In 
 
Order by: 
Available to: 
Price: 
 - 
$
3,650
Buy It Now
$0 Shipping
Condition: Used
Location: West Hills,CA,USA
Dynasty 200 DX* The DX offers pulse on/off. Pulse frequency, peak% time, background amperage, initial amperage, initial slope time, final slope time and ... morefinal amperage control. Wireless Remote Control Compatible Improve productivity. Eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Learn more Lift-Arc™ Lift-Arc™ starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. AC Waveforms Advance Squarewave provides a fast freezing puddle. Deep penetration, and fast travel speeds. Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action. Sine wave is for customers that like a traditional arc. It is quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds. Blue Lightning™- High Frequency Arc Starter For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity. Auto-Line Power Management Technology Allows for any input voltage hookup(115-460 V) with no manual linking. Providing convenience in any job setting. Ideal solution for dirty or unreliable power. AC and DC TIG Features Extended AC balance(30-99% controls the amount of oxide cleaning(amperage time in EN) which is essential for high quality welds on aluminum. AC frequency(20-250 hz) controls the width of the arc cone and the force of the arc. DC TIG provides exceptionally smooth and precise arc for welding exotic materials. Stick Features(AC/DC) Tailored arc control(DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer. More penetrating 6010. Hot Start™ adaptive control provides positive arc starts without sticking. AC frequency control adds additional stability when Stick welding in AC for s
$
245
6d 1h 37m 10s
0 bids
$150 Shipping
Condition: For parts or not working
Location: South San Francisco,CA,USA
Miller Dynasty DX-300 AC/DC TIG WELDER This item is a complete set. Ready to weld when received. The only thing that doesn't come with it. Is the ... moregas and electrical power source. Miller Dynasty Comes with the following: Flow meter(NEW) Gas Hose( New) Ground cable and clamp(NEW) 17/12ftR Tig Torch(NEW) AK-2 TIG Torch kit(NEW) Foot control(NEW) Specifications Rated Output AC DC Volts 30 28 Amperes 250 200 D uty Cycle 40% 40% Max OCV 90 90 Input Volts 230/460 Hertz60 Phase KW Amperes 1 10.4 62.6/32.2 3 10.5 26.3/17.9. Amperage Range(5-300) Serial Number# KJ096837. Stock Number# 903519-01-1. ANY QUESTIONS ABOUT THE MILLER DYNASTY CALL GARY 216-905-9353)
$
4,195
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
4,195
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
59.99
1d 1h 5m 38s
0 bids
Free Shipping
Condition: Used
Location: New Orleans,LA,USA
$
10,795
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Indianapolis,IN,USA
$
3,299.99
Buy It Now
$78.31 Shipping
Condition: Used
Location: Bryan,TX,USA
Like New Miller Dynasty 200 DX Tig/Stick Welder Serial Number: LF229994 Stock/Model Number 907099-01 Not Included In Sale: No tig torch OR attachement/Plug ... moreincluded(Better finding one to your applcation) No power plug included 115v/230v/400v/460v applicable(Better finding one for your application) No cooler included[some sell with cooler for a"Complete set" Check my listing. Have coolmate 3 115v for sale aswell can sell both together. Send TEXT offers to(716)997-5968 Included In Sale: Unit Itself Miller Dynasty 200 DX Prestine Cosmetic/Mechanical Condition[Model: 907099-01] Ground cable with connector to unit and clasp for your metal- Miller Foot Pedal[Model: RFXS-14HD] Oxweld Type R 6007 661 Regulator and[flowmeter Linde L32] Airco Gauge# 8410091- Unit free shipping NO Warranty. Bid with confidence. you're not getting anymore or any less all sales are final. PLEASE VEIW PICTURES CAREFULLY AND ASK A QUESTION IF YOU HAVE ONE. Dynasty 200 DX* The DX offers pulse on/off. Pulse frequency, peak% time, background amperage, initial amperage, initial slope time, final slope time and final amperage control. Lift-Arc™ starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. Advance Squarewave provides a fast freezing puddle. Deep penetration, and fast travel speeds. Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action. Sine wave is for customers that like a traditional arc. It is quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds. For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity. Allows for any input voltage hookup(115-460 V) with no manual linking. Providing convenience in any job setting. Ideal solution for dirty or unreliable power. Extended AC balance(30-99% controls the amount of oxide cleaning(amperage
$
1,153.88
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
8,595
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
Untitled Document The Miller Dynasty 280 DX Complete Package with Foot Control comes with a whole mess of accessories including a remote Foot Control(part ... morenumber 194744) and a Weldcraft W-280 torch kit(part number 300990) This power packed machine offers full AC features. Including advanced waveforms and wide range of balance and frequency. The 280 DX is a powerful combination of capability and portability. Welding up to 3/8 inch material, the AC/DC TIG and Stick power source is a powerful, energy efficient inverter. Upgradeable and Expandable Front panel memory card data port provides the ability to easily upgrade software and expand product features. Cooler Power Supply(CPS) An integrated 120-volt dedicated-use receptacle to power the Coolmate 1.3. The power switch on the Dynasty also activates the receptacle to help prevent torch failure. Available on select models. Auto-Line Power Management Technology Allows hookup to either single-phase or three-phase electrical input from 208-575 V with no manual linking. Providing convenience in any job setting. An ideal solution for dirty or unreliable input power. Portable with adjustable shoulder strap Weighing in at just 52 pounds. The Dynasty 280 is extremely portable and easy to transport featuring dual carry handles and a carrying strap. Pro-Set Feature(professional settings) This feature eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed. Convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse and DIG parameters. Stick Features(AC/DC) Tailored arc control(DIG) allows the arc characteristic to be changed for specific applications and electrodes. Smooth running 7018 or stiffer. More penetrating 6010. Hot Start adaptive control provides positive arc starts without sticking. Stick-Stuck detects if the electrode is stuck to the part and turns the welding output off to safely and easily re
$
6,195
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
Untitled Document The Miller Dynasty 280 DX TIG Welder offers full AC features. Including advanced waveforms and wide range of balance and frequency. ... moreThe 280 DX is a powerful combination of capability and portability. Welding up to 3/8 inch material, the AC/DC TIG and Stick power source is a powerful, energy efficient inverter. Upgradeable and Expandable Front panel memory card data port provides the ability to easily upgrade software and expand product features. Auto-Line Power Management Technology Allows hookup to either single-phase or three-phase electrical input from 208-575 V with no manual linking. Providing convenience in any job setting. An ideal solution for dirty or unreliable input power. Portable with adjustable shoulder strap Weighing in at just 52 pounds. The Dynasty 280 is extremely portable and easy to transport featuring dual carry handles and a carrying strap. Pro-Set Feature(professional settings) This feature eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed. Convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse and DIG parameters. Stick Features(AC/DC) Tailored arc control(DIG) allows the arc characteristic to be changed for specific applications and electrodes. Smooth running 7018 or stiffer. More penetrating 6010. Hot Start adaptive control provides positive arc starts without sticking. Stick-Stuck detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode. Menu selectable. Comes complete with: Dynasty 280 DX power source• Quick Reference Guide: English• Adjustable shoulder strap• 8 ft(2.4m) Primary cord• 2) Dinse 50 mm connectors FREE GROUND SHIPPING TO ANY OF THE CONTINENTAL 48 STATES. Comes with full 3 year factory warranty. You can call 866-854-7380 FROM 8AM to 6pm Eastern Time(EST) Monday- Friday with any questions. PayPal: Paypal
$
335.99
17h 29m 12s
0 bids
$74.99 Shipping
Condition: New
Location: Canada
$
7,500
Buy It Now
$0 Shipping
Condition: Used
Location: Deltona,FL,USA
$
12,345
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Elkhart Lake,WI,USA
All products are brand new. Not rebuilt,not reconditioned and carry a full manufactures warranty. Unless otherwise specified. We are an AUTHORIZED MILLER- ... moreHOBART- DISTRIBUTOR. We have been serving the welding industry for over 26 years. So buy with confidence! B& R Welding Supplies is family owned and operated. You can speak with a real person at any time for help in the application processes. Miller Dynasty 200 DX Part# 907099011 BRAND NEW FREE SHIPPING IN THE 48 STATES MACHINE ONLY Maximum flexibility- Miller Electric combines advanced inverter technology with Auto-Line technology offering the most flexible AC/DC TIG Stick power supply in the welding industry. Features: BLUE LIGHTNING TECHNOLOGY Advanced Squarewave arc for improved weldability on aluminum and magnesium using low power. Continuous high-frequency is not needed because of the advanced Squarewave arc. And extended balance control allows you to fine tune the duration of the electrode negative portion of the cycle from 30 to 90% This provides precise cleaning control and prolonged tungsten life. AC frequency control range of 20- 250 Hz. provides control for a focused arc. Resulting in better directional control to help produce desired arc/weld bead characteristics. Built-in pulser reduces heat input; adds arc stabiility(DX model only) Fan-On-Demand cooling system only operates when needed. Auto-Line provides state-of-the-art flexibility by automatically connecting to 120- 460 VAC. Single or three phase power without removing the covers to relink the power source. Portable in the shop or at the job site- at 45 lb the unit is easily moved from location to location. Superior TIG/Stick arc performance on all input voltages. Even on the difficult-to-run electrodes like E6010. Low OCV Stick is a simple design that reduces open-circuit voltage to 13 volts when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers. Inverter-based. AC/DC power source has state-of-the-art operator interface a
$
931.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
5,321
Buy It Now
$0 Shipping
Condition: Used
Location: Burbank,CA,USA
Miller Dynasty 200 DX Series. Part# 951174 AC DC TIG STICK WELDER PART# 907099011 Includes the Contractor Kit 195054 w/Foot Control BRAND NEW FREE SHIPPING ... moreIN THE 48 STATES Maximum flexibility- Miller Electric combines advanced inverter technology with Auto-Line technology offering the most flexible AC/DC TIG Stick power supply in the welding industry. Features: BLUE LIGHTNING TECHNOLOGY Advanced Squarewave arc for improved weldability on aluminum and magnesium using low power. Continuous high-frequency is not needed because of the advanced Squarewave arc. And extended balance control allows you to fine tune the duration of the electrode negative portion of the cycle from 30 to 90% This provides precise cleaning control and prolonged tungsten life. AC frequency control range of 20- 250 Hz. provides control for a focused arc. Resulting in better directional control to help produce desired arc/weld bead characteristics. Built-in pulser reduces heat input; adds arc stabiility(DX model only) Fan-On-Demand cooling system only operates when needed. Auto-Line provides state-of-the-art flexibility by automatically connecting to 120- 460 VAC. Single or three phase power without removing the covers to relink the power source. Portable in the shop or at the job site- at 45 lb the unit is easily moved from location to location. Superior TIG/Stick arc performance on all input voltages. Even on the difficult-to-run electrodes like E6010. Low OCV Stick is a simple design that reduces open-circuit voltage to 13 volts when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers. Inverter-based. AC/DC power source has state-of-the-art operator interface allowing the user extra set-up capabilities in a compact machine. Features more precise control of output parameters. HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination. Lift-Arc start provides TIG arc starting without use of high frequency. Programmable HF start paramete
$
6,375
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
14,500
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Elkhart Lake,WI,USA
$
12,345
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Elkhart Lake,WI,USA
$
6,625
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
Processes AC/DC TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications Industrial Applications, Precision Fabrication, Heavy Fabrication, Pipe and Tube ... moreFabrication, Aerospace, Aluminum Ship Repair, Anodized Aluminum Fabrication Features Built-in pulser reduces heat input; adds arc stability. Upgradeable and expandable. Front panel memory card data port provides the ability to easily upgrade software and expand product features. Pro-Set™ feature(professional settings) eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed. Convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse, and DIG parameters. Sleep timer conserves electricity. This programmable feature will power down the machine if it sits idle for a specific time. Auto-Line™ provides state-of-the-art flexibility by automatically connecting to 208-575 VAC. Single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site. Cooler Power Supply(CPS) An integrated 120-volt dedicated-use receptacle to power the Coolmate™ 1.3. The power switch on the Dynasty also activates the receptacle to help prevent torch failure. Lift-Arc™ starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. Blue Lightning™ high-frequency arc starter for non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set and increases productivity, Meter calibration. Digital meters can be calibrated to a standard device for certification. Wind Tunnel Technology™ protects internal electrical components from airborne contaminates. Extending the product life. Fan-On-Demand™ power source cooling system operates only when needed. Reducing noise, energy use and the amount of contaminates pulled th
