|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$16.40 Shipping Condition: Used Location: Worcester, United States
Buy It Now
$12.00 Shipping Condition: New Location: Manassas, United States
Buy It Now
Condition: New Location: Walled Lake, United States Pickup is fine. Before signing, remove the stretch film and inspect. Unit may need light cleaning. Let us arrange your freight at the best rate possible.
Buy It Now
$15.45 Shipping Condition: Used Location: New Paris, United States Local pick-up is always an option. ● Handled with care quickly! Trusted and used by other professionals just like you!
Buy It Now
Free Shipping Condition: New Location: Chino, United States The platform can be rotated 30 degrees at most, and the precision can be kept all the way when repeat works. Easy to locate PCB board, high flexibility ... moreensure high printing precision. The brackets using the bolt bar to adjust the height, convenient for controlling the thickness of PCB. Packing List: 1 x Pinter 1 x Manual Working Area: 300x240mm; Weight: 8kgs; Height: 0-120mm adjustable ; Left-Right Adjustable: -10-----+10mm ; Front-Rear Adjustable: 0-10mm; Installation and maintenance Install: Refer to the install guide Maintenance: Add grease to the stencil bracket lifting motion/screw rod/ transimission motion on a regular basis.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Height of Upper PCB: ≤20mm. - Height of Lower PCB: ≤10mm. - Inner Side of PCB Range: ≤240mm. Make sure that the components on the circuit board will not ... morecollide with the body and the blade. This machine is only used for circuit boards with pre-engraved V-cutting, and should not be used for other purposes.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: ❖ Voltage: AC110V ❖ Power: 40W ❖ V-CUT Thickness：0.6-2.0mm ❖ Upper Blade Adjust Range: 0-0.59in ❖ Length of Platform: 290mm ❖ Height of ... moreUpper PCB: ≤20mm ❖ Height of Lower PCB: ≤10mm ❖ Inner Side of PCB Range: ≤240mm Instructions 1. Connect the power supply and activate the switch. 2. Adjust the gap between the upper and lower blades. 3. The upper and lower cutters must be on the same plane, and the error cannot exceed 0.1mm. 4. Set the cutting stroke and speed. Packing Including ✔ 1*V Cut Groove PCB Separating Separator.
Buy It Now
Free Shipping Condition: New Location: Clawson, United States nbsp, FriendlyNotice. Upon receipt of our items please ensure the order is correct. We rigorously test and check our items to meet the toughest standards ... moreprior to shipping. If you encounter any problems please contact us. We will do everything we can to make sure your happy with your order. 2 X Littelfuse Wickmann-64600001003-Fuse Holder. 5 X 20Mm, Pcb Mount Descriptions. 2 X Littelfuse Wickmann-64600001003-Fuse Holder. 5 X 20Mm, Pcb Mount FUSE HOLDER. 5 X 20MM, PCB MOUNT Voltage Rating VDC:250V Voltage Rating VAC:250V Fuse Current:6.3A Fuse Holder Type:Cartridge Fuse Holder Holder Terminals:Solder Lug No. of Fuses:1 Fuse Size Held:5mm x 20mm Series:646 RoHS Compliant: Yes, Shipping. Option A: ShippingMethodStandard- Shipment will arrive in 1 to 6 business days on average. Unfortunately. We do not offer international shipping services at this time. We currently only ship within the 48 continental US states. If you would like an item to be shipped to a PO Box. Alaska, Hawaii, Puerto Rico or Guam, please contact us before check out to see if this may be accommodated. Payment. Option A: Paypal or eChecks via Paypal. Option B: Credit Cards(Visa. MasterCard and American Express) with a US billing address. Return Policy. If you are not satisfied. Please contact me before leaving feedback so I may have the opportunity to fix any issues. If you would like to return an item. Please keep it in original condition and inform us you would like to process a return. Full refunds will be issued for damaged. Defective or inaccurately described products. Please notify us within 30 days for defective units. We will have a solution within 24 hours. For exchanges and/or returns other than quality issues. Buyer is responsible for return shipping costs. Guide: How to make a best offer? 1. nbsp Find a listing that accepts Best Offers. 2. nbsp Click the Make Offer button. You may need to sign in. 3. nbsp Enter your offer. If you want to include a note to the seller. Click the Add your note link. 4. nbsp Click the Review offe
Buy It Now
$14.51 Shipping Condition: New Location: Webberville, United States Universal part# 47409901. need to arrange for pickup.
Buy It Now
$15.46 Shipping Condition: New – Open box Location: Webberville, United States Universal part#45384402. need to arrange for pickup.
Buy It Now
Free Shipping Condition: New Location: Endicott, United States
Buy It Now
Free Shipping Condition: New Location: Midway, United States This auction for 32mm CL feeders Brand New Philips Assembleon Feeders. Pneumatic Style. Fits Yamaha YV100 and other machines. Philips Topaz, Opal, Sapphire(GEM ... moreline Machines) Also available 8x4 and 8x2 and 12mm thru 72mm CL Version Adjustable Pitch feeders and 8x2 for 0201 components(green handle) On Jan-19-07 at 22:19:13 PST. Seller added the following information: Sizes available 8x2. 8x4, 12mm, 16mm, 24mm, 32mm, 44mm. 56mm and 72mm.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e90539086-0xf8-
Buy It Now
$15.46 Shipping Condition: New – Open box Location: Webberville, United States Part# 90050658. need to arrange for pickup.
Buy It Now
Free Shipping Condition: New – Open box Location: Ventura, United States Title: NEW Toshiba, Model: TC5710000AD-12, EPROM, MicroChip. Model: TC5710000AD-12. Fast Dispatch Service. We're down to earth, easy to work with people.
Buy It Now
$30.00 Shipping Condition: Used Location: Maineville, United States Quad/Tyco IQ nozzle changer. For C series & Q series.. Condition is Used. Shipped with Flat Rate Freight.
Buy It Now
Free Shipping Condition: New Location: Chino, United States V Cut Groove PCB Separating Separator Cutting Machine Groove Separator Machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States The platform can be rotated 30 degrees at most, and the precision can be kept all the way when repeat works. Easy to locate PCB board, high flexibility ... moreensure high printing precision. The brackets using the bolt bar to adjust the height, convenient for controlling the thickness of PCB. Packing List: 1 x Pinter 1 x Manual Working Area: 300x240mm; Weight: 8kgs; Height: 0-120mm adjustable ; Left-Right Adjustable: -10-----+10mm ; Front-Rear Adjustable: 0-10mm; Installation and maintenance Install: Refer to the install guide Maintenance: Add grease to the stencil bracket lifting motion/screw rod/ transimission motion on a regular basis.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: ❖ Voltage: AC110V ❖ Power: 40W ❖ V-CUT Thickness：0.6-2.0mm ❖ Upper Blade Adjust Range: 0-0.59in ❖ Length of Platform: 290mm ❖ Height of ... moreUpper PCB: ≤20mm ❖ Height of Lower PCB: ≤10mm ❖ Inner Side of PCB Range: ≤240mm Instructions 1. Connect the power supply and activate the switch. 2. Adjust the gap between the upper and lower blades. 3. The upper and lower cutters must be on the same plane, and the error cannot exceed 0.1mm. 4. Set the cutting stroke and speed. Packing Including ✔ 1*V Cut Groove PCB Separating Separator.
Buy It Now
$7.15 Shipping Condition: New – Open box Location: Homosassa, United States
Buy It Now
$1099.00 Shipping Condition: New Location: West Milford, United States The device supports remote system upgrade, NeoDen provides a life long system upgrade service for free to you. NeoDen4 is a flexible pick and place machine ... morefor all types of production. Automatic electric feeders, reduce the feeding deviation;.
Buy It Now
$14.51 Shipping Condition: New – Open box Location: Webberville, United States Universal Instruments Theta Axis Motor Part Number 44714204 for Universal GSM Placement Machines. This item is used. Tested and functional Sold with a ... more30 day money back guarantee. Island SMT is a service-focused organization dedicated to providing customers with the highest level of support for Electronic Manufacturing and Test Equipment. We are based in Tampa. FL. We have approximately 10,000 sq. ft. that includes a pallet rack storage system and a diagnostic laboratory. Our remote sites are located in the United States and Mexico. We offer our clients a wide range of services and replacement parts.
Buy It Now
$63.88 Shipping Condition: Used Location: Webberville, United States Need to arrange for pickup.
Buy It Now
$15.46 Shipping Condition: New Location: Webberville, United States Part# 21411000. need to arrange for pickup.
Buy It Now
$14.51 Shipping Condition: New – Open box Location: Webberville, United States Part# 30921603. 4Tech Electronics. need to arrange for pickup.
Buy It Now
Free Shipping Condition: New Location: Endicott, United States Bb7mconb#3.
Buy It Now
Free Shipping Condition: Used Location: Leander, United States Model: NMO01. (1) Omron NM001 Card. Manufacturer: Omron. CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer ... moreof this product. Original manufacturer's warranty does not apply.
Buy It Now
$14.51 Shipping Condition: New – Open box Location: Webberville, United States Universal part#45193601. Alt Part #:52367601. need to arrange for pickup.
Buy It Now
$10.75 Shipping Condition: New Location: Rushford, United States
Buy It Now
$9.99 Shipping Condition: New Location: Fresno, United States Assembleon sensor 1-3 # 9965 000 03310 (New) Yamaha # KV8-M655F-010Sold as is.. They came from a spare parts cabinet for a PCBA/SMT manufacturer that ... moreclose down.
Buy It Now
$128.00 Shipping Condition: Used Location: Milton Freewater, United States THIS IS A WORKING OI ANALYTICAL 1030 AURORA TOC ANALYZER.
Buy It Now
$14.51 Shipping Condition: Used Location: Webberville, United States 8mm Paper tape support for gsm feeders. need to arrange for pickup. This is for Five(5) pieces. No screws included.
Buy It Now
$22.00 Shipping Condition: Used Location: Unionville, United States
Buy It Now
$13.06 Shipping Condition: Used Location: Moultrie, United States All products are sold without an existing warranty. UNLESS OTHERWISE STATED.
Buy It Now
$20.00 Shipping Condition: New – Open box Location: Canada
Buy It Now
$13.00 Shipping Condition: New Location: Endicott, United States NEW UIC 43675101 Head Interface PC BD.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: ❖ Voltage: AC110V ❖ Power: 40W ❖ V-CUT Thickness：0.6-2.0mm ❖ Upper Blade Adjust Range: 0-0.59in ❖ Length of Platform: 290mm ❖ Height of ... moreUpper PCB: ≤20mm ❖ Height of Lower PCB: ≤10mm ❖ Inner Side of PCB Range: ≤240mm Instructions 1. Connect the power supply and activate the switch. 2. Adjust the gap between the upper and lower blades. 3. The upper and lower cutters must be on the same plane, and the error cannot exceed 0.1mm. 4. Set the cutting stroke and speed. Packing Including ✔ 1*V Cut Groove PCB Separating Separator.
Buy It Now
Free Shipping Condition: New – Open box Location: South Korea TOKYO ELECTRON. BOARD.IF CSS.
Buy It Now
$7.15 Shipping Condition: Used Location: Homosassa, United States
Buy It Now
$119.33 Shipping Condition: Used Location: Nashua, United States Part No: L-019-0714.
Buy It Now
$119.33 Shipping Condition: Used Location: Nashua, United States Part No: L-022-0002.
Buy It Now
$150.00 Shipping Condition: Used Location: Mexico YOU WILL RECEIVE A USED GENERAL PRODUCTION DEVICES COMPONENT FORMER MODEL CF9 SOME DETAILS: Features are as follows: Forms axial components· Meets ... moreexacting military standards· Eliminates component body-to-lead stress· Form loose or taped axial-leaded components· Tape mounted components up to 25.000 parts per hour· Loose fed components up to 4.000 parts per hour· Form components with lead diameters between 0.015" 0.38 mm) and 0.060" 1.52 mm) Includes operations manual Symbol inches mm X Height to seating plane(formed leads) 655 ±.010 16.64 ± 0,25 Y Operating Clearance- seating plane(straight leads) Symbol inches mm A Component centering.250 ±.012 6.35 ± 0,30 B Sprocket hole pitch.500 ±.012 12.70 ± 0,30 C Carrier tape width.710 +.039 to-020 18.00 + 1,00 to-0,50 INPUT VOLTAGE IS 115VAC 60HZ. 5AMP THE UNIT POWERS UP AND FORMS PARTS WE SUPPLY A DOMESTIC DOA WARRANTY WHICH MEANS ITEMS OUTSIDE THE USA ARE SOLD AS IS W/O RETURNS. LET US KNOW IF YOU HAVE ANY QUESTIONS. THANKS FOR LOOKING;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1418a8262ae-0x102-
Buy It Now
$22.00 Shipping Condition: Used Location: Unionville, United States
Buy It Now
Condition: Used Location: Longwood, United States
Buy It Now
Free Shipping Condition: Used Location: San Diego, United States Hepco Die 3220-103P Cut and Form Machine
Buy It Now
$6.50 Shipping Condition: New Location: Wayne, United States You agree that our sole and exclusive maximum liability arising from any product sold on this site shall be the price of the product ordered. Our friendly ... morestaff is eager to assist you in any way we can!
