER POWER FOR INSPECTION LINK TO YOU-TUBE VIDEOS WE PREFER WIRE TRANSFERS FOR TRANSACTIONS OF THIS SIZE. COMPANY CHECK OK AS LONG AS YOU DON'T MIND WAITING FOR IT TO CLEAR. CALL ME OR E-MAIL ME WITH ANY QUESTIONS 440-259-2222 ASK FOR MIKE
|
|
|
Lot of 2 Monarch 10ee Metal lathes 1 TURRET 1 REGULAR 220 V 1 PHASE WELL TOOLED
HI. THANKS FOR LOOKING, TODAY WE ARE OFFERING UP AN EXCEPTIONAL PACKAGE OF 2 METAL LATHES AND A CABINET FULL OF TOOLING. PLEASE FEEL FREE TO CALL US AT 717-926-3975 WITH ANY QUESTIONS! THANKS AGAIN, CENTRAL PENN MACHINERY WHAT WE HAVE TO OFFER HERE IS A GREAT PACKAGE DEAL! 2. THATS RIGHT, 2) MONARCH 10EE METAL LATHES, AND A CABINET FULL OF TOOLING! The turret lathe is in excellent working condition. The second lathe is included as a parts machine. Both are outfitted with a D-1-3 camlock spindle. Both are equipped as a 12.5x20" center to center machine. The first machine that is outfitted with a removable turret tail stock has been updated with a T.B. Woods Dc variable speed drive. THE POWER INPUT FOR THAT MACHINE IS 220 VOLT 1 PHASE.YES. IT CAN BE RUN ON REGULAR HOUSE POWER! It is currently outfitted with a quick acting collet closer. ... moreThis machine runs beautifully. The main spindle is quiet, the speed control works properly, the turret works well, the compound is nice and tight, the power feeds work properly. This machine is totally ready to be put back into service just the way it is. The second lathe is being sold as a parts lathe. It is wired 220 volt 3 phase. It is a great machine to have because it provides all kinds of parts for the first lathe in the event of a breakdown. Or with some work, could be put back together and would mean 2 working lathes. The parts lathe includes a regular tailstock which is complete, but disassembled. We disassembled it to clean it up and lubricate it and never got around to doing that or reassemble it. It can be reassembled and used on the main machine as it is a direct replacement for it. It has the guide for a taper attachment. That machine had some sort of tracer unit on it. We never did anything with it and were going to use it for parts, or possibly convert it back to a standard lathe, but that was over a year ago, and we never got around to doing anything with it, so we are now including with the sale of the other lathe. We have not run that machine, an
|
|
|
2003 Kia SKT15LMS CNC Lathe w/ Sub-Spindle, Live Tooling, Parts Catcher & More!
2003 Kia SKT15LMS CNC Lathe 6” chuck 1.5″ Bar capacity 10″ turn dia 3200 rpm 15 HP Fanuc OiTB Control 20.8″ centers 21.6″ swing 12 station turret Live Tooling with 2 axial and 2 radial holders Belt Chip Conveyor Sub Spindle with 5” Chuck Parts Catcher Tool Setter Have questions or need info. Call George at 602-625-6419. You can also email at george@rockfishmachinery.com
|
|
|
South Bend Logan Turret Lathe Tailstock Large Threading Die Holder
1" shank. Has 1/2" bore, holds 2-1/2" thread dies no makers name, Comes as shown. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14b3ddc7e55-0x10f-
|
|
|
TUBING PIPE NOTCHER ANGLE FISH-MOUTH FITTER COMMERCIAL GRADE 208 230 460 3 PH
TUBING PIPE NOTCHER ANGLE FISH-MOUTH FITTER COMMERCIAL GRADE 208 230 460 3 PH Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: HELLO AND THANKS FOR BUYING WITH US! CLICK HERE TO C ONTACT US CHECK OUR 100% POSITIVE FEEDBACK! BID AND BUY WITH CONFIDENCE. QUESTIONS? call us DIRECT 24/7 at 818-293-5345 LM PLEASE FEEL FREE TO MAKE US A REASONABLE OFFER ON ANY ITEM. WE WILL RESPOND QUICKLY. 7 DAYS A WEEK! NO PAY-PAL? NO PROBLEM! WE CAN TAKE YOUR CREDIT/DEBIT CARD PAYMENT DIRECT BY CALLING(818) 293 5345 DEALER PARTS PRESENTS TUBING ... morePIPE NOTCHER ANGLE FISH-MOUTH FITTER COMMERCIAL GRADE 208 230 460 3 PH CAN SHIP TO YOU- SEE PICTURES FOR DETAILS CALL US AT ABOVE PHONE# FOR MORE INFO Please click on our EBAY STORES below for more GREAT deals! http:stores.ebay.com/alldealerparts http:stores.ebay.com/newpartsking WE WILL SHIP/FREIGHT OUR ITEMS MOST ANYWHERE IN THE WORLD- PLEASE CONTACT US AT 818-293-5345 FOR DETAILS- ALL OF OUR ITEMS ARE IN STOCK AND READY TO SHIP- We are committed to your satisfaction. At DEALER PARTS. We have taken great strides to earn our 100% POSITIVE FEEDBACK! We will automatically leave you positive feedback after we receive cleared payment from you. We want you to be 100% happy with your order. When you receive your order. Please do take a moment to return the favor and leave us positive feedback at eBay. If you are not satisfied, please let us know before leaving feedback! Send us a message through eBay and we'll do whatever it takes to earn your satisfaction! Please know that your positive feedback and 5 star rating on e
|
|
|
Industrial Arc-Fit Hand Press Tube Notcher with Collapsible Legs
Industrial Arc-Fit Hand Press Tube Notcher. Collapsible legs. Retails over $2.000. The Arc-Fit method is a simple and dependable way to create notches in pipe or tubing. Slots and many other types of end notches. Arc-Fit tooling can fit many iron workers, punch presses, or even press brakes. BUYER SETS UP OWN SHIPPING* OR LOCAL PICK-UP* Please contact me with questions!