$
6,190
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
4,575
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
9,250
Buy It Now
Free Shipping
Condition: Used
Location: Longmont,CO,USA
SquareTrade © AP6.0 Untitled Document BRAND NEW MILLER DYNASTY TIG TIG WELDER AC/DC 951404 WITH REMOTE FOOT CONTROL- This welder is ordered from ... moreMiller at time it is purchased here. We usually have to ship in 4-7 business days. PKG.DYNASTY 700 WIRELESS FOOT CONTROL COMPLETE, 951404, list price$17294.00, Includes: 2 Thread Lock Adapter 225029. 1 WC Torch Adapter 225028, Set-up DVD. Runner Cart, Coolmate 3.5, Wireless Remote Foot Control, 400A 25ft Torch Kit and Accys 300186, WC Torch Adapter 225028, Reg/Flow Mtr, Gas Hose, 12ft Work Clamp with Thread Lock Conn and 4 gal of Coolant 043810. The Dynasty 700 is a powerful. Compact power source capable of welding up to 1" aluminum. Total arc control provides maximum productivity and weld quality while conserving energy compared to traditional welding machines. For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity. Processes TIG(GTAW) Stick(SMAW) Pulsed TIG(GTAW-P) Material Type Mild Steel, Min 22 ga(0.9 mm) Max 14 ga(1.9 mm) Mild Steel, Min 22 ga(0.9 mm) Max 14 ga(1.9 mm) General specifications Input Power, Requires 3- or 1-Phase Power Rated Output, 500 A at 40 V. 100% Duty Cycle(3-Phase) 450 A at 38 V. 60% Duty Cycle(1-Phase) Welding Amperage Range, 5-700 A; Auto-Line- 208–575 V(±10% 1- or 3-Phase Net Weight, 198 lb(90 kg) Applications Aviation, Fabrication, Field Maintenance and Repair, Manufacturing, Pipe Fabrication, Product Literature Warranty With the best coverage in the industry. Delivers unparalleled peace-of-mind. FREE GROUND Truck SHIPPING TO ANY OF THE CONTINENTAL 48 STATES. Please supply a good daytime phone number when purchased. This ships via Common Carrier. Thry require the phone number, and buyer must unload from truck when delivered. We do not furnish liftgate deliveries. CLICK ON THIS LINK FOR MANY TIG ACCESSORIES AND CONSUMABLES IN OUR EBAY STORE. PayPal: Paypal is preferred payment method. Credit
$
2,450
Buy It Now
$0 Shipping
Condition: Used
Location: Mission,TX,USA
$
2,750
Buy It Now
Free Shipping
Condition: Used
Location: Alexander,NC,USA
$
8,395
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
8,995
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
Untitled Document The Miller Dynasty 280 DX Complete Package with Wireless Foot Control comes with the Coolmate 1.3. 4 one gallon bottles of coolant, ... morea small runner cart, a Wireless Foot Control(part number 300429) and a Weldcraft W-280 torch kit(part number 300990) This power packed machine offers full AC features, including advanced waveforms and wide range of balance and frequency. The 280 DX is a powerful combination of capability and portability. Welding up to 3/8 inch material, the AC/DC TIG and Stick power source is a powerful, energy efficient inverter. Upgradeable and Expandable Front panel memory card data port provides the ability to easily upgrade software and expand product features. Cooler Power Supply(CPS) An integrated 120-volt dedicated-use receptacle to power the Coolmate 1.3. The power switch on the Dynasty also activates the receptacle to help prevent torch failure. Available on select models. Auto-Line Power Management Technology Allows hookup to either single-phase or three-phase electrical input from 208-575 V with no manual linking. Providing convenience in any job setting. An ideal solution for dirty or unreliable input power. Portable with adjustable shoulder strap Weighing in at just 52 pounds. The Dynasty 280 is extremely portable and easy to transport featuring dual carry handles and a carrying strap. Pro-Set Feature(professional settings) This feature eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed. Convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse and DIG parameters. Stick Features(AC/DC) Tailored arc control(DIG) allows the arc characteristic to be changed for specific applications and electrodes. Smooth running 7018 or stiffer. More penetrating 6010. Hot Start adaptive control provides positive arc starts without sticking. Stick-Stuck detects if the electrode is stuck to the part and turns t
$
8,822.52
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
12,095
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
6,028.64
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
4,410
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
4,884.37
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
21,847.82
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
13,851.88
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
5,100
Buy It Now
$0 Shipping
Condition: New
Location: Minooka,IL,USA
$
12,537.38
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
450
Buy It Now
Free Shipping
Condition: Used
Location: Stratford,WI,USA
$
250.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
Call Us Today! 1.866.218.8440. Store Search include description Store Categories» $209.99 $174.95 Premium Quality HTP Flex Head 20 series water cooled ... moreTig Torch designed to fit Miller welders with the 5/8-18 RH Female gas fittings and a ½” twist lock dinse connector. Some examples of this would be a Miller Dynasty 200. Dynasty 300, Dynasty 350, Syncrowave 250DX, and Syncrowave 350LX. This is a complete torch package which includes our water-cooled dinse connector equivalent to Miller p/n 195 377(you will pay $45 for this connector alone! a leather outer cover(another $25 option) our tool-less connection torch head, and super flexible color coded cables. Once you weld with these super flexible cables you will never go back to a conventional tig torch again. We will put this torch against a Weldcraft WP-20 any day. The torch is made in the USA, 25 feet long, and has a 100% duty cycle at 250 amps. Features: Premium Quality HTP Flex Head 20 Series Water Cooled Tig Torch, Designed To Fit Miller Welders with the 5/8-18 RH Female gas fittings and a ½” twist lock dinse connector, Some examples of this would be a Miller Dynasty 200. Dynasty 300, Dynasty 350, Syncrowave 250DX, and Syncrowave 350LX, Once you weld with these super flexible cables you will never go back to a conventional tig torch again, We will put this torch against a Weldcraft WP-20 any day, The torch is made in the USA, 25 feet In Length, 100% duty cycle at 250 amps, This is the same high quality tig torch which is used on the HTP Invertig 221(our version of a Dynasty 200) which has a 90 day moneyback guarantee. This Is A Complete Torch Package Including: Water-Cooled Dinse Connector Equivalent To Miller p/n 195 377(you will pay $45 for this connector alone! A Long Back Cap As Pictured, A Leather Outer Cover(another $25 option) Our Tool-Less Connection Torch Head, Super Flexible Color Coded Cables, Collets. Collet bodies and alumina cups are not included and should be purchased separately. PayPal: We only accept payme
$
599.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Rogersville,MO,USA
$
6,395
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
6,435
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
6,595
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
1,250
Buy It Now
$0 Shipping
Condition: New
Location: Golden,CO,USA
$
1,210
Buy It Now
$28 Shipping
Condition: New
Location: Santa Ana,CA,USA
$
695
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
498
Buy It Now
Free Shipping
Condition: New
Location: Westfield,NC,USA
$
49.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
F or sale is a Tig Torch Adapter that will allow you to connect any 17 seri es or 9 series Tig torch with a one piece ca ble assembly to a welder that ... morehas a 1/ 2" di n s e connecto r and a 5/8-18 RH male gas connection. The dinse connector has a 3/8-24 RH female connection to accept the standard one piece power cable that is standard on 9 and 17 series torches. This is equivalent to Miller's p/n 195378. This patented design clam shell makes installation a breeze compared to the OEM. This will fit the following welder s: Miller Dynasty 200. Dynasty 300, Dynasty 35 0. Maxstar 152, 200, 300, 350, Sync row ave 250DX. 350DX, XMT 30 4. 350 Buy in confidence from HTP America. Inc. your total welding specialist since 1981, where for over 30 years all we have sold are quality welding supplies at affordable prices. Call us at 1-800-USA-WELD(800-872-9353) or send an e-mail if you have any questions on this product. Q5G-150
$
138.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
$
159
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
REMOTE FOOT CONTROL FOR MILLER 14 PIN POWER SUPPLIES REPLACES RFCS14- P/N 043554 OR 194744 A new high quality heavy duty foot control for use with any ... morecurrent Miller power supply using a 14 pin amphenol connection- Syncrowave. Dynasty 200/350/700, Maxstar, 200/350/700, Trailblazer etc. Direct replacement for the Miller 043554/194744. Pedal is 16 gauge steel. Powder coated metal construction, cord has a heavy duty metal amphenol connector. 25' cord with strain relief. Non slip traction pad. Made in the USA to ISO9001 quality standards. One year warranty. Size is 8.8"L x 5.5" W x 4" high. Sutton-Garten is a 96 year old welding supply distributor. Email or call 800-686-4674 with any technical questions. Email for reasonable shipping rates to international addresses.
$
155.99
Buy It Now
$0 Shipping
Condition: New
Location: Saylorsburg,PA,USA
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! For Sale is a premium quality HTP 20 series water cooled Tig Torch designed to fit Miller welders with the 5/8-18 RH Female gas fittings and a ½” twist lock dinse connector. Some examples of this would be a Miller Dynasty 200. Dynasty 300, Dynasty 350, Syncrowave 250DX, and Syncrowave 350LX. This is a complete torch package which includes our water-cooled dinse connector equivalent to Miller p/n 195 377(you will pay $45 for this connector alone! A leather outer cover(another $25 option) our tool-less torch head, and super flexible color coded cables. Once you weld with these super flexible cables you will never go back to a conventional tig torch again. We will put this torch against a Weldcraft WP-20 any day. The torch is made in the USA. 25 feet long, and has a 100% duty cycle at 250 amps. This is the same high quality tig torch which is used on the HTP Invertig 221(our version of a Dynasty 200) which has a 90 day moneyback guarantee- we would not put a low quality tig torch on an expensive tig welder with a moneyback guarantee. The torch includes a long back cap as pictured. Collets. Collet bodies and alumina cups are to be purchased separately. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shippi
$
225.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! For Sale is a premium quality HTP 20 series water cooled Tig Torch designed to fit Miller welders with the 5/8-18 RH Female gas fittings and a ½” twist lock dinse connector. Some examples of this would be a Miller Dynasty 200. Dynasty 300, Dynasty 350, Syncrowave 250DX, and Syncrowave 350LX. This is a complete torch package which includes our water-cooled dinse connector equivalent to Miller p/n 195 377(you will pay $45 for this connector alone! A leather outer cover(another $25 option) our tool-less torch head, and super flexible color coded cables. Once you weld with these super flexible cables you will never go back to a conventional tig torch again. We will put this torch against a Weldcraft WP-20 any day. The torch is made in the USA. 25 feet long, and has a 100% duty cycle at 250 amps. This is the same high quality tig torch which is used on the HTP Invertig 221(our version of a Dynasty 200) which has a 90 day moneyback guarantee- we would not put a low quality tig torch on an expensive tig welder with a moneyback guarantee. The torch includes a long back cap as pictured. Collets. Collet bodies and alumina cups are to be purchased separately. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shippi
$
248.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
If you want a shipping discount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments ... morefor each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new American Made Tig Welding Torch. This is an HTP 9 series swivel head tig torch and will plug right in to the Miller Dynasty 200 series welders. Dynasty 300 series welders, Syncrowave 250 DX, Syncrowave 350 LX, Maxstar 152, Maxstar 200, and Maxstar 300 series welders and any other Miller Tig Welder which has a 1/2" twist lock connector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder. The swivel head torch has a head than can be rotated 360 degrees to get into tight places. It is great for working on roll cages or exhaust headers. A 9 series torch is the standard torch found on many tig welders. The super flexible one piece cable assembly is 12 1/2 feet long. This is a 125 amp 100% duty cycle torch. This 9 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the connection. The diameter of the connector is 1/2" and the gas flows through the 5/8-18 male fitting. This includes our version of Millers p/n 195 378 air cooled torch adapter- this part alone will cost $45.00 and we include it on this torch for no additional charge. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on s
$
1,215
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
This is a non-stock item. Please allow 2-3 days for us to ship. Please see spec sheet pictures for full details. Free Shipping to the lower 48 states.
