|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States 95+ gloss. You will not be disappointed with this powder! TGIC polyester formulation, so it's great for interior or exterior use. Like all our powders, ... moreit is virgin and made in the USA! 1lb AG GREEN MIRROR HIGH GLOSS Powder Coating.
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States You will not be disappointed with the powder! 100% virgin powder and made in the USA! 1LB SILVER VEIN Powder Coating. Cure Schedule: 10mins @ 400 degrees. ... moreHigh-temp tapes, silicone plugs, powders etc.
Buy It Now
Free Shipping Condition: New Location: Lynchburg, United States This powder is transparent so the exact shade can vary based on how thick it is applied. This is a very beautiful, high gloss powder and made in the USA! ... more5 LBS CANDY BLUE TRANSPARENT Powder Coating.
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States 5 gloss level. TGIC polyester formulation approved for exterior and interior use. 100% virgin powder made in the USA! 1lb FLAT BLACK Ultra Durable Powder ... moreCoating. Cure Schedule: 10 mins @ 400 degrees.
Buy It Now
Free Shipping Condition: New Location: New Bloomfield, United States Amount: 5lb. Item: Stardust Gloss Black. ABOUT WAREHOUSE POWDER COAT. Color: Starlight Gloss Black.
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States 100% virgin powder and made in the USA! Cure Schedule: 10 mins @ 400 degrees. High-temp tapes, silicone plugs, powders- we are adding more regularly!
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States 1lb RAL 5021 WATER BLUE Powder Coating. Polyester formulation approved for interior or exterior use. Cure Schedule: 10mins @ 350 degrees. High-temp tapes, ... moresilicone plugs, powders etc. Smooth 95 gloss finish.
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States This powder is transparent so the exact shade can vary based on how thickly the powder is applied. A very beautiful, high gloss powder. 100% virgin powder. ... moreCure Schedule: 10 mins @ 400 degrees. High-temp tapes, silicone plugs, powders, etc.
Buy It Now
Free Shipping Condition: New Location: New Bloomfield, United States • Amount: 1lb. ABOUT WAREHOUSE POWDER COAT. • Item: Interpon Powder Coating. You will receive a POWDER PAINT. NOT LIQUID PAINT. • Color: Trim Silver.
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States 75+ gloss. Approved for interior or exterior use. 100% virgin powder. Cure Schedule: 10 mins @ 400 degrees. 1LB MIRROR HIGH GLOSS CLEAR Powder Coating ... morePaint Looks Wet! High-temp tapes, silicone plugs, powders- we are adding more regularly!
Buy It Now
Free Shipping Condition: New Location: New Bloomfield, United States New. Fresh. Virgin Powder Coating All of our powder coatings are made of the highest quality raw materials and satisfaction is always guaranteed! Quantity ... more= 1 lb. Cure Times Vary from 300(°f) 4 00(°f) depending on the color. All orders include detailed cure times and temperatures for each product. Listed on your packing slip and individual bag label(s) Theoretical Coverage = 61.5 Sq. Ft.lb. 1 Mil- On average you will get about 30 square foot of coverage per pound of powder. Colors may vary slightly in color and gloss from actual coating due to variance in colors of monitors- these sample colors are only a very close guide Flat Rate Shipping On All Orders United States Flat Rate Shipping = $5.00 each additional item/auction is $1.00 Flat Rate Shipping On All Orders International Flat Rate Shipping = $60.00 each additional item/auction is $2.00 Technical Information& Resources C andy& Transparent Colors require a reflective or bright base coat like powder coated chrome or silver sparkle. This applies to most projects unless you are coating over real chrome. Polished aluminum, or similar bright substrates. Dormant Colors Require a powder coating clear top coat. To bring out the final color. Dormant colors will turn silver in the oven when first cured. After you clear coat, the color will bleed back into the clear coat to give you an old school candy finish. M etallic& Pearl colors require a clear coat for extra scratch and MAR resistance. Clear coats also help make the metallic content really stand out and give the color more depth. Cure Tip: Preheat your oven to the recommended cure temperature of the specific powder coating product you are using. After you have powder coated your part and placed it in your preheated oven. Now watch for the coating to liquefy or flash over, and remember this time will vary depending on the thickness of your substrate. Once you see the entire part turn to a liquid state, then you start your timer for 20-25 minutes and this should always be a full cure. All of o
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States POWDER COATING PAINT- TRANSPARENT CANDY TEAL- 1LB) TRANSPARENT TEAL(LOW CURE) POLYESTER TGIC QUANTITY- 1LB) CURE TIME = 340F/10 MIN@ PMT(PART METAL TEMPERATURE) ... moreGLOSS LEVEL = 100% HIGH GLOSS) SPECIFIC GRAVITY = 1.2- 1.8 THEORETICAL COVERAGE = 71.5 SQ. FT/LB SALT SPRAY RESULTS = 1.000+ HRS* We offer a money back guarantee on all of our powder coating paints. No questions asked, product can be returned in the same condition as received! U.S. SHIPPING: 1/2LB- 1LB- USPS PRIORITY MAIL SMALL FLAT RATE BOX = $5.15 2LB'S- 8LB'S- USPS PRIORITY MAIL MEDIUM FLAT RATE BOX = $10.85 9LB'S- 15LB'S- USPS PRIORITY MAIL LARGE FLAT RATE BOX = $15.15(PLEASE SELECT YOUR ITEMS VIA BUY IT NOW AND WE WILL SEND YOU A COMBINED SHIPPING INVOICE) INTERNATIONAL SHIPPING: 1/2LB- 1LB- USPS PRIORITY MAIL INTERNATIONAL SMALL FLAT RATE BOX = $16.95 2LB'S- 8LB'S- USPS PRIORITY MAIL INTERNATIONAL MEDIUM FLAT RATE BOX = $47.95 9LB'S- 15LB'S- USPS PRIORITY MAIL INTERNATIONAL LARGE FLAT RATE BOX = $60.95(PLEASE SELECT YOUR ITEMS VIA BUY IT NOW AND WE WILL SEND YOU A COMBINED SHIPPING INVOICE)
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States With candy top coats the color can also vary based on thickness. Salt Spray Results: 1,000 + Hours.
Buy It Now
$225.00 Shipping Condition: New – Open box Location: Canada For UV lighting, cool effect. heavy box.
Buy It Now
$18.00 Shipping Condition: New Location: Хмельницький, Ukraine This is "Make your own set" item. Allowed to select up to 6 colors per lot.ALL COLORS IN THE LIST ARE TRIBO COMPATIBLE. Available for next GLOSS colors. ... moreAfter applied to part, allow it to fully dry out and then cure in oven with powder prescribed schedule.
Buy It Now
Free Shipping Condition: New Location: Lynchburg, United States Flat, 5 gloss level. Ultra Durable polyester acrylic formulation approved for exterior and interior use. 100% virgin powder made in the USA! 5lbs ARMY ... moreDESERT TAN Ultra Durable Powder Coating. Cure Schedule: 10 mins @ 375 degrees.
Buy It Now
Free Shipping Condition: New Location: New Bloomfield, United States POWDER COATING PAINT BLOOD RED 1LB ~ POLYESTER ~ CURE TIME = 375F/15 MIN@ PMT(PART METAL TEMPERATURE) ~ GLOSS LEVEL = 85+ ~ SPECIFIC GRAVITY = 1.3 ~ RECOMMENDED ... moreMIL THICKNESS = 1.9- 2.2 MILS ~ THEORETICAL COVERAGE = 147.92 SQ. FT.LB@ 1 MIL ~ SALT SPRAY RESULTS = 2.500+ HOURS. 100% Virgin Powder manufactured in the United States. Powered by On Jul-23-10 at 20:40:24 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States With candy top coats the color can also vary based on thickness. Salt Spray Results: 1,000 + Hours.
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States POWDER COATING PAINT COPPER VEIN 1/2 LB POLYESTER TGIC POWDER ~ CURE SCHEDULE 400F/10@ P.M.T. ~ RECOMMENDED MIL THICKNESS- 2.5-3.5 MILS ~ GLOSS LEVEL@ ... more60 DEGREE METER- 50% +/ 5% ~ SPECIFIC GRAVITY- 1.54 ~ COVERAGE BASED ON RMT- 62.73 Powered by On Jul-23-10 at 20:40:41 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
Buy It Now
Free Shipping Condition: New Location: New Bloomfield, United States • Color: Textra Satin Black. • Amount: 1lb. ABOUT WAREHOUSE POWDER COAT. • Item: Interpon Powder Coating. You will receive a POWDER PAINT. NOT LIQUID ... morePAINT.
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States 1lb of virgin flat od green powder super nice finish!
Buy It Now
Free Shipping Condition: New Location: Lynchburg, United States High 80 gloss, looks wet when cured. Ultra Durable, TGIC polyester formulation, so it's great for interior or exterior use. 100% virgin powder and made ... morein the USA! 5 lbs VIPER RED High Gloss Powder Coating.
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States With candy top coats the color can also vary based on thickness.
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States Salt Spray Results: 1,000 + Hours. Polyester TGIC. Specific Gravity: 1.2-1.8.
Buy It Now
Free Shipping Condition: New Location: New Bloomfield, United States 1 lb Black Chrome Xtreme Virgin Powder Coat Coating Paint FREE SHIPPING CUSTOMER SERVICE(800) 974-5022 FREE SHIPPING ON ALL POWDERS WITHIN THE CONTINENTAL ... moreUS No longer difficult to use. Our Black Chrome Xtreme goes on flawlessly! This new formula does not fish eye and is not temperamental to out gassing! This is one Xtreme Black Chrome! This color is one of the best kept secrets in powder coating. A clear topcoat is required when using this product. Also looks great as a base for translucent colors. Wheels. Interiors, tanks, guards- This is a must have. Features: Excellent corrosion durability. Hardness, and flexibility, Oil& Fuel Resistant Yes! We have and a vailable for this product. Columbia Coatings is your trusted source for all your powder coating needs: We offer a 100% Satisfaction Guarantee All of our powders are 100% Virgin Material and either produced exclusively for Columbia Coatings or by other manufacturing partners according to our High Quality Standards All of our powders will work with any brand of powder coating gun including hobby and industrial- guaranteed! Our Turn-Key Powder Coating Systems are made right here in the USA in our Columbia. TN facility. You can purchase with confidence, assured that your product is handcrafted by powder coating professionals. Powder coating is a combination of pigment and resin that is ground into a powder form and is sprayed on an item to be coated. Powder coated surfaces are more resistant to chipping. Scratching, fading, and wearing than other finishes. Color selection is virtually unlimited with high and low gloss, metallic, textures, and clear finishes available. By combining a base coat with a top coat. Incredible custom powder coat colors can be created. Not only are unique, personalized colors created, but the durability, impact, scratch and wear resistance of the coating is enhanced with a two coat application as well. Shipping Information: We ship orders as quickly as possible after payment has been received and approved. Some products have differe
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States Ultra Durable formulation, great for interior or exterior use. 1lb Chevy Orange Powder Coating. Cure Schedule: 10mins @ 400 degrees. High-temp tapes, ... moresilicone plugs, powders- we are adding more regularly!
Buy It Now
Free Shipping Condition: New Location: North Clarendon, United States Benefits of our premium silicone products include Heat proof up to 600°F. Will not crack, shrink, harden or break.
Buy It Now
Free Shipping Condition: New Location: Хмельницький, Ukraine Minimum order quantity is 2lb 3oz/1kg. This is Ultimate Gloss Carbon Black thermosetting powder coatings based on TGIC free polyester binder system designed ... morefor exterior applications. This paint has mirrorlike shiny surface and very good UV, weather and yellowing resistance.