|
|
|
HBS 0 - 60 VOLT 250 AMP DC POWER SUPPLY RECTIFIER PLATING ELECTROPLATING
This sale is for a Laboratory Surplus HBS Model L25060X Variable Output Rectifier Electroplating D.C. Power Supply. Input: 208V 3 Phase 55 AMPS. Output: 0-60V DC 0-250 AMPS. This unit is guaranteed to be in excellent operational and very good cosmetic condition. Buyer to pay calculated freight from Folsom. CA 95630. Send me your shipping info including address and forklift/ loading dock availability, and I will get you an accurate freight quote. NMFC 63420, sub 2, Class 85, 850 lbs. Local Pick-Up here in Folsom is welcome! Feel free to call me if you have any questions. Mark 916-761-6310.
|
|
|
TENNSMITH CATALOG/BROCHURE-MAKING SHEET METAL MORE PRODUCTIVE-BENDERS-SHEARS ETC
This is a Tennsmith catalog/brochure. Making sheet metal more productive It is in good condition. It shows a little shop use. It has 20 pages. I go to the post office on Monday. Wednesday and Friday for shipping. Shipping and Handling will be $5.00 No International Shipping I do not refund. I accept Paypal. Thank you for looking at my items.
|
|
|
ROCKWELL 20" VERTICAL BAND SAW VARIABLE-SPEED with BLADE WELDER
ROCKWELL 20" VERTICAL BAND SAW VARIABLE-SPEED with BLADE WELDER- ROCKWELL 20" VERTICAL BAND SAW WITH BLADE WELDER INVENTORY# 6598 MODEL: 20/ 28-3X5 S/N: 173605 SPECIFICATIONS: THROAT: 20" HEIGHT UNDER GUIDE: 12" TABLE SIZE: 24" x 24" TABLE TILT: 15°/ +45° VARIABLE SPEED: LOW: 50- 530 RPM HIGH: 450- 4500 RPM BLADE LENGTH: 12' 6" ROCKWELL MOTOR: 2 HP/ 230/460V/ 1725 RPM/ 60 HZ/ 3 PH EQUIPMENT/ FEATURES INCLUDED: BLADE WELDER. BLADE GRINDER& BLADE SHEAR CHIP BLOWER HIGH/ LOW TRANSMISSION ADJUSTABLE WORK LIGHT MECHANICAL SPECIFICATIONS: DIMENSIONS: 43" L x 32" W x 78" H SHIPPING WEIGHT: 810 LBS(APPROXIMATE) BALTIMORE. MD WAREHOUSE SHOP MORE BAND SAWS HERE! CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business ... morehours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US: Norman Machine Tool Group 1311 South Ponca St Baltimore. MD 21224 Phone: 800-394-4399 Fax 410-633-7737. Business Hours: Monday-Friday/ 9 a.m. 5 p.m. Closed most Holidays- Call if not sure) RETURNS Returns will not be accepted without prior approval. If you need to make a return. Please contact us before you ship the merchandise back so we can issue you a Return Merchandise Authorization(RMA) number. All items are sold with the best intentions and most complete description available. PLEASE ASK QUESTIONS BEFORE BIDDING! Buyer must pay for r
|
|
|
ENCO BANDSAW BLADE BUTT WELDER MODEL 293-8020 1/8"-5/8" 3-16MM
LIGHTLY USED ENCO BANDSAW BLADE WELDER 1/8"5/8" 3-16MM MODEL 293-8020 SERIAL HCW260 INCLUDES BLADE SHEAR INCLUDES DEBURRING WHEEL POWER: 220V- 230V SINGLE PHASE 2.4KVA POWER GUARANTEED FULLY FUNCTIONAL OWN A PIECE OF HISTORY! THIS ITEM WAS ORIGINALLY OWNED AND USED BY MASTER CRAFTSMAN CAL WILLIAMSON OF EL CAJON. CALIFORNIA. MR.WILLIAMSON WAS RESPONSIBLE FOR THE ORIGINAL SRAM BICYCLE GRIPSHIFT PROTOTYPE DESIGN THAT HAS BECOME THE STANDARD ON TODAYS BICYCLES. MR.WILLIAMSON CONTRIBUTED HIS EXPERTISE TO MANY EXCITING PROJECTS OVER THE YEARS INCLUDING FABRICATING ENGINES. BOATS, CARS, BICYCLES, AIR PLANES, AND MUCH MORE! IF YOU HAVE QUESTIONS ON THIS ITEM OR HAVE A SPECIFIC NEED FOR A MACHINE OR MACHINE TOOL ACCESSORY. PLEASE CALL US AT 858-754-8321.
