Wedgelock W88020 Hex Nut Cleco Runner Air tool-Aircraft Tools
Wedgelock W88020 Hex Nut Cleco Runner Air tool-Aircraft Tools. Works great. Has nicks and scratches. Shipping to the USA only. Thank you for looking. Please check my other auctions.
|
|
RIVET SQUEEZER, AVERY TOOLS 7515, CHICAGO PNEUMATIC 214 AIRCRAFT SURPLUS TOOL
AIRCRAFT SURPLUS TOOLS THIS TOOL CAME FROM L3 AND HAS THE TOOL NUMBER ENGRAVED IN IT. PNEUMATIC RIVET SQUEEZE USED AND IN GREAT CONDITION TESTED AND WORKS GREAT THIS IS MY LAST ONE HAPPY BIDDING
|
|
CP Chicago Pneumatic Rivet Squeezer 214 Aircraft Air Gun Tool
Chicago Pneumatic rivet squeezer. Used in good working condition. Has been cleaned. Serviced, tested and repainted. Model 214• USPS Priority Mail Shipping This tool is guaranteed to work as described. Other nice aircraft tools listed. Always happy to combine shipping.
|
|
NICE !! POP FASTENER RIVET GUN NO. 5600
NICE! POP FASTENER RIVET GUN NO. 5600 Working air pressure: 5.8 bar or kgf/cm2(85 psi) Air consumption: 3.25 litre free air/set rivet(0.02 cf/rivet) MCS air consumption: 56.6 litre free air/minute Overall length with MCS collector bottle: 312mm(12.3" Weight: 2.3kg(5.1 lbs) Comes as Shown* Discounted shipping available when MORE THAN one item is purchased but must send invoice request* If item is not paid within THREE days it will be relisted unless we are contacted* The max number of days we will hold items for you is 3 days*
|
|
Cherry max riveter 704 GBP B with 456 offset pulling head
GBP 704 cherry max riveter with 456 offset pulling head. No air or fluid leaks. New fluid and bled. Cleaned air inlet body. Tested with-5 cherry max and pulled good.
|
|
Olympic , Allfast , Huck rivet pullers riveter gun noses and pullers lot of 12
These items are used and have engravings and or initials on them. One hand puller.2 right angle pullers riveters gun nose Allfast-RV 812, 1 All fast-RV827, 4- 3 Olympic RV812, 2 are Allfast& a 3/32 Allen for.1 Huck- ISD 99-2809CH. 1 hole pin& Lot of 12. All I believe are in working condition.
|
|
Industrial Rand AVC 13 4x Rivet Gun Hammer Aircraft Air Tool L@@K
You are Bidding on a really nice use Industrial Rand AVC 13 Rivet Gun Hammer Aircraft Air Tool. It has been powered up and tested.
|
|
AIRCRAFT - D-100-RN HYDRAULIC BLIND RIVET FASTENER & NUTSETTER INSTALL. KIT
AIRCRAFT D-100-RN HYDRAULIC BLIND RIVET FASTENER& NUTSETTER INSTALLATION KIT Mfgr. is Fastening Systems International. This tool was used in aircraft restoration projects 20 years ago and worked great. Certified for Aircraft Aerospace. Safely stored. Bags of Misc. sized Steel Rivets and Installation Nuts. Operating instructions. Misc. Parts. Hard plastic storage Box. I do not mail outside the USA.
|
|
Aro AVK 8518 Threaded Insert Installation Air Tool 1/4"-900RPM- Aircraft Tools
Aro AVK 8518 Threaded Insert Installation Air Tool 1/4" 900 RPM- Aircraft Tools. This tool is in nice condition and works as it should. No other mandrels are included. Shipping to the USA only. Please check my other auctions Thank you for looking Air Rivnut Tool. Clinch Nut Tool.
|
|
SPIRALUX RIVETER TOOL
SELLING MY FATHER IN LAWS'SPIRALUX' THIN SHEET NUTSERT KIT RIVETER TOOL.MADE IN ENGLAND PLEASE CHECK THE PHOTOS BEFORE YOU BIT.THANK YOU.
|
|
Aerospace Aligator Pneumatic Rivet Squeezer
Aerospace Aligator Pneumatic rivet squeezer with squeeze sets. Cup sets 3/32. 1/8, 5/32, 3/16 and 4 flat sets. Squeezer works great and guarantee to work.
|
|
(2) Collar Removal Tools. Fastener Removers. Aircraft Tools, .401 Shank
Up for auction are(2) collar cutter. Removal tools. 401 shank OAL is 8" 1) VIM H1 1/4(1) VIM H1 3/16 What you see is what you'll get. Thanks
|
|
STUBBY PNEUMATIC RIVET GUN WITH 3 SETS
US Aerospace Tools stubby pneumatic rivet gun with 3 sets. Air pressure regulator and two springs. Used. But in great condition, marking on the handle.