Buy It Now
$13.60 Shipping Condition: Used Location: Binghamton, United States
Buy It Now
$9.00 Shipping Condition: New Location: Endicott, United States
Buy It Now
$9.23 Shipping Condition: Used Location: Homosassa, United States
Buy It Now
$12.60 Shipping Condition: Used Location: Noblesville, United States · Instant transfer from your bank account (if eligible). We will respond promptly and get you the answers you need. Everything is sold as is as seen.
Buy It Now
$4.00 Shipping Condition: Used Location: Morristown, United States Asymtek KB-01 Barrel Adapter Set. Condition is "Used". Shipped with USPS First Class.
Buy It Now
Free Shipping Condition: Used Location: Baroda, United States If you are not able to pick up locally, we are able to get competitive freight quotes as well.
Buy It Now
Free Shipping Condition: New Location: Bosque Farms, United States Receive only what is pictured/listed.
Buy It Now
$15.45 Shipping Condition: Used Location: Salt Lake City, United States Tokyo Electron GHOST-SQUARE-RS03 BOARD. Please look at the pictures the board is good but one of the the ethernet plastic covers is gone . Condition is ... more"Used". Shipped with USPS Priority Mail.
Buy It Now
$14.51 Shipping Condition: Used Location: Webberville, United States Part# 44866207. need to arrange for pickup.
Buy It Now
Free Shipping Condition: Used Location: South Korea FAST PLUM-001 P-900155 FRAME GRABBER PCI Board- FREE SHPPING FEE. CONDITION- TAKEN FROM A WORKING EQUIPMENT-SHIPPING- Winning bidder will get free Shipping ... moreand Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
Buy It Now
$36.13 Shipping Condition: Used Location: Homosassa, United States
Buy It Now
$99.09 Shipping Condition: Used Location: Webberville, United States Need to arrange for pickup.
Buy It Now
$7.15 Shipping Condition: Used Location: Homosassa, United States
Buy It Now
Free Shipping Condition: Used Location: Blacksburg, United States Photos are the actual item you will receive, unless stated otherwise.
Buy It Now
Free Shipping Condition: New Location: China Applicable PCB Size Simple manual stencil printer machine can be used in several specifications, suitable for all sizes of hand-printed silk screen. All ... moremodels of SMT Stencil Printer Manual adjust.
|
|
|
|
CANON BH8-1913-01 Board
CANON BH8-1913-01 Board ================================== FREE SHPPING FEE. CONDITION- USED VERY GOOD CONDITION A++++-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
CANON BH8-2552-01 Board
CANON BH8-2552-01 Board ================================== FREE SHPPING FEE. CONDITION- USED VERY GOOD CONDITION A++++-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
CANON BH8-2029-01 Board
CANON BH8-2029-01 Board ================================== FREE SHPPING FEE. CONDITION- USED VERY GOOD CONDITION A++++-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
CANON BH8-2494 Board
CANON BH8-2494 Board ================================== FREE SHPPING FEE. CONDITION- USED VERY GOOD CONDITION A++++-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
CANON BH8-2066-01 Board
CANON BH8-2066-01 Board ================================== FREE SHPPING FEE. CONDITION- USED VERY GOOD CONDITION A++++-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
Rotary Feed Table, Bellows Valvair
Rotary Feed Table Bellows Valvair Mod. B3111001 Ser No 7682. Table dia. 10 in, Stations 24. Table in good working condition when removed for product change. Unit has been tested, selling as is. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-145e5854c7b-0x115-
|
|
|
TDK FAK24-2R1 POWER SUPPLY
TDK FAK24-2R1 POWER SUPPLY ================================== FREE SHPPING FEE. CONDITION- USED VERY GOOD CONDITION A++++-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
VEXTA STEP MOTOR DRIVER DFC1514
VEXTA STEP MOTOR DRIVER DFC1514 ================================== FREE SHPPING FEE. CONDITION- USED GOOD CONDITION-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
PCISA-158V V4.1 Robot controller CPU BOARD SRCP-BN586
PCISA-158V V4.1 Robot controller CPU BOARD SRCP-BN586 ============================== FREE SHPPING FEE. CONDITION- Seller refurbished-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
Sony XC-77CE Machine Vision Camera Pick and place
Sony XC-77CE Machine Vision Camera pulled out form a working vintage Pick and Place machine that was dismantled for parts. Original LED illumination ring and lens included. 24-48h delivery available upon request(UPS from Portugal-aditional costs apply) If you have any question. Please ask before making you purchase. Thank you.
|
|
|
CONTEC AD12-16PCEH Board
CONTEC AD12-16PCEH Board ============================== FREE SHPPING FEE. CONDITION- Seller refurbished-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
MyData Feeder Magazine Board L-019-043-2B
MyData Feeder Magazine Board Part Number L-019-043-2B. Used in MyData Feeder Magazines Part is Used. Tested and Functional IslandSMT is a service-focused organization dedicated to providing customers with the highest level of support for Electronic Manufacturing and Test Equipment. We are based in Tampa. FL. We have approximately 10,000 sq. ft. that includes a pallet rack storage system and a diagnostic laboratory. Our remote sites are located in the United States and Mexico. We offer our clients a wide range of services and replacement parts. If you have any questions please contact us via the Ebay Message Forum. 813-880-8262, or sales@islandsmt.com Sold with a 30 day money back guarantee starting from Purchase Date Returns will not be accepted unless authorized by Island SMT. To receive an RMA(Return Material Authorization) number please ... moresend a message with Ebay's message. Please include the EBAY UserID. Item number and all details of the issue you are experiencing with the item. All items should be returned in their original packing materials. Including any manuals, cables, software, etc.
|
|
|
MDC 7712 pick and place machine
Bid with Confidence. I am a 100% positive feedback seller who represents my auctions fairly and accurately. This auction is for an MDC(also sold under the label Manncorp in the USA) 7712 Pick and Place robot/machine. Many startups started with this exact same machine. Adafruit. 3DRobotics come to mind along with other. It is a great entry level machine with capacity to do production runs. I did a lot of research before purchasing this from MDC in Japan. It is absolutely an incredible time saver to have this place your SMD parts either on a single PCB or a panel. Making panels is very easy. I have completely self-taught myself how to use this to make single assemblies and panels. Used by a small company start up company to assemble mostly 0402 and 0602 component sized assemblies. It has worked very well and pays for itself in allowing you ... moreto do your own prototypes and even assembly runs for production. The computer. Cables, all items listed below included(I've listed the current costs from the MDC site along side) MDC 7712, QTY, COST, AMOUNT, BASE, 1, $21.250.00, $21.250.00, AUTO TAPE ADV, 1, $680.00, $680.00, NOZZLES KIT 5x, 1, $300.00, $300.00, SOP VIB FEEDER 8 lane, 1, 2.125, 2125, 8mm Tape Cassette, 16, $400.00, $6.400.00, 12mm Tape Cassette, 2, $400.00, $800.00, 16mm Tape Cassette, 1, $565.00, $565.00, 24mm Tape Cassette, 1, $775.00, $775.00, 5 slot 8mm Tape Block Ctr, 3, $375.00, $1.125.00, 5 slot 8mm tape block Rt, 1, $375.00, $375.00, 4 slot 16mm tape block Rt, 1, $375.00, $375.00, mutlit block 12.16,24, 2, $375.00, $750.00, $35.520.00, Because this machine is lightly used and looks virtually like it did the day I received it the price is a very fair 25.000 to buy it now(vs 40k shipped from Japan for the same thing.or 50-60k to buy it here in the states new) All you need to add is the compressor(should be oil less one) Yes the computer. Monitor, keyboard are included. This machine has proven itself invaluable. I am no longer doing SMT assembly work at this time so this needs to find a new home. It
|
|
|
Schneider & Marquard 5700/049005 Micro Hole Punching System
Schneider& Marquard Micro Hole Punching System(5700/049005) Schneider& Marquard 5700/049005 Micro Hole Punching System Clippard G5 SDR 17.5 pneumatic punch BTS PS1200 Power Controller 3M 17" LCD touchscreen monitor P/N: 41-91367-117, If you have any questions please contact us prior to bidding. Phone: 805) 648-3300, Normal business hours are 8am- 5pm PST Monday through Friday, Recycled Goods is located at: 3820 N. Ventura Avenue. Ventura, CA 93001, PID 46847 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-146178a9441-0x10e-
|
|
|
(ma 200) PDR 1600 Evolution I Infrared BGA Rework System
ma 200) PDR 1600 Evolution I Infrared BGA Rework System This Infrared BGA Rework Station was powered up succesfully. We do not have the expertise to test the item any further. The item has signs of use such as scuffs and scratches but no signs of abuse. The only issue we encountered was the lamp control box did not seem to adjust anything on the unit when the dials were manipulated. Thank you for visiting our eBay store! If you have any questions. Just send us an email through eBay messaging. We strive to answer all questions as soon as possible. NOTE ON SHIPPING: Shipping is free for all U.S. customers living in the lower 48 contiguous states. All items will be shipped within 1 business day of completed payment. If you live in Alaska. Hawaii, or Puerto Rico: Your item will be shipped via USPS Parcel Select and can take up to 9 days to arrive. ... moreIf you would like the item shipped USPS Priority Mail. Please send us an email through eBay for additional shipping charges. NOTE FOR INTERNATIONAL CUSTOMERS: Please send us an email through eBay for a quote on shipping. All customs fees. Duties, import taxes, and related charges are solely your responsibility to pay. We have no ability to estimate those cost so please contact your local post office prior to bidding to understand your financial responsibilities upon arrival. The number code in parenthesis at the beginning of the title is an internal company inventory code. It is in no way affiliated with the actual title. Please do not hesitate to contact us with any questions or comments. Prompt. Friendly, and accurate service is our main priority. 140
|
|
|
Electrovert MINIPAK 300 WaveSolder Machine, USED
Electrovert WaveSolder Machine Model: MINIPAK 300 Serial Number: MPK3-15986-0402 220 Volts. 1-Phase, 60 Hz, 9.5 KVA Sold in as-is. W here-is condition. No refunds. Running condition. Freight shipping cost is buyers responsibility. We can load at no additional charge. Approx. 105" x 33" x 27" Approx. 2.000 lbs Address is 19 Park Ave. Hudson, NH 03051 We are a business with a dock. PLEASE FEEL FREE TO CHECK OUT OUR STORE: Why Buy from Us? We are proud of our feedback ETI cares about our reputation. And takes the time to resolve any issues that our buyers may have. Contactable Monday- Friday. 8:00 am- 4:00 pm EST@ 603-881-5253 Terms of Sale Please read the description carefully before bidding. And feel free to ask questions. By bidding on an item. The buyer agrees to our terms and conditions. If a problem does arise please feel ... morefree to contact us. Goods are checked before posting. However if faulty on delivery returns will be accepted with 7 days of arrival of goods. We offer exchange or a refund if a replacement is not available. Goods must be in original condition. Not tampered with in any way. Buyer is responsible for all return shipping charges. Payment Terms· PAYPAL/ CREDIT CARDS Delivery Method We are more than willing to ship worldwide. Just please email first so we can get you a shipping quote. Items will be shipped via UPS or USPS unless otherwise specified We do offer combined shipping when available. If you purchase multiple items. Please wait to be invoiced to give time to re-figure shipping charges. LOCATION Warehouse) Equipment Technologies. Inc. Hudson. NH 03051 Tel: 603-881-5253· Fax: 603-881-5304 e-mail:
|
|
|
LPKF Protomat 93S PCB Milling Machine Circuit Board Plotter
It came from working environment. Though I have no measure to inspect it thoroughly. I guarantee its working condition. In the unlikely event that it doesn't work as it should, buyer will be fully refunded, including costs for return. Photos show the actual item being sold. Nothing other than what is photographed will come with. Shipping via DHL Worldwide Express. International Sale: The item is located in Korea. The buyer is liable for tariff or any customs charge due to importation. So please verify the customs appraisement condition of your country before purchasing. Don't like the price? Please make an offer!