$
995
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
SquareTrade © AP6.0 Untitled Document MILLER 300430 WIRELESS HAND CONTROL Does not work with all Miller Welders Completely Cordless Design. There's ... moreno need to buy a new Miller welder to take advantage of this new technology. Simply plug the wireless receiver into your 14-pin receptacle on the front of your Miller welder and you're ready to go wireless! Completely Cordless Design Eliminates Costly Cord Failures Improves Weld Quality with Precise Operator Control Eliminates Cord Tangles Belt Clip Keeps Your Remote Secure& Accessible Extends Welding Range to 300 ft Increases Productivity Remote Digital Display Robust& Reliable Design Improves Safety Long Battery Life Easy to Use Recommended For Use With Maxstar® 200* 350/700 Dynasty® Series Gold Star® Series CST™ 280 XMT® Series Dimension™ Series CST™ 280 Rack XMT® 304 and 350 Rack* Trailblazer® Series Big Blue® 300 Pro Miller Du-Op® Big Blue® 350 PipePro™ Big Blue® 400 Eco Pro*Excludes Maxstar ®200 STR*Excludes XMT ®350 VS FREE GROUND SHIPPING TO ANY OF THE CONTINENTAL 48 STATES. You can call me at 866-854-7380 8AM to 9PM Eastern Time(EST) 7 DAYS A WEEK. PayPal: Paypal is preferred payment method. Credit Cards: Now right here in checkout. Select Credit Card Option and enter information exactly as on credit card statement and card. You may change ship to address during check-out. Call 866-854-7380, 8AM to 9PM Eastern Time(EST) 7 days a week with questions or concerns We expect payment within 3 days of purchase. We must charge sales tax as follows; Indiana(7% Ohio(6.5% Illinois(6.25% and Michigan(6% WE USUALLY SHIP THE NEXT BUSINESS DAY AFTER PAYMENT RECEIVED. SAME DAY IN SOME CASES. UPS SENDS TRACKING INFORMATION TO YOUR EMAIL ADDRESS USED FOR SALE. TRUCK TRACKING INFO SENT IN SEPARATE EMAIL. FREE GROUND SHIPPING TO ANY OF THE CONTINENTAL 48 STATES. All items are covered by Manufacturer warranties. We will help you with any warranty issues. Small items shipped by Economy mail. With Prio
$
57.99
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
6,690
Buy It Now
$0 Shipping
Condition: New
Location: Minooka,IL,USA
$
17.95
Buy It Now
$0 Shipping
Condition: New
Location: Stafford Springs,CT,USA
$
114.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
$
270.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
$
133.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
If you want a shipping discount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments ... morefor each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new American Made Tig Welding Torch. This is a 17 series tig torch and will plug right in to the Miller Dynasty 200 series welders. Dynasty 300 series welders, Syncrowave 250 DX, Syncrowave 350 LX, Maxstar 152, Maxstar 200, and Maxstar 300 series welders and any other Miller Tig Welder which has a 1/2" twist lock connector and has a 5/8-18 RH gas connection and a solenoid valve built into the welder. Common brand names/designations are WP-17(Weldcraft) PTA-17(Lincoln) DB-17(Miller Diamond back) This is an extremely high quality tig welding torch which features a one piece power cable design. The power cable is made from silicone rubber with a nylon braided weave overlay which means it is extremely flexible- and it will stay flexible in cold weather! This design puts much less strain on your wrist and makes the torch feel lighter. We will put this torch against any of the above mentioned torches in both quality and performance. A 17 series torch is the standard torch found on many tig welders. It uses 10N series Alumina Cups which are about 1 7/8" long. The super flexible one piece cable assembly is 121/2 feet long. This is a 150 amp 100% duty cycle torch. This 17 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the connection. The diameter of the connector is 1
$
389.99
Buy It Now
Free Shipping
Condition: Used
Location: Westland,MI,USA
1 2 3 4 5
 In 

Past Items  
 
I have for sale Miller's top of the line Dynasty 200DX tig/stick welder. This machine has everything you need to get welding besides your argon tank. I hate to part with this machine but I have a new baby girl! With that said back to the machine. This machine will weld virtually any weldable material including aluminum with its added AC function. Honestly this machine has every possible added function such as pulse. Spot, dig, fully adjustable slope settings, down to what size tungsten you are using and many more. I am the original owner of this machine, it has been moved around from place to place more than it has been used. The machine only has 23hr 27 minutes on it(so it is basically new) there are some cosmetic blemishes none of which affect the machine's operation. All buttons and knob and display are in perfect condition. It ... morecomes like new 13 foot ground hi-vis heavy 4 gauge Jackson ground lead, 13 foot hi-vis heavy 4 gauge stick stinger lead, 25 foot ultra flex CK Worldwide air cooled tig torch, Miller RHC-14 hand control for tig and stick amperage adjustment, HTP argon flow meter, and owners manual for the machine. I have also added some quick change 115 and 230 volt jumper so you can change back and forth in second with out having to rewire. This is a great machine for someone who needs a portable, reliable, powerhouse for the job or home shop. I am located in Sparta Tn if you would like to try it out. If you have any questions please ask. Here is Miller's specs on the machine: BLUE LIGHTNING TECHNOLOGY• Advanced Squarewave arc for improved weldability on aluminum and magnesium using low power. Continuous high-frequency is not needed because of the advanced Squarewave arc. And extended balance control allows you to fine tune the duration of the electrode negative portion of the cycle from 30 to 90% This provides precise cleaning control and prolonged tungsten life. AC frequency control range of 20- 250 Hz. provides control for a focused arc. Resulting in better directional control to help pro
Miller Dynasty 350. Machine Only Miller Part Number 907 204 Serial Number MA460348L Auto-Line models allows for any input voltage hook-up with no manual linking. Providing convenience at any job site. Includes features such as Lift-Arc. And Hot Start, 120V auxiliary power receptacle for water cooling systems or small tools, and program memory that allows up to nine program saves for your parameter settings. This is a factory reconditioned unit that comes with the machine. Power cord(no plug) dinse connectors, and set-up DVD This welder carries a two year factory warranty. We offer a discount on the shipping. Just e-mail us your zip code and indicate whether there is a forklift available to unload this machine. We are a welding supply company in Phoenix. AZ and have been selling new/ used welders and all of your welding supply needs for over ... more45 years. If you have any questions on this or any other welder. Just give us a call Jodi 602 252-0341 or 602 396-1178 John 602 206-0571
This is my pride and joy here. Very well kept. I'm sure you all are aware and how cool all the features are on the Dynasty 200DX. That's why you're looking at this. I'm just going to give you a list of what is included, and a description of the condition. The condition on the unit is a 9.9 out of 10. The condition on the torch and pedal are a 7 or 8 out of 10. The pedal cord has a splice in it that does not affect the functionality at all. I forgot to get pictures of the contractor kit and case. That will be included. Everything that is in the contractors kit that you don't see in the pictures is still in the case and is in brand new condition. And will be included as well. Beside that. The tank and custom made stainless steel cart and welding wire that you see in the pictures will all be included. I also have a bunch ... moreof cases of tungsten which will be included. Local Pickup or Buyer to arrange shipping. California Buyers will be charged 8% sales tax.
Miller Dynasty 350 Autoline. Purchased new in July 2012. Comes with 25' 300 amp CK Worldwide Flex Head water cooled torch. Foot pedal. Work cable and clamp. Water cooler. This machine has about 1 hour use. The cart setup is absolutely stable with not tipping problems. I made sure of this when I put together as I would not risk this expensive welder falling over. The gas bottle. Regulator, and remote wireless foot control are not included in sale* This machine is in like new. Excellent condition. Selling due to it being a lot more than I need for my shop. Will probably purchase a Dynasty 200 in its place. Please call me at 9103089234 if you have any questions.
LARGE ART BOOK THE BLOOD OF KINGS DYNASTY& RITUAL IN MAYA ART SCHELE MILLER 334 PAGES GOOD USED CONDITION LOTS OF PICTURES& BACKGROUND FAB ITEM COMBINED SHIPPING DISCOUNT WHERE POSSIBLE
Miller Dynasty 350 TigRunner package with 3.5 gallon built in water cooler- 350amp AC/DC GTAW(Tig) Welder. 57hrs of arc time on it. Brand new in 2010. Manufactured in 2008. Includes the following: 25FT CK230 Flex Head 300amp Tig Torch/ 500 Amp Lenco LPG-500 ground clamp/ 13' of ground cable/ Victor HRK-1425-580 Flowmeter/ 25' of 3 phase power cable/ 30' CK Worldwide Linear"Amptrack" thumb amperage control/ Foot Pedal(wired) Cart. Item will ship as freight on pallet. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e9bd287c7-0x101-
Miller Dynasty 350 TIGRunner Package(Auto-Line 208-575V) Miller Part Number 907 204 001 Serial Number MC480620L Reconditioned with 22 hours metered. Auto-Line models allows for any input voltage hook-up with no manual linking. Providing convenience at any job site. Includes features such as Lift-Arc. And Hot Start Stick capabilities, 120V auxiliary power receptacle for water cooling systems or small tools, and program memory that allows up to nine program saves for your parameter settings. AC and DC TIG features include pulse control and independent amperage control. This is a factory reconditioned unit that comes with the power source. 8ft. primary cord, Coolmate 3.5, and single cylinder cart. Owner's Manual or Set-up DVD available upon request. We have other accessories available for this machine. Please contact us for pricing! This ... morewelder carries a two year factory warranty. We offer a discount on the shipping. Just e-mail us your zip code and indicate whether there is a forklift available to unload this machine. We are a welding supply company in Phoenix. AZ and have been selling new/ used welders and all of your welding supply needs for over 45 years. If you have any questions on this or any other welder. Just give us a call Jodi 602 252-0341 or 602 396-1178 John 602 206-0571
Miller Dynasty 200DX tig welder with cooler and cart. Used for one job and don't need it anymore. Comes with torches. Hoses and gauge. No foot pedal or coolant. Still in excellent condition.
Complete Package includes; Dynasty 350 Inverter Power Source 230/575 Volt with Auto-Line feature. Single or Three phase 5-350 amp output. Low amp draw since its an inverter. Built in watercooler. Welcraft 250 Amp Tig Torch Foot Control, Cart with Single Cylinder Rack Foot Pedal Holder Cable and Torch Holder. Smith Regulator/Flowmeter and hose. Ground and cable with Quick connector. Input plug is not included. Machine has a LH serial number 5/14/2007 manf. date. Its in good shape and welds great. Smooth inverter arc. Electrode Holder and cable with quick connector required for stick function. This machine has functions such as pulse, frequency control and arc balance to control the arc. Professional machine for presice AC and DC TIG Welds. List on a new machine is $9,363.00
THIS IS A WORKING MILLER DYNASTY 350 GOOD CONDITION# Shipping on this item is 350.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is ... morea item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item.
Dynasty 200 DX* The DX offers pulse on/off. Pulse frequency, peak% time, background amperage, initial amperage, initial slope time, final slope time and final amperage control. Wireless Remote Control Compatible Improve productivity. Eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Learn more Lift-Arc™ Lift-Arc™ starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. AC Waveforms Advance Squarewave provides a fast freezing puddle. Deep penetration, and fast travel speeds. Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action. Sine wave is for customers that like a traditional arc. It is quiet with good wetting. Triangular ... morewave reduces the heat input and is good on thin aluminum. It provides fast travel speeds. Blue Lightning™- High Frequency Arc Starter For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity. Auto-Line Power Management Technology Allows for any input voltage hookup(115-460 V) with no manual linking. Providing convenience in any job setting. Ideal solution for dirty or unreliable power. AC and DC TIG Features Extended AC balance(30-99% controls the amount of oxide cleaning(amperage time in EN) which is essential for high quality welds on aluminum. AC frequency(20-250 hz) controls the width of the arc cone and the force of the arc. DC TIG provides exceptionally smooth and precise arc for welding exotic materials. Stick Features(AC/DC) Tailored arc control(DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer. More penetrating 6010. Hot Start™ adaptive control provides positive arc starts without sticking. AC frequency control adds additional stability when Stick welding in AC for s
Description This regulator is in perfect working order. It has some cosmetic signs of use. Comes with the hose that connects to Miller Dynasty welders. Check my other listings for the torch and other accessories. Payment I accept Visa. MasterCard, American Express, and Discover through PayPal or personal checks. I DO NOT ACCEPT international cashier's checks, company checks nor do I accept credit card payments over the phone. Please note, PayPal's buyer and seller protection policies require that I ship to the confirmed address used at the time a payment is made. Shipping Smaller items will be shipped via USPS Priority Mail while larger items will be shipped via USPS Parcel Post. I reserve a right to refuse to ship to certain destinations. Such as Afghanistan, Nigeria, etc. even if listing does not specifically excludes these countries. ... moreAlso. EBay shipping calculator shows approximate shipping amount. Once your item is packed and weighted, I will put actual shipping cost on your invoice. If it turns out(and has happened many times in the past) that shipping charges are higher than estimated, buyer is expected to pay the difference. I will provide a proof of how much I paid. Terms of Sale Unless otherwise noted. All sales are final. No return or exchanges, unless the item is significantly different from listing description. Buyer is encouraged to buy insurance. I cannot be help liable for damage during shipping. If you have a question about the item, please ask it before bidding or buying. I return messages promptly. Do not assume anything! About Us I trade on eBay since 2002 and respect eBay community. Rules and regulations. I enjoy doing business with people and sold my items all over the world. I hope you will have a pleasant experience buying from and selling to me. If you are unhappy about the transaction, I encourage you to E-mail me and I will do my best to resolve the issue. Contact Us
I am selling my Miller Dynasty 200 DX AC/DC TIG welder with the Foot Control Contractor Kit Pkg(air cooled) I purchased this welder roughly 6 years ago new at Atlas welding supply in Berkeley CA. The Serial No. LH011462L indicates it was made before 2008 and they have made a couple of changes to the model. I have only used it a couple of times at home totaling 1 hour and 26 minutes with 234 arc strikes. These are recorded in the machines hour meter. It worked perfectly when last used. The machine looks as new and most components are in nearly new condition. Includes all that is in the photos- I believe everything in the miller kit is there but will not promise anything other than what is in the photos. I may amend this but I do not currently have the manuals to send with it. I moved and they are filed somewhere. The manuals are readily available ... moreto download from Miller This is a very nice welder. This Please contact me with any questions before buying.