|
|
28 PCS CUPPED RIVET DIE SQUEEZER SET K652
You are bidding on 28 Piece Cupped Rivet Squeezer Dies. Most are marked K652. You get a variety of sizes: 1/8. 3/32, 3/16, 5/32. I purchased a tool chest that is full of Aircraft Tools. There were bags of these rivet squeezers. They appear to be used. I have quite a few of these if you need more. Please take a close look at the photographs and ask any questions you have BEFORE bidding I try to describe the items as best as possible. But sometimes I do make an error, and I’ll be more than willing to work with you. Please review the shipping and payment information below- it will answer most related questions: Payment via Paypal. Is due within 3 days of auction close. I take great care in packing my items and insure all my shipments. I keep my handling costs as reasonable as possible and include cost of materials and insurance in those costs. ... moreIf you win multiple items. Please wait for a combined item invoice before you pay, it will arrive within 24 hours. Only items paid for together on a single combined item invoice are eligible for a shipping discount. Shipping is normally USPS Priority Mail. I do utilize Parcel Post for bulky items and Media Mail for books. No warrantees are implied or given. All items are sold“AS-IS” Please use the shipping calculator to determine rates to your zip code or country. The calculator is located at the bottom of this page. Shipping rates are not negotiable. So please view them before bidding. Orders that total $200 or more require signature for delivery. I do not falsify customs forms for international shipments. Including listing a reduced value. International buyers are responsible for any customs. Duties, etc. imposed by the buyer's Home country. I accept returns only if the item was not as described in the Auction. Buyer has 3 days to inspect the item and contact me if any issues appear. Item must be returned within 7 days of receipt or receiving refund approval; buyer is responsible for all shipping charges. The goods will be inspected upon return and a refund will be prov
|
|
18 PCS CUPPED RIVET DIE SQUEEZER SET MM200
You are bidding on 18 Piece Cupped Rivet Die Squeezer Set. These are marked MM200. You get the following sizes: MM200-2S 5/32 MM200-2 1/8 3/32 3/16 MM200-3 two 1/8. Two 3/32, two 3/16, two 5/32 MM200-4 5/32 MM200-5 two 1/8. 5/32, two 3/16 I purchased a tool chest that is full of Aircraft Tools made by Snap-On. There were bags of these rivet squeezers. I have quite a few of these if you need more. Please take a close look at the photographs and ask any questions you have BEFORE bidding. I try to describe the items as best as possible. But sometimes I do make an error, and I’ll be more than willing to work with you. Please review the shipping and payment information below- it will answer most related questions: Payment via Paypal. Is due within 3 days of auction close. I take great care in packing my items and insure all my shipments. I keep ... moremy handling costs as reasonable as possible and include cost of materials and insurance in those costs. If you win multiple items. Please wait for a combined item invoice before you pay, it will arrive within 24 hours. Only items paid for together on a single combined item invoice are eligible for a shipping discount. Shipping is normally USPS Priority Mail. I do utilize Parcel Post for bulky items and Media Mail for books. No warrantees are implied or given. All items are sold“AS-IS” Please use the shipping calculator to determine rates to your zip code or country. The calculator is located at the bottom of this page. Shipping rates are not negotiable. So please view them before bidding. Orders that total $200 or more require signature for delivery. I do not falsify customs forms for international shipments. Including listing a reduced value. International buyers are responsible for any customs. Duties, etc. imposed by the buyer's Home country. I accept returns only if the item was not as described in the Auction. Buyer has 3 days to inspect the item and contact me if any issues appear. Item must be returned within 7 days of receipt or receiving refund approval; buyer is
|
|
AT140A-6, 3/16" Hi Shear Rivet Set Knockout Punch
This is a USED AT140-6 Knock Punch. 401" Shank OAL: 3-1/2"
|
|
leather linemans tool pliers / knife
Up for auction is a leather linemans tools kit with knife and pliers.nice condition! I do combine shipping for US buyers. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale! Payment is due within 72 hours end of auction.
|
|
13 7/64" allen hex tools
Up for auction is 13 7/64" allen hex tools. These look unused. Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
10 Snap On allen wrench sets for parts READ ITEM DESCRIPTION!!!!!!!!
Up for auction is 10 Snap On incomplete allen wrench sets. Sold'As Is' With no returns. Happy bidding! Combined shipping MAY not be available on this lot of tools. Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
4 Snap On wrenchs # XD2024
Up for auction is 4 Snap On wrench's# XD2024. These look unused and have no engravings! Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
4 incomplete radius gauge sets SPI Machine shop tools
Up for auction is 4 incomplete sets of radius gauges. There is probably at least 1 full set if you mix and match. Made by SPI and Mitutoyo. Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Pneumatic impacts for parts READ ITEM DESCRIPTION!!!!!!!!
Up for auction is a lot of pneumatic impacts for parts. Makers include Chicago Pneumatic, Ingersoll Rand and Snap On. Sold'As Is' with no returns. Happy bidding! Combined shipping is not be available on this lot of tools. Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Dotco Cleco pneumatic drills for parts READ ITEM DESCRIPTION!!!!!!!!
Up for auction is a lot of pneumatic drills for parts. Makers include Dotco, Cleco, Aro and Ingersoll Rand. Sold'As Is' with no returns. Happy bidding! Combined shipping is not be available on this lot of tools. Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Hex nut cleco runners for parts READ ITEM DESCRIPTION!!!!!!!!
Up for auction is a lot of hex nut cleco runners for parts. Makers include Cleco, Wedgelock and Rockwell. Sold'As Is' with no returns. Happy bidding! Combined shipping MAY not be available on this lot of tools. Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Jiffy Sioux Desoutter angle drills for parts READ ITEM DESCRIPTION!!!!!!!!
Up for auction is a lot of angle drills for parts. Makers include Jiffy, Sioux, Desoutter, Pan American. Sold'As Is' with no returns. Happy bidding! Combined shipping MAY not be available on this lot of tools. Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
10 Snap On FAR 25 air ratchets for parts READ ITEM DESCRIPTION!!!!!!!!
Up for auction is 10 Snap On FAR 25 air ratchet's. 2 Snap On FAR 2500 and 1 each Sioux, Blue Point and Ingersoll Rand air ratchet's ALL for parts. Most turn just have no torque. Sold'As Is' with no returns. Happy bidding! Combined shipping MAY not be available on this lot of tools. Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Sioux, Snap On Blue Point grinders for parts READ ITEM DESCRIPTION!!!!!!!!