|
|
|
AMI Unloader / Reloader Model C5SR & M2ME
Template By Froo! AMI Unloader/ Reloader Model C5SR& M2ME This is an AMI Unloader/ Reloader System We were unable to test this unit other then to power it on Features: Reloader: Model C5SR- Serial 758776- 110 V- 60 Hz- 80/90 PSI- Unloader: Model M2ME- Serial 758776- 110 V- 60 Hz- 80/90 PSI Defects: None Detected Shipping: This item ships freight due to size and weight. Freight costs vary between $286- $626 depending on location. This item comes with our No Hassle Return Policy! We don't think you should spend hundreds- sometimes thousands of dollars on this"As Is- No Returns" Nonsense! We ship WORLDWIDE! Our goal is 100% customer satisfaction! International Bidders: Please contact us for shipping quote before bidding. As always. Please feel free to e-mail us with any questions. Please note: We have no history on this item. ... moreCosmetically it looks fine. But we don't have the capabilities to fully test. No accessories other then what is pictured is included with this item. We are Medical Specialists Inc- Cleveland OH 44280 330-460-3734 B5n/A130n About Us We have been selling quality merchandise for over 20 years at no risk to you! Every single one of our items is returnable and guaranteed for 90 days- unconditionally! Payment We accept payment by: Paypal. Mastercard, Visa, American Express, Company Check and Bank Transfer. Shipping We take great care packaging every item to ensure safe shipment to you. We charge only what the shipping company charges us- with nothing extra added on! We ship all major carriers. And will usually ship within one business day. Terms We warrantee and represent that the goods are as described in the above listing. We specifically disclaim any implied warranties of title. Merchantability, fitness for a particular purpose and non-infringement. Customers should satisfy themselves that any item choice made is suitable for their intended purpose or use. We exceed ebays return policy and give you a full 90 days to return any items. Returns Genuinely faulty goods wi
|
|
|
Air-Vac PCBRM-12, Solder Fountain/Re-Work Station
X-Axis Carrier Rail: Cantilever carrier rail adjusts to hold PCB up to 22” W x 21” D. Linear bearing guide. Along with a heavy duty ground steel rail, adds high rigidity to take up loads in all directions at a right angle to the axis for precise, smooth rail movement. X-Axis PCB Carrier Arms: Cast aluminum PCB carriers machined to exact tolerances to provide coplanarity between PCB and solder wave giving the operator consistent trouble-free soldering of components. PCB stops with reference scale provides one time set-up of repetitive assemblies. X-Axis Carrier Lock: Locks the X-axis carrier rail firmly in position. Z-Axis Adjustment Wheel: Fine tuning the height of the rugged carrier support mechanism is made easy with the front-mounted thumb wheel. PCB Locks: Holds PCB firmly in place for easy. Reliable removal or placement of components. ... moreTemperature Controller: A microprocessor provides two programmable set points: one for process temperature; and one for interlock and stand-by temperature. Digital readout of actual temperature is accurate within +/ 1% of full scale. Flow Wells: The shape of the flow well matches the component lead pattern. Solder is directed away from sensitive adjacent components. Thermo Protection System: An independent controller and thermocouple automatically shuts down the system when temperature exceeds a preset limit. Ground Jack: Operator to ground continuity insures ESD safe handling of assemblies. Component Location And PCB Hole Cleaning System: Locating arm for accurate alignment of component over the solder wave. Also positions air cleaning hood to clean hole pattern after component is removed. Low pressure air blows through component hole pattern for fast. Easy placement of new component and hands off soldering. Hole cleaning system is automatically activated through the timer mode or by the foot switch. Ramp UP/Ramp Down: Enables operator to fine tune the rate at which the solder wave comes in contact with the PCB and the rate at which the solder wave falls away
|
|
|
NanoMetrics 7200-016501 Interim Supply Analyzer/Compensator
NanoMetrics 7200-016501 Interim Supply Analyzer/Compensator Has general signs of normal wear and tear which may include scratches. Scuffs, dirt, sticker residue etc on the exterior casing. PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in pictures. Condition: Untested but appears to be in very good condition. Estimated Packed Shipping Weight: 10.00 lbs. Notice Regarding Freight: Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details Below) Lister: PH Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 4:00 pm(PST) Monday to Friday We are closed on Weekends and all major US ... moreholidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday. 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday Email Address: Contact us through Ebay's messaging system. Phone: 408-762-7283, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales Tax applies to all purchases in CALIFORNIA. All items will be securely packaged or palletized and shipped via the best and most economical way possible. We typically ship within 1 business day however. Under certain circumstances please allow up to 5 business days for handling; e.g. spec
|
|
|
Glenbrook RTX-113 X-Ray inspection system 2002 vintage
Working 2002 2D X-Ray system. W/ photo printer The RTX-113 is designed for heavy production environments where X-ray is used to inspect PCBs and assembled PCBs containing advanced components such as BGAs, uBGAs and Flip Chips.The system is very versatile and features Glenbrook's patented, award-winning X-ray camera technology that generates high-resolution, high-sensitivity images, revealing defects as small as 0.001 inch with a full one inch diameter field of view. The RTX-113 provides affordable real-time X-ray imaging, reliable operation and easy servicing.
|
|
|
Roto Trim PCB Board Card Lead Variable Trimmer Assembly POWERS ON NO SHIELD
Search our eBay Store! Roto Trim PCB Board Card Lead Variable Trimmer Assembly POWERS ON NO SHIELD SKU: JV-NIK-C-ROTOTRIM272 Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Roto Trim PCB Board Card Lead Variable Trimmer Assembly POWERS ON NO SHIELD. PLEASE NOTE: WE ARE UNSURE OF THE EXACT MODEL OF THIS TRIMMER· Unit powers on and indicator light is solid. When both safety releases are engaged. Unit appears to be operational. Variable switch for rotor is functional. Ground prong is missing. Dimensions(L”xW”xH” 22 x 12 x 18. As a large liquidator for many vendors. Our rating system ... moreis as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 6. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of th
|
|
|
Chemcut 547XLi Etch / Strip System
5 year old Chemcut 547XLi Etch/ Inspect/ Strip system with automated chemistry mixing and feed system. Cupric Chloride. 208v 3p. Excellent condition. SoCal location. One owner; light use.
|
|
|
***FT-0807 SMT Feeders for DIMA Pick & Place Machines***
FT-0807 SMT Feeders for DIMA Pick& Place Machines* Welcome. This auction is for FT-0807 Feeders for DIMA Manual Pick& Place Machines. These feeders are 8mm wide and hold a 7" reel. They are the specified part number for DIMA FP-100 through FP-700 Manual P&P Machines. The feeders are in very good condition overall and are fully functional. More will be available to the winning bidder. I can set up a B.I.N. sale for the winner for up to 12 additional feeders. Thanks for looking and be sure to check out my current auctions for other interesting items. If we haven't done business before. READ MY E-MAILS/TERMS SECTION. If we haven't done business in a while. READ MY E-MAILS/TERMS SECTION E-mails: Communication is a two way street. If you have a question. I will try to answer it. If you don't give me a clue as to which ... moreitem and auction number you're asking about, then I will just figure that you're one of those scammers and ignore you. If you don't have a name included, then I won't know who to reply to. Shipping is figured for the winning bidder ONLY! This include both domestic and foreign. I've had as many as 14 requests for shipping estimates cc on a single auction! And not one of them bid! SECRET INFO! There seem to be many who think that I have"secret information" about the items that I sell. And that I don't include said secret info in the descriptions, but will tell them if they write me. Trust me, if I know something about an item, I put it in the description, even the"bad stuff" I've bought items that were underdescribed or outright lied about. Those sellers got negged, I don't want the same happeing to me, besides it inhibits repeat"bidness" Payment& Terms: Paypal. Any other payment system that does NOT require that I sign up or pay a fee to receive funds. Have another payment plan? e-mail me. If it doesn't involve a personal or business check. We can talk. is set for 10 business days. That translates into about
|
|
|
Philips Yamaha Assembleon CSM 8x4 8mm feeders for FCM / GEMLine / CSM
This is an 8mm Yamaha/Philips Assembleon mechanical/pneumatic feeder used on FCM I. GEMLine, and CSM SMT machines. Works great, no issues. Thanks for looking!
|
|
|
PEAK715VL-HT(LF) PEAK-715-HT 2.53GHz CPU & 512MB DDR1 PC3200 CL3 LAM Free Ship
PEAK715VL-HT(LF) PEAK-715-HT 2.53GHz CPU& 512MB DDR1 PC3200 CL3 Blade Free Ship- FREE SHPPING FEE. CONDITION- TAKEN FROM A WORKING EQUIPMENT"TESTED-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- ... morePaypal Only
|
|
|
COGNEX VISION BOARD VPM-8100Q-000 RevE 801-8120-01F&VISION SELECTOR BOARD MPL3-V
COGNEX VISION BOARD VPM-8100Q-000 RevE 801-8120-01F& VISION SELECTOR BOARD MPL3-V& CABLE- FREE SHPPING FEE. CONDITION- TAKEN FROM A WORKING EQUIPMENT-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- ... morePaypal Only
|
|
|
Super M.O.L.E. Gold Xpert Ready Oven Profiler with Accessories and Case
Electric Controls Design Xpert Ready Super M.O.L.E. Gold Oven Profiler with some accessories. This unit was pulled from a working environment(PCBA manufacturing plant) The unit and accesories come in a case as shown in the pictures. What you see in the pictures is what you will receive. I ship inside continental USA only. Returns are accepted within 14 days and buyer pays return shipping.
|
|
|
Essemtec CSM 740i Intelligent Feeder 8 mm ( PANTERA-X compatible)
For sale feeder for a Essemtec PANTERA-X pick-and-place machine. These I have a total of 101 of this model feeder. All have only been used for approximately 400 production hours. If you are interested in bulk purchase I am open to a discount. Below are some additional Essemtec feeders that can include din bulk purchase. CSM 760i stick feeder(Qty 1) CSM 741i Intelligent Feeder 12 mm with tape reel holder 7" Qty 4) CSM 742i Intelligent Feeder 16 mm with tape reel holder 7"13" Qty 4) This item is for sale privately and the auction may be ended at any time.
|
|
|
Automation Unlimited AS1000B Single Point Selective Soldering Robot - Works 100%
AUTOMATION UNLIMITED AS 1000B(with Users Manual) Single Point. Selective Robotic Soldering Machine In full working order. Currently in production use Original machine cost was over $80.000(circa 2001. We purchased this machine used from BAE systems about one year ago. It's been used in production on a project that is now ending. AU(AUTOMATION UNLIMITED) SPECS: Easy to program Fully automated. Vision Camera CV M1250K S/N: N128138 Brand new METCAL MX-500 soldering system SURE-TOUCH auto height sensing option Part handling system MC3 Motion Control Computer TEKNIC stepping motor M-2358-FH: http:www.teknic.com/files/product_info/2348_V3.3.pdf AU B16-98-01 AU AS 1000 B S/N: 0497 Fume Extractor: MULTI ARM EVAC II 8888-0825 AU 931-124-008 S/N: 0998 AU 611-208-057 S/N: 0996 WILKERSON COLESCING FILTER: B08-02-FKG0 ALL REASONABLE OFFERS WILL BE ... moreCONSIDERED· BAE Asset# GB28WB(previously) Automation Unlimited S/N: 0497· Hz: 50/60· 115V· DIMENSIONS: L: 40" W: 54" H: 58" Weight TBD. Local Pickup or buyer to arrange shipping. Shipping to North America Only. Freight Quote Available Upon Request. Any questions. Please call George: 818-298-2076
|
|
|
Cyberoptics LSM Large 110 Solder Paste Measurement PCB Laser Microscope LSM 500
Very Nice Cyberoptics LSM For Sale in Good Working Conditon! See attached pictures and information below. Cyberoptics, Model Number: LSM/LRGE-110, Serial Number: 5718, Year December 1994, Type: Laser Section Microscope, Measures Solder Paste Height and Registration, Measures in mils and microns, High Resolution Monitor, Solid State CCD Camera, Dimensions: 36 x 24 x 22 inches, Weight: 132 lbs. 120V- 50/60 HZ- 1 Amp, Buyer is responsible for all shipping charges from our Boston. MA location. We can set up packaging. Skidding, crating, and ship to countries overseas by boat or airplane. Please let us know if you have any questions or concerns. Contact: Bill 978-790-2774 We also have a Cycberoptics LSM 500 available if interested in a second unit!