Buy It Now
Free Shipping Condition: New Location: Lynchburg, United States 95+ gloss. You will not be disappointed with the results! Polyester TGIC-free formulation, great for interior or exterior use. 100% virgin powder and ... moremade in the USA! 5 lbs HIGH GLOSS WHITE Powder Coating.
Buy It Now
$150.00 Shipping Condition: New Location: China By placing your bid. You are agree to follow our store policy below: ●All purchased are final, will replace defective product only. ●Return package must ... morebe in the original packaging, everything must be in new condition.Missing part’s or anything in original contact will not qualify for any refund. ●Unless marked in the auction, all product follow our 2 months warranty policy. ●Defective item can be exchanged within 7 days of receipt.Please send us some photoes as evidence. ●Within warranty period, all exchanges due to defects are free(Buyer is responsible for shipping charges) ●Shipping and handling fees are NOT refundable in any case. ●Custom duty is responsible by buyer. ●Replacement and refunds will not be processed until the return item received. ●Customer is responsible for correct address and received of package. Customer is responsible to all shipping if return package due to customer unable to received the package. ●Please do not ask us to reduce the price and shipping and handling fee of the item after you have won the auction. ●We are not responsible for wrong or undeliverable address, customer responsible undeliverable Express package return fee and re shipping fee.A valid phone number can make the delivery process more quickly and more safely. 40W Laster Engraver Power Supply Technical Data Power range: AC 220v-240V Frequency: 60HZ/50HZ Power: 40W Temperature range in use: 10 ℃ +50 ℃ Rated output voltage: 24V DC Max current: 150uA Weight: 11kg One year warranty. Life time technical support! We accept 1.UK Bank transfer 2.PayPal www.paypal.com 3. Moneybookers www.moneybookers.com 3.the customers want use a Credit Card or Debit Card. Who can also make a payment via above two methods. 1. Import duties, taxes and charges are NOT included in the item price or shipping charges. Buyers are responsible for these charges. A, We will write a lower declared value and mark it as sample or personal gift in the shipping invoice to help customers to reduce the tax if they have not any special demands. But if it
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States Flat, 5 gloss level. Ultra Durable polyester acrylic formulation approved for exterior and interior use. 100% virgin powder made in the USA! 1lb ARMY ... moreDESERT TAN Ultra Durable Powder Coating. Cure Schedule: 10 mins @ 375 degrees.
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States 30 gloss level. Hybrid powder has excellent physical and chemical resistance properties. Like all our powders, it is 100% new virgin material. Cure Schedule: ... more10 mins @ 375 degrees. High-temp tapes, silicone plugs, powders etc.
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States The exact shade can vary based on how thickly the powder is applied. A very beautiful, high gloss powder. 90-110 Gloss! 100% virgin material. 1lb CANDY ... moreCOPPER TRANSPARENT Powder Coating. Cure Schedule: 10 mins @ 375 degrees.
Buy It Now
Free Shipping Condition: New Location: New Bloomfield, United States • Item: Diamond Vogel Industrial Powder Coating. • Amount: 1lb. ABOUT WAREHOUSE POWDER COAT. You will receive a POWDER PAINT. NOT LIQUID PAINT. • Color: ... moreBlack Satin.
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States This is a super durable high gloss yellow powder. Specific Gravity: 1.3 OEM Color Match: John Deere F9H. Salt Spray Results: 3,000 + Hours.
Buy It Now
$10.95 Shipping Condition: New Location: Eaton Rapids, United States Lightweight Powder Paint Spray Gun CS Coatings Powder Paint Spray Gun now allows you to paint all those formerly hard to dip items such as blades. Spoons, ... morespinners, bottom bouncers, or anything else metal, without the need for expensive electrostatic spraying equipment or spray booths. Spoons can be painted without“wrap-around” and Pro-Flake Glitter colors can be added with beautifully even coverage. The package comes complete with spray gun(with 4 oz. jar attached) air hose, and 4 additional interchangeable jars and lids. Since it requires very little air(5–8 psi at 1 cfm) even the smallest compressors will operate this spray gun. This is not an electrostatic spray gun. This spray gun is intended to be used with a hot item. Please see free demos on how to use this tool. SHIPPING Shipping will be $7.95 PAYMENT Payment to be received within 10 days of auction end. Response required within 3 days of auction close. FEEDBACK Feedback is important to me. As well as customer satisfaction. If you have any problems whatsoever please let me know and I will make every effort to correct the issue. Positive feedback will be left after transaction has been completed.
Buy It Now
Free Shipping Condition: New Location: Lynchburg, United States Perfect as a basecoat for any of our candy or transparent colors. TGIC polyester formulation, so it can be used in interior or exterior applications with ... morea topcoat. 100% virgin powder and made in the USA!
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States 5 0 gloss level. TGIC polyester formulation approved for exterior use. Like all our powders, it is 100% virgin. 1lb SATIN BLACK Powder Coating. Cure Schedule: ... more10 mins @ 400 degrees. High-temp tapes, silicone plugs, powders etc.
Buy It Now
$18.00 Shipping Condition: New Location: Хмельницький, Ukraine Minimum order quantity is 2lb 3oz/1kg. It has very good UV and yellowing resistance. Gloss Level up to 95 % gloss 60°, colour dependent (for GL and HR). ... moreColour A wide range of colour. One coat finishes Serviceable finish.
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States Approved for interior or exterior use, m ust be top-coated with clear. 100% virgin powder. Cure Schedule: 12 mins @ 350 degrees. High-temp tapes, silicone ... moreplugs, powders- we are adding more regularly!
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States 1 lb of Tight Silver Vein Powder Coating. This is a Epoxy formula and has a bake schedule of 400 degrees for 7 minutes. This has a great chemical resistance. ... moreTypical Film Thickness 1.6 to 3 mils. Average coverage 10- 20 Sq. Ft per 1/2 lb. Remember. Because of differences in computer monitors and other variables, colors may not match exactly. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States This is a perfect match for "Harley Denim Black". Salt Spray Results: 1,000 + Hours. 25-50 Lb boxes are also available.
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States LIKE OUR FACEBOOK PAGE AND RECEIVE A 10% DISCOUNT COUPON TO USE ON OUR WEBSITE! POWDER COATING PAINT- KAWASAKI GREEN- 1LB) KAWASAKI GREEN(LOW CURE) POLYESTER ... moreTGIC. QUANTITY =(1LB) CURE TIME = 340F/10 MIN@ PMT(PART METAL TEMPERATURE) GLOSS LEVEL = 90-100% HIGH GLOSS) SPECIFIC GRAVITY = 1.2- 1.8 THEORETICAL COVERAGE = 51.5 SQ. FT/LB SALT SPRAY RESULTS = 1.000+ HRS* We offer a money back guarantee on all of our powder coating paints. No questions asked, product can be returned in the same condition as received! We are here to help you(727)321.7233 If you need time to pay. E-mail us to let us know, and we will give you extra time, otherwise your item goes into the unpaid item request from E-bay! We combine shipping on all orders. If shipping isn't automatically combining your items, just select your items via BUY IT NOW, and we will send you a combined shipping invoice, we combine shipping on all of our items! You may be interested in on eBay. Our Policies: We only charge sales tax on any orders purchased in the state of Florida! We combine shipping on all orders. If shipping isn't automatically being calculated for you, just select your products via BUY IT NOW, and we will send you an invoice with combined shipping! Another Auction From Powered by U.S. SHIPPING: 1/2LB- 1LB- USPS PRIORITY MAIL SMALL FLAT RATE BOX = $5.15 2LB'S- 8LB'S- USPS PRIORITY MAIL MEDIUM FLAT RATE BOX = $10.85 9LB'S- 15LB'S- USPS PRIORITY MAIL LARGE FLAT RATE BOX = $15.15(PLEASE SELECT YOUR ITEMS VIA BUY IT NOW AND WE WILL SEND YOU A COMBINED SHIPPING INVOICE) INTERNATIONAL SHIPPING: 1/2LB- 1LB- USPS PRIORITY MAIL INTERNATIONAL SMALL FLAT RATE BOX = $16.95 2LB'S- 8LB'S- USPS PRIORITY MAIL INTERNATIONAL MEDIUM FLAT RATE BOX = $47.95 9LB'S- 15LB'S- USPS PRIORITY MAIL INTERNATIONAL LARGE FLAT RATE BOX = $60.95(PLEASE SELECT YOUR ITEMS VIA BUY IT NOW AND WE WILL SEND YOU A COMBINED SHIPPING INVOICE)
Buy It Now
$15.45 Shipping Condition: New Location: Blanchard, United States This process has a strong but attractive finish. @ 375°degree •Gloss Level: 70 - 80 % Gloss •Storage:
Buy It Now
Free Shipping Condition: New Location: New Bloomfield, United States • Amount: 1lb. ABOUT WAREHOUSE POWDER COAT. • Item: PPG Powder Coating. You will receive a POWDER PAINT. NOT LIQUID PAINT. • Color: Snap On Red.
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States New. Fresh. Virgin Powder Coating All of our powder coatings are made of the highest quality raw materials and satisfaction is always guaranteed! Quantity ... more= 1 lb. Cure Times Vary from 300(°f) 4 00(°f) depending on the color. All orders include detailed cure times and temperatures for each product. Listed on your packing slip and individual bag label(s) Theoretical Coverage = 61.5 Sq. Ft.lb. 1 Mil- On average you will get about 30 square foot of coverage per pound of powder. Colors may vary slightly in color and gloss from actual coating due to variance in colors of monitors- these sample colors are only a very close guide Flat Rate Shipping On All Orders United States Flat Rate Shipping = $5.00 each additional item/auction is $1.00 Technical Information& Resources C andy& Transparent Colors require a reflective or bright base coat like powder coated chrome or silver sparkle. This applies to most projects unless you are coating over real chrome. Polished aluminum, or similar bright substrates. Dormant Colors Require a powder coating clear top coat. To bring out the final color. Dormant colors will turn silver in the oven when first cured. After you clear coat, the color will bleed back into the clear coat to give you an old school candy finish. M etallic& Pearl colors require a clear coat for extra scratch and MAR resistance. Clear coats also help make the metallic content really stand out and give the color more depth. Cure Tip: Preheat your oven to the recommended cure temperature of the specific powder coating product you are using. After you have powder coated your part and placed it in your preheated oven. Now watch for the coating to liquefy or flash over, and remember this time will vary depending on the thickness of your substrate. Once you see the entire part turn to a liquid state, then you start your timer for 20-25 minutes and this should always be a full cure. All of our products cure times and temperatures listed on our website, packing slips, TDS sheets, and product labels are
Buy It Now
Free Shipping Condition: New Location: Weatherford, United States This color REQUIRES a clear top coat if you are not using a candy or transparent top coat. Pencil Hardness: 2H. Polyester TGIC. Specific Gravity: 1.30.
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States Polyester formulation approved for interior or exterior use. VIVID BLUE GLOSS Powder Coating. Cure Schedule: 10mins @ 400 degrees. Smooth 85 gloss finish. ... more100% virgin powder and made in the USA! High-temp tapes, silicone plugs, powders etc.
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States With candy top coats the color can also vary based on thickness.
Buy It Now
$8.82 Shipping Condition: New Location: Nolensville, United States Do Not Use Zinc Or Iron Phosphate On Substrate Before Applying High Temp Powders. High Temp Flat Black. (600f-1200 F) - Specialty Silicone Based Powder ... moreCoating For High Temperature Applications. Salt Spray Results = 1,000+ Hours.