Up for auction is mostly Sioux. Snap On and Blue Point grinders for parts, these are parts and pieces for parts and pieces. Sold'As Is' with no returns. Happy bidding! Combined shipping MAY not be available on this lot of tools. Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14bd986dd6b-0x115-
|
|
Antique Vintage Huck Manufacturing CO. Air Rivet Gun Detroit Model B26
Hello for sale is an extremely rare(the only one known to exist) air rivet gun made by the famous Huck Manufacturing Company out of Detroit Michigan. The serial number is 80 which puts it into the very first air rivet guns ever made and was built to work on Military aircrafts during the war. This beauty is in ridiculously great shape almost mint and the crank spins so easy you can spin it without even touching it. All knobs screw and unscrew with ease and is rust corrosion free. You will never see this piece of history again as it is currently the only one known to exist and the oldest.
|
|
Pneumatic Air Tool Cp-214 air craft rivet tool
CP-214 WIDE MOUTH COMP RIVET TOOL WORKS GREAT
|
|
MARSON ALCOA M-3 3/16 AIR HYDRAULIC RIVET GUN RIVETER MODEL 39054 GOOD COND
Marson M-3 air riveter comes exactly as shown. Normal usage. Overall very good condition and works nicely. Additional info as follows below. If actual shipping is less than calculated then you'll receive a rebate. Winning bidder pays S&H. THANKS AND GOOD LUCK! This heavy-duty air/hydraulic riveter with its newly designed aluminum forged head can hold up under demanding continuous use. The steel forged head allows for continuous full operating power and less internal wear. The M-3 will set blind rivets from 1⁄8" diameter in all alloys. Up to 3⁄16" It generates a Pulling Force of about 2000 Lbs. The recommended airline pressure is 85-95 PSI. Weight: 4.2lbs. The Marson M-3 retail price is about $260 to $325. On Mar-02-15 at 20:12:17 PST. Seller added the following information: On Mar-02-15 at 20:12:44 PST. Seller added the ... morefollowing information:
|
|
Aircraft tools Atlas Copco 9/32" hex drive pancake nut runner
Up for auction is a Atlas Copco 9/32" hex drive pancake nut runner. Turns well around 450 RPM, works well! Happy bidding! I do combine shipping for US buyers. Buyers using the International Shipping program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! Payment is due within 72 hours end of auction.
|
|
Huge Lot Of Huck And Cherry Max Parts Sold In As Is Condition. See Description
This is a huge a lot of parts for Cherry Max in hut guns I believe several of these will be in good working order but this is an as is buy. Please feel free to ask any questions.
|
|
Aircraft tools United Air Tools 9/32- 40 threaded pancake heads . smooth!
has been moded to fit in tight areas. has been grinded on. the tool is in 100% working order.
|
|
3/16" CUPPED RIVET SET .401 SHANK AIRCRAFT TOOL AT 100A-3-3/32ANA70 GREAT SHAPE
3/16" CUPPED RIVET SET.401 SHANK AIRCRAFT TOOL AT 100A-3-3/32ANA70 GREAT SHAPE UP FOR BIDDING IS A 3/16" CUPPED RIVET SET.401 SHANK AIRCRAFT TOOL. GREAT SHAPE. HAS SOME STORAGE WEAR ON IT, PLEASE LOOK AT ALL THE PHOTOS BEFORE PLACING BIDS, UNFORTUNATELY DUE TO USPS RAISING THEIR PRICES. WE HAVE HAD TO RAISE SHIPPING. WE DO COMBINE SHIPPING. IF IT FITS IT SHIPS! WE STRONGLY SUGGEST COMBINED SHIPPING ON MULTIPLE ITEMS. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat rate shipping and have notified us.California residents are subjuct to ... morestate tax. We gladly combine shipping.We use usps flat rate mail for the majority of our shipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page
|
|
Ingersoll Rand AVC 13 Pneumatic Riveting Hammer - Made in U.S.A.
Ingersoll Rand AVC 13 Pneumatic Riveting Hammer- Made in U.S.A. Up for auction is a Ingersoll Rand AVC 13 Pneumatic Riveter- Made in U.S.A. In good working condition. Has many digs and scratches. See photos. Tested. Satisfaction Guaranteed! USA bidders only please. Sorry no international shipping. Our shop is located in Lancaster. CA- You can pay and pick up in person if you like. We accept PayPal. Postal MO, or VISA/MC/Cash if picking up locally. California residents will pay 9.0% sales tax. Any questions please call Jared at(661) 949-7707. Thanks for looking. And Good Luck! Please pay using PayPal. Or contact us for other payment methods, including Postal MO. 661) 949-7708 Ask for Jared. gsrx_vers_586(GS 6.8(586) 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14be2f07476-0x10f-
|
|
Pneumatic A Squeeze riveter with New Tote Bag
Atlantic Air Tool Pneumatic A Squeeze Butcket bass tote bag
|
|
CHERRY TEXTRON MODEL G704B W/ H701B456 Pulling Head *NO RESERVE*
Have a completely refurbished cherrymax G704 installation too with pulling head. This unit is ready to pull some fasteners. Jaws in pulling head are brand new so this tool has plenty of life. Feel free to ask with any questions you might have!
|
|
Aircraft tools Dotco 600 RPM palm drill
Up for auction is a Dotco. 600 RPM mini palm drill with 0-1/4" chuck capacity. works well! Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14be2f0743b-0x11b-
|
|
GAGE BILT CHERRY MAX POWER RIVETER GBP744
We are Selling a Brand New Gage Bilt Cherry Max Power Riveter P/N: GBP744. This product is rebuilt and in great working condition. Specifications-Designed specifically for the efficient installation of 1/8” thru 1/4” Cherrymax® and High-Clinch rivets. As well as a wide range of blind rivets-Just over 7 lbs. and can be operated in any position with one hand- 590” rivet setting stroke-3.800 pounds on 90 psi air pressure-Stays below 85 db and consumes 6.5 cfm at 20 cycles per minute at 90 psi of air pressure Please call us if you have any questions and ask for AJ! 310-632-5400
|
|
Chicago Pneumatic CP214 Rivet Squeezer CP-214 Riveter, Rivet Gun with dies
this is in good operating condition. includes the bits you see. US sales only
|
|
Aircraft tools Sioux drill # SDR10P40N2, 4000 RPM
Up for auction is a Sioux drill# SDR10P40N2. Turns true at 4000 RPM.has 0-1/4" chuck capacity. NO CHUCK KEY. Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Extended Rivet Sets
Set of straight and offset extended rivet sets. Light use on a couple of them. Other than that they are like new.
|
|
ALUMINUM RIVET CUTTER RIV-KUT TOOL STEN MANUFACTURING CO.