|
|
|
Yamaha/Philips/Assembleon KW1-M1100-021 Feeders
Yamaha/Philips/Assembleon KW1-M1100-021 Feeders In Used Condition(Un-Tested) All Are In Good Mechanical Condition. No Missing Parts Contact Me For More Info:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1468f303a4d-0x10b-
|
|
|
Statfree CV Desco Inc Anti-static ESD floor mat w/ground snap 4' x 11' x .125"
This is a Desco Industries Statfree CV ESD floor mat. It was removed from a working ISO certified PCB lab. Snap for ground cable is in place but the cable is not included. Specs for the CV floor mats can be found on the Desco or ESD Systems website. This particular mat is a.125" thick. It measures approximately 48" x 132" We have several pieces available and all are similar to the one shown in the photo. All have the snap in place but not all have the label around the snap. This flooring was used over carpet so the residue you see on the back in the pictures is where carpet tape was used to affix it to the carpet. I am helping an R&D firm liquidate items it no longer needs or uses. We have other ESD mats available. Including new, so check our other listings.
|
|
|
DEK 265 ARCOM power supply
Up for purchase is a DEK ARCOM power supply. Item worked great when removed from a decommissioned DEK 265. Power supply was purchased new from DEK in 2012. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-146a3962a56-0x10a-
|
|
|
JUKI 760L fine pith pick and place smt assembly machine prototyle high PnP Pcb
JUKI 760L fine pith pick and place smt assembly machine prototyle high PnP Pcb Powered by Juki 760L Serial J2370. Fine pitch pick and place assembly machine very capable- very stable easy to use pick and place system. Two-head Laser Alignment System. Machine is spec'd to place down to 0402- with special nozzle and feeder is capable of placing down to 020. The KE-760 incorporates two large laser heads plus a grayscale vision system which can handle components up to 50mm square. Vision recognition capabilities include all ball inspection which detects missing or abnormal balls on BGAs and split recognition for centering connectors up to 150mm long. Power Requirements: 208. 220, 240 VAC, single phase, 50/60 Hz, 3 KVA. Program Size: Maximum 2.000 placements per circuit/ Maximum 100 non-matrix or 400 matrix circuits per PCB. Self-Calibration: ... moreSelf calibration routine allows operator to recalibrate at anytime in just minutes. Up and Down Line connection: SMEMA standard. Teach Camera: Allows teaching of placements with one of two CCD cameras mounted on the head assembly. Auto Tool Changer: The tool changer holds up to sixteen(16) vacuum nozzles. Placement Heads: Two(2) high speed assembly heads driven by an overhead X/Y gantry positioning system with closed-loop twin AC servo motors and magnetic linear encoders. Component Centering: Non-Contact TouchLess Centering(TLC) using LaserAlign Sensor or upward looking gray scale vision centering. Laser Coplanarity Inspection option for fine pitch SMDs. Placement Accuracy: LaserAlign: +/0.0015" +/0.04mm) on QFPs(with local fiducials) +/0.0039" +/0.1mm) on chips. Placement Rate: 0.32 sec.component(throughput will depend on PCB size and component mix) Dimensions with LaserAlign: 0.04" x 0.02" minimum to 1.32" x 1.32" maximum(1mm x 0.5mm minimum to 33.5mm x 33.5mm maximum) Height: 0.012" minimum to 0.39" maximum(0.3mm to 10mm) Dimensions with Vision Centering: Varies by component type: QFP: min. 0.31" x 0.31" 8mm x 8mm) max. 1.9
|
|
|
DEK Horizon 03i Automatic screen printer gridlock, USC, 2D, blue cleaner nice!
DEK Horizon 03i Automatic screen printer gridlock. USC, 2D, blue cleaner nice! Powered by DEK Horizon 03i 2006 Vintage 09SP08 Software version Adjustable stencil mount Gridlock board support- 4 rails Hawkeye 2DI- hawkeye 750 Blue 520mm USC under stencil cleaner with solvent tank(remote mount) one set of squegees included machine condition in-line with its age. unit is in operational condition as shown in video below. Pay with your credit card through PayPal. All in state residents within our state will be charged state and/or local sales tax at the time of checkout. Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Packages are usually shipped within 48 hours of payment receipt(excluding Saturday/Sunday) Shipping ... morecosts for all orders can be determined by the shipping calculator in this auction. All orders are shipped via UPS. FedEx, DHL, or USPS. International buyers, please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. PFI of Florida: 607 Savage ct longwood. FL 32750 Telephone: 4078224499. All items are sold as-is. We accept returns only if the item was not as described in the auction. Buyer must return the item exactly as received within 7 days and will be responsible for all additional shipping charges. We do our best to present accurate. Detailed information about every item we sell. If you have any questions, please contact us before placing your bid. PFI of Florida has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type. Condition and image of the goods at the time of sale. PFI of F
|
|
|
DEK Horizon Screen printer 2004 vintage blue under screen cleaner windows nice!
DEK Horizon Screen printer 2004 vintage blue under screen cleaner windows nice! Powered by Dek Horizon(MFC platform) 2004 vintage condition- better than average. Machine very nice. blue under screen cleaner with 14" plenum 250mm board clamps(can convert to larger if needed) Graphite camera. Newer windows software manual screen load. Simple- easy to use automatic screen printer. Pay with your credit card through PayPal. All in state residents within our state will be charged state and/or local sales tax at the time of checkout. Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Packages are usually shipped within 48 hours of payment receipt(excluding Saturday/Sunday) Shipping costs for all orders can be determined ... moreby the shipping calculator in this auction. All orders are shipped via UPS. FedEx, DHL, or USPS. International buyers, please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. PFI of Florida: 607 Savage ct longwood. FL 32750 Telephone: 4078224499. All items are sold as-is. We accept returns only if the item was not as described in the auction. Buyer must return the item exactly as received within 7 days and will be responsible for all additional shipping charges. We do our best to present accurate. Detailed information about every item we sell. If you have any questions, please contact us before placing your bid. PFI of Florida has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type. Condition and image of the goods at the time of sale. PFI of Florida makes no express or implied wa
|
|
|
Universal GSM Pick and Place Camera – Used
Description: This is a Used Universal Brand GSM Pick and Place Camera. It does have some normal wear on the side of the casing. But is in fully working and operating condition as of a year ago. The Part# is(47063102) Serial# 484 4M) Was removed off the machine for an upgraded version of this camera. All of the plug-inn’s look to be in great shape as well as the pins in the back. No front mounting screws included. We also have just about any other part that you may need for your Universal GSM or DEK ELA printer. Just let us know what you’re looking for and we will do our best to find it and have the piece posted ASAP. For Questions. Email:
|
|
|
DEK 265 SMEMA card 140532
Up for purchase is a used DEK 265 SMEMA interface card. Item pulled from a decommissioned machine. Card still worked great when removed. Will work with all DEK 265 variant screen printers. Guaranteed not DOA. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146a613edd1-0x128-
|
|
|
CORECO IMAGING OC-VIPB-PD000 PCI FRAME GRABBER BOARD
CORECO IMAGING OC-VIPB-PD000 PCI FRAME GRABBER BOARD- FREE SHPPING FEE. CONDITION- TAKEN FROM A WORKING EQUIPMENT-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
Manncorp/Autotronik GMBH - 8mm Half-Step Feeders MC Series Pick & Place Machines
These feeders has been very lightly used and are in excellent condition. They have been closely inspected and tested and any parts that showed wear have been replaced. They are almost like new.
|
|
|
CFM 13-798 Valve Module Pneumatic Controls Festo IC-8M3/2-0, 9-24 PH, 24:Volts
Festo Module Solenoid Valve Model No: 13-798/ IC-8M3/2-0.9-24-PH Serial No: 0792/ Max. Bar: 6/ Max. PSI: 87 D402- 58511/ 24-Volts DC Solenoid Valve with 8 Festo MEH Valves Model No: MEH-3-0.9/ 118-248 220-Volts. 1.6-W/ IPOO/65 Festo module solenoid valve Model no: 13-798. IC-8M3/2-0,9-24-PH Serial no: 0792 Max. bar: 6 Max. psi: 87 D402-58511 Voltage: 24 volts DC Festo MEH valves model no: MEH-3-0.9/ 118-248, 220-volts, 1.6-w/ ipoo-65, Festo Pneumatic Controls with Festo Module- No casing. Hoses and wiring is still attached. MEH Valves are pneumatically actuated. Manifold mounting Condition: Used item. Untested. Sold as-is. Item was apart of a working circuit board. some wear& tear, very little scuffs& scrapes. otherwise looks in good condition. What you see is what you get! Pictures are taken at the time of listing. If it's not ... morein the photos. It's not included in the lot, unless otherwise stated directly in the ad. Available for local pick up at our office in Hayward. California Shipping quoted includes any packaging& handling fees plus UPS Ground(5-7 days) Insured, to the lower 48 States only. Orders to Hawaii& Alaska will be filled only if item can be shipped by US Postal Flat Rate Box. Puerto Rico orders will ship by USPS Parcel Post and cannot be tracked after they have left the United States. If you need it shipped elsewhere. Please contact us for a shipping quote. Depending on your location, your shipping may be less, in which case we will refund the difference. Returns are accepted within 14 days. Re-stocking fees may apply. Please see our full return policy for details. If there is any problem with your order. Please contact us! We’re happy people and we like it when our customers are happy and satisfied, too! We leave feedback once or twice a month. Leave us a good feedback and we'll leave you good feedback in return. If you have questions or concerns. Please message us, or call Liz or Rashida at 510-784-1111. We're here Monday-Friday. 8 am- 4:30 pm PST, and at other times
|
|
|
Matrox Odyssey XPro OP413G5MSFCL Imaging Card 63039621500 Y7027 Y7116-04
Included: Matrox Odyssey XPro OP413G5MSFCL Imaging Card Unit shows minimal signs of use and is in good working condition. Item is guaranteed non-DOA and is covered under our 14-day return policy. Only items pictured are included. If a part is not pictured or mentioned in the description then it is not included in the sale. There may be licensing software or drivers required for some of the network equipment we sell. If those items are not pictured or mentioned in the description they are not included in the sale. If you are unsure about any aspect of this item please send an email and ask questions before bidding.We do offer combined shipping discounts and free local pickup. Email for details. ISO 14001:2004 CERTIFIED RESPONSIBLE IT HARDWARE DISPOSITION OceanTech is an innovative Minnesota-based company with a highly developed and rapidly ... moregrowing redistribution network of products and materials from end-users to consumers. It is our mission to use this network to become the best reuse organization in the marketplace. We provide an environmentally friendly. Liability-free electronic recycling and asset management service. Our processes are specifically designed to bring value back to our customers and reduce the amount of equipment entering the waste stream. Our objective is to save you and your company money by providing you with the most efficient way to dispose of your surplus or no-longer-needed electronic equipment. We offer a variety of options. All of which are aimed at helping you move your surplus equipment with no hassle to you. Please use the eBay message system under the"contact seller" hyperlink. If you are interested in these services. OUR GUARANTEE 14 DAY RETURN POLICY: We want our Customers to be happy with their purchases. So customers are welcome to return items within the first 14 days of receiving the item if they are unhappy with the item. There will be a 20% restocking fee on any 2nd return from the same customer that are not due to a hardware failure within the first 14 days of rec
|
|
|
WSB-9454-R10 Rev1.0 & PX-10S-RS-R40 Rev4.0 & INTEL PRO/100M & M-8/LPCI Etc.