|
|
|
STARTRITE 20RWH 20" Vertical Bandsaw with Hydraulic Table Feed
Model number 20RWH Year of Manufacture 1984 SPECIFICATIONS: Throat 20" 508mm) Workpiece height-max 10" 254mm) Blade speed Inf. variable Blade speed range 60 to 3600 SFPM Maximum usable blade width 1/16" thru 3/4" Blade length 130" Band wheels-number 3-diameter 14" x 1-1/2" Wheel tires bonded rubber Blade guides-type solid carbide insert Table type hydraulic Table size 20-1/2" x 20-1/2" Table tilt-left 15 deg-right 45 deg-front or back 5 deg Table stroke 8-1/2" Table feed rate 0 to 35"min Table force 0 to 210 lbs Table height 43-1/2" Electrics 220/440/3/60 Drive motor 1-1/2 HP Gear transimission 2 speed. Totally enclosed Floor area 55" x 25" x 72"h Machine weight 825 lbs EQUIPPED WITH: Built-in blade welder, grinder& shear 1" capacity, Powered by The free listing ... moretool. List your items fast and easy and manage your active items. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14b3fd38d01-0x10f-
|
|
|
20" Doall Model 2013-20 Vertical Bandsaw, S/N 377-831160 (1983)
Constantly getting new inventory. Subscribe to our New Arrivals Monthly Newsletter and check out the latest machines! Over 1000 Machines in Stock Across the Country. Thank you. IA Machinery eBay. 6458- Doall Vertical Bandsaw Manufacturer: Doall Model: 2013-20 S/N: 377-831160 Year: 1983 Specifications: Throat Depth 20" Max. Work Height 12" Table Size(Tilting) 26" x 26" Blade Speed(Variable) 50- 5.200 FPM Blade Size 1/16" 1" x 154" Blade Wheel Size 20" Dimensions(L x W x H) 55" x 45" x 82" Weight 1.300 Lbs. Equipped With: Blade Welder Blade Grinder Rip Fence Blade Cut- Off Tool Chip Blower Work Light DC Variable Drive High/Low Transmission Note: Purchased From Northrup Gruman Maintenance Shop Horsepower: 2 Location: Huntington Park. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may ... morebe provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to t
|
|
|
VERY CLEAN! 18" Grob Vertical Bandsaw Mdl: 4V-18 S/N: 3160
4676- Grob Vertical Bandsaw Great looking saw. Coming from a company that recently closed. Check out the large photos below this description. As you can see. Machine was really taken care of. High and low gear work. Blade welder and grinder work. Table tilt works smoothly. Light fixture works. You may not need this but could not get pneumatic feed to work. All the hosing looks good, so might be simple fix. Can be demonstrated under power. Video of unit under power available. Sold as is, as shown. Si hablamos espanol. No loading charge. Can refer you to a shipping broker or you can use an online service like freightquote. Can make a custom pallet for $100 but if you use a flat bed truck. You will not need it. Do not have capability to do full crating. Check out our eBay store. Over 900 machines in stock between Los Angeles. Ca. and Painesville, ... moreOhio. Let us know if you have any questions. 323-587-1887 Manufacturer: Grob Model: 4V-18 S/N: 3160 Year: Specifications: Throat 18" Max Work Height 12" Table Size(Tilting) 28" x 24" Blade Speed(Variable) 40-5.000 FPM Blade Size 1/8"1" x 148" Dimensions(L x W x H) 45" x 45" x 75" Weight 1.500 LBS Equipped With: Blade Welder Blade Grinder Blade Cut Off Tool Chip Blower Work Light Horsepower: 3 Location: Huntington Park.CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charg
|
|
|
20" Doall Model 2012-2H Vertical Bandsaw, S/N 383-89323 (1989)
6668- Doall Vertical Bandsaw Manufacturer: Doall Model: 2012-2H S/N: 383-89323 Year: 1989 Specifications: Throat Depth 20" Max. Work Height 12" Table Size(Tilting) 33 1/2" x 26 1/2" Table Travel 10" Table Feed Rate(Variable) 0- 12 FPM Blade Speeds(Variable) 40- 5.200 FPM Blade Size 1/16" 1 x 154" Blade Wheel Diameter 20" Dimensions(L x W x H) 62" x 50" x 85" Weight 1.700 Lbs. Equipped With: Hydraulic Table Feed Blade Welder Blade Grinder Blade Cut Off Tool Chip Blower DC Variable Drive Mitering Attachment Horsepower: 2 Location: Huntington Park. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery ... more2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices do not include any federal.
|
|
 |