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States BLACK SUPER DURABLE 60% GLOSS ~ POLYESTER TGIC SUPER DURABLE ~ EXCELLENT EXTERIOR DURABILITY AND CORROSION RESISTANCE ~ DESIGNED TO MEET THE STRINGENT ... moreREQUIREMENTS OF AUTOMOTIVE AND ARCHITECTURAL PERFORMANCE STANDARDS. CURE SCHEDULE = 400F/10 MIN@ PART METAL TEMPERATURE• GLOSS LEVEL = 60% ON 60 DEGREE METER• RECOMMENDED MIL THICKNESS = 2.0- 3.0 MILS• SPECIFIC GRAVITY = 1.34• THEORETICAL COVERAGE = 59.2 SQ. FT. SALT SPRAY RESULTS = 3.000+ HOURS• HUMIDITY RESISTANCE = 1.000+ HOURS. Contact us for price breaks on larger quantities and for personalized priced quotes on international orders. Powered by On Jul-23-10 at 20:36:09 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
Buy It Now
$9.00 Shipping Condition: New Location: Weatherford, United States 100% Brand New. Virgin Flat Black by Cardinal Industrial Finishes. This is an extremely durable, super smooth flat black polyurethane powder. Orders of ... more5 pounds or more will receive a FREE 2 x 3.5" panel of this color to show customers or for your own color reference! No more guessing. We tell you exactly who makes the powder we sell unlike some other re-sellers who change the names and won't tell you who makes it! We buy in bulk and pass the savings on to you. Order only what you need! Polyurethane Cure Schedule: 10 Minutes at 400 Degrees(Part Metal Temperature) Gloss Level: 0% Specific Gravity: 1.53 Theroretical Coverage: 63.14/sq ft per pound@ 2 MIL Salt Spray Results: 1.000 + Hours Adhesion: 4B Pencil Hardness: 2H Shipping Costs: 1 Pound: USPS Priority Flat Rate Box: $5.70 2 Pounds: USPS Priority Flat Rate Box: $8.70 2-8 Pounds: USPS Priority Flat Rate Box: $12.50 9-15 Pounds: USPS Priority Flat Rate Box: $15.45 25-50 Lb boxes are also available. Please contact us for pricing details! These images are of our own customer parts we have coated in this exact powder. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Model: PC03-2 Color:Red Power voltage: 110 V, 60 Hz Output pressure: 25 N/S Power: 3.3 W Voltage output(adjustable): 15 KV, 30KV （2 kinds ... moreto choose） Power Cord: 16AWG Air Inlet: 1/4 inch NPT Thread Require air supply: 10-15 PSI, Dry air 5CFM AMPS: 0.03 A Pressure ratio: 6 / 8 product size:21*21.3*7.6cm Product weight: 3.2kg Package size: 41.5 x 28 x 22.5 cm(16.34 x 11.02 x 8.86 inch) Weight: 4 kg (9 lbs).
Buy It Now
$8.82 Shipping Condition: New Location: Nolensville, United States RED-ORANGE NEON ~ ONE COAT PROCESS ~ POLYESTER ~ WEATHER RESISTANT POWDER COATING FOR INTERIOR OR EXTERIOR APPLICATIONS. CURE SCHEDULE = 392F/12-15 MIN@ ... morePART METAL TEMPERATURE. GLOSS LEVEL = 80-90% ON 60 DEGREE METER, RECOMMENDED MIL THICKNESS = 2.5- 3.5 MILS, SPECIFIC GRAVITY = 1.6, THEORETICAL COVERAGE = 40.1 SQ. FT. SALT SPRAY RESULTS = 1.000+ HOURS Contact us for price breaks on larger quantities and personalized shipping quotes for international orders. 100% Virgin Powder manufactured in the United States. Powered by On Jul-23-10 at 20:36:59 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-146d7c2a932-0x111-
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States 1lb PLATINUM GRAY RAL 7036 High Gloss Powder Coating. 95 gloss level, super clean appearing gray powder. Polyester formulation approved for outdoor use. ... moreLike all our powders, it is 100% virgin. Cure Schedule: 10 mins @ 350 degrees.
Buy It Now
$9.00 Shipping Condition: New Location: Lynchburg, United States 2 0 gloss level puts it between our Flat Black and Satin Black. TGIC polyester formulation approved for exterior use. Like all our powders, it is 100% ... morevirgin. 1lb MATTE BLACK Powder Coating. Cure Schedule: 20 mins @ 375 degrees.
Buy It Now
Free Shipping Condition: Used Location: Phoenixville, United States Please look at photos for condition Comes with what you see did work when used last Please contact me with any questions you may have, thanks.
Buy It Now
Free Shipping Condition: New Location: New Bloomfield, United States • Item: Sherwin Williams Powder Coating. • Amount: 5lb. ABOUT WAREHOUSE POWDER COAT. You will receive a POWDER PAINT. NOT LIQUID PAINT. • Color: Mirror ... moreGloss Black.
Buy It Now
Free Shipping Condition: New Location: Lynchburg, United States 60 gloss level, puts it between Satin Black and Mirror Gloss Black. TGIC polyester ULTRA DURABLE formulation, so it's great for exterior use. Like all ... moreour powders, it is 100% virgin. 5lbs CHASSIS BLACK Ultra Durable Powder Coating.
Buy It Now
$18.00 Shipping Condition: New Location: Хмельницький, Ukraine Minimum order quantity is 2lb 3oz/1kg. One coat finishes Serviceable finish. This is a Virgin Qualicoat Approved Super Durable ABSOLUTE BLACK thermosetting ... morepowder coatings based on advanced urethane binder system designed for exterior applications.
|
|
|
|
Nordson powder Versa Spray II Auto Controller Gema Wagner
Reconditioned Nordson Versa Spray II Auto Controller. All electronics and pneumatics set to factory specifications. One year warranty included with cost of unit. Money back guarantee. see us on the web at
|
|
|
Nordson powder Versa Spray 1 Auto Controller, Gema Wagner
Reconditioned Nordson Versa Spray 1 Auto Controller. All electronics and pneumatics set to factory specifications. One year warranty included with cost of unit. Money back guarantee. See us on the web at
|
|
|
Nordson Powder Versa Spray Cable Fed Gun & Cable, Gema, Wagner
Reconditioned Nordson Versa Spray Cable Fed Gun& Cable. Gun has new resistors in it. Also cable has been tested for any shorts. One year warranty included in price. Money back guarantee. See us on the web at www.powderboothparts.com f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f8760acbd-0xfd-
|
|
|
Nordson Powder Smart Spray System, Master Controller, Gema, Wagner
Reconditioned Nordson Smart Spray System Master Controller complete with photo eyes. Includes 4 photo eyes and operators manual. Also has 10 power cords for gun controllers. One year warranty included in price. Money back guarantee. See us on the web at www.powderboothparts.com
|
|
|
Nordson Powder EXP/100+ Controller, Gema, Wagner
Reconditioned Nordson EXP/100+ Controller. All electronics and pneumatics set to factory specifications. This unit is for the Versa Spray Cable Fed Auto Guns. EXP& 100+ operate the same and use same guns. One year warranty included in price. Money back guarantee. See us on the web at www.powderboothparts.com
|
|
|
Craftsman Powder Coating System Model 17288 *NO RESERVE*
Welcome to Wayne Exchange NO RESERVE AUCTION Featuring a Craftsman Powder Coating System Model 17288 Apply a durable. Protective coating to any metal component quickly, easily and safely. Coating is electrostatically applied, then just place coated item in a 400 deg. oven to cure and you're done. Fast and environmentally friendly, coating is chip and chemical resistant. System features internal air generation(no compressor needed. Variable speed switch. Powder-coating can be applied to iron. Steel, aluminum, stainless steel, titanium, and also chrome-plated surfaces. The Craftsman Powder Coat system will allow you to obtain professional results at home at a fraction of the cost. Superior to aerosol and other liquid coatings in flexibility. Corrosion, and chemical resistance. Over spray is simply swept up and disposed of in household refuse. ... moreThe system includes the accessories, application gun, and detailed instructions. Powder-coating, like other high-quality coatings, can only be applied over a bare metal surface. Removing corrosion and old coatings can be easily accomplished with abrasive paper, wire brush, liquid paint stripper, or abrasive blasting. Once removed simply wipe with acetone or paint thinner, allow to dry, and coat. The only components you will need are an object to coat and an extra toaster oven or non food prep conventional oven. Features: Professionally powder coat any metal object that can withstand a 400 degree cure. Repair and refinish items like: Automotive Components. Outdoor Fixtures, Marine Equip and much more. Includes: Powder Coating gun and matching polystyrene carry case. Appears to have been very little if at all! Comes just as shown. Please see pictures. Bid it to win it! Check out my other items! Payment We will gladly accept Paypal. If you have any questions regarding this listing or payment information. Please feel free to email through Ebay or call us at 734-722-2828 We are Open Monday-Friday 10AM. to 6PM. EST. Except Tuesday 10AM. to 3PM. Shipping Continental US shippi
|
|
|
Orange Spectracoat Manual Powder Coating Gun II
Used Spectracoat Manual Gun II Made to use with Spectracoat powder coating systems. This can be used with a Wagner system by purchasing our Powered by On Jul-23-10 at 20:36:37 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
Powder coating equipment Nordson Versa Spray 2 gun and control unit
Nordson Versa Spray 2 powder gun and control unit excellent condition 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f987810c0-0xfd-
|
|
|
Case of 12 Krylon Industrial K08300 Highway White Line-Up Striping Paint Cans
Case of 12 Krylon Industrial K08300 Highway White Line-Up Striping Paint Cans-Model No. K08300-Color: Highway White-UPC: 075577083008-Size: 18 oz(1 lb 2 oz) 510 g QUESTIONS Please ask all questions 48 hour before the end of sale. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 201-497-6767 SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is removed it was sold locally. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. You are buying used equipment at used prices. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time frame and will result ... morein a Non-Pay Bidder alert filed with eBay to cover the closing fees of the auction. SHIPPING& HANDLING; Local pickup is available; Loading and shipping are the buyer’s responsibility. Buyer is responsible for all shipping costs. urtoolshop.com can transport up to 100 miles round trip for $2.00 per mile toll additional. We can crate the item/s if needed for a fee of $120. Please allow 3-5 business days after payment is received for the order to be processed then shipped. Send us your zip code and ship to address is it commercial with or without loading dock or residential. All quotes will be for street delivery. Due to the cost of fuel. Please ask for a freight quote. We do not mark up freight; we will add a handling cost to the quote. NJ Sales tax; Items delivered within the State of New Jersey are subject to a 7% sales tax. All shipments will ship to the confirmed address in the buyer's PayPal account. RETURN POLICY; Returns will not be accepted if the equipment is not in the same condition as when it was shipped to the buyer. Photo and condition of equipment will be noted on the bill of lading. Buyer is responsible for return shipping. DISCLAIMER; Placing a bid on our
|
|
|
Eastwood Hot Coat Powder Coating System - Used Once - NR
You are bidding on an Eastwood Hot Coat Powder Coating System Used once- Need a bigger machine(this is more for home use and smaller jobs) We are a powder coating company so the item was well taken care of and looks NEW. Package Contains: Hot Coat Gun 1 Bottle Moisture Filter Power Supply. If you have any questions. Please ask before bidding! GOOD LUCK!