You are bidding on a like new and great working Miller Dynasty 200SD 907099 AC/DC Tig Stick Welder Pkg with Regulator and Extras. Its had maybe a days usage. Welder works on 115/230/460v and 1/3 phase. Has auto line and detects what's its plugged in to. The 100% Argon bottle is empty and will only come with the package if picked up locally(it can't be shipped) Item is for sale locally and I reserve the right to end the listing if it sells. Please any and all questions prior to bidding. Happy Bidding! Due to Ebay now charging the seller fees on shipping it will cost a little extra with insurance about $100 with welder and all extras and will ship Via FedEx Ground. Payment is due within 3 days of auction end less then 5 positive feedback buyers must contact me first or bid may be cancelled! PROCESSES TIG(GTAW) DC, TIG(GTAW) AC, Pulsed ... moreTIG(GTAW-P) AC- Not available on SD model, Pulsed TIG(GTAW-P) DC- Not available on SD model, Stick(SMAW) DC, Stick(SMAW) AC, Air Carbon Arc Cutting and Gouging(CAC-A) MATERIAL TYPE Max 1/4 in(6.4 mm) Steel, Min 0.004 in(0.1 mm) Max 1/4 in(6.4 mm) Aluminum, Min 0.020 in(0.5 mm) GENERAL SPECIFICATIONS Input Power, 3- or 1-Phase Power, Rated Output, 200 A at 18 V. 20% Duty Cycle. 150 A at 16 V. 60% Duty Cycle 140 A at 15.6 V. 40% Duty Cycle 100 A at 14 V. 100% Duty Cycle. Stick 200 A at 28 V. 20% Duty Cycle 130 A at 25.2 V. 60% Duty Cycle 100 A at 24 V. 60% Duty Cycle 90 A at 23.6 V. 100% Duty Cycle. Welding Amperage Range, 1-200 Amps(1-150 on 120 VAC) Net Weight, 45 lb(20.5 kg) Hours 6hrs. 14min Arc Starts 1.871
Description TIG torch for the use with Miller Dynasty Welders. Comes with the ground wire/clamp. Stick adapter/wire, argon hose(not shown) and Miller adapter. Complete kit! The top part of the torch is bendable to your liking. Ground clamp is small and made of brass/copper alloy. All items show signs of use. But they are in excellent working condition. They have been used at home on small projects. Payment I accept Visa. MasterCard, American Express, and Discover through PayPal or personal checks. I DO NOT ACCEPT international cashier's checks, company checks nor do I accept credit card payments over the phone. Please note, PayPal's buyer and seller protection policies require that I ship to the confirmed address used at the time a payment is made. Shipping Smaller items will be shipped via USPS Priority Mail while larger items will ... morebe shipped via USPS Parcel Post. I reserve a right to refuse to ship to certain destinations. Such as Afghanistan, Nigeria, etc. even if listing does not specifically excludes these countries. Also. EBay shipping calculator shows approximate shipping amount. Once your item is packed and weighted, I will put actual shipping cost on your invoice. If it turns out(and has happened many times in the past) that shipping charges are higher than estimated, buyer is expected to pay the difference. I will provide a proof of how much I paid. Terms of Sale Unless otherwise noted. All sales are final. No return or exchanges, unless the item is significantly different from listing description. Buyer is encouraged to buy insurance. I cannot be help liable for damage during shipping. If you have a question about the item, please ask it before bidding or buying. I return messages promptly. Do not assume anything! About Us I trade on eBay since 2002 and respect eBay community. Rules and regulations. I enjoy doing business with people and sold my items all over the world. I hope you will have a pleasant experience buying from and selling to me. If you are unhappy about the transaction, I encoura
This is a Miller Dynasty 300DX. Nice shape. I have had this a few years and haven't used it. It has 2000 hrs, powers up control panel works, no errors. Was guaranteed to work when I got it, but i have never used it. I am selling as is with no warranties. Powered by The free listing tool. List your items fast and easy and manage your active items.
THIS IS A WORKING MILLER COOLMATE 3 COOLER AND MILLER DYNASTY 300DX WELDER WITH CART GOOD CONDITION# Shipping on this item is 300.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be ... moreshipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item.
Used for a few hours Miller Dynasty 200SD $2950 I have used these machines for years and they are the best. Im selling this extra welder since its not being used enough. Put whatever plug you want on the end. even works on 120v 30amp if your in a pitch or just have something simple to weld. I use the 3phase 220c 4pin plug to get the most power out of the machine. Comes with the ALL-IN-ONE Air-cooled TIG Accessory Kit for your solid state Miller TIG welder. Kit includes: Protective Case with carrying handle, WP1725R(25 ft) TIG torch, RFCS-14 HD foot control, International Style Torch Adapters, Smith Regulator/Flowmeter, 200A Electrode Holder with 15 ft cable, 300A Work Clamp with 15 ft cable, 12 ft Gas Hose, AK-2 Torch accessory kit, Gas hose coupler The Dynasty 200 SD im selling is a serial numbered unit starting with MC0 meaning it was built ... morelast year 2012 which is the latest and newest unit from Miller it looks(chart in images with serial number) Has the standard 4 year warranty. If you ever have a problem your local miller repair center will fix it no questions asked because the serial number is within the warranty period. Can give you receipt if anything happens just contact me. Thanks and let me know if you have any questions. Ill ship in 2 days or basically Monday. Fedex insured. 48states $67 two boxes. Ask me any questions if your serious about buying.
You are bidding on a used 20 SERIES WATER COOLED tig torch that is 25 feet long. The item has been used and is tested and in great working condition. The leather cover does show some wear as the item is used. Fits Miller machines. Thermal Arc machines, Longevity and anything that uses a 1/2" dinse and 5/8-18 gas fitting. A 17 series torch is the standard torch found on many tig welders. It uses 10N series Alumina Cups which are about 1 7/8" long. The super flexible one piece cable assembly is 25 feet long. This is a 150 amp 100% duty cycle torch. This 17 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. Need a water cooler? We have them in 110v. 220v or dual voltage! Ebay item# ... more170971865735 Happy bidding! Be sure to check out our store for other products as well as our new flowmeter!
Miller Dynasty/Maxstar Tig Runner welder cart package w/ XXL gas cylinder MILLER DYNASTY 300DX WELDER IS NOT INCLUDED. ALREADY SOLD YOU GET EVERYTHING PICTURED EXCEPT MILLER DYNASTY 300DX WELDER Miller's list price on this package is $2773 you get these 5 items listed below: 1) Miller Tig Runner cart part# 300244(list price $739) 2) Miller Coolmate 3(rated 600 amp) water cooler part# 043007(list price $842) 3) BRAND NEW Miller RCCS-14 hand amp control part# 043688(value $233) 4) Weldcraft water cooled tig torch kit part# 300185(list price $659) includes: 25 ft Weldcraft® torch. Cable cover, torch accessory kit, regulator/flowmeter, 12 ft rubber gas hose. Water-cooled Dinse torch adapter, and 12 ft weld lead with clamp and Dinse connector. 5) empty X-Large 330 cubic ft. capacity welding gas cylinder(list price $300) buyer may arrange ... moretheir own shipping If you need a shipping quote. Call FreightCenter.com for shipping quotes. They have very good rates. call Todd Eaton at 1-800-716-7608 ext.1056 free local pickup Steve 386-308-3908
Miller Dynasty Front Panel 244026 pulled from working unit. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1409ccf9c74-0x103-
For your consideration is Miller Dynasty 200 SD Tig and Stick Power Source in excellent condition included with Miller Contractor Torch and Pedal Kit. WeldCraft Torch and Hose are New and Unused still wrapped in the factory ties. Model: Dynasty 200 SD 907099 and Torch Kit with foot control RFCS-14HD 195055 Serial: LG340455L Specification: Input AC Voltage 115V. 120V, 200V, 208V, 220V, 230V, 240V, 260V, 380V, 400V, 415V, 416V, 440V, 460V Input Power: 115 Volts; 3 Phase; 50/60 Hz; 200-460 Volts; Single Phase; 50/60 Hz, Rated Output. TIG, 3 Phase: 200 Amps; 18 VDC; 20% Duty Cycle; 150 Amps; 16 VDC; 60% Duty Cycle, Rated Output. TIG, Single Phase: 150 Amps; 16 VDC; 60% Duty Cycle; 140 Amps; 15.6 VDC; 40% Duty Cycle; 100 Amps; 14 VDC; 100% Duty Cycle, Rated Output. Stick, 3 Phase: 200 Amps; 28 VDC; 20% Duty Cycle; 130 Amps; 25.2 VDC; 60% Duty ... moreCycle, Rated Output. Stick, Single Phase: 130 Amps; 25.2 VDC; 60% Duty Cycle; 100 Amps; 24 VDC; 60% Duty Cycle; 90 Amps; 23.6 VDC; 100% Duty Cycle, Output Range: 1-200A AC/DC, Dimensions(H X W X D) 13 1/2" X 7 1/2" X 21 1/2" Features: Auto-LIne™ Power Management Technology allows for input voltage hookup(115-460V) with no manual linking. Providing convenience in any job setting ideal solution for dirty or unreliable power. Fan-On-Demand™ cooling system operates only when needed. Reducing noise, energy use and the amount of contaminants pulled through machine. Lift-Arc™ starting provides x-ray clean welds in AC or DC arc starting without the use of high-frequency, Blue Lightning™- high-frequency arc starter for non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set and increases productivity. Compatible with Wireless Remote Controls. Improve productivity. Eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Extended AC Balance(30-99% controls the a
Miller Dynasty DX-300 AC/DC TIG WELDER This item is a complete set. Ready to weld when received. The only thing that doesn't come with it. Is the gas and electrical power source. Miller Dynasty Comes with the following: Flow meter(NEW) Gas Hose( New) Ground cable and clamp(NEW) 17/12ftR Tig Torch(NEW) AK-2 TIG Torch kit(NEW) Foot control(NEW) Specifications Rated Output AC DC Volts 30 28 Amperes 250 200 D uty Cycle 40% 40% Max OCV 90 90 Input Volts 230/460 Hertz60 Phase KW Amperes 1 10.4 62.6/32.2 3 10.5 26.3/17.9. Amperage Range(5-300) Serial Number# KJ096837. Stock Number# 903519-01-1. ANY QUESTIONS ABOUT THE MILLER DYNASTY CALL GARY 216-905-9353)
Brand new tig finger amp control. This is a universal fit for torches. During shipping the finger adjustment slide broke off. CK will sell you a new potentiometer that can be soldered on. Or you can try to glue back on the finger grip. The cable is 28ft and is in perfect condition. This sells new for $180
The Miller Dynasty 200 DX TIG Welder and Air-Cooled Contractor Kit with Foot Control offers pulse on/off. Pulse frequency, peak duty cycle, background amperage, initial amperage, initial slope time, final slope time and final amperage control. Wireless Compatible Improve productivity. Eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Lift-Arc Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. Blue Lightning- High Frequency Arc Starter For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity. Auto-Line Power Management Technology ... moreAllows for any input voltage hookup(115-460 V) with no manual linking. Providing convenience in any job setting. Ideal solution for dirty or unreliable. AC Waveforms• Advance Squarewave provides a fast freezing puddle. Deep penetration, and fast travel speeds. Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action. Sine wave is for customers that like a traditional arc. It is quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds. AC and DC TIG Features• Extended AC balance(30-99% controls the amount of oxide cleaning(amperage time in EN) which is essential for high quality welds on aluminum. AC frequency(20-250 hz) controls the width of the arc cone and the force of the arc. DC TIG provides exceptionally smooth and precise arc for welding exotic materials. Stick Features(AC/DC) Tailored arc control(DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer. More penetrating 6010. Hot Start adaptive control provides positive arc starts without sticking. AC frequency control adds add
Almost new contractor kit hard case. This case will fit a gas regulator. Foot pedal, ground lead, tig torch and more. Great condition.
You are bidding on a used 17 series tig torch with 12 foot superflex cable. The torch has been tested and works great. The long back cap is included. This torch features a 35mm(1/2" dinse connection and a 5/8-18 side gas connection. Can be used on your Miller welders such as a dynasty(no diversion) and Thermal arc welders and any welder that uses a large dinse and 5/8" gas fitting. We can also customize this torch to fit your welder. Just email us for a price quote. THIS IS A NO RESERVE AUCTION! Buy in confidence from HTP America. Inc. your total welding specialist since 1981, where for over 30 years all we have sold are quality welding supplies at affordable prices. Call us at 1-800-USA-WELD(800-872-9353) or send an e-mail if you have any questions on this product. 1 time item- print room HAPPY BIDDING!
This is a used less then a year old Miller Dynasty 200DX 115/ 230 volt welder. It has some scratches, dings and wear marks This welder comes complete with foot pedal.12 foot super flex tig torch cable, 17 torch head, 9 flex torch head, CK17 25 foot super flex torch, argon regulator and hose, ground cable and clamp, stick welding stinger and cable, power cable 50 amp plug installed and 230 to 115 volt pigtail This unit has been tested in all modes I STAND BEHIND THE ITEMS I SELL WITH PRIDE AS A HARD WORKING AMERICAN PLEASE LEAVE POSITIVE 5 STAR FEEDBACK I WORK VERY HARD TO KEEP MY FEEDBACK RATING PLEASE CONTACT ME IF THERE IS A PROBLEM BEFORE LEAVEING FEEDBACK. THANK YOU, To learn more about this and other items I have for sale on ebay or for customer service go to georgesplasmacuttershop.com
Up for sale is something you do not see come available very often. A used Miller Dynasty 200 DX welding package in excellent working condition!I will list everything that it comes with along with a description(I will try not to miss anything) Everything works like it should, some of the stuff is brand new! Please do not ask me to break off one item, this will be sold as package only, Thank you! Please ask all your questions first and do your research before bidding and committing. This is going to make someone pretty happy for sure. 1) Used 2010 Miller Dynasty 200DX(1) Used Miller Coolmate 3 water cooler(1) NEW never hooked up Miller RFCS-14HD Heavy duty foot control(pedal) 1) Used 25' CK20 by Weldmark super flex line HW20 tig work(1) Used Miller Water Cooled dinse to water adapter(1) NEW in bag Miller Air cooled dinse to gas adaptor(1) ... moreUsed CK HW17 air cooled tig torch with adaptor for field applications(1) NEW in bag Miller Dynasty protective cover Due to the high value of everything I will ship it in 3 separate packages to ensure safe shipping and proper packaging! I only accept PayPal for both of our security and ship only to the lower 48 states. Buyer pays actual shipping cost listed. Thank you! Bid with confidence due to my 100% positive feedback and no BS buy-it-now and auctions!