THIS IS A RIV-KUT ALUMINUM RIVET CUTTER AND FROM WHAT I CAN SEE IT SHOULD WORK GOOD. IT HAS THE ORIGINAL BOX. THE BOX IS TAPED AND BEAT UP BUT THE RIVET CUTTER LOOKS VERY NICE. THANKS FOR LOOKING. I DO COMBINE SHIPPING.
|
|
GP General Pneumatics Inc. Machine for Rivetering - Model 3000C & 6000CSA - USA
GP General Pneumatics Inc. Machine for Rivetering- Model 3000C(Squeeze) 6000CSA(Frame) with Pedal is working and in Very Good Condition. Because it is Big and Heavy. I will take the top(Squezee 3000C) APART from the FRAME for Easy to Shipping. Made in USA. Paypal and Domestic Shipping Only! Thanks!
|
|
1/8" CUPPED CURVED RIVET SET .401 SHANK STYLE B TYPE 11 CLS 3 SHAPE 0
1/8" CUPPED CURVED RIVET SET.401 SHANK STYLE B TYPE 11 CLS 3 SHAPE 0 UP FOR BIDDING IS A 1/8" CUPPED CURVED RIVET SET.401 SHANK STYLE B TYPE 11 CLS 3 SHAPE 0.401 SHANK AIRCRAFT TOOL.GREAT SHAPE. HAS INITIALS ETCHED ON AND SOME STORAGE WEAR. PLEASE LOOK AT ALL THE PHOTOS BEFORE PLACING BIDS, UNFORTUNATELY DUE TO USPS RAISING THEIR PRICES. WE HAVE HAD TO RAISE SHIPPING. WE DO COMBINE SHIPPING. IF IT FITS IT SHIPS! WE STRONGLY SUGGEST COMBINED SHIPPING ON MULTIPLE ITEMS. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat rate shipping and ... morehave notified us.California residents are subjuct to state tax. We gladly combine shipping.We use usps flat rate mail for the majority of our shipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page
|
|
Zephyr Mini Offset Pneumatic Hi Lok Installation Tool Kit Aircraft Riveter
This kit works like new and is very lightly used. It is made by Zephyr Tool. It comes with the mini reversible Aro offset runner. 5 different sizes of sockets, Allen keys, and steel storage case. The sizes of sockets included are 9/32" 5/16" 11/32" 3/8" and 7/16" The sockets simply snap in and out. Very simple to use. This kit sells new for almost $1700.
|
|
Emhart Pop PRG520A Pop Rivetool with MCS500 Mandrel Collection System
Emhart POP PRG520A POP Rivetool with MCS500 Mandrel Collection System Designed to pull most of the following OPEN END RIVETS: 3/32" Aluminum/Aluminum 3/32" Aluminum/Steel 3/32" Steel/Steel 7/64" Monel/Steel 1/8" Aluminum/Aluminum 1/8" Aluminum/Steel 1/8" Steel/Steel 1/8" Monel/Steel 1/8" Stainless/Stainless 5/32" Aluminum/Aluminum 5/32" Aluminum/Steel 3/16" Aluminum/Aluminum 3/16" Aluminum/Steel Designed to pull most of the following CLOSED END RIVETS: 1/8" Aluminum/Aluminum 1/8" Aluminum/Steel 5/32" Aluminum/Aluminum 3/16" Aluminum/Aluminum Comes with 3 Nose Pieces. 1/8" PRN-414) 3/16" PRN-614) Cannot read the number of nose piece in tool. Manual for PRG520A Included. Tool is being sold as is. Please read note on tool condition above. Please do ... morenot purchase this tool if not accepting the trigger does not pull and tool is being sold as is. The Emhart POP pneumatic rivet tools are the bull of the riveting tool industry and will make an outstanding addition to your tool assortment!
|
|
DAYTON PNEUMATIC GUN 4CA32 WITH ACESSORIES AND IN CASE/GREAT WORKING ORDER
Item for bid- Dayton Pneumatic Riveter. The winning bidder will be shipped a Deluxe Dayton air Rivet Gun. In Carrying case, with accessories seen in the picture that includes 3 different size nipples. It has a swivel quick disconnect air chuck, 1/2" It is in great working condition. Still works as good as day one. It is not in as good of cosmetic condition as day one but not bad. Note- The hard plastic case its in says Craftsmen. Not Dayton its not the original case. Please check my feedback to see that I am an honest seller. I also have very fast shipping. If you have time I would love for you to see the other items in my store. I put new items daily. And I have a wide variety of different things to offer. Thank you sincerely for your time and for buying my items.
|
|
Chicago Pneumatic CP131 rivet hammer
Item is used but in perfect working order. 14 day money back. US shipping only. Must pay within 3 buss. days of winning. Thanks much for looking.