|
|
|
Double Graco Glutton 4:1 Stainless Steel Pump Mixing Station Liquid Coating Syst
Double Graco Glutton 4:1 Stainless Steel Pump Mixing Station Liquid Coating System GRACO 4:1 Ratio. Glutton Circulation Package 96A637& 96A638 400 Series Glutton Pumps You are bidding on a GRACO 4:1 Ratio. Glutton Circulation Package 96A637& 96A638 400 Series Glutton Pumps. This item came from a change over at a large Furniture Manufacturer and was in full operation last week. The Manufacturer drained and cleaned it with solvent. We have 3 of these double assemblies. And the high bidder can take all(3) sets at the high bid price each. The pumps are marked 220-666 and 237-011. ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM ZOOM Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M ZOOM ZOOM ZOOM ClicPic According to our research there is a left and right unit 96A637 and ... more96A638. Each unit contains 2 each of the following: 2 each 400 Series Glutton Stainless Steel Pumps 220666 and 237011 2 each 238983 Surge Tank 2 each 238414 Back Geared Air Powered Agitator With Siphon Package And Lift 2 each of all of the valves. Filters, fittings and other components of a complete assembly Below are links and information from the internet: http:www.graco.com/content/dam/graco/tech_documents/manuals/310/310564/310564EN-D.pdf FLOOR STAND 4:1 Ratio. Glutton_ Circulation Packages 96A637& 96A638 307107 Fluid Regulator 307628 Fluid Ball Valves 307707 Surge Tanks 308169 Lubricators 308201 Runaway Valves 307843 Glutton Pumps http:stores.jgsmith.net/store/content/FINISHING%20PRODUCTS.pdf 237-011/220-666 400 Series Stainless Steel Pumps Model 220666. Series D Model 237011. Series A http:www.graco.com/content/dam/graco/tech_documents/manuals/307/307843/307843EN-ZAE.pdf Technical Data. 400 Series Pumps Maximum working pressure. 400 psi(2.8 MPa. 28 bar) Maximum air input pressure. 100 psi(0.7 MPa. 7 bar) Air operating range. 25 to 100 psi(0.07 to 0.7 MPa. 1.73 to 7 bar) M
|
|
|
GRACO Heavy-Duty Back-Geared Agitator / Mixer with Elevator and Drum Cover
GRACO Heavy-Duty Back-Geared Agitator with Elevator and Drum Cover You are bidding on a GRACO Heavy-Duty Back-Geared Agitator with Elevator and Drum Cover. This item came from a change over at a large Furniture Manufacturer and was in full operation last week. The Manufacturer drained and cleaned it with solvent. We have 6 of these. The 2 stainless tubes with hose are included as well as the white drum caps; see first picture. We have matching Graco Glutton Pumps available. ZOOM ZOOM ZOOM ZOOM Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M Z O O M ZOOM ZOOM ClicPic 231413 | FINISHING EQUIPMENT | GRACO | AGITATORS | J. Gregory Smith& Son. Inc $2.979.17 LINK http:wwwd.graco.com/Distributors/DLibrary.nsf/Files/308609/$file/308609P.pdf DRUM AGITATOR LINK 238413 Back Geared Air Powered Agitator Elevator Lift http:stores.jgsmith.net/store/content/FINISHING%20PRODUCTS.pdf ... moreGRACO LINK Return Policy: Within 14 days after receiving this item and if you believe that we misrepresented it. Please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You SHIPPING: USA This item has a combined shipping weight of about 100 pounds and will be shipped common carrier class# 85(42x48x36) Check with us for shipping rates or contact your freight carrier. There is no charge for pick up at our Northwest Detroit Suburb location. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. Make an appointment. Robert at spectorequipment.com 248-752-5084 We accept most forms of payment including: Credit Cards. Pay-Pal, personal, company and cashier’s checks, pay on pick up. All funds must clear our bank before delivery. TERMS 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2.
|
|
|
Insa Manual Powder Coating System, Model 5200, Nordson Powder Coating
Insa Manual Powder Coating System. Model 5200. Voltage: 115V/230V.
|
|
|
PlastiDip One Gallon Liquid Dip Monster Blaze Green
PlastiDip 1 Rubber Dip Gallon Bucket(80% full) Color: Monster/Blaze Green Includes: 3 disposable Preval Sprayers w/ 1 small jar(more sprayers can be bought at Home Depot or Ace Hardware) I used 20% of it on my car which I ended up removing and painting it permanent green. You can use this stuff on pretty much anything for pretty much anything especially if its only temporary. If you put enough layers. Taking it off is easy! Also, now that they have more colors, PlastiDip is known all over especially on car parts! Plasti Dip is a multi-purpose. Air dry, specialty rubber coating. It can be easily applied by dipping, brushing, or spraying. Plasti Dip protective coating is ideal for a broad array of do-it-yourself projects around the home, garage, garden, and elsewhere. It protects coated items against moisture, acids, abrasion, corrosion, and ... moreskidding/slipping, and provides a comfortable, controlled grip. Plasti Dip remains flexible and stretchy over time, and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from-30°F to 200°F. Using Plasti Dip Spray in cooler temperatures may affect drying times. Finish quality, and spray performance. If you plan on spraying your project in cooler conditions, we recommend pre-warming the aerosol can by placing it in a warm room and allowing the contents to reach room temperature. Under no circumstances should users subject the aerosol can to temperatures above 120°F or use heat from an open flame or other sources of ignition to pre-warm the spray can. Additionally, cooler conditions may affect the surface you are spraying. If you are concerned about spraying your project in cooler temperatures, test in an inconspicuous area first to ensure the resulting finish will be what you’re looking for. Any questions? Feel free to message or email me: extremeflip86@hotmail.com
|
|
|
Nordson Surecoat Manual Powder Coating System w/ Cart Model DSYS
SKU: 2359799 A: 0013000000CXCfg O: 0065000000MjeAZ PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Nordson Surecoat Manual Powder Coating System w/ Cart Model DSYS This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Nordson Model: DSYS-SBSSNX04C1/HA Type: Powder System Serial Number: AA98A21675 Transport Weight: approx. 131 lbs Transport Dimensions: 42" L) x 48" W) x 49" H) Features/ Specifications: ... moreAll Hoses Included Portable- Includes Cart Manual Gun Control Unit Also includes Pneumatic Air Hose Dimensions& Weight: Dimensions: 25" L) x 30" W) x 44" H) Actual Weight: 86 lbs Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment Gun is missing hook- prevents it from staying in holder AUX knob& Dial missing- See photo# 5 Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, fea
|
|
|
Nordson Tribomatic Manual Powder Coating 500 Gun System w/Cart Powder Coat
SKU: 2359800 A: 0013000000CXCfg O: 0065000000Mjdzx PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Nordson Tribomatic Manual Powder Coating Gun System w/ Cart Tribomatic 500 Gun This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Nordson Model: Tribomatic Type: Powder System Serial Number: AA95D20978 Transport Weight: approx. 127 lbs Transport Dimensions: 42" L) x 48" W) x 49" H) Features/ ... moreSpecifications: All Hoses Included Portable- Includes Cart Manual Gun Control Unit The Tribomatic 500 spray gun includes an adjustable conical nozzle for fast. Easy spray-pattern control, from a large, soft pattern to a narrow penetration pattern. Tribomatic 500 Gun is designed for use with current Tribomatic II gun controls for cost-effective conversion from Tribomatic II powder coating systems. Dimensions& Weight: Dimensions: 28" L) x 24" W) x 44" H) Actual Weight: 82 lbs Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when availabl
|
|
|
Nordson Versa Spray 2 powder coating manual gun unit with 80 lbs hopper and gun
Nordson versa spray 2 manual gun unit and 80 lbs hopper with Versa Spray 2 gun including fan spray tip. Power cable, and complete feed pump
|
|
|
Standard flow complete powder feed pumps
Powder coating feed pumps in great condition 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13fd2fd1603-0x106-
|
|
|
Sure Coat Manual Gun unit for powder coating
Sure Coat manual gun control unit with power cable in great condition
|
|
|
Powder Coating Gun Wagglers - Gema - Nordson - Wagner
You are bidding on two powder gun movers that appear to be in good shape and used in a conditioned room. These both have a variable speed controller mounted on them and held four powder guns each. Rolling bases for part distance adjustment. Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end. We reserve the right to end this auction early due to item being listed elsewhere.
|
|
|
Titan Side Striper Paint Parking Lot Lines EASY
Titan Side Striper Paint Parking Lot Lines EASY, USED ONCE.
|
|
|
Powder Coating Batch Paint Booth
nearly new condition. Used in research lab setting only. This Norson Powder Booth was a top of the line with all ventilation equipment and filters included. The booth originally sold for $10-$20,000. This booth was used sparingly in a research lab setting on the east coast. We purchased the company and all the equipment but have no need for the booth. We are asking $12,000 OBO for the entire booth. The booth is model number 188174A01 and serial number 4005129. Please go to the Nordson web site for more complete information on the booth.
|
|
|
Duracoat Dura Coat Lauer Camo Paint System Epoxy Firearm Finish plus hardener
DuraCoat Paint.the best two part firearm or archery or anything.paint. Two colors for a camo finish. Lefet over from painting my bow. Wilderness Mirage Tan and Woodland Green plus Hardener and syringe to measure. Enough to easily do one rifle or shotgun. Or perhaps two handguns. Use with airbrush. Woodland Green about 3/5 full Wilderness Mirage Tan about 2/5 full
|
|
|
CP835 Epoxy Re-surfacer Coating, two gallon kit
ConcretePlus CP835 Re-surfacer. Item Description: CP835 re-surfacer coating is a zero-VOC. Professional grade, two component, medium-high viscosity epoxy with good chemical resistance. This item sells for $106.50 per two gallon kit, 1 gallon of the Part A and 1 gallon of the Part B are included in the two gallon kit. The two gallon kit is suitable to cover 40 sq ft at 40 mils thickness. Typical uses: Patching concrete pits. Small holes or pockmarks Stationary cracks and joints Feathering lapped steel plate joints Filling voids and cinder-block re-surfacing Repaired surfaces may be immediately topcoated Secondary containment. Troughs and pipelines For the technical data sheets and MSDS's give us a call at 918-615-0123. Ships via UPS ground.
|
|
|
EASTWOOD HOTCOAT GUN COAT COATING GUN, CUP, POWER UNIT W/LEADS & FILTER, MANUAL
EASTWOOD HOTCOAT GUN COAT COATING GUN. HOTCOAT CUP, POWER UNIT WITH LEADS, IN-LINE FILTER. DG-10 ON HANDLE OF GUN. COMES WITH ORIGINAL MANUAL. PURCHASED FROM EASTWOOD COMPANY.HAVE RECEIPTS EASTWOOD ITEM# 10198. EVERYTHING LOOKS GOOD. THERE IS NO RUST OR CORROSION. MECHANICS WORK WELL. KEPT IN ORIGINAL BOX. LOOKS TOO SCARY FOR ME TO PLUG IN. I WILL LEAVE THAT TO THE EXPERTS. LOOKS LIKE IT MIGHT WORK. BUT NO GUARANTEES. THIS ITEM IS BEING SOLD ON AS-IS BASIS. IT HAS NOT BEEN TESTED. PLEASE SEE PICTURES AND EMAIL WITH ANY OTHER QUESTIONS. HAVE OTHER RELATED ITEMS. WILL COMBINE SHIPPING WHERE POSSIBLE. PAYMENT MUST BE MADE WITHIN 3 DAYS FROM AUCTION END. WILL MAIL ANYWHERE IN CONTINENTAL US FOR $11.95. INSURANCE& PRIORITY EXTRA. EMAIL WITH RATES ON FOREIGN SHIPPING. PAYPAL ONLY. THANK YOU.
|
|
|
MIGHTY LUBE lubrication system for Overhead Conveyor
Up for sale is an automatic lubrication system from"Mighty Lube" This has the lubrication tubes that are already packaged onto a piece of Unibilt track. The lubrication tubes can be removed and put onto another piece of track such as 3" or 4" I Beam or another type of enclosed conveyor. We have other types of equipment available upon request. Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end. We reserve the right to end this auction early due to item being listed elsewhere.
|
|
|
Conveyor Swivel Hook,X348,X458,Unibilt,Richard Wilcox,RW,Overhead Conveyor
Up for sale is an indexing conveyor swivel. This can be used with virtually any type of conveyor chain. It will rotate with the advanced movement of an automatic conveyor system or just rotate manually and was removed from a working system. Since these are being sold individually. And we are not sure how many will be on each order, the shipping must be calculated at the time of purchase. Buyer is responsible for shipping! We have other equipment available upon request. Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end. We reserve the right to end this auction early due to item being listed elsewhere.