WSB-9454-R10 Rev1.0& PX-10S-RS-R40 Rev4.0& INTEL PRO/100M& M-8/LPCI Etc. FREE SHPPING FEE. CONDITION- TAKEN FROM A WORKING EQUIPMENT# Module List- WSB-9454-R10 CPU BOARD REV 1.0- 1GB RAM 2ea- PX-10S-RS-R4 Rev 4.0 MOTHER BOARD- INTEL(R) PRO/100M DESKTOP ADAPTER LAN CARD- M-8/LPCI MULTI PORT- GV131-71007 PORT ETC. SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the ... moreoriginal postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
JUKI / ZEVATECH NOZZLE #203 700-SERIES "Slightly Used OEM"
JUKI/ ZEVATECH Pick& Place Nozzle#203"Slightly Used" MANUFACTURED BY JUKI(OEM) Fits JUKI& Zevatech Pick& Place Models: 730. 740, 750, 760 ====================================================================================== Also available: Nozzles for JUKI 2000-Series(Nozzle#500 through 508) are also available. Pricing starting at $189.00 ======================================================================================= If you have any questions or concerns. Please contact me prior to bidding. California Buyer's- an 8.75% state sales tax will be added to the final price. International buyers please contact me for shipping costs. NOTE: This auction is for ONE nozzle. Thank You for your interest. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps.
|
|
|
SMT SMD feeders pick and place machine Fuji Big reel 27 pieces feeder ALPC W12
You are bidding on 27 pieces of SMT feeders. W12 x P8 ALPC-9370 16pcs W12 x P8 ALPC-9330 5pcs W12 x P8 2pcs W12 x P8 Tantal-D 2 pcs W12 x P4 1pc Custom 1pc This item was removed from working service. We have no way to test these feeders. All our ebay auction items are available for viewing at our wholesale outlet. Excess Solutions 156 S. Milpitas Blvd. Milpitas CA 95035 Please see our website www excesssolutions com for hours of operation. Terms and fine print. Shipping Buyer pays Shipping. Handling, and Packaging. We ship via UPS ONLY. We DO NOT ship via United States postal service. We do not ship to PO boxes. APO/FPO. For international shipping please contact us for a quote. We will always try to combine shipments. Please contact us after your purchase. Payment We accept Paypal. Credit cards Visa-M/C-Discover. We also accept all other ... morestandard forms of payment that ebay has deemed not real. We accept credit cards Visa-M/C. We also accept all other standard forms of payment that ebay has deemed not real. We do not ship until money has cleared our bank. International orders must be bank to bank wire transfer or credit card. All California residents must add 8.25% sales tax. Or provide a signed CA resale certificate. Auction Policy Winning bidders must acknowledge within 3 business days after auction close. Payment must be received within 7 days after order is confirmed. Non paying bidder will be filed after 10 days of no contact. We reserve the right to cancel bids of any users with negative feedback or bid retractions. We do our best to accurately describe the item for sale. However we are not responsible for typographical errors. Some of our items advertised may be used and have scratches etc. from normal wear. Any additional imperfections will be listed in the description. Orders will be shipped within 3 business days upon confirmation of payment. All auction sales are final. No refunds are available. We can only issue an exchange for the following reasons: Incorrect Quantity. Incorrect Item Shipped, Freight
|
|
|
SMT SMD feeders pick and place machine Fuji Big reel 30 pieces feeder ALPC W12
You are bidding on 30 pieces of SMT feeders. W12 x P8 ALPC-9800 W16 x P12 ALPC-9820 W24 x P12 ALPC-9450 W16 x P12 ALPC-9430 W16 x P8 ALPC-9410 W16 x P8 ALPC-9810 W24 x P12 ALPC-9830 This item was removed from working service. We have no way to test these feeders. All our ebay auction items are available for viewing at our wholesale outlet. Excess Solutions 156 S. Milpitas Blvd. Milpitas CA 95035 Please see our website www excesssolutions com for hours of operation. Terms and fine print. Shipping Buyer pays Shipping. Handling, and Packaging. We ship via UPS ONLY. We DO NOT ship via United States postal service. We do not ship to PO boxes. APO/FPO. For international shipping please contact us for a quote. We will always try to combine shipments. Please contact us after your purchase. Payment We accept Paypal. Credit cards Visa-M/C-Discover. ... moreWe also accept all other standard forms of payment that ebay has deemed not real. We accept credit cards Visa-M/C. We also accept all other standard forms of payment that ebay has deemed not real. We do not ship until money has cleared our bank. International orders must be bank to bank wire transfer or credit card. All California residents must add 8.25% sales tax. Or provide a signed CA resale certificate. Auction Policy Winning bidders must acknowledge within 3 business days after auction close. Payment must be received within 7 days after order is confirmed. Non paying bidder will be filed after 10 days of no contact. We reserve the right to cancel bids of any users with negative feedback or bid retractions. We do our best to accurately describe the item for sale. However we are not responsible for typographical errors. Some of our items advertised may be used and have scratches etc. from normal wear. Any additional imperfections will be listed in the description. Orders will be shipped within 3 business days upon confirmation of payment. All auction sales are final. No refunds are available. We can only issue an exchange for the following reasons: Incorrect Quantity. Incor
|
|
|
SMT SMD feeders pick and place machine Fuji 46 pieces feeder w24 w16 w32 46pcs
You are bidding on 46 pieces of SMT feeders. W24 x P12 10pcs W24 x P16 24pcs W16 x P12 4pcs W24 x P8 1pc W32 x P24 5pcs W12 x P8 1pc W16 x P8 1pc This item was removed from working service. We have no way to test these feeders. All our ebay auction items are available for viewing at our wholesale outlet. Excess Solutions 156 S. Milpitas Blvd. Milpitas CA 95035 Please see our website www excesssolutions com for hours of operation. Terms and fine print. Shipping Buyer pays Shipping. Handling, and Packaging. We ship via UPS ONLY. We DO NOT ship via United States postal service. We do not ship to PO boxes. APO/FPO. For international shipping please contact us for a quote. We will always try to combine shipments. Please contact us after your purchase. Payment We accept Paypal. Credit cards Visa-M/C-Discover. We also accept all other standard forms ... moreof payment that ebay has deemed not real. We accept credit cards Visa-M/C. We also accept all other standard forms of payment that ebay has deemed not real. We do not ship until money has cleared our bank. International orders must be bank to bank wire transfer or credit card. All California residents must add 8.25% sales tax. Or provide a signed CA resale certificate. Auction Policy Winning bidders must acknowledge within 3 business days after auction close. Payment must be received within 7 days after order is confirmed. Non paying bidder will be filed after 10 days of no contact. We reserve the right to cancel bids of any users with negative feedback or bid retractions. We do our best to accurately describe the item for sale. However we are not responsible for typographical errors. Some of our items advertised may be used and have scratches etc. from normal wear. Any additional imperfections will be listed in the description. Orders will be shipped within 3 business days upon confirmation of payment. All auction sales are final. No refunds are available. We can only issue an exchange for the following reasons: Incorrect Quantity. Incorrect Item Shipped, Freight Damage Sh
|
|
|
Cast Aluminum SMT Stencil Frame14"x14" (12"x12"). EMS, SMD, PCB, Surface Mount
This listing is for one(1) Cast Aluminum SMT Stencil Frame measuring 14"x14" outside dimensions. 12"x12" inside. We have 6 available. All are in good used condition. With some or all of an old stencil that will need to be removed before applying your own stencil. Some frames have mesh, some do not. These are the only ones on ebay and they're priced to sell- don't let them get away! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-146a9dbc33e-0x111-
|
|
|
Pace Thermoflo Precision Solder Rework Station PPS 95 BGA/SMD Part 7008-0219-01
This is a nice Pace Thermoflo soldering rework station. Powers on. Heats up, and vacuum turns on. Comes with very nice table/jig. Came out of small production experimental lab. Sold as is. Shipping will be $75 in the continental USA only. May have to partially disassemble the table prior to shipping.
|
|
|
GENRAD SRT 1100 REWORK STATION WITH LEICA MS5
YOU ARE BIDDING ON ONE GENRAD SRT 1100 REWORK STATION WITH LEICA MS5 AND JVC TK-C1380 CAMERA SERIAL NUMBER 1561 230 VOLT 30 AMP 50/60 Hz 1 PHASE. THIS IS USED SURPLUS REMOVED FROM A WORKING FACILITY AND IS GUARANTEED WORKING. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MW) SHIPPING IS FOB OUR DOCK IN MESA. AZ 85205 AND WILL SHIP WORLDWIDE. PLEASE CALL OR EMAIL FOR SHIPPING QUOTE. LOCAL PICKUPS ARE ALWAYS WELCOME. International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International ... moregovernment regulations prohibit such behavior. Check out my! Be sure to add me to your! 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-146a9dbc252-0x110-
|
|
|
A.P.E. Flo-Master Hot Air Rework Reflow Desolder Station with X&Y Axis Table
A.P.E. Flo-Master Hot Air Rework Reflow Desolder Station with X&Y Axis Table This is an A.P.E. Flo-Master Desolder/ Rework/ Reflow Station. This was obtained from a government auction. The paperwork that was with it claimed that it was in good condition. And was replaced by a newer model. This appears to be the original first generation of the A.P.E. Flo-Master units. I could not find much on this. From the photos of the newer ones it appears that there may a part of the X&Y axis table missing. I am including photos of the entire unit so that you can view the item from all angles. Also. The little suction tip is loose and moves around, although the air/ suction works great when the machine is turned on. Maybe it is supposed to be loose. I am not sure. The item powers up and heats up quickly, and appears to be in good working condition ... moreto the limits of my knowledge. This had a sticker on the side that listed its acquisition value as multiple thousands of dollars. The components inside all sell regularly. So I am listing it at the Ebay value of its internal components. If it does not sell within a month then the listing will be cancelled and the unit will be parted out for sale of the individual internal components. You will receive this item as pictured. No other parts or accessories will be included. Shipping will include insurance. And the item will be carefully and professionally packaged to avoid damage. 60-Day Guarantee! Policies AspenGrove Surplu s strives to make sure you are completely happy with your purchase. Our goal is to offer you quality products with fast& friendly service. SHIPPING: All packages will be shipped the following business day after payment has cleared. Exceptions can be made upon request for expedited or overnight delivery if needed. On certain listings shipping cost is calculated to your zip code through the Ebay/ USPS website calculator. Using estimated packaged weight of the item as well as accounting for shipping insurance and actual packaging costs. RETURNS: Item must b
|
|
|
Yamaha/Philips/Assembleon KW1-M1100-030 Feeders
Yamaha/Philips/Assembleon KW1-M1100-030 Feeders In Used Condition(Un-Tested) All Are In Good Mechanical Condition. No Missing Parts Contact Me For More Info
|
|
|
SMT machines, 2 Multitroniks LVX 2000
This sale is for 2 used Multitroniks LVX one with upward facing camera. New flash drive, adjustable board holding table. 0ver 60 8 mm feeders and some 12 and 16 mm feeders, These machines were running and we began rebuilding as a project and one is placing perfect using double sided tape but needs blow-down adjustment for actual production. Other can run or use as parts machine to have a very nice small production machine. There are some nozzles and new ones available from Europe. A Multitroniks user group is active on Google and is very helpful. All manuals are included. The Mulitroniks has many good features and a diverse menu for parts inventory and identification for easy and repeat programming. These can be picked up in Albany Oregon or crated or palatalized for shippment for a minor charge.
|
|
|
ANORAD 7"x9" 44Pin Extender PCB # 2471-B
Anorad 7"x 9" 44Pin Extender PCB# 2471-B
|
|
|
Passaat reflow oven SMRO0405
This oven only has a mesh chain. Serial number is 9740541our company bought out another business we did not need this item they said oven worked we have never put power to it.Has monitor and computer in bottom storage compartments. We will load on a trailer for buyer 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-146aab90745-0x116-
|
|
|
SLIM KIC-II KIC II TRANSMITTER DATA LOGGER
Used. Slim KIC-II Transmitter Data logger. Great working condition. Good cosmetic shape. Item was purchased at auction from electronic company shutting down for business. I'm not technically knowledgeable about its application other than it was used for data logging in wave soldering process. hopefully you will recognize it. Selling what you see in these twelve photos only. No manual. Cd-rom or any other accessories not seen in this listing. Questions are welcomed. U.S.A. shipping to 48 contiguous states only. Will be shipped via fedex. Paypal only method of payment accepted
|
|
|
OLAMEF MOTORE 122 LEAD FORMER ITALY
OLAMEF MOTORE 122 LEAD FORMER ITALY. WORKING UNIT. IT TURNS ON AND VARIABLE SPEED WORKS. NOT SURE IF IT IS COMPLETE OR WORKS INLINE WITH SOMETHING ELSE BECAUSE THERE IS A GEAR AND A BELT ON THE SIDE THAT IS NOT CONTACTED WITH ANYTHING.