Miller Dynasty 300 DX TIG Runner Before you bid contact me at logandarrick@gmail.com to explain my terms of the deal and for shipping quotes. Buy it now price: $2500 We bought this machine brand new $8.250.00 from Matheson Tri-Gas few years back. We only use this machine for tacking stainless steel and aluminum thin sheet material. As you see on the pictures it is in pristine conditions. No dings or scratches what so ever. Everything is in excellent working order. Believe it or not we only had 5:31 hours of arc time on the machine and 1.520 times that we stroke the arc. See the digital meter dial on pictures. Always kept the machine covered with a plastic at a corner of the shop and it's been about 10 months we didn't use. We are expanding and need the extra space. So no matter how much we love the machine it's time to let this ... morebaby go. Will include everything listed: See Pictures for Reference) 25 ft. Miller Diamondback TIG Torch 25 ft. TIG Torch Leads Protective Cover AK4C TIG Torch Accessory Kit Smith Gas Flow Regulator w/ Hose 15 ft. Work Lead RFCS 14 Miller Foot Remote Control 25 ft. cable Miller Coolmate 3 Miller Dynasty 300 DX unit Tig Runner Cart w/ Bottom Drawer Manuals
Miller Dynasty 200DX AC/DC Inverter Tig Stick Welder w/ Aluminum Cart(ready to weld. All you need is gas) it runs on regular household 115v single phase power(minimum 35 amp breaker) also runs on 230v single phase power(minimum 30 amp breaker) also runs on 230v/ 400v/ 460v three phase power(minimum 20 amps breaker for 230v& 10 amps minimum for 400v& 460v) 1- 200 amp welding output in AC/DC& stick welding modes has pulse& sequencer control you will get these items as pictured only: 1) Miller Dynasty 200DX tig welder 2) aluminum rolling cart 3) WP-17 air cooled tig torch w/ cover 4) ground cable w/ clamp 5) RMS-14 Remote On/Off Control(14-pin plug) part# 187208 6) gas flowmeter w/ hose 7) power cord(NO PLUG) LOCAL PICKUP ready to be tested thoroughly before purchase Steve 386-308-3908
Miller Dynasty 200 DX 120-460 VAC TIG/STICK Welder Part# 907099011 Serial#MA460772L This listing is for a USED machine with no factory warranty. Machine has been tested by our Certified Miller service technician and operates to factory specification. Industrial Applications: Precision Fabrication Petro/Chemical Aerospace Food/Beverage Industry Dairy Shipboard Features include: Auto-Line Technology(any input voltage 115-460V with no manual linking) Extended AC Balance(30-99% AC Frequency Control(TIG and STICK AC Waveforms Variations(Advace Squarewave. Soft Squarewave, Sine, Triangular) Lift Arc Capabilities Smooth DC Welds Hot Start Stick capability Fan On Demand Excellent Portability Welding Amperage Range: TIG 115V = 5-150A AC. 1-150A DC/TIG 200-460V = 5-200A AC, 1-200A DC Includes: Power source. Primary power cable(no plug) and 2-50mm dinse ... moreconnectors. Shipping includes UPS Ground shipment to the Continental Unites States. Alaska and Hawaii available at an additional charge. No international shipping available at this time. Expedited shipping is available. Please call for details! We are a Welding Supply company that has been selling new/ used welders and welding supplies for over 40 years. If you have any questions. Just give us a call. Jodi 602 252-0341 or 602-908-7132 John 602 206-0571
Miller Dynasty 300DX Welder Here we have a Miller Dynasty 300DX Welder in very good used condition. This unit was recently purchased from a local government facility which was removing excess. Working welding equipment. Miller Dynasty welders feature advanced inverter technology for the most flexible AC/DC TIG/STICK solutions in the welding industry. Compact designs offer superior arc performance and control that set new standards for productivity and weld quality. While lowering the cost of installation and operation. Very good working condition. Includes only the welder. No cables or other accessories included. BE SURE TO CHECK OUT OUR PHOTOS! YOU WILL BE RECEIVING THE EXACT ITEM SHOWN. Please contact us for a freight quote prior to bidding! Please include your zip code and tell us if we will be sending to a business or residential address. ... morePlease also let us know if you have a dock or fork lift available. We will work hard to get the best possible freight quote for you! THANK YOU For considering our item! We have been selling on ebay for over 12 years! Bid With Confidence!
This is a Miller Dynasty 350 PC6 card. Miller Part Number- 224540. There are different part numbers that interchange and fit the Dynasty 350 as PC6, so please do your research and ensure that this one will work to provide parts for you or you may use this card in your welder per the limitations below. This card will interchange with part numbers: 233154, 235537, 235538 and 235539. This card has not been modified in any way. It is OEM stock. If your PC6 is dead this will replace it and get your machine working again! Please note this card works in every way except for the HF start function. NOTE- THIS CARD WAS REMOVED FROM SERVICE BECAUSE IT DOES NOT OUTPUT THE PROPER 700Hz SIGNAL TO PC7. THE HIGH FREQUENCY FEATURE OF THE DYNASTY 350 THAT THIS GETS INSTALLED IN WILL NOT BE FUNCTIONAL. AC AND DC WELDING WILL WORK BUT IT WILL BE LIFT ARC ONLY, ... moreNO HF! ALL OTHER FEATURES APPEAR TO BE OK. It is a piece of electronic equipment so returns will not be accepted. Please ask all questions prior to bidding. Brand new these sell for ~$800 so get one here that is missing one function for half price! Thank you!
This is a Miller Dynasty 350 PC7 card. Miller Part Number- 214712. There are different part numbers that interchange and fit the Dynasty 350 as PC7, so please do your research and ensure that this one will work for you. This card will interchange with part number 233144. This card was used while troubleshooting a Dynasty 350 but the PC7 wasn't the issue so this card is no longer needed. This card has not been modified in any way. It is OEM stock. The point gap has been set properly. It is tested and known to be working. If your PC7 is dead this will replace it and get your high frequency working again! It is a piece of electronic equipment so returns will not be accepted. Please ask all questions prior to bidding. Brand new these sell for ~$600. Get it here for 40% off! Thank you!
bust 36. WAIST 27-28, HIPS 40, ABOUT 22 INCHES;OMG BLOUSE, JACKET 24 INCHES, SKIRT 19 INVHES CRINCKLE MATERIAL, BEADED,
Stunning NOLAN MILLER Dynasty Vintage Blue Wool Skirt Suit Blazer Black Beads 12 Nolan Miller"Designer for Televisions Dynasty" Vintage Suit Size: 12 Nolan Miller was the well known designer for the television show. Dynasty" This 2 piece suit is a true vintage piece from the'80's. The jacket has a single hook and eye closure, with beautiful black beading in a swirl design. The sleeves have the same distinctive beading at the wrists. The skirt is simple, with a vent in the back. This stunning suit is 100% wool. Fully lined, and very comfortable to wear-a classic style taken one step further! Jacket/Blazer*Chest- 38" Sleeve- 22" Length- 24 1/2" Measured from the collar in the back. Down to the bottom hem. Hook and eye jacket closure- Located approximately 3/4 of the way down the front of the jacket. Beading ... morein a swirl pattern. Black sparkle beads and sequins edge the front opening of the jacket. Same beading edges the bottom of the front of the jacket. Extending approx. 5" around to the back. Beading also at the cuffs. Additional detail- shoulder pads. Fully lined. Skirt*Waist- 29" Length- 23" Measured from the waistband in the back. Down to the bottom hem. Skirt opening at hem- 19" Closure- Zipper and single button in the back of the skirt. Vent at the hem of the skirt in the back. Fully lined. Material- 100% Wool. Color- Royal blue. Beading- Black. Very lightly worn. Mint condition. Please email cinfru2 with any questions you may have. Want another view? Request another picture! Express mail available upon request. Email cinfru2. Smoke free environment. Thank you! PayPal Accepted. Returns within 14 days. Full refund. Buyer is responsible for return postage. USPS Priority Mail Medium Flat Rate Box. Price: $13.00. USPS Standard International. Price: $30.00. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility inkfrog terapeak. I000000. InkFrog Analytics.
Purchased from a Sotheby's auction about 14 years ago. In good condition. No remarkable flaws. Worn on set of Dynasty then became part of Linda Evans personal wardrobe until she auctioned the set. Size medium, 8. Kimono is very long.made to be worn with heels. I am 5"10 and the set is almost too long for me. I've never worn the set, only tried on. Gorgeous handwork embroidery. Comes with a certificate of authenticity signed by Nolan Miller.
Miller Dynasty 200 Arc Welder Output range(Amps) 1 to 200, Rated output: 150A@ 26 V, Amps AC: 1-200, Duty cycle: 40% Input Amps: 31/20/13/10, Input Voltage: 120-460, OCV: 80, Hz: 50/60, Overall height: 13-1/2 inches, Overall width: 7-1/2 inches, Overall Depth: 21-1/2 inches, Features programmable HF start parameters. Low OCV Stick, HF arc starting, and Lift-Arc starting. Inverter-based AC/DC power source. Extended balance control range(30-99% EN) AC frequency control range of 20 to 250 Hz. Built-in pulser. DX series model is for applications that demand greater control. Provides pulse on/off, pulse frequency, peak% time, background amperage, initial amperage, initial slope time, final slope time, and final amperage control. Comes with bottle. 2 welding masks, 1 set of leather gloves, and stainless steel welding wire. Well maintained, in great ... morecondition. Previously used in a professional workshop. Pick-up only. Business located in Richmond, CA. Please contact seller for additional information.
Miller Dinse connector female connection for weld cables. Will also fit any other welders that use this style. USED but in perfect condition. I am retiring after 40+ years of welder repair and selling all of my Inventory of parts for welders and plasma cutters. Anything you may need. Just ask and I will try and help I have parts for Lincoln and ESAB also. I have parts for many brands.
Miller Power switch(on off) control. Three pole switch will work for three phase and single phase machines. Will also fit any other welders that use this style. USED but in perfect condition. I am retiring after 40+ years of welder repair and selling all of my Inventory of parts for welders and plasma cutters. Anything you may need. Just ask and I will try and help I have parts for Lincoln and ESAB also. I have parts for many brands.
Miller Dynasty 350 TIGRunner Package with Foot Control(Water-Cooled) Miller Stock#951401 S/N MD040237L This listing is a factory reconditioned machine. There is a full. Three year factory warranty available for this unit. Rated Output 300 A at 32 VDC. 60% Duty Cycle, 60 Hz,60% Duty Cycle 1- or 3-Phase Input Power Amperage Range 3– 350 A Industrial Applications: Precision Fabrication Heavy Fabrication Pipe and Tube Fabrication Aerospace Aluminum Ship Repair Anodized Aluminum Fabrication Processes: TIG Pulsed TIG STICK Features include: Meter Calibration 120V Auxiliary Power 4 AC Waveforms Auto-postflow Fan-on-Demand Lift-ARC and Blue Lightning high Frequency start Program Memory Package includes: Power Source. 8ft Primary Cord(no plug) Factory Installed Runner Cart, Coolmate 3.5 water-cooler. 300A Water-Cooled TIG Torch Kit, Foot Control, ... morework lead with ground clamp. We offer discounted shipping rates to the continental 48 states. To receive a quote on the shipping charges. Just send us an e-mail with your zip code. Please indicate if this is a business, residence. Or farm and whether a forklift is available at the time of delivery. We are a Welding Supply company that has been selling new/ used welders and welding supplies for over 40 years. If you have any questions. Give us a call. Jodi 602 252-0341 or 602 908-7132 John 602 206-0571
WELDMARK GUN FOR A MILLER 300 DYNASTY. IN GOOD SHAPE WORKS GOOD. PLEASE LOOK AT THE PIC'S FOR MORE INFO AND COND. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNEDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY NO INTERNATIONAL TRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES.