|
|
|
Control Panel - Batch Oven - Powder Coating - Nordson - Gema
You are bidding on a control panel that was removed from a working oven. We have other equipment available upon request. Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end. We reserve the right to end this auction early due to item being listed elsewhere.
|
|
|
Powder Coating Oven/ Spray Booth/ Guns & Assorted Powders
I am selling all my equipment. this includes but is not limited to a 52" x 53"x 86" oven. A UL rated 2 tier portable IR curing system( for larger jobs) and a 72"x 56"x 86" spray booth with filters and roof mounted UL wired ventilation pump. I also have 2 spray gun units and an array of hangers and assorted colored powders. I will sell the complete turn key business or part it out individually. The oven you are bidding on is considered"used" but has only been used a handful of times. it was built in jigs and fully welded together. The oven features 3-3/4 inch thick walls. Top and bottoms, and 2-1/2 inch thick doors. They are made completely of galvanized materials and are insulated with fiberglass insulations rated up to 800 degrees. The door seal consists of fiberglass tad pole seal. The door has welded ... morehinges and 2 quick release latches. The unit is mounted on 4 swivel castors which allows for easy maneuverability. The oven has a digital pid temperature controller that is wired into a contact relay. The heaters run off 220v single phase current and the controller and contact block use 120v to operate. All parts are UL listed and approved and all wiring is ran on the outside of the unit and heaters are wired individually As with all equipment used for heating applications. Electrical components will degrade over time and may require maintenance. THIS ITEM IS BEING SOLD"AS IS" and no warranty is inferred or implied. Buyer responsible for all shipping costs!
|
|
|
Aluminum hi Temp 1200 F Paint exhaust Stoves engines
Auction for 1 each aerosol can. Winning Bid receives 1 can of Aersol. Hi-Temp Aluminum Silicone enamel for Hi Temperature applications such as smokers. Exhaust manifolds, mufflers, stoves and engines. Good up to 1200F. Available in aerosol, 1's, 5's and drums. Excellent UV resistance for exterior conditions. MasterTouch 1200 ° Aluminum Silicone Enamel 9814 Series PRODUCT DESCRIPTION A fast drying. Aluminum, modified silicone enamel designed for high temperature applications that require a coating to withstand continuous temperatures of 1000 ° F and surges up to 1200 ° F with no loss of adhesion. RECOMMENDED USES Applications include O.E.M. heat exchangers. Stack, incinerators, furnace exteriors, hot piping, mufflers, exhausts and other elevated temperature metal surfaces. Excellent for cookers. Smokers and gas grills ... morebecause of its excellent gloss and color retention. PRODUCT BENEFITS· Excellent Resistance to U.V. Exposure· Meets Proposed VOC Regulations· Withstands Temperatures Up to 1200 ° F· Can be Used As a Primer& Finish· Will Air Dry or Can be Force Cured or Baked· Excellent Flexibility for Thermal Shock· Fast Drying/Increased Production Time· Excellent Gloss& Color Retention& C halk Resistance· Excellent Adhesion COLORS 9814 Aluminum SURFACE PREPARATION Surface must be clean and dry. All substrates must be cleaned free of dust. Dirt, oil(including form oils& parting compounds) grease, soap residue, wax and flaking paint. Scuff sand slick, hard, glossy surfaces to promote adhesion. Sandblast or wire-brush rusty surfaces. Solvent wipe and/or detergent clean surface with 12 Paint Prep(Water-based Solvent Degreaser) according to SSPC-SP1. For optimum adhesion and corrosion resistance. Rusted metal should be either sandblasted SSPC-10 and obtain a 1 to 1.5 mil(25-40 micron) blast profile. No primer is required but can be applied over 8314 Black Primer or inorganic zinc rich primer for increased performance. Refer to Surface
|
|
|
NORDSON Prodigy Powder Coating Gun
This NORDSON PRODIGY MANUAL GUN is in excellent shape and appears to have been kept in a conditioned room. Custom built cart for portability! Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end. We reserve the right to end this auction early due to item being listed elsewhere. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-1400c8ac3a5-0xfb-
|
|
|
KAESER Regenerative Desiccant Air Dryer - Model # KLDW 25 - Powder Coating
You are bidding on a KAESER Regenerative Desiccant Air Dryer. The unit was removed from a working powder shop. It powers up but that is all we know about it. We don't typically deal in this sort of equipment so this is a great deal for the person that does! We have other equipment available upon request. Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end. We reserve the right to end this auction early due to item being listed elsewhere.
|
|
|
Graham White Desiccant Air Dryer - Powder Coating
You are bidding on a Graham White 5 in 1 Desiccant Air Dryer that was removed from a working powder coating system. I have been in contact with Graham White and the parts to rebuild this unit are readily available. The unit sells new for $12.178.57. We don't typically deal in this sort of equipment so this is a great deal for the person that does! We have other equipment available upon request. Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end. We reserve the right to end this auction early due to item being listed elsewhere.
|
|
|
Nordson Corporation Multi Wrench (T-B)
Nordson Corp multi wrench 5 way. Thank you.
|
|
|
Wagner PI-P1/PI-F1 Powder Injector Pump, Nordson, Gema
AIS. LLC PO Box 208- Berlin. WI 54923 Sales- 920-361-5208 x 206 Wagner PI-P1/PI-F1 Powder Injector Pump. Can be used with Wagner. Nordson, Gema, Parker Ionics powder manual and automatic coating guns. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-14011145620-0x101-
|
|
|
SLIGHTLY USED - WAGNER Power Painter, Max Flow 5.4 GPH
SLIGHTLY USED- Power Painter. Max Flow 5.4 GPH They have come from store- Tried power that works perfect( using water) AS IS these pictures.
|
|
|
NORTECH powder vacuum - powder coating
NORTECH Powder Vacuum. In our warehouse. Cleaned up with new filter and ready to go! We have other equipment available upon request. Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end.
|
|
|
Dura-Block Model 007 Detachable Head HVLP Extreme Spray Gun In Case (Used/Good)
Dura-Block Model 007 Detachable Head HVLP Extreme Spray Gun In Case You are bidding on a pre-owned Dura-Block Model 007 Detachable Head HVLP Extreme Spray Gun In Case in Good condition. Item shows normal signs of use and has normal to high cosmetic wear such as scuffs. Scratches and marks. Typical signs of wear for a USED item. Item tested in-store and functions properly. Please be advised that this is a USED item. All items shown in the photos are included in this auction. Please feel free to ask questions and please bid with confidence! Thank you for looking. Auction Includes: Dura-Block Model 007 Detachable Head HVLP Extreme Spray Gun In Case All items shown in the photos are included! SKU# 369-23485-01 Terms and Conditions Payment: We accept payments via PayPal. Payment must be received within 7 days. Sales tax will be applied for local ... morepickups. And shipping to a Colorado address. Shipping: Shipments will be processed within one(1) business day of payment receipt. We ship only to PayPal Confirmed addresses. Shipping is calculated for the lower 48 states; No international shipping. Shipping to P.O. Boxes. AK, HI, VI, PR, APO/FPO addresses may occur an additional fee. All items are shipped via UPS or USPS. Shipping Calculator· We use the eBay Shipping Calculator to offer a fair cost to for this item. Please verify that your ZIP code is the default ZIP code. Local Pickup: Payment is still required within 7 days if you elect to do a local pickup; Sales taxes will apply. We accept cash. Visa, MasterCard, Discover, Amex, for local pick up in person. If you wish to pay through PayPal please request a new invoice. Item must be picked up within 14 days from payment date. Customer Service: Fast Cash prides itself on customer service. And we want to provide you with 5-star service on every transaction. The best method of contacting us with questions or concerns is through the eBay email system. You should expect a reply to your email within 24 business hours. Please allow us to try to m
|
|
|
CP865 Anti-Skid Binder, two gallon kit
ConcretePlus CP865 Anti-Skid Binder. Item Description: CP865 Anti-skid binder is a zero-VOC. Toughened, professional grade, two component, medium viscosity epoxy binder with good chemical resistance. This high build coating is commonly filled with aggregate to produce abrasion, corrosion, and impact resistant surfaces for parking decks, stair landings, driveways, and other traffic bearing surfaces. It conforms to current ASTM C 881 and AASHTO M-235 specifications. Regular selling price is $98.50 per two gallon kit. When applied at 100 mils as binder and dried aggregate is broadcast to rejection. The system build will be about 1/4" Coverage is 16 square feet per gallon when used as an anti-skid binder applied at 100 mils. Typical uses: Driveway sealer Garage floors Parking deck sealer Concrete bridge top sealer/ coating Broadcast aggregate ... morebinder For the technical data sheets and MSDS's give us a call at 918-615-0123. Ships via UPS ground. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1401c66aef2-0xfd-
|
|
|
REBUILT Wagner PI-P1 Powder Injector Pump, Nordson, Gema
Up for sale is a REBUILT Wagner PI/P1 Powder Pump. It has been rebuilt with new replacement parts from our warehouse. We also have hoppers. Pickup tubes, pump mounts and other related items available upon request. YOU ARE BIDDING ON ONE PUMP. IF YOU WANT MORE THAN PLEASE LET US KNOW. Shipping is FREE on this item so order more than just one! We have other equipment available upon request. Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end.
|
|
|
JBI Spray To Waste Powder Booth - 10'h x 12'w X 4'd
Up for sale is a Spray To Waste Powder Booth from JBI. It measures 10' high X 12' wide X 4' deep. Shipping is the responsibility of the purchaser. We ship equipment like this all the time and will assist in setting up shipping if you'd like. We will also load AT NO CHARGE! We have other equipment available upon request. Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end.
|
|
|
GEMA 6,000 CFM Diamond Series Powder Booth Collector with 3 Color Modules
Up for sale is a Dust Collector from a Diamond Series Powder Booth. The booth was scrapped but the Dust Collector and 3 Color Modules were going to be used to make a Batch Powder Booth. We never got around to that and now they are in the way. These will work perfect for that. Especially if you want to reclaim! Shipping is the responsibility of the purchase. We ship items like this all the time and will assist in setting up shipping and loading. NO CHARGE FOR LOADING! We have other equipment available upon request. Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-1402829c5a8-0x105-
|
|
|
2) GEMA 12,000 CFM Color Modules for Diamond Powder Booth
Up for sale are 2 GEMA 12.000 CFM Color Modules. I think these came off of a Diamond Series Powder Booth. Typically these sell used for about $5,000 each but we are trying to move some of our older inventory to make room for new inventory. We have new fluidizing plates and filters for these color modules that can be added for an additional charge! Shipping is the responsibility of purchaser and should be set up as such. We ship products like this all the time and will assist in setting up shipping if needed, we will also load at NO CHARGE! We have other equipment available upon request. Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within ... more7 days of auction end.
|
|
|
NORDSON SURE COAT MODULAR GUN CONTROL SYSTEM CABINET
NORDSON SURE COAT MODULAR GUN CONTROL SYSTEM CABINET Can be used for controlling Nordson Vers-Spray. Tribomatic and Sure coat guns. Operating Manual included Free Pickup or we can pack skid at no extra charge to ship freight. Freight shipping at buyer cost. Listed dimensions and weight are estimates. This cabinet was originally for 10 guns but it has one bad circuit board and is missing one hose connector plate on back of cabinet. This cabinet was in working condition for using 8 guns when taken out of service in May 2013. Cabinet will be a good choice when needing only 8 runs or less or a valuable source for parts for a similar cabinet. While cabinet was working when taken out of service I am selling it" AS IS"
|
|
|
ITW Gema 50 lb Fluidizing Powder Hopper w/ ITW Gema Powder Pump, Nordson Hopper
ITW Gema 50 lb Fluidizing Powder Coating Hopper Includes: 1- ITW Gema Powder Pump and pickup tube.