|
|
|
ESD shoe straps
Used ESD shoe straps with only a week of use. Excellent condition.
|
|
|
TURCK INDUCTIVE SENSOR NI 3-EH6.5K-Y1 ID 1004700 CONNECTORS MOUNTS & PIGTAIL
TURCK INDUCTIVE SENSOR NI 3-EH6.5K-Y1 ID 1004700 CONNECTORS MOUNTS& PIGTAIL Up for bid is a TURCK INDUCTIVE SENSOR part NI 3-EH6.5K-Y1. ID# 1004700. They come with CONNECTORS. MOUNTING BRACKETS, and PIGTAILS. Click for manufacturers site and detailed information. These were removed from a computer chip manufacturing machine being parted out. I am told these were removed from a working machine. USPS PRIORITY MAIL My Policies: TERMS PAYMENT DUE WITHIN 8 DAYS OF AUCTION CLOSE PA RESIDENTS MUST PAY SALES TAX We take Pay-Pal payments& other forms of ebay approved& NON APPROVED payments. We do not take credit cards directly- only thru PayPal. We only ship by UPS. USPS or TRUCK& have UPS daily pickup. Payment received by Noon will usually ship(UPS or USPS) same day- otherwise next business day. Truck shipments will ship within 2-3 ... morebusiness days. You are buying only what is shown in the pictures unless otherwise stated in the description! Any currency or coins shown in pictures are for size reference only and are not included in the auction. UPS/ TRUCK SHIPPING INSTRUCTIONS Any above shipping instructions(like truck shipping) take precedence over these UPS instructions Buyer pays shipping costs as shown by the eBay shipping calculator Shipping will be by UPS or USPS ONLY unless truck shipping applies-Cost can be checked by entering your zip code in the eBay shipping calculator-If calculator will not work for your zip or the item is truck ship only then it is the buyers responsibility to contact me for a shipping quote before bidding! ABSOLUTELY NO FEDX- NO COD OR SHIPPING ON ANOTHERS ACCOUNT# If you are a Canada buyer or the item is truck ship We MUST have your phone# for the shipping paper work before We can ship. We use a SEALED AIR FOAM PACK SYSTEM& pack most larger items in expanding foam packing to insure undamaged shipping. CANADA BUYERS Due to MANY-MANY problems with Canada buyers not being aware of customs duties and UPS broker fees + other costs we currently will not allow you to bid unless y
|
|
|
Teli Tokyo Electronic Industry Machine Vision CCD 3 Triple Camera W/ LED Ring
Teli Machine Vision CCD triple Camera pulled out from a working vintage Pick and Place machine that was dismantled for parts. Original LED illumination ring(with small damage. Easily repairable, on the pcb) and lenses included. 24-48h delivery available upon request(UPS from Portugal-aditional costs apply) If you have any question. Please ask before making your purchase. Thank you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-146aab90623-0x10f-
|
|
|
Selective Soldering System, SEHO Selective Solder GOS LIGHT
Selective Soldering System. Selective Soldering Machine, SEHO Selective Solder GOS LIGHT• 2009 with a Teach and Viewing camera! Refurbished 2011! Model GOS Light• Auto solder feed• Top side Pre-heat w/pyrometer• Selective Bottom side pre-heat• Micro Drop-Jet fluxer• Fiducial Recognition• Solid Steel Frame• Axis System for High Positioning Accuracy& Repeatability• 3-Axis-system Flux. Preheat& Solder unit• Single Lane In-Line Operation for Bare Boards or Carriers• Automatically adjust Conveyor width• Maximum Conveyor Width: 15.75" Minimum Conveyor Width: 0.12" Front Fixed Pin Chain Conveyor Rail• Pin Length: 0.12" In-Feed Height: 33.46" SMEMA) Micro Drop Jet Fluxer• Level Control of Flux Container• Pot containers Lead Free Solder Included: Nozzles: 3mm. 4mm, 5mm, 7mm, and 9mm• Ladle and Scraper• T-handles tool for ... morepot removal• T-handle tool for pump removal• Solder that is in the Pot: SN100C• Machine Manuals Buyer is responsible for shipping. You can use your preferred carrier or we can put you in contact with one of our reliable carriers. We can also package. Ship anywhere in the US, Overseas and arrange shipping by Ocean or Air Freight for an extra cost. For electronic sensitive equipment, we recommend Air Ride truck transport. We have been in the SMT Equipment business since 2004. If you have any questions or concerns please let us know. Thank you and we look forward to doing business with you.
|
|
|
Philips Assembleon FCM PA 2754/00 PPU Part Module
Phillips Assembleon FCM PA 2754/00 Location: C 1305 Specs Part Number: PA 2754/00 Description Here is an Assembleon part. We believe this part goes on the PPU modules. But are not entirely sure what it does. This is new in the box as shown. The price is per part as shown. Shipping Feel free to e-mail us at motionconstrained@gmail.com if you have any questions. Shipping quotes are available under the shipping tab. We always combine shipping for multiple items purchased. Just ask for a revised invoice. free customisable galleries from
|
|
|
MyData Linescan Camera L-010-0450
MyData Linescan Camera Part Number L-010-0450. Line Scan Camera used in MyData MY9. MY12, MY15, MY19 Machines. Part is Used. Tested and Functional IslandSMT is a service-focused organization dedicated to providing customers with the highest level of support for Electronic Manufacturing and Test Equipment. We are based in Tampa. FL. We have approximately 10,000 sq. ft. that includes a pallet rack storage system and a diagnostic laboratory. Our remote sites are located in the United States and Mexico. We offer our clients a wide range of services and replacement parts. If you have any questions please contact us via the Ebay Message Forum. 813-880-8262, or sales@islandsmt.com Sold with a 30 day money back guarantee starting from Purchase Date Returns will not be accepted unless authorized by Island SMT. To receive an RMA(Return Material Authorization) ... morenumber please send a message with Ebay's message. Please include the EBAY UserID. Item number and all details of the issue you are experiencing with the item. All items should be returned in their original packing materials. Including any manuals, cables, software, etc. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-146ab0699f8-0x10a-
|
|
|
MyData Dual Vision Camera L-040-1076
MyData Dual Vision Camera Part Number L-040-1076. Used in Dual Vision Camera(DVC) used in MyData TP9-4. TP11, TP12, TP18, MY9, MY12, MY15, M19 Machines. Part is Used. Tested and Functional! IslandSMT is a service-focused organization dedicated to providing customers with the highest level of support for Electronic Manufacturing and Test Equipment. We are based in Tampa. FL. We have approximately 10,000 sq. ft. that includes a pallet rack storage system and a diagnostic laboratory. Our remote sites are located in the United States and Mexico. We offer our clients a wide range of services and replacement parts. If you have any questions please contact us via the Ebay Message Forum. 813-880-8262, or sales@islandsmt.com Sold with a 30 day money back guarantee starting from Purchase Date Returns will not be accepted unless authorized by Island ... moreSMT. To receive an RMA(Return Material Authorization) number please send a message with Ebay's message. Please include the EBAY UserID. Item number and all details of the issue you are experiencing with the item. All items should be returned in their original packing materials. Including any manuals, cables, software, etc.
|
|
|
MyData BNB Assembly L-019-624-1C
MyData BNB Assembly. Part Number L-019-624-1C. Part is Used. Tested and Functional! IslandSMT is a service-focused organization dedicated to providing customers with the highest level of support for Electronic Manufacturing and Test Equipment. We are based in Tampa. FL. We have approximately 10,000 sq. ft. that includes a pallet rack storage system and a diagnostic laboratory. Our remote sites are located in the United States and Mexico. We offer our clients a wide range of services and replacement parts. If you have any questions please contact us via the Ebay Message Forum. 813-880-8262, or sales@islandsmt.com Sold with a 30 day money back guarantee starting from Purchase Date Returns will not be accepted unless authorized by Island SMT. To receive an RMA(Return Material Authorization) number please send a message with Ebay's message. ... morePlease include the EBAY UserID. Item number and all details of the issue you are experiencing with the item. All items should be returned in their original packing materials. Including any manuals, cables, software, etc.
|
|
|
Filter Fan ZFF250/115VAC K-011-0052B
MyData Filter Fan ZFF250/115VAC. Part Number K-011-0052B. Filter Fan ZFF250/115VAC for Mydata MY9. M12, M15 and M19 Machines Part is NEW! IslandSMT is a service-focused organization dedicated to providing customers with the highest level of support for Electronic Manufacturing and Test Equipment. We are based in Tampa. FL. We have approximately 10,000 sq. ft. that includes a pallet rack storage system and a diagnostic laboratory. Our remote sites are located in the United States and Mexico. We offer our clients a wide range of services and replacement parts. If you have any questions please contact us via the Ebay Message Forum. 813-880-8262, or sales@islandsmt.com Sold with a 30 day money back guarantee starting from Purchase Date Returns will not be accepted unless authorized by Island SMT. To receive an RMA(Return Material Authorization) ... morenumber please send a message with Ebay's message. Please include the EBAY UserID. Item number and all details of the issue you are experiencing with the item. All items should be returned in their original packing materials. Including any manuals, cables, software, etc.
|
|
|
VVG2 Ed 1 Card for MyData Machine L-019-0991
MyData VVG2 Ed 1 Card. Part Number L-019-0991. Part is Used. Tested and Functional! IslandSMT is a service-focused organization dedicated to providing customers with the highest level of support for Electronic Manufacturing and Test Equipment. We are based in Tampa. FL. We have approximately 10,000 sq. ft. that includes a pallet rack storage system and a diagnostic laboratory. Our remote sites are located in the United States and Mexico. We offer our clients a wide range of services and replacement parts. If you have any questions please contact us via the Ebay Message Forum. 813-880-8262, or sales@islandsmt.com Sold with a 30 day money back guarantee starting from Purchase Date Returns will not be accepted unless authorized by Island SMT. To receive an RMA(Return Material Authorization) number please send a message with Ebay's message. ... morePlease include the EBAY UserID. Item number and all details of the issue you are experiencing with the item. All items should be returned in their original packing materials. Including any manuals, cables, software, etc.
|
|
|
MyData Vibration Control Board L-019-0039-4B
MyData Vibration Control Board for VMF30 Magazine. Part Number L-019-0039-4B. Part is Used. Tested and Functional! IslandSMT is a service-focused organization dedicated to providing customers with the highest level of support for Electronic Manufacturing and Test Equipment. We are based in Tampa. FL. We have approximately 10,000 sq. ft. that includes a pallet rack storage system and a diagnostic laboratory. Our remote sites are located in the United States and Mexico. We offer our clients a wide range of services and replacement parts. If you have any questions please contact us via the Ebay Message Forum. 813-880-8262, or sales@islandsmt.com Sold with a 30 day money back guarantee starting from Purchase Date Returns will not be accepted unless authorized by Island SMT. To receive an RMA(Return Material Authorization) number please send a ... moremessage with Ebay's message. Please include the EBAY UserID. Item number and all details of the issue you are experiencing with the item. All items should be returned in their original packing materials. Including any manuals, cables, software, etc.
|
|
|
MyData TC2 Board for TC Magazines L-019-652-2C
MyData TC2 Board for TC Magazines. Part Number L-019-652-2C. Part is Used. Tested and Functional IslandSMT is a service-focused organization dedicated to providing customers with the highest level of support for Electronic Manufacturing and Test Equipment. We are based in Tampa. FL. We have approximately 10,000 sq. ft. that includes a pallet rack storage system and a diagnostic laboratory. Our remote sites are located in the United States and Mexico. We offer our clients a wide range of services and replacement parts. If you have any questions please contact us via the Ebay Message Forum. 813-880-8262, or sales@islandsmt.com Sold with a 30 day money back guarantee starting from Purchase Date Returns will not be accepted unless authorized by Island SMT. To receive an RMA(Return Material Authorization) number please send a message with Ebay's ... moremessage. Please include the EBAY UserID. Item number and all details of the issue you are experiencing with the item. All items should be returned in their original packing materials. Including any manuals, cables, software, etc.