Rare! Hardbound. Original copy of The Miller dynasty: A technical history of the work of Harry A. Miller. His associates, and his successors. Californian Mark Dees began to seriously accumulate Miller lore. Interviewing those still living who had known or worked with Miller, along with survivors from the prewar racing world. He was able to acquire a half interest in the drawings and patterns that had been preserved by Bugatti restorer O A"Bunny" Phillips, and gradually assembled a pictorial record of the entire Miller output, along with that of Miller-inspired successors Offenhauser, Sampson, Sparks, Winfield, and Novi. This extensive research resulted in The Miller Dynasty(Barnes Publishing, 1981) the first edition of which earned a Cugnot Award honorable mention from the Society of Automotive Historians. That book quickly sold ... moreout and prices for copies in the used market escalated. Meanwhile, the author continued his quest for knowledge, and this heavily revised and expanded edition, adding 48 additional pages of text and 42 more photos arrived in 1994. This copy of The Miller Dynasty is that revised and expanded second printing from 1994. When Dees was killed in a road accident in 1996, the racing history community lost one of its major contributors, but his legacy lives in the pages of The Miller Dynasty. Very nice overall condition. Perfect original dust jacket and seam, there is one bad spot on the actual red cover. Coffee table size book, 564 pages. Great addition to any collection! From the estate of an avid collector of Racing history. C heck my auctions for additional rare items from this awesome estate find. I will combine auctions where it is possible. I have included the zoom feature on the auction page. Look at the photos and bid accordingly. I will answer any questions you may have. Sold as is. Buyer pays actual shipping. No handling charges. No personal checks accepted. Payment is expected within 7 days from end of auction. Unless bidder and I have agreed different prior to close of auct
Miller Dynasty DX200 Machine in EXCELLENT Condition. Used by an individual for One and only Classic Car restoration. Has never been used in a business shop. Very low hours of use. Purchased new from Luke Auxier Weld Mart in the United States. I am the original owner. What you see in the pictures is what you will get. It includes SSC Foot Control. Special Weldcraft torch and Miller Elite Automatic Helmet. Arc welding outfit is included in contractor kit. Various assortment of tungsten come with the unit. Again the unit is in excellent condition and only worked with Pure grade Argon Gas( NA50 named in Europe) After your purchase you will be informed of every step of shipment status. You will receive 2 packets. One the main unit and one with the accessories. All at your door within 10 working days. Free shipping What you will need to put the ... moremachine in use: 1. Replace the European plug with an American plug either single phase or 3 phase. European plug will not be included) 2. Replace the Hexagon European gas inlet on gauges with an American thread one. 3. Add new batteries on helmet. Thanks for looking. PLEASE NOTE: I ONLY SHIP MACHINE to USA. CANADA& European Union. NO Exceptions.
Dynasty 280 DX. Purchased in Jan of 2014. This welder is an outstanding machine and it really shows when welding aluminum. Very smooth. Selling due to easing up on my side job of welding and machining. The unit is practically new with 24 hrs and 48 min of arc time. Used only for stainless and aluminum. The stick portion has not been used. The unit is hard wired to a disconnect which also has 110 coming off to power the Cool Mate. The Cool Mate is switched separately. All paper work and manuals included. The other items are listed below. Miller Cool Mate cooler. Excellent condition with no leaks and the cooling fins are in excellent shape. 25' CK 300 amp water cooled.Super Flex with flex head torch. 25' CK 200 amp air cooled, Super Flex with flex head torch. Miller wireless foot control. Finger Tip control( currently mounted on the ... moreair cooled torch) 20' work cable with brass clamp. The torches, wireless foot control and finger control each have connectors and can be switched out quickly* Full Tank of Argon with gauge. 16 boxes of various types and size of tungsten. Various torch tips to include.40, 1/16 and 3/32. Lots of tig cups and gas lenses. Pyrex cups for the gas lenses. Two Tig Fingers. Tungsten stick out length tool. Like new Tig Sharpener with extra grinding wheel. Sharpens sizes.40, 1/16, 3/32 and 1/8. Large amount of Stainless and Aluminum filler metal in various sizes. Local Pickup Only. I can be reached at 910.308.9234 for any questions.
This is a black wool two piece skirt suit by Dynasty designer Nolan Miller. It has a large rhinestone button to close the peplum jacket. The padded shoulders are embellished with shiny faux leather to further accentuate the dramatic power suit so popular in the 80's. The label size is 12.
UP FOR AUCTION RARE HUGHES AIRCRAFT INVENTION AWARD DEES THE MILLER DYNASTY TECHNICAL HISTORY NO RESERVE EXCELLENT CONDITION BOOK MEASURES APPROX 12.5" x 9.5" WEIGHT IS OVER 5 lbs A GREAT FIND PLEASE SEE PHOTOS LUCKY WINNER TO PAY $9.95 FOR SHIPPING VIA PRIORITY MAIL ALL ITEMS SOLD"AS IS" UNLESS SPECIFIED AS"NEW" GOOD LUCK AND THANKS FOR LOOKING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14509704347-0x119-
Here I have a Miller Dynasty 300 Dx Tig welding machine with three phase 230/460 volts input. It does not weld but everything checks out ok on meters when welding except the amps out-put. High frequency starts but doesn't weld. When you strike an arc it doesn't matter what you set it on the amps only go to around 18. I have had the main control board repaired and it did not make any difference. This machine was great to weld with when in operation. I don't believe it is anything major but my company just bought a new welder to replace this one and ask me to list it for them. Comes with original owners manual. No torch or foot control what you see is all you are bidding on. Thanks.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14528ae2f55-0x10d-
Miller dynasty 200 heli arc welder A/C D/C used but in good condition. Comes with miller cool mate water cooler. Weldtec wp20 torch, ground cable, regulator everything you need. Power was 208 three phase, but I believe it works on all single phase or three phase?
this is a like new 200 dx with the best of ever thing it comes with the crafter series torch cs 310 and the mini torch with dual valves to work two torches and the miller dvi plugs for 120v or 220v the welder is like ne under warranty the coolmate 3 has a new core the cart is home made the bottle gos if picked up if shiped no bottle 831 449 0376 or 210 1502 yes it comes with regulator miller foot pedal and slide finger tip control this is a very expensive set up the two torches are 600 dollars the dvi mulity plugs 280.00 the two water valves 150 the two gas valves 85.00 it has the gas lens sit up nice stuf
Nolan Miller Dynasty Suit from the 80's I don' know why I kept it I guess it had some good memories.time to clean out my closet. I had 2 other vintage suits by Criscione check my listings Comes from a smoke and pet free home Payment required in 24 hours
Beautiful Size 14 Nolan Miller Dynasty Collection Jeweled Light Pink 3 piece Women's Suit. Jacket. Camisole& Skirt. The suit has been drycleaned. Jacket includes beautiful beading with faux pearl& rhinestone buttons at opening and sleeves. Shoulders are padded. Discoloration on button opening due to metal on button. Shoulder to shoulder 18 1/2" Shoulder to hem 25" Sleeve length 23" Underarm to underarm 21" Jacket is fully lined. Camisole is beautifully beaded. Underarm to underarm 17" This does not include additional stretch from elasticized back. Two wide straps. Top of shoulder strap to hem 22" Skirt is fully lined and includes 2 side pockets. Button and zippered back closure& slit at back of skirt. Waist 28 1/2" Waist to hem 28" Please do not hesitate to ask questions prior to your ... morepurchase& Thank you! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1454d8b0bfc-0x116-
This is a Miller 300DX Dynasty welder. It has 41.55 arc hrs on it and 12539 arc starts which is very low for this machine. As you can guess from the time. It is in great condition and is ready to weld. The outside has a few scratches, but are only cosmetic. If you have any question please call my cell at 4053415906- Call me or email me your zip fom a quote Thanks David
Up for bids I have a Miller Dynasty 350 PC8 P/N 207157 Circuit Card Assembly(Dynasty Only) it was removed from a machine that had other issues. This part was working fine. Please contact me with any questions. Thanks
Up for bids I have a used Miller Dynasty 350 PC6 224 540 control circuit board. It was removed from a machine that had other issues. This part of machine worked fine. Please contact me with any questions. And included I have a Miller Dynasty 350 PC8 P/N 207157 Circuit Card Assembly(Dynasty Only) it was removed from a machine that had other issues. This part was working fine. Please contact me with any questions. Thanks Both for 1 price
This is not a real listing. It is to show fellow ebayers how easy it is to steal another eBay listing details and create a fake add to steal our money! There is another listing# 321400144331 that sopposed has a welder for auction or buy it now. This listing is fake and he will steal your money! It has already been reported to ebay and authorities. If you dont believe me just look at his recent feedback, it has the word SCAMMER ALL OVER! Posted with Posted with
MILLER DYNASTY 200 DX TIG PACKAGE WITH FOOT CONTROL. FLOW METER, COOLMATE 1 ALL ON CART WITH STICK WELDING LEADS. GROUND CLAMP& ELECTRODE HOLDER. TIG HOLDER& CABLES INCLUDED WITH ORIGINAL BOOKS. VERY NICE& CLEAN MACHINE. USED LESS THAN 5 HOURS SINCE NEW. YOU GET EVERYTHING EXCEPT THE GAS BOTTLE.
THIS IS A GOOD LIGHTLY USED CNI-26VH TIG TORCH 25' LONG. GAS COOLED, 200 AMP PLEASE LEAVE POSITIVE 5 STAR FEEDBACK I WORK VERY HARD TO KEEP MY FEEDBACK RATING PLEASE CONTACT ME IF THERE IS A PROBLEM BEFORE LEAVEING FEEDBACK. To learn more about this and other items I have for sale on ebay go to Thank you
Welcome to"babyjanecollectibles" This is a big 12" x 18" copy of an amazing WARDROBE/ COSTUME SKETCH design by NOLAN MILLER. At this price. It is obviously not an original, it is a copy on HIGH QUALITY FUJI CRYSTAL ARCHIVE paper. It really looks fantastic and when it is framed. it looks as good as an original but this one will never fade! Make sure you click on my other items as there are a few NOLAN MILLER sketches on right now and a grouping of them would look FABULOUS TOGETHER! The logo for BABYJANECOLLECTIBLES does not appear on the actual item. The best way for this to arrive undamaged is when I ship it rolled in a PRIORITY MAIL box. Shipping for addresses in the USA is $10. A single shipping fee will cover as many images as you can amass you might want to consider getting a few. Shipping OUTSIDE of the USA is $20. ... moreIf you're in the state of California you must also pay sales tax. Your item must be paid for within ONE WEEK of purchase. We love PAYPAL. bigT) Powered by SixBit's eCommerce Solution
Nolan Miller 1980's dynasty collection gives you plenty of bling. It is beautiful. A masterpiece. And growing scarce Size 8 3 piece suit If you have less then 5 feedbacks you may not bid on my items without permission. Any bids you do cast will be canceled. see below ASK A QUESTION Feedback extortion is a crime. It is not tolerated and will be reported to eBay without notice. Payment due in 48 hours. PLEASE DO NOT LEAVE BAD FEEDBACK UNTIL YOU TALK TO ME AND TELL ME WHAT HAS MADE YOU FEEL THIS WAY. I AM CERTAIN I CAN MAKE IT RIGHT. Check out my! Be sure to add me to your!
Lightly used. Well kept Miller Dynasty 300DX AC/DC TIG and Stick welder. Allows welding of a wide range of materials(including aluminum) and thicknesses. Includes owner's manual, regulator, ground clamp, stick lead, air cooled TIG torch, both a torch mounted hand control and a foot control(you can only use one or the other at a time, it is just a matter of preference, so you can try out each type and sell the one you do not like) This machine has not been used much and has only been used at low amps, usually around 10-100A, mostly 70-90A. I bought this machine new and have not used all the features of the machine, but the features I have used worked when I used them. I have used it in both single and three phase power modes. I have never used the 460V mode. The case still looks almost brand new. The only known issue with it is the LED ... moredisplay, which has the very top right segment of the left display missing(in the picture showing the left display with a number in it, the number should read 3.0 and you can see that one segment on the zero is missing) You probably will primarily be using the right display anyway most of the time. Shipping weight is 160lb and I will put on a skid and load on your truck freight carrier, or I can provide a quote for shipment by FedEx Freight. It will take a few days to prep for shipping.
Miller Dynasty 200 DX Complete Package with Wireless Foot Control Miller Stock#951397. Serial no. ME180125L This listing is for a unit that was previously demonstrated by a Miller representative. It holds a full manufacturer warranty and is complete. Other than torch coolant. Industrial Applications: Precision Fabrication Petro/Chemical Aerospace Food/Beverage Industry Dairy Shipboard. Processes include: AC/DC Tig. Pulsed TIG, Stick, and Air Carbon Arc(5/32 inch maximum) Specifications: AC TIG Features Balance control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds. These models provide extended ranges. Frequency controls the width of the arc cone and can improve directional control of the arc. AC Waveforms: Advanced squarewave. Fast freezing puddle, deep penetration and fast travel speeds. ... moreSoft squarewave for a soft buttery arc with maximum puddle control and good wetting action. Sine wave for customers that like a traditional arc. Quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. Fast travel speeds. DC TIG Features Exceptionally smooth and precise arc for welding exotic materials. AC/DC Stick Features DIG control allows the arc characteristics to be changed for specific applications and electrodes. Lower the DIG setting for smooth running electrodes like E7018 and increase the DIG setting for stiffer. More penetrating electrodes like E6010. Hot Start™ adaptive control provides positive arc starts without sticking. Frequency control adds additional stability when Stick welding in AC for smoother welds. Other Features: Auto-line ™ allows for any input voltage hookup(115–460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power. Fan-On-Demand™ power source cooling system operates only when needed. Reducing noise, energy use and the amount of contaminants pulled through the machine. Lift-Arc™ start provides AC or DC arc initiation without the use of high f
You are bidding on this MILLER DYNASTY 200DX WITH PEDAL AND TORCH PACKAGE. In very good working condition, showing wear from use otherwise in great original shape. The pedal and tig torches have a little more use as I have other welders. This machine was my back up so it has not have much use. Please look at the pictures for a better description and condition. Buyer pays shipping. This unit& components will be shipped in two boxes) Paypal only with confirmed address.
Well Cared For. Works Perfect. Contact Me If You Want To Try It Out. Local Pickup Only. $200 Paypal Non Refundable Deposit Due Within 24 Hrs. Balance Due At Pickup. No Returns. Welder Is For Sale Locally. I Reserve The Right To End The Auction At Any Time.