|
|
|
Nordson 100+ Powder Guns
Up for sale are 6 Nordson powder gun units. These are in our warehouse and need to be moved to make room for more inventory. We have a basket of miscellaneous guns and cables for these units. Probably more than necessary. You are bidding on one unit with guns and cables, buyers choice, or you can purchase the whole lot by contacting us. This style of Nordson Powder Guns are still used today and could be a great deal for somebody getting started in the industry. We will combine shipping. Shipping is the responsibility of the purchaser but we will assist with setting up the shipping and loading the equipment. We load out equipment like this all the time and there is NO CHARGE FOR LOADING! We have other equipment available upon request. Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With ... moreour new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end.
|
|
|
Rototec 800 Thermal Sprayer Eutectic+Castolin With Extras
Rototec 800 Eutectic+Castolin Sprayer Thank you for taking the time to look at this listing. The item being auctioned is a Rototec 800 Thermal Sprayer. It is being sold AS-IS because it is used and has not been tested. It comes with everything you see in the pictures including the yellow bottles. Three are full and the red has about half left. Please ask any questions you may have and I will be happy to try and answer them. Thank you for looking and Good Luck Bidding! U.S.A. Shipping Only Shipping Price Excludes Alaska/Hawaii
|
|
|
5 Used Powder Coating Hoppers, 1 Parts Hopper Nordson, Gema, Wagner
5 used powder coating hoppers. 1 hopper for parts. These are all in good working condition except for the parts one. I used them with a Nordson Surecoat and Versa Spray II guns, but I'm pretty sure they will work with other brands. I am only selling because I switched to a box feed gun. Posted with
|
|
|
Truck-Heavy Equipment Paint/ Spray Booth
This booth has only been used a few times(Practically new) Paint over spray does not even show up on the walls. The booth was sold. Installed, un-assembled and crated by Paint Booth Technologies. It is available for immediate delivery. Paint Booth Technologies will warranty the booth and AMU for 6 months. Available to be picked up or delivered from the Destine, FL area. This booth new and installed is over 100K. It will take 2- flat bed trucks to move this item. Crated and ready to go. It is 25'w x 14'h x 50'L Drive Through Pressurized Cross Draft Booth. See Drawing for detail.
|
|
|
Nordson Powder Coat Booth 36" W x 72" H - 2 Manual Guns - 20 Automatic
Nordson Powder Coat Booth. 36" High x 72" Wide. 2 Manual Guns. 20 Automatic Guns with 2 Reciprocators. The unit is disassembled and ready for shipping on your arranged transportation. Buyer is responsible for shipping arrangements and cost. Unit is available for pick-up at a warehouse with dock doors. Please e-mail any questions before you bid.
|
|
|
UltraTech 4100 48-oz. Pump Sprayers for Ultra-Ever Dry Set of 2 - LIGHT USE
DESCRIPTION Manufacturer- UltraTech Part Number- 4100 Part Weight- 2 Part Size- 12 x 7 x 6. Please review the pictures above carefully. You will receive everything in the pictures. Nothing else comes with this auction. CONDITION Minor Cosmetic issues. Cosmetic Comments: These look used but good. Refer to pictures for details. Great price! 10040261-C9.62MP45.84S11.0 Questions? 866-535-1936 A live person will answer the phone Mon- Fri 9-4 EST. SHIPPING& HANDLING Shipping Service/ Cost: Please refer to Shipping tab above. Ship To Locations: United States excluding Alaska& Hawaii. US Protectorates& APO/FPO. Order Processing Time: 1 business day. RETURN POLICY Return time period: 30 Days Refund will be given as: Money Back Return Shipping: Paid by buyer. Return Details: Item and package contents must be returned in the same condition ... moreyou received it.
|
|
|
Nordson 150lb. Hopper
This NORDSON 150LB HOPPER is in great shape and has a NEW fluidizing plate! Shipping is the responsibility of the purchaser. We ship items like this all the time and will assist in setting up shipping and loading. NO CHARGE FOR LOADING! Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end. We reserve the right to end this auction early due to item being listed elsewhere.
|
|
|
Gema Vibratory Box Transfer
This GEMA VIBRATORY BOX TRANSFER allows you to transfer powder from boxes. Includes 2 powder pumps! Shipping is the responsibility of the purchaser. We ship items like this all the time and will assist in setting up shipping and loading. NO CHARGE FOR LOADING! Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end. We reserve the right to end this auction early due to item being listed elsewhere. o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-1405c9effd8-0xfc-
|
|
|
2 Nordson Recips
These 2 NORDSON RECIPS have an 18" stroke- Cleaned up and ready to be loaded- These will be sold as a pair- We will load out of Illinois warehouse. Shipping is the responsibility of the purchaser. We ship items like this all the time and will assist in setting up shipping and loading. NO CHARGE FOR LOADING! Buy Rite Finishing has been buying and selling new and used powder coating equipment for over 10 years. With our new service and repair facility. We now rebuild equipment back to OEM specs too! We can be contacted at 888-647-9929 or visit us Must be paid within 7 days of auction end. We reserve the right to end this auction early due to item being listed elsewhere.
|
|
|
Redline EZ-50 Parts
Box of used parts for Redline EZ-50. This auction includes a box of mixed parts and disassembled EZ-50 systems. None of the guns work but can be used for parts. Powered by On Jul-23-10 at 20:36:37 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
Nordson Encore Powder Pump, Nordson powder pump
Nordson Encore Powder Pump. Features include: More powder with less compressed air for higher performance and savings, Lower velocity at the gun for more powder on the part. On the first pass, Fewer parts for lower operating costs, Lower velocity at the pump for less wear and longer life, Quick-Turn Throat Retainer for quick and easy routine cleaning and inspection of pump throat, jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-1405d94a8a3-0xfe-
|
|
|
Norklad 100 - 100% Solids Epoxy Clear Coat 3 Gal Kit
3 Gallon Kit Norklad 100 is a two component 100% solids epoxy broadcast coat that can be filled with decorative chips and colored sand mixtures to provide an infinite array of color schemes or patterns. It is 100% solids therefore has low odor. No flammability, and is self-leveling. When applied at 100 sq/ft per gallon, Norklad 100 will self-level to a glasslike surface. When to use Norklad 100: 100% solids is recommended for warehouses. Kitchens, restrooms, and other areas where either a high build clear product is needed or where a decorative filled floor is desired. Ideal for full broadcast terrazzo or colorchip floors. 100% solids is the industry standard for high-end commercial epoxy flooring. SOLIDS BY WEIGHT: 100% SOLIDS BY VOLUME: 100% VOLATILE ORGANIC CONTENT: Zero pounds per gallon COLOR: Clear RECOMMENDED FILM THICKNESS: 16-18 ... moremils COVERAGE PER GALLON: 90-100 square feet per gallon@ 16-18 mils PACKAGING INFORMATION 3 gallon kits MIX RATIO: 9.0 pounds part A(99 gallons) to 4.15 pounds part B(49 gallons) volumes approx. FINISH CHARACTERISTICS: Gloss(60 to 90@ 60 degrees@ Erichsen glossmeter) ABRASION RESISTANCE: Taber abraser CS-17 calibrase wheel with 1000 gram total load and 500 cycles = 36 mg loss FLEXURAL STRENGTH: 7.400 psi@ ASTM D790 COMPRESSIVE STRENGTH: 11.200 psi@ ASTM D695 ADHESION: 350 psi@ elcometer(concrete failure. No delamination) VISCOSITY: Mixed = 700-1000 cps(typical) TENSILE STRENGTH: 7.600 psi@ ASTM D638 ULTIMATE ELONGATION: 4.1% GARDNER VARIABLE IMPACTOR: 50 inch pounds direct– passed HARDNESS: Shore D = 81 CURE SCHEDULE: pot life– 1 1/2 gallon volume… 20-30 minutes@ 70° F tack free(dry to touch)6-8 hours@ 70° F recoat or topcoat. 10-16 hours@ 70°F light foot traffic.14-18 hours@ 70°F full cure(heavy traffic) 2-7 days@ 70°F APPLICATION TEMPERATURE: 55-90 degrees F CHEMICAL RESISTANCE: REAGENT RATING butanol C xylene C 1. 1, 1 trichloroethane B MEK A methanol A ethyl alcohol C skyd
|
|
|
BLACK LATEX TIRE PAINT (((5 GALLON CAN)))
Country Classic Black Tire Paint 7011 Series PRODUCT DESCRIPTION A premium series. Waterborne acrylic latex black tire coating designed for reconditioning new or used tractor or trailer tires. Gives a new look to old worn-out tires. Dries tack free in about 30 minutes. May be brushed, rolled, or sprayed. PRODUCT BENEFITS Excellent Color Retention Slight Angular Sheen Dries Tack Free in About 30 Minutes Easy to Apply Brush. Roll, or Spray Non Flammable VOC Compliant Environmentally Safe Soap& Water Clean Up Low Odor COLORS 7011 Black SURFACE PREPARATION Surface must be clean and dry. All substrates must be cleaned free of dust. Dirt, oil, grease, soap residue, wax, flaking paint, chalk, mildew, or other contaminants that might impede adhesion. Scuff sand slick, hard, glossy surfaces to promote adhesion. Refer to Surface Preparation Guide ... morefor more detailed instructions. APPLICATION Mixing: Stir each container thoroughly before using and occasionally while applying. No thinning usually required. If necessary. Thin with up to one pint of water to each gallon of paint. Application: Apply using a high quality brush. Roller or by spray. For airless application, use a 0.010-0.015” tip@ 1800 psi. Coverage: One gallon will cover approximately 400 square feet per coat on smooth surfaces. Coverage figure does not include spray loss. Loss due to surface porosity, surface irregularities, nor material loss when mixing. Cleanup: Clean spills. Spatters, hands, tools and other equipment promptly with warm soapy water. Give spray equipment a final flush with mineral spirits to help prevent corrosion. Dispose of used paint and waste in accordance with local, state, and federal regulations. Application Precautions& Limitations: Apply when surface. Air and product are above 50 F and at least 5 F above the dew point. PROTECT FROM FREEZING. Not for use on wood. Metal, or other surfaces that are constantly damp or wet. Do not use on floors or steps. TECHNICAL DATA(Based on 7011 Series) COLOR: Black. VEHICLE TYPE: Acrylic Latex. W
|
|
|
CP845 Epoxy Skim / Scratch Coating, two gallon kit
ConcretePlus CP845 Skim/ Scratch Coating. Item Description: CP845 Skim/ Scratch coating is a zero-VOC. Professional grade, two component, high viscosity epoxy with good chemical resistance. This item sells for $109.50 per two gallon kit, 1 gallon of the Part A and 1 gallon of the Part B are included in the two gallon kit. The two gallon kit is suitable to cover 40 sq ft at 40 mils thickness. Typical uses: Filling bug holes in formed concrete Filling large stationary cracks and joints Secondary containment and trough coating Patching small or large voids Spalled concrete and driveway/ garage floor patching For the technical data sheets and MSDS's give us a call at 918-615-0123. Ships via UPS ground.