|
|
|
MyData Z-Fi unit without motors L-022-0066
MyData Z-Fi unit without motors. Part Number L-022-0066. MyData Z-Fi unit without motors. Used in Mydata TP and MY Series machines. Part is Used. Tested and Functional IslandSMT is a service-focused organization dedicated to providing customers with the highest level of support for Electronic Manufacturing and Test Equipment. We are based in Tampa. FL. We have approximately 10,000 sq. ft. that includes a pallet rack storage system and a diagnostic laboratory. Our remote sites are located in the United States and Mexico. We offer our clients a wide range of services and replacement parts. If you have any questions please contact us via the Ebay Message Forum. 813-880-8262, or sales@islandsmt.com Sold with a 30 day money back guarantee starting from Purchase Date Returns will not be accepted unless authorized by Island SMT. To receive an RMA(Return ... moreMaterial Authorization) number please send a message with Ebay's message. Please include the EBAY UserID. Item number and all details of the issue you are experiencing with the item. All items should be returned in their original packing materials. Including any manuals, cables, software, etc.
|
|
|
MyData NREG Edition 2B L-019-0625-2B
MyData NREG Edition 2B Board Part Number L-019-0625-2B. MyData NREG Edition 2B Assembly for TP9-4. TP11, MY9, MY12, MY15, MY19 machines Part is Used. Tested and Functional IslandSMT is a service-focused organization dedicated to providing customers with the highest level of support for Electronic Manufacturing and Test Equipment. We are based in Tampa. FL. We have approximately 10,000 sq. ft. that includes a pallet rack storage system and a diagnostic laboratory. Our remote sites are located in the United States and Mexico. We offer our clients a wide range of services and replacement parts. If you have any questions please contact us via the Ebay Message Forum. 813-880-8262, or sales@islandsmt.com Sold with a 30 day money back guarantee starting from Purchase Date Returns will not be accepted unless authorized by Island SMT. To receive an ... moreRMA(Return Material Authorization) number please send a message with Ebay's message. Please include the EBAY UserID. Item number and all details of the issue you are experiencing with the item. All items should be returned in their original packing materials. Including any manuals, cables, software, etc.
|
|
|
KURODA XT-UW-PB-1699D BOARD
KURODA XT-UW-PB-1699D BOARD- FREE SHPPING FEE. CONDITION- Seller refurbished-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
CI SYSTEM Pyrometer NTM DeLTA-R ASP Board 410-7323LF
CI SYSTEM Pyrometer NTM DeLTA ASP Board 410-7323LF- FREE SHPPING FEE. CONDITION- TAKEN FROM A WORKING EQUIPMENT-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only ag6 2.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-146ab069d30-0x10c-
|
|
|
CI SYSTEM Pyrometer NTM DeLTA-R CPU Board 410-7313LF
CI SYSTEM Pyrometer NTM DeLTA-R CPU Board 410-7313LF- FREE SHPPING FEE. CONDITION- TAKEN FROM A WORKING EQUIPMENT-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost is not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-146ab069c53-0x126-
|
|
|
INDUSTRIAL SBC Single Board SAGP 865EV-PT REV.1.1 & PXAGP-13S3-R21 free ship
INDUSTRIAL SBC Single Board SAGP 865EV-PT REV.1.1& PXAGP-13S3-R21 Shipment We will ship your order within 2 business days via post airmail. It will usually take 10-20 business days after shipment. Return Policy We carefully inspect the item before shipment. In case you found a defect on the purchase. We will exchange or refund it Contact Us We are willing to respond to your inquiry If you have a question or problem.Please contact us first. It is the fastest way to settle your concern or issue.
|
|
|
Interface Board PCI-8721 free ship
Interface Board PCI-8721 Shipment We will ship your order within 2 business days via post airmail. It will usually take 10-20 business days after shipment. Return Policy We carefully inspect the item before shipment. In case you found a defect on the purchase. We will exchange or refund it Contact Us We are willing to respond to your inquiry If you have a question or problem.Please contact us first. It is the fastest way to settle your concern or issue
|
|
|
SST Devicenet Pro PCI Adapter 5136-DNP-PCI "Not Connector" free ship
SST Devicenet Pro PCI Adapter 5136-DNP-PCI"Not Connector" Shipment We will ship your order within 2 business days via post airmail. It will usually take 10-20 business days after shipment. Return Policy We carefully inspect the item before shipment. In case you found a defect on the purchase. We will exchange or refund it Contact Us We are willing to respond to your inquiry If you have a question or problem.Please contact us first. It is the fastest way to settle your concern or issue
|
|
|
Mydata Joy Stick
Up for sale used joy stick for most of Mydata machines.
|
|
|
MyData TC2 Board for TM8, TM8C Magazines L-019-652-2C,
This TC board can used for TM8 and TM8C. Tested working good. Part warranty 30 days after the date of purchase.
|
|
|
FRITSCH FORCED CONVECTION REFLOW OVEN MISTRAL 360B NO TERMINAL READ DESCRIPTION
FRITSCH FORCED CONVECTION REFLOW OVEN MISTRAL 360B NO TERMINAL READ DESCRIPTION THIS CAME FROM NASA AND HAD A GOOD CONDITION CODE HOWEVER THE GUYS AT SURPLUS TRASHED THE MONITOR TERMINAL THINKING IT WAS A COMPUTER MONITOR WE HAVE NO TERMINAL FOR THIS AND CAN NOT TEST IT FURTHER THAN POWER UP-THE BELT& FANS RUN BUT NO HEAT WITHOUT CONTROL FROM THE TERMINAL BELT IS OK NO BROKEN SPRINGS WE OPENED IT UP AND IT APPEARS EVERYTHING IS THERE- CONTROL BOARD ETC THIS WILL PROBABLY WORK FINE IF YOU PROVIDE A TERMINAL MONITOR FOR IT. RUNS ON 220 VOLT THIS SHIPS BY FREIGHT TRUCK ONLY-NO UPS PLEASE REQUEST A TRUCK SHIPPING QUOTE FROM US BEFORE BIDDING OR MAKING OFFERS SO YOU ARE AWARE OF THE SHIPPING COST& THERE ARE NO PROBLEMS AFTER THE SALE WE SHIP BY FREIGHT REGULARLY AND GET VERY GOOD RATES-PACKING& PALLETIZING FEES ARE INCLUDED IN QUOTES ... moreLOCAL PICKUP IS OK DURING NORMAL WEEKDAY 8-5 BUSINESS HOUR BY APPOINTMENT- LOCATED APPROX 20 MINUTES FROM THE SOMERSET INTERCHANGE ON THE PA TURNPIKE CONTACT US FOR A FREIGHT QUOTE- SEND ZIP CODE My Policies: TERMS PAYMENT DUE WITHIN 8 DAYS OF AUCTION CLOSE PA RESIDENTS MUST PAY SALES TAX We take Pay-Pal payments& other forms of ebay approved& NON APPROVED payments. We do not take credit cards directly- only thru PayPal. We only ship by UPS. USPS or TRUCK& have UPS daily pickup. Payment received by Noon will usually ship(UPS or USPS) same day- otherwise next business day. Truck shipments will ship within 2-3 business days. You are buying only what is shown in the pictures unless otherwise stated in the description! Any currency or coins shown in pictures are for size reference only and are not included in the auction. UPS/ TRUCK SHIPPING INSTRUCTIONS Any above shipping instructions(like truck shipping) take precedence over these UPS instructions Buyer pays shipping costs as shown by the eBay shipping calculator Shipping will be by UPS or USPS ONLY unless truck shipping applies-Cost can be checked by entering your zip code in the eBay shipping calculator-If calculat
|
|
|
ANTISTATIC ESD MAT w/ GROUND CABLE - 24" x 36"
Used Vinyl Anti-Static Mat Size: 24” x 36” Color is white with black underside. Mat has stain. This item includes three grounding cords. The black one is 10 ft long. The green one is 15 ft long. The one in the package is 6 ft long. Used primarily as a floor mat in assembly or service areas to control ElectroStatic Discharge(ESD) when working with sensitive electronics. It is up to the buyer to be aware of what he/she is about to purchase. You as a buyer are expected to know what you are purchasing and understand that all items are sold“as is. Where is, with all faults” I make every effort to communicate all of the details to make an informed decision, to the best of my ability. See pictures for details. If you have any questions contact me. This item is sold"As-Is" with"No Warranties" and"All Sales are Final. Merchandise ... morewill be held until funds are received and clear. I will not reimburse the Buyer for items lost or damaged in the mail unless insurance is purchased. Payment: PayPal.
|
|
|
2 x Quad IVC 115 MK2 SMT Placement Machine
Quad IVC 115 MK2 SMT Placement Machines 1609 Elapsed Hours 8690 Elapsed Hours QuadVU3 fiducial recognition camera QuadVU6 dark field illuminator Quadalign Centering PCs& Monitors Manuals Nozzle Changers and all nozzles 100- 8mm tape feeders Excellent Condition Buyer Pays Shipping or Picks Up No International Sales.
|
|
|
MPM UP2040 Ultraprint Screen Printer - Solder Paste Printer
MPM Ultraprint UP2040 115V Solder Paste Screen Printer Excellent Condition Buyer Pays Shipping or Picks Up No International Sales.
|
|
|
Manncorp LY5C Reflow Oven
Manncorp LY5C 220V 41KW 5 Zone Reflow Oven Excellent Condition Buyer Pays Shipping or Picks Up No International Sales.
|
|
|
Component Lead Former / Electronic Component Bender ElectroPrep
Component Lead Forming Machine/ Electronic Component Lead Prep Equipment Up for Bid is Two Lead forming machines- both appear nearly identical but one says: Marshall Industries- Kinatechnics and the other one says ElectroPrep- Electrovert(USA Corp. One machine is in working condition the other one has an air leak BUT they both need the tubing replaced on them. These work by connecting compressed air to them. The one automatic lead former has one reel feed attachment the other does not. The lead forming machine is normally bench mounted. Components are collected in a drawer(only one machine has the drawer) Both machines include a foot pedal. The machine is designed to operate at between 50 to 80 PSI of air. Nitrogen or inert gas. The machine has a 1/4" NPT female connector into the regulator at the rear of the machine. Includes one die. ... moreMachine can be used in Auto or Manual Mode. Includes one set of instructions. Parts list and a schematic. Winning bidder will get both machines- one can be used for spare parts. These machines cost well over a thousand dollars each when new. Together they weigh about 35 pounds. Sold as is. No returns. Ships only in the USA No international bidders please.
|
|
|
SUN Microsystems PCI / PCMCIA 56K GSM/Cellular 3CCM756 Modem PC Card #C7
SUN Microsystems PCI/ PCMCIA 56K GSM/Cellular 3CCM756 Modem PC Card#C7 Description Used SUN Microsystems PCI/ PCMCIA 56K GSM/Cellular 3CCM756 Modem PC Card. Good working condition. Guarantee Non-DOA! We appreciate prompt payment and look forward to your business in the future. Payment is expected to be made within 5 days of the item being purchased(buy-it now-option) or winning your bid. Any item not paid for within 5 days. Will be re-listed and a NON-PAYING BIDDER report will be filed with eBay. Payment instruction will be sent to your email account that you have registered with eBay within minutes of placing your order. Please make sure your email address you have in your eBay profile is updated. Otherwise we will not be able to communicate. We accept the following payment method: PayPal Credit Cards via PayPal only International buyer ... morepayment must be direct wire transfer for all transaction above $500 USD We ship via FedEx. UPS and USPS Mon-Fri. No order will be shipped until full payment is made INCLUDING SHIPPING. Please allow one to five days for shipping after transaction complete. We will send you tracking number when available. We only ship to PayPal confirmed address. We don’t ship to P.O. Box or APO/FPO address. The shipping cost stated in this item is valid only for the 48 contiguous US states. All buyers from Hawaii. Alaska and US territories around the globe please contact us for shipping info and quote. All sales are final! No return is allowed unless defected are reported with the item. We don't allow return for incompatibility. Misunderstanding caused by unclear description. Buyer should read item descriptions carefully or e-mail us with any question you may have before place a bid. Buyer must notify us within 3 days if items received defective. Buyer must return all defective merchandise within 10 days of receipt of purchase. Failure to comply with this request will mean that your credit request will be denied. This may means repackaging certain items. As packaging can be damaged in shi
|
|
|
Excellon 1010 PCB Drill Motor - Rebuilt 3 month warr.