Vtg 80s Beaded Blazer Suit Jacket Skirt 10 Nolan Miller Dynasty Cobalt Blue Deco Gorgeous Vintage Wool Suit From the Nolan Miller Dynasty Collection- Emmy-winning iconic costume designer Nolan Miller. Was best known for his strong shouldered dresses and power suits which established the over the top glamour look on the 1980's tv series"Dynasty" The creations became so popular, Dynasty inspired its own line of apparel. The Dynasty Collection was a series of haute couture designs based on costumes worn by Joan Collins, Linda Evans and Diahann Carroll. The beautiful designer suit features hundreds of stunning black beads in a deco style pattern on front and back on a vibrant cobalt blue wool Built in shoulder pads. Three decorative buttons at cuffs. Jacket and skirt are fully lined High waist skirt w/ kick pleat in back. Zips up ... moreback with button closure 100% Wool Lining: 100% Acetate. Size 10. Please check measurements to ensure fit. Jacket- Bust: 42" Waist: 42" Hips: 42" Sleeve(shoulder to cuff) 24" Length Nape of Neck to Hem 21.5" Skirt- Waist: 28" Hips: 39" Length: 29" Excellent condition- no stains. Holes, etc. Surprisingly, with a piece of this age, it doesn't appear any beads are missing! We love to combine shipping so be sure to check out our!
MILLER ELECTRIC DYNASTY 350 AUTOLINE 208- 575 TIG WELDING POWER SUPPLY. THIS UNIT IS CLEAN AND IN LIKE-NEW CONDITION! Please call Northtech Autoamtion Inc with any questions. We are a FACTORY AUTHORIZED MILLER ELECTRIC WARRANTY REPAIR FACILITY. 586-292-1521
Bought this welder brand new about 2-3 years ago for well over 8.000 dollars, The Welder has LESS THAN 30 hours on it! Bought it thinking we would get more Tig work in our shop. Its ready to go and weld. Comes with: Tig torch and hook ups and pedal Cart and watercooler. AC/DC TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Input Power: 205-575V.3 Phase and SINGLE phase, Welding AMP range: 5-350 AMP. A few of is many features- Auto-Line- Allows for any input voltage hook-up(208-575 V) with no manual linking. Providing convenience in any job setting. Fan-On-Demand-cooling system only operates when needed. 120 V auxiliary power receptacle for cooling system or small tools. Program memory features 9 independent program memories that maintain/save your parameters. Will consider shipping if the price is right.
OWNER'S MANUEL only for Miller Dynasty 300 SD. DX, And LX, OM-358 dated September 2000. Manual is in great condition. There are 80 pages of information. Please view photos carefully and contact me with any questions. BUYERS: I have a no questions asked 14-day return policy and great feedback. I f for any reason you have an issue with your purchase. Contact me member-to-member. To do this, click on Order details and then Contact Seller. AT THIS POINT, select"OTHER" and you will be able to email me directly. All other options will open a case against the Seller. Please DO NOT open a case against Granny's unless you are unhappy with my customer service after contacting me with your concerns. As of May. 2014, eBay has changed their policies and any CASE for any reason and regardless of the end resolution, has an adverse effect ... moreon Sellers, both in their rating status and the fees charged by eBay. ECONOMY SHIPPING CAN TAKE UP TO A WEEK + FOR DELIVERY! I ship within 24 hours. 99% of the time, but once the Post Office or Federal Express gets the package, timing of delivery is out of my control. The estimated delivery date given by eBay is not a guarantee, since problems can arise within the delivery systems. Most of my items are from estate sales and auctions and are gently used. I will describe any flaws or imperfections that I detect. In most cases I DO NOT clean the item. But leave that up to the new owner. My goal is to represent the items accurately and conduct a positive transaction. Some descriptions may have typos, for which I apologize! All purchases have a money back guarantee. Make sure you let me know if there is a concern. Colorado residents will pay 2.9% sales tax. SHIPPING COSTS are for the continental USA only. All packages have delivery confirmation and can be tracked through eBay. There are NO handling charges added on to shipping costs. I try and use recycled and/or bio-degradable shipping products if available.
Nolan Miller Designer Beaded jacket and cami top. size 6 good condition. Worn to 2 formal functions and stored in a cool smoke free. Animal free home. Beaded detail and tuffet buttons From the Dynasty show era.
Miller maxstar str 200. Great condition. I bought it and only used a few times
If you want a shipping discount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a Used NO RESERVE auction for a HTP 17 series rigid tig torch with 12.5 feet of superflex cable. The torch has a large 35(1/2" OD) dinse and a 5/8-18 side gas. Perfect for your Miller Dynasty 200dx. Thermal arc 186 or 185 or any other machine that uses this configuration. If you are unsure, please send us an ... moreemail and we will let you know. A 17 series torch is the standard torch found on many tig welders. It uses 10N series Alumina Cups which are about 1 7/8" long. The super flexible one piece cable assembly is 121/2 feet long. This is a 150 amp 100% duty cycle torch. This 17 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shipping by combining purchases with other mig or tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Again. If you want a shipping discount on multiple items, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect s
Vintage Nolan Miller Dynasty collection 3 Piece Suit Size 14. Suit was purchased in May 1987 for $400. It was worn once and put away in plastic ever since. It has beautiful embellishments. There are some small dark spots on the shoulder strap of the cami top and here and there on the suit.
This is a Miller 300DX Dynasty welder. Lightly use some light scuffs. For the last year just sitting.Very little use, is ready to weld. Used it on single phase 230v If you have any question please call my cell at 7082672727- Call me or email me your zip for a quote Thanks Leo
MILLER DYNASTY 200DX TIG WELDER p/n 907099011 Miller Electric factory reconditioned current model Dynasty 200DXTig Welder in excellent condition- photo is of new unit. Comes with 2 year factory warranty- great savings over a new unit. The most popular AC/DC inverter style unit- only 45# so you can take it right to the job. AC/DC unit for welding aluminum. Stainless, mild steel- any weldable metal. DX- When the job demands greater control the DX provides pulse on/off. Pulse frequency, peak% time, background amperage, initial amperage, initial slope time, final slope time and final amperage control. Input Power 3- or 1-Phase Power, TIG Rated Output 200 A at 18 V. 20% Duty Cycle 150 A at 16 V. 60% Duty Cycle, 140 A at 15.6 V. 40% Duty Cycle, 100 A at 14 V. 100% Duty Cycle Stick Rated Output 200 A at 28 V. 20% Duty Cycle 130 A at 25.2 V. 60% ... moreDuty Cycle, 100 A at 24 V. 60% Duty Cycle, 90 A at 23.6 V. 100% Duty Cycle Welding Amperage Range 1-200 Amps(1-150 on 120 VAC) Net Weight 45 lb(20.5 kg) Dynasty 200 DX Quick Reference Guide: 8 ft(2.4 m) primary cord DVD set-up video(2) Dinse 50 mm connectors, Torch adapter(195378) Adjustable shoulder strap, Sutton-Garten Co. is 96 year old welding equipment distributor and an authorized Miller warranty repair facility. We stock a full line of new and used accessory items and can make a complete package. Call 800-686-4674 or email with any questions. Ships UPS to any US 48 state address- email for shipping arrangements and rates to AK/HI/PR or international destinations.
Miller Electric Technical Manual TM-357A Dynasty DX D escription- Model: Dynasty DX- TM-357A- June 1999- Processes: Stick(SMAW) Tig(GTAW) Welding- Effective w/ Serial No: KH384382- Description: Arc Welding Power Source AC/DC. CC- Phase 1& 3- Original manual NOT A COPY NOTE: BUYER ASSUMES ALL LIABILITY FOR ANY INJURY OR PROPERTY DAMAGE RESULTING FROM THE USE. OF THIS TECHNICAL MANUAL. 9836(MI) 08/22/14 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star ... moreservices then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals.
Here we have a used Miller 300DX unit with cart and cooler S/N LG340623L. It has been a really good unit up to this point when the high frequency stopped working. It will try to strike and arc but will not put out correct amps in order to weld and with no error codes on screen. Everything else works properly. I have been told by several individuals they are quite easy to repair and are some of the best older welders Miller has made do to their simplicity circuitry. You are buying a non-working welder so bid accordingly. Buyer pays actual freight shipping. Welder with pallet will be around 300 lbs and will be 48 x 24 x 48. Thanks
Dynasty era 3 piece suit with gorgeous detail. Measurements of garment laying flat Skirt waist 14" Hips 20" Length 29" Slit up the back of skirt 11" Jacket Shoulder to Shoulder 19" Waist 16" Length 26"
Normal 0 false false false EN-US X-NONE X-NONE Vintage 1980 Dynasty Collection Nolan Miller Beaded Skirt Suit–Size 12 This is a very nice vintage 1980s Nolan Miller Skirt Suit in a Cream Color. Size 12. Jacket has beading. Two buttons on each sleeve. Button on front missing. This suit is in great condition of the age. Email with any questions you may have.
This set is in amazing condition! No signs of wear of any kind.the robe looks like it may of been washed(only by the condition of the inside tag) otherwise perfect! It looks like it would fit anyone from a size 0-4 and up to a full C cup. BID WITH CONFIDENCE ALL ITEMS I SELL ARE GUARANTEED AUTHENTIC AND COME FROM A NON-SMOKING HOUSEHOLD. NO INTERNATIONAL SHIPPING.
Used. Miller Dinse Water Tig Torch Adapter 195377(for 18& 20 SERIES TORCH) Dynasty, in good working condition.Free shipping USA! please email any questions, thank you,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-148c981c1dc-0x109-
This Welder Has ONLY 4 Hours of run time on it! It does has have a small dent on the side which is purely cosmetic. It is in absolutely perfect operational condition. This listing is for the welder only. The Miller Dynasty 200DX is a TIG and Stick combination welder perfect for aviation. Fabrication, mechanical contracting, ship/boat and other projects. It offers you maximum flexibility and combines advanced inverter technology with Auto-Line technology. It is the most flexible AC/DC TIG/Stick power supply in the welding industry. The Advanced Squarewave arc removes the need for a continuous high frequency to improve weldability for aluminum and magnesium on low power. Squarewave arc and extended balance control allows you to control the duration of the electrode negative portion of the cycle to from 30% to 90% Providing you with precise ... morecleaning control and a longer tungsten life. The fan-on-demand cooling system only runs the fan when required. This produces less contaminants. Saves energy, and produces less noise. The Miller Dynasty 200DX TIG/Stick provides superior arc performance on all input voltage. Input Power. 3- or 1-Phase Power. TIG Rated Output. 200 A at 18 V. 20% Duty Cycle. 150 A at 16 V. 60% Duty Cycle. 140 A at 15.6 V. 40% Duty Cycle. 100 A at 14 V. 100% Duty Cycle. Stick Rated Output. 200 A at 28 V. 20% Duty Cycle. 130 A at 25.2 V. 60% Duty Cycle. 100 A at 24 V. 60% Duty Cycle. 90 A at 23.6 V. 100% Duty Cycle. Welding Amperage Range. 1-200 Amps(1-150 on 120 VAC) Net Weight. Net Weight. 45 lb(20.5 kg) Processes. TIG(GTAW) DC. TIG(GTAW) AC. Stick(SMAW) DC. Stick(SMAW) AC. Air Carbon Arc Cutting and Gouging(CAC-A)
Like New Miller Dynasty 200 DX Tig/Stick Welder Serial Number: LF229994 Stock/Model Number 907099-01 Not Included In Sale: No tig torch OR attachement/Plug included(Better finding one to your applcation) No power plug included 115v/230v/400v/460v applicable(Better finding one for your application) No cooler included[some sell with cooler for a"Complete set" Check my listing. Have coolmate 3 115v for sale aswell can sell both together. Send TEXT offers to(716)997-5968 Included In Sale: Unit Itself Miller Dynasty 200 DX Prestine Cosmetic/Mechanical Condition[Model: 907099-01] Ground cable with connector to unit and clasp for your metal- Miller Foot Pedal[Model: RFXS-14HD] Oxweld Type R 6007 661 Regulator and[flowmeter Linde L32] Airco Gauge# 8410091- Unit free shipping NO Warranty. Bid with confidence. you're not getting anymore ... moreor any less all sales are final. PLEASE VEIW PICTURES CAREFULLY AND ASK A QUESTION IF YOU HAVE ONE. Dynasty 200 DX* The DX offers pulse on/off. Pulse frequency, peak% time, background amperage, initial amperage, initial slope time, final slope time and final amperage control. Lift-Arc™ starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. Advance Squarewave provides a fast freezing puddle. Deep penetration, and fast travel speeds. Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action. Sine wave is for customers that like a traditional arc. It is quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds. For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity. Allows for any input voltage hookup(115-460 V) with no manual linking. Providing convenience in any job setting. Ideal solution for dirty or unreliable power. Extended AC balance(30-99% controls the amount of oxide cleaning(amperage
MILLER DYNASTY 200 TIG STICK WELDER WITH LEADS GREAT PRICE! LISTING IS FOR A MILLER DYNASTY 200 WELDER. THIS UNIT SHOWS NORMAL WEAR AND HANDLING. UNIT WAS RECENTLY TESTED/USED AND IS WORKING AS INTENDED. LISTING IS FOR THE WELDER. LEADS AND EVERYTHING PICTURED. COMES EXACTLY AS SHOWN IN THE PICTURES. SATISFACTION GUARANTEED. FREE SHIPPING! PAYMENT IS DUE AT THE TIME OF PURCHASE OR ITEM WILL BE RELISTED SAME DAY. NO E-CHECKS ACCEPTED. NO EXCEPTIONS. IF YOU HAVE ANY QUESTIONS PLEASE EMAIL US AT ANY TIME. WE SHIP ALL ITEMS WITHIN 3 BUSINESS DAYS OF AUCTION END VIA FED-EX GROUND.