|
|
|
QuaNix/QNix 4200 Paint Meter/Gauge (Fe 0-120mil)
QNix® 4200 was developed particularly for measuring tasks in the automobile industries. This compact gauge permits extremely precise measurements of lacquer and corrosion protection thicknesses. On steel and iron. With the practice-oriented product properties, professionals immediately recognize the handwriting of QNix gauges: With the QNix® 4200 precise measurements on steel. Iron and non-ferrous metals become simply perfect. Change between the measuring procedures by simply pressing on the button. No calibration. With high precision over the entire measuring range: Fe 120 mil. The sensitive measuring probe of the extremely small, light and handy QNix® 4200 is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation and serial number. The sensitive measuring ... moreprobe of the extremely small. Light and handy QNix® 4200 is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation and serial number. Extremely precise: High measuring accuracy over the entire measuring range. Simple operation: No calibration. Only one button. One-hand operation. Innovative technology: Proven Hall sensor technology. Integrated measuring probe without cables or plugs. Broad spectrum of use: Dual probe for measurements on steel and non-ferrous metals. Protective measuring: Polished ruby tip to protect both probe and surface to be measured. Gauge for standard applications- simple. Fast measurements. One-hand operation. Only one button. No calibration. High precision over the entire measuring range: Fe 120 mil Broad spectrum of use for nondestructive measurements on steel. Iron and non-ferrous metals such as aluminum, zinc, copper and brass. Compact design with integrated probe. Innovative. Proven technology: Hall sensor and Eddy Current technology. Acoustic signal for confirmation that measurement has been taken. Non wearing ruby probe tip for long term use. Optimal LCD Display: Larg
|
|
|
Reclaim Automatic Powder Booth, Nordson, Wagner, Gema
The following system is available for sale& inspection at my facility in Berlin. WI. The Reclaim automatic powder booth has recently been removed from service and is in great working order. Reclaim Automatic Powder Booth System Type of System: Side-Draft Powder Booth Profile opening: 36” wide x 60” high. Dimensions: 27’ long x 15’ wide x 11’6” high Plant Utilities: Electric: 480 volt. 3-phase, 60 hertz, Control– 110 volt. System specs& components: Side-draft. Cartridge style booth(12 cartridge, 4 final filter capacity each) 36” x 60” part opening, 12.000 CFM, 100 fpm face velocity, 2) 24” x 48” Manual openings, Stainless steel base w/ Stainless Canopy, 1) Control Cabinet with Master Control, 1) Color collector, 1) 80 lb color hopper w/ Azo Sieve, 2) Gun mounting stands, 3) Powder transfer pumps, Complete system control panel. 480 ... morevolt 3-phase, Complete pneumatic control system, FOB: Berlin. WI- Will load on customers truck. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14078a57e42-0x108-
|
|
|
Gema OPti-Tronic Powder Coating Box Feed System w/Easy select Gun
You Are Bidding On An ITW Gema Easy-B Vibratory Box Feeding Powder Coating System. This System Consists of the ITW Gema Easy Select Gun and Opti-Tronic Controller. These Units Were The Cutting Edge Technology Of Its Day* This Unit Up For Bid Today Has Been Thoroughly Inspected And Tested For Operational Integrity. All Worn Or Broken Parts Have Been Replaced[ 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-14079c22c6f-0x101-
|
|
|
Caswell Coatings HV Powder Coat Gun Adjustable Voltage 30kv-50kv
Caswell coatings adjustable voltage powder coating gun kit. Kit is 9 months old. Works great. Voltage is adjustable from 30kv-50kv for ease doing multiple coats. Uses foot pedal for ease of use also. Comes with 3 tips. 2 cups for easy color changes.
|
|
|
Used Steelman Burn-Off Oven
USED STEELMAN BURN-OFF OVEN ~~~Please call 714-293-9496 for your accurate shipping quote or to arrange a pick-up~~~ Used Steelman Burn-off Oven. Only $35.000! Please call 714-293-9496 for more information.
|
|
|
ITW GEMA EASYTRONIC CONTROL UNIT AND VIBRATING BASE
ITW GEMA EASYTRONIC CONTROL UNIT. VIBRATING BASE AND BOX OF HOSES! I DO NOT HAVE THE BOX FEED TUBE OR GUN. HAD SOMEONE BUY THIS FOR ME ONLY TO FIND THE GUN MISSING. NO USE TO ME BUT FOR SOMEONE WHO HAS A GUN OR NEEDS A CONTROL UNIT. EVERYTHING IS IN WORKING ORDER WITH 1341 HOURS ON THE DISPLAY.
|
|
|
NORDSON CARTRIDGE POWDER COATING PAINT BOOTH, ECONO-COAT
PRICE REDUCTION! SAVE $1000.00(inv#1261) NORDSON ECONOCOAT BATCH POWDER COAT CARTRIDGE BOOTH TORIT NRCS2000 COLLECTOR WITH 4 CARTRIDGES BOOTH SIZE APPROX 5' W X 4' H X 5' D HAS REVERSE PULSE CLEANING OF CARTRIDGE FILTERS ONE OVERHEAD FLOURESENT LIGHT FIXTURE INCLUDES ALL AIR REGULATORS FOR GUN CONTROL DOES NOT INCLUDE ANY POWDER GUN(I HAVE POWDER GUNS FOR SALE OTHER AUCTION) OVERALL DIMENSIONS APPROX. 9' LONG X 102" HIGH' X 6' WIDE APPROX WEIGHT 2000LBS OVERALL CONDITION IS GOOD. A FEW OF THE TUBING MIGHT NEED REPLACED COMES WITH COMPLETE CONTROL PANELS(REMOVED FROM WALL AND LAID IN BOOTH) THE BLUE CONTROL CABINET IS THE MAGNEHELIC GAUGES TO SHOW WHEN THE CARTRIDGES NEED TO BE CLEAN. THE GRAY CONTROL CABINET IS THE POWER DISCONNECT SWITCH 230/460/3 VOLTAGE
|
|
|
Used Lilly Industrial Coatings Apron good for decor
I don't know how old this heavy cloth apron, good condition for it's age shows shelf wear. Aged, worn, soiled, stains/spots, etc, 20 1/4" x 34" please see the pictures of the condition of this item. What you see is what you get, I do combine shipping. buyer pays hsipping and handling, delivery confirmation is included in the shipping. Insurance is your choice, If you have any questions. Please don't hesitate to ask. Be sure to add me to your! Check out my! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Nordson CK-04 powder booth. Part opening 36"W x 72"H Two manual gun positions.
Item#1062 Nordson CK-04 powder booth. Part opening 36"W x 72"H www.ontargetmachinebrokersllc.com Item#1062 On Target Machine Brokers LLC Call Kevin for all your questions 860-483-0905 Email: ontargetmachines@yahoo.com Nordson CK-04 powder booth. Part opening 36"W x 72"H. Two manual gun positions. Fire detection. Guns sold separately. Price $ 34.995.00 Rigging and Hauling Not Included www.ontargetmachinebrokersllc.com Call Kevin for all your questions 860-483-0905 ontargetmachines@yahoo.com
|
|
|
Gema Diamond Series Manual Powder Coat Booth, Dual Stairs and Openings
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Gema Diamond Series Manual Powder Coat Booth: 2) Manual Gun Openings. Polycarbonate Plastic Construction, Torit(8) Cartridge Dust Collector, 2) Gema PGC1 Gun Control Modules, Guns NOT INCLUDED with this unit) Allen Bradley PLC Controls, 2) Stair Sets, Quick Change Hopper, Overall Booth Size Approx. 72 In. X 104 In. X 240 In. Length, Product Opening Size Approx. 30 In. X 102 In. Located in OHIO and is"truck ready" Ships dismantled and shrink wrapped. USED. But in good working condition. Removed from working environment.
|
|
|
Powder Coating Business Oven, Booth, Powder Pressure washer, Gun, box Shaker
oven is 800.000 btu 20x10x8 Iontech Iontech Spray booth with extra filters Nordson box shaker Nordson Vantage Manual gun 3 years old Air Dryer Air storage Tank T30 Rand air compressor Fremont Phosphatizing Pressure washer 1000's of Hooks 7 8 foot racks 100's of boxes of powder Storage Rack All Spare parts for coating Still in operation until sells we will help with tare down. questions call 419-987-4414
|
|
|
Nordson Versa Spray Automatic Powder Gun Controller with Gun, Stand & Hopper
This listing is for a USED Nordson Versa Spray Powder Coat Controller with gun. Hoses, Stand and hopper This came from a storage auction. Please see pictures of the button on the front, button seems to operate We have not way of testing these units so they are sold as is No refunds Please ASK all questions before bidding/buying We describe auctions to the best of our ability and all items are sold as is unless otherwise stated. Make sure you are buying what you want because we do not offer refunds because you bought the wrong thing. PAYMENT Payment needs to be made within 2 days of auction closing via Paypal or Credit card We accept PayPal with a confirmed PayPal address. SHIPPING Items will either ship UPS this is a big heavy unit. shipping is estimated for the size. If you need an exact shipping please email me at kerri@kandsgraphics.com ... morePlease email through eBay’s Contact Member on the winning page. NO International SHIPPING*
|
|
|
Global Cartridge Powder Coating Booth
GLOBALPOWDER COATING BOOTH 6’ x 6’ x7.75’ recirculating cartridge filter powder booth. Requires no make-up air… cleaner shop andsaves heating costs during cold weather. Manual or automatic self-cleaning cycle. Powder can be reclaimed with additional equipment. Delivery Available Payment by money order only
|
|
|
Paint Booth with Rear Exhaust, Down Draft and Heat
Model DD 1218-10 RE Down Draft Paint Booth Rear Exhaust. With Heat. Manufactured by S. K. Bowling in 2010; used very little and in excellent condition. Item is physically located in Suffolk. Virginia SPECIFICATIONS. Model DD 1218-10 RE. BOOTH: 12' 0" wide by 18' long by 10'0" high inside. 12'4" wide by 21' long by 12'0" high outside. Pressure type paint spray booth. Booth fabricated of 18 gauge galvanized steel. With supply and exhaust filters. LIGHTS: Eight(8) 120 volt, 40 watt 48 inch fluorescent 4 bulb light fixtures, Front Access,Manufactured for Class I Division. II spray booth locations. Complete with high output color rendering bulbs. ENTRANCE DOOR: One doublemaindoors 9'6" highby8 ft.widewith windows. Latch, foamdoor seal, rubber bottomwiper seal, primed. And painted. One door 5' ... morewide and the other 3' wide. PERSONNEL DOOR: One personnel door 2 ft. 8 inches wide by6 ft. 8 inches high with window. Hydraulic closer, and foam rubber door. Seal. EXHAUST FAN: 34" 3 hp Tubeaxial fan with non-sparking aluminum blades for exhaust air to maintain booth pressure. EXHAUST DUCTS: One 34 inch dia. 24 gauge(with fan clean-out) and back draft damper(6 feet above roof) AIR MAKE-UP: 34" 3 hp Tubeaxial fan with non-sparking aluminum blades for intake air to maintain booth pressure. No heat is. Included. Supply Duct not necessary since we are using Plant air for air make up. Variable Frequency Drives to. Maintain booth pressure. SUPPLY DUCT: None Required. CONTROL PANEL: Remote control panel with standard controls for fans and lights. Mounted outside of booth. ELECTRICAL: Complete for lights. And controls. Call Ken at 949-243-4033(cell)
|
|
|
Nordson Prodigy Powder Pump
WE ARE OFFERING THIS NORDSON HDLV POWDER DELIVERY PUMP FOR THE PRODIGY GUN THIS HDLV PUMP IS DESIGNED TO DELIVER POWDER COATING MATERIAL TO THE NORDSON PRODIGY GUN WITH A HIGH LEVEL OF EFFICIENCY. THIS PUMP HAS BEEN TESTED AND ALL WORN OR DAMAGED PARTS HAVE BEEN REPLACED. WE ARE OFFERING THIS UNIT AT A STARTING BID THAT IS LESS THAN HALF THE COST OF OVER $1.770.00 NEW. BID WITH CONFIDENCE AND BID OFTEN Check out my!