Newly rebuilt Excellon Model 1010 Drill Motor. This spindle is completely refurbished and comes with a full 90 day warranty. Quiet drill. 1 h.p. 80,000 rpm Please bid with confidence. Precision Technologies has been rebuilding spindles and servo motors for over 15 years.
|
|
|
CyberOptics SE300 Solder paste inspection machines 3D inline
Cyber Optics SE300 Solder paste inspection machines 3D inline Powered by CyberOptics SE300 3D solder paste inspection systems. Improve your quality. Increase line speed, reduce defects! 4 identical units in stock. all late 2004 or 2005. Linear motor technology. Stable reliable platform at low cost Pay with your credit card through PayPal. All in state residents within our state will be charged state and/or local sales tax at the time of checkout. Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Packages are usually shipped within 48 hours of payment receipt(excluding Saturday/Sunday) Shipping costs for all orders can be determined by the shipping calculator in this auction. All orders are shipped via UPS. FedEx, ... moreDHL, or USPS. International buyers, please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. PFI of Florida: 607 Savage ct longwood. FL 32750 Telephone: 4078224499. All items are sold as-is. We accept returns only if the item was not as described in the auction. Buyer must return the item exactly as received within 7 days and will be responsible for all additional shipping charges. We do our best to present accurate. Detailed information about every item we sell. If you have any questions, please contact us before placing your bid. PFI of Florida has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type. Condition and image of the goods at the time of sale. PFI of Florida makes no express or implied warranties or representations regarding the condition or suitability of the goods and to
|
|
|
MyData MY19 Pick and Place Agilis Hydra 2.81 SW TEX Tray feeder - large board!
MyData MY19 Pick and Place Agilis Hydra 2.81 SW TEX Tray feeder- large board! Powered by MyData MY19 full Upgraded/ refurbished 2009- upgraded to 2.8.1 software LARGE BOARD CAPABLE up to 23x20" board size! Linescan(0201 placement! Hydra Midas Inline system with conveyors TEX Tray feeder system Y wagon Thick board option Agilis linear mag ready Up to 256 8mm feeder spots available original DOM 2000 Very good condition just removed from operation. Pay with your credit card through PayPal. All in state residents within our state will be charged state and/or local sales tax at the time of checkout. Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Packages are usually shipped within 48 hours of payment receipt(excluding ... moreSaturday/Sunday) Shipping costs for all orders can be determined by the shipping calculator in this auction. All orders are shipped via UPS. FedEx, DHL, or USPS. International buyers, please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. PFI of Florida: 607 Savage ct longwood. FL 32750 Telephone: 4078224499. All items are sold as-is. We accept returns only if the item was not as described in the auction. Buyer must return the item exactly as received within 7 days and will be responsible for all additional shipping charges. We do our best to present accurate. Detailed information about every item we sell. If you have any questions, please contact us before placing your bid. PFI of Florida has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type. Condition and image of the goo
|
|
|
Kepro BTD-201. bench top developer
surplus from the University of Texas.I purchase surplus. Missing the lid. I'm including a gray piece of plastic and a stainless steel handle so you may cut your own. If you're prototyping boards you have better equipment than a table saw, which is what I have,to create one. I will send enough plastic to overlap the lip to trigger the safety switch. Aside from the lid it works properly and its been tested, priced accordingly. Thank you for viewing my auction, Shipping price quote is for the lower 48 states
|
|
|
Bio-Rad PME SIO-1 Circuit Board Working 002-1-23158-100
This Bio-Rad PME SIO-1 circuit board is used working surplus. It has several slightly bent pins highlighted in photos. The rest of the board is in good and clean condition. Part No: 002-1-23158-100 Model No: SIO-1 Condition: Used Working. 90 Day Warranty Estimated Packed Shipping Dimensions: 4-5 lbs. 16”x 16”x 6” Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister AZ5 Can't find the answer you're ... morelooking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: All items will ship from UES Arizona Facility. 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will ship from UES Arizona Facility. All items will be securely packaged or palletized and shipped via the best and mos
|
|
|
GPD Global MiniMax Dispenser Model # 22200003, UV, Loctite Bond-A -Matic 3000
Used, Brands GPD, Model MiniMax Dispenser for PCB, Quantity 1, Year 2005, Price $ 25.000.00 Location AMERICA North(USA-Canada-Mexico) Description”2005 GPD Global MiniMax Dispenser for PCB” Description: Model 22200003 with Conveyor• Loctite Bond-a-matic 3000• and Green Spot UV(may need new bulb) Date of Manufacture 2005 very low hours• Compact. Stable, high speed production and highly accurate• Many accessories. Parts, tools• Including: LX Auger Valves. Spool Dispense valve• LX Auger Cartridge Cleaning Kit• Set up and Leveling Kit and more(see pictures) May be tested and inspected. Part of a SMT line• with many components still available• Enclosed Work area: 12” x 12” Travel: Left to Right 1 Valve/Tool Capability• Accuracy: ±0.001” Needle Cleaner Auto X.Y,Z• Calibration Computer Controlled Syringe Pressure• Floware Operating Software ... more2.9.1 with 2.9.2 patch 115 Volt• 13 Amp. 50/60 HZ, 80 psi Air Pressure,
|
|
|
MPM Speedline UP3000UF Ultraflex 3000 large board screen printer 2004
Powered by Speedline MPM UP3000 UltraFlex Screen Printer. Model: UP3000UF, Ultraflex Package, 4-axis motion control, Auto-Vision, 2-D inspection, Programmable print head, 3 stage transport conveyor, Board clamping, Auto stencil load/unload, Vacuum under-wipe stencil cleaning, 2004 vintage Pay with your credit card through PayPal. All in state residents within our state will be charged state and/or local sales tax at the time of checkout. Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Packages are usually shipped within 48 hours of payment receipt(excluding Saturday/Sunday) Shipping costs for all orders can be determined by the shipping calculator in this auction. All orders are shipped via UPS. FedEx, DHL, ... moreor USPS. International buyers, please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. PFI of Florida: 607 Savage ct longwood. FL 32750 Telephone: 4078224499. All items are sold as-is. We accept returns only if the item was not as described in the auction. Buyer must return the item exactly as received within 7 days and will be responsible for all additional shipping charges. We do our best to present accurate. Detailed information about every item we sell. If you have any questions, please contact us before placing your bid. PFI of Florida has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type. Condition and image of the goods at the time of sale. PFI of Florida makes no express or implied warranties or representations regarding the condition or suitability of the goods and to the exten
|
|
|
Q-Corporation QCorp QMT1500 smt component tape and reel machine
| | | | Furniture Jewelry More Powered by Product Description Q Corporation QMT1500 Manual/ Automatic with stick feeder tape and reel system. The. QMT-1500 is sophisticated yet simple. Menus program all functions including heat and seal shoe pressure, leader and tail tape lengths, motor and acceleration speeds, as well as counting the number of parts in a run and any empty pockets. Heat and shoe pressure are independently programmable. A warning signal alerts to an empty pocket. Swing away optics make filling the empty pocket quick and easy. Because the machine smoothly accelerates to speed, small parts aren't jostled from tape. Manual unit easily upgrades to stack tube feed or vibratory bowl feeder, Accepts all surface mount tape sizes. From 8 to 56mm- tape changes take two minutes or less, No tooling changes between tape sizes, Independently ... morecontrolled heat and shoe pressure, Large 520 sq. in. work area, 23 inches of exposed pockets, Programmable leader and tail lengths, ESD Safe, Virtually maintenance free, Continuous or foot feed operation, Simple menu set-up, Program to count parts or empty pockets, Empty pocket detection alarm sounds. Machine stops, and optics swing away for easy empty pocket fill, Adjustable motor speed and acceleration. For smooth operation and no jostling of parts, Stack Tube Feed Module Adjusts to accommodate all tube sizes, Room for 8 inches of tubes, Large empty tube storage, Easy load design, Q's pick and place unit has rotational option, Specs from MFG WEBSITE: Tape Width, 8-56mm, Tape Pitch, Selectable; 4-56mm, Carrier Tape Type, Embossed Plastic, Cover Tape Type, Pressure Sensitive Adhesive or Heat Activated Adhesives Seal Pressure, Selectable, Component Carrier, SMD, Electrical, 115 VAC 60 Hz, Air, 95 PSI 1-3 CFM. Depends on options, Length, 75" Height, 24" Width, 24" Weight, 125 Lbs. Maximum Throughput, 3000-6000pph auto/ 1000-000 pph operator dependant Component Counter, Adjustable, Empty Pocket Detection Alarm on/off selectable, Tape Drive Speed, Adjusta
|
|
|
Zevatech / Juki PM-570 / Pick & Place Machine
We are selling 2 Zevatech/ Juki PM-570/ Pick& Place Machines. They are used but in good working order and would be perfect for small scale electronic builds for home or small business. They can be purchased together or separately. The listed items below will be divide up if you want to purchase a single unit. Please feel free to contact us with any questions you may have. The asking price for 1 unit is $2.500 OBO. The price for 2 units is $5,000 OBO. We can ship out the units if you pay for shipping and handling fees. 2) Teach Cameras(71) 8mm Feeders. 73) 12mm Feeders. 7) 24mm Feeders. 2) 32mm Feeders. 4) Vibratory Feeder PM 150. 8) 12mm Feeder Bank(6 position) 2) 8mm Feeder Bank(32 position) 2) 8mm to 32mm Feeder Bank(1) 8mm Feeder Bank(27 position) 1) Matrix Tray Holder. 2) Spare Feeder Advance Assembly.
|
|
|
JUKI 2020 Fine pitch pick and place system SMT 5 heads bga 0201 Very low hrs
Powered by This JUKI 2020 is a like new system. Includes 14 nozzles, removed from lab typ enviroment with less than 1000 production hours and it shows! 30 day warranty on machine. Install and training available to buyer at additional cost, or 1 day free if done at our location. The ultra-flexible KE-2020 can place a wide range of components from 0603 and ICs. To odd-form, all at a high rate of speed. 10 x 8mm 3 x 12mm 2 x 16mm feeders included in machine package. ■ 11.100CPH：chip(laser centering/effective tact) ■ 1.300CPH: IC(vision centering/effective tact) ■ One multi-nozzle laser head(4 nozzles) plus one high resolution head(1 nozzle) ■ from 0603（0201） to 74mm square components or 50×150mm. ■ Vision centering system(featuring bottom. Side, and back lighting, ball recognition and split recognition) Specifications： Board size: 330×250mm) ... morein some cases the 330mm can be increased to ~ 400+. Component size Laser recognition 0603(0201)～□20mm or 26.5×11mm. Vision recognition 1.0×0.5mm*2～□20mm or 26.5×11mm. Placement speed Chip 11.000CPH*2. IC 2.290CPH*3. Placement accuracy Laser recognition ±0.05mm. Vision recognition ±0.04mm. Feeder inputs Max. 80 on 8mm T/F*4. Actual machine video: Pay with your credit card through PayPal. All in state residents within our state will be charged state and/or local sales tax at the time of checkout. Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Packages are usually shipped within 48 hours of payment receipt(excluding Saturday/Sunday) Shipping costs for all orders can be determined by the shipping calculator in this auction. All orders are shipped via UPS. FedEx, DHL, or USPS. International buyers, please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payme
|
|
|
LOT of 8 001958-08 C MPM / Speedline 8" Metal Squeegee Blade
Lot of 8 001958-08 C MPM Speedline 8 inch metal Squeegee Blades Listed as used because they have finger prints on them. So the package was opened. M5
|
|
|
SPECTRUM TECHNOLOGIES CAPRIS 50-200 WIRE MARKER-surplus
SPECTRUM TECHNOLOGIES CAPRIS 50-200 USED AND TESTED ITEM! 15 Days Warranty! WIRE MARKER Manufactured by: Spectrum technologies, Model: CAPRIS 50-200, Serial: C50-80, Part no: JA1735, Made in: UK, Functional but needs calibration*
|
|
|
NICOLET IMAGINE SYSTEMS CX1 3600 CSCE X-RAY MACHINE 203-240VAC 25A-MAX -surplus
NICOLET IMAGINE SYSTEMS CX1 3600 CSCE USED AND TESTED ITEM! 15 Days Warranty! BT#5342 X-RAY MACHINE Manufactured by: Nicolet Imagine Systems, Supply voltage: 203-240 vac, 2 wire with ground Supply current: 25 amps max, Model no: CX1 3600 CSCE, Serial: 3684, Date of manufacture: Jan 99, Patent no: 4309308,
|
|
 |