|
|
Right Angle Riveter Head FSI 1075H NEEDS SPRING AND REPAIR SELLING PARTS
Right Angle Riveter Head FSI 1075H NEEDS SPRING AND REPAIR SELLING PARTS THIS Right Angle Riveter Head FSI 1075H IS UP FOR BIDDING. COMES AS IS. NEEDS A SPRING AND REPAIR. SELLING THE PARTS IN A LOT. RIVETER IS IN VERY GOOD CONDITION AS WELL AS THE OTHER PARTS. PLEASE LOOK AT PICTURES BEFORE PLACING A BID. UNFORTUNATELY DUE TO USPS RAISING THEIR PRICES. WE HAVE HAD TO RAISE SHIPPING. WE DO COMBINE SHIPPING. IF IT FITS IT SHIPS! WE STRONGLY SUGGEST COMBINED SHIPPING ON MULTIPLE ITEMS. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat rate shipping ... moreand have notified us.California residents are subjuct to state tax. We gladly combine shipping.We use usps flat rate mail for the majority of our shipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page
|
|
APT C Rivet Squeezer (705)
APT C Rivet Squeezer(705) Description- Model: 705- Manufacturer: APT- Throat Gap: 1 ½” Reach: 3” Total Yoke Gap: 3” Lower Offset: 3/8” Overall Length: 11” 11078(NRN) 2/27/2015 Shipping. Size and Weight: You are welcome to arrange your own shipping. All orders are shipped within 1 to 3 days prioritized from the date we receive payment. Not counting weekends and holidays. The USPS has a 70 lb weight limit with dimensional restrictions. UPS has a 150 lb weight limit with dimensional restrictions. International weight and size restrictions vary. We will ship your item to the most cost efficient way we can provide. We do allow local pickup at our facility in Fort Worth. Notice: Regardless of the carrier used. The receiver is responsible for thoroughly inspecting the shipment immediately upon receipt as well as noting any specific damage on ... morethe delivery receipt before signing. If no damage is noted on the delivery receipt at the time of delivery the receiver affirms that the item has been fully inspected, is undamaged and is as described in the listing. The Tool General will not accept the return for refund of any item/items that have undocumented damage. If a damage claim is filed after the delivery with no damage noted on the original receipt the liability will be reduced to 25% of the cargo value. This is a summary of Section 48 of the‘UPS Rate and Service Guide’ dated 2012. Questions: We strive to answer all messages within 24 hours. During the holidays there may be a longer response time. Also. Be sure to add us to your favorites list and to sign up for our to be updated about weekly new arrivals. Please feel free to with any questions. Comments or concerns. Click on the logo above to see our store! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
GBP cherry riveter 704 RK
Good working riveter that has new fluid and been bled. It has been tested with-5 cherry max rivet and pulled it fine. Ready to go. It has installed a 456 offset pulling head that works great.
|
|
2 nut runners pneumatic screwdrivers for parts repair cleco
2 pneumatic screwdrivers/nut runners One is cleco 6sa10. Could not find a brand on the smaller one. Both need repair or could be used for parts. See pics. PayPal payment within 2 days Shipping is $ 12.65 with usps priority mail Any questions just ask
|
|
Uryu SBH-1A Straight Rivet Gun Hammer 2x Air Pneumatic
Uryu Straight rivet gun Model SBH-1A Not sure if this is a 2x. 3x or 1x Accepts.401 sets. Used in working condition
|
|
2 Ajax Retainer 3300-1 Air Zip Gun Hammer Ball Rivet Spring Quick Change
2 ajax 3300-1 spring quick change retainers. 2.401 shank bits with rectangular cavity and magnet. Model# MXLH1 metra USA Not sure what these are used for.
|
|
HI-SHEAR BP7000 Air-Hydraulic + BG2500 Gun Blind fasteners Installing Kit
HI-SHEAR BP7000 Air-Hydraulic + BG2500 Gun + BK7& BK8 Blind Bolt Blind Rivet Nut fasteners Installing Kit. This set came from military surplus and it is a complete set in good working condition as shown in pictures. The tool kits BK7/ BK8 Came complete with some rigns of rust but nothing serious as shown in pictures. These guns are used to install blind fasteners such as the Blind Bolt. Blind Nut, Hi-Kor Blind Fasteners, and Hi-Sert and Blind-Sert Inserts. The guns are operated by hydraulic pressure supplied from Power Unit BP7000. The gun is designed for operation simplicity and for worker confort. The worker presses three control buttons in a ON, PULL and OFF sequence with his thumb. This rotates the Gun’s mandrel in a clockwise motion, engaging the expander; retracts the mandrel in a counterclockwise motion, releasing the mandrel from ... morethe expander. End-loading by the worker is not required, only nominal effort by one hand to properly position the Gun to the hole. The all-purpose BG2500 Gun installs all sizes(up through 1/2” diameter) of Blind Bolts and Blind Nuts. It is most efficient for Blind Bolts starting in-8(1/4) and Blind Nuts in 8-32 and larger sizes. It can install smalles sizes but with a slower action. Weight: 5.5 lbs For more information about this tool kit please look at: COMBINE SHIPPING. If you want to buy more of our store items please do so and request an invoice before paying as we combine shipping. QUALITY GUARANTEE: We inspect and test all items that come into our shop. However. We deal with a large variety of items and our knowledge of some items is quite limited. Because of this we offer a 48 hour inspection period on all items that we sell. If you happen to find a problem with your item that we missed, please let us know within 48 hours of delivery. We will repair the item or refund your money if there is a problem that we cannot fix. Good customer service is our only goal. Please let us know immediately if there is a problem with your item. International Buyers– Please Note:
|
|
Hi Shear 7/16" Hi Lok Collar Installation Aircraft Tool
This tool works like new. It is made by Hi Shear for the installation of 7/16" Hi Lok collars. The tool has the allen set key built in to the socket.
|
|
Avdel Genesis NG2 71213-00039 Rebuilt Aviation 1/8 3/16 Nail Q Pop Riveter Rivet
Nice rebuilt 1/8 and 3/16 Riveter. Little rough on the outside. But runs great with fresh jaws and quick disconnect bottle and nose equipment. Where the body meets the handle[see photo] there is a small piece of plastic casting missing. This does not effect performance and is fine. 12.50 Shipping USA only.