|
|
|
Ransburg Gema Paintbooth Pump Drive Module 74302-01 USG
We will not remove items from eBay to sell directly. Free shipping service is only available in the Lower 48 States and only on qualified items. Condition Acronym Description: NIB(New In Box) NNB(New No Box) NOS(New Old Stock) USG(Used Surplus Guaranteed) MRG(Manufacturer Refurbished Guaranteed) PNW(Parts Not Working or Untested) Manufacturer: Ransburg Gema Item Title: Paintbooth Pump Drive Module Model Number: 74302-01 Description: Rev A Drive# 7430 Includes all hardware and plugs Condition: Used. Pulled from working environment. Quantity: 1 Guaranteed No DOA Please use the shipping calculator tab at the top of the page to determine your shipping costs. Please review the"Shipping and Payments" tab above the auction before purchasing. Some notes on Shipping: Free Shipping is for domestic orders only and will be shipped via Fedex ... moreSmartPost. Fedex Ground, Fedex Home Delivery or USPS Parcel Post depending on the weight and destination. Items weighing over 120lbs will be palletized and shipped via freight carrier. We get very good rates on freight shipments. Please use the shipping calculator to determine shipping costs. Shipping to a commercial location with loading dock or forklift is always the cheapest option for freight. Rush Delivery is available upon request. Please e-mail for quote(please include zip code) Handling Time is normally only 1 business day. Please use the shipping calculator to determine transit times. Holidays are an exception) Your tracking number will be emailed to you once your order has been shipped. A note to international buyers: FedEx International Economy& Priority shipping services are available for qualified packages worldwide. FedEx International ground service is available for Canada& Mexico. Package tracking and improved delivery times are advantages over USPS. E-mail us for a shipping quote. Please provide destination city, country, postal code, broker and broker phone number. CSI Surplus is not responsible for any duties. Taxes or any other fees that may be impose
|
|
|
Powdercoat Batch Oven Electric 480V 3 Phase
This a used 480V 3 phase electric Batch Oven. The outside dimensions are 123" total height and 10 ft. wide and 63" deep. The inside opening is 5 ft. wide 52" deep 66" high. We used it for powder coating and it will go to 500 degrees. Buyer is responsible for shipping and local pick up. Please email me if you have any question
|
|
|
benjamin moore pocket palette
Benjamin Moore color matching tool.simply place tool against color to be matched press button and read suggested color. Posted with
|
|
|
Hyper smooth powdercoating kit
Columbia coatings original Hyper Smooth powder coating system in good condition. This is the gun that started it all. Pro-level gun at an affordable price. Not to be compared with hobby level gun you buy from harbour freight, this gun is used by alot of the shops and will produce professional quality work. Comes with the powder you see in the pictures, most of them still full, more than enought to get you started. Only the nozzel in the picture are included, you can buy them fairly cheap at columbia platings if needed. It also needs a 1/2" rubber tubing which you can pick up at your local hardware store like home depot. Will ship from both canada or usa( on monday or tuesday) depending on buyers location. shipping will be 2-5 days for USA and 4-7 days for Canada.
|
|
|
ITW Gema PGC1 Manual Powder Coat System w/ ITW Gema PG1 Gun, Nordson
ITW Gema PGC1 Manual Powder Coat System w/ ITW Gema PG1 Manual Gun. Unit has been tested. E5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-140f911a325-0x101-
|
|
|
ITW Gema Volstatic PGC1 Manual Powder Coat System w/ ITW Gema PG Gun, Nordson
ITW Gema Volstatic PGC1 Manual Powder Coat System w/ ITW Gema PG Manual Gun. Unit has been tested.
|
|
|
ITW Gema Easy Tronic CG01 Manual Powder Coat System w/ Easy Select Gun, Nordson
ITW Gema Easy Tronic CG01 Manual Powder Coat System. W/ ITW Gema Easy Select Manual Gun. Unit has been tested.
|
|
|
Set of 2 Military Portable Fluorescent Lights MIL-PRF-44259D
Item is in great used working order. Everything works. No cracks. Very heavy duty. Each light is 3ft long. Posted with
|
|
|
Nordson Sure Coat Replacement Parts
This Auction is for Nordson Sure Coat replacement parts for the Nordson Sure Coat Manual Powder Coating Gun. Parts include the Multiplier. Parts# 288552, complete electrode assembly and Adapter Inlet for long Handgun, parts# 288547. All parts are in perfect working order as the Guns that the parts came from were just taken out of service and replaced by new powder coat guns. Shipping will be by USPS Priority mail at cost of $6.00. Thanx for looking and good luck bidding.
|
|
|
ITW GEMA OPTIFLEX OPTISTAR POWEDER COATING SYSTEM --- GREAT SHAPE
ITW GEMA OPTIFLEX OPTISTAR POWEDER COATING SYSTEM ITW GEMA OPTIFLEX OPTISTAR POWEDER COATING SYSTEM iN GOOD WORKING CONDITION PLEASE CALL OR EMAIL WITH ANY QUESTIONS 718-698-8400 All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND ... moreNY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275 lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-14107c615ae-0xf2-
|
|
|
Hotcoat powdercoating system w/ over 60 powders
Hotcoat powder coating system with over 60 powders. System is about 5 years old and works perfectly. All the powders are fairly close to full and there are only 2 or 3 doubles. I used to buy all the new colors to try them out. System is 110v wall outlet plug in and the powder coating comes out perfectly. Stopped doing it a few years ago and has just sat since then. System uses electricity and air to apply powder and all you need is an oven to bake it. I used an old stove and it worked for anything that fit. Please lookup powder coating if you are unsure about how it works. No international shipping and no bidders outside the U.S. Sorry.
|
|
|
Nordson Versa Spray Powder Coating Electrode and Multiplier
Your bidding on Nordson versa spray replacement parts for the Nordson versa spray Manual Powder Coating Gun. Parts include the Multiplier P/N 132349 complete electrode Assembly for long Handgun. Tested with KV Meter and are in perfect working order. It’s been recently taken out of service. As with all electronics this is sold“as is” If you have any questions please email before bidding.
|
|
|
Foam Sealant, Dap 12 Oz White Dap-Tex Plus Window & Door Foam Sealant LATEX BASE
Foam Sealant. Dap 12 Oz White Dap-Tex Plus Window& Door Foam Sealant LATEX BASE C2-2-12 Powered by
|
|
|
Xiom 1000 Thermal Spray Plastic Powder Coater
This is the X1000 Thermal Spray Plastic Powder Coating machine. Good for coating and protecting anything you can imagine. Xiom Corp makes a wide variety of powders for this machine good for coating wood. Metal, concrete and marine vessels among other applications. Comes with the Xiom 5000 Scorpion gun attachment for the X1000 machine.
|
|
|
Nordson Encore Manual Powdercoat Hand Gun
A used but fully functioning Nordson Encore powder coat manual hand gun. Some new parts. These manual Nordson guns are as good as it gets. Digital menu/recipe can be selected remotely with the toggle switch at the trigger. Excellent smooth application and adhesion. I have used this gun since it was new in 2010. We purchased it new for $2100.00 There is a very low reserve. Paypal only.
|
|
|
Used Sames GCM-200 Powder Coat Spray Gun and power source
This is a used Sames GCM-200 Powder Coat Spray Gun and power source. Because of the type of powder coating we do here we no longer use this gun. It is designed for a remote feed from a nearby box of powder with a feed tube. We modified the feed block(basically just pulled the feed tube out)and mounted it to the gun so that we could use our screw on quart containers to accommodate our frequent color changes. Changing back to a remote feed will not be a big deal and we can do it here if you need us to. It is a 100 KVA gun so it has plenty of power to lay a few mils on or do second coats. Buyer pays actual shipping cost. Thanks!
|
|
|
Automatic powder spray system, Versa II, 6 guns and controls in tower
Nordson Versa II Automatic Powder Spray System. 6 automatic guns Controllers in tower with master controls Lot of air hoses and air manifolds All hoses and cables included. Good working condition. NOTE THAT WE OFFER TWO GUN STANDS in a separate listing. See our listing No. 121170373841for details and pricing Ship in large wood crate. 72" long x about 30" X 30" 650 lbs.
|
|
|
NORDSON SINGLE GUN MANUAL CONTROLLER 288812E
NORDSON SINGLE GUN MANUAL CONTROLLER PART NO: 288812E SERIAL NO: AA01F01025 INPUT: 85- 250 VOLTS 50/ 60 HZ 1 PHASE 2 AMPS MADE IN U.S.A MEASURES: 16" x 7" x 10" WEIGHT: 19 LBS PLEASE EMAIL FOR LOCAL PICK UP TIMES AND FREIGHT CHARGES. BUYER IS TO UNDERSTAND OUR TERMS AND CONDITIONS PRIOR TO PURCHASE CALIFORNIA RESIDENTS PAY SALES TAX
|
|
|
Powder coating equipment- Versa spray misc parts
5 brand new resistors. 3 brand new tips, 2 brand new tubes dielectric grease, 2 used hose connectors and resistor replacement instructions manual for Versa spray gun. Posted with
|
|
|
Powder coating equipment sure coat misc parts
3-Nordson 100 plus complete pumps. With used handle a trigger, and 3 gun tips Posted with
|
|
|
Nordson Versa Spray Manual Powder Coating System, Gun, Pump ect.
Your bidding on a used but low usage Versa Spray manual powder coating system which includes the controller. Gun w/ extra nozzle& new trigger service kit, inlet air hose, Nordson powder pump with proper fittings and hoses to connect to the controller. Tested and in working condition. As always with electronics it is sold"as is" Includes everything seen in photos. If you have any questions about this item or regarding shipping, please email before bidding. Check out our current and upcoming auctions. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14158b5defc-0x100-
|
|
|
GEMA OPTITRONIC TYPE CG02 RACK 10 UNITS
Rack of(10) Units. We were told all are working as they should. No guns at this time. Will prep and load for free.
|
|
|
GEMA OPTITRONIC TYPE CG02 RACK 8 UNITS
Rack of(8) Units. We were told all are working as they should. No guns at this time. Will prep and load for free.
|
|
|
JPW 15kw Industrial Oven 500F 4'x4'x6' 1ph 220-240V
JPW Industrial Oven 4'x4'x8' 15kw single phase 220-240v 450-500F Used by small powder/ceramic shop reliably for 6 years. Oven still works perfectly. Replacing with larger 3 phase oven. Was purchased new in 2006 from Eastwood's HotCoat division. Can be set up in a garage or shop with single phase power. Will run on 208V 3 phase but not well. Buyer responsible for shipping. We will put on pallet for transport. Weighs about 2000 lbs. Please contact with questions. Auction is no reserve!
|
|
|
automatic paint spray guns, Graco, Devilbiss, Iwata
Selling 3 automatic paint spray guns. Used in very good conditions, these guns used for testing only a few times, the Graco is a XT model part number 249395 with a manifold included and a 1.4 fluid tip set up, second gun is a Iwata GFA-200 and a 0.8 fluid tip, third gun is a Devilbiss AGMD-515 with a 1.4 fluid tip set-up and a quick realesse manifold included, all gus are HVLP and are in good working conditions,
|
|
|
Parker Ionics Complete Powder Coating Unit, GX7000S, GX355 Console, GX121 Gun
Parker Ionics Complete Powder Coating System General Info: Stock# GS-131037-2 Condition: Used Tested: Partially Tested Brand: Parker Model(s) GX7000. GX7000S, GX355& GX121 Serial: Shown Below in photos Year: N/A Location: Stone Mountain. GA Specifications& Additional Information: Package includes: Parker Ionics GX355 Automatic Powder Coating Spray Console. Parker Ionics GX7000S Manual Stand Powder Coating Unit, Parker Ionics GX7000 Modular Hopper& 1) Manual Powder Coating Gun. Additional Info: Unit has been plugged up to power and Console turns on. Other than that we have not tested any other parts of unit. We have two complete units available for sale. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1308-A Beverage Drive Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery ... morelisted before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
 |