RIMCO ROBERT IVENS MACHINERY COMPANY 613 W. Bruce St. Milwaukee WI 53204 414-272-6686 Welcome to Robert Ivens Machinery Company Our Mission: Productive and Satisfied Customers. Up for AUCTION: MILLER DYNASTY 200 W/TIG RUNNER PACKAGE AND CART In EXCELLENT/used condition No bends. Cracks, or repairs VERY CLEAN I purchased this from a man who used it for one job and never touched it again- I used it here for some light work and then got a heavier unit I always kept the machine covered Tig torch is the Miller"Diamond back" Tig torch comes with a small kit of extras(new) Includes finger tip control and pedal control Includes extra ground leads Has a stick welding whip with Tweeko electrode holder Cart is the stock cart with some extra hooks added Also has original manual You are welcome to come and try it out- it works well! Check photos ... morefor details Email us with any questions! WE COMBINE SHIPPING! Check out my! Be sure to add me to your! Robert Ivens Machinery Company(RIMCO) is Wisconsin's largest dealer in used woodworking machinery A sole proprietorship in business for more than twenty-five years, RIMCO's business philosophy is based upon value and customer satisfaction. If you have an interest in woodworking machinery. You are welcome to call and ask about our extensive. Ever changing inventory. Your business will be most appreciated.
This is how I purchased the package and with addtional REO stat finger control. 2 boxes 4043 filler, 2lbs titanium filler(used 1/3 of a single rod) tungsten tip, diffusers and tons of consumables I spent over $9,000. I just don't use it, my welder quite shortly after purchase and went on to other things and it's just collecting dust. It needs a good home! Base package bellow not including the additional options above Dynasty 280: Complete Pkg w/Foot Control(Water Cooled) 951466 Package Details Comes Complete With: Dynasty 280 power source with CPS 8 ft(2.4 m) primary cord Quick reference guide(English) Coolmate™ 1.3 Coolant(2 one-gallon bottles of#043 810) Small runner cart Remote foot control(194 744) Weldcraft® W-280(WP-280) torch kit(300 990) 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-149a868c92a-0x113-
Miller Dynasty 280 with CPS TIGRunner with CPS Miller Stock#907537002. Serial no. ME090159L This listing is for a factory reconditioned unit and holds a two-year warranty through Miller Electric. The unit is complete. Other than torch coolant. Industrial Applications: Precision Fabrication Heavy Fabrication Pipe and Tube Fabrication Aerospace Aluminum Ship Repair Anodized Aluminum Fabrication Processes include: AC/DC Tig(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) and Air Carbon Arc(CAC-A) AC TIG Features Balance control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds. These models provide extended ranges. Frequency controls the width of the arc cone and can improve directional control of the arc. AC Waveforms: Advanced squarewave. Fast freezing puddle, deep penetration and fast travel speeds. ... moreSoft squarewave for a soft buttery arc with maximum puddle control and good wetting action. Sine wave for customers that like a traditional arc. Quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. Fast travel speeds. DC TIG Features Exceptionally smooth and precise arc for welding exotic materials. Other Features: Lift-Arc™ start provides AC or DC arc initiation without the use of high frequency. Blue Lightning™ high-frequency(HF) arcstarter for non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Comes complete with: Dynasty 280 power source with CPS(Cooler Power Source) Quick Reference Guide 8 ft(2.4 m) primary cord Small Runner Cart Coolmate™ 1.3 water cooler Two(2) 50mm Dinse Connectors Torch coolant. Foot control, and torch all sold separately. Call us to complete your package! We offer discounted shipping rates to the continental 48 states. To receive a quote on the shipping charges. Just send us an e-mail with your zip code. Please indicate if this is a business, residence, or farm and whether a forklift is available at the time of delive
Miller Dynasty 300DX TigRunner Welder with Cool Mate Cooler This is a used welding machine in working condition. It was just calibrated in January of this year. This welder was used at a local fabrication business that recently closed their doors. This is the Tig Runner package and includes the Miller CoolMate TIG torch cooler. The leads and water-cooled torch are included(torch has no collets installed) The Miller cart is welded to a larger cart. Everything seen in the pictures are included in the sale. This machine can be used as a"stick" welder or TIG welder. It can be connected to 3 phase or single phase power which is great for small shops. It has adjustable AC and DC current with high frequency AC available. It is very versatile machine that can be used to stick weld steel. TIG weld anodized aluminum, and everything in between. ... moreThis machine is the standard for welding boat T-tops. Towers, leaning posts, and other anodized aluminum piping. The high amperage and high frequency AC is critical for this type of welding. If you have any questions. Call me at(910) 547-7302 We will offer a 14-day warranty to insure this welder meets your expectations. We have a 100% satisfaction rating. So buy with confidence! Thanks! PS- Check out our eBay Store for the other items up for sale: http:stores.ebay.com/LiquidAddictionMarine
JOAN COLLINS SEXY PINK BEADED NOLAN MILLER GOWN This floor length evening gown was created by famed designer Nolan Miller. The gown made of beautiful silk jersey and has a wrapped front. The right side crossing over forming a sexy"V" neck, closed at the waist with two Velcro strips. The skirt is open to the floor, with a hand beaded edge in hot pink rocaille beads, large faceted pink rounds, and silver and pink sequins. The colored beading is outlined with a row of silver bugle beads. With signature"Dynasty" padded shoulders and straight sleeve flaring at the elbow, beaded as the skirt front. The bodice back is shaped with two darts, and the gown is fully lined in hot pink jersey. Comes with a matching 2" beaded belt. A sexy, truly diva-like gown worn by Joan Collins herself. Nolan Miller designed this special dressing ... moregown for the"Dynasty Reunion" It was to be filmed in a segment in Seattle. But heavy rain resulted in a costume switch, so the gown was not seen in the TV special. However, Joan Collins wore the dazzling designer gown personally. The dressing gown is in fine condition with a small ink mark at the waist(covered by the belt) and at the right shoulder and a few missing beads on the left arm. Truly a great designer made piece of TV history! Comes with a Certificate of Authenticity from Nolan Miller a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-149bacb5b67-0x103-
FOR SALE PRE-ONWED The center port on the welder between the ground and torch/electrode ports is for a controller like a foot pedal or finger tip controller. The port does not work. It could be a simple problem with the port or wiring, but more likely it is one of the circuit boards HAS A MINOR SIGN OF COSMETIC WEAR USED FEW TIMES MILLER DYNASTY 200 SD SERIES TIG/STICK AC/DC WELDER COMES WITH EVERYTHING YOU SEE IN THE PHOTO LISTINGS POWER AC ADAPTER IS MISSING WIRES STICKING OUT. PROCESSES TIG(GTAW) DC, TIG(GTAW) AC, Pulsed TIG(GTAW-P) AC- Not available on SD model, Pulsed TIG(GTAW-P) DC- Not available on SD model, Stick(SMAW) DC, Stick(SMAW) AC, Air Carbon Arc Cutting and Gouging(CAC-A) MATERIAL TYPE Max 1/4 in(6.4 mm) Steel, Min 0.004 in(0.1 mm) Max 1/4 in(6.4 mm) Aluminum, Min 0.020 in(0.5 mm) GENERAL SPECIFICATIONS Input Power, Requires ... more3- or 1-Phase Power, Rated Output, TIG 150 A at 16 V. 60% Duty Cycle(1 or 3-Phase) 140 A at 15.6 V. 40% Duty Cycle(115 VAC) 100 A at 14 V. 100% Duty Cycle(115 VAC) Stick 130 A at 25.2 V. 60% Duty Cycle(1 or 3-Phase) 100 A at 24 V. 60% Duty Cycle(115 VAC) 90 A at 23.6 V. 100% Duty Cycle(115 VAC) Welding Amperage Range, 1-200 Amps(1-150 on 120 VAC) Net Weight, 45 lb(20.5 kg) SHIPPING ONLY IN THE UNITED STATES& CANADA IF YOU ARE NOT HAPPY WITH YOUR PURCHASE AND WANT A FULL REFUND PLEASE CONTACT US BEFORE OPENING UP ANY CASE. YOU WILL BE REFUNDED 100% OFF THE TOTAL AMOUNT! CUSTOMER SERVICE IS OUR NUMBER ONE PRIORITY
This miller dx 200 dynasty was used for 1 project which was a aluminum sports wheelchair and have not used it since. This unit works flawlessly and is the top of the line unit. Everything you see in photos is what comes with the unit. The Miller Dynasty 200 DX TIG Welder and Air-Cooled Contractor Kit with Foot Control offers pulse on/off. Pulse frequency, peak duty cycle, background amperage, initial amperage, initial slope time, final slope time and final amperage control. Wireless Remote Control Compatible Improve productivity. Eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Lift-Arc Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. Blue Lightning- ... moreHigh Frequency Arc Starter For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity. Auto-Line Power Management Technology Allows for any input voltage hookup(115-460 V) with no manual linking. Providing convenience in any job setting. Ideal solution for dirty or unreliable. AC Waveforms• Advance Squarewave provides a fast freezing puddle. Deep penetration, and fast travel speeds. Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action. Sine wave is for customers that like a traditional arc. It is quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds. AC and DC TIG Features• Extended AC balance(30-99% controls the amount of oxide cleaning(amperage time in EN) which is essential for high quality welds on aluminum. AC frequency(20-250 hz) controls the width of the arc cone and the force of the arc. DC TIG provides exceptionally smooth and precise arc for welding exotic materials. Stick Features(AC/DC) Tailored arc control(DIG)
From 2011. Here is the Dynasty Joan Collins/Alexis Carrington Barbie. There is no box. Outfit is complete with shoes and stand. Hair could use a little restyling. This is from an original owner. She liked to display her dolls without the boxes. Please check my other listings for more great dolls from this collection. Please email with questions before auction ends. There is no reserve. So high bidder wins! Now for the fine print: INTERNATIONAL BIDDERS Items will be sent only to the countries listed in the auction. Shipping method must provide the required online viewable tracking for PAYPAL seller protection. I absolutely cannot ship without tracking~ Sorry but customs fees and taxes are the buyer's responsibility and it is illegal to lower the item value or declare it as a"gift" Orders above $250.00 OR with a weight more than ... morethe First Class International limit of 4 pounds MUST be sent Express Mail with signature confirmation~ CONDITION I do not rate items as"mint" unless they are still NRFB or I have removed them from the original package myself. Items are kept in my non-smoking home but I cannot guarantee the previous environment was also smoke or pet free. Any odors detected will be addressed in the description. PAYMENT& SHIPPING Payment must be received within four days. After that. The ebay automatic unpaid item assistant will begin. Shipping is normally within ONE business day of cleared payment excluding weekends or holidays. Package will be sent to the address provided on your PAYPAL payment only. I ALWAYS combine shipping whenever possible and there are NEVER added"handling" fees. If you have won multiple auctions. Please wait for a combined invoice. RETURNS Returns are accepted within 14 days. Items must be in the same condition as sent and will receive a full refund upon receipt. NO PARTIAL REFUNDS! Please contact me before leaving less than positive feedback or less than 5 stars on any of the detailed seller ratings. I will do my best to work out any problems but
Miller Dynasty 350: TIGRunner Pkg(Water Cooled)Complete Stock Number 907204001 3 to 350 Amps Output Listed New At Lincoln For $9.934.00 Plus Tax All The Latest Technology! There Are Lots Of Really Good Videos On You Tube Explaining All The Functions And Uses This Welder Can Be Used For Tig And Stick Welding(See Bottom Of This Ad) Best You Can Buy- Like New Condition- Used As Home Hobby Welder Only Try Before You Buy- I have plenty of metal(All Sizes) Gas, And Rod- Try it to your hearts content, Before You Buy! Every Thing Works Like New 220 Volts- Single Phase- 40 AMPs When Set At Or Below 180 AMPs 100% Duty Cycle! Using Only 32 AMPs Input USES- TIG(GTAW) DC TIG(GTAW) AC Pulsed TIG(GTAW-P) AC Pulsed TIG(GTAW-P) DC Stick(SMAW) DC Stick(SMAW) AC Air Carbon Arc Cutting and Gouging(CAC-A) There Are Lots Of Really Good Videos On You Tube Explaining ... moreAll The Functions And Uses Any Questions Feel Free To Call I should mention the only reason I am selling it is because I am now 67 and can't see good enough to use it anymore: Click On Ask Seller A Question- I Will Give You My Phone Number. We Can Make Payment And Pick Up Arrangements Immediately YOU DON'T PAY TILL YOU HAVE TRIED MACHINE AND ALL FUNCTIONS: If You Use The PayPal Option You Can Not Pick Up Welder Till The Payment Clears My Bank And That Can Take A While.