|
|
INGERSOLL RAND 4X PNEUMATIC AIR HAMMER RIVET GUN RIVETER AIRCRAFT TOOL
INGERSOLL RAND RIVET GUN M/N 4X Looks to be in good physical condition just some minor surface rust as shown in pics. Item was removed from a working environment. But has not been fully tested so as all of our auctions it is being sold as is and all sales are final. BE SURE TO CHECK OUT OUR OTHER AUCTIONS FOR SIMILIAR ITEMS. SHIPPING CAN BE COMBINED. Disclaimer- ALL ITEMS NEW OR USED ARE SOLD AS IS AND ALL SALES ARE FINAL. QUESTIONS? PLEASE CALL 210-566-3300 or text us at 210-273-3394 Check out my other items! Be sure to add me to your favorites list!
|
|
INGERSOLL RAND ATC-3X PNEUMATIC AIR HAMMER RIVET GUN RIVETER AIRCRAFT TOOL
INGERSOLL RAND RIVET GUN ATC-3X Looks to be in good physical condition just some minor surface rust as shown in pics. Item was removed from a working environment. But has not been fully tested so as all of our auctions it is being sold as is and all sales are final. BE SURE TO CHECK OUT OUR OTHER AUCTIONS FOR SIMILIAR ITEMS. SHIPPING CAN BE COMBINED. Disclaimer- ALL ITEMS NEW OR USED ARE SOLD AS IS AND ALL SALES ARE FINAL. QUESTIONS? PLEASE CALL 210-566-3300 or text us at 210-273-3394 Check out my other items! Be sure to add me to your favorites list!
|
|
Cherry Textron G83 Lock Bolt Riveter Aircraft Tool
This tool is in excellent condition. It cycles smoothly and was just serviced. It is made by Cherry Textron. The model is G83. It was designed to pull aircraft lockbolts but can pull blind bolts as well as Cherrymax rivets with an adapter.
|
|
Huck Model 200 Double Action Riveter with Pulling Head Aircraft Tool
This is a nice Huck 200 riveter. It pulls blind bolts as well other fasteners with adapter. It cycles smoothly. It uses standard automatic transmission fluid when servicing the tool. It also comes with a Huck 99-589 nose piece.
|
|
ALCOA Large 9" Pneumatic Rivet Alligator Jaw Squeeze 73087 With stand
Preowned in good working condition. It's mounted on a stand with foot pedal. The stand is 40" tall.
|
|
aircraft tools collor cutters
lot of 22 collor cutters most are new.5/32.3/16.1/4.5/16.
|
|
Emhart Pop Rivet Gun Tool Inline series 5250 Used Made in USA
Used Emhart Inline Riveter Gun Tool 5250. No Hose. Guaranteed to work. I only had 3 Rivets to test it with. Sorry about the dust in photo's. Free Shipping
|
|
Emmet BB4240 Aircraft Quality Rivet Bucking Bar
Emmet BB4240 Aircraft Quality Rivet Bucking Bar Each square on the graph represents 1/4" Bucking bar used to set solid aluminum rivets securely in a variety of positions and locations. This tool has multiple polished surfaces for greater utility when working on vehicles. Trailers, aircraft and sheet metal. Please see photos for accurate description Stored in a smoke free facility I gladly combine shipping. Please make a request after auctions are complete. International buyers-please note Import duties. Taxes, and charges are not included in the item price or shipping costs. These charges are the buyer's responsibility Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Every item sold by us whether NEW. USED, CORE or VINTAGE is sold"as-is" and"condition ... moreunknown" We make every effort to provide an accurate description and condition of the items we list. Any description is for the sole purpose of identifying an item. Our maximum liability is limited to the purchase price of an item paid to us.
|
|
Snap On T664 Aircraft Quality Rivet Bucking Bar
T664 Aircraft Quality Rivet Bucking Bar Each square one the graph paper is 1/4" Bucking bar used to set solid aluminum rivets securely in a variety of positions and locations. This tool has multiple polished surfaces for greater utility when working on vehicles. Trailers, aircraft and sheet metal. Please see photos for accurate description Stored in a smoke free facility I gladly combine shipping. Please make a request after auctions are complete. International buyers-please note Import duties. Taxes, and charges are not included in the item price or shipping costs. These charges are the buyer's responsibility Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Every item sold by us whether NEW. USED, CORE or VINTAGE is sold"as-is" and"condition ... moreunknown" We make every effort to provide an accurate description and condition of the items we list. Any description is for the sole purpose of identifying an item. Our maximum liability is limited to the purchase price of an item paid to us.
|
|
Snap On AT653 Aircraft Quality Rivet Bucking Bar
Snap On AT653 Aircraft Quality Rivet Bucking Bar Each square on the graph is 1/4" Bucking bar used to set solid aluminum rivets securely in a variety of positions and locations. This tool has multiple polished surfaces for greater utility when working on vehicles. Trailers, aircraft and sheet metal. Please see photos for accurate description Stored in a smoke free facility I gladly combine shipping. Please make a request after auctions are complete. International buyers-please note Import duties. Taxes, and charges are not included in the item price or shipping costs. These charges are the buyer's responsibility Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Every item sold by us whether NEW. USED, CORE or VINTAGE is sold"as-is" and"condition ... moreunknown" We make every effort to provide an accurate description and condition of the items we list. Any description is for the sole purpose of identifying an item. Our maximum liability is limited to the purchase price of an item paid to us.
|
|
NA 5 B Aircraft Quality Rivet Bucking Bar
NA 5 B Aircraft Quality Rivet Bucking Bar Each square on the graph represents 1/4" Bucking bar used to set solid aluminum rivets securely in a variety of positions and locations. This tool has multiple polished surfaces for greater utility when working on vehicles. Trailers, aircraft and sheet metal. Please see photos for accurate description Stored in a smoke free facility I gladly combine shipping. Please make a request after auctions are complete. International buyers-please note Import duties. Taxes, and charges are not included in the item price or shipping costs. These charges are the buyer's responsibility Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Every item sold by us whether NEW. USED, CORE or VINTAGE is sold"as-is" and"condition ... moreunknown" We make every effort to provide an accurate description and condition of the items we list. Any description is for the sole purpose of identifying an item. Our maximum liability is limited to the purchase price of an item paid to us.
|
|
High Quality 3 Piece 5/32" Rivet Set War Era
High Quality 3 Piece 5/32" Rivet Set War Era Each item has id marks. 1) AT101A-3-5/32" AN470 2) AT101A-3-5/32" AN470 Class 3 3) SM 21 4705 5-32 UH Please see photos for accurate description Stored in a smoke free facility I gladly combine shipping. Please make a request after auctions are complete. International buyers-please note Import duties. Taxes, and charges are not included in the item price or shipping costs. These charges are the buyer's responsibility Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Every item sold by us whether NEW. USED, CORE or VINTAGE is sold"as-is" and"condition unknown" We make every effort to provide an accurate description and condition of the items we list. Any description is for the sole ... morepurpose of identifying an item. Our maximum liability is limited to the purchase price of an item paid to us.
|
|
A.T.I. AT108A-33PC Rivet Squeezer Kit
| | | | Click to close full size. A.T.I. AT108A-33PC Rivet Squeezer Kit. Make: A.T.I. Tools Model: AT108A-33PC Condition: Used- This item has been used but is still in good condition. This item will have some signs of wear to the exterior(Ex. Light scratches. Scuffs or marks) Auction includes: Squeezer kit case no other accessories included Guarantee: 30 Day satisfaction guarantee. Sales tax must be collected for all Arizona. Kentucky, Indiana, Texas, Tennessee, Illinois, Washington, Nevada, and Florida buyers. We are unable to accept orders from resellers. Store | About Us | Shipping | Payment | Terms of Sale | FAQ 01926 019264167252100100 Jlg Order: 100672 About Us Bid with confidence. World class customer service is always a top priority at Cash America! Cash America Internet Sales. Inc. is an affiliate of Cash America International©, ... morea NYSE company. Affiliates of Cash America have been operating pawnshops and providing specialty financial services for more than 25 years. Cash America affiliates currently have more than 1,000 locations in the United States and Mexico, operating under the brand names Cash America Pawn, SuperPawn, and Cashland. Please browse through and bid on our items with confidence. By listing our items here we hope to enable the buyer to browse a virtual store with merchandise from various states, and let the deals come to you! Our most important policy is customer satisfaction. Please contact us during or after the auction as we will do as much as possible to make sure you are happy. All items will be shipped quickly and professionally. We'd like to make the buying experience as carefree as possible and want your positive feedback. Our goal is to make sure you'd buy from us again and recommend us to friends and/or fellow eBay users. Feel free to email any questions not answered in the listing. Shipping We ship to all fifty states and any country listed in ebay's Global Shipping program. This item will be shipped via USPS Priority or UPS ground for large items. Shipments wi
|
|
2 Excelon NORGREN F72G-3As-001 150Psig 10 Barf Filter Assembly
Up for auction is 2 Excelon Norgren F72G-3AS-001 150PSIG 10 Barf filter assy. These look unused and come with the wall bracket's. Happy bidding! I do combine shipping for US buyers. Buyers using the International Shipping program are not eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! Payment is due within 72 hours end of auction.
|
|
2 Snap On Qdriver 4 for parts
Up for auction is 2 Snap On Qdriver4 for parts. I have no idea the working condition of these, did not test. Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 12 screwdriver's
Up for auction is 12 straight screwdriver's. Maker is Stanley but not limited to. Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 6 awl's
Up for auction is 6 awl's. Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 3 brass hammers
Up for auction is 3 brass hammers. In good used condition! Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14bfc87401e-0xfe-
|
|
Aircraft tools 6 Klein Tools screwdriver's
Up for auction is 6 Klein Tools screwdriver's. Some of these have torn sleeves. Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 4 mallet's (1 rawhide)
Up for auction is 4 mallet's(1 raw is hide) In good used condition! Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 4 ball peen hammers
Up for auction is 4 ball peen hammers. In good used condition! Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 10 1/8" rotary files
Up for auction is 10 1/8" rotary files. In good used condition(1 is new) Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Aircraft tools 10 quick mchuck to 1/4" adaptors
Up for auction is 10 quick chuck to 1/4" adaptor's. In good used condition! Happy bidding! I do combine shipping for US buyers Buyers using the International Shipping Program are not eligible for combined shipping. Payment is due within 72 hours end of auction. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items!
|
|
Snap On gasket scraper # CSA8C
Up for auction is a Snap On gasket scraper# CSA8C. I see no engravings. Happy bidding! I do combine shipping for US buyers. Buyers using the International Shipping program are not eligible for combined shipping I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! Payment is due within 72 hours end of auction.
|
|
Snap On Electrical/Electronic Service Pliers EP409A
Up for auction is a Snap On Electrical/Electronic Service Pliers EP409A. These do not have the"springs" to hold them open. I see no engravings. Happy bidding! I do combine shipping for US buyers. Buyers using the International Shipping program are not eligible for combined shipping I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items! Payment is due within 72 hours end of auction.
|
|
GBP cherry max hand hyd riveter
Gbp 456101 gun comes with 456 pulling head
|
|
!VERY GOOD! CLECO RIVET GUN E4-3WD (3x) !!!
MFG: Cleco Reed Roller Bit Co. Houston, TX! Ø Model: E4-3WD Ø Features: Excellent teasing trigger! Ø Used and in Perfect working condition! Ø Accepts Industry standard.401 shank rivet sets Ø Photos are of actual item Ø In my experience Used Cleco rivet guns are the absolute best on the market. Ø SATISFACTION GUARANTEED! 14 day money back guarantee! Normal 0 false false false EN-US X-NONE X-NONE Ø Normal 0 false false false EN-US X-NONE X-NONE
|
|
aircraft tools bushing holder drill guide
machined idexable bushing holders and bombsites
|
|
Chicago Pneumatic 9" Throat Alligator Squeezer Riveter CP-351
Preowned in good working condition. It has the 9" throat. You will receive the item you see here.
|
|
NIP VINTAGE (1984) CENTRAL FORGE HAND RIVETER KIT STOCK NO 910 -TIAWAN
UP FOR SALE NEW VINTAGE NIP VINTAGE(1984) CENTRAL FORGE HAND RIVETER KIT STOCK NO 910 MADE IN TIAWAN SHIPS WITH A NEW PACK OF 100 PIECES HASTINGS ALUMINUM SLEEVE AND STEM RIVETS(sEE all 7 PICTURES) GOOD LUCK BIDDING( CHECK OUT MY OTHER ITEMS Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Work Shops Threaded Rivet Shop Kit-Vintage
Vintage pre-owned Work Shops Threaded Rivet Kit. Pre-owned but none of the packages have been opened and it has not been used. All original items included(case. Rivets, original instructions& paperwork) Work Shops went out of business in the 1980's so this kit CANNOT be replenished. A blast from the past collectible item. This item cannot be returned so if you have any questions please ask. Shipping to the United States only.
|
|
Huck 2 pneumatic rivet riveter head pulling nose assembly 99-2809CH. Used
These items are used. Item as described in headline. Totally in working condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14c03f62b64-0x10f-
|
|
Air Powered Pnuematic Rivet Buster with chisel bit AS IS
Air Powered Pnuematic Rivet Buster with chisel bit AS IS Up for sale we have an Air Powered Pnuematic Rivet Buster. It comes with a chisel bit. The rivet buster does hammer very well. But the trigger does not seem to function. As soon as you connect air and it will start to hammer. You can simply connect an air shut off valve or fix the trigger issue. Great deal on Ebay. $ave now! Please contact me if you have any questions. Important: Please read below if you intend to bid. By placing a bid on this item you agree to the terms of this auction. Shipping Buyer pays for shipping. Increased shipping charges to Hawaii. Alaska, Puerto Rico, and International shipments. Payment Policy Payment must be made within 7 days from the end of the auction. Accept payments through PayPal. Credit cards, or payment upon pick up. International buyers must pay ... moreby PayPal only. Bank wire transfer is also accepted for National and International sales over $1000.00. CA buyers add 9.5% sales tax. Return Policy Returns will be accepted if there was an error in the description. Unless the item is being sold"AS IS" All sales of items that are sold AS IS will be considered Final. Refunds will be provided if item is returned within 30 days of purchase date in the same condition as received unless stated otherwise in the above description. Refunds never include shipping costs unless stated otherwise in the above description. There will be a 20% restocking fee charged for all refunded items. Check out my other great items now! 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14c066607cb-0x100-
|
|
Zepher Lockfast pnuematic blind fastener installation tool - Aviation/NASCAR
The lockfast pneumatic blind fastener for blind fasteners will simplify your life and make fastener installation a breeze. For Aviation. NASCAR, Serious motorsports or even hard core hot rod or Bonneville guys. Until you've used one of these you don't realize how easy life can be. This gun has extremely low use and runs like a champ. Fasteners not included/gun only. Starting bid at 1/10th the low going rate just to get it moved. Will ship USPS priority mail by weight- Insurance will be provided due to the high dollar value of this item.
|
|
FSI PT-3000 Battery Charger * Special $39 12V
Just in" used" FSI PT-3000 battery charger Super Fast Shipping and Happy Camper Guarantee.100% Period! I offer a 14 day right to return less the costs of shipping. I think that is fair( see images) Paypal due immediately/ NY sales tax required/ International welcome/ Paypal only/ Saturday& Holiday transactions will be completed the next day PLEASE DONT MAKE OFFER UNLESS YOUR ABLE TO PAY WITHIN 24 HOURS
|
|
Chicago Pneumatic 5X Aero Riveter
You are bidding on a Chicago Pneumatic 5X Aero Riveter. Gun has been tested and is in good working condition. Accepts.498" shank rivet sets and attachments.
|
|
Us industrial rivet shaver - long barrel
US industrial rivet shaver- long barrel- works perfect! The best shaver for working around clecos and other obstacles. Has a new mill cutter in it this tool has only been used maybe 6 times since new- save some cash and buy this one over new my loss is your gain thanks
|
|
AVDEL 1/4-20 Rivnut Nutsert Pneumatic Installation Tool
This tool works great. It is made by Avdel for the installation of 1/4-20 rivnuts/ nutserts. The model is 7522. Made in the USA. Sells for over $1200 new.
|
|
SIOUX TOOLS 4X Rivet Gun 270A-4 with Rivet Sets Aircraft Tools
This is a very nice Sioux 4X rivet gun with sets. The Sioux model is 270A-4. It works great. It hits hard but still hasa nice lite trigger. Included in the lot are 11 different rivet sets. Included are 3/32 straight. 1/8" straight, 5/32" straight, 3/16" straight, 1/4" straight, 1/8" offset, 3/16" offset, 5/32" X 5-1/2" long, 3/16" offset X 7" long, 1" flush, 1-3/4" mushroom flush.
|
|
aircraft tools air scribe Chicago pnumatic
chicago pnumatic air scribe works great! model CP9361
|
|
aircraft tools magnavon pancake adaptors
lot of 6 pacake adaptors all spin freely some of them are ground on but work fine offset right and left
|
|
AVDEL 734 Pneumatic Riveting Gun Tool
AVDEL 734 Pneumatic Riveting Gun Tool Please Note The Following: Actual Picture: 1. Fast shipping. 2. If you have any questions regarding this item. Please contact me_before_ bidding. Expedited shipping can be arranged upon request. Other Notes of Interest. S&H: Multiple items purchased will be considered for discounted shipping. Shipments: All items will ship within 1 day of payment receipt. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
|
|